diff options
267 files changed, 6771 insertions, 4136 deletions
@@ -21,6 +21,8 @@ Anders Kaseorg <andersk@MIT.EDU> <andersk@mit.edu> Aneesh Kumar K.V <aneesh.kumar@gmail.com> Amos Waterland <apw@debian.org> <apw@rossby.metr.ou.edu> Amos Waterland <apw@debian.org> <apw@us.ibm.com> +Ben Peart <benpeart@microsoft.com> <Ben.Peart@microsoft.com> +Ben Peart <benpeart@microsoft.com> <peartben@gmail.com> Ben Walton <bdwalton@gmail.com> <bwalton@artsci.utoronto.ca> Benoit Sigoure <tsunanet@gmail.com> <tsuna@lrde.epita.fr> Bernt Hansen <bernt@norang.ca> <bernt@alumni.uwaterloo.ca> @@ -32,6 +34,7 @@ Bryan Larsen <bryan@larsen.st> <bryanlarsen@yahoo.com> Cheng Renquan <crquan@gmail.com> Chris Shoemaker <c.shoemaker@cox.net> Chris Wright <chrisw@sous-sol.org> <chrisw@osdl.org> +Christian Ludwig <chrissicool@gmail.com> <chrissicool@googlemail.com> Cord Seele <cowose@gmail.com> <cowose@googlemail.com> Christian Couder <chriscool@tuxfamily.org> <christian.couder@gmail.com> Christian Stimming <stimming@tuhh.de> <chs@ckiste.goetheallee> @@ -51,6 +54,7 @@ David Reiss <dreiss@facebook.com> <dreiss@dreiss-vmware.(none)> David S. Miller <davem@davemloft.net> David Turner <novalis@novalis.org> <dturner@twopensource.com> David Turner <novalis@novalis.org> <dturner@twosigma.com> +Derrick Stolee <dstolee@microsoft.com> <stolee@gmail.com> Deskin Miller <deskinm@umich.edu> Dirk Süsserott <newsletter@dirk.my1.cc> Eric Blake <eblake@redhat.com> <ebb9@byu.net> @@ -98,6 +102,7 @@ Jens Axboe <axboe@kernel.dk> <jens.axboe@oracle.com> Jens Lindström <jl@opera.com> Jens Lindstrom <jl@opera.com> Jim Meyering <jim@meyering.net> <meyering@redhat.com> Joachim Berdal Haga <cjhaga@fys.uio.no> +Joachim Jablon <joachim.jablon@people-doc.com> <ewjoachim@gmail.com> Johannes Schindelin <Johannes.Schindelin@gmx.de> <johannes.schindelin@gmx.de> Johannes Sixt <j6t@kdbg.org> <J.Sixt@eudaptics.com> Johannes Sixt <j6t@kdbg.org> <j.sixt@viscovery.net> @@ -150,6 +155,7 @@ Mark Levedahl <mdl123@verizon.net> <mlevedahl@gmail.com> Mark Rada <marada@uwaterloo.ca> Martin Langhoff <martin@laptop.org> <martin@catalyst.net.nz> Martin von Zweigbergk <martinvonz@gmail.com> <martin.von.zweigbergk@gmail.com> +Masaya Suzuki <masayasuzuki@google.com> <draftcode@gmail.com> Matt Draisey <matt@draisey.ca> <mattdraisey@sympatico.ca> Matt Kraai <kraai@ftbfs.org> <matt.kraai@amo.abbott.com> Matt McCutchen <matt@mattmccutchen.net> <hashproduct@gmail.com> @@ -157,6 +163,7 @@ Matthias Kestenholz <matthias@spinlock.ch> <mk@spinlock.ch> Matthias Rüster <matthias.ruester@gmail.com> Matthias Ruester Matthias Urlichs <matthias@urlichs.de> <smurf@kiste.(none)> Matthias Urlichs <matthias@urlichs.de> <smurf@smurf.noris.de> +Matthieu Moy <git@matthieu-moy.fr> <Matthieu.Moy@imag.fr> Michael Coleman <tutufan@gmail.com> Michael J Gruber <git@grubix.eu> <michaeljgruber+gmane@fastmail.fm> Michael J Gruber <git@grubix.eu> <git@drmicha.warpmail.net> @@ -180,7 +187,11 @@ Nick Stokoe <nick@noodlefactory.co.uk> Nick Woolley <nick@noodlefactory.co.uk> Nick Stokoe <nick@noodlefactory.co.uk> Nick Woolley <nickwoolley@yahoo.co.uk> Nicolas Morey-Chaisemartin <devel-git@morey-chaisemartin.com> <nicolas.morey@free.fr> Nicolas Morey-Chaisemartin <devel-git@morey-chaisemartin.com> <nmorey@kalray.eu> +Nicolas Morey-Chaisemartin <devel-git@morey-chaisemartin.com> <nicolas@morey-chaisemartin.com> +Nicolas Morey-Chaisemartin <devel-git@morey-chaisemartin.com> <NMoreyChaisemartin@suse.com> +Nicolas Morey-Chaisemartin <devel-git@morey-chaisemartin.com> <nmoreychaisemartin@suse.com> Nicolas Sebrecht <nicolas.s.dev@gmx.fr> <ni.s@laposte.net> +Orgad Shaneh <orgads@gmail.com> <orgad.shaneh@audiocodes.com> Paolo Bonzini <bonzini@gnu.org> <paolo.bonzini@lu.unisi.ch> Pascal Obry <pascal@obry.net> <pascal.obry@gmail.com> Pascal Obry <pascal@obry.net> <pascal.obry@wanadoo.fr> @@ -200,6 +211,7 @@ Philipp A. Hartmann <pah@qo.cx> <ph@sorgh.de> Philippe Bruhat <book@cpan.org> Ralf Thielow <ralf.thielow@gmail.com> <ralf.thielow@googlemail.com> Ramsay Jones <ramsay@ramsayjones.plus.com> <ramsay@ramsay1.demon.co.uk> +Randall S. Becker <randall.becker@nexbridge.ca> <rsbecker@nexbridge.com> René Scharfe <l.s.r@web.de> <rene.scharfe@lsrfire.ath.cx> René Scharfe <l.s.r@web.de> Rene Scharfe Richard Hansen <rhansen@rhansen.org> <hansenr@google.com> @@ -238,6 +250,7 @@ Steven Walter <stevenrwalter@gmail.com> <swalter@lpdev.prtdev.lexmark.com> Sven Verdoolaege <skimo@kotnet.org> <Sven.Verdoolaege@cs.kuleuven.ac.be> Sven Verdoolaege <skimo@kotnet.org> <skimo@liacs.nl> SZEDER Gábor <szeder.dev@gmail.com> <szeder@ira.uka.de> +Tao Qingyun <taoqy@ls-a.me> <845767657@qq.com> Tay Ray Chuan <rctay89@gmail.com> Ted Percival <ted@midg3t.net> <ted.percival@quest.com> Theodore Ts'o <tytso@mit.edu> diff --git a/.travis.yml b/.travis.yml index 8d2499739e..a5a82d6832 100644 --- a/.travis.yml +++ b/.travis.yml @@ -12,16 +12,6 @@ compiler: - clang - gcc -addons: - apt: - sources: - - ubuntu-toolchain-r-test - packages: - - language-pack-is - - git-svn - - apache2 - - gcc-8 - matrix: include: - env: jobname=GETTEXT_POISON @@ -50,22 +40,11 @@ matrix: - env: jobname=StaticAnalysis os: linux compiler: - addons: - apt: - packages: - - coccinelle - before_install: script: ci/run-static-analysis.sh after_failure: - env: jobname=Documentation os: linux compiler: - addons: - apt: - packages: - - asciidoc - - xmlto - before_install: script: ci/test-documentation.sh after_failure: diff --git a/Documentation/Makefile b/Documentation/Makefile index 95f6a321f2..48d261dc2c 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -285,7 +285,7 @@ docdep_prereqs = \ mergetools-list.made $(mergetools_txt) \ cmd-list.made $(cmds_txt) -doc.dep : $(docdep_prereqs) $(wildcard *.txt) build-docdep.perl +doc.dep : $(docdep_prereqs) $(wildcard *.txt) $(wildcard config/*.txt) build-docdep.perl $(QUIET_GEN)$(RM) $@+ $@ && \ $(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \ mv $@+ $@ diff --git a/Documentation/RelNotes/2.20.0.txt b/Documentation/RelNotes/2.20.0.txt index 79217a7ad3..519c89407c 100644 --- a/Documentation/RelNotes/2.20.0.txt +++ b/Documentation/RelNotes/2.20.0.txt @@ -161,6 +161,18 @@ UI, Workflows & Features "--smtp-auth=none" option, even when the smtp username is given (which turns the authentication on by default). + * A fourth class of configuration files (in addition to the + traditional "system wide", "per user in the $HOME directory" and + "per repository in the $GIT_DIR/config") has been introduced so + that different worktrees that share the same repository (hence the + same $GIT_DIR/config file) can use different customization. + + * A pattern with '**' that does not have a slash on either side used + to be an invalid one, but the code now treats such double-asterisks + the same way as two normal asterisks that happen to be adjacent to + each other. + (merge e5bbe09e88 nd/wildmatch-double-asterisk later to maint). + Performance, Internal Implementation, Development Support etc. @@ -282,6 +294,44 @@ Performance, Internal Implementation, Development Support etc. * Windows port learned to use nano-second resolution file timestamps. + * The overly large Documentation/config.txt file have been split into + million little pieces. This potentially allows each individual piece + included into the manual page of the command it affects more easily. + + * Replace three string-list instances used as look-up tables in "git + fetch" with hashmaps. + + * Unify code to read the author-script used in "git am" and the + commands that use the sequencer machinery, e.g. "git rebase -i". + + * In preparation to the day when we can deprecate and remove the + "rebase -p", make sure we can skip and later remove tests for + it. + + * The history traversal used to implement the tag-following has been + optimized by introducing a new helper. + + * The helper function to refresh the cached stat information in the + in-core index has learned to perform the lstat() part of the + operation in parallel on multi-core platforms. + + * The code to traverse objects for reachability, used to decide what + objects are unreferenced and expendable, have been taught to also + consider per-worktree refs of other worktrees as starting points to + prevent data loss. + + * "git add" needs to internally run "diff-files" equivalent, and the + codepath learned the same optimization as "diff-files" has to run + lstat(2) in parallel to find which paths have been updated in the + working tree. + + * The procedure to install dependencies before testing at Travis CI + is getting revamped for both simplicity and flexibility, taking + advantage of the recent move to the vm-based environment. + + * The support for format-patch (and send-email) by the command-line + completion script (in contrib/) has been simplified a bit. + Fixes since v2.19 ----------------- @@ -447,6 +497,53 @@ Fixes since v2.19 '--verbose-log' option. (merge a5f52c6dab sg/test-verbose-log later to maint). + * A regression in Git 2.12 era made "git fsck" fall into an infinite + loop while processing truncated loose objects. + (merge 18ad13e5b2 jk/detect-truncated-zlib-input later to maint). + + * "git ls-remote $there foo" was broken by recent update for the + protocol v2 and stopped showing refs that match 'foo' that are not + refs/{heads,tags}/foo, which has been fixed. + (merge 6a139cdd74 jk/proto-v2-ref-prefix-fix later to maint). + + * Additional comment on a tricky piece of code to help developers. + (merge 0afbe3e806 jk/stream-pack-non-delta-clarification later to maint). + + * A couple of tests used to leave the repository in a state that is + deliberately corrupt, which have been corrected. + (merge aa984dbe5e ab/pack-tests-cleanup later to maint). + + * The submodule support has been updated to read from the blob at + HEAD:.gitmodules when the .gitmodules file is missing from the + working tree. + (merge 2b1257e463 ao/submodule-wo-gitmodules-checked-out later to maint). + + * "git fetch" was a bit loose in parsing responses from the other side + when talking over the protocol v2. + + * "git rev-parse --exclude=* --branches --branches" (i.e. first + saying "add only things that do not match '*' out of all branches" + and then adding all branches, without any exclusion this time") + worked as expected, but "--exclude=* --all --all" did not work the + same way, which has been fixed. + (merge 5221048092 ag/rev-parse-all-exclude-fix later to maint). + + * "git send-email --transfer-encoding=..." in recent versions of Git + sometimes produced an empty "Content-Transfer-Encoding:" header, + which has been corrected. + (merge 3c88e46f1a al/send-email-auto-cte-fixup later to maint). + + * The interface into "xdiff" library used to discover the offset and + size of a generated patch hunk by first formatting it into the + textual hunk header "@@ -n,m +k,l @@" and then parsing the numbers + out. A new interface has been introduced to allow callers a more + direct access to them. + (merge 5eade0746e jk/xdiff-interface later to maint). + + * Pathspec matching against a tree object were buggy when negative + pathspec elements were involved, which has been fixed. + (merge b7845cebc0 nd/tree-walk-path-exclusion later to maint). + * Code cleanup, docfix, build fix, etc. (merge 96a7501aad ts/doc-build-manpage-xsl-quietly later to maint). (merge b9b07efdb2 tg/conflict-marker-size later to maint). @@ -485,3 +582,4 @@ Fixes since v2.19 (merge aaaa881822 jk/uploadpack-packobjectshook-fix later to maint). (merge 3063477445 tb/char-may-be-unsigned later to maint). (merge 8c64bc9420 sg/test-rebase-editor-fix later to maint). + (merge 71571cd7d6 ma/sequencer-do-reset-saner-loop-termination later to maint). diff --git a/Documentation/config.txt b/Documentation/config.txt index 41a9ff2b6a..3e735f1a9a 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -2,8 +2,9 @@ CONFIGURATION FILE ------------------ The Git configuration file contains a number of variables that affect -the Git commands' behavior. The `.git/config` file in each repository -is used to store the configuration for that repository, and +the Git commands' behavior. The files `.git/config` and optionally +`config.worktree` (see `extensions.worktreeConfig` below) in each +repository are used to store the configuration for that repository, and `$HOME/.gitconfig` is used to store a per-user configuration as fallback values for the `.git/config` file. The file `/etc/gitconfig` can be used to store a system-wide default configuration. @@ -287,2880 +288,159 @@ inventing new variables for use in your own tool, make sure their names do not conflict with those that are used by Git itself and other popular tools, and describe them in your documentation. +include::config/advice.txt[] -advice.*:: - These variables control various optional help messages designed to - aid new users. All 'advice.*' variables default to 'true', and you - can tell Git that you do not need help by setting these to 'false': -+ --- - pushUpdateRejected:: - Set this variable to 'false' if you want to disable - 'pushNonFFCurrent', - 'pushNonFFMatching', 'pushAlreadyExists', - 'pushFetchFirst', and 'pushNeedsForce' - simultaneously. - pushNonFFCurrent:: - Advice shown when linkgit:git-push[1] fails due to a - non-fast-forward update to the current branch. - pushNonFFMatching:: - Advice shown when you ran linkgit:git-push[1] and pushed - 'matching refs' explicitly (i.e. you used ':', or - specified a refspec that isn't your current branch) and - it resulted in a non-fast-forward error. - pushAlreadyExists:: - Shown when linkgit:git-push[1] rejects an update that - does not qualify for fast-forwarding (e.g., a tag.) - pushFetchFirst:: - Shown when linkgit:git-push[1] rejects an update that - tries to overwrite a remote ref that points at an - object we do not have. - pushNeedsForce:: - Shown when linkgit:git-push[1] rejects an update that - tries to overwrite a remote ref that points at an - object that is not a commit-ish, or make the remote - ref point at an object that is not a commit-ish. - statusHints:: - Show directions on how to proceed from the current - state in the output of linkgit:git-status[1], in - the template shown when writing commit messages in - linkgit:git-commit[1], and in the help message shown - by linkgit:git-checkout[1] when switching branch. - statusUoption:: - Advise to consider using the `-u` option to linkgit:git-status[1] - when the command takes more than 2 seconds to enumerate untracked - files. - commitBeforeMerge:: - Advice shown when linkgit:git-merge[1] refuses to - merge to avoid overwriting local changes. - resolveConflict:: - Advice shown by various commands when conflicts - prevent the operation from being performed. - implicitIdentity:: - Advice on how to set your identity configuration when - your information is guessed from the system username and - domain name. - detachedHead:: - Advice shown when you used linkgit:git-checkout[1] to - move to the detach HEAD state, to instruct how to create - a local branch after the fact. - checkoutAmbiguousRemoteBranchName:: - Advice shown when the argument to - linkgit:git-checkout[1] ambiguously resolves to a - remote tracking branch on more than one remote in - situations where an unambiguous argument would have - otherwise caused a remote-tracking branch to be - checked out. See the `checkout.defaultRemote` - configuration variable for how to set a given remote - to used by default in some situations where this - advice would be printed. - amWorkDir:: - Advice that shows the location of the patch file when - linkgit:git-am[1] fails to apply it. - rmHints:: - In case of failure in the output of linkgit:git-rm[1], - show directions on how to proceed from the current state. - addEmbeddedRepo:: - Advice on what to do when you've accidentally added one - git repo inside of another. - ignoredHook:: - Advice shown if a hook is ignored because the hook is not - set as executable. - waitingForEditor:: - Print a message to the terminal whenever Git is waiting for - editor input from the user. --- - -core.fileMode:: - Tells Git if the executable bit of files in the working tree - is to be honored. -+ -Some filesystems lose the executable bit when a file that is -marked as executable is checked out, or checks out a -non-executable file with executable bit on. -linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem -to see if it handles the executable bit correctly -and this variable is automatically set as necessary. -+ -A repository, however, may be on a filesystem that handles -the filemode correctly, and this variable is set to 'true' -when created, but later may be made accessible from another -environment that loses the filemode (e.g. exporting ext4 via -CIFS mount, visiting a Cygwin created repository with -Git for Windows or Eclipse). -In such a case it may be necessary to set this variable to 'false'. -See linkgit:git-update-index[1]. -+ -The default is true (when core.filemode is not specified in the config file). - -core.hideDotFiles:: - (Windows-only) If true, mark newly-created directories and files whose - name starts with a dot as hidden. If 'dotGitOnly', only the `.git/` - directory is hidden, but no other files starting with a dot. The - default mode is 'dotGitOnly'. - -core.ignoreCase:: - Internal variable which enables various workarounds to enable - Git to work better on filesystems that are not case sensitive, - like APFS, HFS+, FAT, NTFS, etc. For example, if a directory listing - finds "makefile" when Git expects "Makefile", Git will assume - it is really the same file, and continue to remember it as - "Makefile". -+ -The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] -will probe and set core.ignoreCase true if appropriate when the repository -is created. -+ -Git relies on the proper configuration of this variable for your operating -and file system. Modifying this value may result in unexpected behavior. - -core.precomposeUnicode:: - This option is only used by Mac OS implementation of Git. - When core.precomposeUnicode=true, Git reverts the unicode decomposition - of filenames done by Mac OS. This is useful when sharing a repository - between Mac OS and Linux or Windows. - (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7). - When false, file names are handled fully transparent by Git, - which is backward compatible with older versions of Git. - -core.protectHFS:: - If set to true, do not allow checkout of paths that would - be considered equivalent to `.git` on an HFS+ filesystem. - Defaults to `true` on Mac OS, and `false` elsewhere. - -core.protectNTFS:: - If set to true, do not allow checkout of paths that would - cause problems with the NTFS filesystem, e.g. conflict with - 8.3 "short" names. - Defaults to `true` on Windows, and `false` elsewhere. - -core.fsmonitor:: - If set, the value of this variable is used as a command which - will identify all files that may have changed since the - requested date/time. This information is used to speed up git by - avoiding unnecessary processing of files that have not changed. - See the "fsmonitor-watchman" section of linkgit:githooks[5]. - -core.trustctime:: - If false, the ctime differences between the index and the - working tree are ignored; useful when the inode change time - is regularly modified by something outside Git (file system - crawlers and some backup systems). - See linkgit:git-update-index[1]. True by default. - -core.splitIndex:: - If true, the split-index feature of the index will be used. - See linkgit:git-update-index[1]. False by default. - -core.untrackedCache:: - Determines what to do about the untracked cache feature of the - index. It will be kept, if this variable is unset or set to - `keep`. It will automatically be added if set to `true`. And - it will automatically be removed, if set to `false`. Before - setting it to `true`, you should check that mtime is working - properly on your system. - See linkgit:git-update-index[1]. `keep` by default. - -core.checkStat:: - When missing or is set to `default`, many fields in the stat - structure are checked to detect if a file has been modified - since Git looked at it. When this configuration variable is - set to `minimal`, sub-second part of mtime and ctime, the - uid and gid of the owner of the file, the inode number (and - the device number, if Git was compiled to use it), are - excluded from the check among these fields, leaving only the - whole-second part of mtime (and ctime, if `core.trustCtime` - is set) and the filesize to be checked. -+ -There are implementations of Git that do not leave usable values in -some fields (e.g. JGit); by excluding these fields from the -comparison, the `minimal` mode may help interoperability when the -same repository is used by these other systems at the same time. - -core.quotePath:: - Commands that output paths (e.g. 'ls-files', 'diff'), will - quote "unusual" characters in the pathname by enclosing the - pathname in double-quotes and escaping those characters with - backslashes in the same way C escapes control characters (e.g. - `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with - values larger than 0x80 (e.g. octal `\302\265` for "micro" in - UTF-8). If this variable is set to false, bytes higher than - 0x80 are not considered "unusual" any more. Double-quotes, - backslash and control characters are always escaped regardless - of the setting of this variable. A simple space character is - not considered "unusual". Many commands can output pathnames - completely verbatim using the `-z` option. The default value - is true. - -core.eol:: - Sets the line ending type to use in the working directory for - files that have the `text` property set when core.autocrlf is false. - Alternatives are 'lf', 'crlf' and 'native', which uses the platform's - native line ending. The default value is `native`. See - linkgit:gitattributes[5] for more information on end-of-line - conversion. - -core.safecrlf:: - If true, makes Git check if converting `CRLF` is reversible when - end-of-line conversion is active. Git will verify if a command - modifies a file in the work tree either directly or indirectly. - For example, committing a file followed by checking out the - same file should yield the original file in the work tree. If - this is not the case for the current setting of - `core.autocrlf`, Git will reject the file. The variable can - be set to "warn", in which case Git will only warn about an - irreversible conversion but continue the operation. -+ -CRLF conversion bears a slight chance of corrupting data. -When it is enabled, Git will convert CRLF to LF during commit and LF to -CRLF during checkout. A file that contains a mixture of LF and -CRLF before the commit cannot be recreated by Git. For text -files this is the right thing to do: it corrects line endings -such that we have only LF line endings in the repository. -But for binary files that are accidentally classified as text the -conversion can corrupt data. -+ -If you recognize such corruption early you can easily fix it by -setting the conversion type explicitly in .gitattributes. Right -after committing you still have the original file in your work -tree and this file is not yet corrupted. You can explicitly tell -Git that this file is binary and Git will handle the file -appropriately. -+ -Unfortunately, the desired effect of cleaning up text files with -mixed line endings and the undesired effect of corrupting binary -files cannot be distinguished. In both cases CRLFs are removed -in an irreversible way. For text files this is the right thing -to do because CRLFs are line endings, while for binary files -converting CRLFs corrupts data. -+ -Note, this safety check does not mean that a checkout will generate a -file identical to the original file for a different setting of -`core.eol` and `core.autocrlf`, but only for the current one. For -example, a text file with `LF` would be accepted with `core.eol=lf` -and could later be checked out with `core.eol=crlf`, in which case the -resulting file would contain `CRLF`, although the original file -contained `LF`. However, in both work trees the line endings would be -consistent, that is either all `LF` or all `CRLF`, but never mixed. A -file with mixed line endings would be reported by the `core.safecrlf` -mechanism. - -core.autocrlf:: - Setting this variable to "true" is the same as setting - the `text` attribute to "auto" on all files and core.eol to "crlf". - Set to true if you want to have `CRLF` line endings in your - working directory and the repository has LF line endings. - This variable can be set to 'input', - in which case no output conversion is performed. - -core.checkRoundtripEncoding:: - A comma and/or whitespace separated list of encodings that Git - performs UTF-8 round trip checks on if they are used in an - `working-tree-encoding` attribute (see linkgit:gitattributes[5]). - The default value is `SHIFT-JIS`. - -core.symlinks:: - If false, symbolic links are checked out as small plain files that - contain the link text. linkgit:git-update-index[1] and - linkgit:git-add[1] will not change the recorded type to regular - file. Useful on filesystems like FAT that do not support - symbolic links. -+ -The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] -will probe and set core.symlinks false if appropriate when the repository -is created. - -core.gitProxy:: - A "proxy command" to execute (as 'command host port') instead - of establishing direct connection to the remote server when - using the Git protocol for fetching. If the variable value is - in the "COMMAND for DOMAIN" format, the command is applied only - on hostnames ending with the specified domain string. This variable - may be set multiple times and is matched in the given order; - the first match wins. -+ -Can be overridden by the `GIT_PROXY_COMMAND` environment variable -(which always applies universally, without the special "for" -handling). -+ -The special string `none` can be used as the proxy command to -specify that no proxy be used for a given domain pattern. -This is useful for excluding servers inside a firewall from -proxy use, while defaulting to a common proxy for external domains. - -core.sshCommand:: - If this variable is set, `git fetch` and `git push` will - use the specified command instead of `ssh` when they need to - connect to a remote system. The command is in the same form as - the `GIT_SSH_COMMAND` environment variable and is overridden - when the environment variable is set. - -core.ignoreStat:: - If true, Git will avoid using lstat() calls to detect if files have - changed by setting the "assume-unchanged" bit for those tracked files - which it has updated identically in both the index and working tree. -+ -When files are modified outside of Git, the user will need to stage -the modified files explicitly (e.g. see 'Examples' section in -linkgit:git-update-index[1]). -Git will not normally detect changes to those files. -+ -This is useful on systems where lstat() calls are very slow, such as -CIFS/Microsoft Windows. -+ -False by default. - -core.preferSymlinkRefs:: - Instead of the default "symref" format for HEAD - and other symbolic reference files, use symbolic links. - This is sometimes needed to work with old scripts that - expect HEAD to be a symbolic link. - -core.alternateRefsCommand:: - When advertising tips of available history from an alternate, use the shell to - execute the specified command instead of linkgit:git-for-each-ref[1]. The - first argument is the absolute path of the alternate. Output must contain one - hex object id per line (i.e., the same as produced by `git for-each-ref - --format='%(objectname)'`). -+ -Note that you cannot generally put `git for-each-ref` directly into the config -value, as it does not take a repository path as an argument (but you can wrap -the command above in a shell script). - -core.alternateRefsPrefixes:: - When listing references from an alternate, list only references that begin - with the given prefix. Prefixes match as if they were given as arguments to - linkgit:git-for-each-ref[1]. To list multiple prefixes, separate them with - whitespace. If `core.alternateRefsCommand` is set, setting - `core.alternateRefsPrefixes` has no effect. - -core.bare:: - If true this repository is assumed to be 'bare' and has no - working directory associated with it. If this is the case a - number of commands that require a working directory will be - disabled, such as linkgit:git-add[1] or linkgit:git-merge[1]. -+ -This setting is automatically guessed by linkgit:git-clone[1] or -linkgit:git-init[1] when the repository was created. By default a -repository that ends in "/.git" is assumed to be not bare (bare = -false), while all other repositories are assumed to be bare (bare -= true). - -core.worktree:: - Set the path to the root of the working tree. - If `GIT_COMMON_DIR` environment variable is set, core.worktree - is ignored and not used for determining the root of working tree. - This can be overridden by the `GIT_WORK_TREE` environment - variable and the `--work-tree` command-line option. - The value can be an absolute path or relative to the path to - the .git directory, which is either specified by --git-dir - or GIT_DIR, or automatically discovered. - If --git-dir or GIT_DIR is specified but none of - --work-tree, GIT_WORK_TREE and core.worktree is specified, - the current working directory is regarded as the top level - of your working tree. -+ -Note that this variable is honored even when set in a configuration -file in a ".git" subdirectory of a directory and its value differs -from the latter directory (e.g. "/path/to/.git/config" has -core.worktree set to "/different/path"), which is most likely a -misconfiguration. Running Git commands in the "/path/to" directory will -still use "/different/path" as the root of the work tree and can cause -confusion unless you know what you are doing (e.g. you are creating a -read-only snapshot of the same index to a location different from the -repository's usual working tree). - -core.logAllRefUpdates:: - Enable the reflog. Updates to a ref <ref> is logged to the file - "`$GIT_DIR/logs/<ref>`", by appending the new and old - SHA-1, the date/time and the reason of the update, but - only when the file exists. If this configuration - variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`" - file is automatically created for branch heads (i.e. under - `refs/heads/`), remote refs (i.e. under `refs/remotes/`), - note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`. - If it is set to `always`, then a missing reflog is automatically - created for any ref under `refs/`. -+ -This information can be used to determine what commit -was the tip of a branch "2 days ago". -+ -This value is true by default in a repository that has -a working directory associated with it, and false by -default in a bare repository. - -core.repositoryFormatVersion:: - Internal variable identifying the repository format and layout - version. - -core.sharedRepository:: - When 'group' (or 'true'), the repository is made shareable between - several users in a group (making sure all the files and objects are - group-writable). When 'all' (or 'world' or 'everybody'), the - repository will be readable by all users, additionally to being - group-shareable. When 'umask' (or 'false'), Git will use permissions - reported by umask(2). When '0xxx', where '0xxx' is an octal number, - files in the repository will have this mode value. '0xxx' will override - user's umask value (whereas the other options will only override - requested parts of the user's umask value). Examples: '0660' will make - the repo read/write-able for the owner and group, but inaccessible to - others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a - repository that is group-readable but not group-writable. - See linkgit:git-init[1]. False by default. - -core.warnAmbiguousRefs:: - If true, Git will warn you if the ref name you passed it is ambiguous - and might match multiple refs in the repository. True by default. - -core.compression:: - An integer -1..9, indicating a default compression level. - -1 is the zlib default. 0 means no compression, - and 1..9 are various speed/size tradeoffs, 9 being slowest. - If set, this provides a default to other compression variables, - such as `core.looseCompression` and `pack.compression`. - -core.looseCompression:: - An integer -1..9, indicating the compression level for objects that - are not in a pack file. -1 is the zlib default. 0 means no - compression, and 1..9 are various speed/size tradeoffs, 9 being - slowest. If not set, defaults to core.compression. If that is - not set, defaults to 1 (best speed). - -core.packedGitWindowSize:: - Number of bytes of a pack file to map into memory in a - single mapping operation. Larger window sizes may allow - your system to process a smaller number of large pack files - more quickly. Smaller window sizes will negatively affect - performance due to increased calls to the operating system's - memory manager, but may improve performance when accessing - a large number of large pack files. -+ -Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32 -MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should -be reasonable for all users/operating systems. You probably do -not need to adjust this value. -+ -Common unit suffixes of 'k', 'm', or 'g' are supported. +include::config/core.txt[] -core.packedGitLimit:: - Maximum number of bytes to map simultaneously into memory - from pack files. If Git needs to access more than this many - bytes at once to complete an operation it will unmap existing - regions to reclaim virtual address space within the process. -+ -Default is 256 MiB on 32 bit platforms and 32 TiB (effectively -unlimited) on 64 bit platforms. -This should be reasonable for all users/operating systems, except on -the largest projects. You probably do not need to adjust this value. -+ -Common unit suffixes of 'k', 'm', or 'g' are supported. - -core.deltaBaseCacheLimit:: - Maximum number of bytes to reserve for caching base objects - that may be referenced by multiple deltified objects. By storing the - entire decompressed base objects in a cache Git is able - to avoid unpacking and decompressing frequently used base - objects multiple times. -+ -Default is 96 MiB on all platforms. This should be reasonable -for all users/operating systems, except on the largest projects. -You probably do not need to adjust this value. -+ -Common unit suffixes of 'k', 'm', or 'g' are supported. - -core.bigFileThreshold:: - Files larger than this size are stored deflated, without - attempting delta compression. Storing large files without - delta compression avoids excessive memory usage, at the - slight expense of increased disk usage. Additionally files - larger than this size are always treated as binary. -+ -Default is 512 MiB on all platforms. This should be reasonable -for most projects as source code and other text files can still -be delta compressed, but larger binary media files won't be. -+ -Common unit suffixes of 'k', 'm', or 'g' are supported. - -core.excludesFile:: - Specifies the pathname to the file that contains patterns to - describe paths that are not meant to be tracked, in addition - to '.gitignore' (per-directory) and '.git/info/exclude'. - Defaults to `$XDG_CONFIG_HOME/git/ignore`. - If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore` - is used instead. See linkgit:gitignore[5]. - -core.askPass:: - Some commands (e.g. svn and http interfaces) that interactively - ask for a password can be told to use an external program given - via the value of this variable. Can be overridden by the `GIT_ASKPASS` - environment variable. If not set, fall back to the value of the - `SSH_ASKPASS` environment variable or, failing that, a simple password - prompt. The external program shall be given a suitable prompt as - command-line argument and write the password on its STDOUT. - -core.attributesFile:: - In addition to '.gitattributes' (per-directory) and - '.git/info/attributes', Git looks into this file for attributes - (see linkgit:gitattributes[5]). Path expansions are made the same - way as for `core.excludesFile`. Its default value is - `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not - set or empty, `$HOME/.config/git/attributes` is used instead. - -core.hooksPath:: - By default Git will look for your hooks in the - '$GIT_DIR/hooks' directory. Set this to different path, - e.g. '/etc/git/hooks', and Git will try to find your hooks in - that directory, e.g. '/etc/git/hooks/pre-receive' instead of - in '$GIT_DIR/hooks/pre-receive'. -+ -The path can be either absolute or relative. A relative path is -taken as relative to the directory where the hooks are run (see -the "DESCRIPTION" section of linkgit:githooks[5]). -+ -This configuration variable is useful in cases where you'd like to -centrally configure your Git hooks instead of configuring them on a -per-repository basis, or as a more flexible and centralized -alternative to having an `init.templateDir` where you've changed -default hooks. - -core.editor:: - Commands such as `commit` and `tag` that let you edit - messages by launching an editor use the value of this - variable when it is set, and the environment variable - `GIT_EDITOR` is not set. See linkgit:git-var[1]. - -core.commentChar:: - Commands such as `commit` and `tag` that let you edit - messages consider a line that begins with this character - commented, and removes them after the editor returns - (default '#'). -+ -If set to "auto", `git-commit` would select a character that is not -the beginning character of any line in existing commit messages. - -core.filesRefLockTimeout:: - The length of time, in milliseconds, to retry when trying to - lock an individual reference. Value 0 means not to retry at - all; -1 means to try indefinitely. Default is 100 (i.e., - retry for 100ms). - -core.packedRefsTimeout:: - The length of time, in milliseconds, to retry when trying to - lock the `packed-refs` file. Value 0 means not to retry at - all; -1 means to try indefinitely. Default is 1000 (i.e., - retry for 1 second). - -core.pager:: - Text viewer for use by Git commands (e.g., 'less'). The value - is meant to be interpreted by the shell. The order of preference - is the `$GIT_PAGER` environment variable, then `core.pager` - configuration, then `$PAGER`, and then the default chosen at - compile time (usually 'less'). -+ -When the `LESS` environment variable is unset, Git sets it to `FRX` -(if `LESS` environment variable is set, Git does not change it at -all). If you want to selectively override Git's default setting -for `LESS`, you can set `core.pager` to e.g. `less -S`. This will -be passed to the shell by Git, which will translate the final -command to `LESS=FRX less -S`. The environment does not set the -`S` option but the command line does, instructing less to truncate -long lines. Similarly, setting `core.pager` to `less -+F` will -deactivate the `F` option specified by the environment from the -command-line, deactivating the "quit if one screen" behavior of -`less`. One can specifically activate some flags for particular -commands: for example, setting `pager.blame` to `less -S` enables -line truncation only for `git blame`. -+ -Likewise, when the `LV` environment variable is unset, Git sets it -to `-c`. You can override this setting by exporting `LV` with -another value or setting `core.pager` to `lv +c`. - -core.whitespace:: - A comma separated list of common whitespace problems to - notice. 