diff options
Diffstat (limited to 'Documentation/doc-diff')
| -rwxr-xr-x | Documentation/doc-diff | 115 |
1 files changed, 96 insertions, 19 deletions
diff --git a/Documentation/doc-diff b/Documentation/doc-diff index f483fe427c..1694300e50 100755 --- a/Documentation/doc-diff +++ b/Documentation/doc-diff @@ -1,23 +1,62 @@ #!/bin/sh +# +# Build two documentation trees and diff the resulting formatted output. +# Compared to a source diff, this can reveal mistakes in the formatting. +# For example: +# +# ./doc-diff origin/master HEAD +# +# would show the differences introduced by a branch based on master. OPTIONS_SPEC="\ doc-diff [options] <from> <to> [-- <diff-options>] +doc-diff (-c|--clean) -- -j=n parallel argument to pass to make -f force rebuild; do not rely on cached results +j=n parallel argument to pass to make +f force rebuild; do not rely on cached results +c,clean cleanup temporary working files +from-asciidoc use asciidoc with the 'from'-commit +from-asciidoctor use asciidoctor with the 'from'-commit +asciidoc use asciidoc with both commits +to-asciidoc use asciidoc with the 'to'-commit +to-asciidoctor use asciidoctor with the 'to'-commit +asciidoctor use asciidoctor with both commits +cut-footer cut away footer " SUBDIRECTORY_OK=1 . "$(git --exec-path)/git-sh-setup" parallel= force= +clean= +from_program= +to_program= +cut_footer= while test $# -gt 0 do case "$1" in -j) parallel=$2; shift ;; + -c|--clean) + clean=t ;; -f) force=t ;; + --from-asciidoctor) + from_program=-asciidoctor ;; + --to-asciidoctor) + to_program=-asciidoctor ;; + --asciidoctor) + from_program=-asciidoctor + to_program=-asciidoctor ;; + --from-asciidoc) + from_program=-asciidoc ;; + --to-asciidoc) + to_program=-asciidoc ;; + --asciidoc) + from_program=-asciidoc + to_program=-asciidoc ;; + --cut-footer) + cut_footer=-cut-footer ;; --) shift; break ;; *) @@ -26,6 +65,16 @@ do shift done +tmp="$(git rev-parse --show-toplevel)/Documentation/tmp-doc-diff" || exit 1 + +if test -n "$clean" +then + test $# -eq 0 || usage + git worktree remove --force "$tmp/worktree" 2>/dev/null + rm -rf "$tmp" + exit 0 +fi + if test -z "$parallel" then parallel=$(getconf _NPROCESSORS_ONLN 2>/dev/null) @@ -42,9 +91,6 @@ to=$1; shift from_oid=$(git rev-parse --verify "$from") || exit 1 to_oid=$(git rev-parse --verify "$to") || exit 1 -cd_to_toplevel -tmp=Documentation/tmp-doc-diff - if test -n "$force" then rm -rf "$tmp" @@ -54,27 +100,43 @@ fi # results that don't differ between the two trees. if ! test -d "$tmp/worktree" then - git worktree add --detach "$tmp/worktree" "$from" && + git worktree add -f --detach "$tmp/worktree" "$from" && dots=$(echo "$tmp/worktree" | sed 's#[^/]*#..#g') && ln -s "$dots/config.mak" "$tmp/worktree/config.mak" fi +construct_makemanflags () { + if test "$1" = "-asciidoc" + then + echo USE_ASCIIDOCTOR= + elif test "$1" = "-asciidoctor" + then + echo USE_ASCIIDOCTOR=YesPlease + fi +} + +from_makemanflags=$(construct_makemanflags "$from_program") && +to_makemanflags=$(construct_makemanflags "$to_program") && + +from_dir=$from_oid$from_program$cut_footer && +to_dir=$to_oid$to_program$cut_footer && + # generate_render_makefile <srcdir> <dstdir> generate_render_makefile () { find "$1" -type f | while read src do dst=$2/${src#$1/} - printf 'all:: %s\n' "$dst" + printf 'all: %s\n' "$dst" printf '%s: %s\n' "$dst" "$src" printf '\t@echo >&2 " RENDER $(notdir $@)" && \\\n' printf '\tmkdir -p $(dir $@) && \\\n' - printf '\tMANWIDTH=80 man -l $< >$@+ && \\\n' + printf '\tMANWIDTH=80 man $< >$@+ && \\\n' printf '\tmv $@+ $@\n' done } -# render_tree <dirname> <committish> +# render_tree <committish_oid> <directory_name> <makemanflags> render_tree () { # Skip install-man entirely if we already have an installed directory. # We can't rely on make here, since "install-man" unconditionally @@ -82,28 +144,43 @@ render_tree () { # we then can't rely on during the render step). We use "mv" to make # sure we don't get confused by a previous run that failed partway # through. - if ! test -d "$tmp/installed/$1" + oid=$1 && + dname=$2 && + makemanflags=$3 && + if ! test -d "$tmp/installed/$dname" then - git -C "$tmp/worktree" checkout "$2" && + git -C "$tmp/worktree" checkout --detach "$oid" && make -j$parallel -C "$tmp/worktree" \ + $makemanflags \ GIT_VERSION=omitted \ SOURCE_DATE_EPOCH=0 \ - DESTDIR="$PWD/$tmp/installed/$1+" \ + DESTDIR="$tmp/installed/$dname+" \ install-man && - mv "$tmp/installed/$1+" "$tmp/installed/$1" + mv "$tmp/installed/$dname+" "$tmp/installed/$dname" fi && # As with "installed" above, we skip the render if it's already been # done. So using make here is primarily just about running in # parallel. - if ! test -d "$tmp/rendered/$1" + if ! test -d "$tmp/rendered/$dname" then - generate_render_makefile "$tmp/installed/$1" "$tmp/rendered/$1+" | + generate_render_makefile "$tmp/installed/$dname" \ + "$tmp/rendered/$dname+" | make -j$parallel -f - && - mv "$tmp/rendered/$1+" "$tmp/rendered/$1" + mv "$tmp/rendered/$dname+" "$tmp/rendered/$dname" + + if test "$cut_footer" = "-cut-footer" + then + for f in $(find "$tmp/rendered/$dname" -type f) + do + head -n -2 "$f" | sed -e '${/^$/d}' >"$f+" && + mv "$f+" "$f" || + return 1 + done + fi fi } -render_tree $from_oid "$from" && -render_tree $to_oid "$to" && -git -C $tmp/rendered diff --no-index "$@" $from_oid $to_oid +render_tree $from_oid $from_dir $from_makemanflags && +render_tree $to_oid $to_dir $to_makemanflags && +git -C $tmp/rendered diff --no-index "$@" $from_dir $to_dir |