diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 534 |
1 files changed, 413 insertions, 121 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index 27b57d226b..b3023b8172 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -1,19 +1,20 @@ CONFIGURATION FILE ------------------ -The git configuration file contains a number of variables that affect -the git command's behavior. The `.git/config` file in each repository +The Git configuration file contains a number of variables that affect +the Git commands' behavior. The `.git/config` file in each repository is used to store the configuration for that repository, and `$HOME/.gitconfig` is used to store a per-user configuration as fallback values for the `.git/config` file. The file `/etc/gitconfig` can be used to store a system-wide default configuration. -The configuration variables are used by both the git plumbing +The configuration variables are used by both the Git plumbing and the porcelains. The variables are divided into sections, wherein the fully qualified variable name of the variable itself is the last dot-separated segment and the section name is everything before the last -dot. The variable names are case-insensitive and only alphanumeric -characters are allowed. Some variables may appear multiple times. +dot. The variable names are case-insensitive, allow only alphanumeric +characters and `-`, and must start with an alphabetic character. Some +variables may appear multiple times. Syntax ~~~~~~ @@ -45,17 +46,19 @@ lines. Variables may belong directly to a section or to a given subsection. You can have `[section]` if you have `[section "subsection"]`, but you don't need to. -There is also a case insensitive alternative `[section.subsection]` syntax. -In this syntax, subsection names follow the same restrictions as for section -names. +There is also a deprecated `[section.subsection]` syntax. With this +syntax, the subsection name is converted to lower-case and is also +compared case sensitively. These subsection names follow the same +restrictions as section names. All the other lines (and the remainder of the line after the section header) are recognized as setting variables, in the form 'name = value'. If there is no equal sign on the line, the entire line is taken as 'name' and the variable is recognized as boolean "true". -The variable names are case-insensitive and only alphanumeric -characters and `-` are allowed. There can be more than one value -for a given variable; we say then that variable is multivalued. +The variable names are case-insensitive, allow only alphanumeric characters +and `-`, and must start with an alphabetic character. There can be more +than one value for a given variable; we say then that the variable is +multivalued. Leading and trailing whitespace in a variable value is discarded. Internal whitespace within a variable value is retained verbatim. @@ -83,6 +86,19 @@ customary UNIX fashion. Some variables may require a special value format. +Includes +~~~~~~~~ + +You can include one config file from another by setting the special +`include.path` variable to the name of the file to be included. The +included file is expanded immediately, as if its contents had been +found at the location of the include directive. If the value of the +`include.path` variable is a relative path, the path is considered to be +relative to the configuration file in which the include directive was +found. The value of `include.path` is subject to tilde expansion: `~/` +is expanded to the value of `$HOME`, and `~user/` to the specified +user's home directory. See below for examples. + Example ~~~~~~~ @@ -105,6 +121,11 @@ Example gitProxy="ssh" for "kernel.org" gitProxy=default-proxy ; for the rest + [include] + path = /path/to/foo.inc ; include by absolute path + path = foo ; expand "foo" relative to the current file + path = ~/foo ; expand "foo" in your $HOME directory + Variables ~~~~~~~~~ @@ -114,40 +135,71 @@ in the appropriate manual page. You will find a description of non-core porcelain configuration variables in the respective porcelain documentation. advice.*:: - When set to 'true', display the given optional help message. - When set to 'false', do not display. The configuration variables - are: + These variables control various optional help messages designed to + aid new users. All 'advice.*' variables default to 'true', and you + can tell Git that you do not need help by setting these to 'false': + -- - pushNonFastForward:: - Advice shown when linkgit:git-push[1] refuses - non-fast-forward refs. Default: true. + pushUpdateRejected:: + Set this variable to 'false' if you want to disable + 'pushNonFFCurrent', 'pushNonFFDefault', + 'pushNonFFMatching', 'pushAlreadyExists', + 'pushFetchFirst', and 'pushNeedsForce' + simultaneously. + pushNonFFCurrent:: + Advice shown when linkgit:git-push[1] fails due to a + non-fast-forward update to the current branch. + pushNonFFDefault:: + Advice to set 'push.default' to 'upstream' or 'current' + when you ran linkgit:git-push[1] and pushed 'matching + refs' by default (i.e. you did not provide an explicit + refspec, and no 'push.default' configuration was set) + and it resulted in a non-fast-forward error. + pushNonFFMatching:: + Advice shown when you ran linkgit:git-push[1] and pushed + 'matching refs' explicitly (i.e. you used ':', or + specified a refspec that isn't your current branch) and + it resulted in a non-fast-forward error. + pushAlreadyExists:: + Shown when linkgit:git-push[1] rejects an update that + does not qualify for fast-forwarding (e.g., a tag.) + pushFetchFirst:: + Shown when linkgit:git-push[1] rejects an update that + tries to overwrite a remote ref that points at an + object we do not have. + pushNeedsForce:: + Shown when linkgit:git-push[1] rejects an update that + tries to overwrite a remote ref that points at an + object that is not a committish, or make the remote + ref point at an object that is not a committish. statusHints:: - Directions on how to stage/unstage/add shown in the - output of linkgit:git-status[1] and the template shown - when writing commit messages. Default: true. + Show directions on how to proceed from the current + state in the output of linkgit:git-status[1], in + the template shown when writing commit messages in + linkgit:git-commit[1], and in the help message shown + by linkgit:git-checkout[1] when switching branch. commitBeforeMerge:: Advice shown when linkgit:git-merge[1] refuses to merge to avoid overwriting local changes. - Default: true. resolveConflict:: - Advices shown by various commands when conflicts + Advice shown by various commands when conflicts prevent the operation from being performed. - Default: true. implicitIdentity:: Advice on how to set your identity configuration when your information is guessed from the system username and - domain name. Default: true. - + domain name. detachedHead:: - Advice shown when you used linkgit::git-checkout[1] to + Advice shown when you used linkgit:git-checkout[1] to move to the detach HEAD state, to instruct how to create - a local branch after the fact. Default: true. + a local branch after the fact. + amWorkDir:: + Advice that shows the location of the patch file when + linkgit:git-am[1] fails to apply it. -- core.fileMode:: If false, the executable bit differences between the index and - the working copy are ignored; useful on broken filesystems like FAT. + the working tree are ignored; useful on broken filesystems like FAT. See linkgit:git-update-index[1]. + The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] @@ -167,9 +219,9 @@ core.ignoreCygwinFSTricks:: core.ignorecase:: If true, this option enables various workarounds to enable - git to work better on filesystems that are not case sensitive, + Git to work better on filesystems that are not case sensitive, like FAT. For example, if a directory listing finds - "makefile" when git expects "Makefile", git will assume + "makefile" when Git expects "Makefile", Git will assume it is really the same file, and continue to remember it as "Makefile". + @@ -177,13 +229,28 @@ The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] will probe and set core.ignorecase true if appropriate when the repository is created. +core.precomposeunicode:: + This option is only used by Mac OS implementation of Git. + When core.precomposeunicode=true, Git reverts the unicode decomposition + of filenames done by Mac OS. This is useful when sharing a repository + between Mac OS and Linux or Windows. + (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7). + When false, file names are handled fully transparent by Git, + which is backward compatible with older versions of Git. + core.trustctime:: If false, the ctime differences between the index and the - working copy are ignored; useful when the inode change time + working tree are ignored; useful when the inode change time is regularly modified by something outside Git (file system crawlers and some backup systems). See linkgit:git-update-index[1]. True by default. +core.checkstat:: + Determines which stat fields to match between the index + and work tree. The user can set this to 'default' or + 'minimal'. Default (or explicitly 'default'), is to check + all fields, including the sub-second part of mtime and ctime. + core.quotepath:: The commands that output paths (e.g. 'ls-files', 'diff'), when not given the `-z` option, will quote @@ -205,20 +272,20 @@ core.eol:: conversion. core.safecrlf:: - If true, makes git check if converting `CRLF` is reversible when + If true, makes Git check if converting `CRLF` is reversible when end-of-line conversion is active. Git will verify if a command modifies a file in the work tree either directly or indirectly. For example, committing a file followed by checking out the same file should yield the original file in the work tree. If this is not the case for the current setting of - `core.autocrlf`, git will reject the file. The variable can - be set to "warn", in which case git will only warn about an + `core.autocrlf`, Git will reject the file. The variable can + be set to "warn", in which case Git will only warn about an irreversible conversion but continue the operation. + CRLF conversion bears a slight chance of corrupting data. -When it is enabled, git will convert CRLF to LF during commit and LF to +When it is enabled, Git will convert CRLF to LF during commit and LF to CRLF during checkout. A file that contains a mixture of LF and -CRLF before the commit cannot be recreated by git. For text +CRLF before the commit cannot be recreated by Git. For text files this is the right thing to do: it corrects line endings such that we have only LF line endings in the repository. But for binary files that are accidentally classified as text the @@ -228,7 +295,7 @@ If you recognize such corruption early you can easily fix it by setting the conversion type explicitly in .gitattributes. Right after committing you still have the original file in your work tree and this file is not yet corrupted. You can explicitly tell -git that this file is binary and git will handle the file +Git that this file is binary and Git will handle the file appropriately. + Unfortunately, the desired effect of cleaning up text files with @@ -273,7 +340,7 @@ is created. core.gitProxy:: A "proxy command" to execute (as 'command host port') instead of establishing direct connection to the remote server when - using the git protocol for fetching. If the variable value is + using the Git protocol for fetching. If the variable value is in the "COMMAND for DOMAIN" format, the command is applied only on hostnames ending with the specified domain string. This variable may be set multiple times and is matched in the given order; @@ -292,7 +359,7 @@ core.ignoreStat:: If true, commands which modify both the working tree and the index will mark the updated paths with the "assume unchanged" bit in the index. These marked files are then assumed to stay unchanged in the - working copy, until you mark them otherwise manually - Git will not + working tree, until you mark them otherwise manually - Git will not detect the file changes by lstat() calls. This is useful on systems where those are very slow, such as Microsoft Windows. See linkgit:git-update-index[1]. @@ -332,7 +399,7 @@ Note that this variable is honored even when set in a configuration file in a ".git" subdirectory of a directory and its value differs from the latter directory (e.g. "/path/to/.git/config" has core.worktree set to "/different/path"), which is most likely a -misconfiguration. Running git commands in the "/path/to" directory will +misconfiguration. Running Git commands in the "/path/to" directory will still use "/different/path" as the root of the work tree and can cause confusion unless you know what you are doing (e.g. you are creating a read-only snapshot of the same index to a location different from the @@ -364,7 +431,7 @@ core.sharedRepository:: several users in a group (making sure all the files and objects are group-writable). When 'all' (or 'world' or 'everybody'), the repository will be readable by all users, additionally to being - group-shareable. When 'umask' (or 'false'), git will use permissions + group-shareable. When 'umask' (or 'false'), Git will use permissions reported by umask(2). When '0xxx', where '0xxx' is an octal number, files in the repository will have this mode value. '0xxx' will override user's umask value (whereas the other options will only override @@ -375,8 +442,8 @@ core.sharedRepository:: See linkgit:git-init[1]. False by default. core.warnAmbiguousRefs:: - If true, git will warn you if the ref name you passed it is ambiguous - and might match multiple refs in the .git/refs/ tree. True by default. + If true, Git will warn you if the ref name you passed it is ambiguous + and might match multiple refs in the repository. True by default. core.compression:: An integer -1..9, indicating a default compression level. @@ -447,10 +514,12 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesfile:: In addition to '.gitignore' (per-directory) and - '.git/info/exclude', git looks into this file for patterns - of files which are not meant to be tracked. "{tilde}/" is expanded - to the value of `$HOME` and "{tilde}user/" to the specified user's - home directory. See linkgit:gitignore[5]. + '.git/info/exclude', Git looks into this file for patterns + of files which are not meant to be tracked. "`~/`" is expanded + to the value of `$HOME` and "`~user/`" to the specified user's + home directory. Its default value is $XDG_CONFIG_HOME/git/ignore. + If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore + is used instead. See linkgit:gitignore[5]. core.askpass:: Some commands (e.g. svn and http interfaces) that interactively @@ -463,9 +532,11 @@ core.askpass:: core.attributesfile:: In addition to '.gitattributes' (per-directory) and - '.git/info/attributes', git looks into this file for attributes + '.git/info/attributes', Git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same - way as for `core.excludesfile`. + way as for `core.excludesfile`. Its default value is + $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not + set or empty, $HOME/.config/git/attributes is used instead. core.editor:: Commands such as `commit` and `tag` that lets you edit @@ -473,23 +544,35 @@ core.editor:: variable when it is set, and the environment variable `GIT_EDITOR` is not set. See linkgit:git-var[1]. +core.commentchar:: + Commands such as `commit` and `tag` that lets you edit + messages consider a line that begins with this character + commented, and removes them after the editor returns + (default '#'). + +sequence.editor:: + Text editor used by `git rebase -i` for editing the rebase insn file. + The value is meant to be interpreted by the shell when it is used. + It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. + When not configured the default commit message editor is used instead. + core.pager:: - The command that git will use to paginate output. Can + The command that Git will use to paginate output. Can be overridden with the `GIT_PAGER` environment - variable. Note that git sets the `LESS` environment + variable. Note that Git sets the `LESS` environment variable to `FRSX` if it is unset when it runs the pager. One can change these settings by setting the `LESS` variable to some other value. Alternately, these settings can be overridden on a project or global basis by setting the `core.pager` option. - Setting `core.pager` has no affect on the `LESS` + Setting `core.pager` has no effect on the `LESS` environment variable behaviour above, so if you want - to override git's default settings this way, you need + to override Git's default settings this way, you need to be explicit. For example, to disable the S option in a backward compatible manner, set `core.pager` - to `less -+$LESS -FRX`. This will be passed to the - shell by git, which will translate the final command to - `LESS=FRSX less -+FRSX -FRX`. + to `less -+S`. This will be passed to the shell by + Git, which will translate the final command to + `LESS=FRSX less -+S`. core.whitespace:: A comma separated list of common whitespace problems to @@ -503,8 +586,9 @@ core.whitespace:: * `space-before-tab` treats a space character that appears immediately before a tab character in the initial indent part of the line as an error (enabled by default). -* `indent-with-non-tab` treats a line that is indented with 8 or more - space characters as an error (not enabled by default). +* `indent-with-non-tab` treats a line that is indented with space + characters instead of the equivalent tabs as an error (not enabled by + default). * `tab-in-indent` treats a tab character in the initial indent part of the line as an error (not enabled by default). * `blank-at-eof` treats blank lines added at the end of file as an error @@ -516,7 +600,7 @@ core.whitespace:: does not trigger if the character before such a carriage-return is not a whitespace (not enabled by default). * `tabwidth=<n>` tells how many character positions a tab occupies; this - is relevant for `indent-with-non-tab` and when git fixes `tab-in-indent` + is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent` errors. The default tab width is 8. Allowed values are 1 to 63. core.fsyncobjectfiles:: @@ -532,7 +616,7 @@ core.preloadindex:: + This can speed up operations like 'git diff' and 'git status' especially on filesystems like NFS that have weak caching semantics and thus -relatively high IO latencies. With this set to 'true', git will do the +relatively high IO latencies. With this set to 'true', Git will do the index comparison to the filesystem data in parallel, allowing overlapping IO's. @@ -568,9 +652,9 @@ add.ignore-errors:: add.ignoreErrors:: Tells 'git add' to continue adding files when some files cannot be added due to indexing errors. Equivalent to the '--ignore-errors' - option of linkgit:git-add[1]. Older versions of git accept only + option of linkgit:git-add[1]. Older versions of Git accept only `add.ignore-errors`, which does not follow the usual naming - convention for configuration variables. Newer versions of git + convention for configuration variables. Newer versions of Git honor `add.ignoreErrors` as well. alias.*:: @@ -578,7 +662,7 @@ alias.*:: after defining "alias.last = cat-file commit HEAD", the invocation "git last" is equivalent to "git cat-file commit HEAD". To avoid confusion and troubles with script usage, aliases that - hide existing git commands are ignored. Arguments are split by + hide existing Git commands are ignored. Arguments are split by spaces, the usual shell quoting and escaping is supported. quote pair and a backslash can be used to quote them. + @@ -625,7 +709,7 @@ branch.autosetupmerge:: branch.autosetuprebase:: When a new branch is created with 'git branch' or 'git checkout' - that tracks another branch, this variable tells git to set + that tracks another branch, this variable tells Git to set up pull to rebase instead of merge (see "branch.<name>.rebase"). When `never`, rebase is never automatically set to true. When `local`, rebase is set to true for tracked branches of @@ -670,10 +754,18 @@ branch.<name>.mergeoptions:: branch.<name>.rebase:: When true, rebase the branch <name> on top of the fetched branch, instead of merging the default branch from the default remote when - "git pull" is run. - *NOTE*: this is a possibly dangerous operation; do *not* use - it unless you understand the implications (see linkgit:git-rebase[1] - for details). + "git pull" is run. See "pull.rebase" for doing this in a non + branch-specific manner. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand the implications (see linkgit:git-rebase[1] +for details). + +branch.<name>.description:: + Branch description, can be edited with + `git branch --edit-description`. Branch description is + automatically added in the format-patch cover letter or + request-pull summary. browser.<tool>.cmd:: Specify the command to invoke the specified browser. The @@ -798,7 +890,7 @@ color.status.<slot>:: one of `header` (the header text of the status message), `added` or `updated` (files which are added but not committed), `changed` (files which are changed but not added in the index), - `untracked` (files which are not tracked by git), + `untracked` (files which are not tracked by Git), `branch` (the current branch), or `nobranch` (the color the 'no branch' warning is shown in, defaulting to red). The values of these variables may be specified as in @@ -812,9 +904,56 @@ color.ui:: to `always` if you want all output not intended for machine consumption to use color, to `true` or `auto` if you want such output to use color when written to the terminal, or to `false` or - `never` if you prefer git commands not to use color unless enabled + `never` if you prefer Git commands not to use color unless enabled explicitly with some other configuration or the `--color` option. +column.ui:: + Specify whether supported commands should output in columns. + This variable consists of a list of tokens separated by spaces + or commas: ++ +-- +`always`;; + always show in columns +`never`;; + never show in columns +`auto`;; + show in columns if the output is to the terminal +`column`;; + fill columns before rows (default) +`row`;; + fill rows before columns +`plain`;; + show in one column +`dense`;; + make unequal size columns to utilize more space +`nodense`;; + make equal size columns +-- ++ +This option defaults to 'never'. + +column.branch:: + Specify whether to output branch listing in `git branch` in columns. + See `column.ui` for details. + +column.status:: + Specify whether to output untracked files in `git status` in columns. + See `column.ui` for details. + +column.tag:: + Specify whether to output tag listing in `git tag` in columns. + See `column.ui` for details. + +commit.cleanup:: + This setting overrides the default of the `--cleanup` option in + `git commit`. See linkgit:git-commit[1] for details. Changing the + default can be useful when you always want to keep lines that begin + with comment character `#` in your log message, in which case you + would do `git config commit.cleanup whitespace` (note that you will + have to remove the help lines that begin with `#` in the commit log + template yourself, if you do this). + commit.status:: A boolean to enable/disable inclusion of status information in the commit message template when using an editor to prepare the commit @@ -822,9 +961,32 @@ commit.status:: commit.template:: Specify a file to use as the template for new commit messages. - "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the specified user's home directory. +credential.helper:: + Specify an external helper to be called when a username or + password credential is needed; the helper may consult external + storage to avoid prompting the user for the credentials. See + linkgit:gitcredentials[7] for details. + +credential.useHttpPath:: + When acquiring credentials, consider the "path" component of an http + or https URL to be important. Defaults to false. See + linkgit:gitcredentials[7] for more information. + +credential.username:: + If no username is set for a network authentication, use this username + by default. See credential.<context>.* below, and + linkgit:gitcredentials[7]. + +credential.<url>.*:: + Any of the credential.* options above can be applied selectively to + some credentials. For example "credential.https://example.com.username" + would set the default username only for https connections to + example.com. See linkgit:gitcredentials[7] for details on how URLs are + matched. + include::diff-config.txt[] difftool.<tool>.path:: @@ -842,12 +1004,6 @@ difftool.<tool>.cmd:: difftool.prompt:: Prompt before each invocation of the diff tool. -diff.wordRegex:: - A POSIX Extended Regular Expression used to determine what is a "word" - when performing word-by-word difference calculations. Character - sequences that match the regular expression are "words", all other - characters are *ignorable* whitespace. - fetch.recurseSubmodules:: This option can be either set to a boolean value or to 'on-demand'. Setting it to a boolean changes the behavior of fetch and pull to @@ -857,8 +1013,15 @@ fetch.recurseSubmodules:: when its superproject retrieves a commit that updates the submodule's reference. +fetch.fsckObjects:: + If it is set to true, git-fetch-pack will check all fetched + objects. It will abort in the case of a malformed object or a + broken link. The result of an abort are only dangling objects. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. + fetch.unpackLimit:: - If the number of objects fetched over the git native + If the number of objects fetched over the Git native transfer is below this limit, then the objects will be unpacked into loose object files. However if the number of received objects equals or @@ -898,7 +1061,7 @@ format.subjectprefix:: format.signature:: The default for format-patch is to output a signature containing - the git version number. Use this variable to change that default. + the Git version number. Use this variable to change that default. Set this variable to the empty string ("") to suppress signature generation. @@ -917,7 +1080,7 @@ format.thread:: a boolean value, or `shallow` or `deep`. `shallow` threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the - `\--in-reply-to`, and the first patch mail, in this order. + `--in-reply-to`, and the first patch mail, in this order. `deep` threading makes every mail a reply to the previous one. A true boolean value is the same as `shallow`, and a false value disables threading. @@ -1011,7 +1174,7 @@ gitcvs.logfile:: gitcvs.usecrlfattr:: If true, the server will look up the end-of-line conversion attributes for files to determine the '-k' modes to use. If - the attributes force git to treat a file as text, + the attributes force Git to treat a file as text, the '-k' mode will be left blank so CVS clients will treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging @@ -1031,7 +1194,7 @@ gitcvs.allbinary:: gitcvs.dbname:: Database used by git-cvsserver to cache revision information - derived from the git repository. The exact meaning depends on the + derived from the Git repository. The exact meaning depends on the used database driver, for SQLite (which is the default driver) this is a filename. Supports variable substitution (see linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`). @@ -1064,11 +1227,47 @@ All gitcvs variables except for 'gitcvs.usecrlfattr' and is one of "ext" and "pserver") to make them apply only for the given access method. +gitweb.category:: +gitweb.description:: +gitweb.owner:: +gitweb.url:: + See linkgit:gitweb[1] for description. + +gitweb.avatar:: +gitweb.blame:: +gitweb.grep:: +gitweb.highlight:: +gitweb.patches:: +gitweb.pickaxe:: +gitweb.remote_heads:: +gitweb.showsizes:: +gitweb.snapshot:: + See linkgit:gitweb.conf[5] for description. + grep.lineNumber:: If set to true, enable '-n' option by default. +grep.patternType:: + Set the default matching behavior. Using a value of 'basic', 'extended', + 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp', + '--fixed-strings', or '--perl-regexp' option accordingly, while the + value 'default' will return to the default matching behavior. + grep.extendedRegexp:: - If set to true, enable '--extended-regexp' option by default. + If