diff options
Diffstat (limited to 'Documentation/SubmittingPatches')
| -rw-r--r-- | Documentation/SubmittingPatches | 525 |
1 files changed, 525 insertions, 0 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches new file mode 100644 index 0000000000..558d465b65 --- /dev/null +++ b/Documentation/SubmittingPatches @@ -0,0 +1,525 @@ +Here are some guidelines for people who want to contribute their code +to this software. + +(0) Decide what to base your work on. + +In general, always base your work on the oldest branch that your +change is relevant to. + + - A bugfix should be based on 'maint' in general. If the bug is not + present in 'maint', base it on 'master'. For a bug that's not yet + in 'master', find the topic that introduces the regression, and + base your work on the tip of the topic. + + - A new feature should be based on 'master' in general. If the new + feature depends on a topic that is in 'pu', but not in 'master', + base your work on the tip of that topic. + + - Corrections and enhancements to a topic not yet in 'master' should + be based on the tip of that topic. If the topic has not been merged + to 'next', it's alright to add a note to squash minor corrections + into the series. + + - In the exceptional case that a new feature depends on several topics + not in 'master', start working on 'next' or 'pu' privately and send + out patches for discussion. Before the final merge, you may have to + wait until some of the dependent topics graduate to 'master', and + rebase your work. + + - Some parts of the system have dedicated maintainers with their own + repositories (see the section "Subsystems" below). Changes to + these parts should be based on their trees. + +To find the tip of a topic branch, run "git log --first-parent +master..pu" and look for the merge commit. The second parent of this +commit is the tip of the topic branch. + +(1) Make separate commits for logically separate changes. + +Unless your patch is really trivial, you should not be sending +out a patch that was generated between your working tree and +your commit head. Instead, always make a commit with complete +commit message and generate a series of patches from your +repository. It is a good discipline. + +Give an explanation for the change(s) that is detailed enough so +that people can judge if it is good thing to do, without reading +the actual patch text to determine how well the code does what +the explanation promises to do. + +If your description starts to get too long, that's a sign that you +probably need to split up your commit to finer grained pieces. +That being said, patches which plainly describe the things that +help reviewers check the patch, and future maintainers understand +the code, are the most beautiful patches. Descriptions that summarize +the point in the subject well, and describe the motivation for the +change, the approach taken by the change, and if relevant how this +differs substantially from the prior version, are all good things +to have. + +Make sure that you have tests for the bug you are fixing. See +t/README for guidance. + +When adding a new feature, make sure that you have new tests to show +the feature triggers the new behavior when it should, and to show the +feature does not trigger when it shouldn't. After any code change, make +sure that the entire test suite passes. + +If you have an account at GitHub (and you can get one for free to work +on open source projects), you can use their Travis CI integration to +test your changes on Linux, Mac (and hopefully soon Windows). See +GitHub-Travis CI hints section for details. + +Do not forget to update the documentation to describe the updated +behavior and make sure that the resulting documentation set formats +well. It is currently a liberal mixture of US and UK English norms for +spelling and grammar, which is somewhat unfortunate. A huge patch that +touches the files all over the place only to correct the inconsistency +is not welcome, though. Potential clashes with other changes that can +result from such a patch are not worth it. We prefer to gradually +reconcile the inconsistencies in favor of US English, with small and +easily digestible patches, as a side effect of doing some other real +work in the vicinity (e.g. rewriting a paragraph for clarity, while +turning en_UK spelling to en_US). Obvious typographical fixes are much +more welcomed ("teh -> "the"), preferably submitted as independent +patches separate from other documentation changes. + +Oh, another thing. We are picky about whitespaces. Make sure your +changes do not trigger errors with the sample pre-commit hook shipped +in templates/hooks--pre-commit. To help ensure this does not happen, +run "git diff --check" on your changes before you commit. + + +(2) Describe your changes well. + +The first line of the commit message should be a short description (50 +characters is the soft limit, see DISCUSSION in git-commit(1)), and +should skip the full stop. It is also conventional in most cases to +prefix the first line with "area: " where the area is a filename or +identifier for the general area of the code being modified, e.g. + + . doc: clarify distinction between sign-off and pgp-signing + . githooks.txt: improve the intro section + +If in doubt which identifier to use, run "git log --no-merges" on the +files you are modifying to see the current conventions. + +It's customary to start the remainder of the first line after "area: " +with a lower-case letter. E.g. "doc: clarify...", not "doc: +Clarify...", or "githooks.txt: improve...", not "githooks.txt: +Improve...". + +The body should provide a meaningful commit message, which: + + . explains the problem the change tries to solve, i.e. what is wrong + with the current code without the change. + + . justifies the way the change solves the problem, i.e. why the + result with the change is better. + + . alternate solutions considered but discarded, if any. + +Describe your changes in imperative mood, e.g. "make xyzzy do frotz" +instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy +to do frotz", as if you are giving orders to the codebase to change +its behavior. Try to make sure your explanation can be understood +without external resources. Instead of giving a URL to a mailing list +archive, summarize the relevant points of the discussion. + +If you want to reference a previous commit in the history of a stable +branch, use the format "abbreviated sha1 (subject, date)", +with the subject enclosed in a pair of double-quotes, like this: + + Commit f86a374 ("pack-bitmap.c: fix a memleak", 2015-03-30) + noticed that ... + +The "Copy commit summary" command of gitk can be used to obtain this +format, or this invocation of "git show": + + git show -s --date=short --pretty='format:%h ("%s", %ad)' <commit> + +(3) Generate your patch using Git tools out of your commits. + +Git based diff tools generate unidiff which is the preferred format. + +You do not have to be afraid to use -M option to "git diff" or +"git format-patch", if your patch involves file renames. The +receiving end can handle them just fine. + +Please make sure your patch does not add commented out debugging code, +or include any extra files which do not relate to what your patch +is trying to achieve. Make sure to review +your patch after generating it, to ensure accuracy. Before +sending out, please make sure it cleanly applies to the "master" +branch head. If you are preparing a work based on "next" branch, +that is fine, but please mark it as such. + + +(4) Sending your patches. + +Learn to use format-patch and send-email if possible. These commands +are optimized for the workflow of sending patches, avoiding many ways +your existing e-mail client that is optimized for "multipart/*" mime +type e-mails to corrupt and render your patches unusable. + +People on the Git mailing list need to be able to read and +comment on the changes you are submitting. It is important for +a developer to be able to "quote" your changes, using standard +e-mail tools, so that they may comment on specific portions of +your code. For this reason, each patch should be submitted +"inline" in a separate message. + +Multiple related patches should be grouped into their own e-mail +thread to help readers find all parts of the series. To that end, +send them as replies to either an additional "cover letter" message +(see below), the first patch, or the respective preceding patch. + +If your log message (including your name on the +Signed-off-by line) is not writable in ASCII, make sure that +you send off a message in the correct encoding. + +WARNING: Be wary of your MUAs word-wrap +corrupting your patch. Do not cut-n-paste your patch; you can +lose tabs that way if you are not careful. + +It is a common convention to prefix your subject line with +[PATCH]. This lets people easily distinguish patches from other +e-mail discussions. Use of additional markers after PATCH and +the closing bracket to mark the nature of the patch is also +encouraged. E.g. [PATCH/RFC] is often used when the patch is +not ready to be applied but it is for discussion, [PATCH v2], +[PATCH v3] etc. are often seen when you are sending an update to +what you have previously sent. + +"git format-patch" command follows the best current practice to +format the body of an e-mail message. At the beginning of the +patch should come your commit message, ending with the +Signed-off-by: lines, and a line that consists of three dashes, +followed by the diffstat information and the patch itself. If +you are forwarding a patch from somebody else, optionally, at +the beginning of the e-mail message just before the commit +message starts, you can put a "From: " line to name that person. + +You often want to add additional explanation about the patch, +other than the commit message itself. Place such "cover letter" +material between the three-dash line and the diffstat. For +patches requiring multiple iterations of review and discussion, +an explanation of changes between each iteration can be kept in +Git-notes and inserted automatically following the three-dash +line via `git format-patch --notes`. + +Do not attach the patch as a MIME attachment, compressed or not. +Do not let your e-mail client send quoted-printable. Do not let +your e-mail client send format=flowed which would destroy +whitespaces in your patches. Many +popular e-mail applications will not always transmit a MIME +attachment as plain text, making it impossible to comment on +your code. A MIME attachment also takes a bit more time to +process. This does not decrease the likelihood of your +MIME-attached change being accepted, but it makes it more likely +that it will be postponed. + +Exception: If your mailer is mangling patches then someone may ask +you to re-send them using MIME, that is OK. + +Do not PGP sign your patch. Most likely, your maintainer or other people on the +list would not have your PGP key and would not bother obtaining it anyway. +Your patch is not judged by who you are; a good patch from an unknown origin +has a far better chance of being accepted than a patch from a known, respected +origin that is done poorly or does incorrect