diff options
Diffstat (limited to 'Documentation/git-push.txt')
| -rw-r--r-- | Documentation/git-push.txt | 320 |
1 files changed, 229 insertions, 91 deletions
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index c63932b16c..e1a46a7958 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -9,9 +9,11 @@ git-push - Update remote refs along with associated objects SYNOPSIS -------- [verse] -'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] - [--repo=<repository>] [-f | --force] [-v | --verbose] [-u | --set-upstream] - [<repository> <refspec>...] +'git push' [--all | --mirror | --tags] [--follow-tags] [--atomic] [-n | --dry-run] [--receive-pack=<git-receive-pack>] + [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] + [-u | --set-upstream] [--signed] + [--force-with-lease[=<refname>[:<expect>]]] + [--no-verify] [<repository> [<refspec>...]] DESCRIPTION ----------- @@ -23,6 +25,17 @@ You can make interesting things happen to a repository every time you push into it, by setting up 'hooks' there. See documentation for linkgit:git-receive-pack[1]. +When the command line does not specify where to push with the +`<repository>` argument, `branch.*.remote` configuration for the +current branch is consulted to determine where to push. If the +configuration is missing, it defaults to 'origin'. + +When the command line does not specify what to push with `<refspec>...` +arguments or `--all`, `--mirror`, `--tags` options, the command finds +the default `<refspec>` by consulting `remote.*.push` configuration, +and if it is not found, honors `push.default` configuration to decide +what to push (See linkgit:git-config[1] for the meaning of `push.default`). + OPTIONS[[OPTIONS]] ------------------ @@ -33,26 +46,31 @@ OPTIONS[[OPTIONS]] of a remote (see the section <<REMOTES,REMOTES>> below). <refspec>...:: + Specify what destination ref to update with what source object. The format of a <refspec> parameter is an optional plus - `{plus}`, followed by the source ref <src>, followed + `+`, followed by the source object <src>, followed by a colon `:`, followed by the destination ref <dst>. - It is used to specify with what <src> object the <dst> ref - in the remote repository is to be updated. + The <src> is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as `master~4` or -`HEAD` (see linkgit:git-rev-parse[1]). +`HEAD` (see linkgit:gitrevisions[7]). + The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must -be named. If `:`<dst> is omitted, the same ref as <src> will be -updated. +be named. +If `git push [<repository>]` without any `<refspec>` argument is set to +update some ref at the destination with `<src>` with +`remote.<repository>.push` configuration variable, `:<dst>` part can +be omitted---such a push will update a ref that `<src>` normally updates +without any `<refspec>` on the command line. Otherwise, missing +`:<dst>` means to update the same ref as the `<src>`. + The object referenced by <src> is used to update the <dst> reference -on the remote side, but by default this is only allowed if the -update can fast-forward <dst>. By having the optional leading `{plus}`, -you can tell git to update the <dst> ref even when the update is not a -fast-forward. This does *not* attempt to merge <src> into <dst>. See +on the remote side. By default this is only allowed if <dst> is not +a tag (annotated or lightweight), and then only if it can fast-forward +<dst>. By having the optional leading `+`, you can tell Git to update +the <dst> ref even if it is not allowed by default (e.g., it is not a +fast-forward.) This does *not* attempt to merge <src> into <dst>. See EXAMPLES below for details. + `tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. @@ -60,20 +78,26 @@ EXAMPLES below for details. Pushing an empty <src> allows you to delete the <dst> ref from the remote repository. + -The special refspec `:` (or `{plus}:` to allow non-fast-forward updates) -directs git to push "matching" branches: for every branch that exists on +The special refspec `:` (or `+:` to allow non-fast-forward updates) +directs Git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name -already exists on the remote side. This is the default operation mode -if no explicit refspec is found (that is neither on the command line -nor in any Push line of the corresponding remotes file---see below). +already exists on the remote side. --all:: - Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/heads/` be pushed. + Push all branches (i.e. refs under `refs/heads/`); cannot be + used with other <refspec>. + +--prune:: + Remove remote branches that don't have a local counterpart. For example + a remote branch `tmp` will be removed if a local branch with the same + name doesn't exist any more. This also respects refspecs, e.g. + `git push --prune remote refs/heads/*:refs/tmp/*` would + make sure that remote `refs/tmp/foo` will be removed if `refs/heads/foo` + doesn't exist. --mirror:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/` (which includes but is not + refs under `refs/` (which includes but is not limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally updated refs @@ -96,10 +120,27 @@ nor in any Push line of the corresponding remotes file---see below). the same as prefixing all refs with a colon. --tags:: - All refs under `$GIT_DIR/refs/tags` are pushed, in + All refs under `refs/tags` are pushed, in addition to refspecs explicitly listed on the command line. +--follow-tags:: + Push all the refs that would be pushed without this option, + and also push annotated tags in `refs/tags` that are missing + from the remote but are pointing at commit-ish that are + reachable from the refs being pushed. + +--signed:: + GPG-sign the push request to update refs on the receiving + side, to allow it to be checked by the hooks and/or be + logged. See linkgit:git-receive-pack[1] for the details + on the receiving end. + +--[no-]atomic:: + Use an atomic transaction on the remote side if available. + Either all refs are updated, or on error, no refs are updated. + If the server does not support atomic pushes the push will fail. + --receive-pack=<git-receive-pack>:: --exec=<git-receive-pack>:: Path to the 'git-receive-pack' program on the remote @@ -107,21 +148,79 @@ nor in any Push line of the corresponding remotes file---see below). repository over ssh, and you do not have the program in a directory on the default $PATH. +--[no-]force-with-lease:: +--force-with-lease=<refname>:: +--force-with-lease=<refname>:<expect>:: + Usually, "git push" refuses to update a remote ref that is + not an ancestor of the local ref used to overwrite it. ++ +This option bypasses the check, but instead requires that the +current value of the ref to be the expected value. "git push" +fails otherwise. ++ +Imagine that you have to rebase what you have already published. +You will have to bypass the "must fast-forward" rule in order to +replace the history you originally published with the rebased history. +If somebody else built on top of your original history while you are +rebasing, the tip of the branch at the remote may advance with her +commit, and blindly pushing with `--force` will lose her work. ++ +This option allows you to say that you expect the history you are +updating is what you rebased and want to replace. If the remote ref +still points at the commit you specified, you can be sure that no +other people did anything to the ref (it is like taking a "lease" on +the ref without explicitly locking it, and you update the ref while +making sure that your earlier "lease" is still valid). ++ +`--force-with-lease` alone, without specifying the details, will protect +all remote refs that are going to be updated by requiring their +current value to be the same as the remote-tracking branch we have +for them, unless specified with a `--force-with-lease=<refname>:<expect>` +option that explicitly states what the expected value is. ++ +`--force-with-lease=<refname>`, without specifying the expected value, will +protect the named ref (alone), if it is going to be updated, by +requiring its current value to be the same as the remote-tracking +branch we have for it. ++ +`--force-with-lease=<refname>:<expect>` will protect the named ref (alone), +if it is going to be updated, by requiring its current value to be +the same as the specified value <expect> (which is allowed to be +different from the remote-tracking branch we have for the refname, +or we do not even have to have such a remote-tracking branch when +this form is used). ++ +Note that all forms other than `--force-with-lease=<refname>:<expect>` +that specifies the expected current value of the ref explicitly are +still experimental and their semantics may change as we gain experience +with this feature. ++ +"--no-force-with-lease" will cancel all the previous --force-with-lease on the +command line. + -f:: --force:: Usually, the command refuses to update a remote ref that is not an ancestor of the local ref used to overwrite it. - This flag disables the check. This can cause the - remote repository to lose commits; use it with care. + Also, when `--force-with-lease` option is used, the command refuses + to update a remote ref whose current value does not match + what is expected. ++ +This flag disables these checks, and can cause the remote repository +to lose commits; use it with care. ++ +Note that `--force` applies to all the refs that are pushed, hence +using it with `push.default` set to `matching` or with multiple push +destinations configured with `remote.*.push` may overwrite refs +other than the current branch (including local refs that are +strictly behind their remote counterpart). To force a push to only +one branch, use a `+` in front of the refspec to push (e.g `git push +origin +master` to force a push to the `master` branch). See the +`<refspec>...` section above for details. --repo=<repository>:: - This option is only relevant if no <repository> argument is - passed in the invocation. In this case, 'git push' derives the - remote name from the current branch: If it tracks a remote - branch, then that remote repository is pushed to. Otherwise, - the name "origin" is used. For this latter case, this option - can be used to override the name "origin". In other words, - the difference between these two commands + This option is equivalent to the <repository> argument. If both + are specified, the command-line argument takes precedence. -u:: --set-upstream:: @@ -129,30 +228,45 @@ nor in any Push line of the corresponding remotes file---see below). upstream (tracking) reference, used by argument-less linkgit:git-pull[1] and other commands. For more information, see 'branch.<name>.merge' in linkgit:git-config[1]. -+ --------------------------- -git push public #1 -git push --repo=public #2 --------------------------- -+ -is that #1 always pushes to "public" whereas #2 pushes to "public" -only if the current branch does not track a remote branch. This is -useful if you write an alias or script around 'git push'. ---thin:: ---no-thin:: - These options are passed to 'git send-pack'. Thin - transfer spends extra cycles to minimize the number of - objects to be sent and meant to be used on slower connection. +--[no-]thin:: + These options are passed to linkgit:git-send-pack[1]. A thin transfer + significantly reduces the amount of sent data when the sender and + receiver share many of the same objects in common. The default is + \--thin. + +-q:: +--quiet:: + Suppress all output, including the listing of updated refs, + unless an error occurs. Progress is not reported to the standard + error stream. -v:: --verbose:: Run verbosely. --q:: ---quiet:: - Suppress all output, including the listing of updated refs, - unless an error occurs. +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. + +--recurse-submodules=check|on-demand:: + Make sure all submodule commits used by the revisions to be + pushed are available on a remote-tracking branch. If 'check' is + used Git will verify that all submodule commits that changed in + the revisions to be pushed are available on at least one remote + of the submodule. If any commits are missing the push will be + aborted and exit with non-zero status. If 'on-demand' is used + all submodules that changed in the revisions to be pushed will + be pushed. If on-demand was not able to push all necessary + revisions it will also be aborted and exit with non-zero status. + +--[no-]verify:: + Toggle the pre-push hook (see linkgit:githooks[5]). The + default is \--verify, giving the hook a chance to prevent the + push. With \--no-verify, the hook is bypassed completely. + include::urls-remotes.txt[] @@ -160,7 +274,7 @@ OUTPUT ------ The output of "git push" depends on the transport method used; this -section describes the output when pushing over the git protocol (either +section describes the output when pushing over the Git protocol (either locally or via ssh). The status of the push is output in tabular form, with each line @@ -176,27 +290,45 @@ If --porcelain is used, then each line of the output is of the form: <flag> \t <from>:<to> \t <summary> (<reason>) ------------------------------- +The status of up-to-date refs is shown only if --porcelain or --verbose +option is used. + flag:: - A single character indicating the status of the ref. This is - blank for a successfully pushed ref, `!` for a ref that was - rejected or failed to push, and '=' for a ref that was up to - date and did not need pushing (note that the status of up to - date refs is shown only when `git push` is running verbosely). + A single character indicating the status of the ref: +(space);; for a successfully pushed fast-forward; +`+`;; for a successful forced update; +`-`;; for a successfully deleted ref; +`*`;; for a successfully pushed new ref; +`!`;; for a ref that was rejected or failed to push; and +`=`;; for a ref that was up to date and did not need pushing. summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>...<new>` for forced non-fast-forward updates). For a - failed update, more details are given for the failure. - The string `rejected` indicates that git did not try to send the - ref at all (typically because it is not a fast-forward). The - string `remote rejected` indicates that the remote end refused - the update; this rejection is typically caused by a hook on the - remote side. The string `remote failure` indicates that the - remote end did not report the successful update of the ref - (perhaps because of a temporary error on the remote side, a - break in the network connection, or other transient error). + `<old>...<new>` for forced non-fast-forward updates). ++ +For a failed update, more details are given: ++ +-- +rejected:: + Git did not try to send the ref at all, typically because it + is not a fast-forward and you did not force the update. + +remote rejected:: + The remote end refused the update. Usually caused by a hook + on the remote side, or because the remote repository has one + of the following safety options in effect: + `receive.denyCurrentBranch` (for pushes to the checked out + branch), `receive.denyNonFastForwards` (for forced + non-fast-forward updates), `receive.denyDeletes` or + `receive.denyDeleteCurrent`. See linkgit:git-config[1]. + +remote failure:: + The remote end did not report the successful update of the ref, + perhaps because of a temporary error on the