diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 1617 |
1 files changed, 1617 insertions, 0 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt new file mode 100644 index 0000000000..a1e36d7e42 --- /dev/null +++ b/Documentation/config.txt @@ -0,0 +1,1617 @@ +CONFIGURATION FILE +------------------ + +The git configuration file contains a number of variables that affect +the git command's behavior. The `.git/config` file in each repository +is used to store the configuration for that repository, and +`$HOME/.gitconfig` is used to store a per-user configuration as +fallback values for the `.git/config` file. The file `/etc/gitconfig` +can be used to store a system-wide default configuration. + +The configuration variables are used by both the git plumbing +and the porcelains. The variables are divided into sections, wherein +the fully qualified variable name of the variable itself is the last +dot-separated segment and the section name is everything before the last +dot. The variable names are case-insensitive and only alphanumeric +characters are allowed. Some variables may appear multiple times. + +Syntax +~~~~~~ + +The syntax is fairly flexible and permissive; whitespaces are mostly +ignored. The '#' and ';' characters begin comments to the end of line, +blank lines are ignored. + +The file consists of sections and variables. A section begins with +the name of the section in square brackets and continues until the next +section begins. Section names are not case sensitive. Only alphanumeric +characters, `-` and `.` are allowed in section names. Each variable +must belong to some section, which means that there must be a section +header before the first setting of a variable. + +Sections can be further divided into subsections. To begin a subsection +put its name in double quotes, separated by space from the section name, +in the section header, like in the example below: + +-------- + [section "subsection"] + +-------- + +Subsection names are case sensitive and can contain any characters except +newline (doublequote `"` and backslash have to be escaped as `\"` and `\\`, +respectively). Section headers cannot span multiple +lines. Variables may belong directly to a section or to a given subsection. +You can have `[section]` if you have `[section "subsection"]`, but you +don't need to. + +There is also a case insensitive alternative `[section.subsection]` syntax. +In this syntax, subsection names follow the same restrictions as for section +names. + +All the other lines (and the remainder of the line after the section +header) are recognized as setting variables, in the form +'name = value'. If there is no equal sign on the line, the entire line +is taken as 'name' and the variable is recognized as boolean "true". +The variable names are case-insensitive and only alphanumeric +characters and `-` are allowed. There can be more than one value +for a given variable; we say then that variable is multivalued. + +Leading and trailing whitespace in a variable value is discarded. +Internal whitespace within a variable value is retained verbatim. + +The values following the equals sign in variable assign are all either +a string, an integer, or a boolean. Boolean values may be given as yes/no, +0/1, true/false or on/off. Case is not significant in boolean values, when +converting value to the canonical form using '--bool' type specifier; +'git-config' will ensure that the output is "true" or "false". + +String values may be entirely or partially enclosed in double quotes. +You need to enclose variable values in double quotes if you want to +preserve leading or trailing whitespace, or if the variable value contains +comment characters (i.e. it contains '#' or ';'). +Double quote `"` and backslash `\` characters in variable values must +be escaped: use `\"` for `"` and `\\` for `\`. + +The following escape sequences (beside `\"` and `\\`) are recognized: +`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB) +and `\b` for backspace (BS). No other char escape sequence, nor octal +char sequences are valid. + +Variable values ending in a `\` are continued on the next line in the +customary UNIX fashion. + +Some variables may require a special value format. + +Example +~~~~~~~ + + # Core variables + [core] + ; Don't trust file modes + filemode = false + + # Our diff algorithm + [diff] + external = /usr/local/bin/diff-wrapper + renames = true + + [branch "devel"] + remote = origin + merge = refs/heads/devel + + # Proxy settings + [core] + gitProxy="ssh" for "kernel.org" + gitProxy=default-proxy ; for the rest + +Variables +~~~~~~~~~ + +Note that this list is non-comprehensive and not necessarily complete. +For command-specific variables, you will find a more detailed description +in the appropriate manual page. You will find a description of non-core +porcelain configuration variables in the respective porcelain documentation. + +advice.*:: + When set to 'true', display the given optional help message. + When set to 'false', do not display. The configuration variables + are: ++ +-- + pushNonFastForward:: + Advice shown when linkgit:git-push[1] refuses + non-fast-forward refs. Default: true. + statusHints:: + Directions on how to stage/unstage/add shown in the + output of linkgit:git-status[1] and the template shown + when writing commit messages. Default: true. + commitBeforeMerge:: + Advice shown when linkgit:git-merge[1] refuses to + merge to avoid overwritting local changes. + Default: true. +-- + +core.fileMode:: + If false, the executable bit differences between the index and + the working copy are ignored; useful on broken filesystems like FAT. + See linkgit:git-update-index[1]. ++ +The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.fileMode false if appropriate when the +repository is created. + +core.ignoreCygwinFSTricks:: + This option is only used by Cygwin implementation of Git. If false, + the Cygwin stat() and lstat() functions are used. This may be useful + if your repository consists of a few separate directories joined in + one hierarchy using Cygwin mount. If true, Git uses native Win32 API + whenever it is possible and falls back to Cygwin functions only to + handle symbol links. The native mode is more than twice faster than + normal Cygwin l/stat() functions. True by default, unless core.filemode + is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's + POSIX emulation is required to support core.filemode. + +core.ignorecase:: + If true, this option enables various workarounds to enable + git to work better on filesystems that are not case sensitive, + like FAT. For example, if a directory listing finds + "makefile" when git expects "Makefile", git will assume + it is really the same file, and continue to remember it as + "Makefile". ++ +The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.ignorecase true if appropriate when the repository +is created. + +core.trustctime:: + If false, the ctime differences between the index and the + working copy are ignored; useful when the inode change time + is regularly modified by something outside Git (file system + crawlers and some backup systems). + See linkgit:git-update-index[1]. True by default. + +core.quotepath:: + The commands that output paths (e.g. 'ls-files', + 'diff'), when not given the `-z` option, will quote + "unusual" characters in the pathname by enclosing the + pathname in a double-quote pair and with backslashes the + same way strings in C source code are quoted. If this + variable is set to false, the bytes higher than 0x80 are + not quoted but output as verbatim. Note that double + quote, backslash and control characters are always + quoted without `-z` regardless of the setting of this + variable. + +core.autocrlf:: + If true, makes git convert `CRLF` at the end of lines in text files to + `LF` when reading from the filesystem, and convert in reverse when + writing to the filesystem. The variable can be set to + 'input', in which case the conversion happens only while + reading from the filesystem but files are written out with + `LF` at the end of lines. A file is considered + "text" (i.e. be subjected to the autocrlf mechanism) based on + the file's `crlf` attribute, or if `crlf` is unspecified, + based on the file's contents. See linkgit:gitattributes[5]. + +core.safecrlf:: + If true, makes git check if converting `CRLF` as controlled by + `core.autocrlf` is reversible. Git will verify if a command + modifies a file in the work tree either directly or indirectly. + For example, committing a file followed by checking out