diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 196 |
1 files changed, 154 insertions, 42 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index 0e1168c066..bf8f911e1f 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -86,6 +86,19 @@ customary UNIX fashion. Some variables may require a special value format. +Includes +~~~~~~~~ + +You can include one config file from another by setting the special +`include.path` variable to the name of the file to be included. The +included file is expanded immediately, as if its contents had been +found at the location of the include directive. If the value of the +`include.path` variable is a relative path, the path is considered to be +relative to the configuration file in which the include directive was +found. The value of `include.path` is subject to tilde expansion: `~/` +is expanded to the value of `$HOME`, and `~user/` to the specified +user's home directory. See below for examples. + Example ~~~~~~~ @@ -108,6 +121,11 @@ Example gitProxy="ssh" for "kernel.org" gitProxy=default-proxy ; for the rest + [include] + path = /path/to/foo.inc ; include by absolute path + path = foo ; expand "foo" relative to the current file + path = ~/foo ; expand "foo" in your $HOME directory + Variables ~~~~~~~~~ @@ -123,12 +141,29 @@ advice.*:: + -- pushNonFastForward:: - Advice shown when linkgit:git-push[1] refuses - non-fast-forward refs. + Set this variable to 'false' if you want to disable + 'pushNonFFCurrent', 'pushNonFFDefault', and + 'pushNonFFMatching' simultaneously. + pushNonFFCurrent:: + Advice shown when linkgit:git-push[1] fails due to a + non-fast-forward update to the current branch. + pushNonFFDefault:: + Advice to set 'push.default' to 'upstream' or 'current' + when you ran linkgit:git-push[1] and pushed 'matching + refs' by default (i.e. you did not provide an explicit + refspec, and no 'push.default' configuration was set) + and it resulted in a non-fast-forward error. + pushNonFFMatching:: + Advice shown when you ran linkgit:git-push[1] and pushed + 'matching refs' explicitly (i.e. you used ':', or + specified a refspec that isn't your current branch) and + it resulted in a non-fast-forward error. statusHints:: - Directions on how to stage/unstage/add shown in the - output of linkgit:git-status[1] and the template shown - when writing commit messages. + Show directions on how to proceed from the current + state in the output of linkgit:git-status[1], in + the template shown when writing commit messages in + linkgit:git-commit[1], and in the help message shown + by linkgit:git-checkout[1] when switching branch. commitBeforeMerge:: Advice shown when linkgit:git-merge[1] refuses to merge to avoid overwriting local changes. @@ -143,6 +178,9 @@ advice.*:: Advice shown when you used linkgit:git-checkout[1] to move to the detach HEAD state, to instruct how to create a local branch after the fact. + amWorkDir:: + Advice that shows the location of the patch file when + linkgit:git-am[1] fails to apply it. -- core.fileMode:: @@ -177,6 +215,15 @@ The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] will probe and set core.ignorecase true if appropriate when the repository is created. +core.precomposeunicode:: + This option is only used by Mac OS implementation of git. + When core.precomposeunicode=true, git reverts the unicode decomposition + of filenames done by Mac OS. This is useful when sharing a repository + between Mac OS and Linux or Windows. + (Git for Windows 1.7.10 or higher is needed, or git under cygwin 1.7). + When false, file names are handled fully transparent by git, + which is backward compatible with older versions of git. + core.trustctime:: If false, the ctime differences between the index and the working tree are ignored; useful when the inode change time @@ -448,9 +495,11 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesfile:: In addition to '.gitignore' (per-directory) and '.git/info/exclude', git looks into this file for patterns - of files which are not meant to be tracked. "{tilde}/" is expanded - to the value of `$HOME` and "{tilde}user/" to the specified user's - home directory. See linkgit:gitignore[5]. + of files which are not meant to be tracked. "`~/`" is expanded + to the value of `$HOME` and "`~user/`" to the specified user's + home directory. Its default value is $XDG_CONFIG_HOME/git/ignore. + If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore + is used instead. See linkgit:gitignore[5]. core.askpass:: Some commands (e.g. svn and http interfaces) that interactively @@ -465,7 +514,9 @@ core.attributesfile:: In addition to '.gitattributes' (per-directory) and '.git/info/attributes', git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same - way as for `core.excludesfile`. + way as for `core.excludesfile`. Its default value is + $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not + set or empty, $HOME/.config/git/attributes is used instead. core.editor:: Commands such as `commit` and `tag` that