diff options
Diffstat (limited to 'Documentation/git-push.txt')
| -rw-r--r-- | Documentation/git-push.txt | 129 |
1 files changed, 79 insertions, 50 deletions
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index e3eb1e8f19..aede48877f 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -10,8 +10,8 @@ SYNOPSIS -------- [verse] 'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] - [--repo=<repository>] [-f | --force] [-v | --verbose] - [<repository> <refspec>...] + [--repo=<repository>] [-f | --force] [-v | --verbose] [-u | --set-upstream] + [<repository> [<refspec>...]] DESCRIPTION ----------- @@ -41,7 +41,7 @@ OPTIONS[[OPTIONS]] + The <src> is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as `master~4` or -`HEAD` (see linkgit:git-rev-parse[1]). +`HEAD` (see linkgit:gitrevisions[7]). + The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must @@ -69,11 +69,11 @@ nor in any Push line of the corresponding remotes file---see below). --all:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/heads/` be pushed. + refs under `refs/heads/` be pushed. --mirror:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/` (which includes but is not + refs under `refs/` (which includes but is not limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally updated refs @@ -96,7 +96,7 @@ nor in any Push line of the corresponding remotes file---see below). the same as prefixing all refs with a colon. --tags:: - All refs under `$GIT_DIR/refs/tags` are pushed, in + All refs under `refs/tags` are pushed, in addition to refspecs explicitly listed on the command line. @@ -116,7 +116,7 @@ nor in any Push line of the corresponding remotes file---see below). --repo=<repository>:: This option is only relevant if no <repository> argument is - passed in the invocation. In this case, 'git-push' derives the + passed in the invocation. In this case, 'git push' derives the remote name from the current branch: If it tracks a remote branch, then that remote repository is pushed to. Otherwise, the name "origin" is used. For this latter case, this option @@ -130,22 +130,43 @@ git push --repo=public #2 + is that #1 always pushes to "public" whereas #2 pushes to "public" only if the current branch does not track a remote branch. This is -useful if you write an alias or script around 'git-push'. +useful if you write an alias or script around 'git push'. + +-u:: +--set-upstream:: + For every branch that is up to date or successfully pushed, add + upstream (tracking) reference, used by argument-less + linkgit:git-pull[1] and other commands. For more information, + see 'branch.<name>.merge' in linkgit:git-config[1]. --thin:: --no-thin:: - These options are passed to 'git-send-pack'. Thin - transfer spends extra cycles to minimize the number of - objects to be sent and meant to be used on slower connection. + These options are passed to linkgit:git-send-pack[1]. A thin transfer + significantly reduces the amount of sent data when the sender and + receiver share many of the same objects in common. The default is + \--thin. + +-q:: +--quiet:: + Suppress all output, including the listing of updated refs, + unless an error occurs. Progress is not reported to the standard + error stream. -v:: --verbose:: Run verbosely. --q:: ---quiet:: - Suppress all output, including the listing of updated refs, - unless an error occurs. +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. + +--recurse-submodules=check:: + Check whether all submodule commits used by the revisions to be + pushed are available on a remote tracking branch. Otherwise the + push will be aborted and the command will exit with non-zero status. + include::urls-remotes.txt[] @@ -169,27 +190,45 @@ If --porcelain is used, then each line of the output is of the form: <flag> \t <from>:<to> \t <summary> (<reason>) ------------------------------- +The status of up-to-date refs is shown only if --porcelain or --verbose +option is used. + flag:: - A single character indicating the status of the ref. This is - blank for a successfully pushed ref, `!` for a ref that was - rejected or failed to push, and '=' for a ref that was up to - date and did not need pushing (note that the status of up to - date refs is shown only when `git push` is running verbosely). + A single character indicating the status of the ref: +(space);; for a successfully pushed fast-forward; +`{plus}`;; for a successful forced update; +`-`;; for a successfully deleted ref; +`*`;; for a successfully pushed new ref; +`!`;; for a ref that was rejected or failed to push; and +`=`;; for a ref that was up to date and did not need pushing. summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>...<new>` for forced non-fast-forward updates). For a - failed update, more details are given for the failure. - The string `rejected` indicates that git did not try to send the - ref at all (typically because it is not a fast-forward). The - string `remote rejected` indicates that the remote end refused - the update; this rejection is typically caused by a hook on the - remote side. The string `remote failure` indicates that the - remote end did not report the successful update of the ref - (perhaps because of a temporary error on the remote side, a - break in the network connection, or other transient error). + `<old>\...<new>` for forced non-fast-forward updates). ++ +For a failed update, more details are given: ++ +-- +rejected:: + Git did not try to send the ref at all, typically because it + is not a fast-forward and you did not force the update. + +remote rejected:: + The remote end refused the update. Usually caused by a hook + on the remote side, or because the remote repository has one + of the following safety options in effect: + `receive.denyCurrentBranch` (for pushes to the checked out + branch), `receive.denyNonFastForwards` (for forced + non-fast-forward updates), `receive.denyDeletes` or + `receive.denyDeleteCurrent`. See linkgit:git-config[1]. + +remote failure:: + The remote end did not report the successful update of the ref, + perhaps because of a temporary error on the remote side, a + break in the network connection, or other transient error. +-- from:: The name of the local ref being pushed, minus its @@ -294,12 +333,12 @@ a case where you do mean to lose history. Examples -------- -git push:: +`git push`:: Works like `git push <remote>`, where <remote> is the current branch's remote (or `origin`, if no remote is configured for the current branch). -git push origin:: +`git push origin`:: Without additional configuration, works like `git push origin :`. + @@ -311,45 +350,45 @@ use `git config remote.origin.push HEAD`. Any valid <refspec> (like the ones in the examples below) can be configured as the default for `git push origin`. -git push origin ::: +`git push origin :`:: Push "matching" branches to `origin`. See <refspec> in the <<OPTIONS,OPTIONS>> section above for a description of "matching" branches. -git push origin master:: +`git push origin master`:: Find a ref that matches `master` in the source repository (most likely, it would find `refs/heads/master`), and update the same ref (e.g. `refs/heads/master`) in `origin` repository with it. If `master` did not exist remotely, it would be created. -git push origin HEAD:: +`git push origin HEAD`:: A handy way to push the current branch to the same name on the remote. -git push origin master:satellite/master dev:satellite/dev:: +`git push origin master:satellite/master dev:satellite/dev`:: Use the source ref that matches `master` (e.g. `refs/heads/master`) to update the ref that matches `satellite/master` (most probably `refs/remotes/satellite/master`) in the `origin` repository, then do the same for `dev` and `satellite/dev`. -git push origin HEAD:master:: +`git push origin HEAD:master`:: Push the current branch to the remote ref matching `master` in the `origin` repository. This form is convenient to push the current branch without thinking about its local name. -git push origin master:refs/heads/experimental:: +`git push origin master:refs/heads/experimental`:: Create the branch `experimental` in the `origin` repository by copying the current `master` branch. This form is only needed to create a new branch or tag in the remote repository when the local name and the remote name are different; otherwise, the ref name on its own will work. -git push origin :experimental:: +`git push origin :experimental`:: Find a ref that matches `experimental` in the `origin` repository (e.g. `refs/heads/experimental`), and delete it. -git push origin {plus}dev:master:: +`git push origin {plus}dev:master`:: Update the origin repository's master branch with the dev branch, allowing non-fast-forward updates. *This can leave unreferenced commits dangling in the origin repository.* Consider the @@ -373,16 +412,6 @@ Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a `git gc` command on the origin repository. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com>, later rewritten in C -by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite |