diff options
Diffstat (limited to 'Documentation/git-fast-import.txt')
| -rw-r--r-- | Documentation/git-fast-import.txt | 171 |
1 files changed, 143 insertions, 28 deletions
diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index c2f483a8d2..19082b04eb 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -15,7 +15,7 @@ DESCRIPTION This program is usually not what the end user wants to run directly. Most end users want to use one of the existing frontend programs, which parses a specific type of foreign source and feeds the contents -stored there to 'git-fast-import'. +stored there to 'git fast-import'. fast-import reads a mixed command/data stream from standard input and writes one or more packfiles directly into the current repository. @@ -24,7 +24,7 @@ updated branch and tag refs, fully updating the current repository with the newly imported data. The fast-import backend itself can import into an empty repository (one that -has already been initialized by 'git-init') or incrementally +has already been initialized by 'git init') or incrementally update an existing populated repository. Whether or not incremental imports are supported from a particular foreign source depends on the frontend program in use. @@ -44,11 +44,14 @@ OPTIONS not contain the old commit). --max-pack-size=<n>:: - Maximum size of each output packfile, expressed in MiB. - The default is 4096 (4 GiB) as that is the maximum allowed - packfile size (due to file format limitations). Some - importers may wish to lower this, such as to ensure the - resulting packfiles fit on CDs. + Maximum size of each output packfile. + The default is unlimited. + +--big-file-threshold=<n>:: + Maximum size of a blob that fast-import will attempt to + create a delta for, expressed in bytes. The default is 512m + (512 MiB). Some importers may wish to lower this on systems + with constrained memory. --depth=<n>:: Maximum delta depth, for blob and tree deltification. @@ -75,6 +78,20 @@ OPTIONS set of marks. If a mark is defined to different values, the last file wins. +--relative-marks:: + After specifying --relative-marks= the paths specified + with --import-marks= and --export-marks= are relative + to an internal directory in the current repository. + In git-fast-import this means that the paths are relative + to the .git/info/fast-import directory. However, other + importers may use a different location. + +--no-relative-marks:: + Negates a previous --relative-marks. Allows for combining + relative and non-relative marks by interweaving + --(no-)-relative-marks= with the --(import|export)-marks= + options. + --export-pack-edges=<file>:: After creating a packfile, print a line of data to <file> listing the filename of the packfile and the last @@ -82,7 +99,7 @@ OPTIONS This information may be useful after importing projects whose total object set exceeds the 4 GiB packfile limit, as these commits can be used as edge points during calls - to 'git-pack-objects'. + to 'git pack-objects'. --quiet:: Disable all non-fatal output, making fast-import silent when it @@ -124,9 +141,9 @@ an ideal situation, given that most conversion tools are throw-away Parallel Operation ------------------ -Like 'git-push' or 'git-fetch', imports handled by fast-import are safe to +Like 'git push' or 'git fetch', imports handled by fast-import are safe to run alongside parallel `git repack -a -d` or `git gc` invocations, -or any other Git operation (including 'git-prune', as loose objects +or any other Git operation (including 'git prune', as loose objects are never used by fast-import). fast-import does not lock the branch or tag refs it is actively importing. @@ -138,7 +155,7 @@ fast-forward update, fast-import will skip updating that ref and instead prints a warning message. fast-import will always attempt to update all branch refs, and does not stop on the first failure. -Branch updates can be forced with \--force, but its recommended that +Branch updates can be forced with \--force, but it's recommended that this only be used on an otherwise quiet repository. Using \--force is not necessary for an initial import into an empty repository. @@ -220,7 +237,7 @@ variation in formatting will cause fast-import to reject the value. + An example value is ``Tue Feb 6 11:22:18 2007 -0500''. The Git parser is accurate, but a little on the lenient side. It is the -same parser used by 'git-am' when applying patches +same parser used by 'git am' when applying patches received from email. + Some malformed strings may be accepted as valid dates. In some of @@ -253,10 +270,10 @@ is always copied into the identity string at the time it is being created by fast-import. There is no way to specify a different time or timezone. + -This particular format is supplied as its short to implement and +This particular format is supplied as it's short to implement and may be useful to a process that wants to create a new commit right now, without needing to use a working directory or -'git-update-index'. +'git update-index'. + If separate `author` and `committer` commands are used in a `commit` the timestamps may not match, as the system clock will be polled @@ -303,6 +320,15 @@ and control the current import process. More detailed discussion standard output. This command is optional and is not needed to perform an import. +`feature`:: + Require that fast-import supports the specified feature, or + abort if it does not. + +`option`:: + Specify any of the options listed under OPTIONS that do not + change stream semantic to suit the frontend's needs. This + command is optional and is not needed to perform an import. + `commit` ~~~~~~~~ Create or update a branch with a new commit, recording one logical @@ -311,12 +337,12 @@ change to the project. .... 