diff options
Diffstat (limited to 'Documentation/config')
-rw-r--r-- | Documentation/config/add.txt | 5 | ||||
-rw-r--r-- | Documentation/config/advice.txt | 9 | ||||
-rw-r--r-- | Documentation/config/branch.txt | 7 | ||||
-rw-r--r-- | Documentation/config/core.txt | 27 | ||||
-rw-r--r-- | Documentation/config/feature.txt | 3 | ||||
-rw-r--r-- | Documentation/config/format.txt | 29 | ||||
-rw-r--r-- | Documentation/config/gpg.txt | 15 | ||||
-rw-r--r-- | Documentation/config/http.txt | 33 | ||||
-rw-r--r-- | Documentation/config/pack.txt | 11 | ||||
-rw-r--r-- | Documentation/config/protocol.txt | 9 | ||||
-rw-r--r-- | Documentation/config/pull.txt | 7 | ||||
-rw-r--r-- | Documentation/config/push.txt | 9 | ||||
-rw-r--r-- | Documentation/config/rebase.txt | 6 | ||||
-rw-r--r-- | Documentation/config/stash.txt | 18 | ||||
-rw-r--r-- | Documentation/config/submodule.txt | 4 | ||||
-rw-r--r-- | Documentation/config/tag.txt | 9 | ||||
-rw-r--r-- | Documentation/config/tar.txt | 6 | ||||
-rw-r--r-- | Documentation/config/trace2.txt | 9 | ||||
-rw-r--r-- | Documentation/config/user.txt | 7 |
19 files changed, 175 insertions, 48 deletions
diff --git a/Documentation/config/add.txt b/Documentation/config/add.txt index 4d753f006e..c9f748f81c 100644 --- a/Documentation/config/add.txt +++ b/Documentation/config/add.txt @@ -5,3 +5,8 @@ add.ignore-errors (deprecated):: option of linkgit:git-add[1]. `add.ignore-errors` is deprecated, as it does not follow the usual naming convention for configuration variables. + +add.interactive.useBuiltin:: + [EXPERIMENTAL] Set to `true` to use the experimental built-in + implementation of the interactive version of linkgit:git-add[1] + instead of the Perl script version. Is `false` by default. diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index 6aaa360202..bdd37c3eaa 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -107,4 +107,13 @@ advice.*:: editor input from the user. nestedTag:: Advice shown if a user attempts to recursively tag a tag object. + submoduleAlternateErrorStrategyDie:: + Advice shown when a submodule.alternateErrorStrategy option + configured to "die" causes a fatal error. + addIgnoredFile:: + Advice shown if a user attempts to add an ignored file to + the index. + addEmptyPathspec:: + Advice shown if a user runs the add command without providing + the pathspec parameter. -- diff --git a/Documentation/config/branch.txt b/Documentation/config/branch.txt index a592d522a7..cc5f3249fc 100644 --- a/Documentation/config/branch.txt +++ b/Documentation/config/branch.txt @@ -81,15 +81,16 @@ branch.<name>.rebase:: "git pull" is run. See "pull.rebase" for doing this in a non branch-specific manner. + -When `merges`, pass the `--rebase-merges` option to 'git rebase' +When `merges` (or just 'm'), pass the `--rebase-merges` option to 'git rebase' so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When `preserve` (deprecated in favor of `merges`), also pass +When `preserve` (or just 'p', deprecated in favor of `merges`), also pass `--preserve-merges` along to 'git rebase' so that locally committed merge commits will not be flattened by running 'git pull'. + -When the value is `interactive`, the rebase is run in interactive mode. +When the value is `interactive` (or just 'i'), the rebase is run in interactive +mode. + *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index 852d2ba37a..74619a9c03 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -68,6 +68,17 @@ core.fsmonitor:: avoiding unnecessary processing of files that have not changed. See the "fsmonitor-watchman" section of linkgit:githooks[5]. +core.fsmonitorHookVersion:: + Sets the version of hook that is to be used when calling fsmonitor. + There are currently versions 1 and 2. When this is not set, + version 2 will be tried first and if it fails then version 1 + will be tried. Version 1 uses a timestamp as input to determine + which files have changes since that time but some monitors + like watchman have race conditions when used with a timestamp. + Version 2 uses an opaque string so that the monitor can return + something that can be used to determine what files have changed + without race conditions. + core.trustctime:: If false, the ctime differences between the index and the working tree are ignored; useful when the inode change time @@ -559,6 +570,12 @@ core.unsetenvvars:: Defaults