diff options
Diffstat (limited to 'Documentation/git-push.txt')
| -rw-r--r-- | Documentation/git-push.txt | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt new file mode 100644 index 0000000000..aede48877f --- /dev/null +++ b/Documentation/git-push.txt @@ -0,0 +1,417 @@ +git-push(1) +=========== + +NAME +---- +git-push - Update remote refs along with associated objects + + +SYNOPSIS +-------- +[verse] +'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] + [--repo=<repository>] [-f | --force] [-v | --verbose] [-u | --set-upstream] + [<repository> [<refspec>...]] + +DESCRIPTION +----------- + +Updates remote refs using local refs, while sending objects +necessary to complete the given refs. + +You can make interesting things happen to a repository +every time you push into it, by setting up 'hooks' there. See +documentation for linkgit:git-receive-pack[1]. + + +OPTIONS[[OPTIONS]] +------------------ +<repository>:: + The "remote" repository that is destination of a push + operation. This parameter can be either a URL + (see the section <<URLS,GIT URLS>> below) or the name + of a remote (see the section <<REMOTES,REMOTES>> below). + +<refspec>...:: + The format of a <refspec> parameter is an optional plus + `{plus}`, followed by the source ref <src>, followed + by a colon `:`, followed by the destination ref <dst>. + It is used to specify with what <src> object the <dst> ref + in the remote repository is to be updated. ++ +The <src> is often the name of the branch you would want to push, but +it can be any arbitrary "SHA-1 expression", such as `master~4` or +`HEAD` (see linkgit:gitrevisions[7]). ++ +The <dst> tells which ref on the remote side is updated with this +push. Arbitrary expressions cannot be used here, an actual ref must +be named. If `:`<dst> is omitted, the same ref as <src> will be +updated. ++ +The object referenced by <src> is used to update the <dst> reference +on the remote side, but by default this is only allowed if the +update can fast-forward <dst>. By having the optional leading `{plus}`, +you can tell git to update the <dst> ref even when the update is not a +fast-forward. This does *not* attempt to merge <src> into <dst>. See +EXAMPLES below for details. ++ +`tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. ++ +Pushing an empty <src> allows you to delete the <dst> ref from +the remote repository. ++ +The special refspec `:` (or `{plus}:` to allow non-fast-forward updates) +directs git to push "matching" branches: for every branch that exists on +the local side, the remote side is updated if a branch of the same name +already exists on the remote side. This is the default operation mode +if no explicit refspec is found (that is neither on the command line +nor in any Push line of the corresponding remotes file---see below). + +--all:: + Instead of naming each ref to push, specifies that all + refs under `refs/heads/` be pushed. + +--mirror:: + Instead of naming each ref to push, specifies that all + refs under `refs/` (which includes but is not + limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`) + be mirrored to the remote repository. Newly created local + refs will be pushed to the remote end, locally updated refs + will be force updated on the remote end, and deleted refs + will be removed from the remote end. This is the default + if the configuration option `remote.<remote>.mirror` is + set. + +-n:: +--dry-run:: + Do everything except actually send the updates. + +--porcelain:: + Produce machine-readable output. The output status line for each ref + will be tab-separated and sent to stdout instead of stderr. The full + symbolic names of the refs will be given. + +--delete:: + All listed refs are deleted from the remote repository. This is + the same as prefixing all refs with a colon. + +--tags:: + All refs under `refs/tags` are pushed, in + addition to refspecs explicitly listed on the command + line. + +--receive-pack=<git-receive-pack>:: +--exec=<git-receive-pack>:: + Path to the 'git-receive-pack' program on the remote + end. Sometimes useful when pushing to a remote + repository over ssh, and you do not have the program in + a directory on the default $PATH. + +-f:: +--force:: + Usually, the command refuses to update a remote ref that is + not an ancestor of the local ref used to overwrite it. + This flag disables the check. This can cause the + remote repository to lose commits; use it with care. + +--repo=<repository>:: + This option is only relevant if no <repository> argument is + passed in the invocation. In this case, 'git push' derives the + remote name from the current branch: If it tracks a remote + branch, then that remote repository is pushed to. Otherwise, + the name "origin" is used. For this latter case, this option + can be used to override the name "origin". In other words, + the difference between these two commands ++ +-------------------------- +git push public #1 +git push --repo=public #2 +-------------------------- ++ +is that #1 always pushes to "public" whereas #2 pushes to "public" +only if the current branch does not track a remote branch. This is +useful if you write an alias or script around 'git push'. + +-u:: +--set-upstream:: + For every branch that is up to date or successfully pushed, add + upstream (tracking) reference, used by argument-less + linkgit:git-pull[1] and other commands. For more information, + see 'branch.