set to true, enable '--extended-regexp' option by default. This + option is ignored when the 'grep.patternType' option is set to a value + other than 'default'. + +gpg.program:: + Use this custom program instead of "gpg" found on $PATH when + making or verifying a PGP signature. The program must support the + same command line interface as GPG, namely, to verify a detached + signature, "gpg --verify $file - <$signature" is run, and the + program is expected to signal a good signature by exiting with + code 0, and to generate an ascii-armored detached signature, the + standard input of "gpg -bsau $key" is fed with the contents to be + signed, and the program is expected to send the result to its + standard output. gui.commitmsgwidth:: Defines how wide the commit message window is in the @@ -1193,10 +1392,25 @@ help.autocorrect:: value is 0 - the command will be just shown but not executed. This is the default. +help.htmlpath:: + Specify the path where the HTML documentation resides. File system paths + and URLs are supported. HTML pages will be prefixed with this path when + help is displayed in the 'web' format. This defaults to the documentation + path of your Git installation. + http.proxy:: - Override the HTTP proxy, normally configured using the 'http_proxy' - environment variable (see linkgit:curl[1]). This can be overridden - on a per-remote basis; see remote.<name>.proxy + Override the HTTP proxy, normally configured using the 'http_proxy', + 'https_proxy', and 'all_proxy' environment variables (see + `curl(1)`). This can be overridden on a per-remote basis; see + remote.<name>.proxy + +http.cookiefile:: + File containing previously stored cookie lines which should be used + in the Git http session, if they match the server. The file format + of the file to read cookies from should be plain HTTP headers or + the Netscape/Mozilla cookie file format (see linkgit:curl[1]). + NOTE that the file specified with http.cookiefile is only used as + input. No cookies will be stored in the file. http.sslVerify:: Whether to verify the SSL certificate when fetching or pushing @@ -1214,7 +1428,7 @@ http.sslKey:: variable. http.sslCertPasswordProtected:: - Enable git's password prompt for the SSL certificate. Otherwise + Enable Git's password prompt for the SSL certificate. Otherwise OpenSSL will prompt the user, possibly many times, if the certificate or private key is encrypted. Can be overridden by the 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable. @@ -1261,7 +1475,7 @@ http.noEPSV:: http.useragent:: The HTTP USER_AGENT string presented to an HTTP server. The default - value represents the version of the client git such as git/1.7.1. + value represents the version of the client Git such as git/1.7.1. This option allows you to override this value to a more common value such as Mozilla/4.0. This may be necessary, for instance, if connecting through a firewall that restricts HTTP connections to a set @@ -1269,7 +1483,7 @@ http.useragent:: Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable. i18n.commitEncoding:: - Character encoding the commit messages are stored in; git itself + Character encoding the commit messages are stored in; Git itself does not care per se, but this information is necessary e.g. when importing commits from emails or in the gitk graphical history browser (and possibly at other places in the future or in other @@ -1311,7 +1525,7 @@ instaweb.port:: interactive.singlekey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). - Currently this is used by the `\--patch` mode of + Currently this is used by the `--patch` mode of linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this setting is silently ignored if portable keystroke input @@ -1319,13 +1533,13 @@ interactive.singlekey:: log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may - override this option with `\--no-abbrev-commit`. + linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may + override this option with `--no-abbrev-commit`. log.date:: Set the default date-time mode for the 'log' command. Setting a value for log.date is similar to using 'git log''s - `\--date` option. Possible values are `relative`, `local`, + `--date` option. Possible values are `relative`, `local`, `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1] for details. @@ -1342,6 +1556,10 @@ log.showroot:: Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which normally hide the root commit will now show it. True by default. +log.mailmap:: + If true, makes linkgit:git-log[1], linkgit:git-show[1], and + linkgit:git-whatchanged[1] assume `--use-mailmap`. + mailmap.file:: The location of an augmenting mailmap file. The default mailmap, located in the root of the repository, is loaded @@ -1350,6 +1568,14 @@ mailmap.file:: subdirectory, or somewhere outside of the repository itself. See linkgit:git-shortlog[1] and linkgit:git-blame[1]. +mailmap.blob:: + Like `mailmap.file`, but consider the value as a reference to a + blob in the repository. If both `mailmap.file` and + `mailmap.blob` are given, both are parsed, with entries from + `mailmap.file` taking precedence. In a bare repository, this + defaults to `HEAD:.mailmap`. In a non-bare repository, it + defaults to empty. + man.viewer:: Specify the programs that may be used to display help in the 'man' format. See linkgit:git-help[1]. @@ -1395,7 +1621,7 @@ mergetool.keepBackup:: `true` (i.e. keep the backup files). mergetool.keepTemporaries:: - When invoking a custom merge tool, git uses a set of temporary + When invoking a custom merge tool, Git uses a set of temporary files to pass to the tool. If the tool returns an error and this variable is set to `true`, then these temporary files will be preserved, otherwise they will be removed after the tool has @@ -1423,7 +1649,7 @@ displayed. notes.rewrite.