diff options
Diffstat (limited to 'Documentation/git-config.txt')
| -rw-r--r-- | Documentation/git-config.txt | 134 |
1 files changed, 104 insertions, 30 deletions
diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 7617d9eb24..2608ca74ac 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -14,12 +14,13 @@ SYNOPSIS 'git config' [<file-option>] [type] --replace-all name value [value_regex] 'git config' [<file-option>] [type] [-z|--null] --get name [value_regex] 'git config' [<file-option>] [type] [-z|--null] --get-all name [value_regex] -'git config' [<file-option>] [type] [-z|--null] --get-regexp name_regex [value_regex] +'git config' [<file-option>] [type] [-z|--null] [--name-only] --get-regexp name_regex [value_regex] +'git config' [<file-option>] [type] [-z|--null] --get-urlmatch name URL 'git config' [<file-option>] --unset name [value_regex] 'git config' [<file-option>] --unset-all name [value_regex] 'git config' [<file-option>] --rename-section old_name new_name 'git config' [<file-option>] --remove-section name -'git config' [<file-option>] [-z|--null] -l | --list +'git config' [<file-option>] [-z|--null] [--name-only] -l | --list 'git config' [<file-option>] --get-color name [default] 'git config' [<file-option>] --get-colorbool name [stdout-is-tty] 'git config' [<file-option>] -e | --edit @@ -44,22 +45,26 @@ a "true" or "false" string for bool), or '--path', which does some path expansion (see '--path' below). If no type specifier is passed, no checks or transformations are performed on the value. -The file-option can be one of '--system', '--global' or '--file' -which specify where the values will be read from or written to. -The default is to assume the config file of the current repository, -.git/config unless defined otherwise with GIT_DIR and GIT_CONFIG -(see <<FILES>>). +When reading, the values are read from the system, global and +repository local configuration files by default, and options +'--system', '--global', '--local' and '--file <filename>' can be +used to tell the command to read from only that location (see <<FILES>>). -This command will fail (with exit code ret) if: +When writing, the new value is written to the repository local +configuration file by default, and options '--system', '--global', +'--file <filename>' can be used to tell the command to write to +that location (you can say '--local' but that is the default). + +This command will fail with non-zero status upon error. Some exit +codes are: . The config file is invalid (ret=3), . can not write to the config file (ret=4), . no section or name was provided (ret=2), . the section or key is invalid (ret=1), . you try to unset an option which does not exist (ret=5), -. you try to unset/set an option for which multiple lines match (ret=5), -. you try to use an invalid regexp (ret=6), or -. you use '--global' option without $HOME being properly set (ret=128). +. you try to unset/set an option for which multiple lines match (ret=5), or +. you try to use an invalid regexp (ret=6). On success, the command returns the exit code 0. @@ -78,7 +83,7 @@ OPTIONS --get:: Get the value for a given key (optionally filtered by a regex matching the value). Returns error code 1 if the key was not - found and error code 2 if multiple key values were found. + found and the last value if multiple key values were found. --get-all:: Like get, but does not fail if the number of values for the key @@ -91,28 +96,55 @@ OPTIONS in which section and variable names are lowercased, but subsection names are not. +--get-urlmatch name URL:: + When given a two-part name section.key, the value for + section.<url>.key whose <url> part matches the best to the + given URL is returned (if no such key exists, the value for + section.key is used as a fallback). When given just the + section as name, do so for all the keys in the section and + list them. + --global:: - For writing options: write to global ~/.gitconfig file rather than - the repository .git/config. + For writing options: write to global `~/.gitconfig` file + rather than the repository `.git/config`, write to + `$XDG_CONFIG_HOME/git/config` file if this file exists and the + `~/.gitconfig` file doesn't. + -For reading options: read only from global ~/.gitconfig rather than -from all available files. +For reading options: read only from global `~/.gitconfig` and from +`$XDG_CONFIG_HOME/git/config` rather than from all available files. + See also <<FILES>>. --system:: - For writing options: write to system-wide $(prefix)/etc/gitconfig - rather than the repository .git/config. + For writing options: write to system-wide + `$(prefix)/etc/gitconfig` rather than the repository + `.git/config`. + -For reading options: read only from system-wide $(prefix)/etc/gitconfig +For reading options: read only from system-wide `$(prefix)/etc/gitconfig` rather than from all available files. + See also <<FILES>>. +--local:: + For writing options: write to the repository `.git/config` file. + This is the default behavior. ++ +For reading options: read only from the repository `.git/config` rather than +from all available files. ++ +See also <<FILES>>. + -f config-file:: --file