diff options
Diffstat (limited to 'Documentation/git-commit.txt')
| -rw-r--r-- | Documentation/git-commit.txt | 284 |
1 files changed, 210 insertions, 74 deletions
diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index e54fb12103..f400835921 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -8,28 +8,31 @@ git-commit - Record changes to the repository SYNOPSIS -------- [verse] -'git-commit' [-a | --interactive] [-s] [-v] [-u] - [(-c | -C) <commit> | -F <file> | -m <msg> | --amend] - [--no-verify] [-e] [--author <author>] - [--] [[-i | -o ]<file>...] +'git commit' [-a | --interactive | --patch] [-s] [-v] [-u<mode>] [--amend] + [--dry-run] [(-c | -C | --fixup | --squash) <commit>] + [-F <file> | -m <msg>] [--reset-author] [--allow-empty] + [--allow-empty-message] [--no-verify] [-e] [--author=<author>] + [--date=<date>] [--cleanup=<mode>] [--status | --no-status] + [-i | -o] [--] [<file>...] DESCRIPTION ----------- -Use 'git commit' to store the current contents of the index in a new -commit along with a log message describing the changes you have made. +Stores the current contents of the index in a new commit along +with a log message from the user describing the changes. The content to be added can be specified in several ways: -1. by using gitlink:git-add[1] to incrementally "add" changes to the +1. by using 'git add' to incrementally "add" changes to the index before using the 'commit' command (Note: even modified files must be "added"); -2. by using gitlink:git-rm[1] to remove files from the working tree +2. by using 'git rm' to remove files from the working tree and the index, again before using the 'commit' command; 3. by listing files as arguments to the 'commit' command, in which case the commit will ignore changes staged in the index, and instead - record the current content of the listed files; + record the current content of the listed files (which must already + be known to git); 4. by using the -a switch with the 'commit' command to automatically "add" changes from all known files (i.e. all files that are already @@ -37,66 +40,151 @@ The content to be added can be specified in several ways: that have been removed from the working tree, and then perform the actual commit; -5. by using the --interactive switch with the 'commit' command to decide one - by one which files should be part of the commit, before finalizing the - operation. Currently, this is done by invoking `git-add --interactive`. +5. by using the --interactive or --patch switches with the 'commit' command + to decide one by one which files or hunks should be part of the commit, + before finalizing the operation. See the ``Interactive Mode'' section of + linkgit:git-add[1] to learn how to operate these modes. -The gitlink:git-status[1] command can be used to obtain a +The `--dry-run` option can be used to obtain a summary of what is included by any of the above for the next -commit by giving the same set of parameters you would give to -this command. +commit by giving the same set of parameters (options and paths). -If you make a commit and then found a mistake immediately after -that, you can recover from it with gitlink:git-reset[1]. +If you make a commit and then find a mistake immediately after +that, you can recover from it with 'git reset'. OPTIONS ------- --a|--all:: +-a:: +--all:: Tell the command to automatically stage files that have been modified and deleted, but new files you have not told git about are not affected. --c or -C <commit>:: - Take existing commit object, and reuse the log message +-p:: +--patch:: + Use the interactive patch selection interface to chose + which changes to commit. See linkgit:git-add[1] for + details. + +-C <commit>:: +--reuse-message=<commit>:: + Take an existing commit object, and reuse the log message and the authorship information (including the timestamp) - when creating the commit. With '-C', the editor is not - invoked; with '-c' the user can further edit the commit - message. + when creating the commit. + +-c <commit>:: +--reedit-message=<commit>:: + Like '-C', but with '-c' the editor is invoked, so that + the user can further edit the commit message. + +--fixup=<commit>:: + Construct a commit message for use with `rebase --autosquash`. + The commit message will be the subject line from the specified + commit with a prefix of "fixup! ". See linkgit:git-rebase[1] + for details. + +--squash=<commit>:: + Construct a commit message for use with `rebase --autosquash`. + The commit message subject line is taken from the specified + commit with a prefix of "squash! ". Can be used with additional + commit message options (`-m`/`-c`/`-C`/`-F`). See + linkgit:git-rebase[1] for details. + +--reset-author:: + When used with -C/-c/--amend options, or when committing after a + a conflicting cherry-pick, declare that the authorship of the + resulting commit now belongs of the committer. This also renews + the author timestamp. + +--short:: + When doing a dry-run, give the