diff options
Diffstat (limited to 'Documentation/config.txt')
| -rw-r--r-- | Documentation/config.txt | 114 |
1 files changed, 95 insertions, 19 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index c55c22ab7b..ac781a44d7 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -204,13 +204,26 @@ advice.*:: -- core.fileMode:: - If false, the executable bit differences between the index and - the working tree are ignored; useful on broken filesystems like FAT. - See linkgit:git-update-index[1]. + Tells Git if the executable bit of files in the working tree + is to be honored. + -The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] -will probe and set core.fileMode false if appropriate when the -repository is created. +Some filesystems lose the executable bit when a file that is +marked as executable is checked out, or checks out an +non-executable file with executable bit on. +linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem +to see if it handles the executable bit correctly +and this variable is automatically set as necessary. ++ +A repository, however, may be on a filesystem that handles +the filemode correctly, and this variable is set to 'true' +when created, but later may be made accessible from another +environment that loses the filemode (e.g. exporting ext4 via +CIFS mount, visiting a Cygwin created repository with +Git for Windows or Eclipse). +In such a case it may be necessary to set this variable to 'false'. +See linkgit:git-update-index[1]. ++ +The default is true (when core.filemode is not specified in the config file). core.ignorecase:: If true, this option enables various workarounds to enable @@ -233,6 +246,17 @@ core.precomposeunicode:: When false, file names are handled fully transparent by Git, which is backward compatible with older versions of Git. +core.protectHFS:: + If set to true, do not allow checkout of paths that would + be considered equivalent to `.git` on an HFS+ filesystem. + Defaults to `true` on Mac OS, and `false` elsewhere. + +core.protectNTFS:: + If set to true, do not allow checkout of paths that would + cause problems with the NTFS filesystem, e.g. conflict with + 8.3 "short" names. + Defaults to `true` on Windows, and `false` elsewhere. + core.trustctime:: If false, the ctime differences between the index and the working tree are ignored; useful when the inode change time @@ -499,7 +523,8 @@ core.bigFileThreshold:: Files larger than this size are stored deflated, without attempting delta compression. Storing large files without delta compression avoids excessive memory usage, at the - slight expense of increased disk usage. + slight expense of increased disk usage. Additionally files + larger than this size are always treated as binary. + Default is 512 MiB on all platforms. This should be reasonable for most projects as source code and other text files can still @@ -669,7 +694,7 @@ alias.*:: confusion and troubles with script usage, aliases that hide existing Git commands are ignored. Arguments are split by spaces, the usual shell quoting and escaping is supported. - quote pair and a backslash can be used to quote them. + A quote pair or a backslash can be used to quote them. + If the alias expansion is prefixed with an exclamation point, it will be treated as a shell command. For example, defining @@ -825,6 +850,10 @@ accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`, `blink` and `reverse`. The first color given is the foreground; the second is the background. The position of the attribute, if any, doesn't matter. ++ +Colors (foreground and background) may also be given as numbers between +0 and 255; these use ANSI 256-color mode (but note that not all +terminals may support this). color.diff:: Whether to use ANSI escape sequences to add color to patches. @@ -871,7 +900,11 @@ color.grep.<slot>:: `linenumber`;; line number prefix (when using `-n`) `match`;; - matching text + matching text (same as setting `matchContext` and `matchSelected`) +`matchContext`;; + matching text in context lines +`matchSelected`;; + matching text in selected lines `selected`;; non-matching text in selected lines `separator`;; @@ -1192,7 +1225,7 @@ gc.autopacklimit:: default value is 50. Setting this to 0 disables it. gc.autodetach:: - Make `git gc --auto` return immediately andrun in background + Make `git gc --auto` return immediately and run in background if the system supports it. Default is true. gc.packrefs:: @@ -1339,7 +1372,7 @@ gpg.program:: same command-line interface as GPG, namely, to verify a detached signature, "gpg --verify $file - <$signature" is run, and the program is expected to signal a good signature by exiting with - code 0, and to generate an ascii-armored detached signature, the + code 0, and to generate an ASCII-armored detached signature, the standard input of "gpg -bsau $key" is fed with the contents to be signed, and the program is expected to send the result to its standard output. @@ -1574,7 +1607,7 @@ http.useragent:: Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable. http.<url>.*:: - Any of the http.* options above can be applied selectively to some urls. + Any of the http.