diff options
Diffstat (limited to 'Documentation/config')
26 files changed, 301 insertions, 84 deletions
diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index 57fcd4c862..6aaa360202 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -4,6 +4,10 @@ advice.*:: can tell Git that you do not need help by setting these to 'false': + -- + fetchShowForcedUpdates:: + Advice shown when linkgit:git-fetch[1] takes a long time + to calculate forced updates after ref updates, or to warn + that the check is disabled. pushUpdateRejected:: Set this variable to 'false' if you want to disable 'pushNonFFCurrent', @@ -30,12 +34,26 @@ advice.*:: tries to overwrite a remote ref that points at an object that is not a commit-ish, or make the remote ref point at an object that is not a commit-ish. + pushUnqualifiedRefname:: + Shown when linkgit:git-push[1] gives up trying to + guess based on the source and destination refs what + remote ref namespace the source belongs in, but where + we can still suggest that the user push to either + refs/heads/* or refs/tags/* based on the type of the + source object. + statusAheadBehind:: + Shown when linkgit:git-status[1] computes the ahead/behind + counts for a local ref compared to its remote tracking ref, + and that calculation takes longer than expected. Will not + appear if `status.aheadBehind` is false or the option + `--no-ahead-behind` is given. statusHints:: Show directions on how to proceed from the current state in the output of linkgit:git-status[1], in the template shown when writing commit messages in linkgit:git-commit[1], and in the help message shown - by linkgit:git-checkout[1] when switching branch. + by linkgit:git-switch[1] or + linkgit:git-checkout[1] when switching branch. statusUoption:: Advise to consider using the `-u` option to linkgit:git-status[1] when the command takes more than 2 seconds to enumerate untracked @@ -50,17 +68,21 @@ advice.*:: resolveConflict:: Advice shown by various commands when conflicts prevent the operation from being performed. + sequencerInUse:: + Advice shown when a sequencer command is already in progress. implicitIdentity:: Advice on how to set your identity configuration when your information is guessed from the system username and domain name. detachedHead:: - Advice shown when you used linkgit:git-checkout[1] to - move to the detach HEAD state, to instruct how to create - a local branch after the fact. + Advice shown when you used + linkgit:git-switch[1] or linkgit:git-checkout[1] + to move to the detach HEAD state, to instruct how to + create a local branch after the fact. checkoutAmbiguousRemoteBranchName:: Advice shown when the argument to - linkgit:git-checkout[1] ambiguously resolves to a + linkgit:git-checkout[1] and linkgit:git-switch[1] + ambiguously resolves to a remote tracking branch on more than one remote in situations where an unambiguous argument would have otherwise caused a remote-tracking branch to be @@ -83,4 +105,6 @@ advice.*:: waitingForEditor:: Print a message to the terminal whenever Git is waiting for editor input from the user. + nestedTag:: + Advice shown if a user attempts to recursively tag a tag object. -- diff --git a/Documentation/config/alias.txt b/Documentation/config/alias.txt index 0b14178314..f1ca739d57 100644 --- a/Documentation/config/alias.txt +++ b/Documentation/config/alias.txt @@ -1,18 +1,28 @@ alias.*:: Command aliases for the linkgit:git[1] command wrapper - e.g. - after defining "alias.last = cat-file commit HEAD", the invocation - "git last" is equivalent to "git cat-file commit HEAD". To avoid + after defining `alias.last = cat-file commit HEAD`, the invocation + `git last` is equivalent to `git cat-file commit HEAD`. To avoid confusion and troubles with script usage, aliases that hide existing Git commands are ignored. Arguments are split by spaces, the usual shell quoting and escaping is supported. A quote pair or a backslash can be used to quote them. + +Note that the first word of an alias does not necessarily have to be a +command. It can be a command-line option that will be passed into the +invocation of `git`. In particular, this is useful when used with `-c` +to pass in one-time configurations or `-p` to force pagination. For example, +`loud-rebase = -c commit.verbose=true rebase` can be defined such that +running `git loud-rebase` would be equivalent to +`git -c commit.verbose=true rebase`. Also, `ps = -p status` would be a +helpful alias since `git ps` would paginate the output of `git status` +where the original command does not. ++ If the alias expansion is prefixed with an exclamation point, it will be treated as a shell command. For example, defining -"alias.new = !gitk --all --not ORIG_HEAD", the invocation -"git new" is equivalent to running the shell command -"gitk --all --not ORIG_HEAD". Note that shell commands will be +`alias.new = !gitk --all --not ORIG_HEAD`, the invocation +`git new` is equivalent to running the shell command +`gitk --all --not ORIG_HEAD`. Note that shell commands will be executed from the top-level directory of a repository, which may not necessarily be the current directory. -`GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix' +`GIT_PREFIX` is set as returned by running `git rev-parse --show-prefix` from the original current directory. See linkgit:git-rev-parse[1]. diff --git a/Documentation/config/blame.txt b/Documentation/config/blame.txt index 67b5c1d1e0..9468e8599c 100644 --- a/Documentation/config/blame.txt +++ b/Documentation/config/blame.txt @@ -19,3 +19,19 @@ blame.showEmail:: blame.showRoot:: Do not treat root commits as boundaries in linkgit:git-blame[1]. This option defaults to false. + +blame.ignoreRevsFile:: + Ignore revisions listed in the file, one unabbreviated object name per + line, in linkgit:git-blame[1]. Whitespace and comments beginning with + `#` are ignored. This option may be repeated multiple times. Empty + file names will reset the list of ignored revisions. This option will + be handled before the command line option `--ignore-revs-file`. + +blame.markUnblamables:: + Mark lines that were changed by an ignored revision that we could not + attribute to another commit with a '*' in the output of + linkgit:git-blame[1]. + +blame.markIgnoredLines:: + Mark lines that were changed by an ignored revision that we attributed to + another commit with a '?' in the output of linkgit:git-blame[1]. diff --git a/Documentation/config/branch.txt b/Documentation/config/branch.txt index 019d60ede2..a592d522a7 100644 --- a/Documentation/config/branch.txt +++ b/Documentation/config/branch.txt @@ -1,5 +1,5 @@ branch.autoSetupMerge:: - Tells 'git branch' and 'git checkout' to set up new branches + Tells 'git branch', 'git switch' and 'git checkout' to set up new branches so that linkgit:git-pull[1] will appropriately merge from the starting point branch. Note that even if this option is not set, this behavior can be chosen per-branch using the `--track` @@ -11,7 +11,7 @@ branch.autoSetupMerge:: branch. This option defaults to true. branch.autoSetupRebase:: - When a new branch is created with 'git branch' or 'git checkout' + When a new branch is created with 'git branch', 'git switch' or 'git checkout' that tracks another branch, this variable tells Git to set up pull to rebase instead of merge (see "branch.<name>.rebase"). When `never`, rebase is never automatically set to true. @@ -85,9 +85,9 @@ When `merges`, pass the `--rebase-merges` option to 'git rebase' so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When preserve, also pass `--preserve-merges` along to 'git rebase' -so that locally committed merge commits will not be flattened -by running 'git pull'. +When `preserve` (deprecated in favor of `merges`), also pass +`--preserve-merges` along to 'git rebase' so that locally committed merge +commits will not be flattened by running 'git pull'. + When the value is `interactive`, the rebase is run in interactive mode. + diff --git a/Documentation/config/checkout.txt b/Documentation/config/checkout.txt index c4118fa196..6b646813ab 100644 --- a/Documentation/config/checkout.txt +++ b/Documentation/config/checkout.txt @@ -1,5 +1,6 @@ checkout.defaultRemote:: - When you run 'git checkout <something>' and only have one + When you run 'git checkout <something>' + or 'git switch <something>' and only have one remote, it may implicitly fall back on checking out and tracking e.g. 