diff options
Diffstat (limited to 'Documentation/git-branch.txt')
| -rw-r--r-- | Documentation/git-branch.txt | 109 |
1 files changed, 81 insertions, 28 deletions
diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 0427e80a35..4a7037f1c8 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -10,8 +10,12 @@ SYNOPSIS [verse] 'git branch' [--color[=<when>] | --no-color] [-r | -a] [--list] [-v [--abbrev=<length> | --no-abbrev]] - [(--merged | --no-merged | --contains) [<commit>]] [<pattern>...] + [--column[=<options>] | --no-column] + [(--merged | --no-merged | --contains) [<commit>]] [--sort=<key>] + [--points-at <object>] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] +'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>] +'git branch' --unset-upstream [<branchname>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> 'git branch' (-d | -D) [-r] <branchname>... 'git branch' --edit-description [<branchname>] @@ -19,13 +23,15 @@ SYNOPSIS DESCRIPTION ----------- -With no arguments, existing branches are listed and the current branch will -be highlighted with an asterisk. Option `-r` causes the remote-tracking -branches to be listed, and option `-a` shows both. This list mode is also -activated by the `--list` option (see below). -<pattern> restricts the output to matching branches, the pattern is a shell -wildcard (i.e., matched using fnmatch(3)) -Multiple patterns may be given; if any of them matches, the tag is shown. +If `--list` is given, or if there are no non-option arguments, existing +branches are listed; the current branch will be highlighted with an +asterisk. Option `-r` causes the remote-tracking branches to be listed, +and option `-a` shows both local and remote branches. If a `<pattern>` +is given, it is used as a shell wildcard to restrict the output to +matching branches. If multiple patterns are given, a branch is shown if +it matches any of the patterns. Note that when providing a +`<pattern>`, you must use `--list`; otherwise the command is interpreted +as branch creation. With `--contains`, shows only the branches that contain the named commit (in other words, the branches whose tip commits are descendants of the @@ -42,14 +48,15 @@ Note that this will create the new branch, but it will not switch the working tree to it; use "git checkout <newbranch>" to switch to the new branch. -When a local branch is started off a remote-tracking branch, git sets up the -branch so that 'git pull' will appropriately merge from +When a local branch is started off a remote-tracking branch, Git sets up the +branch (specifically the `branch.<name>.remote` and `branch.<name>.merge` +configuration entries) so that 'git pull' will appropriately merge from the remote-tracking branch. This behavior may be changed via the global -`branch.autosetupmerge` configuration flag. That setting can be +`branch.autoSetupMerge` configuration flag. That setting can be overridden by using the `--track` and `--no-track` options, and -changed later using `git branch --set-upstream`. +changed later using `git branch --set-upstream-to`. -With a '-m' or '-M' option, <oldbranch> will be renamed to <newbranch>. +With a `-m` or `-M` option, <oldbranch> will be renamed to <newbranch>. If <oldbranch> had a corresponding reflog, it is renamed to match <newbranch>, and a reflog entry is created to remember the branch renaming. If <newbranch> exists, -M must be used to force the rename @@ -59,7 +66,7 @@ With a `-d` or `-D` option, `<branchname>` will be deleted. You may specify more than one branch for deletion. If the branch currently has a reflog then the reflog will also be deleted. -Use -r together with -d to delete remote-tracking branches. Note, that it +Use `-r` together with `-d` to delete remote-tracking branches. Note, that it only makes sense to delete remote-tracking branches if they no longer exist in the remote repository or if 'git fetch' was configured not to fetch them again. See also the 'prune' subcommand of linkgit:git-remote[1] for a @@ -75,7 +82,7 @@ OPTIONS `--track` or `--set-upstream`. -D:: - Delete a branch irrespective of its merged status. + Shortcut for `--delete --force`. -l:: --create-reflog:: @@ -89,13 +96,17 @@ OPTIONS --force:: Reset <branchname> to <startpoint> if <branchname> exists already. Without `-f` 'git branch' refuses to change an existing branch. + In combination with `-d` (or `--delete`), allow deleting the + branch irrespective of its merged status. In combination with + `-m` (or `--move`), allow renaming the branch even if the new + branch name already exists. -m:: --move:: Move/rename a branch and the corresponding reflog. -M:: - Move/rename a branch even if the new branch name already exists. + Shortcut for `--move --force`. --color[=<when>]:: Color branches to highlight current, local, and @@ -107,6 +118,14 @@ OPTIONS default to color output. Same as `--color=never`. +--column[=<options>]:: +--no-column:: + Display branch listing in columns. See configuration variable + column.branch for option syntax.