'git diff' will use `color.diff.whitespace` to - highlight them, and 'git apply --whitespace=error' will - consider them as errors. You can prefix `-` to disable - any of them (e.g. `-trailing-space`): -+ -* `blank-at-eol` treats trailing whitespaces at the end of the line - as an error (enabled by default). -* `space-before-tab` treats a space character that appears immediately - before a tab character in the initial indent part of the line as an - error (enabled by default). -* `indent-with-non-tab` treats a line that is indented with space - characters instead of the equivalent tabs as an error (not enabled by - default). -* `tab-in-indent` treats a tab character in the initial indent part of - the line as an error (not enabled by default). -* `blank-at-eof` treats blank lines added at the end of file as an error - (enabled by default). -* `trailing-space` is a short-hand to cover both `blank-at-eol` and - `blank-at-eof`. -* `cr-at-eol` treats a carriage-return at the end of line as - part of the line terminator, i.e. with it, `trailing-space` - does not trigger if the character before such a carriage-return - is not a whitespace (not enabled by default). -* `tabwidth=<n>` tells how many character positions a tab occupies; this - is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent` - errors. The default tab width is 8. Allowed values are 1 to 63. - -core.fsyncObjectFiles:: - This boolean will enable 'fsync()' when writing object files. -+ -This is a total waste of time and effort on a filesystem that orders -data writes properly, but can be useful for filesystems that do not use -journalling (traditional UNIX filesystems) or that only journal metadata -and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback"). +extensions.worktreeConfig:: + If set, by default "git config" reads from both "config" and + "config.worktree" file from GIT_DIR in that order. In + multiple working directory mode, "config" file is shared while + "config.worktree" is per-working directory (i.e., it's in + GIT_COMMON_DIR/worktrees/<id>/config.worktree) -core.preloadIndex:: - Enable parallel index preload for operations like 'git diff' -+ -This can speed up operations like 'git diff' and 'git status' especially -on filesystems like NFS that have weak caching semantics and thus -relatively high IO latencies. When enabled, Git will do the -index comparison to the filesystem data in parallel, allowing -overlapping IO's. Defaults to true. - -core.createObject:: - You can set this to 'link', in which case a hardlink followed by - a delete of the source are used to make sure that object creation - will not overwrite existing objects. -+ -On some file system/operating system combinations, this is unreliable. -Set this config setting to 'rename' there; However, This will remove the -check that makes sure that existing object files will not get overwritten. - -core.notesRef:: - When showing commit messages, also show notes which are stored in - the given ref. The ref must be fully qualified. If the given - ref does not exist, it is not an error but means that no - notes should be printed. -+ -This setting defaults to "refs/notes/commits", and it can be overridden by -the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1]. - -core.commitGraph:: - If true, then git will read the commit-graph file (if it exists) - to parse the graph structure of commits. Defaults to false. See - linkgit:git-commit-graph[1] for more information. - -core.useReplaceRefs:: - If set to `false`, behave as if the `--no-replace-objects` - option was given on the command line. See linkgit:git[1] and - linkgit:git-replace[1] for more information. - -core.multiPackIndex:: - Use the multi-pack-index file to track multiple packfiles using a - single index. See link:technical/multi-pack-index.html[the - multi-pack-index design document]. - -core.sparseCheckout:: - Enable "sparse checkout" feature. See section "Sparse checkout" in - linkgit:git-read-tree[1] for more information. - -core.abbrev:: - Set the length object names are abbreviated to. If - unspecified or set to "auto", an appropriate value is - computed based on the approximate number of packed objects - in your repository, which hopefully is enough for - abbreviated object names to stay unique for some time. - The minimum length is 4. - -add.ignoreErrors:: -add.ignore-errors (deprecated):: - Tells 'git add' to continue adding files when some files cannot be - added due to indexing errors. Equivalent to the `--ignore-errors` - option of linkgit:git-add[1]. `add.ignore-errors` is deprecated, - as it does not follow the usual naming convention for configuration - variables. - -alias.*:: - Command aliases for the linkgit:git[1] command wrapper - e.g. - after defining "alias.last = cat-file commit HEAD", the invocation - "git last" is equivalent to "git cat-file commit HEAD". To avoid - confusion and troubles with script usage, aliases that - hide existing Git commands are ignored. Arguments are split by - spaces, the usual shell quoting and escaping is supported. - A quote pair or a backslash can be used to quote them. -+ -If the alias expansion is prefixed with an exclamation point, -it will be treated as a shell command. For example, defining -"alias.new = !gitk --all --not ORIG_HEAD", the invocation -"git new" is equivalent to running the shell command -"gitk --all --not ORIG_HEAD". Note that shell commands will be -executed from the top-level directory of a repository, which may -not necessarily be the current directory. -`GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix' -from the original current directory. See linkgit:git-rev-parse[1]. - -am.keepcr:: - If true, git-am will call git-mailsplit for patches in mbox format - with parameter `--keep-cr`. In this case git-mailsplit will - not remove `\r` from lines ending with `\r\n`. Can be overridden - by giving `--no-keep-cr` from the command line. - See linkgit:git-am[1], linkgit:git-mailsplit[1]. - -am.threeWay:: - By default, `git am` will fail if the patch does not apply cleanly. When - set to true, this setting tells `git am` to fall back on 3-way merge if - the patch records the identity of blobs it is supposed to apply to and - we have those blobs available locally (equivalent to giving the `--3way` - option from the command line). Defaults to `false`. - See linkgit:git-am[1]. - -apply.ignoreWhitespace:: - When set to 'change', tells 'git apply' to ignore changes in - whitespace, in the same way as the `--ignore-space-change` - option. - When set to one of: no, none, never, false tells 'git apply' to - respect all whitespace differences. - See linkgit:git-apply[1]. - -apply.whitespace:: - Tells 'git apply' how to handle whitespaces, in the same way - as the `--whitespace` option. See linkgit:git-apply[1]. - -blame.blankBoundary:: - Show blank commit object name for boundary commits in - linkgit:git-blame[1]. This option defaults to false. - -blame.coloring:: - This determines the coloring scheme to be applied to blame - output. It can be 'repeatedLines', 'highlightRecent', - or 'none' which is the default. - -blame.date:: - Specifies the format used to output dates in linkgit:git-blame[1]. - If unset the iso format is used. For supported values, - see the discussion of the `--date` option at linkgit:git-log[1]. - -blame.showEmail:: - Show the author email instead of author name in linkgit:git-blame[1]. - This option defaults to false. - -blame.showRoot:: - Do not treat root commits as boundaries in linkgit:git-blame[1]. - This option defaults to false. - -branch.autoSetupMerge:: - Tells 'git branch' and 'git checkout' to set up new branches - so that linkgit:git-pull[1] will appropriately merge from the - starting point branch. Note that even if this option is not set, - this behavior can be chosen per-branch using the `--track` - and `--no-track` options. The valid settings are: `false` -- no - automatic setup is done; `true` -- automatic setup is done when the - starting point is a remote-tracking branch; `always` -- - automatic setup is done when the starting point is either a - local branch or remote-tracking - branch. This option defaults to true. - -branch.autoSetupRebase:: - When a new branch is created with 'git branch' or 'git checkout' - that tracks another branch, this variable tells Git to set - up pull to rebase instead of merge (see "branch.<name>.rebase"). - When `never`, rebase is never automatically set to true. - When `local`, rebase is set to true for tracked branches of - other local branches. - When `remote`, rebase is set to true for tracked branches of - remote-tracking branches. - When `always`, rebase will be set to true for all tracking - branches. - See "branch.autoSetupMerge" for details on how to set up a - branch to track another branch. - This option defaults to never. - -branch.sort:: - This variable controls the sort ordering of branches when displayed by - linkgit:git-branch[1]. Without the "--sort=<value>" option provided, the - value of this variable will be used as the default. - See linkgit:git-for-each-ref[1] field names for valid values. - -branch.<name>.remote:: - When on branch <name>, it tells 'git fetch' and 'git push' - which remote to fetch from/push to. The remote to push to - may be overridden with `remote.pushDefault` (for all branches). - The remote to push to, for the current branch, may be further - overridden by `branch.<name>.pushRemote`. If no remote is - configured, or if you are not on any branch, it defaults to - `origin` for fetching and `remote.pushDefault` for pushing. - Additionally, `.` (a period) is the current local repository - (a dot-repository), see `branch.<name>.merge`'s final note below. - -branch.<name>.pushRemote:: - When on branch <name>, it overrides `branch.<name>.remote` for - pushing. It also overrides `remote.pushDefault` for pushing - from branch <name>. When you pull from one place (e.g. your - upstream) and push to another place (e.g. your own publishing - repository), you would want to set `remote.pushDefault` to - specify the remote to push to for all branches, and use this - option to override it for a specific branch. - -branch.<name>.merge:: - Defines, together with branch.<name>.remote, the upstream branch - for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which - branch to merge and can also affect 'git push' (see push.default). - When in branch <name>, it tells 'git fetch' the default - refspec to be marked for merging in FETCH_HEAD. The value is - handled like the remote part of a refspec, and must match a - ref which is fetched from the remote given by - "branch.<name>.remote". - The merge information is used by 'git pull' (which at first calls - 'git fetch') to lookup the default branch for merging. Without - this option, 'git pull' defaults to merge the first refspec fetched. - Specify multiple values to get an octopus merge. - If you wish to setup 'git pull' so that it merges into <name> from - another branch in the local repository, you can point - branch.<name>.merge to the desired branch, and use the relative path - setting `.` (a period) for branch.<name>.remote. - -branch.<name>.mergeOptions:: - Sets default options for merging into branch <name>. The syntax and - supported options are the same as those of linkgit:git-merge[1], but - option values containing whitespace characters are currently not - supported. - -branch.<name>.rebase:: - When true, rebase the branch <name> on top of the fetched branch, - instead of merging the default branch from the default remote when - "git pull" is run. See "pull.rebase" for doing this in a non - branch-specific manner. -+ -When `merges`, pass the `--rebase-merges` option to 'git rebase' -so that the local merge commits are included in the rebase (see -linkgit:git-rebase[1] for details). -+ -When preserve, also pass `--preserve-merges` along to 'git rebase' -so that locally committed merge commits will not be flattened -by running 'git pull'. -+ -When the value is `interactive`, the rebase is run in interactive mode. -+ -*NOTE*: this is a possibly dangerous operation; do *not* use -it unless you understand the implications (see linkgit:git-rebase[1] -for details). - -branch.<name>.description:: - Branch description, can be edited with - `git branch --edit-description`. Branch description is - automatically added in the format-patch cover letter or - request-pull summary. - -browser.<tool>.cmd:: - Specify the command to invoke the specified browser. The - specified command is evaluated in shell with the URLs passed - as arguments. (See linkgit:git-web{litdd}browse[1].) - -browser.<tool>.path:: - Override the path for the given tool that may be used to - browse HTML help (see `-w` option in linkgit:git-help[1]) or a - working repository in gitweb (see linkgit:git-instaweb[1]). - -checkout.defaultRemote:: - When you run 'git checkout <something>' and only have one - remote, it may implicitly fall back on checking out and - tracking e.g. 'origin/<something>'. This stops working as soon - as you have more than one remote with a '<something>' - reference. This setting allows for setting the name of a - preferred remote that should always win when it comes to - disambiguation. The typical use-case is to set this to - `origin`. -+ -Currently this is used by linkgit:git-checkout[1] when 'git checkout -<something>' will checkout the '<something>' branch on another remote, -and by linkgit:git-worktree[1] when 'git worktree add' refers to a -remote branch. This setting might be used for other checkout-like -commands or functionality in the future. - -checkout.optimizeNewBranch:: - Optimizes the performance of "git checkout -b <new_branch>" when - using sparse-checkout. When set to true, git will not update the - repo based on the current sparse-checkout settings. This means it - will not update the skip-worktree bit in the index nor add/remove - files in the working directory to reflect the current sparse checkout - settings nor will it show the local changes. - -clean.requireForce:: - A boolean to make git-clean do nothing unless given -f, - -i or -n. Defaults to true. - -color.advice:: - A boolean to enable/disable color in hints (e.g. when a push - failed, see `advice.*` for a list). May be set to `always`, - `false` (or `never`) or `auto` (or `true`), in which case colors - are used only when the error output goes to a terminal. If - unset, then the value of `color.ui` is used (`auto` by default). - -color.advice.hint:: - Use customized color for hints. - -color.blame.highlightRecent:: - This can be used to color the metadata of a blame line depending - on age of the line. -+ -This setting should be set to a comma-separated list of color and date settings, -starting and ending with a color, the dates should be set from oldest to newest. -The metadata will be colored given the colors if the the line was introduced -before the given timestamp, overwriting older timestamped colors. -+ -Instead of an absolute timestamp relative timestamps work as well, e.g. -2.weeks.ago is valid to address anything older than 2 weeks. -+ -It defaults to 'blue,12 month ago,white,1 month ago,red', which colors -everything older than one year blue, recent changes between one month and -one year old are kept white, and lines introduced within the last month are -colored red. - -color.blame.repeatedLines:: - Use the customized color for the part of git-blame output that - is repeated meta information per line (such as commit id, - author name, date and timezone). Defaults to cyan. - -color.branch:: - A boolean to enable/disable color in the output of - linkgit:git-branch[1]. May be set to `always`, - `false` (or `never`) or `auto` (or `true`), in which case colors are used - only when the output is to a terminal. If unset, then the - value of `color.ui` is used (`auto` by default). - -color.branch.<slot>:: - Use customized color for branch coloration. `<slot>` is one of - `current` (the current branch), `local` (a local branch), - `remote` (a remote-tracking branch in refs/remotes/), - `upstream` (upstream tracking branch), `plain` (other - refs). - -color.diff:: - Whether to use ANSI escape sequences to add color to patches. - If this is set to `always`, linkgit:git-diff[1], - linkgit:git-log[1], and linkgit:git-show[1] will use color - for all patches. If it is set to `true` or `auto`, those - commands will only use color when output is to the terminal. - If unset, then the value of `color.ui` is used (`auto` by - default). -+ -This does not affect linkgit:git-format-patch[1] or the -'git-diff-{asterisk}' plumbing commands. Can be overridden on the -command line with the `--color[=<when>]` option. - -color.diff.<slot>:: - Use customized color for diff colorization. `<slot>` specifies - which part of the patch to use the specified color, and is one - of `context` (context text - `plain` is a historical synonym), - `meta` (metainformation), `frag` - (hunk header), 'func' (function in hunk header), `old` (removed lines), - `new` (added lines), `commit` (commit headers), `whitespace` - (highlighting whitespace errors), `oldMoved` (deleted lines), - `newMoved` (added lines), `oldMovedDimmed`, `oldMovedAlternative`, - `oldMovedAlternativeDimmed`, `newMovedDimmed`, `newMovedAlternative` - `newMovedAlternativeDimmed` (See the '<mode>' - setting of '--color-moved' in linkgit:git-diff[1] for details), - `contextDimmed`, `oldDimmed`, `newDimmed`, `contextBold`, - `oldBold`, and `newBold` (see linkgit:git-range-diff[1] for details). - -color.decorate.<slot>:: - Use customized color for 'git log --decorate' output. `<slot>` is one - of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local - branches, remote-tracking branches, tags, stash and HEAD, respectively - and `grafted` for grafted commits. - -color.grep:: - When set to `always`, always highlight matches. When `false` (or - `never`), never. When set to `true` or `auto`, use color only - when the output is written to the terminal. If unset, then the - value of `color.ui` is used (`auto` by default). - -color.grep.<slot>:: - Use customized color for grep colorization. `<slot>` specifies which - part of the line to use the specified color, and is one of -+ --- -`context`;; - non-matching text in context lines (when using `-A`, `-B`, or `-C`) -`filename`;; - filename prefix (when not using `-h`) -`function`;; - function name lines (when using `-p`) -`lineNumber`;; - line number prefix (when using `-n`) -`column`;; - column number prefix (when using `--column`) -`match`;; - matching text (same as setting `matchContext` and `matchSelected`) -`matchContext`;; - matching text in context lines -`matchSelected`;; - matching text in selected lines -`selected`;; - non-matching text in selected lines -`separator`;; - separators between fields on a line (`:`, `-`, and `=`) - and between hunks (`--`) --- - -color.interactive:: - When set to `always`, always use colors for interactive prompts - and displays (such as those used by "git-add --interactive" and - "git-clean --interactive"). When false (or `never`), never. - When set to `true` or `auto`, use colors only when the output is - to the terminal. If unset, then the value of `color.ui` is - used (`auto` by default). - -color.interactive.<slot>:: - Use customized color for 'git add --interactive' and 'git clean - --interactive' output. `<slot>` may be `prompt`, `header`, `help` - or `error`, for four distinct types of normal output from - interactive commands. - -color.pager:: - A boolean to enable/disable colored output when the pager is in - use (default is true). - -color.push:: - A boolean to enable/disable color in push errors. May be set to - `always`, `false` (or `never`) or `auto` (or `true`), in which - case colors are used only when the error output goes to a terminal. - If unset, then the value of `color.ui` is used (`auto` by default). - -color.push.error:: - Use customized color for push errors. - -color.remote:: - If set, keywords at the start of the line are highlighted. The - keywords are "error", "warning", "hint" and "success", and are - matched case-insensitively. May be set to `always`, `false` (or - `never`) or `auto` (or `true`). If unset, then the value of - `color.ui` is used (`auto` by default). - -color.remote.<slot>:: - Use customized color for each remote keyword. `<slot>` may be - `hint`, `warning`, `success` or `error` which match the - corresponding keyword. - -color.showBranch:: - A boolean to enable/disable color in the output of - linkgit:git-show-branch[1]. May be set to `always`, - `false` (or `never`) or `auto` (or `true`), in which case colors are used - only when the output is to a terminal. If unset, then the - value of `color.ui` is used (`auto` by default). - -color.status:: - A boolean to enable/disable color in the output of - linkgit:git-status[1]. May be set to `always`, - `false` (or `never`) or `auto` (or `true`), in which case colors are used - only when the output is to a terminal. If unset, then the - value of `color.ui` is used (`auto` by default). - -color.status.<slot>:: - Use customized color for status colorization. `<slot>` is - one of `header` (the header text of the status message), - `added` or `updated` (files which are added but not committed), - `changed` (files which are changed but not added in the index), - `untracked` (files which are not tracked by Git), - `branch` (the current branch), - `nobranch` (the color the 'no branch' warning is shown in, defaulting - to red), - `localBranch` or `remoteBranch` (the local and remote branch names, - respectively, when branch and tracking information is displayed in the - status short-format), or - `unmerged` (files which have unmerged changes). - -color.transport:: - A boolean to enable/disable color when pushes are rejected. May be - set to `always`, `false` (or `never`) or `auto` (or `true`), in which - case colors are used only when the error output goes to a terminal. - If unset, then the value of `color.ui` is used (`auto` by default). - -color.transport.rejected:: - Use customized color when a push was rejected. - -color.ui:: - This variable determines the default value for variables such - as `color.diff` and `color.grep` that control the use of color - per command family. Its scope will expand as more commands learn - configuration to set a default for the `--color` option. Set it - to `false` or `never` if you prefer Git commands not to use - color unless enabled explicitly with some other configuration - or the `--color` option. Set it to `always` if you want all - output not intended for machine consumption to use color, to - `true` or `auto` (this is the default since Git 1.8.4) if you - want such output to use color when written to the terminal. - -column.ui:: - Specify whether supported commands should output in columns. - This variable consists of a list of tokens separated by spaces - or commas: -+ -These options control when the feature should be enabled -(defaults to 'never'): -+ --- -`always`;; - always show in columns -`never`;; - never show in columns -`auto`;; - show in columns if the output is to the terminal --- -+ -These options control layout (defaults to 'column'). Setting any -of these implies 'always' if none of 'always', 'never', or 'auto' are -specified. -+ --- -`column`;; - fill columns before rows -`row`;; - fill rows before columns -`plain`;; - show in one column --- -+ -Finally, these options can be combined with a layout option (defaults -to 'nodense'): -+ --- -`dense`;; - make unequal size columns to utilize more space -`nodense`;; - make equal size columns --- - -column.branch:: - Specify whether to output branch listing in `git branch` in columns. - See `column.ui` for details. - -column.clean:: - Specify the layout when list items in `git clean -i`, which always - shows files and directories in columns. See `column.ui` for details. - -column.status:: - Specify whether to output untracked files in `git status` in columns. - See `column.ui` for details. - -column.tag:: - Specify whether to output tag listing in `git tag` in columns. - See `column.ui` for details. - -commit.cleanup:: - This setting overrides the default of the `--cleanup` option in - `git commit`. See linkgit:git-commit[1] for details. Changing the - default can be useful when you always want to keep lines that begin - with comment character `#` in your log message, in which case you - would do `git config commit.cleanup whitespace` (note that you will - have to remove the help lines that begin with `#` in the commit log - template yourself, if you do this). - -commit.gpgSign:: - - A boolean to specify whether all commits should be GPG signed. - Use of this option when doing operations such as rebase can - result in a large number of commits being signed. It may be - convenient to use an agent to avoid typing your GPG passphrase - several times. - -commit.status:: - A boolean to enable/disable inclusion of status information in the - commit message template when using an editor to prepare the commit - message. Defaults to true. - -commit.template:: - Specify the pathname of a file to use as the template for - new commit messages. - -commit.verbose:: - A boolean or int to specify the level of verbose with `git commit`. - See linkgit:git-commit[1]. - -credential.helper:: - Specify an external helper to be called when a username or - password credential is needed; the helper may consult external - storage to avoid prompting the user for the credentials. Note - that multiple helpers may be defined. See linkgit:gitcredentials[7] - for details. - -credential.useHttpPath:: - When acquiring credentials, consider the "path" component of an http - or https URL to be important. Defaults to false. See - linkgit:gitcredentials[7] for more information. - -credential.username:: - If no username is set for a network authentication, use this username - by default. See credential.<context>.* below, and - linkgit:gitcredentials[7]. - -credential.<url>.*:: - Any of the credential.* options above can be applied selectively to - some credentials. For example "credential.https://example.com.username" - would set the default username only for https connections to - example.com. See linkgit:gitcredentials[7] for details on how URLs are - matched. - -credentialCache.ignoreSIGHUP:: - Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting. - -completion.commands:: - This is only used by git-completion.bash to add or remove - commands from the list of completed commands. Normally only - porcelain commands and a few select others are completed. You - can add more commands, separated by space, in this - variable. Prefixing the command with '-' will remove it from - the existing list. - -include::diff-config.txt[] - -difftool.<tool>.path:: - Override the path for the given tool. This is useful in case - your tool is not in the PATH. - -difftool.<tool>.cmd:: - Specify the command to invoke the specified diff tool. - The specified command is evaluated in shell with the following - variables available: 'LOCAL' is set to the name of the temporary - file containing the contents of the diff pre-image and 'REMOTE' - is set to the name of the temporary file containing the contents - of the diff post-image. - -difftool.prompt:: - Prompt before each invocation of the diff tool. - -fastimport.unpackLimit:: - If the number of objects imported by linkgit:git-fast-import[1] - is below this limit, then the objects will be unpacked into - loose object files. However if the number of imported objects - equals or exceeds this limit then the pack will be stored as a - pack. Storing the pack from a fast-import can make the import - operation complete faster, especially on slow filesystems. If - not set, the value of `transfer.unpackLimit` is used instead. - -include::fetch-config.txt[] - -include::format-config.txt[] - -filter.<driver>.clean:: - The command which is used to convert the content of a worktree - file to a blob upon checkin. See linkgit:gitattributes[5] for - details. - -filter.<driver>.smudge:: - The command which is used to convert the content of a blob - object to a worktree file upon checkout. See - linkgit:gitattributes[5] for details. - -fsck.<msg-id>:: - During fsck git may find issues with legacy data which - wouldn't be generated by current versions of git, and which - wouldn't be sent over the wire if `transfer.fsckObjects` was - set. This feature is intended to support working with legacy - repositories containing such data. -+ -Setting `fsck.<msg-id>` will be picked up by linkgit:git-fsck[1], but -to accept pushes of such data set `receive.fsck.<msg-id>` instead, or -to clone or fetch it set `fetch.fsck.<msg-id>`. -+ -The rest of the documentation discusses `fsck.*` for brevity, but the -same applies for the corresponding `receive.fsck.*` and -`fetch.<msg-id>.*`. variables. -+ -Unlike variables like `color.ui` and `core.editor` the -`receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>` variables will not -fall back on the `fsck.<msg-id>` configuration if they aren't set. To -uniformly configure the same fsck settings in different circumstances -all three of them they must all set to the same values. -+ -When `fsck.<msg-id>` is set, errors can be switched to warnings and -vice versa by configuring the `fsck.<msg-id>` setting where the -`<msg-id>` is the fsck message ID and the value is one of `error`, -`warn` or `ignore`. For convenience, fsck prefixes the error/warning -with the message ID, e.g. "missingEmail: invalid author/committer line -- missing email" means that setting `fsck.missingEmail = ignore` will -hide that issue. -+ -In general, it is better to enumerate existing objects with problems -with `fsck.skipList`, instead of listing the kind of breakages these -problematic objects share to be ignored, as doing the latter will -allow new instances of the same breakages go unnoticed. -+ -Setting an unknown `fsck.<msg-id>` value will cause fsck to die, but -doing the same for `receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>` -will only cause git to warn. - -fsck.skipList:: - The path to a list of object names (i.e. one unabbreviated SHA-1 per - line) that are known to be broken in a non-fatal way and should - be ignored. On versions of Git 2.20 and later comments ('#'), empty - lines, and any leading and trailing whitespace is ignored. Everything - but a SHA-1 per line will error out on older versions. -+ -This feature is useful when an established project should be accepted -despite early commits containing errors that can be safely ignored -such as invalid committer email addresses. Note: corrupt objects -cannot be skipped with this setting. -+ -Like `fsck.<msg-id>` this variable has corresponding -`receive.fsck.skipList` and `fetch.fsck.skipList` variants. -+ -Unlike variables like `color.ui` and `core.editor` the -`receive.fsck.skipList` and `fetch.fsck.skipList` variables will not -fall back on the `fsck.skipList` configuration if they aren't set. To -uniformly configure the same fsck settings in different circumstances -all three of them they must all set to the same values. -+ -Older versions of Git (before 2.20) documented that the object names -list should be sorted. This was never a requirement, the object names -could appear in any order, but when reading the list we tracked whether -the list was sorted for the purposes of an internal binary search -implementation, which could save itself some work with an already sorted -list. Unless you had a humongous list there was no reason to go out of -your way to pre-sort the list. After Git version 2.20 a hash implementation -is used instead, so there's now no reason to pre-sort the list. - -gc.aggressiveDepth:: - The depth parameter used in the delta compression - algorithm used by 'git gc --aggressive'. This defaults - to 50. - -gc.aggressiveWindow:: - The window size parameter used in the delta compression - algorithm used by 'git gc --aggressive'. This defaults - to 250. - -gc.auto:: - When there are approximately more than this many loose - objects in the repository, `git gc --auto` will pack them. - Some Porcelain commands use this command to perform a - light-weight garbage collection from time to time. The - default value is 6700. Setting this to 0 disables it. - -gc.autoPackLimit:: - When there are more than this many packs that are not - marked with `*.keep` file in the repository, `git gc - --auto` consolidates them into one larger pack. The - default value is 50. Setting this to 0 disables it. - -gc.autoDetach:: - Make `git gc --auto` return immediately and run in background - if the system supports it. Default is true. - -gc.bigPackThreshold:: - If non-zero, all packs larger than this limit are kept when - `git gc` is run. This is very similar to `--keep-base-pack` - except that all packs that meet the threshold are kept, not - just the base pack. Defaults to zero. Common unit suffixes of - 'k', 'm', or 'g' are supported. -+ -Note that if the number of kept packs is more than gc.autoPackLimit, -this configuration variable is ignored, all packs except the base pack -will be repacked. After this the number of packs should go below -gc.autoPackLimit and gc.bigPackThreshold should be respected again. - -gc.writeCommitGraph:: - If true, then gc will rewrite the commit-graph file when - linkgit:git-gc[1] is run. When using linkgit:git-gc[1] - '--auto' the commit-graph will be updated if housekeeping is - required. Default is false. See linkgit:git-commit-graph[1] - for details. - -gc.logExpiry:: - If the file gc.log exists, then `git gc --auto` will print - its content and exit with status zero instead of running - unless that file is more than 'gc.logExpiry' old. Default is - "1.day". See `gc.pruneExpire` for more ways to specify its - value. - -gc.packRefs:: - Running `git pack-refs` in a repository renders it - unclonable by Git versions prior to 1.5.1.2 over dumb - transports such as HTTP. This variable determines whether - 'git gc' runs `git pack-refs`. This can be set to `notbare` - to enable it within all non-bare repos or it can be set to a - boolean value. The default is `true`. - -gc.pruneExpire:: - When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'. - Override the grace period with this config variable. The value - "now" may be used to disable this grace period and always prune - unreachable objects immediately, or "never" may be used to - suppress pruning. This feature helps prevent corruption when - 'git gc' runs concurrently with another process writing to the - repository; see the "NOTES" section of linkgit:git-gc[1]. - -gc.worktreePruneExpire:: - When 'git gc' is run, it calls - 'git worktree prune --expire 3.months.ago'. - This config variable can be used to set a different grace - period. The value "now" may be used to disable the grace - period and prune `$GIT_DIR/worktrees` immediately, or "never" - may be used to suppress pruning. - -gc.reflogExpire:: -gc.<pattern>.reflogExpire:: - 'git reflog expire' removes reflog entries older than - this time; defaults to 90 days. The value "now" expires all - entries immediately, and "never" suppresses expiration - altogether. With "<pattern>" (e.g. - "refs/stash") in the middle the setting applies only to - the refs that match the <pattern>. - -gc.reflogExpireUnreachable:: -gc.