'origin/<something>'. This stops working as soon as you have more than one remote with a '<something>' @@ -8,16 +9,10 @@ checkout.defaultRemote:: disambiguation. The typical use-case is to set this to `origin`. + -Currently this is used by linkgit:git-checkout[1] when 'git checkout -<something>' will checkout the '<something>' branch on another remote, +Currently this is used by linkgit:git-switch[1] and +linkgit:git-checkout[1] when 'git checkout <something>' +or 'git switch <something>' +will checkout the '<something>' branch on another remote, and by linkgit:git-worktree[1] when 'git worktree add' refers to a remote branch. This setting might be used for other checkout-like commands or functionality in the future. - -checkout.optimizeNewBranch:: - Optimizes the performance of "git checkout -b <new_branch>" when - using sparse-checkout. When set to true, git will not update the - repo based on the current sparse-checkout settings. This means it - will not update the skip-worktree bit in the index nor add/remove - files in the working directory to reflect the current sparse checkout - settings nor will it show the local changes. diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index d0e6635fe0..75538d27e7 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -121,11 +121,14 @@ core.quotePath:: core.eol:: Sets the line ending type to use in the working directory for - files that have the `text` property set when core.autocrlf is false. + files that are marked as text (either by having the `text` + attribute set, or by having `text=auto` and Git auto-detecting + the contents as text). Alternatives are 'lf', 'crlf' and 'native', which uses the platform's native line ending. The default value is `native`. See linkgit:gitattributes[5] for more information on end-of-line - conversion. + conversion. Note that this value is ignored if `core.autocrlf` + is set to `true` or `input`. core.safecrlf:: If true, makes Git check if converting `CRLF` is reversible when @@ -411,7 +414,7 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesFile:: Specifies the pathname to the file that contains patterns to describe paths that are not meant to be tracked, in addition - to '.gitignore' (per-directory) and '.git/info/exclude'. + to `.gitignore` (per-directory) and `.git/info/exclude`. Defaults to `$XDG_CONFIG_HOME/git/ignore`. If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore` is used instead. See linkgit:gitignore[5]. @@ -426,8 +429,8 @@ core.askPass:: command-line argument and write the password on its STDOUT. core.attributesFile:: - In addition to '.gitattributes' (per-directory) and - '.git/info/attributes', Git looks into this file for attributes + In addition to `.gitattributes` (per-directory) and + `.git/info/attributes`, Git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same way as for `core.excludesFile`. Its default value is `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not @@ -435,10 +438,10 @@ core.attributesFile:: core.hooksPath:: By default Git will look for your hooks in the - '$GIT_DIR/hooks' directory. Set this to different path, - e.g. '/etc/git/hooks', and Git will try to find your hooks in - that directory, e.g. '/etc/git/hooks/pre-receive' instead of - in '$GIT_DIR/hooks/pre-receive'. + `$GIT_DIR/hooks` directory. Set this to different path, + e.g. `/etc/git/hooks`, and Git will try to find your hooks in + that directory, e.g. `/etc/git/hooks/pre-receive` instead of + in `$GIT_DIR/hooks/pre-receive`. + The path can be either absolute or relative. A relative path is taken as relative to the directory where the hooks are run (see diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index e48bb987d7..5afb5a2cbc 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -10,7 +10,7 @@ diff.autoRefreshIndex:: diff.dirstat:: A comma separated list of `--dirstat` parameters specifying the - default behavior of the `--dirstat` option to linkgit:git-diff[1]` + default behavior of the `--dirstat` option to linkgit:git-diff[1] and friends. The defaults can be overridden on the command line (using `--dirstat=<param1,param2,...>`). The fallback defaults (when not changed by `diff.dirstat`) are `changes,noncumulative,3`. @@ -73,12 +73,13 @@ diff.external:: environment variable. The command is called with parameters as described under "git Diffs" in linkgit:git[1]. Note: if you want to use an external diff program only on a subset of - your files, you might want to use linkgit:gitattributes[5] instead. + your files, you might want to use linkgit:gitattributes[5] instead. diff.ignoreSubmodules:: Sets the default value of --ignore-submodules. Note that this affects only 'git diff' Porcelain, and not lower level 'diff' - commands such as 'git diff-files'. 