diff options
Diffstat (limited to 'Documentation/diff-options.txt')
| -rw-r--r-- | Documentation/diff-options.txt | 525 |
1 files changed, 503 insertions, 22 deletions
diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index b28496e5c8..bbed2cd79c 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -1,53 +1,534 @@ +// Please don't remove this comment as asciidoc behaves badly when +// the first non-empty line is ifdef/ifndef. The symptom is that +// without this comment the <git-diff-core> attribute conditionally +// defined below ends up being defined unconditionally. +// Last checked with asciidoc 7.0.2. + +ifndef::git-format-patch[] +ifndef::git-diff[] +ifndef::git-log[] +:git-diff-core: 1 +endif::git-log[] +endif::git-diff[] +endif::git-format-patch[] + +ifdef::git-format-patch[] -p:: - Generate patch (see section on generating patches) +--no-stat:: + Generate plain patches without any diffstats. +endif::git-format-patch[] +ifndef::git-format-patch[] +-p:: -u:: - Synonym for "-p". +--patch:: + Generate patch (see section on generating patches). + {git-diff? This is the default.} +endif::git-format-patch[] + +-s:: +--no-patch:: + Suppress diff output. Useful for commands like `git show` that + show the patch by default, or to cancel the effect of `--patch`. + +-U<n>:: +--unified=<n>:: + Generate diffs with <n> lines of context instead of + the usual three. +ifndef::git-format-patch[] + Implies `-p`. +endif::git-format-patch[] + +ifndef::git-format-patch[] +--raw:: + Generate the raw format. + {git-diff-core? This is the default.} +endif::git-format-patch[] + +ifndef::git-format-patch[] +--patch-with-raw:: + Synonym for `-p --raw`. +endif::git-format-patch[] + +--minimal:: + Spend extra time to make sure the smallest possible + diff is produced. + +--patience:: + Generate a diff using the "patience diff" algorithm. + +--histogram:: + Generate a diff using the "histogram diff" algorithm. + +--diff-algorithm={patience|minimal|histogram|myers}:: + Choose a diff algorithm. The variants are as follows: ++ +-- +`default`, `myers`;; + The basic greedy diff algorithm. Currently, this is the default. +`minimal`;; + Spend extra time to make sure the smallest possible diff is + produced. +`patience`;; + Use "patience diff" algorithm when generating patches. +`histogram`;; + This algorithm extends the patience algorithm to "support + low-occurrence common elements". +-- ++ +For instance, if you configured diff.algorithm variable to a +non-default value and want to use the default one, then you +have to use `--diff-algorithm=default` option. + +--stat[=<width>[,<name-width>[,<count>]]]:: + Generate a diffstat. By default, as much space as necessary + will be used for the filename part, and the rest for the graph + part. Maximum width defaults to terminal width, or 80 columns + if not connected to a terminal, and can be overridden by + `<width>`. The width of the filename part can be limited by + giving another width `<name-width>` after a comma. The width + of the graph part can be limited by using + `--stat-graph-width=<width>` (affects all commands generating + a stat graph) or by setting `diff.statGraphWidth=<width>` + (does not affect `git format-patch`). + By giving a third parameter `<count>`, you can limit the + output to the first `<count>` lines, followed by `...` if + there are more. ++ +These parameters can also be set individually with `--stat-width=<width>`, +`--stat-name-width=<name-width>` and `--stat-count=<count>`. + +--numstat:: + Similar to `--stat`, but shows number of added and + deleted lines in decimal notation and pathname without + abbreviation, to make it more machine friendly. For + binary files, outputs two `-` instead of saying + `0 0`. --r:: - Look recursively in subdirectories; this flag does not - mean anything to commands other than "git-diff-tree"; - other diff commands always look at all the subdirectories. +--shortstat:: + Output only the last line of the `--stat` format containing total + number of modified files, as well as number of added and deleted + lines. + +--dirstat[=<param1,param2,...>]:: + Output the distribution of relative amount of changes for each + sub-directory. The behavior of `--dirstat` can be customized by + passing it a comma separated list of parameters. + The defaults are controlled by the `diff.dirstat` configuration + variable (see linkgit:git-config[1]). + The following parameters are available: ++ +-- +`changes`;; + Compute the dirstat numbers by counting the lines that have been + removed from the source, or added to the destination. This ignores + the amount of pure code movements within a file. In other words, + rearranging lines in a file is not counted as much as other changes. + This is the default behavior when no parameter is given. +`lines`;; + Compute the dirstat numbers by doing the regular line-based diff + analysis, and summing the removed/added line counts. (For binary + files, count 64-byte chunks instead, since binary files have no + natural concept of lines). This is a more expensive `--dirstat` + behavior than the `changes` behavior, but it does count rearranged + lines within a file as much as other changes. The resulting output + is consistent with what you get from the other `--*stat` options. +`files`;; + Compute the dirstat numbers by counting the number of files changed. + Each changed file counts equally in the dirstat analysis. This is + the computationally cheapest `--dirstat` behavior, since it does + not have to look at the file contents at all. +`cumulative`;; + Count changes in a child directory for the parent directory as well. + Note that when using `cumulative`, the sum of the percentages + reported may exceed 100%. The default (non-cumulative) behavior can + be specified with the `noncumulative` parameter. +<limit>;; + An integer parameter specifies a cut-off percent (3% by default). + Directories contributing less than this percentage of the changes + are not shown in the output. +-- ++ +Example: The following will count changed files, while ignoring +directories with less than 10% of the total amount of changed files, +and accumulating child directory counts in the parent directories: +`--dirstat=files,10,cumulative`. + +--summary:: + Output a condensed summary of extended header information + such as creations, renames and mode changes. + +ifndef::git-format-patch[] +--patch-with-stat:: + Synonym for `-p --stat`. +endif::git-format-patch[] + +ifndef::git-format-patch[] -z:: - \0 line termination on output +ifdef::git-log[] + Separate the commits with NULs instead of with new newlines. ++ +Also, when `--raw` or `--numstat` has been given, do not munge +pathnames and use NULs as output field terminators. +endif::git-log[] +ifndef::git-log[] + When `--raw`, `--numstat`, `--name-only` or `--name-status` has been + given, do not munge pathnames and use NULs as output field terminators. +endif::git-log[] ++ +Without this option, each pathname output will have TAB, LF, double quotes, +and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, +respectively, and the pathname will be enclosed in double quotes if +any of those replacements occurred. --name-only:: Show only names of changed files. ---name-only-z:: - Same as --name-only, but terminate lines with NUL. +--name-status:: + Show only names and status of changed files. See the description + of the `--diff-filter` option on what the status letters mean. + +--submodule[=<format>]:: + Specify how differences in submodules are shown. When `--submodule` + or `--submodule=log` is given, the 'log' format is used. This format lists + the commits in the range like linkgit:git-submodule[1] `summary` does. + Omitting the `--submodule` option or specifying `--submodule=short`, + uses the 'short' format. This format just shows the names of the commits + at the beginning and end of the range. Can be tweaked via the + `diff.submodule` configuration variable. + +--color[=<when>]:: + Show colored diff. + `--color` (i.e. without '=<when>') is the same as `--color=always`. + '<when>' can be one of `always`, `never`, or `auto`. +ifdef::git-diff[] + It can be changed by the `color.ui` and `color.diff` + configuration settings. +endif::git-diff[] + +--no-color:: + Turn off colored diff. +ifdef::git-diff[] + This can be used to override configuration settings. +endif::git-diff[] + It is the same as `--color=never`. + +--word-diff[=<mode>]:: + Show a word diff, using the <mode> to delimit changed words. + By default, words are delimited by whitespace; see + `--word-diff-regex` below. The <mode> defaults to 'plain', and + must be one of: ++ +-- +color:: + Highlight changed words using only colors. Implies `--color`. +plain:: + Show words as `[-removed-]` and `{+added+}`. Makes no + attempts to escape the delimiters if they appear in the input, + so the output may be ambiguous. +porcelain:: + Use a special line-based format intended for script + consumption. Added/removed/unchanged runs are printed in the + usual unified diff format, starting with a `+`/`-`/` ` + character at the beginning of the line and extending to the + end of the line. Newlines in the input are represented by a + tilde `~` on a line of its own. +none:: + Disable word diff again. +-- ++ +Note that despite the name of the first mode, color is used to +highlight the changed parts in all modes if enabled. + +--word-diff-regex=<regex>:: + Use <regex> to decide what a word is, instead of considering + runs of non-whitespace to be a word. Also implies + `--word-diff` unless it was already enabled. ++ +Every non-overlapping match of the +<regex> is considered a word. Anything between these matches is +considered whitespace and ignored(!) for the purposes of finding +differences. You may want to append `|[^[:space:]]` to your regular +expression to make sure that it matches all non-whitespace characters. +A match that contains a newline is silently truncated(!) at the +newline. ++ +The regex can also be set via a diff driver or configuration option, see +linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly +overrides any diff driver or configuration setting. Diff drivers +override configuration settings. + +--color-words[=<regex>]:: + Equivalent to `--word-diff=color` plus (if a regex was + specified) `--word-diff-regex=<regex>`. +endif::git-format-patch[] + +--no-renames:: + Turn off rename detection, even when the configuration + file gives the default to do so. + +ifndef::git-format-patch[] +--check:: + Warn if changes introduce whitespace errors. What are + considered whitespace errors is controlled by `core.whitespace` + configuration. By