<pattern>.reflogExpireUnreachable:: - 'git reflog expire' removes reflog entries older than - this time and are not reachable from the current tip; - defaults to 30 days. The value "now" expires all entries - immediately, and "never" suppresses expiration altogether. - With "<pattern>" (e.g. "refs/stash") - in the middle, the setting applies only to the refs that - match the <pattern>. - -gc.rerereResolved:: - Records of conflicted merge you resolved earlier are - kept for this many days when 'git rerere gc' is run. - You can also use more human-readable "1.month.ago", etc. - The default is 60 days. See linkgit:git-rerere[1]. - -gc.rerereUnresolved:: - Records of conflicted merge you have not resolved are - kept for this many days when 'git rerere gc' is run. - You can also use more human-readable "1.month.ago", etc. - The default is 15 days. See linkgit:git-rerere[1]. - -include::gitcvs-config.txt[] - -gitweb.category:: -gitweb.description:: -gitweb.owner:: -gitweb.url:: - See linkgit:gitweb[1] for description. - -gitweb.avatar:: -gitweb.blame:: -gitweb.grep:: -gitweb.highlight:: -gitweb.patches:: -gitweb.pickaxe:: -gitweb.remote_heads:: -gitweb.showSizes:: -gitweb.snapshot:: - See linkgit:gitweb.conf[5] for description. - -grep.lineNumber:: - If set to true, enable `-n` option by default. - -grep.column:: - If set to true, enable the `--column` option by default. - -grep.patternType:: - Set the default matching behavior. Using a value of 'basic', 'extended', - 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`, - `--fixed-strings`, or `--perl-regexp` option accordingly, while the - value 'default' will return to the default matching behavior. - -grep.extendedRegexp:: - If set to true, enable `--extended-regexp` option by default. This - option is ignored when the `grep.patternType` option is set to a value - other than 'default'. - -grep.threads:: - Number of grep worker threads to use. - See `grep.threads` in linkgit:git-grep[1] for more information. - -grep.fallbackToNoIndex:: - If set to true, fall back to git grep --no-index if git grep - is executed outside of a git repository. Defaults to false. - -gpg.program:: - Use this custom program instead of "`gpg`" found on `$PATH` when - making or verifying a PGP signature. The program must support the - same command-line interface as GPG, namely, to verify a detached - signature, "`gpg --verify $file - <$signature`" is run, and the - program is expected to signal a good signature by exiting with - code 0, and to generate an ASCII-armored detached signature, the - standard input of "`gpg -bsau $key`" is fed with the contents to be - signed, and the program is expected to send the result to its - standard output. - -gpg.format:: - Specifies which key format to use when signing with `--gpg-sign`. - Default is "openpgp" and another possible value is "x509". - -gpg.<format>.program:: - Use this to customize the program used for the signing format you - chose. (see `gpg.program` and `gpg.format`) `gpg.program` can still - be used as a legacy synonym for `gpg.openpgp.program`. The default - value for `gpg.x509.program` is "gpgsm". - -include::gui-config.txt[] - -guitool.<name>.cmd:: - Specifies the shell command line to execute when the corresponding item - of the linkgit:git-gui[1] `Tools` menu is invoked. This option is - mandatory for every tool. The command is executed from the root of - the working directory, and in the environment it receives the name of - the tool as `GIT_GUITOOL`, the name of the currently selected file as - 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if - the head is detached, 'CUR_BRANCH' is empty). - -guitool.<name>.needsFile:: - Run the tool only if a diff is selected in the GUI. It guarantees - that 'FILENAME' is not empty. - -guitool.<name>.noConsole:: - Run the command silently, without creating a window to display its - output. - -guitool.<name>.noRescan:: - Don't rescan the working directory for changes after the tool - finishes execution. - -guitool.<name>.confirm:: - Show a confirmation dialog before actually running the tool. - -guitool.<name>.argPrompt:: - Request a string argument from the user, and pass it to the tool - through the `ARGS` environment variable. Since requesting an - argument implies confirmation, the 'confirm' option has no effect - if this is enabled. If the option is set to 'true', 'yes', or '1', - the dialog uses a built-in generic prompt; otherwise the exact - value of the variable is used. - -guitool.<name>.revPrompt:: - Request a single valid revision from the user, and set the - `REVISION` environment variable. In other aspects this option - is similar to 'argPrompt', and can be used together with it. - -guitool.<name>.revUnmerged:: - Show only unmerged branches in the 'revPrompt' subdialog. - This is useful for tools similar to merge or rebase, but not - for things like checkout or reset. - -guitool.<name>.title:: - Specifies the title to use for the prompt dialog. The default - is the tool name. - -guitool.<name>.prompt:: - Specifies the general prompt string to display at the top of - the dialog, before subsections for 'argPrompt' and 'revPrompt'. - The default value includes the actual command. - -help.browser:: - Specify the browser that will be used to display help in the - 'web' format. See linkgit:git-help[1]. - -help.format:: - Override the default help format used by linkgit:git-help[1]. - Values 'man', 'info', 'web' and 'html' are supported. 'man' is - the default. 'web' and 'html' are the same. - -help.autoCorrect:: - Automatically correct and execute mistyped commands after - waiting for the given number of deciseconds (0.1 sec). If more - than one command can be deduced from the entered text, nothing - will be executed. If the value of this option is negative, - the corrected command will be executed immediately. If the - value is 0 - the command will be just shown but not executed. - This is the default. - -help.htmlPath:: - Specify the path where the HTML documentation resides. File system paths - and URLs are supported. HTML pages will be prefixed with this path when - help is displayed in the 'web' format. This defaults to the documentation - path of your Git installation. - -http.proxy:: - Override the HTTP proxy, normally configured using the 'http_proxy', - 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In - addition to the syntax understood by curl, it is possible to specify a - proxy string with a user name but no password, in which case git will - attempt to acquire one in the same way it does for other credentials. See - linkgit:gitcredentials[7] for more information. The syntax thus is - '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden - on a per-remote basis; see remote.<name>.proxy - -http.proxyAuthMethod:: - Set the method with which to authenticate against the HTTP proxy. This - only takes effect if the configured proxy string contains a user name part - (i.e. is of the form 'user@host' or 'user@host:port'). This can be - overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`. - Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment - variable. Possible values are: -+ --- -* `anyauth` - Automatically pick a suitable authentication method. It is - assumed that the proxy answers an unauthenticated request with a 407 - status code and one or more Proxy-authenticate headers with supported - authentication methods. This is the default. -* `basic` - HTTP Basic authentication -* `digest` - HTTP Digest authentication; this prevents the password from being - transmitted to the proxy in clear text -* `negotiate` - GSS-Negotiate authentication (compare the --negotiate option - of `curl(1)`) -* `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`) --- - -http.emptyAuth:: - Attempt authentication without seeking a username or password. This - can be used to attempt GSS-Negotiate authentication without specifying - a username in the URL, as libcurl normally requires a username for - authentication. - -http.delegation:: - Control GSSAPI credential delegation. The delegation is disabled - by default in libcurl since version 7.21.7. Set parameter to tell - the server what it is allowed to delegate when it comes to user - credentials. Used with GSS/kerberos. Possible values are: -+ --- -* `none` - Don't allow any delegation. -* `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the - Kerberos service ticket, which is a matter of realm policy. -* `always` - Unconditionally allow the server to delegate. --- - - -http.extraHeader:: - Pass an additional HTTP header when communicating with a server. If - more than one such entry exists, all of them are added as extra - headers. To allow overriding the settings inherited from the system - config, an empty value will reset the extra headers to the empty list. - -http.cookieFile:: - The pathname of a file containing previously stored cookie lines, - which should be used - in the Git http session, if they match the server. The file format - of the file to read cookies from should be plain HTTP headers or - the Netscape/Mozilla cookie file format (see `curl(1)`). - NOTE that the file specified with http.cookieFile is used only as - input unless http.saveCookies is set. - -http.saveCookies:: - If set, store cookies received during requests to the file specified by - http.cookieFile. Has no effect if http.cookieFile is unset. - -http.sslVersion:: - The SSL version to use when negotiating an SSL connection, if you - want to force the default. The available and default version - depend on whether libcurl was built against NSS or OpenSSL and the - particular configuration of the crypto library in use. Internally - this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl - documentation for more details on the format of this option and - for the ssl version supported. Actually the possible values of - this option are: - - - sslv2 - - sslv3 - - tlsv1 - - tlsv1.0 - - tlsv1.1 - - tlsv1.2 - - tlsv1.3 +include::config/add.txt[] -+ -Can be overridden by the `GIT_SSL_VERSION` environment variable. -To force git to use libcurl's default ssl version and ignore any -explicit http.sslversion option, set `GIT_SSL_VERSION` to the -empty string. - -http.sslCipherList:: - A list of SSL ciphers to use when negotiating an SSL connection. - The available ciphers depend on whether libcurl was built against - NSS or OpenSSL and the particular configuration of the crypto - library in use. Internally this sets the 'CURLOPT_SSL_CIPHER_LIST' - option; see the libcurl documentation for more details on the format - of this list. -+ -Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable. -To force git to use libcurl's default cipher list and ignore any -explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the -empty string. - -http.sslVerify:: - Whether to verify the SSL certificate when fetching or pushing - over HTTPS. Defaults to true. Can be overridden by the - `GIT_SSL_NO_VERIFY` environment variable. - -http.sslCert:: - File containing the SSL certificate when fetching or pushing - over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment - variable. - -http.sslKey:: - File containing the SSL private key when fetching or pushing - over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment - variable. - -http.sslCertPasswordProtected:: - Enable Git's password prompt for the SSL certificate. Otherwise - OpenSSL will prompt the user, possibly many times, if the - certificate or private key is encrypted. Can be overridden by the - `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable. - -http.sslCAInfo:: - File containing the certificates to verify the peer with when - fetching or pushing over HTTPS. Can be overridden by the - `GIT_SSL_CAINFO` environment variable. - -http.sslCAPath:: - Path containing files with the CA certificates to verify the peer - with when fetching or pushing over HTTPS. Can be overridden - by the `GIT_SSL_CAPATH` environment variable. - -http.sslBackend:: - Name of the SSL backend to use (e.g. "openssl" or "schannel"). - This option is ignored if cURL lacks support for choosing the SSL - backend at runtime. - -http.schannelCheckRevoke:: - Used to enforce or disable certificate revocation checks in cURL - when http.sslBackend is set to "schannel". Defaults to `true` if - unset. Only necessary to disable this if Git consistently errors - and the message is about checking the revocation status of a - certificate. This option is ignored if cURL lacks support for - setting the relevant SSL option at runtime. - -http.schannelUseSSLCAInfo:: - As of cURL v7.60.0, the Secure Channel backend can use the - certificate bundle provided via `http.sslCAInfo`, but that would - override the Windows Certificate Store. Since this is not desirable - by default, Git will tell cURL not to use that bundle by default - when the `schannel` backend was configured via `http.sslBackend`, - unless `http.schannelUseSSLCAInfo` overrides this behavior. - -http.pinnedpubkey:: - Public key of the https service. It may either be the filename of - a PEM or DER encoded public key file or a string starting with - 'sha256//' followed by the base64 encoded sha256 hash of the - public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will - exit with an error if this option is set but not supported by - cURL. - -http.sslTry:: - Attempt to use AUTH SSL/TLS and encrypted data transfers - when connecting via regular FTP protocol. This might be needed - if the FTP server requires it for security reasons or you wish - to connect securely whenever remote FTP server supports it. - Default is false since it might trigger certificate verification - errors on misconfigured servers. - -http.maxRequests:: - How many HTTP requests to launch in parallel. Can be overridden - by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5. - -http.minSessions:: - The number of curl sessions (counted across slots) to be kept across - requests. They will not be ended with curl_easy_cleanup() until - http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this - value will be capped at 1. Defaults to 1. - -http.postBuffer:: - Maximum size in bytes of the buffer used by smart HTTP - transports when POSTing data to the remote system. - For requests larger than this buffer size, HTTP/1.1 and - Transfer-Encoding: chunked is used to avoid creating a - massive pack file locally. Default is 1 MiB, which is - sufficient for most requests. - -http.lowSpeedLimit, http.lowSpeedTime:: - If the HTTP transfer speed is less than 'http.lowSpeedLimit' - for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. - Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and - `GIT_HTTP_LOW_SPEED_TIME` environment variables. - -http.noEPSV:: - A boolean which disables using of EPSV ftp command by curl. - This can helpful with some "poor" ftp servers which don't - support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV` - environment variable. Default is false (curl will use EPSV). - -http.userAgent:: - The HTTP USER_AGENT string presented to an HTTP server. The default - value represents the version of the client Git such as git/1.7.1. - This option allows you to override this value to a more common value - such as Mozilla/4.0. This may be necessary, for instance, if - connecting through a firewall that restricts HTTP connections to a set - of common USER_AGENT strings (but not including those like git/1.7.1). - Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable. - -http.followRedirects:: - Whether git should follow HTTP redirects. If set to `true`, git - will transparently follow any redirect issued by a server it - encounters. If set to `false`, git will treat all redirects as - errors. If set to `initial`, git will follow redirects only for - the initial request to a remote, but not for subsequent - follow-up HTTP requests. Since git uses the redirected URL as - the base for the follow-up requests, this is generally - sufficient. The default is `initial`. - -http.<url>.*:: - Any of the http.* options above can be applied selectively to some URLs. - For a config key to match a URL, each element of the config key is - compared to that of the URL, in the following order: -+ --- -. Scheme (e.g., `https` in `https://example.com/`). This field - must match exactly between the config key and the URL. - -. Host/domain name (e.g., `example.com` in `https://example.com/`). - This field must match between the config key and the URL. It is - possible to specify a `*` as part of the host name to match all subdomains - at this level. `https://*.example.com/` for example would match - `https://foo.example.com/`, but not `https://foo.bar.example.com/`. - -. Port number (e.g., `8080` in `http://example.com:8080/`). - This field must match exactly between the config key and the URL. - Omitted port numbers are automatically converted to the correct - default for the scheme before matching. - -. Path (e.g., `repo.git` in `https://example.com/repo.git`). The - path field of the config key must match the path field of the URL - either exactly or as a prefix of slash-delimited path elements. This means - a config key with path `foo/` matches URL path `foo/bar`. A prefix can only - match on a slash (`/`) boundary. Longer matches take precedence (so a config - key with path `foo/bar` is a better match to URL path `foo/bar` than a config - key with just path `foo/`). - -. User name (e.g., `user` in `https://user@example.com/repo.git`). If - the config key has a user name it must match the user name in the - URL exactly. If the config key does not have a user name, that - config key will match a URL with any user name (including none), - but at a lower precedence than a config key with a user name. --- -+ -The list above is ordered by decreasing precedence; a URL that matches -a config key's path is preferred to one that matches its user name. For example, -if the URL is `https://user@example.com/foo/bar` a config key match of -`https://example.com/foo` will be preferred over a config key match of -`https://user@example.com`. -+ -All URLs are normalized before attempting any matching (the password part, -if embedded in the URL, is always ignored for matching purposes) so that -equivalent URLs that are simply spelled differently will match properly. -Environment variable settings always override any matches. The URLs that are -matched against are those given directly to Git commands. This means any URLs -visited as a result of a redirection do not participate in matching. - -ssh.variant:: - By default, Git determines the command line arguments to use - based on the basename of the configured SSH command (configured - using the environment variable `GIT_SSH` or `GIT_SSH_COMMAND` or - the config setting `core.sshCommand`). If the basename is - unrecognized, Git will attempt to detect support of OpenSSH - options by first invoking the configured SSH command with the - `-G` (print configuration) option and will subsequently use - OpenSSH options (if that is successful) or no options besides - the host and remote command (if it fails). -+ -The config variable `ssh.variant` can be set to override this detection. -Valid values are `ssh` (to use OpenSSH options), `plink`, `putty`, -`tortoiseplink`, `simple` (no options except the host and remote command). -The default auto-detection can be explicitly requested using the value -`auto`. Any other value is treated as `ssh`. This setting can also be -overridden via the environment variable `GIT_SSH_VARIANT`. -+ -The current command-line parameters used for each variant are as -follows: -+ --- +include::config/alias.txt[] -* `ssh` - [-p port] [-4] [-6] [-o option] [username@]host command +include::config/am.txt[] -* `simple` - [username@]host command +include::config/apply.txt[] -* `plink` or `putty` - [-P port] [-4] [-6] [username@]host command +include::config/blame.txt[] -* `tortoiseplink` - [-P port] [-4] [-6] -batch [username@]host command +include::config/branch.txt[] --- -+ -Except for the `simple` variant, command-line parameters are likely to -change as git gains new features. - -i18n.commitEncoding:: - Character encoding the commit messages are stored in; Git itself - does not care per se, but this information is necessary e.g. when - importing commits from emails or in the gitk graphical history - browser (and possibly at other places in the future or in other - porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'. - -i18n.logOutputEncoding:: - Character encoding the commit messages are converted to when - running 'git log' and friends. - -imap:: - The configuration variables in the 'imap' section are described - in linkgit:git-imap-send[1]. - -index.threads:: - Specifies the number of threads to spawn when loading the index. - This is meant to reduce index load time on multiprocessor machines. - Specifying 0 or 'true' will cause Git to auto-detect the number of - CPU's and set the number of threads accordingly. Specifying 1 or - 'false' will disable multithreading. Defaults to 'true'. - -index.version:: - Specify the version with which new index files should be - initialized. This does not affect existing repositories. - -init.templateDir:: - Specify the directory from which templates will be copied. - (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) - -instaweb.browser:: - Specify the program that will be used to browse your working - repository in gitweb. See linkgit:git-instaweb[1]. - -instaweb.httpd:: - The HTTP daemon command-line to start gitweb on your working - repository. See linkgit:git-instaweb[1]. - -instaweb.local:: - If true the web server started by linkgit:git-instaweb[1] will - be bound to the local IP (127.0.0.1). - -instaweb.modulePath:: - The default module path for linkgit:git-instaweb[1] to use - instead of /usr/lib/apache2/modules. Only used if httpd - is Apache. - -instaweb.port:: - The port number to bind the gitweb httpd to. See - linkgit:git-instaweb[1]. - -interactive.singleKey:: - In interactive commands, allow the user to provide one-letter - input with a single key (i.e., without hitting enter). - Currently this is used by the `--patch` mode of - linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], - linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this - setting is silently ignored if portable keystroke input - is not available; requires the Perl module Term::ReadKey. - -interactive.diffFilter:: - When an interactive command (such as `git add --patch`) shows - a colorized diff, git will pipe the diff through the shell - command defined by this configuration variable. The command may - mark up the diff further for human consumption, provided that it - retains a one-to-one correspondence with the lines in the - original diff. Defaults to disabled (no filtering). - -log.abbrevCommit:: - If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may - override this option with `--no-abbrev-commit`. - -log.date:: - Set the default date-time mode for the 'log' command. - Setting a value for log.date is similar to using 'git log''s - `--date` option. See linkgit:git-log[1] for details. - -log.decorate:: - Print out the ref names of any commits that are shown by the log - command. If 'short' is specified, the ref name prefixes 'refs/heads/', - 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is - specified, the full ref name (including prefix) will be printed. - If 'auto' is specified, then if the output is going to a terminal, - the ref names are shown as if 'short' were given, otherwise no ref - names are shown. This is the same as the `--decorate` option - of the `git log`. - -log.follow:: - If `true`, `git log` will act as if the `--follow` option was used when - a single <path> is given. This has the same limitations as `--follow`, - i.e. it cannot be used to follow multiple files and does not work well - on non-linear history. - -log.graphColors:: - A list of colors, separated by commas, that can be used to draw - history lines in `git log --graph`. - -log.showRoot:: - If true, the initial commit will be shown as a big creation event. - This is equivalent to a diff against an empty tree. - Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which - normally hide the root commit will now show it. True by default. - -log.showSignature:: - If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `--show-signature`. - -log.mailmap:: - If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `--use-mailmap`. - -mailinfo.scissors:: - If true, makes linkgit:git-mailinfo[1] (and therefore - linkgit:git-am[1]) act by default as if the --scissors option - was provided on the command-line. When active, this features - removes everything from the message body before a scissors - line (i.e. consisting mainly of ">8", "8<" and "-"). - -mailmap.file:: - The location of an augmenting mailmap file. The default - mailmap, located in the root of the repository, is loaded - first, then the mailmap file pointed to by this variable. - The location of the mailmap file may be in a repository - subdirectory, or somewhere outside of the repository itself. - See linkgit:git-shortlog[1] and linkgit:git-blame[1]. - -mailmap.blob:: - Like `mailmap.file`, but consider the value as a reference to a - blob in the repository. If both `mailmap.file` and - `mailmap.blob` are given, both are parsed, with entries from - `mailmap.file` taking precedence. In a bare repository, this - defaults to `HEAD:.mailmap`. In a non-bare repository, it - defaults to empty. - -man.viewer:: - Specify the programs that may be used to display help in the - 'man' format. See linkgit:git-help[1]. - -man.<tool>.cmd:: - Specify the command to invoke the specified man viewer. The - specified command is evaluated in shell with the man page - passed as argument. (See linkgit:git-help[1].) - -man.<tool>.path:: - Override the path for the given tool that may be used to - display help in the 'man' format. See linkgit:git-help[1]. - -include::merge-config.txt[] - -mergetool.<tool>.path:: - Override the path for the given tool. This is useful in case - your tool is not in the PATH. - -mergetool.<tool>.cmd:: - Specify the command to invoke the specified merge tool. The - specified command is evaluated in shell with the following - variables available: 'BASE' is the name of a temporary file - containing the common base of the files to be merged, if available; - 'LOCAL' is the name of a temporary file containing the contents of - the file on the current branch; 'REMOTE' is the name of a temporary - file containing the contents of the file from the branch being - merged; 'MERGED' contains the name of the file to which the merge - tool should write the results of a successful merge. - -mergetool.<tool>.trustExitCode:: - For a custom merge command, specify whether the exit code of - the merge command can be used to determine whether the merge was - successful. If this is not set to true then the merge target file - timestamp is checked and the merge assumed to have been successful - if the file has been updated, otherwise the user is prompted to - indicate the success of the merge. - -mergetool.meld.hasOutput:: - Older versions of `meld` do not support the `--output` option. - Git will attempt to detect whether `meld` supports `--output` - by inspecting the output of `meld --help`. Configuring - `mergetool.meld.hasOutput` will make Git skip these checks and - use the configured value instead. Setting `mergetool.meld.hasOutput` - to `true` tells Git to unconditionally use the `--output` option, - and `false` avoids using `--output`. - -mergetool.keepBackup:: - After performing a merge, the original file with conflict markers - can be saved as a file with a `.orig` extension. If this variable - is set to `false` then this file is not preserved. Defaults to - `true` (i.e. keep the backup files). - -mergetool.keepTemporaries:: - When invoking a custom merge tool, Git uses a set of temporary - files to pass to the tool. If the tool returns an error and this - variable is set to `true`, then these temporary files will be - preserved, otherwise they will be removed after the tool has - exited. Defaults to `false`. - -mergetool.writeToTemp:: - Git writes temporary 'BASE', 'LOCAL', and 'REMOTE' versions of - conflicting files in the worktree by default. Git will attempt - to use a temporary directory for these files when set `true`. - Defaults to `false`. - -mergetool.prompt:: - Prompt before each invocation of the merge resolution program. - -notes.mergeStrategy:: - Which merge strategy to choose by default when resolving notes - conflicts. Must be one of `manual`, `ours`, `theirs`, `union`, or - `cat_sort_uniq`. Defaults to `manual`. See "NOTES MERGE STRATEGIES" - section of linkgit:git-notes[1] for more information on each strategy. - -notes.<name>.mergeStrategy:: - Which merge strategy to choose when doing a notes merge into - refs/notes/<name>. This overrides the more general - "notes.mergeStrategy". See the "NOTES MERGE STRATEGIES" section in - linkgit:git-notes[1] for more information on the available strategies. - -notes.displayRef:: - The (fully qualified) refname from which to show notes when - showing commit messages. The value of this variable can be set - to a glob, in which case notes from all matching refs will be - shown. You may also specify this configuration variable - several times. A warning will be issued for refs that do not - exist, but a glob that does not match any refs is silently - ignored. -+ -This setting can be overridden with the `GIT_NOTES_DISPLAY_REF` -environment variable, which must be a colon separated list of refs or -globs. -+ -The effective value of "core.notesRef" (possibly overridden by -GIT_NOTES_REF) is also implicitly added to the list of refs to be -displayed. - -notes.rewrite.<command>:: - When rewriting commits with <command> (currently `amend` or - `rebase`) and this variable is set to `true`, Git - automatically copies your notes from the original to the - rewritten commit. Defaults to `true`, but see - "notes.rewriteRef" below. - -notes.rewriteMode:: - When copying notes during a rewrite (see the - "notes.rewrite.<command>" option), determines what to do if - the target commit already has a note. Must be one of - `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`. - Defaults to `concatenate`. -+ -This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` -environment variable. - -notes.rewriteRef:: - When copying notes during a rewrite, specifies the (fully - qualified) ref whose notes should be copied. The ref may be a - glob, in which case notes in all matching refs will be copied. - You may also specify this configuration several times. -+ -Does not have a default value; you must configure this variable to -enable note rewriting. Set it to `refs/notes/commits` to enable -rewriting for the default commit notes. -+ -This setting can be overridden with the `GIT_NOTES_REWRITE_REF` -environment variable, which must be a colon separated list of refs or -globs. - -pack.window:: - The size of the window used by linkgit:git-pack-objects[1] when no - window size is given on the command line. Defaults to 10. - -pack.depth:: - The maximum delta depth used by linkgit:git-pack-objects[1] when no - maximum depth is given on the command line. Defaults to 50. - Maximum value is 4095. - -pack.windowMemory:: - The maximum size of memory that is consumed by each thread - in linkgit:git-pack-objects[1] for pack window memory when - no limit is given on the command line. The value can be - suffixed with "k", "m", or "g". When left unconfigured (or - set explicitly to 0), there will be no limit. - -pack.compression:: - An integer -1..9, indicating the compression level for objects - in a pack file. -1 is the zlib default. 0 means no - compression, and 1..9 are various speed/size tradeoffs, 9 being - slowest. If not set, defaults to core.compression. If that is - not set, defaults to -1, the zlib default, which is "a default - compromise between speed and compression (currently equivalent - to level 6)." -+ -Note that changing the compression level will not automatically recompress -all existing objects. You can force recompression by passing the -F option -to linkgit:git-repack[1]. - -pack.island:: - An extended regular expression configuring a set of delta - islands. See "DELTA ISLANDS" in linkgit:git-pack-objects[1] - for details. - -pack.islandCore:: - Specify an island name which gets to have its objects be - packed first. This creates a kind of pseudo-pack at the front - of one pack, so that the objects from the specified island are - hopefully faster to copy into any pack that should be served - to a user requesting these objects. In practice this means - that the island specified should likely correspond to what is - the most commonly cloned in the repo. See also "DELTA ISLANDS" - in linkgit:git-pack-objects[1]. - -pack.deltaCacheSize:: - The maximum memory in bytes used for caching deltas in - linkgit:git-pack-objects[1] before writing them out to a pack. - This cache is used to speed up the writing object phase by not - having to recompute the final delta result once the best match - for all objects is found. Repacking large repositories on machines - which are tight with memory might be badly impacted by this though, - especially if this cache pushes the system into swapping. - A value of 0 means no limit. The smallest size of 1 byte may be - used to virtually disable this cache. Defaults to 256 MiB. - -pack.deltaCacheLimit:: - The maximum size of a delta, that is cached in - linkgit:git-pack-objects[1]. This cache is used to speed up the - writing object phase by not having to recompute the final delta - result once the best match for all objects is found. - Defaults to 1000. Maximum value is 65535. - -pack.threads:: - Specifies the number of threads to spawn when searching for best - delta matches. This requires that linkgit:git-pack-objects[1] - be compiled with pthreads otherwise this option is ignored with a - warning. This is meant to reduce packing time on multiprocessor - machines. The required amount of memory for the delta search window - is however multiplied by the number of threads. - Specifying 0 will cause Git to auto-detect the number of CPU's - and set the number of threads accordingly. - -pack.indexVersion:: - Specify the default pack index version. Valid values are 1 for - legacy pack index used by Git versions prior to 1.5.2, and 2 for - the new pack index with capabilities for packs larger than 4 GB - as well as proper protection against the repacking of corrupted - packs. Version 2 is the default. Note that version 2 is enforced - and this config option ignored whenever the corresponding pack is - larger than 2 GB. -+ -If you have an old Git that does not understand the version 2 `*.idx` file, -cloning or fetching over a non native protocol (e.g. "http") -that will copy both `*.pack` file and corresponding `*.idx` file from the -other side may give you a repository that cannot be accessed with your -older version of Git. If the `*.pack` file is smaller than 2 GB, however, -you can use linkgit:git-index-pack[1] on the *.pack file to regenerate -the `*.idx` file. - -pack.packSizeLimit:: - The maximum size of a pack. This setting only affects - packing to a file when repacking, i.e. the git:// protocol - is unaffected. It can be overridden by the `--max-pack-size` - option of linkgit:git-repack[1]. Reaching this limit results - in the creation of multiple packfiles; which in turn prevents - bitmaps from being created. - The minimum size allowed is limited to 1 MiB. - The default is unlimited. - Common unit suffixes of 'k', 'm', or 'g' are - supported. - -pack.useBitmaps:: - When true, git will use pack bitmaps (if available) when packing - to stdout (e.g., during the server side of a fetch). Defaults to - true. You should not generally need to turn this off unless - you are debugging pack bitmaps. - -pack.writeBitmaps (deprecated):: - This is a deprecated synonym for `repack.writeBitmaps`. - -pack.writeBitmapHashCache:: - When true, git will include a "hash cache" section in the bitmap - index (if one is written). This cache can be used to feed git's - delta heuristics, potentially leading to better deltas between - bitmapped and non-bitmapped objects (e.g., when serving a fetch - between an older, bitmapped pack and objects that have been - pushed since the last gc). The downside is that it consumes 4 - bytes per object of disk space, and that JGit's bitmap - implementation does not understand it, causing it to complain if - Git and JGit are used on the same repository. Defaults to false. - -pager.<cmd>:: - If the value is boolean, turns on or off pagination of the - output of a particular Git subcommand when writing to a tty. - Otherwise, turns on pagination for the subcommand using the - pager specified by the value of `pager.<cmd>`. If `--paginate` - or `--no-pager` is specified on the command line, it takes - precedence over this option. To disable pagination for all - commands, set `core.pager` or `GIT_PAGER` to `cat`. - -pretty.<name>:: - Alias for a --pretty= format string, as specified in - linkgit:git-log[1]. Any aliases defined here can be used just - as the built-in pretty formats could. For example, - running `git config pretty.changelog "format:* %H %s"` - would cause the invocation `git log --pretty=changelog` - to be equivalent to running `git log "--pretty=format:* %H %s"`. - Note that an alias with the same name as a built-in format - will be silently ignored. - -protocol.allow:: - If set, provide a user defined default policy for all protocols which - don't explicitly have a policy (`protocol.<name>.allow`). By default, - if unset, known-safe protocols (http, https, git, ssh, file) have a - default policy of `always`, known-dangerous protocols (ext) have a - default policy of `never`, and all other protocols have a default - policy of `user`. Supported policies: -+ --- +include::config/browser.txt[] -* `always` - protocol is always able to be used. +include::config/checkout.txt[] -* `never` - protocol is never able to be used. +include::config/clean.txt[] -* `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is - either unset or has a value of 1. This policy should be used when you want a - protocol to be directly usable by the user but don't want it used by commands which - execute clone/fetch/push commands without user input, e.g. recursive - submodule initialization. +include::config/color.txt[] --- +include::config/column.txt[] -protocol.