diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 135 |
1 files changed, 108 insertions, 27 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index 5f4d7939ed..cd2d6514e1 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -78,8 +78,8 @@ be escaped: use `\"` for `"` and `\\` for `\`. The following escape sequences (beside `\"` and `\\`) are recognized: `\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB) -and `\b` for backspace (BS). No other char escape sequence, nor octal -char sequences are valid. +and `\b` for backspace (BS). Other char escape sequences (including octal +escape sequences) are invalid. Variable values ending in a `\` are continued on the next line in the customary UNIX fashion. @@ -131,8 +131,13 @@ Variables Note that this list is non-comprehensive and not necessarily complete. For command-specific variables, you will find a more detailed description -in the appropriate manual page. You will find a description of non-core -porcelain configuration variables in the respective porcelain documentation. +in the appropriate manual page. + +Other git-related tools may and do use their own variables. When +inventing new variables for use in your own tool, make sure their +names do not conflict with those that are used by Git itself and +other popular tools, and describe them in your documentation. + advice.*:: These variables control various optional help messages designed to @@ -142,19 +147,13 @@ advice.*:: -- pushUpdateRejected:: Set this variable to 'false' if you want to disable - 'pushNonFFCurrent', 'pushNonFFDefault', + 'pushNonFFCurrent', 'pushNonFFMatching', 'pushAlreadyExists', 'pushFetchFirst', and 'pushNeedsForce' simultaneously. pushNonFFCurrent:: Advice shown when linkgit:git-push[1] fails due to a non-fast-forward update to the current branch. - pushNonFFDefault:: - Advice to set 'push.default' to 'upstream' or 'current' - when you ran linkgit:git-push[1] and pushed 'matching - refs' by default (i.e. you did not provide an explicit - refspec, and no 'push.default' configuration was set) - and it resulted in a non-fast-forward error. pushNonFFMatching:: Advice shown when you ran linkgit:git-push[1] and pushed 'matching refs' explicitly (i.e. you used ':', or @@ -382,7 +381,7 @@ false), while all other repositories are assumed to be bare (bare core.worktree:: Set the path to the root of the working tree. This can be overridden by the GIT_WORK_TREE environment - variable and the '--work-tree' command line option. + variable and the '--work-tree' command-line option. The value can be an absolute path or relative to the path to the .git directory, which is either specified by --git-dir or GIT_DIR, or automatically discovered. @@ -490,7 +489,7 @@ core.deltaBaseCacheLimit:: to avoid unpacking and decompressing frequently used base objects multiple times. + -Default is 16 MiB on all platforms. This should be reasonable +Default is 96 MiB on all platforms. This should be reasonable for all users/operating systems, except on the largest projects. You probably do not need to adjust this value. + @@ -524,7 +523,7 @@ core.askpass:: environment variable. If not set, fall back to the value of the 'SSH_ASKPASS' environment variable or, failing that, a simple password prompt. The external program shall be given a suitable prompt as - command line argument and write the password on its STDOUT. + command-line argument and write the password on its STDOUT. core.attributesfile:: In addition to '.gitattributes' (per-directory) and @@ -545,6 +544,9 @@ core.commentchar:: messages consider a line that begins with this character commented, and removes them after the editor returns (default '#'). ++ +If set to "auto", `git-commit` would select a character that is not +the beginning character of any line in existing commit messages. sequence.editor:: Text editor used by `git rebase -i` for editing the rebase instruction file. @@ -559,14 +561,19 @@ core.pager:: configuration, then `$PAGER`, and then the default chosen at compile time (usually 'less'). + -When the `LESS` environment variable is unset, Git sets it to `FRSX` +When the `LESS` environment variable is unset, Git sets it to `FRX` (if `LESS` environment variable is set, Git does not change it at all). If you want to selectively override Git's default setting -for `LESS`, you can set `core.pager` to e.g. `less -+S`. This will +for `LESS`, you can set `core.pager` to e.g. `less -S`. This will be passed to the shell by Git, which will translate the final -command to `LESS=FRSX less -+S`. The environment tells the command -to set the `S` option to chop long lines but the command line -resets it to the default to fold long lines. +command to `LESS=FRX less -S`. The environment does not set the +`S` option but the command line does, instructing less to truncate +long lines. Similarly, setting `core.pager` to `less -+F` will +deactivate the `F` option specified by the environment from the +command-line, deactivating the "quit if one screen" behavior of +`less`. One can specifically activate some flags for particular +commands: for example, setting `pager.blame` to `less -S` enables +line truncation only for `git blame`. + Likewise, when the `LV` environment variable is unset, Git sets it to `-c`. You can override this setting by exporting `LV` with @@ -827,7 +834,7 @@ color.diff:: commands will only use color when output is to the terminal. Defaults to false. + -This does not affect linkgit:git-format-patch[1] nor the +This does not affect linkgit:git-format-patch[1] or the 'git-diff-{asterisk}' plumbing commands. Can be overridden on the command line with the `--color[=<when>]` option. @@ -992,6 +999,14 @@ commit.cleanup:: have to remove the help lines that begin with `#` in the commit log template yourself, if you do this). +commit.gpgsign:: + + A boolean to specify whether all commits should be GPG signed. + Use of this option when doing operations such as rebase can + result in a large number of commits being signed. It may be + convenient to use an agent to avoid typing your GPG passphrase + several times. + commit.status:: A boolean to enable/disable inclusion of status information in the commit message template when using an editor to prepare the commit @@ -1149,6 +1164,11 @@ filter.<driver>.smudge:: object to a worktree file upon checkout. See linkgit:gitattributes[5] for details. +gc.aggressiveDepth:: + The depth parameter used in the delta compression + algorithm used by 'git gc --aggressive'. This defaults + to 250. + gc.aggressiveWindow:: The window size parameter used in the delta compression algorithm used by 'git gc --aggressive'. This defaults @@ -1167,6 +1187,10 @@ gc.autopacklimit:: --auto` consolidates them into one larger pack. The default value is 50. Setting this to 0 disables it. +gc.autodetach:: + Make `git gc --auto` return immediately andrun in background + if the system supports it. Default is true. + gc.packrefs:: Running `git pack-refs` in a repository renders it unclonable by Git versions prior to 1.5.1.2 over dumb @@ -1308,7 +1332,7 @@ grep.extendedRegexp:: gpg.program:: Use this custom program instead of "gpg" found on $PATH when making or verifying a PGP signature. The program must support the - same command line interface as GPG, namely, to verify a detached + same command-line interface as GPG, namely, to verify a detached signature, "gpg --verify $file - <$signature" is run, and the program is expected to signal a good signature by exiting with code 0, and to generate an ascii-armored detached signature, the @@ -1324,6 +1348,10 @@ gui.diffcontext:: Specifies how many context lines should be used in calls to diff made by the linkgit:git-gui[1]. The default is "5". +gui.displayuntracked:: + Determines if linkgit::git-gui[1] shows untracked files + in the file list. The default is "true". + gui.encoding:: Specifies the default encoding to use for displaying of file contents in linkgit:git-gui[1] and linkgit:gitk[1]. @@ -1601,6 +1629,10 @@ imap:: The configuration variables in the 'imap' section are described in linkgit:git-imap-send[1]. +index.version:: + Specify the version with which new index files should be + initialized. This does not affect existing repositories. + init.templatedir:: Specify the directory from which templates will be copied. (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) @@ -1633,7 +1665,7 @@ interactive.singlekey:: linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this setting is silently ignored if portable keystroke input - is not available. + is not available; requires the Perl module Term::ReadKey. log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and @@ -1862,6 +1894,31 @@ pack.packSizeLimit:: Common unit suffixes of 'k', 'm', or 'g' are supported. +pack.useBitmaps:: + When true, git will use pack bitmaps (if available) when packing + to stdout (e.g., during the server side of a fetch). Defaults to + true. You should not generally need to turn this off unless + you are debugging pack bitmaps. + +pack.writebitmaps:: + When true, git will write a bitmap