* options above can be applied selectively to some URLs. For a config key to match a URL, each element of the config key is compared to that of the URL, in the following order: + @@ -1613,8 +1646,8 @@ if the URL is `https://user@example.com/foo/bar` a config key match of + All URLs are normalized before attempting any matching (the password part, if embedded in the URL, is always ignored for matching purposes) so that -equivalent urls that are simply spelled differently will match properly. -Environment variable settings always override any matches. The urls that are +equivalent URLs that are simply spelled differently will match properly. +Environment variable settings always override any matches. The URLs that are matched against are those given directly to Git commands. This means any URLs visited as a result of a redirection do not participate in matching. @@ -1754,6 +1787,15 @@ mergetool.<tool>.trustExitCode:: if the file has been updated, otherwise the user is prompted to indicate the success of the merge. +mergetool.meld.hasOutput:: + Older versions of `meld` do not support the `--output` option. + Git will attempt to detect whether `meld` supports `--output` + by inspecting the output of `meld --help`. Configuring + `mergetool.meld.hasOutput` will make Git skip these checks and + use the configured value instead. Setting `mergetool.meld.hasOutput` + to `true` tells Git to unconditionally use the `--output` option, + and `false` avoids using `--output`. + mergetool.keepBackup:: After performing a merge, the original file with conflict markers can be saved as a file with a `.orig` extension. If this variable @@ -1767,6 +1809,12 @@ mergetool.keepTemporaries:: preserved, otherwise they will be removed after the tool has exited. Defaults to `false`. +mergetool.writeToTemp:: + Git writes temporary 'BASE', 'LOCAL', and 'REMOTE' versions of + conflicting files in the worktree by default. Git will attempt + to use a temporary directory for these files when set `true`. + Defaults to `false`. + mergetool.prompt:: Prompt before each invocation of the merge resolution program. @@ -1827,10 +1875,11 @@ pack.depth:: maximum depth is given on the command line. Defaults to 50. pack.windowMemory:: - The window memory size limit used by linkgit:git-pack-objects[1] - when no limit is given on the command line. The value can be - suffixed with "k", "m", or "g". Defaults to 0, meaning no - limit. + The maximum size of memory that is consumed by each thread + in linkgit:git-pack-objects[1] for pack window memory when + no limit is given on the command line. The value can be + suffixed with "k", "m", or "g". When left unconfigured (or + set explicitly to 0), there will be no limit. pack.compression:: An integer -1..9, indicating the compression level for objects @@ -2043,6 +2092,25 @@ receive.autogc:: receiving data from git-push and updating refs. You can stop it by setting this variable to false. +receive.certnonceseed:: + By setting this variable to a string, `git receive-pack` + will accept a `git push --signed` and verifies it by using + a "nonce" protected by HMAC using this string as a secret + key. + +receive.certnonceslop:: + When a `git push --signed` sent a push certificate with a + "nonce" that was issued by a receive-pack serving the same + repository within this many seconds, export the "nonce" + found in the certificate to `GIT_PUSH_CERT_NONCE` to the + hooks (instead of what the receive-pack asked the sending + side to include). This may allow writing checks in + `pre-receive` and `post-receive` a bit easier. Instead of + checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable + that records by how many seconds the nonce is stale to + decide if they want to accept the certificate, they only + can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`. + receive.fsckObjects:: If it is set to true, git-receive-pack will check all received objects. It will abort in the case of a malformed object or a @@ -2076,6 +2144,13 @@ receive.denyCurrentBranch:: print a warning of such a push to stderr, but allow the push to proceed. If set to false or "ignore", allow such pushes with no message. Defaults to "refuse". ++ +Another option is "updateInstead" which will update the working +directory (must be clean) if pushing into the current branch. This option is +intended for synchronizing working directories when one side is not easily +accessible via interactive ssh (e.g. a live web site, hence the requirement +that the working directory be clean). This mode also comes in handy when +developing inside a VM to test and fix code on different Operating Systems. receive.denyNonFastForwards:: If set to true, git-receive-pack will deny a ref update which is @@ -2250,6 +2325,7 @@ sendemail.smtpserverport:: sendemail.smtpserveroption:: sendemail.smtpuser:: sendemail.thread:: +sendemail.transferencoding:: sendemail.validate:: See linkgit:git-send-email[1] for description. @@ -2286,7 +2362,7 @@ status.showUntrackedFiles:: files which are not currently tracked by Git. Directories which contain only untracked files, are shown with the directory name only. Showing untracked files means that Git needs to lstat() all - all the files in the whole repository, which might be slow on some + the files in the whole repository, which might be slow on some systems. So, this variable controls how the commands displays the untracked files. Possible values are: + |