diff options
Diffstat (limited to 'Documentation/config')
33 files changed, 314 insertions, 70 deletions
diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index bdd37c3eaa..8b2849ff7b 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -10,9 +10,8 @@ advice.*:: that the check is disabled. pushUpdateRejected:: Set this variable to 'false' if you want to disable - 'pushNonFFCurrent', - 'pushNonFFMatching', 'pushAlreadyExists', - 'pushFetchFirst', and 'pushNeedsForce' + 'pushNonFFCurrent', 'pushNonFFMatching', 'pushAlreadyExists', + 'pushFetchFirst', 'pushNeedsForce', and 'pushRefNeedsUpdate' simultaneously. pushNonFFCurrent:: Advice shown when linkgit:git-push[1] fails due to a @@ -41,6 +40,10 @@ advice.*:: we can still suggest that the user push to either refs/heads/* or refs/tags/* based on the type of the source object. + pushRefNeedsUpdate:: + Shown when linkgit:git-push[1] rejects a forced update of + a branch when its remote-tracking ref has updates that we + do not have locally. statusAheadBehind:: Shown when linkgit:git-status[1] computes the ahead/behind counts for a local ref compared to its remote tracking ref, @@ -116,4 +119,8 @@ advice.*:: addEmptyPathspec:: Advice shown if a user runs the add command without providing the pathspec parameter. + updateSparsePath:: + Advice shown when either linkgit:git-add[1] or linkgit:git-rm[1] + is asked to update index entries outside the current sparse + checkout. -- diff --git a/Documentation/config/blame.txt b/Documentation/config/blame.txt index 9468e8599c..4d047c1790 100644 --- a/Documentation/config/blame.txt +++ b/Documentation/config/blame.txt @@ -27,7 +27,7 @@ blame.ignoreRevsFile:: file names will reset the list of ignored revisions. This option will be handled before the command line option `--ignore-revs-file`. -blame.markUnblamables:: +blame.markUnblamableLines:: Mark lines that were changed by an ignored revision that we could not attribute to another commit with a '*' in the output of linkgit:git-blame[1]. diff --git a/Documentation/config/checkout.txt b/Documentation/config/checkout.txt index 6b646813ab..bfbca90f0e 100644 --- a/Documentation/config/checkout.txt +++ b/Documentation/config/checkout.txt @@ -1,18 +1,44 @@ checkout.defaultRemote:: - When you run 'git checkout <something>' - or 'git switch <something>' and only have one + When you run `git checkout <something>` + or `git switch <something>` and only have one remote, it may implicitly fall back on checking out and - tracking e.g. 'origin/<something>'. This stops working as soon - as you have more than one remote with a '<something>' + tracking e.g. `origin/<something>`. This stops working as soon + as you have more than one remote with a `<something>` reference. This setting allows for setting the name of a preferred remote that should always win when it comes to disambiguation. The typical use-case is to set this to `origin`. + Currently this is used by linkgit:git-switch[1] and -linkgit:git-checkout[1] when 'git checkout <something>' -or 'git switch <something>' -will checkout the '<something>' branch on another remote, -and by linkgit:git-worktree[1] when 'git worktree add' refers to a +linkgit:git-checkout[1] when `git checkout <something>` +or `git switch <something>` +will checkout the `<something>` branch on another remote, +and by linkgit:git-worktree[1] when `git worktree add` refers to a remote branch. This setting might be used for other checkout-like commands or functionality in the future. + +checkout.guess:: + Provides the default value for the `--guess` or `--no-guess` + option in `git checkout` and `git switch`. See + linkgit:git-switch[1] and linkgit:git-checkout[1]. + +checkout.workers:: + The number of parallel workers to use when updating the working tree. + The default is one, i.e. sequential execution. If set to a value less + than one, Git will use as many workers as the number of logical cores + available. This setting and `checkout.thresholdForParallelism` affect + all commands that perform checkout. E.g. checkout, clone, reset, + sparse-checkout, etc. ++ +Note: parallel checkout usually delivers better performance for repositories +located on SSDs or over NFS. For repositories on spinning disks and/or machines +with a small number of cores, the default sequential checkout often performs +better. The size and compression level of a repository might also influence how +well the parallel version performs. + +checkout.thresholdForParallelism:: + When running parallel checkout with a small number of files, the cost + of subprocess spawning and inter-process communication might outweigh + the parallelization gains. This setting allows to define the minimum + number of files for which parallel checkout should be attempted. The + default is 100. diff --git a/Documentation/config/clone.txt b/Documentation/config/clone.txt new file mode 100644 index 0000000000..7bcfbd18a5 --- /dev/null +++ b/Documentation/config/clone.txt @@ -0,0 +1,8 @@ +clone.defaultRemoteName:: + The name of the remote to create when cloning a repository. Defaults to + `origin`, and can be overridden by passing the `--origin` command-line + option to linkgit:git-clone[1]. + +clone.rejectShallow:: + Reject to clone a repository if it is a shallow one, can be overridden by + passing option `--reject-shallow` in command line. See linkgit:git-clone[1] diff --git a/Documentation/config/color.txt b/Documentation/config/color.txt index d5daacb13a..e05d520a86 100644 --- a/Documentation/config/color.txt +++ b/Documentation/config/color.txt @@ -127,8 +127,9 @@ color.interactive.<slot>:: interactive commands. color.pager:: - A boolean to enable/disable colored output when the pager is in - use (default is true). + A boolean to specify whether `auto` color modes should colorize + output going to the pager. Defaults to true; set this to false + if your pager does not understand ANSI color codes. color.push:: A boolean to enable/disable color in push errors. May be set to diff --git a/Documentation/config/commitgraph.txt b/Documentation/config/commitgraph.txt new file mode 100644 index 0000000000..30604e4a4c --- /dev/null +++ b/Documentation/config/commitgraph.txt @@ -0,0 +1,14 @@ +commitGraph.generationVersion:: + Specifies the type of generation number version to use when writing + or reading the commit-graph file. If version 1 is specified, then + the corrected commit dates will not be written or read. Defaults to + 2. + +commitGraph.maxNewFilters:: + Specifies the default value for the `--max-new-filters` option of `git + commit-graph write` (c.f., linkgit:git-commit-graph[1]). + +commitGraph.readChangedPaths:: + If true, then git will use the changed-path Bloom filters in the + commit-graph file (if it exists, and they are present). Defaults to + true. See linkgit:git-commit-graph[1] for more information. diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index 74619a9c03..c04f62a54a 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -399,7 +399,7 @@ the largest projects. You probably do not need to adjust this value. Common unit suffixes of 'k', 'm', or 'g' are supported. core.deltaBaseCacheLimit:: - Maximum number of bytes to reserve for caching base objects + Maximum number of bytes per thread to reserve for caching base objects that may be referenced by multiple deltified objects. By storing the entire decompressed base objects in a cache Git is able to avoid unpacking and decompressing frequently used base @@ -606,8 +606,8 @@ core.useReplaceRefs:: core.multiPackIndex:: Use the multi-pack-index file to track multiple packfiles using a - single index. See link:technical/multi-pack-index.html[the - multi-pack-index design document]. + single index. See linkgit:git-multi-pack-index[1] for more + information. Defaults to true. core.sparseCheckout:: Enable "sparse checkout" feature. See linkgit:git-sparse-checkout[1] @@ -625,4 +625,6 @@ core.abbrev:: computed based on the approximate number of packed objects in your repository, which hopefully is enough for abbreviated object names to stay unique for some time. + If set to "no", no abbreviation is made and the object names + are shown in their full length. The minimum length is 4. diff --git a/Documentation/config/credential.txt b/Documentation/config/credential.txt index 9d01641c28..512f31876e 100644 --- a/Documentation/config/credential.txt +++ b/Documentation/config/credential.txt @@ -28,3 +28,9 @@ credential.<url>.