<name>.allow:: - Set a policy to be used by protocol `<name>` with clone/fetch/push - commands. See `protocol.allow` above for the available policies. -+ -The protocol names currently used by git are: -+ --- - - `file`: any local file-based path (including `file://` URLs, - or local paths) - - - `git`: the anonymous git protocol over a direct TCP - connection (or proxy, if configured) - - - `ssh`: git over ssh (including `host:path` syntax, - `ssh://`, etc). - - - `http`: git over http, both "smart http" and "dumb http". - Note that this does _not_ include `https`; if you want to configure - both, you must do so individually. - - - any external helpers are named by their protocol (e.g., use - `hg` to allow the `git-remote-hg` helper) --- - -protocol.version:: - Experimental. If set, clients will attempt to communicate with a - server using the specified protocol version. If unset, no - attempt will be made by the client to communicate using a - particular protocol version, this results in protocol version 0 - being used. - Supported versions: -+ --- +include::config/commit.txt[] -* `0` - the original wire protocol. +include::config/credential.txt[] -* `1` - the original wire protocol with the addition of a version string - in the initial response from the server. +include::config/completion.txt[] -* `2` - link:technical/protocol-v2.html[wire protocol version 2]. +include::config/diff.txt[] --- +include::config/difftool.txt[] -include::pull-config.txt[] +include::config/fastimport.txt[] -include::push-config.txt[] +include::config/fetch.txt[] -include::rebase-config.txt[] +include::config/format.txt[] -include::receive-config.txt[] +include::config/filter.txt[] -remote.pushDefault:: - The remote to push to by default. Overrides - `branch.<name>.remote` for all branches, and is overridden by - `branch.<name>.pushRemote` for specific branches. +include::config/fsck.txt[] -remote.<name>.url:: - The URL of a remote repository. See linkgit:git-fetch[1] or - linkgit:git-push[1]. +include::config/gc.txt[] -remote.<name>.pushurl:: - The push URL of a remote repository. See linkgit:git-push[1]. +include::config/gitcvs.txt[] -remote.<name>.proxy:: - For remotes that require curl (http, https and ftp), the URL to - the proxy to use for that remote. Set to the empty string to - disable proxying for that remote. +include::config/gitweb.txt[] -remote.<name>.proxyAuthMethod:: - For remotes that require curl (http, https and ftp), the method to use for - authenticating against the proxy in use (probably set in - `remote.<name>.proxy`). See `http.proxyAuthMethod`. +include::config/grep.txt[] -remote.<name>.fetch:: - The default set of "refspec" for linkgit:git-fetch[1]. See - linkgit:git-fetch[1]. +include::config/gpg.txt[] -remote.<name>.push:: - The default set of "refspec" for linkgit:git-push[1]. See - linkgit:git-push[1]. +include::config/gui.txt[] -remote.<name>.mirror:: - If true, pushing to this remote will automatically behave - as if the `--mirror` option was given on the command line. +include::config/guitool.txt[] -remote.<name>.skipDefaultUpdate:: - If true, this remote will be skipped by default when updating - using linkgit:git-fetch[1] or the `update` subcommand of - linkgit:git-remote[1]. +include::config/help.txt[] -remote.<name>.skipFetchAll:: - If true, this remote will be skipped by default when updating - using linkgit:git-fetch[1] or the `update` subcommand of - linkgit:git-remote[1]. +include::config/http.txt[] -remote.<name>.receivepack:: - The default program to execute on the remote side when pushing. See - option --receive-pack of linkgit:git-push[1]. +include::config/i18n.txt[] -remote.<name>.uploadpack:: - The default program to execute on the remote side when fetching. See - option --upload-pack of linkgit:git-fetch-pack[1]. +include::config/imap.txt[] -remote.<name>.tagOpt:: - Setting this value to --no-tags disables automatic tag following when - fetching from remote <name>. Setting it to --tags will fetch every - tag from remote <name>, even if they are not reachable from remote - branch heads. Passing these flags directly to linkgit:git-fetch[1] can - override this setting. See options --tags and --no-tags of - linkgit:git-fetch[1]. +include::config/index.txt[] -remote.<name>.vcs:: - Setting this to a value <vcs> will cause Git to interact with - the remote with the git-remote-<vcs> helper. +include::config/init.txt[] -remote.<name>.prune:: - When set to true, fetching from this remote by default will also - remove any remote-tracking references that no longer exist on the - remote (as if the `--prune` option was given on the command line). - Overrides `fetch.prune` settings, if any. +include::config/instaweb.txt[] -remote.<name>.pruneTags:: - When set to true, fetching from this remote by default will also - remove any local tags that no longer exist on the remote if pruning - is activated in general via `remote.<name>.prune`, `fetch.prune` or - `--prune`. Overrides `fetch.pruneTags` settings, if any. -+ -See also `remote.<name>.prune` and the PRUNING section of -linkgit:git-fetch[1]. - -remotes.<group>:: - The list of remotes which are fetched by "git remote update - <group>". See linkgit:git-remote[1]. - -repack.useDeltaBaseOffset:: - By default, linkgit:git-repack[1] creates packs that use - delta-base offset. If you need to share your repository with - Git older than version 1.4.4, either directly or via a dumb - protocol such as http, then you need to set this option to - "false" and repack. Access from old Git versions over the - native protocol are unaffected by this option. - -repack.packKeptObjects:: - If set to true, makes `git repack` act as if - `--pack-kept-objects` was passed. See linkgit:git-repack[1] for - details. Defaults to `false` normally, but `true` if a bitmap - index is being written (either via `--write-bitmap-index` or - `repack.writeBitmaps`). - -repack.useDeltaIslands:: - If set to true, makes `git repack` act as if `--delta-islands` - was passed. Defaults to `false`. - -repack.writeBitmaps:: - When true, git will write a bitmap index when packing all - objects to disk (e.g., when `git repack -a` is run). This - index can speed up the "counting objects" phase of subsequent - packs created for clones and fetches, at the cost of some disk - space and extra time spent on the initial repack. This has - no effect if multiple packfiles are created. - Defaults to false. - -rerere.autoUpdate:: - When set to true, `git-rerere` updates the index with the - resulting contents after it cleanly resolves conflicts using - previously recorded resolution. Defaults to false. - -rerere.enabled:: - Activate recording of resolved conflicts, so that identical - conflict hunks can be resolved automatically, should they be - encountered again. By default, linkgit:git-rerere[1] is - enabled if there is an `rr-cache` directory under the - `$GIT_DIR`, e.g. if "rerere" was previously used in the - repository. - -include::sendemail-config.txt[] - -sequence.editor:: - Text editor used by `git rebase -i` for editing the rebase instruction file. - The value is meant to be interpreted by the shell when it is used. - It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. - When not configured the default commit message editor is used instead. - -showBranch.default:: - The default set of branches for linkgit:git-show-branch[1]. - See linkgit:git-show-branch[1]. - -splitIndex.maxPercentChange:: - When the split index feature is used, this specifies the - percent of entries the split index can contain compared to the - total number of entries in both the split index and the shared - index before a new shared index is written. - The value should be between 0 and 100. If the value is 0 then - a new shared index is always written, if it is 100 a new - shared index is never written. - By default the value is 20, so a new shared index is written - if the number of entries in the split index would be greater - than 20 percent of the total number of entries. - See linkgit:git-update-index[1]. - -splitIndex.sharedIndexExpire:: - When the split index feature is used, shared index files that - were not modified since the time this variable specifies will - be removed when a new shared index file is created. The value - "now" expires all entries immediately, and "never" suppresses - expiration altogether. - The default value is "2.weeks.ago". - Note that a shared index file is considered modified (for the - purpose of expiration) each time a new split-index file is - either created based on it or read from it. - See linkgit:git-update-index[1]. - -status.relativePaths:: - By default, linkgit:git-status[1] shows paths relative to the - current directory. Setting this variable to `false` shows paths - relative to the repository root (this was the default for Git - prior to v1.5.4). - -status.short:: - Set to true to enable --short by default in linkgit:git-status[1]. - The option --no-short takes precedence over this variable. - -status.branch:: - Set to true to enable --branch by default in linkgit:git-status[1]. - The option --no-branch takes precedence over this variable. - -status.displayCommentPrefix:: - If set to true, linkgit:git-status[1] will insert a comment - prefix before each output line (starting with - `core.commentChar`, i.e. `#` by default). This was the - behavior of linkgit:git-status[1] in Git 1.8.4 and previous. - Defaults to false. - -status.renameLimit:: - The number of files to consider when performing rename detection - in linkgit:git-status[1] and linkgit:git-commit[1]. Defaults to - the value of diff.renameLimit. - -status.renames:: - Whether and how Git detects renames in linkgit:git-status[1] and - linkgit:git-commit[1] . If set to "false", rename detection is - disabled. If set to "true", basic rename detection is enabled. - If set to "copies" or "copy", Git will detect copies, as well. - Defaults to the value of diff.renames. - -status.showStash:: - If set to true, linkgit:git-status[1] will display the number of - entries currently stashed away. - Defaults to false. - -status.showUntrackedFiles:: - By default, linkgit:git-status[1] and linkgit:git-commit[1] show - files which are not currently tracked by Git. Directories which - contain only untracked files, are shown with the directory name - only. Showing untracked files means that Git needs to lstat() all - the files in the whole repository, which might be slow on some - systems. So, this variable controls how the commands displays - the untracked files. Possible values are: -+ --- -* `no` - Show no untracked files. -* `normal` - Show untracked files and directories. -* `all` - Show also individual files in untracked directories. --- -+ -If this variable is not specified, it defaults to 'normal'. -This variable can be overridden with the -u|--untracked-files option -of linkgit:git-status[1] and linkgit:git-commit[1]. - -status.submoduleSummary:: - Defaults to false. - If this is set to a non zero number or true (identical to -1 or an - unlimited number), the submodule summary will be enabled and a - summary of commits for modified submodules will be shown (see - --summary-limit option of linkgit:git-submodule[1]). Please note - that the summary output command will be suppressed for all - submodules when `diff.ignoreSubmodules` is set to 'all' or only - for those submodules where `submodule.<name>.ignore=all`. The only - exception to that rule is that status and commit will show staged - submodule changes. To - also view the summary for ignored submodules you can either use - the --ignore-submodules=dirty command-line option or the 'git - submodule summary' command, which shows a similar output but does - not honor these settings. - -stash.showPatch:: - If this is set to true, the `git stash show` command without an - option will show the stash entry in patch form. Defaults to false. - See description of 'show' command in linkgit:git-stash[1]. - -stash.showStat:: - If this is set to true, the `git stash show` command without an - option will show diffstat of the stash entry. Defaults to true. - See description of 'show' command in linkgit:git-stash[1]. - -include::submodule-config.txt[] - -tag.forceSignAnnotated:: - A boolean to specify whether annotated tags created should be GPG signed. - If `--annotate` is specified on the command line, it takes - precedence over this option. - -tag.sort:: - This variable controls the sort ordering of tags when displayed by - linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the - value of this variable will be used as the default. - -tar.umask:: - This variable can be used to restrict the permission bits of - tar archive entries. The default is 0002, which turns off the - world write bit. The special value "user" indicates that the - archiving user's umask will be used instead. See umask(2) and - linkgit:git-archive[1]. - -transfer.fsckObjects:: - When `fetch.fsckObjects` or `receive.fsckObjects` are - not set, the value of this variable is used instead. - Defaults to false. -+ -When set, the fetch or receive will abort in the case of a malformed -object or a link to a nonexistent object. In addition, various other -issues are checked for, including legacy issues (see `fsck.<msg-id>`), -and potential security issues like the existence of a `.GIT` directory -or a malicious `.gitmodules` file (see the release notes for v2.2.1 -and v2.17.1 for details). Other sanity and security checks may be -added in future releases. -+ -On the receiving side, failing fsckObjects will make those objects -unreachable, see "QUARANTINE ENVIRONMENT" in -linkgit:git-receive-pack[1]. On the fetch side, malformed objects will -instead be left unreferenced in the repository. -+ -Due to the non-quarantine nature of the `fetch.fsckObjects` -implementation it can not be relied upon to leave the object store -clean like `receive.fsckObjects` can. -+ -As objects are unpacked they're written to the object store, so there -can be cases where malicious objects get introduced even though the -"fetch" failed, only to have a subsequent "fetch" succeed because only -new incoming objects are checked, not those that have already been -written to the object store. That difference in behavior should not be -relied upon. In the future, such objects may be quarantined for -"fetch" as well. -+ -For now, the paranoid need to find some way to emulate the quarantine -environment if they'd like the same protection as "push". E.g. in the -case of an internal mirror do the mirroring in two steps, one to fetch -the untrusted objects, and then do a second "push" (which will use the -quarantine) to another internal repo, and have internal clients -consume this pushed-to repository, or embargo internal fetches and -only allow them once a full "fsck" has run (and no new fetches have -happened in the meantime). - -transfer.hideRefs:: - String(s) `receive-pack` and `upload-pack` use to decide which - refs to omit from their initial advertisements. Use more than - one definition to specify multiple prefix strings. A ref that is - under the hierarchies listed in the value of this variable is - excluded, and is hidden when responding to `git push` or `git - fetch`. See `receive.hideRefs` and `uploadpack.hideRefs` for - program-specific versions of this config. -+ -You may also include a `!` in front of the ref name to negate the entry, -explicitly exposing it, even if an earlier entry marked it as hidden. -If you have multiple hideRefs values, later entries override earlier ones -(and entries in more-specific config files override less-specific ones). -+ -If a namespace is in use, the namespace prefix is stripped from each -reference before it is matched against `transfer.hiderefs` patterns. -For example, if `refs/heads/master` is specified in `transfer.hideRefs` and -the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master` -is omitted from the advertisements but `refs/heads/master` and -`refs/namespaces/bar/refs/heads/master` are still advertised as so-called -"have" lines. In order to match refs before stripping, add a `^` in front of -the ref name. If you combine `!` and `^`, `!` must be specified first. -+ -Even if you hide refs, a client may still be able to steal the target -objects via the techniques described in the "SECURITY" section of the -linkgit:gitnamespaces[7] man page; it's best to keep private data in a -separate repository. - -transfer.unpackLimit:: - When `fetch.unpackLimit` or `receive.unpackLimit` are - not set, the value of this variable is used instead. - The default value is 100. - -uploadarchive.allowUnreachable:: - If true, allow clients to use `git archive --remote` to request - any tree, whether reachable from the ref tips or not. See the - discussion in the "SECURITY" section of - linkgit:git-upload-archive[1] for more details. Defaults to - `false`. - -uploadpack.hideRefs:: - This variable is the same as `transfer.hideRefs`, but applies - only to `upload-pack` (and so affects only fetches, not pushes). - An attempt to fetch a hidden ref by `git fetch` will fail. See - also `uploadpack.allowTipSHA1InWant`. - -uploadpack.allowTipSHA1InWant:: - When `uploadpack.hideRefs` is in effect, allow `upload-pack` - to accept a fetch request that asks for an object at the tip - of a hidden ref (by default, such a request is rejected). - See also `uploadpack.hideRefs`. Even if this is false, a client - may be able to steal objects via the techniques described in the - "SECURITY" section of the linkgit:gitnamespaces[7] man page; it's - best to keep private data in a separate repository. - -uploadpack.allowReachableSHA1InWant:: - Allow `upload-pack` to accept a fetch request that asks for an - object that is reachable from any ref tip. However, note that - calculating object reachability is computationally expensive. - Defaults to `false`. Even if this is false, a client may be able - to steal objects via the techniques described in the "SECURITY" - section of the linkgit:gitnamespaces[7] man page; it's best to - keep private data in a separate repository. - -uploadpack.allowAnySHA1InWant:: - Allow `upload-pack` to accept a fetch request that asks for any - object at all. - Defaults to `false`. - -uploadpack.keepAlive:: - When `upload-pack` has started `pack-objects`, there may be a - quiet period while `pack-objects` prepares the pack. Normally - it would output progress information, but if `--quiet` was used - for the fetch, `pack-objects` will output nothing at all until - the pack data begins. Some clients and networks may consider - the server to be hung and give up. Setting this option instructs - `upload-pack` to send an empty keepalive packet every - `uploadpack.keepAlive` seconds. Setting this option to 0 - disables keepalive packets entirely. The default is 5 seconds. - -uploadpack.packObjectsHook:: - If this option is set, when `upload-pack` would run - `git pack-objects` to create a packfile for a client, it will - run this shell command instead. The `pack-objects` command and - arguments it _would_ have run (including the `git pack-objects` - at the beginning) are appended to the shell command. The stdin - and stdout of the hook are treated as if `pack-objects` itself - was run. I.e., `upload-pack` will feed input intended for - `pack-objects` to the hook, and expects a completed packfile on - stdout. -+ -Note that this configuration variable is ignored if it is seen in the -repository-level config (this is a safety measure against fetching from -untrusted repositories). - -uploadpack.allowFilter:: - If this option is set, `upload-pack` will support partial - clone and partial fetch object filtering. - -uploadpack.allowRefInWant:: - If this option is set, `upload-pack` will support the `ref-in-want` - feature of the protocol version 2 `fetch` command. This feature - is intended for the benefit of load-balanced servers which may - not have the same view of what OIDs their refs point to due to - replication delay. - -url.<base>.insteadOf:: - Any URL that starts with this value will be rewritten to - start, instead, with <base>. In cases where some site serves a - large number of repositories, and serves them with multiple - access methods, and some users need to use different access - methods, this feature allows people to specify any of the - equivalent URLs and have Git automatically rewrite the URL to - the best alternative for the particular user, even for a - never-before-seen repository on the site. When more than one - insteadOf strings match a given URL, the longest match is used. -+ -Note that any protocol restrictions will be applied to the rewritten -URL. If the rewrite changes the URL to use a custom protocol or remote -helper, you may need to adjust the `protocol.*.allow` config to permit -the request. In particular, protocols you expect to use for submodules -must be set to `always` rather than the default of `user`. See the -description of `protocol.allow` above. - -url.<base>.pushInsteadOf:: - Any URL that starts with this value will not be pushed to; - instead, it will be rewritten to start with <base>, and the - resulting URL will be pushed to. In cases where some site serves - a large number of repositories, and serves them with multiple - access methods, some of which do not allow push, this feature - allows people to specify a pull-only URL and have Git - automatically use an appropriate URL to push, even for a - never-before-seen repository on the site. When more than one - pushInsteadOf strings match a given URL, the longest match is - used. If a remote has an explicit pushurl, Git will ignore this - setting for that remote. - -user.email:: - Your email address to be recorded in any newly created commits. - Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and - `EMAIL` environment variables. See linkgit:git-commit-tree[1]. - -user.name:: - Your full name to be recorded in any newly created commits. - Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME` - environment variables. See linkgit:git-commit-tree[1]. - -user.useConfigOnly:: - Instruct Git to avoid trying to guess defaults for `user.email` - and `user.name`, and instead retrieve the values only from the - configuration. For example, if you have multiple email addresses - and would like to use a different one for each repository, then - with this configuration option set to `true` in the global config - along with a name, Git will prompt you to set up an email before - making new commits in a newly cloned repository. - Defaults to `false`. - -user.signingKey:: - If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the - key you want it to automatically when creating a signed tag or - commit, you can override the default selection with this variable. - This option is passed unchanged to gpg's --local-user parameter, - so you may specify a key using any method that gpg supports. - -versionsort.prereleaseSuffix (deprecated):: - Deprecated alias for `versionsort.suffix`. Ignored if - `versionsort.suffix` is set. - -versionsort.suffix:: - Even when version sort is used in linkgit:git-tag[1], tagnames - with the same base version but different suffixes are still sorted - lexicographically, resulting e.g. in prerelease tags appearing - after the main release (e.g. "1.0-rc1" after "1.0"). This - variable can be specified to determine the sorting order of tags - with different suffixes. -+ -By specifying a single suffix in this variable, any tagname containing -that suffix will appear before the corresponding main release. E.g. if -the variable is set to "-rc", then all "1.0-rcX" tags will appear before -"1.0". If specified multiple times, once per suffix, then the order of -suffixes in the configuration will determine the sorting order of tagnames -with those suffixes. E.g. if "-pre" appears before "-rc" in the -configuration, then all "1.0-preX" tags will be listed before any -"1.0-rcX" tags. The placement of the main release tag relative to tags -with various suffixes can be determined by specifying the empty suffix -among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and -"-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags -are listed first, followed by "v4.8", then "v4.8-ckX" and finally -"v4.8-bfsX". -+ -If more than one suffixes match the same tagname, then that tagname will -be sorted according to the suffix which starts at the earliest position in -the tagname. If more than one different matching suffixes start at -that earliest position, then that tagname will be sorted according to the -longest of those suffixes. -The sorting order between different suffixes is undefined if they are -in multiple config files. - -web.browser:: - Specify a web browser that may be used by some commands. - Currently only linkgit:git-instaweb[1] and linkgit:git-help[1] - may use it. - -worktree.guessRemote:: - With `add`, if no branch argument, and neither of `-b` nor - `-B` nor `--detach` are given, the command defaults to - creating a new branch from HEAD. If `worktree.guessRemote` is - set to true, `worktree add` tries to find a remote-tracking - branch whose name uniquely matches the new branch name. If - such a branch exists, it is checked out and set as "upstream" - for the new branch. If no such match can be found, it falls - back to creating a new branch from the current HEAD. +include::config/interactive.txt[] + +include::config/log.txt[] + +include::config/mailinfo.txt[] + +include::config/mailmap.txt[] + +include::config/man.txt[] + +include::config/merge.txt[] + +include::config/mergetool.txt[] + +include::config/notes.txt[] + +include::config/pack.txt[] + +include::config/pager.txt[] + +include::config/pretty.txt[] + +include::config/protocol.txt[] + +include::config/pull.txt[] + +include::config/push.txt[] + +include::config/rebase.txt[] + +include::config/receive.txt[] + +include::config/remote.txt[] + +include::config/remotes.txt[] + +include::config/repack.txt[] + +include::config/rerere.txt[] + +include::config/reset.txt[] + +include::config/sendemail.txt[] + +include::config/sequencer.txt[] + +include::config/showbranch.txt[] + +include::config/splitindex.txt[] + +include::config/ssh.txt[] + +include::config/status.txt[] + +include::config/stash.txt[] + +include::config/submodule.txt[] + +include::config/tag.txt[] + +include::config/transfer.txt[] + +include::config/uploadarchive.txt[] + +include::config/uploadpack.txt[] + +include::config/url.txt[] + +include::config/user.txt[] + +include::config/versionsort.txt[] + +include::config/web.txt[] + +include::config/worktree.txt[] diff --git a/Documentation/config/add.txt b/Documentation/config/add.txt new file mode 100644 index 0000000000..4d753f006e --- /dev/null +++ b/Documentation/config/add.txt @@ -0,0 +1,7 @@ +add.ignoreErrors:: +add.ignore-errors (deprecated):: + Tells 'git add' to continue adding files when some files cannot be + added due to indexing errors. Equivalent to the `--ignore-errors` + option of linkgit:git-add[1]. `add.ignore-errors` is deprecated, + as it does not follow the usual naming convention for configuration + variables. diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt new file mode 100644 index 0000000000..57fcd4c862 --- /dev/null +++ b/Documentation/config/advice.txt @@ -0,0 +1,86 @@ +advice.*:: + These variables control various optional help messages designed to + aid new users. All 'advice.*' variables default to 'true', and you + can tell Git that you do not need help by setting these to 'false': ++ +-- + pushUpdateRejected:: + Set this variable to 'false' if you want to disable + 'pushNonFFCurrent', + 'pushNonFFMatching', 'pushAlreadyExists', + 'pushFetchFirst', and 'pushNeedsForce' + simultaneously. + pushNonFFCurrent:: + Advice shown when linkgit:git-push[1] fails due to a + non-fast-forward update to the current branch. + pushNonFFMatching:: + Advice shown when you ran linkgit:git-push[1] and pushed + 'matching refs' explicitly (i.e. you used ':', or + specified a refspec that isn't your current branch) and + it resulted in a non-fast-forward error. + pushAlreadyExists:: + Shown when linkgit:git-push[1] rejects an update that + does not qualify for fast-forwarding (e.g., a tag.) + pushFetchFirst:: + Shown when linkgit:git-push[1] rejects an update that + tries to overwrite a remote ref that points at an + object we do not have. + pushNeedsForce:: + Shown when linkgit:git-push[1] rejects an update that + tries to overwrite a remote ref that points at an + object that is not a commit-ish, or make the remote + ref point at an object that is not a commit-ish. + statusHints:: + Show directions on how to proceed from the current + state in the output of linkgit:git-status[1], in + the template shown when writing commit messages in + linkgit:git-commit[1], and in the help message shown + by linkgit:git-checkout[1] when switching branch. + statusUoption:: + Advise to consider using the `-u` option to linkgit:git-status[1] + when the command takes more than 2 seconds to enumerate untracked + files. + commitBeforeMerge:: + Advice shown when linkgit:git-merge[1] refuses to + merge to avoid overwriting local changes. + resetQuiet:: + Advice to consider using the `--quiet` option to linkgit:git-reset[1] + when the command takes more than 2 seconds to enumerate unstaged + changes after reset. + resolveConflict:: + Advice shown by various commands when conflicts + prevent the operation from being performed. + implicitIdentity:: + Advice on how to set your identity configuration when + your information is guessed from the system username and + domain name. + detachedHead:: + Advice shown when you used linkgit:git-checkout[1] to + move to the detach HEAD state, to instruct how to create + a local branch after the fact. + checkoutAmbiguousRemoteBranchName:: + Advice shown when the argument to + linkgit:git-checkout[1] ambiguously resolves to a + remote tracking branch on more than one remote in + situations where an unambiguous argument would have + otherwise caused a remote-tracking branch to be + checked out. See the `checkout.defaultRemote` + configuration variable for how to set a given remote + to used by default in some situations where this + advice would be printed. + amWorkDir:: + Advice that shows the location of the patch file when + linkgit:git-am[1] fails to apply it. + rmHints:: + In case of failure in the output of linkgit:git-rm[1], + show directions on how to proceed from the current state. + addEmbeddedRepo:: + Advice on what to do when you've accidentally added one + git repo inside of another. + ignoredHook:: + Advice shown if a hook is ignored because the hook is not + set as executable. + waitingForEditor:: + Print a message to the terminal whenever Git is waiting for + editor input from the user. +-- diff --git a/Documentation/config/alias.txt b/Documentation/config/alias.txt new file mode 100644 index 0000000000..0b14178314 --- /dev/null +++ b/Documentation/config/alias.txt @@ -0,0 +1,18 @@ +alias.*:: + Command aliases for the linkgit:git[1] command wrapper - e.g. + after defining "alias.last = cat-file commit HEAD", the invocation + "git last" is equivalent to "git cat-file commit HEAD". To avoid + confusion and troubles with script usage, aliases that + hide existing Git commands are ignored. Arguments are split by + spaces, the usual shell quoting and escaping is supported. + A quote pair or a backslash can be used to quote them. ++ +If the alias expansion is prefixed with an exclamation point, +it will be treated as a shell command. For example, defining +"alias.new = !gitk --all --not ORIG_HEAD", the invocation +"git new" is equivalent to running the shell command +"gitk --all --not ORIG_HEAD". Note that shell commands will be +executed from the top-level directory of a repository, which may +not necessarily be the current directory. +`GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix' +from the original current directory. See linkgit:git-rev-parse[1]. diff --git a/Documentation/config/am.txt b/Documentation/config/am.txt new file mode 100644 index 0000000000..5bcad2efb1 --- /dev/null +++ b/Documentation/config/am.txt @@ -0,0 +1,14 @@ +am.keepcr:: + If true, git-am will call git-mailsplit for patches in mbox format + with parameter `--keep-cr`. In this case git-mailsplit will + not remove `\r` from lines ending with `\r\n`. Can be overridden + by giving `--no-keep-cr` from the command line. + See linkgit:git-am[1], linkgit:git-mailsplit[1]. + +am.threeWay:: + By default, `git am` will fail if the patch does not apply cleanly. When + set to true, this setting tells `git am` to fall back on 3-way merge if + the patch records the identity of blobs it is supposed to apply to and + we have those blobs available locally (equivalent to giving the `--3way` + option from the command line). Defaults to `false`. + See linkgit:git-am[1]. diff --git a/Documentation/config/apply.txt b/Documentation/config/apply.txt new file mode 100644 index 0000000000..8fb8ef763d --- /dev/null +++ b/Documentation/config/apply.txt @@ -0,0 +1,11 @@ +apply.ignoreWhitespace:: + When set to 'change', tells 'git apply' to ignore changes in + whitespace, in the same way as the `--ignore-space-change` + option. + When set to one of: no, none, never, false tells 'git apply' to + respect all whitespace differences. + See linkgit:git-apply[1]. + +apply.whitespace:: + Tells 'git apply' how to handle whitespaces, in the same way + as the `--whitespace` option. See linkgit:git-apply[1]. diff --git a/Documentation/config/blame.txt b/Documentation/config/blame.txt new file mode 100644 index 0000000000..67b5c1d1e0 --- /dev/null +++ b/Documentation/config/blame.txt @@ -0,0 +1,21 @@ +blame.blankBoundary:: + Show blank commit object name for boundary commits in + linkgit:git-blame[1]. This option defaults to false. + +blame.coloring:: + This determines the coloring scheme to be applied to blame + output. It can be 'repeatedLines', 'highlightRecent', + or 'none' which is the default. + +blame.date:: + Specifies the format used to output dates in linkgit:git-blame[1]. + If unset the iso format is used. For supported values, + see the discussion of the `--date` option at linkgit:git-log[1]. + +blame.showEmail:: + Show the author email instead of author name in linkgit:git-blame[1]. + This option defaults to false. + +blame.showRoot:: + Do not treat root commits as boundaries in linkgit:git-blame[1]. + This option defaults to false. diff --git a/Documentation/config/branch.txt b/Documentation/config/branch.txt new file mode 100644 index 0000000000..019d60ede2 --- /dev/null +++ b/Documentation/config/branch.txt @@ -0,0 +1,102 @@ +branch.autoSetupMerge:: + Tells 'git branch' and 'git checkout' to set up new branches + so that linkgit:git-pull[1] will appropriately merge from the + starting point branch. Note that even if this option is not set, + this behavior can be chosen per-branch using the `--track` + and `--no-track` options. The valid settings are: `false` -- no + automatic setup is done; `true` -- automatic setup is done when the + starting point is a remote-tracking branch; `always` -- + automatic setup is done when the starting point is either a + local branch or remote-tracking + branch. This option defaults to true. + +branch.autoSetupRebase:: + When a new branch is created with 'git branch' or 'git checkout' + that tracks another branch, this variable tells Git to set + up pull to rebase instead of merge (see "branch.<name>.rebase"). + When `never`, rebase is never automatically set to true. + When `local`, rebase is set to true for tracked branches of + other local branches. + When `remote`, rebase is set to true for tracked branches of + remote-tracking branches. + When `always`, rebase will be set to true for all tracking + branches. + See "branch.autoSetupMerge" for details on how to set up a + branch to track another branch. + This option defaults to never. + +branch.sort:: + This variable controls the sort ordering of branches when displayed by + linkgit:git-branch[1]. Without the "--sort=<value>" option provided, the + value of this variable will be used as the default. + See linkgit:git-for-each-ref[1] field names for valid values. + +branch.<name>.remote:: + When on branch <name>, it tells 'git fetch' and 'git push' + which remote to fetch from/push to. The remote to push to + may be overridden with `remote.pushDefault` (for all branches). + The remote to push to, for the current branch, may be further + overridden by `branch.<name>.pushRemote`. If no remote is + configured, or if you are not on any branch, it defaults to + `origin` for fetching and `remote.pushDefault` for pushing. + Additionally, `.` (a period) is the current local repository + (a dot-repository), see `branch.<name>.merge`'s final note below. + +branch.<name>.pushRemote:: + When on branch <name>, it overrides `branch.<name>.remote` for + pushing. It also overrides `remote.pushDefault` for pushing + from branch <name>. When you pull from one place (e.g. your + upstream) and push to another place (e.g. your own publishing + repository), you would want to set `remote.pushDefault` to + specify the remote to push to for all branches, and use this + option to override it for a specific branch. + +branch.<name>.merge:: + Defines, together with branch.<name>.remote, the upstream branch + for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which + branch to merge and can also affect 'git push' (see push.default). + When in branch <name>, it tells 'git fetch' the default + refspec to be marked for merging in FETCH_HEAD. The value is + handled like the remote part of a refspec, and must match a + ref which is fetched from the remote given by + "branch.<name>.remote". + The merge information is used by 'git pull' (which at first calls + 'git fetch') to lookup the default branch for merging. Without + this option, 'git pull' defaults to merge the first refspec fetched. + Specify multiple values to get an octopus merge. + If you wish to setup 'git pull' so that it merges into <name> from + another branch in the local repository, you can point + branch.<name>.merge to the desired branch, and use the relative path + setting `.` (a period) for branch.<name>.remote. + +branch.