summaryrefslogtreecommitdiff
path: root/Documentation/diff-options.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/diff-options.txt')
-rw-r--r--Documentation/diff-options.txt83
1 files changed, 62 insertions, 21 deletions
diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt
index 9276faeb11..8707d0e740 100644
--- a/Documentation/diff-options.txt
+++ b/Documentation/diff-options.txt
@@ -14,7 +14,8 @@ endif::git-format-patch[]
ifdef::git-format-patch[]
-p::
- Generate patches without diffstat.
+--no-stat::
+ Generate plain patches without any diffstats.
endif::git-format-patch[]
ifndef::git-format-patch[]
@@ -27,33 +28,40 @@ endif::git-format-patch[]
-U<n>::
--unified=<n>::
Generate diffs with <n> lines of context instead of
- the usual three. Implies "-p".
+ the usual three.
+ifndef::git-format-patch[]
+ Implies `-p`.
+endif::git-format-patch[]
+ifndef::git-format-patch[]
--raw::
Generate the raw format.
{git-diff-core? This is the default.}
+endif::git-format-patch[]
+ifndef::git-format-patch[]
--patch-with-raw::
- Synonym for "-p --raw".
+ Synonym for `-p --raw`.
+endif::git-format-patch[]
--patience::
Generate a diff using the "patience diff" algorithm.
--stat[=width[,name-width]]::
Generate a diffstat. You can override the default
- output width for 80-column terminal by "--stat=width".
+ output width for 80-column terminal by `--stat=width`.
The width of the filename part can be controlled by
giving another width to it separated by a comma.
--numstat::
- Similar to \--stat, but shows number of added and
+ Similar to `\--stat`, but shows number of added and
deleted lines in decimal notation and pathname without
abbreviation, to make it more machine friendly. For
binary files, outputs two `-` instead of saying
`0 0`.
--shortstat::
- Output only the last line of the --stat format containing total
+ Output only the last line of the `--stat` format containing total
number of modified files, as well as number of added and deleted
lines.
@@ -61,24 +69,39 @@ endif::git-format-patch[]
Output the distribution of relative amount of changes (number of lines added or
removed) for each sub-directory. Directories with changes below
a cut-off percent (3% by default) are not shown. The cut-off percent
- can be set with "--dirstat=limit". Changes in a child directory is not
- counted for the parent directory, unless "--cumulative" is used.
+ can be set with `--dirstat=limit`. Changes in a child directory is not
+ counted for the parent directory, unless `--cumulative` is used.
--dirstat-by-file[=limit]::
- Same as --dirstat, but counts changed files instead of lines.
+ Same as `--dirstat`, but counts changed files instead of lines.
--summary::
Output a condensed summary of extended header information
such as creations, renames and mode changes.
+ifndef::git-format-patch[]
--patch-with-stat::
- Synonym for "-p --stat".
- {git-format-patch? This is the default.}
+ Synonym for `-p --stat`.
+endif::git-format-patch[]
+
+ifndef::git-format-patch[]
-z::
- NUL-line termination on output. This affects the --raw
- output field terminator. Also output from commands such
- as "git-log" will be delimited with NUL between commits.
+ifdef::git-log[]
+ Separate the commits with NULs instead of with new newlines.
++
+Also, when `--raw` or `--numstat` has been given, do not munge
+pathnames and use NULs as output field terminators.
+endif::git-log[]
+ifndef::git-log[]
+ When `--raw` or `--numstat` has been given, do not munge
+ pathnames and use NULs as output field terminators.
+endif::git-log[]
++
+Without this option, each pathname output will have TAB, LF, double quotes,
+and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`,
+respectively, and the pathname will be enclosed in double quotes if
+any of those replacements occurred.
--name-only::
Show only names of changed files.
@@ -87,6 +110,13 @@ endif::git-format-patch[]
Show only names and status of changed files. See the description
of the `--diff-filter` option on what the status letters mean.