to `PERL5LIB` to account for the fact that Git for Windows insists on using its own Perl interpreter. +core.restrictinheritedhandles:: + Windows-only: override whether spawned processes inherit only standard + file handles (`stdin`, `stdout` and `stderr`) or all handles. Can be + `auto`, `true` or `false`. Defaults to `auto`, which means `true` on + Windows 7 and later, and `false` on older Windows versions. + core.createObject:: You can set this to 'link', in which case a hardlink followed by a delete of the source are used to make sure that object creation @@ -593,8 +610,14 @@ core.multiPackIndex:: multi-pack-index design document]. core.sparseCheckout:: - Enable "sparse checkout" feature. See section "Sparse checkout" in - linkgit:git-read-tree[1] for more information. + Enable "sparse checkout" feature. See linkgit:git-sparse-checkout[1] + for more information. + +core.sparseCheckoutCone:: + Enables the "cone mode" of the sparse checkout feature. When the + sparse-checkout file contains a limited set of patterns, then this + mode provides significant performance advantages. See + linkgit:git-sparse-checkout[1] for more information. core.abbrev:: Set the length object names are abbreviated to. If diff --git a/Documentation/config/feature.txt b/Documentation/config/feature.txt index 875f8c8a66..4e3a5c0ceb 100644 --- a/Documentation/config/feature.txt +++ b/Documentation/config/feature.txt @@ -12,9 +12,6 @@ feature.experimental:: setting if you are interested in providing feedback on experimental features. The new default values are: + -* `pack.useSparse=true` uses a new algorithm when constructing a pack-file -which can improve `git push` performance in repos with many files. -+ * `fetch.negotiationAlgorithm=skipping` may improve fetch negotiation times by skipping more commits at a time, reducing the number of round trips. + diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt index 40cad9278f..564e8091ba 100644 --- a/Documentation/config/format.txt +++ b/Documentation/config/format.txt @@ -36,6 +36,12 @@ format.subjectPrefix:: The default for format-patch is to output files with the '[PATCH]' subject prefix. Use this variable to change that prefix. +format.coverFromDescription:: + The default mode for format-patch to determine which parts of + the cover letter will be populated using the branch's + description. See the `--cover-from-description` option in + linkgit:git-format-patch[1]. + format.signature:: The default for format-patch is to output a signature containing the Git version number. Use this variable to change that default. @@ -51,6 +57,11 @@ format.suffix:: `.patch`. Use this variable to change that suffix (make sure to include the dot if you want it). +format.encodeEmailHeaders:: + Encode email headers that have non-ASCII characters with + "Q-encoding" (described in RFC 2047) for email transmission. + Defaults to true. + format.pretty:: The default pretty format for log/show/whatchanged command, See linkgit:git-log[1], linkgit:git-show[1], @@ -100,4 +111,20 @@ If one wishes to use the ref `ref/notes/true`, please use that literal instead. + This configuration can be specified multiple times in order to allow -multiple notes refs to be included. +multiple notes refs to be included. In that case, it will behave +similarly to multiple `--[no-]notes[=]` options passed in. That is, a +value of `true` will show the default notes, a value of `<ref>` will +also show notes from that notes ref and a value of `false` will negate +previous configurations and not show notes. ++ +For example, ++ +------------ +[format] + notes = true + notes = foo + notes = false + notes = bar +------------ ++ +will only show notes from `refs/notes/bar`. diff --git a/Documentation/config/gpg.txt b/Documentation/config/gpg.txt index cce2c89245..d94025cb36 100644 --- a/Documentation/config/gpg.txt +++ b/Documentation/config/gpg.txt @@ -18,3 +18,18 @@ gpg.