<name>.mergeOptions:: + Sets default options for merging into branch <name>. The syntax and + supported options are the same as those of linkgit:git-merge[1], but + option values containing whitespace characters are currently not + supported. + +branch.<name>.rebase:: + When true, rebase the branch <name> on top of the fetched branch, + instead of merging the default branch from the default remote when + "git pull" is run. See "pull.rebase" for doing this in a non + branch-specific manner. ++ +When `merges`, pass the `--rebase-merges` option to 'git rebase' +so that the local merge commits are included in the rebase (see +linkgit:git-rebase[1] for details). ++ +When preserve, also pass `--preserve-merges` along to 'git rebase' +so that locally committed merge commits will not be flattened +by running 'git pull'. ++ +When the value is `interactive`, the rebase is run in interactive mode. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand the implications (see linkgit:git-rebase[1] +for details). + +branch.<name>.description:: + Branch description, can be edited with + `git branch --edit-description`. Branch description is + automatically added in the format-patch cover letter or + request-pull summary. diff --git a/Documentation/config/browser.txt b/Documentation/config/browser.txt new file mode 100644 index 0000000000..195df207a6 --- /dev/null +++ b/Documentation/config/browser.txt @@ -0,0 +1,9 @@ +browser.<tool>.cmd:: + Specify the command to invoke the specified browser. The + specified command is evaluated in shell with the URLs passed + as arguments. (See linkgit:git-web{litdd}browse[1].) + +browser.<tool>.path:: + Override the path for the given tool that may be used to + browse HTML help (see `-w` option in linkgit:git-help[1]) or a + working repository in gitweb (see linkgit:git-instaweb[1]). diff --git a/Documentation/config/checkout.txt b/Documentation/config/checkout.txt new file mode 100644 index 0000000000..c4118fa196 --- /dev/null +++ b/Documentation/config/checkout.txt @@ -0,0 +1,23 @@ +checkout.defaultRemote:: + When you run 'git checkout <something>' and only have one + remote, it may implicitly fall back on checking out and + tracking e.g. 'origin/<something>'. This stops working as soon + as you have more than one remote with a '<something>' + reference. This setting allows for setting the name of a + preferred remote that should always win when it comes to + disambiguation. The typical use-case is to set this to + `origin`. ++ +Currently this is used by linkgit:git-checkout[1] when 'git checkout +<something>' will checkout the '<something>' branch on another remote, +and by linkgit:git-worktree[1] when 'git worktree add' refers to a +remote branch. This setting might be used for other checkout-like +commands or functionality in the future. + +checkout.optimizeNewBranch:: + Optimizes the performance of "git checkout -b <new_branch>" when + using sparse-checkout. When set to true, git will not update the + repo based on the current sparse-checkout settings. This means it + will not update the skip-worktree bit in the index nor add/remove + files in the working directory to reflect the current sparse checkout + settings nor will it show the local changes. diff --git a/Documentation/config/clean.txt b/Documentation/config/clean.txt new file mode 100644 index 0000000000..a807c925b9 --- /dev/null +++ b/Documentation/config/clean.txt @@ -0,0 +1,3 @@ +clean.requireForce:: + A boolean to make git-clean do nothing unless given -f, + -i or -n. Defaults to true. diff --git a/Documentation/config/color.txt b/Documentation/config/color.txt new file mode 100644 index 0000000000..8375596c44 --- /dev/null +++ b/Documentation/config/color.txt @@ -0,0 +1,201 @@ +color.advice:: + A boolean to enable/disable color in hints (e.g. when a push + failed, see `advice.*` for a list). May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors + are used only when the error output goes to a terminal. If + unset, then the value of `color.ui` is used (`auto` by default). + +color.advice.hint:: + Use customized color for hints. + +color.blame.highlightRecent:: + This can be used to color the metadata of a blame line depending + on age of the line. ++ +This setting should be set to a comma-separated list of color and date settings, +starting and ending with a color, the dates should be set from oldest to newest. +The metadata will be colored given the colors if the the line was introduced +before the given timestamp, overwriting older timestamped colors. ++ +Instead of an absolute timestamp relative timestamps work as well, e.g. +2.weeks.ago is valid to address anything older than 2 weeks. ++ +It defaults to 'blue,12 month ago,white,1 month ago,red', which colors +everything older than one year blue, recent changes between one month and +one year old are kept white, and lines introduced within the last month are +colored red. + +color.blame.repeatedLines:: + Use the customized color for the part of git-blame output that + is repeated meta information per line (such as commit id, + author name, date and timezone). Defaults to cyan. + +color.branch:: + A boolean to enable/disable color in the output of + linkgit:git-branch[1]. May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors are used + only when the output is to a terminal. If unset, then the + value of `color.ui` is used (`auto` by default). + +color.branch.<slot>:: + Use customized color for branch coloration. `<slot>` is one of + `current` (the current branch), `local` (a local branch), + `remote` (a remote-tracking branch in refs/remotes/), + `upstream` (upstream tracking branch), `plain` (other + refs). + +color.diff:: + Whether to use ANSI escape sequences to add color to patches. + If this is set to `always`, linkgit:git-diff[1], + linkgit:git-log[1], and linkgit:git-show[1] will use color + for all patches. If it is set to `true` or `auto`, those + commands will only use color when output is to the terminal. + If unset, then the value of `color.ui` is used (`auto` by + default). ++ +This does not affect linkgit:git-format-patch[1] or the +'git-diff-{asterisk}' plumbing commands. Can be overridden on the +command line with the `--color[=<when>]` option. + +color.diff.<slot>:: + Use customized color for diff colorization. `<slot>` specifies + which part of the patch to use the specified color, and is one + of `context` (context text - `plain` is a historical synonym), + `meta` (metainformation), `frag` + (hunk header), 'func' (function in hunk header), `old` (removed lines), + `new` (added lines), `commit` (commit headers), `whitespace` + (highlighting whitespace errors), `oldMoved` (deleted lines), + `newMoved` (added lines), `oldMovedDimmed`, `oldMovedAlternative`, + `oldMovedAlternativeDimmed`, `newMovedDimmed`, `newMovedAlternative` + `newMovedAlternativeDimmed` (See the '<mode>' + setting of '--color-moved' in linkgit:git-diff[1] for details), + `contextDimmed`, `oldDimmed`, `newDimmed`, `contextBold`, + `oldBold`, and `newBold` (see linkgit:git-range-diff[1] for details). + +color.decorate.<slot>:: + Use customized color for 'git log --decorate' output. `<slot>` is one + of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local + branches, remote-tracking branches, tags, stash and HEAD, respectively + and `grafted` for grafted commits. + +color.grep:: + When set to `always`, always highlight matches. When `false` (or + `never`), never. When set to `true` or `auto`, use color only + when the output is written to the terminal. If unset, then the + value of `color.ui` is used (`auto` by default). + +color.grep.<slot>:: + Use customized color for grep colorization. `<slot>` specifies which + part of the line to use the specified color, and is one of ++ +-- +`context`;; + non-matching text in context lines (when using `-A`, `-B`, or `-C`) +`filename`;; + filename prefix (when not using `-h`) +`function`;; + function name lines (when using `-p`) +`lineNumber`;; + line number prefix (when using `-n`) +`column`;; + column number prefix (when using `--column`) +`match`;; + matching text (same as setting `matchContext` and `matchSelected`) +`matchContext`;; + matching text in context lines +`matchSelected`;; + matching text in selected lines +`selected`;; + non-matching text in selected lines +`separator`;; + separators between fields on a line (`:`, `-`, and `=`) + and between hunks (`--`) +-- + +color.interactive:: + When set to `always`, always use colors for interactive prompts + and displays (such as those used by "git-add --interactive" and + "git-clean --interactive"). When false (or `never`), never. + When set to `true` or `auto`, use colors only when the output is + to the terminal. If unset, then the value of `color.ui` is + used (`auto` by default). + +color.interactive.<slot>:: + Use customized color for 'git add --interactive' and 'git clean + --interactive' output. `<slot>` may be `prompt`, `header`, `help` + or `error`, for four distinct types of normal output from + interactive commands. + +color.pager:: + A boolean to enable/disable colored output when the pager is in + use (default is true). + +color.push:: + A boolean to enable/disable color in push errors. May be set to + `always`, `false` (or `never`) or `auto` (or `true`), in which + case colors are used only when the error output goes to a terminal. + If unset, then the value of `color.ui` is used (`auto` by default). + +color.push.error:: + Use customized color for push errors. + +color.remote:: + If set, keywords at the start of the line are highlighted. The + keywords are "error", "warning", "hint" and "success", and are + matched case-insensitively. May be set to `always`, `false` (or + `never`) or `auto` (or `true`). If unset, then the value of + `color.ui` is used (`auto` by default). + +color.remote.<slot>:: + Use customized color for each remote keyword. `<slot>` may be + `hint`, `warning`, `success` or `error` which match the + corresponding keyword. + +color.showBranch:: + A boolean to enable/disable color in the output of + linkgit:git-show-branch[1]. May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors are used + only when the output is to a terminal. If unset, then the + value of `color.ui` is used (`auto` by default). + +color.status:: + A boolean to enable/disable color in the output of + linkgit:git-status[1]. May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors are used + only when the output is to a terminal. If unset, then the + value of `color.ui` is used (`auto` by default). + +color.status.<slot>:: + Use customized color for status colorization. `<slot>` is + one of `header` (the header text of the status message), + `added` or `updated` (files which are added but not committed), + `changed` (files which are changed but not added in the index), + `untracked` (files which are not tracked by Git), + `branch` (the current branch), + `nobranch` (the color the 'no branch' warning is shown in, defaulting + to red), + `localBranch` or `remoteBranch` (the local and remote branch names, + respectively, when branch and tracking information is displayed in the + status short-format), or + `unmerged` (files which have unmerged changes). + +color.transport:: + A boolean to enable/disable color when pushes are rejected. May be + set to `always`, `false` (or `never`) or `auto` (or `true`), in which + case colors are used only when the error output goes to a terminal. + If unset, then the value of `color.ui` is used (`auto` by default). + +color.transport.rejected:: + Use customized color when a push was rejected. + +color.ui:: + This variable determines the default value for variables such + as `color.diff` and `color.grep` that control the use of color + per command family. Its scope will expand as more commands learn + configuration to set a default for the `--color` option. Set it + to `false` or `never` if you prefer Git commands not to use + color unless enabled explicitly with some other configuration + or the `--color` option. Set it to `always` if you want all + output not intended for machine consumption to use color, to + `true` or `auto` (this is the default since Git 1.8.4) if you + want such output to use color when written to the terminal. diff --git a/Documentation/config/column.txt b/Documentation/config/column.txt new file mode 100644 index 0000000000..76aa2f29dc --- /dev/null +++ b/Documentation/config/column.txt @@ -0,0 +1,55 @@ +column.ui:: + Specify whether supported commands should output in columns. + This variable consists of a list of tokens separated by spaces + or commas: ++ +These options control when the feature should be enabled +(defaults to 'never'): ++ +-- +`always`;; + always show in columns +`never`;; + never show in columns +`auto`;; + show in columns if the output is to the terminal +-- ++ +These options control layout (defaults to 'column'). Setting any +of these implies 'always' if none of 'always', 'never', or 'auto' are +specified. ++ +-- +`column`;; + fill columns before rows +`row`;; + fill rows before columns +`plain`;; + show in one column +-- ++ +Finally, these options can be combined with a layout option (defaults +to 'nodense'): ++ +-- +`dense`;; + make unequal size columns to utilize more space +`nodense`;; + make equal size columns +-- + +column.branch:: + Specify whether to output branch listing in `git branch` in columns. + See `column.ui` for details. + +column.clean:: + Specify the layout when list items in `git clean -i`, which always + shows files and directories in columns. See `column.ui` for details. + +column.status:: + Specify whether to output untracked files in `git status` in columns. + See `column.ui` for details. + +column.tag:: + Specify whether to output tag listing in `git tag` in columns. + See `column.ui` for details. diff --git a/Documentation/config/commit.txt b/Documentation/config/commit.txt new file mode 100644 index 0000000000..2c95573930 --- /dev/null +++ b/Documentation/config/commit.txt @@ -0,0 +1,29 @@ +commit.cleanup:: + This setting overrides the default of the `--cleanup` option in + `git commit`. See linkgit:git-commit[1] for details. Changing the + default can be useful when you always want to keep lines that begin + with comment character `#` in your log message, in which case you + would do `git config commit.cleanup whitespace` (note that you will + have to remove the help lines that begin with `#` in the commit log + template yourself, if you do this). + +commit.gpgSign:: + + A boolean to specify whether all commits should be GPG signed. + Use of this option when doing operations such as rebase can + result in a large number of commits being signed. It may be + convenient to use an agent to avoid typing your GPG passphrase + several times. + +commit.status:: + A boolean to enable/disable inclusion of status information in the + commit message template when using an editor to prepare the commit + message. Defaults to true. + +commit.template:: + Specify the pathname of a file to use as the template for + new commit messages. + +commit.verbose:: + A boolean or int to specify the level of verbose with `git commit`. + See linkgit:git-commit[1]. diff --git a/Documentation/config/completion.txt b/Documentation/config/completion.txt new file mode 100644 index 0000000000..4d99bf33c9 --- /dev/null +++ b/Documentation/config/completion.txt @@ -0,0 +1,7 @@ +completion.commands:: + This is only used by git-completion.bash to add or remove + commands from the list of completed commands. Normally only + porcelain commands and a few select others are completed. You + can add more commands, separated by space, in this + variable. Prefixing the command with '-' will remove it from + the existing list. diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt new file mode 100644 index 0000000000..d0e6635fe0 --- /dev/null +++ b/Documentation/config/core.txt @@ -0,0 +1,600 @@ +core.fileMode:: + Tells Git if the executable bit of files in the working tree + is to be honored. ++ +Some filesystems lose the executable bit when a file that is +marked as executable is checked out, or checks out a +non-executable file with executable bit on. +linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem +to see if it handles the executable bit correctly +and this variable is automatically set as necessary. ++ +A repository, however, may be on a filesystem that handles +the filemode correctly, and this variable is set to 'true' +when created, but later may be made accessible from another +environment that loses the filemode (e.g. exporting ext4 via +CIFS mount, visiting a Cygwin created repository with +Git for Windows or Eclipse). +In such a case it may be necessary to set this variable to 'false'. +See linkgit:git-update-index[1]. ++ +The default is true (when core.filemode is not specified in the config file). + +core.hideDotFiles:: + (Windows-only) If true, mark newly-created directories and files whose + name starts with a dot as hidden. If 'dotGitOnly', only the `.git/` + directory is hidden, but no other files starting with a dot. The + default mode is 'dotGitOnly'. + +core.ignoreCase:: + Internal variable which enables various workarounds to enable + Git to work better on filesystems that are not case sensitive, + like APFS, HFS+, FAT, NTFS, etc. For example, if a directory listing + finds "makefile" when Git expects "Makefile", Git will assume + it is really the same file, and continue to remember it as + "Makefile". ++ +The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.ignoreCase true if appropriate when the repository +is created. ++ +Git relies on the proper configuration of this variable for your operating +and file system. Modifying this value may result in unexpected behavior. + +core.precomposeUnicode:: + This option is only used by Mac OS implementation of Git. + When core.precomposeUnicode=true, Git reverts the unicode decomposition + of filenames done by Mac OS. This is useful when sharing a repository + between Mac OS and Linux or Windows. + (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7). + When false, file names are handled fully transparent by Git, + which is backward compatible with older versions of Git. + +core.protectHFS:: + If set to true, do not allow checkout of paths that would + be considered equivalent to `.git` on an HFS+ filesystem. + Defaults to `true` on Mac OS, and `false` elsewhere. + +core.protectNTFS:: + If set to true, do not allow checkout of paths that would + cause problems with the NTFS filesystem, e.g. conflict with + 8.3 "short" names. + Defaults to `true` on Windows, and `false` elsewhere. + +core.fsmonitor:: + If set, the value of this variable is used as a command which + will identify all files that may have changed since the + requested date/time. This information is used to speed up git by + avoiding unnecessary processing of files that have not changed. + See the "fsmonitor-watchman" section of linkgit:githooks[5]. + +core.trustctime:: + If false, the ctime differences between the index and the + working tree are ignored; useful when the inode change time + is regularly modified by something outside Git (file system + crawlers and some backup systems). + See linkgit:git-update-index[1]. True by default. + +core.splitIndex:: + If true, the split-index feature of the index will be used. + See linkgit:git-update-index[1]. False by default. + +core.untrackedCache:: + Determines what to do about the untracked cache feature of the + index. It will be kept, if this variable is unset or set to + `keep`. It will automatically be added if set to `true`. And + it will automatically be removed, if set to `false`. Before + setting it to `true`, you should check that mtime is working + properly on your system. + See linkgit:git-update-index[1]. `keep` by default. + +core.checkStat:: + When missing or is set to `default`, many fields in the stat + structure are checked to detect if a file has been modified + since Git looked at it. When this configuration variable is + set to `minimal`, sub-second part of mtime and ctime, the + uid and gid of the owner of the file, the inode number (and + the device number, if Git was compiled to use it), are + excluded from the check among these fields, leaving only the + whole-second part of mtime (and ctime, if `core.trustCtime` + is set) and the filesize to be checked. ++ +There are implementations of Git that do not leave usable values in +some fields (e.g. JGit); by excluding these fields from the +comparison, the `minimal` mode may help interoperability when the +same repository is used by these other systems at the same time. + +core.quotePath:: + Commands that output paths (e.g. 'ls-files', 'diff'), will + quote "unusual" characters in the pathname by enclosing the + pathname in double-quotes and escaping those characters with + backslashes in the same way C escapes control characters (e.g. + `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with + values larger than 0x80 (e.g. octal `\302\265` for "micro" in + UTF-8). If this variable is set to false, bytes higher than + 0x80 are not considered "unusual" any more. Double-quotes, + backslash and control characters are always escaped regardless + of the setting of this variable. A simple space character is + not considered "unusual". Many commands can output pathnames + completely verbatim using the `-z` option. The default value + is true. + +core.eol:: + Sets the line ending type to use in the working directory for + files that have the `text` property set when core.autocrlf is false. + Alternatives are 'lf', 'crlf' and 'native', which uses the platform's + native line ending. The default value is `native`. See + linkgit:gitattributes[5] for more information on end-of-line + conversion. + +core.safecrlf:: + If true, makes Git check if converting `CRLF` is reversible when + end-of-line conversion is active. Git will verify if a command + modifies a file in the work tree either directly or indirectly. + For example, committing a file followed by checking out the + same file should yield the original file in the work tree. If + this is not the case for the current setting of + `core.autocrlf`, Git will reject the file. The variable can + be set to "warn", in which case Git will only warn about an + irreversible conversion but continue the operation. ++ +CRLF conversion bears a slight chance of corrupting data. +When it is enabled, Git will convert CRLF to LF during commit and LF to +CRLF during checkout. A file that contains a mixture of LF and +CRLF before the commit cannot be recreated by Git. For text +files this is the right thing to do: it corrects line endings +such that we have only LF line endings in the repository. +But for binary files that are accidentally classified as text the +conversion can corrupt data. ++ +If you recognize such corruption early you can easily fix it by +setting the conversion type explicitly in .gitattributes. Right +after committing you still have the original file in your work +tree and this file is not yet corrupted. You can explicitly tell +Git that this file is binary and Git will handle the file +appropriately. ++ +Unfortunately, the desired effect of cleaning up text files with +mixed line endings and the undesired effect of corrupting binary +files cannot be distinguished. In both cases CRLFs are removed +in an irreversible way. For text files this is the right thing +to do because CRLFs are line endings, while for binary files +converting CRLFs corrupts data. ++ +Note, this safety check does not mean that a checkout will generate a +file identical to the original file for a different setting of +`core.eol` and `core.autocrlf`, but only for the current one. For +example, a text file with `LF` would be accepted with `core.eol=lf` +and could later be checked out with `core.eol=crlf`, in which case the +resulting file would contain `CRLF`, although the original file +contained `LF`. However, in both work trees the line endings would be +consistent, that is either all `LF` or all `CRLF`, but never mixed. A +file with mixed line endings would be reported by the `core.safecrlf` +mechanism. + +core.autocrlf:: + Setting this variable to "true" is the same as setting + the `text` attribute to "auto" on all files and core.eol to "crlf". + Set to true if you want to have `CRLF` line endings in your + working directory and the repository has LF line endings. + This variable can be set to 'input', + in which case no output conversion is performed. + +core.checkRoundtripEncoding:: + A comma and/or whitespace separated list of encodings that Git + performs UTF-8 round trip checks on if they are used in an + `working-tree-encoding` attribute (see linkgit:gitattributes[5]). + The default value is `SHIFT-JIS`. + +core.symlinks:: + If false, symbolic links are checked out as small plain files that + contain the link text. linkgit:git-update-index[1] and + linkgit:git-add[1] will not change the recorded type to regular + file. Useful on filesystems like FAT that do not support + symbolic links. ++ +The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.symlinks false if appropriate when the repository +is created. + +core.gitProxy:: + A "proxy command" to execute (as 'command host port') instead + of establishing direct connection to the remote server when + using the Git protocol for fetching. If the variable value is + in the "COMMAND for DOMAIN" format, the command is applied only + on hostnames ending with the specified domain string. This variable + may be set multiple times and is matched in the given order; + the first match wins. ++ +Can be overridden by the `GIT_PROXY_COMMAND` environment variable +(which always applies universally, without the special "for" +handling). ++ +The special string `none` can be used as the proxy command to +specify that no proxy be used for a given domain pattern. +This is useful for excluding servers inside a firewall from +proxy use, while defaulting to a common proxy for external domains. + +core.sshCommand:: + If this variable is set, `git fetch` and `git push` will + use the specified command instead of `ssh` when they need to + connect to a remote system. The command is in the same form as + the `GIT_SSH_COMMAND` environment variable and is overridden + when the environment variable is set. + +core.ignoreStat:: + If true, Git will avoid using lstat() calls to detect if files have + changed by setting the "assume-unchanged" bit for those tracked files + which it has updated identically in both the index and working tree. ++ +When files are modified outside of Git, the user will need to stage +the modified files explicitly (e.g. see 'Examples' section in +linkgit:git-update-index[1]). +Git will not normally detect changes to those files. ++ +This is useful on systems where lstat() calls are very slow, such as +CIFS/Microsoft Windows. ++ +False by default. + +core.preferSymlinkRefs:: + Instead of the default "symref" format for HEAD + and other symbolic reference files, use symbolic links. + This is sometimes needed to work with old scripts that + expect HEAD to be a symbolic link. + +core.alternateRefsCommand:: + When advertising tips of available history from an alternate, use the shell to + execute the specified command instead of linkgit:git-for-each-ref[1]. The + first argument is the absolute path of the alternate. Output must contain one + hex object id per line (i.e., the same as produced by `git for-each-ref + --format='%(objectname)'`). ++ +Note that you cannot generally put `git for-each-ref` directly into the config +value, as it does not take a repository path as an argument (but you can wrap +the command above in a shell script). + +core.alternateRefsPrefixes:: + When listing references from an alternate, list only references that begin + with the given prefix. Prefixes match as if they were given as arguments to + linkgit:git-for-each-ref[1]. To list multiple prefixes, separate them with + whitespace. If `core.alternateRefsCommand` is set, setting + `core.alternateRefsPrefixes` has no effect. + +core.bare:: + If true this repository is assumed to be 'bare' and has no + working directory associated with it. If this is the case a + number of commands that require a working directory will be + disabled, such as linkgit:git-add[1] or linkgit:git-merge[1]. ++ +This setting is automatically guessed by linkgit:git-clone[1] or +linkgit:git-init[1] when the repository was created. By default a +repository that ends in "/.git" is assumed to be not bare (bare = +false), while all other repositories are assumed to be bare (bare += true). + +core.worktree:: + Set the path to the root of the working tree. + If `GIT_COMMON_DIR` environment variable is set, core.worktree + is ignored and not used for determining the root of working tree. + This can be overridden by the `GIT_WORK_TREE` environment + variable and the `--work-tree` command-line option. + The value can be an absolute path or relative to the path to + the .git directory, which is either specified by --git-dir + or GIT_DIR, or automatically discovered. + If --git-dir or GIT_DIR is specified but none of + --work-tree, GIT_WORK_TREE and core.worktree is specified, + the current working directory is regarded as the top level + of your working tree. ++ +Note that this variable is honored even when set in a configuration +file in a ".git" subdirectory of a directory and its value differs +from the latter directory (e.g. "/path/to/.git/config" has +core.worktree set to "/different/path"), which is most likely a +misconfiguration. Running Git commands in the "/path/to" directory will +still use "/different/path" as the root of the work tree and can cause +confusion unless you know what you are doing (e.g. you are creating a +read-only snapshot of the same index to a location different from the +repository's usual working tree). + +core.logAllRefUpdates:: + Enable the reflog. Updates to a ref <ref> is logged to the file + "`$GIT_DIR/logs/<ref>`", by appending the new and old + SHA-1, the date/time and the reason of the update, but + only when the file exists. If this configuration + variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`" + file is automatically created for branch heads (i.e. under + `refs/heads/`), remote refs (i.e. under `refs/remotes/`), + note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`. + If it is set to `always`, then a missing reflog is automatically + created for any ref under `refs/`. ++ +This information can be used to determine what commit +was the tip of a branch "2 days ago". ++ +This value is true by default in a repository that has +a working directory associated with it, and false by +default in a bare repository. + +core.repositoryFormatVersion:: + Internal variable identifying the repository format and layout + version. + +core.sharedRepository:: + When 'group' (or 'true'), the repository is made shareable between + several users in a group (making sure all the files and objects are + group-writable). When 'all' (or 'world' or 'everybody'), the + repository will be readable by all users, additionally to being + group-shareable. When 'umask' (or 'false'), Git will use permissions + reported by umask(2). When '0xxx', where '0xxx' is an octal number, + files in the repository will have this mode value. '0xxx' will override + user's umask value (whereas the other options will only override + requested parts of the user's umask value). Examples: '0660' will make + the repo read/write-able for the owner and group, but inaccessible to + others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a + repository that is group-readable but not group-writable. + See linkgit:git-init[1]. False by default. + +core.warnAmbiguousRefs:: + If true, Git will warn you if the ref name you passed it is ambiguous + and might match multiple refs in the repository. True by default. + +core.compression:: + An integer -1..9, indicating a default compression level. + -1 is the zlib default. 0 means no compression, + and 1..9 are various speed/size tradeoffs, 9 being slowest. + If set, this provides a default to other compression variables, + such as `core.looseCompression` and `pack.compression`. + +core.looseCompression:: + An integer -1..9, indicating the compression level for objects that + are not in a pack file. -1 is the zlib default. 0 means no + compression, and 1..9 are various speed/size tradeoffs, 9 being + slowest. If not set, defaults to core.compression. If that is + not set, defaults to 1 (best speed). + +core.packedGitWindowSize:: + Number of bytes of a pack file to map into memory in a + single mapping operation. Larger window sizes may allow + your system to process a smaller number of large pack files + more quickly. Smaller window sizes will negatively affect + performance due to increased calls to the operating system's + memory manager, but may improve performance when accessing + a large number of large pack files. ++ +Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32 +MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should +be reasonable for all users/operating systems. You probably do +not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.packedGitLimit:: + Maximum number of bytes to map simultaneously into memory + from pack files. If Git needs to access more than this many + bytes at once to complete an operation it will unmap existing + regions to reclaim virtual address space within the process. ++ +Default is 256 MiB on 32 bit platforms and 32 TiB (effectively +unlimited) on 64 bit platforms. +This should be reasonable for all users/operating systems, except on +the largest projects. You probably do not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.deltaBaseCacheLimit:: + Maximum number of bytes to reserve for caching base objects + that may be referenced by multiple deltified objects. By storing the + entire decompressed base objects in a cache Git is able + to avoid unpacking and decompressing frequently used base + objects multiple times. ++ +Default is 96 MiB on all platforms. This should be reasonable +for all users/operating systems, except on the largest projects. +You probably do not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.bigFileThreshold:: + Files larger than this size are stored deflated, without + attempting delta compression. Storing large files without + delta compression avoids excessive memory usage, at the + slight expense of increased disk usage. Additionally files + larger than this size are always treated as binary. ++ +Default is 512 MiB on all platforms. This should be reasonable +for most projects as source code and other text files can still +be delta compressed, but larger binary media files won't be. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.excludesFile:: + Specifies the pathname to the file that contains patterns to + describe paths that are not meant to be tracked, in addition + to '.gitignore' (per-directory) and '.git/info/exclude'. + Defaults to `$XDG_CONFIG_HOME/git/ignore`. + If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore` + is used instead. See linkgit:gitignore[5]. + +core.askPass:: + Some commands (e.g. svn and http interfaces) that interactively + ask for a password can be told to use an external program given + via the value of this variable. Can be overridden by the `GIT_ASKPASS` + environment variable. If not set, fall back to the value of the + `SSH_ASKPASS` environment variable or, failing that, a simple password + prompt. The external program shall be given a suitable prompt as + command-line argument and write the password on its STDOUT. + +core.attributesFile:: + In addition to '.gitattributes' (per-directory) and + '.git/info/attributes', Git looks into this file for attributes + (see linkgit:gitattributes[5]). Path expansions are made the same + way as for `core.excludesFile`. Its default value is + `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not + set or empty, `$HOME/.config/git/attributes` is used instead. + +core.hooksPath:: + By default Git will look for your hooks in the + '$GIT_DIR/hooks' directory. Set this to different path, + e.g. '/etc/git/hooks', and Git will try to find your hooks in + that directory, e.g. '/etc/git/hooks/pre-receive' instead of + in '$GIT_DIR/hooks/pre-receive'. ++ +The path can be either absolute or relative. A relative path is +taken as relative to the directory where the hooks are run (see +the "DESCRIPTION" section of linkgit:githooks[5]). ++ +This configuration variable is useful in cases where you'd like to +centrally configure your Git hooks instead of configuring them on a +per-repository basis, or as a more flexible and centralized +alternative to having an `init.templateDir` where you've changed +default hooks. + +core.editor:: + Commands such as `commit` and `tag` that let you edit + messages by launching an editor use the value of this + variable when it is set, and the environment variable + `GIT_EDITOR` is not set. See linkgit:git-var[1]. + +core.commentChar:: + Commands such as `commit` and `tag` that let you edit + messages consider a line that begins with this character + commented, and removes them after the editor returns + (default '#'). ++ +If set to "auto", `git-commit` would select a character that is not +the beginning character of any line in existing commit messages. + +core.filesRefLockTimeout:: + The length of time, in milliseconds, to retry when trying to + lock an individual reference. Value 0 means not to retry at + all; -1 means to try indefinitely. Default is 100 (i.e., + retry for 100ms). + +core.packedRefsTimeout:: + The length of time, in milliseconds, to retry when trying to + lock the `packed-refs` file. Value 0 means not to retry at + all; -1 means to try indefinitely. Default is 1000 (i.e., + retry for 1 second). + +core.pager:: + Text viewer for use by Git commands (e.g., 'less'). The value + is meant to be interpreted by the shell. The order of preference + is the `$GIT_PAGER` environment variable, then `core.pager` + configuration, then `$PAGER`, and then the default chosen at + compile time (usually 'less'). ++ +When the `LESS` environment variable is unset, Git sets it to `FRX` +(if `LESS` environment variable is set, Git does not change it at +all). If you want to selectively override Git's default setting +for `LESS`, you can set `core.pager` to e.g. `less -S`. This will +be passed to the shell by Git, which will translate the final +command to `LESS=FRX less -S`. The environment does not set the +`S` option but the command line does, instructing less to truncate +long lines. Similarly, setting `core.pager` to `less -+F` will +deactivate the `F` option specified by the environment from the +command-line, deactivating the "quit if one screen" behavior of +`less`. One can specifically activate some flags for particular +commands: for example, setting `pager.blame` to `less -S` enables +line truncation only for `git blame`. ++ +Likewise, when the `LV` environment variable is unset, Git sets it +to `-c`. You can override this setting by exporting `LV` with +another value or setting `core.pager` to `lv +c`. + +core.whitespace:: + A comma separated list of common whitespace problems to + notice. 