output in the short-format. See + linkgit:git-status[1] for details. Implies `--dry-run`. + +--branch:: + Show the branch and tracking info even in short-format. + +--porcelain:: + When doing a dry-run, give the output in a porcelain-ready + format. See linkgit:git-status[1] for details. Implies + `--dry-run`. + +-z:: +--null:: + When showing `short` or `porcelain` status output, terminate + entries in the status output with NUL, instead of LF. If no + format is given, implies the `--porcelain` output format. -F <file>:: +--file=<file>:: Take the commit message from the given file. Use '-' to read the message from the standard input. ---author <author>:: - Override the author name used in the commit. Use - `A U Thor <author@example.com>` format. - --m <msg>|--message=<msg>:: - Use the given <msg> as the commit message. +--author=<author>:: + Override the commit author. Specify an explicit author using the + standard `A U Thor <author@example.com>` format. Otherwise <author> + is assumed to be a pattern and is used to search for an existing + commit by that author (i.e. rev-list --all -i --author=<author>); + the commit author is then copied from the first such commit found. --t <file>|--template=<file>:: - Use the contents of the given file as the initial version - of the commit message. The editor is invoked and you can - make subsequent changes. If a message is specified using - the `-m` or `-F` options, this option has no effect. This - overrides the `commit.template` configuration variable. +--date=<date>:: + Override the author date used in the commit. --s|--signoff:: - Add Signed-off-by line at the end of the commit message. +-m <msg>:: +--message=<msg>:: + Use the given <msg> as the commit message. +-t <file>:: +--template=<file>:: + When editing the commit message, start the editor with the + contents in the given file. The `commit.template` configuration + variable is often used to give this option implicitly to the + command. This mechanism can be used by projects that want to + guide participants with some hints on what to write in the message + in what order. If the user exits the editor without editing the + message, the commit is aborted. This has no effect when a message + is given by other means, e.g. with the `-m` or `-F` options. + +-s:: +--signoff:: + Add Signed-off-by line by the committer at the end of the commit + log message. + +-n:: --no-verify:: - This option bypasses the pre-commit hook. - See also link:hooks.html[hooks]. - --e|--edit:: + This option bypasses the pre-commit and commit-msg hooks. + See also linkgit:githooks[5]. + +--allow-empty:: + Usually recording a commit that has the exact same tree as its + sole parent commit is a mistake, and the command prevents you + from making such a commit. This option bypasses the safety, and + is primarily for use by foreign SCM interface scripts. + +--allow-empty-message:: + Like --allow-empty this command is primarily for use by foreign + SCM interface scripts. It allows you to create a commit with an + empty commit message without using plumbing commands like + linkgit:git-commit-tree[1]. + +--cleanup=<mode>:: + This option sets how the commit message is cleaned up. + The '<mode>' can be one of 'verbatim', 'whitespace', 'strip', + and 'default'. The 'default' mode will strip leading and + trailing empty lines and #commentary from the commit message + only if the message is to be edited. Otherwise only whitespace + removed. The 'verbatim' mode does not change message at all, + 'whitespace' removes just leading/trailing whitespace lines + and 'strip' removes both whitespace and commentary. + +-e:: +--edit:: The message taken from file with `-F`, command line with `-m`, and from file with `-C` are usually used as the commit log message unmodified. This option lets you further edit the message taken from these sources. --amend:: - Used to amend the tip of the current branch. Prepare the tree object you would want to replace the latest commit as usual (this includes the usual -i/-o and explicit paths), and the @@ -105,6 +193,10 @@ OPTIONS current tip -- if it was a merge, it will have the parents of the current tip as parents -- so the current top commit is discarded. + +--no-post-rewrite:: + Bypass the post-rewrite hook. + + -- It is a rough equivalent for: @@ -116,29 +208,74 @@ It is a rough equivalent for: ------ but can be used to amend a merge commit. -- ++ +You should understand the implications of rewriting history if you +amend a commit that has already been published. (See the "RECOVERING +FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) --i|--include:: +-i:: +--include:: Before making a commit out of staged contents so far, stage the contents of paths given on the command line as well. This is usually not what you want unless you are concluding a conflicted merge. --u|--untracked-files:: - Show all untracked files, also those in uninteresting - directories, in the "Untracked files:" section of commit - message