diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 124 |
1 files changed, 99 insertions, 25 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index c081657be7..915cb5a547 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -95,7 +95,9 @@ included file is expanded immediately, as if its contents had been found at the location of the include directive. If the value of the `include.path` variable is a relative path, the path is considered to be relative to the configuration file in which the include directive was -found. See below for examples. +found. The value of `include.path` is subject to tilde expansion: `~/` +is expanded to the value of `$HOME`, and `~user/` to the specified +user's home directory. See below for examples. Example ~~~~~~~ @@ -122,6 +124,7 @@ Example [include] path = /path/to/foo.inc ; include by absolute path path = foo ; expand "foo" relative to the current file + path = ~/foo ; expand "foo" in your $HOME directory Variables ~~~~~~~~~ @@ -138,8 +141,23 @@ advice.*:: + -- pushNonFastForward:: - Advice shown when linkgit:git-push[1] refuses - non-fast-forward refs. + Set this variable to 'false' if you want to disable + 'pushNonFFCurrent', 'pushNonFFDefault', and + 'pushNonFFMatching' simultaneously. + pushNonFFCurrent:: + Advice shown when linkgit:git-push[1] fails due to a + non-fast-forward update to the current branch. + pushNonFFDefault:: + Advice to set 'push.default' to 'upstream' or 'current' + when you ran linkgit:git-push[1] and pushed 'matching + refs' by default (i.e. you did not provide an explicit + refspec, and no 'push.default' configuration was set) + and it resulted in a non-fast-forward error. + pushNonFFMatching:: + Advice shown when you ran linkgit:git-push[1] and pushed + 'matching refs' explicitly (i.e. you used ':', or + specified a refspec that isn't your current branch) and + it resulted in a non-fast-forward error. statusHints:: Directions on how to stage/unstage/add shown in the output of linkgit:git-status[1] and the template shown @@ -463,8 +481,8 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesfile:: In addition to '.gitignore' (per-directory) and '.git/info/exclude', git looks into this file for patterns - of files which are not meant to be tracked. "{tilde}/" is expanded - to the value of `$HOME` and "{tilde}user/" to the specified user's + of files which are not meant to be tracked. "`~/`" is expanded + to the value of `$HOME` and "`~user/`" to the specified user's home directory. See linkgit:gitignore[5]. core.askpass:: @@ -838,6 +856,44 @@ color.ui:: `never` if you prefer git commands not to use color unless enabled explicitly with some other configuration or the `--color` option. +column.ui:: + Specify whether supported commands should output in columns. + This variable consists of a list of tokens separated by spaces + or commas: ++ +-- +`always`;; + always show in columns +`never`;; + never show in columns +`auto`;; + show in columns if the output is to the terminal +`column`;; + fill columns before rows (default) +`row`;; + fill rows before columns +`plain`;; + show in one column +`dense`;; + make unequal size columns to utilize more space +`nodense`;; + make equal size columns +-- ++ + This option defaults to 'never'. + +column.branch:: + Specify whether to output branch listing in `git branch` in columns. + See `column.ui` for details. + +column.status:: + Specify whether to output untracked files in `git status` in columns. + See `column.ui` for details. + +column.tag:: + Specify whether to output tag listing in `git tag` in columns. + See `column.ui` for details. + commit.status:: A boolean to enable/disable inclusion of status information in the commit message template when using an editor to prepare the commit @@ -845,7 +901,7 @@ commit.status:: commit.template:: Specify a file to use as the template for new commit messages. - "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the specified user's home directory. credential.helper:: @@ -970,7 +1026,7 @@ format.thread:: a boolean value, or `shallow` or `deep`. `shallow` threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the - `\--in-reply-to`, and the first patch mail, in this order. + `--in-reply-to`, and the first patch mail, in this order. `deep` threading makes every mail a reply to the previous one. A true boolean value is the same as `shallow`, and a false value disables threading. @@ -1401,7 +1457,7 @@ instaweb.port:: interactive.singlekey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). - Currently this is used by the `\--patch` mode of + Currently this is used by the `--patch` mode of linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this setting is silently ignored if portable keystroke input @@ -1409,13 +1465,13 @@ interactive.singlekey:: log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may - override this option with `\--no-abbrev-commit`. + linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may + override this option with `--no-abbrev-commit`. log.date:: Set the default date-time mode for the 'log' command. Setting a value for log.date is similar to using 'git log''s - `\--date` option. Possible values are `relative`, `local`, + `--date` option. Possible values are `relative`, `local`, `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1] for details. @@ -1605,18 +1661,18 @@ pack.indexVersion:: and this config option ignored whenever the corresponding pack is larger than 2 GB. + -If you have an old git that does not understand the version 2 `{asterisk}.idx` file, +If you have an old git that does not understand the version 2 `*.idx` file, cloning or fetching over a non native protocol (e.g. "http" and "rsync") -that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the +that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your -older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however, +older version of git. If the `*.pack` file is smaller than 2 GB, however, you can use linkgit:git-index-pack[1] on the *.pack file to regenerate -the `{asterisk}.idx` file. +the `*.idx` file. pack.packSizeLimit:: The maximum size of a pack. This setting only affects packing to a file when repacking, i.e. the git:// protocol - is unaffected. It can be overridden by the `\--max-pack-size` + is unaffected. It can be overridden by the `--max-pack-size` option of linkgit:git-repack[1]. The minimum size allowed is limited to 1 MiB. The default is unlimited. Common unit suffixes of 'k', 'm', or 'g' are @@ -1626,8 +1682,8 @@ pager.<cmd>:: If the value is boolean, turns on or off pagination of the output of a particular git subcommand when writing to a tty. Otherwise, turns on pagination for the subcommand using the - pager specified by the value of `pager.<cmd>`. If `\--paginate` - or `\--no-pager` is specified on the command line, it takes + pager specified by the value of `pager.<cmd>`. If `--paginate` + or `--no-pager` is specified on the command line, it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. @@ -1635,9 +1691,9 @@ pretty.<name>:: Alias for a --pretty= format string, as specified in linkgit:git-log[1]. Any aliases defined here can be used just as the built-in pretty formats could. For example, - running `git config pretty.changelog "format:{asterisk} %H %s"` + running `git config pretty.changelog "format:* %H %s"` would cause the invocation `git log --pretty=changelog` - to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + to be equivalent to running `git log "--pretty=format:* %H %s"`. Note that an alias with the same name as a built-in format will be silently ignored. @@ -1665,12 +1721,30 @@ push.default:: line. Possible values are: + * `nothing` - do not push anything. -* `matching` - push all matching branches. - All branches having the same name in both ends are considered to be - matching. This is the default. +* `matching` - push all branches having the same name in both ends. + This is for those who prepare all the branches into a publishable + shape and then push them out with a single command. It is not + appropriate for pushing into a repository shared by multiple users, + since locally stalled branches will attempt a non-fast forward push + if other users updated the branch. + + + This is currently the default, but Git 2.0 will change the default + to `simple`. * `upstream` - push the current branch to its upstream branch. -* `tracking` - deprecated synonym for `upstream`. + With this, `git push` will update the same remote ref as the one which + is merged by `git pull`, making `push` and `pull` symmetrical. + See "branch.<name>.merge" for how to configure the upstream branch. +* `simple` - like `upstream`, but refuses to push if the upstream + branch's name is different from the local one. This is the safest + option and is well-suited for beginners. It will become the default + in Git 2.0. * `current` - push the current branch to a branch of the same name. + + + The `simple`, `current` and `upstream` modes are for those who want to + push out a single branch after finishing work, even when the other + branches are not yet ready to be pushed out. If you are working with + other people to push into the same shared repository, you would want + to use one of these. rebase.stat:: Whether to show a diffstat of what changed upstream since the last @@ -1750,7 +1824,7 @@ remote.<name>.push:: remote.<name>.mirror:: If true, pushing to this remote will automatically behave - as if the `\--mirror` option was given on the command line. + as if the `--mirror` option was given on the command line. remote.<name>.skipDefaultUpdate:: If true, this remote will be skipped by default when updating |