'git diff' will use `color.diff.whitespace` to + highlight them, and 'git apply --whitespace=error' will + consider them as errors. You can prefix `-` to disable + any of them (e.g. `-trailing-space`): ++ +* `blank-at-eol` treats trailing whitespaces at the end of the line + as an error (enabled by default). +* `space-before-tab` treats a space character that appears immediately + before a tab character in the initial indent part of the line as an + error (enabled by default). +* `indent-with-non-tab` treats a line that is indented with space + characters instead of the equivalent tabs as an error (not enabled by + default). +* `tab-in-indent` treats a tab character in the initial indent part of + the line as an error (not enabled by default). +* `blank-at-eof` treats blank lines added at the end of file as an error + (enabled by default). +* `trailing-space` is a short-hand to cover both `blank-at-eol` and + `blank-at-eof`. +* `cr-at-eol` treats a carriage-return at the end of line as + part of the line terminator, i.e. with it, `trailing-space` + does not trigger if the character before such a carriage-return + is not a whitespace (not enabled by default). +* `tabwidth=<n>` tells how many character positions a tab occupies; this + is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent` + errors. The default tab width is 8. Allowed values are 1 to 63. + +core.fsyncObjectFiles:: + This boolean will enable 'fsync()' when writing object files. ++ +This is a total waste of time and effort on a filesystem that orders +data writes properly, but can be useful for filesystems that do not use +journalling (traditional UNIX filesystems) or that only journal metadata +and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback"). + +core.preloadIndex:: + Enable parallel index preload for operations like 'git diff' ++ +This can speed up operations like 'git diff' and 'git status' especially +on filesystems like NFS that have weak caching semantics and thus +relatively high IO latencies. When enabled, Git will do the +index comparison to the filesystem data in parallel, allowing +overlapping IO's. Defaults to true. + +core.unsetenvvars:: + Windows-only: comma-separated list of environment variables' + names that need to be unset before spawning any other process. + Defaults to `PERL5LIB` to account for the fact that Git for + Windows insists on using its own Perl interpreter. + +core.createObject:: + You can set this to 'link', in which case a hardlink followed by + a delete of the source are used to make sure that object creation + will not overwrite existing objects. ++ +On some file system/operating system combinations, this is unreliable. +Set this config setting to 'rename' there; However, This will remove the +check that makes sure that existing object files will not get overwritten. + +core.notesRef:: + When showing commit messages, also show notes which are stored in + the given ref. The ref must be fully qualified. If the given + ref does not exist, it is not an error but means that no + notes should be printed. ++ +This setting defaults to "refs/notes/commits", and it can be overridden by +the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1]. + +core.commitGraph:: + If true, then git will read the commit-graph file (if it exists) + to parse the graph structure of commits. Defaults to false. See + linkgit:git-commit-graph[1] for more information. + +core.useReplaceRefs:: + If set to `false`, behave as if the `--no-replace-objects` + option was given on the command line. See linkgit:git[1] and + linkgit:git-replace[1] for more information. + +core.multiPackIndex:: + Use the multi-pack-index file to track multiple packfiles using a + single index. See link:technical/multi-pack-index.html[the + multi-pack-index design document]. + +core.sparseCheckout:: + Enable "sparse checkout" feature. See section "Sparse checkout" in + linkgit:git-read-tree[1] for more information. + +core.abbrev:: + Set the length object names are abbreviated to. If + unspecified or set to "auto", an appropriate value is + computed based on the approximate number of packed objects + in your repository, which hopefully is enough for + abbreviated object names to stay unique for some time. + The minimum length is 4. diff --git a/Documentation/config/credential.txt b/Documentation/config/credential.txt new file mode 100644 index 0000000000..60fb3189e1 --- /dev/null +++ b/Documentation/config/credential.txt @@ -0,0 +1,26 @@ +credential.helper:: + Specify an external helper to be called when a username or + password credential is needed; the helper may consult external + storage to avoid prompting the user for the credentials. Note + that multiple helpers may be defined. See linkgit:gitcredentials[7] + for details. + +credential.useHttpPath:: + When acquiring credentials, consider the "path" component of an http + or https URL to be important. Defaults to false. See + linkgit:gitcredentials[7] for more information. + +credential.username:: + If no username is set for a network authentication, use this username + by default. See credential.<context>.* below, and + linkgit:gitcredentials[7]. + +credential.<url>.*:: + Any of the credential.* options above can be applied selectively to + some credentials. For example "credential.https://example.com.username" + would set the default username only for https connections to + example.com. See linkgit:gitcredentials[7] for details on how URLs are + matched. + +credentialCache.ignoreSIGHUP:: + Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting. diff --git a/Documentation/diff-config.txt b/Documentation/config/diff.txt index e64d983c34..e48bb987d7 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/config/diff.txt @@ -185,7 +185,7 @@ diff.guitool:: and requires that a corresponding difftool.<guitool>.cmd variable is defined. -include::mergetools-diff.txt[] +include::../mergetools-diff.txt[] diff.indentHeuristic:: Set this option to `true` to enable experimental heuristics diff --git a/Documentation/config/difftool.txt b/Documentation/config/difftool.txt new file mode 100644 index 0000000000..6762594480 --- /dev/null +++ b/Documentation/config/difftool.txt @@ -0,0 +1,14 @@ +difftool.<tool>.path:: + Override the path for the given tool. This is useful in case + your tool is not in the PATH. + +difftool.<tool>.cmd:: + Specify the command to invoke the specified diff tool. + The specified command is evaluated in shell with the following + variables available: 'LOCAL' is set to the name of the temporary + file containing the contents of the diff pre-image and 'REMOTE' + is set to the name of the temporary file containing the contents + of the diff post-image. + +difftool.prompt:: + Prompt before each invocation of the diff tool. diff --git a/Documentation/config/fastimport.txt b/Documentation/config/fastimport.txt new file mode 100644 index 0000000000..c1166e330d --- /dev/null +++ b/Documentation/config/fastimport.txt @@ -0,0 +1,8 @@ +fastimport.unpackLimit:: + If the number of objects imported by linkgit:git-fast-import[1] + is below this limit, then the objects will be unpacked into + loose object files. However if the number of imported objects + equals or exceeds this limit then the pack will be stored as a + pack. Storing the pack from a fast-import can make the import + operation complete faster, especially on slow filesystems. If + not set, the value of `transfer.unpackLimit` is used instead. diff --git a/Documentation/fetch-config.txt b/Documentation/config/fetch.txt index cbfad6cdbb..cbfad6cdbb 100644 --- a/Documentation/fetch-config.txt +++ b/Documentation/config/fetch.txt diff --git a/Documentation/config/filter.txt b/Documentation/config/filter.txt new file mode 100644 index 0000000000..90dfe0ba5a --- /dev/null +++ b/Documentation/config/filter.txt @@ -0,0 +1,9 @@ +filter.<driver>.clean:: + The command which is used to convert the content of a worktree + file to a blob upon checkin. See linkgit:gitattributes[5] for + details. + +filter.<driver>.smudge:: + The command which is used to convert the content of a blob + object to a worktree file upon checkout. See + linkgit:gitattributes[5] for details. diff --git a/Documentation/fmt-merge-msg-config.txt b/Documentation/config/fmt-merge-msg.txt index c73cfa90b7..c73cfa90b7 100644 --- a/Documentation/fmt-merge-msg-config.txt +++ b/Documentation/config/fmt-merge-msg.txt diff --git a/Documentation/format-config.txt b/Documentation/config/format.txt index dc77941c48..dc77941c48 100644 --- a/Documentation/format-config.txt +++ b/Documentation/config/format.txt diff --git a/Documentation/config/fsck.txt b/Documentation/config/fsck.txt new file mode 100644 index 0000000000..879c5a29c4 --- /dev/null +++ b/Documentation/config/fsck.txt @@ -0,0 +1,67 @@ +fsck.<msg-id>:: + During fsck git may find issues with legacy data which + wouldn't be generated by current versions of git, and which + wouldn't be sent over the wire if `transfer.fsckObjects` was + set. This feature is intended to support working with legacy + repositories containing such data. ++ +Setting `fsck.<msg-id>` will be picked up by linkgit:git-fsck[1], but +to accept pushes of such data set `receive.fsck.<msg-id>` instead, or +to clone or fetch it set `fetch.fsck.<msg-id>`. ++ +The rest of the documentation discusses `fsck.*` for brevity, but the +same applies for the corresponding `receive.fsck.*` and +`fetch.<msg-id>.*`. variables. ++ +Unlike variables like `color.ui` and `core.editor` the +`receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>` variables will not +fall back on the `fsck.<msg-id>` configuration if they aren't set. To +uniformly configure the same fsck settings in different circumstances +all three of them they must all set to the same values. ++ +When `fsck.<msg-id>` is set, errors can be switched to warnings and +vice versa by configuring the `fsck.<msg-id>` setting where the +`<msg-id>` is the fsck message ID and the value is one of `error`, +`warn` or `ignore`. For convenience, fsck prefixes the error/warning +with the message ID, e.g. "missingEmail: invalid author/committer line +- missing email" means that setting `fsck.missingEmail = ignore` will +hide that issue. ++ +In general, it is better to enumerate existing objects with problems +with `fsck.skipList`, instead of listing the kind of breakages these +problematic objects share to be ignored, as doing the latter will +allow new instances of the same breakages go unnoticed. ++ +Setting an unknown `fsck.<msg-id>` value will cause fsck to die, but +doing the same for `receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>` +will only cause git to warn. + +fsck.skipList:: + The path to a list of object names (i.e. one unabbreviated SHA-1 per + line) that are known to be broken in a non-fatal way and should + be ignored. On versions of Git 2.20 and later comments ('#'), empty + lines, and any leading and trailing whitespace is ignored. Everything + but a SHA-1 per line will error out on older versions. ++ +This feature is useful when an established project should be accepted +despite early commits containing errors that can be safely ignored +such as invalid committer email addresses. Note: corrupt objects +cannot be skipped with this setting. ++ +Like `fsck.<msg-id>` this variable has corresponding +`receive.fsck.skipList` and `fetch.fsck.skipList` variants. ++ +Unlike variables like `color.ui` and `core.editor` the +`receive.fsck.skipList` and `fetch.fsck.skipList` variables will not +fall back on the `fsck.skipList` configuration if they aren't set. To +uniformly configure the same fsck settings in different circumstances +all three of them they must all set to the same values. ++ +Older versions of Git (before 2.20) documented that the object names +list should be sorted. This was never a requirement, the object names +could appear in any order, but when reading the list we tracked whether +the list was sorted for the purposes of an internal binary search +implementation, which could save itself some work with an already sorted +list. Unless you had a humongous list there was no reason to go out of +your way to pre-sort the list. After Git version 2.20 a hash implementation +is used instead, so there's now no reason to pre-sort the list. diff --git a/Documentation/config/gc.txt b/Documentation/config/gc.txt new file mode 100644 index 0000000000..c6fbb8a96f --- /dev/null +++ b/Documentation/config/gc.txt @@ -0,0 +1,108 @@ +gc.aggressiveDepth:: + The depth parameter used in the delta compression + algorithm used by 'git gc --aggressive'. This defaults + to 50. + +gc.aggressiveWindow:: + The window size parameter used in the delta compression + algorithm used by 'git gc --aggressive'. This defaults + to 250. + +gc.auto:: + When there are approximately more than this many loose + objects in the repository, `git gc --auto` will pack them. + Some Porcelain commands use this command to perform a + light-weight garbage collection from time to time. The + default value is 6700. Setting this to 0 disables it. + +gc.autoPackLimit:: + When there are more than this many packs that are not + marked with `*.keep` file in the repository, `git gc + --auto` consolidates them into one larger pack. The + default value is 50. Setting this to 0 disables it. + +gc.autoDetach:: + Make `git gc --auto` return immediately and run in background + if the system supports it. Default is true. + +gc.bigPackThreshold:: + If non-zero, all packs larger than this limit are kept when + `git gc` is run. This is very similar to `--keep-base-pack` + except that all packs that meet the threshold are kept, not + just the base pack. Defaults to zero. Common unit suffixes of + 'k', 'm', or 'g' are supported. ++ +Note that if the number of kept packs is more than gc.autoPackLimit, +this configuration variable is ignored, all packs except the base pack +will be repacked. After this the number of packs should go below +gc.autoPackLimit and gc.bigPackThreshold should be respected again. + +gc.writeCommitGraph:: + If true, then gc will rewrite the commit-graph file when + linkgit:git-gc[1] is run. When using linkgit:git-gc[1] + '--auto' the commit-graph will be updated if housekeeping is + required. Default is false. See linkgit:git-commit-graph[1] + for details. + +gc.logExpiry:: + If the file gc.log exists, then `git gc --auto` will print + its content and exit with status zero instead of running + unless that file is more than 'gc.logExpiry' old. Default is + "1.day". See `gc.pruneExpire` for more ways to specify its + value. + +gc.packRefs:: + Running `git pack-refs` in a repository renders it + unclonable by Git versions prior to 1.5.1.2 over dumb + transports such as HTTP. This variable determines whether + 'git gc' runs `git pack-refs`. This can be set to `notbare` + to enable it within all non-bare repos or it can be set to a + boolean value. The default is `true`. + +gc.pruneExpire:: + When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'. + Override the grace period with this config variable. The value + "now" may be used to disable this grace period and always prune + unreachable objects immediately, or "never" may be used to + suppress pruning. This feature helps prevent corruption when + 'git gc' runs concurrently with another process writing to the + repository; see the "NOTES" section of linkgit:git-gc[1]. + +gc.worktreePruneExpire:: + When 'git gc' is run, it calls + 'git worktree prune --expire 3.months.ago'. + This config variable can be used to set a different grace + period. The value "now" may be used to disable the grace + period and prune `$GIT_DIR/worktrees` immediately, or "never" + may be used to suppress pruning. + +gc.reflogExpire:: +gc.<pattern>.reflogExpire:: + 'git reflog expire' removes reflog entries older than + this time; defaults to 90 days. The value "now" expires all + entries immediately, and "never" suppresses expiration + altogether. With "<pattern>" (e.g. + "refs/stash") in the middle the setting applies only to + the refs that match the <pattern>. + +gc.reflogExpireUnreachable:: +gc.<pattern>.reflogExpireUnreachable:: + 'git reflog expire' removes reflog entries older than + this time and are not reachable from the current tip; + defaults to 30 days. The value "now" expires all entries + immediately, and "never" suppresses expiration altogether. + With "<pattern>" (e.g. "refs/stash") + in the middle, the setting applies only to the refs that + match the <pattern>. + +gc.rerereResolved:: + Records of conflicted merge you resolved earlier are + kept for this many days when 'git rerere gc' is run. + You can also use more human-readable "1.month.ago", etc. + The default is 60 days. See linkgit:git-rerere[1]. + +gc.rerereUnresolved:: + Records of conflicted merge you have not resolved are + kept for this many days when 'git rerere gc' is run. + You can also use more human-readable "1.month.ago", etc. + The default is 15 days. See linkgit:git-rerere[1]. diff --git a/Documentation/gitcvs-config.txt b/Documentation/config/gitcvs.txt index 02da427fd9..02da427fd9 100644 --- a/Documentation/gitcvs-config.txt +++ b/Documentation/config/gitcvs.txt diff --git a/Documentation/config/gitweb.txt b/Documentation/config/gitweb.txt new file mode 100644 index 0000000000..1b51475108 --- /dev/null +++ b/Documentation/config/gitweb.txt @@ -0,0 +1,16 @@ +gitweb.category:: +gitweb.description:: +gitweb.owner:: +gitweb.url:: + See linkgit:gitweb[1] for description. + +gitweb.avatar:: +gitweb.blame:: +gitweb.grep:: +gitweb.highlight:: +gitweb.patches:: +gitweb.pickaxe:: +gitweb.remote_heads:: +gitweb.showSizes:: +gitweb.snapshot:: + See linkgit:gitweb.conf[5] for description. diff --git a/Documentation/config/gpg.txt b/Documentation/config/gpg.txt new file mode 100644 index 0000000000..590fe0d4ba --- /dev/null +++ b/Documentation/config/gpg.txt @@ -0,0 +1,20 @@ +gpg.program:: + Use this custom program instead of "`gpg`" found on `$PATH` when + making or verifying a PGP signature. The program must support the + same command-line interface as GPG, namely, to verify a detached + signature, "`gpg --verify $file - <$signature`" is run, and the + program is expected to signal a good signature by exiting with + code 0, and to generate an ASCII-armored detached signature, the + standard input of "`gpg -bsau $key`" is fed with the contents to be + signed, and the program is expected to send the result to its + standard output. + +gpg.format:: + Specifies which key format to use when signing with `--gpg-sign`. + Default is "openpgp" and another possible value is "x509". + +gpg.<format>.program:: + Use this to customize the program used for the signing format you + chose. (see `gpg.program` and `gpg.format`) `gpg.program` can still + be used as a legacy synonym for `gpg.openpgp.program`. The default + value for `gpg.x509.program` is "gpgsm". diff --git a/Documentation/config/grep.txt b/Documentation/config/grep.txt new file mode 100644 index 0000000000..44abe45a7c --- /dev/null +++ b/Documentation/config/grep.txt @@ -0,0 +1,24 @@ +grep.lineNumber:: + If set to true, enable `-n` option by default. + +grep.column:: + If set to true, enable the `--column` option by default. + +grep.patternType:: + Set the default matching behavior. Using a value of 'basic', 'extended', + 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`, + `--fixed-strings`, or `--perl-regexp` option accordingly, while the + value 'default' will return to the default matching behavior. + +grep.extendedRegexp:: + If set to true, enable `--extended-regexp` option by default. This + option is ignored when the `grep.patternType` option is set to a value + other than 'default'. + +grep.threads:: + Number of grep worker threads to use. + See `grep.threads` in linkgit:git-grep[1] for more information. + +grep.fallbackToNoIndex:: + If set to true, fall back to git grep --no-index if git grep + is executed outside of a git repository. Defaults to false. diff --git a/Documentation/gui-config.txt b/Documentation/config/gui.txt index d30831a130..d30831a130 100644 --- a/Documentation/gui-config.txt +++ b/Documentation/config/gui.txt diff --git a/Documentation/config/guitool.txt b/Documentation/config/guitool.txt new file mode 100644 index 0000000000..43fb9466ff --- /dev/null +++ b/Documentation/config/guitool.txt @@ -0,0 +1,50 @@ +guitool.<name>.cmd:: + Specifies the shell command line to execute when the corresponding item + of the linkgit:git-gui[1] `Tools` menu is invoked. This option is + mandatory for every tool. The command is executed from the root of + the working directory, and in the environment it receives the name of + the tool as `GIT_GUITOOL`, the name of the currently selected file as + 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if + the head is detached, 'CUR_BRANCH' is empty). + +guitool.<name>.needsFile:: + Run the tool only if a diff is selected in the GUI. It guarantees + that 'FILENAME' is not empty. + +guitool.<name>.noConsole:: + Run the command silently, without creating a window to display its + output. + +guitool.<name>.noRescan:: + Don't rescan the working directory for changes after the tool + finishes execution. + +guitool.<name>.confirm:: + Show a confirmation dialog before actually running the tool. + +guitool.<name>.argPrompt:: + Request a string argument from the user, and pass it to the tool + through the `ARGS` environment variable. Since requesting an + argument implies confirmation, the 'confirm' option has no effect + if this is enabled. If the option is set to 'true', 'yes', or '1', + the dialog uses a built-in generic prompt; otherwise the exact + value of the variable is used. + +guitool.<name>.revPrompt:: + Request a single valid revision from the user, and set the + `REVISION` environment variable. In other aspects this option + is similar to 'argPrompt', and can be used together with it. + +guitool.<name>.revUnmerged:: + Show only unmerged branches in the 'revPrompt' subdialog. + This is useful for tools similar to merge or rebase, but not + for things like checkout or reset. + +guitool.<name>.title:: + Specifies the title to use for the prompt dialog. The default + is the tool name. + +guitool.<name>.prompt:: + Specifies the general prompt string to display at the top of + the dialog, before subsections for 'argPrompt' and 'revPrompt'. + The default value includes the actual command. diff --git a/Documentation/config/help.txt b/Documentation/config/help.txt new file mode 100644 index 0000000000..224bbf5a28 --- /dev/null +++ b/Documentation/config/help.txt @@ -0,0 +1,23 @@ +help.browser:: + Specify the browser that will be used to display help in the + 'web' format. See linkgit:git-help[1]. + +help.format:: + Override the default help format used by linkgit:git-help[1]. + Values 'man', 'info', 'web' and 'html' are supported. 'man' is + the default. 'web' and 'html' are the same. + +help.autoCorrect:: + Automatically correct and execute mistyped commands after + waiting for the given number of deciseconds (0.1 sec). If more + than one command can be deduced from the entered text, nothing + will be executed. If the value of this option is negative, + the corrected command will be executed immediately. If the + value is 0 - the command will be just shown but not executed. + This is the default. + +help.htmlPath:: + Specify the path where the HTML documentation resides. File system paths + and URLs are supported. HTML pages will be prefixed with this path when + help is displayed in the 'web' format. This defaults to the documentation + path of your Git installation. diff --git a/Documentation/config/http.txt b/Documentation/config/http.txt new file mode 100644 index 0000000000..a56d848bc0 --- /dev/null +++ b/Documentation/config/http.txt @@ -0,0 +1,271 @@ +http.proxy:: + Override the HTTP proxy, normally configured using the 'http_proxy', + 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In + addition to the syntax understood by curl, it is possible to specify a + proxy string with a user name but no password, in which case git will + attempt to acquire one in the same way it does for other credentials. See + linkgit:gitcredentials[7] for more information. The syntax thus is + '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden + on a per-remote basis; see remote.<name>.proxy + +http.proxyAuthMethod:: + Set the method with which to authenticate against the HTTP proxy. This + only takes effect if the configured proxy string contains a user name part + (i.e. is of the form 'user@host' or 'user@host:port'). This can be + overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`. + Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment + variable. Possible values are: ++ +-- +* `anyauth` - Automatically pick a suitable authentication method. It is + assumed that the proxy answers an unauthenticated request with a 407 + status code and one or more Proxy-authenticate headers with supported + authentication methods. This is the default. +* `basic` - HTTP Basic authentication +* `digest` - HTTP Digest authentication; this prevents the password from being + transmitted to the proxy in clear text +* `negotiate` - GSS-Negotiate authentication (compare the --negotiate option + of `curl(1)`) +* `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`) +-- + +http.emptyAuth:: + Attempt authentication without seeking a username or password. This + can be used to attempt GSS-Negotiate authentication without specifying + a username in the URL, as libcurl normally requires a username for + authentication. + +http.delegation:: + Control GSSAPI credential delegation. The delegation is disabled + by default in libcurl since version 7.21.7. Set parameter to tell + the server what it is allowed to delegate when it comes to user + credentials. Used with GSS/kerberos. Possible values are: ++ +-- +* `none` - Don't allow any delegation. +* `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the + Kerberos service ticket, which is a matter of realm policy. +* `always` - Unconditionally allow the server to delegate. +-- + + +http.extraHeader:: + Pass an additional HTTP header when communicating with a server. If + more than one such entry exists, all of them are added as extra + headers. To allow overriding the settings inherited from the system + config, an empty value will reset the extra headers to the empty list. + +http.cookieFile:: + The pathname of a file containing previously stored cookie lines, + which should be used + in the Git http session, if they match the server. The file format + of the file to read cookies from should be plain HTTP headers or + the Netscape/Mozilla cookie file format (see `curl(1)`). + NOTE that the file specified with http.cookieFile is used only as + input unless http.saveCookies is set. + +http.saveCookies:: + If set, store cookies received during requests to the file specified by + http.cookieFile. Has no effect if http.cookieFile is unset. + +http.sslVersion:: + The SSL version to use when negotiating an SSL connection, if you + want to force the default. The available and default version + depend on whether libcurl was built against NSS or OpenSSL and the + particular configuration of the crypto library in use. Internally + this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl + documentation for more details on the format of this option and + for the ssl version supported. Actually the possible values of + this option are: + + - sslv2 + - sslv3 + - tlsv1 + - tlsv1.0 + - tlsv1.1 + - tlsv1.2 + - tlsv1.3 + ++ +Can be overridden by the `GIT_SSL_VERSION` environment variable. +To force git to use libcurl's default ssl version and ignore any +explicit http.sslversion option, set `GIT_SSL_VERSION` to the +empty string. + +http.sslCipherList:: + A list of SSL ciphers to use when negotiating an SSL connection. + The available ciphers depend on whether libcurl was built against + NSS or OpenSSL and the particular configuration of the crypto + library in use. Internally this sets the 'CURLOPT_SSL_CIPHER_LIST' + option; see the libcurl documentation for more details on the format + of this list. ++ +Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable. +To force git to use libcurl's default cipher list and ignore any +explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the +empty string. + +http.sslVerify:: + Whether to verify the SSL certificate when fetching or pushing + over HTTPS. Defaults to true. Can be overridden by the + `GIT_SSL_NO_VERIFY` environment variable. + +http.sslCert:: + File containing the SSL certificate when fetching or pushing + over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment + variable. + +http.sslKey:: + File containing the SSL private key when fetching or pushing + over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment + variable. + +http.sslCertPasswordProtected:: + Enable Git's password prompt for the SSL certificate. Otherwise + OpenSSL will prompt the user, possibly many times, if the + certificate or private key is encrypted. Can be overridden by the + `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable. + +http.sslCAInfo:: + File containing the certificates to verify the peer with when + fetching or pushing over HTTPS. Can be overridden by the + `GIT_SSL_CAINFO` environment variable. + +http.sslCAPath:: + Path containing files with the CA certificates to verify the peer + with when fetching or pushing over HTTPS. Can be overridden + by the `GIT_SSL_CAPATH` environment variable. + +http.sslBackend:: + Name of the SSL backend to use (e.g. "openssl" or "schannel"). + This option is ignored if cURL lacks support for choosing the SSL + backend at runtime. + +http.schannelCheckRevoke:: + Used to enforce or disable certificate revocation checks in cURL + when http.sslBackend is set to "schannel". Defaults to `true` if + unset. Only necessary to disable this if Git consistently errors + and the message is about checking the revocation status of a + certificate. This option is ignored if cURL lacks support for + setting the relevant SSL option at runtime. + +http.schannelUseSSLCAInfo:: + As of cURL v7.60.0, the Secure Channel backend can use the + certificate bundle provided via `http.sslCAInfo`, but that would + override the Windows Certificate Store. Since this is not desirable + by default, Git will tell cURL not to use that bundle by default + when the `schannel` backend was configured via `http.sslBackend`, + unless `http.schannelUseSSLCAInfo` overrides this behavior. + +http.pinnedpubkey:: + Public key of the https service. It may either be the filename of + a PEM or DER encoded public key file or a string starting with + 'sha256//' followed by the base64 encoded sha256 hash of the + public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will + exit with an error if this option is set but not supported by + cURL. + +http.sslTry:: + Attempt to use AUTH SSL/TLS and encrypted data transfers + when connecting via regular FTP protocol. This might be needed + if the FTP server requires it for security reasons or you wish + to connect securely whenever remote FTP server supports it. + Default is false since it might trigger certificate verification + errors on misconfigured servers. + +http.maxRequests:: + How many HTTP requests to launch in parallel. Can be overridden + by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5. + +http.minSessions:: + The number of curl sessions (counted across slots) to be kept across + requests. They will not be ended with curl_easy_cleanup() until + http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this + value will be capped at 1. Defaults to 1. + +http.postBuffer:: + Maximum size in bytes of the buffer used by smart HTTP + transports when POSTing data to the remote system. + For requests larger than this buffer size, HTTP/1.1 and + Transfer-Encoding: chunked is used to avoid creating a + massive pack file locally. Default is 1 MiB, which is + sufficient for most requests. + +http.lowSpeedLimit, http.lowSpeedTime:: + If the HTTP transfer speed is less than 'http.lowSpeedLimit' + for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. + Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and + `GIT_HTTP_LOW_SPEED_TIME` environment variables. + +http.noEPSV:: + A boolean which disables using of EPSV ftp command by curl. + This can helpful with some "poor" ftp servers which don't + support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV` + environment variable. Default is false (curl will use EPSV). + +http.userAgent:: + The HTTP USER_AGENT string presented to an HTTP server. The default + value represents the version of the client Git such as git/1.7.1. + This option allows you to override this value to a more common value + such as Mozilla/4.0. This may be necessary, for instance, if + connecting through a firewall that restricts HTTP connections to a set + of common USER_AGENT strings (but not including those like git/1.7.1). + Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable. + +http.followRedirects:: + Whether git should follow HTTP redirects. If set to `true`, git + will transparently follow any redirect issued by a server it + encounters. If set to `false`, git will treat all redirects as + errors. If set to `initial`, git will follow redirects only for + the initial request to a remote, but not for subsequent + follow-up HTTP requests. Since git uses the redirected URL as + the base for the follow-up requests, this is generally + sufficient. The default is `initial`. + +http.<url>.*:: + Any of the http.