the + same file should yield the original file in the work tree. If + this is not the case for the current setting of + `core.autocrlf`, git will reject the file. The variable can + be set to "warn", in which case git will only warn about an + irreversible conversion but continue the operation. ++ +CRLF conversion bears a slight chance of corrupting data. +autocrlf=true will convert CRLF to LF during commit and LF to +CRLF during checkout. A file that contains a mixture of LF and +CRLF before the commit cannot be recreated by git. For text +files this is the right thing to do: it corrects line endings +such that we have only LF line endings in the repository. +But for binary files that are accidentally classified as text the +conversion can corrupt data. ++ +If you recognize such corruption early you can easily fix it by +setting the conversion type explicitly in .gitattributes. Right +after committing you still have the original file in your work +tree and this file is not yet corrupted. You can explicitly tell +git that this file is binary and git will handle the file +appropriately. ++ +Unfortunately, the desired effect of cleaning up text files with +mixed line endings and the undesired effect of corrupting binary +files cannot be distinguished. In both cases CRLFs are removed +in an irreversible way. For text files this is the right thing +to do because CRLFs are line endings, while for binary files +converting CRLFs corrupts data. ++ +Note, this safety check does not mean that a checkout will generate a +file identical to the original file for a different setting of +`core.autocrlf`, but only for the current one. For example, a text +file with `LF` would be accepted with `core.autocrlf=input` and could +later be checked out with `core.autocrlf=true`, in which case the +resulting file would contain `CRLF`, although the original file +contained `LF`. However, in both work trees the line endings would be +consistent, that is either all `LF` or all `CRLF`, but never mixed. A +file with mixed line endings would be reported by the `core.safecrlf` +mechanism. + +core.symlinks:: + If false, symbolic links are checked out as small plain files that + contain the link text. linkgit:git-update-index[1] and + linkgit:git-add[1] will not change the recorded type to regular + file. Useful on filesystems like FAT that do not support + symbolic links. ++ +The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.symlinks false if appropriate when the repository +is created. + +core.gitProxy:: + A "proxy command" to execute (as 'command host port') instead + of establishing direct connection to the remote server when + using the git protocol for fetching. If the variable value is + in the "COMMAND for DOMAIN" format, the command is applied only + on hostnames ending with the specified domain string. This variable + may be set multiple times and is matched in the given order; + the first match wins. ++ +Can be overridden by the 'GIT_PROXY_COMMAND' environment variable +(which always applies universally, without the special "for" +handling). ++ +The special string `none` can be used as the proxy command to +specify that no proxy be used for a given domain pattern. +This is useful for excluding servers inside a firewall from +proxy use, while defaulting to a common proxy for external domains. + +core.ignoreStat:: + If true, commands which modify both the working tree and the index + will mark the updated paths with the "assume unchanged" bit in the + index. These marked files are then assumed to stay unchanged in the + working copy, until you mark them otherwise manually - Git will not + detect the file changes by lstat() calls. This is useful on systems + where those are very slow, such as Microsoft Windows. + See linkgit:git-update-index[1]. + False by default. + +core.preferSymlinkRefs:: + Instead of the default "symref" format for HEAD + and other symbolic reference files, use symbolic links. + This is sometimes needed to work with old scripts that + expect HEAD to be a symbolic link. + +core.bare:: + If true this repository is assumed to be 'bare' and has no + working directory associated with it. If this is the case a + number of commands that require a working directory will be + disabled, such as linkgit:git-add[1] or linkgit:git-merge[1]. ++ +This setting is automatically guessed by linkgit:git-clone[1] or +linkgit:git-init[1] when the repository was created. By default a +repository that ends in "/.git" is assumed to be not bare (bare = +false), while all other repositories are assumed to be bare (bare += true). + +core.worktree:: + Set the path to the working tree. The value will not be + used in combination with repositories found automatically in + a .git directory (i.e. $GIT_DIR is not set). + This can be overridden by the GIT_WORK_TREE environment + variable and the '--work-tree' command line option. It can be + a absolute path or relative path to the directory specified by + --git-dir or GIT_DIR. + Note: If --git-dir or GIT_DIR are specified but none of + --work-tree, GIT_WORK_TREE and core.worktree is specified, + the current working directory is regarded as the top directory + of your working tree. + +core.logAllRefUpdates:: + Enable the reflog. Updates to a ref <ref> is logged to the file + "$GIT_DIR/logs/<ref>", by appending the new and old + SHA1, the date/time and the reason of the update, but + only when the file exists. If this configuration + variable is set to true, missing "$GIT_DIR/logs/<ref>" + file is automatically created for branch heads. ++ +This information can be used to determine what commit +was the tip of a branch "2 days ago". ++ +This value is true by default in a repository that has +a working directory associated with it, and false by +default in a bare repository. + +core.repositoryFormatVersion:: + Internal variable identifying the repository format and layout + version. + +core.sharedRepository:: + When 'group' (or 'true'), the repository is made shareable between + several users in a group (making sure all the files and objects are + group-writable). When 'all' (or 'world' or 'everybody'), the + repository will be readable by all users, additionally to being + group-shareable. When 'umask' (or 'false'), git will use permissions + reported by umask(2). When '0xxx', where '0xxx' is an octal number, + files in the repository will have this mode value. '0xxx' will override + user's umask value (whereas the other options will only override + requested parts of the user's umask value). Examples: '0660' will make + the repo read/write-able for the owner and group, but inaccessible to + others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a + repository that is group-readable but not group-writable. + See linkgit:git-init[1]. False by default. + +core.warnAmbiguousRefs:: + If true, git will warn you if the ref name you passed it is ambiguous + and might match multiple refs in the .git/refs/ tree. True by default. + +core.compression:: + An integer -1..9, indicating a default compression level. + -1 is the zlib default. 0 means no compression, + and 1..9 are various speed/size tradeoffs, 9 being slowest. + If set, this provides a default to other compression variables, + such as 'core.loosecompression' and 'pack.compression'. + +core.loosecompression:: + An integer -1..9, indicating the compression level for objects that + are not in a pack file. -1 is the zlib default. 0 means no + compression, and 1..9 are various speed/size tradeoffs, 9 being + slowest. If not set, defaults to core.compression. If that is + not set, defaults to 1 (best speed). + +core.packedGitWindowSize:: + Number of bytes of a pack file to map into memory in a + single mapping operation. Larger window sizes may allow + your system to process a smaller number of large pack files + more quickly. Smaller window sizes will negatively affect + performance due to increased calls to the operating system's + memory manager, but may improve performance when accessing + a large number of large pack files. ++ +Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32 +MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should +be reasonable for all users/operating systems. You probably do +not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.packedGitLimit:: + Maximum number of bytes to map simultaneously into memory + from pack files. If Git needs to access more than this many + bytes at once to complete an operation it will unmap existing + regions to reclaim virtual address space within the process. ++ +Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms. +This should be reasonable for all users/operating systems, except on +the largest projects. You probably do not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.deltaBaseCacheLimit:: + Maximum number of bytes to reserve for caching base objects + that multiple deltafied objects reference. By storing the + entire decompressed base objects in a cache Git is able + to avoid unpacking and decompressing frequently used base + objects multiple times. ++ +Default is 16 MiB on all platforms. This should be reasonable +for all users/operating systems, except on the largest projects. +You probably do not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.excludesfile:: + In addition to '.gitignore' (per-directory) and + '.git/info/exclude', git looks into this file for patterns + of files which are not meant to be tracked. "{tilde}/" is expanded + to the value of `$HOME` and "{tilde}user/" to the specified user's + home directory. See linkgit:gitignore[5]. + +core.editor:: + Commands such as `commit` and `tag` that lets you edit + messages by launching an editor uses the value of this + variable when it is set, and the environment variable + `GIT_EDITOR` is not set. See linkgit:git-var[1]. + +core.pager:: + The command that git will use to paginate output. Can + be overridden with the `GIT_PAGER` environment + variable. Note that git sets the `LESS` environment + variable to `FRSX` if it is unset when it runs the + pager. One can change these settings by setting the + `LESS` variable to some other value. Alternately, + these settings can be overridden on a project or + global basis by setting the `core.pager` option. + Setting `core.pager` has no affect on the `LESS` + environment variable behaviour above, so if you want + to override git's default settings this way, you need + to be explicit. For example, to disable the S option + in a backward compatible manner, set `core.pager` + to `less -+$LESS -FRX`. This will be passed to the + shell by git, which will translate the final command to + `LESS=FRSX less -+FRSX -FRX`. + +core.whitespace:: + A comma separated list of common whitespace problems to + notice. 'git-diff' will use `color.diff.whitespace` to + highlight them, and 'git-apply --whitespace=error' will + consider them as errors. You can prefix `-` to disable + any of them (e.g. `-trailing-space`): ++ +* `blank-at-eol` treats trailing whitespaces at the end of the line + as an error (enabled by default). +* `space-before-tab` treats a space character that appears immediately + before a tab character in the initial indent part of the line as an + error (enabled by default). +* `indent-with-non-tab` treats a line that is indented with 8 or more + space characters as an error (not enabled by default). +* `blank-at-eof` treats blank lines added at the end of file as an error + (enabled by default). +* `trailing-space` is a short-hand to cover both `blank-at-eol` and + `blank-at-eof`. +* `cr-at-eol` treats a carriage-return at the end of line as + part of the line terminator, i.e. with it, `trailing-space` + does not trigger if the character before such a carriage-return + is not a whitespace (not enabled by default). + +core.fsyncobjectfiles:: + This boolean will enable 'fsync()' when writing object files. ++ +This is a total waste of time and effort on a filesystem that orders +data writes properly, but can be useful for filesystems that do not use +journalling (traditional UNIX filesystems) or that only journal metadata +and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback"). + +core.preloadindex:: + Enable parallel index preload for operations like 'git diff' ++ +This can speed up operations like 'git diff' and 'git status' especially +on filesystems like NFS that have weak caching semantics and thus +relatively high IO latencies. With this set to 'true', git will do the +index comparison to the filesystem data in parallel, allowing +overlapping IO's. + +core.createObject:: + You can set this to 'link', in which case a hardlink followed by + a delete of the source are used to make sure that object creation + will not overwrite existing objects. ++ +On some file system/operating system combinations, this is unreliable. +Set this config setting to 'rename' there; However, This will remove the +check that makes sure that existing object files will not get overwritten. + +core.notesRef:: + When showing commit messages, also show notes which are stored in + the given ref. This ref is expected to contain files named + after the full SHA-1 of the commit they annotate. ++ +If such a file exists in the given ref, the referenced blob is read, and +appended to the commit message, separated by a "Notes:" line. If the +given ref itself does not exist, it is not an error, but means that no +notes should be printed. ++ +This setting defaults to "refs/notes/commits", and can be overridden by +the `GIT_NOTES_REF` environment variable. + +add.ignore-errors:: + Tells 'git-add' to continue adding files when some files cannot be + added due to indexing errors. Equivalent to the '--ignore-errors' + option of linkgit:git-add[1]. + +alias.*:: + Command aliases for the linkgit:git[1] command wrapper - e.g. + after defining "alias.last = cat-file commit HEAD", the invocation + "git last" is equivalent to "git cat-file commit HEAD". To avoid + confusion and troubles with script usage, aliases that + hide existing git commands are ignored. Arguments are split by + spaces, the usual shell quoting and escaping is supported. + quote pair and a backslash can be used to quote them. ++ +If the alias expansion is prefixed with an exclamation point, +it will be treated as a shell command. For example, defining +"alias.new = !gitk --all --not ORIG_HEAD", the invocation +"git new" is equivalent to running the shell command +"gitk --all --not ORIG_HEAD". Note that shell commands will be +executed from the top-level directory of a repository, which may +not necessarily be the current directory. + +apply.ignorewhitespace:: + When set to 'change', tells 'git-apply' to ignore changes in + whitespace, in the same way as the '--ignore-space-change' + option. + When set to one of: no, none, never, false tells 'git-apply' to + respect all whitespace differences. + See linkgit:git-apply[1]. + +apply.whitespace:: + Tells 'git-apply' how to handle whitespaces, in the same way + as the '--whitespace' option. See linkgit:git-apply[1]. + +branch.autosetupmerge:: + Tells 'git-branch' and 'git-checkout' to setup new branches + so that linkgit:git-pull[1] will appropriately merge from the + starting point branch. Note that even if this option is not set, + this behavior can be chosen per-branch using the `--track` + and `--no-track` options. The valid settings are: `false` -- no + automatic setup is done; `true` -- automatic setup is done when the + starting point is a remote branch; `always` -- automatic setup is + done when the starting point is either a local branch or remote + branch. This option defaults to true. + +branch.autosetuprebase:: + When a new branch is created with 'git-branch' or 'git-checkout' + that tracks another branch, this variable tells git to set + up pull to rebase instead of merge (see "branch.<name>.rebase"). + When `never`, rebase is never automatically set to true. + When `local`, rebase is set to true for tracked branches of + other local branches. + When `remote`, rebase is set to true for tracked branches of + remote branches. + When `always`, rebase will be set to true for all tracking + branches. + See "branch.autosetupmerge" for details on how to set up a + branch to track another branch. + This option defaults to never. + +branch.<name>.remote:: + When in branch <name>, it tells 'git-fetch' and 'git-push' which + remote to fetch from/push to. It defaults to `origin` if no remote is + configured. `origin` is also used if you are not on any branch. + +branch.<name>.merge:: + Defines, together with branch.<name>.remote, the upstream branch + for the given branch. It tells 'git-fetch'/'git-pull' which + branch to merge and can also affect 'git-push' (see push.default). + When in branch <name>, it tells 'git-fetch' the default + refspec to be marked for merging in FETCH_HEAD. The value is + handled like the remote part of a refspec, and must match a + ref which is fetched from the remote given by + "branch.