+--submodule[=<format>]::
+ Chose the output format for submodule differences. <format> can be one of
+ 'short' and 'log'. 'short' just shows pairs of commit names, this format
+ is used when this option is not given. 'log' is the default value for this
+ option and lists the commits in that commit range like the 'summary'
+ option of linkgit:git-submodule[1] does.
+
--color::
Show colored diff.
@@ -110,16 +140,19 @@ The regex can also be set via a diff driver or configuration option, see
linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly
overrides any diff driver or configuration setting. Diff drivers
override configuration settings.
+endif::git-format-patch[]
--no-renames::
Turn off rename detection, even when the configuration
file gives the default to do so.
+ifndef::git-format-patch[]
--check::
Warn if changes introduce trailing whitespace
or an indent that uses a space before a tab. Exits with
non-zero status if problems are found. Not compatible with
--exit-code.
+endif::git-format-patch[]
--full-index::
Instead of the first handful of characters, show the full
@@ -127,16 +160,16 @@ override configuration settings.
line when generating patch format output.
--binary::
- In addition to --full-index, output "binary diff" that
- can be applied with "git apply".
+ In addition to `--full-index`, output a binary diff that
+ can be applied with `git-apply`.
--abbrev[=<n>]::
Instead of showing the full 40-byte hexadecimal object
name in diff-raw format output and diff-tree header
lines, show only a partial prefix. This is
- independent of --full-index option above, which controls
+ independent of the `--full-index` option above, which controls
the diff-patch output format. Non default number of
- digits can be specified with --abbrev=<n>.
+ digits can be specified with `--abbrev=<n>`.
-B::
Break complete rewrite changes into pairs of delete and create.
@@ -147,6 +180,7 @@ override configuration settings.
-C::
Detect copies as well as renames. See also `--find-copies-harder`.
+ifndef::git-format-patch[]
--diff-filter=[ACDMRTUXB*]::
Select only files that are Added (`A`), Copied (`C`),
Deleted (`D`), Modified (`M`), Renamed (`R`), have their
@@ -158,6 +192,7 @@ override configuration settings.
paths are selected if there is any file that matches
other criteria in the comparison; if there is no file
that matches other criteria, nothing is selected.
+endif::git-format-patch[]
--find-copies-harder::
For performance reasons, by default, `-C` option finds copies only
@@ -169,12 +204,13 @@ override configuration settings.
`-C` option has the same effect.
-l<num>::
- -M and -C options require O(n^2) processing time where n
+ The `-M` and `-C` options require O(n^2) processing time where n
is the number of potential rename/copy targets. This
option prevents rename/copy detection from running if
the number of rename/copy targets exceeds the specified
number.
+ifndef::git-format-patch[]
-S<string>::
Look for differences that introduce or remove an instance of
<string>. Note that this is different than the string simply
@@ -182,18 +218,20 @@ override configuration settings.
linkgit:gitdiffcore[7] for more details.
--pickaxe-all::
- When -S finds a change, show all the changes in that
+ When `-S` finds a change, show all the changes in that
changeset, not just the files that contain the change
in <string>.
--pickaxe-regex::
Make the <string> not a plain string but an extended POSIX
regex to match.
+endif::git-format-patch[]
-O<orderfile>::
Output the patch in the order specified in the
<orderfile>, which has one shell glob pattern per line.
+ifndef::git-format-patch[]
-R::
Swap two inputs; that is, show differences from index or
on-disk file to tree contents.
@@ -205,6 +243,7 @@ override configuration settings.
not in a subdirectory (e.g. in a bare repository), you
can name which subdirectory to make the output relative
to by giving a <path> as an argument.
+endif::git-format-patch[]
-a::
--text::
@@ -229,13 +268,15 @@ override configuration settings.
Show the context between diff hunks, up to the specified number
of lines, thereby fusing hunks that are close to each other.
+ifndef::git-format-patch[]
--exit-code::
Make the program exit with codes similar to diff(1).
That is, it exits with 1 if there were differences and
0 means no differences.
--quiet::
- Disable all output of the program. Implies --exit-code.
+ Disable all output of the program. Implies `--exit-code`.
+endif::git-format-patch[]
--ext-diff::
Allow an external diff helper to be executed. If you set an