<format>.program:: chose. (see `gpg.program` and `gpg.format`) `gpg.program` can still be used as a legacy synonym for `gpg.openpgp.program`. The default value for `gpg.x509.program` is "gpgsm". + +gpg.minTrustLevel:: + Specifies a minimum trust level for signature verification. If + this option is unset, then signature verification for merge + operations require a key with at least `marginal` trust. Other + operations that perform signature verification require a key + with at least `undefined` trust. Setting this option overrides + the required trust-level for all operations. Supported values, + in increasing order of significance: ++ +* `undefined` +* `never` +* `marginal` +* `fully` +* `ultimate` diff --git a/Documentation/config/http.txt b/Documentation/config/http.txt index 5a32f5b0a5..3968fbb697 100644 --- a/Documentation/config/http.txt +++ b/Documentation/config/http.txt @@ -29,6 +29,27 @@ http.proxyAuthMethod:: * `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`) -- +http.proxySSLCert:: + The pathname of a file that stores a client certificate to use to authenticate + with an HTTPS proxy. Can be overridden by the `GIT_PROXY_SSL_CERT` environment + variable. + +http.proxySSLKey:: + The pathname of a file that stores a private key to use to authenticate with + an HTTPS proxy. Can be overridden by the `GIT_PROXY_SSL_KEY` environment + variable. + +http.proxySSLCertPasswordProtected:: + Enable Git's password prompt for the proxy SSL certificate. Otherwise OpenSSL + will prompt the user, possibly many times, if the certificate or private key + is encrypted. Can be overriden by the `GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED` + environment variable. + +http.proxySSLCAInfo:: + Pathname to the file containing the certificate bundle that should be used to + verify the proxy with when using an HTTPS proxy. Can be overriden by the + `GIT_PROXY_SSL_CAINFO` environment variable. + http.emptyAuth:: Attempt authentication without seeking a username or password. This can be used to attempt GSS-Negotiate authentication without specifying @@ -71,7 +92,7 @@ http.saveCookies:: http.version:: Use the specified HTTP protocol version when communicating with a server. If you want to force the default. The available and default version depend - on libcurl. Actually the possible values of + on libcurl. Currently the possible values of this option are: - HTTP/2 @@ -84,7 +105,7 @@ http.sslVersion:: particular configuration of the crypto library in use. Internally this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl documentation for more details on the format of this option and - for the ssl version supported. Actually the possible values of + for the ssl version supported. Currently the possible values of this option are: - sslv2 @@ -199,6 +220,14 @@ http.postBuffer:: Transfer-Encoding: chunked is used to avoid creating a massive pack file locally. Default is 1 MiB, which is sufficient for most requests. ++ +Note that raising this limit is only effective for disabling chunked +transfer encoding and therefore should be used only where the remote +server or a proxy only supports HTTP/1.0 or is noncompliant with the +HTTP standard. Raising this is not, in general, an effective solution +for most push problems, but can increase memory consumption +significantly since the entire buffer is allocated even for small +pushes. http.lowSpeedLimit, http.lowSpeedTime:: If the HTTP transfer speed is less than 'http.lowSpeedLimit' diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index 1d66f0c992..837f1b1679 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -27,6 +27,13 @@ Note that changing the compression level will not automatically recompress all existing objects. You can force recompression by passing the -F option to linkgit:git-repack[1]. +pack.allowPackReuse:: + When true, and when reachability bitmaps are enabled, + pack-objects will try to send parts of the bitmapped packfile + verbatim. This can reduce memory and CPU usage to serve fetches, + but might result in sending a slightly larger pack. Defaults to + true. + pack.island:: An extended regular expression configuring a set of delta islands. See "DELTA ISLANDS" in linkgit:git-pack-objects[1] @@ -112,8 +119,8 @@ pack.useSparse:: objects. This can have significant performance benefits when computing a pack to send a small change. However, it is possible that extra objects are added to the pack-file if the included - commits contain certain types of direct renames. Default is `false` - unless `feature.experimental` is enabled. + commits contain certain types of direct renames. Default is + `true`. pack.writeBitmaps (deprecated):: This is a deprecated synonym for `repack.writeBitmaps`. diff --git a/Documentation/config/protocol.txt b/Documentation/config/protocol.txt index bfccc07491..756591d77b 