diff options
Diffstat (limited to 'Documentation/RelNotes')
| -rw-r--r-- | Documentation/RelNotes/1.9.0.txt | 345 | ||||
| -rw-r--r-- | Documentation/RelNotes/1.9.1.txt | 59 | ||||
| -rw-r--r-- | Documentation/RelNotes/1.9.2.txt | 67 | ||||
| -rw-r--r-- | Documentation/RelNotes/1.9.3.txt | 21 | ||||
| -rw-r--r-- | Documentation/RelNotes/1.9.4.txt | 16 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.0.txt | 364 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.1.txt | 115 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.2.txt | 32 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.3.txt | 17 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.4.txt | 5 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.1.0.txt | 391 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.2.0.txt | 132 |
12 files changed, 1564 insertions, 0 deletions
diff --git a/Documentation/RelNotes/1.9.0.txt b/Documentation/RelNotes/1.9.0.txt new file mode 100644 index 0000000000..752d79127a --- /dev/null +++ b/Documentation/RelNotes/1.9.0.txt @@ -0,0 +1,345 @@ +Git v1.9.0 Release Notes +======================== + +Backward compatibility notes +---------------------------- + +"git submodule foreach $cmd $args" used to treat "$cmd $args" the same +way "ssh" did, concatenating them into a single string and letting the +shell unquote. Careless users who forget to sufficiently quote $args +get their argument split at $IFS whitespaces by the shell, and got +unexpected results due to this. Starting from this release, the +command line is passed directly to the shell, if it has an argument. + +Read-only support for experimental loose-object format, in which users +could optionally choose to write their loose objects for a short +while between v1.4.3 and v1.5.3 era, has been dropped. + +The meanings of the "--tags" option to "git fetch" has changed; the +command fetches tags _in addition to_ what is fetched by the same +command line without the option. + +The way "git push $there $what" interprets the $what part given on the +command line, when it does not have a colon that explicitly tells us +what ref at the $there repository is to be updated, has been enhanced. + +A handful of ancient commands that have long been deprecated are +finally gone (repo-config, tar-tree, lost-found, and peek-remote). + + +Backward compatibility notes (for Git 2.0.0) +-------------------------------------------- + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default will change to the "simple" +semantics, which pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +Use the user preference configuration variable "push.default" to +change this. If you are an old-timer who is used to the "matching" +semantics, you can set the variable to "matching" to keep the +traditional behaviour. If you want to live in the future early, you +can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" (and "git add -A") is run inside a subdirectory and +does not specify which paths to add on the command line, it +will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. There will be no +mechanism to make plain "git add -u" behave like "git add -u .". +Current users of "git add -u" (without a pathspec) should start +training their fingers to explicitly say "git add -u ." +before Git 2.0 comes. A warning is issued when these commands are +run without a pathspec and when you have local changes outside the +current directory, because the behaviour in Git 2.0 will be different +from today's version in such a situation. + +In Git 2.0, "git add <path>" will behave as "git add -A <path>", so +that "git add dir/" will notice paths you removed from the directory +and record the removal. Versions before Git 2.0, including this +release, will keep ignoring removals, but the users who rely on this +behaviour are encouraged to start using "git add --ignore-removal <path>" +now before 2.0 is released. + +The default prefix for "git svn" will change in Git 2.0. For a long +time, "git svn" created its remote-tracking branches directly under +refs/remotes, but it will place them under refs/remotes/origin/ unless +it is told otherwise with its --prefix option. + + +Updates since v1.8.5 +-------------------- + +Foreign interfaces, subsystems and ports. + + * The HTTP transport, when talking GSS-Negotiate, uses "100 + Continue" response to avoid having to rewind and resend a large + payload, which may not be always doable. + + * Various bugfixes to remote-bzr and remote-hg (in contrib/). + + * The build procedure is aware of MirBSD now. + + * Various "git p4", "git svn" and "gitk" updates. + + +UI, Workflows & Features + + * Fetching from a shallowly-cloned repository used to be forbidden, + primarily because the codepaths involved were not carefully vetted + and we did not bother supporting such usage. This release attempts + to allow object transfer out of a shallowly-cloned repository in a + more controlled way (i.e. the receiver becomes a shallow repository + with a truncated history). + + * Just like we give a reasonable default for "less" via the LESS + environment variable, we now specify a reasonable default for "lv" + via the "LV" environment variable when spawning the pager. + + * Two-level configuration variable names in "branch.*" and "remote.*" + hierarchies, whose variables are predominantly three-level, were + not completed by hitting a <TAB> in bash and zsh completions. + + * Fetching a 'frotz' branch with "git fetch", while a 'frotz/nitfol' + remote-tracking branch from an earlier fetch was still there, would + error out, primarily because the command was not told that it is + allowed to lose any information on our side. "git fetch --prune" + now can be used to remove 'frotz/nitfol' to make room for fetching and + storing the 'frotz' remote-tracking branch. + + * "diff.orderfile=<file>" configuration variable can be used to + pretend as if the "-O<file>" option were given from the command + line of "git diff", etc. + + * The negative pathspec syntax allows "git log -- . ':!dir'" to tell + us "I am interested in everything but 'dir' directory". + + * "git difftool" shows how many different paths there are in total, + and how many of them have been shown so far, to indicate progress. + + * "git push origin master" used to push our 'master' branch to update + the 'master' branch at the 'origin' repository. This has been + enhanced to use the same ref mapping "git push origin" would use to + determine what ref at the 'origin' to be updated with our 'master'. + For example, with this configuration + + [remote "origin"] + push = refs/heads/*:refs/review/* + + that would cause "git push origin" to push out our local branches + to corresponding refs under refs/review/ hierarchy at 'origin', + "git push origin master" would update 'refs/review/master' over + there. Alternatively, if push.default is set to 'upstream' and our + 'master' is set to integrate with 'topic' from the 'origin' branch, + running "git push origin" while on our 'master' would update their + 'topic' branch, and running "git push origin master" while on any + of our branches does the same. + + * "gitweb" learned to treat ref hierarchies other than refs/heads as + if they are additional branch namespaces (e.g. refs/changes/ in + Gerrit). + + * "git for-each-ref --format=..." learned a few formatting directives; + e.g. "%(color:red)%(HEAD)%(color:reset) %(refname:short) %(subject)". + + * The command string given to "git submodule foreach" is passed + directly to the shell, without being eval'ed. This is a backward + incompatible change that may break existing users. + + * "git log" and friends learned the "--exclude=<glob>" option, to + allow people to say "list history of all branches except those that + match this pattern" with "git log --exclude='*/*' --branches". + + * "git rev-parse --parseopt" learned a new "--stuck-long" option to + help scripts parse options with an optional parameter. + + * The "--tags" option to "git fetch" no longer tells the command to + fetch _only_ the tags. It instead fetches tags _in addition to_ + what are fetched by the same command line without the option. + + +Performance, Internal Implementation, etc. + + * When parsing a 40-hex string into the object name, the string is + checked to see if it can be interpreted as a ref so that a warning + can be given for ambiguity. The code kicked in even when the + core.warnambiguousrefs is set to false to squelch this warning, in + which case the cycles spent to look at the ref namespace were an + expensive no-op, as the result was discarded without being used. + + * The naming convention of the packfiles has been updated; it used to + be based on the enumeration of names of the objects that are + contained in the pack, but now it also depends on how the packed + result is represented---packing the same set of objects using + different settings (or delta order) would produce a pack with + different name. + + * "git diff --no-index" mode used to unnecessarily attempt to read + the index when there is one. + + * The deprecated parse-options macro OPT_BOOLEAN has been removed; + use OPT_BOOL or OPT_COUNTUP in new code. + + * A few duplicate implementations of prefix/suffix string comparison + functions have been unified to starts_with() and ends_with(). + + * The new PERLLIB_EXTRA makefile variable can be used to specify + additional directories Perl modules (e.g. the ones necessary to run + git-svn) are installed on the platform when building. + + * "git merge-base" learned the "--fork-point" mode, that implements + the same logic used in "git pull --rebase" to find a suitable fork + point out of the reflog entries for the remote-tracking branch the + work has been based on. "git rebase" has the same logic that can be + triggered with the "--fork-point" option. + + * A third-party "receive-pack" (the responder to "git push") can + advertise the "no-thin" capability to tell "git push" not to use + the thin-pack optimization. Our receive-pack has always been + capable of accepting and fattening a thin-pack, and will continue + not to ask "git push" to use a non-thin pack. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v1.8.5 +------------------ + +Unless otherwise noted, all the fixes since v1.8.5 in the maintenance +track are contained in this release (see the maintenance releases' notes +for details). + + * The pathspec matching code, while comparing two trees (e.g. "git + diff A B -- path1 path2") was too aggressive and failed to match + some paths when multiple pathspecs were involved. + + * "git repack --max-pack-size=8g" stopped being parsed correctly when + the command was reimplemented in C. + + * An earlier update in v1.8.4.x to "git rev-list --objects" with + negative ref had a performance regression. + (merge 200abe7 jk/mark-edges-uninteresting later to maint). + + * A recent update to "git send-email" broke platforms where + /etc/ssl/certs/ directory exists but cannot be used as SSL_ca_path + (e.g. Fedora rawhide). + + * A handful of bugs around interpreting $branch@{upstream} notation + and its lookalike, when $branch part has interesting characters, + e.g. "@", and ":", have been fixed. + + * "git clone" would fail to clone from a repository that has a ref + directly under "refs/", e.g. "refs/stash", because different + validation paths do different things on such a refname. Loosen the + client side's validation to allow such a ref. + + * "git log --left-right A...B" lost the "leftness" of commits + reachable from A when A is a tag as a side effect of a recent + bugfix. This is a regression in 1.8.4.x series. + + * documentations to "git pull" hinted there is an "-m" option because + it incorrectly shared the documentation with "git merge". + + * "git diff A B submod" and "git diff A B submod/" ought to have done + the same for a submodule "submod", but didn't. + + * "git clone $origin foo\bar\baz" on Windows failed to create the + leading directories (i.e. a moral-equivalent of "mkdir -p"). + + * "submodule.*.update=checkout", when propagated from .gitmodules to + .git/config, turned into a "submodule.*.update=none", which did not + make much sense. + (merge efa8fd7 fp/submodule-checkout-mode later to maint). + + * The implementation of 'git stash $cmd "stash@{...}"' did not quote + the stash argument properly and left it split at IFS whitespace. + + * The "--[no-]informative-errors" options to "git daemon" were parsed + a bit too loosely, allowing any other string after these option + names. + + * There is no reason to have a hardcoded upper limit for the number of + parents of an octopus merge, created via the graft mechanism, but + there was. + + * The basic test used to leave unnecessary trash directories in the + t/ directory. + (merge 738a8be jk/test-framework-updates later to maint). + + * "git merge-base --octopus" used to leave cleaning up suboptimal + result to the caller, but now it does the clean-up itself. + + * A "gc" process running as a different user should be able to stop a + new "gc" process from starting, but it didn't. + + * An earlier "clean-up" introduced an unnecessary memory leak. + + * "git add -A" (no other arguments) in a totally empty working tree + used to emit an error. + + * "git log --decorate" did not handle a tag pointed by another tag + nicely. + + * When we figure out how many file descriptors to allocate for + keeping packfiles open, a system with non-working getrlimit() could + cause us to die(), but because we make this call only to get a + rough estimate of how many are available and we do not even attempt + to use up all available file descriptors ourselves, it is nicer to + fall back to a reasonable low value rather than dying. + + * read_sha1_file(), that is the workhorse to read the contents given + an object name, honoured object replacements, but there was no + corresponding mechanism to sha1_object_info() that was used to + obtain the metainfo (e.g. type & size) about the object. This led + callers to weird inconsistencies. + (merge 663a856 cc/replace-object-info later to maint). + + * "git cat-file --batch=", an admittedly useless command, did not + behave very well. + + * "git rev-parse <revs> -- <paths>" did not implement the usual + disambiguation rules the commands in the "git log" family used in + the same way. + + * "git mv A B/", when B does not exist as a directory, should error + out, but it didn't. + + * A workaround to an old bug in glibc prior to glibc 2.17 has been + retired; this would remove a side effect of the workaround that + corrupts system error messages in non-C locales. + + * SSL-related options were not passed correctly to underlying socket + layer in "git send-email". + + * "git commit -v" appends the patch to the log message before + editing, and then removes the patch when the editor returned + control. However, the patch was not stripped correctly when the + first modified path was a submodule. + + * "git fetch --depth=0" was a no-op, and was silently ignored. + Diagnose it as an error. + + * Remote repository URLs expressed in scp-style host:path notation are + parsed more carefully (e.g. "foo/bar:baz" is local, "[::1]:/~user" asks + to connect to user's home directory on host at address ::1. + + * "git diff -- ':(icase)makefile'" was unnecessarily rejected at the + command line parser. + + * "git cat-file --batch-check=ok" did not check the existence of + the named object. + + * "git am --abort" sometimes complained about not being able to write + a tree with an 0{40} object in it. + + * Two processes creating loose objects at the same time could have + failed unnecessarily when the name of their new objects started + with the same byte value, due to a race condition. diff --git a/Documentation/RelNotes/1.9.1.txt b/Documentation/RelNotes/1.9.1.txt new file mode 100644 index 0000000000..5b0602053c --- /dev/null +++ b/Documentation/RelNotes/1.9.1.txt @@ -0,0 +1,59 @@ +Git v1.9.1 Release Notes +======================== + +Fixes since v1.9.0 +------------------ + + * "git clean -d pathspec" did not use the given pathspec correctly + and ended up cleaning too much. + + * "git difftool" misbehaved when the repository is bound to the + working tree with the ".git file" mechanism, where a textual file + ".git" tells us where it is. + + * "git push" did not pay attention to branch.*.pushremote if it is + defined earlier than remote.pushdefault; the order of these two + variables in the configuration file should not matter, but it did + by mistake. + + * Codepaths that parse timestamps in commit objects have been + tightened. + + * "git diff --external-diff" incorrectly fed the submodule directory + in the working tree to the external diff driver when it knew it is + the same as one of the versions being compared. + + * "git reset" needs to refresh the index when working in a working + tree (it can also be used to match the index to the HEAD in an + otherwise bare repository), but it failed to set up the working + tree properly, causing GIT_WORK_TREE to be ignored. + + * "git check-attr" when working on a repository with a working tree + did not work well when the working tree was specified via the + --work-tree (and obviously with --git-dir) option. + + * "merge-recursive" was broken in 1.7.7 era and stopped working in + an empty (temporary) working tree, when there are renames + involved. This has been corrected. + + * "git rev-parse" was loose in rejecting command line arguments + that do not make sense, e.g. "--default" without the required + value for that option. + + * include.path variable (or any variable that expects a path that + can use ~username expansion) in the configuration file is not a + boolean, but the code failed to check it. + + * "git diff --quiet -- pathspec1 pathspec2" sometimes did not return + correct status value. + + * Attempting to deepen a shallow repository by fetching over smart + HTTP transport failed in the protocol exchange, when no-done + extension was used. The fetching side waited for the list of + shallow boundary commits after the sending end stopped talking to + it. + + * Allow "git cmd path/", when the 'path' is where a submodule is + bound to the top-level working tree, to match 'path', despite the + extra and unnecessary trailing slash (such a slash is often + given by command line completion). diff --git a/Documentation/RelNotes/1.9.2.txt b/Documentation/RelNotes/1.9.2.txt new file mode 100644 index 0000000000..47a34ca964 --- /dev/null +++ b/Documentation/RelNotes/1.9.2.txt @@ -0,0 +1,67 @@ +Git v1.9.2 Release Notes +======================== + +Fixes since v1.9.1 +------------------ + + * Documentation and in-code comments had many instances of mistaken + use of "nor", which have been corrected. + + * "git fetch --prune", when the right-hand-side of multiple fetch + refspecs overlap (e.g. storing "refs/heads/*" to + "refs/remotes/origin/*", while storing "refs/frotz/*" to + "refs/remotes/origin/fr/*"), aggressively thought that lack of + "refs/heads/fr/otz" on the origin site meant we should remove + "refs/remotes/origin/fr/otz" from us, without checking their + "refs/frotz/otz" first. + + Note that such a configuration is inherently unsafe (think what + should happen when "refs/heads/fr/otz" does appear on the origin + site), but that is not a reason not to be extra careful. + + * "git update-ref --stdin" did not fail a request to create a ref + when the ref already existed. + + * "git diff --no-index -Mq a b" fell into an infinite loop. + + * When it is not necessary to edit a commit log message (e.g. "git + commit -m" is given a message without specifying "-e"), we used to + disable the spawning of the editor by overriding GIT_EDITOR, but + this means all the uses of the editor, other than to edit the + commit log message, are also affected. + + * "git status --porcelain --branch" showed its output with labels + "ahead/behind/gone" translated to the user's locale. + + * "git mv" that moves a submodule forgot to adjust the array that + uses to keep track of which submodules were to be moved to update + its configuration. + + * Length limit for the pathname used when removing a path in a deep + subdirectory has been removed to avoid buffer overflows. + + * The test helper lib-terminal always run an actual test_expect_* + when included, which screwed up with the use of skil-all that may + have to be done later. + + * "git index-pack" used a wrong variable to name the keep-file in an + error message when the file cannot be written or closed. + + * "rebase -i" produced a broken insn sheet when the title of a commit + happened to contain '\n' (or ended with '\c') due to a careless use + of 'echo'. + + * There were a few instances of 'git-foo' remaining in the + documentation that should have been spelled 'git foo'. + + * Serving objects from a shallow repository needs to write a + new file to hold the temporary shallow boundaries but it was not + cleaned when we exit due to die() or a signal. + + * When "git stash pop" stops after failing to apply the stash + (e.g. due to conflicting changes), the stash is not dropped. State + that explicitly in the output to let the users know. + + * The labels in "git status" output that describe the nature of + conflicts (e.g. "both deleted") were limited to 20 bytes, which was + too short for some l10n (e.g. fr). diff --git a/Documentation/RelNotes/1.9.3.txt b/Documentation/RelNotes/1.9.3.txt new file mode 100644 index 0000000000..17b05ca7b5 --- /dev/null +++ b/Documentation/RelNotes/1.9.3.txt @@ -0,0 +1,21 @@ +Git v1.9.3 Release Notes +======================== + +Fixes since v1.9.2 +------------------ + + * "git p4" dealing with changes in binary files were broken by a + change in 1.9 release. + + * The shell prompt script (in contrib/), when using the PROMPT_COMMAND + interface, used an unsafe construct when showing the branch name in + $PS1. + + * "git rebase" used a POSIX shell construct FreeBSD /bin/sh does not + work well with. + + * Some more Unicode codepoints defined in Unicode 6.3 as having + zero width have been taught to our display column counting logic. + + * Some tests used shell constructs that did not work well on + FreeBSD. diff --git a/Documentation/RelNotes/1.9.4.txt b/Documentation/RelNotes/1.9.4.txt new file mode 100644 index 0000000000..e1d1835436 --- /dev/null +++ b/Documentation/RelNotes/1.9.4.txt @@ -0,0 +1,16 @@ +Git v1.9.4 Release Notes +======================== + +Fixes since v1.9.3 +------------------ + + * Commands that take pathspecs on the command line misbehaved when + the pathspec is given as an absolute pathname (which is a + practice not particularly encouraged) that points at a symbolic + link in the working tree. + + * An earlier fix to the shell prompt script (in contrib/) for using + the PROMPT_COMMAND interface did not correctly check if the extra + code path needs to trigger, causing the branch name not to appear + when 'promptvars' option is disabled in bash or PROMPT_SUBST is + unset in zsh. diff --git a/Documentation/RelNotes/2.0.0.txt b/Documentation/RelNotes/2.0.0.txt new file mode 100644 index 0000000000..2617372a0c --- /dev/null +++ b/Documentation/RelNotes/2.0.0.txt @@ -0,0 +1,364 @@ +Git v2.0 Release Notes +====================== + +Backward compatibility notes +---------------------------- + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default is now the "simple" semantics, +which pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +You can use the configuration variable "push.default" to change +this. If you are an old-timer who wants to keep using the +"matching" semantics, you can set the variable to "matching", for +example. Read the documentation for other possibilities. + +When "git add -u" and "git add -A" are run inside a subdirectory +without specifying which paths to add on the command line, they +operate on the entire tree for consistency with "git commit -a" and +other commands (these commands used to operate only on the current +subdirectory). Say "git add -u ." or "git add -A ." if you want to +limit the operation to the current directory. + +"git add <path>" is the same as "git add -A <path>" now, so that +"git add dir/" will notice paths you removed from the directory and +record the removal. In older versions of Git, "git add <path>" used +to ignore removals. You can say "git add --ignore-removal <path>" to +add only added or modified paths in <path>, if you really want to. + +The "-q" option to "git diff-files", which does *NOT* mean "quiet", +has been removed (it told Git to ignore deletion, which you can do +with "git diff-files --diff-filter=d"). + +"git request-pull" lost a few "heuristics" that often led to mistakes. + +The default prefix for "git svn" has changed in Git 2.0. For a long +time, "git svn" created its remote-tracking branches directly under +refs/remotes, but it now places them under refs/remotes/origin/ unless +it is told otherwise with its "--prefix" option. + + +Updates since v1.9 series +------------------------- + +UI, Workflows & Features + + * The "multi-mail" post-receive hook (in contrib/) has been updated + to a more recent version from upstream. + + * The "remote-hg/bzr" remote-helper interfaces (used to be in + contrib/) are no more. They are now maintained separately as + third-party plug-ins in their own repositories. + + * "git gc --aggressive" learned "--depth" option and + "gc.aggressiveDepth" configuration variable to allow use of a less + insane depth than the built-in default value of 250. + + * "git log" learned the "--show-linear-break" option to show where a + single strand-of-pearls is broken in its output. + + * The "rev-parse --parseopt" mechanism used by scripted Porcelains to + parse command-line options and to give help text learned to take + the argv-help (the placeholder string for an option parameter, + e.g. "key-id" in "--gpg-sign=<key-id>"). + + * The pattern to find where the function begins in C/C++ used in + "diff" and "grep -p" has been updated to improve viewing C++ + sources. + + * "git rebase" learned to interpret a lone "-" as "@{-1}", the + branch that we were previously on. + + * "git commit --cleanup=<mode>" learned a new mode, scissors. + + * "git tag --list" output can be sorted using "version sort" with + "--sort=version:refname". + + * Discard the accumulated "heuristics" to guess from which branch the + result wants to be pulled from and make sure that what the end user + specified is not second-guessed by "git request-pull", to avoid + mistakes. When you pushed out your 'master' branch to your public + repository as 'for-linus', use the new "master:for-linus" syntax to + denote the branch to be pulled. + + * "git grep" learned to behave in a way similar to native grep when + "-h" (no header) and "-c" (count) options are given. + + * "git push" via transport-helper interface has been updated to + allow forced ref updates in a way similar to the natively + supported transports. + + * The "simple" mode is the default for "git push". + + * "git add -u" and "git add -A", when run without any pathspec, is a + tree-wide operation even when run inside a subdirectory of a + working tree. + + * "git add <path>" is the same as "git add -A <path>" now. + + * "core.statinfo" configuration variable, which is a + never-advertised synonym to "core.checkstat", has been removed. + + * The "-q" option to "git diff-files", which does *NOT* mean + "quiet", has been removed (it told Git to ignore deletion, which + you can do with "git diff-files --diff-filter=d"). + + * Server operators can loosen the "tips of refs only" restriction for + the remote archive service with the uploadarchive.allowUnreachable + configuration option. + + * The progress indicators from various time-consuming commands have + been marked for i18n/l10n. + + * "git notes -C <blob>" diagnoses as an error an attempt to use an + object that is not a blob. + + * "git config" learned to read from the standard input when "-" is + given as the value to its "--file" parameter (attempting an + operation to update the configuration in the standard input is + rejected, of course). + + * Trailing whitespaces in .gitignore files, unless they are quoted + for fnmatch(3), e.g. "path\ ", are warned and ignored. Strictly + speaking, this is a backward-incompatible change, but very unlikely + to bite any sane user and adjusting should be obvious and easy. + + * Many commands that create commits, e.g. "pull" and "rebase", + learned to take the "--gpg-sign" option on the command line. + + * "git commit" can be told to always GPG sign the resulting commit + by setting the "commit.gpgsign" configuration variable to "true" + (the command-line option "--no-gpg-sign" should override it). + + * "git pull" can be told to only accept fast-forward by setting the + new "pull.ff" configuration variable. + + * "git reset" learned the "-N" option, which does not reset the index + fully for paths the index knows about but the tree-ish the command + resets to does not (these paths are kept as intend-to-add entries). + + +Performance, Internal Implementation, etc. + + * The compilation options to port to AIX and to MSVC have been + updated. + + * We started using wildmatch() in place of fnmatch(3) a few releases + ago; complete the process and stop using fnmatch(3). + + * Uses of curl's "multi" interface and "easy" interface do not mix + well when we attempt to reuse outgoing connections. Teach the RPC + over HTTP code, used in the smart HTTP transport, not to use the + "easy" interface. + + * The bitmap-index feature from JGit has been ported, which should + significantly improve performance when serving objects from a + repository that uses it. + + * The way "git log --cc" shows a combined diff against multiple + parents has been optimized. + + * The prefixcmp() and suffixcmp() functions are gone. Use + starts_with() and ends_with(), and also consider if skip_prefix() + suits your needs better when using the former. + + +Also contains various documentation updates and code clean-ups. Many +of them came from flurry of activities as GSoC candidate microproject +exercises. + + +Fixes since v1.9 series +----------------------- + +Unless otherwise noted, all the fixes since v1.9 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * "git p4" was broken in 1.9 release to deal with changes in binary + files. + (merge 749b668 cl/p4-use-diff-tree later to maint). + + * The shell prompt script (in contrib/), when using the PROMPT_COMMAND + interface, used an unsafe construct when showing the branch name in + $PS1. + (merge 1e4119c8 rh/prompt-pcmode-avoid-eval-on-refname later to maint). + + * "git rebase" used a POSIX shell construct FreeBSD's /bin/sh does not + work well with. + (merge 8cd6596 km/avoid-non-function-return-in-rebase later to maint). + + * zsh prompt (in contrib/) leaked unnecessary error messages. + + * Bash completion (in contrib/) did not complete the refs and remotes + correctly given "git pu<TAB>" when "pu" is aliased to "push". + + * Some more Unicode code points, defined in Unicode 6.3 as having zero + width, have been taught to our display column counting logic. + (merge d813ab9 tb/unicode-6.3-zero-width later to maint). + + * Some tests used shell constructs that did not work well on FreeBSD + (merge ff7a1c6 km/avoid-bs-in-shell-glob later to maint). + (merge 00764ca km/avoid-cp-a later to maint). + + * "git update-ref --stdin" did not fail a request to create a ref + when the ref already existed. + (merge b9d56b5 mh/update-ref-batch-create-fix later to maint). + + * "git diff --no-index -Mq a b" fell into an infinite loop. + (merge ad1c3fb jc/fix-diff-no-index-diff-opt-parse later to maint). + + * "git fetch --prune", when the right-hand side of multiple fetch + refspecs overlap (e.g. storing "refs/heads/*" to + "refs/remotes/origin/*", while storing "refs/frotz/*" to + "refs/remotes/origin/fr/*"), aggressively thought that lack of + "refs/heads/fr/otz" on the origin site meant we should remove + "refs/remotes/origin/fr/otz" from us, without checking their + "refs/frotz/otz" first. + + Note that such a configuration is inherently unsafe (think what + should happen when "refs/heads/fr/otz" does appear on the origin + site), but that is not a reason not to be extra careful. + (merge e6f6371 cn/fetch-prune-overlapping-destination later to maint). + + * "git status --porcelain --branch" showed its output with labels + "ahead/behind/gone" translated to the user's locale. + (merge 7a76c28 mm/status-porcelain-format-i18n-fix later to maint). + + * A stray environment variable $prefix could have leaked into and + affected the behaviour of the "subtree" script (in contrib/). + + * When it is not necessary to edit a commit log message (e.g. "git + commit -m" is given a message without specifying "-e"), we used to + disable the spawning of the editor by overriding GIT_EDITOR, but + this means all the uses of the editor, other than to edit the + commit log message, are also affected. + (merge b549be0 bp/commit-p-editor later to maint). + + * "git mv" that moves a submodule forgot to adjust the array that + uses to keep track of which submodules were to be moved to update + its configuration. + (merge fb8a4e8 jk/mv-submodules-fix later to maint). + + * Length limit for the pathname used when removing a path in a deep + subdirectory has been removed to avoid buffer overflows. + (merge 2f29e0c mh/remove-subtree-long-pathname-fix later to maint). + + * The test helper lib-terminal always run an actual test_expect_* + when included, which screwed up with the use of skil-all that may + have to be done later. + (merge 7e27173 jk/lib-terminal-lazy later to maint). + + * "git index-pack" used a wrong variable to name the keep-file in an + error message when the file cannot be written or closed. + (merge de983a0 nd/index-pack-error-message later to maint). + + * "rebase -i" produced a broken insn sheet when the title of a commit + happened to contain '\n' (or ended with '\c') due to a careless use + of 'echo'. + (merge cb1aefd us/printf-not-echo later to maint). + + * There were a few instances of 'git-foo' remaining in the + documentation that should have been spelled 'git foo'. + (merge 3c3e6f5 rr/doc-merge-strategies later to maint). + + * Serving objects from a shallow repository needs to write a + new file to hold the temporary shallow boundaries, but it was not + cleaned when we exit due to die() or a signal. + (merge 7839632 jk/shallow-update-fix later to maint). + + * When "git stash pop" stops after failing to apply the stash + (e.g. due to conflicting changes), the stash is not dropped. State + that explicitly in the output to let the users know. + (merge 2d4c993 jc/stash-pop-not-popped later to maint). + + * The labels in "git status" output that describe the nature of + conflicts (e.g. "both deleted") were limited to 20 bytes, which was + too short for some l10n (e.g. fr). + (merge c7cb333 jn/wt-status later to maint). + + * "git clean -d pathspec" did not use the given pathspec correctly + and ended up cleaning too much. + (merge 1f2e108 jk/clean-d-pathspec later to maint). + + * "git difftool" misbehaved when the repository is bound to the + working tree with the ".git file" mechanism, where a textual file + ".git" tells us where it is. + (merge fcfec8b da/difftool-git-files later to maint). + + * "git push" did not pay attention to "branch.*.pushremote" if it is + defined earlier than "remote.pushdefault"; the order of these two + variables in the configuration file should not matter, but it did + by mistake. + (merge 98b406f jk/remote-pushremote-config-reading later to maint). + + * Code paths that parse timestamps in commit objects have been + tightened. + (merge f80d1f9 jk/commit-dates-parsing-fix later to maint). + + * "git diff --external-diff" incorrectly fed the submodule directory + in the working tree to the external diff driver when it knew that it + is the same as one of the versions being compared. + (merge aba4727 tr/diff-submodule-no-reuse-worktree later to maint). + + * "git reset" needs to refresh the index when working in a working + tree (it can also be used to match the index to the HEAD in an + otherwise bare repository), but it failed to set up the working + tree properly, causing GIT_WORK_TREE to be ignored. + (merge b7756d4 nd/reset-setup-worktree later to maint). + + * "git check-attr" when working on a repository with a working tree + did not work well when the working tree was specified via the + "--work-tree" (and obviously with "--git-dir") option. + (merge cdbf623 jc/check-attr-honor-working-tree later to maint). + + * "merge-recursive" was broken in 1.7.7 era and stopped working in + an empty (temporary) working tree, when there are renames + involved. This has been corrected. + (merge 6e2068a bk/refresh-missing-ok-in-merge-recursive later to maint.) + + * "git rev-parse" was loose in rejecting command-line arguments + that do not make sense, e.g. "--default" without the required + value for that option. + (merge a43219f ds/rev-parse-required-args later to maint.) + + * "include.path" variable (or any variable that expects a path that + can use ~username expansion) in the configuration file is not a + boolean, but the code failed to check it. + (merge 67beb60 jk/config-path-include-fix later to maint.) + + * Commands that take pathspecs on the command line misbehaved when + the pathspec is given as an absolute pathname (which is a + practice not particularly encouraged) that points at a symbolic + link in the working tree. + (merge 6127ff6 mw/symlinks later to maint.) + + * "git diff --quiet -- pathspec1 pathspec2" sometimes did not return + the correct status value. + (merge f34b205 nd/diff-quiet-stat-dirty later to maint.) + + * Attempting to deepen a shallow repository by fetching over smart + HTTP transport failed in the protocol exchange, when the no-done + extension was used. The fetching side waited for the list of + shallow boundary commits after the sending side stopped talking to + it. + (merge 0232852 nd/http-fetch-shallow-fix later to maint.) + + * Allow "git cmd path/", when the 'path' is where a submodule is + bound to the top-level working tree, to match 'path', despite the + extra and unnecessary trailing slash (such a slash is often + given by command-line completion). + (merge 2e70c01 nd/submodule-pathspec-ending-with-slash later to maint.) + + * Documentation and in-code comments had many instances of mistaken + use of "nor", which have been corrected. + (merge 235e8d5 jl/nor-or-nand-and later to maint). diff --git a/Documentation/RelNotes/2.0.1.txt b/Documentation/RelNotes/2.0.1.txt new file mode 100644 index 0000000000..ce5579db3e --- /dev/null +++ b/Documentation/RelNotes/2.0.1.txt @@ -0,0 +1,115 @@ +Git v2.0.1 Release Notes +======================== + + * We used to unconditionally disable the pager in the pager process + we spawn to feed out output, but that prevented people who want to + run "less" within "less" from doing so. + + * Tools that read diagnostic output in our standard error stream do + not want to see terminal control sequence (e.g. erase-to-eol). + Detect them by checking if the standard error stream is connected + to a tty. + * Reworded the error message given upon a failure to open an existing + loose object file due to e.g. permission issues; it was reported as + the object being corrupt, but that is not quite true. + + * "git log -2master" is a common typo that shows two commits starting + from whichever random branch that is not 'master' that happens to + be checked out currently. + + * The "%<(10,trunc)%s" pretty format specifier in the log family of + commands is used to truncate the string to a given length (e.g. 10 + in the example) with padding to column-align the output, but did + not take into account that number of bytes and number of display + columns are different. + + * The "mailmap.file" configuration option did not support the tilde + expansion (i.e. ~user/path and ~/path). + + * The completion scripts (in contrib/) did not know about quite a few + options that are common between "git merge" and "git pull", and a + couple of options unique to "git merge". + + * "--ignore-space-change" option of "git apply" ignored the spaces + at the beginning of line too aggressively, which is inconsistent + with the option of the same name "diff" and "git diff" have. + + * "git blame" miscounted number of columns needed to show localized + timestamps, resulting in jaggy left-side-edge of the source code + lines in its output. + + * "git blame" assigned the blame to the copy in the working-tree if + the repository is set to core.autocrlf=input and the file used CRLF + line endings. + + * "git commit --allow-empty-message -C $commit" did not work when the + commit did not have any log message. + + * "git diff --find-copies-harder" sometimes pretended as if the mode + bits have changed for paths that are marked with assume-unchanged + bit. + + * "git format-patch" did not enforce the rule that the "--follow" + option from the log/diff family of commands must be used with + exactly one pathspec. + + * "git gc --auto" was recently changed to run in the background to + give control back early to the end-user sitting in front of the + terminal, but it forgot that housekeeping involving reflogs should + be done without other processes competing for accesses to the refs. + + * "git grep -O" to show the lines that hit in the pager did not work + well with case insensitive search. We now spawn "less" with its + "-I" option when it is used as the pager (which is the default). + + * We used to disable threaded "git index-pack" on platforms without + thread-safe pread(); use a different workaround for such + platforms to allow threaded "git index-pack". + + * The error reporting from "git index-pack" has been improved to + distinguish missing objects from type errors. + + * "git mailinfo" used to read beyond the end of header string while + parsing an incoming e-mail message to extract the patch. + + * On a case insensitive filesystem, merge-recursive incorrectly + deleted the file that is to be renamed to a name that is the same + except for case differences. + + * "git pack-objects" unnecessarily copied the previous contents when + extending the hashtable, even though it will populate the table + from scratch anyway. + + * "git rerere forget" did not work well when merge.conflictstyle + was set to a non-default value. + + * "git remote rm" and "git remote prune" can involve removing many + refs at once, which is not a very efficient thing to do when very + many refs exist in the packed-refs file. + + * "git log --exclude=<glob> --all | git shortlog" worked as expected, + but "git shortlog --exclude=<glob> --all", which is supposed to be + identical to the above pipeline, was not accepted at the command + line argument parser level. + + * The autostash mode of "git rebase -i" did not restore the dirty + working tree state if the user aborted the interactive rebase by + emptying the insn sheet. + + * "git show -s" (i.e. show log message only) used to incorrectly emit + an extra blank line after a merge commit. + + * "git status", even though it is a read-only operation, tries to + update the index with refreshed lstat(2) info to optimize future + accesses to the working tree opportunistically, but this could + race with a "read-write" operation that modify the index while it + is running. Detect such a race and avoid overwriting the index. + + * "git status" (and "git commit") behaved as if changes in a modified + submodule are not there if submodule.*.ignore configuration is set, + which was misleading. The configuration is only to unclutter diff + output during the course of development, and should not to hide + changes in the "status" output to cause the users forget to commit + them. + + * The mode to run tests with HTTP server tests disabled was broken. diff --git a/Documentation/RelNotes/2.0.2.txt b/Documentation/RelNotes/2.0.2.txt new file mode 100644 index 0000000000..8e8321b2ef --- /dev/null +++ b/Documentation/RelNotes/2.0.2.txt @@ -0,0 +1,32 @@ +Git v2.0.2 Release Notes +======================== + + * Documentation for "git submodule sync" forgot to say that the subcommand + can take the "--recursive" option. + + * Mishandling of patterns in .gitignore that has trailing SPs quoted + with backslashes (e.g. ones that end with "\ ") have been + corrected. + + * Recent updates to "git repack" started to duplicate objects that + are in packfiles marked with .keep flag into the new packfile by + mistake. + + * "git clone -b brefs/tags/bar" would have mistakenly thought we were + following a single tag, even though it was a name of the branch, + because it incorrectly used strstr(). + + * "%G" (nothing after G) is an invalid pretty format specifier, but + the parser did not notice it as garbage. + + * Code to avoid adding the same alternate object store twice was + subtly broken for a long time, but nobody seems to have noticed. + + * A handful of code paths had to read the commit object more than + once when showing header fields that are usually not parsed. The + internal data structure to keep track of the contents of the commit + object has been updated to reduce the need for this double-reading, + and to allow the caller find the length of the object. + + * During "git rebase --merge", a conflicted patch could not be + skipped with "--skip" if the next one also conflicted. diff --git a/Documentation/RelNotes/2.0.3.txt b/Documentation/RelNotes/2.0.3.txt new file mode 100644 index 0000000000..4047b46bbe --- /dev/null +++ b/Documentation/RelNotes/2.0.3.txt @@ -0,0 +1,17 @@ +Git v2.0.3 Release Notes +======================== + + * An ancient rewrite passed a wrong pointer to a curl library + function in a rarely used code path. + + * "filter-branch" left an empty single-parent commit that results when + all parents of a merge commit gets mapped to the same commit, even + under "--prune-empty". + + * "log --show-signature" incorrectly decided the color to paint a + mergetag that was and was not correctly validated. + + * "log --show-signature" did not pay attention to "--graph" option. + +Also a lot of fixes to the tests and some updates to the docs are +included. diff --git a/Documentation/RelNotes/2.0.4.txt b/Documentation/RelNotes/2.0.4.txt new file mode 100644 index 0000000000..7e340921a2 --- /dev/null +++ b/Documentation/RelNotes/2.0.4.txt @@ -0,0 +1,5 @@ +Git v2.0.4 Release Notes +======================== + + * An earlier update to v2.0.2 broken output from "git diff-tree", + which is fixed in this release. diff --git a/Documentation/RelNotes/2.1.0.txt b/Documentation/RelNotes/2.1.0.txt new file mode 100644 index 0000000000..ae4753728e --- /dev/null +++ b/Documentation/RelNotes/2.1.0.txt @@ -0,0 +1,391 @@ +Git v2.1 Release Notes +====================== + +Backward compatibility notes +---------------------------- + + * The default value we give to the environment variable LESS has been + changed from "FRSX" to "FRX", losing "S" (chop long lines instead + of wrapping). Existing users who prefer not to see line-wrapped + output may want to set + + $ git config core.pager "less -S" + + to restore the traditional behaviour. It is expected that people + find output from most subcommands easier to read with the new + default, except for "blame" which tends to produce really long + lines. To override the new default only for "git blame", you can + do this: + + $ git config pager.blame "less -S" + + * A few disused directories in contrib/ have been retired. + + +Updates since v2.0 +------------------ + +UI, Workflows & Features + + * Since the very beginning of Git, we gave the LESS environment a + default value "FRSX" when we spawn "less" as the pager. "S" (chop + long lines instead of wrapping) has been removed from this default + set of options, because it is more or less a personal taste thing, + as opposed to the others that have good justifications (i.e. "R" is + very much justified because many kinds of output we produce are + colored and "FX" is justified because output we produce is often + shorter than a page). + + * The logic and data used to compute the display width needed for + UTF-8 strings have been updated to match Unicode 7.0 better. + + * HTTP-based transports learned to better propagate the error messages from + the webserver to the client coming over the HTTP transport. + + * The completion script for bash (in contrib/) has been updated to + better handle aliases that define a complex sequence of commands. + + * The "core.preloadindex" configuration variable is enabled by default, + allowing modern platforms to take advantage of their + multiple cores. + + * "git clone" applies the "if cloning from a local disk, physically + copy the repository using hardlinks, unless otherwise told not to with + --no-local" optimization when the url.*.insteadOf mechanism rewrites a + remote-repository "git clone $URL" into a + clone from a local disk. + + * "git commit --date=<date>" option learned more + timestamp formats, including "--date=now". + + * The `core.commentChar` configuration variable is used to specify a + custom comment character (other than the default "#") for + the commit message editor. This can be set to `auto` to attempt to + choose a different character that does not conflict with any that + already starts a line in the message being edited, for cases like + "git commit --amend". + + * "git format-patch" learned --signature-file=<file> to add the contents + of a file as a signature to the mail message it produces. + + * "git grep" learned the grep.fullname configuration variable to force + "--full-name" to be the default. This may cause regressions for + scripted users who do not expect this new behaviour. + + * "git imap-send" learned to ask the credential helper for auth + material. + + * "git log" and friends now understand the value "auto" for the + "log.decorate" configuration variable to enable the "--decorate" + option automatically when the output is sent to tty. + + * "git merge" without an argument, even when there is an upstream + defined for the current branch, refused to run until + merge.defaultToUpstream is set to true. Flip the default of that + configuration variable to true. + + * "git mergetool" learned to drive the vimdiff3 backend. + + * mergetool.prompt used to default to 'true', always asking "do you + really want to run the tool on this path?". The default has been + changed to 'false'. However, the prompt will still appear if + mergetool used its autodetection system to guess which tool to use. + Users who explicitly specify or configure a tool will no longer see + the prompt by default. + + Strictly speaking, this is a backward incompatible change and + users need to explicitly set the variable to 'true' if they want + to be prompted to confirm running the tool on each path. + + * "git replace" learned the "--edit" subcommand to create a + replacement by editing an existing object. + + * "git replace" learned a "--graft" option to rewrite the parents of a + commit. + + * "git send-email" learned "--to-cover" and "--cc-cover" options, to + tell it to copy To: and Cc: headers found in the first input file + when emitting later input files. + + * "git svn" learned to cope with malformed timestamps with only one + digit in the hour part, e.g. 2014-01-07T5:01:02.048176Z, emitted + by some broken subversion server implementations. + + * "git tag" when editing the tag message shows the name of the tag + being edited as a comment in the editor. + + * "git tag" learned to pay attention to "tag.sort" configuration, to + be used as the default sort order when no --sort=<value> option + is given. + + * A new "git verify-commit" command, to check GPG signatures in signed + commits, in a way similar to "git verify-tag" is used to check + signed tags, was added. + + +Performance, Internal Implementation, etc. + + * Build procedure for 'subtree' (in contrib/) has been cleaned up. + + * Support for the profile-feedback build, which has + bit-rotted for quite a while, has been updated. + + * An experimental format to use two files (the base file and + incremental changes relative to it) to represent the index has been + introduced; this may reduce I/O cost of rewriting a large index + when only small part of the working tree changes. + + * Effort to shrink the size of patches Windows folks maintain on top + by upstreaming them continues. More tests that are not applicable + to the Windows environment are identified and either skipped or + made more portable. + + * Eradication of "test $condition -a $condition" from our scripts + continues. + + * The `core.deltabasecachelimit` used to default to 16 MiB , but this + proved to be too small, and has been bumped to 96 MiB. + + * "git blame" has been optimized greatly by reorganising the data + structure that is used to keep track of the work to be done. + + * "git diff" that compares 3-or-more trees (e.g. parents and the + result of a merge) has been optimized. + + * The API to update/delete references are being converted to handle + updates to multiple references in a transactional way. As an + example, "update-ref --stdin [-z]" has been updated to use this + API. + + * skip_prefix() and strip_suffix() API functions are used a lot more + widely throughout the codebase now. + + * Parts of the test scripts can be skipped by using a range notation, + e.g. "sh t1234-test.sh --run='1-4 6 8-'" to omit test piece 5 and 7 + and run everything else. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.0 +---------------- + +Unless otherwise noted, all the fixes since v2.0 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * We used to unconditionally disable the pager in the pager process + we spawn to feed out output, but that prevented people who want to + run "less" within "less" from doing so. + (merge c0459ca je/pager-do-not-recurse later to maint). + + * Tools that read diagnostic output in our standard error stream do + not want to see terminal control sequence (e.g. erase-to-eol). + Detect them by checking if the standard error stream is connected + to a tty. + (merge 38de156 mn/sideband-no-ansi later to maint). + + * Mishandling of patterns in .gitignore that have trailing SPs quoted + with backslashes (e.g. ones that end with "\ ") has been + corrected. + (merge 97c1364be6b pb/trim-trailing-spaces later to maint). + + * Reworded the error message given upon a failure to open an existing + loose object file due to e.g. permission issues; it was reported as + the object being corrupt, but that is not quite true. + (merge d6c8a05 jk/report-fail-to-read-objects-better later to maint). + + * "git log -2master" is a common typo that shows two commits starting + from whichever random branch that is not 'master' that happens to + be checked out currently. + (merge e3fa568 jc/revision-dash-count-parsing later to maint). + + * Code to avoid adding the same alternate object store twice was + subtly broken for a long time, but nobody seems to have noticed. + (merge 80b4785 rs/fix-alt-odb-path-comparison later to maint). + (merge 539e750 ek/alt-odb-entry-fix later to maint). + + * The "%<(10,trunc)%s" pretty format specifier in the log family of + commands is used to truncate the string to a given length (e.g. 10 + in the example) with padding to column-align the output, but did + not take into account that number of bytes and number of display + columns are different. + (merge 7d50987 as/pretty-truncate later to maint). + + * "%G" (nothing after G) is an invalid pretty format specifier, but + the parser did not notice it as garbage. + (merge 958b2eb jk/pretty-G-format-fixes later to maint). + + * A handful of code paths had to read the commit object more than + once when showing header fields that are usually not parsed. The + internal data structure to keep track of the contents of the commit + object has been updated to reduce the need for this double-reading, + and to allow the caller find the length of the object. + (merge 218aa3a jk/commit-buffer-length later to maint). + + * The "mailmap.file" configuration option did not support tilde + expansion (i.e. ~user/path and ~/path). + (merge 9352fd5 ow/config-mailmap-pathname later to maint). + + * The completion scripts (in contrib/) did not know about quite a few + options that are common between "git merge" and "git pull", and a + couple of options unique to "git merge". + (merge 8fee872 jk/complete-merge-pull later to maint). + + * The unix-domain socket used by the sample credential cache daemon + tried to unlink an existing stale one at a wrong path, if the path + to the socket was given as an overlong path that does not fit in + the sun_path member of the sockaddr_un structure. + (merge 2869b3e rs/fix-unlink-unix-socket later to maint). + + * An ancient rewrite passed a wrong pointer to a curl library + function in a rarely used code path. + (merge 479eaa8 ah/fix-http-push later to maint). + + * "--ignore-space-change" option of "git apply" ignored the spaces + at the beginning of lines too aggressively, which is inconsistent + with the option of the same name that "diff" and "git diff" have. + (merge 14d3bb4 jc/apply-ignore-whitespace later to maint). + + * "git blame" miscounted the number of columns needed to show localized + timestamps, resulting in a jaggy left-side-edge for the source code + lines in its output. + (merge dd75553 jx/blame-align-relative-time later to maint). + + * "git blame" assigned the blame to the copy in the working-tree if + the repository is set to core.autocrlf=input and the file used CRLF + line endings. + (merge 4d4813a bc/blame-crlf-test later to maint). + + * "git clone -b brefs/tags/bar" would have mistakenly thought we were + following a single tag, even though it was a name of the branch, + because it incorrectly used strstr(). + (merge 60a5f5f jc/fix-clone-single-starting-at-a-tag later to maint). + + * "git commit --allow-empty-message -C $commit" did not work when the + commit did not have any log message. + (merge 076cbd6 jk/commit-C-pick-empty later to maint). + + * "git diff --find-copies-harder" sometimes pretended as if the mode + bits have changed for paths that are marked with the assume-unchanged + bit. + (merge 5304810 jk/diff-files-assume-unchanged later to maint). + + * "filter-branch" left an empty single-parent commit that results when + all parents of a merge commit get mapped to the same commit, even + under "--prune-empty". + (merge 79bc4ef cb/filter-branch-prune-empty-degenerate-merges later to maint). + + * "git format-patch" did not enforce the rule that the "--follow" + option from the log/diff family of commands must be used with + exactly one pathspec. + (merge dd63f16 jk/diff-follow-must-take-one-pathspec later to maint). + + * "git gc --auto" was recently changed to run in the background to + give control back early to the end-user sitting in front of the + terminal, but it forgot that housekeeping involving reflogs should + be done without other processes competing for accesses to the refs. + (merge 62aad18 nd/daemonize-gc later to maint). + + * "git grep -O" to show the lines that hit in the pager did not work + well with case insensitive search. We now spawn "less" with its + "-I" option when it is used as the pager (which is the default). + (merge f7febbe sk/spawn-less-case-insensitively-from-grep-O-i later to maint). + + * We used to disable threaded "git index-pack" on platforms without + thread-safe pread(); use a different workaround for such + platforms to allow threaded "git index-pack". + (merge 3953949 nd/index-pack-one-fd-per-thread later to maint). + + * The error reporting from "git index-pack" has been improved to + distinguish missing objects from type errors. + (merge 77583e7 jk/index-pack-report-missing later to maint). + + * "log --show-signature" incorrectly decided the color to paint a + mergetag that was and was not correctly validated. + (merge 42c55ce mg/fix-log-mergetag-color later to maint). + + * "log --show-signature" did not pay attention to the "--graph" option. + (merge cf3983d zk/log-graph-showsig later to maint). + + * "git mailinfo" used to read beyond the ends of header strings while + parsing an incoming e-mail message to extract the patch. + (merge b1a013d rs/mailinfo-header-cmp later to maint). + + * On a case insensitive filesystem, merge-recursive incorrectly + deleted the file that is to be renamed to a name that is the same + except for case differences. + (merge baa37bf dt/merge-recursive-case-insensitive later to maint). + + * Merging changes into a file that ends in an incomplete line made the + last line into a complete one, even when the other branch did not + change anything around the end of file. + (merge ba31180 mk/merge-incomplete-files later to maint). + + * "git pack-objects" unnecessarily copied the previous contents when + extending the hashtable, even though it will populate the table + from scratch anyway. + (merge fb79947 rs/pack-objects-no-unnecessary-realloc later to maint). + + * Recent updates to "git repack" started to duplicate objects that + are in packfiles marked with the .keep flag into the new packfile by + mistake. + (merge d078d85 jk/repack-pack-keep-objects later to maint). + + * "git rerere forget" did not work well when merge.conflictstyle + was set to a non-default value. + (merge de3d8bb fc/rerere-conflict-style later to maint). + + * "git remote rm" and "git remote prune" can involve removing many + refs at once, which is not a very efficient thing to do when very + many refs exist in the packed-refs file. + (merge e6bea66 jl/remote-rm-prune later to maint). + + * "git log --exclude=<glob> --all | git shortlog" worked as expected, + but "git shortlog --exclude=<glob> --all", which is supposed to be + identical to the above pipeline, was not accepted at the command + line argument parser level. + (merge eb07774 jc/shortlog-ref-exclude later to maint). + + * The autostash mode of "git rebase -i" did not restore the dirty + working tree state if the user aborted the interactive rebase by + emptying the insn sheet. + (merge ddb5432 rr/rebase-autostash-fix later to maint). + + * "git rebase --fork-point" did not filter out patch-identical + commits correctly. + + * During "git rebase --merge", a conflicted patch could not be + skipped with "--skip" if the next one also conflicted. + (merge 95104c7 bc/fix-rebase-merge-skip later to maint). + + * "git show -s" (i.e. show log message only) used to incorrectly emit + an extra blank line after a merge commit. + (merge ad2f725 mk/show-s-no-extra-blank-line-for-merges later to maint). + + * "git status", even though it is a read-only operation, tries to + update the index with refreshed lstat(2) info to optimize future + accesses to the working tree opportunistically, but this could + race with a "read-write" operation that modifies the index while it + is running. Detect such a race and avoid overwriting the index. + (merge 426ddee ym/fix-opportunistic-index-update-race later to maint). + + * "git status" (and "git commit") behaved as if changes in a modified + submodule are not there if submodule.*.ignore configuration is set, + which was misleading. The configuration is only to unclutter diff + output during the course of development, and not to hide + changes in the "status" output to cause the users forget to commit + them. + (merge c215d3d jl/status-added-submodule-is-never-ignored later to maint). + + * Documentation for "git submodule sync" forgot to say that the subcommand + can take the "--recursive" option. + (merge 9393ae7 mc/doc-submodule-sync-recurse later to maint). + + * "git update-index --cacheinfo" in 2.0 release crashed on a + malformed command line. + (merge c8e1ee4 jc/rev-parse-argh-dashed-multi-words later to maint). + + * The mode to run tests with HTTP server tests disabled was broken. + (merge afa53fe na/no-http-test-in-the-middle later to maint). diff --git a/Documentation/RelNotes/2.2.0.txt b/Documentation/RelNotes/2.2.0.txt new file mode 100644 index 0000000000..22b73618fc --- /dev/null +++ b/Documentation/RelNotes/2.2.0.txt @@ -0,0 +1,132 @@ +Git v2.2 Release Notes +====================== + +Updates since v2.1 +------------------ + +Ports + + * Building on older MacOS X systems automatically sets + the necessary NO_APPLE_COMMON_CRYPTO build-time option. + + +UI, Workflows & Features + + * "git config --edit --global" starts from a skeletal per-user + configuration file contents, instead of a total blank, when the + user does not already have any. This immediately reduces the + need for a later "Have you forgotten setting core.user?" and we + can add more to the template as we gain more experience. + + * "git stash list -p" used to be almost always a no-op because each + stash entry is represented as a merge commit. It learned to show + the difference between the base commit version and the working tree + version, which is in line with what "git show" gives. + +Performance, Internal Implementation, etc. + + * The API to manipulate the "refs" is currently undergoing a revamp + to make it more transactional, with the eventual goal to allow + all-or-none atomic updates and migrating the storage to something + other than the traditional filesystem based one (e.g. databases). + + * We no longer attempt to keep track of individual dependencies to + the header files in the build procedure, relying on automated + dependency generation support from modern compilers. + + * In tests, we have been using NOT_{MINGW,CYGWIN} test prerequisites + long before negated prerequisites e.g. !MINGW were invented. + The former has been converted to the latter to avoid confusion. + + * Looking up remotes configuration in a repository with very many + remotes defined has been optimized. + + * There are cases where you lock and open to write a file, close it + to show the updated contents to external processes, and then have + to update the file again while still holding the lock, but the + lockfile API lacked support for such an access pattern. + + * The API to allocate the structure to keep track of commit + decoration has been updated to make it less cumbersome to use. + + * An in-core caching layer to let us avoid reading the same + configuration files number of times has been added. A few commands + have been converted to use this subsystem. + + * Various code paths have been cleaned up and simplified by using + "strbuf", "starts_with()", and "skip_prefix()" APIs more. + + * A few codepaths that died when large blobs that would not fit in + core are involved in their operation have been taught to punt + instead, by e.g. marking too large a blob as not to be diffed. + + * A few more code paths in "commit" and "checkout" have been taught + to repopulate the cache-tree in the index, to help speed up later + "write-tree" (used in "commit") and "diff-index --cached" (used in + "status"). + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.1 +---------------- + +Unless otherwise noted, all the fixes since v2.1 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * "git log --pretty/format=" with an empty format string did not + mean the more obvious "No output whatsoever" but "Use default + format", which was counterintuitive. + (merge b9c7d6e jk/pretty-empty-format later to maint). + + * Implementations of "tar" that do not understand an extended pax + header would extract the contents of it in a regular file; make + sure the permission bits of this file follows the same tar.umask + configuration setting. + + * "git -c section.var command" and "git -c section.var= command" + should pass the configuration differently (the former should be a + boolean true, the latter should be an empty string). + (merge a789ca7 jk/command-line-config-empty-string later to maint). + + * Applying a patch not generated by Git in a subdirectory used to + check the whitespace breakage using the attributes for incorrect + paths. Also whitespace checks were performed even for paths + excluded via "git apply --exclude=<path>" mechanism. + (merge 477a08a jc/apply-ws-prefix later to maint). + + * "git bundle create" with date-range specification were meant to + exclude tags outside the range, but it didn't. + (merge 2c8544a lf/bundle-exclusion later to maint). + + * "git add x" where x that used to be a directory has become a + symbolic link to a directory misbehaved. + (merge ccad42d rs/refresh-beyond-symlink later to maint). + + * The prompt script checked $GIT_DIR/ref/stash file to see if there + is a stash, which was a no-no. + (merge 0fa7f01 jk/prompt-stash-could-be-packed later to maint). + + * Pack-protocol documentation had a minor typo. + (merge 5d146f7 sp/pack-protocol-doc-on-shallow later to maint). + + * "git checkout -m" did not switch to another branch while carrying + the local changes forward when a path was deleted from the index. + (merge 6a143aa jn/unpack-trees-checkout-m-carry-deletion later to maint). + + * With sufficiently long refnames, "git fast-import" could have + overflown an on-stack buffer. + (merge c252785 jk/fast-import-fixes later to maint). + + * After "pack-refs --prune" packed refs at the top-level, it failed + to prune them. + (merge afd11d3 jk/prune-top-level-refs-after-packing later to maint). + + * Progress output from "git gc --auto" was visible in "git fetch -q". + (merge 6fceed3 nd/fetch-pass-quiet-to-gc-child-process later to maint). + + * We used to pass -1000 to poll(2), expecting it to also mean "no + timeout", which should be spelled as -1. + (merge 6c71f8b et/spell-poll-infinite-with-minus-one-only later to maint). |