diff options
Diffstat (limited to 'Documentation/RelNotes')
| -rw-r--r-- | Documentation/RelNotes/1.9.1.txt | 59 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.0.txt | 271 |
2 files changed, 330 insertions, 0 deletions
diff --git a/Documentation/RelNotes/1.9.1.txt b/Documentation/RelNotes/1.9.1.txt new file mode 100644 index 0000000000..5b0602053c --- /dev/null +++ b/Documentation/RelNotes/1.9.1.txt @@ -0,0 +1,59 @@ +Git v1.9.1 Release Notes +======================== + +Fixes since v1.9.0 +------------------ + + * "git clean -d pathspec" did not use the given pathspec correctly + and ended up cleaning too much. + + * "git difftool" misbehaved when the repository is bound to the + working tree with the ".git file" mechanism, where a textual file + ".git" tells us where it is. + + * "git push" did not pay attention to branch.*.pushremote if it is + defined earlier than remote.pushdefault; the order of these two + variables in the configuration file should not matter, but it did + by mistake. + + * Codepaths that parse timestamps in commit objects have been + tightened. + + * "git diff --external-diff" incorrectly fed the submodule directory + in the working tree to the external diff driver when it knew it is + the same as one of the versions being compared. + + * "git reset" needs to refresh the index when working in a working + tree (it can also be used to match the index to the HEAD in an + otherwise bare repository), but it failed to set up the working + tree properly, causing GIT_WORK_TREE to be ignored. + + * "git check-attr" when working on a repository with a working tree + did not work well when the working tree was specified via the + --work-tree (and obviously with --git-dir) option. + + * "merge-recursive" was broken in 1.7.7 era and stopped working in + an empty (temporary) working tree, when there are renames + involved. This has been corrected. + + * "git rev-parse" was loose in rejecting command line arguments + that do not make sense, e.g. "--default" without the required + value for that option. + + * include.path variable (or any variable that expects a path that + can use ~username expansion) in the configuration file is not a + boolean, but the code failed to check it. + + * "git diff --quiet -- pathspec1 pathspec2" sometimes did not return + correct status value. + + * Attempting to deepen a shallow repository by fetching over smart + HTTP transport failed in the protocol exchange, when no-done + extension was used. The fetching side waited for the list of + shallow boundary commits after the sending end stopped talking to + it. + + * Allow "git cmd path/", when the 'path' is where a submodule is + bound to the top-level working tree, to match 'path', despite the + extra and unnecessary trailing slash (such a slash is often + given by command line completion). diff --git a/Documentation/RelNotes/2.0.0.txt b/Documentation/RelNotes/2.0.0.txt new file mode 100644 index 0000000000..50bbc28e21 --- /dev/null +++ b/Documentation/RelNotes/2.0.0.txt @@ -0,0 +1,271 @@ +Git v2.0 Release Notes +====================== + +Backward compatibility notes +---------------------------- + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default is now the "simple" semantics, +which pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +You can use the configuration variable "push.default" to change +this. If you are an old-timer who wants to keep using the +"matching" semantics, you can set the variable to "matching", for +example. Read the documentation for other possibilities. + +When "git add -u" and "git add -A" are run inside a subdirectory +without specifying which paths to add on the command line, they +operate on the entire tree for consistency with "git commit -a" and +other commands (these commands used to operate only on the current +subdirectory). Say "git add -u ." or "git add -A ." if you want to +limit the operation to the current directory. + +"git add <path>" is the same as "git add -A <path>" now, so that +"git add dir/" will notice paths you removed from the directory and +record the removal. In older versions of Git, "git add <path>" used +to ignore removals. You can say "git add --ignore-removal <path>" to +add only added or modified paths in <path>, if you really want to. + +The "-q" option to "git diff-files", which does *NOT* mean "quiet", +has been removed (it told Git to ignore deletion, which you can do +with "git diff-files --diff-filter=d"). + +"git request-pull" lost a few "heuristics" that often led to mistakes. + + +Updates since v1.9 series +------------------------- + +UI, Workflows & Features + + * "git commit --cleanup=<mode>" learned a new mode, scissors. + + * "git tag --list" output can be sorted using "version