diff options
Diffstat (limited to 'Documentation/git-interpret-trailers.txt')
| -rw-r--r-- | Documentation/git-interpret-trailers.txt | 169 |
1 files changed, 141 insertions, 28 deletions
diff --git a/Documentation/git-interpret-trailers.txt b/Documentation/git-interpret-trailers.txt index 31cdeaecdf..956a01d184 100644 --- a/Documentation/git-interpret-trailers.txt +++ b/Documentation/git-interpret-trailers.txt @@ -3,24 +3,27 @@ git-interpret-trailers(1) NAME ---- -git-interpret-trailers - help add structured information into commit messages +git-interpret-trailers - Add or parse structured information in commit messages SYNOPSIS -------- [verse] -'git interpret-trailers' [--in-place] [--trim-empty] [(--trailer <token>[(=|:)<value>])...] [<file>...] +'git interpret-trailers' [<options>] [(--trailer <token>[(=|:)<value>])...] [<file>...] +'git interpret-trailers' [<options>] [--parse] [<file>...] DESCRIPTION ----------- -Help adding 'trailers' lines, that look similar to RFC 822 e-mail +Help parsing or adding 'trailers' lines, that look similar to RFC 822 e-mail headers, at the end of the otherwise free-form part of a commit message. This command reads some patches or commit messages from either the -<file> arguments or the standard input if no <file> is specified. Then -this command applies the arguments passed using the `--trailer` -option, if any, to the commit message part of each input file. The -result is emitted on the standard output. +<file> arguments or the standard input if no <file> is specified. If +`--parse` is specified, the output consists of the parsed trailers. + +Otherwise, this command applies the arguments passed using the +`--trailer` option, if any, to the commit message part of each input +file. The result is emitted on the standard output. Some configuration variables control the way the `--trailer` arguments are applied to each commit message and the way any existing trailer in @@ -48,13 +51,14 @@ with only spaces at the end of the commit message part, one blank line will be added before the new trailer. Existing trailers are extracted from the input message by looking for -a group of one or more lines that (i) are all trailers, or (ii) contains at +a group of one or more lines that (i) is all trailers, or (ii) contains at least one Git-generated or user-configured trailer and consists of at least 25% trailers. The group must be preceded by one or more empty (or whitespace-only) lines. The group must either be at the end of the message or be the last -non-whitespace lines before a line that starts with '---'. Such three -minus signs start the patch part of the message. +non-whitespace lines before a line that starts with '---' (followed by a +space or the end of the line). Such three minus signs start the patch +part of the message. See also `--no-divider` below. When reading trailers, there can be whitespaces after the token, the separator and the value. There can also be whitespaces @@ -80,6 +84,53 @@ OPTIONS trailer to the input messages. See the description of this command. +--where <placement>:: +--no-where:: + Specify where all new trailers will be added. A setting + provided with '--where' overrides all configuration variables + and applies to all '--trailer' options until the next occurrence of + '--where' or '--no-where'. Possible values are `after`, `before`, + `end` or `start`. + +--if-exists <action>:: +--no-if-exists:: + Specify what action will be performed when there is already at + least one trailer with the same <token> in the message. A setting + provided with '--if-exists' overrides all configuration variables + and applies to all '--trailer' options until the next occurrence of + '--if-exists' or '--no-if-exists'. Possible actions are `addIfDifferent`, + `addIfDifferentNeighbor`, `add`, `replace` and `doNothing`. + +--if-missing <action>:: +--no-if-missing:: + Specify what action will be performed when there is no other + trailer with the same <token> in the message. A setting + provided with '--if-missing' overrides all configuration variables + and applies to all '--trailer' options until the next occurrence of + '--if-missing' or '--no-if-missing'. Possible actions are `doNothing` + or `add`. + +--only-trailers:: + Output only the trailers, not any other parts of the input. + +--only-input:: + Output only trailers that exist in the input; do not add any + from the command-line or by following configured `trailer.*` + rules. + +--unfold:: + Remove any whitespace-continuation in trailers, so that each + trailer appears on a line by itself with its full content. + +--parse:: + A convenience alias for `--only-trailers --only-input + --unfold`. + +--no-divider:: + Do not treat `---` as the end of the commit message. Use this + when you know your input contains just the commit message itself + (and not an email or the output of `git format-patch`). + CONFIGURATION VARIABLES ----------------------- @@ -170,8 +221,8 @@ trailer.