diff options
| -rw-r--r-- | contrib/hooks/multimail/CHANGES | 285 | ||||
| -rw-r--r-- | contrib/hooks/multimail/CONTRIBUTING.rst | 60 | ||||
| -rw-r--r-- | contrib/hooks/multimail/README.Git | 12 | ||||
| -rw-r--r-- | contrib/hooks/multimail/README.migrate-from-post-receive-email | 145 | ||||
| -rw-r--r-- | contrib/hooks/multimail/README.rst | 774 | ||||
| -rw-r--r-- | contrib/hooks/multimail/doc/customizing-emails.rst | 56 | ||||
| -rw-r--r-- | contrib/hooks/multimail/doc/gerrit.rst | 56 | ||||
| -rw-r--r-- | contrib/hooks/multimail/doc/gitolite.rst | 118 | ||||
| -rw-r--r-- | contrib/hooks/multimail/doc/troubleshooting.rst | 78 | ||||
| -rwxr-xr-x | contrib/hooks/multimail/git_multimail.py | 4346 | ||||
| -rwxr-xr-x | contrib/hooks/multimail/migrate-mailhook-config | 274 | ||||
| -rwxr-xr-x | contrib/hooks/multimail/post-receive.example | 101 |
12 files changed, 2 insertions, 6303 deletions
diff --git a/contrib/hooks/multimail/CHANGES b/contrib/hooks/multimail/CHANGES deleted file mode 100644 index 35791fd02c..0000000000 --- a/contrib/hooks/multimail/CHANGES +++ /dev/null @@ -1,285 +0,0 @@ -Release 1.5.0 -============= - -Backward-incompatible change ----------------------------- - -The name of classes for environment was misnamed as `*Environement`. -It is now `*Environment`. - -New features ------------- - -* A Thread-Index header is now added to each email sent (except for - combined emails where it would not make sense), so that MS Outlook - properly groups messages by threads even though they have a - different subject line. Unfortunately, even adding this header the - threading still seems to be unreliable, but it is unclear whether - this is an issue on our side or on MS Outlook's side (see discussion - here: https://github.com/git-multimail/git-multimail/pull/194). - -* A new variable multimailhook.ExcludeMergeRevisions was added to send - notification emails only for non-merge commits. - -* For gitolite environment, it is now possible to specify the mail map - in a separate file in addition to gitolite.conf, using the variable - multimailhook.MailaddressMap. - -Internal changes ----------------- - -* The testsuite now uses GIT_PRINT_SHA1_ELLIPSIS where needed for - compatibility with recent Git versions. Only tests are affected. - -* We don't try to install pyflakes in the continuous integration job - for old Python versions where it's no longer available. - -* Stop using the deprecated cgi.escape in Python 3. - -* New flake8 warnings have been fixed. - -* Python 3.6 is now tested against on Travis-CI. - -* A bunch of lgtm.com warnings have been fixed. - -Bug fixes ---------- - -* SMTPMailer logs in only once now. It used to re-login for each email - sent which triggered errors for some SMTP servers. - -* migrate-mailhook-config was broken by internal refactoring, it - should now work again. - -This version was tested with Python 2.6 to 3.7. It was tested with Git -1.7.10.406.gdc801, 2.15.1 and 2.20.1.98.gecbdaf0. - -Release 1.4.0 -============= - -New features to troubleshoot a git-multimail installation ---------------------------------------------------------- - -* One can now perform a basic check of git-multimail's setup by - running the hook with the environment variable - GIT_MULTIMAIL_CHECK_SETUP set to a non-empty string. See - doc/troubleshooting.rst for details. - -* A new log files system was added. See the multimailhook.logFile, - multimailhook.errorLogFile and multimailhook.debugLogFile variables. - -* git_multimail.py can now be made more verbose using - multimailhook.verbose. - -* A new option --check-ref-filter is now available to help debugging - the refFilter* options. - -Formatting emails ------------------ - -* Formatting of emails was made slightly more compact, to reduce the - odds of having long subject lines truncated or wrapped in short list - of commits. - -* multimailhook.emailPrefix may now use the '%(repo_shortname)s' - placeholder for the repository's short name. - -* A new option multimailhook.subjectMaxLength is available to truncate - overly long subject lines. - -Bug fixes and minor changes ---------------------------- - -* Options refFilterDoSendRegex and refFilterDontSendRegex were - essentially broken. They should work now. - -* The behavior when both refFilter{Do,Dont}SendRegex and - refFilter{Exclusion,Inclusion}Regex are set have been slightly - changed. Exclusion/Inclusion is now strictly stronger than - DoSend/DontSend. - -* The management of precedence when a setting can be computed in - multiple ways has been considerably refactored and modified. - multimailhook.from and multimailhook.reponame now have precedence - over the environment-specific settings ($GL_REPO/$GL_USER for - gitolite, --stash-user/repo for Stash, --submitter/--project for - Gerrit). - -* The coverage of the testsuite has been considerably improved. All - configuration variables now appear at least once in the testsuite. - -This version was tested with Python 2.6 to 3.5. It also mostly works -with Python 2.4, but there is one known breakage in the testsuite -related to non-ascii characters. It was tested with Git -1.7.10.406.gdc801, 1.8.5.6, 2.1.4, and 2.10.0.rc0.1.g07c9292. - -Release 1.3.1 (bugfix-only release) -=================================== - -* Generate links to commits in combined emails (it was done only for - commit emails in 1.3.0). - -* Fix broken links on PyPi. - -Release 1.3.0 -============= - -* New options multimailhook.htmlInIntro and multimailhook.htmlInFooter - now allow using HTML in the introduction and footer of emails (e.g. - for a more pleasant formatting or to insert a link to the commit on - a web interface). - -* A new option multimailhook.commitBrowseURL gives a simpler (and less - flexible) way to add a link to a web interface for commit emails - than multimailhook.htmlInIntro and multimailhook.htmlInFooter. - -* A new public function config.add_config_parameters was added to - allow custom hooks to set specific Git configuration variables - without modifying the configuration files. See an example in - post-receive.example. - -* Error handling for SMTP has been improved (we used to print Python - backtraces for legitimate errors). - -* The SMTP mailer can now check TLS certificates when the newly added - configuration variable multimailhook.smtpCACerts. - -* Python 3 portability has been improved. - -* The documentation's formatting has been improved. - -* The testsuite has been improved (we now use pyflakes to check for - errors in the code). - -This version has been tested with Python 2.4 and 2.6 to 3.5, and Git -v1.7.10-406-gdc801e7, 2.1.4 and 2.8.1.339.g3ad15fd. - -No change since 1.3 RC1. - -Release 1.2.0 -============= - -* It is now possible to exclude some refs (e.g. exclude some branches - or tags). See refFilterDoSendRegex, refFilterDontSendRegex, - refFilterInclusionRegex and refFilterExclusionRegex. - -* New commitEmailFormat option which can be set to "html" to generate - simple colorized diffs using HTML for the commit emails. - -* git-multimail can now be ran as a Gerrit ref-updated hook, or from - Atlassian BitBucket Server (formerly known as Atlassian Stash). - -* The From: field is now more customizeable. It can be set - independently for refchange emails and commit emails (see - fromCommit, fromRefChange). The special values pusher and author can - be used in these configuration variable. - -* A new command-line option, --version, was added. The version is also - available in the X-Git-Multimail-Version header of sent emails. - -* Set X-Git-NotificationType header to differentiate the various types - of notifications. Current values are: diff, ref_changed_plus_diff, - ref_changed. - -* Preliminary support for Python 3. The testsuite passes with Python 3, - but it has not received as much testing as the Python 2 version yet. - -* Several encoding-related fixes. UTF-8 characters work in more - situations (but non-ascii characters in email address are still not - supported). - -* The testsuite and its documentation has been greatly improved. - -Plus all the bugfixes from version 1.1.1. - -This version has been tested with Python 2.4 and 2.6 to 3.5, and Git -v1.7.10-406-gdc801e7, git-1.8.2.3 and 2.6.0. Git versions prior to -v1.7.10-406-gdc801e7 probably work, but cannot run the testsuite -properly. - -Release 1.1.1 (bugfix-only release) -=================================== - -* The SMTP mailer was not working with Python 2.4. - -Release 1.1.0 -============= - -* When a single commit is pushed, omit the reference changed email. - Set multimailhook.combineWhenSingleCommit to false to disable this - new feature. - -* In gitolite environments, the pusher's email address can be used as - the From address by creating a specially formatted comment block in - gitolite.conf (see multimailhook.from in README). - -* Support for SMTP authentication and SSL/TLS encryption was added, - see smtpUser, smtpPass, smtpEncryption in README. - -* A new option scanCommitForCc was added to allow git-multimail to - search the commit message for 'Cc: ...' lines, and add the - corresponding emails in Cc. - -* If $USER is not set, use the variable $USERNAME. This is needed on - Windows platform to recognize the pusher. - -* The emailPrefix variable can now be set to an empty string to remove - the prefix. - -* A short tutorial was added in doc/gitolite.rst to set up - git-multimail with gitolite. - -* The post-receive file was renamed to post-receive.example. It has - always been an example (the standard way to call git-multimail is to - call git_multimail.py), but it was unclear to many users. - -* A new refchangeShowGraph option was added to make it possible to - include both a graph and a log in the summary emails. The options - to control the graph formatting can be set via the new graphOpts - option. - -* New option --force-send was added to disable new commit detection - for update hook. One use-case is to run git_multimail.py after - running "git fetch" to send emails about commits that have just been - fetched (the detection of new commits was unreliable in this mode). - -* The testing infrastructure was considerably improved (continuous - integration with travis-ci, automatic check of PEP8 and RST syntax, - many improvements to the test scripts). - -This version has been tested with Python 2.4 to 2.7, and Git 1.7.1 to -2.4. - -Release 1.0.0 -============= - -* Fix encoding of non-ASCII email addresses in email headers. - -* Fix backwards-compatibility bugs for older Python 2.x versions. - -* Fix a backwards-compatibility bug for Git 1.7.1. - -* Add an option commitDiffOpts to customize logs for revisions. - -* Pass "-oi" to sendmail by default to prevent premature termination - on a line containing only ".". - -* Stagger email "Date:" values in an attempt to help mail clients - thread the emails in the right order. - -* If a mailing list setting is missing, just skip sending the - corresponding email (with a warning) instead of failing. - -* Add a X-Git-Host header that can be used for email filtering. - -* Allow the sender's fully-qualified domain name to be configured. - -* Minor documentation improvements. - -* Add this CHANGES file. - - -Release 0.9.0 -============= - -* Initial release. diff --git a/contrib/hooks/multimail/CONTRIBUTING.rst b/contrib/hooks/multimail/CONTRIBUTING.rst deleted file mode 100644 index de20a54287..0000000000 --- a/contrib/hooks/multimail/CONTRIBUTING.rst +++ /dev/null @@ -1,60 +0,0 @@ -Contributing -============ - -git-multimail is an open-source project, built by volunteers. We would -welcome your help! - -The current maintainers are `Matthieu Moy <http://matthieu-moy.fr>`__ and -`Michael Haggerty <https://github.com/mhagger>`__. - -Please note that although a copy of git-multimail is distributed in -the "contrib" section of the main Git project, development takes place -in a separate `git-multimail repository on GitHub`_. - -Whenever enough changes to git-multimail have accumulated, a new -code-drop of git-multimail will be submitted for inclusion in the Git -project. - -We use the GitHub issue tracker to keep track of bugs and feature -requests, and we use GitHub pull requests to exchange patches (though, -if you prefer, you can send patches via the Git mailing list with CC -to the maintainers). Please sign off your patches as per the `Git -project practice -<https://github.com/git/git/blob/master/Documentation/SubmittingPatches#L234>`__. - -Please vote for issues you would like to be addressed in priority -(click "add your reaction" and then the "+1" thumbs-up button on the -GitHub issue). - -General discussion of git-multimail can take place on the main `Git -mailing list`_. - -Please CC emails regarding git-multimail to the maintainers so that we -don't overlook them. - -Help needed: testers/maintainer for specific environments/OS ------------------------------------------------------------- - -The current maintainer uses and tests git-multimail on Linux with the -Generic environment. More testers, or better contributors are needed -to test git-multimail on other real-life setups: - -* Mac OS X, Windows: git-multimail is currently not supported on these - platforms. But since we have no external dependencies and try to - write code as portable as possible, it is possible that - git-multimail already runs there and if not, it is likely that it - could be ported easily. - - Patches to improve support for Windows and OS X are welcome. - Ideally, there would be a sub-maintainer for each OS who would test - at least once before each release (around twice a year). - -* Gerrit, Stash, Gitolite environments: although the testsuite - contains tests for these environments, a tester/maintainer for each - environment would be welcome to test and report failure (or success) - on real-life environments periodically (here also, feedback before - each release would be highly appreciated). - - -.. _`git-multimail repository on GitHub`: https://github.com/git-multimail/git-multimail -.. _`Git mailing list`: git@vger.kernel.org diff --git a/contrib/hooks/multimail/README.Git b/contrib/hooks/multimail/README.Git index 044444245d..c427efc7bd 100644 --- a/contrib/hooks/multimail/README.Git +++ b/contrib/hooks/multimail/README.Git @@ -1,15 +1,7 @@ -This copy of git-multimail is distributed as part of the "contrib" -section of the Git project as a convenience to Git users. git-multimail is developed as an independent project at the following website: https://github.com/git-multimail/git-multimail -The version in this directory was obtained from the upstream project -on January 07 2019 and consists of the "git-multimail" subdirectory from -revision - - 04e80e6c40be465cc62b6c246f0fcb8fd2cfd454 refs/tags/1.5.0 - -Please see the README file in this directory for information about how -to report bugs or contribute to git-multimail. +Please refer to that project page for information about how to report +bugs or contribute to git-multimail. diff --git a/contrib/hooks/multimail/README.migrate-from-post-receive-email b/contrib/hooks/multimail/README.migrate-from-post-receive-email deleted file mode 100644 index 1e6a976699..0000000000 --- a/contrib/hooks/multimail/README.migrate-from-post-receive-email +++ /dev/null @@ -1,145 +0,0 @@ -git-multimail is close to, but not exactly, a plug-in replacement for -the old Git project script contrib/hooks/post-receive-email. This -document describes the differences and explains how to configure -git-multimail to get behavior closest to that of post-receive-email. - -If you are in a hurry -===================== - -A script called migrate-mailhook-config is included with -git-multimail. If you run this script within a Git repository that is -configured to use post-receive-email, it will convert the -configuration settings into the approximate equivalent settings for -git-multimail. For more information, run - - migrate-mailhook-config --help - - -Configuration differences -========================= - -* The names of the config options for git-multimail are in namespace - "multimailhook.*" instead of "hooks.*". (Editorial comment: - post-receive-email should never have used such a generic top-level - namespace.) - -* In emails about new annotated tags, post-receive-email includes a - shortlog of all changes since the previous annotated tag. To get - this behavior with git-multimail, you need to set - multimailhook.announceshortlog to true: - - git config multimailhook.announceshortlog true - -* multimailhook.commitlist -- This is a new configuration variable. - Recipients listed here will receive a separate email for each new - commit. However, if this variable is *not* set, it defaults to the - value of multimailhook.mailinglist. Therefore, if you *don't* want - the members of multimailhook.mailinglist to receive one email per - commit, then set this value to the empty string: - - git config multimailhook.commitlist '' - -* multimailhook.emailprefix -- If this value is not set, then the - subjects of generated emails are prefixed with the short name of the - repository enclosed in square brackets; e.g., "[myrepo]". - post-receive-email defaults to prefix "[SCM]" if this option is not - set. So if you were using the old default and want to retain it - (for example, to avoid having to change your email filters), set - this variable explicitly to the old value: - - git config multimailhook.emailprefix "[SCM]" - -* The "multimailhook.showrev" configuration option is not supported. - Its main use is obsoleted by the one-email-per-commit feature of - git-multimail. - - -Other differences -================= - -This section describes other differences in the behavior of -git-multimail vs. post-receive-email. For full details, please refer -to the main README file: - -* One email per commit. For each reference change, the script first - outputs one email summarizing the reference change (including - one-line summaries of the new commits), then it outputs a separate - email for each new commit that was introduced, including patches. - These one-email-per-commit emails go to the addresses listed in - multimailhook.commitlist. post-receive-email sends only one email - for each *reference* that is changed, no matter how many commits - were added to the reference. - -* Better algorithm for detecting new commits. post-receive-email - processes one reference change at a time, which causes it to fail to - describe new commits that were included in multiple branches. For - example, if a single push adds the "*" commits in the diagram below, - then post-receive-email would never include the details of the two - commits that are common to "master" and "branch" in its - notifications. - - o---o---o---*---*---* <-- master - \ - *---* <-- branch - - git-multimail analyzes all reference modifications to determine - which commits were not present before the change, therefore avoiding - that error. - -* In reference change emails, git-multimail tells which commits have - been added to the reference vs. are entirely new to the repository, - and which commits that have been omitted from the reference - vs. entirely discarded from the repository. - -* The environment in which Git is running can be configured via an - "Environment" abstraction. - -* Built-in support for Gitolite-managed repositories. - -* Instead of using full SHA1 object names in emails, git-multimail - mostly uses abbreviated SHA1s, plus one-line log message summaries - where appropriate. - -* In the schematic diagrams that explain non-fast-forward commits, - git-multimail shows the names of the branches involved. - -* The emails generated by git-multimail include the name of the Git - repository that was modified; this is convenient for recipients who - are monitoring multiple repositories. - -* git-multimail allows the email "From" addresses to be configured. - -* The recipients lists (multimailhook.mailinglist, - multimailhook.refchangelist, multimailhook.announcelist, and - multimailhook.commitlist) can be comma-separated values and/or - multivalued settings in the config file; e.g., - - [multimailhook] - mailinglist = mr.brown@example.com, mr.black@example.com - announcelist = Him <him@example.com> - announcelist = Jim <jim@example.com> - announcelist = pop@example.com - - This might make it easier to maintain short recipients lists without - requiring full-fledged mailing list software. - -* By default, git-multimail sets email "Reply-To" headers to reply to - the pusher (for reference updates) and to the author (for commit - notifications). By default, the pusher's email address is - constructed by appending "multimailhook.emaildomain" to the pusher's - username. - -* The generated emails contain a configurable footer. By default, it - lists the name of the administrator who should be contacted to - unsubscribe from notification emails. - -* New option multimailhook.emailmaxlinelength to limit the length of - lines in the main part of the email body. The default limit is 500 - characters. - -* New option multimailhook.emailstrictutf8 to ensure that the main - part of the email body is valid UTF-8. Invalid characters are - turned into the Unicode replacement character, U+FFFD. By default - this option is turned on. - -* Written in Python. Easier to add new features. diff --git a/contrib/hooks/multimail/README.rst b/contrib/hooks/multimail/README.rst deleted file mode 100644 index 7c0fc4a6ef..0000000000 --- a/contrib/hooks/multimail/README.rst +++ /dev/null @@ -1,774 +0,0 @@ -git-multimail version 1.5.0 -=========================== - -.. image:: https://travis-ci.org/git-multimail/git-multimail.svg?branch=master - :target: https://travis-ci.org/git-multimail/git-multimail - -git-multimail is a tool for sending notification emails on pushes to a -Git repository. It includes a Python module called ``git_multimail.py``, -which can either be used as a hook script directly or can be imported -as a Python module into another script. - -git-multimail is derived from the Git project's old -contrib/hooks/post-receive-email, and is mostly compatible with that -script. See README.migrate-from-post-receive-email for details about -the differences and for how to migrate from post-receive-email to -git-multimail. - -git-multimail, like the rest of the Git project, is licensed under -GPLv2 (see the COPYING file for details). - -Please note: although, as a convenience, git-multimail may be -distributed along with the main Git project, development of -git-multimail takes place in its own, separate project. Please, read -`<CONTRIBUTING.rst>`__ for more information. - - -By default, for each push received by the repository, git-multimail: - -1. Outputs one email summarizing each reference that was changed. - These "reference change" (called "refchange" below) emails describe - the nature of the change (e.g., was the reference created, deleted, - fast-forwarded, etc.) and include a one-line summary of each commit - that was added to the reference. - -2. Outputs one email for each new commit that was introduced by the - reference change. These "commit" emails include a list of the - files changed by the commit, followed by the diffs of files - modified by the commit. The commit emails are threaded to the - corresponding reference change email via "In-Reply-To". This style - (similar to the "git format-patch" style used on the Git mailing - list) makes it easy to scan through the emails, jump to patches - that need further attention, and write comments about specific - commits. Commits are handled in reverse topological order (i.e., - parents shown before children). For example:: - - [git] branch master updated - + [git] 01/08: doc: fix xref link from api docs to manual pages - + [git] 02/08: api-credentials.txt: show the big picture first - + [git] 03/08: api-credentials.txt: mention credential.helper explicitly - + [git] 04/08: api-credentials.txt: add "see also" section - + [git] 05/08: t3510 (cherry-pick-sequence): add missing '&&' - + [git] 06/08: Merge branch 'rr/maint-t3510-cascade-fix' - + [git] 07/08: Merge branch 'mm/api-credentials-doc' - + [git] 08/08: Git 1.7.11-rc2 - - By default, each commit appears in exactly one commit email, the - first time that it is pushed to the repository. If a commit is later - merged into another branch, then a one-line summary of the commit - is included in the reference change email (as usual), but no - additional commit email is generated. See - `multimailhook.refFilter(Inclusion|Exclusion|DoSend|DontSend)Regex` - below to configure which branches and tags are watched by the hook. - - By default, reference change emails have their "Reply-To" field set - to the person who pushed the change, and commit emails have their - "Reply-To" field set to the author of the commit. - -3. Output one "announce" mail for each new annotated tag, including - information about the tag and optionally a shortlog describing the - changes since the previous tag. Such emails might be useful if you - use annotated tags to mark releases of your project. - - -Requirements ------------- - -* Python 2.x, version 2.4 or later. No non-standard Python modules - are required. git-multimail has preliminary support for Python 3 - (but it has been better tested with Python 2). - -* The ``git`` command must be in your PATH. git-multimail is known to - work with Git versions back to 1.7.1. (Earlier versions have not - been tested; if you do so, please report your results.) - -* To send emails using the default configuration, a standard sendmail - program must be located at '/usr/sbin/sendmail' or - '/usr/lib/sendmail' and must be configured correctly to send emails. - If this is not the case, set multimailhook.sendmailCommand, or see - the multimailhook.mailer configuration variable below for how to - configure git-multimail to send emails via an SMTP server. - -* git-multimail is currently tested only on Linux. It may or may not - work on other platforms such as Windows and Mac OS. See - `<CONTRIBUTING.rst>`__ to improve the situation. - - -Invocation ----------- - -``git_multimail.py`` is designed to be used as a ``post-receive`` hook in a -Git repository (see githooks(5)). Link or copy it to -$GIT_DIR/hooks/post-receive within the repository for which email -notifications are desired. Usually it should be installed on the -central repository for a project, to which all commits are eventually -pushed. - -For use on pre-v1.5.1 Git servers, ``git_multimail.py`` can also work as -an ``update`` hook, taking its arguments on the command line. To use -this script in this manner, link