diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 795 |
1 files changed, 598 insertions, 197 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index ce9c2509b6..7bc0e53848 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -12,8 +12,9 @@ The configuration variables are used by both the git plumbing and the porcelains. The variables are divided into sections, wherein the fully qualified variable name of the variable itself is the last dot-separated segment and the section name is everything before the last -dot. The variable names are case-insensitive and only alphanumeric -characters are allowed. Some variables may appear multiple times. +dot. The variable names are case-insensitive, allow only alphanumeric +characters and `-`, and must start with an alphabetic character. Some +variables may appear multiple times. Syntax ~~~~~~ @@ -45,24 +46,26 @@ lines. Variables may belong directly to a section or to a given subsection. You can have `[section]` if you have `[section "subsection"]`, but you don't need to. -There is also a case insensitive alternative `[section.subsection]` syntax. -In this syntax, subsection names follow the same restrictions as for section -names. +There is also a deprecated `[section.subsection]` syntax. With this +syntax, the subsection name is converted to lower-case and is also +compared case sensitively. These subsection names follow the same +restrictions as section names. All the other lines (and the remainder of the line after the section header) are recognized as setting variables, in the form 'name = value'. If there is no equal sign on the line, the entire line is taken as 'name' and the variable is recognized as boolean "true". -The variable names are case-insensitive and only alphanumeric -characters and `-` are allowed. There can be more than one value -for a given variable; we say then that variable is multivalued. +The variable names are case-insensitive, allow only alphanumeric characters +and `-`, and must start with an alphabetic character. There can be more +than one value for a given variable; we say then that the variable is +multivalued. Leading and trailing whitespace in a variable value is discarded. Internal whitespace within a variable value is retained verbatim. The values following the equals sign in variable assign are all either a string, an integer, or a boolean. Boolean values may be given as yes/no, -0/1, true/false or on/off. Case is not significant in boolean values, when +1/0, true/false or on/off. Case is not significant in boolean values, when converting value to the canonical form using '--bool' type specifier; 'git config' will ensure that the output is "true" or "false". @@ -83,6 +86,19 @@ customary UNIX fashion. Some variables may require a special value format. +Includes +~~~~~~~~ + +You can include one config file from another by setting the special +`include.path` variable to the name of the file to be included. The +included file is expanded immediately, as if its contents had been +found at the location of the include directive. If the value of the +`include.path` variable is a relative path, the path is considered to be +relative to the configuration file in which the include directive was +found. The value of `include.path` is subject to tilde expansion: `~/` +is expanded to the value of `$HOME`, and `~user/` to the specified +user's home directory. See below for examples. + Example ~~~~~~~ @@ -105,6 +121,11 @@ Example gitProxy="ssh" for "kernel.org" gitProxy=default-proxy ; for the rest + [include] + path = /path/to/foo.inc ; include by absolute path + path = foo ; expand "foo" relative to the current file + path = ~/foo ; expand "foo" in your $HOME directory + Variables ~~~~~~~~~ @@ -114,40 +135,53 @@ in the appropriate manual page. You will find a description of non-core porcelain configuration variables in the respective porcelain documentation. advice.*:: - When set to 'true', display the given optional help message. - When set to 'false', do not display. The configuration variables - are: + These variables control various optional help messages designed to + aid new users. All 'advice.*' variables default to 'true', and you + can tell Git that you do not need help by setting these to 'false': + -- pushNonFastForward:: - Advice shown when linkgit:git-push[1] refuses - non-fast-forward refs. Default: true. + Set this variable to 'false' if you want to disable + 'pushNonFFCurrent', 'pushNonFFDefault', and + 'pushNonFFMatching' simultaneously. + pushNonFFCurrent:: + Advice shown when linkgit:git-push[1] fails due to a + non-fast-forward update to the current branch. + pushNonFFDefault:: + Advice to set 'push.default' to 'upstream' or 'current' + when you ran linkgit:git-push[1] and pushed 'matching + refs' by default (i.e. you did not provide an explicit + refspec, and no 'push.default' configuration was set) + and it resulted in a non-fast-forward error. + pushNonFFMatching:: + Advice shown when you ran linkgit:git-push[1] and pushed + 'matching refs' explicitly (i.e. you used ':', or + specified a refspec that isn't your current branch) and + it resulted in a non-fast-forward error. statusHints:: - Directions on how to stage/unstage/add shown in the - output of linkgit:git-status[1] and the template shown - when writing commit messages. Default: true. + Show directions on how to proceed from the current + state in the output of linkgit:git-status[1] and in + the template shown when writing commit messages in + linkgit:git-commit[1]. commitBeforeMerge:: Advice shown when linkgit:git-merge[1] refuses to - merge to avoid overwritting local changes. - Default: true. + merge to avoid overwriting local changes. resolveConflict:: Advices shown by various commands when conflicts prevent the operation from being performed. - Default: true. implicitIdentity:: Advice on how to set your identity configuration when your information is guessed from the system username and - domain name. Default: true. - + domain name. detachedHead:: - Advice shown when you used linkgit::git-checkout[1] to + Advice shown when you used linkgit:git-checkout[1] to move to the detach HEAD state, to instruct how to create - a local branch after the fact. Default: true. + a local branch after the fact. -- core.fileMode:: If false, the executable bit differences between the index and - the working copy are ignored; useful on broken filesystems like FAT. + the working tree are ignored; useful on broken filesystems like FAT. See linkgit:git-update-index[1]. + The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] @@ -177,9 +211,18 @@ The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] will probe and set core.ignorecase true if appropriate when the repository is created. +core.precomposeunicode:: + This option is only used by Mac OS implementation