diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 108 |
1 files changed, 83 insertions, 25 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index 1029bc46ca..e75434b3ef 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -196,20 +196,17 @@ core.quotepath:: quoted without `-z` regardless of the setting of this variable. -core.autocrlf:: - If true, makes git convert `CRLF` at the end of lines in text files to - `LF` when reading from the work tree, and convert in reverse when - writing to the work tree. The variable can be set to - 'input', in which case the conversion happens only while - reading from the work tree but files are written out to the work - tree with `LF` at the end of lines. A file is considered - "text" (i.e. be subjected to the autocrlf mechanism) based on - the file's `crlf` attribute, or if `crlf` is unspecified, - based on the file's contents. See linkgit:gitattributes[5]. +core.eol:: + Sets the line ending type to use in the working directory for + files that have the `text` property set. Alternatives are + 'lf', 'crlf' and 'native', which uses the platform's native + line ending. The default value is `native`. See + linkgit:gitattributes[5] for more information on end-of-line + conversion. core.safecrlf:: - If true, makes git check if converting `CRLF` as controlled by - `core.autocrlf` is reversible. Git will verify if a command + If true, makes git check if converting `CRLF` is reversible when + end-of-line conversion is active. Git will verify if a command modifies a file in the work tree either directly or indirectly. For example, committing a file followed by checking out the same file should yield the original file in the work tree. If @@ -219,7 +216,7 @@ core.safecrlf:: irreversible conversion but continue the operation. + CRLF conversion bears a slight chance of corrupting data. -autocrlf=true will convert CRLF to LF during commit and LF to +When it is enabled, git will convert CRLF to LF during commit and LF to CRLF during checkout. A file that contains a mixture of LF and CRLF before the commit cannot be recreated by git. For text files this is the right thing to do: it corrects line endings @@ -243,15 +240,25 @@ converting CRLFs corrupts data. + Note, this safety check does not mean that a checkout will generate a file identical to the original file for a different setting of -`core.autocrlf`, but only for the current one. For example, a text -file with `LF` would be accepted with `core.autocrlf=input` and could -later be checked out with `core.autocrlf=true`, in which case the +`core.eol` and `core.autocrlf`, but only for the current one. For +example, a text file with `LF` would be accepted with `core.eol=lf` +and could later be checked out with `core.eol=crlf`, in which case the resulting file would contain `CRLF`, although the original file contained `LF`. However, in both work trees the line endings would be consistent, that is either all `LF` or all `CRLF`, but never mixed. A file with mixed line endings would be reported by the `core.safecrlf` mechanism. +core.autocrlf:: + Setting this variable to "true" is almost the same as setting + the `text` attribute to "auto" on all files except that text + files are not guaranteed to be normalized: files that contain + `CRLF` in the repository will not be touched. Use this + setting if you want to have `CRLF` line endings in your + working directory even though the repository does not have + normalized line endings. This variable can be set to 'input', + in which case no output conversion is performed. + core.symlinks:: If false, symbolic links are checked out as small plain files that contain the link text. linkgit:git-update-index[1] and @@ -481,6 +488,8 @@ core.whitespace:: error (enabled by default). * `indent-with-non-tab` treats a line that is indented with 8 or more space characters as an error (not enabled by default). +* `tab-in-indent` treats a tab character in the initial indent part of + the line as an error (not enabled by default). * `blank-at-eof` treats blank lines added at the end of file as an error (enabled by default). * `trailing-space` is a short-hand to cover both `blank-at-eol` and @@ -681,6 +690,11 @@ color.diff.<slot>:: (highlighting whitespace errors). The values of these variables may be specified as in color.branch.<slot>. +color.decorate.