default, trailing whitespaces (including + lines that solely consist of whitespaces) and a space character + that is immediately followed by a tab character inside the + initial indent of the line are considered whitespace errors. + Exits with non-zero status if problems are found. Not compatible + with --exit-code. +endif::git-format-patch[] --B:: - Break complete rewrite changes into pairs of delete and create. +--full-index:: + Instead of the first handful of characters, show the full + pre- and post-image blob object names on the "index" + line when generating patch format output. --M:: +--binary:: + In addition to `--full-index`, output a binary diff that + can be applied with `git-apply`. + +--abbrev[=<n>]:: + Instead of showing the full 40-byte hexadecimal object + name in diff-raw format output and diff-tree header + lines, show only a partial prefix. This is + independent of the `--full-index` option above, which controls + the diff-patch output format. Non default number of + digits can be specified with `--abbrev=<n>`. + +-B[<n>][/<m>]:: +--break-rewrites[=[<n>][/<m>]]:: + Break complete rewrite changes into pairs of delete and + create. This serves two purposes: ++ +It affects the way a change that amounts to a total rewrite of a file +not as a series of deletion and insertion mixed together with a very +few lines that happen to match textually as the context, but as a +single deletion of everything old followed by a single insertion of +everything new, and the number `m` controls this aspect of the -B +option (defaults to 60%). `-B/70%` specifies that less than 30% of the +original should remain in the result for Git to consider it a total +rewrite (i.e. otherwise the resulting patch will be a series of +deletion and insertion mixed together with context lines). ++ +When used with -M, a totally-rewritten file is also considered as the +source of a rename (usually -M only considers a file that disappeared +as the source of a rename), and the number `n` controls this aspect of +the -B option (defaults to 50%). `-B20%` specifies that a change with +addition and deletion compared to 20% or more of the file's size are +eligible for being picked up as a possible source of a rename to +another file. + +-M[<n>]:: +--find-renames[=<n>]:: +ifndef::git-log[] Detect renames. +endif::git-log[] +ifdef::git-log[] + If generating diffs, detect and report renames for each commit. + For following files across renames while traversing history, see + `--follow`. +endif::git-log[] + If `n` is specified, it is a threshold on the similarity + index (i.e. amount of addition/deletions compared to the + file's size). For example, `-M90%` means Git should consider a + delete/add pair to be a rename if more than 90% of the file + hasn't changed. Without a `%` sign, the number is to be read as + a fraction, with a decimal point before it. I.e., `-M5` becomes + 0.5, and is thus the same as `-M50%`. Similarly, `-M05` is + the same as `-M5%`. To limit detection to exact renames, use + `-M100%`. The default similarity index is 50%. --C:: - Detect copies as well as renames. +-C[<n>]:: +--find-copies[=<n>]:: + Detect copies as well as renames. See also `--find-copies-harder`. + If `n` is specified, it has the same meaning as for `-M<n>`. --find-copies-harder:: - By default, -C option finds copies only if the original - file of the copy was modified in the same changeset for - performance reasons. This flag makes the command + For performance reasons, by default, `-C` option finds copies only + if the original file of the copy was modified in the same + changeset. This flag makes the command inspect unmodified files as candidates for the source of copy. This is a very expensive operation for large - projects, so use it with caution. + projects, so use it with caution. Giving more than one + `-C` option has the same effect. + +-D:: +--irreversible-delete:: + Omit the preimage for deletes, i.e. print only the header but not + the diff between the preimage and `/dev/null`. The resulting patch + is not meant to be applied with `patch` nor `git apply`; this is + solely for people who want to just concentrate on reviewing the + text after the change. In addition, the output obviously lack + enough information to apply such a patch in reverse, even manually, + hence the name of the option. ++ +When used together with `-B`, omit also the preimage in the deletion part +of a delete/create pair. + +-l<num>:: + The `-M` and `-C` options require O(n^2) processing time where n + is the number of potential rename/copy targets. This + option prevents rename/copy detection from running if + the number of rename/copy targets exceeds the specified + number. + +ifndef::git-format-patch[] +--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: + Select only files that are Added (`A`), Copied (`C`), + Deleted (`D`), Modified (`M`), Renamed (`R`), have their + type (i.e. regular file, symlink, submodule, ...) changed (`T`), + are Unmerged (`U`), are + Unknown (`X`), or have had their pairing Broken (`B`). + Any combination of the filter characters (including none) can be used. + When `*` (All-or-none) is added to the combination, all + paths are selected if there is any file that matches + other criteria in the comparison; if there is no file + that matches other criteria, nothing is selected. -S<string>:: - Look for differences that contains the change in <string>. + Look for differences that change the number of occurrences of + the specified string (i.e. addition/deletion) in a file. + Intended for the scripter's use. ++ +It is useful when you're looking for an exact block of code (like a +struct), and want to know the history of that block since it first +came into being: use the feature iteratively to feed the interesting +block in the preimage back into `-S`, and keep going until you get the +very first version of the block. + +-G<regex>:: + Look for differences whose patch text contains added/removed + lines that match <regex>. ++ +To illustrate the difference between `-S<regex> --pickaxe-regex` and +`-G<regex>`, consider a commit with the following diff in the same +file: ++ +---- ++ return !regexec(regexp, two->ptr, 1, ®match, 0); +... +- hit = !regexec(regexp, mf2.ptr, 1, ®match, 0); +---- ++ +While `git log -G"regexec\(regexp"` will show this commit, `git log +-S"regexec\(regexp" --pickaxe-regex` will not (because the number of +occurrences of that string did not change). ++ +See the 'pickaxe' entry in linkgit:gitdiffcore[7] for more +information. --pickaxe-all:: - When -S finds a change, show all the changes in that - changeset, not just the files that contains the change + When `-S` or `-G` finds a change, show all the changes in that + changeset, not just the files that contain the change in <string>. +--pickaxe-regex:: + Treat the <string> given to `-S` as an extended POSIX regular + expression to match. +endif::git-format-patch[] + -O<orderfile>:: Output the patch in the order specified in the <orderfile>, which has one shell glob pattern per line. +ifndef::git-format-patch[] -R:: - Swap two inputs; that is, show differences from cache or + Swap two inputs; that is, show differences from index or on-disk file to tree contents. +--relative[=<path>]:: + When run from a subdirectory of the project, it can be + told to exclude changes outside the directory and show + pathnames relative to it with this option. When you are + not in a subdirectory (e.g. in a bare repository), you + can name which subdirectory to make the output relative + to by giving a <path> as an argument. +endif::git-format-patch[] + +-a:: +--text:: + Treat all files as text. + +--ignore-space-at-eol:: + Ignore changes in whitespace at EOL. + +-b:: +--ignore-space-change:: + Ignore changes in amount of whitespace. This ignores whitespace + at line end, and considers all other sequences of one or + more whitespace characters to be equivalent. + +-w:: +--ignore-all-space:: + Ignore whitespace when comparing lines. This ignores + differences even if one line has whitespace where the other + line has none. + +--ignore-blank-lines:: + Ignore changes whose lines are all blank. + +--inter-hunk-context=<lines>:: + Show the context between diff hunks, up to the specified number + of lines, thereby fusing hunks that are close to each other. + +-W:: +--function-context:: + Show whole surrounding functions of changes. + +ifndef::git-format-patch[] +ifndef::git-log[] +--exit-code:: + Make the program exit with codes similar to diff(1). + That is, it exits with 1 if there were differences and + 0 means no differences. + +--quiet:: + Disable all output of the program. Implies `--exit-code`. +endif::git-log[] +endif::git-format-patch[] + +--ext-diff:: + Allow an external diff helper to be executed. If you set an + external diff driver with linkgit:gitattributes[5], you need + to use this option with linkgit:git-log[1] and friends. + +--no-ext-diff:: + Disallow external diff drivers. + +--textconv:: +--no-textconv:: + Allow (or disallow) external text conversion filters to be run + when comparing binary files. See linkgit:gitattributes[5] for + details. Because textconv filters are typically a one-way + conversion, the resulting diff is suitable for human + consumption, but cannot be applied. For this reason, textconv + filters are enabled by default only for linkgit:git-diff[1] and + linkgit:git-log[1], but not for linkgit:git-format-patch[1] or + diff plumbing commands. + +--ignore-submodules[=<when>]:: + Ignore changes to submodules in the diff generation. <when> can be + either "none", "untracked", "dirty" or "all", which is the default. + Using "none" will consider the submodule modified when it either contains + untracked or modified files or its HEAD differs from the commit recorded + in the superproject and can be used to override any settings of the + 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When + "untracked" is used submodules are not considered dirty when they only + contain untracked content (but they are still scanned for modified + content). Using "dirty" ignores all changes to the work tree of submodules, + only changes to the commits stored in the superproject are shown (this was + the behavior until 1.7.0). Using "all" hides all changes to submodules. + +--src-prefix=<prefix>:: + Show the given source prefix instead of "a/". + +--dst-prefix=<prefix>:: + Show the given destination prefix instead of "b/". + +--no-prefix:: + Do not show any source or destination prefix. + +For more detailed explanation on these common options, see also +linkgit:gitdiffcore[7]. |