*:: credentialCache.ignoreSIGHUP:: Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting. + +credentialStore.lockTimeoutMS:: + The length of time, in milliseconds, for git-credential-store to retry + when trying to lock the credentials file. Value 0 means not to retry at + all; -1 means to try indefinitely. Default is 1000 (i.e., retry for + 1s). diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index c3ae136eba..2d3331f55c 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -85,6 +85,8 @@ diff.ignoreSubmodules:: and 'git status' when `status.submoduleSummary` is set unless it is overridden by using the --ignore-submodules command-line option. The 'git submodule' commands are not affected by this setting. + By default this is set to untracked so that any untracked + submodules are ignored. diff.mnemonicPrefix:: If set, 'git diff' uses a prefix pair that is different from the diff --git a/Documentation/config/feature.txt b/Documentation/config/feature.txt index c0cbf2bb1c..cdecd04e5b 100644 --- a/Documentation/config/feature.txt +++ b/Documentation/config/feature.txt @@ -14,10 +14,6 @@ feature.experimental:: + * `fetch.negotiationAlgorithm=skipping` may improve fetch negotiation times by skipping more commits at a time, reducing the number of round trips. -+ -* `protocol.version=2` speeds up fetches from repositories with many refs by -allowing the client to specify which refs to list before the server lists -them. feature.manyFiles:: Enable config options that optimize for repos with many files in the diff --git a/Documentation/config/fetch.txt b/Documentation/config/fetch.txt index 6af6f5edb2..63748c02b7 100644 --- a/Documentation/config/fetch.txt +++ b/Documentation/config/fetch.txt @@ -69,7 +69,8 @@ fetch.negotiationAlgorithm:: setting defaults to "skipping". Unknown values will cause 'git fetch' to error out. + -See also the `--negotiation-tip` option for linkgit:git-fetch[1]. +See also the `--negotiate-only` and `--negotiation-tip` options to +linkgit:git-fetch[1]. fetch.showForcedUpdates:: Set to false to enable `--no-show-forced-updates` in diff --git a/Documentation/config/fmt-merge-msg.txt b/Documentation/config/fmt-merge-msg.txt index a8e8f74d0a..3fbf40e24f 100644 --- a/Documentation/config/fmt-merge-msg.txt +++ b/Documentation/config/fmt-merge-msg.txt @@ -13,7 +13,7 @@ merge.suppressDest:: By adding a glob that matches the names of integration branches to this multi-valued configuration variable, the default merge message computed for merges into these - integration branches will omit " into <branch name>" from + integration branches will omit "into <branch name>" from its title. + An element with an empty value can be used to clear the list diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt index 564e8091ba..fdbc06a4d2 100644 --- a/Documentation/config/format.txt +++ b/Documentation/config/format.txt @@ -79,7 +79,7 @@ format.thread:: format.signOff:: A boolean value which lets you enable the `-s/--signoff` option of - format-patch by default. *Note:* Adding the Signed-off-by: line to a + format-patch by default. *Note:* Adding the `Signed-off-by` trailer to a patch should be a conscious act and means that you certify you have the rights to submit this work under the same open source license. Please see the 'SubmittingPatches' document for further discussion. @@ -94,9 +94,16 @@ format.outputDirectory:: Set a custom directory to store the resulting files instead of the current working directory. All directory components will be created. +format.filenameMaxLength:: + The maximum length of the output filenames generated by the + `format-patch` command; defaults to 64. Can be overridden + by the `--filename-max-length=<n>` command line option. + format.useAutoBase:: A boolean value which lets you enable the `--base=auto` option of - format-patch by default. + format-patch by default. Can also be set to "whenAble" to allow + enabling `--base=auto` if a suitable base is available, but to skip + adding base info otherwise without the format dying. format.notes:: Provides the default value for the `--notes` option to diff --git a/Documentation/config/gc.txt b/Documentation/config/gc.txt index 00ea0a678e..c834e07991 100644 --- a/Documentation/config/gc.txt +++ b/Documentation/config/gc.txt @@ -44,9 +44,9 @@ gc.autoDetach:: gc.bigPackThreshold:: If non-zero, all packs larger than this limit are kept when - `git gc` is run. This is very similar to `--keep-base-pack` + `git gc` is run. This is very similar to `--keep-largest-pack` except that all packs that meet the threshold are kept, not - just the base pack. Defaults to zero. Common unit suffixes of + just the largest pack. Defaults to zero. Common unit suffixes of 'k', 'm', or 'g' are supported. + Note that if the number of kept packs is more than gc.autoPackLimit, @@ -57,7 +57,7 @@ gc.autoPackLimit and gc.bigPackThreshold should be respected again. If the amount of memory estimated for `git repack` to run smoothly is not available and `gc.bigPackThreshold` is not set, the largest pack will also be excluded (this is the equivalent of running `git gc` with -`--keep-base-pack`). +`--keep-largest-pack`). gc.writeCommitGraph:: If true, then gc will rewrite the commit-graph file when diff --git a/Documentation/config/help.txt b/Documentation/config/help.txt index 224bbf5a28..783a90a0f9 100644 --- a/Documentation/config/help.txt +++ b/Documentation/config/help.txt @@ -8,13 +8,14 @@ help.format:: the default. 