diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 256 |
1 files changed, 217 insertions, 39 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index e43d147825..478b9431e0 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -79,18 +79,84 @@ escape sequences) are invalid. Includes ~~~~~~~~ -You can include one config file from another by setting the special -`include.path` variable to the name of the file to be included. The -variable takes a pathname as its value, and is subject to tilde -expansion. +The `include` and `includeIf` sections allow you to include config +directives from another source. These sections behave identically to +each other with the exception that `includeIf` sections may be ignored +if their condition does not evaluate to true; see "Conditional includes" +below. -The -included file is expanded immediately, as if its contents had been -found at the location of the include directive. If the value of the -`include.path` variable is a relative path, the path is considered to be -relative to the configuration file in which the include directive was -found. See below for examples. +You can include a config file from another by setting the special +`include.path` (or `includeIf.*.path`) variable to the name of the file +to be included. The variable takes a pathname as its value, and is +subject to tilde expansion. These variables can be given multiple times. +The contents of the included file are inserted immediately, as if they +had been found at the location of the include directive. If the value of the +variable is a relative path, the path is considered to +be relative to the configuration file in which the include directive +was found. See below for examples. + +Conditional includes +~~~~~~~~~~~~~~~~~~~~ + +You can include a config file from another conditionally by setting a +`includeIf.<condition>.path` variable to the name of the file to be +included. + +The condition starts with a keyword followed by a colon and some data +whose format and meaning depends on the keyword. Supported keywords +are: + +`gitdir`:: + + The data that follows the keyword `gitdir:` is used as a glob + pattern. If the location of the .git directory matches the + pattern, the include condition is met. ++ +The .git location may be auto-discovered, or come from `$GIT_DIR` +environment variable. If the repository is auto discovered via a .git +file (e.g. from submodules, or a linked worktree), the .git location +would be the final location where the .git directory is, not where the +.git file is. ++ +The pattern can contain standard globbing wildcards and two additional +ones, `**/` and `/**`, that can match multiple path components. Please +refer to linkgit:gitignore[5] for details. For convenience: + + * If the pattern starts with `~/`, `~` will be substituted with the + content of the environment variable `HOME`. + + * If the pattern starts with `./`, it is replaced with the directory + containing the current config file. + + * If the pattern does not start with either `~/`, `./` or `/`, `**/` + will be automatically prepended. For example, the pattern `foo/bar` + becomes `**/foo/bar` and would match `/any/path/to/foo/bar`. + + * If the pattern ends with `/`, `**` will be automatically added. For + example, the pattern `foo/` becomes `foo/**`. In other words, it + matches "foo" and everything inside, recursively. + +`gitdir/i`:: + This is the same as `gitdir` except that matching is done + case-insensitively (e.g. on case-insensitive file sytems) + +A few more notes on matching via `gitdir` and `gitdir/i`: + + * Symlinks in `$GIT_DIR` are not resolved before matching. + + * Both the symlink & realpath versions of paths will be matched + outside of `$GIT_DIR`. E.g. if ~/git is a symlink to + /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git` + will match. ++ +This was not the case in the initial release of this feature in +v2.13.0, which only matched the realpath version. Configuration that +wants to be compatible with the initial release of this feature needs +to either specify only the realpath version, or both versions. + + * Note that "../" is not special and will match literally, which is + unlikely what you want. Example ~~~~~~~ @@ -116,9 +182,26 @@ Example [include] path = /path/to/foo.inc ; include by absolute path - path = foo ; expand "foo" relative to the current file - path = ~/foo ; expand "foo" in your `$HOME` directory + path = foo.inc ; find "foo.inc" relative to the current file + path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory + + ; include if $GIT_DIR is /path/to/foo/.git + [includeIf "gitdir:/path/to/foo/.git"] + path = /path/to/foo.inc + + ; include for all repositories inside /path/to/group + [includeIf "gitdir:/path/to/group/"] + path = /path/to/foo.inc + + ; include for all repositories inside $HOME/to/group + [includeIf "gitdir:~/to/group/"] + path = /path/to/foo.inc + ; relative paths are always relative to the including + ; file (if the condition is true); their location is not + ; affected by the condition + [includeIf "gitdir:/path/to/group/"] + path = foo.inc Values ~~~~~~ @@ -133,15 +216,15 @@ boolean:: synonyms are accepted for 'true' and 'false'; these are all case-insensitive. - true;; Boolean true can be spelled as `yes`, `on`, `true`, - or `1`. Also, a variable defined without `= <value>` + true;; Boolean true literals are `yes`, `on`, `true`, + and `1`. Also, a variable defined without `= <value>` is taken as true. - false;; Boolean false can be spelled as `no`, `off`, - `false`, or `0`. + false;; Boolean false literals are `no`, `off`, `false`, + `0` and the empty string. + When converting value to the canonical form using `--bool` type -specifier; 'git config' will ensure that the output is "true" or +specifier, 'git config' will ensure that the output is "true" or "false" (spelled in lowercase). integer:: @@ -265,6 +348,9 @@ advice.