diff options
Diffstat (limited to 'Documentation/config')
| -rw-r--r-- | Documentation/config/advice.txt | 4 | ||||
| -rw-r--r-- | Documentation/config/checkout.txt | 21 | ||||
| -rw-r--r-- | Documentation/config/clone.txt | 4 | ||||
| -rw-r--r-- | Documentation/config/color.txt | 5 | ||||
| -rw-r--r-- | Documentation/config/commitgraph.txt | 6 | ||||
| -rw-r--r-- | Documentation/config/core.txt | 2 | ||||
| -rw-r--r-- | Documentation/config/diff.txt | 2 | ||||
| -rw-r--r-- | Documentation/config/index.txt | 5 | ||||
| -rw-r--r-- | Documentation/config/init.txt | 2 | ||||
| -rw-r--r-- | Documentation/config/log.txt | 5 | ||||
| -rw-r--r-- | Documentation/config/lsrefs.txt | 9 | ||||
| -rw-r--r-- | Documentation/config/maintenance.txt | 5 | ||||
| -rw-r--r-- | Documentation/config/mergetool.txt | 15 | ||||
| -rw-r--r-- | Documentation/config/pack.txt | 22 | ||||
| -rw-r--r-- | Documentation/config/push.txt | 7 | ||||
| -rw-r--r-- | Documentation/config/rebase.txt | 10 | ||||
| -rw-r--r-- | Documentation/config/stash.txt | 5 | ||||
| -rw-r--r-- | Documentation/config/uploadpack.txt | 9 |
18 files changed, 122 insertions, 16 deletions
diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index acbd0c09aa..8b2849ff7b 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -119,4 +119,8 @@ advice.*:: addEmptyPathspec:: Advice shown if a user runs the add command without providing the pathspec parameter. + updateSparsePath:: + Advice shown when either linkgit:git-add[1] or linkgit:git-rm[1] + is asked to update index entries outside the current sparse + checkout. -- diff --git a/Documentation/config/checkout.txt b/Documentation/config/checkout.txt index 2cddf7b4b4..bfbca90f0e 100644 --- a/Documentation/config/checkout.txt +++ b/Documentation/config/checkout.txt @@ -21,3 +21,24 @@ checkout.guess:: Provides the default value for the `--guess` or `--no-guess` option in `git checkout` and `git switch`. See linkgit:git-switch[1] and linkgit:git-checkout[1]. + +checkout.workers:: + The number of parallel workers to use when updating the working tree. + The default is one, i.e. sequential execution. If set to a value less + than one, Git will use as many workers as the number of logical cores + available. This setting and `checkout.thresholdForParallelism` affect + all commands that perform checkout. E.g. checkout, clone, reset, + sparse-checkout, etc. ++ +Note: parallel checkout usually delivers better performance for repositories +located on SSDs or over NFS. For repositories on spinning disks and/or machines +with a small number of cores, the default sequential checkout often performs +better. The size and compression level of a repository might also influence how +well the parallel version performs. + +checkout.thresholdForParallelism:: + When running parallel checkout with a small number of files, the cost + of subprocess spawning and inter-process communication might outweigh + the parallelization gains. This setting allows to define the minimum + number of files for which parallel checkout should be attempted. The + default is 100. diff --git a/Documentation/config/clone.txt b/Documentation/config/clone.txt index 47de36a5fe..7bcfbd18a5 100644 --- a/Documentation/config/clone.txt +++ b/Documentation/config/clone.txt @@ -2,3 +2,7 @@ clone.defaultRemoteName:: The name of the remote to create when cloning a repository. Defaults to `origin`, and can be overridden by passing the `--origin` command-line option to linkgit:git-clone[1]. + +clone.rejectShallow:: + Reject to clone a repository if it is a shallow one, can be overridden by + passing option `--reject-shallow` in command line. See linkgit:git-clone[1] diff --git a/Documentation/config/color.txt b/Documentation/config/color.txt index d5daacb13a..e05d520a86 100644 --- a/Documentation/config/color.txt +++ b/Documentation/config/color.txt @@ -127,8 +127,9 @@ color.interactive.<slot>:: interactive commands. color.pager:: - A boolean to enable/disable colored output when the pager is in - use (default is true). + A boolean to specify whether `auto` color modes should colorize + output going to the pager. Defaults to true; set this to false + if your pager does not understand ANSI color codes. color.push:: A boolean to enable/disable color in push errors. May be set to diff --git a/Documentation/config/commitgraph.txt b/Documentation/config/commitgraph.txt index 4582c39fc4..30604e4a4c 100644 --- a/Documentation/config/commitgraph.txt +++ b/Documentation/config/commitgraph.txt @@ -1,3 +1,9 @@ +commitGraph.generationVersion:: + Specifies the type of generation number version to use when writing + or reading the commit-graph file. If version 1 is specified, then + the corrected commit dates will not be written or read. Defaults to + 2. + commitGraph.maxNewFilters:: Specifies the default value for the `--max-new-filters` option of `git commit-graph write` (c.f., linkgit:git-commit-graph[1]). diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index 160aacad84..c04f62a54a 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -625,4 +625,6 @@ core.abbrev:: computed based on the approximate number of packed objects in your repository, which hopefully is enough for abbreviated object names to stay unique for some time. + If set to "no", no abbreviation