'web' and 'html' are the same. help.autoCorrect:: - Automatically correct and execute mistyped commands after - waiting for the given number of deciseconds (0.1 sec). If more - than one command can be deduced from the entered text, nothing - will be executed. If the value of this option is negative, - the corrected command will be executed immediately. If the - value is 0 - the command will be just shown but not executed. - This is the default. + If git detects typos and can identify exactly one valid command similar + to the error, git will automatically run the intended command after + waiting a duration of time defined by this configuration value in + deciseconds (0.1 sec). If this value is 0, the suggested corrections + will be shown, but not executed. If it is a negative integer, or + "immediate", the suggested command + is run immediately. If "never", suggestions are not shown at all. The + default value is zero. help.htmlPath:: Specify the path where the HTML documentation resides. File system paths diff --git a/Documentation/config/http.txt b/Documentation/config/http.txt index 3968fbb697..7003661c0d 100644 --- a/Documentation/config/http.txt +++ b/Documentation/config/http.txt @@ -42,12 +42,12 @@ http.proxySSLKey:: http.proxySSLCertPasswordProtected:: Enable Git's password prompt for the proxy SSL certificate. Otherwise OpenSSL will prompt the user, possibly many times, if the certificate or private key - is encrypted. Can be overriden by the `GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED` + is encrypted. Can be overridden by the `GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED` environment variable. http.proxySSLCAInfo:: Pathname to the file containing the certificate bundle that should be used to - verify the proxy with when using an HTTPS proxy. Can be overriden by the + verify the proxy with when using an HTTPS proxy. Can be overridden by the `GIT_PROXY_SSL_CAINFO` environment variable. http.emptyAuth:: diff --git a/Documentation/config/index.txt b/Documentation/config/index.txt index 7cb50b37e9..75f3a2d105 100644 --- a/Documentation/config/index.txt +++ b/Documentation/config/index.txt @@ -14,6 +14,11 @@ index.recordOffsetTable:: Defaults to 'true' if index.threads has been explicitly enabled, 'false' otherwise. +index.sparse:: + When enabled, write the index using sparse-directory entries. This + has no effect unless `core.sparseCheckout` and + `core.sparseCheckoutCone` are both enabled. Defaults to 'false'. + index.threads:: Specifies the number of threads to spawn when loading the index. This is meant to reduce index load time on multiprocessor machines. diff --git a/Documentation/config/init.txt b/Documentation/config/init.txt index dc77f8c844..79c79d6617 100644 --- a/Documentation/config/init.txt +++ b/Documentation/config/init.txt @@ -4,4 +4,4 @@ init.templateDir:: init.defaultBranch:: Allows overriding the default branch name e.g. when initializing - a new repository or when cloning an empty repository. + a new repository. diff --git a/Documentation/config/log.txt b/Documentation/config/log.txt index 208d5fdcaa..456eb07800 100644 --- a/Documentation/config/log.txt +++ b/Documentation/config/log.txt @@ -24,6 +24,11 @@ log.excludeDecoration:: the config option can be overridden by the `--decorate-refs` option. +log.diffMerges:: + Set default diff format to be used for merge commits. See + `--diff-merges` in linkgit:git-log[1] for details. + Defaults to `separate`. + log.follow:: If `true`, `git log` will act as if the `--follow` option was used when a single <path> is given. This has the same limitations as `--follow`, diff --git a/Documentation/config/lsrefs.txt b/Documentation/config/lsrefs.txt new file mode 100644 index 0000000000..adeda0f24d --- /dev/null +++ b/Documentation/config/lsrefs.txt @@ -0,0 +1,9 @@ +lsrefs.unborn:: + May be "advertise" (the default), "allow", or "ignore". If "advertise", + the server will respond to the client sending "unborn" (as described in + protocol-v2.txt) and will advertise support for this feature during the + protocol v2 capability advertisement. "allow" is the same as + "advertise" except that the server will not advertise support