'git checkout' also honors + commands such as 'git diff-files'. 'git checkout' + and 'git switch' also honor this setting when reporting uncommitted changes. Setting it to 'all' disables the submodule summary normally shown by 'git commit' and 'git status' when `status.submoduleSummary` is set unless it is diff --git a/Documentation/config/fetch.txt b/Documentation/config/fetch.txt index cbfad6cdbb..ba890b5884 100644 --- a/Documentation/config/fetch.txt +++ b/Documentation/config/fetch.txt @@ -63,3 +63,8 @@ fetch.negotiationAlgorithm:: Unknown values will cause 'git fetch' to error out. + See also the `--negotiation-tip` option for linkgit:git-fetch[1]. + +fetch.showForcedUpdates:: + Set to false to enable `--no-show-forced-updates` in + linkgit:git-fetch[1] and linkgit:git-pull[1] commands. + Defaults to true. diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt index dc77941c48..414a5a8a9d 100644 --- a/Documentation/config/format.txt +++ b/Documentation/config/format.txt @@ -85,3 +85,18 @@ format.outputDirectory:: format.useAutoBase:: A boolean value which lets you enable the `--base=auto` option of format-patch by default. + +format.notes:: + Provides the default value for the `--notes` option to + format-patch. Accepts a boolean value, or a ref which specifies + where to get notes. If false, format-patch defaults to + `--no-notes`. If true, format-patch defaults to `--notes`. If + set to a non-boolean value, format-patch defaults to + `--notes=<ref>`, where `ref` is the non-boolean value. Defaults + to false. ++ +If one wishes to use the ref `ref/notes/true`, please use that literal +instead. ++ +This configuration can be specified multiple times in order to allow +multiple notes refs to be included. diff --git a/Documentation/config/fsck.txt b/Documentation/config/fsck.txt index 879c5a29c4..450e8c38e3 100644 --- a/Documentation/config/fsck.txt +++ b/Documentation/config/fsck.txt @@ -23,9 +23,9 @@ When `fsck.<msg-id>` is set, errors can be switched to warnings and vice versa by configuring the `fsck.<msg-id>` setting where the `<msg-id>` is the fsck message ID and the value is one of `error`, `warn` or `ignore`. For convenience, fsck prefixes the error/warning -with the message ID, e.g. "missingEmail: invalid author/committer line -- missing email" means that setting `fsck.missingEmail = ignore` will -hide that issue. +with the message ID, e.g. "missingEmail: invalid author/committer +line - missing email" means that setting `fsck.missingEmail = ignore` +will hide that issue. + In general, it is better to enumerate existing objects with problems with `fsck.skipList`, instead of listing the kind of breakages these diff --git a/Documentation/config/gc.txt b/Documentation/config/gc.txt index c6fbb8a96f..02b92b18b5 100644 --- a/Documentation/config/gc.txt +++ b/Documentation/config/gc.txt @@ -1,25 +1,42 @@ gc.aggressiveDepth:: The depth parameter used in the delta compression algorithm used by 'git gc --aggressive'. This defaults - to 50. + to 50, which is the default for the `--depth` option when + `--aggressive` isn't in use. ++ +See the documentation for the `--depth` option in +linkgit:git-repack[1] for more details. gc.aggressiveWindow:: The window size parameter used in the delta compression algorithm used by 'git gc --aggressive'. This defaults - to 250. + to 250, which is a much more aggressive window size than + the default `--window` of 10. ++ +See the documentation for the `--window` option in +linkgit:git-repack[1] for more details. gc.auto:: When there are approximately more than this many loose objects in the repository, `git gc --auto` will pack them. Some Porcelain commands use this command to perform a light-weight garbage collection from time to time. The - default value is 6700. Setting this to 0 disables it. + default value is 6700. ++ +Setting this to 0 disables not only automatic packing based on the +number of loose objects, but any other heuristic `git gc --auto` will +otherwise use to determine if there's work to do, such as +`gc.autoPackLimit`. gc.autoPackLimit:: When there are more than this many packs that are not marked