or copy it to $GIT_DIR/hooks/update. -Please note that the script is not completely reliable in this mode -[1]_. - -Alternatively, ``git_multimail.py`` can be imported as a Python module -into your own Python post-receive script. This method is a bit more -work, but allows the behavior of the hook to be customized using -arbitrary Python code. For example, you can use a custom environment -(perhaps inheriting from GenericEnvironment or GitoliteEnvironment) to - -* change how the user who did the push is determined - -* read users' email addresses from an LDAP server or from a database - -* decide which users should be notified about which commits based on - the contents of the commits (e.g., for users who want to be notified - only about changes affecting particular files or subdirectories) - -Or you can change how emails are sent by writing your own Mailer -class. The ``post-receive`` script in this directory demonstrates how -to use ``git_multimail.py`` as a Python module. (If you make interesting -changes of this type, please consider sharing them with the -community.) - - -Troubleshooting/FAQ -------------------- - -Please read `<doc/troubleshooting.rst>`__ for frequently asked -questions and common issues with git-multimail. - - -Configuration -------------- - -By default, git-multimail mostly takes its configuration from the -following ``git config`` settings: - -multimailhook.environment - This describes the general environment of the repository. In most - cases, you do not need to specify a value for this variable: - `git-multimail` will autodetect which environment to use. - Currently supported values: - - generic - the username of the pusher is read from $USER or $USERNAME and - the repository name is derived from the repository's path. - - gitolite - Environment to use when ``git-multimail`` is ran as a gitolite_ - hook. - - The username of the pusher is read from $GL_USER, the repository - name is read from $GL_REPO, and the From: header value is - optionally read from gitolite.conf (see multimailhook.from). - - For more information about gitolite and git-multimail, read - `<doc/gitolite.rst>`__ - - stash - Environment to use when ``git-multimail`` is ran as an Atlassian - BitBucket Server (formerly known as Atlassian Stash) hook. - - **Warning:** this mode was provided by a third-party contributor - and never tested by the git-multimail maintainers. It is - provided as-is and may or may not work for you. - - This value is automatically assumed when the stash-specific - flags (``--stash-user`` and ``--stash-repo``) are specified on - the command line. When this environment is active, the username - and repo come from these two command line flags, which must be - specified. - - gerrit - Environment to use when ``git-multimail`` is ran as a - ``ref-updated`` Gerrit hook. - - This value is used when the gerrit-specific command line flags - (``--oldrev``, ``--newrev``, ``--refname``, ``--project``) for - gerrit's ref-updated hook are present. When this environment is - active, the username of the pusher is taken from the - ``--submitter`` argument if that command line option is passed, - otherwise 'Gerrit' is used. The repository name is taken from - the ``--project`` option on the command line, which must be passed. - - For more information about gerrit and git-multimail, read - `<doc/gerrit.rst>`__ - - If none of these environments is suitable for your setup, then you - can implement a Python class that inherits from Environment and - instantiate it via a script that looks like the example - post-receive script. - - The environment value can be specified on the command line using - the ``--environment`` option. If it is not specified on the - command line or by ``multimailhook.environment``, the value is - guessed as follows: - - * If stash-specific (respectively gerrit-specific) command flags - are present on the command-line, then ``stash`` (respectively - ``gerrit``) is used. - - * If the environment variables $GL_USER and $GL_REPO are set, then - ``gitolite`` is used. - - * If none of the above apply, then ``generic`` is used. - -multimailhook.repoName - A short name of this Git repository, to be used in various places - in the notification email text. The default is to use $GL_REPO - for gitolite repositories, or otherwise to derive this value from - the repository path name. - -multimailhook.mailingList - The list of email addresses to which notification emails should be - sent, as RFC 2822 email addresses separated by commas. This - configuration option can be multivalued. Leave it unset or set it - to the empty string to not send emails by default. The next few - settings can be used to configure specific address lists for - specific types of notification email. - -multimailhook.refchangeList - The list of email addresses to which summary emails about - reference changes should be sent, as RFC 2822 email addresses - separated by commas. This configuration option can be - multivalued. The default is the value in - multimailhook.mailingList. Set this value to "none" (or the empty - string) to prevent reference change emails from being sent even if - multimailhook.mailingList is set. - -multimailhook.announceList - The list of email addresses to which emails about new annotated - tags should be sent, as RFC 2822 email addresses separated by - commas. This configuration option can be multivalued. The - default is the value in multimailhook.refchangeList or - multimailhook.mailingList. Set this value to "none" (or the empty - string) to prevent annotated tag announcement emails from being sent - even if one of the other values is set. - -multimailhook.commitList - The list of email addresses to which emails about individual new - commits should be sent, as RFC 2822 email addresses separated by - commas. This configuration option can be multivalued. The - default is the value in multimailhook.mailingList. Set this value - to "none" (or the empty string) to prevent notification emails about - individual commits from being sent even if - multimailhook.mailingList is set. - -multimailhook.announceShortlog - If this option is set to true, then emails about changes to - annotated tags include a shortlog of changes since the previous - tag. This can be useful if the annotated tags represent releases; - then the shortlog will be a kind of rough summary of what has - happened since the last release. But if your tagging policy is - not so straightforward, then the shortlog might be confusing - rather than useful. Default is false. - -multimailhook.commitEmailFormat - The format of email messages for the individual commits, can be "text" or - "html". In the latter case, the emails will include diffs using colorized - HTML instead of plain text used by default. Note that this currently the - ref change emails are always sent in plain text. - - Note that when using "html", the formatting is done by parsing the - output of ``git log`` with ``-p``. When using - ``multimailhook.commitLogOpts`` to specify a ``--format`` for - ``git log``, one may get false positive (e.g. lines in the body of - the message starting with ``+++`` or ``---`` colored in red or - green). - - By default, all the message is HTML-escaped. See - ``multimailhook.htmlInIntro`` to change this behavior. - -multimailhook.commitBrowseURL - Used to generate a link to an online repository browser in commit - emails. This variable must be a string. Format directives like - ``%(<variable>)s`` will be expanded the same way as template - strings. In particular, ``%(id)s`` will be replaced by the full - Git commit identifier (40-chars hexadecimal). - - If the string does not contain any format directive, then - ``%(id)s`` will be automatically added to the string. If you don't - want ``%(id)s`` to be automatically added, use the empty format - directive ``%()s`` anywhere in the string. - - For example, a suitable value for the git-multimail project itself - would be - ``https://github.com/git-multimail/git-multimail/commit/%(id)s``. - -multimailhook.htmlInIntro, multimailhook.htmlInFooter - When generating an HTML message, git-multimail escapes any HTML - sequence by default. This means that if a template contains HTML - like ``<a href="foo">link</a>``, the reader will see the HTML - source code and not a proper link. - - Set ``multimailhook.htmlInIntro`` to true to allow writing HTML - formatting in introduction templates. Similarly, set - ``multimailhook.htmlInFooter`` for HTML in the footer. - - Variables expanded in the template are still escaped. For example, - if a repository's path contains a ``<``, it will be rendered as - such in the message. - - Read `<doc/customizing-emails.rst>`__ for more details and - examples. - -multimailhook.refchangeShowGraph - If this option is set to true, then summary emails about reference - changes will additionally include: - - * a graph of the added commits (if any) - - * a graph of the discarded commits (if any) - - The log is generated by running ``git log --graph`` with the options - specified in graphOpts. The default is false. - -multimailhook.refchangeShowLog - If this option is set to true, then summary emails about reference - changes will include a detailed log of the added commits in - addition to the one line summary. The log is generated by running - ``git log`` with the options specified in multimailhook.logOpts. - Default is false. - -multimailhook.mailer - This option changes the way emails are sent. Accepted values are: - - * **sendmail (the default)**: use the command ``/usr/sbin/sendmail`` or - ``/usr/lib/sendmail`` (or sendmailCommand, if configured). This - mode can be further customized via the following options: - - multimailhook.sendmailCommand - The command used by mailer ``sendmail`` to send emails. Shell - quoting is allowed in the value of this setting, but remember that - Git requires double-quotes to be escaped; e.g.:: - - git config multimailhook.sendmailcommand '/usr/sbin/sendmail -oi -t -F \"Git Repo\"' - - Default is '/usr/sbin/sendmail -oi -t' or - '/usr/lib/sendmail -oi -t' (depending on which file is - present and executable). - - multimailhook.envelopeSender - If set then pass this value to sendmail via the -f option to set - the envelope sender address. - - * **smtp**: use Python's smtplib. This is useful when the sendmail - command is not available on the system. This mode can be - further customized via the following options: - - multimailhook.smtpServer - The name of the SMTP server to connect to. The value can - also include a colon and a port number; e.g., - ``mail.example.com:25``. Default is 'localhost' using port 25. - - multimailhook.smtpUser, multimailhook.smtpPass - Server username and password. Required if smtpEncryption is 'ssl'. - Note that the username and password currently need to be - set cleartext in the configuration file, which is not - recommended. If you need to use this option, be sure your - configuration file is read-only. - - multimailhook.envelopeSender - The sender address to be passed to the SMTP server. If - unset, then the value of multimailhook.from is used. - - multimailhook.smtpServerTimeout - Timeout in seconds. Default is 10. - - multimailhook.smtpEncryption - Set the security type. Allowed values: ``none``, ``ssl``, ``tls`` (starttls). - Default is ``none``. - - multimailhook.smtpCACerts - Set the path to a list of trusted CA certificate to verify the - server certificate, only supported when ``smtpEncryption`` is - ``tls``. If unset or empty, the server certificate is not - verified. If it targets a file containing a list of trusted CA - certificates (PEM format) these CAs will be used to verify the - server certificate. For debian, you can set - ``/etc/ssl/certs/ca-certificates.crt`` for using the system - trusted CAs. For self-signed server, you can add your server - certificate to the system store:: - - cd /usr/local/share/ca-certificates/ - openssl s_client -starttls smtp \ - -connect mail.example.net:587 -showcerts \ - </dev/null 2>/dev/null \ - | openssl x509 -outform PEM >mail.example.net.crt - update-ca-certificates - - and used the updated ``/etc/ssl/certs/ca-certificates.crt``. Or - directly use your ``/path/to/mail.example.net.crt``. Default is - unset. - - multimailhook.smtpServerDebugLevel - Integer number. Set to greater than 0 to activate debugging. - -multimailhook.from, multimailhook.fromCommit, multimailhook.fromRefchange - If set, use this value in the From: field of generated emails. - ``fromCommit`` is used for commit emails, ``fromRefchange`` is - used for refchange emails, and ``from`` is used as fall-back in - all cases. - - The value for these variables can be either: - - - An email address, which will be used directly. - - - The value ``pusher``, in which case the pusher's address (if - available) will be used. - - - The value ``author`` (meaningful only for ``fromCommit``), in which - case the commit author's address will be used. - - If config values are unset, the value of the From: header is - determined as follows: - - 1. (gitolite environment only) - 1.a) If ``multimailhook.MailaddressMap`` is set, and is a path - to an existing file (if relative, it is considered relative to - the place where ``gitolite.conf`` is located), then this file - should contain lines like:: - - username Firstname Lastname <email@example.com> - - git-multimail will then look for a line where ``$GL_USER`` - matches the ``username`` part, and use the rest of the line for - the ``From:`` header. - - 1.b) Parse gitolite.conf, looking for a block of comments that - looks like this:: - - # BEGIN USER EMAILS - # username Firstname Lastname <email@example.com> - # END USER EMAILS - - If that block exists, and there is a line between the BEGIN - USER EMAILS and END USER EMAILS lines where the first field - matches the gitolite username ($GL_USER), use the rest of the - line for the From: header. - - 2. If the user.email configuration setting is set, use its value - (and the value of user.name, if set). - - 3. Use the value of multimailhook.envelopeSender. - -multimailhook.MailaddressMap - (gitolite environment only) - File to look for a ``From:`` address based on the user doing the - push. Defaults to unset. See ``multimailhook.from`` for details. - -multimailhook.administrator - The name and/or email address of the administrator of the Git - repository; used in FOOTER_TEMPLATE. Default is - multimailhook.envelopesender if it is set; otherwise a generic - string is used. - -multimailhook.emailPrefix - All emails have this string prepended to their subjects, to aid - email filtering (though filtering based on the X-Git-* email - headers is probably more robust). Default is the short name of - the repository in square brackets; e.g., ``[myrepo]``. Set this - value to the empty string to suppress the email prefix. You may - use the placeholder ``%(repo_shortname)s`` for the short name of - the repository. - -multimailhook.emailMaxLines - The maximum number of lines that should be included in the body of - a generated email. If not specified, there is no limit. Lines - beyond the limit are suppressed and counted, and a final line is - added indicating the number of suppressed lines. - -multimailhook.emailMaxLineLength - The maximum length of a line in the email body. Lines longer than - this limit are truncated to this length with a trailing ``[...]`` - added to indicate the missing text. The default is 500, because - (a) diffs with longer lines are probably from binary files, for - which a diff is useless, and (b) even if a text file has such long - lines, the diffs are probably unreadable anyway. To disable line - truncation, set this option to 0. - -multimailhook.subjectMaxLength - The maximum length of the subject line (i.e. the ``oneline`` field - in templates, not including the prefix). Lines longer than this - limit are truncated to this length with a trailing ``[...]`` added - to indicate the missing text. This option The default is to use - ``multimailhook.emailMaxLineLength``. This option avoids sending - emails with overly long subject lines, but should not be needed if - the commit messages follow the Git convention (one short subject - line, then a blank line, then the message body). To disable line - truncation, set this option to 0. - -multimailhook.maxCommitEmails - The maximum number of commit emails to send for a given change. - When the number of patches is larger that this value, only the - summary refchange email is sent. This can avoid accidental - mailbombing, for example on an initial push. To disable commit - emails limit, set this option to 0. The default is 500. - -multimailhook.excludeMergeRevisions - When sending out revision emails, do not consider merge commits (the - functional equivalent of `rev-list --no-merges`). - The default is `false` (send merge commit emails). - -multimailhook.emailStrictUTF8 - If this boolean option is set to `true`, then the main part of the - email body is forced to be valid UTF-8. Any characters that are - not valid UTF-8 are converted to the Unicode replacement - character, U+FFFD. The default is `true`. - - This option is ineffective with Python 3, where non-UTF-8 - characters are unconditionally replaced. - -multimailhook.diffOpts - Options passed to ``git diff-tree`` when generating the summary - information for ReferenceChange emails. Default is ``--stat - --summary --find-copies-harder``. Add -p to those options to - include a unified diff of changes in addition to the usual summary - output. Shell quoting is allowed; see ``multimailhook.logOpts`` for - details. - -multimailhook.graphOpts - Options passed to ``git log --graph`` when generating graphs for the - reference change summary emails (used only if refchangeShowGraph - is true). The default is '--oneline --decorate'. - - Shell quoting is allowed; see logOpts for details. - -multimailhook.logOpts - Options passed to ``git log`` to generate additional info for - reference change emails (used only if refchangeShowLog is set). - For example, adding -p will show each commit's complete diff. The - default is empty. - - Shell quoting is allowed; for example, a log format that contains - spaces can be specified using something like:: - - git config multimailhook.logopts '--pretty=format:"%h %aN <%aE>%n%s%n%n%b%n"' - - If you want to set this by editing your configuration file - directly, remember that Git requires double-quotes to be escaped - (see git-config(1) for more information):: - - [multimailhook] - logopts = --pretty=format:\"%h %aN <%aE>%n%s%n%n%b%n\" - -multimailhook.commitLogOpts - Options passed to ``git log`` to generate additional info for - revision change emails. For example, adding --ignore-all-spaces - will suppress whitespace changes. The default options are ``-C - --stat -p --cc``. Shell quoting is allowed; see - multimailhook.logOpts for details. - -multimailhook.dateSubstitute - String to use as a substitute for ``Date:`` in the output of ``git - log`` while formatting commit messages. This is useful to avoid - emitting a line that can be interpreted by mailers as the start of - a cited message (Zimbra webmail in particular). Defaults to - ``CommitDate:``. Set to an empty string or ``none`` to deactivate - the behavior. - -multimailhook.emailDomain - Domain name appended to the username of the person doing the push - to convert it into an email address - (via ``"%s@%s" % (username, emaildomain)``). More complicated - schemes can be implemented by overriding Environment and - overriding its get_pusher_email() method. - -multimailhook.replyTo, multimailhook.replyToCommit, multimailhook.replyToRefchange - Addresses to use in the Reply-To: field for commit emails - (replyToCommit) and refchange emails (replyToRefchange). - multimailhook.replyTo is used as default when replyToCommit or - replyToRefchange is not set. The shortcuts ``pusher`` and - ``author`` are allowed with the same semantics as for - ``multimailhook.from``. In addition, the value ``none`` can be - used to omit the ``Reply-To:`` field. - - The default is ``pusher`` for refchange emails, and ``author`` for - commit emails. - -multimailhook.quiet - Do not output the list of email recipients from the hook - -multimailhook.stdout - For debugging, send emails to stdout rather than to the - mailer. Equivalent to the --stdout command line option - -multimailhook.scanCommitForCc - If this option is set to true, than recipients from lines in commit body - that starts with ``CC:`` will be added to CC list. - Default: false - -multimailhook.combineWhenSingleCommit - If this option is set to true and a single new commit is pushed to - a branch, combine the summary and commit email messages into a - single email. - Default: true - -multimailhook.refFilterInclusionRegex, multimailhook.refFilterExclusionRegex, multimailhook.refFilterDoSendRegex, multimailhook.refFilterDontSendRegex - **Warning:** these options are experimental. They should work, but - the user-interface is not stable yet (in particular, the option - names may change). If you want to participate in stabilizing the - feature, please contact the maintainers and/or send pull-requests. - If you are happy with the current shape of the feature, please - report it too. - - Regular expressions that can be used to limit refs for which email - updates will be sent. It is an error to specify both an inclusion - and an exclusion regex. If a ``refFilterInclusionRegex`` is - specified, emails will only be sent for refs which match this - regex. If a ``refFilterExclusionRegex`` regex is specified, - emails will be sent for all refs except those that match this - regex (or that match a predefined regex specific to the - environment, such as "^refs/notes" for most environments and - "^refs/notes|^refs/changes" for the gerrit environment). - - The expressions are matched against the complete refname, and is - considered to match if any substring matches. For example, to - filter-out all tags, set ``refFilterExclusionRegex`` to - ``^refs/tags/`` (note the leading ``^`` but no trailing ``$``). If - you set ``refFilterExclusionRegex`` to ``master``, then any ref - containing ``master`` will be excluded (the ``master`` branch, but - also ``refs/tags/master`` or ``refs/heads/foo-master-bar``). - - ``refFilterDoSendRegex`` and ``refFilterDontSendRegex`` are - analogous to ``refFilterInclusionRegex`` and - ``refFilterExclusionRegex`` with one difference: with - ``refFilterDoSendRegex`` and ``refFilterDontSendRegex``, commits - introduced by one excluded ref will not be considered as new when - they reach an included ref. Typically, if you add a branch ``foo`` - to ``refFilterDontSendRegex``, push commits to this branch, and - later merge branch ``foo`` into ``master``, then the notification - email for ``master`` will contain a commit email only for the - merge commit. If you include ``foo`` in - ``refFilterExclusionRegex``, then at the time of merge, you will - receive one commit email per commit in the branch. - - These variables can be multi-valued, like:: - - [multimailhook] - refFilterExclusionRegex = ^refs/tags/ - refFilterExclusionRegex = ^refs/heads/master$ - - You can also provide a whitespace-separated list like:: - - [multimailhook] - refFilterExclusionRegex = ^refs/tags/ ^refs/heads/master$ - - Both examples exclude tags and the master branch, and are - equivalent to:: - - [multimailhook] - refFilterExclusionRegex = ^refs/tags/|^refs/heads/master$ - - ``refFilterInclusionRegex`` and ``refFilterExclusionRegex`` are - strictly stronger than ``refFilterDoSendRegex`` and - ``refFilterDontSendRegex``. In other words, adding a ref to a - DoSend/DontSend regex has no effect if it is already excluded by a - Exclusion/Inclusion regex. - -multimailhook.logFile, multimailhook.errorLogFile, multimailhook.debugLogFile - - When set, these variable designate path to files where - git-multimail will log some messages. Normal messages and error - messages are sent to ``logFile``, and error messages are also sent - to ``errorLogFile``. Debug messages and all other messages are - sent to ``debugLogFile``. The recommended way is to set only one - of these variables, but it is also possible to set several of them - (part of the information is then duplicated in several log files, - for example errors are duplicated to all log files). - - Relative path are relative to the Git repository where the push is - done. - -multimailhook.verbose - - Verbosity level of git-multimail on its standard output. By - default, show only error and info messages. If set to true, show - also debug messages. - -Email filtering aids --------------------- - -All emails include extra headers to enable fine tuned filtering and -give information for debugging. All emails include the headers -``X-Git-Host``, ``X-Git-Repo``, ``X-Git-Refname``, and ``X-Git-Reftype``. -ReferenceChange emails also include headers ``X-Git-Oldrev`` and ``X-Git-Newrev``; -Revision emails also include header ``X-Git-Rev``. - - -Customizing email contents --------------------------- - -git-multimail mostly generates emails by expanding templates. The -templates can be customized. To avoid the need to edit -``git_multimail.py`` directly, the preferred way to change the templates -is to write a separate Python script that imports ``git_multimail.py`` as -a module, then replaces the templates in place. See the provided -post-receive script for an example of how this is done. - - -Customizing git-multimail for your environment ----------------------------------------------- - -git-multimail is mostly customized via an "environment" that describes -the local environment in which Git is running. Two types of -environment are built in: - -GenericEnvironment - a stand-alone Git repository. - -GitoliteEnvironment - a Git repository that is managed by gitolite_. For such - repositories, the identity of the pusher is read from - environment variable $GL_USER, the name of the repository is read - from $GL_REPO (if it is not overridden by multimailhook.reponame), - and the From: header value is optionally read from gitolite.conf - (see multimailhook.from). - -By default, git-multimail assumes GitoliteEnvironment if $GL_USER and -$GL_REPO are set, and otherwise assumes GenericEnvironment. -Alternatively, you can choose one of these two environments explicitly -by setting a ``multimailhook.environment`` config setting (which can -have the value `generic` or `gitolite`) or by passing an --environment -option to the script. - -If you need to customize the script in ways that are not supported by -the existing environments, you can define your own environment class -class using arbitrary Python code. To do so, you need to import -``git_multimail.py`` as a Python module, as demonstrated by the example -post-receive script. Then implement your environment class; it should -usually inherit from one of the existing Environment classes and -possibly one or more of the EnvironmentMixin classes. Then set the -``environment`` variable to an instance of your own environment class -and pass it to ``run_as_post_receive_hook()``. - -The standard environment classes, GenericEnvironment and -GitoliteEnvironment, are in fact themselves put together out of a -number of mixin classes, each of which handles one aspect of the -customization. For the finest control over your configuration, you -can specify exactly which mixin classes your own environment class -should inherit from, and override individual methods (or even add your -own mixin classes) to implement entirely new behaviors. If you -implement any mixins that might be useful to other people, please -consider sharing them with the community! - - -Getting involved ----------------- - -Please, read `<CONTRIBUTING.rst>`__ for instructions on how to -contribute to git-multimail. - - -Footnotes ---------- - -.. [1] Because of the way information is passed to update hooks, the - script's method of determining whether a commit has already - been seen does not work when it is used as an ``update`` script. - In particular, no notification email will be generated for a - new commit that is added to multiple references in the same - push. A workaround is to use --force-send to force sending the - emails. - -.. _gitolite: https://github.com/sitaramc/gitolite diff --git a/contrib/hooks/multimail/doc/customizing-emails.rst b/contrib/hooks/multimail/doc/customizing-emails.rst deleted file mode 100644 index 3f5b67f768..0000000000 --- a/contrib/hooks/multimail/doc/customizing-emails.rst +++ /dev/null @@ -1,56 +0,0 @@ -Customizing the content and formatting of emails -================================================ - -Overloading template strings ----------------------------- - -The content of emails is generated based on template strings defined -in ``git_multimail.py``. You can customize these template strings -without changing the script itself, by defining a Python wrapper -around it. The python wrapper should ``import git_multimail`` and then -override the ``git_multimail.