summaryrefslogtreecommitdiff
path: root/Documentation/config.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/config.txt')
-rw-r--r--Documentation/config.txt246
1 files changed, 212 insertions, 34 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt
index e43d147825..d5c9c4cab6 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -79,18 +79,84 @@ escape sequences) are invalid.
Includes
~~~~~~~~
-You can include one config file from another by setting the special
-`include.path` variable to the name of the file to be included. The
-variable takes a pathname as its value, and is subject to tilde
-expansion.
+The `include` and `includeIf` sections allow you to include config
+directives from another source. These sections behave identically to
+each other with the exception that `includeIf` sections may be ignored
+if their condition does not evaluate to true; see "Conditional includes"
+below.
-The
-included file is expanded immediately, as if its contents had been
-found at the location of the include directive. If the value of the
-`include.path` variable is a relative path, the path is considered to be
-relative to the configuration file in which the include directive was
-found. See below for examples.
+You can include a config file from another by setting the special
+`include.path` (or `includeIf.*.path`) variable to the name of the file
+to be included. The variable takes a pathname as its value, and is
+subject to tilde expansion. These variables can be given multiple times.
+The contents of the included file are inserted immediately, as if they
+had been found at the location of the include directive. If the value of the
+variable is a relative path, the path is considered to
+be relative to the configuration file in which the include directive
+was found. See below for examples.
+
+Conditional includes
+~~~~~~~~~~~~~~~~~~~~
+
+You can include a config file from another conditionally by setting a
+`includeIf.<condition>.path` variable to the name of the file to be
+included.
+
+The condition starts with a keyword followed by a colon and some data
+whose format and meaning depends on the keyword. Supported keywords
+are:
+
+`gitdir`::
+
+ The data that follows the keyword `gitdir:` is used as a glob
+ pattern. If the location of the .git directory matches the
+ pattern, the include condition is met.
++
+The .git location may be auto-discovered, or come from `$GIT_DIR`
+environment variable. If the repository is auto discovered via a .git
+file (e.g. from submodules, or a linked worktree), the .git location
+would be the final location where the .git directory is, not where the
+.git file is.
++
+The pattern can contain standard globbing wildcards and two additional
+ones, `**/` and `/**`, that can match multiple path components. Please
+refer to linkgit:gitignore[5] for details. For convenience:
+
+ * If the pattern starts with `~/`, `~` will be substituted with the
+ content of the environment variable `HOME`.
+
+ * If the pattern starts with `./`, it is replaced with the directory
+ containing the current config file.
+
+ * If the pattern does not start with either `~/`, `./` or `/`, `**/`
+ will be automatically prepended. For example, the pattern `foo/bar`
+ becomes `**/foo/bar` and would match `/any/path/to/foo/bar`.
+
+ * If the pattern ends with `/`, `**` will be automatically added. For
+ example, the pattern `foo/` becomes `foo/**`. In other words, it
+ matches "foo" and everything inside, recursively.
+
+`gitdir/i`::
+ This is the same as `gitdir` except that matching is done
+ case-insensitively (e.g. on case-insensitive file sytems)
+
+A few more notes on matching via `gitdir` and `gitdir/i`:
+
+ * Symlinks in `$GIT_DIR` are not resolved before matching.
+
+ * Both the symlink & realpath versions of paths will be matched
+ outside of `$GIT_DIR`. E.g. if ~/git is a symlink to
+ /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git`
+ will match.
++
+This was not the case in the initial release of this feature in
+v2.13.0, which only matched the realpath version. Configuration that
+wants to be compatible with the initial release of this feature needs
+to either specify only the realpath version, or both versions.
+
+ * Note that "../" is not special and will match literally, which is
+ unlikely what you want.
