diff options
Diffstat (limited to 'Documentation/git-cvsserver.txt')
| -rw-r--r-- | Documentation/git-cvsserver.txt | 202 |
1 files changed, 138 insertions, 64 deletions
diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 258a62f7e9..88d814af0e 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -11,7 +11,7 @@ SYNOPSIS SSH: [verse] -export CVS_SERVER=git-cvsserver +export CVS_SERVER="git cvsserver" 'cvs' -d :ext:user@server/path/repo.git co <HEAD_name> pserver (/etc/inetd.conf): @@ -28,7 +28,7 @@ OPTIONS ------- All these options obviously only make sense if enforced by the server side. -They have been implemented to resemble the gitlink:git-daemon[1] options as +They have been implemented to resemble the linkgit:git-daemon[1] options as closely as possible. --base-path <path>:: @@ -41,10 +41,13 @@ Don't allow recursing into subdirectories Don't check for `gitcvs.enabled` in config. You also have to specify a list of allowed directories (see below) if you want to use this option. ---version, -V:: +-V:: +--version:: Print version information and exit ---help, -h, -H:: +-h:: +-H:: +--help:: Print usage information and exit <directory>:: @@ -69,19 +72,16 @@ plugin. Most functionality works fine with both of these clients. LIMITATIONS ----------- -Currently cvsserver works over SSH connections for read/write clients, and -over pserver for anonymous CVS access. - CVS clients cannot tag, branch or perform GIT merges. -git-cvsserver maps GIT branches to CVS modules. This is very different +'git-cvsserver' maps GIT branches to CVS modules. This is very different from what most CVS users would expect since in CVS modules usually represent one or more directories. INSTALLATION ------------ -1. If you are going to offer anonymous CVS access via pserver, add a line in +1. If you are going to offer CVS access via pserver, add a line in /etc/inetd.conf like + -- @@ -98,19 +98,53 @@ looks like cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver ------ + +Only anonymous access is provided by pserve by default. To commit you +will have to create pserver accounts, simply add a gitcvs.authdb +setting in the config file of the repositories you want the cvsserver +to allow writes to, for example: + +------ + + [gitcvs] + authdb = /etc/cvsserver/passwd + +------ +The format of these files is username followed by the crypted password, +for example: + +------ + myuser:$1Oyx5r9mdGZ2 + myuser:$1$BA)@$vbnMJMDym7tA32AamXrm./ +------ +You can use the 'htpasswd' facility that comes with Apache to make these +files, but Apache's MD5 crypt method differs from the one used by most C +library's crypt() function, so don't use the -m option. + +Alternatively you can produce the password with perl's crypt() operator: +----- + perl -e 'my ($user, $pass) = @ARGV; printf "%s:%s\n", $user, crypt($user, $pass)' $USER password +----- + +Then provide your password via the pserver method, for example: +------ + cvs -d:pserver:someuser:somepassword <at> server/path/repo.git co <HEAD_name> +------ No special setup is needed for SSH access, other than having GIT tools in the PATH. If you have clients that do not accept the CVS_SERVER -environment variable, you can rename git-cvsserver to cvs. +environment variable, you can rename 'git-cvsserver' to `cvs`. Note: Newer CVS versions (>= 1.12.11) also support specifying CVS_SERVER directly in CVSROOT like ------ -cvs -d ":ext;CVS_SERVER=git-cvsserver:user@server/path/repo.git" co <HEAD_name> +cvs -d ":ext;CVS_SERVER=git cvsserver:user@server/path/repo.git" co <HEAD_name> ------ This has the advantage that it will be saved in your 'CVS/Root' files and you don't need to worry about always setting the correct environment -variable. +variable. SSH users restricted to 'git-shell' don't need to override the default +with CVS_SERVER (and shouldn't) as 'git-shell' understands `cvs` to mean +'git-cvsserver' and pretends that the other end runs the real 'cvs' better. -- 2. For each repo that you want accessible from CVS you need to edit config in the repo and add the following section. @@ -123,11 +157,14 @@ variable. logfile=/path/to/logfile ------ -Note: you need to ensure each user that is going to invoke git-cvsserver has +Note: you need to ensure each user that is going to invoke 'git-cvsserver' has write access to the log file and to the database (see <<dbbackend,Database Backend>>. If you want to offer write access over SSH, the users of course also need write access to the git repository itself. +You also need to ensure that each repository is "bare" (without a git index +file) for `cvs commit` to work. See linkgit:gitcvs-migration[7]. + [[configaccessmethod]] All configuration variables can also be overridden for a specific method of access. Valid method names are "ext" (for SSH access) and "pserver". The @@ -141,25 +178,29 @@ allowing access over SSH. enabled=1 ------ -- -3. On the client machine you need to set the following variables. - CVSROOT should be set as per normal, but the directory should point at the - appropriate git repo. For example: +3. If you didn't specify the CVSROOT/CVS_SERVER directly in the checkout command, + automatically saving it in your 'CVS/Root' files, then you need to set them + explicitly in your environment. CVSROOT should be set as per normal, but the + directory should point at the appropriate git repo. As above, for SSH clients + _not_ restricted to 'git-shell', CVS_SERVER should be set to 'git-cvsserver'. + -- -For SSH access, CVS_SERVER should be set to git-cvsserver - -Example: - ------ export CVSROOT=:ext:user@server:/var/git/project.git - export CVS_SERVER=git-cvsserver + export CVS_SERVER="git cvsserver" ------ -- -4. For SSH clients that will make commits, make sure their .bashrc file - sets the GIT_AUTHOR and GIT_COMMITTER variables. +4. For SSH clients that will make commits, make sure their server-side + .ssh/environment files (or .bashrc, etc., according to their specific shell) + export appropriate values for GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, + GIT_COMMITTER_NAME, and GIT_COMMITTER_EMAIL. For SSH clients whose login + shell is bash, .bashrc may be a reasonable alternative. 5. Clients should now be able to check out the project. Use the CVS 'module' - name to indicate what GIT 'head' you want to check out. Example: + name to indicate what GIT 'head' you want to check out. This also sets the + name of your newly checked-out directory, unless you tell it otherwise with + `-d <dir_name>`. For example, this checks out 'master' branch to the + `project-master` directory: + ------ cvs co -d project-master master @@ -169,42 +210,53 @@ Example: Database Backend ---------------- -git-cvsserver uses one database per git head (i.e. CVS module) to -store information about the repository for faster access. The -database doesn't contain any persistent data and can be completely -regenerated from the git repository at any time. The database -needs to be updated (i.e. written to) after every commit. +'git-cvsserver' uses one database per git head (i.e. CVS module) to +store information about the repository to maintain consistent +CVS revision numbers. The database needs to be +updated (i.e. written to) after every commit. -If the commit is done directly by using git (as opposed to -using git-cvsserver) the update will need to happen on the -next repository access by git-cvsserver, independent of +If the commit is done directly by using `git` (as opposed to +using 'git-cvsserver') the update will need to happen on the +next repository access by 'git-cvsserver', independent of access method and requested operation. That means that even if you offer only read access (e.g. by using -the pserver method), git-cvsserver should have write access to +the pserver method), 'git-cvsserver' should have write access to the database to work reliably (otherwise you need to make sure -that the database if up-to-date all the time git-cvsserver is run). +that the database is up-to-date any time 'git-cvsserver' is executed). By default it uses SQLite databases in the git directory, named `gitcvs.<module_name>.sqlite`. Note that the SQLite backend creates temporary files in the same directory as the database file on write so it might not be enough to grant the users using -git-cvsserver write access to the database file without granting +'git-cvsserver' write access to the database file without granting them write access to the directory, too. +The database can not be reliably regenerated in a +consistent form after the branch it is tracking has changed. +Example: For merged branches, 'git-cvsserver' only tracks +one branch of development, and after a 'git merge' an +incrementally updated database may track a different branch +than a database regenerated from scratch, causing inconsistent +CVS revision numbers. `git-cvsserver` has no way of knowing which +branch it would have picked if it had been run incrementally +pre-merge. So if you have to fully or partially (from old +backup) regenerate the database, you should be suspicious +of pre-existing CVS sandboxes. + You can configure the database backend with the following configuration variables: Configuring database backend ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -git-cvsserver uses the Perl DBI module. Please also read +'git-cvsserver' uses the Perl DBI module. Please also read its documentation if changing these variables, especially about `DBI->connect()`. gitcvs.dbname:: Database name. The exact meaning depends on the - used database driver, for SQLite this is a filename. + selected database driver, for SQLite this is a filename. Supports variable substitution (see below). May not contain semicolons (`;`). Default: '%Ggitcvs.