<name>.merge' in linkgit:git-config[1]. + +--thin:: +--no-thin:: + These options are passed to linkgit:git-send-pack[1]. A thin transfer + significantly reduces the amount of sent data when the sender and + receiver share many of the same objects in common. The default is + \--thin. + +-q:: +--quiet:: + Suppress all output, including the listing of updated refs, + unless an error occurs. Progress is not reported to the standard + error stream. + +-v:: +--verbose:: + Run verbosely. + +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. + +--recurse-submodules=check:: + Check whether all submodule commits used by the revisions to be + pushed are available on a remote tracking branch. Otherwise the + push will be aborted and the command will exit with non-zero status. + + +include::urls-remotes.txt[] + +OUTPUT +------ + +The output of "git push" depends on the transport method used; this +section describes the output when pushing over the git protocol (either +locally or via ssh). + +The status of the push is output in tabular form, with each line +representing the status of a single ref. Each line is of the form: + +------------------------------- + <flag> <summary> <from> -> <to> (<reason>) +------------------------------- + +If --porcelain is used, then each line of the output is of the form: + +------------------------------- + <flag> \t <from>:<to> \t <summary> (<reason>) +------------------------------- + +The status of up-to-date refs is shown only if --porcelain or --verbose +option is used. + +flag:: + A single character indicating the status of the ref: +(space);; for a successfully pushed fast-forward; +`{plus}`;; for a successful forced update; +`-`;; for a successfully deleted ref; +`*`;; for a successfully pushed new ref; +`!`;; for a ref that was rejected or failed to push; and +`=`;; for a ref that was up to date and did not need pushing. + +summary:: + For a successfully pushed ref, the summary shows the old and new + values of the ref in a form suitable for using as an argument to + `git log` (this is `<old>..<new>` in most cases, and + `<old>\...<new>` for forced non-fast-forward updates). ++ +For a failed update, more details are given: ++ +-- +rejected:: + Git did not try to send the ref at all, typically because it + is not a fast-forward and you did not force the update. + +remote rejected:: + The remote end refused the update. Usually caused by a hook + on the remote side, or because the remote repository has one + of the following safety options in effect: + `receive.denyCurrentBranch` (for pushes to the checked out + branch), `receive.denyNonFastForwards` (for forced + non-fast-forward updates), `receive.denyDeletes` or + `receive.denyDeleteCurrent`. See linkgit:git-config[1]. + +remote failure:: + The remote end did not report the successful update of the ref, + perhaps because of a temporary error on the remote side, a + break in the network connection, or other transient error. +-- + +from:: + The name of the local ref being pushed, minus its + `refs/<type>/` prefix. In the case of deletion, the + name of the local ref is omitted. + +to:: + The name of the remote ref being updated, minus its + `refs/<type>/` prefix. + +reason:: + A human-readable explanation. In the case of successfully pushed + refs, no explanation is needed. For a failed ref, the reason for + failure is described. + +Note about fast-forwards +------------------------ + +When an update changes a branch (or more in general, a ref) that used to +point at commit A to point at another commit B, it is called a +fast-forward update if and only if B is a descendant of A. + +In a fast-forward update from A to B, the set of commits that the original +commit A built on top of is a subset of the commits the new commit B +builds on top of. Hence, it does not lose any history. + +In contrast, a non-fast-forward update will lose history. For example, +suppose you and somebody else started at the same commit X, and you built +a history leading to commit B while the other person built a history +leading to commit A. The history looks like this: + +---------------- + + B + / + ---X---A + +---------------- + +Further suppose that the other person already pushed changes leading to A +back to the original repository you two obtained the original commit X. + +The push done by the other person updated the branch that used to point at +commit X to point at commit A. It is a fast-forward. + +But if you try to push, you will attempt to update the