diff options
| -rw-r--r-- | Documentation/technical/api-trace.txt | 140 | ||||
| -rw-r--r-- | trace.h | 133 |
2 files changed, 131 insertions, 142 deletions
diff --git a/Documentation/technical/api-trace.txt b/Documentation/technical/api-trace.txt deleted file mode 100644 index fadb5979c4..0000000000 --- a/Documentation/technical/api-trace.txt +++ /dev/null @@ -1,140 +0,0 @@ -trace API -========= - -The trace API can be used to print debug messages to stderr or a file. Trace -code is inactive unless explicitly enabled by setting `GIT_TRACE*` environment -variables. - -The trace implementation automatically adds `timestamp file:line ... \n` to -all trace messages. E.g.: - ------------- -23:59:59.123456 git.c:312 trace: built-in: git 'foo' -00:00:00.000001 builtin/foo.c:99 foo: some message ------------- - -Data Structures ---------------- - -`struct trace_key`:: - - Defines a trace key (or category). The default (for API functions that - don't take a key) is `GIT_TRACE`. -+ -E.g. to define a trace key controlled by environment variable `GIT_TRACE_FOO`: -+ ------------- -static struct trace_key trace_foo = TRACE_KEY_INIT(FOO); - -static void trace_print_foo(const char *message) -{ - trace_printf_key(&trace_foo, "%s", message); -} ------------- -+ -Note: don't use `const` as the trace implementation stores internal state in -the `trace_key` structure. - -Functions ---------- - -`int trace_want(struct trace_key *key)`:: - - Checks whether the trace key is enabled. Used to prevent expensive - string formatting before calling one of the printing APIs. - -`void trace_disable(struct trace_key *key)`:: - - Disables tracing for the specified key, even if the environment - variable was set. - -`void trace_printf(const char *format, ...)`:: -`void trace_printf_key(struct trace_key *key, const char *format, ...)`:: - - Prints a formatted message, similar to printf. - -`void trace_argv_printf(const char **argv, const char *format, ...)``:: - - Prints a formatted message, followed by a quoted list of arguments. - -`void trace_strbuf(struct trace_key *key, const struct strbuf *data)`:: - - Prints the strbuf, without additional formatting (i.e. doesn't - choke on `%` or even `\0`). - -`uint64_t getnanotime(void)`:: - - Returns nanoseconds since the epoch (01/01/1970), typically used - for performance measurements. -+ -Currently there are high precision timer implementations for Linux (using -`clock_gettime(CLOCK_MONOTONIC)`) and Windows (`QueryPerformanceCounter`). -Other platforms use `gettimeofday` as time source. - -`void trace_performance(uint64_t nanos, const char *format, ...)`:: -`void trace_performance_since(uint64_t start, const char *format, ...)`:: - - Prints the elapsed time (in nanoseconds), or elapsed time since - `start`, followed by a formatted message. Enabled via environment - variable `GIT_TRACE_PERFORMANCE`. Used for manual profiling, e.g.: -+ ------------- -uint64_t start = getnanotime(); -/* code section to measure */ -trace_performance_since(start, "foobar"); ------------- -+ ------------- -uint64_t t = 0; -for (;;) { - /* ignore */ - t -= getnanotime(); - /* code section to measure */ - t += getnanotime(); - /* ignore */ -} -trace_performance(t, "frotz"); ------------- - -Bugs & Caveats --------------- - -GIT_TRACE_* environment variables can be used to tell Git to show -trace output to its standard error stream. Git can often spawn a pager -internally to run its subcommand and send its standard output and -standard error to it. - -Because GIT_TRACE_PERFORMANCE trace is generated only at the very end -of the program with atexit(), which happens after the pager exits, it -would not work well if you send its log to the standard error output -and let Git spawn the pager at the same time. - -As a work around, you can for example use '--no-pager', or set -GIT_TRACE_PERFORMANCE to another file descriptor which is redirected -to stderr, or set GIT_TRACE_PERFORMANCE to a file specified by its -absolute path. - -For example instead of the following command which by default may not -print any performance information: - ------------- -GIT_TRACE_PERFORMANCE=2 git log -1 ------------- - -you may want to use: - ------------- -GIT_TRACE_PERFORMANCE=2 git --no-pager log -1 ------------- - -or: - ------------- -GIT_TRACE_PERFORMANCE=3 3>&2 git log -1 ------------- - -or: - ------------- -GIT_TRACE_PERFORMANCE=/path/to/log/file git log -1 ------------- @@ -4,6 +4,82 @@ #include "git-compat-util.h" #include "strbuf.h" +/** + * The trace API can be used to print debug messages to stderr or a file. Trace + * code is inactive unless explicitly enabled by setting `GIT_TRACE*` environment + * variables. + * + * The trace implementation automatically