diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 102 |
1 files changed, 84 insertions, 18 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index be0b8cacaa..a1e36d7e42 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -126,12 +126,20 @@ advice.*:: Directions on how to stage/unstage/add shown in the output of linkgit:git-status[1] and the template shown when writing commit messages. Default: true. + commitBeforeMerge:: + Advice shown when linkgit:git-merge[1] refuses to + merge to avoid overwritting local changes. + Default: true. -- core.fileMode:: If false, the executable bit differences between the index and the working copy are ignored; useful on broken filesystems like FAT. - See linkgit:git-update-index[1]. True by default. + See linkgit:git-update-index[1]. ++ +The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.fileMode false if appropriate when the +repository is created. core.ignoreCygwinFSTricks:: This option is only used by Cygwin implementation of Git. If false, @@ -144,6 +152,18 @@ core.ignoreCygwinFSTricks:: is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's POSIX emulation is required to support core.filemode. +core.ignorecase:: + If true, this option enables various workarounds to enable + git to work better on filesystems that are not case sensitive, + like FAT. For example, if a directory listing finds + "makefile" when git expects "Makefile", git will assume + it is really the same file, and continue to remember it as + "Makefile". ++ +The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.ignorecase true if appropriate when the repository +is created. + core.trustctime:: If false, the ctime differences between the index and the working copy are ignored; useful when the inode change time @@ -169,9 +189,10 @@ core.autocrlf:: writing to the filesystem. The variable can be set to 'input', in which case the conversion happens only while reading from the filesystem but files are written out with - `LF` at the end of lines. Currently, which paths to consider - "text" (i.e. be subjected to the autocrlf mechanism) is - decided purely based on the contents. + `LF` at the end of lines. A file is considered + "text" (i.e. be subjected to the autocrlf mechanism) based on + the file's `crlf` attribute, or if `crlf` is unspecified, + based on the file's contents. See linkgit:gitattributes[5]. core.safecrlf:: If true, makes git check if converting `CRLF` as controlled by @@ -223,7 +244,11 @@ core.symlinks:: contain the link text. linkgit:git-update-index[1] and linkgit:git-add[1] will not change the recorded type to regular file. Useful on filesystems like FAT that do not support - symbolic links. True by default. + symbolic links. ++ +The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.symlinks false if appropriate when the repository +is created. core.gitProxy:: A "proxy command" to execute (as 'command host port') instead @@ -380,16 +405,15 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesfile:: In addition to '.gitignore' (per-directory) and '.git/info/exclude', git looks into this file for patterns - of files which are not meant to be tracked. See - linkgit:gitignore[5]. + of files which are not meant to be tracked. "{tilde}/" is expanded + to the value of `$HOME` and "{tilde}user/" to the specified user's + home directory. See linkgit:gitignore[5]. core.editor:: Commands such as `commit` and `tag` that lets you edit messages by launching an editor uses the value of this variable when it is set, and the environment variable - `GIT_EDITOR` is not set. The order of preference is - `GIT_EDITOR` environment, `core.editor`, `VISUAL` and - `EDITOR` environment variables and then finally `vi`. + `GIT_EDITOR` is not set. See linkgit:git-var[1]. core.pager:: The command that git will use to paginate output. Can @@ -416,13 +440,17 @@ core.whitespace:: consider them as errors. You can prefix `-` to disable any of them (e.g. `-trailing-space`): + -* `trailing-space` treats trailing whitespaces at the end of the line +* `blank-at-eol` treats trailing whitespaces at the end of the line as an error (enabled by default). * `space-before-tab` treats a space character that appears immediately before a tab character in the initial indent part of the line as an error (enabled by default). * `indent-with-non-tab` treats a line that is indented with 8 or more space characters as an error (not enabled by default). +* `blank-at-eof` treats blank lines added at the end of file as an error + (enabled by default). +* `trailing-space` is a short-hand to cover both `blank-at-eol` and + `blank-at-eof`. * `cr-at-eol` treats a carriage-return at the end of line as part of the line terminator, i.e. with it, `trailing-space` does not