diff options
Diffstat (limited to 'Documentation/git-checkout.txt')
| -rw-r--r-- | Documentation/git-checkout.txt | 157 |
1 files changed, 137 insertions, 20 deletions
diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 7958a47006..d263a5652f 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -9,7 +9,8 @@ SYNOPSIS -------- [verse] 'git checkout' [-q] [-f] [-m] [<branch>] -'git checkout' [-q] [-f] [-m] [--detach] [<commit>] +'git checkout' [-q] [-f] [-m] --detach [<branch>] +'git checkout' [-q] [-f] [-m] [--detach] <commit> 'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... 'git checkout' [-p|--patch] [<tree-ish>] [--] [<paths>...] @@ -21,18 +22,34 @@ or the specified tree. If no paths are given, 'git checkout' will also update `HEAD` to set the specified branch as the current branch. -'git checkout' [<branch>]:: +'git checkout' <branch>:: + To prepare for working on <branch>, switch to it by updating + the index and the files in the working tree, and by pointing + HEAD at the branch. Local modifications to the files in the + working tree are kept, so that they can be committed to the + <branch>. ++ +If <branch> is not found but there does exist a tracking branch in +exactly one remote (call it <remote>) with a matching name, treat as +equivalent to ++ +------------ +$ git checkout -b <branch> --track <remote>/<branch> +------------ ++ +You could omit <branch>, in which case the command degenerates to +"check out the current branch", which is a glorified no-op with a +rather expensive side-effects to show only the tracking information, +if exists, for the current branch. + 'git checkout' -b|-B <new_branch> [<start point>]:: -'git checkout' [--detach] [<commit>]:: - This form switches branches by updating the index, working - tree, and HEAD to reflect the specified branch or commit. -+ -If `-b` is given, a new branch is created as if linkgit:git-branch[1] -were called and then checked out; in this case you can -use the `--track` or `--no-track` options, which will be passed to -'git branch'. As a convenience, `--track` without `-b` implies branch -creation; see the description of `--track` below. + Specifying `-b` causes a new branch to be created as if + linkgit:git-branch[1] were called and then checked out. In + this case you can use the `--track` or `--no-track` options, + which will be passed to 'git branch'. As a convenience, + `--track` without `-b` implies branch creation; see the + description of `--track` below. + If `-B` is given, <new_branch> is created if it doesn't exist; otherwise, it is reset. This is the transactional equivalent of @@ -45,6 +62,22 @@ $ git checkout <branch> that is to say, the branch is not reset/created unless "git checkout" is successful. +'git checkout' --detach [<branch>]:: +'git checkout' [--detach] <commit>:: + + Prepare to work on top of <commit>, by detaching HEAD at it + (see "DETACHED HEAD" section), and updating the index and the + files in the working tree. Local modifications to the files + in the working tree are kept, so that the resulting working + tree will be the state recorded in the commit plus the local + modifications. ++ +When the <commit> argument is a branch name, the `--detach` option can +be used to detach HEAD at the tip of the branch (`git checkout +<branch>` would check out that branch without detaching HEAD). ++ +Omitting <branch> detaches HEAD at the tip of the current branch. + 'git checkout' [-p|--patch] [<tree-ish>] [--] <pathspec>...:: When <paths> or `--patch` are given, 'git checkout' does *not* @@ -100,9 +133,9 @@ entries; instead, unmerged entries are ignored. "--track" in linkgit:git-branch[1] for details. + If no '-b' option is given, the name of the new branch will be -derived from the remote-tracking branch. If "remotes/" or "refs/remotes/" -is prefixed it is stripped away, and then the part up to the -next slash (which would be the nickname of the remote) is removed. +derived from the remote-tracking branch, by looking at the local part of +the refspec configured for the corresponding remote, and then stripping +the initial part up to the "*". This would tell us to use "hack" as the local branch when branching off of "origin/hack" (or "remotes/origin/hack", or even "refs/remotes/origin/hack"). If the given name has no slash, or the above @@ -111,7 +144,7 @@ explicitly give a name with '-b' in such a case. --no-track:: Do not set up "upstream" configuration, even if the - branch.autosetupmerge configuration variable is true. + branch.autoSetupMerge configuration variable is true. -l:: Create the new branch's reflog; see linkgit:git-branch[1] for @@ -149,6 +182,12 @@ branch by running "git rm -rf ." from the top level of the working tree. Afterwards you will be ready to prepare your new files, repopulating the working tree, by copying them from elsewhere, extracting a tarball, etc. +--ignore-skip-worktree-bits:: + In sparse checkout mode, `git checkout -- <paths>` would + update only entries matched by <paths> and sparse patterns + in $GIT_DIR/info/sparse-checkout. This option ignores + the sparse patterns and adds back any files in <paths>. + -m:: --merge:: When switching branches, @@ -171,7 +210,7 @@ the conflicted merge in the specified paths. --conflict=<style>:: The same as --merge option above, but changes the way the conflicting hunks are presented, overriding the - merge.conflictstyle configuration variable. Possible values are + merge.conflictStyle configuration variable. Possible values are "merge" (default) and "diff3" (in addition to what is shown by "merge" style, shows the original contents). @@ -186,6 +225,19 @@ This means that you can use `git checkout -p` to selectively discard edits from your current working tree. See the ``Interactive