*`` strings like this:: - - import sys # needed for sys.argv - - # Import and customize git_multimail: - import git_multimail - git_multimail.REVISION_INTRO_TEMPLATE = """...""" - git_multimail.COMBINED_INTRO_TEMPLATE = git_multimail.REVISION_INTRO_TEMPLATE - - # start git_multimail itself: - git_multimail.main(sys.argv[1:]) - -The template strings can use any value already used in the existing -templates (read the source code). - -Using HTML in template strings ------------------------------- - -If ``multimailhook.commitEmailFormat`` is set to HTML, then -git-multimail will generate HTML emails for commit notifications. The -log and diff will be formatted automatically by git-multimail. By -default, any HTML special character in the templates will be escaped. - -To use HTML formatting in the introduction of the email, set -``multimailhook.htmlInIntro`` to ``true``. Then, the template can -contain any HTML tags, that will be sent as-is in the email. For -example, to add some formatting and a link to the online commit, use -a format like:: - - git_multimail.REVISION_INTRO_TEMPLATE = """\ - <span style="color:#808080">This is an automated email from the git hooks/post-receive script.</span><br /><br /> - - <strong>%(pusher)s</strong> pushed a commit to %(refname_type)s %(short_refname)s - in repository %(repo_shortname)s.<br /> - - <a href="https://github.com/git-multimail/git-multimail/commit/%(newrev)s">View on GitHub</a>. - """ - -Note that the values expanded from ``%(variable)s`` in the format -strings will still be escaped. - -For a less flexible but easier to set up way to add a link to commit -emails, see ``multimailhook.commitBrowseURL``. - -Similarly, one can set ``multimailhook.htmlInFooter`` and override any -of the ``*_FOOTER*`` template strings. diff --git a/contrib/hooks/multimail/doc/gerrit.rst b/contrib/hooks/multimail/doc/gerrit.rst deleted file mode 100644 index 8011d05dec..0000000000 --- a/contrib/hooks/multimail/doc/gerrit.rst +++ /dev/null @@ -1,56 +0,0 @@ -Setting up git-multimail on Gerrit -================================== - -Gerrit has its own email-sending system, but you may prefer using -``git-multimail`` instead. It supports Gerrit natively as a Gerrit -``ref-updated`` hook (Warning: `Gerrit hooks -<https://gerrit-review.googlesource.com/Documentation/config-hooks.html>`__ -are distinct from Git hooks). Setting up ``git-multimail`` on a Gerrit -installation can be done following the instructions below. - -The explanations show an easy way to set up ``git-multimail``, -but leave ``git-multimail`` installed and unconfigured for a while. If -you run Gerrit on a production server, it is advised that you -execute the step "Set up the hook" last to avoid confusing your users -in the meantime. - -Set up the hook ---------------- - -Create a directory ``$site_path/hooks/`` if it does not exist (if you -don't know what ``$site_path`` is, run ``gerrit.sh status`` and look -for a ``GERRIT_SITE`` line). Either copy ``git_multimail.py`` to -``$site_path/hooks/ref-updated`` or create a wrapper script like -this:: - - #! /bin/sh - exec /path/to/git_multimail.py "$@" - -In both cases, make sure the file is named exactly -``$site_path/hooks/ref-updated`` and is executable. - -(Alternatively, you may configure the ``[hooks]`` section of -gerrit.config) - -Configuration -------------- - -Log on the gerrit server and edit ``$site_path/git/$project/config`` -to configure ``git-multimail``. - -Troubleshooting ---------------- - -Warning: this will disable ``git-multimail`` during the debug, and -could confuse your users. Don't run on a production server. - -To debug configuration issues with ``git-multimail``, you can add the -``--stdout`` option when calling ``git_multimail.py`` like this:: - - #!/bin/sh - exec /path/to/git-multimail/git-multimail/git_multimail.py \ - --stdout "$@" >> /tmp/log.txt - -and try pushing from a test repository. You should see the source of -the email that would have been sent in the output of ``git push`` in -the file ``/tmp/log.txt``. diff --git a/contrib/hooks/multimail/doc/gitolite.rst b/contrib/hooks/multimail/doc/gitolite.rst deleted file mode 100644 index 5054833105..0000000000 --- a/contrib/hooks/multimail/doc/gitolite.rst +++ /dev/null @@ -1,118 +0,0 @@ -Setting up git-multimail on gitolite -==================================== - -``git-multimail`` supports gitolite 3 natively. -The explanations below show an easy way to set up ``git-multimail``, -but leave ``git-multimail`` installed and unconfigured for a while. If -you run gitolite on a production server, it is advised that you -execute the step "Set up the hook" last to avoid confusing your users -in the meantime. - -Set up the hook ---------------- - -Log in as your gitolite user. - -Create a file ``.gitolite/hooks/common/post-receive`` on your gitolite -account containing (adapt the path, obviously):: - - #!/bin/sh - exec /path/to/git-multimail/git-multimail/git_multimail.py "$@" - -Make sure it's executable (``chmod +x``). Record the hook in -gitolite:: - - gitolite setup - -Configuration -------------- - -First, you have to allow the admin to set Git configuration variables. - -As gitolite user, edit the line containing ``GIT_CONFIG_KEYS`` in file -``.gitolite.rc``, to make it look like:: - - GIT_CONFIG_KEYS => 'multimailhook\..*', - -You can now log out and return to your normal user. - -In the ``gitolite-admin`` clone, edit the file ``conf/gitolite.conf`` -and add:: - - repo @all - # Not strictly needed as git_multimail.py will chose gitolite if - # $GL_USER is set. - config multimailhook.environment = gitolite - config multimailhook.mailingList = # Where emails should be sent - config multimailhook.from = # From address to use - -Note that by default, gitolite forbids ``<`` and ``>`` in variable -values (for security/paranoia reasons, see -`compensating for UNSAFE_PATT -<http://gitolite.com/gitolite/git-config/index.html#compensating-for-unsafe95patt>`__ -in gitolite's documentation for explanations and a way to disable -this). As a consequence, you will not be able to use ``First Last -<First.Last@example.com>`` as recipient email, but specifying -``First.Last@example.com`` alone works. - -Obviously, you can customize all parameters on a per-repository basis by -adding these ``config multimailhook.*`` lines in the section -corresponding to a repository or set of repositories. - -To activate ``git-multimail`` on a per-repository basis, do not set -``multimailhook.mailingList`` in the ``@all`` section and set it only -for repositories for which you want ``git-multimail``. - -Alternatively, you can set up the ``From:`` field on a per-user basis -by adding a ``BEGIN USER EMAILS``/``END USER EMAILS`` section (see -``../README``). - -Specificities of Gitolite for Configuration -------------------------------------------- - -Empty configuration variables -............................. - -With gitolite, the syntax ``config multimailhook.commitList = ""`` -unsets the variable instead of setting it to an empty string (see -`here -<http://gitolite.com/gitolite/git-config.html#an-important-warning-about-deleting-a-config-line>`__). -As a result, there is no way to set a variable to the empty string. -In all most places where an empty value is required, git-multimail -now allows to specify special ``"none"`` value (case-sensitive) to -mean the same. - -Alternatively, one can use ``" "`` (a single space) instead of ``""``. -In most cases (in particular ``multimailhook.*List`` variables), this -will be equivalent to an empty string. - -If you have a use-case where ``"none"`` is not an acceptable value and -you need ``" "`` or ``""`` instead, please report it as a bug to -git-multimail. - -Allowing Regular Expressions in Configuration -............................................. - -gitolite has a mechanism to prevent unsafe configuration variable -values, which prevent characters like ``|`` commonly used in regular -expressions. If you do not need the safety feature of gitolite and -need to use regular expressions in your configuration (e.g. for -``multimailhook.refFilter*`` variables), set -`UNSAFE_PATT -<http://gitolite.com/gitolite/git-config.html#unsafe-patt>`__ to a -less restrictive value. - -Troubleshooting ---------------- - -Warning: this will disable ``git-multimail`` during the debug, and -could confuse your users. Don't run on a production server. - -To debug configuration issues with ``git-multimail``, you can add the -``--stdout`` option when calling ``git_multimail.py`` like this:: - - #!/bin/sh - exec /path/to/git-multimail/git-multimail/git_multimail.py --stdout "$@" - -and try pushing from a test repository. You should see the source of -the email that would have been sent in the output of ``git push``. diff --git a/contrib/hooks/multimail/doc/troubleshooting.rst b/contrib/hooks/multimail/doc/troubleshooting.rst deleted file mode 100644 index 651b509ee6..0000000000 --- a/contrib/hooks/multimail/doc/troubleshooting.rst +++ /dev/null @@ -1,78 +0,0 @@ -Troubleshooting issues with git-multimail: a FAQ -================================================ - -How to check that git-multimail is properly set up? ---------------------------------------------------- - -Since version 1.4.0, git-multimail allows a simple self-checking of -its configuration: run it with the environment variable -``GIT_MULTIMAIL_CHECK_SETUP`` set to a non-empty string. You should -get something like this:: - - $ GIT_MULTIMAIL_CHECK_SETUP=true /home/moy/dev/git-multimail/git-multimail/git_multimail.py - Environment values: - administrator : 'the administrator of this repository' - charset : 'utf-8' - emailprefix : '[git-multimail] ' - fqdn : 'anie' - projectdesc : 'UNNAMED PROJECT' - pusher : 'moy' - repo_path : '/home/moy/dev/git-multimail' - repo_shortname : 'git-multimail' - - Now, checking that git-multimail's standard input is properly set ... - Please type some text and then press Return - foo - You have just entered: - foo - git-multimail seems properly set up. - -If you forgot to set an important variable, you may get instead:: - - $ GIT_MULTIMAIL_CHECK_SETUP=true /home/moy/dev/git-multimail/git-multimail/git_multimail.py - No email recipients configured! - -Do not set ``$GIT_MULTIMAIL_CHECK_SETUP`` other than for testing your -configuration: it would disable the hook completely. - -Git is not using the right address in the From/To/Reply-To field ----------------------------------------------------------------- - -First, make sure that git-multimail actually uses what you think it is -using. A lot happens to your email (especially when posting to a -mailing-list) between the time `git_multimail.py` sends it and the -time it reaches your inbox. - -A simple test (to do on a test repository, do not use in production as -it would disable email sending): change your post-receive hook to call -`git_multimail.py` with the `--stdout` option, and try to push to the -repository. You should see something like:: - - Counting objects: 3, done. - Writing objects: 100% (3/3), 263 bytes | 0 bytes/s, done. - Total 3 (delta 0), reused 0 (delta 0) - remote: Sending notification emails to: foo.bar@example.com - remote: =========================================================================== - remote: Date: Mon, 25 Apr 2016 18:39:59 +0200 - remote: To: foo.bar@example.com - remote: Subject: [git] branch master updated: foo - remote: MIME-Version: 1.0 - remote: Content-Type: text/plain; charset=utf-8 - remote: Content-Transfer-Encoding: 8bit - remote: Message-ID: <20160425163959.2311.20498@anie> - remote: From: Auth Or <Foo.Bar@example.com> - remote: Reply-To: Auth Or <Foo.Bar@example.com> - remote: X-Git-Host: example - ... - remote: -- - remote: To stop receiving notification emails like this one, please contact - remote: the administrator of this repository. - remote: =========================================================================== - To /path/to/repo - 6278f04..e173f20 master -> master - -Note: this does not include the sender (Return-Path: header), as it is -not part of the message content but passed to the mailer. Some mailer -show the ``Sender:`` field instead of the ``From:`` field (for -example, Zimbra Webmail shows ``From: <sender-field> on behalf of -<from-field>``). diff --git a/contrib/hooks/multimail/git_multimail.py b/contrib/hooks/multimail/git_multimail.py deleted file mode 100755 index f563be82fc..0000000000 --- a/contrib/hooks/multimail/git_multimail.py +++ /dev/null @@ -1,4346 +0,0 @@ -#! /usr/bin/env python - -__version__ = '1.5.0' - -# Copyright (c) 2015-2016 Matthieu Moy and others -# Copyright (c) 2012-2014 Michael Haggerty and others -# Derived from contrib/hooks/post-receive-email, which is -# Copyright (c) 2007 Andy Parkins -# and also includes contributions by other authors. -# -# This file is part of git-multimail. -# -# git-multimail is free software: you can redistribute it and/or -# modify it under the terms of the GNU General Public License version -# 2 as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see -# <http://www.gnu.org/licenses/>. - -"""Generate notification emails for pushes to a git repository. - -This hook sends emails describing changes introduced by pushes to a -git repository. For each reference that was changed, it emits one -ReferenceChange email summarizing how the reference was changed, -followed by one Revision email for each new commit that was introduced -by the reference change. - -Each commit is announced in exactly one Revision email. If the same -commit is merged into another branch in the same or a later push, then -the ReferenceChange email will list the commit's SHA1 and its one-line -summary, but no new Revision email will be generated. - -This script is designed to be used as a "post-receive" hook in a git -repository (see githooks(5)). It can also be used as an "update" -script, but this usage is not completely reliable and is deprecated. - -To help with debugging, this script accepts a --stdout option, which -causes the emails to be written to standard output rather than sent -using sendmail. - -See the accompanying README file for the complete documentation. - -""" - -import sys -import os -import re -import bisect -import socket -import subprocess -import shlex -import optparse -import logging -import smtplib -try: - import ssl -except ImportError: - # Python < 2.6 do not have ssl, but that's OK if we don't use it. - pass -import time - -import uuid -import base64 - -PYTHON3 = sys.version_info >= (3, 0) - -if sys.version_info <= (2, 5): - def all(iterable): - for element in iterable: - if not element: - return False - return True - - -def is_ascii(s): - return all(ord(c) < 128 and ord(c) > 0 for c in s) - - -if PYTHON3: - def is_string(s): - return isinstance(s, str) - - def str_to_bytes(s): - return s.encode(ENCODING) - - def bytes_to_str(s, errors='strict'): - return s.decode(ENCODING, errors) - - unicode = str - - def write_str(f, msg): - # Try outputting with the default encoding. If it fails, - # try UTF-8. - try: - f.buffer.write(msg.encode(sys.getdefaultencoding())) - except UnicodeEncodeError: - f.buffer.write(msg.encode(ENCODING)) - - def read_line(f): - # Try reading with the default encoding. If it fails, - # try UTF-8. - out = f.buffer.readline() - try: - return out.decode(sys.getdefaultencoding()) - except UnicodeEncodeError: - return out.decode(ENCODING) - - import html - - def html_escape(s): - return html.escape(s) - -else: - def is_string(s): - try: - return isinstance(s, basestring) - except NameError: # Silence Pyflakes warning - raise - - def str_to_bytes(s): - return s - - def bytes_to_str(s, errors='strict'): - return s - - def write_str(f, msg): - f.write(msg) - - def read_line(f): - return f.readline() - - def next(it): - return it.next() - - import cgi - - def html_escape(s): - return cgi.escape(s, True) - -try: - from email.charset import Charset - from email.utils import make_msgid - from email.utils import getaddresses - from email.utils import formataddr - from email.utils import formatdate - from email.header import Header -except ImportError: - # Prior to Python 2.5, the email module used different names: - from email.Charset import Charset - from email.Utils import make_msgid - from email.Utils import getaddresses - from email.Utils import formataddr - from email.Utils import formatdate - from email.Header import Header - - -DEBUG = False - -ZEROS = '0' * 40 -LOGBEGIN = '- Log -----------------------------------------------------------------\n' -LOGEND = '-----------------------------------------------------------------------\n' - -ADDR_HEADERS = set(['from', 'to', 'cc', 'bcc', 'reply-to', 'sender']) - -# It is assumed in many places that the encoding is uniformly UTF-8, -# so changing these constants is unsupported. But define them here -# anyway, to make it easier to find (at least most of) the places -# where the encoding is important. -(ENCODING, CHARSET) = ('UTF-8', 'utf-8') - - -REF_CREATED_SUBJECT_TEMPLATE = ( - '%(emailprefix)s%(refname_type)s %(short_refname)s created' - ' (now %(newrev_short)s)' - ) -REF_UPDATED_SUBJECT_TEMPLATE = ( - '%(emailprefix)s%(refname_type)s %(short_refname)s updated' - ' (%(oldrev_short)s -> %(newrev_short)s)' - ) -REF_DELETED_SUBJECT_TEMPLATE = ( - '%(emailprefix)s%(refname_type)s %(short_refname)s deleted' - ' (was %(oldrev_short)s)' - ) - -COMBINED_REFCHANGE_REVISION_SUBJECT_TEMPLATE = ( - '%(emailprefix)s%(refname_type)s %(short_refname)s updated: %(oneline)s' - ) - -REFCHANGE_HEADER_TEMPLATE = """\ -Date: %(send_date)s -To: %(recipients)s -Subject: %(subject)s -MIME-Version: 1.0 -Content-Type: text/%(contenttype)s; charset=%(charset)s -Content-Transfer-Encoding: 8bit -Message-ID: %(msgid)s -From: %(fromaddr)s -Reply-To: %(reply_to)s -Thread-Index: %(thread_index)s -X-Git-Host: %(fqdn)s -X-Git-Repo: %(repo_shortname)s -X-Git-Refname: %(refname)s -X-Git-Reftype: %(refname_type)s -X-Git-Oldrev: %(oldrev)s -X-Git-Newrev: %(newrev)s -X-Git-NotificationType: ref_changed -X-Git-Multimail-Version: %(multimail_version)s -Auto-Submitted: auto-generated -""" - -REFCHANGE_INTRO_TEMPLATE = """\ -This is an automated email from the git hooks/post-receive script. - -%(pusher)s pushed a change to %(refname_type)s %(short_refname)s -in repository %(repo_shortname)s. - -""" - - -FOOTER_TEMPLATE = """\ - --- \n\ -To stop receiving notification emails like this one, please contact -%(administrator)s. -""" - - -REWIND_ONLY_TEMPLATE = """\ -This update removed existing revisions from the reference, leaving the -reference pointing at a previous point in the repository history. - - * -- * -- N %(refname)s (%(newrev_short)s) - \\ - O -- O -- O (%(oldrev_short)s) - -Any revisions marked "omit" are not gone; other references still -refer to them. Any revisions marked "discard" are gone forever. -""" - - -NON_FF_TEMPLATE = """\ -This update added new revisions after undoing existing revisions. -That is to say, some revisions that were in the old version of the -%(refname_type)s are not in the new version. This situation occurs -when a user --force pushes a change and generates a repository -containing something like this: - - * -- * -- B -- O -- O -- O (%(oldrev_short)s) - \\ - N -- N -- N %(refname)s (%(newrev_short)s) - -You should already have received notification emails for all of the O -revisions, and so the following emails describe only the N revisions -from the common base, B. - -Any revisions marked "omit" are not gone; other references still -refer to them. Any revisions marked "discard" are gone forever. -""" - - -NO_NEW_REVISIONS_TEMPLATE = """\ -No new revisions were added by this update. -""" - - -DISCARDED_REVISIONS_TEMPLATE = """\ -This change permanently discards the following revisions: -""" - - -NO_DISCARDED_REVISIONS_TEMPLATE = """\ -The revisions that were on this %(refname_type)s are still contained in -other references; therefore, this change does not discard any commits -from the repository. -""" - - -NEW_REVISIONS_TEMPLATE = """\ -The %(tot)s revisions listed above as "new" are entirely new to this -repository and will be described in separate emails. The revisions -listed as "add" were already present in the repository and have only -been added to this reference. - -""" - - -TAG_CREATED_TEMPLATE = """\ - at %(newrev_short)-8s (%(newrev_type)s) -""" - - -TAG_UPDATED_TEMPLATE = """\ -*** WARNING: tag %(short_refname)s was modified! *** - - from %(oldrev_short)-8s (%(oldrev_type)s) - to %(newrev_short)-8s (%(newrev_type)s) -""" - - -TAG_DELETED_TEMPLATE = """\ -*** WARNING: tag %(short_refname)s was deleted! *** - -""" - - -# The template used in summary tables. It looks best if this uses the -# same alignment as TAG_CREATED_TEMPLATE and TAG_UPDATED_TEMPLATE. -BRIEF_SUMMARY_TEMPLATE = """\ -%(action)8s %(rev_short)-8s %(text)s -""" - - -NON_COMMIT_UPDATE_TEMPLATE = """\ -This is an unusual reference change because the reference did not -refer to a commit either before or after the change. We do not know -how to provide full information about this reference change. -""" - - -REVISION_HEADER_TEMPLATE = """\ -Date: %(send_date)s -To: %(recipients)s -Cc: %(cc_recipients)s -Subject: %(emailprefix)s%(num)02d/%(tot)02d: %(oneline)s -MIME-Version: 1.0 -Content-Type: text/%(contenttype)s; charset=%(charset)s -Content-Transfer-Encoding: 8bit -From: %(fromaddr)s -Reply-To: %(reply_to)s -In-Reply-To: %(reply_to_msgid)s -References: %(reply_to_msgid)s -Thread-Index: %(thread_index)s -X-Git-Host: %(fqdn)s -X-Git-Repo: %(repo_shortname)s -X-Git-Refname: %(refname)s -X-Git-Reftype: %(refname_type)s -X-Git-Rev: %(rev)s -X-Git-NotificationType: diff -X-Git-Multimail-Version: %(multimail_version)s -Auto-Submitted: auto-generated -""" - -REVISION_INTRO_TEMPLATE = """\ -This is an automated email from the git hooks/post-receive script. - -%(pusher)s pushed a commit to %(refname_type)s %(short_refname)s -in repository %(repo_shortname)s. - -""" - -LINK_TEXT_TEMPLATE = """\ -View the commit online: -%(browse_url)s - -""" - -LINK_HTML_TEMPLATE = """\ -<p><a href="%(browse_url)s">View the commit online</a>.</p> -""" - - -REVISION_FOOTER_TEMPLATE = FOOTER_TEMPLATE - - -# Combined, meaning refchange+revision email (for single-commit additions) -COMBINED_HEADER_TEMPLATE = """\ -Date: %(send_date)s -To: %(recipients)s -Subject: %(subject)s -MIME-Version: 1.0 -Content-Type: text/%(contenttype)s; charset=%(charset)s -Content-Transfer-Encoding: 8bit -Message-ID: %(msgid)s -From: %(fromaddr)s -Reply-To: %(reply_to)s -X-Git-Host: %(fqdn)s -X-Git-Repo: %(repo_shortname)s -X-Git-Refname: %(refname)s -X-Git-Reftype: %(refname_type)s -X-Git-Oldrev: %(oldrev)s -X-Git-Newrev: %(newrev)s -X-Git-Rev: %(rev)s -X-Git-NotificationType: ref_changed_plus_diff -X-Git-Multimail-Version: %(multimail_version)s -Auto-Submitted: auto-generated -""" - -COMBINED_INTRO_TEMPLATE = """\ -This is an automated email from the git hooks/post-receive script. - -%(pusher)s pushed a commit to %(refname_type)s %(short_refname)s -in repository %(repo_shortname)s. - -""" - -COMBINED_FOOTER_TEMPLATE = FOOTER_TEMPLATE - - -class CommandError(Exception): - def __init__(self, cmd, retcode): - self.cmd = cmd - self.retcode = retcode - Exception.