<name>.remote". + The merge information is used by 'git-pull' (which at first calls + 'git-fetch') to lookup the default branch for merging. Without + this option, 'git-pull' defaults to merge the first refspec fetched. + Specify multiple values to get an octopus merge. + If you wish to setup 'git-pull' so that it merges into <name> from + another branch in the local repository, you can point + branch.<name>.merge to the desired branch, and use the special setting + `.` (a period) for branch.<name>.remote. + +branch.<name>.mergeoptions:: + Sets default options for merging into branch <name>. The syntax and + supported options are the same as those of linkgit:git-merge[1], but + option values containing whitespace characters are currently not + supported. + +branch.<name>.rebase:: + When true, rebase the branch <name> on top of the fetched branch, + instead of merging the default branch from the default remote when + "git pull" is run. + *NOTE*: this is a possibly dangerous operation; do *not* use + it unless you understand the implications (see linkgit:git-rebase[1] + for details). + +browser.<tool>.cmd:: + Specify the command to invoke the specified browser. The + specified command is evaluated in shell with the URLs passed + as arguments. (See linkgit:git-web--browse[1].) + +browser.<tool>.path:: + Override the path for the given tool that may be used to + browse HTML help (see '-w' option in linkgit:git-help[1]) or a + working repository in gitweb (see linkgit:git-instaweb[1]). + +clean.requireForce:: + A boolean to make git-clean do nothing unless given -f + or -n. Defaults to true. + +color.branch:: + A boolean to enable/disable color in the output of + linkgit:git-branch[1]. May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors are used + only when the output is to a terminal. Defaults to false. + +color.branch.<slot>:: + Use customized color for branch coloration. `<slot>` is one of + `current` (the current branch), `local` (a local branch), + `remote` (a tracking branch in refs/remotes/), `plain` (other + refs). ++ +The value for these configuration variables is a list of colors (at most +two) and attributes (at most one), separated by spaces. The colors +accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`, +`magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`, +`blink` and `reverse`. The first color given is the foreground; the +second is the background. The position of the attribute, if any, +doesn't matter. + +color.diff:: + When set to `always`, always use colors in patch. + When false (or `never`), never. When set to `true` or `auto`, use + colors only when the output is to the terminal. Defaults to false. + +color.diff.<slot>:: + Use customized color for diff colorization. `<slot>` specifies + which part of the patch to use the specified color, and is one + of `plain` (context text), `meta` (metainformation), `frag` + (hunk header), 'func' (function in hunk header), `old` (removed lines), + `new` (added lines), `commit` (commit headers), or `whitespace` + (highlighting whitespace errors). The values of these variables may be + specified as in color.branch.<slot>. + +color.grep:: + When set to `always`, always highlight matches. When `false` (or + `never`), never. When set to `true` or `auto`, use color only + when the output is written to the terminal. Defaults to `false`. + +color.grep.external:: + The string value of this variable is passed to an external 'grep' + command as a command line option if match highlighting is turned + on. If set to an empty string, no option is passed at all, + turning off coloring for external 'grep' calls; this is the default. + For GNU grep, set it to `--color=always` to highlight matches even + when a pager is used. + +color.grep.match:: + Use customized color for matches. The value of this variable + may be specified as in color.branch.<slot>. It is passed using + the environment variables 'GREP_COLOR' and 'GREP_COLORS' when + calling an external 'grep'. + +color.interactive:: + When set to `always`, always use colors for interactive prompts + and displays (such as those used by "git-add --interactive"). + When false (or `never`), never. When set to `true` or `auto`, use + colors only when the output is to the terminal. Defaults to false. + +color.interactive.<slot>:: + Use customized color for 'git-add --interactive' + output. `<slot>` may be `prompt`, `header`, `help` or `error`, for + four distinct types of normal output from interactive + commands. The values of these variables may be specified as + in color.branch.<slot>. + +color.pager:: + A boolean to enable/disable colored output when the pager is in + use (default is true). + +color.showbranch:: + A boolean to enable/disable color in the output of + linkgit:git-show-branch[1]. May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors are used + only when the output is to a terminal. Defaults to false. + +color.status:: + A boolean to enable/disable color in the output of + linkgit:git-status[1]. May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors are used + only when the output is to a terminal. Defaults to false. + +color.status.<slot>:: + Use customized color for status colorization. `<slot>` is + one of `header` (the header text of the status message), + `added` or `updated` (files which are added but not committed), + `changed` (files which are changed but not added in the index), + `untracked` (files which are not tracked by git), or + `nobranch` (the color the 'no branch' warning is shown in, defaulting + to red). The values of these variables may be specified as in + color.branch.<slot>. + +color.ui:: + When set to `always`, always use colors in all git commands which + are capable of colored output. When false (or `never`), never. When + set to `true` or `auto`, use colors only when the output is to the + terminal. When more specific variables of color.* are set, they always + take precedence over this setting. Defaults to false. + +commit.template:: + Specify a file to use as the template for new commit messages. + "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + specified user's home directory. + +diff.autorefreshindex:: + When using 'git-diff' to compare with work tree + files, do not consider stat-only change as changed. + Instead, silently run `git update-index --refresh` to + update the cached stat information for paths whose + contents in the work tree match the contents in the + index. This option defaults to true. Note that this + affects only 'git-diff' Porcelain, and not lower level + 'diff' commands, such as 'git-diff-files'. + +diff.external:: + If this config variable is set, diff generation is not + performed using the internal diff machinery, but using the + given command. Can be overridden with the `GIT_EXTERNAL_DIFF' + environment variable. The command is called with parameters + as described under "git Diffs" in linkgit:git[1]. Note: if + you want to use an external diff program only on a subset of + your files, you might want to use linkgit:gitattributes[5] instead. + +diff.mnemonicprefix:: + If set, 'git-diff' uses a prefix pair that is different from the + standard "a/" and "b/" depending on what is being compared. When + this configuration is in effect, reverse diff output also swaps + the order of the prefixes: +'git-diff';; + compares the (i)ndex and the (w)ork tree; +'git-diff HEAD';; + compares a (c)ommit and the (w)ork tree; +'git diff --cached';; + compares a (c)ommit and the (i)ndex; +'git-diff HEAD:file1 file2';; + compares an (o)bject and a (w)ork tree entity; +'git diff --no-index a b';; + compares two non-git things (1) and (2). + +diff.renameLimit:: + The number of files to consider when performing the copy/rename + detection; equivalent to the 'git-diff' option '-l'. + +diff.renames:: + Tells git to detect renames. If set to any boolean value, it + will enable basic rename detection. If set to "copies" or + "copy", it will detect copies, as well. + +diff.suppressBlankEmpty:: + A boolean to inhibit the standard behavior of printing a space + before each empty output line. Defaults to false. + +diff.tool:: + Controls which diff tool is used. `diff.tool` overrides + `merge.tool` when used by linkgit:git-difftool[1] and has + the same valid values as `merge.tool` minus "tortoisemerge" + and plus "kompare". + +difftool.<tool>.path:: + Override the path for the given tool. This is useful in case + your tool is not in the PATH. + +difftool.