Example
~~~~~~~
@@ -116,9 +182,26 @@ Example
[include]
path = /path/to/foo.inc ; include by absolute path
- path = foo ; expand "foo" relative to the current file
- path = ~/foo ; expand "foo" in your `$HOME` directory
+ path = foo.inc ; find "foo.inc" relative to the current file
+ path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory
+
+ ; include if $GIT_DIR is /path/to/foo/.git
+ [includeIf "gitdir:/path/to/foo/.git"]
+ path = /path/to/foo.inc
+
+ ; include for all repositories inside /path/to/group
+ [includeIf "gitdir:/path/to/group/"]
+ path = /path/to/foo.inc
+
+ ; include for all repositories inside $HOME/to/group
+ [includeIf "gitdir:~/to/group/"]
+ path = /path/to/foo.inc
+ ; relative paths are always relative to the including
+ ; file (if the condition is true); their location is not
+ ; affected by the condition
+ [includeIf "gitdir:/path/to/group/"]
+ path = foo.inc
Values
~~~~~~
@@ -265,6 +348,9 @@ advice.*::
rmHints::
In case of failure in the output of linkgit:git-rm[1],
show directions on how to proceed from the current state.
+ addEmbeddedRepo::
+ Advice on what to do when you've accidentally added one
+ git repo inside of another.
--
core.fileMode::
@@ -272,7 +358,7 @@ core.fileMode::
is to be honored.
+
Some filesystems lose the executable bit when a file that is
-marked as executable is checked out, or checks out an
+marked as executable is checked out, or checks out a
non-executable file with executable bit on.
linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem
to see if it handles the executable bit correctly
@@ -334,6 +420,10 @@ core.trustctime::
crawlers and some backup systems).
See linkgit:git-update-index[1]. True by default.
+core.splitIndex::
+ If true, the split-index feature of the index will be used.
+ See linkgit:git-update-index[1]. False by default.
+
core.untrackedCache::
Determines what to do about the untracked cache feature of the
index. It will be kept, if this variable is unset or set to
@@ -350,16 +440,19 @@ core.checkStat::
all fields, including the sub-second part of mtime and ctime.
core.quotePath::
- The commands that output paths (e.g. 'ls-files',
- 'diff'), when not given the `-z` option, will quote
- "unusual" characters in the pathname by enclosing the
- pathname in a double-quote pair and with backslashes the
- same way strings in C source code are quoted. If this
- variable is set to false, the bytes higher than 0x80 are
- not quoted but output as verbatim. Note that double
- quote, backslash and control characters are always
- quoted without `-z` regardless of the setting of this
- variable.
+ Commands that output paths (e.g. 'ls-files', 'diff'), will
+ quote "unusual" characters in the pathname by enclosing the
+ pathname in double-quotes and escaping those characters with
+ backslashes in the same way C escapes control characters (e.g.
+ `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with
+ values larger than 0x80 (e.g. octal `\302\265` for "micro" in
+ UTF-8). If this variable is set to false, bytes higher than
+ 0x80 are not considered "unusual" any more. Double-quotes,
+ backslash and control characters are always escaped regardless
+ of the setting of this variable. A simple space character is
+ not considered "unusual". Many commands can output pathnames
+ completely verbatim using the `-z` option. The default value
+ is true.
core.eol::
Sets the line ending type to use in the working directory for
@@ -593,7 +686,8 @@ core.packedGitLimit::
bytes at once to complete an operation it will unmap existing
regions to reclaim virtual address space within the process.
+
-Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms.
+Default is 256 MiB on 32 bit platforms and 32 TiB (effectively
+unlimited) on 64 bit platforms.
This should be reasonable for all users/operating systems, except on
the largest projects. You probably do not need to adjust this value.
+
@@ -793,6 +887,7 @@ core.abbrev::
computed based on the approximate number of packed objects
in your repository, which hopefully is enough for
abbreviated object names to stay unique for some time.
