diff options
Diffstat (limited to 'Documentation/config')
26 files changed, 188 insertions, 57 deletions
diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index acbd0c09aa..063eec2511 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -44,6 +44,9 @@ advice.*:: Shown when linkgit:git-push[1] rejects a forced update of a branch when its remote-tracking ref has updates that we do not have locally. + skippedCherryPicks:: + Shown when linkgit:git-rebase[1] skips a commit that has already + been cherry-picked onto the upstream branch. statusAheadBehind:: Shown when linkgit:git-status[1] computes the ahead/behind counts for a local ref compared to its remote tracking ref, @@ -119,4 +122,8 @@ advice.*:: addEmptyPathspec:: Advice shown if a user runs the add command without providing the pathspec parameter. + updateSparsePath:: + Advice shown when either linkgit:git-add[1] or linkgit:git-rm[1] + is asked to update index entries outside the current sparse + checkout. -- diff --git a/Documentation/config/blame.txt b/Documentation/config/blame.txt index 9468e8599c..4d047c1790 100644 --- a/Documentation/config/blame.txt +++ b/Documentation/config/blame.txt @@ -27,7 +27,7 @@ blame.ignoreRevsFile:: file names will reset the list of ignored revisions. This option will be handled before the command line option `--ignore-revs-file`. -blame.markUnblamables:: +blame.markUnblamableLines:: Mark lines that were changed by an ignored revision that we could not attribute to another commit with a '*' in the output of linkgit:git-blame[1]. diff --git a/Documentation/config/checkout.txt b/Documentation/config/checkout.txt index 2cddf7b4b4..bfbca90f0e 100644 --- a/Documentation/config/checkout.txt +++ b/Documentation/config/checkout.txt @@ -21,3 +21,24 @@ checkout.guess:: Provides the default value for the `--guess` or `--no-guess` option in `git checkout` and `git switch`. See linkgit:git-switch[1] and linkgit:git-checkout[1]. + +checkout.workers:: + The number of parallel workers to use when updating the working tree. + The default is one, i.e. sequential execution. If set to a value less + than one, Git will use as many workers as the number of logical cores + available. This setting and `checkout.thresholdForParallelism` affect + all commands that perform checkout. E.g. checkout, clone, reset, + sparse-checkout, etc. ++ +Note: parallel checkout usually delivers better performance for repositories +located on SSDs or over NFS. For repositories on spinning disks and/or machines +with a small number of cores, the default sequential checkout often performs +better. The size and compression level of a repository might also influence how +well the parallel version performs. + +checkout.thresholdForParallelism:: + When running parallel checkout with a small number of files, the cost + of subprocess spawning and inter-process communication might outweigh + the parallelization gains. This setting allows to define the minimum + number of files for which parallel checkout should be attempted. The + default is 100. diff --git a/Documentation/config/clone.txt b/Documentation/config/clone.txt index 47de36a5fe..7bcfbd18a5 100644 --- a/Documentation/config/clone.txt +++ b/Documentation/config/clone.txt @@ -2,3 +2,7 @@ clone.defaultRemoteName:: The name of the remote to create when cloning a repository. Defaults to `origin`, and can be overridden by passing the `--origin` command-line option to linkgit:git-clone[1]. + +clone.rejectShallow:: + Reject to clone a repository if it is a shallow one, can be overridden by + passing option `--reject-shallow` in command line. See linkgit:git-clone[1] diff --git a/Documentation/config/color.txt b/Documentation/config/color.txt index d5daacb13a..e05d520a86 100644 --- a/Documentation/config/color.txt +++ b/Documentation/config/color.txt @@ -127,8 +127,9 @@ color.interactive.