with `*.keep` file in the repository, `git gc --auto` consolidates them into one larger pack. The - default value is 50. Setting this to 0 disables it. + default value is 50. Setting this to 0 disables it. + Setting `gc.auto` to 0 will also disable this. ++ +See the `gc.bigPackThreshold` configuration variable below. When in +use, it'll affect how the auto pack limit works. gc.autoDetach:: Make `git gc --auto` return immediately and run in background @@ -36,11 +53,16 @@ Note that if the number of kept packs is more than gc.autoPackLimit, this configuration variable is ignored, all packs except the base pack will be repacked. After this the number of packs should go below gc.autoPackLimit and gc.bigPackThreshold should be respected again. ++ +If the amount of memory estimated for `git repack` to run smoothly is +not available and `gc.bigPackThreshold` is not set, the largest pack +will also be excluded (this is the equivalent of running `git gc` with +`--keep-base-pack`). gc.writeCommitGraph:: If true, then gc will rewrite the commit-graph file when - linkgit:git-gc[1] is run. When using linkgit:git-gc[1] - '--auto' the commit-graph will be updated if housekeeping is + linkgit:git-gc[1] is run. When using `git gc --auto` + the commit-graph will be updated if housekeeping is required. Default is false. See linkgit:git-commit-graph[1] for details. @@ -94,6 +116,12 @@ gc.<pattern>.reflogExpireUnreachable:: With "<pattern>" (e.g. "refs/stash") in the middle, the setting applies only to the refs that match the <pattern>. ++ +These types of entries are generally created as a result of using `git +commit --amend` or `git rebase` and are the commits prior to the amend +or rebase occurring. Since these changes are not part of the current +project most users will want to expire them sooner, which is why the +default is more aggressive than `gc.reflogExpire`. gc.rerereResolved:: Records of conflicted merge you resolved earlier are diff --git a/Documentation/config/gpg.txt b/Documentation/config/gpg.txt index 590fe0d4ba..cce2c89245 100644 --- a/Documentation/config/gpg.txt +++ b/Documentation/config/gpg.txt @@ -2,7 +2,7 @@ gpg.program:: Use this custom program instead of "`gpg`" found on `$PATH` when making or verifying a PGP signature. The program must support the same command-line interface as GPG, namely, to verify a detached - signature, "`gpg --verify $file - <$signature`" is run, and the + signature, "`gpg --verify $signature - <$file`" is run, and the program is expected to signal a good signature by exiting with code 0, and to generate an ASCII-armored detached signature, the standard input of "`gpg -bsau $key`" is fed with the contents to be @@ -16,5 +16,5 @@ gpg.format:: gpg.<format>.program:: Use this to customize the program used for the signing format you chose. (see `gpg.program` and `gpg.format`) `gpg.program` can still - be used as a legacy synonym for `gpg.openpgp.program`. The default + be used as a legacy synonym for `gpg.openpgp.program`. The default value for `gpg.x509.program` is "gpgsm". diff --git a/Documentation/config/http.txt b/Documentation/config/http.txt index a56d848bc0..5a32f5b0a5 100644 --- a/Documentation/config/http.txt +++ b/Documentation/config/http.txt @@ -68,6 +68,15 @@ http.saveCookies:: If set, store cookies received during requests to the file specified by http.cookieFile. Has no effect if http.cookieFile is unset. +http.version:: + Use the specified HTTP protocol version when communicating with a server. + If you want to force the default. The available and default version depend + on libcurl. Actually the possible values of + this option are: + + - HTTP/2 + - HTTP/1.1 + http.sslVersion:: The SSL version to use when negotiating an SSL connection, if you want to force the default. The available and default version diff --git a/Documentation/config/interactive.txt b/Documentation/config/interactive.txt index ad846dd7c9..a2d3c7ec44 100644 --- a/Documentation/config/interactive.txt +++ b/Documentation/config/interactive.txt @@ -2,7 +2,8 @@ interactive.singleKey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). Currently this is used by the `--patch` mode of - linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], + linkgit:git-add[1], linkgit:git-checkout[1], + linkgit:git-restore[1], linkgit:git-commit[1], linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this