<tool>.cmd:: + Specify the command to invoke the specified diff tool. + The specified command is evaluated in shell with the following + variables available: 'LOCAL' is set to the name of the temporary + file containing the contents of the diff pre-image and 'REMOTE' + is set to the name of the temporary file containing the contents + of the diff post-image. + +difftool.prompt:: + Prompt before each invocation of the diff tool. + +diff.wordRegex:: + A POSIX Extended Regular Expression used to determine what is a "word" + when performing word-by-word difference calculations. Character + sequences that match the regular expression are "words", all other + characters are *ignorable* whitespace. + +fetch.unpackLimit:: + If the number of objects fetched over the git native + transfer is below this + limit, then the objects will be unpacked into loose object + files. However if the number of received objects equals or + exceeds this limit then the received pack will be stored as + a pack, after adding any missing delta bases. Storing the + pack from a push can make the push operation complete faster, + especially on slow filesystems. If not set, the value of + `transfer.unpackLimit` is used instead. + +format.attach:: + Enable multipart/mixed attachments as the default for + 'format-patch'. The value can also be a double quoted string + which will enable attachments as the default and set the + value as the boundary. See the --attach option in + linkgit:git-format-patch[1]. + +format.numbered:: + A boolean which can enable or disable sequence numbers in patch + subjects. It defaults to "auto" which enables it only if there + is more than one patch. It can be enabled or disabled for all + messages by setting it to "true" or "false". See --numbered + option in linkgit:git-format-patch[1]. + +format.headers:: + Additional email headers to include in a patch to be submitted + by mail. See linkgit:git-format-patch[1]. + +format.cc:: + Additional "Cc:" headers to include in a patch to be submitted + by mail. See the --cc option in linkgit:git-format-patch[1]. + +format.subjectprefix:: + The default for format-patch is to output files with the '[PATCH]' + subject prefix. Use this variable to change that prefix. + +format.suffix:: + The default for format-patch is to output files with the suffix + `.patch`. Use this variable to change that suffix (make sure to + include the dot if you want it). + +format.pretty:: + The default pretty format for log/show/whatchanged command, + See linkgit:git-log[1], linkgit:git-show[1], + linkgit:git-whatchanged[1]. + +format.thread:: + The default threading style for 'git-format-patch'. Can be + either a boolean value, `shallow` or `deep`. `shallow` + threading makes every mail a reply to the head of the series, + where the head is chosen from the cover letter, the + `\--in-reply-to`, and the first patch mail, in this order. + `deep` threading makes every mail a reply to the previous one. + A true boolean value is the same as `shallow`, and a false + value disables threading. + +format.signoff:: + A boolean value which lets you enable the `-s/--signoff` option of + format-patch by default. *Note:* Adding the Signed-off-by: line to a + patch should be a conscious act and means that you certify you have + the rights to submit this work under the same open source license. + Please see the 'SubmittingPatches' document for further discussion. + +gc.aggressiveWindow:: + The window size parameter used in the delta compression + algorithm used by 'git-gc --aggressive'. This defaults + to 10. + +gc.auto:: + When there are approximately more than this many loose + objects in the repository, `git gc --auto` will pack them. + Some Porcelain commands use this command to perform a + light-weight garbage collection from time to time. The + default value is 6700. Setting this to 0 disables it. + +gc.autopacklimit:: + When there are more than this many packs that are not + marked with `*.keep` file in the repository, `git gc + --auto` consolidates them into one larger pack. The + default value is 50. Setting this to 0 disables it. + +gc.packrefs:: + 'git-gc' does not run `git pack-refs` in a bare repository by + default so that older dumb-transport clients can still fetch + from the repository. Setting this to `true` lets 'git-gc' + to run `git pack-refs`. Setting this to `false` tells + 'git-gc' never to run `git pack-refs`. The default setting is + `notbare`. Enable it only when you know you do not have to + support such clients. The default setting will change to `true` + at some stage, and setting this to `false` will continue to + prevent `git pack-refs` from being run from 'git-gc'. + +gc.pruneexpire:: + When 'git-gc' is run, it will call 'prune --expire 2.weeks.ago'. + Override the grace period with this config variable. The value + "now" may be used to disable this grace period and always prune + unreachable objects immediately. + +gc.reflogexpire:: + 'git-reflog expire' removes reflog entries older than + this time; defaults to 90 days. + +gc.reflogexpireunreachable:: + 'git-reflog expire' removes reflog entries older than + this time and are not reachable from the current tip; + defaults to 30 days. + +gc.rerereresolved:: + Records of conflicted merge you resolved earlier are + kept for this many days when 'git-rerere gc' is run. + The default is 60 days. See linkgit:git-rerere[1]. + +gc.rerereunresolved:: + Records of conflicted merge you have not resolved are + kept for this many days when 'git-rerere gc' is run. + The default is 15 days. See linkgit:git-rerere[1]. + +gitcvs.commitmsgannotation:: + Append this string to each commit message. Set to empty string + to disable this feature. Defaults to "via git-CVS emulator". + +gitcvs.enabled:: + Whether the CVS server interface is enabled for this repository. + See linkgit:git-cvsserver[1]. + +gitcvs.logfile:: + Path to a log file where the CVS server interface well... logs + various stuff. See linkgit:git-cvsserver[1]. + +gitcvs.usecrlfattr:: + If true, the server will look up the `crlf` attribute for + files to determine the '-k' modes to use. If `crlf` is set, + the '-k' mode will be left blank, so cvs clients will + treat it as text. If `crlf` is explicitly unset, the file + will be set with '-kb' mode, which suppresses any newline munging + the client might otherwise do. If `crlf` is not specified, + then 'gitcvs.allbinary' is used. See linkgit:gitattributes[5]. + +gitcvs.allbinary:: + This is used if 'gitcvs.usecrlfattr' does not resolve + the correct '-kb' mode to use. If true, all + unresolved files are sent to the client in + mode '-kb'. This causes the client to treat them + as binary files, which suppresses any newline munging it + otherwise might do. Alternatively, if it is set to "guess", + then the contents of the file are examined to decide if + it is binary, similar to 'core.autocrlf'. + +gitcvs.dbname:: + Database used by git-cvsserver to cache revision information + derived from the git repository. The exact meaning depends on the + used database driver, for SQLite (which is the default driver) this + is a filename. Supports variable substitution (see + linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`). + Default: '%Ggitcvs.%m.sqlite' + +gitcvs.dbdriver:: + Used Perl DBI driver. You can specify any available driver + for this here, but it might not work. git-cvsserver is tested + with 'DBD::SQLite', reported to work with 'DBD::Pg', and + reported *not* to work with 'DBD::mysql'. Experimental feature. + May not contain double colons (`:`). Default: 'SQLite'. + See linkgit:git-cvsserver[1]. + +gitcvs.dbuser, gitcvs.dbpass:: + Database user and password. Only useful if setting 'gitcvs.dbdriver', + since SQLite has no concept of database users and/or passwords. + 'gitcvs.dbuser' supports variable substitution (see + linkgit:git-cvsserver[1] for details). + +gitcvs.dbTableNamePrefix:: + Database table name prefix. Prepended to the names of any + database tables used, allowing a single database to be used + for several repositories. Supports variable substitution (see + linkgit:git-cvsserver[1] for details). Any non-alphabetic + characters will be replaced with underscores. + +All gitcvs variables except for 'gitcvs.usecrlfattr' and +'gitcvs.allbinary' can also be specified as +'gitcvs.<access_method>.