<slot>:: interactive commands. color.pager:: - A boolean to enable/disable colored output when the pager is in - use (default is true). + A boolean to specify whether `auto` color modes should colorize + output going to the pager. Defaults to true; set this to false + if your pager does not understand ANSI color codes. color.push:: A boolean to enable/disable color in push errors. May be set to diff --git a/Documentation/config/commitgraph.txt b/Documentation/config/commitgraph.txt index 4582c39fc4..30604e4a4c 100644 --- a/Documentation/config/commitgraph.txt +++ b/Documentation/config/commitgraph.txt @@ -1,3 +1,9 @@ +commitGraph.generationVersion:: + Specifies the type of generation number version to use when writing + or reading the commit-graph file. If version 1 is specified, then + the corrected commit dates will not be written or read. Defaults to + 2. + commitGraph.maxNewFilters:: Specifies the default value for the `--max-new-filters` option of `git commit-graph write` (c.f., linkgit:git-commit-graph[1]). diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index 160aacad84..c04f62a54a 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -625,4 +625,6 @@ core.abbrev:: computed based on the approximate number of packed objects in your repository, which hopefully is enough for abbreviated object names to stay unique for some time. + If set to "no", no abbreviation is made and the object names + are shown in their full length. The minimum length is 4. diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index c3ae136eba..32f84838ac 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -85,6 +85,8 @@ diff.ignoreSubmodules:: and 'git status' when `status.submoduleSummary` is set unless it is overridden by using the --ignore-submodules command-line option. The 'git submodule' commands are not affected by this setting. + By default this is set to untracked so that any untracked + submodules are ignored. diff.mnemonicPrefix:: If set, 'git diff' uses a prefix pair that is different from the @@ -116,9 +118,10 @@ diff.orderFile:: relative to the top of the working tree. diff.renameLimit:: - The number of files to consider when performing the copy/rename - detection; equivalent to the 'git diff' option `-l`. This setting - has no effect if rename detection is turned off. + The number of files to consider in the exhaustive portion of + copy/rename detection; equivalent to the 'git diff' option + `-l`. If not set, the default value is currently 1000. This + setting has no effect if rename detection is turned off. diff.renames:: Whether and how Git detects renames. If set to "false", diff --git a/Documentation/config/fetch.txt b/Documentation/config/fetch.txt index 6af6f5edb2..63748c02b7 100644 --- a/Documentation/config/fetch.txt +++ b/Documentation/config/fetch.txt @@ -69,7 +69,8 @@ fetch.negotiationAlgorithm:: setting defaults to "skipping". Unknown values will cause 'git fetch' to error out. + -See also the `--negotiation-tip` option for linkgit:git-fetch[1]. +See also the `--negotiate-only` and `--negotiation-tip` options to +linkgit:git-fetch[1]. fetch.showForcedUpdates:: Set to false to enable `--no-show-forced-updates` in diff --git a/Documentation/config/gui.txt b/Documentation/config/gui.txt index d30831a130..0c087fd8c9 100644 --- a/Documentation/config/gui.txt +++ b/Documentation/config/gui.txt @@ -11,7 +11,7 @@ gui.displayUntracked:: in the file list. The default is "true". gui.encoding:: - Specifies the default encoding to use for displaying of + Specifies the default character encoding to use for displaying of file contents in linkgit:git-gui[1] and linkgit:gitk[1]. It can be overridden by setting the 'encoding' attribute for relevant files (see linkgit:gitattributes[5]). diff --git a/Documentation/config/help.txt b/Documentation/config/help.txt index 783a90a0f9..610701f9a3 100644 --- a/Documentation/config/help.txt +++ b/Documentation/config/help.txt @@ -9,13 +9,15 @@ help.format:: help.autoCorrect:: If git detects typos and can identify exactly one valid command similar - to the error, git will automatically run the intended command after - waiting a duration of time defined by this configuration value in - deciseconds (0.1 sec). If this value is 0, the suggested corrections - will be shown, but not executed. If it is a negative integer, or - "immediate", the suggested command - is run immediately. If "never", suggestions are not shown at all. The - default value is zero. + to the error, git will try to suggest the correct command or even + run the suggestion automatically. Possible config values are: + - 0 (default): show the suggested command. + - positive number: run the suggested command after specified +deciseconds (0.1 