index when packing all + objects to disk (e.g., when `git repack -a` is run). This + index can speed up the "counting objects" phase of subsequent + packs created for clones and fetches, at the cost of some disk + space and extra time spent on the initial repack. Defaults to + false. + +pack.writeBitmapHashCache:: + When true, git will include a "hash cache" section in the bitmap + index (if one is written). This cache can be used to feed git's + delta heuristics, potentially leading to better deltas between + bitmapped and non-bitmapped objects (e.g., when serving a fetch + between an older, bitmapped pack and objects that have been + pushed since the last gc). The downside is that it consumes 4 + bytes per object of disk space, and that JGit's bitmap + implementation does not understand it, causing it to complain if + Git and JGit are used on the same repository. Defaults to false. + pager.<cmd>:: If the value is boolean, turns on or off pagination of the output of a particular Git subcommand when writing to a tty. @@ -1881,6 +1938,16 @@ pretty.<name>:: Note that an alias with the same name as a built-in format will be silently ignored. +pull.ff:: + By default, Git does not create an extra merge commit when merging + a commit that is a descendant of the current commit. Instead, the + tip of the current branch is fast-forwarded. When set to `false`, + this variable tells Git to create an extra merge commit in such + a case (equivalent to giving the `--no-ff` option from the command + line). When set to `only`, only such fast-forward merges are + allowed (equivalent to giving the `--ff-only` option from the + command line). + pull.rebase:: When true, rebase branches on top of the fetched branch, instead of merging the default branch from the default remote when "git @@ -1933,7 +2000,7 @@ When pushing to a remote that is different from the remote you normally pull from, work as `current`. This is the safest option and is suited for beginners. + -This mode will become the default in Git 2.0. +This mode has become the default in Git 2.0. * `matching` - push all branches having the same name on both ends. This makes the repository you are pushing to remember the set of @@ -1952,8 +2019,8 @@ suitable for pushing into a shared central repository, as other people may add new branches there, or update the tip of existing branches outside your control. + -This is currently the default, but Git 2.0 will change the default -to `simple`. +This used to be the default, but not since Git 2.0 (`simple` is the +new default). -- @@ -2111,6 +2178,13 @@ repack.usedeltabaseoffset:: "false" and repack. Access from old Git versions over the native protocol are unaffected by this option. +repack.packKeptObjects:: + If set to true, makes `git repack` act as if + `--pack-kept-objects` was passed. See linkgit:git-repack[1] for + details. Defaults to `false` normally, but `true` if a bitmap + index is being written (either via `--write-bitmap-index` or + `pack.writeBitmaps`). + rerere.autoupdate:: When set to true, `git-rerere` updates the index with the resulting contents after it cleanly resolves conflicts using @@ -2229,7 +2303,7 @@ status.submodulesummary:: submodules when `diff.ignoreSubmodules` is set to 'all' or only for those submodules where `submodule.<name>.ignore=all`. To also view the summary for ignored submodules you can either use - the --ignore-submodules=dirty command line option or the 'git + the --ignore-submodules=dirty command-line option or the 'git submodule summary' command, which shows a similar output but does not honor these settings. @@ -2251,7 +2325,7 @@ submodule.<name>.branch:: submodule.<name>.fetchRecurseSubmodules:: This option can be used to control recursive fetching of this submodule. It can be overridden by using the --[no-]recurse-submodules - command line option to "git fetch" and "git pull". + command-line option to "git fetch" and "git pull". This setting will override that from in the linkgit:gitmodules[5] file. @@ -2291,6 +2365,13 @@ transfer.unpackLimit:: not set, the value of this variable is used instead. The default value is 100. +uploadarchive.allowUnreachable:: + If true, allow clients to use `git archive --remote` to request + any tree, whether reachable from the ref tips or not. See the + discussion in the `SECURITY` section of + linkgit:git-upload-archive[1] for more details. Defaults to + `false`. + uploadpack.hiderefs:: String(s) `upload-pack` uses to decide which refs to omit from its initial advertisement. Use more than one |