*:: rmHints:: In case of failure in the output of linkgit:git-rm[1], show directions on how to proceed from the current state. + addEmbeddedRepo:: + Advice on what to do when you've accidentally added one + git repo inside of another. -- core.fileMode:: @@ -272,7 +358,7 @@ core.fileMode:: is to be honored. + Some filesystems lose the executable bit when a file that is -marked as executable is checked out, or checks out an +marked as executable is checked out, or checks out a non-executable file with executable bit on. linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem to see if it handles the executable bit correctly @@ -334,6 +420,10 @@ core.trustctime:: crawlers and some backup systems). See linkgit:git-update-index[1]. True by default. +core.splitIndex:: + If true, the split-index feature of the index will be used. + See linkgit:git-update-index[1]. False by default. + core.untrackedCache:: Determines what to do about the untracked cache feature of the index. It will be kept, if this variable is unset or set to @@ -350,16 +440,19 @@ core.checkStat:: all fields, including the sub-second part of mtime and ctime. core.quotePath:: - The commands that output paths (e.g. 'ls-files', - 'diff'), when not given the `-z` option, will quote - "unusual" characters in the pathname by enclosing the - pathname in a double-quote pair and with backslashes the - same way strings in C source code are quoted. If this - variable is set to false, the bytes higher than 0x80 are - not quoted but output as verbatim. Note that double - quote, backslash and control characters are always - quoted without `-z` regardless of the setting of this - variable. + Commands that output paths (e.g. 'ls-files', 'diff'), will + quote "unusual" characters in the pathname by enclosing the + pathname in double-quotes and escaping those characters with + backslashes in the same way C escapes control characters (e.g. + `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with + values larger than 0x80 (e.g. octal `\302\265` for "micro" in + UTF-8). If this variable is set to false, bytes higher than + 0x80 are not considered "unusual" any more. Double-quotes, + backslash and control characters are always escaped regardless + of the setting of this variable. A simple space character is + not considered "unusual". Many commands can output pathnames + completely verbatim using the `-z` option. The default value + is true. core.eol:: Sets the line ending type to use in the working directory for @@ -593,7 +686,8 @@ core.packedGitLimit:: bytes at once to complete an operation it will unmap existing regions to reclaim virtual address space within the process. + -Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms. +Default is 256 MiB on 32 bit platforms and 32 TiB (effectively +unlimited) on 64 bit platforms. This should be reasonable for all users/operating systems, except on the largest projects. You probably do not need to adjust this value. + @@ -793,6 +887,7 @@ core.abbrev:: computed based on the approximate number of packed objects in your repository, which hopefully is enough for abbreviated object names to stay unique for some time. + The minimum length is 4. add.ignoreErrors:: add.ignore-errors (deprecated):: @@ -1068,7 +1163,10 @@ color.status.<slot>:: `untracked` (files which are not tracked by Git), `branch` (the current branch), `nobranch` (the color the 'no branch' warning is shown in, defaulting - to red), or + to red), + `localBranch` or `remoteBranch` (the local and remote branch names, + respectively, when branch and tracking information is displayed in the + status short-format), or `unmerged` (files which have unmerged changes). color.ui:: @@ -1925,7 +2023,10 @@ http.<url>.*:: must match exactly between the config key and the URL. . Host/domain name (e.g., `example.com` in `https://example.com/`). - This field must match exactly between the config key and the URL. + This field must match between the config key and the URL. It is + possible to specify a `*` as part of the host name to match all subdomains + at this level. `https://*.example.com/` for example would match + `https://foo.example.com/`, but not `https://foo.bar.example.com/`. . Port number (e.g., `8080` in `http://example.com:8080/`). This field must match exactly between the config key and the URL. @@ -1960,6 +2061,17 @@ Environment variable settings always override any matches. The URLs that are matched against are those given directly to Git commands. This means any URLs visited as a result of a redirection do not participate in matching. +ssh.variant:: + Depending on the value of the environment variables `GIT_SSH` or + `GIT_SSH_COMMAND`, or the config setting `core.sshCommand`, Git + auto-detects whether to adjust its command-line parameters for use + with plink or tortoiseplink, as opposed to the default (OpenSSH). ++ +The config variable `ssh.variant` can be set to override this auto-detection; +valid values are `ssh`, `plink`, `putty` or `tortoiseplink`. Any other value +will be treated as normal ssh. This setting can be overridden via the +environment variable `GIT_SSH_VARIANT`. + i18n.commitEncoding:: Character encoding the commit messages are stored in; Git itself does not care per se, but this information is necessary e.g. when @@ -2057,6 +2169,10 @@ log.showRoot:: Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which normally hide the root commit will now show it. True by default. +log.showSignature:: + If true, makes linkgit:git-log[1], linkgit:git-show[1], and + linkgit:git-whatchanged[1] assume `--show-signature`. + log.mailmap:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and linkgit:git-whatchanged[1] assume `--use-mailmap`. @@ -2508,7 +2624,7 @@ rebase.autoSquash:: If set to true enable `--autosquash` option by default. rebase.autoStash:: - When set to true, automatically create a temporary stash + When set to true, automatically