Mode'' section of linkgit:git-add[1] to learn how to operate the `--patch` mode. +--to=<path>:: + Check out a branch in a separate working directory at + `<path>`. A new working directory is linked to the current + repository, sharing everything except working directory + specific files such as HEAD, index... See "MULTIPLE WORKING + TREES" section for more information. + +--ignore-other-worktrees:: + `git checkout` refuses when the wanted ref is already checked + out by another worktree. This option makes it check the ref + out anyway. In other words, the ref can be held by more than one + worktree. + <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, when prepended with "refs/heads/", is a valid ref), then that @@ -193,8 +245,8 @@ section of linkgit:git-add[1] to learn how to operate the `--patch` mode. commit, your HEAD becomes "detached" and you are no longer on any branch (see below for details). + -As a special case, the `"@{-N}"` syntax for the N-th last branch -checks out the branch (instead of detaching). You may also specify +As a special case, the `"@{-N}"` syntax for the N-th last branch/commit +checks out branches (instead of detaching). You may also specify `-` which is synonymous with `"@{-1}"`. + As a further special case, you may use `"A...B"` as a shortcut for the @@ -302,7 +354,7 @@ a---b---c---d branch 'master' (refers to commit 'd') tag 'v2.0' (refers to commit 'b') ------------ -In fact, we can perform all the normal git operations. But, let's look +In fact, we can perform all the normal Git operations. But, let's look at what happens when we then checkout master: ------------ @@ -319,7 +371,7 @@ a---b---c---d branch 'master' (refers to commit 'd') It is important to realize that at this point nothing refers to commit 'f'. Eventually commit 'f' (and by extension commit 'e') will be deleted -by the routine git garbage collection process, unless we create a reference +by the routine Git garbage collection process, unless we create a reference before that happens. If we have not yet moved away from commit 'f', any of these will create a reference to it: @@ -349,6 +401,71 @@ $ git reflog -2 HEAD # or $ git log -g -2 HEAD ------------ +MULTIPLE WORKING TREES +---------------------- + +A git repository can support multiple working trees, allowing you to check +out more than one branch at a time. With `git checkout --to` a new working +tree is associated with the repository. This new working tree is called a +"linked working tree" as opposed to the "main working tree" prepared by "git +init" or "git clone". A repository has one main working tree (if it's not a +bare repository) and zero or more linked working trees. + +Each linked working tree has a private sub-directory in the repository's +$GIT_DIR/worktrees directory. The private sub-directory's name is usually +the base name of the linked working tree's path, possibly appended with a +number to make it unique. For example, when `$GIT_DIR=/path/main/.git` the +command `git checkout --to /path/other/test-next next` creates the linked +working tree in `/path/other/test-next` and also creates a +`$GIT_DIR/worktrees/test-next` directory (or `$GIT_DIR/worktrees/test-next1` +if `test-next` is already taken). + +Within a linked working tree, $GIT_DIR is set to point to this private +directory (e.g. `/path/main/.git/worktrees/test-next` in the example) and +$GIT_COMMON_DIR is set to point back to the main working tree's $GIT_DIR +(e.g. `/path/main/.git`). These settings are made in a `.git` file located at +the top directory of the linked working tree. + +Path resolution via `git rev-parse --git-path` uses either +$GIT_DIR or $GIT_COMMON_DIR depending on the path. For example, in the +linked working tree `git rev-parse --git-path HEAD` returns +`/path/main/.git/worktrees/test-next/HEAD` (not +`/path/other/test-next/.git/HEAD` or `/path/main/.git/HEAD`) while `git +rev-parse --git-path refs/heads/master` uses +$GIT_COMMON_DIR and returns `/path/main/.git/refs/heads/master`, +since refs are shared across all working trees. + +See linkgit:gitrepository-layout[5] for more information. The rule of +thumb is do not make any assumption about whether a path belongs to +$GIT_DIR or $GIT_COMMON_DIR when you need to directly access something +inside $GIT_DIR. Use `git rev-parse --git-path` to get the final path. + +When you are done with a linked working tree you can simply delete it. +The working tree's entry in the repository's $GIT_DIR/worktrees +directory will eventually be removed automatically (see +`gc.pruneworktreesexpire` in linkgit::git-config[1]), or you can run +`git prune --worktrees` in the main or any linked working tree to +clean up any stale entries in $GIT_DIR/worktrees. + +If you move a linked working directory to another file system, or +within a file system that does not support hard links, you need to run +at least one git command inside the linked working directory +(e.g. `git status`) in order to update its entry in $GIT_DIR/worktrees +so that it does not get automatically removed. + +To prevent a $GIT_DIR/worktrees entry from from being pruned (which +can be useful in some situations, such as when the +entry's working tree is stored on a portable device), add a file named +'locked' to the entry's directory. The file contains the reason in +plain text. For example, if a linked working tree's `.git` file points +to `/path/main/.git/worktrees/test-next` then a file named +`/path/main/.git/worktrees/test-next/locked` will prevent the +`test-next` entry from being pruned. See +linkgit:gitrepository-layout[5] for details. + +Multiple checkout support for submodules is incomplete. It is NOT +recommended to make multiple checkouts of a superproject. + EXAMPLES -------- |