sec). + - "immediate": run the suggested command immediately. + - "prompt": show the suggestion and prompt for confirmation to run +the command. + - "never": don't run or show any suggested command. help.htmlPath:: Specify the path where the HTML documentation resides. File system paths diff --git a/Documentation/config/index.txt b/Documentation/config/index.txt index 7cb50b37e9..75f3a2d105 100644 --- a/Documentation/config/index.txt +++ b/Documentation/config/index.txt @@ -14,6 +14,11 @@ index.recordOffsetTable:: Defaults to 'true' if index.threads has been explicitly enabled, 'false' otherwise. +index.sparse:: + When enabled, write the index using sparse-directory entries. This + has no effect unless `core.sparseCheckout` and + `core.sparseCheckoutCone` are both enabled. Defaults to 'false'. + index.threads:: Specifies the number of threads to spawn when loading the index. This is meant to reduce index load time on multiprocessor machines. diff --git a/Documentation/config/init.txt b/Documentation/config/init.txt index dc77f8c844..79c79d6617 100644 --- a/Documentation/config/init.txt +++ b/Documentation/config/init.txt @@ -4,4 +4,4 @@ init.templateDir:: init.defaultBranch:: Allows overriding the default branch name e.g. when initializing - a new repository or when cloning an empty repository. + a new repository. diff --git a/Documentation/config/log.txt b/Documentation/config/log.txt index 208d5fdcaa..456eb07800 100644 --- a/Documentation/config/log.txt +++ b/Documentation/config/log.txt @@ -24,6 +24,11 @@ log.excludeDecoration:: the config option can be overridden by the `--decorate-refs` option. +log.diffMerges:: + Set default diff format to be used for merge commits. See + `--diff-merges` in linkgit:git-log[1] for details. + Defaults to `separate`. + log.follow:: If `true`, `git log` will act as if the `--follow` option was used when a single <path> is given. This has the same limitations as `--follow`, diff --git a/Documentation/config/lsrefs.txt b/Documentation/config/lsrefs.txt new file mode 100644 index 0000000000..adeda0f24d --- /dev/null +++ b/Documentation/config/lsrefs.txt @@ -0,0 +1,9 @@ +lsrefs.unborn:: + May be "advertise" (the default), "allow", or "ignore". If "advertise", + the server will respond to the client sending "unborn" (as described in + protocol-v2.txt) and will advertise support for this feature during the + protocol v2 capability advertisement. "allow" is the same as + "advertise" except that the server will not advertise support for this + feature; this is useful for load-balanced servers that cannot be + updated atomically (for example), since the administrator could + configure "allow", then after a delay, configure "advertise". diff --git a/Documentation/config/maintenance.txt b/Documentation/config/maintenance.txt index a5ead09e4b..18f0562131 100644 --- a/Documentation/config/maintenance.txt +++ b/Documentation/config/maintenance.txt @@ -15,8 +15,9 @@ maintenance.strategy:: * `none`: This default setting implies no task are run at any schedule. * `incremental`: This setting optimizes for performing small maintenance activities that do not delete any data. This does not schedule the `gc` - task, but runs the `prefetch` and `commit-graph` tasks hourly and the - `loose-objects` and `incremental-repack` tasks daily. + task, but runs the `prefetch` and `commit-graph` tasks hourly, the + `loose-objects` and `incremental-repack` tasks daily, and the `pack-refs` + task weekly. maintenance.<task>.enabled:: This boolean config option controls whether the maintenance task diff --git a/Documentation/config/merge.txt b/Documentation/config/merge.txt index cb2ed58907..e27cc63944 100644 --- a/Documentation/config/merge.txt +++ b/Documentation/config/merge.txt @@ -14,7 +14,7 @@ merge.defaultToUpstream:: branches at the remote named by `branch.<current branch>.remote` are consulted, and then they are mapped via `remote.