diff options
Diffstat (limited to 'Documentation/git-blame.txt')
| -rw-r--r-- | Documentation/git-blame.txt | 114 |
1 files changed, 70 insertions, 44 deletions
diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index 66f1203701..7ee923629e 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -8,9 +8,9 @@ git-blame - Show what revision and author last modified each line of a file SYNOPSIS -------- [verse] -'git-blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-p] [-w] [--incremental] [-L n,m] - [-S <revs-file>] [-M] [-C] [-C] [--since=<date>] - [<rev> | --contents <file>] [--] <file> +'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-e] [-p] [-w] [--incremental] [-L n,m] + [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] [--abbrev=<n>] + [<rev> | --contents <file> | --reverse <rev>] [--] <file> DESCRIPTION ----------- @@ -18,10 +18,10 @@ DESCRIPTION Annotates each line in the given file with information from the revision which last modified the line. Optionally, start annotating from the given revision. -Also it can limit the range of lines annotated. +The command can also limit the range of lines annotated. -This report doesn't tell you anything about lines which have been deleted or -replaced; you need to use a tool such as gitlink:git-diff[1] or the "pickaxe" +The report does not tell you anything about lines which have been deleted or +replaced; you need to use a tool such as 'git diff' or the "pickaxe" interface briefly mentioned in the following paragraph. Apart from supporting file annotation, git also supports searching the @@ -41,31 +41,42 @@ OPTIONS include::blame-options.txt[] -c:: - Use the same output mode as gitlink:git-annotate[1] (Default: off). + Use the same output mode as linkgit:git-annotate[1] (Default: off). --score-debug:: Include debugging information related to the movement of lines between files (see `-C`) and lines moved within a file (see `-M`). The first number listed is the score. This is the number of alphanumeric characters detected - to be moved between or within files. This must be above - a certain threshold for git-blame to consider those lines + as having been moved between or within files. This must be above + a certain threshold for 'git blame' to consider those lines of code to have been moved. --f, --show-name:: - Show filename in the original commit. By default - filename is shown if there is any line that came from a - file with different name, due to rename detection. +-f:: +--show-name:: + Show the filename in the original commit. By default + the filename is shown if there is any line that came from a + file with a different name, due to rename detection. --n, --show-number:: - Show line number in the original commit (Default: off). +-n:: +--show-number:: + Show the line number in the original commit (Default: off). -s:: - Suppress author name and timestamp from the output. + Suppress the author name and timestamp from the output. + +-e:: +--show-email:: + Show the author email instead of author name (Default: off). -w:: - Ignore whitespace when comparing parent's version and - child's to find where the lines came from. + Ignore whitespace when comparing the parent's version and + the child's to find where the lines came from. + +--abbrev=<n>:: + Instead of using the default 7+1 hexadecimal digits as the + abbreviated object name, use <n>+1 digits. Note that 1 column + is used for a caret to mark the boundary commit. THE PORCELAIN FORMAT @@ -77,46 +88,59 @@ header at the minimum has the first line which has: - 40-byte SHA-1 of the commit the line is attributed to; - the line number of the line in the original file; - the line number of the line in the final file; -- on a line that starts a group of line from a different +- on a line that starts a group of lines from a different commit than the previous one, the number of lines in this group. On subsequent lines this field is absent. This header line is followed by the following information at least once for each commit: -- author name ("author"), email ("author-mail"), time +- the author name ("author"), email ("author-mail"), time ("author-time"), and timezone ("author-tz"); similarly for committer. -- filename in the commit the line is attributed to. +- the filename in the commit that the line is attributed to. - the first line of the commit log message ("summary"). The contents of the actual line is output after the above header, prefixed by a TAB. This is to allow adding more header elements later. +The porcelain format generally suppresses commit information that has +already been seen. For example, two lines that are blamed to the same +commit will both be shown, but the details for that commit will be shown +only once. This is more efficient, but may require more state be kept by +the reader. The `--line-porcelain` option can be used to output full +commit information for each line, allowing simpler (but less efficient) +usage like: + + # count the number of lines attributed to each author + git blame --line-porcelain file | + sed -n 's/^author //p' | + sort | uniq -c | sort -rn + SPECIFYING RANGES ----------------- -Unlike `git-blame` and `git-annotate` in older git, the extent -of annotation can be limited to both line ranges and revision +Unlike 'git blame' and 'git annotate' in older versions of git, the extent +of the annotation can be limited to both line ranges and revision ranges. When you are interested in finding the origin for -ll. 40-60 for file `foo`, you can use `-L` option like these +lines 40-60 for file `foo`, you can use the `-L` option like so (they mean the same thing -- both ask for 21 lines starting at line 40): git blame -L 40,60 foo git blame -L 40,+21 foo -Also you can use regular expression to specify the line range. +Also you can use a regular expression to specify the line range: git blame -L '/^sub hello {/,/^}$/' foo -would limit the annotation to the body of `hello` subroutine. +which limits the annotation to the body of the `hello` subroutine. -When you are not interested in changes older than the version +When you are not interested in changes older than version v2.6.18, or changes older than 3 weeks, you can use revision -range specifiers similar to `git-rev-list`: +range specifiers similar to 'git rev-list': git blame v2.6.18.. -- foo git blame --since=3.weeks -- foo @@ -127,7 +151,7 @@ commit v2.6.18 or the most recent commit that is more than 3 weeks old in the above example) are blamed for that range boundary commit. -A particularly useful way is to see if an added file have lines +A particularly useful way is to see if an added file has lines created by copy-and-paste from existing files. Sometimes this indicates that the developer was being sloppy and did not refactor the code properly. You can first find the commit that @@ -136,7 +160,7 @@ introduced the file with: git log --diff-filter=A --pretty=short -- foo and then annotate the change between the commit and its -parents, using `commit{caret}!` notation: +parents, using `commit^!` notation: git blame -C -C -f $commit^! -- foo @@ -160,36 +184,38 @@ annotated. + Line numbers count from 1. -. The first time that commit shows up in the stream, it has various +. The first time that a commit shows up in the stream, it has various other information about it printed out with a one-word tag at the - beginning of each line about that "extended commit info" (author, - email, committer, dates, summary etc). + beginning of each line describing the extra commit information (author, + email, committer, dates, summary, etc.). -. Unlike Porcelain format, the filename information is always +. Unlike the Porcelain format, the filename information is always given and terminates the entry: "filename" <whitespace-quoted-filename-goes-here> + -and thus it's really quite easy to parse for some line- and word-oriented +and thus it is really quite easy to parse for some line- and word-oriented parser (which should be quite natural for most scripting languages). + [NOTE] For people who do parsing: to make it more robust, just ignore any -lines in between the first and last one ("<sha1>" and "filename" lines) -where you don't recognize the tag-words (or care about that particular +lines between the first and last one ("<sha1>" and "filename" lines) +where you do not recognize the tag words (or care about that particular one) at the beginning of the "extended information" lines. That way, if there is ever added information (like the commit encoding or extended -commit commentary), a blame viewer won't ever care. +commit commentary), a blame viewer will not care. + + +MAPPING AUTHORS +--------------- + +include::mailmap.txt[] SEE ALSO -------- -gitlink:git-annotate[1] - -AUTHOR ------- -Written by Junio C Hamano <junkio@cox.net> +linkgit:git-annotate[1] GIT --- -Part of the gitlink:git[7] suite +Part of the linkgit:git[1] suite |