of git. + When core.precomposeunicode=true, git reverts the unicode decomposition + of filenames done by Mac OS. This is useful when sharing a repository + between Mac OS and Linux or Windows. + (Git for Windows 1.7.10 or higher is needed, or git under cygwin 1.7). + When false, file names are handled fully transparent by git, + which is backward compatible with older versions of git. + core.trustctime:: If false, the ctime differences between the index and the - working copy are ignored; useful when the inode change time + working tree are ignored; useful when the inode change time is regularly modified by something outside Git (file system crawlers and some backup systems). See linkgit:git-update-index[1]. True by default. @@ -196,20 +239,17 @@ core.quotepath:: quoted without `-z` regardless of the setting of this variable. -core.autocrlf:: - If true, makes git convert `CRLF` at the end of lines in text files to - `LF` when reading from the work tree, and convert in reverse when - writing to the work tree. The variable can be set to - 'input', in which case the conversion happens only while - reading from the work tree but files are written out to the work - tree with `LF` at the end of lines. A file is considered - "text" (i.e. be subjected to the autocrlf mechanism) based on - the file's `crlf` attribute, or if `crlf` is unspecified, - based on the file's contents. See linkgit:gitattributes[5]. +core.eol:: + Sets the line ending type to use in the working directory for + files that have the `text` property set. Alternatives are + 'lf', 'crlf' and 'native', which uses the platform's native + line ending. The default value is `native`. See + linkgit:gitattributes[5] for more information on end-of-line + conversion. core.safecrlf:: - If true, makes git check if converting `CRLF` as controlled by - `core.autocrlf` is reversible. Git will verify if a command + If true, makes git check if converting `CRLF` is reversible when + end-of-line conversion is active. Git will verify if a command modifies a file in the work tree either directly or indirectly. For example, committing a file followed by checking out the same file should yield the original file in the work tree. If @@ -219,7 +259,7 @@ core.safecrlf:: irreversible conversion but continue the operation. + CRLF conversion bears a slight chance of corrupting data. -autocrlf=true will convert CRLF to LF during commit and LF to +When it is enabled, git will convert CRLF to LF during commit and LF to CRLF during checkout. A file that contains a mixture of LF and CRLF before the commit cannot be recreated by git. For text files this is the right thing to do: it corrects line endings @@ -243,15 +283,25 @@ converting CRLFs corrupts data. + Note, this safety check does not mean that a checkout will generate a file identical to the original file for a different setting of -`core.autocrlf`, but only for the current one. For example, a text -file with `LF` would be accepted with `core.autocrlf=input` and could -later be checked out with `core.autocrlf=true`, in which case the +`core.eol` and `core.autocrlf`, but only for the current one. For +example, a text file with `LF` would be accepted with `core.eol=lf` +and could later be checked out with `core.eol=crlf`, in which case the resulting file would contain `CRLF`, although the original file contained `LF`. However, in both work trees the line endings would be consistent, that is either all `LF` or all `CRLF`, but never mixed. A file with mixed line endings would be reported by the `core.safecrlf` mechanism. +core.autocrlf:: + Setting this variable to "true" is almost the same as setting + the `text` attribute to "auto" on all files except that text + files are not guaranteed to be normalized: files that contain + `CRLF` in the repository will not be touched. Use this + setting if you want to have `CRLF` line endings in your + working directory even though the repository does not have + normalized line endings. This variable can be set to 'input', + in which case no output conversion is performed. + core.symlinks:: If false, symbolic links are checked out as small plain files that contain the link text. linkgit:git-update-index[1] and @@ -285,7 +335,7 @@ core.ignoreStat:: If true, commands which modify both the working tree and the index will mark the updated paths with the "assume unchanged" bit in the index. These marked files are then assumed to stay unchanged in the - working copy, until you mark them otherwise manually - Git will not + working tree, until you mark them otherwise manually - Git will not detect the file changes by lstat() calls. This is useful on systems where those are very slow, such as Microsoft Windows. See linkgit:git-update-index[1]. @@ -310,24 +360,26 @@ false), while all other repositories are assumed to be bare (bare = true). core.worktree:: - Set the path to the root of the work tree. + Set the path to the root of the working tree. This can be overridden by the GIT_WORK_TREE environment - variable and the '--work-tree' command line option. It can be - an absolute path or a relative path to the .git directory, - either specified by --git-dir or GIT_DIR, or automatically - discovered. - If --git-dir or GIT_DIR are specified but none of + variable and the '--work-tree' command line option. + The value can be an absolute path or relative to the path to + the .git directory, which is either specified by --git-dir + or GIT_DIR, or automatically discovered. + If --git-dir or GIT_DIR is specified but none of --work-tree, GIT_WORK_TREE and core.worktree is specified, - the current working directory is regarded as the root of the - work tree. + the current working directory is regarded as the top level + of your working tree. + Note that this variable is honored even when set in a configuration -file in a ".git" subdirectory of a directory, and its value differs +file in a ".git" subdirectory of a directory and its value differs from the latter directory (e.g. "/path/to/.git/config" has core.worktree set to "/different/path"), which is most likely a -misconfiguration. Running git commands in "/path/to" directory will +misconfiguration. Running git commands in the "/path/to" directory will still use "/different/path" as the root of the work tree and can cause -great confusion to the users. +confusion unless you know what you are doing (e.g. you are creating a +read-only snapshot of the same index to a location different from the +repository's usual working tree). core.logAllRefUpdates:: Enable the reflog. Updates to a ref <ref> is logged to the file @@ -335,7 +387,9 @@ core.logAllRefUpdates:: SHA1, the date/time and the reason of the update, but only when the file exists. If this configuration variable is set to true, missing "$GIT_DIR/logs/<ref>" - file is automatically