<slot>:: + Use customized color for 'git log --decorate' output. `<slot>` is one + of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local + branches, remote tracking branches, tags, stash and HEAD, respectively. + color.grep:: When set to `always`, always highlight matches. When `false` (or `never`), never. When set to `true` or `auto`, use color only @@ -790,6 +804,8 @@ diff.mnemonicprefix:: standard "a/" and "b/" depending on what is being compared. When this configuration is in effect, reverse diff output also swaps the order of the prefixes: +diff.noprefix:: + If set, 'git diff' does not show any source or destination prefix. `git diff`;; compares the (i)ndex and the (w)ork tree; `git diff HEAD`;; @@ -880,6 +896,12 @@ format.subjectprefix:: The default for format-patch is to output files with the '[PATCH]' subject prefix. Use this variable to change that prefix. +format.signature:: + The default for format-patch is to output a signature containing + the git version number. Use this variable to change that default. + Set this variable to the empty string ("") to suppress + signature generation. + format.suffix:: The default for format-patch is to output files with the suffix `.patch`. Use this variable to change that suffix (make sure to @@ -940,13 +962,19 @@ gc.pruneexpire:: unreachable objects immediately. gc.reflogexpire:: +gc.<pattern>.reflogexpire:: 'git reflog expire' removes reflog entries older than - this time; defaults to 90 days. + this time; defaults to 90 days. With "<pattern>" (e.g. + "refs/stash") in the middle the setting applies only to + the refs that match the <pattern>. gc.reflogexpireunreachable:: +gc.<ref>.reflogexpireunreachable:: 'git reflog expire' removes reflog entries older than this time and are not reachable from the current tip; - defaults to 30 days. + defaults to 30 days. With "<pattern>" (e.g. "refs/stash") + in the middle, the setting applies only to the refs that + match the <pattern>. gc.rerereresolved:: Records of conflicted merge you resolved earlier are @@ -971,13 +999,15 @@ gitcvs.logfile:: various stuff. See linkgit:git-cvsserver[1]. gitcvs.usecrlfattr:: - If true, the server will look up the `crlf` attribute for - files to determine the '-k' modes to use. If `crlf` is set, - the '-k' mode will be left blank, so cvs clients will - treat it as text. If `crlf` is explicitly unset, the file + If true, the server will look up the end-of-line conversion + attributes for files to determine the '-k' modes to use. If + the attributes force git to treat a file as text, + the '-k' mode will be left blank so cvs clients will + treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging - the client might otherwise do. If `crlf` is not specified, - then 'gitcvs.allbinary' is used. See linkgit:gitattributes[5]. + the client might otherwise do. If the attributes do not allow + the file type to be determined, then 'gitcvs.allbinary' is + used. See linkgit:gitattributes[5]. gitcvs.allbinary:: This is used if 'gitcvs.usecrlfattr' does not resolve @@ -1264,6 +1294,13 @@ log.date:: following alternatives: {relative,local,default,iso,rfc,short}. See linkgit:git-log[1]. +log.decorate:: + Print out the ref names of any commits that are shown by the log + command. If 'short' is specified, the ref name prefixes 'refs/heads/', + 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is + specified, the full ref name (including prefix) will be printed. + This is the same as the log commands '--decorate' option. + log.showroot:: If true, the initial commit will be shown as a big creation event. This is equivalent to a diff against an empty tree. @@ -1462,6 +1499,16 @@ pager.<cmd>:: it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. +pretty.<name>:: + Alias for a --pretty= format string, as specified in + linkgit:git-log[1]. Any aliases defined here can be used just + as the built-in pretty formats could. For example, + running `git config pretty.changelog "format:{asterisk} %H %s"` + would cause the invocation `git log --pretty=changelog` + to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + Note that an alias with the same name as a built-in format + will be silently ignored. + pull.octopus:: The default merge strategy to use when pulling multiple branches at once. @@ -1574,7 +1621,9 @@ remote.<name>.uploadpack:: remote.<name>.tagopt:: Setting this value to \--no-tags disables automatic tag following when - fetching from remote <name> + fetching from remote <name>. Setting it to \--tags will fetch every + tag from remote <name>, even if they are not reachable from remote + branch heads. remote.<name>.vcs:: Setting this to a value <vcs> will cause git to interact with @@ -1685,6 +1734,15 @@ status.submodulesummary:: summary of commits for modified submodules will be shown (see --summary-limit option of linkgit:git-submodule[1]). +submodule.<name>.path:: +submodule.<name>.url:: +submodule.<name>.update:: + The path within this project, URL, and the updating strategy + for a submodule. These variables are initially populated + by 'git submodule init'; edit them to override the + URL and other values found in the `.gitmodules` file. See + linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the |