is made and the object names + are shown in their full length. The minimum length is 4. diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index c3ae136eba..2d3331f55c 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -85,6 +85,8 @@ diff.ignoreSubmodules:: and 'git status' when `status.submoduleSummary` is set unless it is overridden by using the --ignore-submodules command-line option. The 'git submodule' commands are not affected by this setting. + By default this is set to untracked so that any untracked + submodules are ignored. diff.mnemonicPrefix:: If set, 'git diff' uses a prefix pair that is different from the diff --git a/Documentation/config/index.txt b/Documentation/config/index.txt index 7cb50b37e9..75f3a2d105 100644 --- a/Documentation/config/index.txt +++ b/Documentation/config/index.txt @@ -14,6 +14,11 @@ index.recordOffsetTable:: Defaults to 'true' if index.threads has been explicitly enabled, 'false' otherwise. +index.sparse:: + When enabled, write the index using sparse-directory entries. This + has no effect unless `core.sparseCheckout` and + `core.sparseCheckoutCone` are both enabled. Defaults to 'false'. + index.threads:: Specifies the number of threads to spawn when loading the index. This is meant to reduce index load time on multiprocessor machines. diff --git a/Documentation/config/init.txt b/Documentation/config/init.txt index dc77f8c844..79c79d6617 100644 --- a/Documentation/config/init.txt +++ b/Documentation/config/init.txt @@ -4,4 +4,4 @@ init.templateDir:: init.defaultBranch:: Allows overriding the default branch name e.g. when initializing - a new repository or when cloning an empty repository. + a new repository. diff --git a/Documentation/config/log.txt b/Documentation/config/log.txt index 208d5fdcaa..456eb07800 100644 --- a/Documentation/config/log.txt +++ b/Documentation/config/log.txt @@ -24,6 +24,11 @@ log.excludeDecoration:: the config option can be overridden by the `--decorate-refs` option. +log.diffMerges:: + Set default diff format to be used for merge commits. See + `--diff-merges` in linkgit:git-log[1] for details. + Defaults to `separate`. + log.follow:: If `true`, `git log` will act as if the `--follow` option was used when a single <path> is given. This has the same limitations as `--follow`, diff --git a/Documentation/config/lsrefs.txt b/Documentation/config/lsrefs.txt new file mode 100644 index 0000000000..adeda0f24d --- /dev/null +++ b/Documentation/config/lsrefs.txt @@ -0,0 +1,9 @@ +lsrefs.unborn:: + May be "advertise" (the default), "allow", or "ignore". If "advertise", + the server will respond to the client sending "unborn" (as described in + protocol-v2.txt) and will advertise support for this feature during the + protocol v2 capability advertisement. "allow" is the same as + "advertise" except that the server will not advertise support for this + feature; this is useful for load-balanced servers that cannot be + updated atomically (for example), since the administrator could + configure "allow", then after a delay, configure "advertise". diff --git a/Documentation/config/maintenance.txt b/Documentation/config/maintenance.txt index a5ead09e4b..18f0562131 100644 --- a/Documentation/config/maintenance.txt +++ b/Documentation/config/maintenance.txt @@ -15,8 +15,9 @@ maintenance.strategy:: * `none`: This default setting implies no task are run at any schedule. * `incremental`: This setting optimizes for performing small maintenance activities that do not delete any data. This does not schedule the `gc` - task, but runs the `prefetch` and `commit-graph` tasks hourly and the - `loose-objects` and `incremental-repack` tasks daily. + task, but runs the `prefetch` and `commit-graph` tasks hourly, the + `loose-objects` and `incremental-repack` tasks daily, and the `pack-refs` + task weekly. maintenance.<task>.enabled:: This boolean config option controls whether the maintenance task diff --git a/Documentation/config/mergetool.txt b/Documentation/config/mergetool.txt index 16a27443a3..cafbbef46a 100644 --- a/Documentation/config/mergetool.txt +++ b/Documentation/config/mergetool.txt @@ -13,6 +13,11 @@ mergetool.<tool>.cmd:: merged; 'MERGED' contains the name of the file to which the merge tool should write the results of a successful merge. +mergetool.<tool>.hideResolved:: + Allows the user to override the global `mergetool.hideResolved` value + for a specific tool. See `mergetool.hideResolved` for the full + description. + mergetool.<tool>.trustExitCode:: For a custom merge command, specify whether the exit code of the merge command can be used to determine whether the merge was @@ -40,6 +45,16 @@ mergetool.meld.useAutoMerge:: value of `false` avoids using `--auto-merge` altogether, and is the default value. +mergetool.hideResolved:: + During a merge Git will automatically resolve as many conflicts as + possible and write the 'MERGED' file containing conflict markers around + any conflicts that it cannot resolve; 'LOCAL' and 'REMOTE' normally + represent the versions of the file from before Git's conflict + resolution. This flag causes 'LOCAL' and 'REMOTE' to be overwriten so + that only the unresolved conflicts are presented to the merge tool. Can + be configured per-tool via the `mergetool.