adds `timestamp file:line ... \n` to + * all trace messages. E.g.: + * + * ------------ + * 23:59:59.123456 git.c:312 trace: built-in: git 'foo' + * 00:00:00.000001 builtin/foo.c:99 foo: some message + * ------------ + * + * Bugs & Caveats + * -------------- + * + * GIT_TRACE_* environment variables can be used to tell Git to show + * trace output to its standard error stream. Git can often spawn a pager + * internally to run its subcommand and send its standard output and + * standard error to it. + * + * Because GIT_TRACE_PERFORMANCE trace is generated only at the very end + * of the program with atexit(), which happens after the pager exits, it + * would not work well if you send its log to the standard error output + * and let Git spawn the pager at the same time. + * + * As a work around, you can for example use '--no-pager', or set + * GIT_TRACE_PERFORMANCE to another file descriptor which is redirected + * to stderr, or set GIT_TRACE_PERFORMANCE to a file specified by its + * absolute path. + * + * For example instead of the following command which by default may not + * print any performance information: + * + * ------------ + * GIT_TRACE_PERFORMANCE=2 git log -1 + * ------------ + * + * you may want to use: + * + * ------------ + * GIT_TRACE_PERFORMANCE=2 git --no-pager log -1 + * ------------ + * + * or: + * + * ------------ + * GIT_TRACE_PERFORMANCE=3 3>&2 git log -1 + * ------------ + * + * or: + * + * ------------ + * GIT_TRACE_PERFORMANCE=/path/to/log/file git log -1 + * ------------ + * + */ + +/** + * Defines a trace key (or category). The default (for API functions that + * don't take a key) is `GIT_TRACE`. + * + * E.g. to define a trace key controlled by environment variable `GIT_TRACE_FOO`: + * + * ------------ + * static struct trace_key trace_foo = TRACE_KEY_INIT(FOO); + * + * static void trace_print_foo(const char *message) + * { + * trace_printf_key(&trace_foo, "%s", message); + * } + * ------------ + * + * Note: don't use `const` as the trace implementation stores internal state in + * the `trace_key` structure. + */ struct trace_key { const char * const key; int fd; @@ -18,31 +94,84 @@ extern struct trace_key trace_perf_key; extern struct trace_key trace_setup_key; void trace_repo_setup(const char *prefix); + +/** + * Checks whether the trace key is enabled. Used to prevent expensive + * string formatting before calling one of the printing APIs. + */ int trace_want(struct trace_key *key); + +/** + * Disables tracing for the specified key, even if the environment variable + * was set. + */ void trace_disable(struct trace_key *key); + +/** + * Returns nanoseconds since the epoch (01/01/1970), typically used + * for performance measurements. + * Currently there are high precision timer implementations for Linux (using + * `clock_gettime(CLOCK_MONOTONIC)`) and Windows (`QueryPerformanceCounter`). + * Other platforms use `gettimeofday` as time source. + */ uint64_t getnanotime(void); + void trace_command_performance(const char **argv); void trace_verbatim(struct trace_key *key, const void *buf, unsigned len); uint64_t trace_performance_enter(void); #ifndef HAVE_VARIADIC_MACROS +/** + * Prints a formatted message, similar to printf. + */ __attribute__((format (printf, 1, 2))) void trace_printf(const char *format, ...); __attribute__((format (printf, 2, 3))) void trace_printf_key(struct trace_key *key, const char *format, ...); +/** + * Prints a formatted message, followed by a quoted list of arguments. + */ __attribute__((format (printf, 2, 3))) void trace_argv_printf(const char **argv, const char *format, ...); +/** + * Prints the strbuf, without additional formatting (i.e. doesn't + * choke on `%` or even `\0`). + */ void trace_strbuf(struct trace_key *key, const struct strbuf *data); -/* Prints elapsed time (in nanoseconds) if GIT_TRACE_PERFORMANCE is enabled. */ +/** + * Prints elapsed time (in nanoseconds) if GIT_TRACE_PERFORMANCE is enabled. + * + * Example: + * ------------ + * uint64_t t = 0; + * for (;;) { + * // ignore + * t -= getnanotime(); + * // code section to measure + * t += getnanotime(); + * // ignore + * } + * trace_performance(t, "frotz"); + * ------------ + */ __attribute__((format (printf, 2, 3))) void trace_performance(uint64_t nanos, const char *format, ...); -/* Prints elapsed time since 'start' if GIT_TRACE_PERFORMANCE is enabled. */ +/** + * Prints elapsed time since 'start' if GIT_TRACE_PERFORMANCE is enabled. + * + * Example: + * ------------ + * uint64_t start = getnanotime(); + * // code section to measure + * trace_performance_since(start, "foobar"); + * ------------ + */ __attribute__((format (printf, 2, 3))) void trace_performance_since(uint64_t start, const char *format, ...); |