<remote>.fetch` to their corresponding remote-tracking branches, and the tips of - these tracking branches are merged. + these tracking branches are merged. Defaults to true. merge.ff:: By default, Git does not create an extra merge commit when merging @@ -33,10 +33,12 @@ merge.verifySignatures:: include::fmt-merge-msg.txt[] merge.renameLimit:: - The number of files to consider when performing rename detection - during a merge; if not specified, defaults to the value of - diff.renameLimit. This setting has no effect if rename detection - is turned off. + The number of files to consider in the exhaustive portion of + rename detection during a merge. If not specified, defaults + to the value of diff.renameLimit. If neither + merge.renameLimit nor diff.renameLimit are specified, + currently defaults to 7000. This setting has no effect if + rename detection is turned off. merge.renames:: Whether Git detects renames. If set to "false", rename detection diff --git a/Documentation/config/mergetool.txt b/Documentation/config/mergetool.txt index 16a27443a3..cafbbef46a 100644 --- a/Documentation/config/mergetool.txt +++ b/Documentation/config/mergetool.txt @@ -13,6 +13,11 @@ mergetool.<tool>.cmd:: merged; 'MERGED' contains the name of the file to which the merge tool should write the results of a successful merge. +mergetool.<tool>.hideResolved:: + Allows the user to override the global `mergetool.hideResolved` value + for a specific tool. See `mergetool.hideResolved` for the full + description. + mergetool.<tool>.trustExitCode:: For a custom merge command, specify whether the exit code of the merge command can be used to determine whether the merge was @@ -40,6 +45,16 @@ mergetool.meld.useAutoMerge:: value of `false` avoids using `--auto-merge` altogether, and is the default value. +mergetool.hideResolved:: + During a merge Git will automatically resolve as many conflicts as + possible and write the 'MERGED' file containing conflict markers around + any conflicts that it cannot resolve; 'LOCAL' and 'REMOTE' normally + represent the versions of the file from before Git's conflict + resolution. This flag causes 'LOCAL' and 'REMOTE' to be overwriten so + that only the unresolved conflicts are presented to the merge tool. Can + be configured per-tool via the `mergetool.<tool>.hideResolved` + configuration variable. Defaults to `false`. + mergetool.keepBackup:: After performing a merge, the original file with conflict markers can be saved as a file with a `.orig` extension. If this variable diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index 837f1b1679..ad7f73a1ea 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -99,12 +99,23 @@ pack.packSizeLimit:: packing to a file when repacking, i.e. the git:// protocol is unaffected. It can be overridden by the `--max-pack-size` option of linkgit:git-repack[1]. Reaching this limit results - in the creation of multiple packfiles; which in turn prevents - bitmaps from being created. - The minimum size allowed is limited to 1 MiB. - The default is unlimited. - Common unit suffixes of 'k', 'm', or 'g' are - supported. + in the creation of multiple packfiles. ++ +Note that this option is rarely useful, and may result in a larger total +on-disk size (because Git will not store deltas between packs), as well +as worse runtime performance (object lookup within multiple packs is +slower than a single pack, and optimizations like reachability bitmaps +cannot cope with multiple packs). ++ +If you need to actively run Git using smaller packfiles (e.g., because your +filesystem does not support large files), this option may help. But if +your goal is to transmit a packfile over a medium that supports limited +sizes (e.g., removable media that cannot store the whole repository), +you are likely better off creating a single large packfile and splitting +it using a generic multi-volume archive tool (e.g., Unix `split`). ++ +The minimum size allowed is limited to 1 MiB. The default is unlimited. +Common unit suffixes of 'k', 'm', or 'g' are supported. pack.useBitmaps:: When true, git will use pack bitmaps (if available) when packing @@ -122,6 +133,21 @@ pack.useSparse:: commits contain certain types of direct renames. Default is `true`. +pack.preferBitmapTips:: + When selecting which commits will receive bitmaps, prefer a + commit at the tip of any reference that is a suffix of any value + of this configuration over any other commits in the "selection + window". ++ +Note that setting this configuration to `refs/foo` does not mean that +the commits at the tips of `refs/foo/bar` and `refs/foo/baz` will +necessarily be selected. This is because commits are selected for +bitmaps