sort" with + "--sort=version:refname". + + * Discard the accumulated "heuristics" to guess from which branch the + result wants to be pulled from and make sure what the end user + specified is not second-guessed by "git request-pull", to avoid + mistakes. When you pushed out your 'master' branch to your public + repository as 'for-linus', use the new "master:for-linus" syntax to + denote the branch to be pulled. + + * "git grep" learned to behave in a way similar to native grep when + "-h" (no header) and "-c" (count) options are given. + + * transport-helper, fast-import and fast-export have been updated to + allow the ref mapping and ref deletion in a way similar to the + natively supported transports. + + * The "simple" mode is the default for "git push". + + * "git add -u" and "git add -A", when run without any pathspec, is a + tree-wide operation even when run inside a subdirectory of a + working tree. + + * "git add <path> is the same as "git add -A <path>" now. + + * "core.statinfo" configuration variable, which is a + never-advertised synonym to "core.checkstat", has been removed. + + * The "-q" option to "git diff-files", which does *NOT* mean + "quiet", has been removed (it told Git to ignore deletion, which + you can do with "git diff-files --diff-filter=d"). + + * Server operators can loosen the "tips of refs only" restriction for + the remote archive service with the uploadarchive.allowUnreachable + configuration option. + + * The progress indicators from various time-consuming commands have + been marked for i18n/l10n. + + * "git notes -C <blob>" diagnoses an attempt to use an object that + is not a blob as an error. + + * "git config" learned to read from the standard input when "-" is + given as the value to its "--file" parameter (attempting an + operation to update the configuration in the standard input of + course is rejected). + + * Trailing whitespaces in .gitignore files, unless they are quoted + for fnmatch(3), e.g. "path\ ", are warned and ignored. Strictly + speaking, this is a backward incompatible change, but very unlikely + to bite any sane user and adjusting should be obvious and easy. + + * Many commands that create commits, e.g. "pull", "rebase", + learned to take the --gpg-sign option on the command line. + + * "git commit" can be told to always GPG sign the resulting commit + by setting "commit.gpgsign" configuration variable to true (the + command line option --no-gpg-sign should override it). + + * "git pull" can be told to only accept fast-forward by setting the + new "pull.ff" configuration. + + * "git reset" learned "-N" option, which does not reset the index + fully for paths the index knows about but the tree-ish the command + resets to does not (these paths are kept as intend-to-add entries). + + * Newly cloned submodule repositories by "git submodule update", + when the "checkout" update mode is used, will be on a local + branch instead of on a detached HEAD, just like submodules added + with "git submodule add". + + +Performance, Internal Implementation, etc. + + * We started using wildmatch() in place of fnmatch(3) a few releases + ago; complete the process and stop using fnmatch(3). + + * Uses of curl's "multi" interface and "easy" interface do not mix + well when we attempt to reuse outgoing connections. Teach the RPC + over http code, used in the smart HTTP transport, not to use the + "easy" interface. + + * The bitmap-index feature from JGit has been ported, which should + significantly improve performance when serving objects form a + repository that uses it. + + * The way "git log --cc" shows a combined diff against multiple + parents have been optimized. + + * The prefixcmp() and suffixcmp() functions are gone. Use + starts_with() and ends_with(), and also consider if skip_prefix() + suits your needs better when using the former. + + +Also contains various documentation updates and code clean-ups. Many +of them came from flurry of activities as GSoC candidate microproject +exercises. + + +Fixes since v1.9 series +----------------------- + +Unless otherwise noted, all the fixes since v1.9 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * "git mv" that moves a submodule forgot to adjust the array that + uses to keep track of which submodules were to be moved to update + its configuration. + (merge fb8a4e8 jk/mv-submodules-fix later to maint). + + * Length limit for the pathname used when removing a path in a deep + subdirectory has been removed to avoid buffer overflows. + (merge 2f29e0c mh/remove-subtree-long-pathname-fix later to maint). + + * The test helper lib-terminal always run an actual test_expect_* + when included, which screwed up with the use of skil-all that may + have to be done later. + (merge 