created for branch heads. + file is automatically created for branch heads (i.e. under + refs/heads/), remote refs (i.e. under refs/remotes/), + note refs (i.e. under refs/notes/), and the symbolic ref HEAD. + This information can be used to determine what commit was the tip of a branch "2 days ago". @@ -411,7 +465,7 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.deltaBaseCacheLimit:: Maximum number of bytes to reserve for caching base objects - that multiple deltafied objects reference. By storing the + that may be referenced by multiple deltified objects. By storing the entire decompressed base objects in a cache Git is able to avoid unpacking and decompressing frequently used base objects multiple times. @@ -433,15 +487,32 @@ for most projects as source code and other text files can still be delta compressed, but larger binary media files won't be. + Common unit suffixes of 'k', 'm', or 'g' are supported. -+ -Currently only linkgit:git-fast-import[1] honors this setting. core.excludesfile:: In addition to '.gitignore' (per-directory) and '.git/info/exclude', git looks into this file for patterns - of files which are not meant to be tracked. "{tilde}/" is expanded - to the value of `$HOME` and "{tilde}user/" to the specified user's - home directory. See linkgit:gitignore[5]. + of files which are not meant to be tracked. "`~/`" is expanded + to the value of `$HOME` and "`~user/`" to the specified user's + home directory. Its default value is $XDG_CONFIG_HOME/git/ignore. + If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore + is used instead. See linkgit:gitignore[5]. + +core.askpass:: + Some commands (e.g. svn and http interfaces) that interactively + ask for a password can be told to use an external program given + via the value of this variable. Can be overridden by the 'GIT_ASKPASS' + environment variable. If not set, fall back to the value of the + 'SSH_ASKPASS' environment variable or, failing that, a simple password + prompt. The external program shall be given a suitable prompt as + command line argument and write the password on its STDOUT. + +core.attributesfile:: + In addition to '.gitattributes' (per-directory) and + '.git/info/attributes', git looks into this file for attributes + (see linkgit:gitattributes[5]). Path expansions are made the same + way as for `core.excludesfile`. Its default value is + $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not + set or empty, $HOME/.config/git/attributes is used instead. core.editor:: Commands such as `commit` and `tag` that lets you edit @@ -449,6 +520,12 @@ core.editor:: variable when it is set, and the environment variable `GIT_EDITOR` is not set. See linkgit:git-var[1]. +sequence.editor:: + Text editor used by `git rebase -i` for editing the rebase insn file. + The value is meant to be interpreted by the shell when it is used. + It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. + When not configured the default commit message editor is used instead. + core.pager:: The command that git will use to paginate output. Can be overridden with the `GIT_PAGER` environment @@ -481,6 +558,8 @@ core.whitespace:: error (enabled by default). * `indent-with-non-tab` treats a line that is indented with 8 or more space characters as an error (not enabled by default). +* `tab-in-indent` treats a tab character in the initial indent part of + the line as an error (not enabled by default). * `blank-at-eof` treats blank lines added at the end of file as an error (enabled by default). * `trailing-space` is a short-hand to cover both `blank-at-eol` and @@ -489,6 +568,9 @@ core.whitespace:: part of the line terminator, i.e. with it, `trailing-space` does not trigger if the character before such a carriage-return is not a whitespace (not enabled by default). +* `tabwidth=<n>` tells how many character positions a tab occupies; this + is relevant for `indent-with-non-tab` and when git fixes `tab-in-indent` + errors. The default tab width is 8. Allowed values are 1 to 63. core.fsyncobjectfiles:: This boolean will enable 'fsync()' when writing object files. @@ -518,21 +600,23 @@ check that makes sure that existing object files will not get overwritten. core.notesRef:: When showing commit messages, also show notes which are stored in - the given ref. This ref is expected to contain files named - after the full SHA-1 of the commit they annotate. + the given ref. The ref must be fully qualified. If the given + ref does not exist, it is not an error but means that no + notes should be printed. + -If such a file exists in the given ref, the referenced blob is read, and -appended to the commit message, separated by a "Notes:" line. If the -given ref itself does not exist, it is not an error, but means that no -notes should be printed. -+ -This setting defaults to "refs/notes/commits", and can be overridden by -the `GIT_NOTES_REF` environment variable. +This setting defaults to "refs/notes/commits", and it can be overridden by +the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in linkgit:git-read-tree[1] for more information. +core.abbrev:: + Set the length object names are abbreviated to. If unspecified, + many commands abbreviate to 7 hexdigits, which may not be enough + for abbreviated object names to stay unique for sufficiently long + time. + add.ignore-errors:: add.ignoreErrors:: Tells 'git add' to continue adding files when some files cannot be @@ -558,6 +642,15 @@ it will be treated as a shell command. For example, defining "gitk --all --not ORIG_HEAD". Note that shell commands will be executed from the top-level directory of a repository, which may not necessarily be the current directory. +'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix' +from the original current directory. See linkgit:git-rev-parse[1]. + +am.keepcr:: + If true, git-am will call git-mailsplit for patches in mbox format + with parameter '--keep-cr'. In this case git-mailsplit will + not remove `\r` from lines ending with `\r\n`. Can be overridden + by giving '--no-keep-cr' from the command line. + See linkgit:git-am[1], linkgit:git-mailsplit[1]. apply.ignorewhitespace:: When set to 'change', tells 'git apply' to ignore changes in @@ -578,8 +671,9 @@ branch.autosetupmerge:: this behavior can be chosen per-branch using the `--track` and `--no-track` options. The valid settings are: `false` -- no automatic setup is done; `true` -- automatic setup is done when the - starting point is a remote branch; `always` -- automatic setup is - done when the starting point is either a local branch or remote + starting point is a remote-tracking branch; `always` -- + automatic setup is done when the starting point is either a + local branch or remote-tracking branch. This option defaults to true. branch.autosetuprebase:: @@ -590,7 +684,7 @@ branch.autosetuprebase:: When `local`, rebase is set to true for tracked branches of other local branches. When `remote`, rebase is set to true for tracked branches of - remote branches. + remote-tracking branches. When `always`, rebase will be set to true for all tracking branches. See "branch.autosetupmerge" for details on how to set up a @@ -604,7 +698,7 @@ branch.