`--column` and `--no-column` + without options are equivalent to 'always' and 'never' respectively. ++ +This option is only applicable in non-verbose mode. + -r:: --remotes:: List or delete (if used with -d) the remote-tracking branches. @@ -120,11 +139,18 @@ OPTIONS use `git branch --list <pattern>` to list matching branches. -v:: +-vv:: --verbose:: When in list mode, show sha1 and commit subject line for each head, along with relationship to upstream branch (if any). If given twice, print - the name of the upstream branch, as well. + the name of the upstream branch, as well (see also `git remote + show <remote>`). + +-q:: +--quiet:: + Be more quiet when creating or deleting a branch, suppressing + non-error messages. --abbrev=<length>:: Alter the sha1's minimum display length in the output listing. @@ -136,7 +162,8 @@ OPTIONS -t:: --track:: - When creating a new branch, set up configuration to mark the + When creating a new branch, set up `branch.<name>.remote` and + `branch.<name>.merge` configuration entries to mark the start-point branch as "upstream" from the new branch. This configuration will tell git to show the relationship between the two branches in `git status` and `git branch -v`. Furthermore, @@ -144,35 +171,48 @@ OPTIONS upstream when the new branch is checked out. + This behavior is the default when the start point is a remote-tracking branch. -Set the branch.autosetupmerge configuration variable to `false` if you +Set the branch.autoSetupMerge configuration variable to `false` if you want `git checkout` and `git branch` to always behave as if '--no-track' were given. Set it to `always` if you want this behavior when the start-point is either a local or remote-tracking branch. --no-track:: Do not set up "upstream" configuration, even if the - branch.autosetupmerge configuration variable is true. + branch.autoSetupMerge configuration variable is true. --set-upstream:: - If specified branch does not exist yet or if '--force' has been - given, acts exactly like '--track'. Otherwise sets up configuration - like '--track' would when creating the branch, except that where + If specified branch does not exist yet or if `--force` has been + given, acts exactly like `--track`. Otherwise sets up configuration + like `--track` would when creating the branch, except that where branch points to is not changed. +-u <upstream>:: +--set-upstream-to=<upstream>:: + Set up <branchname>'s tracking information so <upstream> is + considered <branchname>'s upstream branch. If no <branchname> + is specified, then it defaults to the current branch. + +--unset-upstream:: + Remove the upstream information for <branchname>. If no branch + is specified it defaults to the current branch. + --edit-description:: Open an editor and edit the text to explain what the branch is - for, to be used by various other commands (e.g. `request-pull`). + for, to be used by various other commands (e.g. `format-patch`, + `request-pull`, and `merge` (if enabled)). Multi-line explanations + may be used. ---contains <commit>:: - Only list branches which contain the specified commit. +--contains [<commit>]:: + Only list branches which contain the specified commit (HEAD + if not specified). Implies `--list`. --merged [<commit>]:: Only list branches whose tips are reachable from the - specified commit (HEAD if not specified). + specified commit (HEAD if not specified). Implies `--list`. --no-merged [<commit>]:: Only list branches whose tips are not reachable from the - specified commit (HEAD if not specified). + specified commit (HEAD if not specified). Implies `--list`. <branchname>:: The name of the branch to create or delete. @@ -192,6 +232,19 @@ start-point is either a local or remote-tracking branch. The new name for an existing branch. The same restrictions as for <branchname> apply. +--sort=<key>:: + Sort based on the key given. Prefix `-` to sort in descending + order of the value. You may use the --sort=<key> option + multiple times, in which case the last key becomes the primary + key. The keys supported are the same as those in `git + for-each-ref`. Sort order defaults to sorting based on the + full refname (including `refs/...` prefix). This lists + detached HEAD (if present) first, then local branches and + finally remote-tracking branches. + + +--points-at <object>:: + Only list branches of the given object. Examples -------- |