+ The minimum length is 4.
add.ignoreErrors::
add.ignore-errors (deprecated)::
@@ -1068,7 +1163,10 @@ color.status.<slot>::
`untracked` (files which are not tracked by Git),
`branch` (the current branch),
`nobranch` (the color the 'no branch' warning is shown in, defaulting
- to red), or
+ to red),
+ `localBranch` or `remoteBranch` (the local and remote branch names,
+ respectively, when branch and tracking information is displayed in the
+ status short-format), or
`unmerged` (files which have unmerged changes).
color.ui::
@@ -1925,7 +2023,10 @@ http.<url>.*::
must match exactly between the config key and the URL.
. Host/domain name (e.g., `example.com` in `https://example.com/`).
- This field must match exactly between the config key and the URL.
+ This field must match between the config key and the URL. It is
+ possible to specify a `*` as part of the host name to match all subdomains
+ at this level. `https://*.example.com/` for example would match
+ `https://foo.example.com/`, but not `https://foo.bar.example.com/`.
. Port number (e.g., `8080` in `http://example.com:8080/`).
This field must match exactly between the config key and the URL.
@@ -1960,6 +2061,17 @@ Environment variable settings always override any matches. The URLs that are
matched against are those given directly to Git commands. This means any URLs
visited as a result of a redirection do not participate in matching.
+ssh.variant::
+ Depending on the value of the environment variables `GIT_SSH` or
+ `GIT_SSH_COMMAND`, or the config setting `core.sshCommand`, Git
+ auto-detects whether to adjust its command-line parameters for use
+ with plink or tortoiseplink, as opposed to the default (OpenSSH).
++
+The config variable `ssh.variant` can be set to override this auto-detection;
+valid values are `ssh`, `plink`, `putty` or `tortoiseplink`. Any other value
+will be treated as normal ssh. This setting can be overridden via the
+environment variable `GIT_SSH_VARIANT`.
+
i18n.commitEncoding::
Character encoding the commit messages are stored in; Git itself
does not care per se, but this information is necessary e.g. when
@@ -2057,6 +2169,10 @@ log.showRoot::
Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
normally hide the root commit will now show it. True by default.
+log.showSignature::
+ If true, makes linkgit:git-log[1], linkgit:git-show[1], and
+ linkgit:git-whatchanged[1] assume `--show-signature`.
+
log.mailmap::
If true, makes linkgit:git-log[1], linkgit:git-show[1], and
linkgit:git-whatchanged[1] assume `--use-mailmap`.
@@ -2508,7 +2624,7 @@ rebase.autoSquash::
If set to true enable `--autosquash` option by default.
rebase.autoStash::
- When set to true, automatically create a temporary stash
+ When set to true, automatically create a temporary stash entry
before the operation begins, and apply it after the operation
ends. This means that you can run rebase on a dirty worktree.
However, use with care: the final stash application after a
@@ -2537,9 +2653,8 @@ receive.advertiseAtomic::
capability, set this variable to false.
receive.advertisePushOptions::
- By default, git-receive-pack will advertise the push options
- capability to its clients. If you don't want to advertise this
- capability, set this variable to false.
+ When set to true, git-receive-pack will advertise the push options
+ capability to its clients. False by default.
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
@@ -2831,10 +2946,45 @@ sendemail.xmailer::
sendemail.signedoffcc (deprecated)::
Deprecated alias for `sendemail.signedoffbycc`.
+sendemail.smtpBatchSize::
+ Number of messages to be sent per connection, after that a relogin
+ will happen. If the value is 0 or undefined, send all messages in
+ one connection.
+ See also the `--batch-size` option of linkgit:git-send-email[1].
+
+sendemail.smtpReloginDelay::
+ Seconds wait before reconnecting to smtp server.
+ See also the `--relogin-delay` option of linkgit:git-send-email[1].
+
showbranch.default::
The default set of branches for linkgit:git-show-branch[1].
See linkgit:git-show-branch[1].