config-file:: Use the given config file instead of the one specified by GIT_CONFIG. +--blob blob:: + Similar to '--file' but use the given blob instead of a file. E.g. + you can use 'master:.gitmodules' to read values from the file + '.gitmodules' in the master branch. See "SPECIFYING REVISIONS" + section in linkgit:gitrevisions[7] for a more complete list of + ways to spell blob names. + --remove-section:: Remove the given section from the configuration file. @@ -127,7 +159,7 @@ See also <<FILES>>. -l:: --list:: - List all variables set in config file. + List all variables set in config file, along with their values. --bool:: 'git config' will ensure that the output is "true" or "false" @@ -158,6 +190,10 @@ See also <<FILES>>. output without getting confused e.g. by values that contain line breaks. +--name-only:: + Output only the names of config variables for `--list` or + `--get-regexp`. + --get-colorbool name [stdout-is-tty]:: Find the color setting for `name` (e.g. `color.diff`) and output @@ -181,24 +217,34 @@ See also <<FILES>>. Opens an editor to modify the specified config file; either '--system', '--global', or repository (default). +--[no-]includes:: + Respect `include.*` directives in config files when looking up + values. Defaults to on. + [[FILES]] FILES ----- -If not set explicitly with '--file', there are three files where +If not set explicitly with '--file', there are four files where 'git config' will search for configuration options: -$GIT_DIR/config:: - Repository specific configuration file. (The filename is - of course relative to the repository root, not the working - directory.) +$(prefix)/etc/gitconfig:: + System-wide configuration file. + +$XDG_CONFIG_HOME/git/config:: + Second user-specific configuration file. If $XDG_CONFIG_HOME is not set + or empty, `$HOME/.config/git/config` will be used. Any single-valued + variable set in this file will be overwritten by whatever is in + `~/.gitconfig`. It is a good idea not to create this file if + you sometimes use older versions of Git, as support for this + file was added fairly recently. ~/.gitconfig:: User-specific configuration file. Also called "global" configuration file. -$(prefix)/etc/gitconfig:: - System-wide configuration file. +$GIT_DIR/config:: + Repository specific configuration file. If no further options are given, all reading options will read all of these files that are available. If the global or the system-wide configuration @@ -206,11 +252,15 @@ file are not available they will be ignored. If the repository configuration file is not available or readable, 'git config' will exit with a non-zero error code. However, in neither case will an error message be issued. +The files are read in the order given above, with last value found taking +precedence over values read earlier. When multiple values are taken then all +values of a key from all files will be used. + All writing options will per default write to the repository specific configuration file. Note that this also affects options like '--replace-all' and '--unset'. *'git config' will only ever change one file at a time*. -You can override these rules either by command line options or by environment +You can override these rules either by command-line options or by environment variables. The '--global' and the '--system' options will limit the file used to the global or system-wide file respectively. The GIT_CONFIG environment variable has a similar effect, but you can specify any filename you want. @@ -224,6 +274,10 @@ GIT_CONFIG:: Using the "--global" option forces this to ~/.gitconfig. Using the "--system" option forces this to $(prefix)/etc/gitconfig. +GIT_CONFIG_NOSYSTEM:: + Whether to skip reading settings from the system-wide + $(prefix)/etc/gitconfig file. See linkgit:git[1] for details. + See also <<FILES>>. @@ -251,9 +305,16 @@ Given a .git/config like this: ; Proxy settings [core] - gitproxy="proxy-command" for kernel.org + gitproxy=proxy-command for kernel.org gitproxy=default-proxy ; for all the rest + ; HTTP + [http] + sslVerify + [http "https://weak.example.com"] + sslVerify = false + cookieFile = /tmp/cookie.txt + you can set the filemode to true with ------------ @@ -326,7 +387,7 @@ To actually match only values with an exclamation mark, you have to To add a new proxy, without altering any of the existing ones, use ------------ -% git config core.gitproxy '"proxy-command" for example.com' +% git config --add core.gitproxy '"proxy-command" for example.com' ------------ An example to use customized color from the configuration in your @@ -339,6 +400,19 @@ RESET=$(git config --get-color "" "reset") echo "${WS}your whitespace color or blue reverse${RESET}" ------------ +For URLs in `https://weak.example.com`, `http.sslVerify` is set to +false, while it is set to `true` for all others: + +------------ +% git config --bool --get-urlmatch http.sslverify https://good.example.com +true +% git config --bool --get-urlmatch http.sslverify https://weak.example.com +false +% git config --get-urlmatch http https://weak.example.com +http.cookieFile /tmp/cookie.txt +http.sslverify false +------------ + include::config.txt[] GIT |