<token>.where:: configuration variable and it overrides what is specified by that option for trailers with the specified <token>. -trailer.<token>.ifexist:: - This option takes the same values as the 'trailer.ifexist' +trailer.<token>.ifexists:: + This option takes the same values as the 'trailer.ifexists' configuration variable and it overrides what is specified by that option for trailers with the specified <token>. @@ -181,25 +232,38 @@ trailer.<token>.ifmissing:: that option for trailers with the specified <token>. trailer.<token>.command:: - This option can be used to specify a shell command that will - be called to automatically add or modify a trailer with the - specified <token>. + This option behaves in the same way as 'trailer.<token>.cmd', except + that it doesn't pass anything as argument to the specified command. + Instead the first occurrence of substring $ARG is replaced by the + value that would be passed as argument. + -When this option is specified, the behavior is as if a special -'<token>=<value>' argument were added at the beginning of the command -line, where <value> is taken to be the standard output of the -specified command with any leading and trailing whitespace trimmed -off. +The 'trailer.<token>.command' option has been deprecated in favor of +'trailer.<token>.cmd' due to the fact that $ARG in the user's command is +only replaced once and that the original way of replacing $ARG is not safe. + -If the command contains the `$ARG` string, this string will be -replaced with the <value> part of an existing trailer with the same -<token>, if any, before the command is launched. +When both 'trailer.<token>.cmd' and 'trailer.<token>.command' are given +for the same <token>, 'trailer.<token>.cmd' is used and +'trailer.<token>.command' is ignored. + +trailer.<token>.cmd:: + This option can be used to specify a shell command that will be called: + once to automatically add a trailer with the specified <token>, and then + each time a '--trailer <token>=<value>' argument to modify the <value> of + the trailer that this option would produce. + -If some '<token>=<value>' arguments are also passed on the command -line, when a 'trailer.<token>.command' is configured, the command will -also be executed for each of these arguments. And the <value> part of -these arguments, if any, will be used to replace the `$ARG` string in -the command. +When the specified command is first called to add a trailer +with the specified <token>, the behavior is as if a special +'--trailer <token>=<value>' argument was added at the beginning +of the "git interpret-trailers" command, where <value> +is taken to be the standard output of the command with any +leading and trailing whitespace trimmed off. ++ +If some '--trailer <token>=<value>' arguments are also passed +on the command line, the command is called again once for each +of these arguments with the same <token>. And the <value> part +of these arguments, if any, will be passed to the command as its +first argument. This way the command can produce a <value> computed +from the <value> passed in the '--trailer <token>=<value>' argument. EXAMPLES -------- @@ -282,6 +346,55 @@ subject Fix #42 ------------ +* Configure a 'help' trailer with a cmd use a script `glog-find-author` + which search specified author identity from git log in git repository + and show how it works: ++ +------------ +$ cat ~/bin/glog-find-author +#!/bin/sh +test -n "$1" && git log --author="$1" --pretty="%an <%ae>" -1 || true +$ git config trailer.help.key "Helped-by: " +$ git config trailer.help.ifExists "addIfDifferentNeighbor" +$ git config trailer.help.cmd "~/bin/glog-find-author" +$ git interpret-trailers --trailer="help:Junio" --trailer="help:Couder" <<EOF +> subject +> +> message +> +> EOF +subject + +message + +Helped-by: Junio C Hamano <gitster@pobox.com> +Helped-by: Christian Couder <christian.couder@gmail.com> +------------ + +* Configure a 'ref' trailer with a cmd use a script `glog-grep` + to grep last relevant commit from git log in the git repository + and show how it works: ++ +------------ +$ cat ~/bin/glog-grep +#!/bin/sh +test -n "$1" && git log --grep "$1" --pretty=reference -1 || true +$ git config trailer.ref.key "Reference-to: " +$ git config trailer.ref.ifExists "replace" +$ git config trailer.ref.cmd "~/bin/glog-grep" +$ git interpret-trailers --trailer="ref:Add copyright notices." <<EOF +> subject +> +> message +> +> EOF +subject + +message + +Reference-to: 8bc9a0c769 (Add copyright notices., 2005-04-07) +------------ + * Configure a 'see' trailer with a command to show the subject of a commit that is related, and show how it works: + |