for this + feature; this is useful for load-balanced servers that cannot be + updated atomically (for example), since the administrator could + configure "allow", then after a delay, configure "advertise". diff --git a/Documentation/config/maintenance.txt b/Documentation/config/maintenance.txt new file mode 100644 index 0000000000..18f0562131 --- /dev/null +++ b/Documentation/config/maintenance.txt @@ -0,0 +1,60 @@ +maintenance.auto:: + This boolean config option controls whether some commands run + `git maintenance run --auto` after doing their normal work. Defaults + to true. + +maintenance.strategy:: + This string config option provides a way to specify one of a few + recommended schedules for background maintenance. This only affects + which tasks are run during `git maintenance run --schedule=X` + commands, provided no `--task=<task>` arguments are provided. + Further, if a `maintenance.<task>.schedule` config value is set, + then that value is used instead of the one provided by + `maintenance.strategy`. The possible strategy strings are: ++ +* `none`: This default setting implies no task are run at any schedule. +* `incremental`: This setting optimizes for performing small maintenance + activities that do not delete any data. This does not schedule the `gc` + task, but runs the `prefetch` and `commit-graph` tasks hourly, the + `loose-objects` and `incremental-repack` tasks daily, and the `pack-refs` + task weekly. + +maintenance.<task>.enabled:: + This boolean config option controls whether the maintenance task + with name `<task>` is run when no `--task` option is specified to + `git maintenance run`. These config values are ignored if a + `--task` option exists. By default, only `maintenance.gc.enabled` + is true. + +maintenance.<task>.schedule:: + This config option controls whether or not the given `<task>` runs + during a `git maintenance run --schedule=<frequency>` command. The + value must be one of "hourly", "daily", or "weekly". + +maintenance.commit-graph.auto:: + This integer config option controls how often the `commit-graph` task + should be run as part of `git maintenance run --auto`. If zero, then + the `commit-graph` task will not run with the `--auto` option. A + negative value will force the task to run every time. Otherwise, a + positive value implies the command should run when the number of + reachable commits that are not in the commit-graph file is at least + the value of `maintenance.commit-graph.auto`. The default value is + 100. + +maintenance.loose-objects.auto:: + This integer config option controls how often the `loose-objects` task + should be run as part of `git maintenance run --auto`. If zero, then + the `loose-objects` task will not run with the `--auto` option. A + negative value will force the task to run every time. Otherwise, a + positive value implies the command should run when the number of + loose objects is at least the value of `maintenance.loose-objects.auto`. + The default value is 100. + +maintenance.incremental-repack.auto:: + This integer config option controls how often the `incremental-repack` + task should be run as part of `git maintenance run --auto`. If zero, + then the `incremental-repack` task will not run with the `--auto` + option. A negative value will force the task to run every time. + Otherwise, a positive value implies the command should run when the + number of pack-files not in the multi-pack-index is at least the value + of `maintenance.incremental-repack.auto`. The default value is 10. diff --git a/Documentation/config/merge.txt b/Documentation/config/merge.txt index cb2ed58907..6b66c83eab 100644 --- a/Documentation/config/merge.txt +++ b/Documentation/config/merge.txt @@ -14,7 +14,7 @@ merge.defaultToUpstream:: branches at the remote named by `branch.<current branch>.remote` are consulted, and then they are mapped via `remote.<remote>.fetch` to their corresponding remote-tracking branches, and the tips of - these tracking branches are merged. + these tracking branches are merged. Defaults to true. merge.ff:: By default, Git does not create an extra merge commit when merging diff --git a/Documentation/config/mergetool.txt b/Documentation/config/mergetool.txt index 09ed31dbfa..cafbbef46a 100644 --- a/Documentation/config/mergetool.txt +++ b/Documentation/config/mergetool.txt @@ -13,6 +13,11 @@ mergetool.<tool>.cmd:: merged; 'MERGED' contains the name of the file to which the merge tool should write the results of a successful merge. +mergetool.