create a temporary stash entry before the operation begins, and apply it after the operation ends. This means that you can run rebase on a dirty worktree. However, use with care: the final stash application after a @@ -2537,9 +2653,8 @@ receive.advertiseAtomic:: capability, set this variable to false. receive.advertisePushOptions:: - By default, git-receive-pack will advertise the push options - capability to its clients. If you don't want to advertise this - capability, set this variable to false. + When set to true, git-receive-pack will advertise the push options + capability to its clients. False by default. receive.autogc:: By default, git-receive-pack will run "git-gc --auto" after @@ -2831,10 +2946,45 @@ sendemail.xmailer:: sendemail.signedoffcc (deprecated):: Deprecated alias for `sendemail.signedoffbycc`. +sendemail.smtpBatchSize:: + Number of messages to be sent per connection, after that a relogin + will happen. If the value is 0 or undefined, send all messages in + one connection. + See also the `--batch-size` option of linkgit:git-send-email[1]. + +sendemail.smtpReloginDelay:: + Seconds wait before reconnecting to smtp server. + See also the `--relogin-delay` option of linkgit:git-send-email[1]. + showbranch.default:: The default set of branches for linkgit:git-show-branch[1]. See linkgit:git-show-branch[1]. +splitIndex.maxPercentChange:: + When the split index feature is used, this specifies the + percent of entries the split index can contain compared to the + total number of entries in both the split index and the shared + index before a new shared index is written. + The value should be between 0 and 100. If the value is 0 then + a new shared index is always written, if it is 100 a new + shared index is never written. + By default the value is 20, so a new shared index is written + if the number of entries in the split index would be greater + than 20 percent of the total number of entries. + See linkgit:git-update-index[1]. + +splitIndex.sharedIndexExpire:: + When the split index feature is used, shared index files that + were not modified since the time this variable specifies will + be removed when a new shared index file is created. The value + "now" expires all entries immediately, and "never" suppresses + expiration altogether. + The default value is "2.weeks.ago". + Note that a shared index file is considered modified (for the + purpose of expiration) each time a new split-index file is + either created based on it or read from it. + See linkgit:git-update-index[1]. + status.relativePaths:: By default, linkgit:git-status[1] shows paths relative to the current directory. Setting this variable to `false` shows paths @@ -2856,6 +3006,11 @@ status.displayCommentPrefix:: behavior of linkgit:git-status[1] in Git 1.8.4 and previous. Defaults to false. +status.showStash:: + If set to true, linkgit:git-status[1] will display the number of + entries currently stashed away. + Defaults to false. + status.showUntrackedFiles:: By default, linkgit:git-status[1] and linkgit:git-commit[1] show files which are not currently tracked by Git. Directories which @@ -2893,20 +3048,21 @@ status.submoduleSummary:: stash.showPatch:: If this is set to true, the `git stash show` command without an - option will show the stash in patch form. Defaults to false. + option will show the stash entry in patch form. Defaults to false. See description of 'show' command in linkgit:git-stash[1]. stash.showStat:: If this is set to true, the `git stash show` command without an - option will show diffstat of the stash. Defaults to true. + option will show diffstat of the stash entry. Defaults to true. See description of 'show' command in linkgit:git-stash[1]. submodule.<name>.url:: The URL for a submodule. This variable is copied from the .gitmodules file to the git config via 'git submodule init'. The user can change the configured URL before obtaining the submodule via 'git submodule - update'. After obtaining the submodule, the presence of this variable - is used as a sign whether the submodule is of interest to git commands. + update'. If neither submodule.<name>.active or submodule.active are + set, the presence of this variable is used as a fallback to indicate + whether the submodule is of interest to git commands. See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. submodule.<name>.update:: @@ -2944,6 +3100,21 @@ submodule.<name>.ignore:: "--ignore-submodules" option. The 'git submodule' commands are not affected by this setting. +submodule.<name>.active:: + Boolean value indicating if the submodule is of interest to git + commands. This config option takes precedence over the + submodule.active config option. + +submodule.active:: + A repeated field which contains a pathspec used to match against a + submodule's path to determine if the submodule is of interest to git + commands. + +submodule.recurse:: + Specifies if commands recurse into submodules by default. This + applies to all commands that have a `--recurse-submodules` option. + Defaults to false. + submodule.fetchJobs:: Specifies how many submodules are fetched/cloned at the same time. A positive integer allows up to that number of submodules fetched @@ -3089,6 +3260,13 @@ url.<base>.insteadOf:: the best alternative for the particular user, even for a never-before-seen repository on the site. When more than one insteadOf strings match a given URL, the longest match is used. ++ +Note that any protocol restrictions will be applied to the rewritten +URL. If the rewrite changes the URL to use a custom protocol or remote +helper, you may need to adjust the `protocol.*.allow` config to permit +the request. In particular, protocols you expect to use for submodules +must be set to `always` rather than the default of `user`. See the +description of `protocol.allow` above. url.<base>.pushInsteadOf:: Any URL that starts with this value will not be pushed to; |