%m.sqlite' @@ -215,7 +267,7 @@ gitcvs.dbdriver:: with 'DBD::SQLite', reported to work with 'DBD::Pg', and reported *not* to work with 'DBD::mysql'. Please regard this as an experimental feature. May not - contain double colons (`:`). + contain colons (`:`). Default: 'SQLite' gitcvs.dbuser:: @@ -227,6 +279,11 @@ gitcvs.dbpass:: Database password. Only useful if setting `dbdriver`, since SQLite has no concept of database passwords. +gitcvs.dbTableNamePrefix:: + Database table name prefix. Supports variable substitution + (see below). Any non-alphabetic characters will be replaced + with underscores. + All variables can also be set per access method, see <<configaccessmethod,above>>. Variable substitution @@ -245,10 +302,25 @@ In `dbdriver` and `dbuser` you can use the following variables: %a:: access method (one of "ext" or "pserver") %u:: - Name of the user running git-cvsserver. + Name of the user running 'git-cvsserver'. If no name can be determined, the numeric uid is used. +ENVIRONMENT +----------- + +These variables obviate the need for command-line options in some +circumstances, allowing easier restricted usage through git-shell. + +GIT_CVSSERVER_BASE_PATH takes the place of the argument to --base-path. + +GIT_CVSSERVER_ROOT specifies a single-directory whitelist. The +repository must still be configured to allow access through +git-cvsserver, as described above. + +When these environment variables are set, the corresponding +command-line arguments may not be used. + Eclipse CVS Client Notes ------------------------ @@ -266,13 +338,13 @@ To get a checkout with the Eclipse CVS client: Protocol notes: If you are using anonymous access via pserver, just select that. Those using SSH access should choose the 'ext' protocol, and configure 'ext' access on the Preferences->Team->CVS->ExtConnection pane. Set CVS_SERVER to -'git-cvsserver'. Note that password support is not good when using 'ext', +"`git cvsserver`". Note that password support is not good when using 'ext', you will definitely want to have SSH keys setup. Alternatively, you can just use the non-standard extssh protocol that Eclipse offer. In that case CVS_SERVER is ignored, and you will have to replace -the cvs utility on the server with git-cvsserver or manipulate your `.bashrc` -so that calling 'cvs' effectively calls git-cvsserver. +the cvs utility on the server with 'git-cvsserver' or manipulate your `.bashrc` +so that calling 'cvs' effectively calls 'git-cvsserver'. Clients known to work --------------------- @@ -290,33 +362,35 @@ checkout, diff, status, update, log, add, remove, commit. Legacy monitoring operations are not supported (edit, watch and related). Exports and tagging (tags and branches) are not supported at this stage. -The server should set the '-k' mode to binary when relevant, however, -this is not really implemented yet. For now, you can force the server -to set '-kb' for all files by setting the `gitcvs.allbinary` config -variable. In proper GIT tradition, the contents of the files are -always respected. No keyword expansion or newline munging is supported. - -Dependencies ------------- - -git-cvsserver depends on DBD::SQLite. - -Copyright and Authors ---------------------- +CRLF Line Ending Conversions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -This program is copyright The Open University UK - 2006. +By default the server leaves the '-k' mode blank for all files, +which causes the CVS client to treat them as a text files, subject +to end-of-line conversion on some platforms. -Authors: +You can make the server use the end-of-line conversion attributes to +set the '-k' modes for files by setting the `gitcvs.usecrlfattr` +config variable. See linkgit:gitattributes[5] for more information +about end-of-line conversion. -- Martyn Smith <martyn@catalyst.net.nz> -- Martin Langhoff <martin@catalyst.net.nz> +Alternatively, if `gitcvs.usecrlfattr` config is not enabled +or the attributes do not allow automatic detection for a filename, then +the server uses the `gitcvs.allbinary` config for the default setting. +If `gitcvs.allbinary` is set, then file not otherwise +specified will default to '-kb' mode. Otherwise the '-k' mode +is left blank. But if `gitcvs.allbinary` is set to "guess", then +the correct '-k' mode will be guessed based on the contents of +the file. -with ideas and patches from participants of the git-list <git@vger.kernel.org>. +For best consistency with 'cvs', it is probably best to override the +defaults by setting `gitcvs.usecrlfattr` to true, +and `gitcvs.allbinary` to "guess". -Documentation --------------- -Documentation by Martyn Smith <martyn@catalyst.net.nz>, Martin Langhoff <martin@catalyst.net.nz>, and Matthias Urlichs <smurf@smurf.noris.de>. +Dependencies +------------ +'git-cvsserver' depends on DBD::SQLite. GIT --- -Part of the gitlink:git[7] suite +Part of the linkgit:git[1] suite |