setting is silently ignored if portable keystroke input is not available; requires the Perl module Term::ReadKey. diff --git a/Documentation/config/log.txt b/Documentation/config/log.txt index 78d9e4453a..7798e10cb0 100644 --- a/Documentation/config/log.txt +++ b/Documentation/config/log.txt @@ -40,4 +40,5 @@ log.showSignature:: log.mailmap:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `--use-mailmap`. + linkgit:git-whatchanged[1] assume `--use-mailmap`, otherwise + assume `--no-use-mailmap`. False by default. diff --git a/Documentation/config/merge.txt b/Documentation/config/merge.txt index d389c73929..6a313937f8 100644 --- a/Documentation/config/merge.txt +++ b/Documentation/config/merge.txt @@ -39,9 +39,22 @@ merge.renameLimit:: is turned off. merge.renames:: - Whether and how Git detects renames. If set to "false", - rename detection is disabled. If set to "true", basic rename - detection is enabled. Defaults to the value of diff.renames. + Whether Git detects renames. If set to "false", rename detection + is disabled. If set to "true", basic rename detection is enabled. + Defaults to the value of diff.renames. + +merge.directoryRenames:: + Whether Git detects directory renames, affecting what happens at + merge time to new files added to a directory on one side of + history when that directory was renamed on the other side of + history. If merge.directoryRenames is set to "false", directory + rename detection is disabled, meaning that such new files will be + left behind in the old directory. If set to "true", directory + rename detection is enabled, meaning that such new files will be + moved into the new directory. If set to "conflict", a conflict + will be reported for such paths. If merge.renames is false, + merge.directoryRenames is ignored and treated as false. Defaults + to "conflict". merge.renormalize:: Tell Git that canonical representation of files in the diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index edac75c83f..9cdcfa7324 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -105,6 +105,15 @@ pack.useBitmaps:: true. You should not generally need to turn this off unless you are debugging pack bitmaps. +pack.useSparse:: + When true, git will default to using the '--sparse' option in + 'git pack-objects' when the '--revs' option is present. This + algorithm only walks trees that appear in paths that introduce new + objects. This can have significant performance benefits when + computing a pack to send a small change. However, it is possible + that extra objects are added to the pack-file if the included + commits contain certain types of direct renames. + pack.writeBitmaps (deprecated):: This is a deprecated synonym for `repack.writeBitmaps`. @@ -115,6 +124,4 @@ pack.writeBitmapHashCache:: bitmapped and non-bitmapped objects (e.g., when serving a fetch between an older, bitmapped pack and objects that have been pushed since the last gc). The downside is that it consumes 4 - bytes per object of disk space, and that JGit's bitmap - implementation does not understand it, causing it to complain if - Git and JGit are used on the same repository. Defaults to false. + bytes per object of disk space. Defaults to true. diff --git a/Documentation/config/pull.txt b/Documentation/config/pull.txt index bb23a9947d..b87cab31b3 100644 --- a/Documentation/config/pull.txt +++ b/Documentation/config/pull.txt @@ -18,9 +18,9 @@ When `merges`, pass the `--rebase-merges` option to 'git rebase' so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When preserve, also pass `--preserve-merges` along to 'git rebase' -so that locally committed merge commits will not be flattened -by running 'git pull'. +When `preserve` (deprecated in favor of `merges`), also pass +`--preserve-merges` along to 'git rebase' so that locally committed merge +commits will not be flattened by running 'git pull'. + When the value is `interactive`, the rebase is run in interactive mode. + diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt index f079bf6b7e..d98e32d812 100644 --- a/Documentation/config/rebase.txt +++ b/Documentation/config/rebase.txt @@ -1,16 +1,9 @@ rebase.useBuiltin:: - Set to `false` to use the legacy shellscript implementation of - linkgit:git-rebase[1]. Is `true` by default, which