<tool>.hideResolved:: + Allows the user to override the global `mergetool.hideResolved` value + for a specific tool. See `mergetool.hideResolved` for the full + description. + mergetool.<tool>.trustExitCode:: For a custom merge command, specify whether the exit code of the merge command can be used to determine whether the merge was @@ -30,6 +35,26 @@ mergetool.meld.hasOutput:: to `true` tells Git to unconditionally use the `--output` option, and `false` avoids using `--output`. +mergetool.meld.useAutoMerge:: + When the `--auto-merge` is given, meld will merge all non-conflicting + parts automatically, highlight the conflicting parts and wait for + user decision. Setting `mergetool.meld.useAutoMerge` to `true` tells + Git to unconditionally use the `--auto-merge` option with `meld`. + Setting this value to `auto` makes git detect whether `--auto-merge` + is supported and will only use `--auto-merge` when available. A + value of `false` avoids using `--auto-merge` altogether, and is the + default value. + +mergetool.hideResolved:: + During a merge Git will automatically resolve as many conflicts as + possible and write the 'MERGED' file containing conflict markers around + any conflicts that it cannot resolve; 'LOCAL' and 'REMOTE' normally + represent the versions of the file from before Git's conflict + resolution. This flag causes 'LOCAL' and 'REMOTE' to be overwriten so + that only the unresolved conflicts are presented to the merge tool. Can + be configured per-tool via the `mergetool.<tool>.hideResolved` + configuration variable. Defaults to `false`. + mergetool.keepBackup:: After performing a merge, the original file with conflict markers can be saved as a file with a `.orig` extension. If this variable diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index 837f1b1679..763f7af7c4 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -99,12 +99,23 @@ pack.packSizeLimit:: packing to a file when repacking, i.e. the git:// protocol is unaffected. It can be overridden by the `--max-pack-size` option of linkgit:git-repack[1]. Reaching this limit results - in the creation of multiple packfiles; which in turn prevents - bitmaps from being created. - The minimum size allowed is limited to 1 MiB. - The default is unlimited. - Common unit suffixes of 'k', 'm', or 'g' are - supported. + in the creation of multiple packfiles. ++ +Note that this option is rarely useful, and may result in a larger total +on-disk size (because Git will not store deltas between packs), as well +as worse runtime performance (object lookup within multiple packs is +slower than a single pack, and optimizations like reachability bitmaps +cannot cope with multiple packs). ++ +If you need to actively run Git using smaller packfiles (e.g., because your +filesystem does not support large files), this option may help. But if +your goal is to transmit a packfile over a medium that supports limited +sizes (e.g., removable media that cannot store the whole repository), +you are likely better off creating a single large packfile and splitting +it using a generic multi-volume archive tool (e.g., Unix `split`). ++ +The minimum size allowed is limited to 1 MiB. The default is unlimited. +Common unit suffixes of 'k', 'm', or 'g' are supported. pack.useBitmaps:: When true, git will use pack bitmaps (if available) when packing @@ -122,6 +133,21 @@ pack.useSparse:: commits contain certain types of direct renames. Default is `true`. +pack.preferBitmapTips:: + When selecting which commits will receive bitmaps, prefer a + commit at the tip of any reference that is a suffix of any value + of this configuration over any other commits in the "selection + window". ++ +Note that setting this configuration to `refs/foo` does not mean that +the commits at the tips of `refs/foo/bar` and `refs/foo/baz` will +necessarily be selected. This is because commits are selected for +bitmaps from within a series of windows of variable length. ++ +If a commit at the tip of any reference which is a suffix of any value +of this configuration is seen in a window, it is immediately given +preference over any other commit in that window. + pack.writeBitmaps (deprecated):: This is a deprecated synonym for `repack.writeBitmaps`. @@ -133,3 +159,10 @@ pack.writeBitmapHashCache:: between an older, bitmapped pack and objects that have been pushed since the last gc). The downside is that it consumes 4 bytes per object of disk space. Defaults to true. + +pack.writeReverseIndex:: + When true, git will write a corresponding .rev file (see: + link:../technical/pack-format.html[Documentation/technical/pack-format.txt]) + for each new packfile that it writes in all places except for + linkgit:git-fast-import[1] and in the bulk checkin mechanism. + Defaults to false. diff --git a/Documentation/config/protocol.txt b/Documentation/config/protocol.txt index c46e9b3d00..756591d77b 100644 --- a/Documentation/config/protocol.txt +++ b/Documentation/config/protocol.txt @@ -48,8 +48,7 @@ protocol.version:: If set, clients will attempt to communicate with a server using the specified protocol version. If the server does not support it, communication falls back to version 0. - If unset, the default is `0`, unless `feature.experimental` - is enabled, in which case the default is `2`. + If unset, the default is `2`. Supported versions: + -- diff --git a/Documentation/config/push.txt b/Documentation/config/push.txt index f5e5b38c68..632033638c 100644 --- a/Documentation/config/push.txt +++ b/Documentation/config/push.txt @@ -24,15 +24,14 @@ push.default:: * `tracking` - This is a deprecated synonym for `upstream`. -* `simple` - in centralized workflow, work like `upstream` with an - added safety to refuse to push if the upstream branch's name is - different from the local one. +* `simple` - pushes the current branch with the same name on the remote. + -When pushing to a remote that is different from the remote you normally -pull from, work as `current`. This is the safest option and is suited -for beginners. +If you are working on a centralized workflow (pushing to the same repository you +pull from, which is typically `origin`), then you need to configure an upstream +branch with the same name. + -This mode has become the default in Git 2.0. +This mode is the default since Git 2.0, and is the safest option suited for +beginners. * `matching` - push all branches having the same name on both ends. This makes the repository you are pushing to remember the set of @@ -114,3 +113,16 @@ push.recurseSubmodules:: specifying '--recurse-submodules=check|on-demand|no'. If not set, 'no' is used by default, unless 'submodule.recurse' is set (in which case a 'true' value means 'on-demand'). + +push.useForceIfIncludes:: + If set to "true", it is equivalent to specifying + `--force-if-includes` as an option to linkgit:git-push[1] + in the command line. Adding `--no-force-if-includes` at the + time of push overrides this configuration setting. + +push.negotiate:: + If set to "true", attempt to reduce the size of the packfile + sent by rounds of negotiation in which the client and the + server attempt to find commits in common. If "false", Git will + rely solely on the server's ref advertisement to find commits + in common. diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt index 7f7a07d22f..8c979cb20f 100644 --- a/Documentation/config/rebase.txt +++ b/Documentation/config/rebase.txt @@ -1,10 +1,3 @@ -rebase.useBuiltin:: - Unused configuration variable. Used in Git versions 2.20 and - 2.21 as an escape hatch to enable the legacy shellscript - implementation of rebase. Now the built-in rewrite of it in C - is always used. Setting this will emit a warning, to alert any - remaining users that setting this now does nothing. - rebase.backend:: Default backend to use for rebasing. Possible choices are 'apply' or 'merge'. In the future, if the merge backend gains @@ -68,3 +61,6 @@ rebase.rescheduleFailedExec:: Automatically reschedule `exec` commands that failed. This only makes sense in interactive mode (or when an `--exec` option was provided). This is the same as specifying the `--reschedule-failed-exec` option. + +rebase.forkPoint:: + If set to false set `--no-fork-point` option by default. diff --git a/Documentation/config/receive.txt b/Documentation/config/receive.txt index 65f78aac37..85d5b5a3d2 100644 --- a/Documentation/config/receive.txt +++ b/Documentation/config/receive.txt @@ -114,6 +114,28 @@ receive.hideRefs:: An attempt to update or delete a hidden ref by `git push` is rejected. +receive.procReceiveRefs:: + This is a multi-valued variable that defines reference prefixes + to match the commands in `receive-pack`. Commands matching the + prefixes will be executed by an external hook "proc-receive", + instead of the internal `execute_commands` function. If this + variable is not defined, the "proc-receive" hook will never be + used, and all commands will be executed by the internal + `execute_commands` function. ++ +For example, if this variable is set to "refs/for", pushing to reference +such as "refs/for/master" will not create or update a reference named +"refs/for/master", but may create or update a pull request directly by +running the hook "proc-receive". ++ +Optional modifiers can be provided in the beginning of the value to filter +commands for specific actions: create (a), modify (m), delete (d). +A `!