trigger if the character before such a carriage-return @@ -454,6 +482,19 @@ On some file system/operating system combinations, this is unreliable. Set this config setting to 'rename' there; However, This will remove the check that makes sure that existing object files will not get overwritten. +core.notesRef:: + When showing commit messages, also show notes which are stored in + the given ref. This ref is expected to contain files named + after the full SHA-1 of the commit they annotate. ++ +If such a file exists in the given ref, the referenced blob is read, and +appended to the commit message, separated by a "Notes:" line. If the +given ref itself does not exist, it is not an error, but means that no +notes should be printed. ++ +This setting defaults to "refs/notes/commits", and can be overridden by +the `GIT_NOTES_REF` environment variable. + add.ignore-errors:: Tells 'git-add' to continue adding files when some files cannot be added due to indexing errors. Equivalent to the '--ignore-errors' @@ -539,7 +580,7 @@ branch.<name>.merge:: branch.<name>.mergeoptions:: Sets default options for merging into branch <name>. The syntax and - supported options are equal to that of linkgit:git-merge[1], but + supported options are the same as those of linkgit:git-merge[1], but option values containing whitespace characters are currently not supported. @@ -594,10 +635,10 @@ color.diff.<slot>:: Use customized color for diff colorization. `<slot>` specifies which part of the patch to use the specified color, and is one of `plain` (context text), `meta` (metainformation), `frag` - (hunk header), `old` (removed lines), `new` (added lines), - `commit` (commit headers), or `whitespace` (highlighting - whitespace errors). The values of these variables may be specified as - in color.branch.<slot>. + (hunk header), 'func' (function in hunk header), `old` (removed lines), + `new` (added lines), `commit` (commit headers), or `whitespace` + (highlighting whitespace errors). The values of these variables may be + specified as in color.branch.<slot>. color.grep:: When set to `always`, always highlight matches. When `false` (or @@ -666,6 +707,8 @@ color.ui:: commit.template:: Specify a file to use as the template for new commit messages. + "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + specified user's home directory. diff.autorefreshindex:: When using 'git-diff' to compare with work tree @@ -1089,6 +1132,14 @@ http.maxRequests:: How many HTTP requests to launch in parallel. Can be overridden by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. +http.postBuffer:: + Maximum size in bytes of the buffer used by smart HTTP + transports when POSTing data to the remote system. + For requests larger than this buffer size, HTTP/1.1 and + Transfer-Encoding: chunked is used to avoid creating a + massive pack file locally. Default is 1 MiB, which is + sufficient for most requests. + http.lowSpeedLimit, http.lowSpeedTime:: If the HTTP transfer speed is less than 'http.lowSpeedLimit' for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. @@ -1320,6 +1371,11 @@ rebase.stat:: Whether to show a diffstat of what changed upstream since the last rebase. False by default. +receive.autogc:: + By default, git-receive-pack will run "git-gc --auto" after + receiving data from git-push and updating refs. You can stop + it by setting this variable to false. + receive.fsckObjects:: If it is set to true, git-receive-pack will check all received objects. It will abort in the case of a malformed object or a @@ -1351,10 +1407,14 @@ receive.denyCurrentBranch:: receive.denyNonFastForwards:: If set to true, git-receive-pack will deny a ref update which is - not a fast forward. Use this to prevent such an update via a push, + not a fast-forward. Use this to prevent such an update via a push, even if that push is forced. This configuration variable is set when initializing a shared repository. +receive.updateserverinfo:: + If set to true, git-receive-pack will run git-update-server-info + after receiving data from git-push and updating refs. + remote.<name>.url:: The URL of a remote repository. See linkgit:git-fetch[1] or linkgit:git-push[1]. @@ -1381,7 +1441,13 @@ remote.<name>.mirror:: remote.<name>.skipDefaultUpdate:: If true, this remote will be skipped by default when updating - using the update subcommand of linkgit:git-remote[1]. + using linkgit:git-fetch[1] or the `update` subcommand of + linkgit:git-remote[1]. + +remote.<name>.skipFetchAll:: + If true, this remote will be skipped by default when updating + using linkgit:git-fetch[1] or the `update` subcommand of + linkgit:git-remote[1]. remote.<name>.receivepack:: The default program to execute on the remote side when pushing. See |