<name>.remote:: branch.<name>.merge:: Defines, together with branch.<name>.remote, the upstream branch - for the given branch. It tells 'git fetch'/'git pull' which + for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which branch to merge and can also affect 'git push' (see push.default). When in branch <name>, it tells 'git fetch' the default refspec to be marked for merging in FETCH_HEAD. The value is @@ -629,15 +723,17 @@ branch.<name>.mergeoptions:: branch.<name>.rebase:: When true, rebase the branch <name> on top of the fetched branch, instead of merging the default branch from the default remote when - "git pull" is run. - *NOTE*: this is a possibly dangerous operation; do *not* use - it unless you understand the implications (see linkgit:git-rebase[1] - for details). + "git pull" is run. See "pull.rebase" for doing this in a non + branch-specific manner. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand the implications (see linkgit:git-rebase[1] +for details). browser.<tool>.cmd:: Specify the command to invoke the specified browser. The specified command is evaluated in shell with the URLs passed - as arguments. (See linkgit:git-web--browse[1].) + as arguments. (See linkgit:git-web{litdd}browse[1].) browser.<tool>.path:: Override the path for the given tool that may be used to @@ -657,7 +753,7 @@ color.branch:: color.branch.<slot>:: Use customized color for branch coloration. `<slot>` is one of `current` (the current branch), `local` (a local branch), - `remote` (a tracking branch in refs/remotes/), `plain` (other + `remote` (a remote-tracking branch in refs/remotes/), `plain` (other refs). + The value for these configuration variables is a list of colors (at most @@ -669,9 +765,16 @@ second is the background. The position of the attribute, if any, doesn't matter. color.diff:: - When set to `always`, always use colors in patch. - When false (or `never`), never. When set to `true` or `auto`, use - colors only when the output is to the terminal. Defaults to false. + Whether to use ANSI escape sequences to add color to patches. + If this is set to `always`, linkgit:git-diff[1], + linkgit:git-log[1], and linkgit:git-show[1] will use color + for all patches. If it is set to `true` or `auto`, those + commands will only use color when output is to the terminal. + Defaults to false. ++ +This does not affect linkgit:git-format-patch[1] nor the +'git-diff-{asterisk}' plumbing commands. Can be overridden on the +command line with the `--color[=<when>]` option. color.diff.<slot>:: Use customized color for diff colorization. `<slot>` specifies @@ -682,14 +785,39 @@ color.diff.<slot>:: (highlighting whitespace errors). The values of these variables may be specified as in color.branch.<slot>. +color.decorate.<slot>:: + Use customized color for 'git log --decorate' output. `<slot>` is one + of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local + branches, remote-tracking branches, tags, stash and HEAD, respectively. + color.grep:: When set to `always`, always highlight matches. When `false` (or `never`), never. When set to `true` or `auto`, use color only when the output is written to the terminal. Defaults to `false`. -color.grep.match:: - Use customized color for matches. The value of this variable - may be specified as in color.branch.<slot>. +color.grep.<slot>:: + Use customized color for grep colorization. `<slot>` specifies which + part of the line to use the specified color, and is one of ++ +-- +`context`;; + non-matching text in context lines (when using `-A`, `-B`, or `-C`) +`filename`;; + filename prefix (when not using `-h`) +`function`;; + function name lines (when using `-p`) +`linenumber`;; + line number prefix (when using `-n`) +`match`;; + matching text +`selected`;; + non-matching text in selected lines +`separator`;; + separators between fields on a line (`:`, `-`, and `=`) + and between hunks (`--`) +-- ++ +The values of these variables may be specified as in color.branch.<slot>. color.interactive:: When set to `always`, always use colors for interactive prompts @@ -725,17 +853,60 @@ color.status.<slot>:: one of `header` (the header text of the status message), `added` or `updated` (files which are added but not committed), `changed` (files which are changed but not added in the index), - `untracked` (files which are not tracked by git), or + `untracked` (files which are not tracked by git), + `branch` (the current branch), or `nobranch` (the color the 'no branch' warning is shown in, defaulting to red). The values of these variables may be specified as in color.branch.<slot>. color.ui:: - When set to `always`, always use colors in all git commands which - are capable of colored output. When false (or `never`), never. When - set to `true` or `auto`, use colors only when the output is to the - terminal. When more specific variables of color.* are set, they always - take precedence over this setting. Defaults to false. + This variable determines the default value for variables such + as `color.diff` and `color.grep` that control the use of color + per command family. Its scope will expand as more commands learn + configuration to set a default for the `--color` option. Set it + to `always` if you want all output not intended for machine + consumption to use color, to `true` or `auto` if you want such + output to use color when written to the terminal, or to `false` or + `never` if you prefer git commands not to use color unless enabled + explicitly with some other configuration or the `--color` option. + +column.ui:: + Specify whether supported commands should output in columns. + This variable consists of a list of tokens separated by spaces + or commas: ++ +-- +`always`;; + always show in columns +`never`;; + never show in columns +`auto`;; + show in columns if the output is to the terminal +`column`;; + fill columns before rows (default) +`row`;; + fill rows before columns +`plain`;; + show in one column +`dense`;; + make unequal size columns to utilize more space +`nodense`;; + make equal size columns +-- ++ +This option defaults to 'never'. + +column.branch:: + Specify whether to output branch listing in `git branch` in columns. + See `column.ui` for details. + +column.status:: + Specify whether to output untracked files in `git status` in columns. + See `column.ui` for details. + +column.tag:: + Specify whether to output tag listing in `git tag` in columns. + See `column.ui` for details. commit.status:: A boolean to enable/disable