from within a series of windows of variable length. ++ +If a commit at the tip of any reference which is a suffix of any value +of this configuration is seen in a window, it is immediately given +preference over any other commit in that window. + pack.writeBitmaps (deprecated):: This is a deprecated synonym for `repack.writeBitmaps`. @@ -133,3 +159,14 @@ pack.writeBitmapHashCache:: between an older, bitmapped pack and objects that have been pushed since the last gc). The downside is that it consumes 4 bytes per object of disk space. Defaults to true. ++ +When writing a multi-pack reachability bitmap, no new namehashes are +computed; instead, any namehashes stored in an existing bitmap are +permuted into their appropriate location when writing a new bitmap. + +pack.writeReverseIndex:: + When true, git will write a corresponding .rev file (see: + link:../technical/pack-format.html[Documentation/technical/pack-format.txt]) + for each new packfile that it writes in all places except for + linkgit:git-fast-import[1] and in the bulk checkin mechanism. + Defaults to false. diff --git a/Documentation/config/push.txt b/Documentation/config/push.txt index 21b256e0a4..632033638c 100644 --- a/Documentation/config/push.txt +++ b/Documentation/config/push.txt @@ -24,15 +24,14 @@ push.default:: * `tracking` - This is a deprecated synonym for `upstream`. -* `simple` - in centralized workflow, work like `upstream` with an - added safety to refuse to push if the upstream branch's name is - different from the local one. +* `simple` - pushes the current branch with the same name on the remote. + -When pushing to a remote that is different from the remote you normally -pull from, work as `current`. This is the safest option and is suited -for beginners. +If you are working on a centralized workflow (pushing to the same repository you +pull from, which is typically `origin`), then you need to configure an upstream +branch with the same name. + -This mode has become the default in Git 2.0. +This mode is the default since Git 2.0, and is the safest option suited for +beginners. * `matching` - push all branches having the same name on both ends. This makes the repository you are pushing to remember the set of @@ -120,3 +119,10 @@ push.useForceIfIncludes:: `--force-if-includes` as an option to linkgit:git-push[1] in the command line. Adding `--no-force-if-includes` at the time of push overrides this configuration setting. + +push.negotiate:: + If set to "true", attempt to reduce the size of the packfile + sent by rounds of negotiation in which the client and the + server attempt to find commits in common. If "false", Git will + rely solely on the server's ref advertisement to find commits + in common. diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt index 7f7a07d22f..8c979cb20f 100644 --- a/Documentation/config/rebase.txt +++ b/Documentation/config/rebase.txt @@ -1,10 +1,3 @@ -rebase.useBuiltin:: - Unused configuration variable. Used in Git versions 2.20 and - 2.21 as an escape hatch to enable the legacy shellscript - implementation of rebase. Now the built-in rewrite of it in C - is always used. Setting this will emit a warning, to alert any - remaining users that setting this now does nothing. - rebase.backend:: Default backend to use for rebasing. Possible choices are 'apply' or 'merge'. In the future, if the merge backend gains @@ -68,3 +61,6 @@ rebase.rescheduleFailedExec:: Automatically reschedule `exec` commands that failed. This only makes sense in interactive mode (or when an `--exec` option was provided). This is the same as specifying the `--reschedule-failed-exec` option. + +rebase.forkPoint:: + If set to false set `--no-fork-point` option by default. diff --git a/Documentation/config/sendemail.txt b/Documentation/config/sendemail.txt index cbc5af42fd..50baa5d6bf 100644 --- a/Documentation/config/sendemail.txt +++ b/Documentation/config/sendemail.txt @@ -8,9 +8,6 @@ sendemail.smtpEncryption:: See linkgit:git-send-email[1] for description. Note that this setting is not subject to the 'identity' mechanism. -sendemail.smtpssl (deprecated):: - Deprecated alias for 'sendemail.smtpEncryption = ssl'. - sendemail.smtpsslcertpath:: Path to ca-certificates (either a directory or a single file). Set it to an empty string to disable