* options above can be applied selectively to some URLs. + For a config key to match a URL, each element of the config key is + compared to that of the URL, in the following order: ++ +-- +. Scheme (e.g., `https` in `https://example.com/`). This field + must match exactly between the config key and the URL. + +. Host/domain name (e.g., `example.com` in `https://example.com/`). + This field must match between the config key and the URL. It is + possible to specify a `*` as part of the host name to match all subdomains + at this level. `https://*.example.com/` for example would match + `https://foo.example.com/`, but not `https://foo.bar.example.com/`. + +. Port number (e.g., `8080` in `http://example.com:8080/`). + This field must match exactly between the config key and the URL. + Omitted port numbers are automatically converted to the correct + default for the scheme before matching. + +. Path (e.g., `repo.git` in `https://example.com/repo.git`). The + path field of the config key must match the path field of the URL + either exactly or as a prefix of slash-delimited path elements. This means + a config key with path `foo/` matches URL path `foo/bar`. A prefix can only + match on a slash (`/`) boundary. Longer matches take precedence (so a config + key with path `foo/bar` is a better match to URL path `foo/bar` than a config + key with just path `foo/`). + +. User name (e.g., `user` in `https://user@example.com/repo.git`). If + the config key has a user name it must match the user name in the + URL exactly. If the config key does not have a user name, that + config key will match a URL with any user name (including none), + but at a lower precedence than a config key with a user name. +-- ++ +The list above is ordered by decreasing precedence; a URL that matches +a config key's path is preferred to one that matches its user name. For example, +if the URL is `https://user@example.com/foo/bar` a config key match of +`https://example.com/foo` will be preferred over a config key match of +`https://user@example.com`. ++ +All URLs are normalized before attempting any matching (the password part, +if embedded in the URL, is always ignored for matching purposes) so that +equivalent URLs that are simply spelled differently will match properly. +Environment variable settings always override any matches. The URLs that are +matched against are those given directly to Git commands. This means any URLs +visited as a result of a redirection do not participate in matching. diff --git a/Documentation/config/i18n.txt b/Documentation/config/i18n.txt new file mode 100644 index 0000000000..cc25621731 --- /dev/null +++ b/Documentation/config/i18n.txt @@ -0,0 +1,10 @@ +i18n.commitEncoding:: + Character encoding the commit messages are stored in; Git itself + does not care per se, but this information is necessary e.g. when + importing commits from emails or in the gitk graphical history + browser (and possibly at other places in the future or in other + porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'. + +i18n.logOutputEncoding:: + Character encoding the commit messages are converted to when + running 'git log' and friends. diff --git a/Documentation/config/imap.txt b/Documentation/config/imap.txt new file mode 100644 index 0000000000..06166fb5c0 --- /dev/null +++ b/Documentation/config/imap.txt @@ -0,0 +1,44 @@ +imap.folder:: + The folder to drop the mails into, which is typically the Drafts + folder. For example: "INBOX.Drafts", "INBOX/Drafts" or + "[Gmail]/Drafts". Required. + +imap.tunnel:: + Command used to setup a tunnel to the IMAP server through which + commands will be piped instead of using a direct network connection + to the server. Required when imap.host is not set. + +imap.host:: + A URL identifying the server. Use an `imap://` prefix for non-secure + connections and an `imaps://` prefix for secure connections. + Ignored when imap.tunnel is set, but required otherwise. + +imap.user:: + The username to use when logging in to the server. + +imap.pass:: + The password to use when logging in to the server. + +imap.port:: + An integer port number to connect to on the server. + Defaults to 143 for imap:// hosts and 993 for imaps:// hosts. + Ignored when imap.tunnel is set. + +imap.sslverify:: + A boolean to enable/disable verification of the server certificate + used by the SSL/TLS connection. Default is `true`. Ignored when + imap.tunnel is set. + +imap.preformattedHTML:: + A boolean to enable/disable the use of html encoding when sending + a patch. An html encoded patch will be bracketed with <pre> + and have a content type of text/html. Ironically, enabling this + option causes Thunderbird to send the patch as a plain/text, + format=fixed email. Default is `false`. + +imap.authMethod:: + Specify authenticate method for authentication with IMAP server. + If Git was built with the NO_CURL option, or if your curl version is older + than 7.34.0, or if you're running git-imap-send with the `--no-curl` + option, the only supported method is 'CRAM-MD5'. If this is not set + then 'git imap-send' uses the basic IMAP plaintext LOGIN command. diff --git a/Documentation/config/index.txt b/Documentation/config/index.txt new file mode 100644 index 0000000000..4b94b6bedc --- /dev/null +++ b/Documentation/config/index.txt @@ -0,0 +1,10 @@ +index.threads:: + Specifies the number of threads to spawn when loading the index. + This is meant to reduce index load time on multiprocessor machines. + Specifying 0 or 'true' will cause Git to auto-detect the number of + CPU's and set the number of threads accordingly. Specifying 1 or + 'false' will disable multithreading. Defaults to 'true'. + +index.version:: + Specify the version with which new index files should be + initialized. This does not affect existing repositories. diff --git a/Documentation/config/init.txt b/Documentation/config/init.txt new file mode 100644 index 0000000000..46fa8c6a08 --- /dev/null +++ b/Documentation/config/init.txt @@ -0,0 +1,3 @@ +init.templateDir:: + Specify the directory from which templates will be copied. + (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) diff --git a/Documentation/config/instaweb.txt b/Documentation/config/instaweb.txt new file mode 100644 index 0000000000..50cb2f7d62 --- /dev/null +++ b/Documentation/config/instaweb.txt @@ -0,0 +1,20 @@ +instaweb.browser:: + Specify the program that will be used to browse your working + repository in gitweb. See linkgit:git-instaweb[1]. + +instaweb.httpd:: + The HTTP daemon command-line to start gitweb on your working + repository. See linkgit:git-instaweb[1]. + +instaweb.local:: + If true the web server started by linkgit:git-instaweb[1] will + be bound to the local IP (127.0.0.1). + +instaweb.modulePath:: + The default module path for linkgit:git-instaweb[1] to use + instead of /usr/lib/apache2/modules. Only used if httpd + is Apache. + +instaweb.port:: + The port number to bind the gitweb httpd to. See + linkgit:git-instaweb[1]. diff --git a/Documentation/config/interactive.txt b/Documentation/config/interactive.txt new file mode 100644 index 0000000000..ad846dd7c9 --- /dev/null +++ b/Documentation/config/interactive.txt @@ -0,0 +1,16 @@ +interactive.singleKey:: + In interactive commands, allow the user to provide one-letter + input with a single key (i.e., without hitting enter). + Currently this is used by the `--patch` mode of + linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], + linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this + setting is silently ignored if portable keystroke input + is not available; requires the Perl module Term::ReadKey. + +interactive.diffFilter:: + When an interactive command (such as `git add --patch`) shows + a colorized diff, git will pipe the diff through the shell + command defined by this configuration variable. The command may + mark up the diff further for human consumption, provided that it + retains a one-to-one correspondence with the lines in the + original diff. Defaults to disabled (no filtering). diff --git a/Documentation/config/log.txt b/Documentation/config/log.txt new file mode 100644 index 0000000000..78d9e4453a --- /dev/null +++ b/Documentation/config/log.txt @@ -0,0 +1,43 @@ +log.abbrevCommit:: + If true, makes linkgit:git-log[1], linkgit:git-show[1], and + linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may + override this option with `--no-abbrev-commit`. + +log.date:: + Set the default date-time mode for the 'log' command. + Setting a value for log.date is similar to using 'git log''s + `--date` option. See linkgit:git-log[1] for details. + +log.decorate:: + Print out the ref names of any commits that are shown by the log + command. If 'short' is specified, the ref name prefixes 'refs/heads/', + 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is + specified, the full ref name (including prefix) will be printed. + If 'auto' is specified, then if the output is going to a terminal, + the ref names are shown as if 'short' were given, otherwise no ref + names are shown. This is the same as the `--decorate` option + of the `git log`. + +log.follow:: + If `true`, `git log` will act as if the `--follow` option was used when + a single <path> is given. This has the same limitations as `--follow`, + i.e. it cannot be used to follow multiple files and does not work well + on non-linear history. + +log.graphColors:: + A list of colors, separated by commas, that can be used to draw + history lines in `git log --graph`. + +log.showRoot:: + If true, the initial commit will be shown as a big creation event. + This is equivalent to a diff against an empty tree. + Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which + normally hide the root commit will now show it. True by default. + +log.showSignature:: + If true, makes linkgit:git-log[1], linkgit:git-show[1], and + linkgit:git-whatchanged[1] assume `--show-signature`. + +log.mailmap:: + If true, makes linkgit:git-log[1], linkgit:git-show[1], and + linkgit:git-whatchanged[1] assume `--use-mailmap`. diff --git a/Documentation/config/mailinfo.txt b/Documentation/config/mailinfo.txt new file mode 100644 index 0000000000..3854d4ae37 --- /dev/null +++ b/Documentation/config/mailinfo.txt @@ -0,0 +1,6 @@ +mailinfo.scissors:: + If true, makes linkgit:git-mailinfo[1] (and therefore + linkgit:git-am[1]) act by default as if the --scissors option + was provided on the command-line. When active, this features + removes everything from the message body before a scissors + line (i.e. consisting mainly of ">8", "8<" and "-"). diff --git a/Documentation/config/mailmap.txt b/Documentation/config/mailmap.txt new file mode 100644 index 0000000000..48cbc30722 --- /dev/null +++ b/Documentation/config/mailmap.txt @@ -0,0 +1,15 @@ +mailmap.file:: + The location of an augmenting mailmap file. The default + mailmap, located in the root of the repository, is loaded + first, then the mailmap file pointed to by this variable. + The location of the mailmap file may be in a repository + subdirectory, or somewhere outside of the repository itself. + See linkgit:git-shortlog[1] and linkgit:git-blame[1]. + +mailmap.blob:: + Like `mailmap.file`, but consider the value as a reference to a + blob in the repository. If both `mailmap.file` and + `mailmap.blob` are given, both are parsed, with entries from + `mailmap.file` taking precedence. In a bare repository, this + defaults to `HEAD:.mailmap`. In a non-bare repository, it + defaults to empty. diff --git a/Documentation/config/man.txt b/Documentation/config/man.txt new file mode 100644 index 0000000000..a727d987a8 --- /dev/null +++ b/Documentation/config/man.txt @@ -0,0 +1,12 @@ +man.viewer:: + Specify the programs that may be used to display help in the + 'man' format. See linkgit:git-help[1]. + +man.<tool>.cmd:: + Specify the command to invoke the specified man viewer. The + specified command is evaluated in shell with the man page + passed as argument. (See linkgit:git-help[1].) + +man.<tool>.path:: + Override the path for the given tool that may be used to + display help in the 'man' format. See linkgit:git-help[1]. diff --git a/Documentation/merge-config.txt b/Documentation/config/merge.txt index a7f4ea90c1..d389c73929 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/config/merge.txt @@ -30,7 +30,7 @@ merge.verifySignatures:: If true, this is equivalent to the --verify-signatures command line option. See linkgit:git-merge[1] for details. -include::fmt-merge-msg-config.txt[] +include::fmt-merge-msg.txt[] merge.renameLimit:: The number of files to consider when performing rename detection @@ -69,7 +69,7 @@ merge.guitool:: Any other value is treated as a custom merge tool and requires that a corresponding mergetool.<guitool>.cmd variable is defined. -include::mergetools-merge.txt[] +include::../mergetools-merge.txt[] merge.verbosity:: Controls the amount of output shown by the recursive merge diff --git a/Documentation/config/mergetool.txt b/Documentation/config/mergetool.txt new file mode 100644 index 0000000000..09ed31dbfa --- /dev/null +++ b/Documentation/config/mergetool.txt @@ -0,0 +1,53 @@ +mergetool.<tool>.path:: + Override the path for the given tool. This is useful in case + your tool is not in the PATH. + +mergetool.<tool>.cmd:: + Specify the command to invoke the specified merge tool. The + specified command is evaluated in shell with the following + variables available: 'BASE' is the name of a temporary file + containing the common base of the files to be merged, if available; + 'LOCAL' is the name of a temporary file containing the contents of + the file on the current branch; 'REMOTE' is the name of a temporary + file containing the contents of the file from the branch being + merged; 'MERGED' contains the name of the file to which the merge + tool should write the results of a successful merge. + +mergetool.<tool>.trustExitCode:: + For a custom merge command, specify whether the exit code of + the merge command can be used to determine whether the merge was + successful. If this is not set to true then the merge target file + timestamp is checked and the merge assumed to have been successful + if the file has been updated, otherwise the user is prompted to + indicate the success of the merge. + +mergetool.meld.hasOutput:: + Older versions of `meld` do not support the `--output` option. + Git will attempt to detect whether `meld` supports `--output` + by inspecting the output of `meld --help`. Configuring + `mergetool.meld.hasOutput` will make Git skip these checks and + use the configured value instead. Setting `mergetool.meld.hasOutput` + to `true` tells Git to unconditionally use the `--output` option, + and `false` avoids using `--output`. + +mergetool.keepBackup:: + After performing a merge, the original file with conflict markers + can be saved as a file with a `.orig` extension. If this variable + is set to `false` then this file is not preserved. Defaults to + `true` (i.e. keep the backup files). + +mergetool.keepTemporaries:: + When invoking a custom merge tool, Git uses a set of temporary + files to pass to the tool. If the tool returns an error and this + variable is set to `true`, then these temporary files will be + preserved, otherwise they will be removed after the tool has + exited. Defaults to `false`. + +mergetool.writeToTemp:: + Git writes temporary 'BASE', 'LOCAL', and 'REMOTE' versions of + conflicting files in the worktree by default. Git will attempt + to use a temporary directory for these files when set `true`. + Defaults to `false`. + +mergetool.prompt:: + Prompt before each invocation of the merge resolution program. diff --git a/Documentation/config/notes.txt b/Documentation/config/notes.txt new file mode 100644 index 0000000000..aeef56d49a --- /dev/null +++ b/Documentation/config/notes.txt @@ -0,0 +1,59 @@ +notes.mergeStrategy:: + Which merge strategy to choose by default when resolving notes + conflicts. Must be one of `manual`, `ours`, `theirs`, `union`, or + `cat_sort_uniq`. Defaults to `manual`. See "NOTES MERGE STRATEGIES" + section of linkgit:git-notes[1] for more information on each strategy. + +notes.<name>.mergeStrategy:: + Which merge strategy to choose when doing a notes merge into + refs/notes/<name>. This overrides the more general + "notes.mergeStrategy". See the "NOTES MERGE STRATEGIES" section in + linkgit:git-notes[1] for more information on the available strategies. + +notes.displayRef:: + The (fully qualified) refname from which to show notes when + showing commit messages. The value of this variable can be set + to a glob, in which case notes from all matching refs will be + shown. You may also specify this configuration variable + several times. A warning will be issued for refs that do not + exist, but a glob that does not match any refs is silently + ignored. ++ +This setting can be overridden with the `GIT_NOTES_DISPLAY_REF` +environment variable, which must be a colon separated list of refs or +globs. ++ +The effective value of "core.notesRef" (possibly overridden by +GIT_NOTES_REF) is also implicitly added to the list of refs to be +displayed. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`) and this variable is set to `true`, Git + automatically copies your notes from the original to the + rewritten commit. Defaults to `true`, but see + "notes.rewriteRef" below. + +notes.rewriteMode:: + When copying notes during a rewrite (see the + "notes.rewrite.<command>" option), determines what to do if + the target commit already has a note. Must be one of + `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`. + Defaults to `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. The ref may be a + glob, in which case notes in all matching refs will be copied. + You may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. Set it to `refs/notes/commits` to enable +rewriting for the default commit notes. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_REF` +environment variable, which must be a colon separated list of refs or +globs. diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt new file mode 100644 index 0000000000..edac75c83f --- /dev/null +++ b/Documentation/config/pack.txt @@ -0,0 +1,120 @@ +pack.window:: + The size of the window used by linkgit:git-pack-objects[1] when no + window size is given on the command line. Defaults to 10. + +pack.depth:: + The maximum delta depth used by linkgit:git-pack-objects[1] when no + maximum depth is given on the command line. Defaults to 50. + Maximum value is 4095. + +pack.windowMemory:: + The maximum size of memory that is consumed by each thread + in linkgit:git-pack-objects[1] for pack window memory when + no limit is given on the command line. The value can be + suffixed with "k", "m", or "g". When left unconfigured (or + set explicitly to 0), there will be no limit. + +pack.compression:: + An integer -1..9, indicating the compression level for objects + in a pack file. -1 is the zlib default. 0 means no + compression, and 1..9 are various speed/size tradeoffs, 9 being + slowest. If not set, defaults to core.compression. If that is + not set, defaults to -1, the zlib default, which is "a default + compromise between speed and compression (currently equivalent + to level 6)." ++ +Note that changing the compression level will not automatically recompress +all existing objects. You can force recompression by passing the -F option +to linkgit:git-repack[1]. + +pack.island:: + An extended regular expression configuring a set of delta + islands. See "DELTA ISLANDS" in linkgit:git-pack-objects[1] + for details. + +pack.islandCore:: + Specify an island name which gets to have its objects be + packed first. This creates a kind of pseudo-pack at the front + of one pack, so that the objects from the specified island are + hopefully faster to copy into any pack that should be served + to a user requesting these objects. In practice this means + that the island specified should likely correspond to what is + the most commonly cloned in the repo. See also "DELTA ISLANDS" + in linkgit:git-pack-objects[1]. + +pack.deltaCacheSize:: + The maximum memory in bytes used for caching deltas in + linkgit:git-pack-objects[1] before writing them out to a pack. + This cache is used to speed up the writing object phase by not + having to recompute the final delta result once the best match + for all objects is found. Repacking large repositories on machines + which are tight with memory might be badly impacted by this though, + especially if this cache pushes the system into swapping. + A value of 0 means no limit. The smallest size of 1 byte may be + used to virtually disable this cache. Defaults to 256 MiB. + +pack.deltaCacheLimit:: + The maximum size of a delta, that is cached in + linkgit:git-pack-objects[1]. This cache is used to speed up the + writing object phase by not having to recompute the final delta + result once the best match for all objects is found. + Defaults to 1000. Maximum value is 65535. + +pack.threads:: + Specifies the number of threads to spawn when searching for best + delta matches. This requires that linkgit:git-pack-objects[1] + be compiled with pthreads otherwise this option is ignored with a + warning. This is meant to reduce packing time on multiprocessor + machines. The required amount of memory for the delta search window + is however multiplied by the number of threads. + Specifying 0 will cause Git to auto-detect the number of CPU's + and set the number of threads accordingly. + +pack.indexVersion:: + Specify the default pack index version. Valid values are 1 for + legacy pack index used by Git versions prior to 1.5.2, and 2 for + the new pack index with capabilities for packs larger than 4 GB + as well as proper protection against the repacking of corrupted + packs. Version 2 is the default. Note that version 2 is enforced + and this config option ignored whenever the corresponding pack is + larger than 2 GB. ++ +If you have an old Git that does not understand the version 2 `*.idx` file, +cloning or fetching over a non native protocol (e.g. "http") +that will copy both `*.pack` file and corresponding `*.idx` file from the +other side may give you a repository that cannot be accessed with your +older version of Git. If the `*.pack` file is smaller than 2 GB, however, +you can use linkgit:git-index-pack[1] on the *.pack file to regenerate +the `*.idx` file. + +pack.packSizeLimit:: + The maximum size of a pack. This setting only affects + packing to a file when repacking, i.e. the git:// protocol + is unaffected. It can be overridden by the `--max-pack-size` + option of linkgit:git-repack[1]. Reaching this limit results + in the creation of multiple packfiles; which in turn prevents + bitmaps from being created. + The minimum size allowed is limited to 1 MiB. + The default is unlimited. + Common unit suffixes of 'k', 'm', or 'g' are + supported. + +pack.useBitmaps:: + When true, git will use pack bitmaps (if available) when packing + to stdout (e.g., during the server side of a fetch). Defaults to + true. You should not generally need to turn this off unless + you are debugging pack bitmaps. + +pack.writeBitmaps (deprecated):: + This is a deprecated synonym for `repack.writeBitmaps`. + +pack.writeBitmapHashCache:: + When true, git will include a "hash cache" section in the bitmap + index (if one is written). This cache can be used to feed git's + delta heuristics, potentially leading to better deltas between + bitmapped and non-bitmapped objects (e.g., when serving a fetch + between an older, bitmapped pack and objects that have been + pushed since the last gc). The downside is that it consumes 4 + bytes per object of disk space, and that JGit's bitmap + implementation does not understand it, causing it to complain if + Git and JGit are used on the same repository. Defaults to false. diff --git a/Documentation/config/pager.txt b/Documentation/config/pager.txt new file mode 100644 index 0000000000..d3731cf66c --- /dev/null +++ b/Documentation/config/pager.txt @@ -0,0 +1,8 @@ +pager.<cmd>:: + If the value is boolean, turns on or off pagination of the + output of a particular Git subcommand when writing to a tty. + Otherwise, turns on pagination for the subcommand using the + pager specified by the value of `pager.<cmd>`. If `--paginate` + or `--no-pager` is specified on the command line, it takes + precedence over this option. To disable pagination for all + commands, set `core.pager` or `GIT_PAGER` to `cat`. diff --git a/Documentation/config/pretty.txt b/Documentation/config/pretty.txt new file mode 100644 index 0000000000..063c6b63d9 --- /dev/null +++ b/Documentation/config/pretty.txt @@ -0,0 +1,9 @@ +pretty.<name>:: + Alias for a --pretty= format string, as specified in + linkgit:git-log[1]. Any aliases defined here can be used just + as the built-in pretty formats could. For example, + running `git config pretty.changelog "format:* %H %s"` + would cause the invocation `git log --pretty=changelog` + to be equivalent to running `git log "--pretty=format:* %H %s"`. + Note that an alias with the same name as a built-in format + will be silently ignored. diff --git a/Documentation/config/protocol.txt b/Documentation/config/protocol.txt new file mode 100644 index 0000000000..bfccc07491 --- /dev/null +++ b/Documentation/config/protocol.txt @@ -0,0 +1,64 @@ +protocol.allow:: + If set, provide a user defined default policy for all protocols which + don't explicitly have a policy (`protocol.<name>.allow`). By default, + if unset, known-safe protocols (http, https, git, ssh, file) have a + default policy of `always`, known-dangerous protocols (ext) have a + default policy of `never`, and all other protocols have a default + policy of `user`. Supported policies: ++ +-- + +* `always` - protocol is always able to be used. + +* `never` - protocol is never able to be used. + +* `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is + either unset or has a value of 1. This policy should be used when you want a + protocol to be directly usable by the user but don't want it used by commands which + execute clone/fetch/push commands without user input, e.g. recursive + submodule initialization. + +-- + +protocol.<name>.allow:: + Set a policy to be used by protocol `<name>` with clone/fetch/push + commands. See `protocol.allow` above for the available policies. ++ +The protocol names currently used by git are: ++ +-- + - `file`: any local file-based path (including `file://` URLs, + or local paths) + + - `git`: the anonymous git protocol over a direct TCP + connection (or proxy, if configured) + + - `ssh`: git over ssh (including `host:path` syntax, + `ssh://`, etc). + + - `http`: git over http, both "smart http" and "dumb http". + Note that this does _not_ include `https`; if you want to configure + both, you must do so individually. + + - any external helpers are named by their protocol (e.g., use + `hg` to allow the `git-remote-hg` helper) +-- + +protocol.version:: + Experimental. If set, clients will attempt to communicate with a + server using the specified protocol version. If unset, no + attempt will be made by the client to communicate using a + particular protocol version, this results in protocol version 0 + being used. + Supported versions: ++ +-- + +* `0` - the original wire protocol. + +* `1` - the original wire protocol with the addition of a version string + in the initial response from the server. + +* `2` - link:technical/protocol-v2.html[wire protocol version 2]. + +-- diff --git a/Documentation/pull-config.txt b/Documentation/config/pull.txt index bb23a9947d..bb23a9947d 100644 --- a/Documentation/pull-config.txt +++ b/Documentation/config/pull.txt diff --git a/Documentation/push-config.txt b/Documentation/config/push.txt index 0a0e000569..0a0e000569 100644 --- a/Documentation/push-config.txt +++ b/Documentation/config/push.txt diff --git a/Documentation/rebase-config.txt b/Documentation/config/rebase.txt index 42e1ba7575..42e1ba7575 100644 --- a/Documentation/rebase-config.txt +++ b/Documentation/config/rebase.txt diff --git a/Documentation/receive-config.txt b/Documentation/config/receive.txt index 65f78aac37..65f78aac37 100644 --- a/Documentation/receive-config.txt +++ b/Documentation/config/receive.txt diff --git a/Documentation/config/remote.txt b/Documentation/config/remote.txt new file mode 100644 index 0000000000..6c4cad83a2 --- /dev/null +++ b/Documentation/config/remote.txt @@ -0,0 +1,78 @@ +remote.pushDefault:: + The remote to push to by default. Overrides + `branch.<name>.remote` for all branches, and is overridden by + `branch.<name>.pushRemote` for specific branches. + +remote.<name>.url:: + The URL of a remote repository. See linkgit:git-fetch[1] or + linkgit:git-push[1]. + +remote.<name>.pushurl:: + The push URL of a remote repository. See linkgit:git-push[1]. + +remote.<name>.proxy:: + For remotes that require curl (http, https and ftp), the URL to + the proxy to use for that remote. Set to the empty string to + disable proxying for that remote. + +remote.<name>.proxyAuthMethod:: + For remotes that require curl (http, https and ftp), the method to use for + authenticating against the proxy in use (probably set in + `remote.<name>.proxy`). See `http.proxyAuthMethod`. + +remote.<name>.fetch:: + The default set of "refspec" for linkgit:git-fetch[1]. See + linkgit:git-fetch[1]. + +remote.<name>.push:: + The default set of "refspec" for linkgit:git-push[1]. See + linkgit:git-push[1]. + +remote.<name>.mirror:: + If true, pushing to this remote will automatically behave + as if the `--mirror` option was given on the command line. + +remote.<name>.skipDefaultUpdate:: + If true, this remote will be skipped by default when updating + using linkgit:git-fetch[1] or the `update` subcommand of + linkgit:git-remote[1]. + +remote.<name>.skipFetchAll:: + If true, this remote will be skipped by default when updating + using linkgit:git-fetch[1] or the `update` subcommand of + linkgit:git-remote[1]. + +remote.<name>.receivepack:: + The default program to execute on the remote side when pushing. See + option --receive-pack of linkgit:git-push[1]. + +remote.<name>.uploadpack:: + The default program to execute on the remote side when fetching. See + option --upload-pack of linkgit:git-fetch-pack[1]. + +remote.<name>.tagOpt:: + Setting this value to --no-tags disables automatic tag following when + fetching from remote <name>. Setting it to --tags will fetch every + tag from remote <name>, even if they are not reachable from remote + branch heads. Passing these flags directly to linkgit:git-fetch[1] can + override this setting. See options --tags and --no-tags of + linkgit:git-fetch[1]. + +remote.<name>.vcs:: + Setting this to a value <vcs> will cause Git to interact with + the remote with the git-remote-<vcs> helper. + +remote.<name>.prune:: + When set to true, fetching from this remote by default will also + remove any remote-tracking references that no longer exist on the + remote (as if the `--prune` option was given on the command line). + Overrides `fetch.prune` settings, if any. + +remote.<name>.pruneTags:: + When set to true, fetching from this remote by default will also + remove any local tags that no longer exist on the remote if pruning + is activated in general via `remote.<name>.prune`, `fetch.prune` or + `--prune`. Overrides `fetch.pruneTags` settings, if any. ++ +See also `remote.<name>.prune` and the PRUNING section of +linkgit:git-fetch[1]. diff --git a/Documentation/config/remotes.txt b/Documentation/config/remotes.txt new file mode 100644 index 0000000000..4cfe03221e --- /dev/null +++ b/Documentation/config/remotes.txt @@ -0,0 +1,3 @@ +remotes.<group>:: + The list of remotes which are fetched by "git remote update + <group>". See linkgit:git-remote[1]. diff --git a/Documentation/config/repack.txt b/Documentation/config/repack.txt new file mode 100644 index 0000000000..a5c37813fd --- /dev/null +++ b/Documentation/config/repack.txt @@ -0,0 +1,27 @@ +repack.useDeltaBaseOffset:: + By default, linkgit:git-repack[1] creates packs that use + delta-base offset. If you need to share your repository with + Git older than version 1.4.4, either directly or via a dumb + protocol such as http, then you need to set this option to + "false" and repack. Access from old Git versions over the + native protocol are unaffected by this option. + +repack.packKeptObjects:: + If set to true, makes `git repack` act as if + `--pack-kept-objects` was passed. See linkgit:git-repack[1] for + details. Defaults to `false` normally, but `true` if a bitmap + index is being written (either via `--write-bitmap-index` or + `repack.writeBitmaps`). + +repack.useDeltaIslands:: + If set to true, makes `git repack` act as if `--delta-islands` + was passed. Defaults to `false`. + +repack.writeBitmaps:: + When true, git will write a bitmap index when packing all + objects to disk (e.g., when `git repack -a` is run). This + index can speed up the "counting objects" phase of subsequent + packs created for clones and fetches, at the cost of some disk + space and extra time spent on the initial repack. This has + no effect if multiple packfiles are created. + Defaults to false. diff --git a/Documentation/config/rerere.txt b/Documentation/config/rerere.txt new file mode 100644 index 0000000000..40abdf6a6b --- /dev/null +++ b/Documentation/config/rerere.txt @@ -0,0 +1,12 @@ +rerere.autoUpdate:: + When set to true, `git-rerere` updates the index with the + resulting contents after it cleanly resolves conflicts using + previously recorded resolution. Defaults to false. + +rerere.enabled:: + Activate recording of resolved conflicts, so that identical + conflict hunks can be resolved automatically, should they be + encountered again. By default, linkgit:git-rerere[1] is + enabled if there is an `rr-cache` directory under the + `$GIT_DIR`, e.g. if "rerere" was previously used in the + repository. diff --git a/Documentation/config/reset.txt b/Documentation/config/reset.txt new file mode 100644 index 0000000000..63b7c45aac --- /dev/null +++ b/Documentation/config/reset.txt @@ -0,0 +1,2 @@ +reset.quiet:: + When set to true, 'git reset' will default to the '--quiet' option. diff --git a/Documentation/sendemail-config.txt b/Documentation/config/sendemail.txt index 0006faf800..0006faf800 100644 --- a/Documentation/sendemail-config.txt +++ b/Documentation/config/sendemail.txt diff --git a/Documentation/config/sequencer.txt b/Documentation/config/sequencer.txt new file mode 100644 index 0000000000..b48d532a96 --- /dev/null +++ b/Documentation/config/sequencer.txt @@ -0,0 +1,5 @@ +sequence.editor:: + Text editor used by `git rebase -i` for editing the rebase instruction file. + The value is meant to be interpreted by the shell when it is used. + It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. + When not configured the default commit message editor is used instead. diff --git a/Documentation/config/showbranch.txt b/Documentation/config/showbranch.txt new file mode 100644 index 0000000000..e79ecd9ee9 --- /dev/null +++ b/Documentation/config/showbranch.txt @@ -0,0 +1,3 @@ +showBranch.default:: + The default set of branches for linkgit:git-show-branch[1]. + See linkgit:git-show-branch[1]. diff --git a/Documentation/config/splitindex.txt b/Documentation/config/splitindex.txt new file mode 100644 index 0000000000..afdb186df8 --- /dev/null +++ b/Documentation/config/splitindex.txt @@ -0,0 +1,24 @@ +splitIndex.maxPercentChange:: + When the split index feature is used, this specifies the + percent of entries the split index can contain compared to the + total number of entries in both the split index and the shared + index before a new shared index is written. + The value should be between 0 and 100. If the value is 0 then + a new shared index is always written, if it is 100 a new + shared index is never written. + By default the value is 20, so a new shared index is written + if the number of entries in the split index would be greater + than 20 percent of the total number of entries. + See linkgit:git-update-index[1]. + +splitIndex.sharedIndexExpire:: + When the split index feature is used, shared index files that + were not modified since the time this variable specifies will + be removed when a new shared index file is created. The value + "now" expires all entries immediately, and "never" suppresses + expiration altogether. + The default value is "2.weeks.ago". + Note that a shared index file is considered modified (for the + purpose of expiration) each time a new split-index file is + either created based on it or read from it. + See linkgit:git-update-index[1]. diff --git a/Documentation/config/ssh.txt b/Documentation/config/ssh.txt new file mode 100644 index 0000000000..2ca4bf93e1 --- /dev/null +++ b/Documentation/config/ssh.txt @@ -0,0 +1,35 @@ +ssh.variant:: + By default, Git determines the command line arguments to use + based on the basename of the configured SSH command (configured + using the environment variable `GIT_SSH` or `GIT_SSH_COMMAND` or + the config setting `core.sshCommand`). If the basename is + unrecognized, Git will attempt to detect support of OpenSSH + options by first invoking the configured SSH command with the + `-G` (print configuration) option and will subsequently use + OpenSSH options (if that is successful) or no options besides + the host and remote command (if it fails). ++ +The config variable `ssh.variant` can be set to override this detection. +Valid values are `ssh` (to use OpenSSH options), `plink`, `putty`, +`tortoiseplink`, `simple` (no options except the host and remote command). +The default auto-detection can be explicitly requested using the value +`auto`. Any other value is treated as `ssh`. This setting can also be +overridden via the environment variable `GIT_SSH_VARIANT`. ++ +The current command-line parameters used for each variant are as +follows: ++ +-- + +* `ssh` - [-p port] [-4] [-6] [-o option] [username@]host command + +* `simple` - [username@]host command + +* `plink` or `putty` - [-P port] [-4] [-6] [username@]host command + +* `tortoiseplink` - [-P port] [-4] [-6] -batch [username@]host command + +-- ++ +Except for the `simple` variant, command-line parameters are likely to +change as git gains new features. diff --git a/Documentation/config/stash.txt b/Documentation/config/stash.txt new file mode 100644 index 0000000000..c583d46d6b --- /dev/null +++ b/Documentation/config/stash.txt @@ -0,0 +1,9 @@ +stash.showPatch:: + If this is set to true, the `git stash show` command without an + option will show the stash entry in patch form. Defaults to false. + See description of 'show' command in linkgit:git-stash[1]. + +stash.showStat:: + If this is set to true, the `git stash show` command without an + option will show diffstat of the stash entry. Defaults to true. + See description of 'show' command in linkgit:git-stash[1]. diff --git a/Documentation/config/status.txt b/Documentation/config/status.txt new file mode 100644 index 0000000000..ed72fa7dae --- /dev/null +++ b/Documentation/config/status.txt @@ -0,0 +1,72 @@ +status.relativePaths:: + By default, linkgit:git-status[1] shows paths relative to the + current directory. Setting this variable to `false` shows paths + relative to the repository root (this was the default for Git + prior to v1.5.4). + +status.short:: + Set to true to enable --short by default in linkgit:git-status[1]. + The option --no-short takes precedence over this variable. + +status.branch:: + Set to true to enable --branch by default in linkgit:git-status[1]. + The option --no-branch takes precedence over this variable. + +status.displayCommentPrefix:: + If set to true, linkgit:git-status[1] will insert a comment + prefix before each output line (starting with + `core.commentChar`, i.e. `#` by default). This was the + behavior of linkgit:git-status[1] in Git 1.8.4 and previous. + Defaults to false. + +status.renameLimit:: + The number of files to consider when performing rename detection + in linkgit:git-status[1] and linkgit:git-commit[1]. Defaults to + the value of diff.renameLimit. + +status.renames:: + Whether and how Git detects renames in linkgit:git-status[1] and + linkgit:git-commit[1] . If set to "false", rename detection is + disabled. If set to "true", basic rename detection is enabled. + If set to "copies" or "copy", Git will detect copies, as well. + Defaults to the value of diff.renames. + +status.showStash:: + If set to true, linkgit:git-status[1] will display the number of + entries currently stashed away. + Defaults to false. + +status.showUntrackedFiles:: + By default, linkgit:git-status[1] and linkgit:git-commit[1] show + files which are not currently tracked by Git. Directories which + contain only untracked files, are shown with the directory name + only. Showing untracked files means that Git needs to lstat() all + the files in the whole repository, which might be slow on some + systems. So, this variable controls how the commands displays + the untracked files. Possible values are: ++ +-- +* `no` - Show no untracked files. +* `normal` - Show untracked files and directories. +* `all` - Show also individual files in untracked directories. +-- ++ +If this variable is not specified, it defaults to 'normal'. +This variable can be overridden with the -u|--untracked-files option +of linkgit:git-status[1] and linkgit:git-commit[1]. + +status.submoduleSummary:: + Defaults to false. + If this is set to a non zero number or true (identical to -1 or an + unlimited number), the submodule summary will be enabled and a + summary of commits for modified submodules will be shown (see + --summary-limit option of linkgit:git-submodule[1]). Please note + that the summary output command will be suppressed for all + submodules when `diff.ignoreSubmodules` is set to 'all' or only + for those submodules where `submodule.