` can be included in the modifiers to negate the reference prefix entry. +E.g.: ++ + git config --system --add receive.procReceiveRefs ad:refs/heads + git config --system --add receive.procReceiveRefs !:refs/heads + receive.updateServerInfo:: If set to true, git-receive-pack will run git-update-server-info after receiving data from git-push and updating refs. diff --git a/Documentation/config/sendemail.txt b/Documentation/config/sendemail.txt index cbc5af42fd..50baa5d6bf 100644 --- a/Documentation/config/sendemail.txt +++ b/Documentation/config/sendemail.txt @@ -8,9 +8,6 @@ sendemail.smtpEncryption:: See linkgit:git-send-email[1] for description. Note that this setting is not subject to the 'identity' mechanism. -sendemail.smtpssl (deprecated):: - Deprecated alias for 'sendemail.smtpEncryption = ssl'. - sendemail.smtpsslcertpath:: Path to ca-certificates (either a directory or a single file). Set it to an empty string to disable certificate verification. diff --git a/Documentation/config/stash.txt b/Documentation/config/stash.txt index 00eb35434e..9ed775281f 100644 --- a/Documentation/config/stash.txt +++ b/Documentation/config/stash.txt @@ -5,6 +5,11 @@ stash.useBuiltin:: is always used. Setting this will emit a warning, to alert any remaining users that setting this now does nothing. +stash.showIncludeUntracked:: + If this is set to true, the `git stash show` command will show + the untracked files of a stash entry. Defaults to false. See + description of 'show' command in linkgit:git-stash[1]. + stash.showPatch:: If this is set to true, the `git stash show` command without an option will show the stash entry in patch form. Defaults to false. diff --git a/Documentation/config/trace2.txt b/Documentation/config/trace2.txt index 01d3afd8a8..fe1642f0d4 100644 --- a/Documentation/config/trace2.txt +++ b/Documentation/config/trace2.txt @@ -54,7 +54,7 @@ trace2.envVars:: `GIT_HTTP_USER_AGENT,GIT_CONFIG` would cause the trace2 output to contain events listing the overrides for HTTP user agent and the location of the Git configuration file (assuming any are set). May be - overriden by the `GIT_TRACE2_ENV_VARS` environment variable. Unset by + overridden by the `GIT_TRACE2_ENV_VARS` environment variable. Unset by default. trace2.destinationDebug:: diff --git a/Documentation/config/transfer.txt b/Documentation/config/transfer.txt index f5b6245270..505126a780 100644 --- a/Documentation/config/transfer.txt +++ b/Documentation/config/transfer.txt @@ -69,3 +69,7 @@ transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are not set, the value of this variable is used instead. The default value is 100. + +transfer.advertiseSID:: + Boolean. When true, client and server processes will advertise their + unique session IDs to their remote counterpart. Defaults to false. diff --git a/Documentation/config/uploadpack.txt b/Documentation/config/uploadpack.txt index ee7b3ac94f..32fad5bbe8 100644 --- a/Documentation/config/uploadpack.txt +++ b/Documentation/config/uploadpack.txt @@ -59,18 +59,19 @@ uploadpack.allowFilter:: uploadpackfilter.allow:: Provides a default value for unspecified object filters (see: the - below configuration variable). + below configuration variable). If set to `true`, this will also + enable all filters which get added in the future. Defaults to `true`. uploadpackfilter.<filter>.allow:: Explicitly allow or ban the object filter corresponding to `<filter>`, where `<filter>` may be one of: `blob:none`, - `blob:limit`, `tree`, `sparse:oid`, or `combine`. If using - combined filters, both `combine` and all of the nested filter - kinds must be allowed. Defaults to `uploadpackfilter.allow`. + `blob:limit`, `object:type`, `tree`, `sparse:oid`, or `combine`. + If using combined filters, both `combine` and all of the nested + filter kinds must be allowed. Defaults to `uploadpackfilter.allow`. uploadpackfilter.tree.maxDepth:: - Only allow `--filter=tree=<n>` when `n` is no more than the value of + Only allow `--filter=tree:<n>` when `<n>` is no more than the value of `uploadpackfilter.tree.maxDepth`. If set, this also implies `uploadpackfilter.tree.allow=true`, unless this configuration variable had already been set. Has no effect if unset. |