certificate verification. diff --git a/Documentation/config/stash.txt b/Documentation/config/stash.txt index 00eb35434e..9ed775281f 100644 --- a/Documentation/config/stash.txt +++ b/Documentation/config/stash.txt @@ -5,6 +5,11 @@ stash.useBuiltin:: is always used. Setting this will emit a warning, to alert any remaining users that setting this now does nothing. +stash.showIncludeUntracked:: + If this is set to true, the `git stash show` command will show + the untracked files of a stash entry. Defaults to false. See + description of 'show' command in linkgit:git-stash[1]. + stash.showPatch:: If this is set to true, the `git stash show` command without an option will show the stash entry in patch form. Defaults to false. diff --git a/Documentation/config/submodule.txt b/Documentation/config/submodule.txt index d7a63c8c12..ee454f8126 100644 --- a/Documentation/config/submodule.txt +++ b/Documentation/config/submodule.txt @@ -58,8 +58,9 @@ submodule.active:: commands. See linkgit:gitsubmodules[7] for details. submodule.recurse:: - Specifies if commands recurse into submodules by default. This - applies to all commands that have a `--recurse-submodules` option + A boolean indicating if commands should enable the `--recurse-submodules` + option by default. + Applies to all commands that support this option (`checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, `reset`, `restore` and `switch`) except `clone` and `ls-files`. Defaults to false. diff --git a/Documentation/config/transfer.txt b/Documentation/config/transfer.txt index 505126a780..b49429eb4d 100644 --- a/Documentation/config/transfer.txt +++ b/Documentation/config/transfer.txt @@ -52,13 +52,17 @@ If you have multiple hideRefs values, later entries override earlier ones (and entries in more-specific config files override less-specific ones). + If a namespace is in use, the namespace prefix is stripped from each -reference before it is matched against `transfer.hiderefs` patterns. +reference before it is matched against `transfer.hiderefs` patterns. In +order to match refs before stripping, add a `^` in front of the ref name. If +you combine `!` and `^`, `!` must be specified first. ++ For example, if `refs/heads/master` is specified in `transfer.hideRefs` and the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master` -is omitted from the advertisements but `refs/heads/master` and -`refs/namespaces/bar/refs/heads/master` are still advertised as so-called -"have" lines. In order to match refs before stripping, add a `^` in front of -the ref name. If you combine `!` and `^`, `!` must be specified first. +is omitted from the advertisements. If `uploadpack.allowRefInWant` is set, +`upload-pack` will treat `want-ref refs/heads/master` in a protocol v2 +`fetch` command as if `refs/namespaces/foo/refs/heads/master` did not exist. +`receive-pack`, on the other hand, will still advertise the object id the +ref is pointing to without mentioning its name (a so-called ".have" line). + Even if you hide refs, a client may still be able to steal the target objects via the techniques described in the "SECURITY" section of the diff --git a/Documentation/config/uploadpack.txt b/Documentation/config/uploadpack.txt index b0d761282c..32fad5bbe8 100644 --- a/Documentation/config/uploadpack.txt +++ b/Documentation/config/uploadpack.txt @@ -59,15 +59,16 @@ uploadpack.allowFilter:: uploadpackfilter.allow:: Provides a default value for unspecified object filters (see: the - below configuration variable). + below configuration variable). If set to `true`, this will also + enable all filters which get added in the future. Defaults to `true`. uploadpackfilter.<filter>.allow:: Explicitly allow or ban the object filter corresponding to `<filter>`, where `<filter>` may be one of: `blob:none`, - `blob:limit`, `tree`, `sparse:oid`, or `combine`. If using - combined filters, both `combine` and all of the nested filter - kinds must be allowed. Defaults to `uploadpackfilter.allow`. + `blob:limit`, `object:type`, `tree`, `sparse:oid`, or `combine`. + If using combined filters, both `combine` and all of the nested + filter kinds must be allowed. Defaults to `uploadpackfilter.allow`. uploadpackfilter.tree.maxDepth:: Only allow `--filter=tree:<n>` when `<n>` is no more than the value of |