branch (that +now points at A) with commit B. This does _not_ fast-forward. If you did +so, the changes introduced by commit A will be lost, because everybody +will now start building on top of B. + +The command by default does not allow an update that is not a fast-forward +to prevent such loss of history. + +If you do not want to lose your work (history from X to B) nor the work by +the other person (history from X to A), you would need to first fetch the +history from the repository, create a history that contains changes done +by both parties, and push the result back. + +You can perform "git pull", resolve potential conflicts, and "git push" +the result. A "git pull" will create a merge commit C between commits A +and B. + +---------------- + + B---C + / / + ---X---A + +---------------- + +Updating A with the resulting merge commit will fast-forward and your +push will be accepted. + +Alternatively, you can rebase your change between X and B on top of A, +with "git pull --rebase", and push the result back. The rebase will +create a new commit D that builds the change between X and B on top of +A. + +---------------- + + B D + / / + ---X---A + +---------------- + +Again, updating A with this commit will fast-forward and your push will be +accepted. + +There is another common situation where you may encounter non-fast-forward +rejection when you try to push, and it is possible even when you are +pushing into a repository nobody else pushes into. After you push commit +A yourself (in the first picture in this section), replace it with "git +commit --amend" to produce commit B, and you try to push it out, because +forgot that you have pushed A out already. In such a case, and only if +you are certain that nobody in the meantime fetched your earlier commit A +(and started building on top of it), you can run "git push --force" to +overwrite it. In other words, "git push --force" is a method reserved for +a case where you do mean to lose history. + + +Examples +-------- + +`git push`:: + Works like `git push <remote>`, where <remote> is the + current branch's remote (or `origin`, if no remote is + configured for the current branch). + +`git push origin`:: + Without additional configuration, works like + `git push origin :`. ++ +The default behavior of this command when no <refspec> is given can be +configured by setting the `push` option of the remote. ++ +For example, to default to pushing only the current branch to `origin` +use `git config remote.origin.push HEAD`. Any valid <refspec> (like +the ones in the examples below) can be configured as the default for +`git push origin`. + +`git push origin :`:: + Push "matching" branches to `origin`. See + <refspec> in the <<OPTIONS,OPTIONS>> section above for a + description of "matching" branches. + +`git push origin master`:: + Find a ref that matches `master` in the source repository + (most likely, it would find `refs/heads/master`), and update + the same ref (e.g. `refs/heads/master`) in `origin` repository + with it. If `master` did not exist remotely, it would be + created. + +`git push origin HEAD`:: + A handy way to push the current branch to the same name on the + remote. + +`git push origin master:satellite/master dev:satellite/dev`:: + Use the source ref that matches `master` (e.g. `refs/heads/master`) + to update the ref that matches `satellite/master` (most probably + `refs/remotes/satellite/master`) in the `origin` repository, then + do the same for `dev` and `satellite/dev`. + +`git push origin HEAD:master`:: + Push the current branch to the remote ref matching `master` in the + `origin` repository. This form is convenient to push the current + branch without thinking about its local name. + +`git push origin master:refs/heads/experimental`:: + Create the branch `experimental` in the `origin` repository + by copying the current `master` branch. This form is only + needed to create a new branch or tag in the remote repository when + the local name and the remote name are different; otherwise, + the ref name on its own will work. + +`git push origin :experimental`:: + Find a ref that matches `experimental` in the `origin` repository + (e.g. `refs/heads/experimental`), and delete it. + +`git push origin {plus}dev:master`:: + Update the origin repository's master branch with the dev branch, + allowing non-fast-forward updates. *This can leave unreferenced + commits dangling in the origin repository.* Consider the + following situation, where a fast-forward is not possible: ++ +---- + o---o---o---A---B origin/master + \ + X---Y---Z dev +---- ++ +The above command would change the origin repository to ++ +---- + A---B (unnamed branch) + / + o---o---o---X---Y---Z master +---- ++ +Commits A and B would no longer belong to a branch with a symbolic name, +and so would be unreachable. As such, these commits would be removed by +a `git gc` command on the origin repository. + +GIT +--- +Part of the linkgit:git[1] suite |