'commit' SP <ref> LF mark? - ('author' SP <name> SP LT <email> GT SP <when> LF)? - 'committer' SP <name> SP LT <email> GT SP <when> LF + ('author' (SP <name>)? SP LT <email> GT SP <when> LF)? + 'committer' (SP <name>)? SP LT <email> GT SP <when> LF data ('from' SP <committish> LF)? ('merge' SP <committish> LF)? - (filemodify | filedelete | filecopy | filerename | filedeleteall)* + (filemodify | filedelete | filecopy | filerename | filedeleteall | notemodify)* LF? .... @@ -339,14 +365,13 @@ commit message use a 0 length data. Commit messages are free-form and are not interpreted by Git. Currently they must be encoded in UTF-8, as fast-import does not permit other encodings to be specified. -Zero or more `filemodify`, `filedelete`, `filecopy`, `filerename` -and `filedeleteall` commands +Zero or more `filemodify`, `filedelete`, `filecopy`, `filerename`, +`filedeleteall` and `notemodify` commands may be included to update the contents of the branch prior to creating the commit. These commands may be supplied in any order. However it is recommended that a `filedeleteall` command precede -all `filemodify`, `filecopy` and `filerename` commands in the same -commit, as `filedeleteall` -wipes the branch clean (see below). +all `filemodify`, `filecopy`, `filerename` and `notemodify` commands in +the same commit, as `filedeleteall` wipes the branch clean (see below). The `LF` after the command is optional (it used to be required). @@ -398,7 +423,7 @@ quoting or escaping syntax is supported within `<committish>`. Here `<committish>` is any of the following: * The name of an existing branch already in fast-import's internal branch - table. If fast-import doesn't know the name, its treated as a SHA-1 + table. If fast-import doesn't know the name, it's treated as a SHA-1 expression. * A mark reference, `:<idnum>`, where `<idnum>` is the mark number. @@ -595,6 +620,40 @@ more memory per active branch (less than 1 MiB for even most large projects); so frontends that can easily obtain only the affected paths for a commit are encouraged to do so. +`notemodify` +^^^^^^^^^^^^ +Included in a `commit` command to add a new note (annotating a given +commit) or change the content of an existing note. This command has +two different means of specifying the content of the note. + +External data format:: + The data content for the note was already supplied by a prior + `blob` command. The frontend just needs to connect it to the + commit that is to be annotated. ++ +.... + 'N' SP <dataref> SP <committish> LF +.... ++ +Here `<dataref>` can be either a mark reference (`:<idnum>`) +set by a prior `blob` command, or a full 40-byte SHA-1 of an +existing Git blob object. + +Inline data format:: + The data content for the note has not been supplied yet. + The frontend wants to supply it as part of this modify + command. ++ +.... + 'N' SP 'inline' SP <committish> LF + data +.... ++ +See below for a detailed description of the `data` command. + +In both formats `<committish>` is any of the commit specification +expressions also accepted by `from` (see above). + `mark` ~~~~~~ Arranges for fast-import to save a reference to the current object, allowing @@ -624,7 +683,7 @@ lightweight (non-annotated) tags see the `reset` command below. .... 'tag' SP <name> LF 'from' SP <committish> LF - 'tagger' SP <name> SP LT <email> GT SP <when> LF + 'tagger' (SP <name>)? SP LT <email> GT SP <when> LF data .... @@ -657,7 +716,7 @@ recommended, as the frontend does not (easily) have access to the complete set of bytes which normally goes into such a signature. If signing is required, create lightweight tags from within fast-import with `reset`, then create the annotated versions of those tags offline -with the standard 'git-tag' process. +with the standard 'git tag' process. `reset` ~~~~~~~ @@ -703,7 +762,7 @@ assigned mark. The mark command is optional here as some frontends have chosen to generate the Git SHA-1 for the blob on their own, and feed that -directly to `commit`. This is typically more work than its worth +directly to `commit`. This is typically more work than it's worth however, as marks are inexpensive to store and easy to use. `data` @@ -813,6 +872,62 @@ Placing a `progress` command immediately after a `checkpoint` will inform the reader when the `checkpoint` has been completed and it can safely access the refs that fast-import updated. +`feature` +~~~~~~~~~ +Require that fast-import supports the specified feature, or abort if +it does not. + +.... + 'feature' SP <feature> LF +.... + +The <feature> part of the command may be any string matching +^[a-zA-Z][a-zA-Z-]*$ and should be understood by fast-import. + +Feature work identical as their option counterparts with the +exception of the import-marks feature, see below. + +The following features are currently supported: + +* date-format +* import-marks +* export-marks +* relative-marks +* no-relative-marks +* force + +The import-marks behaves differently from when it is specified as +commandline option in that only one "feature import-marks" is allowed +per stream. Also, any --import-marks= specified on the commandline +will override those from the stream (if any). + +`option` +~~~~~~~~ +Processes the specified option so that git fast-import behaves in a +way that suits the frontend's needs. +Note that options specified by the frontend are overridden by any +options the user may specify to git fast-import itself. + +.... + 'option' SP <option> LF +.... + +The `<option>` part of the command may contain any of the options +listed in the OPTIONS section that do not change import semantics, +without the leading '--' and is treated in the same way. + +Option commands must be the first commands on the input (not counting +feature commands), to give an option command after any non-option +command is an error. + +The following commandline options change import semantics and may therefore +not be passed as option: + +* date-format +* import-marks +* export-marks +* force + Crash Reports ------------- If fast-import is supplied invalid input it will terminate with a @@ -958,7 +1073,7 @@ is not `refs/heads/TAG_FIXUP`). When committing fixups, consider using `merge` to connect the commit(s) which are supplying file revisions to the fixup branch. -Doing so will allow tools such as 'git-blame' to track +Doing so will allow tools such as 'git blame' to track through the real commit history and properly annotate the source files. @@ -987,7 +1102,7 @@ Repacking Historical Data ~~~~~~~~~~~~~~~~~~~~~~~~~ If you are repacking very old imported data (e.g. older than the last year), consider expending some extra CPU time and supplying -\--window=50 (or higher) when you run 'git-repack'. +\--window=50 (or higher) when you run 'git repack'. This will take longer, but will also produce a smaller packfile. You only need to expend the effort once, and everyone using your project will benefit from the smaller repository. |