<tool>.hideResolved` + configuration variable. Defaults to `false`. + mergetool.keepBackup:: After performing a merge, the original file with conflict markers can be saved as a file with a `.orig` extension. If this variable diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index 837f1b1679..c0844d8d8e 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -122,6 +122,21 @@ pack.useSparse:: commits contain certain types of direct renames. Default is `true`. +pack.preferBitmapTips:: + When selecting which commits will receive bitmaps, prefer a + commit at the tip of any reference that is a suffix of any value + of this configuration over any other commits in the "selection + window". ++ +Note that setting this configuration to `refs/foo` does not mean that +the commits at the tips of `refs/foo/bar` and `refs/foo/baz` will +necessarily be selected. This is because commits are selected for +bitmaps from within a series of windows of variable length. ++ +If a commit at the tip of any reference which is a suffix of any value +of this configuration is seen in a window, it is immediately given +preference over any other commit in that window. + pack.writeBitmaps (deprecated):: This is a deprecated synonym for `repack.writeBitmaps`. @@ -133,3 +148,10 @@ pack.writeBitmapHashCache:: between an older, bitmapped pack and objects that have been pushed since the last gc). The downside is that it consumes 4 bytes per object of disk space. Defaults to true. + +pack.writeReverseIndex:: + When true, git will write a corresponding .rev file (see: + link:../technical/pack-format.html[Documentation/technical/pack-format.txt]) + for each new packfile that it writes in all places except for + linkgit:git-fast-import[1] and in the bulk checkin mechanism. + Defaults to false. diff --git a/Documentation/config/push.txt b/Documentation/config/push.txt index 21b256e0a4..f2667b2689 100644 --- a/Documentation/config/push.txt +++ b/Documentation/config/push.txt @@ -120,3 +120,10 @@ push.useForceIfIncludes:: `--force-if-includes` as an option to linkgit:git-push[1] in the command line. Adding `--no-force-if-includes` at the time of push overrides this configuration setting. + +push.negotiate:: + If set to "true", attempt to reduce the size of the packfile + sent by rounds of negotiation in which the client and the + server attempt to find commits in common. If "false", Git will + rely solely on the server's ref advertisement to find commits + in common. diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt index 7f7a07d22f..8c979cb20f 100644 --- a/Documentation/config/rebase.txt +++ b/Documentation/config/rebase.txt @@ -1,10 +1,3 @@ -rebase.useBuiltin:: - Unused configuration variable. Used in Git versions 2.20 and - 2.21 as an escape hatch to enable the legacy shellscript - implementation of rebase. Now the built-in rewrite of it in C - is always used. Setting this will emit a warning, to alert any - remaining users that setting this now does nothing. - rebase.backend:: Default backend to use for rebasing. Possible choices are 'apply' or 'merge'. In the future, if the merge backend gains @@ -68,3 +61,6 @@ rebase.rescheduleFailedExec:: Automatically reschedule `exec` commands that failed. This only makes sense in interactive mode (or when an `--exec` option was provided). This is the same as specifying the `--reschedule-failed-exec` option. + +rebase.forkPoint:: + If set to false set `--no-fork-point` option by default. diff --git a/Documentation/config/stash.txt b/Documentation/config/stash.txt index 00eb35434e..9ed775281f 100644 --- a/Documentation/config/stash.txt +++ b/Documentation/config/stash.txt @@ -5,6 +5,11 @@ stash.useBuiltin:: is always used. Setting this will emit a warning, to alert any remaining users that setting this now does nothing. +stash.showIncludeUntracked:: + If this is set to true, the `git stash show` command will show + the untracked files of a stash entry. Defaults to false. See + description of 'show' command in linkgit:git-stash[1]. + stash.showPatch:: If this is set to true, the `git stash show` command without an option will show the stash entry in patch form. Defaults to false. diff --git a/Documentation/config/uploadpack.txt b/Documentation/config/uploadpack.txt index b0d761282c..32fad5bbe8 100644 --- a/Documentation/config/uploadpack.txt +++ b/Documentation/config/uploadpack.txt @@ -59,15 +59,16 @@ uploadpack.allowFilter:: uploadpackfilter.allow:: Provides a default value for unspecified object filters (see: the - below configuration variable). + below configuration variable). If set to `true`, this will also + enable all filters which get added in the future. Defaults to `true`. uploadpackfilter.<filter>.allow:: Explicitly allow or ban the object filter corresponding to `<filter>`, where `<filter>` may be one of: `blob:none`, - `blob:limit`, `tree`, `sparse:oid`, or `combine`. If using - combined filters, both `combine` and all of the nested filter - kinds must be allowed. Defaults to `uploadpackfilter.allow`. + `blob:limit`, `object:type`, `tree`, `sparse:oid`, or `combine`. + If using combined filters, both `combine` and all of the nested + filter kinds must be allowed. Defaults to `uploadpackfilter.allow`. uploadpackfilter.tree.maxDepth:: Only allow `--filter=tree:<n>` when `<n>` is no more than the value of |