diff options
Diffstat (limited to 'Documentation/git-pack-objects.txt')
| -rw-r--r-- | Documentation/git-pack-objects.txt | 168 |
1 files changed, 120 insertions, 48 deletions
diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index bd3ee456e3..d2d8f4792a 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -9,9 +9,11 @@ git-pack-objects - Create a packed archive of objects SYNOPSIS -------- [verse] -'git-pack-objects' [-q] [--no-reuse-delta] [--delta-base-offset] [--non-empty] - [--local] [--incremental] [--window=N] [--depth=N] [--all-progress] - [--revs [--unpacked | --all]*] [--stdout | base-name] < object-list +'git pack-objects' [-q | --progress | --all-progress] [--all-progress-implied] + [--no-reuse-delta] [--delta-base-offset] [--non-empty] + [--local] [--incremental] [--window=<n>] [--depth=<n>] + [--revs [--unpacked | --all]] [--stdout | base-name] + [--keep-true-parents] < object-list DESCRIPTION @@ -19,26 +21,28 @@ DESCRIPTION Reads list of objects from the standard input, and writes a packed archive with specified base-name, or to the standard output. -A packed archive is an efficient way to transfer set of objects -between two repositories, and also is an archival format which -is efficient to access. The packed archive format (.pack) is -designed to be unpackable without having anything else, but for -random access, accompanied with the pack index file (.idx). +A packed archive is an efficient way to transfer a set of objects +between two repositories as well as an access efficient archival +format. In a packed archive, an object is either stored as a +compressed whole or as a difference from some other object. +The latter is often called a delta. -'git-unpack-objects' command can read the packed archive and +The packed archive format (.pack) is designed to be self-contained +so that it can be unpacked without any further information. Therefore, +each object that a delta depends upon must be present within the pack. + +A pack index file (.idx) is generated for fast, random access to the +objects in the pack. Placing both the index file (.idx) and the packed +archive (.pack) in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or +any of the directories on $GIT_ALTERNATE_OBJECT_DIRECTORIES) +enables Git to read from the pack archive. + +The 'git unpack-objects' command can read the packed archive and expand the objects contained in the pack into "one-file one-object" format; this is typically done by the smart-pull commands when a pack is created on-the-fly for efficient network transport by their peers. -Placing both in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or -any of the directories on $GIT_ALTERNATE_OBJECT_DIRECTORIES) -enables git to read from such an archive. - -In a packed archive, an object is either stored as a compressed -whole, or as a difference from some other object. The latter is -often called a delta. - OPTIONS ------- @@ -46,9 +50,8 @@ base-name:: Write into a pair of files (.pack and .idx), using <base-name> to determine the name of the created file. When this option is used, the two files are written in - <base-name>-<SHA1>.{pack,idx} files. <SHA1> is a hash - of the sorted object names to make the resulting filename - based on the pack content, and written to the standard + <base-name>-<SHA-1>.{pack,idx} files. <SHA-1> is a hash + based on the pack content and is written to the standard output of the command. --stdout:: @@ -58,9 +61,11 @@ base-name:: --revs:: Read the revision arguments from the standard input, instead of individual object names. The revision arguments are processed - the same way as gitlink:git-rev-list[1] with `--objects` flag + the same way as 'git rev-list' with the `--objects` flag uses its `commit` arguments to build the list of objects it outputs. The objects on the resulting list are packed. + Besides revisions, `--not` or `--shallow <SHA-1>` lines are + also accepted. --unpacked:: This implies `--revs`. When processing the list of @@ -70,10 +75,16 @@ base-name:: --all:: This implies `--revs`. In addition to the list of revision arguments read from the standard input, pretend - as if all refs under `$GIT_DIR/refs` are specified to be + as if all refs under `refs/` are specified to be included. ---window=[N], --depth=[N]:: +--include-tag:: + Include unasked-for annotated tags if the object they + reference was included in the resulting packfile. This + can be useful to send new tags to native Git clients. + +--window=<n>:: +--depth=<n>:: These two options affect how the objects contained in the pack are stored using delta compression. The objects are first internally sorted by type, size and @@ -85,15 +96,37 @@ base-name:: times to get to the necessary object. The default value for --window is 10 and --depth is 50. +--window-memory=<n>:: + This option provides an additional limit on top of `--window`; + the window size will dynamically scale down so as to not take + up more than '<n>' bytes in memory. This is useful in + repositories with a mix of large and small objects to not run + out of memory with a large window, but still be able to take + advantage of the large window for the smaller objects. The + size can be suffixed with "k", "m", or "g". + `--window-memory=0` makes memory usage unlimited, which is the + default. + +--max-pack-size=<n>:: + Maximum size of each output pack file. The size can be suffixed with + "k", "m", or "g". The minimum size allowed is limited to 1 MiB. + If specified, multiple packfiles may be created. + The default is unlimited, unless the config variable + `pack.packSizeLimit` is set. + +--honor-pack-keep:: + This flag causes an object already in a local pack that + has a .keep file to be ignored, even if it would have + otherwise been packed. + --incremental:: - This flag causes an object already in a pack ignored - even if it appears in the standard input. + This flag causes an object already in a pack to be ignored + even if it would have otherwise been packed. --local:: - This flag is similar to `--incremental`; instead of - ignoring all packed objects, it only ignores objects - that are packed and not in the local object store - (i.e. borrowed from an alternate). + This flag causes an object that is borrowed from an alternate + object store to be ignored even if it would have otherwise been + packed. --non-empty:: Only create a packed archive if it would contain at @@ -107,7 +140,7 @@ base-name:: --all-progress:: When --stdout is specified then progress report is - displayed during the object count and deltification phases + displayed during the object count and compression phases but inhibited during the write-out phase. The reason is that in some cases the output stream is directly linked to another command which may wish to display progress @@ -116,6 +149,11 @@ base-name:: report for the write-out phase as well even if --stdout is used. +--all-progress-implied:: + This is used to imply --all-progress whenever progress display + is activated. Unlike --all-progress this flag doesn't actually + force any progress display by itself. + -q:: This flag makes the command not to report its progress on the standard error stream. @@ -127,38 +165,72 @@ base-name:: This flag tells the command not to reuse existing deltas but compute them from scratch. +--no-reuse-object:: + This flag tells the command not to reuse existing object data at all, + including non deltified object, forcing recompression of everything. + This implies --no-reuse-delta. Useful only in the obscure case where + wholesale enforcement of a different compression level on the + packed data is desired. + +--compression=<n>:: + Specifies compression level for newly-compressed data in the + generated pack. If not specified, pack compression level is + determined first by pack.compression, then by core.compression, + and defaults to -1, the zlib default, if neither is set. + Add --no-reuse-object if you want to force a uniform compression + level on all data no matter the source. + +--thin:: + Create a "thin" pack by omitting the common objects between a + sender and a receiver in order to reduce network transfer. This + option only makes sense in conjunction with --stdout. ++ +Note: A thin pack violates the packed archive format by omitting +required objects and is thus unusable by Git without making it +self-contained. Use `git index-pack --fix-thin` +(see linkgit:git-index-pack[1]) to restore the self-contained property. + --delta-base-offset:: - A packed archive can express base object of a delta as - either 20-byte object name or as an offset in the - stream, but older version of git does not understand the - latter. By default, git-pack-objects only uses the + A packed archive can express the base object of a delta as + either a 20-byte object name or as an offset in the + stream, but ancient versions of Git don't understand the + latter. By default, 'git pack-objects' only uses the former format for better compatibility. This option allows the command to use the latter format for compactness. Depending on the average delta chain length, this option typically shrinks the resulting packfile by 3-5 per-cent. ++ +Note: Porcelain commands such as `git gc` (see linkgit:git-gc[1]), +`git repack` (see linkgit:git-repack[1]) pass this option by default +in modern Git when they put objects in your repository into pack files. +So does `git bundle` (see linkgit:git-bundle[1]) when it creates a bundle. + +--threads=<n>:: + Specifies the number of threads to spawn when searching for best + delta matches. This requires that pack-objects be compiled with + pthreads otherwise this option is ignored with a warning. + This is meant to reduce packing time on multiprocessor machines. + The required amount of memory for the delta search window is + however multiplied by the number of threads. + Specifying 0 will cause Git to auto-detect the number of CPU's + and set the number of threads accordingly. --index-version=<version>[,<offset>]:: This is intended to be used by the test suite only. It allows to force the version for the generated pack index, and to force 64-bit index entries on objects located above the given offset. +--keep-true-parents:: + With this option, parents that are hidden by grafts are packed + nevertheless. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano - -See Also +SEE ALSO -------- -gitlink:git-rev-list[1] -gitlink:git-repack[1] -gitlink:git-prune-packed[1] +linkgit:git-rev-list[1] +linkgit:git-repack[1] +linkgit:git-prune-packed[1] GIT --- -Part of the gitlink:git[7] suite - +Part of the linkgit:git[1] suite |