inclusion of status information in the @@ -744,62 +915,33 @@ commit.status:: commit.template:: Specify a file to use as the template for new commit messages. - "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the specified user's home directory. -diff.autorefreshindex:: - When using 'git diff' to compare with work tree - files, do not consider stat-only change as changed. - Instead, silently run `git update-index --refresh` to - update the cached stat information for paths whose - contents in the work tree match the contents in the - index. This option defaults to true. Note that this - affects only 'git diff' Porcelain, and not lower level - 'diff' commands such as 'git diff-files'. - -diff.external:: - If this config variable is set, diff generation is not - performed using the internal diff machinery, but using the - given command. Can be overridden with the `GIT_EXTERNAL_DIFF' - environment variable. The command is called with parameters - as described under "git Diffs" in linkgit:git[1]. Note: if - you want to use an external diff program only on a subset of - your files, you might want to use linkgit:gitattributes[5] instead. - -diff.mnemonicprefix:: - If set, 'git diff' uses a prefix pair that is different from the - standard "a/" and "b/" depending on what is being compared. When - this configuration is in effect, reverse diff output also swaps - the order of the prefixes: -`git diff`;; - compares the (i)ndex and the (w)ork tree; -`git diff HEAD`;; - compares a (c)ommit and the (w)ork tree; -`git diff --cached`;; - compares a (c)ommit and the (i)ndex; -`git diff HEAD:file1 file2`;; - compares an (o)bject and a (w)ork tree entity; -`git diff --no-index a b`;; - compares two non-git things (1) and (2). - -diff.renameLimit:: - The number of files to consider when performing the copy/rename - detection; equivalent to the 'git diff' option '-l'. - -diff.renames:: - Tells git to detect renames. If set to any boolean value, it - will enable basic rename detection. If set to "copies" or - "copy", it will detect copies, as well. - -diff.suppressBlankEmpty:: - A boolean to inhibit the standard behavior of printing a space - before each empty output line. Defaults to false. - -diff.tool:: - Controls which diff tool is used. `diff.tool` overrides - `merge.tool` when used by linkgit:git-difftool[1] and has - the same valid values as `merge.tool` minus "tortoisemerge" - and plus "kompare". +credential.helper:: + Specify an external helper to be called when a username or + password credential is needed; the helper may consult external + storage to avoid prompting the user for the credentials. See + linkgit:gitcredentials[7] for details. + +credential.useHttpPath:: + When acquiring credentials, consider the "path" component of an http + or https URL to be important. Defaults to false. See + linkgit:gitcredentials[7] for more information. + +credential.username:: + If no username is set for a network authentication, use this username + by default. See credential.<context>.* below, and + linkgit:gitcredentials[7]. + +credential.<url>.*:: + Any of the credential.* options above can be applied selectively to + some credentials. For example "credential.https://example.com.username" + would set the default username only for https connections to + example.com. See linkgit:gitcredentials[7] for details on how URLs are + matched. + +include::diff-config.txt[] difftool.<tool>.path:: Override the path for the given tool. This is useful in case @@ -822,6 +964,22 @@ diff.wordRegex:: sequences that match the regular expression are "words", all other characters are *ignorable* whitespace. +fetch.recurseSubmodules:: + This option can be either set to a boolean value or to 'on-demand'. + Setting it to a boolean changes the behavior of fetch and pull to + unconditionally recurse into submodules when set to true or to not + recurse at all when set to false. When set to 'on-demand' (the default + value), fetch and pull will only recurse into a populated submodule + when its superproject retrieves a commit that updates the submodule's + reference. + +fetch.fsckObjects:: + If it is set to true, git-fetch-pack will check all fetched + objects. It will abort in the case of a malformed object or a + broken link. The result of an abort are only dangling objects. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. + fetch.unpackLimit:: If the number of objects fetched over the git native transfer is below this @@ -851,14 +1009,22 @@ format.headers:: Additional email headers to include in a patch to be submitted by mail. See linkgit:git-format-patch[1]. +format.to:: format.cc:: - Additional "Cc:" headers to include in a patch to be submitted - by mail. See the --cc option in linkgit:git-format-patch[1]. + Additional recipients to include in a patch to be submitted + by mail. See the --to and --cc options in + linkgit:git-format-patch[1]. format.subjectprefix:: The default for format-patch is to output files with the '[PATCH]' subject prefix. Use this variable to change that prefix. +format.signature:: + The default for format-patch is to output a signature containing + the git version number. Use this variable to change that default. + Set this variable to the empty string ("") to suppress + signature generation. + format.suffix:: The default for format-patch is to output files with the suffix `.patch`. Use this variable to change that suffix (make sure to @@ -874,7 +1040,7 @@ format.thread:: a boolean value, or `shallow` or `deep`. `shallow` threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the - `\--in-reply-to`, and the first patch mail, in this order. + `--in-reply-to`, and the first patch mail, in this order. `deep` threading makes every mail a reply to the previous one. A true boolean value is the same as `shallow`, and a false value disables threading. @@ -886,6 +1052,16 @@ format.signoff:: the rights to submit this work under the same open source license. Please see the 'SubmittingPatches' document for further discussion. +filter.<driver>.clean:: + The command which is used to convert the content of a worktree + file to a blob upon checkin. See linkgit:gitattributes[5] for + details. + +filter.<driver>.smudge:: + The command which is used to convert the content of a blob + object to a worktree file upon checkout. See + linkgit:gitattributes[5] for details. + gc.aggressiveWindow:: The window size parameter used in the delta compression algorithm used by 'git gc --aggressive'. This defaults @@ -908,7 +1084,7 @@ gc.packrefs:: Running `git pack-refs` in a repository renders it unclonable by Git versions prior to 1.5.1.2 over dumb transports such as HTTP. This variable determines whether - 'git gc' runs `git pack-refs`. This can be set to `nobare` + 'git gc' runs `git pack-refs`. This can be set to `notbare` to enable it within all non-bare repos or it can be set to a boolean value. The default is `true`. @@ -919,13 +1095,19 @@ gc.pruneexpire:: unreachable objects immediately. gc.reflogexpire:: +gc.