template. Without this option only its name and - a trailing slash are displayed for each untracked - directory. +-o:: +--only:: + Make a commit only from the paths specified on the + command line, disregarding any contents that have been + staged so far. This is the default mode of operation of + 'git commit' if any paths are given on the command line, + in which case this option can be omitted. + If this option is specified together with '--amend', then + no paths need to be specified, which can be used to amend + the last commit without committing changes that have + already been staged. + +-u[<mode>]:: +--untracked-files[=<mode>]:: + Show untracked files. ++ +The mode parameter is optional (defaults to 'all'), and is used to +specify the handling of untracked files; when -u is not used, the +default is 'normal', i.e. show untracked files and directories. ++ +The possible options are: ++ + - 'no' - Show no untracked files + - 'normal' - Shows untracked files and directories + - 'all' - Also shows individual files in untracked directories. ++ +The default can be changed using the status.showUntrackedFiles +configuration variable documented in linkgit:git-config[1]. --v|--verbose:: +-v:: +--verbose:: Show unified diff between the HEAD commit and what would be committed at the bottom of the commit message template. Note that this diff output doesn't have its lines prefixed with '#'. --q|--quiet:: +-q:: +--quiet:: Suppress commit summary message. +--dry-run:: + Do not create a commit, but show a list of paths that are + to be committed, paths with local changes that will be left + uncommitted and paths that are untracked. + +--status:: + Include the output of linkgit:git-status[1] in the commit + message template when using an editor to prepare the commit + message. Defaults to on, but can be used to override + configuration variable commit.status. + +--no-status:: + Do not include the output of linkgit:git-status[1] in the + commit message template when using an editor to prepare the + default commit message. + \--:: Do not interpret any more arguments as options. @@ -149,15 +286,20 @@ but can be used to amend a merge commit. these files are also staged for the next commit on top of what have been staged before. +:git-commit: 1 +include::date-formats.txt[] EXAMPLES -------- When recording your own work, the contents of modified files in your working tree are temporarily stored to a staging area -called the "index" with gitlink:git-add[1]. Removal -of a file is staged with gitlink:git-rm[1]. After building the -state to be committed incrementally with these commands, `git -commit` (without any pathname parameter) is used to record what +called the "index" with 'git add'. A file can be +reverted back, only in the index but not in the working tree, +to that of the last commit with `git reset HEAD -- <file>`, +which effectively reverts 'git add' and prevents the changes to +this file from participating in the next commit. After building +the state to be committed incrementally with these commands, +`git commit` (without any pathname parameter) is used to record what has been staged so far. This is the most basic form of the command. An example: @@ -210,13 +352,13 @@ $ git commit this second commit would record the changes to `hello.c` and `hello.h` as expected. -After a merge (initiated by either gitlink:git-merge[1] or -gitlink:git-pull[1]) stops because of conflicts, cleanly merged +After a merge (initiated by 'git merge' or 'git pull') stops +because of conflicts, cleanly merged paths are already staged to be committed for you, and paths that conflicted are left in unmerged state. You would have to first -check which paths are conflicting with gitlink:git-status[1] +check which paths are conflicting with 'git status' and after fixing them manually in your working tree, you would -stage the result as usual with gitlink:git-add[1]: +stage the result as usual with 'git add': ------------ $ git status | grep unmerged @@ -257,29 +399,23 @@ ENVIRONMENT AND CONFIGURATION VARIABLES The editor used to edit the commit log message will be chosen from the GIT_EDITOR environment variable, the core.editor configuration variable, the VISUAL environment variable, or the EDITOR environment variable (in that -order). +order). See linkgit:git-var[1] for details. HOOKS ----- -This command can run `commit-msg`, `pre-commit`, and -`post-commit` hooks. See link:hooks.html[hooks] for more +This command can run `commit-msg`, `prepare-commit-msg`, `pre-commit`, +and `post-commit` hooks. See linkgit:githooks[5] for more information. SEE ALSO -------- -gitlink:git-add[1], -gitlink:git-rm[1], -gitlink:git-mv[1], -gitlink:git-merge[1], -gitlink:git-commit-tree[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <junkio@cox.net> - +linkgit:git-add[1], +linkgit:git-rm[1], +linkgit:git-mv[1], +linkgit:git-merge[1], +linkgit:git-commit-tree[1] GIT --- -Part of the gitlink:git[7] suite +Part of the linkgit:git[1] suite |