<varname>' (where 'access_method' +is one of "ext" and "pserver") to make them apply only for the given +access method. + +gui.commitmsgwidth:: + Defines how wide the commit message window is in the + linkgit:git-gui[1]. "75" is the default. + +gui.diffcontext:: + Specifies how many context lines should be used in calls to diff + made by the linkgit:git-gui[1]. The default is "5". + +gui.encoding:: + Specifies the default encoding to use for displaying of + file contents in linkgit:git-gui[1] and linkgit:gitk[1]. + It can be overridden by setting the 'encoding' attribute + for relevant files (see linkgit:gitattributes[5]). + If this option is not set, the tools default to the + locale encoding. + +gui.matchtrackingbranch:: + Determines if new branches created with linkgit:git-gui[1] should + default to tracking remote branches with matching names or + not. Default: "false". + +gui.newbranchtemplate:: + Is used as suggested name when creating new branches using the + linkgit:git-gui[1]. + +gui.pruneduringfetch:: + "true" if linkgit:git-gui[1] should prune tracking branches when + performing a fetch. The default value is "false". + +gui.trustmtime:: + Determines if linkgit:git-gui[1] should trust the file modification + timestamp or not. By default the timestamps are not trusted. + +gui.spellingdictionary:: + Specifies the dictionary used for spell checking commit messages in + the linkgit:git-gui[1]. When set to "none" spell checking is turned + off. + +gui.fastcopyblame:: + If true, 'git gui blame' uses '-C' instead of '-C -C' for original + location detection. It makes blame significantly faster on huge + repositories at the expense of less thorough copy detection. + +gui.copyblamethreshold:: + Specifies the threshold to use in 'git gui blame' original location + detection, measured in alphanumeric characters. See the + linkgit:git-blame[1] manual for more information on copy detection. + +gui.blamehistoryctx:: + Specifies the radius of history context in days to show in + linkgit:gitk[1] for the selected commit, when the `Show History + Context` menu item is invoked from 'git gui blame'. If this + variable is set to zero, the whole history is shown. + +guitool.<name>.cmd:: + Specifies the shell command line to execute when the corresponding item + of the linkgit:git-gui[1] `Tools` menu is invoked. This option is + mandatory for every tool. The command is executed from the root of + the working directory, and in the environment it receives the name of + the tool as 'GIT_GUITOOL', the name of the currently selected file as + 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if + the head is detached, 'CUR_BRANCH' is empty). + +guitool.<name>.needsfile:: + Run the tool only if a diff is selected in the GUI. It guarantees + that 'FILENAME' is not empty. + +guitool.<name>.noconsole:: + Run the command silently, without creating a window to display its + output. + +guitool.<name>.norescan:: + Don't rescan the working directory for changes after the tool + finishes execution. + +guitool.<name>.confirm:: + Show a confirmation dialog before actually running the tool. + +guitool.<name>.argprompt:: + Request a string argument from the user, and pass it to the tool + through the 'ARGS' environment variable. Since requesting an + argument implies confirmation, the 'confirm' option has no effect + if this is enabled. If the option is set to 'true', 'yes', or '1', + the dialog uses a built-in generic prompt; otherwise the exact + value of the variable is used. + +guitool.<name>.revprompt:: + Request a single valid revision from the user, and set the + 'REVISION' environment variable. In other aspects this option + is similar to 'argprompt', and can be used together with it. + +guitool.<name>.revunmerged:: + Show only unmerged branches in the 'revprompt' subdialog. + This is useful for tools similar to merge or rebase, but not + for things like checkout or reset. + +guitool.<name>.title:: + Specifies the title to use for the prompt dialog. The default + is the tool name. + +guitool.<name>.prompt:: + Specifies the general prompt string to display at the top of + the dialog, before subsections for 'argprompt' and 'revprompt'. + The default value includes the actual command. + +help.browser:: + Specify the browser that will be used to display help in the + 'web' format. See linkgit:git-help[1]. + +help.format:: + Override the default help format used by linkgit:git-help[1]. + Values 'man', 'info', 'web' and 'html' are supported. 'man' is + the default. 'web' and 'html' are the same. + +help.autocorrect:: + Automatically correct and execute mistyped commands after + waiting for the given number of deciseconds (0.1 sec). If more + than one command can be deduced from the entered text, nothing + will be executed. If the value of this option is negative, + the corrected command will be executed immediately. If the + value is 0 - the command will be just shown but not executed. + This is the default. + +http.proxy:: + Override the HTTP proxy, normally configured using the 'http_proxy' + environment variable (see linkgit:curl[1]). This can be overridden + on a per-remote basis; see remote.<name>.proxy + +http.sslVerify:: + Whether to verify the SSL certificate when fetching or pushing + over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment + variable. + +http.sslCert:: + File containing the SSL certificate when fetching or pushing + over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment + variable. + +http.sslKey:: + File containing the SSL private key when fetching or pushing + over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment + variable. + +http.sslCertPasswordProtected:: + Enable git's password prompt for the SSL certificate. Otherwise + OpenSSL will prompt the user, possibly many times, if the + certificate or private key is encrypted. Can be overridden by the + 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable. + +http.sslCAInfo:: + File containing the certificates to verify the peer with when + fetching or pushing over HTTPS. Can be overridden by the + 'GIT_SSL_CAINFO' environment variable. + +http.sslCAPath:: + Path containing files with the CA certificates to verify the peer + with when fetching or pushing over HTTPS. Can be overridden + by the 'GIT_SSL_CAPATH' environment variable. + +http.maxRequests:: + How many HTTP requests to launch in parallel. Can be overridden + by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. + +http.postBuffer:: + Maximum size in bytes of the buffer used by smart HTTP + transports when POSTing data to the remote system. + For requests larger than this buffer size, HTTP/1.1 and + Transfer-Encoding: chunked is used to avoid creating a + massive pack file locally. Default is 1 MiB, which is + sufficient for most requests. + +http.lowSpeedLimit, http.lowSpeedTime:: + If the HTTP transfer speed is less than 'http.lowSpeedLimit' + for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. + Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and + 'GIT_HTTP_LOW_SPEED_TIME' environment variables. + +http.noEPSV:: + A boolean which disables using of EPSV ftp command by curl. + This can helpful with some "poor" ftp servers which don't + support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' + environment variable. Default is false (curl will use EPSV). + +i18n.commitEncoding:: + Character encoding the commit messages are stored in; git itself + does not care per se, but this information is necessary e.g. when + importing commits from emails or in the gitk graphical history + browser (and possibly at other places in the future or in other + porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'. + +i18n.logOutputEncoding:: + Character encoding the commit messages are converted to when + running 'git-log' and friends. + +imap:: + The configuration variables in the 'imap' section are described + in linkgit:git-imap-send[1]. + +instaweb.browser:: + Specify the program that will be used to browse your working + repository in gitweb. See linkgit:git-instaweb[1]. + +instaweb.httpd:: + The HTTP daemon command-line to start gitweb on your working + repository. See linkgit:git-instaweb[1]. + +instaweb.local:: + If true the web server started by linkgit:git-instaweb[1] will + be bound to the local IP (127.0.0.1). + +instaweb.modulepath:: + The module path for an apache httpd used by linkgit:git-instaweb[1]. + +instaweb.port:: + The port number to bind the gitweb httpd to. See + linkgit:git-instaweb[1]. + +interactive.singlekey:: + In interactive commands, allow the user to provide one-letter + input with a single key (i.e., without hitting enter). + Currently this is used only by the `\--patch` mode of + linkgit:git-add[1]. Note that this setting is silently + ignored if portable keystroke input is not available. + +log.date:: + Set default date-time mode for the log command. Setting log.date + value is similar to using 'git-log'\'s --date option. The value is one of the + following alternatives: {relative,local,default,iso,rfc,short}. + See linkgit:git-log[1]. + +log.showroot:: + If true, the initial commit will be shown as a big creation event. + This is equivalent to a diff against an empty tree. + Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which + normally hide the root commit will now show it. True by default. + +mailmap.file:: + The location of an augmenting mailmap file. The default + mailmap, located in the root of the repository, is loaded + first, then the mailmap file pointed to by this variable. + The location of the mailmap file may be in a repository + subdirectory, or somewhere outside of the repository itself. + See linkgit:git-shortlog[1] and linkgit:git-blame[1]. + +man.viewer:: + Specify the programs that may be used to display help in the + 'man' format. See linkgit:git-help[1]. + +man.