diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 119 |
1 files changed, 106 insertions, 13 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index 4c36aa95b7..e5aa2cacfa 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -138,6 +138,11 @@ advice.*:: Advice on how to set your identity configuration when your information is guessed from the system username and domain name. Default: true. + + detachedHead:: + Advice shown when you used linkgit::git-checkout[1] to + move to the detach HEAD state, to instruct how to create + a local branch after the fact. Default: true. -- core.fileMode:: @@ -193,11 +198,11 @@ core.quotepath:: core.autocrlf:: If true, makes git convert `CRLF` at the end of lines in text files to - `LF` when reading from the filesystem, and convert in reverse when - writing to the filesystem. The variable can be set to + `LF` when reading from the work tree, and convert in reverse when + writing to the work tree. The variable can be set to 'input', in which case the conversion happens only while - reading from the filesystem but files are written out with - `LF` at the end of lines. A file is considered + reading from the work tree but files are written out to the work + tree with `LF` at the end of lines. A file is considered "text" (i.e. be subjected to the autocrlf mechanism) based on the file's `crlf` attribute, or if `crlf` is unspecified, based on the file's contents. See linkgit:gitattributes[5]. @@ -476,6 +481,8 @@ core.whitespace:: error (enabled by default). * `indent-with-non-tab` treats a line that is indented with 8 or more space characters as an error (not enabled by default). +* `tab-in-indent` treats a tab character in the initial indent part of + the line as an error (not enabled by default). * `blank-at-eof` treats blank lines added at the end of file as an error (enabled by default). * `trailing-space` is a short-hand to cover both `blank-at-eol` and @@ -514,10 +521,12 @@ check that makes sure that existing object files will not get overwritten. core.notesRef:: When showing commit messages, also show notes which are stored in the given ref. This ref is expected to contain files named - after the full SHA-1 of the commit they annotate. + after the full SHA-1 of the commit they annotate. The ref + must be fully qualified. + If such a file exists in the given ref, the referenced blob is read, and -appended to the commit message, separated by a "Notes:" line. If the +appended to the commit message, separated by a "Notes (<refname>):" +line (shortened to "Notes:" in the case of "refs/notes/commits"). If the given ref itself does not exist, it is not an error, but means that no notes should be printed. + @@ -550,6 +559,13 @@ it will be treated as a shell command. For example, defining executed from the top-level directory of a repository, which may not necessarily be the current directory. +am.keepcr:: + If true, git-am will call git-mailsplit for patches in mbox format + with parameter '--keep-cr'. In this case git-mailsplit will + not remove `\r` from lines ending with `\r\n`. Can be overrriden + by giving '--no-keep-cr' from the command line. + See linkgit:git-am[1], linkgit:git-mailsplit[1]. + apply.ignorewhitespace:: When set to 'change', tells 'git apply' to ignore changes in whitespace, in the same way as the '--ignore-space-change' @@ -678,11 +694,29 @@ color.grep:: `never`), never. When set to `true` or `auto`, use color only when the output is written to the terminal. Defaults to `false`. -color.grep.match:: - Use customized color for matches. The value of this variable - may be specified as in color.branch.<slot>. It is passed using - the environment variables 'GREP_COLOR' and 'GREP_COLORS' when - calling an external 'grep'. +color.grep.<slot>:: + Use customized color for grep colorization. `<slot>` specifies which + part of the line to use the specified color, and is one of ++ +-- +`context`;; + non-matching text in context lines (when using `-A`, `-B`, or `-C`) +`filename`;; + filename prefix (when not using `-h`) +`function`;; + function name lines (when using `-p`) +`linenumber`;; + line number prefix (when using `-n`) +`match`;; + matching text +`selected`;; + non-matching text in selected lines +`separator`;; + separators between fields on a line (`:`, `-`, and `=`) + and between hunks (`--`) +-- ++ +The values of these variables may be specified as in color.branch.<slot>. color.interactive:: When set to `always`, always use colors for interactive prompts @@ -882,7 +916,7 @@ format.signoff:: gc.aggressiveWindow:: The window size parameter used in the delta compression algorithm used by 'git gc --aggressive'. This defaults - to 10. + to 250. gc.auto:: When there are approximately more than this many loose @@ -1200,6 +1234,10 @@ imap:: The configuration variables in the 'imap' section are described in linkgit:git-imap-send[1]. +init.templatedir:: + Specify the directory from which templates will be copied. + (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) + instaweb.browser:: Specify the program that will be used to browse your working repository in gitweb. See linkgit:git-instaweb[1]. @@ -1232,6 +1270,13 @@ log.date:: following alternatives: {relative,local,default,iso,rfc,short}. See linkgit:git-log[1]. +log.decorate:: + Print out the ref names of any commits that are shown by the log + command. If 'short' is specified, the ref name prefixes 'refs/heads/', + 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is + specified, the full ref name (including prefix) will be printed. + This is the same as the log commands '--decorate' option. + log.showroot:: If true, the initial commit will be shown as a big creation event. This is equivalent to a diff against an empty tree. @@ -1300,6 +1345,53 @@ mergetool.keepTemporaries:: mergetool.prompt:: Prompt before each invocation of the merge resolution program. +notes.displayRef:: + The (fully qualified) refname from which to show notes when + showing commit messages. The value of this variable can be set + to a glob, in which case notes from all matching refs will be + shown. You may also specify this configuration variable + several times. A warning will be issued for refs that do not + exist, but a glob that does not match any refs is silently + ignored. ++ +This setting can be overridden with the `GIT_NOTES_DISPLAY_REF` +environment variable, which must be a colon separated list of refs or +globs. ++ +The effective value of "core.notesRef" (possibly overridden by +GIT_NOTES_REF) is also implicitly added to the list of refs to be +displayed. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`) and this variable is set to `true`, git + automatically copies your notes from the original to the + rewritten commit. Defaults to `true`, but see + "notes.rewriteRef" below. + +notes.rewriteMode:: + When copying notes during a rewrite (see the + "notes.rewrite.<command>" option), determines what to do if + the target commit already has a note. Must be one of + `overwrite`, `concatenate`, or `ignore`. Defaults to + `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. The ref may be a + glob, in which case notes in all matching refs will be copied. + You may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_REF` +environment variable, which must be a colon separated list of refs or +globs. + pack.window:: The size of the window used by linkgit:git-pack-objects[1] when no window size is given on the command line. Defaults to 10. @@ -1439,7 +1531,7 @@ receive.denyCurrentBranch:: out of sync with the index and working tree. If set to "warn", print a warning of such a push to stderr, but allow the push to proceed. If set to false or "ignore", allow such pushes with no - message. Defaults to "warn". + message. Defaults to "refuse". receive.denyNonFastForwards:: If set to true, git-receive-pack will deny a ref update which is @@ -1559,6 +1651,7 @@ sendemail.smtppass:: sendemail.suppresscc:: sendemail.suppressfrom:: sendemail.to:: +sendemail.smtpdomain:: sendemail.smtpserver:: sendemail.smtpserverport:: sendemail.smtpuser:: |