100644 --- a/Documentation/config/protocol.txt +++ b/Documentation/config/protocol.txt @@ -45,11 +45,10 @@ The protocol names currently used by git are: -- protocol.version:: - Experimental. If set, clients will attempt to communicate with a - server using the specified protocol version. If unset, no - attempt will be made by the client to communicate using a - particular protocol version, this results in protocol version 0 - being used. + If set, clients will attempt to communicate with a server + using the specified protocol version. If the server does + not support it, communication falls back to version 0. + If unset, the default is `2`. Supported versions: + -- diff --git a/Documentation/config/pull.txt b/Documentation/config/pull.txt index b87cab31b3..5404830609 100644 --- a/Documentation/config/pull.txt +++ b/Documentation/config/pull.txt @@ -14,15 +14,16 @@ pull.rebase:: pull" is run. See "branch.<name>.rebase" for setting this on a per-branch basis. + -When `merges`, pass the `--rebase-merges` option to 'git rebase' +When `merges` (or just 'm'), pass the `--rebase-merges` option to 'git rebase' so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When `preserve` (deprecated in favor of `merges`), also pass +When `preserve` (or just 'p', deprecated in favor of `merges`), also pass `--preserve-merges` along to 'git rebase' so that locally committed merge commits will not be flattened by running 'git pull'. + -When the value is `interactive`, the rebase is run in interactive mode. +When the value is `interactive` (or just 'i'), the rebase is run in interactive +mode. + *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] diff --git a/Documentation/config/push.txt b/Documentation/config/push.txt index 0a0e000569..0a7aa322a9 100644 --- a/Documentation/config/push.txt +++ b/Documentation/config/push.txt @@ -1,6 +1,7 @@ push.default:: Defines the action `git push` should take if no refspec is - explicitly given. Different values are well-suited for + given (whether from the command-line, config, or elsewhere). + Different values are well-suited for specific workflows; for instance, in a purely central workflow (i.e. the fetch source is equal to the push destination), `upstream` is probably what you want. Possible values are: @@ -8,7 +9,7 @@ push.default:: -- * `nothing` - do not push anything (error out) unless a refspec is - explicitly given. This is primarily meant for people who want to + given. This is primarily meant for people who want to avoid mistakes by always being explicit. * `current` - push the current branch to update a branch with the same @@ -79,7 +80,7 @@ higher priority configuration file (e.g. `.git/config` in a repository) to clear the values inherited from a lower priority configuration files (e.g. `$HOME/.gitconfig`). + --- +---- Example: @@ -96,7 +97,7 @@ repo/.git/config This will result in only b (a and c are cleared). --- +---- push.recurseSubmodules:: Make sure all submodule commits used by the revisions to be pushed diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt index d98e32d812..7f7a07d22f 100644 --- a/Documentation/config/rebase.txt +++ b/Documentation/config/rebase.txt @@ -5,6 +5,12 @@ rebase.useBuiltin:: is always used. Setting this will emit a warning, to alert any remaining users that setting this now does nothing. +rebase.backend:: + Default backend to use for rebasing. Possible choices are + 'apply' or 'merge'. In the future, if the merge backend gains + all remaining capabilities of the apply backend, this setting + may become unused. + rebase.stat:: Whether to show a diffstat of what changed upstream since the last rebase. False by default. diff --git a/Documentation/config/stash.txt b/Documentation/config/stash.txt index abc7ef4a3a..00eb35434e 100644 --- a/Documentation/config/stash.txt +++ b/Documentation/config/stash.txt @@ -1,17 +1,9 @@ stash.useBuiltin:: - Set to `false` to use the legacy shell script implementation of - linkgit:git-stash[1]. Is `true` by default, which means use - the built-in rewrite of it in C. -+ -The C rewrite is first included with Git version 2.22 (and Git for Windows -version 2.19). This option serves as an escape hatch to re-enable the -legacy version in case any bugs are found in the rewrite. This option and -the shell script version of linkgit:git-stash[1] will be removed in some -future release. -+ -If you find some reason to set this option to `false`, other than -one-off testing, you should report the behavior difference as a bug in -Git (see https://git-scm.com/community for details). + Unused configuration variable. Used in Git versions 2.22 to + 2.26 as an escape hatch to enable the legacy shellscript + implementation of stash. Now the built-in rewrite of it in C + is always used. Setting this will emit a warning, to alert any + remaining users that setting this now does nothing. stash.showPatch:: If this is set to true, the `git stash show` command without an diff --git a/Documentation/config/submodule.txt b/Documentation/config/submodule.txt index 0a1293b051..b33177151c 100644 --- a/Documentation/config/submodule.txt +++ b/Documentation/config/submodule.txt @@ -79,4 +79,6 @@ submodule.alternateLocation:: submodule.alternateErrorStrategy:: Specifies how to treat errors with the alternates for a submodule as computed via `submodule.alternateLocation`. Possible values are - `ignore`, `info`, `die`. Default is `die`. + `ignore`, `info`, `die`. Default is `die`. Note that if set to `ignore` + or `info`, and if there is an error with the computed alternate, the + clone proceeds as if no alternate was specified. diff --git a/Documentation/config/tag.txt b/Documentation/config/tag.txt index ef5adb3f42..5062a057ff 100644 --- a/Documentation/config/tag.txt +++ b/Documentation/config/tag.txt @@ -13,12 +13,5 @@ tag.gpgSign:: Use of this option when running in an automated script can result in a large number of tags being signed. It is therefore convenient to use an agent to avoid typing your gpg passphrase - several times. Note that this option doesn't affects tag signing + several times. Note that this option doesn't affect tag signing behavior enabled by "-u <keyid>" or "--local-user=<keyid>" options. - -tar.umask:: - This variable can be used to restrict the permission bits of - tar archive entries. The default is 0002, which turns off the - world write bit. The special value "user" indicates that the - archiving user's umask will be used instead. See umask(2) and - linkgit:git-archive[1]. diff --git a/Documentation/config/tar.txt b/Documentation/config/tar.txt new file mode 100644 index 0000000000..de8ff48ea9 --- /dev/null +++ b/Documentation/config/tar.txt @@ -0,0 +1,6 @@ +tar.umask:: + This variable can be used to restrict the permission bits of + tar archive entries. The default is 0002, which turns off the + world write bit. The special value "user" indicates that the + archiving user's umask will be used instead. See umask(2) and + linkgit:git-archive[1]. diff --git a/Documentation/config/trace2.txt b/Documentation/config/trace2.txt index 4ce0b9a6d1..01d3afd8a8 100644 --- a/Documentation/config/trace2.txt +++ b/Documentation/config/trace2.txt @@ -48,6 +48,15 @@ trace2.configParams:: May be overridden by the `GIT_TRACE2_CONFIG_PARAMS` environment variable. Unset by default. +trace2.envVars:: + A comma-separated list of "important" environment variables that should + be recorded in the trace2 output. For example, + `GIT_HTTP_USER_AGENT,GIT_CONFIG` would cause the trace2 output to + contain events listing the overrides for HTTP user agent and the + location of the Git configuration file (assuming any are set). May be + overriden by the `GIT_TRACE2_ENV_VARS` environment variable. Unset by + default. + trace2.destinationDebug:: Boolean. When true Git will print error messages when a trace target destination cannot be opened for writing. diff --git a/Documentation/config/user.txt b/Documentation/config/user.txt index 0557cbbceb..59aec7c3ae 100644 --- a/Documentation/config/user.txt +++ b/Documentation/config/user.txt @@ -13,7 +13,12 @@ committer.email:: Also, all of these can be overridden by the `GIT_AUTHOR_NAME`, `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_NAME`, `GIT_COMMITTER_EMAIL` and `EMAIL` environment variables. - See linkgit:git-commit-tree[1] for more information. ++ +Note that the `name` forms of these variables conventionally refer to +some form of a personal name. See linkgit:git-commit[1] and the +environment variables section of linkgit:git[1] for more information on +these settings and the `credential.username` option if you're looking +for authentication credentials instead. user.useConfigOnly:: Instruct Git to avoid trying to guess defaults for `user.email` |