means use - the built-in rewrite of it in C. -+ -The C rewrite is first included with Git version 2.20. This option -serves an an escape hatch to re-enable the legacy version in case any -bugs are found in the rewrite. This option and the shellscript version -of linkgit:git-rebase[1] will be removed in some future release. -+ -If you find some reason to set this option to `false` other than -one-off testing you should report the behavior difference as a bug in -git. + Unused configuration variable. Used in Git versions 2.20 and + 2.21 as an escape hatch to enable the legacy shellscript + implementation of rebase. Now the built-in rewrite of it in C + is always used. Setting this will emit a warning, to alert any + remaining users that setting this now does nothing. rebase.stat:: Whether to show a diffstat of what changed upstream since the last @@ -64,3 +57,8 @@ instead of: ------------------------------------------- + Defaults to false. + +rebase.rescheduleFailedExec:: + Automatically reschedule `exec` commands that failed. This only makes + sense in interactive mode (or when an `--exec` option was provided). + This is the same as specifying the `--reschedule-failed-exec` option. diff --git a/Documentation/config/repack.txt b/Documentation/config/repack.txt index a5c37813fd..9c413e177e 100644 --- a/Documentation/config/repack.txt +++ b/Documentation/config/repack.txt @@ -24,4 +24,4 @@ repack.writeBitmaps:: packs created for clones and fetches, at the cost of some disk space and extra time spent on the initial repack. This has no effect if multiple packfiles are created. - Defaults to false. + Defaults to true on bare repos, false otherwise. diff --git a/Documentation/config/stash.txt b/Documentation/config/stash.txt index c583d46d6b..7710758efb 100644 --- a/Documentation/config/stash.txt +++ b/Documentation/config/stash.txt @@ -1,3 +1,18 @@ +stash.useBuiltin:: + Set to `false` to use the legacy shell script implementation of + linkgit:git-stash[1]. Is `true` by default, which means use + the built-in rewrite of it in C. ++ +The C rewrite is first included with Git version 2.22 (and Git for Windows +version 2.19). This option serves an an escape hatch to re-enable the +legacy version in case any bugs are found in the rewrite. This option and +the shell script version of linkgit:git-stash[1] will be removed in some +future release. ++ +If you find some reason to set this option to `false`, other than +one-off testing, you should report the behavior difference as a bug in +Git (see https://git-scm.com/community for details). + stash.showPatch:: If this is set to true, the `git stash show` command without an option will show the stash entry in patch form. Defaults to false. diff --git a/Documentation/config/status.txt b/Documentation/config/status.txt index ed72fa7dae..0fc704ab80 100644 --- a/Documentation/config/status.txt +++ b/Documentation/config/status.txt @@ -12,6 +12,11 @@ status.branch:: Set to true to enable --branch by default in linkgit:git-status[1]. The option --no-branch takes precedence over this variable. +status.aheadBehind:: + Set to true to enable `--ahead-behind` and false to enable + `--no-ahead-behind` by default in linkgit:git-status[1] for + non-porcelain status formats. Defaults to true. + status.displayCommentPrefix:: If set to true, linkgit:git-status[1] will insert a comment prefix before each output line (starting with diff --git a/Documentation/config/tag.txt b/Documentation/config/tag.txt index 663663bdec..ef5adb3f42 100644 --- a/Documentation/config/tag.txt +++ b/Documentation/config/tag.txt @@ -8,6 +8,14 @@ tag.sort:: linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the value of this variable will be used as the default. +tag.gpgSign:: + A boolean to specify whether all tags should be GPG signed. + Use of this option when running in an automated script can + result in a large number of tags being signed. It is therefore + convenient to use an agent to avoid typing your gpg passphrase + several times. Note that this option doesn't affects tag signing + behavior enabled by "-u <keyid>" or "--local-user=<keyid>" options. + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the diff --git a/Documentation/config/trace2.txt b/Documentation/config/trace2.txt new file mode 100644 index 0000000000..2edbfb02fe --- /dev/null +++ b/Documentation/config/trace2.txt @@ -0,0 +1,56 @@ +Trace2 config settings are only read from the system and global +config files; repository local and worktree config files and `-c` +command line arguments are not respected. + +trace2.normalTarget:: + This variable controls the normal target destination. + It may be overridden by the `GIT_TRACE2` environment variable. + The following table shows possible values. + +trace2.perfTarget:: + This variable controls the performance target destination. + It may be overridden by the `GIT_TRACE2_PERF` environment variable. + The following table shows possible values. + +trace2.eventTarget:: + This variable controls the event target destination. + It may be overridden by the `GIT_TRACE2_EVENT` environment variable. + The following table shows possible values. ++ +include::../trace2-target-values.txt[] + +trace2.normalBrief:: + Boolean. When true `time`, `filename`, and `line` fields are + omitted from normal output. May be overridden by the + `GIT_TRACE2_BRIEF` environment variable. Defaults to false. + +trace2.perfBrief:: + Boolean. When true `time`, `filename`, and `line` fields are + omitted from PERF output. May be overridden by the + `GIT_TRACE2_PERF_BRIEF` environment variable. Defaults to false. + +trace2.eventBrief:: + Boolean. When true `time`, `filename`, and `line` fields are + omitted from event output. May be overridden by the + `GIT_TRACE2_EVENT_BRIEF` environment variable. Defaults to false. + +trace2.eventNesting:: + Integer. Specifies desired depth of nested regions in the + event output. Regions deeper than this value will be + omitted. May be overridden by the `GIT_TRACE2_EVENT_NESTING` + environment variable. Defaults to 2. + +trace2.configParams:: + A comma-separated list of patterns of "important" config + settings that should be recorded in the trace2 output. + For example, `core.*,remote.*.url` would cause the trace2 + output to contain events listing each configured remote. + May be overridden by the `GIT_TRACE2_CONFIG_PARAMS` environment + variable. Unset by default. + +trace2.destinationDebug:: + Boolean. When true Git will print error messages when a + trace target destination cannot be opened for writing. + By default, these errors are suppressed and tracing is + silently disabled. May be overridden by the + `GIT_TRACE2_DST_DEBUG` environment variable. diff --git a/Documentation/config/user.txt b/Documentation/config/user.txt index b5b2ba1199..0557cbbceb 100644 --- a/Documentation/config/user.txt +++ b/Documentation/config/user.txt @@ -1,12 +1,19 @@ -user.email:: - Your email address to be recorded in any newly created commits. - Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and - `EMAIL` environment variables. See linkgit:git-commit-tree[1]. - user.name:: - Your full name to be recorded in any newly created commits. - Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME` - environment variables. See linkgit:git-commit-tree[1]. +user.email:: +author.name:: +author.email:: +committer.name:: +committer.email:: + The `user.name` and `user.email` variables determine what ends + up in the `author` and `committer` field of commit + objects. + If you need the `author` or `committer` to be different, the + `author.name`, `author.email`, `committer.name` or + `committer.email` variables can be set. + Also, all of these can be overridden by the `GIT_AUTHOR_NAME`, + `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_NAME`, + `GIT_COMMITTER_EMAIL` and `EMAIL` environment variables. + See linkgit:git-commit-tree[1] for more information. user.useConfigOnly:: Instruct Git to avoid trying to guess defaults for `user.email` diff --git a/Documentation/config/worktree.txt b/Documentation/config/worktree.txt index b853798fc2..048e349482 100644 --- a/Documentation/config/worktree.txt +++ b/Documentation/config/worktree.txt @@ -1,6 +1,6 @@ worktree.guessRemote:: - With `add`, if no branch argument, and neither of `-b` nor - `-B` nor `--detach` are given, the command defaults to + If no branch is specified and neither `-b` nor `-B` nor + `--detach` is used, then `git worktree add` defaults to creating a new branch from HEAD. If `worktree.guessRemote` is set to true, `worktree add` tries to find a remote-tracking branch whose name uniquely matches the new branch name. If |