remote side, a + break in the network connection, or other transient error. +-- from:: The name of the local ref being pushed, minus its @@ -237,7 +369,8 @@ leading to commit A. The history looks like this: ---------------- Further suppose that the other person already pushed changes leading to A -back to the original repository you two obtained the original commit X. +back to the original repository from which you two obtained the original +commit X. The push done by the other person updated the branch that used to point at commit X to point at commit A. It is a fast-forward. @@ -250,7 +383,7 @@ will now start building on top of B. The command by default does not allow an update that is not a fast-forward to prevent such loss of history. -If you do not want to lose your work (history from X to B) nor the work by +If you do not want to lose your work (history from X to B) or the work by the other person (history from X to A), you would need to first fetch the history from the repository, create a history that contains changes done by both parties, and push the result back. @@ -301,62 +434,77 @@ a case where you do mean to lose history. Examples -------- -git push:: +`git push`:: Works like `git push <remote>`, where <remote> is the current branch's remote (or `origin`, if no remote is configured for the current branch). -git push origin:: - Without additional configuration, works like - `git push origin :`. +`git push origin`:: + Without additional configuration, pushes the current branch to + the configured upstream (`remote.origin.merge` configuration + variable) if it has the same name as the current branch, and + errors out without pushing otherwise. + The default behavior of this command when no <refspec> is given can be -configured by setting the `push` option of the remote. +configured by setting the `push` option of the remote, or the `push.default` +configuration variable. + For example, to default to pushing only the current branch to `origin` use `git config remote.origin.push HEAD`. Any valid <refspec> (like the ones in the examples below) can be configured as the default for `git push origin`. -git push origin ::: +`git push origin :`:: Push "matching" branches to `origin`. See <refspec> in the <<OPTIONS,OPTIONS>> section above for a description of "matching" branches. -git push origin master:: +`git push origin master`:: Find a ref that matches `master` in the source repository (most likely, it would find `refs/heads/master`), and update the same ref (e.g. `refs/heads/master`) in `origin` repository with it. If `master` did not exist remotely, it would be created. -git push origin HEAD:: +`git push origin HEAD`:: A handy way to push the current branch to the same name on the remote. -git push origin master:satellite/master dev:satellite/dev:: +`git push mothership master:satellite/master dev:satellite/dev`:: Use the source ref that matches `master` (e.g. `refs/heads/master`) to update the ref that matches `satellite/master` (most probably - `refs/remotes/satellite/master`) in the `origin` repository, then + `refs/remotes/satellite/master`) in the `mothership` repository; do the same for `dev` and `satellite/dev`. ++ +This is to emulate `git fetch` run on the `mothership` using `git +push` that is run in the opposite direction in order to integrate +the work done on `satellite`, and is often necessary when you can +only make connection in one way (i.e. satellite can ssh into +mothership but mothership cannot initiate connection to satellite +because the latter is behind a firewall or does not run sshd). ++ +After running this `git push` on the `satellite` machine, you would +ssh into the `mothership` and run `git merge` there to complete the +emulation of `git pull` that were run on `mothership` to pull changes +made on `satellite`. -git push origin HEAD:master:: +`git push origin HEAD:master`:: Push the current branch to the remote ref matching `master` in the `origin` repository. This form is convenient to push the current branch without thinking about its local name. -git push origin master:refs/heads/experimental:: +`git push origin master:refs/heads/experimental`:: Create the branch `experimental` in the `origin` repository by copying the current `master` branch. This form is only needed to create a new branch or tag in the remote repository when the local name and the remote name are different; otherwise, the ref name on its own will work. -git push origin :experimental:: +`git push origin :experimental`:: Find a ref that matches `experimental` in the `origin` repository (e.g. `refs/heads/experimental`), and delete it. -git push origin {plus}dev:master:: +`git push origin +dev:master`:: Update the origin repository's master branch with the dev branch, allowing non-fast-forward updates. *This can leave unreferenced commits dangling in the origin repository.* Consider the @@ -380,16 +528,6 @@ Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a `git gc` command on the origin repository. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com>, later rewritten in C -by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite |