diff options
Diffstat (limited to 'Documentation/RelNotes')
| -rw-r--r-- | Documentation/RelNotes/2.0.0.txt | 364 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.1.txt | 115 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.2.txt | 32 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.3.txt | 17 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.4.txt | 5 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.0.5.txt | 34 |
6 files changed, 567 insertions, 0 deletions
diff --git a/Documentation/RelNotes/2.0.0.txt b/Documentation/RelNotes/2.0.0.txt new file mode 100644 index 0000000000..2617372a0c --- /dev/null +++ b/Documentation/RelNotes/2.0.0.txt @@ -0,0 +1,364 @@ +Git v2.0 Release Notes +====================== + +Backward compatibility notes +---------------------------- + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default is now the "simple" semantics, +which pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +You can use the configuration variable "push.default" to change +this. If you are an old-timer who wants to keep using the +"matching" semantics, you can set the variable to "matching", for +example. Read the documentation for other possibilities. + +When "git add -u" and "git add -A" are run inside a subdirectory +without specifying which paths to add on the command line, they +operate on the entire tree for consistency with "git commit -a" and +other commands (these commands used to operate only on the current +subdirectory). Say "git add -u ." or "git add -A ." if you want to +limit the operation to the current directory. + +"git add <path>" is the same as "git add -A <path>" now, so that +"git add dir/" will notice paths you removed from the directory and +record the removal. In older versions of Git, "git add <path>" used +to ignore removals. You can say "git add --ignore-removal <path>" to +add only added or modified paths in <path>, if you really want to. + +The "-q" option to "git diff-files", which does *NOT* mean "quiet", +has been removed (it told Git to ignore deletion, which you can do +with "git diff-files --diff-filter=d"). + +"git request-pull" lost a few "heuristics" that often led to mistakes. + +The default prefix for "git svn" has changed in Git 2.0. For a long +time, "git svn" created its remote-tracking branches directly under +refs/remotes, but it now places them under refs/remotes/origin/ unless +it is told otherwise with its "--prefix" option. + + +Updates since v1.9 series +------------------------- + +UI, Workflows & Features + + * The "multi-mail" post-receive hook (in contrib/) has been updated + to a more recent version from upstream. + + * The "remote-hg/bzr" remote-helper interfaces (used to be in + contrib/) are no more. They are now maintained separately as + third-party plug-ins in their own repositories. + + * "git gc --aggressive" learned "--depth" option and + "gc.aggressiveDepth" configuration variable to allow use of a less + insane depth than the built-in default value of 250. + + * "git log" learned the "--show-linear-break" option to show where a + single strand-of-pearls is broken in its output. + + * The "rev-parse --parseopt" mechanism used by scripted Porcelains to + parse command-line options and to give help text learned to take + the argv-help (the placeholder string for an option parameter, + e.g. "key-id" in "--gpg-sign=<key-id>"). + + * The pattern to find where the function begins in C/C++ used in + "diff" and "grep -p" has been updated to improve viewing C++ + sources. + + * "git rebase" learned to interpret a lone "-" as "@{-1}", the + branch that we were previously on. + + * "git commit --cleanup=<mode>" learned a new mode, scissors. + + * "git tag --list" output can be sorted using "version sort" with + "--sort=version:refname". + + * Discard the accumulated "heuristics" to guess from which branch the + result wants to be pulled from and make sure that what the end user + specified is not second-guessed by "git request-pull", to avoid + mistakes. When you pushed out your 'master' branch to your public + repository as 'for-linus', use the new "master:for-linus" syntax to + denote the branch to be pulled. + + * "git grep" learned to behave in a way similar to native grep when + "-h" (no header) and "-c" (count) options are given. + + * "git push" via transport-helper interface has been updated to + allow forced ref updates in a way similar to the natively + supported transports. + + * The "simple" mode is the default for "git push". + + * "git add -u" and "git add -A", when run without any pathspec, is a + tree-wide operation even when run inside a subdirectory of a + working tree. + + * "git add <path>" is the same as "git add -A <path>" now. + + * "core.statinfo" configuration variable, which is a + never-advertised synonym to "core.checkstat", has been removed. + + * The "-q" option to "git diff-files", which does *NOT* mean + "quiet", has been removed (it told Git to ignore deletion, which + you can do with "git diff-files --diff-filter=d"). + + * Server operators can loosen the "tips of refs only" restriction for + the remote archive service with the uploadarchive.allowUnreachable + configuration option. + + * The progress indicators from various time-consuming commands have + been marked for i18n/l10n. + + * "git notes -C <blob>" diagnoses as an error an attempt to use an + object that is not a blob. + + * "git config" learned to read from the standard input when "-" is + given as the value to its "--file" parameter (attempting an + operation to update the configuration in the standard input is + rejected, of course). + + * Trailing whitespaces in .gitignore files, unless they are quoted + for fnmatch(3), e.g. "path\ ", are warned and ignored. Strictly + speaking, this is a backward-incompatible change, but very unlikely + to bite any sane user and adjusting should be obvious and easy. + + * Many commands that create commits, e.g. "pull" and "rebase", + learned to take the "--gpg-sign" option on the command line. + + * "git commit" can be told to always GPG sign the resulting commit + by setting the "commit.gpgsign" configuration variable to "true" + (the command-line option "--no-gpg-sign" should override it). + + * "git pull" can be told to only accept fast-forward by setting the + new "pull.ff" configuration variable. + + * "git reset" learned the "-N" option, which does not reset the index + fully for paths the index knows about but the tree-ish the command + resets to does not (these paths are kept as intend-to-add entries). + + +Performance, Internal Implementation, etc. + + * The compilation options to port to AIX and to MSVC have been + updated. + + * We started using wildmatch() in place of fnmatch(3) a few releases + ago; complete the process and stop using fnmatch(3). + + * Uses of curl's "multi" interface and "easy" interface do not mix + well when we attempt to reuse outgoing connections. Teach the RPC + over HTTP code, used in the smart HTTP transport, not to use the + "easy" interface. + + * The bitmap-index feature from JGit has been ported, which should + significantly improve performance when serving objects from a + repository that uses it. + + * The way "git log --cc" shows a combined diff against multiple + parents has been optimized. + + * The prefixcmp() and suffixcmp() functions are gone. Use + starts_with() and ends_with(), and also consider if skip_prefix() + suits your needs better when using the former. + + +Also contains various documentation updates and code clean-ups. Many +of them came from flurry of activities as GSoC candidate microproject +exercises. + + +Fixes since v1.9 series +----------------------- + +Unless otherwise noted, all the fixes since v1.9 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * "git p4" was broken in 1.9 release to deal with changes in binary + files. + (merge 749b668 cl/p4-use-diff-tree later to maint). + + * The shell prompt script (in contrib/), when using the PROMPT_COMMAND + interface, used an unsafe construct when showing the branch name in + $PS1. + (merge 1e4119c8 rh/prompt-pcmode-avoid-eval-on-refname later to maint). + + * "git rebase" used a POSIX shell construct FreeBSD's /bin/sh does not + work well with. + (merge 8cd6596 km/avoid-non-function-return-in-rebase later to maint). + + * zsh prompt (in contrib/) leaked unnecessary error messages. + + * Bash completion (in contrib/) did not complete the refs and remotes + correctly given "git pu<TAB>" when "pu" is aliased to "push". + + * Some more Unicode code points, defined in Unicode 6.3 as having zero + width, have been taught to our display column counting logic. + (merge d813ab9 tb/unicode-6.3-zero-width later to maint). + + * Some tests used shell constructs that did not work well on FreeBSD + (merge ff7a1c6 km/avoid-bs-in-shell-glob later to maint). + (merge 00764ca km/avoid-cp-a later to maint). + + * "git update-ref --stdin" did not fail a request to create a ref + when the ref already existed. + (merge b9d56b5 mh/update-ref-batch-create-fix later to maint). + + * "git diff --no-index -Mq a b" fell into an infinite loop. + (merge ad1c3fb jc/fix-diff-no-index-diff-opt-parse later to maint). + + * "git fetch --prune", when the right-hand side of multiple fetch + refspecs overlap (e.g. storing "refs/heads/*" to + "refs/remotes/origin/*", while storing "refs/frotz/*" to + "refs/remotes/origin/fr/*"), aggressively thought that lack of + "refs/heads/fr/otz" on the origin site meant we should remove + "refs/remotes/origin/fr/otz" from us, without checking their + "refs/frotz/otz" first. + + Note that such a configuration is inherently unsafe (think what + should happen when "refs/heads/fr/otz" does appear on the origin + site), but that is not a reason not to be extra careful. + (merge e6f6371 cn/fetch-prune-overlapping-destination later to maint). + + * "git status --porcelain --branch" showed its output with labels + "ahead/behind/gone" translated to the user's locale. + (merge 7a76c28 mm/status-porcelain-format-i18n-fix later to maint). + + * A stray environment variable $prefix could have leaked into and + affected the behaviour of the "subtree" script (in contrib/). + + * When it is not necessary to edit a commit log message (e.g. "git + commit -m" is given a message without specifying "-e"), we used to + disable the spawning of the editor by overriding GIT_EDITOR, but + this means all the uses of the editor, other than to edit the + commit log message, are also affected. + (merge b549be0 bp/commit-p-editor later to maint). + + * "git mv" that moves a submodule forgot to adjust the array that + uses to keep track of which submodules were to be moved to update + its configuration. + (merge fb8a4e8 jk/mv-submodules-fix later to maint). + + * Length limit for the pathname used when removing a path in a deep + subdirectory has been removed to avoid buffer overflows. + (merge 2f29e0c mh/remove-subtree-long-pathname-fix later to maint). + + * The test helper lib-terminal always run an actual test_expect_* + when included, which screwed up with the use of skil-all that may + have to be done later. + (merge 7e27173 jk/lib-terminal-lazy later to maint). + + * "git index-pack" used a wrong variable to name the keep-file in an + error message when the file cannot be written or closed. + (merge de983a0 nd/index-pack-error-message later to maint). + + * "rebase -i" produced a broken insn sheet when the title of a commit + happened to contain '\n' (or ended with '\c') due to a careless use + of 'echo'. + (merge cb1aefd us/printf-not-echo later to maint). + + * There were a few instances of 'git-foo' remaining in the + documentation that should have been spelled 'git foo'. + (merge 3c3e6f5 rr/doc-merge-strategies later to maint). + + * Serving objects from a shallow repository needs to write a + new file to hold the temporary shallow boundaries, but it was not + cleaned when we exit due to die() or a signal. + (merge 7839632 jk/shallow-update-fix later to maint). + + * When "git stash pop" stops after failing to apply the stash + (e.g. due to conflicting changes), the stash is not dropped. State + that explicitly in the output to let the users know. + (merge 2d4c993 jc/stash-pop-not-popped later to maint). + + * The labels in "git status" output that describe the nature of + conflicts (e.g. "both deleted") were limited to 20 bytes, which was + too short for some l10n (e.g. fr). + (merge c7cb333 jn/wt-status later to maint). + + * "git clean -d pathspec" did not use the given pathspec correctly + and ended up cleaning too much. + (merge 1f2e108 jk/clean-d-pathspec later to maint). + + * "git difftool" misbehaved when the repository is bound to the + working tree with the ".git file" mechanism, where a textual file + ".git" tells us where it is. + (merge fcfec8b da/difftool-git-files later to maint). + + * "git push" did not pay attention to "branch.*.pushremote" if it is + defined earlier than "remote.pushdefault"; the order of these two + variables in the configuration file should not matter, but it did + by mistake. + (merge 98b406f jk/remote-pushremote-config-reading later to maint). + + * Code paths that parse timestamps in commit objects have been + tightened. + (merge f80d1f9 jk/commit-dates-parsing-fix later to maint). + + * "git diff --external-diff" incorrectly fed the submodule directory + in the working tree to the external diff driver when it knew that it + is the same as one of the versions being compared. + (merge aba4727 tr/diff-submodule-no-reuse-worktree later to maint). + + * "git reset" needs to refresh the index when working in a working + tree (it can also be used to match the index to the HEAD in an + otherwise bare repository), but it failed to set up the working + tree properly, causing GIT_WORK_TREE to be ignored. + (merge b7756d4 nd/reset-setup-worktree later to maint). + + * "git check-attr" when working on a repository with a working tree + did not work well when the working tree was specified via the + "--work-tree" (and obviously with "--git-dir") option. + (merge cdbf623 jc/check-attr-honor-working-tree later to maint). + + * "merge-recursive" was broken in 1.7.7 era and stopped working in + an empty (temporary) working tree, when there are renames + involved. This has been corrected. + (merge 6e2068a bk/refresh-missing-ok-in-merge-recursive later to maint.) + + * "git rev-parse" was loose in rejecting command-line arguments + that do not make sense, e.g. "--default" without the required + value for that option. + (merge a43219f ds/rev-parse-required-args later to maint.) + + * "include.path" variable (or any variable that expects a path that + can use ~username expansion) in the configuration file is not a + boolean, but the code failed to check it. + (merge 67beb60 jk/config-path-include-fix later to maint.) + + * Commands that take pathspecs on the command line misbehaved when + the pathspec is given as an absolute pathname (which is a + practice not particularly encouraged) that points at a symbolic + link in the working tree. + (merge 6127ff6 mw/symlinks later to maint.) + + * "git diff --quiet -- pathspec1 pathspec2" sometimes did not return + the correct status value. + (merge f34b205 nd/diff-quiet-stat-dirty later to maint.) + + * Attempting to deepen a shallow repository by fetching over smart + HTTP transport failed in the protocol exchange, when the no-done + extension was used. The fetching side waited for the list of + shallow boundary commits after the sending side stopped talking to + it. + (merge 0232852 nd/http-fetch-shallow-fix later to maint.) + + * Allow "git cmd path/", when the 'path' is where a submodule is + bound to the top-level working tree, to match 'path', despite the + extra and unnecessary trailing slash (such a slash is often + given by command-line completion). + (merge 2e70c01 nd/submodule-pathspec-ending-with-slash later to maint.) + + * Documentation and in-code comments had many instances of mistaken + use of "nor", which have been corrected. + (merge 235e8d5 jl/nor-or-nand-and later to maint). diff --git a/Documentation/RelNotes/2.0.1.txt b/Documentation/RelNotes/2.0.1.txt new file mode 100644 index 0000000000..ce5579db3e --- /dev/null +++ b/Documentation/RelNotes/2.0.1.txt @@ -0,0 +1,115 @@ +Git v2.0.1 Release Notes +======================== + + * We used to unconditionally disable the pager in the pager process + we spawn to feed out output, but that prevented people who want to + run "less" within "less" from doing so. + + * Tools that read diagnostic output in our standard error stream do + not want to see terminal control sequence (e.g. erase-to-eol). + Detect them by checking if the standard error stream is connected + to a tty. + * Reworded the error message given upon a failure to open an existing + loose object file due to e.g. permission issues; it was reported as + the object being corrupt, but that is not quite true. + + * "git log -2master" is a common typo that shows two commits starting + from whichever random branch that is not 'master' that happens to + be checked out currently. + + * The "%<(10,trunc)%s" pretty format specifier in the log family of + commands is used to truncate the string to a given length (e.g. 10 + in the example) with padding to column-align the output, but did + not take into account that number of bytes and number of display + columns are different. + + * The "mailmap.file" configuration option did not support the tilde + expansion (i.e. ~user/path and ~/path). + + * The completion scripts (in contrib/) did not know about quite a few + options that are common between "git merge" and "git pull", and a + couple of options unique to "git merge". + + * "--ignore-space-change" option of "git apply" ignored the spaces + at the beginning of line too aggressively, which is inconsistent + with the option of the same name "diff" and "git diff" have. + + * "git blame" miscounted number of columns needed to show localized + timestamps, resulting in jaggy left-side-edge of the source code + lines in its output. + + * "git blame" assigned the blame to the copy in the working-tree if + the repository is set to core.autocrlf=input and the file used CRLF + line endings. + + * "git commit --allow-empty-message -C $commit" did not work when the + commit did not have any log message. + + * "git diff --find-copies-harder" sometimes pretended as if the mode + bits have changed for paths that are marked with assume-unchanged + bit. + + * "git format-patch" did not enforce the rule that the "--follow" + option from the log/diff family of commands must be used with + exactly one pathspec. + + * "git gc --auto" was recently changed to run in the background to + give control back early to the end-user sitting in front of the + terminal, but it forgot that housekeeping involving reflogs should + be done without other processes competing for accesses to the refs. + + * "git grep -O" to show the lines that hit in the pager did not work + well with case insensitive search. We now spawn "less" with its + "-I" option when it is used as the pager (which is the default). + + * We used to disable threaded "git index-pack" on platforms without + thread-safe pread(); use a different workaround for such + platforms to allow threaded "git index-pack". + + * The error reporting from "git index-pack" has been improved to + distinguish missing objects from type errors. + + * "git mailinfo" used to read beyond the end of header string while + parsing an incoming e-mail message to extract the patch. + + * On a case insensitive filesystem, merge-recursive incorrectly + deleted the file that is to be renamed to a name that is the same + except for case differences. + + * "git pack-objects" unnecessarily copied the previous contents when + extending the hashtable, even though it will populate the table + from scratch anyway. + + * "git rerere forget" did not work well when merge.conflictstyle + was set to a non-default value. + + * "git remote rm" and "git remote prune" can involve removing many + refs at once, which is not a very efficient thing to do when very + many refs exist in the packed-refs file. + + * "git log --exclude=<glob> --all | git shortlog" worked as expected, + but "git shortlog --exclude=<glob> --all", which is supposed to be + identical to the above pipeline, was not accepted at the command + line argument parser level. + + * The autostash mode of "git rebase -i" did not restore the dirty + working tree state if the user aborted the interactive rebase by + emptying the insn sheet. + + * "git show -s" (i.e. show log message only) used to incorrectly emit + an extra blank line after a merge commit. + + * "git status", even though it is a read-only operation, tries to + update the index with refreshed lstat(2) info to optimize future + accesses to the working tree opportunistically, but this could + race with a "read-write" operation that modify the index while it + is running. Detect such a race and avoid overwriting the index. + + * "git status" (and "git commit") behaved as if changes in a modified + submodule are not there if submodule.*.ignore configuration is set, + which was misleading. The configuration is only to unclutter diff + output during the course of development, and should not to hide + changes in the "status" output to cause the users forget to commit + them. + + * The mode to run tests with HTTP server tests disabled was broken. diff --git a/Documentation/RelNotes/2.0.2.txt b/Documentation/RelNotes/2.0.2.txt new file mode 100644 index 0000000000..8e8321b2ef --- /dev/null +++ b/Documentation/RelNotes/2.0.2.txt @@ -0,0 +1,32 @@ +Git v2.0.2 Release Notes +======================== + + * Documentation for "git submodule sync" forgot to say that the subcommand + can take the "--recursive" option. + + * Mishandling of patterns in .gitignore that has trailing SPs quoted + with backslashes (e.g. ones that end with "\ ") have been + corrected. + + * Recent updates to "git repack" started to duplicate objects that + are in packfiles marked with .keep flag into the new packfile by + mistake. + + * "git clone -b brefs/tags/bar" would have mistakenly thought we were + following a single tag, even though it was a name of the branch, + because it incorrectly used strstr(). + + * "%G" (nothing after G) is an invalid pretty format specifier, but + the parser did not notice it as garbage. + + * Code to avoid adding the same alternate object store twice was + subtly broken for a long time, but nobody seems to have noticed. + + * A handful of code paths had to read the commit object more than + once when showing header fields that are usually not parsed. The + internal data structure to keep track of the contents of the commit + object has been updated to reduce the need for this double-reading, + and to allow the caller find the length of the object. + + * During "git rebase --merge", a conflicted patch could not be + skipped with "--skip" if the next one also conflicted. diff --git a/Documentation/RelNotes/2.0.3.txt b/Documentation/RelNotes/2.0.3.txt new file mode 100644 index 0000000000..4047b46bbe --- /dev/null +++ b/Documentation/RelNotes/2.0.3.txt @@ -0,0 +1,17 @@ +Git v2.0.3 Release Notes +======================== + + * An ancient rewrite passed a wrong pointer to a curl library + function in a rarely used code path. + + * "filter-branch" left an empty single-parent commit that results when + all parents of a merge commit gets mapped to the same commit, even + under "--prune-empty". + + * "log --show-signature" incorrectly decided the color to paint a + mergetag that was and was not correctly validated. + + * "log --show-signature" did not pay attention to "--graph" option. + +Also a lot of fixes to the tests and some updates to the docs are +included. diff --git a/Documentation/RelNotes/2.0.4.txt b/Documentation/RelNotes/2.0.4.txt new file mode 100644 index 0000000000..7e340921a2 --- /dev/null +++ b/Documentation/RelNotes/2.0.4.txt @@ -0,0 +1,5 @@ +Git v2.0.4 Release Notes +======================== + + * An earlier update to v2.0.2 broken output from "git diff-tree", + which is fixed in this release. diff --git a/Documentation/RelNotes/2.0.5.txt b/Documentation/RelNotes/2.0.5.txt new file mode 100644 index 0000000000..3a16f697e8 --- /dev/null +++ b/Documentation/RelNotes/2.0.5.txt @@ -0,0 +1,34 @@ +Git v2.0.5 Release Notes +======================== + +Fixes since v2.0.4 +------------------ + + * We used to allow committing a path ".Git/config" with Git that is + running on a case sensitive filesystem, but an attempt to check out + such a path with Git that runs on a case insensitive filesystem + would have clobbered ".git/config", which is definitely not what + the user would have expected. Git now prevents you from tracking + a path with ".Git" (in any case combination) as a path component. + + * On Windows, certain path components that are different from ".git" + are mapped to ".git", e.g. "git~1/config" is treated as if it were + ".git/config". HFS+ has a similar issue, where certain unicode + codepoints are ignored, e.g. ".g\u200cit/config" is treated as if + it were ".git/config". Pathnames with these potential issues are + rejected on the affected systems. Git on systems that are not + affected by this issue (e.g. Linux) can also be configured to + reject them to ensure cross platform interoperability of the hosted + projects. + + * "git fsck" notices a tree object that records such a path that can + be confused with ".git", and with receive.fsckObjects configuration + set to true, an attempt to "git push" such a tree object will be + rejected. Such a path may not be a problem on a well behaving + filesystem but in order to protect those on HFS+ and on case + insensitive filesystems, this check is enabled on all platforms. + +A big "thanks!" for bringing this issue to us goes to our friends in +the Mercurial land, namely, Matt Mackall and Augie Fackler. + +Also contains typofixes, documentation updates and trivial code clean-ups. |