<pattern>.reflogexpire:: 'git reflog expire' removes reflog entries older than - this time; defaults to 90 days. + this time; defaults to 90 days. With "<pattern>" (e.g. + "refs/stash") in the middle the setting applies only to + the refs that match the <pattern>. gc.reflogexpireunreachable:: +gc.<ref>.reflogexpireunreachable:: 'git reflog expire' removes reflog entries older than this time and are not reachable from the current tip; - defaults to 30 days. + defaults to 30 days. With "<pattern>" (e.g. "refs/stash") + in the middle, the setting applies only to the refs that + match the <pattern>. gc.rerereresolved:: Records of conflicted merge you resolved earlier are @@ -950,13 +1132,15 @@ gitcvs.logfile:: various stuff. See linkgit:git-cvsserver[1]. gitcvs.usecrlfattr:: - If true, the server will look up the `crlf` attribute for - files to determine the '-k' modes to use. If `crlf` is set, - the '-k' mode will be left blank, so cvs clients will - treat it as text. If `crlf` is explicitly unset, the file + If true, the server will look up the end-of-line conversion + attributes for files to determine the '-k' modes to use. If + the attributes force git to treat a file as text, + the '-k' mode will be left blank so CVS clients will + treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging - the client might otherwise do. If `crlf` is not specified, - then 'gitcvs.allbinary' is used. See linkgit:gitattributes[5]. + the client might otherwise do. If the attributes do not allow + the file type to be determined, then 'gitcvs.allbinary' is + used. See linkgit:gitattributes[5]. gitcvs.allbinary:: This is used if 'gitcvs.usecrlfattr' does not resolve @@ -1003,6 +1187,40 @@ All gitcvs variables except for 'gitcvs.usecrlfattr' and is one of "ext" and "pserver") to make them apply only for the given access method. +gitweb.category:: +gitweb.description:: +gitweb.owner:: +gitweb.url:: + See linkgit:gitweb[1] for description. + +gitweb.avatar:: +gitweb.blame:: +gitweb.grep:: +gitweb.highlight:: +gitweb.patches:: +gitweb.pickaxe:: +gitweb.remote_heads:: +gitweb.showsizes:: +gitweb.snapshot:: + See linkgit:gitweb.conf[5] for description. + +grep.lineNumber:: + If set to true, enable '-n' option by default. + +grep.extendedRegexp:: + If set to true, enable '--extended-regexp' option by default. + +gpg.program:: + Use this custom program instead of "gpg" found on $PATH when + making or verifying a PGP signature. The program must support the + same command line interface as GPG, namely, to verify a detached + signature, "gpg --verify $file - <$signature" is run, and the + program is expected to signal a good signature by exiting with + code 0, and to generate an ascii-armored detached signature, the + standard input of "gpg -bsau $key" is fed with the contents to be + signed, and the program is expected to send the result to its + standard output. + gui.commitmsgwidth:: Defines how wide the commit message window is in the linkgit:git-gui[1]. "75" is the default. @@ -1029,7 +1247,7 @@ gui.newbranchtemplate:: linkgit:git-gui[1]. gui.pruneduringfetch:: - "true" if linkgit:git-gui[1] should prune tracking branches when + "true" if linkgit:git-gui[1] should prune remote-tracking branches when performing a fetch. The default value is "false". gui.trustmtime:: @@ -1127,9 +1345,18 @@ help.autocorrect:: This is the default. http.proxy:: - Override the HTTP proxy, normally configured using the 'http_proxy' - environment variable (see linkgit:curl[1]). This can be overridden - on a per-remote basis; see remote.<name>.proxy + Override the HTTP proxy, normally configured using the 'http_proxy', + 'https_proxy', and 'all_proxy' environment variables (see + `curl(1)`). This can be overridden on a per-remote basis; see + remote.<name>.proxy + +http.cookiefile:: + File containing previously stored cookie lines which should be used + in the git http session, if they match the server. The file format + of the file to read cookies from should be plain HTTP headers or + the Netscape/Mozilla cookie file format (see linkgit:curl[1]). + NOTE that the file specified with http.cookiefile is only used as + input. No cookies will be stored in the file. http.sslVerify:: Whether to verify the SSL certificate when fetching or pushing @@ -1192,6 +1419,15 @@ http.noEPSV:: support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' environment variable. Default is false (curl will use EPSV). +http.useragent:: + The HTTP USER_AGENT string presented to an HTTP server. The default + value represents the version of the client git such as git/1.7.1. + This option allows you to override this value to a more common value + such as Mozilla/4.0. This may be necessary, for instance, if + connecting through a firewall that restricts HTTP connections to a set + of common USER_AGENT strings (but not including those like git/1.7.1). + Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable. + i18n.commitEncoding:: Character encoding the commit messages are stored in; git itself does not care per se, but this information is necessary e.g. when @@ -1207,6 +1443,10 @@ imap:: The configuration variables in the 'imap' section are described in linkgit:git-imap-send[1]. +init.templatedir:: + Specify the directory from which templates will be copied. + (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) + instaweb.browser:: Specify the program that will be used to browse your working repository in gitweb. See linkgit:git-instaweb[1]. @@ -1220,7 +1460,9 @@ instaweb.local:: be bound to the local IP (127.0.0.1). instaweb.modulepath:: - The module path for an apache httpd used by linkgit:git-instaweb[1]. + The default module path for linkgit:git-instaweb[1] to use + instead of /usr/lib/apache2/modules. Only used if httpd + is Apache. instaweb.port:: The port number to bind the gitweb httpd to. See @@ -1229,15 +1471,30 @@ instaweb.port:: interactive.singlekey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). - Currently this is used only by the `\--patch` mode of - linkgit:git-add[1]. Note that this setting is silently - ignored if portable keystroke input is not available. + Currently this is used by the `--patch` mode of + linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], + linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this + setting is silently ignored if portable keystroke input + is not available. + +log.abbrevCommit:: + If true, makes linkgit:git-log[1], linkgit:git-show[1], and + linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may + override this option with `--no-abbrev-commit`. log.date:: - Set default date-time mode for