7e27173 jk/lib-terminal-lazy later to maint). + + * "git index-pack" used a wrong variable to name the keep-file in an + error message when the file cannot be written or closed. + (merge de983a0 nd/index-pack-error-message later to maint). + + * "rebase -i" produced a broken insn sheet when the title of a commit + happened to contain '\n' (or ended with '\c') due to a careless use + of 'echo'. + (merge cb1aefd us/printf-not-echo later to maint). + + * There were a few instances of 'git-foo' remaining in the + documentation that should have been spelled 'git foo'. + (merge 3c3e6f5 rr/doc-merge-strategies later to maint). + + * Serving objects from a shallow repository needs to write a + new file to hold the temporary shallow boundaries but it was not + cleaned when we exit due to die() or a signal. + (merge 7839632 jk/shallow-update-fix later to maint). + + * When "git stash pop" stops after failing to apply the stash + (e.g. due to conflicting changes), the stash is not dropped. State + that explicitly in the output to let the users know. + (merge 2d4c993 jc/stash-pop-not-popped later to maint). + + * The labels in "git status" output that describe the nature of + conflicts (e.g. "both deleted") were limited to 20 bytes, which was + too short for some l10n (e.g. fr). + (merge c7cb333 jn/wt-status later to maint). + + * "git clean -d pathspec" did not use the given pathspec correctly + and ended up cleaning too much. + (merge 1f2e108 jk/clean-d-pathspec later to maint). + + * "git difftool" misbehaved when the repository is bound to the + working tree with the ".git file" mechanism, where a textual file + ".git" tells us where it is. + (merge fcfec8b da/difftool-git-files later to maint). + + * "git push" did not pay attention to branch.*.pushremote if it is + defined earlier than remote.pushdefault; the order of these two + variables in the configuration file should not matter, but it did + by mistake. + (merge 98b406f jk/remote-pushremote-config-reading later to maint). + + * Codepaths that parse timestamps in commit objects have been + tightened. + (merge 3f419d4 jk/commit-dates-parsing-fix later to maint). + + * "git diff --external-diff" incorrectly fed the submodule directory + in the working tree to the external diff driver when it knew it is + the same as one of the versions being compared. + (merge aba4727 tr/diff-submodule-no-reuse-worktree later to maint). + + * "git reset" needs to refresh the index when working in a working + tree (it can also be used to match the index to the HEAD in an + otherwise bare repository), but it failed to set up the working + tree properly, causing GIT_WORK_TREE to be ignored. + (merge b7756d4 nd/reset-setup-worktree later to maint). + + * "git check-attr" when working on a repository with a working tree + did not work well when the working tree was specified via the + --work-tree (and obviously with --git-dir) option. + (merge cdbf623 jc/check-attr-honor-working-tree later to maint). + + * "merge-recursive" was broken in 1.7.7 era and stopped working in + an empty (temporary) working tree, when there are renames + involved. This has been corrected. + (merge 6e2068a bk/refresh-missing-ok-in-merge-recursive later to maint.) + + * "git rev-parse" was loose in rejecting command line arguments + that do not make sense, e.g. "--default" without the required + value for that option. + (merge a43219f ds/rev-parse-required-args later to maint.) + + * include.path variable (or any variable that expects a path that + can use ~username expansion) in the configuration file is not a + boolean, but the code failed to check it. + (merge 67beb60 jk/config-path-include-fix later to maint.) + + * Commands that take pathspecs on the command line misbehaved when + the pathspec is given as an absolute pathname (which is a + practice not particularly encouraged) that points at a symbolic + link in the working tree. + (merge later 655ee9e mw/symlinks to maint.) + + * "git diff --quiet -- pathspec1 pathspec2" sometimes did not return + correct status value. + (merge f34b205 nd/diff-quiet-stat-dirty later to maint.) + + * Attempting to deepen a shallow repository by fetching over smart + HTTP transport failed in the protocol exchange, when no-done + extension was used. The fetching side waited for the list of + shallow boundary commits after the sending end stopped talking to + it. + (merge 0232852 nd/http-fetch-shallow-fix later to maint.) + + * Allow "git cmd path/", when the 'path' is where a submodule is + bound to the top-level working tree, to match 'path', despite the + extra and unnecessary trailing slash (such a slash is often + given by command line completion). + (merge 2e70c01 nd/submodule-pathspec-ending-with-slash later to maint.) |