__init__( - self, - 'Command "%s" failed with retcode %s' % (' '.join(cmd), retcode,) - ) - - -class ConfigurationException(Exception): - pass - - -# The "git" program (this could be changed to include a full path): -GIT_EXECUTABLE = 'git' - - -# How "git" should be invoked (including global arguments), as a list -# of words. This variable is usually initialized automatically by -# read_git_output() via choose_git_command(), but if a value is set -# here then it will be used unconditionally. -GIT_CMD = None - - -def choose_git_command(): - """Decide how to invoke git, and record the choice in GIT_CMD.""" - - global GIT_CMD - - if GIT_CMD is None: - try: - # Check to see whether the "-c" option is accepted (it was - # only added in Git 1.7.2). We don't actually use the - # output of "git --version", though if we needed more - # specific version information this would be the place to - # do it. - cmd = [GIT_EXECUTABLE, '-c', 'foo.bar=baz', '--version'] - read_output(cmd) - GIT_CMD = [GIT_EXECUTABLE, '-c', 'i18n.logoutputencoding=%s' % (ENCODING,)] - except CommandError: - GIT_CMD = [GIT_EXECUTABLE] - - -def read_git_output(args, input=None, keepends=False, **kw): - """Read the output of a Git command.""" - - if GIT_CMD is None: - choose_git_command() - - return read_output(GIT_CMD + args, input=input, keepends=keepends, **kw) - - -def read_output(cmd, input=None, keepends=False, **kw): - if input: - stdin = subprocess.PIPE - input = str_to_bytes(input) - else: - stdin = None - errors = 'strict' - if 'errors' in kw: - errors = kw['errors'] - del kw['errors'] - p = subprocess.Popen( - tuple(str_to_bytes(w) for w in cmd), - stdin=stdin, stdout=subprocess.PIPE, stderr=subprocess.PIPE, **kw - ) - (out, err) = p.communicate(input) - out = bytes_to_str(out, errors=errors) - retcode = p.wait() - if retcode: - raise CommandError(cmd, retcode) - if not keepends: - out = out.rstrip('\n\r') - return out - - -def read_git_lines(args, keepends=False, **kw): - """Return the lines output by Git command. - - Return as single lines, with newlines stripped off.""" - - return read_git_output(args, keepends=True, **kw).splitlines(keepends) - - -def git_rev_list_ish(cmd, spec, args=None, **kw): - """Common functionality for invoking a 'git rev-list'-like command. - - Parameters: - * cmd is the Git command to run, e.g., 'rev-list' or 'log'. - * spec is a list of revision arguments to pass to the named - command. If None, this function returns an empty list. - * args is a list of extra arguments passed to the named command. - * All other keyword arguments (if any) are passed to the - underlying read_git_lines() function. - - Return the output of the Git command in the form of a list, one - entry per output line. - """ - if spec is None: - return [] - if args is None: - args = [] - args = [cmd, '--stdin'] + args - spec_stdin = ''.join(s + '\n' for s in spec) - return read_git_lines(args, input=spec_stdin, **kw) - - -def git_rev_list(spec, **kw): - """Run 'git rev-list' with the given list of revision arguments. - - See git_rev_list_ish() for parameter and return value - documentation. - """ - return git_rev_list_ish('rev-list', spec, **kw) - - -def git_log(spec, **kw): - """Run 'git log' with the given list of revision arguments. - - See git_rev_list_ish() for parameter and return value - documentation. - """ - return git_rev_list_ish('log', spec, **kw) - - -def header_encode(text, header_name=None): - """Encode and line-wrap the value of an email header field.""" - - # Convert to unicode, if required. - if not isinstance(text, unicode): - text = unicode(text, 'utf-8') - - if is_ascii(text): - charset = 'ascii' - else: - charset = 'utf-8' - - return Header(text, header_name=header_name, charset=Charset(charset)).encode() - - -def addr_header_encode(text, header_name=None): - """Encode and line-wrap the value of an email header field containing - email addresses.""" - - # Convert to unicode, if required. - if not isinstance(text, unicode): - text = unicode(text, 'utf-8') - - text = ', '.join( - formataddr((header_encode(name), emailaddr)) - for name, emailaddr in getaddresses([text]) - ) - - if is_ascii(text): - charset = 'ascii' - else: - charset = 'utf-8' - - return Header(text, header_name=header_name, charset=Charset(charset)).encode() - - -class Config(object): - def __init__(self, section, git_config=None): - """Represent a section of the git configuration. - - If git_config is specified, it is passed to "git config" in - the GIT_CONFIG environment variable, meaning that "git config" - will read the specified path rather than the Git default - config paths.""" - - self.section = section - if git_config: - self.env = os.environ.copy() - self.env['GIT_CONFIG'] = git_config - else: - self.env = None - - @staticmethod - def _split(s): - """Split NUL-terminated values.""" - - words = s.split('\0') - assert words[-1] == '' - return words[:-1] - - @staticmethod - def add_config_parameters(c): - """Add configuration parameters to Git. - - c is either an str or a list of str, each element being of the - form 'var=val' or 'var', with the same syntax and meaning as - the argument of 'git -c var=val'. - """ - if isinstance(c, str): - c = (c,) - parameters = os.environ.get('GIT_CONFIG_PARAMETERS', '') - if parameters: - parameters += ' ' - # git expects GIT_CONFIG_PARAMETERS to be of the form - # "'name1=value1' 'name2=value2' 'name3=value3'" - # including everything inside the double quotes (but not the double - # quotes themselves). Spacing is critical. Also, if a value contains - # a literal single quote that quote must be represented using the - # four character sequence: '\'' - parameters += ' '.join("'" + x.replace("'", "'\\''") + "'" for x in c) - os.environ['GIT_CONFIG_PARAMETERS'] = parameters - - def get(self, name, default=None): - try: - values = self._split(read_git_output( - ['config', '--get', '--null', '%s.%s' % (self.section, name)], - env=self.env, keepends=True, - )) - assert len(values) == 1 - return values[0] - except CommandError: - return default - - def get_bool(self, name, default=None): - try: - value = read_git_output( - ['config', '--get', '--bool', '%s.%s' % (self.section, name)], - env=self.env, - ) - except CommandError: - return default - return value == 'true' - - def get_all(self, name, default=None): - """Read a (possibly multivalued) setting from the configuration. - - Return the result as a list of values, or default if the name - is unset.""" - - try: - return self._split(read_git_output( - ['config', '--get-all', '--null', '%s.%s' % (self.section, name)], - env=self.env, keepends=True, - )) - except CommandError: - t, e, traceback = sys.exc_info() - if e.retcode == 1: - # "the section or key is invalid"; i.e., there is no - # value for the specified key. - return default - else: - raise - - def set(self, name, value): - read_git_output( - ['config', '%s.%s' % (self.section, name), value], - env=self.env, - ) - - def add(self, name, value): - read_git_output( - ['config', '--add', '%s.%s' % (self.section, name), value], - env=self.env, - ) - - def __contains__(self, name): - return self.get_all(name, default=None) is not None - - # We don't use this method anymore internally, but keep it here in - # case somebody is calling it from their own code: - def has_key(self, name): - return name in self - - def unset_all(self, name): - try: - read_git_output( - ['config', '--unset-all', '%s.%s' % (self.section, name)], - env=self.env, - ) - except CommandError: - t, e, traceback = sys.exc_info() - if e.retcode == 5: - # The name doesn't exist, which is what we wanted anyway... - pass - else: - raise - - def set_recipients(self, name, value): - self.unset_all(name) - for pair in getaddresses([value]): - self.add(name, formataddr(pair)) - - -def generate_summaries(*log_args): - """Generate a brief summary for each revision requested. - - log_args are strings that will be passed directly to "git log" as - revision selectors. Iterate over (sha1_short, subject) for each - commit specified by log_args (subject is the first line of the - commit message as a string without EOLs).""" - - cmd = [ - 'log', '--abbrev', '--format=%h %s', - ] + list(log_args) + ['--'] - for line in read_git_lines(cmd): - yield tuple(line.split(' ', 1)) - - -def limit_lines(lines, max_lines): - for (index, line) in enumerate(lines): - if index < max_lines: - yield line - - if index >= max_lines: - yield '... %d lines suppressed ...\n' % (index + 1 - max_lines,) - - -def limit_linelength(lines, max_linelength): - for line in lines: - # Don't forget that lines always include a trailing newline. - if len(line) > max_linelength + 1: - line = line[:max_linelength - 7] + ' [...]\n' - yield line - - -class CommitSet(object): - """A (constant) set of object names. - - The set should be initialized with full SHA1 object names. The - __contains__() method returns True iff its argument is an - abbreviation of any the names in the set.""" - - def __init__(self, names): - self._names = sorted(names) - - def __len__(self): - return len(self._names) - - def __contains__(self, sha1_abbrev): - """Return True iff this set contains sha1_abbrev (which might be abbreviated).""" - - i = bisect.bisect_left(self._names, sha1_abbrev) - return i < len(self) and self._names[i].startswith(sha1_abbrev) - - -class GitObject(object): - def __init__(self, sha1, type=None): - if sha1 == ZEROS: - self.sha1 = self.type = self.commit_sha1 = None - else: - self.sha1 = sha1 - self.type = type or read_git_output(['cat-file', '-t', self.sha1]) - - if self.type == 'commit': - self.commit_sha1 = self.sha1 - elif self.type == 'tag': - try: - self.commit_sha1 = read_git_output( - ['rev-parse', '--verify', '%s^0' % (self.sha1,)] - ) - except CommandError: - # Cannot deref tag to determine commit_sha1 - self.commit_sha1 = None - else: - self.commit_sha1 = None - - self.short = read_git_output(['rev-parse', '--short', sha1]) - - def get_summary(self): - """Return (sha1_short, subject) for this commit.""" - - if not self.sha1: - raise ValueError('Empty commit has no summary') - - return next(iter(generate_summaries('--no-walk', self.sha1))) - - def __eq__(self, other): - return isinstance(other, GitObject) and self.sha1 == other.sha1 - - def __ne__(self, other): - return not self == other - - def __hash__(self): - return hash(self.sha1) - - def __nonzero__(self): - return bool(self.sha1) - - def __bool__(self): - """Python 2 backward compatibility""" - return self.__nonzero__() - - def __str__(self): - return self.sha1 or ZEROS - - -class Change(object): - """A Change that has been made to the Git repository. - - Abstract class from which both Revisions and ReferenceChanges are - derived. A Change knows how to generate a notification email - describing itself.""" - - def __init__(self, environment): - self.environment = environment - self._values = None - self._contains_html_diff = False - - def _contains_diff(self): - # We do contain a diff, should it be rendered in HTML? - if self.environment.commit_email_format == "html": - self._contains_html_diff = True - - def _compute_values(self): - """Return a dictionary {keyword: expansion} for this Change. - - Derived classes overload this method to add more entries to - the return value. This method is used internally by - get_values(). The return value should always be a new - dictionary.""" - - values = self.environment.get_values() - fromaddr = self.environment.get_fromaddr(change=self) - if fromaddr is not None: - values['fromaddr'] = fromaddr - values['multimail_version'] = get_version() - return values - - # Aliases usable in template strings. Tuple of pairs (destination, - # source). - VALUES_ALIAS = ( - ("id", "newrev"), - ) - - def get_values(self, **extra_values): - """Return a dictionary {keyword: expansion} for this Change. - - Return a dictionary mapping keywords to the values that they - should be expanded to for this Change (used when interpolating - template strings). If any keyword arguments are supplied, add - those to the return value as well. The return value is always - a new dictionary.""" - - if self._values is None: - self._values = self._compute_values() - - values = self._values.copy() - if extra_values: - values.update(extra_values) - - for alias, val in self.VALUES_ALIAS: - values[alias] = values[val] - return values - - def expand(self, template, **extra_values): - """Expand template. - - Expand the template (which should be a string) using string - interpolation of the values for this Change. If any keyword - arguments are provided, also include those in the keywords - available for interpolation.""" - - return template % self.get_values(**extra_values) - - def expand_lines(self, template, html_escape_val=False, **extra_values): - """Break template into lines and expand each line.""" - - values = self.get_values(**extra_values) - if html_escape_val: - for k in values: - if is_string(values[k]): - values[k] = html_escape(values[k]) - for line in template.splitlines(True): - yield line % values - - def expand_header_lines(self, template, **extra_values): - """Break template into lines and expand each line as an RFC 2822 header. - - Encode values and split up lines that are too long. Silently - skip lines that contain references to unknown variables.""" - - values = self.get_values(**extra_values) - if self._contains_html_diff: - self._content_type = 'html' - else: - self._content_type = 'plain' - values['contenttype'] = self._content_type - - for line in template.splitlines(): - (name, value) = line.split(': ', 1) - - try: - value = value % values - except KeyError: - t, e, traceback = sys.exc_info() - if DEBUG: - self.environment.log_warning( - 'Warning: unknown variable %r in the following line; line skipped:\n' - ' %s\n' - % (e.args[0], line,) - ) - else: - if name.lower() in ADDR_HEADERS: - value = addr_header_encode(value, name) - else: - value = header_encode(value, name) - for splitline in ('%s: %s\n' % (name, value)).splitlines(True): - yield splitline - - def generate_email_header(self): - """Generate the RFC 2822 email headers for this Change, a line at a time. - - The output should not include the trailing blank line.""" - - raise NotImplementedError() - - def generate_browse_link(self, base_url): - """Generate a link to an online repository browser.""" - return iter(()) - - def generate_email_intro(self, html_escape_val=False): - """Generate the email intro for this Change, a line at a time. - - The output will be used as the standard boilerplate at the top - of the email body.""" - - raise NotImplementedError() - - def generate_email_body(self, push): - """Generate the main part of the email body, a line at a time. - - The text in the body might be truncated after a specified - number of lines (see multimailhook.emailmaxlines).""" - - raise NotImplementedError() - - def generate_email_footer(self, html_escape_val): - """Generate the footer of the email, a line at a time. - - The footer is always included, irrespective of - multimailhook.emailmaxlines.""" - - raise NotImplementedError() - - def _wrap_for_html(self, lines): - """Wrap the lines in HTML <pre> tag when using HTML format. - - Escape special HTML characters and add <pre> and </pre> tags around - the given lines if we should be generating HTML as indicated by - self._contains_html_diff being set to true. - """ - if self._contains_html_diff: - yield "<pre style='margin:0'>\n" - - for line in lines: - yield html_escape(line) - - yield '</pre>\n' - else: - for line in lines: - yield line - - def generate_email(self, push, body_filter=None, extra_header_values={}): - """Generate an email describing this change. - - Iterate over the lines (including the header lines) of an - email describing this change. If body_filter is not None, - then use it to filter the lines that are intended for the - email body. - - The extra_header_values field is received as a dict and not as - **kwargs, to allow passing other keyword arguments in the - future (e.g. passing extra values to generate_email_intro()""" - - for line in self.generate_email_header(**extra_header_values): - yield line - yield '\n' - html_escape_val = (self.environment.html_in_intro and - self._contains_html_diff) - intro = self.generate_email_intro(html_escape_val) - if not self.environment.html_in_intro: - intro = self._wrap_for_html(intro) - for line in intro: - yield line - - if self.environment.commitBrowseURL: - for line in self.generate_browse_link(self.environment.commitBrowseURL): - yield line - - body = self.generate_email_body(push) - if body_filter is not None: - body = body_filter(body) - - diff_started = False - if self._contains_html_diff: - # "white-space: pre" is the default, but we need to - # specify it again in case the message is viewed in a - # webmail which wraps it in an element setting white-space - # to something else (Zimbra does this and sets - # white-space: pre-line). - yield '<pre style="white-space: pre; background: #F8F8F8">' - for line in body: - if self._contains_html_diff: - # This is very, very naive. It would be much better to really - # parse the diff, i.e. look at how many lines do we have in - # the hunk headers instead of blindly highlighting everything - # that looks like it might be part of a diff. - bgcolor = '' - fgcolor = '' - if line.startswith('--- a/'): - diff_started = True - bgcolor = 'e0e0ff' - elif line.startswith('diff ') or line.startswith('index '): - diff_started = True - fgcolor = '808080' - elif diff_started: - if line.startswith('+++ '): - bgcolor = 'e0e0ff' - elif line.startswith('@@'): - bgcolor = 'e0e0e0' - elif line.startswith('+'): - bgcolor = 'e0ffe0' - elif line.startswith('-'): - bgcolor = 'ffe0e0' - elif line.startswith('commit '): - fgcolor = '808000' - elif line.startswith(' '): - fgcolor = '404040' - - # Chop the trailing LF, we don't want it inside <pre>. - line = html_escape(line[:-1]) - - if bgcolor or fgcolor: - style = 'display:block; white-space:pre;' - if bgcolor: - style += 'background:#' + bgcolor + ';' - if fgcolor: - style += 'color:#' + fgcolor + ';' - # Use a <span style='display:block> to color the - # whole line. The newline must be inside the span - # to display properly both in Firefox and in - # text-based browser. - line = "<span style='%s'>%s\n</span>" % (style, line) - else: - line = line + '\n' - - yield line - if self._contains_html_diff: - yield '</pre>' - html_escape_val = (self.environment.html_in_footer and - self._contains_html_diff) - footer = self.generate_email_footer(html_escape_val) - if not self.environment.html_in_footer: - footer = self._wrap_for_html(footer) - for line in footer: - yield line - - def get_specific_fromaddr(self): - """For kinds of Changes which specify it, return the kind-specific - From address to use.""" - return None - - -class Revision(Change): - """A Change consisting of a single git commit.""" - - CC_RE = re.compile(r'^\s*C[Cc]:\s*(?P<to>[^#]+@[^\s#]*)\s*(#.*)?$') - - def __init__(self, reference_change, rev, num, tot): - Change.__init__(self, reference_change.environment) - self.reference_change = reference_change - self.rev = rev - self.change_type = self.reference_change.change_type - self.refname = self.reference_change.refname - self.num = num - self.tot = tot - self.author = read_git_output(['log', '--no-walk', '--format=%aN <%aE>', self.rev.sha1]) - self.recipients = self.environment.get_revision_recipients(self) - - # -s is short for --no-patch, but -s works on older git's (e.g. 1.7) - self.parents = read_git_lines(['show', '-s', '--format=%P', - self.rev.sha1])[0].split() - - self.cc_recipients = '' - if self.environment.get_scancommitforcc(): - self.cc_recipients = ', '.join(to.strip() for to in self._cc_recipients()) - if self.cc_recipients: - self.environment.log_msg( - 'Add %s to CC for %s' % (self.cc_recipients, self.rev.sha1)) - - def _cc_recipients(self): - cc_recipients = [] - message = read_git_output(['log', '--no-walk', '--format=%b', self.rev.sha1]) - lines = message.strip().split('\n') - for line in lines: - m = re.match(self.CC_RE, line) - if m: - cc_recipients.append(m.group('to')) - - return cc_recipients - - def _compute_values(self): - values = Change._compute_values(self) - - oneline = read_git_output( - ['log', '--format=%s', '--no-walk', self.rev.sha1] - ) - - max_subject_length = self.environment.get_max_subject_length() - if max_subject_length > 0 and len(oneline) > max_subject_length: - oneline = oneline[:max_subject_length - 6] + ' [...]' - - values['rev'] = self.rev.sha1 - values['parents'] = ' '.join(self.parents) - values['rev_short'] = self.rev.short - values['change_type'] = self.change_type - values['refname'] = self.refname - values['newrev'] = self.rev.sha1 - values['short_refname'] = self.reference_change.short_refname - values['refname_type'] = self.reference_change.refname_type - values['reply_to_msgid'] = self.reference_change.msgid - values['thread_index'] = self.reference_change.thread_index - values['num'] = self.num - values['tot'] = self.tot - values['recipients'] = self.recipients - if self.cc_recipients: - values['cc_recipients'] = self.cc_recipients - values['oneline'] = oneline - values['author'] = self.author - - reply_to = self.environment.get_reply_to_commit(self) - if reply_to: - values['reply_to'] = reply_to - - return values - - def generate_email_header(self, **extra_values): - for line in self.expand_header_lines( - REVISION_HEADER_TEMPLATE, **extra_values - ): - yield line - - def generate_browse_link(self, base_url): - if '%(' not in base_url: - base_url += '%(id)s' - url = "".join(self.expand_lines(base_url)) - if self._content_type == 'html': - for line in self.expand_lines(LINK_HTML_TEMPLATE, - html_escape_val=True, - browse_url=url): - yield line - elif self._content_type == 'plain': - for line in self.expand_lines(LINK_TEXT_TEMPLATE, - html_escape_val=False, - browse_url=url): - yield line - else: - raise NotImplementedError("Content-type %s unsupported. Please report it as a bug.") - - def generate_email_intro(self, html_escape_val=False): - for line in self.expand_lines(REVISION_INTRO_TEMPLATE, - html_escape_val=html_escape_val): - yield line - - def generate_email_body(self, push): - """Show this revision.""" - - for line in read_git_lines( - ['log'] + self.environment.commitlogopts + ['-1', self.rev.sha1], - keepends=True, - errors='replace'): - if line.startswith('Date: ') and self.environment.date_substitute: - yield self.environment.date_substitute + line[len('Date: '):] - else: - yield line - - def generate_email_footer(self, html_escape_val): - return self.expand_lines(REVISION_FOOTER_TEMPLATE, - html_escape_val=html_escape_val) - - def generate_email(self, push, body_filter=None, extra_header_values={}): - self._contains_diff() - return Change.generate_email(self, push, body_filter, extra_header_values) - - def get_specific_fromaddr(self): - return self.environment.from_commit - - -class ReferenceChange(Change): - """A Change to a Git reference. - - An abstract class representing a create, update, or delete of a - Git reference. Derived classes handle specific types of reference - (e.g., tags vs. branches). These classes generate the main - reference change email summarizing the reference change and - whether it caused any any commits to be added or removed. - - ReferenceChange objects are usually created using the static - create() method, which has the logic to decide which derived class - to instantiate.""" - - REF_RE = re.compile(r'^refs\/(?P<area>[^\/]+)\/(?P<shortname>.*)$') - - @staticmethod - def create(environment, oldrev, newrev, refname): - """Return a ReferenceChange object representing the change. - - Return an object that represents the type of change that is being - made. oldrev and newrev should be SHA1s or ZEROS.""" - - old = GitObject(oldrev) - new = GitObject(newrev) - rev = new or old - - # The revision type tells us what type the commit is, combined with - # the location of the ref we can decide between - # - working branch - # - tracking branch - # - unannotated tag - # - annotated tag - m = ReferenceChange.REF_RE.match(refname) - if m: - area = m.group('area') - short_refname = m.group('shortname') - else: - area = '' - short_refname = refname - - if rev.type == 'tag': - # Annotated tag: - klass = AnnotatedTagChange - elif rev.type == 'commit': - if area == 'tags': - # Non-annotated tag: - klass = NonAnnotatedTagChange - elif area == 'heads': - # Branch: - klass = BranchChange - elif area == 'remotes': - # Tracking branch: - environment.log_warning( - '*** Push-update of tracking branch %r\n' - '*** - incomplete email generated.' - % (refname,) - ) - klass = OtherReferenceChange - else: - # Some other reference namespace: - environment.log_warning( - '*** Push-update of strange reference %r\n' - '*** - incomplete email generated.' - % (refname,) - ) - klass = OtherReferenceChange - else: - # Anything else (is there anything else?) - environment.log_warning( - '*** Unknown type of update to %r (%s)\n' - '*** - incomplete email generated.' - % (refname, rev.type,) - ) - klass = OtherReferenceChange - - return klass( - environment, - refname=refname, short_refname=short_refname, - old=old, new=new, rev=rev, - ) - - @staticmethod - def make_thread_index(): - """Return a string appropriate for the Thread-Index header, - needed by MS Outlook to get threading right. - - The format is (base64-encoded): - - 1 byte must be 1 - - 5 bytes encode a date (hardcoded here) - - 16 bytes for a globally unique identifier - - FIXME: Unfortunately, even with the Thread-Index field, MS - Outlook doesn't seem to do the threading reliably (see - https://github.com/git-multimail/git-multimail/pull/194). - """ - thread_index = b'\x01\x00\x00\x12\x34\x56' + uuid.uuid4().bytes - return base64.standard_b64encode(thread_index).decode('ascii') - - def __init__(self, environment, refname, short_refname, old, new, rev): - Change.__init__(self, environment) - self.change_type = { - (False, True): 'create', - (True, True): 'update', - (True, False): 'delete', - }[bool(old), bool(new)] - self.refname = refname - self.short_refname = short_refname - self.old = old - self.new = new - self.rev = rev - self.msgid = make_msgid() - self.thread_index = self.make_thread_index() - self.diffopts = environment.diffopts - self.graphopts = environment.graphopts - self.logopts = environment.logopts - self.commitlogopts = environment.commitlogopts - self.showgraph = environment.refchange_showgraph - self.showlog = environment.refchange_showlog - - self.header_template = REFCHANGE_HEADER_TEMPLATE - self.intro_template = REFCHANGE_INTRO_TEMPLATE - self.footer_template = FOOTER_TEMPLATE - - def _compute_values(self): - values = Change._compute_values(self) - - values['change_type'] = self.change_type - values['refname_type'] = self.refname_type - values['refname'] = self.refname - values['short_refname'] = self.short_refname - values['msgid'] = self.msgid - values['thread_index'] = self.thread_index - values['recipients'] = self.recipients - values['oldrev'] = str(self.old) - values['oldrev_short'] = self.old.short - values['newrev'] = str(self.new) - values['newrev_short'] = self.new.short - - if self.old: - values['oldrev_type'] = self.old.type - if self.new: - values['newrev_type'] = self.new.type - - reply_to = self.environment.get_reply_to_refchange(self) - if reply_to: - values['reply_to'] = reply_to - - return values - - def send_single_combined_email(self, known_added_sha1s): - """Determine if a combined refchange/revision email should be sent - - If there is only a single new (non-merge) commit added by a - change, it is useful to combine the ReferenceChange and - Revision emails into one. In such a case, return the single - revision; otherwise, return None. - - This method is overridden in BranchChange.""" - - return None - - def generate_combined_email(self, push, revision, body_filter=None, extra_header_values={}): - """Generate an email describing this change AND specified revision. - - Iterate over the lines (including the header lines) of an - email describing this change. If body_filter is not None, - then use it to filter the lines that are intended for the - email body. - - The extra_header_values field is received as a dict and not as - **kwargs, to allow passing other keyword arguments in the - future (e.g. passing extra values to generate_email_intro() - - This method is overridden in BranchChange.""" - - raise NotImplementedError - - def get_subject(self): - template = { - 'create': REF_CREATED_SUBJECT_TEMPLATE, - 'update': REF_UPDATED_SUBJECT_TEMPLATE, - 'delete': REF_DELETED_SUBJECT_TEMPLATE, - }[self.change_type] - return self.expand(template) - - def generate_email_header(self, **extra_values): - if 'subject' not in extra_values: - extra_values['subject'] = self.get_subject() - - for line in self.expand_header_lines( - self.header_template, **extra_values - ): - yield line - - def generate_email_intro(self, html_escape_val=False): - for line in self.expand_lines(self.intro_template, - html_escape_val=html_escape_val): - yield line - - def generate_email_body(self, push): - """Call the appropriate body-generation routine. - - Call one of generate_create_summary() / - generate_update_summary() / generate_delete_summary().""" - - change_summary = { - 'create': self.generate_create_summary, - 'delete': self.generate_delete_summary, - 'update': self.generate_update_summary, - }[self.change_type](push) - for line in change_summary: - yield line - - for line in self.generate_revision_change_summary(push): - yield line - - def generate_email_footer(self, html_escape_val): - return self.expand_lines(self.footer_template, - html_escape_val=html_escape_val) - - def generate_revision_change_graph(self, push): - if self.showgraph: - args = ['--graph'] + self.graphopts - for newold in ('new', 'old'): - has_newold = False - spec = push.get_commits_spec(newold, self) - for line in git_log(spec, args=args, keepends=True): - if not has_newold: - has_newold = True - yield '\n' - yield 'Graph of %s commits:\n\n' % ( - {'new': 'new', 'old': 'discarded'}[newold],) - yield ' ' + line - if has_newold: - yield '\n' - - def generate_revision_change_log(self, new_commits_list): - if self.showlog: - yield '\n' - yield 'Detailed log of new commits:\n\n' - for line in read_git_lines( - ['log', '--no-walk'] + - self.logopts + - new_commits_list + - ['--'], - keepends=True, - ): - yield line - - def generate_new_revision_summary(self, tot, new_commits_list, push): - for line in self.expand_lines(NEW_REVISIONS_TEMPLATE, tot=tot): - yield line - for line in self.generate_revision_change_graph(push): - yield line - for line in self.generate_revision_change_log(new_commits_list): - yield line - - def generate_revision_change_summary(self, push): - """Generate a summary of the revisions added/removed by this change.""" - - if self.new.commit_sha1 and not self.old.commit_sha1: - # A new reference was created. List the new revisions - # brought by the new reference (i.e., those revisions that - # were not in the repository before this reference - # change). - sha1s = list(push.get_new_commits(self)) - sha1s.reverse() - tot = len(sha1s) - new_revisions = [ - Revision(self, GitObject(sha1), num=i + 1, tot=tot) - for (i, sha1) in enumerate(sha1s) - ] - - if new_revisions: - yield self.expand('This %(refname_type)s includes the following new commits:\n') - yield '\n' - for r in new_revisions: - (sha1, subject) = r.rev.get_summary() - yield r.expand( - BRIEF_SUMMARY_TEMPLATE, action='new', text=subject, - ) - yield '\n' - for line in self.generate_new_revision_summary( - tot, [r.rev.sha1 for r in new_revisions], push): - yield line - else: - for line in self.expand_lines(NO_NEW_REVISIONS_TEMPLATE): - yield line - - elif self.new.commit_sha1 and self.old.commit_sha1: - # A reference was changed to point at a different commit. - # List the revisions that were removed and/or added *from - # that reference* by this reference change, along with a - # diff between the trees for its old and new values. - - # List of the revisions that were added to the branch by - # this update. Note this list can include revisions that - # have already had notification emails; we want such - # revisions in the summary even though we will not send - # new notification emails for them. - adds = list(generate_summaries( - '--topo-order', '--reverse', '%s..%s' - % (self.old.commit_sha1, self.new.commit_sha1,) - )) - - # List of the revisions that were removed from the branch - # by this update. This will be empty except for - # non-fast-forward updates. - discards = list(generate_summaries( - '%s..%s' % (self.new.commit_sha1, self.old.commit_sha1,) - )) - - if adds: - new_commits_list = push.get_new_commits(self) - else: - new_commits_list = [] - new_commits = CommitSet(new_commits_list) - - if discards: - discarded_commits = CommitSet(push.get_discarded_commits(self)) - else: - discarded_commits = CommitSet([]) - - if discards and adds: - for (sha1, subject) in discards: - if sha1 in discarded_commits: - action = 'discard' - else: - action = 'omit' - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action=action, - rev_short=sha1, text=subject, - ) - for (sha1, subject) in adds: - if sha1 in new_commits: - action = 'new' - else: - action = 'add' - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action=action, - rev_short=sha1, text=subject, - ) - yield '\n' - for line in self.expand_lines(NON_FF_TEMPLATE): - yield line - - elif discards: - for (sha1, subject) in discards: - if sha1 in discarded_commits: - action = 'discard' - else: - action = 'omit' - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action=action, - rev_short=sha1, text=subject, - ) - yield '\n' - for line in self.expand_lines(REWIND_ONLY_TEMPLATE): - yield line - - elif adds: - (sha1, subject) = self.old.get_summary() - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action='from', - rev_short=sha1, text=subject, - ) - for (sha1, subject) in adds: - if sha1 in new_commits: - action = 'new' - else: - action = 'add' - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action=action, - rev_short=sha1, text=subject, - ) - - yield '\n' - - if new_commits: - for line in self.generate_new_revision_summary( - len(new_commits), new_commits_list, push): - yield line - else: - for line in self.expand_lines(NO_NEW_REVISIONS_TEMPLATE): - yield line - for line in self.generate_revision_change_graph(push): - yield line - - # The diffstat is shown from the old revision to the new - # revision. This is to show the truth of what happened in - # this change. There's no point showing the stat from the - # base to the new revision because the base is effectively a - # random revision at this point - the user will be interested - # in what this revision changed - including the undoing of - # previous revisions in the case of non-fast-forward updates. - yield '\n' - yield 'Summary of changes:\n' - for line in read_git_lines( - ['diff-tree'] + - self.diffopts + - ['%s..%s' % (self.old.commit_sha1, self.new.commit_sha1,)], - keepends=True, - ): - yield line - - elif self.old.commit_sha1 and not self.new.commit_sha1: - # A reference was deleted. List the revisions that were - # removed from the repository by this reference change. - - sha1s = list(push.get_discarded_commits(self)) - tot = len(sha1s) - discarded_revisions = [ - Revision(self, GitObject(sha1), num=i + 1, tot=tot) - for (i, sha1) in enumerate(sha1s) - ] - - if discarded_revisions: - for line in self.expand_lines(DISCARDED_REVISIONS_TEMPLATE): - yield line - yield '\n' - for r in discarded_revisions: - (sha1, subject) = r.rev.get_summary() - yield r.expand( - BRIEF_SUMMARY_TEMPLATE, action='discard', text=subject, - ) - for line in self.generate_revision_change_graph(push): - yield line - else: - for line in self.expand_lines(NO_DISCARDED_REVISIONS_TEMPLATE): - yield line - - elif not self.old.commit_sha1 and not self.new.commit_sha1: - for line in self.expand_lines(NON_COMMIT_UPDATE_TEMPLATE): - yield line - - def generate_create_summary(self, push): - """Called for the creation of a reference.""" - - # This is a new reference and so oldrev is not valid - (sha1, subject) = self.new.get_summary() - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action='at', - rev_short=sha1, text=subject, - ) - yield '\n' - - def generate_update_summary(self, push): - """Called for the change of a pre-existing branch.""" - - return iter([]) - - def generate_delete_summary(self, push): - """Called for the deletion of any type of reference.""" - - (sha1, subject) = self.old.get_summary() - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action='was', - rev_short=sha1, text=subject, - ) - yield '\n' - - def get_specific_fromaddr(self): - return self.environment.from_refchange - - -class BranchChange(ReferenceChange): - refname_type = 'branch' - - def __init__(self, environment, refname, short_refname, old, new, rev): - ReferenceChange.__init__( - self, environment, - refname=refname, short_refname=short_refname, - old=old, new=new, rev=rev, - ) - self.recipients = environment.get_refchange_recipients(self) - self._single_revision = None - - def send_single_combined_email(self, known_added_sha1s): - if not self.environment.combine_when_single_commit: - return None - - # In the sadly-all-too-frequent usecase of people pushing only - # one of their commits at a time to a repository, users feel - # the reference change summary emails are noise rather than - # important signal. This is because, in this particular - # usecase, there is a reference change summary email for each - # new commit, and all these summaries do is point out that - # there is one new commit (which can readily be inferred by - # the existence of the individual revision email that is also - # sent). In such cases, our users prefer there to be a combined - # reference change summary/new revision email. - # - # So, if the change is an update and it doesn't discard any - # commits, and it adds exactly one non-merge commit (gerrit - # forces a workflow where every commit is individually merged - # and the git-multimail hook fired off for just this one - # change), then we send a combined refchange/revision email. - try: - # If this change is a reference update that doesn't discard - # any commits... - if self.change_type != 'update': - return None - - if read_git_lines( - ['merge-base', self.old.sha1, self.new.sha1] - ) != [self.old.sha1]: - return None - - # Check if this update introduced exactly one non-merge - # commit: - - def split_line(line): - """Split line into (sha1, [parent,...]).""" - - words = line.split() - return (words[0], words[1:]) - - # Get the new commits introduced by the push as a list of - # (sha1, [parent,...]) - new_commits = [ - split_line(line) - for line in read_git_lines( - [ - 'log', '-3', '--format=%H %P', - '%s..%s' % (self.old.sha1, self.new.sha1), - ] - ) - ] - - if not new_commits: - return None - - # If the newest commit is a merge, save it for a later check - # but otherwise ignore it - merge = None - tot = len(new_commits) - if len(new_commits[0][1]) > 1: - merge = new_commits[0][0] - del new_commits[0] - - # Our primary check: we can't combine if more than one commit - # is introduced. We also currently only combine if the new - # commit is a non-merge commit, though it may make sense to - # combine if it is a merge as well. - if not ( - len(new_commits) == 1 and - len(new_commits[0][1]) == 1 and - new_commits[0][0] in known_added_sha1s - ): - return None - - # We do not want to combine revision and refchange emails if - # those go to separate locations. - rev = Revision(self, GitObject(new_commits[0][0]), 1, tot) - if rev.recipients != self.recipients: - return None - - # We ignored the newest commit if it was just a merge of the one - # commit being introduced. But we don't want to ignore that - # merge commit it it involved conflict resolutions. Check that. - if merge and merge != read_git_output(['diff-tree', '--cc', merge]): - return None - - # We can combine the refchange and one new revision emails - # into one. Return the Revision that a combined email should - # be sent about. - return rev - except CommandError: - # Cannot determine number of commits in old..new or new..old; - # don't combine reference/revision emails: - return None - - def generate_combined_email(self, push, revision, body_filter=None, extra_header_values={}): - values = revision.get_values() - if extra_header_values: - values.update(extra_header_values) - if 'subject' not in extra_header_values: - values['subject'] = self.expand(COMBINED_REFCHANGE_REVISION_SUBJECT_TEMPLATE, **values) - - self._single_revision = revision - self._contains_diff() - self.header_template = COMBINED_HEADER_TEMPLATE - self.intro_template = COMBINED_INTRO_TEMPLATE - self.footer_template = COMBINED_FOOTER_TEMPLATE - - def revision_gen_link(base_url): - # revision is used only to generate the body, and - # _content_type is set while generating headers. Get it - # from the BranchChange object. - revision._content_type = self._content_type - return revision.generate_browse_link(base_url) - self.generate_browse_link = revision_gen_link - for line in self.generate_email(push, body_filter, values): - yield line - - def generate_email_body(self, push): - '''Call the appropriate body generation routine. - - If this is a combined refchange/revision email, the special logic - for handling this combined email comes from this function. For - other cases, we just use the normal handling.''' - - # If self._single_revision isn't set; don't override - if not self._single_revision: - for line in super(BranchChange, self).generate_email_body(push): - yield line - return - - # This is a combined refchange/revision email; we first provide - # some info from the refchange portion, and then call the revision - # generate_email_body function to handle the revision portion. - adds = list(generate_summaries( - '--topo-order', '--reverse', '%s..%s' - % (self.old.commit_sha1, self.new.commit_sha1,) - )) - - yield self.expand("The following commit(s) were added to %(refname)s by this push:\n") - for (sha1, subject) in adds: - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action='new', - rev_short=sha1, text=subject, - ) - - yield self._single_revision.rev.short + " is described below\n" - yield '\n' - - for line in self._single_revision.generate_email_body(push): - yield line - - -class AnnotatedTagChange(ReferenceChange): - refname_type = 'annotated tag' - - def __init__(self, environment, refname, short_refname, old, new, rev): - ReferenceChange.__init__( - self, environment, - refname=refname, short_refname=short_refname, - old=old, new=new, rev=rev, - ) - self.recipients = environment.get_announce_recipients(self) - self.show_shortlog = environment.announce_show_shortlog - - ANNOTATED_TAG_FORMAT = ( - '%(*objectname)\n' - '%(*objecttype)\n' - '%(taggername)\n' - '%(taggerdate)' - ) - - def describe_tag(self, push): - """Describe the new value of an annotated tag.""" - - # Use git for-each-ref to pull out the individual fields from - # the tag - [tagobject, tagtype, tagger, tagged] = read_git_lines( - ['for-each-ref', '--format=%s' % (self.ANNOTATED_TAG_FORMAT,), self.refname], - ) - - yield self.expand( - BRIEF_SUMMARY_TEMPLATE, action='tagging', - rev_short=tagobject, text='(%s)' % (tagtype,), - ) - if tagtype == 'commit': - # If the tagged object is a commit, then we assume this is a - # release, and so we calculate which tag this tag is - # replacing - try: - prevtag = read_git_output(['describe', '--abbrev=0', '%s^' % (self.new,)]) - except CommandError: - prevtag = None - if prevtag: - yield ' replaces %s\n' % (prevtag,) - else: - prevtag = None - yield ' length %s bytes\n' % (read_git_output(['cat-file', '-s', tagobject]),) - - yield ' by %s\n' % (tagger,) - yield ' on %s\n' % (tagged,) - yield '\n' - - # Show the content of the tag message; this might contain a - # change log or release notes so is worth displaying. - yield LOGBEGIN - contents = list(read_git_lines(['cat-file', 'tag', self.new.sha1], keepends=True)) - contents = contents[contents.index('\n') + 1:] - if contents and contents[-1][-1:] != '\n': - contents.append('\n') - for line in contents: - yield line - - if self.show_shortlog and tagtype == 'commit': - # Only commit tags make sense to have rev-list operations - # performed on them - yield '\n' - if prevtag: - # Show changes since the previous release - revlist = read_git_output( - ['rev-list', '--pretty=short', '%s..%s' % (prevtag, self.new,)], - keepends=True, - ) - else: - # No previous tag, show all the changes since time - # began - revlist = read_git_output( - ['rev-list', '--pretty=short', '%s' % (self.new,)], - keepends=True, - ) - for line in read_git_lines(['shortlog'], input=revlist, keepends=True): - yield line - - yield LOGEND - yield '\n' - - def generate_create_summary(self, push): - """Called for the creation of an annotated tag.""" - - for line in self.expand_lines(TAG_CREATED_TEMPLATE): - yield line - - for line in self.describe_tag(push): - yield line - - def generate_update_summary(self, push): - """Called for the update of an annotated tag. - - This is probably a rare event and may not even be allowed.""" - - for line in self.expand_lines(TAG_UPDATED_TEMPLATE): - yield line - - for line in self.describe_tag(push): - yield line - - def generate_delete_summary(self, push): - """Called when a non-annotated reference is updated.""" - - for line in self.expand_lines(TAG_DELETED_TEMPLATE): - yield line - - yield self.expand(' tag was %(oldrev_short)s\n') - yield '\n' - - -class NonAnnotatedTagChange(ReferenceChange): - refname_type = 'tag' - - def __init__(self, environment, refname, short_refname, old, new, rev): - ReferenceChange.__init__( - self, environment, - refname=refname, short_refname=short_refname, - old=old, new=new, rev=rev, - ) - self.recipients = environment.get_refchange_recipients(self) - - def generate_create_summary(self, push): - """Called for the creation of an annotated tag.""" - - for line in self.expand_lines(TAG_CREATED_TEMPLATE): - yield line - - def generate_update_summary(self, push): - """Called when a non-annotated reference is updated.""" - - for line in self.expand_lines(TAG_UPDATED_TEMPLATE): - yield line - - def generate_delete_summary(self, push): - """Called when a non-annotated reference is updated.""" - - for line in self.expand_lines(TAG_DELETED_TEMPLATE): - yield line - - for line in ReferenceChange.generate_delete_summary(self, push): - yield line - - -class OtherReferenceChange(ReferenceChange): - refname_type = 'reference' - - def __init__(self, environment, refname, short_refname, old, new, rev): - # We use the full refname as short_refname, because otherwise - # the full name of the reference would not be obvious from the - # text of the email. - ReferenceChange.__init__( - self, environment, - refname=refname, short_refname=refname, - old=old, new=new, rev=rev, - ) - self.recipients = environment.get_refchange_recipients(self) - - -class Mailer(object): - """An object that can send emails.""" - - def __init__(self, environment): - self.environment = environment - - def close(self): - pass - - def send(self, lines, to_addrs): - """Send an email consisting of lines. - - lines must be an iterable over the lines constituting the - header and body of the email. to_addrs is a list of recipient - addresses (can be needed even if lines already contains a - "To:" field). It can be either a string (comma-separated list - of email addresses) or a Python list of individual email - addresses. - - """ - - raise NotImplementedError() - - -class SendMailer(Mailer): - """Send emails using 'sendmail -oi -t'.""" - - SENDMAIL_CANDIDATES = [ - '/usr/sbin/sendmail', - '/usr/lib/sendmail', - ] - - @staticmethod - def find_sendmail(): - for path in SendMailer.SENDMAIL_CANDIDATES: - if os.access(path, os.X_OK): - return path - else: - raise ConfigurationException( - 'No sendmail executable found. ' - 'Try setting multimailhook.sendmailCommand.' - ) - - def __init__(self, environment, command=None, envelopesender=None): - """Construct a SendMailer instance. - - command should be the command and arguments used to invoke - sendmail, as a list of strings. If an envelopesender is - provided, it will also be passed to the command, via '-f - envelopesender'.""" - super(SendMailer, self).__init__(environment) - if command: - self.command = command[:] - else: - self.command = [self.find_sendmail(), '-oi', '-t'] - - if envelopesender: - self.command.extend(['-f', envelopesender]) - - def send(self, lines, to_addrs): - try: - p = subprocess.Popen(self.command, stdin=subprocess.PIPE) - except OSError: - self.environment.get_logger().error( - '*** Cannot execute command: %s\n' % ' '.join(self.command) + - '*** %s\n' % sys.exc_info()[1] + - '*** Try setting multimailhook.mailer to "smtp"\n' + - '*** to send emails without using the sendmail command.\n' - ) - sys.exit(1) - try: - lines = (str_to_bytes(line) for line in lines) - p.stdin.writelines(lines) - except Exception: - self.environment.get_logger().error( - '*** Error while generating commit email\n' - '*** - mail sending aborted.\n' - ) - if hasattr(p, 'terminate'): - # subprocess.terminate() is not available in Python 2.4 - p.terminate() - else: - import signal - os.kill(p.pid, signal.SIGTERM) - raise - else: - p.stdin.close() - retcode = p.wait() - if retcode: - raise CommandError(self.command, retcode) - - -class SMTPMailer(Mailer): - """Send emails using Python's smtplib.""" - - def __init__(self, environment, - envelopesender, smtpserver, - smtpservertimeout=10.0, smtpserverdebuglevel=0, - smtpencryption='none', - smtpuser='', smtppass='', - smtpcacerts='' - ): - super(SMTPMailer, self).__init__(environment) - if not envelopesender: - self.environment.get_logger().error( - 'fatal: git_multimail: cannot use SMTPMailer without a sender address.\n' - 'please set either multimailhook.envelopeSender or user.email\n' - ) - sys.exit(1) - if smtpencryption == 'ssl' and not (smtpuser and smtppass): - raise ConfigurationException( - 'Cannot use SMTPMailer with security option ssl ' - 'without options username and password.' - ) - self.envelopesender = envelopesender - self.smtpserver = smtpserver - self.smtpservertimeout = smtpservertimeout - self.smtpserverdebuglevel = smtpserverdebuglevel - self.security = smtpencryption - self.username = smtpuser - self.password = smtppass - self.smtpcacerts = smtpcacerts - self.loggedin = False - try: - def call(klass, server, timeout): - try: - return klass(server, timeout=timeout) - except TypeError: - # Old Python versions do not have timeout= argument. - return klass(server) - if self.security == 'none': - self.smtp = call(smtplib.SMTP, self.smtpserver, timeout=self.smtpservertimeout) - elif self.security == 'ssl': - if self.smtpcacerts: - raise smtplib.SMTPException( - "Checking certificate is not supported for ssl, prefer starttls" - ) - self.smtp = call(smtplib.SMTP_SSL, self.smtpserver, timeout=self.smtpservertimeout) - elif self.security == 'tls': - if 'ssl' not in sys.modules: - self.environment.get_logger().error( - '*** Your Python version does not have the ssl library installed\n' - '*** smtpEncryption=tls is not available.\n' - '*** Either upgrade Python to 2.6 or later\n' - ' or use git_multimail.py version 1.2.\n') - if ':' not in self.smtpserver: - self.smtpserver += ':587' # default port for TLS - self.smtp = call(smtplib.SMTP, self.smtpserver, timeout=self.smtpservertimeout) - # start: ehlo + starttls - # equivalent to - # self.smtp.ehlo() - # self.smtp.starttls() - # with access to the ssl layer - self.smtp.ehlo() - if not self.smtp.has_extn("starttls"): - raise smtplib.SMTPException("STARTTLS extension not supported by server") - resp, reply = self.smtp.docmd("STARTTLS") - if resp != 220: - raise smtplib.SMTPException("Wrong answer to the STARTTLS command") - if self.smtpcacerts: - self.smtp.sock = ssl.wrap_socket( - self.smtp.sock, - ca_certs=self.smtpcacerts, - cert_reqs=ssl.CERT_REQUIRED - ) - else: - self.smtp.sock = ssl.wrap_socket( - self.smtp.sock, - cert_reqs=ssl.CERT_NONE - ) - self.environment.get_logger().error( - '*** Warning, the server certificate is not verified (smtp) ***\n' - '*** set the option smtpCACerts ***\n' - ) - if not hasattr(self.smtp.sock, "read"): - # using httplib.FakeSocket with Python 2.5.x or earlier - self.smtp.sock.read = self.smtp.sock.recv - self.smtp.file = smtplib.SSLFakeFile(self.smtp.sock) - self.smtp.helo_resp = None - self.smtp.ehlo_resp = None - self.smtp.esmtp_features = {} - self.smtp.does_esmtp = 0 - # end: ehlo + starttls - self.smtp.ehlo() - else: - sys.stdout.write('*** Error: Control reached an invalid option. ***') - sys.exit(1) - if self.smtpserverdebuglevel > 0: - sys.stdout.write( - "*** Setting debug on for SMTP server connection (%s) ***\n" - % self.smtpserverdebuglevel) - self.smtp.set_debuglevel(self.smtpserverdebuglevel) - except Exception: - self.environment.get_logger().error( - '*** Error establishing SMTP connection to %s ***\n' - '*** %s\n' - % (self.smtpserver, sys.exc_info()[1])) - sys.exit(1) - - def close(self): - if hasattr(self, 'smtp'): - self.smtp.quit() - del self.smtp - - def __del__(self): - self.close() - - def send(self, lines, to_addrs): - try: - if self.username or self.password: - if not self.loggedin: - self.smtp.login(self.username, self.password) - self.loggedin = True - msg = ''.join(lines) - # turn comma-separated list into Python list if needed. - if is_string(to_addrs): - to_addrs = [email for (name, email) in getaddresses([to_addrs])] - self.smtp.sendmail(self.envelopesender, to_addrs, msg) - except socket.timeout: - self.environment.get_logger().error( - '*** Error sending email ***\n' - '*** SMTP server timed out (timeout is %s)\n' - % self.smtpservertimeout) - except smtplib.SMTPResponseException: - err = sys.exc_info()[1] - self.environment.get_logger().error( - '*** Error sending email ***\n' - '*** Error %d: %s\n' - % (err.smtp_code, bytes_to_str(err.smtp_error))) - try: - smtp = self.smtp - # delete the field before quit() so that in case of - # error, self.smtp is deleted anyway. - del self.smtp - smtp.quit() - except: - self.environment.get_logger().error( - '*** Error closing the SMTP connection ***\n' - '*** Exiting anyway ... ***\n' - '*** %s\n' % sys.exc_info()[1]) - sys.exit(1) - - -class OutputMailer(Mailer): - """Write emails to an output stream, bracketed by lines of '=' characters. - - This is intended for debugging purposes.""" - - SEPARATOR = '=' * 75 + '\n' - - def __init__(self, f, environment=None): - super(OutputMailer, self).__init__(environment=environment) - self.f = f - - def send(self, lines, to_addrs): - write_str(self.f, self.SEPARATOR) - for line in lines: - write_str(self.f, line) - write_str(self.f, self.SEPARATOR) - - -def get_git_dir(): - """Determine GIT_DIR. - - Determine GIT_DIR either from the GIT_DIR environment variable or - from the working directory, using Git's usual rules.""" - - try: - return read_git_output(['rev-parse', '--git-dir']) - except CommandError: - sys.stderr.write('fatal: git_multimail: not in a git directory\n') - sys.exit(1) - - -class Environment(object): - """Describes the environment in which the push is occurring. - - An Environment object encapsulates information about the local - environment. For example, it knows how to determine: - - * the name of the repository to which the push occurred - - * what user did the push - - * what users want to be informed about various types of changes. - - An Environment object is expected to have the following methods: - - get_repo_shortname() - - Return a short name for the repository, for display - purposes. - - get_repo_path() - - Return the absolute path to the Git repository. - - get_emailprefix() - - Return a string that will be prefixed to every email's - subject. - - get_pusher() - - Return the username of the person who pushed the changes. - This value is used in the email body to indicate who - pushed the change. - - get_pusher_email() (may return None) - - Return the email address of the person who pushed the - changes. The value should be a single RFC 2822 email - address as a string; e.g., "Joe User <user@example.com>" - if available, otherwise "user@example.com". If set, the - value is used as the Reply-To address for refchange - emails. If it is impossible to determine the pusher's - email, this attribute should be set to None (in which case - no Reply-To header will be output). - - get_sender() - - Return the address to be used as the 'From' email address - in the email envelope. - - get_fromaddr(change=None) - - Return the 'From' email address used in the email 'From:' - headers. If the change is known when this function is - called, it is passed in as the 'change' parameter. (May - be a full RFC 2822 email address like 'Joe User - <user@example.com>'.) - - get_administrator() - - Return the name and/or email of the repository - administrator. This value is used in the footer as the - person to whom requests to be removed from the - notification list should be sent. Ideally, it should - include a valid email address. - - get_reply_to_refchange() - get_reply_to_commit() - - Return the address to use in the email "Reply-To" header, - as a string. These can be an RFC 2822 email address, or - None to omit the "Reply-To" header. - get_reply_to_refchange() is used for refchange emails; - get_reply_to_commit() is used for individual commit - emails. - - get_ref_filter_regex() - - Return a tuple -- a compiled regex, and a boolean indicating - whether the regex picks refs to include (if False, the regex - matches on refs to exclude). - - get_default_ref_ignore_regex() - - Return a regex that should be ignored for both what emails - to send and when computing what commits are considered new - to the repository. Default is "^refs/notes/". - - get_max_subject_length() - - Return an int giving the maximal length for the subject - (git log --oneline). - - They should also define the following attributes: - - announce_show_shortlog (bool) - - True iff announce emails should include a shortlog. - - commit_email_format (string) - - If "html", generate commit emails in HTML instead of plain text - used by default. - - html_in_intro (bool) - html_in_footer (bool) - - When generating HTML emails, the introduction (respectively, - the footer) will be HTML-escaped iff html_in_intro (respectively, - the footer) is true. When false, only the values used to expand - the template are escaped. - - refchange_showgraph (bool) - - True iff refchanges emails should include a detailed graph. - - refchange_showlog (bool) - - True iff refchanges emails should include a detailed log. - - diffopts (list of strings) - - The options that should be passed to 'git diff' for the - summary email. The value should be a list of strings - representing words to be passed to the command. - - graphopts (list of strings) - - Analogous to diffopts, but contains options passed to - 'git log --graph' when generating the detailed graph for - a set of commits (see refchange_showgraph) - - logopts (list of strings) - - Analogous to diffopts, but contains options passed to - 'git log' when generating the detailed log for a set of - commits (see refchange_showlog) - - commitlogopts (list of strings) - - The options that should be passed to 'git log' for each - commit mail. The value should be a list of strings - representing words to be passed to the command. - - date_substitute (string) - - String to be used in substitution for 'Date:' at start of - line in the output of 'git log'. - - quiet (bool) - On success do not write to stderr - - stdout (bool) - Write email to stdout rather than emailing. Useful for debugging - - combine_when_single_commit (bool) - - True if a combined email should be produced when a single - new commit is pushed to a branch, False otherwise. - - from_refchange, from_commit (strings) - - Addresses to use for the From: field for refchange emails - and commit emails respectively. Set from - multimailhook.fromRefchange and multimailhook.fromCommit - by ConfigEnvironmentMixin. - - log_file, error_log_file, debug_log_file (string) - - Name of a file to which logs should be sent. - - verbose (int) - - How verbose the system should be. - - 0 (default): show info, errors, ... - - 1 : show basic debug info - """ - - REPO_NAME_RE = re.compile(r'^(?P<name>.+?)(?:\.git)$') - - def __init__(self, osenv=None): - self.osenv = osenv or os.environ - self.announce_show_shortlog = False - self.commit_email_format = "text" - self.html_in_intro = False - self.html_in_footer = False - self.commitBrowseURL = None - self.maxcommitemails = 500 - self.excludemergerevisions = False - self.diffopts = ['--stat', '--summary', '--find-copies-harder'] - self.graphopts = ['--oneline', '--decorate'] - self.logopts = [] - self.refchange_showgraph = False - self.refchange_showlog = False - self.commitlogopts = ['-C', '--stat', '-p', '--cc'] - self.date_substitute = 'AuthorDate: ' - self.quiet = False - self.stdout = False - self.combine_when_single_commit = True - self.logger = None - - self.COMPUTED_KEYS = [ - 'administrator', - 'charset', - 'emailprefix', - 'pusher', - 'pusher_email', - 'repo_path', - 'repo_shortname', - 'sender', - ] - - self._values = None - - def get_logger(self): - """Get (possibly creates) the logger associated to this environment.""" - if self.logger is None: - self.logger = Logger(self) - return self.logger - - def get_repo_shortname(self): - """Use the last part of the repo path, with ".git" stripped off if present.""" - - basename = os.path.basename(os.path.abspath(self.get_repo_path())) - m = self.REPO_NAME_RE.match(basename) - if m: - return m.group('name') - else: - return basename - - def get_pusher(self): - raise NotImplementedError() - - def get_pusher_email(self): - return None - - def get_fromaddr(self, change=None): - config = Config('user') - fromname = config.get('name', default='') - fromemail = config.get('email', default='') - if fromemail: - return formataddr([fromname, fromemail]) - return self.get_sender() - - def get_administrator(self): - return 'the administrator of this repository' - - def get_emailprefix(self): - return '' - - def get_repo_path(self): - if read_git_output(['rev-parse', '--is-bare-repository']) == 'true': - path = get_git_dir() - else: - path = read_git_output(['rev-parse', '--show-toplevel']) - return os.path.abspath(path) - - def get_charset(self): - return CHARSET - - def get_values(self): - """Return a dictionary {keyword: expansion} for this Environment. - - This method is called by Change._compute_values(). The keys - in the returned dictionary are available to be used in any of - the templates. The dictionary is created by calling - self.get_NAME() for each of the attributes named in - COMPUTED_KEYS and recording those that do not return None. - The return value is always a new dictionary.""" - - if self._values is None: - values = {'': ''} # %()s expands to the empty string. - - for key in self.COMPUTED_KEYS: - value = getattr(self, 'get_%s' % (key,))() - if value is not None: - values[key] = value - - self._values = values - - return self._values.copy() - - def get_refchange_recipients(self, refchange): - """Return the recipients for notifications about refchange. - - Return the list of email addresses to which notifications - about the specified ReferenceChange should be sent.""" - - raise NotImplementedError() - - def get_announce_recipients(self, annotated_tag_change): - """Return the recipients for notifications about annotated_tag_change. - - Return the list of email addresses to which notifications - about the specified AnnotatedTagChange should be sent.""" - - raise NotImplementedError() - - def get_reply_to_refchange(self, refchange): - return self.get_pusher_email() - - def get_revision_recipients(self, revision): - """Return the recipients for messages about revision. - - Return the list of email addresses to which notifications - about the specified Revision should be sent. This method - could be overridden, for example, to take into account the - contents of the revision when deciding whom to notify about - it. For example, there could be a scheme for users to express - interest in particular files or subdirectories, and only - receive notification emails for revisions that affecting those - files.""" - - raise NotImplementedError() - - def get_reply_to_commit(self, revision): - return revision.author - - def get_default_ref_ignore_regex(self): - # The commit messages of git notes are essentially meaningless - # and "filenames" in git notes commits are an implementational - # detail that might surprise users at first. As such, we - # would need a completely different method for handling emails - # of git notes in order for them to be of benefit for users, - # which we simply do not have right now. - return "^refs/notes/" - - def get_max_subject_length(self): - """Return the maximal subject line (git log --oneline) length. - Longer subject lines will be truncated.""" - raise NotImplementedError() - - def filter_body(self, lines): - """Filter the lines intended for an email body. - - lines is an iterable over the lines that would go into the - email body. Filter it (e.g., limit the number of lines, the - line length, character set, etc.), returning another iterable. - See FilterLinesEnvironmentMixin and MaxlinesEnvironmentMixin - for classes implementing this functionality.""" - - return lines - - def log_msg(self, msg): - """Write the string msg on a log file or on stderr. - - Sends the text to stderr by default, override to change the behavior.""" - self.get_logger().info(msg) - - def log_warning(self, msg): - """Write the string msg on a log file or on stderr. - - Sends the text to stderr by default, override to change the behavior.""" - self.get_logger().warning(msg) - - def log_error(self, msg): - """Write the string msg on a log file or on stderr. - - Sends the text to stderr by default, override to change the behavior.""" - self.get_logger().error(msg) - - def check(self): - pass - - -class ConfigEnvironmentMixin(Environment): - """A mixin that sets self.config to its constructor's config argument. - - This class's constructor consumes the "config" argument. - - Mixins that need to inspect the config should inherit from this - class (1) to make sure that "config" is still in the constructor - arguments with its own constructor runs and/or (2) to be sure that - self.config is set after construction.""" - - def __init__(self, config, **kw): - super(ConfigEnvironmentMixin, self).__init__(**kw) - self.config = config - - -class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin): - """An Environment that reads most of its information from "git config".""" - - @staticmethod - def forbid_field_values(name, value, forbidden): - for forbidden_val in forbidden: - if value is not None and value.lower() == forbidden: - raise ConfigurationException( - '"%s" is not an allowed setting for %s' % (value, name) - ) - - def __init__(self, config, **kw): - super(ConfigOptionsEnvironmentMixin, self).__init__( - config=config, **kw - ) - - for var, cfg in ( - ('announce_show_shortlog', 'announceshortlog'), - ('refchange_showgraph', 'refchangeShowGraph'), - ('refchange_showlog', 'refchangeshowlog'), - ('quiet', 'quiet'), - ('stdout', 'stdout'), - ): - val = config.get_bool(cfg) - if val is not None: - setattr(self, var, val) - - commit_email_format = config.get('commitEmailFormat') - if commit_email_format is not None: - if commit_email_format != "html" and commit_email_format != "text": - self.log_warning( - '*** Unknown value for multimailhook.commitEmailFormat: %s\n' % - commit_email_format + - '*** Expected either "text" or "html". Ignoring.\n' - ) - else: - self.commit_email_format = commit_email_format - - html_in_intro = config.get_bool('htmlInIntro') - if html_in_intro is not None: - self.html_in_intro = html_in_intro - - html_in_footer = config.get_bool('htmlInFooter') - if html_in_footer is not None: - self.html_in_footer = html_in_footer - - self.commitBrowseURL = config.get('commitBrowseURL') - - self.excludemergerevisions = config.get('excludeMergeRevisions') - - maxcommitemails = config.get('maxcommitemails') - if maxcommitemails is not None: - try: - self.maxcommitemails = int(maxcommitemails) - except ValueError: - self.log_warning( - '*** Malformed value for multimailhook.maxCommitEmails: %s\n' - % maxcommitemails + - '*** Expected a number. Ignoring.\n' - ) - - diffopts = config.get('diffopts') - if diffopts is not None: - self.diffopts = shlex.split(diffopts) - - graphopts = config.get('graphOpts') - if graphopts is not None: - self.graphopts = shlex.split(graphopts) - - logopts = config.get('logopts') - if logopts is not None: - self.logopts = shlex.split(logopts) - - commitlogopts = config.get('commitlogopts') - if commitlogopts is not None: - self.commitlogopts = shlex.split(commitlogopts) - - date_substitute = config.get('dateSubstitute') - if date_substitute == 'none': - self.date_substitute = None - elif date_substitute is not None: - self.date_substitute = date_substitute - - reply_to = config.get('replyTo') - self.__reply_to_refchange = config.get('replyToRefchange', default=reply_to) - self.forbid_field_values('replyToRefchange', - self.__reply_to_refchange, - ['author']) - self.__reply_to_commit = config.get('replyToCommit', default=reply_to) - - self.from_refchange = config.get('fromRefchange') - self.forbid_field_values('fromRefchange', - self.from_refchange, - ['author', 'none']) - self.from_commit = config.get('fromCommit') - self.forbid_field_values('fromCommit', - self.from_commit, - ['none']) - - combine = config.get_bool('combineWhenSingleCommit') - if combine is not None: - self.combine_when_single_commit = combine - - self.log_file = config.get('logFile', default=None) - self.error_log_file = config.get('errorLogFile', default=None) - self.debug_log_file = config.get('debugLogFile', default=None) - if config.get_bool('Verbose', default=False): - self.verbose = 1 - else: - self.verbose = 0 - - def get_administrator(self): - return ( - self.config.get('administrator') or - self.get_sender() or - super(ConfigOptionsEnvironmentMixin, self).get_administrator() - ) - - def get_repo_shortname(self): - return ( - self.config.get('reponame') or - super(ConfigOptionsEnvironmentMixin, self).get_repo_shortname() - ) - - def get_emailprefix(self): - emailprefix = self.config.get('emailprefix') - if emailprefix is not None: - emailprefix = emailprefix.strip() - if emailprefix: - emailprefix += ' ' - else: - emailprefix = '[%(repo_shortname)s] ' - short_name = self.get_repo_shortname() - try: - return emailprefix % {'repo_shortname': short_name} - except: - self.get_logger().error( - '*** Invalid multimailhook.emailPrefix: %s\n' % emailprefix + - '*** %s\n' % sys.exc_info()[1] + - "*** Only the '%(repo_shortname)s' placeholder is allowed\n" - ) - raise ConfigurationException( - '"%s" is not an allowed setting for emailPrefix' % emailprefix - ) - - def get_sender(self): - return self.config.get('envelopesender') - - def process_addr(self, addr, change): - if addr.lower() == 'author': - if hasattr(change, 'author'): - return change.author - else: - return None - elif addr.lower() == 'pusher': - return self.get_pusher_email() - elif addr.lower() == 'none': - return None - else: - return addr - - def get_fromaddr(self, change=None): - fromaddr = self.config.get('from') - if change: - specific_fromaddr = change.get_specific_fromaddr() - if specific_fromaddr: - fromaddr = specific_fromaddr - if fromaddr: - fromaddr = self.process_addr(fromaddr, change) - if fromaddr: - return fromaddr - return super(ConfigOptionsEnvironmentMixin, self).get_fromaddr(change) - - def get_reply_to_refchange(self, refchange): - if self.__reply_to_refchange is None: - return super(ConfigOptionsEnvironmentMixin, self).get_reply_to_refchange(refchange) - else: - return self.process_addr(self.__reply_to_refchange, refchange) - - def get_reply_to_commit(self, revision): - if self.__reply_to_commit is None: - return super(ConfigOptionsEnvironmentMixin, self).get_reply_to_commit(revision) - else: - return self.process_addr(self.__reply_to_commit, revision) - - def get_scancommitforcc(self): - return self.config.get('scancommitforcc') - - -class FilterLinesEnvironmentMixin(Environment): - """Handle encoding and maximum line length of body lines. - - email_max_line_length (int or None) - - The maximum length of any single line in the email body. - Longer lines are truncated at that length with ' [...]' - appended. - - strict_utf8 (bool) - - If this field is set to True, then the email body text is - expected to be UTF-8. Any invalid characters are - converted to U+FFFD, the Unicode replacement character - (encoded as UTF-8, of course). - - """ - - def __init__(self, strict_utf8=True, - email_max_line_length=500, max_subject_length=500, - **kw): - super(FilterLinesEnvironmentMixin, self).__init__(**kw) - self.__strict_utf8 = strict_utf8 - self.__email_max_line_length = email_max_line_length - self.__max_subject_length = max_subject_length - - def filter_body(self, lines): - lines = super(FilterLinesEnvironmentMixin, self).filter_body(lines) - if self.__strict_utf8: - if not PYTHON3: - lines = (line.decode(ENCODING, 'replace') for line in lines) - # Limit the line length in Unicode-space to avoid - # splitting characters: - if self.__email_max_line_length > 0: - lines = limit_linelength(lines, self.__email_max_line_length) - if not PYTHON3: - lines = (line.encode(ENCODING, 'replace') for line in lines) - elif self.__email_max_line_length: - lines = limit_linelength(lines, self.__email_max_line_length) - - return lines - - def get_max_subject_length(self): - return self.__max_subject_length - - -class ConfigFilterLinesEnvironmentMixin( - ConfigEnvironmentMixin, - FilterLinesEnvironmentMixin, - ): - """Handle encoding and maximum line length based on config.""" - - def __init__(self, config, **kw): - strict_utf8 = config.get_bool('emailstrictutf8', default=None) - if strict_utf8 is not None: - kw['strict_utf8'] = strict_utf8 - - email_max_line_length = config.get('emailmaxlinelength') - if email_max_line_length is not None: - kw['email_max_line_length'] = int(email_max_line_length) - - max_subject_length = config.get('subjectMaxLength', default=email_max_line_length) - if max_subject_length is not None: - kw['max_subject_length'] = int(max_subject_length) - - super(ConfigFilterLinesEnvironmentMixin, self).__init__( - config=config, **kw - ) - - -class MaxlinesEnvironmentMixin(Environment): - """Limit the email body to a specified number of lines.""" - - def __init__(self, emailmaxlines, **kw): - super(MaxlinesEnvironmentMixin, self).__init__(**kw) - self.__emailmaxlines = emailmaxlines - - def filter_body(self, lines): - lines = super(MaxlinesEnvironmentMixin, self).filter_body(lines) - if self.__emailmaxlines > 0: - lines = limit_lines(lines, self.__emailmaxlines) - return lines - - -class ConfigMaxlinesEnvironmentMixin( - ConfigEnvironmentMixin, - MaxlinesEnvironmentMixin, - ): - """Limit the email body to the number of lines specified in config.""" - - def __init__(self, config, **kw): - emailmaxlines = int(config.get('emailmaxlines', default='0')) - super(ConfigMaxlinesEnvironmentMixin, self).__init__( - config=config, - emailmaxlines=emailmaxlines, - **kw - ) - - -class FQDNEnvironmentMixin(Environment): - """A mixin that sets the host's FQDN to its constructor argument.""" - - def __init__(self, fqdn, **kw): - super(FQDNEnvironmentMixin, self).__init__(**kw) - self.COMPUTED_KEYS += ['fqdn'] - self.__fqdn = fqdn - - def get_fqdn(self): - """Return the fully-qualified domain name for this host. - - Return None if it is unavailable or unwanted.""" - - return self.__fqdn - - -class ConfigFQDNEnvironmentMixin( - ConfigEnvironmentMixin, - FQDNEnvironmentMixin, - ): - """Read the FQDN from the config.""" - - def __init__(self, config, **kw): - fqdn = config.get('fqdn') - super(ConfigFQDNEnvironmentMixin, self).__init__( - config=config, - fqdn=fqdn, - **kw - ) - - -class ComputeFQDNEnvironmentMixin(FQDNEnvironmentMixin): - """Get the FQDN by calling socket.getfqdn().""" - - def __init__(self, **kw): - super(ComputeFQDNEnvironmentMixin, self).__init__( - fqdn=socket.getfqdn(), - **kw - ) - - -class PusherDomainEnvironmentMixin(ConfigEnvironmentMixin): - """Deduce pusher_email from pusher by appending an emaildomain.""" - - def __init__(self, **kw): - super(PusherDomainEnvironmentMixin, self).__init__(**kw) - self.__emaildomain = self.config.get('emaildomain') - - def get_pusher_email(self): - if self.__emaildomain: - # Derive the pusher's full email address in the default way: - return '%s@%s' % (self.get_pusher(), self.__emaildomain) - else: - return super(PusherDomainEnvironmentMixin, self).get_pusher_email() - - -class StaticRecipientsEnvironmentMixin(Environment): - """Set recipients statically based on constructor parameters.""" - - def __init__( - self, - refchange_recipients, announce_recipients, revision_recipients, scancommitforcc, - **kw - ): - super(StaticRecipientsEnvironmentMixin, self).__init__(**kw) - - # The recipients for various types of notification emails, as - # RFC 2822 email addresses separated by commas (or the empty - # string if no recipients are configured). Although there is - # a mechanism to choose the recipient lists based on on the - # actual *contents* of the change being reported, we only - # choose based on the *type* of the change. Therefore we can - # compute them once and for all: - self.__refchange_recipients = refchange_recipients - self.__announce_recipients = announce_recipients - self.__revision_recipients = revision_recipients - - def check(self): - if not (self.get_refchange_recipients(None) or - self.get_announce_recipients(None) or - self.get_revision_recipients(None) or - self.get_scancommitforcc()): - raise ConfigurationException('No email recipients configured!') - super(StaticRecipientsEnvironmentMixin, self).check() - - def get_refchange_recipients(self, refchange): - if self.__refchange_recipients is None: - return super(StaticRecipientsEnvironmentMixin, - self).get_refchange_recipients(refchange) - return self.__refchange_recipients - - def get_announce_recipients(self, annotated_tag_change): - if self.__announce_recipients is None: - return super(StaticRecipientsEnvironmentMixin, - self).get_refchange_recipients(annotated_tag_change) - return self.__announce_recipients - - def get_revision_recipients(self, revision): - if self.__revision_recipients is None: - return super(StaticRecipientsEnvironmentMixin, - self).get_refchange_recipients(revision) - return self.__revision_recipients - - -class CLIRecipientsEnvironmentMixin(Environment): - """Mixin storing recipients information coming from the - command-line.""" - - def __init__(self, cli_recipients=None, **kw): - super(CLIRecipientsEnvironmentMixin, self).__init__(**kw) - self.__cli_recipients = cli_recipients - - def get_refchange_recipients(self, refchange): - if self.__cli_recipients is None: - return super(CLIRecipientsEnvironmentMixin, - self).get_refchange_recipients(refchange) - return self.__cli_recipients - - def get_announce_recipients(self, annotated_tag_change): - if self.__cli_recipients is None: - return super(CLIRecipientsEnvironmentMixin, - self).get_announce_recipients(annotated_tag_change) - return self.__cli_recipients - - def get_revision_recipients(self, revision): - if self.__cli_recipients is None: - return super(CLIRecipientsEnvironmentMixin, - self).get_revision_recipients(revision) - return self.__cli_recipients - - -class ConfigRecipientsEnvironmentMixin( - ConfigEnvironmentMixin, - StaticRecipientsEnvironmentMixin - ): - """Determine recipients statically based on config.""" - - def __init__(self, config, **kw): - super(ConfigRecipientsEnvironmentMixin, self).__init__( - config=config, - refchange_recipients=self._get_recipients( - config, 'refchangelist', 'mailinglist', - ), - announce_recipients=self._get_recipients( - config, 'announcelist', 'refchangelist', 'mailinglist', - ), - revision_recipients=self._get_recipients( - config, 'commitlist', 'mailinglist', - ), - scancommitforcc=config.get('scancommitforcc'), - **kw - ) - - def _get_recipients(self, config, *names): - """Return the recipients for a particular type of message. - - Return the list of email addresses to which a particular type - of notification email should be sent, by looking at the config - value for "multimailhook.$name" for each of names. Use the - value from the first name that is configured. The return - value is a (possibly empty) string containing RFC 2822 email - addresses separated by commas. If no configuration could be - found, raise a ConfigurationException.""" - - for name in names: - lines = config.get_all(name) - if lines is not None: - lines = [line.strip() for line in lines] - # Single "none" is a special value equivalen to empty string. - if lines == ['none']: - lines = [''] - return ', '.join(lines) - else: - return '' - - -class StaticRefFilterEnvironmentMixin(Environment): - """Set branch filter statically based on constructor parameters.""" - - def __init__(self, ref_filter_incl_regex, ref_filter_excl_regex, - ref_filter_do_send_regex, ref_filter_dont_send_regex, - **kw): - super(StaticRefFilterEnvironmentMixin, self).__init__(**kw) - - if ref_filter_incl_regex and ref_filter_excl_regex: - raise ConfigurationException( - "Cannot specify both a ref inclusion and exclusion regex.") - self.__is_inclusion_filter = bool(ref_filter_incl_regex) - default_exclude = self.get_default_ref_ignore_regex() - if ref_filter_incl_regex: - ref_filter_regex = ref_filter_incl_regex - elif ref_filter_excl_regex: - ref_filter_regex = ref_filter_excl_regex + '|' + default_exclude - else: - ref_filter_regex = default_exclude - try: - self.__compiled_regex = re.compile(ref_filter_regex) - except Exception: - raise ConfigurationException( - 'Invalid Ref Filter Regex "%s": %s' % (ref_filter_regex, sys.exc_info()[1])) - - if ref_filter_do_send_regex and ref_filter_dont_send_regex: - raise ConfigurationException( - "Cannot specify both a ref doSend and dontSend regex.") - self.__is_do_send_filter = bool(ref_filter_do_send_regex) - if ref_filter_do_send_regex: - ref_filter_send_regex = ref_filter_do_send_regex - elif ref_filter_dont_send_regex: - ref_filter_send_regex = ref_filter_dont_send_regex - else: - ref_filter_send_regex = '.*' - self.__is_do_send_filter = True - try: - self.__send_compiled_regex = re.compile(ref_filter_send_regex) - except Exception: - raise ConfigurationException( - 'Invalid Ref Filter Regex "%s": %s' % - (ref_filter_send_regex, sys.exc_info()[1])) - - def get_ref_filter_regex(self, send_filter=False): - if send_filter: - return self.__send_compiled_regex, self.__is_do_send_filter - else: - return self.__compiled_regex, self.__is_inclusion_filter - - -class ConfigRefFilterEnvironmentMixin( - ConfigEnvironmentMixin, - StaticRefFilterEnvironmentMixin - ): - """Determine branch filtering statically based on config.""" - - def _get_regex(self, config, key): - """Get a list of whitespace-separated regex. The refFilter* config - variables are multivalued (hence the use of get_all), and we - allow each entry to be a whitespace-separated list (hence the - split on each line). The whole thing is glued into a single regex.""" - values = config.get_all(key) - if values is None: - return values - items = [] - for line in values: - for i in line.split(): - items.append(i) - if items == []: - return None - return '|'.join(items) - - def __init__(self, config, **kw): - super(ConfigRefFilterEnvironmentMixin, self).__init__( - config=config, - ref_filter_incl_regex=self._get_regex(config, 'refFilterInclusionRegex'), - ref_filter_excl_regex=self._get_regex(config, 'refFilterExclusionRegex'), - ref_filter_do_send_regex=self._get_regex(config, 'refFilterDoSendRegex'), - ref_filter_dont_send_regex=self._get_regex(config, 'refFilterDontSendRegex'), - **kw - ) - - -class ProjectdescEnvironmentMixin(Environment): - """Make a "projectdesc" value available for templates. - - By default, it is set to the first line of $GIT_DIR/description - (if that file is present and appears to be set meaningfully).""" - - def __init__(self, **kw): - super(ProjectdescEnvironmentMixin, self).__init__(**kw) - self.COMPUTED_KEYS += ['projectdesc'] - - def get_projectdesc(self): - """Return a one-line description of the project.""" - - git_dir = get_git_dir() - try: - projectdesc = open(os.path.join(git_dir, 'description')).readline().strip() - if projectdesc and not projectdesc.startswith('Unnamed repository'): - return projectdesc - except IOError: - pass - - return 'UNNAMED PROJECT' - - -class GenericEnvironmentMixin(Environment): - def get_pusher(self): - return self.osenv.get('USER', self.osenv.get('USERNAME', 'unknown user')) - - -class GitoliteEnvironmentHighPrecMixin(Environment): - def get_pusher(self): - return self.osenv.get('GL_USER', 'unknown user') - - -class GitoliteEnvironmentLowPrecMixin( - ConfigEnvironmentMixin, - Environment): - - def get_repo_shortname(self): - # The gitolite environment variable $GL_REPO is a pretty good - # repo_shortname (though it's probably not as good as a value - # the user might have explicitly put in his config). - return ( - self.osenv.get('GL_REPO', None) or - super(GitoliteEnvironmentLowPrecMixin, self).get_repo_shortname() - ) - - @staticmethod - def _compile_regex(re_template): - return ( - re.compile(re_template % x) - for x in ( - r'BEGIN\s+USER\s+EMAILS', - r'([^\s]+)\s+(.*)', - r'END\s+USER\s+EMAILS', - )) - - def get_fromaddr(self, change=None): - GL_USER = self.osenv.get('GL_USER') - if GL_USER is not None: - # Find the path to gitolite.conf. Note that gitolite v3 - # did away with the GL_ADMINDIR and GL_CONF environment - # variables (they are now hard-coded). - GL_ADMINDIR = self.osenv.get( - 'GL_ADMINDIR', - os.path.expanduser(os.path.join('~', '.gitolite'))) - GL_CONF = self.osenv.get( - 'GL_CONF', - os.path.join(GL_ADMINDIR, 'conf', 'gitolite.conf')) - - mailaddress_map = self.config.get('MailaddressMap') - # If relative, consider relative to GL_CONF: - if mailaddress_map: - mailaddress_map = os.path.join(os.path.dirname(GL_CONF), - mailaddress_map) - if os.path.isfile(mailaddress_map): - f = open(mailaddress_map, 'rU') - try: - # Leading '#' is optional - re_begin, re_user, re_end = self._compile_regex( - r'^(?:\s*#)?\s*%s\s*$') - for l in f: - l = l.rstrip('\n') - if re_begin.match(l) or re_end.match(l): - continue # Ignore these lines - m = re_user.match(l) - if m: - if m.group(1) == GL_USER: - return m.group(2) - else: - continue # Not this user, but not an error - raise ConfigurationException( - "Syntax error in mail address map.\n" - "Check file {}.\n" - "Line: {}".format(mailaddress_map, l)) - - finally: - f.close() - - if os.path.isfile(GL_CONF): - f = open(GL_CONF, 'rU') - try: - in_user_emails_section = False - re_begin, re_user, re_end = self._compile_regex( - r'^\s*#\s*%s\s*$') - for l in f: - l = l.rstrip('\n') - if not in_user_emails_section: - if re_begin.match(l): - in_user_emails_section = True - continue - if re_end.match(l): - break - m = re_user.match(l) - if m and m.group(1) == GL_USER: - return m.group(2) - finally: - f.close() - return super(GitoliteEnvironmentLowPrecMixin, self).get_fromaddr(change) - - -class IncrementalDateTime(object): - """Simple wrapper to give incremental date/times. - - Each call will result in a date/time a second later than the - previous call. This can be used to falsify email headers, to - increase the likelihood that email clients sort the emails - correctly.""" - - def __init__(self): - self.time = time.time() - self.next = self.__next__ # Python 2 backward compatibility - - def __next__(self): - formatted = formatdate(self.time, True) - self.time += 1 - return formatted - - -class StashEnvironmentHighPrecMixin(Environment): - def __init__(self, user=None, repo=None, **kw): - super(StashEnvironmentHighPrecMixin, - self).__init__(user=user, repo=repo, **kw) - self.__user = user - self.__repo = repo - - def get_pusher(self): - return re.match(r'(.*?)\s*<', self.__user).group(1) - - def get_pusher_email(self): - return self.__user - - -class StashEnvironmentLowPrecMixin(Environment): - def __init__(self, user=None, repo=None, **kw): - super(StashEnvironmentLowPrecMixin, self).__init__(**kw) - self.__repo = repo - self.__user = user - - def get_repo_shortname(self): - return self.__repo - - def get_fromaddr(self, change=None): - return self.__user - - -class GerritEnvironmentHighPrecMixin(Environment): - def __init__(self, project=None, submitter=None, update_method=None, **kw): - super(GerritEnvironmentHighPrecMixin, - self).__init__(submitter=submitter, project=project, **kw) - self.__project = project - self.__submitter = submitter - self.__update_method = update_method - "Make an 'update_method' value available for templates." - self.COMPUTED_KEYS += ['update_method'] - - def get_pusher(self): - if self.__submitter: - if self.__submitter.find('<') != -1: - # Submitter has a configured email, we transformed - # __submitter into an RFC 2822 string already. - return re.match(r'(.*?)\s*<', self.__submitter).group(1) - else: - # Submitter has no configured email, it's just his name. - return self.__submitter - else: - # If we arrive here, this means someone pushed "Submit" from - # the gerrit web UI for the CR (or used one of the programmatic - # APIs to do the same, such as gerrit review) and the - # merge/push was done by the Gerrit user. It was technically - # triggered by someone else, but sadly we have no way of - # determining who that someone else is at this point. - return 'Gerrit' # 'unknown user'? - - def get_pusher_email(self): - if self.__submitter: - return self.__submitter - else: - return super(GerritEnvironmentHighPrecMixin, self).get_pusher_email() - - def get_default_ref_ignore_regex(self): - default = super(GerritEnvironmentHighPrecMixin, self).get_default_ref_ignore_regex() - return default + '|^refs/changes/|^refs/cache-automerge/|^refs/meta/' - - def get_revision_recipients(self, revision): - # Merge commits created by Gerrit when users hit "Submit this patchset" - # in the Web UI (or do equivalently with REST APIs or the gerrit review - # command) are not something users want to see an individual email for. - # Filter them out. - committer = read_git_output(['log', '--no-walk', '--format=%cN', - revision.rev.sha1]) - if committer == 'Gerrit Code Review': - return [] - else: - return super(GerritEnvironmentHighPrecMixin, self).get_revision_recipients(revision) - - def get_update_method(self): - return self.__update_method - - -class GerritEnvironmentLowPrecMixin(Environment): - def __init__(self, project=None, submitter=None, **kw): - super(GerritEnvironmentLowPrecMixin, self).__init__(**kw) - self.__project = project - self.__submitter = submitter - - def get_repo_shortname(self): - return self.__project - - def get_fromaddr(self, change=None): - if self.__submitter and self.__submitter.find('<') != -1: - return self.__submitter - else: - return super(GerritEnvironmentLowPrecMixin, self).get_fromaddr(change) - - -class Push(object): - """Represent an entire push (i.e., a group of ReferenceChanges). - - It is easy to figure out what commits were added to a *branch* by - a Reference change: - - git rev-list change.old..change.new - - or removed from a *branch*: - - git rev-list change.new..change.old - - But it is not quite so trivial to determine which entirely new - commits were added to the *repository* by a push and which old - commits were discarded by a push. A big part of the job of this - class is to figure out these things, and to make sure that new - commits are only detailed once even if they were added to multiple - references. - - The first step is to determine the "other" references--those - unaffected by the current push. They are computed by listing all - references then removing any affected by this push. The results - are stored in Push._other_ref_sha1s. - - The commits contained in the repository before this push were - - git rev-list other1 other2 other3 ... change1.old change2.old ... - - Where "changeN.old" is the old value of one of the references - affected by this push. - - The commits contained in the repository after this push are - - git rev-list other1 other2 other3 ... change1.new change2.new ... - - The commits added by this push are the difference between these - two sets, which can be written - - git rev-list \ - ^other1 ^other2 ... \ - ^change1.old ^change2.old ... \ - change1.new change2.new ... - - The commits removed by this push can be computed by - - git rev-list \ - ^other1 ^other2 ... \ - ^change1.new ^change2.new ... \ - change1.old change2.old ... - - The last point is that it is possible that other pushes are - occurring simultaneously to this one, so reference values can - change at any time. It is impossible to eliminate all race - conditions, but we reduce the window of time during which problems - can occur by translating reference names to SHA1s as soon as - possible and working with SHA1s thereafter (because SHA1s are - immutable).""" - - # A map {(changeclass, changetype): integer} specifying the order - # that reference changes will be processed if multiple reference - # changes are included in a single push. The order is significant - # mostly because new commit notifications are threaded together - # with the first reference change that includes the commit. The - # following order thus causes commits to be grouped with branch - # changes (as opposed to tag changes) if possible. - SORT_ORDER = dict( - (value, i) for (i, value) in enumerate([ - (BranchChange, 'update'), - (BranchChange, 'create'), - (AnnotatedTagChange, 'update'), - (AnnotatedTagChange, 'create'), - (NonAnnotatedTagChange, 'update'), - (NonAnnotatedTagChange, 'create'), - (BranchChange, 'delete'), - (AnnotatedTagChange, 'delete'), - (NonAnnotatedTagChange, 'delete'), - (OtherReferenceChange, 'update'), - (OtherReferenceChange, 'create'), - (OtherReferenceChange, 'delete'), - ]) - ) - - def __init__(self, environment, changes, ignore_other_refs=False): - self.changes = sorted(changes, key=self._sort_key) - self.__other_ref_sha1s = None - self.__cached_commits_spec = {} - self.environment = environment - - if ignore_other_refs: - self.__other_ref_sha1s = set() - - @classmethod - def _sort_key(klass, change): - return (klass.SORT_ORDER[change.__class__, change.change_type], change.refname,) - - @property - def _other_ref_sha1s(self): - """The GitObjects referred to by references unaffected by this push. - """ - if self.__other_ref_sha1s is None: - # The refnames being changed by this push: - updated_refs = set( - change.refname - for change in self.changes - ) - - # The SHA-1s of commits referred to by all references in this - # repository *except* updated_refs: - sha1s = set() - fmt = ( - '%(objectname) %(objecttype) %(refname)\n' - '%(*objectname) %(*objecttype) %(refname)' - ) - ref_filter_regex, is_inclusion_filter = \ - self.environment.get_ref_filter_regex() - for line in read_git_lines( - ['for-each-ref', '--format=%s' % (fmt,)]): - (sha1, type, name) = line.split(' ', 2) - if (sha1 and type == 'commit' and - name not in updated_refs and - include_ref(name, ref_filter_regex, is_inclusion_filter)): - sha1s.add(sha1) - - self.__other_ref_sha1s = sha1s - - return self.__other_ref_sha1s - - def _get_commits_spec_incl(self, new_or_old, reference_change=None): - """Get new or old SHA-1 from one or each of the changed refs. - - Return a list of SHA-1 commit identifier strings suitable as - arguments to 'git rev-list' (or 'git log' or ...). The - returned identifiers are either the old or new values from one - or all of the changed references, depending on the values of - new_or_old and reference_change. - - new_or_old is either the string 'new' or the string 'old'. If - 'new', the returned SHA-1 identifiers are the new values from - each changed reference. If 'old', the SHA-1 identifiers are - the old values from each changed reference. - - If reference_change is specified and not None, only the new or - old reference from the specified reference is included in the - return value. - - This function returns None if there are no matching revisions - (e.g., because a branch was deleted and new_or_old is 'new'). - """ - - if not reference_change: - incl_spec = sorted( - getattr(change, new_or_old).sha1 - for change in self.changes - if getattr(change, new_or_old) - ) - if not incl_spec: - incl_spec = None - elif not getattr(reference_change, new_or_old).commit_sha1: - incl_spec = None - else: - incl_spec = [getattr(reference_change, new_or_old).commit_sha1] - return incl_spec - - def _get_commits_spec_excl(self, new_or_old): - """Get exclusion revisions for determining new or discarded commits. - - Return a list of strings suitable as arguments to 'git - rev-list' (or 'git log' or ...) that will exclude all - commits that, depending on the value of new_or_old, were - either previously in the repository (useful for determining - which commits are new to the repository) or currently in the - repository (useful for determining which commits were - discarded from the repository). - - new_or_old is either the string 'new' or the string 'old'. If - 'new', the commits to be excluded are those that were in the - repository before the push. If 'old', the commits to be - excluded are those that are currently in the repository. """ - - old_or_new = {'old': 'new', 'new': 'old'}[new_or_old] - excl_revs = self._other_ref_sha1s.union( - getattr(change, old_or_new).sha1 - for change in self.changes - if getattr(change, old_or_new).type in ['commit', 'tag'] - ) - return ['^' + sha1 for sha1 in sorted(excl_revs)] - - def get_commits_spec(self, new_or_old, reference_change=None): - """Get rev-list arguments for added or discarded commits. - - Return a list of strings suitable as arguments to 'git - rev-list' (or 'git log' or ...) that select those commits - that, depending on the value of new_or_old, are either new to - the repository or were discarded from the repository. - - new_or_old is either the string 'new' or the string 'old'. If - 'new', the returned list is used to select commits that are - new to the repository. If 'old', the returned value is used - to select the commits that have been discarded from the - repository. - - If reference_change is specified and not None, the new or - discarded commits are limited to those that are reachable from - the new or old value of the specified reference. - - This function returns None if there are no added (or discarded) - revisions. - """ - key = (new_or_old, reference_change) - if key not in self.__cached_commits_spec: - ret = self._get_commits_spec_incl(new_or_old, reference_change) - if ret is not None: - ret.extend(self._get_commits_spec_excl(new_or_old)) - self.__cached_commits_spec[key] = ret - return self.__cached_commits_spec[key] - - def get_new_commits(self, reference_change=None): - """Return a list of commits added by this push. - - Return a list of the object names of commits that were added - by the part of this push represented by reference_change. If - reference_change is None, then return a list of *all* commits - added by this push.""" - - spec = self.get_commits_spec('new', reference_change) - return git_rev_list(spec) - - def get_discarded_commits(self, reference_change): - """Return a list of commits discarded by this push. - - Return a list of the object names of commits that were - entirely discarded from the repository by the part of this - push represented by reference_change.""" - - spec = self.get_commits_spec('old', reference_change) - return git_rev_list(spec) - - def send_emails(self, mailer, body_filter=None): - """Use send all of the notification emails needed for this push. - - Use send all of the notification emails (including reference - change emails and commit emails) needed for this push. Send - the emails using mailer. If body_filter is not None, then use - it to filter the lines that are intended for the email - body.""" - - # The sha1s of commits that were introduced by this push. - # They will be removed from this set as they are processed, to - # guarantee that one (and only one) email is generated for - # each new commit. - unhandled_sha1s = set(self.get_new_commits()) - send_date = IncrementalDateTime() - for change in self.changes: - sha1s = [] - for sha1 in reversed(list(self.get_new_commits(change))): - if sha1 in unhandled_sha1s: - sha1s.append(sha1) - unhandled_sha1s.remove(sha1) - - # Check if we've got anyone to send to - if not change.recipients: - change.environment.log_warning( - '*** no recipients configured so no email will be sent\n' - '*** for %r update %s->%s' - % (change.refname, change.old.sha1, change.new.sha1,) - ) - else: - if not change.environment.quiet: - change.environment.log_msg( - 'Sending notification emails to: %s' % (change.recipients,)) - extra_values = {'send_date': next(send_date)} - - rev = change.send_single_combined_email(sha1s) - if rev: - mailer.send( - change.generate_combined_email(self, rev, body_filter, extra_values), - rev.recipients, - ) - # This change is now fully handled; no need to handle - # individual revisions any further. - continue - else: - mailer.send( - change.generate_email(self, body_filter, extra_values), - change.recipients, - ) - - max_emails = change.environment.maxcommitemails - if max_emails and len(sha1s) > max_emails: - change.environment.log_warning( - '*** Too many new commits (%d), not sending commit emails.\n' % len(sha1s) + - '*** Try setting multimailhook.maxCommitEmails to a greater value\n' + - '*** Currently, multimailhook.maxCommitEmails=%d' % max_emails - ) - return - - for (num, sha1) in enumerate(sha1s): - rev = Revision(change, GitObject(sha1), num=num + 1, tot=len(sha1s)) - if len(rev.parents) > 1 and change.environment.excludemergerevisions: - # skipping a merge commit - continue - if not rev.recipients and rev.cc_recipients: - change.environment.log_msg('*** Replacing Cc: with To:') - rev.recipients = rev.cc_recipients - rev.cc_recipients = None - if rev.recipients: - extra_values = {'send_date': next(send_date)} - mailer.send( - rev.generate_email(self, body_filter, extra_values), - rev.recipients, - ) - - # Consistency check: - if unhandled_sha1s: - change.environment.log_error( - 'ERROR: No emails were sent for the following new commits:\n' - ' %s' - % ('\n '.join(sorted(unhandled_sha1s)),) - ) - - -def include_ref(refname, ref_filter_regex, is_inclusion_filter): - does_match = bool(ref_filter_regex.search(refname)) - if is_inclusion_filter: - return does_match - else: # exclusion filter -- we include the ref if the regex doesn't match - return not does_match - - -def run_as_post_receive_hook(environment, mailer): - environment.check() - send_filter_regex, send_is_inclusion_filter = environment.get_ref_filter_regex(True) - ref_filter_regex, is_inclusion_filter = environment.get_ref_filter_regex(False) - changes = [] - while True: - line = read_line(sys.stdin) - if line == '': - break - (oldrev, newrev, refname) = line.strip().split(' ', 2) - environment.get_logger().debug( - "run_as_post_receive_hook: oldrev=%s, newrev=%s, refname=%s" % - (oldrev, newrev, refname)) - - if not include_ref(refname, ref_filter_regex, is_inclusion_filter): - continue - if not include_ref(refname, send_filter_regex, send_is_inclusion_filter): - continue - changes.append( - ReferenceChange.create(environment, oldrev, newrev, refname) - ) - if not changes: - mailer.close() - return - push = Push(environment, changes) - try: - push.send_emails(mailer, body_filter=environment.filter_body) - finally: - mailer.close() - - -def run_as_update_hook(environment, mailer, refname, oldrev, newrev, force_send=False): - environment.check() - send_filter_regex, send_is_inclusion_filter = environment.get_ref_filter_regex(True) - ref_filter_regex, is_inclusion_filter = environment.get_ref_filter_regex(False) - if not include_ref(refname, ref_filter_regex, is_inclusion_filter): - return - if not include_ref(refname, send_filter_regex, send_is_inclusion_filter): - return - changes = [ - ReferenceChange.create( - environment, - read_git_output(['rev-parse', '--verify', oldrev]), - read_git_output(['rev-parse', '--verify', newrev]), - refname, - ), - ] - if not changes: - mailer.close() - return - push = Push(environment, changes, force_send) - try: - push.send_emails(mailer, body_filter=environment.filter_body) - finally: - mailer.close() - - -def check_ref_filter(environment): - send_filter_regex, send_is_inclusion = environment.get_ref_filter_regex(True) - ref_filter_regex, ref_is_inclusion = environment.get_ref_filter_regex(False) - - def inc_exc_lusion(b): - if b: - return 'inclusion' - else: - return 'exclusion' - - if send_filter_regex: - sys.stdout.write("DoSend/DontSend filter regex (" + - (inc_exc_lusion(send_is_inclusion)) + - '): ' + send_filter_regex.pattern + - '\n') - if send_filter_regex: - sys.stdout.write("Include/Exclude filter regex (" + - (inc_exc_lusion(ref_is_inclusion)) + - '): ' + ref_filter_regex.pattern + - '\n') - sys.stdout.write(os.linesep) - - sys.stdout.write( - "Refs marked as EXCLUDE are excluded by either refFilterInclusionRegex\n" - "or refFilterExclusionRegex. No emails will be sent for commits included\n" - "in these refs.\n" - "Refs marked as DONT-SEND are excluded by either refFilterDoSendRegex or\n" - "refFilterDontSendRegex, but not by either refFilterInclusionRegex or\n" - "refFilterExclusionRegex. Emails will be sent for commits included in these\n" - "refs only when the commit reaches a ref which isn't excluded.\n" - "Refs marked as DO-SEND are not excluded by any filter. Emails will\n" - "be sent normally for commits included in these refs.\n") - - sys.stdout.write(os.linesep) - - for refname in read_git_lines(['for-each-ref', '--format', '%(refname)']): - sys.stdout.write(refname) - if not include_ref(refname, ref_filter_regex, ref_is_inclusion): - sys.stdout.write(' EXCLUDE') - elif not include_ref(refname, send_filter_regex, send_is_inclusion): - sys.stdout.write(' DONT-SEND') - else: - sys.stdout.write(' DO-SEND') - - sys.stdout.write(os.linesep) - - -def show_env(environment, out): - out.write('Environment values:\n') - for (k, v) in sorted(environment.get_values().items()): - if k: # Don't show the {'' : ''} pair. - out.write(' %s : %r\n' % (k, v)) - out.write('\n') - # Flush to avoid interleaving with further log output - out.flush() - - -def check_setup(environment): - environment.check() - show_env(environment, sys.stdout) - sys.stdout.write("Now, checking that git-multimail's standard input " - "is properly set ..." + os.linesep) - sys.stdout.write("Please type some text and then press Return" + os.linesep) - stdin = sys.stdin.readline() - sys.stdout.write("You have just entered:" + os.linesep) - sys.stdout.write(stdin) - sys.stdout.write("git-multimail seems properly set up." + os.linesep) - - -def choose_mailer(config, environment): - mailer = config.get('mailer', default='sendmail') - - if mailer == 'smtp': - smtpserver = config.get('smtpserver', default='localhost') - smtpservertimeout = float(config.get('smtpservertimeout', default=10.0)) - smtpserverdebuglevel = int(config.get('smtpserverdebuglevel', default=0)) - smtpencryption = config.get('smtpencryption', default='none') - smtpuser = config.get('smtpuser', default='') - smtppass = config.get('smtppass', default='') - smtpcacerts = config.get('smtpcacerts', default='') - mailer = SMTPMailer( - environment, - envelopesender=(environment.get_sender() or environment.get_fromaddr()), - smtpserver=smtpserver, smtpservertimeout=smtpservertimeout, - smtpserverdebuglevel=smtpserverdebuglevel, - smtpencryption=smtpencryption, - smtpuser=smtpuser, - smtppass=smtppass, - smtpcacerts=smtpcacerts - ) - elif mailer == 'sendmail': - command = config.get('sendmailcommand') - if command: - command = shlex.split(command) - mailer = SendMailer(environment, - command=command, envelopesender=environment.get_sender()) - else: - environment.log_error( - 'fatal: multimailhook.mailer is set to an incorrect value: "%s"\n' % mailer + - 'please use one of "smtp" or "sendmail".' - ) - sys.exit(1) - return mailer - - -KNOWN_ENVIRONMENTS = { - 'generic': {'highprec': GenericEnvironmentMixin}, - 'gitolite': {'highprec': GitoliteEnvironmentHighPrecMixin, - 'lowprec': GitoliteEnvironmentLowPrecMixin}, - 'stash': {'highprec': StashEnvironmentHighPrecMixin, - 'lowprec': StashEnvironmentLowPrecMixin}, - 'gerrit': {'highprec': GerritEnvironmentHighPrecMixin, - 'lowprec': GerritEnvironmentLowPrecMixin}, - } - - -def choose_environment(config, osenv=None, env=None, recipients=None, - hook_info=None): - env_name = choose_environment_name(config, env, osenv) - environment_klass = build_environment_klass(env_name) - env = build_environment(environment_klass, env_name, config, - osenv, recipients, hook_info) - return env - - -def choose_environment_name(config, env, osenv): - if not osenv: - osenv = os.environ - - if not env: - env = config.get('environment') - - if not env: - if 'GL_USER' in osenv and 'GL_REPO' in osenv: - env = 'gitolite' - else: - env = 'generic' - return env - - -COMMON_ENVIRONMENT_MIXINS = [ - ConfigRecipientsEnvironmentMixin, - CLIRecipientsEnvironmentMixin, - ConfigRefFilterEnvironmentMixin, - ProjectdescEnvironmentMixin, - ConfigMaxlinesEnvironmentMixin, - ComputeFQDNEnvironmentMixin, - ConfigFilterLinesEnvironmentMixin, - PusherDomainEnvironmentMixin, - ConfigOptionsEnvironmentMixin, - ] - - -def build_environment_klass(env_name): - if 'class' in KNOWN_ENVIRONMENTS[env_name]: - return KNOWN_ENVIRONMENTS[env_name]['class'] - - environment_mixins = [] - known_env = KNOWN_ENVIRONMENTS[env_name] - if 'highprec' in known_env: - high_prec_mixin = known_env['highprec'] - environment_mixins.append(high_prec_mixin) - environment_mixins = environment_mixins + COMMON_ENVIRONMENT_MIXINS - if 'lowprec' in known_env: - low_prec_mixin = known_env['lowprec'] - environment_mixins.append(low_prec_mixin) - environment_mixins.append(Environment) - klass_name = env_name.capitalize() + 'Environment' - environment_klass = type( - klass_name, - tuple(environment_mixins), - {}, - ) - KNOWN_ENVIRONMENTS[env_name]['class'] = environment_klass - return environment_klass - - -GerritEnvironment = build_environment_klass('gerrit') -StashEnvironment = build_environment_klass('stash') -GitoliteEnvironment = build_environment_klass('gitolite') -GenericEnvironment = build_environment_klass('generic') - - -def build_environment(environment_klass, env, config, - osenv, recipients, hook_info): - environment_kw = { - 'osenv': osenv, - 'config': config, - } - - if env == 'stash': - environment_kw['user'] = hook_info['stash_user'] - environment_kw['repo'] = hook_info['stash_repo'] - elif env == 'gerrit': - environment_kw['project'] = hook_info['project'] - environment_kw['submitter'] = hook_info['submitter'] - environment_kw['update_method'] = hook_info['update_method'] - - environment_kw['cli_recipients'] = recipients - - return environment_klass(**environment_kw) - - -def get_version(): - oldcwd = os.getcwd() - try: - try: - os.chdir(os.path.dirname(os.path.realpath(__file__))) - git_version = read_git_output(['describe', '--tags', 'HEAD']) - if git_version == __version__: - return git_version - else: - return '%s (%s)' % (__version__, git_version) - except: - pass - finally: - os.chdir(oldcwd) - return __version__ - - -def compute_gerrit_options(options, args, required_gerrit_options, - raw_refname): - if None in required_gerrit_options: - raise SystemExit("Error: Specify all of --oldrev, --newrev, --refname, " - "and --project; or none of them.") - - if options.environment not in (None, 'gerrit'): - raise SystemExit("Non-gerrit environments incompatible with --oldrev, " - "--newrev, --refname, and --project") - options.environment = 'gerrit' - - if args: - raise SystemExit("Error: Positional parameters not allowed with " - "--oldrev, --newrev, and --refname.") - - # Gerrit oddly omits 'refs/heads/' in the refname when calling - # ref-updated hook; put it back. - git_dir = get_git_dir() - if (not os.path.exists(os.path.join(git_dir, raw_refname)) and - os.path.exists(os.path.join(git_dir, 'refs', 'heads', - raw_refname))): - options.refname = 'refs/heads/' + options.refname - - # New revisions can appear in a gerrit repository either due to someone - # pushing directly (in which case options.submitter will be set), or they - # can press "Submit this patchset" in the web UI for some CR (in which - # case options.submitter will not be set and gerrit will not have provided - # us the information about who pressed the button). - # - # Note for the nit-picky: I'm lumping in REST API calls and the ssh - # gerrit review command in with "Submit this patchset" button, since they - # have the same effect. - if options.submitter: - update_method = 'pushed' - # The submitter argument is almost an RFC 2822 email address; change it - # from 'User Name (email@domain)' to 'User Name <email@domain>' so it is - options.submitter = options.submitter.replace('(', '<').replace(')', '>') - else: - update_method = 'submitted' - # Gerrit knew who submitted this patchset, but threw that information - # away when it invoked this hook. However, *IF* Gerrit created a - # merge to bring the patchset in (project 'Submit Type' is either - # "Always Merge", or is "Merge if Necessary" and happens to be - # necessary for this particular CR), then it will have the committer - # of that merge be 'Gerrit Code Review' and the author will be the - # person who requested the submission of the CR. Since this is fairly - # likely for most gerrit installations (of a reasonable size), it's - # worth the extra effort to try to determine the actual submitter. - rev_info = read_git_lines(['log', '--no-walk', '--merges', - '--format=%cN%n%aN <%aE>', options.newrev]) - if rev_info and rev_info[0] == 'Gerrit Code Review': - options.submitter = rev_info[1] - - # We pass back refname, oldrev, newrev as args because then the - # gerrit ref-updated hook is much like the git update hook - return (options, - [options.refname, options.oldrev, options.newrev], - {'project': options.project, 'submitter': options.submitter, - 'update_method': update_method}) - - -def check_hook_specific_args(options, args): - raw_refname = options.refname - # Convert each string option unicode for Python3. - if PYTHON3: - opts = ['environment', 'recipients', 'oldrev', 'newrev', 'refname', - 'project', 'submitter', 'stash_user', 'stash_repo'] - for opt in opts: - if not hasattr(options, opt): - continue - obj = getattr(options, opt) - if obj: - enc = obj.encode('utf-8', 'surrogateescape') - dec = enc.decode('utf-8', 'replace') - setattr(options, opt, dec) - - # First check for stash arguments - if (options.stash_user is None) != (options.stash_repo is None): - raise SystemExit("Error: Specify both of --stash-user and " - "--stash-repo or neither.") - if options.stash_user: - options.environment = 'stash' - return options, args, {'stash_user': options.stash_user, - 'stash_repo': options.stash_repo} - - # Finally, check for gerrit specific arguments - required_gerrit_options = (options.oldrev, options.newrev, options.refname, - options.project) - if required_gerrit_options != (None,) * 4: - return compute_gerrit_options(options, args, required_gerrit_options, - raw_refname) - - # No special options in use, just return what we started with - return options, args, {} - - -class Logger(object): - def parse_verbose(self, verbose): - if verbose > 0: - return logging.DEBUG - else: - return logging.INFO - - def create_log_file(self, environment, name, path, verbosity): - log_file = logging.getLogger(name) - file_handler = logging.FileHandler(path) - log_fmt = logging.Formatter("%(asctime)s [%(levelname)-5.5s] %(message)s") - file_handler.setFormatter(log_fmt) - log_file.addHandler(file_handler) - log_file.setLevel(verbosity) - return log_file - - def __init__(self, environment): - self.environment = environment - self.loggers = [] - stderr_log = logging.getLogger('git_multimail.stderr') - - class EncodedStderr(object): - def write(self, x): - write_str(sys.stderr, x) - - def flush(self): - sys.stderr.flush() - - stderr_handler = logging.StreamHandler(EncodedStderr()) - stderr_log.addHandler(stderr_handler) - stderr_log.setLevel(self.parse_verbose(environment.verbose)) - self.loggers.append(stderr_log) - - if environment.debug_log_file is not None: - debug_log_file = self.create_log_file( - environment, 'git_multimail.debug', environment.debug_log_file, logging.DEBUG) - self.loggers.append(debug_log_file) - - if environment.log_file is not None: - log_file = self.create_log_file( - environment, 'git_multimail.file', environment.log_file, logging.INFO) - self.loggers.append(log_file) - - if environment.error_log_file is not None: - error_log_file = self.create_log_file( - environment, 'git_multimail.error', environment.error_log_file, logging.ERROR) - self.loggers.append(error_log_file) - - def info(self, msg, *args, **kwargs): - for l in self.loggers: - l.info(msg, *args, **kwargs) - - def debug(self, msg, *args, **kwargs): - for l in self.loggers: - l.debug(msg, *args, **kwargs) - - def warning(self, msg, *args, **kwargs): - for l in self.loggers: - l.warning(msg, *args, **kwargs) - - def error(self, msg, *args, **kwargs): - for l in self.loggers: - l.error(msg, *args, **kwargs) - - -def main(args): - parser = optparse.OptionParser( - description=__doc__, - usage='%prog [OPTIONS]\n or: %prog [OPTIONS] REFNAME OLDREV NEWREV', - ) - - parser.add_option( - '--environment', '--env', action='store', type='choice', - choices=list(KNOWN_ENVIRONMENTS.keys()), default=None, - help=( - 'Choose type of environment is in use. Default is taken from ' - 'multimailhook.environment if set; otherwise "generic".' - ), - ) - parser.add_option( - '--stdout', action='store_true', default=False, - help='Output emails to stdout rather than sending them.', - ) - parser.add_option( - '--recipients', action='store', default=None, - help='Set list of email recipients for all types of emails.', - ) - parser.add_option( - '--show-env', action='store_true', default=False, - help=( - 'Write to stderr the values determined for the environment ' - '(intended for debugging purposes), then proceed normally.' - ), - ) - parser.add_option( - '--force-send', action='store_true', default=False, - help=( - 'Force sending refchange email when using as an update hook. ' - 'This is useful to work around the unreliable new commits ' - 'detection in this mode.' - ), - ) - parser.add_option( - '-c', metavar="<name>=<value>", action='append', - help=( - 'Pass a configuration parameter through to git. The value given ' - 'will override values from configuration files. See the -c option ' - 'of git(1) for more details. (Only works with git >= 1.7.3)' - ), - ) - parser.add_option( - '--version', '-v', action='store_true', default=False, - help=( - "Display git-multimail's version" - ), - ) - - parser.add_option( - '--python-version', action='store_true', default=False, - help=( - "Display the version of Python used by git-multimail" - ), - ) - - parser.add_option( - '--check-ref-filter', action='store_true', default=False, - help=( - 'List refs and show information on how git-multimail ' - 'will process them.' - ) - ) - - # The following options permit this script to be run as a gerrit - # ref-updated hook. See e.g. - # code.google.com/p/gerrit/source/browse/Documentation/config-hooks.txt - # We suppress help for these items, since these are specific to gerrit, - # and we don't want users directly using them any way other than how the - # gerrit ref-updated hook is called. - parser.add_option('--oldrev', action='store', help=optparse.SUPPRESS_HELP) - parser.add_option('--newrev', action='store', help=optparse.SUPPRESS_HELP) - parser.add_option('--refname', action='store', help=optparse.SUPPRESS_HELP) - parser.add_option('--project', action='store', help=optparse.SUPPRESS_HELP) - parser.add_option('--submitter', action='store', help=optparse.SUPPRESS_HELP) - - # The following allow this to be run as a stash asynchronous post-receive - # hook (almost identical to a git post-receive hook but triggered also for - # merges of pull requests from the UI). We suppress help for these items, - # since these are specific to stash. - parser.add_option('--stash-user', action='store', help=optparse.SUPPRESS_HELP) - parser.add_option('--stash-repo', action='store', help=optparse.SUPPRESS_HELP) - - (options, args) = parser.parse_args(args) - (options, args, hook_info) = check_hook_specific_args(options, args) - - if options.version: - sys.stdout.write('git-multimail version ' + get_version() + '\n') - return - - if options.python_version: - sys.stdout.write('Python version ' + sys.version + '\n') - return - - if options.c: - Config.add_config_parameters(options.c) - - config = Config('multimailhook') - - environment = None - try: - environment = choose_environment( - config, osenv=os.environ, - env=options.environment, - recipients=options.recipients, - hook_info=hook_info, - ) - - if options.show_env: - show_env(environment, sys.stderr) - - if options.stdout or environment.stdout: - mailer = OutputMailer(sys.stdout, environment) - else: - mailer = choose_mailer(config, environment) - - must_check_setup = os.environ.get('GIT_MULTIMAIL_CHECK_SETUP') - if must_check_setup == '': - must_check_setup = False - if options.check_ref_filter: - check_ref_filter(environment) - elif must_check_setup: - check_setup(environment) - # Dual mode: if arguments were specified on the command line, run - # like an update hook; otherwise, run as a post-receive hook. - elif args: - if len(args) != 3: - parser.error('Need zero or three non-option arguments') - (refname, oldrev, newrev) = args - environment.get_logger().debug( - "run_as_update_hook: refname=%s, oldrev=%s, newrev=%s, force_send=%s" % - (refname, oldrev, newrev, options.force_send)) - run_as_update_hook(environment, mailer, refname, oldrev, newrev, options.force_send) - else: - run_as_post_receive_hook(environment, mailer) - except ConfigurationException: - sys.exit(sys.exc_info()[1]) - except SystemExit: - raise - except Exception: - t, e, tb = sys.exc_info() - import traceback - sys.stderr.write('\n') # Avoid mixing message with previous output - msg = ( - 'Exception \'' + t.__name__ + - '\' raised. Please report this as a bug to\n' - 'https://github.com/git-multimail/git-multimail/issues\n' - 'with the information below:\n\n' - 'git-multimail version ' + get_version() + '\n' - 'Python version ' + sys.version + '\n' + - traceback.format_exc()) - try: - environment.get_logger().error(msg) - except: - sys.stderr.write(msg) - sys.exit(1) - - -if __name__ == '__main__': - main(sys.argv[1:]) diff --git a/contrib/hooks/multimail/migrate-mailhook-config b/contrib/hooks/multimail/migrate-mailhook-config deleted file mode 100755 index 241ba22fa3..0000000000 --- a/contrib/hooks/multimail/migrate-mailhook-config +++ /dev/null @@ -1,274 +0,0 @@ -#! /usr/bin/env python - -"""Migrate a post-receive-email configuration to be usable with git_multimail.py. - -See README.migrate-from-post-receive-email for more information. - -""" - -import sys -import optparse - -from git_multimail import CommandError -from git_multimail import Config -from git_multimail import read_output - - -OLD_NAMES = [ - 'mailinglist', - 'announcelist', - 'envelopesender', - 'emailprefix', - 'showrev', - 'emailmaxlines', - 'diffopts', - 'scancommitforcc', - ] - -NEW_NAMES = [ - 'environment', - 'reponame', - 'mailinglist', - 'refchangelist', - 'commitlist', - 'announcelist', - 'announceshortlog', - 'envelopesender', - 'administrator', - 'emailprefix', - 'emailmaxlines', - 'diffopts', - 'emaildomain', - 'scancommitforcc', - ] - - -INFO = """\ - -SUCCESS! - -Your post-receive-email configuration has been converted to -git-multimail format. Please see README and -README.migrate-from-post-receive-email to learn about other -git-multimail configuration possibilities. - -For example, git-multimail has the following new options with no -equivalent in post-receive-email. You might want to read about them -to see if they would be useful in your situation: - -""" - - -def _check_old_config_exists(old): - """Check that at least one old configuration value is set.""" - - for name in OLD_NAMES: - if name in old: - return True - - return False - - -def _check_new_config_clear(new): - """Check that none of the new configuration names are set.""" - - retval = True - for name in NEW_NAMES: - if name in new: - if retval: - sys.stderr.write('INFO: The following configuration values already exist:\n\n') - sys.stderr.write(' "%s.%s"\n' % (new.section, name)) - retval = False - - return retval - - -def erase_values(config, names): - for name in names: - if name in config: - try: - sys.stderr.write('...unsetting "%s.%s"\n' % (config.section, name)) - config.unset_all(name) - except CommandError: - sys.stderr.write( - '\nWARNING: could not unset "%s.%s". ' - 'Perhaps it is not set at the --local level?\n\n' - % (config.section, name) - ) - - -def is_section_empty(section, local): - """Return True iff the specified configuration section is empty. - - Iff local is True, use the --local option when invoking 'git - config'.""" - - if local: - local_option = ['--local'] - else: - local_option = [] - - try: - read_output( - ['git', 'config'] + - local_option + - ['--get-regexp', '^%s\.' % (section,)] - ) - except CommandError: - t, e, traceback = sys.exc_info() - if e.retcode == 1: - # This means that no settings were found. - return True - else: - raise - else: - return False - - -def remove_section_if_empty(section): - """If the specified configuration section is empty, delete it.""" - - try: - empty = is_section_empty(section, local=True) - except CommandError: - # Older versions of git do not support the --local option, so - # if the first attempt fails, try without --local. - try: - empty = is_section_empty(section, local=False) - except CommandError: - sys.stderr.write( - '\nINFO: If configuration section "%s.*" is empty, you might want ' - 'to delete it.\n\n' - % (section,) - ) - return - - if empty: - sys.stderr.write('...removing section "%s.*"\n' % (section,)) - read_output(['git', 'config', '--remove-section', section]) - else: - sys.stderr.write( - '\nINFO: Configuration section "%s.*" still has contents. ' - 'It will not be deleted.\n\n' - % (section,) - ) - - -def migrate_config(strict=False, retain=False, overwrite=False): - old = Config('hooks') - new = Config('multimailhook') - if not _check_old_config_exists(old): - sys.exit( - 'Your repository has no post-receive-email configuration. ' - 'Nothing to do.' - ) - if not _check_new_config_clear(new): - if overwrite: - sys.stderr.write('\nWARNING: Erasing the above values...\n\n') - erase_values(new, NEW_NAMES) - else: - sys.exit( - '\nERROR: Refusing to overwrite existing values. Use the --overwrite\n' - 'option to continue anyway.' - ) - - name = 'showrev' - if name in old: - msg = 'git-multimail does not support "%s.%s"' % (old.section, name,) - if strict: - sys.exit( - 'ERROR: %s.\n' - 'Please unset that value then try again, or run without --strict.' - % (msg,) - ) - else: - sys.stderr.write('\nWARNING: %s (ignoring).\n\n' % (msg,)) - - for name in ['mailinglist', 'announcelist']: - if name in old: - sys.stderr.write( - '...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name) - ) - old_recipients = old.get_all(name, default=None) - old_recipients = ', '.join(o.strip() for o in old_recipients) - new.set_recipients(name, old_recipients) - - if strict: - sys.stderr.write( - '...setting "%s.commitlist" to the empty string\n' % (new.section,) - ) - new.set_recipients('commitlist', '') - sys.stderr.write( - '...setting "%s.announceshortlog" to "true"\n' % (new.section,) - ) - new.set('announceshortlog', 'true') - - for name in ['envelopesender', 'emailmaxlines', 'diffopts', 'scancommitforcc']: - if name in old: - sys.stderr.write( - '...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name) - ) - new.set(name, old.get(name)) - - name = 'emailprefix' - if name in old: - sys.stderr.write( - '...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name) - ) - new.set(name, old.get(name)) - elif strict: - sys.stderr.write( - '...setting "%s.%s" to "[SCM]" to preserve old subject lines\n' - % (new.section, name) - ) - new.set(name, '[SCM]') - - if not retain: - erase_values(old, OLD_NAMES) - remove_section_if_empty(old.section) - - sys.stderr.write(INFO) - for name in NEW_NAMES: - if name not in OLD_NAMES: - sys.stderr.write(' "%s.%s"\n' % (new.section, name,)) - sys.stderr.write('\n') - - -def main(args): - parser = optparse.OptionParser( - description=__doc__, - usage='%prog [OPTIONS]', - ) - - parser.add_option( - '--strict', action='store_true', default=False, - help=( - 'Slavishly configure git-multimail as closely as possible to ' - 'the post-receive-email configuration. Default is to turn ' - 'on some new features that have no equivalent in post-receive-email.' - ), - ) - parser.add_option( - '--retain', action='store_true', default=False, - help=( - 'Retain the post-receive-email configuration values. ' - 'Default is to delete them after the new values are set.' - ), - ) - parser.add_option( - '--overwrite', action='store_true', default=False, - help=( - 'Overwrite any existing git-multimail configuration settings. ' - 'Default is to abort if such settings already exist.' - ), - ) - - (options, args) = parser.parse_args(args) - - if args: - parser.error('Unexpected arguments: %s' % (' '.join(args),)) - - migrate_config(strict=options.strict, retain=options.retain, overwrite=options.overwrite) - - -main(sys.argv[1:]) diff --git a/contrib/hooks/multimail/post-receive.example b/contrib/hooks/multimail/post-receive.example deleted file mode 100755 index 0f98c5a23d..0000000000 --- a/contrib/hooks/multimail/post-receive.example +++ /dev/null @@ -1,101 +0,0 @@ -#! /usr/bin/env python - -"""Example post-receive hook based on git-multimail. - -The simplest way to use git-multimail is to use the script -git_multimail.py directly as a post-receive hook, and to configure it -using Git's configuration files and command-line parameters. You can -also write your own Python wrapper for more advanced configurability, -using git_multimail.py as a Python module. - -This script is a simple example of such a post-receive hook. It is -intended to be customized before use; see the comments in the script -to help you get started. - -Using git-multimail as a Python module as done here provides more -flexibility. It has the following advantages: - -* The tool's behavior can be customized using arbitrary Python code, - without having to edit git_multimail.py. - -* Configuration settings can be read from other sources; for example, - user names and email addresses could be read from LDAP or from a - database. Or the settings can even be hardcoded in the importing - Python script, if this is preferred. - -This script is a very basic example of how to use git_multimail.py as -a module. The comments below explain some of the points at which the -script's behavior could be changed or customized. - -""" - -import sys - -# If necessary, add the path to the directory containing -# git_multimail.py to the Python path as follows. (This is not -# necessary if git_multimail.py is in the same directory as this -# script): - -#LIBDIR = 'path/to/directory/containing/module' -#sys.path.insert(0, LIBDIR) - -import git_multimail - -# It is possible to modify the output templates here; e.g.: - -#git_multimail.FOOTER_TEMPLATE = """\ -# -#-- \n\ -#This email was generated by the wonderful git-multimail tool. -#""" - - -# Specify which "git config" section contains the configuration for -# git-multimail: -config = git_multimail.Config('multimailhook') - -# Set some Git configuration variables. Equivalent to passing var=val -# to "git -c var=val" each time git is called, or to adding the -# configuration in .git/config (must come before instantiating the -# environment) : -#git_multimail.Config.add_config_parameters('multimailhook.commitEmailFormat=html') -#git_multimail.Config.add_config_parameters(('user.name=foo', 'user.email=foo@example.com')) - -# Select the type of environment: -try: - environment = git_multimail.GenericEnvironment(config=config) - #environment = git_multimail.GitoliteEnvironment(config=config) -except git_multimail.ConfigurationException: - sys.stderr.write('*** %s\n' % sys.exc_info()[1]) - sys.exit(1) - - -# Choose the method of sending emails based on the git config: -mailer = git_multimail.choose_mailer(config, environment) - -# Alternatively, you may hardcode the mailer using code like one of -# the following: - -# Use "/usr/sbin/sendmail -oi -t" to send emails. The envelopesender -# argument is optional: -#mailer = git_multimail.SendMailer( -# command=['/usr/sbin/sendmail', '-oi', '-t'], -# envelopesender='git-repo@example.com', -# ) - -# Use Python's smtplib to send emails. Both arguments are required. -#mailer = git_multimail.SMTPMailer( -# environment=environment, -# envelopesender='git-repo@example.com', -# # The smtpserver argument can also include a port number; e.g., -# # smtpserver='mail.example.com:25' -# smtpserver='mail.example.com', -# ) - -# OutputMailer is intended only for testing; it writes the emails to -# the specified file stream. -#mailer = git_multimail.OutputMailer(sys.stdout) - - -# Read changes from stdin and send notification emails: -git_multimail.run_as_post_receive_hook(environment, mailer) |