the log command. Setting log.date - value is similar to using 'git log'\'s --date option. The value is one of the - following alternatives: {relative,local,default,iso,rfc,short}. - See linkgit:git-log[1]. + Set the default date-time mode for the 'log' command. + Setting a value for log.date is similar to using 'git log''s + `--date` option. Possible values are `relative`, `local`, + `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1] + for details. + +log.decorate:: + Print out the ref names of any commits that are shown by the log + command. If 'short' is specified, the ref name prefixes 'refs/heads/', + 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is + specified, the full ref name (including prefix) will be printed. + This is the same as the log commands '--decorate' option. log.showroot:: If true, the initial commit will be shown as a big creation event. @@ -1307,6 +1564,54 @@ mergetool.keepTemporaries:: mergetool.prompt:: Prompt before each invocation of the merge resolution program. +notes.displayRef:: + The (fully qualified) refname from which to show notes when + showing commit messages. The value of this variable can be set + to a glob, in which case notes from all matching refs will be + shown. You may also specify this configuration variable + several times. A warning will be issued for refs that do not + exist, but a glob that does not match any refs is silently + ignored. ++ +This setting can be overridden with the `GIT_NOTES_DISPLAY_REF` +environment variable, which must be a colon separated list of refs or +globs. ++ +The effective value of "core.notesRef" (possibly overridden by +GIT_NOTES_REF) is also implicitly added to the list of refs to be +displayed. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`) and this variable is set to `true`, git + automatically copies your notes from the original to the + rewritten commit. Defaults to `true`, but see + "notes.rewriteRef" below. + +notes.rewriteMode:: + When copying notes during a rewrite (see the + "notes.rewrite.<command>" option), determines what to do if + the target commit already has a note. Must be one of + `overwrite`, `concatenate`, or `ignore`. Defaults to + `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. The ref may be a + glob, in which case notes in all matching refs will be copied. + You may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. Set it to `refs/notes/commits` to enable +rewriting for the default commit notes. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_REF` +environment variable, which must be a colon separated list of refs or +globs. + pack.window:: The size of the window used by linkgit:git-pack-objects[1] when no window size is given on the command line. Defaults to 10. @@ -1329,6 +1634,10 @@ pack.compression:: not set, defaults to -1, the zlib default, which is "a default compromise between speed and compression (currently equivalent to level 6)." ++ +Note that changing the compression level will not automatically recompress +all existing objects. You can force recompression by passing the -F option +to linkgit:git-repack[1]. pack.deltaCacheSize:: The maximum memory in bytes used for caching deltas in @@ -1366,29 +1675,51 @@ pack.indexVersion:: and this config option ignored whenever the corresponding pack is larger than 2 GB. + -If you have an old git that does not understand the version 2 `{asterisk}.idx` file, +If you have an old git that does not understand the version 2 `*.idx` file, cloning or fetching over a non native protocol (e.g. "http" and "rsync") -that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the +that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your -older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however, +older version of git. If the `*.pack` file is smaller than 2 GB, however, you can use linkgit:git-index-pack[1] on the *.pack file to regenerate -the `{asterisk}.idx` file. +the `*.idx` file. pack.packSizeLimit:: The maximum size of a pack. This setting only affects packing to a file when repacking, i.e. the git:// protocol - is unaffected. It can be overridden by the `\--max-pack-size` + is unaffected. It can be overridden by the `--max-pack-size` option of linkgit:git-repack[1]. The minimum size allowed is limited to 1 MiB. The default is unlimited. Common unit suffixes of 'k', 'm', or 'g' are supported. pager.<cmd>:: - Allows turning on or off pagination of the output of a - particular git subcommand when writing to a tty. If - `\--paginate` or `\--no-pager` is specified on the command line, - it takes precedence over this option. To disable pagination for - all commands, set `core.pager` or `GIT_PAGER` to `cat`. + If the value is boolean, turns on or off pagination of the + output of a particular git subcommand when writing to a tty. + Otherwise, turns on pagination for the subcommand using the + pager specified by the value of `pager.<cmd>`. If `--paginate` + or `--no-pager` is specified on the command line, it takes + precedence over this option. To disable pagination for all + commands, set `core.pager` or `GIT_PAGER` to `cat`. + +pretty.<name>:: + Alias for a --pretty= format string, as specified in + linkgit:git-log[1]. Any aliases defined here can be used just + as the built-in pretty formats could. For example, + running `git config pretty.changelog "format:* %H %s"` + would cause the invocation `git log --pretty=changelog` + to be equivalent to running `git log "--pretty=format:* %H %s"`. + Note that an alias with the same name as a built-in format + will be silently ignored. + +pull.rebase:: + When true, rebase branches on top of the fetched branch, instead + of merging the default branch from the default remote when "git + pull" is run. See "branch.<name>.rebase" for setting this on a + per-branch basis. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand the implications (see linkgit:git-rebase[1] +for details). pull.octopus:: The default merge strategy to use when pulling multiple branches @@ -1403,17 +1734,41 @@ push.default:: no refspec is implied by any of the options given on the command line. Possible values are: + -* `nothing` do not push anything. -* `matching` push all matching branches. - All branches having the same name in both ends are considered to be - matching. This is the default. -* `tracking` push the current branch to its upstream branch. -* `current` push the current branch to a branch of the same name. +-- +* `nothing` - do not push anything. +* `matching` - push all branches having the same name in both ends. + This is for those who prepare all the branches into a publishable + shape and then push them out with a single command. It is not + appropriate for pushing into a repository shared by multiple users, + since locally stalled branches will attempt a non-fast forward push + if other users updated the branch. + + + This is currently the default, but Git 2.0 will change the default + to `simple`. +* `upstream` - push the current branch to its upstream branch. + With this, `git push` will update the same remote ref as the one which + is merged by `git pull`, making `push` and `pull` symmetrical. + See "branch.