<tool>.cmd:: + Specify the command to invoke the specified man viewer. The + specified command is evaluated in shell with the man page + passed as argument. (See linkgit:git-help[1].) + +man.<tool>.path:: + Override the path for the given tool that may be used to + display help in the 'man' format. See linkgit:git-help[1]. + +include::merge-config.txt[] + +mergetool.<tool>.path:: + Override the path for the given tool. This is useful in case + your tool is not in the PATH. + +mergetool.<tool>.cmd:: + Specify the command to invoke the specified merge tool. The + specified command is evaluated in shell with the following + variables available: 'BASE' is the name of a temporary file + containing the common base of the files to be merged, if available; + 'LOCAL' is the name of a temporary file containing the contents of + the file on the current branch; 'REMOTE' is the name of a temporary + file containing the contents of the file from the branch being + merged; 'MERGED' contains the name of the file to which the merge + tool should write the results of a successful merge. + +mergetool.<tool>.trustExitCode:: + For a custom merge command, specify whether the exit code of + the merge command can be used to determine whether the merge was + successful. If this is not set to true then the merge target file + timestamp is checked and the merge assumed to have been successful + if the file has been updated, otherwise the user is prompted to + indicate the success of the merge. + +mergetool.keepBackup:: + After performing a merge, the original file with conflict markers + can be saved as a file with a `.orig` extension. If this variable + is set to `false` then this file is not preserved. Defaults to + `true` (i.e. keep the backup files). + +mergetool.keepTemporaries:: + When invoking a custom merge tool, git uses a set of temporary + files to pass to the tool. If the tool returns an error and this + variable is set to `true`, then these temporary files will be + preserved, otherwise they will be removed after the tool has + exited. Defaults to `false`. + +mergetool.prompt:: + Prompt before each invocation of the merge resolution program. + +pack.window:: + The size of the window used by linkgit:git-pack-objects[1] when no + window size is given on the command line. Defaults to 10. + +pack.depth:: + The maximum delta depth used by linkgit:git-pack-objects[1] when no + maximum depth is given on the command line. Defaults to 50. + +pack.windowMemory:: + The window memory size limit used by linkgit:git-pack-objects[1] + when no limit is given on the command line. The value can be + suffixed with "k", "m", or "g". Defaults to 0, meaning no + limit. + +pack.compression:: + An integer -1..9, indicating the compression level for objects + in a pack file. -1 is the zlib default. 0 means no + compression, and 1..9 are various speed/size tradeoffs, 9 being + slowest. If not set, defaults to core.compression. If that is + not set, defaults to -1, the zlib default, which is "a default + compromise between speed and compression (currently equivalent + to level 6)." + +pack.deltaCacheSize:: + The maximum memory in bytes used for caching deltas in + linkgit:git-pack-objects[1] before writing them out to a pack. + This cache is used to speed up the writing object phase by not + having to recompute the final delta result once the best match + for all objects is found. Repacking large repositories on machines + which are tight with memory might be badly impacted by this though, + especially if this cache pushes the system into swapping. + A value of 0 means no limit. The smallest size of 1 byte may be + used to virtually disable this cache. Defaults to 256 MiB. + +pack.deltaCacheLimit:: + The maximum size of a delta, that is cached in + linkgit:git-pack-objects[1]. This cache is used to speed up the + writing object phase by not having to recompute the final delta + result once the best match for all objects is found. Defaults to 1000. + +pack.threads:: + Specifies the number of threads to spawn when searching for best + delta matches. This requires that linkgit:git-pack-objects[1] + be compiled with pthreads otherwise this option is ignored with a + warning. This is meant to reduce packing time on multiprocessor + machines. The required amount of memory for the delta search window + is however multiplied by the number of threads. + Specifying 0 will cause git to auto-detect the number of CPU's + and set the number of threads accordingly. + +pack.indexVersion:: + Specify the default pack index version. Valid values are 1 for + legacy pack index used by Git versions prior to 1.5.2, and 2 for + the new pack index with capabilities for packs larger than 4 GB + as well as proper protection against the repacking of corrupted + packs. Version 2 is the default. Note that version 2 is enforced + and this config option ignored whenever the corresponding pack is + larger than 2 GB. ++ +If you have an old git that does not understand the version 2 `{asterisk}.idx` file, +cloning or fetching over a non native protocol (e.g. "http" and "rsync") +that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the +other side may give you a repository that cannot be accessed with your +older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however, +you can use linkgit:git-index-pack[1] on the *.pack file to regenerate +the `{asterisk}.idx` file. + +pack.packSizeLimit:: + The default maximum size of a pack. This setting only affects + packing to a file, i.e. the git:// protocol is unaffected. It + can be overridden by the `\--max-pack-size` option of + linkgit:git-repack[1]. + +pager.<cmd>:: + Allows turning on or off pagination of the output of a + particular git subcommand when writing to a tty. If + `\--paginate` or `\--no-pager` is specified on the command line, + it takes precedence over this option. To disable pagination for + all commands, set `core.pager` or `GIT_PAGER` to `cat`. + +pull.octopus:: + The default merge strategy to use when pulling multiple branches + at once. + +pull.twohead:: + The default merge strategy to use when pulling a single branch. + +push.default:: + Defines the action git push should take if no refspec is given + on the command line, no refspec is configured in the remote, and + no refspec is implied by any of the options given on the command + line. Possible values are: ++ +* `nothing` do not push anything. +* `matching` push all matching branches. + All branches having the same name in both ends are considered to be + matching. This is the default. +* `tracking` push the current branch to its upstream branch. +* `current` push the current branch to a branch of the same name. + +rebase.stat:: + Whether to show a diffstat of what changed upstream since the last + rebase. False by default. + +receive.autogc:: + By default, git-receive-pack will run "git-gc --auto" after + receiving data from git-push and updating refs. You can stop + it by setting this variable to false. + +receive.fsckObjects:: + If it is set to true, git-receive-pack will check all received + objects. It will abort in the case of a malformed object or a + broken link. The result of an abort are only dangling objects. + Defaults to false. + +receive.unpackLimit:: + If the number of objects received in a push is below this + limit then the objects will be unpacked into loose object + files. However if the number of received objects equals or + exceeds this limit then the received pack will be stored as + a pack, after adding any missing delta bases. Storing the + pack from a push can make the push operation complete faster, + especially on slow filesystems. If not set, the value of + `transfer.unpackLimit` is used instead. + +receive.denyDeletes:: + If set to true, git-receive-pack will deny a ref update that deletes + the ref. Use this to prevent such a ref deletion via a push. + +receive.denyCurrentBranch:: + If set to true or "refuse", receive-pack will deny a ref update + to the currently checked out branch of a non-bare repository. + Such a push is potentially dangerous because it brings the HEAD + out of sync with the index and working tree. If set to "warn", + print a warning of such a push to stderr, but allow the push to + proceed. If set to false or "ignore", allow such pushes with no + message. Defaults to "warn". + +receive.denyNonFastForwards:: + If set to true, git-receive-pack will deny a ref update which is + not a fast-forward. Use this to prevent such an update via a push, + even if that push is forced. This configuration variable is + set when initializing a shared repository. + +receive.updateserverinfo:: + If set to true, git-receive-pack will run git-update-server-info + after receiving data from git-push and updating refs. + +remote.<name>.url:: + The URL of a remote repository. See linkgit:git-fetch[1] or + linkgit:git-push[1]. + +remote.<name>.pushurl:: + The push URL of a remote repository. See linkgit:git-push[1]. + +remote.<name>.proxy:: + For remotes that require curl (http, https and ftp), the URL to + the proxy to use for that remote. Set to the empty string to + disable proxying for that remote. + +remote.<name>.fetch:: + The default set of "refspec" for linkgit:git-fetch[1]. See + linkgit:git-fetch[1]. + +remote.<name>.push:: + The default set of "refspec" for linkgit:git-push[1]. See + linkgit:git-push[1]. + +remote.<name>.mirror:: + If true, pushing to this remote will automatically behave + as if the `\--mirror` option was given on the command line. + +remote.<name>.skipDefaultUpdate:: + If true, this remote will be skipped by default when updating + using linkgit:git-fetch[1] or the `update` subcommand of + linkgit:git-remote[1]. + +remote.<name>.skipFetchAll:: + If true, this remote will be skipped by default when updating + using linkgit:git-fetch[1] or the `update` subcommand of + linkgit:git-remote[1]. + +remote.<name>.receivepack:: + The default program to execute on the remote side when pushing. See + option \--receive-pack of linkgit:git-push[1]. + +remote.<name>.uploadpack:: + The default program to execute on the remote side when fetching. See + option \--upload-pack of linkgit:git-fetch-pack[1]. + +remote.<name>.tagopt:: + Setting this value to \--no-tags disables automatic tag following when + fetching from remote <name> + +remotes.<group>:: + The list of remotes which are fetched by "git remote update + <group>". See linkgit:git-remote[1]. + +repack.usedeltabaseoffset:: + By default, linkgit:git-repack[1] creates packs that use + delta-base offset. If you need to share your repository with + git older than version 1.4.4, either directly or via a dumb + protocol such as http, then you need to set this option to + "false" and repack. Access from old git versions over the + native protocol are unaffected by this option. + +rerere.autoupdate:: + When set to true, `git-rerere` updates the index with the + resulting contents after it cleanly resolves conflicts using + previously recorded resolution. Defaults to false. + +rerere.enabled:: + Activate recording of resolved conflicts, so that identical + conflict hunks can be resolved automatically, should they + be encountered again. linkgit:git-rerere[1] command is by + default enabled if you create `rr-cache` directory under + `$GIT_DIR`, but can be disabled by setting this option to false. + +sendemail.identity:: + A configuration identity. When given, causes values in the + 'sendemail.<identity>' subsection to take precedence over + values in the 'sendemail' section. The default identity is + the value of 'sendemail.identity'. + +sendemail.smtpencryption:: + See linkgit:git-send-email[1] for description. Note that this + setting is not subject to the 'identity' mechanism. + +sendemail.smtpssl:: + Deprecated alias for 'sendemail.smtpencryption = ssl'. + +sendemail.<identity>.*:: + Identity-specific versions of the 'sendemail.*' parameters + found below, taking precedence over those when the this + identity is selected, through command-line or + 'sendemail.identity'. + +sendemail.aliasesfile:: +sendemail.aliasfiletype:: +sendemail.bcc:: +sendemail.cc:: +sendemail.cccmd:: +sendemail.chainreplyto:: +sendemail.confirm:: +sendemail.envelopesender:: +sendemail.from:: +sendemail.multiedit:: +sendemail.signedoffbycc:: +sendemail.smtppass:: +sendemail.suppresscc:: +sendemail.suppressfrom:: +sendemail.to:: +sendemail.smtpserver:: +sendemail.smtpserverport:: +sendemail.smtpuser:: +sendemail.thread:: +sendemail.validate:: + See linkgit:git-send-email[1] for description. + +sendemail.signedoffcc:: + Deprecated alias for 'sendemail.signedoffbycc'. + +showbranch.default:: + The default set of branches for linkgit:git-show-branch[1]. + See linkgit:git-show-branch[1]. + +status.relativePaths:: + By default, linkgit:git-status[1] shows paths relative to the + current directory. Setting this variable to `false` shows paths + relative to the repository root (this was the default for git + prior to v1.5.4). + +status.showUntrackedFiles:: + By default, linkgit:git-status[1] and linkgit:git-commit[1] show + files which are not currently tracked by Git. Directories which + contain only untracked files, are shown with the directory name + only. Showing untracked files means that Git needs to lstat() all + all the files in the whole repository, which might be slow on some + systems. So, this variable controls how the commands displays + the untracked files. Possible values are: ++ +-- + - 'no' - Show no untracked files + - 'normal' - Shows untracked files and directories + - 'all' - Shows also individual files in untracked directories. +-- ++ +If this variable is not specified, it defaults to 'normal'. +This variable can be overridden with the -u|--untracked-files option +of linkgit:git-status[1] and linkgit:git-commit[1]. + +tar.umask:: + This variable can be used to restrict the permission bits of + tar archive entries. The default is 0002, which turns off the + world write bit. The special value "user" indicates that the + archiving user's umask will be used instead. See umask(2) and + linkgit:git-archive[1]. + +transfer.unpackLimit:: + When `fetch.unpackLimit` or `receive.unpackLimit` are + not set, the value of this variable is used instead. + The default value is 100. + +url.<base>.insteadOf:: + Any URL that starts with this value will be rewritten to + start, instead, with <base>. In cases where some site serves a + large number of repositories, and serves them with multiple + access methods, and some users need to use different access + methods, this feature allows people to specify any of the + equivalent URLs and have git automatically rewrite the URL to + the best alternative for the particular user, even for a + never-before-seen repository on the site. When more than one + insteadOf strings match a given URL, the longest match is used. + +url.<base>.pushInsteadOf:: + Any URL that starts with this value will not be pushed to; + instead, it will be rewritten to start with <base>, and the + resulting URL will be pushed to. In cases where some site serves + a large number of repositories, and serves them with multiple + access methods, some of which do not allow push, this feature + allows people to specify a pull-only URL and have git + automatically use an appropriate URL to push, even for a + never-before-seen repository on the site. When more than one + pushInsteadOf strings match a given URL, the longest match is + used. If a remote has an explicit pushurl, git will ignore this + setting for that remote. + +user.email:: + Your email address to be recorded in any newly created commits. + Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and + 'EMAIL' environment variables. See linkgit:git-commit-tree[1]. + +user.name:: + Your full name to be recorded in any newly created commits. + Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME' + environment variables. See linkgit:git-commit-tree[1]. + +user.signingkey:: + If linkgit:git-tag[1] is not selecting the key you want it to + automatically when creating a signed tag, you can override the + default selection with this variable. This option is passed + unchanged to gpg's --local-user parameter, so you may specify a key + using any method that gpg supports. + +web.browser:: + Specify a web browser that may be used by some commands. + Currently only linkgit:git-instaweb[1] and linkgit:git-help[1] + may use it. |