diff options
Diffstat (limited to 'Documentation/git-cat-file.txt')
| -rw-r--r-- | Documentation/git-cat-file.txt | 207 |
1 files changed, 192 insertions, 15 deletions
diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 2fb95bbd19..eb3d6945a9 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -9,8 +9,8 @@ git-cat-file - Provide content or type and size information for repository objec SYNOPSIS -------- [verse] -'git cat-file' (-t | -s | -e | -p | <type> | --textconv ) <object> -'git cat-file' (--batch | --batch-check) < <list-of-objects> +'git cat-file' (-t [--allow-unknown-type]| -s [--allow-unknown-type]| -e | -p | <type> | --textconv ) <object> +'git cat-file' (--batch | --batch-check) [--follow-symlinks] DESCRIPTION ----------- @@ -20,7 +20,7 @@ object type, or '-s' is used to find the object size, or '--textconv' is used (which implies type "blob"). In the second form, a list of objects (separated by linefeeds) is provided on -stdin, and the SHA1, type, and size of each object is printed on stdout. +stdin, and the SHA-1, type, and size of each object is printed on stdout. OPTIONS ------- @@ -54,16 +54,93 @@ OPTIONS --textconv:: Show the content as transformed by a textconv filter. In this case, - <object> has be of the form <treeish>:<path>, or :<path> in order + <object> has be of the form <tree-ish>:<path>, or :<path> in order to apply the filter to the content recorded in the index at <path>. --batch:: - Print the SHA1, type, size, and contents of each object provided on - stdin. May not be combined with any other options or arguments. +--batch=<format>:: + Print object information and contents for each object provided + on stdin. May not be combined with any other options or arguments. + See the section `BATCH OUTPUT` below for details. --batch-check:: - Print the SHA1, type, and size of each object provided on stdin. May not - be combined with any other options or arguments. +--batch-check=<format>:: + Print object information for each object provided on stdin. May + not be combined with any other options or arguments. See the + section `BATCH OUTPUT` below for details. + +--batch-all-objects:: + Instead of reading a list of objects on stdin, perform the + requested batch operation on all objects in the repository and + any alternate object stores (not just reachable objects). + Requires `--batch` or `--batch-check` be specified. Note that + the objects are visited in order sorted by their hashes. + +--buffer:: + Normally batch output is flushed after each object is output, so + that a process can interactively read and write from + `cat-file`. With this option, the output uses normal stdio + buffering; this is much more efficient when invoking + `--batch-check` on a large number of objects. + +--allow-unknown-type:: + Allow -s or -t to query broken/corrupt objects of unknown type. + +--follow-symlinks:: + With --batch or --batch-check, follow symlinks inside the + repository when requesting objects with extended SHA-1 + expressions of the form tree-ish:path-in-tree. Instead of + providing output about the link itself, provide output about + the linked-to object. If a symlink points outside the + tree-ish (e.g. a link to /foo or a root-level link to ../foo), + the portion of the link which is outside the tree will be + printed. ++ +This option does not (currently) work correctly when an object in the +index is specified (e.g. `:link` instead of `HEAD:link`) rather than +one in the tree. ++ +This option cannot (currently) be used unless `--batch` or +`--batch-check` is used. ++ +For example, consider a git repository containing: ++ +-- + f: a file containing "hello\n" + link: a symlink to f + dir/link: a symlink to ../f + plink: a symlink to ../f + alink: a symlink to /etc/passwd +-- ++ +For a regular file `f`, `echo HEAD:f | git cat-file --batch` would print ++ +-- + ce013625030ba8dba906f756967f9e9ca394464a blob 6 +-- ++ +And `echo HEAD:link | git cat-file --batch --follow-symlinks` would +print the same thing, as would `HEAD:dir/link`, as they both point at +`HEAD:f`. ++ +Without `--follow-symlinks`, these would print data about the symlink +itself. In the case of `HEAD:link`, you would see ++ +-- + 4d1ae35ba2c8ec712fa2a379db44ad639ca277bd blob 1 +-- ++ +Both `plink` and `alink` point outside the tree, so they would +respectively print: ++ +-- + symlink 4 + ../f + + symlink 11 + /etc/passwd +-- + OUTPUT ------ @@ -78,27 +155,127 @@ If '-p' is specified, the contents of <object> are pretty-printed. If <type> is specified, the raw (though uncompressed) contents of the <object> will be returned. -If '--batch' is specified, output of the following form is printed for each -object specified on stdin: +BATCH OUTPUT +------------ + +If `--batch` or `--batch-check` is given, `cat-file` will read objects +from stdin, one per line, and print information about them. By default, +the whole line is considered as an object, as if it were fed to +linkgit:git-rev-parse[1]. + +You can specify the information shown for each object by using a custom +`<format>`. The `<format>` is copied literally to stdout for each +object, with placeholders of the form `%(atom)` expanded, followed by a +newline. The available atoms are: + +`objectname`:: + The 40-hex object name of the object. + +`objecttype`:: + The type of of the object (the same as `cat-file -t` reports). + +`objectsize`:: + The size, in bytes, of the object (the same as `cat-file -s` + reports). + +`objectsize:disk`:: + The size, in bytes, that the object takes up on disk. See the + note about on-disk sizes in the `CAVEATS` section below. + +`deltabase`:: + If the object is stored as a delta on-disk, this expands to the + 40-hex sha1 of the delta base object. Otherwise, expands to the + null sha1 (40 zeroes). See `CAVEATS` below. + +`rest`:: + If this atom is used in the output string, input lines are split + at the first whitespace boundary. All characters before that + whitespace are considered to be the object name; characters + after that first run of whitespace (i.e., the "rest" of the + line) are output in place of the `%(rest)` atom. + +If no format is specified, the default format is `%(objectname) +%(objecttype) %(objectsize)`. + +If `--batch` is specified, the object information is followed by the +object contents (consisting of `%(objectsize)` bytes), followed by a +newline. + +For example, `--batch` without a custom format would produce: ------------ <sha1> SP <type> SP <size> LF <contents> LF ------------ -If '--batch-check' is specified, output of the following form is printed for -each object specified on stdin: +Whereas `--batch-check='%(objectname) %(objecttype)'` would produce: ------------ -<sha1> SP <type> SP <size> LF +<sha1> SP <type> LF +------------ + +If a name is specified on stdin that cannot be resolved to an object in +the repository, then `cat-file` will ignore any custom format and print: + +------------ +<object> SP missing LF ------------ -For both '--batch' and '--batch-check', output of the following form is printed -for each object specified on stdin that does not exist in the repository: +If --follow-symlinks is used, and a symlink in the repository points +outside the repository, then `cat-file` will ignore any custom format +and print: + +------------ +symlink SP <size> LF +<symlink> LF +------------ + +The symlink will either be absolute (beginning with a /), or relative +to the tree root. For instance, if dir/link points to ../../foo, then +<symlink> will be ../foo. <size> is the size of the symlink in bytes. + +If --follow-symlinks is used, the following error messages will be +displayed: ------------ <object> SP missing LF ------------ +is printed when the initial symlink requested does not exist. + +------------ +dangling SP <size> LF +<object> LF +------------ +is printed when the initial symlink exists, but something that +it (transitive-of) points to does not. + +------------ +loop SP <size> LF +<object> LF +------------ +is printed for symlink loops (or any symlinks that +require more than 40 link resolutions to resolve). + +------------ +notdir SP <size> LF +<object> LF +------------ +is printed when, during symlink resolution, a file is used as a +directory name. + +CAVEATS +------- + +Note that the sizes of objects on disk are reported accurately, but care +should be taken in drawing conclusions about which refs or objects are +responsible for disk usage. The size of a packed non-delta object may be +much larger than the size of objects which delta against it, but the +choice of which object is the base and which is the delta is arbitrary +and is subject to change during a repack. + +Note also that multiple copies of an object may be present in the object +database; in this case, it is undefined which copy's size or delta base +will be reported. GIT --- |