<name>.merge" for how to configure the upstream branch. +* `simple` - like `upstream`, but refuses to push if the upstream + branch's name is different from the local one. This is the safest + option and is well-suited for beginners. It will become the default + in Git 2.0. +* `current` - push the current branch to a branch of the same name. +-- ++ +The `simple`, `current` and `upstream` modes are for those who want to +push out a single branch after finishing work, even when the other +branches are not yet ready to be pushed out. If you are working with +other people to push into the same shared repository, you would want +to use one of these. rebase.stat:: Whether to show a diffstat of what changed upstream since the last rebase. False by default. +rebase.autosquash:: + If set to true enable '--autosquash' option by default. + receive.autogc:: By default, git-receive-pack will run "git-gc --auto" after receiving data from git-push and updating refs. You can stop @@ -1423,7 +1778,8 @@ receive.fsckObjects:: If it is set to true, git-receive-pack will check all received objects. It will abort in the case of a malformed object or a broken link. The result of an abort are only dangling objects. - Defaults to false. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. receive.unpackLimit:: If the number of objects received in a push is below this @@ -1439,8 +1795,12 @@ receive.denyDeletes:: If set to true, git-receive-pack will deny a ref update that deletes the ref. Use this to prevent such a ref deletion via a push. +receive.denyDeleteCurrent:: + If set to true, git-receive-pack will deny a ref update that + deletes the currently checked out branch of a non-bare repository. + receive.denyCurrentBranch:: - If set to true or "refuse", receive-pack will deny a ref update + If set to true or "refuse", git-receive-pack will deny a ref update to the currently checked out branch of a non-bare repository. Such a push is potentially dangerous because it brings the HEAD out of sync with the index and working tree. If set to "warn", @@ -1480,7 +1840,7 @@ remote.<name>.push:: remote.<name>.mirror:: If true, pushing to this remote will automatically behave - as if the `\--mirror` option was given on the command line. + as if the `--mirror` option was given on the command line. remote.<name>.skipDefaultUpdate:: If true, this remote will be skipped by default when updating @@ -1502,7 +1862,11 @@ remote.<name>.uploadpack:: remote.<name>.tagopt:: Setting this value to \--no-tags disables automatic tag following when - fetching from remote <name> + fetching from remote <name>. Setting it to \--tags will fetch every + tag from remote <name>, even if they are not reachable from remote + branch heads. Passing these flags directly to linkgit:git-fetch[1] can + override this setting. See options \--tags and \--no-tags of + linkgit:git-fetch[1]. remote.<name>.vcs:: Setting this to a value <vcs> will cause git to interact with @@ -1527,10 +1891,11 @@ rerere.autoupdate:: rerere.enabled:: Activate recording of resolved conflicts, so that identical - conflict hunks can be resolved automatically, should they - be encountered again. linkgit:git-rerere[1] command is by - default enabled if you create `rr-cache` directory under - `$GIT_DIR`, but can be disabled by setting this option to false. + conflict hunks can be resolved automatically, should they be + encountered again. By default, linkgit:git-rerere[1] is + enabled if there is an `rr-cache` directory under the + `$GIT_DIR`, e.g. if "rerere" was previously used in the + repository. sendemail.identity:: A configuration identity. When given, causes values in the @@ -1566,8 +1931,10 @@ sendemail.smtppass:: sendemail.suppresscc:: sendemail.suppressfrom:: sendemail.to:: +sendemail.smtpdomain:: sendemail.smtpserver:: sendemail.smtpserverport:: +sendemail.smtpserveroption:: sendemail.smtpuser:: sendemail.thread:: sendemail.validate:: @@ -1596,9 +1963,9 @@ status.showUntrackedFiles:: the untracked files. Possible values are: + -- - - 'no' - Show no untracked files - - 'normal' - Shows untracked files and directories - - 'all' - Shows also individual files in untracked directories. +* `no` - Show no untracked files. +* `normal` - Show untracked files and directories. +* `all` - Show also individual files in untracked directories. -- + If this variable is not specified, it defaults to 'normal'. @@ -1612,6 +1979,35 @@ status.submodulesummary:: summary of commits for modified submodules will be shown (see --summary-limit option of linkgit:git-submodule[1]). +submodule.<name>.path:: +submodule.<name>.url:: +submodule.<name>.update:: + The path within this project, URL, and the updating strategy + for a submodule. These variables are initially populated + by 'git submodule init'; edit them to override the + URL and other values found in the `.gitmodules` file. See + linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. + +submodule.<name>.fetchRecurseSubmodules:: + This option can be used to control recursive fetching of this + submodule. It can be overridden by using the --[no-]recurse-submodules + command line option to "git fetch" and "git pull". + This setting will override that from in the linkgit:gitmodules[5] + file. + +submodule.<name>.ignore:: + Defines under what circumstances "git status" and the diff family show + a submodule as modified. When set to "all", it will never be considered + modified, "dirty" will ignore all changes to the submodules work tree and + takes only differences between the HEAD of the submodule and the commit + recorded in the superproject into account. "untracked" will additionally + let submodules with modified tracked files in their work tree show up. + Using "none" (the default when this option is not set) also shows + submodules that have untracked files in their work tree as changed. + This setting overrides any setting made in .gitmodules for this submodule, + both settings can be overridden on the command line by using the + "--ignore-submodules" option. + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the @@ -1619,6 +2015,11 @@ tar.umask:: archiving user's umask will be used instead. See umask(2) and linkgit:git-archive[1]. +transfer.fsckObjects:: + When `fetch.fsckObjects` or `receive.fsckObjects` are + not set, the value of this variable is used instead. + Defaults to false. + transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are not set, the value of this variable is used instead. |