lets you edit @@ -488,14 +539,14 @@ core.pager:: `LESS` variable to some other value. Alternately, these settings can be overridden on a project or global basis by setting the `core.pager` option. - Setting `core.pager` has no affect on the `LESS` + Setting `core.pager` has no effect on the `LESS` environment variable behaviour above, so if you want to override git's default settings this way, you need to be explicit. For example, to disable the S option in a backward compatible manner, set `core.pager` - to `less -+$LESS -FRX`. This will be passed to the - shell by git, which will translate the final command to - `LESS=FRSX less -+FRSX -FRX`. + to `less -+S`. This will be passed to the shell by + git, which will translate the final command to + `LESS=FRSX less -+S`. core.whitespace:: A comma separated list of common whitespace problems to @@ -509,8 +560,9 @@ core.whitespace:: * `space-before-tab` treats a space character that appears immediately before a tab character in the initial indent part of the line as an error (enabled by default). -* `indent-with-non-tab` treats a line that is indented with 8 or more - space characters as an error (not enabled by default). +* `indent-with-non-tab` treats a line that is indented with space + characters instead of the equivalent tabs as an error (not enabled by + default). * `tab-in-indent` treats a tab character in the initial indent part of the line as an error (not enabled by default). * `blank-at-eof` treats blank lines added at the end of file as an error @@ -823,6 +875,44 @@ color.ui:: `never` if you prefer git commands not to use color unless enabled explicitly with some other configuration or the `--color` option. +column.ui:: + Specify whether supported commands should output in columns. + This variable consists of a list of tokens separated by spaces + or commas: ++ +-- +`always`;; + always show in columns +`never`;; + never show in columns +`auto`;; + show in columns if the output is to the terminal +`column`;; + fill columns before rows (default) +`row`;; + fill rows before columns +`plain`;; + show in one column +`dense`;; + make unequal size columns to utilize more space +`nodense`;; + make equal size columns +-- ++ +This option defaults to 'never'. + +column.branch:: + Specify whether to output branch listing in `git branch` in columns. + See `column.ui` for details. + +column.status:: + Specify whether to output untracked files in `git status` in columns. + See `column.ui` for details. + +column.tag:: + Specify whether to output tag listing in `git tag` in columns. + See `column.ui` for details. + commit.status:: A boolean to enable/disable inclusion of status information in the commit message template when using an editor to prepare the commit @@ -830,7 +920,7 @@ commit.status:: commit.template:: Specify a file to use as the template for new commit messages. - "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the specified user's home directory. credential.helper:: @@ -873,12 +963,6 @@ difftool.<tool>.cmd:: difftool.prompt:: Prompt before each invocation of the diff tool. -diff.wordRegex:: - A POSIX Extended Regular Expression used to determine what is a "word" - when performing word-by-word difference calculations. Character - sequences that match the regular expression are "words", all other - characters are *ignorable* whitespace. - fetch.recurseSubmodules:: This option can be either set to a boolean value or to 'on-demand'. Setting it to a boolean changes the behavior of fetch and pull to @@ -955,7 +1039,7 @@ format.thread:: a boolean value, or `shallow` or `deep`. `shallow` threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the - `\--in-reply-to`, and the first patch mail, in this order. + `--in-reply-to`, and the first patch mail, in this order. `deep` threading makes every mail a reply to the previous one. A true boolean value is the same as `shallow`, and a false value disables threading. @@ -1122,8 +1206,16 @@ gitweb.snapshot:: grep.lineNumber:: If set to true, enable '-n' option by default. +grep.patternType:: + Set the default matching behavior. Using a value of 'basic', 'extended', + 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp', + '--fixed-strings', or '--perl-regexp' option accordingly, while the + value 'default' will return to the default matching behavior. + grep.extendedRegexp:: - If set to true, enable '--extended-regexp' option by default. + If set to true, enable '--extended-regexp' option by default. This + option is ignored when the 'grep.patternType' option is set to a value + other than 'default'. gpg.program:: Use this custom program instead of "gpg" found on $PATH when @@ -1386,7 +1478,7 @@ instaweb.port:: interactive.singlekey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). - Currently this is used by the `\--patch` mode of + Currently this is used by the `--patch` mode of linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this setting is silently ignored if portable keystroke input @@ -1394,13 +1486,13 @@ interactive.singlekey:: log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may - override this option with `\--no-abbrev-commit`. + linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may + override this option with `--no-abbrev-commit`. log.date:: Set the default date-time mode for the 'log' command. Setting a value for log.date is similar to using 'git log''s - `\--date` option. Possible values are `relative`, `local`, + `--date` option. Possible values are `relative`, `local`, `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1] for details. @@ -1590,18 +1682,18 @@ pack.indexVersion:: and this config option ignored whenever the corresponding pack is larger than 2 GB. + -If you have an old git that does not understand the version 2 `{asterisk}.idx` file, +If you have an old git that does not understand the version 2 `*.idx` file, cloning or fetching over a non native protocol (e.g. "http" and "rsync") -that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the +that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your -older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however, +older version of git. If the `*.pack` file is smaller than 2 GB, however, you can use linkgit:git-index-pack[1] on the *.pack file to regenerate -the `{asterisk}.idx` file. +the `*.idx` file. pack.packSizeLimit:: The maximum size of a pack. This setting only affects packing to a file when repacking, i.e. the git:// protocol - is unaffected. It can be overridden by the `\--max-pack-size` + is unaffected. It can be overridden by the `--max-pack-size` option of linkgit:git-repack[1]. The minimum size allowed is limited to 1 MiB. The default is unlimited. Common unit suffixes of 'k', 'm', or 'g' are @@ -1611,8 +1703,8 @@ pager.<cmd>:: If the value is boolean, turns on or off pagination of the output of a particular git subcommand when writing to a tty. Otherwise, turns on pagination for the subcommand using the - pager specified by the value of `pager.<cmd>`. If `\--paginate` - or `\--no-pager` is specified on the command line, it takes + pager specified by the value of `pager.<cmd>`. If `--paginate` + or `--no-pager` is specified on the command line, it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. @@ -1620,9 +1712,9 @@ pretty.<name>:: Alias for a --pretty= format string, as specified in linkgit:git-log[1]. Any aliases defined here can be used just as the built-in pretty formats could. For example, - running `git config pretty.changelog "format:{asterisk} %H %s"` + running `git config pretty.changelog "format:* %H %s"` would cause the invocation `git log --pretty=changelog` - to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + to be equivalent to running `git log "--pretty=format:* %H %s"`. Note that an alias with the same name as a built-in format will be silently ignored. @@ -1649,13 +1741,33 @@ push.default:: no refspec is implied by any of the options given on the command line. Possible values are: + +-- * `nothing` - do not push anything. -* `matching` - push all matching branches. - All branches having the same name in both ends are considered to be - matching. This is the default. +* `matching` - push all branches having the same name in both ends. + This is for those who prepare all the branches into a publishable + shape and then push them out with a single command. It is not + appropriate for pushing into a repository shared by multiple users, + since locally stalled branches will attempt a non-fast forward push + if other users updated the branch. + + + This is currently the default, but Git 2.0 will change the default + to `simple`. * `upstream` - push the current branch to its upstream branch. -* `tracking` - deprecated synonym for `upstream`. + With this, `git push` will update the same remote ref as the one which + is merged by `git pull`, making `push` and `pull` symmetrical. + See "branch.<name>.merge" for how to configure the upstream branch. +* `simple` - like `upstream`, but refuses to push if the upstream + branch's name is different from the local one. This is the safest + option and is well-suited for beginners. It will become the default + in Git 2.0. * `current` - push the current branch to a branch of the same name. +-- ++ +The `simple`, `current` and `upstream` modes are for those who want to +push out a single branch after finishing work, even when the other +branches are not yet ready to be pushed out. If you are working with +other people to push into the same shared repository, you would want +to use one of these. rebase.stat:: Whether to show a diffstat of what changed upstream since the last @@ -1735,7 +1847,7 @@ remote.<name>.push:: remote.<name>.mirror:: If true, pushing to this remote will automatically behave - as if the `\--mirror` option was given on the command line. + as if the `--mirror` option was given on the command line. remote.<name>.skipDefaultUpdate:: If true, this remote will be skipped by default when updating |