things. + +If you really really really really want to do a PGP signed +patch, format it as "multipart/signed", not a text/plain message +that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is +not a text/plain, it's something else. + +Send your patch with "To:" set to the mailing list, with "cc:" listing +people who are involved in the area you are touching (the output from +"git blame $path" and "git shortlog --no-merges $path" would help to +identify them), to solicit comments and reviews. + +After the list reached a consensus that it is a good idea to apply the +patch, re-send it with "To:" set to the maintainer [*1*] and "cc:" the +list [*2*] for inclusion. + +Do not forget to add trailers such as "Acked-by:", "Reviewed-by:" and +"Tested-by:" lines as necessary to credit people who helped your +patch. + + [Addresses] + *1* The current maintainer: gitster@pobox.com + *2* The mailing list: git@vger.kernel.org + + +(5) Certify your work by adding your "Signed-off-by: " line + +To improve tracking of who did what, we've borrowed the +"sign-off" procedure from the Linux kernel project on patches +that are being emailed around. Although core Git is a lot +smaller project it is a good discipline to follow it. + +The sign-off is a simple line at the end of the explanation for +the patch, which certifies that you wrote it or otherwise have +the right to pass it on as a open-source patch. The rules are +pretty simple: if you can certify the below D-C-O: + + Developer's Certificate of Origin 1.1 + + By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I + have the right to submit it under the open source license + indicated in the file; or + + (b) The contribution is based upon previous work that, to the best + of my knowledge, is covered under an appropriate open source + license and I have the right under that license to submit that + work with modifications, whether created in whole or in part + by me, under the same open source license (unless I am + permitted to submit under a different license), as indicated + in the file; or + + (c) The contribution was provided directly to me by some other + person who certified (a), (b) or (c) and I have not modified + it. + + (d) I understand and agree that this project and the contribution + are public and that a record of the contribution (including all + personal information I submit with it, including my sign-off) is + maintained indefinitely and may be redistributed consistent with + this project or the open source license(s) involved. + +then you just add a line saying + + Signed-off-by: Random J Developer <random@developer.example.org> + +This line can be automatically added by Git if you run the git-commit +command with the -s option. + +Notice that you can place your own Signed-off-by: line when +forwarding somebody else's patch with the above rules for +D-C-O. Indeed you are encouraged to do so. Do not forget to +place an in-body "From: " line at the beginning to properly attribute +the change to its true author (see (2) above). + +Also notice that a real name is used in the Signed-off-by: line. Please +don't hide your real name. + +If you like, you can put extra tags at the end: + +1. "Reported-by:" is used to credit someone who found the bug that + the patch attempts to fix. +2. "Acked-by:" says that the person who is more familiar with the area + the patch attempts to modify liked the patch. +3. "Reviewed-by:", unlike the other tags, can only be offered by the + reviewer and means that she is completely satisfied that the patch + is ready for application. It is usually offered only after a + detailed review. +4. "Tested-by:" is used to indicate that the person applied the patch + and found it to have the desired effect. + +You can also create your own tag or use one that's in common usage +such as "Thanks-to:", "Based-on-patch-by:", or "Mentored-by:". + +------------------------------------------------ +Subsystems with dedicated maintainers + +Some parts of the system have dedicated maintainers with their own +repositories. + + - git-gui/ comes from git-gui project, maintained by Pat Thoyts: + + git://repo.or.cz/git-gui.git + + - gitk-git/ comes from Paul Mackerras's gitk project: + + git://ozlabs.org/~paulus/gitk + + - po/ comes from the localization coordinator, Jiang Xin: + + https://github.com/git-l10n/git-po/ + +Patches to these parts should be based on their trees. + +------------------------------------------------ +An ideal patch flow + +Here is an ideal patch flow for this project the current maintainer +suggests to the contributors: + + (0) You come up with an itch. You code it up. + + (1) Send it to the list and cc people who may need to know about + the change. + + The people who may need to know are the ones whose code you + are butchering. These people happen to be the ones who are + most likely to be knowledgeable enough to help you, but + they have no obligation to help you (i.e. you ask for help, + don't demand). "git log -p -- $area_you_are_modifying" would + help you find out who they are. + + (2) You get comments and suggestions for improvements. You may + even get them in a "on top of your change" patch form. + + (3) Polish, refine, and re-send to the list and the people who + spend their time to improve your patch. Go back to step (2). + + (4) The list forms consensus that the last round of your patch is + good. Send it to the maintainer and cc the list. + + (5) A topic branch is created with the patch and is merged to 'next', + and cooked further and eventually graduates to 'master'. + +In any time between the (2)-(3) cycle, the maintainer may pick it up +from the list and queue it to 'pu', in order to make it easier for +people play with it without having to pick up and apply the patch to +their trees themselves. + +------------------------------------------------ +Know the status of your patch after submission + +* You can use Git itself to find out when your patch is merged in + master. 'git pull --rebase' will automatically skip already-applied + patches, and will let you know. This works only if you rebase on top + of the branch in which your patch has been merged (i.e. it will not + tell you if your patch is merged in pu if you rebase on top of + master). + +* Read the Git mailing list, the maintainer regularly posts messages + entitled "What's cooking in git.git" and "What's in git.git" giving + the status of various proposed changes. + +-------------------------------------------------- +GitHub-Travis CI hints + +With an account at GitHub (you can get one for free to work on open +source projects), you can use Travis CI to test your changes on Linux, +Mac (and hopefully soon Windows). You can find a successful example +test build here: https://travis-ci.org/git/git/builds/120473209 + +Follow these steps for the initial setup: + + (1) Fork https://github.com/git/git to your GitHub account. + You can find detailed instructions how to fork here: + https://help.github.com/articles/fork-a-repo/ + + (2) Open the Travis CI website: https://travis-ci.org + + (3) Press the "Sign in with GitHub" button. + + (4) Grant Travis CI permissions to access your GitHub account. + You can find more information about the required permissions here: + https://docs.travis-ci.com/user/github-oauth-scopes + + (5) Open your Travis CI profile page: https://travis-ci.org/profile + + (6) Enable Travis CI builds for your Git fork. + +After the initial setup, Travis CI will run whenever you push new changes +to your fork of Git on GitHub. You can monitor the test state of all your +branches here: https://travis-ci.org/<Your GitHub handle>/git/branches + +If a branch did not pass all test cases then it is marked with a red +cross. In that case you can click on the failing Travis CI job and +scroll all the way down in the log. Find the line "<-- Click here to see +detailed test output!" and click on the triangle next to the log line +number to expand the detailed test output. Here is such a failing +example: https://travis-ci.org/git/git/jobs/122676187 + +Fix the problem and push your fix to your Git fork. This will trigger +a new Travis CI build to ensure all tests pass. + + +------------------------------------------------ +MUA specific hints + +Some of patches I receive or pick up from the list share common +patterns of breakage. Please make sure your MUA is set up +properly not to corrupt whitespaces. + +See the DISCUSSION section of git-format-patch(1) for hints on +checking your patch by mailing it to yourself and applying with +git-am(1). + +While you are at it, check the resulting commit log message from +a trial run of applying the patch. If what is in the resulting +commit is not exactly what you would want to see, it is very +likely that your maintainer would end up hand editing the log +message when he applies your patch. Things like "Hi, this is my +first patch.\n", if you really want to put in the patch e-mail, +should come after the three-dash line that signals the end of the +commit message. + + +Pine +---- + +(Johannes Schindelin) + +I don't know how many people still use pine, but for those poor +souls it may be good to mention that the quell-flowed-text is +needed for recent versions. + +... the "no-strip-whitespace-before-send" option, too. AFAIK it +was introduced in 4.60. + +(Linus Torvalds) + +And 4.58 needs at least this. + +--- +diff-tree 8326dd8350be64ac7fc805f6563a1d61ad10d32c (from e886a61f76edf5410573e92e38ce22974f9c40f1) +Author: Linus Torvalds <torvalds@g5.osdl.org> +Date: Mon Aug 15 17:23:51 2005 -0700 + + Fix pine whitespace-corruption bug + + There's no excuse for unconditionally removing whitespace from + the pico buffers on close. + +diff --git a/pico/pico.c b/pico/pico.c +--- a/pico/pico.c ++++ b/pico/pico.c +@@ -219,7 +219,9 @@ PICO *pm; + switch(pico_all_done){ /* prepare for/handle final events */ + case COMP_EXIT : /* already confirmed */ + packheader(); ++#if 0 + stripwhitespace(); ++#endif + c |= COMP_EXIT; + break; + + +(Daniel Barkalow) + +> A patch to SubmittingPatches, MUA specific help section for +> users of Pine 4.63 would be very much appreciated. + +Ah, it looks like a recent version changed the default behavior to do the +right thing, and inverted the sense of the configuration option. (Either +that or Gentoo did it.) So you need to set the +"no-strip-whitespace-before-send" option, unless the option you have is +"strip-whitespace-before-send", in which case you should avoid checking +it. + + +Thunderbird, KMail, GMail +------------------------- + +See the MUA-SPECIFIC HINTS section of git-format-patch(1). + +Gnus +---- + +'|' in the *Summary* buffer can be used to pipe the current +message to an external program, and this is a handy way to drive +"git am". However, if the message is MIME encoded, what is +piped into the program is the representation you see in your +*Article* buffer after unwrapping MIME. This is often not what +you would want for two reasons. It tends to screw up non ASCII +characters (most notably in people's names), and also +whitespaces (fatal in patches). Running 'C-u g' to display the +message in raw form before using '|' to run the pipe can work +this problem around. |