<command>:: When rewriting commits with <command> (currently `amend` or - `rebase`) and this variable is set to `true`, git + `rebase`) and this variable is set to `true`, Git automatically copies your notes from the original to the rewritten commit. Defaults to `true`, but see "notes.rewriteRef" below. @@ -1503,7 +1729,7 @@ pack.threads:: warning. This is meant to reduce packing time on multiprocessor machines. The required amount of memory for the delta search window is however multiplied by the number of threads. - Specifying 0 will cause git to auto-detect the number of CPU's + Specifying 0 will cause Git to auto-detect the number of CPU's and set the number of threads accordingly. pack.indexVersion:: @@ -1515,18 +1741,18 @@ pack.indexVersion:: and this config option ignored whenever the corresponding pack is larger than 2 GB. + -If you have an old git that does not understand the version 2 `{asterisk}.idx` file, +If you have an old Git that does not understand the version 2 `*.idx` file, cloning or fetching over a non native protocol (e.g. "http" and "rsync") -that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the +that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your -older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however, +older version of Git. If the `*.pack` file is smaller than 2 GB, however, you can use linkgit:git-index-pack[1] on the *.pack file to regenerate -the `{asterisk}.idx` file. +the `*.idx` file. pack.packSizeLimit:: The maximum size of a pack. This setting only affects packing to a file when repacking, i.e. the git:// protocol - is unaffected. It can be overridden by the `\--max-pack-size` + is unaffected. It can be overridden by the `--max-pack-size` option of linkgit:git-repack[1]. The minimum size allowed is limited to 1 MiB. The default is unlimited. Common unit suffixes of 'k', 'm', or 'g' are @@ -1534,10 +1760,10 @@ pack.packSizeLimit:: pager.<cmd>:: If the value is boolean, turns on or off pagination of the - output of a particular git subcommand when writing to a tty. + output of a particular Git subcommand when writing to a tty. Otherwise, turns on pagination for the subcommand using the - pager specified by the value of `pager.<cmd>`. If `\--paginate` - or `\--no-pager` is specified on the command line, it takes + pager specified by the value of `pager.<cmd>`. If `--paginate` + or `--no-pager` is specified on the command line, it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. @@ -1545,12 +1771,22 @@ pretty.<name>:: Alias for a --pretty= format string, as specified in linkgit:git-log[1]. Any aliases defined here can be used just as the built-in pretty formats could. For example, - running `git config pretty.changelog "format:{asterisk} %H %s"` + running `git config pretty.changelog "format:* %H %s"` would cause the invocation `git log --pretty=changelog` - to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + to be equivalent to running `git log "--pretty=format:* %H %s"`. Note that an alias with the same name as a built-in format will be silently ignored. +pull.rebase:: + When true, rebase branches on top of the fetched branch, instead + of merging the default branch from the default remote when "git + pull" is run. See "branch.<name>.rebase" for setting this on a + per-branch basis. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand the implications (see linkgit:git-rebase[1] +for details). + pull.octopus:: The default merge strategy to use when pulling multiple branches at once. @@ -1559,18 +1795,39 @@ pull.twohead:: The default merge strategy to use when pulling a single branch. push.default:: - Defines the action git push should take if no refspec is given + Defines the action `git push` should take if no refspec is given on the command line, no refspec is configured in the remote, and no refspec is implied by any of the options given on the command line. Possible values are: + +-- * `nothing` - do not push anything. -* `matching` - push all matching branches. - All branches having the same name in both ends are considered to be - matching. This is the default. -* `upstream` - push the current branch to its upstream branch. -* `tracking` - deprecated synonym for `upstream`. +* `matching` - push all branches having the same name in both ends. + This is for those who prepare all the branches into a publishable + shape and then push them out with a single command. It is not + appropriate for pushing into a repository shared by multiple users, + since locally stalled branches will attempt a non-fast forward push + if other users updated the branch. + + + This is currently the default, but Git 2.0 will change the default + to `simple`. +* `upstream` - push the current branch to its upstream branch + (`tracking` is a deprecated synonym for this). + With this, `git push` will update the same remote ref as the one which + is merged by `git pull`, making `push` and `pull` symmetrical. + See "branch.<name>.merge" for how to configure the upstream branch. +* `simple` - like `upstream`, but refuses to push if the upstream + branch's name is different from the local one. This is the safest + option and is well-suited for beginners. It will become the default + in Git 2.0. * `current` - push the current branch to a branch of the same name. +-- ++ +The `simple`, `current` and `upstream` modes are for those who want to +push out a single branch after finishing work, even when the other +branches are not yet ready to be pushed out. If you are working with +other people to push into the same shared repository, you would want +to use one of these. rebase.stat:: Whether to show a diffstat of what changed upstream since the last @@ -1588,7 +1845,8 @@ receive.fsckObjects:: If it is set to true, git-receive-pack will check all received objects. It will abort in the case of a malformed object or a broken link. The result of an abort are only dangling objects. - Defaults to false. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. receive.unpackLimit:: If the number of objects received in a push is below this @@ -1623,6 +1881,15 @@ receive.denyNonFastForwards:: even if that push is forced. This configuration variable is set when initializing a shared repository. +receive.hiderefs:: + String(s) `receive-pack` uses to decide which refs to omit + from its initial advertisement. Use more than one + definitions to specify multiple prefix strings. A ref that + are under the hierarchies listed on the value of this + variable is excluded, and is hidden when responding to `git + push`, and an attempt to update or delete a hidden ref by + `git push` is rejected. + receive.updateserverinfo:: If set to true, git-receive-pack will run git-update-server-info after receiving data from git-push and updating refs. @@ -1649,7 +1916,7 @@ remote.<name>.push:: remote.<name>.mirror:: If true, pushing to this remote will automatically behave - as if the `\--mirror` option was given on the command line. + as if the `--mirror` option was given on the command line. remote.<name>.skipDefaultUpdate:: If true, this remote will be skipped by default when updating @@ -1678,7 +1945,7 @@ remote.<name>.tagopt:: linkgit:git-fetch[1]. remote.<name>.vcs:: - Setting this to a value <vcs> will cause git to interact with + Setting this to a value <vcs> will cause Git to interact with the remote with the git-remote-<vcs> helper. remotes.<group>:: @@ -1688,9 +1955,9 @@ remotes.<group>:: repack.usedeltabaseoffset:: By default, linkgit:git-repack[1] creates packs that use delta-base offset. If you need to share your repository with - git older than version 1.4.4, either directly or via a dumb + Git older than version 1.4.4, either directly or via a dumb protocol such as http, then you need to set this option to - "false" and repack. Access from old git versions over the + "false" and repack. Access from old Git versions over the native protocol are unaffected by this option. rerere.autoupdate:: @@ -1759,7 +2026,7 @@ showbranch.default:: status.relativePaths:: By default, linkgit:git-status[1] shows paths relative to the current directory. Setting this variable to `false` shows paths - relative to the repository root (this was the default for git + relative to the repository root (this was the default for Git prior to v1.5.4). status.showUntrackedFiles:: @@ -1797,6 +2064,12 @@ submodule.<name>.update:: URL and other values found in the `.gitmodules` file. See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. +submodule.<name>.branch:: + The remote branch name for a submodule, used by `git submodule + update --remote`. Set this option to override the value found in + the `.gitmodules` file. See linkgit:git-submodule[1] and + linkgit:gitmodules[5] for details. + submodule.<name>.fetchRecurseSubmodules:: This option can be used to control recursive fetching of this submodule. It can be overridden by using the --[no-]recurse-submodules @@ -1824,18 +2097,37 @@ tar.umask:: archiving user's umask will be used instead. See umask(2) and linkgit:git-archive[1]. +transfer.fsckObjects:: + When `fetch.fsckObjects` or `receive.fsckObjects` are + not set, the value of this variable is used instead. + Defaults to false. + +transfer.hiderefs:: + This variable can be used to set both `receive.hiderefs` + and `uploadpack.hiderefs` at the same time to the same + values. See entries for these other variables. + transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are not set, the value of this variable is used instead. The default value is 100. +uploadpack.hiderefs:: + String(s) `upload-pack` uses to decide which refs to omit + from its initial advertisement. Use more than one + definitions to specify multiple prefix strings. A ref that + are under the hierarchies listed on the value of this + variable is excluded, and is hidden from `git ls-remote`, + `git fetch`, etc. An attempt to fetch a hidden ref by `git + fetch` will fail. + url.<base>.insteadOf:: Any URL that starts with this value will be rewritten to start, instead, with <base>. In cases where some site serves a large number of repositories, and serves them with multiple access methods, and some users need to use different access methods, this feature allows people to specify any of the - equivalent URLs and have git automatically rewrite the URL to + equivalent URLs and have Git automatically rewrite the URL to the best alternative for the particular user, even for a never-before-seen repository on the site. When more than one insteadOf strings match a given URL, the longest match is used. @@ -1846,11 +2138,11 @@ url.<base>.pushInsteadOf:: resulting URL will be pushed to. In cases where some site serves a large number of repositories, and serves them with multiple access methods, some of which do not allow push, this feature - allows people to specify a pull-only URL and have git + allows people to specify a pull-only URL and have Git automatically use an appropriate URL to push, even for a never-before-seen repository on the site. When more than one pushInsteadOf strings match a given URL, the longest match is - used. If a remote has an explicit pushurl, git will ignore this + used. If a remote has an explicit pushurl, Git will ignore this setting for that remote. user.email:: |