+splitIndex.maxPercentChange::
+ When the split index feature is used, this specifies the
+ percent of entries the split index can contain compared to the
+ total number of entries in both the split index and the shared
+ index before a new shared index is written.
+ The value should be between 0 and 100. If the value is 0 then
+ a new shared index is always written, if it is 100 a new
+ shared index is never written.
+ By default the value is 20, so a new shared index is written
+ if the number of entries in the split index would be greater
+ than 20 percent of the total number of entries.
+ See linkgit:git-update-index[1].
+
+splitIndex.sharedIndexExpire::
+ When the split index feature is used, shared index files that
+ were not modified since the time this variable specifies will
+ be removed when a new shared index file is created. The value
+ "now" expires all entries immediately, and "never" suppresses
+ expiration altogether.
+ The default value is "2.weeks.ago".
+ Note that a shared index file is considered modified (for the
+ purpose of expiration) each time a new split-index file is
+ either created based on it or read from it.
+ See linkgit:git-update-index[1].
+
status.relativePaths::
By default, linkgit:git-status[1] shows paths relative to the
current directory. Setting this variable to `false` shows paths
@@ -2856,6 +3006,11 @@ status.displayCommentPrefix::
behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
Defaults to false.
+status.showStash::
+ If set to true, linkgit:git-status[1] will display the number of
+ entries currently stashed away.
+ Defaults to false.
+
status.showUntrackedFiles::
By default, linkgit:git-status[1] and linkgit:git-commit[1] show
files which are not currently tracked by Git. Directories which
@@ -2893,20 +3048,21 @@ status.submoduleSummary::
stash.showPatch::
If this is set to true, the `git stash show` command without an
- option will show the stash in patch form. Defaults to false.
+ option will show the stash entry in patch form. Defaults to false.
See description of 'show' command in linkgit:git-stash[1].
stash.showStat::
If this is set to true, the `git stash show` command without an
- option will show diffstat of the stash. Defaults to true.
+ option will show diffstat of the stash entry. Defaults to true.
See description of 'show' command in linkgit:git-stash[1].
submodule.<name>.url::
The URL for a submodule. This variable is copied from the .gitmodules
file to the git config via 'git submodule init'. The user can change
the configured URL before obtaining the submodule via 'git submodule
- update'. After obtaining the submodule, the presence of this variable
- is used as a sign whether the submodule is of interest to git commands.
+ update'. If neither submodule.<name>.active or submodule.active are
+ set, the presence of this variable is used as a fallback to indicate
+ whether the submodule is of interest to git commands.
See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
submodule.<name>.update::
@@ -2944,6 +3100,21 @@ submodule.<name>.ignore::
"--ignore-submodules" option. The 'git submodule' commands are not
affected by this setting.
+submodule.<name>.active::
+ Boolean value indicating if the submodule is of interest to git
+ commands. This config option takes precedence over the
+ submodule.active config option.
+
+submodule.active::
+ A repeated field which contains a pathspec used to match against a
+ submodule's path to determine if the submodule is of interest to git
+ commands.
+
+submodule.recurse::
+ Specifies if commands recurse into submodules by default. This
+ applies to all commands that have a `--recurse-submodules` option.
+ Defaults to false.
+
submodule.fetchJobs::
Specifies how many submodules are fetched/cloned at the same time.
A positive integer allows up to that number of submodules fetched
@@ -3089,6 +3260,13 @@ url.<base>.insteadOf::
the best alternative for the particular user, even for a
never-before-seen repository on the site. When more than one
insteadOf strings match a given URL, the longest match is used.
++
+Note that any protocol restrictions will be applied to the rewritten
+URL. If the rewrite changes the URL to use a custom protocol or remote
+helper, you may need to adjust the `protocol.*.allow` config to permit
+the request. In particular, protocols you expect to use for submodules
+must be set to `always` rather than the default of `user`. See the
+description of `protocol.allow` above.
url.<base>.pushInsteadOf::
Any URL that starts with this value will not be pushed to;