<name>.ignore=all`. The only + exception to that rule is that status and commit will show staged + submodule changes. To + also view the summary for ignored submodules you can either use + the --ignore-submodules=dirty command-line option or the 'git + submodule summary' command, which shows a similar output but does + not honor these settings. diff --git a/Documentation/submodule-config.txt b/Documentation/config/submodule.txt index 0a1293b051..0a1293b051 100644 --- a/Documentation/submodule-config.txt +++ b/Documentation/config/submodule.txt diff --git a/Documentation/config/tag.txt b/Documentation/config/tag.txt new file mode 100644 index 0000000000..663663bdec --- /dev/null +++ b/Documentation/config/tag.txt @@ -0,0 +1,16 @@ +tag.forceSignAnnotated:: + A boolean to specify whether annotated tags created should be GPG signed. + If `--annotate` is specified on the command line, it takes + precedence over this option. + +tag.sort:: + This variable controls the sort ordering of tags when displayed by + linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the + value of this variable will be used as the default. + +tar.umask:: + This variable can be used to restrict the permission bits of + tar archive entries. The default is 0002, which turns off the + world write bit. The special value "user" indicates that the + archiving user's umask will be used instead. See umask(2) and + linkgit:git-archive[1]. diff --git a/Documentation/config/transfer.txt b/Documentation/config/transfer.txt new file mode 100644 index 0000000000..4a5dfe2fc1 --- /dev/null +++ b/Documentation/config/transfer.txt @@ -0,0 +1,71 @@ +transfer.fsckObjects:: + When `fetch.fsckObjects` or `receive.fsckObjects` are + not set, the value of this variable is used instead. + Defaults to false. ++ +When set, the fetch or receive will abort in the case of a malformed +object or a link to a nonexistent object. In addition, various other +issues are checked for, including legacy issues (see `fsck.<msg-id>`), +and potential security issues like the existence of a `.GIT` directory +or a malicious `.gitmodules` file (see the release notes for v2.2.1 +and v2.17.1 for details). Other sanity and security checks may be +added in future releases. ++ +On the receiving side, failing fsckObjects will make those objects +unreachable, see "QUARANTINE ENVIRONMENT" in +linkgit:git-receive-pack[1]. On the fetch side, malformed objects will +instead be left unreferenced in the repository. ++ +Due to the non-quarantine nature of the `fetch.fsckObjects` +implementation it can not be relied upon to leave the object store +clean like `receive.fsckObjects` can. ++ +As objects are unpacked they're written to the object store, so there +can be cases where malicious objects get introduced even though the +"fetch" failed, only to have a subsequent "fetch" succeed because only +new incoming objects are checked, not those that have already been +written to the object store. That difference in behavior should not be +relied upon. In the future, such objects may be quarantined for +"fetch" as well. ++ +For now, the paranoid need to find some way to emulate the quarantine +environment if they'd like the same protection as "push". E.g. in the +case of an internal mirror do the mirroring in two steps, one to fetch +the untrusted objects, and then do a second "push" (which will use the +quarantine) to another internal repo, and have internal clients +consume this pushed-to repository, or embargo internal fetches and +only allow them once a full "fsck" has run (and no new fetches have +happened in the meantime). + +transfer.hideRefs:: + String(s) `receive-pack` and `upload-pack` use to decide which + refs to omit from their initial advertisements. Use more than + one definition to specify multiple prefix strings. A ref that is + under the hierarchies listed in the value of this variable is + excluded, and is hidden when responding to `git push` or `git + fetch`. See `receive.hideRefs` and `uploadpack.hideRefs` for + program-specific versions of this config. ++ +You may also include a `!` in front of the ref name to negate the entry, +explicitly exposing it, even if an earlier entry marked it as hidden. +If you have multiple hideRefs values, later entries override earlier ones +(and entries in more-specific config files override less-specific ones). ++ +If a namespace is in use, the namespace prefix is stripped from each +reference before it is matched against `transfer.hiderefs` patterns. +For example, if `refs/heads/master` is specified in `transfer.hideRefs` and +the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master` +is omitted from the advertisements but `refs/heads/master` and +`refs/namespaces/bar/refs/heads/master` are still advertised as so-called +"have" lines. In order to match refs before stripping, add a `^` in front of +the ref name. If you combine `!` and `^`, `!` must be specified first. ++ +Even if you hide refs, a client may still be able to steal the target +objects via the techniques described in the "SECURITY" section of the +linkgit:gitnamespaces[7] man page; it's best to keep private data in a +separate repository. + +transfer.unpackLimit:: + When `fetch.unpackLimit` or `receive.unpackLimit` are + not set, the value of this variable is used instead. + The default value is 100. diff --git a/Documentation/config/uploadarchive.txt b/Documentation/config/uploadarchive.txt new file mode 100644 index 0000000000..e0698e8c1d --- /dev/null +++ b/Documentation/config/uploadarchive.txt @@ -0,0 +1,6 @@ +uploadarchive.allowUnreachable:: + If true, allow clients to use `git archive --remote` to request + any tree, whether reachable from the ref tips or not. See the + discussion in the "SECURITY" section of + linkgit:git-upload-archive[1] for more details. Defaults to + `false`. diff --git a/Documentation/config/uploadpack.txt b/Documentation/config/uploadpack.txt new file mode 100644 index 0000000000..ed1c835695 --- /dev/null +++ b/Documentation/config/uploadpack.txt @@ -0,0 +1,65 @@ +uploadpack.hideRefs:: + This variable is the same as `transfer.hideRefs`, but applies + only to `upload-pack` (and so affects only fetches, not pushes). + An attempt to fetch a hidden ref by `git fetch` will fail. See + also `uploadpack.allowTipSHA1InWant`. + +uploadpack.allowTipSHA1InWant:: + When `uploadpack.hideRefs` is in effect, allow `upload-pack` + to accept a fetch request that asks for an object at the tip + of a hidden ref (by default, such a request is rejected). + See also `uploadpack.hideRefs`. Even if this is false, a client + may be able to steal objects via the techniques described in the + "SECURITY" section of the linkgit:gitnamespaces[7] man page; it's + best to keep private data in a separate repository. + +uploadpack.allowReachableSHA1InWant:: + Allow `upload-pack` to accept a fetch request that asks for an + object that is reachable from any ref tip. However, note that + calculating object reachability is computationally expensive. + Defaults to `false`. Even if this is false, a client may be able + to steal objects via the techniques described in the "SECURITY" + section of the linkgit:gitnamespaces[7] man page; it's best to + keep private data in a separate repository. + +uploadpack.allowAnySHA1InWant:: + Allow `upload-pack` to accept a fetch request that asks for any + object at all. + Defaults to `false`. + +uploadpack.keepAlive:: + When `upload-pack` has started `pack-objects`, there may be a + quiet period while `pack-objects` prepares the pack. Normally + it would output progress information, but if `--quiet` was used + for the fetch, `pack-objects` will output nothing at all until + the pack data begins. Some clients and networks may consider + the server to be hung and give up. Setting this option instructs + `upload-pack` to send an empty keepalive packet every + `uploadpack.keepAlive` seconds. Setting this option to 0 + disables keepalive packets entirely. The default is 5 seconds. + +uploadpack.packObjectsHook:: + If this option is set, when `upload-pack` would run + `git pack-objects` to create a packfile for a client, it will + run this shell command instead. The `pack-objects` command and + arguments it _would_ have run (including the `git pack-objects` + at the beginning) are appended to the shell command. The stdin + and stdout of the hook are treated as if `pack-objects` itself + was run. I.e., `upload-pack` will feed input intended for + `pack-objects` to the hook, and expects a completed packfile on + stdout. ++ +Note that this configuration variable is ignored if it is seen in the +repository-level config (this is a safety measure against fetching from +untrusted repositories). + +uploadpack.allowFilter:: + If this option is set, `upload-pack` will support partial + clone and partial fetch object filtering. + +uploadpack.allowRefInWant:: + If this option is set, `upload-pack` will support the `ref-in-want` + feature of the protocol version 2 `fetch` command. This feature + is intended for the benefit of load-balanced servers which may + not have the same view of what OIDs their refs point to due to + replication delay. diff --git a/Documentation/config/url.txt b/Documentation/config/url.txt new file mode 100644 index 0000000000..e5566c371d --- /dev/null +++ b/Documentation/config/url.txt @@ -0,0 +1,30 @@ +url.<base>.insteadOf:: + Any URL that starts with this value will be rewritten to + start, instead, with <base>. In cases where some site serves a + large number of repositories, and serves them with multiple + access methods, and some users need to use different access + methods, this feature allows people to specify any of the + equivalent URLs and have Git automatically rewrite the URL to + the best alternative for the particular user, even for a + never-before-seen repository on the site. When more than one + insteadOf strings match a given URL, the longest match is used. ++ +Note that any protocol restrictions will be applied to the rewritten +URL. If the rewrite changes the URL to use a custom protocol or remote +helper, you may need to adjust the `protocol.*.allow` config to permit +the request. In particular, protocols you expect to use for submodules +must be set to `always` rather than the default of `user`. See the +description of `protocol.allow` above. + +url.<base>.pushInsteadOf:: + Any URL that starts with this value will not be pushed to; + instead, it will be rewritten to start with <base>, and the + resulting URL will be pushed to. In cases where some site serves + a large number of repositories, and serves them with multiple + access methods, some of which do not allow push, this feature + allows people to specify a pull-only URL and have Git + automatically use an appropriate URL to push, even for a + never-before-seen repository on the site. When more than one + pushInsteadOf strings match a given URL, the longest match is + used. If a remote has an explicit pushurl, Git will ignore this + setting for that remote. diff --git a/Documentation/config/user.txt b/Documentation/config/user.txt new file mode 100644 index 0000000000..b5b2ba1199 --- /dev/null +++ b/Documentation/config/user.txt @@ -0,0 +1,26 @@ +user.email:: + Your email address to be recorded in any newly created commits. + Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and + `EMAIL` environment variables. See linkgit:git-commit-tree[1]. + +user.name:: + Your full name to be recorded in any newly created commits. + Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME` + environment variables. See linkgit:git-commit-tree[1]. + +user.useConfigOnly:: + Instruct Git to avoid trying to guess defaults for `user.email` + and `user.name`, and instead retrieve the values only from the + configuration. For example, if you have multiple email addresses + and would like to use a different one for each repository, then + with this configuration option set to `true` in the global config + along with a name, Git will prompt you to set up an email before + making new commits in a newly cloned repository. + Defaults to `false`. + +user.signingKey:: + If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the + key you want it to automatically when creating a signed tag or + commit, you can override the default selection with this variable. + This option is passed unchanged to gpg's --local-user parameter, + so you may specify a key using any method that gpg supports. diff --git a/Documentation/config/versionsort.txt b/Documentation/config/versionsort.txt new file mode 100644 index 0000000000..6c7cc054fa --- /dev/null +++ b/Documentation/config/versionsort.txt @@ -0,0 +1,33 @@ +versionsort.prereleaseSuffix (deprecated):: + Deprecated alias for `versionsort.suffix`. Ignored if + `versionsort.suffix` is set. + +versionsort.suffix:: + Even when version sort is used in linkgit:git-tag[1], tagnames + with the same base version but different suffixes are still sorted + lexicographically, resulting e.g. in prerelease tags appearing + after the main release (e.g. "1.0-rc1" after "1.0"). This + variable can be specified to determine the sorting order of tags + with different suffixes. ++ +By specifying a single suffix in this variable, any tagname containing +that suffix will appear before the corresponding main release. E.g. if +the variable is set to "-rc", then all "1.0-rcX" tags will appear before +"1.0". If specified multiple times, once per suffix, then the order of +suffixes in the configuration will determine the sorting order of tagnames +with those suffixes. E.g. if "-pre" appears before "-rc" in the +configuration, then all "1.0-preX" tags will be listed before any +"1.0-rcX" tags. The placement of the main release tag relative to tags +with various suffixes can be determined by specifying the empty suffix +among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and +"-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags +are listed first, followed by "v4.8", then "v4.8-ckX" and finally +"v4.8-bfsX". ++ +If more than one suffixes match the same tagname, then that tagname will +be sorted according to the suffix which starts at the earliest position in +the tagname. If more than one different matching suffixes start at +that earliest position, then that tagname will be sorted according to the +longest of those suffixes. +The sorting order between different suffixes is undefined if they are +in multiple config files. diff --git a/Documentation/config/web.txt b/Documentation/config/web.txt new file mode 100644 index 0000000000..beec8d1303 --- /dev/null +++ b/Documentation/config/web.txt @@ -0,0 +1,4 @@ +web.browser:: + Specify a web browser that may be used by some commands. + Currently only linkgit:git-instaweb[1] and linkgit:git-help[1] + may use it. diff --git a/Documentation/config/worktree.txt b/Documentation/config/worktree.txt new file mode 100644 index 0000000000..b853798fc2 --- /dev/null +++ b/Documentation/config/worktree.txt @@ -0,0 +1,9 @@ +worktree.guessRemote:: + With `add`, if no branch argument, and neither of `-b` nor + `-B` nor `--detach` are given, the command defaults to + creating a new branch from HEAD. If `worktree.guessRemote` is + set to true, `worktree add` tries to find a remote-tracking + branch whose name uniquely matches the new branch name. If + such a branch exists, it is checked out and set as "upstream" + for the new branch. If no such match can be found, it falls + back to creating a new branch from the current HEAD. diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 5e87d82933..1bfe9f56a7 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -45,13 +45,15 @@ unset an existing `--type` specifier with `--no-type`. When reading, the values are read from the system, global and repository local configuration files by default, and options -`--system`, `--global`, `--local` and `--file <filename>` can be -used to tell the command to read from only that location (see <<FILES>>). +`--system`, `--global`, `--local`, `--worktree` and +`--file <filename>` can be used to tell the command to read from only +that location (see <<FILES>>). When writing, the new value is written to the repository local configuration file by default, and options `--system`, `--global`, -`--file <filename>` can be used to tell the command to write to -that location (you can say `--local` but that is the default). +`--worktree`, `--file <filename>` can be used to tell the command to +write to that location (you can say `--local` but that is the +default). This command will fail with non-zero status upon error. Some exit codes are: @@ -131,6 +133,11 @@ from all available files. + See also <<FILES>>. +--worktree:: + Similar to `--local` except that `.git/config.worktree` is + read from or written to if `extensions.worktreeConfig` is + present. If not it's the same as `--local`. + -f config-file:: --file config-file:: Use the given config file instead of the one specified by GIT_CONFIG. @@ -281,6 +288,10 @@ $XDG_CONFIG_HOME/git/config:: $GIT_DIR/config:: Repository specific configuration file. +$GIT_DIR/config.worktree:: + This is optional and is only searched when + `extensions.worktreeConfig` is present in $GIT_DIR/config. + If no further options are given, all reading options will read all of these files that are available. If the global or the system-wide configuration file are not available they will be ignored. If the repository configuration @@ -299,9 +310,10 @@ configuration file. Note that this also affects options like `--replace-all` and `--unset`. *'git config' will only ever change one file at a time*. You can override these rules either by command-line options or by environment -variables. The `--global` and the `--system` options will limit the file used -to the global or system-wide file respectively. The `GIT_CONFIG` environment -variable has a similar effect, but you can specify any filename you want. +variables. The `--global`, `--system` and `--worktree` options will limit +the file used to the global, system-wide or per-worktree file respectively. +The `GIT_CONFIG` environment variable has a similar effect, but you +can specify any filename you want. ENVIRONMENT diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt index 423b6e033b..6793d8fc05 100644 --- a/Documentation/git-fmt-merge-msg.txt +++ b/Documentation/git-fmt-merge-msg.txt @@ -51,7 +51,7 @@ OPTIONS CONFIGURATION ------------- -include::fmt-merge-msg-config.txt[] +include::config/fmt-merge-msg.txt[] merge.summary:: Synonym to `merge.log`; this is deprecated and will be removed in diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index 7b157441eb..65b53fcc47 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -57,50 +57,7 @@ to appropriate values. Variables ~~~~~~~~~ -imap.folder:: - The folder to drop the mails into, which is typically the Drafts - folder. For example: "INBOX.Drafts", "INBOX/Drafts" or - "[Gmail]/Drafts". Required. - -imap.tunnel:: - Command used to setup a tunnel to the IMAP server through which - commands will be piped instead of using a direct network connection - to the server. Required when imap.host is not set. - -imap.host:: - A URL identifying the server. Use an `imap://` prefix for non-secure - connections and an `imaps://` prefix for secure connections. - Ignored when imap.tunnel is set, but required otherwise. - -imap.user:: - The username to use when logging in to the server. - -imap.pass:: - The password to use when logging in to the server. - -imap.port:: - An integer port number to connect to on the server. - Defaults to 143 for imap:// hosts and 993 for imaps:// hosts. - Ignored when imap.tunnel is set. - -imap.sslverify:: - A boolean to enable/disable verification of the server certificate - used by the SSL/TLS connection. Default is `true`. Ignored when - imap.tunnel is set. - -imap.preformattedHTML:: - A boolean to enable/disable the use of html encoding when sending - a patch. An html encoded patch will be bracketed with <pre> - and have a content type of text/html. Ironically, enabling this - option causes Thunderbird to send the patch as a plain/text, - format=fixed email. Default is `false`. - -imap.authMethod:: - Specify authenticate method for authentication with IMAP server. - If Git was built with the NO_CURL option, or if your curl version is older - than 7.34.0, or if you're running git-imap-send with the `--no-curl` - option, the only supported method is 'CRAM-MD5'. If this is not set - then 'git imap-send' uses the basic IMAP plaintext LOGIN command. +include::config/imap.txt[] Examples ~~~~~~~~ diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index eb36837f86..4cc86469f3 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -342,7 +342,7 @@ include::merge-strategies.txt[] CONFIGURATION ------------- -include::merge-config.txt[] +include::config/merge.txt[] branch.<name>.mergeOptions:: Sets default options for merging into branch <name>. The syntax and diff --git a/Documentation/git-range-diff.txt b/Documentation/git-range-diff.txt index f693930fdb..8a6ea2c6c5 100644 --- a/Documentation/git-range-diff.txt +++ b/Documentation/git-range-diff.txt @@ -78,6 +78,23 @@ between patches", i.e. to compare the author, commit message and diff of corresponding old/new commits. There is currently no means to tweak the diff options passed to `git log` when generating those patches. +OUTPUT STABILITY +---------------- + +The output of the `range-diff` command is subject to change. It is +intended to be human-readable porcelain output, not something that can +be used across versions of Git to get a textually stable `range-diff` +(as opposed to something like the `--stable` option to +linkgit:git-patch-id[1]). There's also no equivalent of +linkgit:git-apply[1] for `range-diff`, the output is not intended to +be machine-readable. + +This is particularly true when passing in diff options. Currently some +options like `--stat` can, as an emergent effect, produce output +that's quite useless in the context of `range-diff`. Future versions +of `range-diff` may learn to interpret such options in a manner +specific to `range-diff` (e.g. for `--stat` producing human-readable +output which summarizes how the diffstat changed). CONFIGURATION ------------- diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 3407d835bd..80793bad8d 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -203,7 +203,7 @@ Alternatively, you can undo the 'git rebase' with CONFIGURATION ------------- -include::rebase-config.txt[] +include::config/rebase.txt[] OPTIONS ------- diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index 472a6808cd..ff487ff77d 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -20,7 +20,7 @@ depending on the subcommand: 'git reflog' ['show'] [log-options] [<ref>] 'git reflog expire' [--expire=<time>] [--expire-unreachable=<time>] [--rewrite] [--updateref] [--stale-fix] - [--dry-run | -n] [--verbose] [--all | <refs>...] + [--dry-run | -n] [--verbose] [--all [--single-worktree] | <refs>...] 'git reflog delete' [--rewrite] [--updateref] [--dry-run | -n] [--verbose] ref@\{specifier\}... 'git reflog exists' <ref> @@ -72,6 +72,11 @@ Options for `expire` --all:: Process the reflogs of all references. +--single-worktree:: + By default when `--all` is specified, reflogs from all working + trees are processed. This option limits the processing to reflogs + from the current working tree only. + --expire=<time>:: Prune entries older than the specified time. If this option is not specified, the expiration time is taken from the diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 1d697d9962..2dac95c71a 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -95,7 +95,10 @@ OPTIONS -q:: --quiet:: - Be quiet, only report errors. +--no-quiet:: + Be quiet, only report errors. The default behavior is set by the + `reset.quiet` config option. `--quiet` and `--no-quiet` will + override the default behavior. EXAMPLES diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index 73520434f6..cb86318f3e 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -204,6 +204,65 @@ working trees, it can be used to identify worktrees. For example if you only have two working trees, at "/abc/def/ghi" and "/abc/def/ggg", then "ghi" or "def/ghi" is enough to point to the former working tree. +REFS +---- +In multiple working trees, some refs may be shared between all working +trees, some refs are local. One example is HEAD is different for all +working trees. This section is about the sharing rules and how to access +refs of one working tree from another. + +In general, all pseudo refs are per working tree and all refs starting +with "refs/" are shared. Pseudo refs are ones like HEAD which are +directly under GIT_DIR instead of inside GIT_DIR/refs. There are one +exception to this: refs inside refs/bisect and refs/worktree is not +shared. + +Refs that are per working tree can still be accessed from another +working tree via two special paths, main-worktree and worktrees. The +former gives access to per-worktree refs of the main working tree, +while the latter to all linked working trees. + +For example, main-worktree/HEAD or main-worktree/refs/bisect/good +resolve to the same value as the main working tree's HEAD and +refs/bisect/good respectively. Similarly, worktrees/foo/HEAD or +worktrees/bar/refs/bisect/bad are the same as +GIT_COMMON_DIR/worktrees/foo/HEAD and +GIT_COMMON_DIR/worktrees/bar/refs/bisect/bad. + +To access refs, it's best not to look inside GIT_DIR directly. Instead +use commands such as linkgit:git-rev-parse[1] or linkgit:git-update-ref[1] +which will handle refs correctly. + +CONFIGURATION FILE +------------------ +By default, the repository "config" file is shared across all working +trees. If the config variables `core.bare` or `core.worktree` are +already present in the config file, they will be applied to the main +working trees only. + +In order to have configuration specific to working trees, you can turn +on "worktreeConfig" extension, e.g.: + +------------ +$ git config extensions.worktreeConfig true +------------ + +In this mode, specific configuration stays in the path pointed by `git +rev-parse --git-path config.worktree`. You can add or update +configuration in this file with `git config --worktree`. Older Git +versions will refuse to access repositories with this extension. + +Note that in this file, the exception for `core.bare` and `core.worktree` +is gone. If you have them in $GIT_DIR/config before, you must move +them to the `config.worktree` of the main working tree. You may also +take this opportunity to review and move other configuration that you +do not want to share to all working trees: + + - `core.worktree` and `core.bare` should never be shared + + - `core.sparseCheckout` is recommended per working tree, unless you + are sure you always use sparse checkout for all working trees. + DETAILS ------- Each linked working tree has a private sub-directory in the repository's @@ -228,7 +287,8 @@ linked working tree `git rev-parse --git-path HEAD` returns `/path/other/test-next/.git/HEAD` or `/path/main/.git/HEAD`) while `git rev-parse --git-path refs/heads/master` uses $GIT_COMMON_DIR and returns `/path/main/.git/refs/heads/master`, -since refs are shared across all working trees. +since refs are shared across all working trees, except refs/bisect and +refs/worktree. See linkgit:gitrepository-layout[5] for more information. The rule of thumb is do not make any assumption about whether a path belongs to @@ -253,6 +313,9 @@ to `/path/main/.git/worktrees/test-next` then a file named `test-next` entry from being pruned. See linkgit:gitrepository-layout[5] for details. +When extensions.worktreeConfig is enabled, the config file +`.git/worktrees/<id>/config.worktree` is read after `.git/config` is. + LIST OUTPUT FORMAT ------------------ The worktree list command has two output formats. The default format shows the diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index d107daaffd..1c94f08ff4 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -129,7 +129,8 @@ full pathname may have special meaning: matches zero or more directories. For example, "`a/**/b`" matches "`a/b`", "`a/x/b`", "`a/x/y/b`" and so on. - - Other consecutive asterisks are considered invalid. + - Other consecutive asterisks are considered regular asterisks and + will match according to the previous rules. NOTES ----- diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index e85148f05e..d501af9d77 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -95,8 +95,10 @@ refs:: References are stored in subdirectories of this directory. The 'git prune' command knows to preserve objects reachable from refs found in this directory and - its subdirectories. This directory is ignored if $GIT_COMMON_DIR - is set and "$GIT_COMMON_DIR/refs" will be used instead. + its subdirectories. + This directory is ignored (except refs/bisect and + refs/worktree) if $GIT_COMMON_DIR is set and + "$GIT_COMMON_DIR/refs" will be used instead. refs/heads/`name`:: records tip-of-the-tree commit objects of branch `name` @@ -143,6 +145,11 @@ config:: if $GIT_COMMON_DIR is set and "$GIT_COMMON_DIR/config" will be used instead. +config.worktree:: + Working directory specific configuration file for the main + working directory in multiple working directory setup (see + linkgit:git-worktree[1]). + branches:: A slightly deprecated way to store shorthands to be used to specify a URL to 'git fetch', 'git pull' and 'git push'. @@ -165,6 +172,11 @@ hooks:: each hook. This directory is ignored if $GIT_COMMON_DIR is set and "$GIT_COMMON_DIR/hooks" will be used instead. +common:: + When multiple working trees are used, most of files in + $GIT_DIR are per-worktree with a few known exceptions. All + files under 'common' however will be shared between all + working trees. index:: The current index file for the repository. It is @@ -275,6 +287,9 @@ worktrees/<id>/locked:: or manually by `git worktree prune`. The file may contain a string explaining why the repository is locked. +worktrees/<id>/config.worktree:: + Working directory specific configuration file. + SEE ALSO -------- linkgit:git-init[1], diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 829b558110..2b036d7838 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -183,10 +183,6 @@ There are some macros to easily define options: scale the provided value by 1024, 1024^2 or 1024^3 respectively. The scaled value is put into `unsigned_long_var`. -`OPT_DATE(short, long, ×tamp_t_var, description)`:: - Introduce an option with date argument, see `approxidate()`. - The timestamp is put into `timestamp_t_var`. - `OPT_EXPIRY_DATE(short, long, ×tamp_t_var, description)`:: Introduce an option with expiry date argument, see `parse_expiry_date()`. The timestamp is put into `timestamp_t_var`. @@ -59,6 +59,13 @@ all:: # Define CURL_CONFIG to curl's configuration program that prints information # about the library (e.g., its version number). The default is 'curl-config'. # +# Define CURL_LDFLAGS to specify flags that you need to link when using libcurl, +# if you do not want to rely on the libraries provided by CURL_CONFIG. The +# default value is a result of `curl-config --libs`. An example value for +# CURL_LDFLAGS is as follows: +# +# CURL_LDFLAGS=-lcurl +# # Define NO_EXPAT if you do not have expat installed. git-http-push is # not built, and you cannot push using http:// and https:// transports (dumb). # @@ -183,10 +190,6 @@ all:: # # Define NEEDS_SSL_WITH_CRYPTO if you need -lssl when using -lcrypto (Darwin). # -# Define NEEDS_SSL_WITH_CURL if you need -lssl with -lcurl (Minix). -# -# Define NEEDS_IDN_WITH_CURL if you need -lidn when using -lcurl (Minix). -# # Define NEEDS_LIBICONV if linking with libc is not enough (Darwin). # # Define NEEDS_LIBINTL_BEFORE_LIBICONV if you need libintl before libiconv. @@ -751,6 +754,7 @@ TEST_BUILTINS_OBJS += test-sigchain.o TEST_BUILTINS_OBJS += test-strcmp-offset.o TEST_BUILTINS_OBJS += test-string-list.o TEST_BUILTINS_OBJS += test-submodule-config.o +TEST_BUILTINS_OBJS += test-submodule-nested-repo-config.o TEST_BUILTINS_OBJS += test-subprocess.o TEST_BUILTINS_OBJS += test-urlmatch-normalization.o TEST_BUILTINS_OBJS += test-wildmatch.o @@ -992,6 +996,7 @@ LIB_OBJS += sub-process.o LIB_OBJS += symlinks.o LIB_OBJS += tag.o LIB_OBJS += tempfile.o +LIB_OBJS += thread-utils.o LIB_OBJS += tmp-objdir.o LIB_OBJS += trace.o LIB_OBJS += trailer.o @@ -1307,20 +1312,17 @@ else ifdef CURLDIR # Try "-Wl,-rpath=$(CURLDIR)/$(lib)" in such a case. BASIC_CFLAGS += -I$(CURLDIR)/include - CURL_LIBCURL = -L$(CURLDIR)/$(lib) $(CC_LD_DYNPATH)$(CURLDIR)/$(lib) -lcurl + CURL_LIBCURL = -L$(CURLDIR)/$(lib) $(CC_LD_DYNPATH)$(CURLDIR)/$(lib) else - CURL_LIBCURL = -lcurl - endif - ifdef NEEDS_SSL_WITH_CURL - CURL_LIBCURL += -lssl - ifdef NEEDS_CRYPTO_WITH_SSL - CURL_LIBCURL += -lcrypto - endif - endif - ifdef NEEDS_IDN_WITH_CURL - CURL_LIBCURL += -lidn + CURL_LIBCURL = endif +ifdef CURL_LDFLAGS + CURL_LIBCURL += $(CURL_LDFLAGS) +else + CURL_LIBCURL += $(shell $(CURL_CONFIG) --libs) +endif + REMOTE_CURL_PRIMARY = git-remote-http$X REMOTE_CURL_ALIASES = git-remote-https$X git-remote-ftp$X git-remote-ftps$X REMOTE_CURL_NAMES = $(REMOTE_CURL_PRIMARY) $(REMOTE_CURL_ALIASES) @@ -1676,7 +1678,6 @@ ifdef NO_PTHREADS else BASIC_CFLAGS += $(PTHREAD_CFLAGS) EXTLIBS += $(PTHREAD_LIBS) - LIB_OBJS += thread-utils.o endif ifdef HAVE_PATHS_H @@ -2070,7 +2071,7 @@ $(BUILT_INS): git$X command-list.h: generate-cmdlist.sh command-list.txt -command-list.h: $(wildcard Documentation/git*.txt) Documentation/*config.txt +command-list.h: $(wildcard Documentation/git*.txt) Documentation/*config.txt Documentation/config/*.txt $(QUIET_GEN)$(SHELL_PATH) ./generate-cmdlist.sh command-list.txt >$@+ && mv $@+ $@ SCRIPT_DEFINES = $(SHELL_PATH_SQ):$(DIFF_SQ):$(GIT_VERSION):\ @@ -2110,7 +2111,7 @@ $(SCRIPT_LIB) : % : %.sh GIT-SCRIPT-DEFINES $(QUIET_GEN)$(cmd_munge_script) && \ mv $@+ $@ -git.res: git.rc GIT-VERSION-FILE +git.res: git.rc GIT-VERSION-FILE GIT-PREFIX $(QUIET_RC)$(RC) \ $(join -DMAJOR= -DMINOR= -DMICRO= -DPATCHLEVEL=, $(wordlist 1, 4, \ $(shell echo $(GIT_VERSION) 0 0 0 0 | tr '.a-zA-Z-' ' '))) \ @@ -12,6 +12,7 @@ int advice_push_needs_force = 1; int advice_status_hints = 1; int advice_status_u_option = 1; int advice_commit_before_merge = 1; +int advice_reset_quiet_warning = 1; int advice_resolve_conflict = 1; int advice_implicit_identity = 1; int advice_detached_head = 1; @@ -65,6 +66,7 @@ static struct { { "statusHints", &advice_status_hints }, { "statusUoption", &advice_status_u_option }, { "commitBeforeMerge", &advice_commit_before_merge }, + { "resetQuiet", &advice_reset_quiet_warning }, { "resolveConflict", &advice_resolve_conflict }, { "implicitIdentity", &advice_implicit_identity }, { "detachedHead", &advice_detached_head }, @@ -12,6 +12,7 @@ extern int advice_push_needs_force; extern int advice_status_hints; extern int advice_status_u_option; extern int advice_commit_before_merge; +extern int advice_reset_quiet_warning; extern int advice_resolve_conflict; extern int advice_implicit_identity; extern int advice_detached_head; @@ -1748,7 +1748,7 @@ static int parse_fragment(struct apply_state *state, } if (oldlines || newlines) return -1; - if (!deleted && !added) + if (!patch->recount && !deleted && !added) return -1; fragment->leading = leading; @@ -4772,6 +4772,9 @@ static int apply_option_parse_exclude(const struct option *opt, const char *arg, int unset) { struct apply_state *state = opt->value; + + BUG_ON_OPT_NEG(unset); + add_name_limit(state, arg, 1); return 0; } @@ -4780,6 +4783,9 @@ static int apply_option_parse_include(const struct option *opt, const char *arg, int unset) { struct apply_state *state = opt->value; + + BUG_ON_OPT_NEG(unset); + add_name_limit(state, arg, 0); state->has_include = 1; return 0; @@ -4790,6 +4796,9 @@ static int apply_option_parse_p(const struct option *opt, int unset) { struct apply_state *state = opt->value; + + BUG_ON_OPT_NEG(unset); + state->p_value = atoi(arg); state->p_value_known = 1; return 0; @@ -4799,6 +4808,9 @@ static int apply_option_parse_space_change(const struct option *opt, const char *arg, int unset) { struct apply_state *state = opt->value; + + BUG_ON_OPT_ARG(arg); + if (unset) state->ws_ignore_action = ignore_ws_none; else @@ -4810,9 +4822,12 @@ static int apply_option_parse_whitespace(const struct option *opt, const char *arg, int unset) { struct apply_state *state = opt->value; + + BUG_ON_OPT_NEG(unset); + state->whitespace_option = arg; if (parse_whitespace_option(state, arg)) - exit(1); + return -1; return 0; } @@ -4820,6 +4835,9 @@ static int apply_option_parse_directory(const struct option *opt, const char *arg, int unset) { struct apply_state *state = opt->value; + + BUG_ON_OPT_NEG(unset); + strbuf_reset(&state->root); strbuf_addstr(&state->root, arg); strbuf_complete(&state->root, '/'); @@ -4939,10 +4957,10 @@ int apply_parse_options(int argc, const char **argv, struct option builtin_apply_options[] = { { OPTION_CALLBACK, 0, "exclude", state, N_("path"), N_("don't apply changes matching the given path"), - 0, apply_option_parse_exclude }, + PARSE_OPT_NONEG, apply_option_parse_exclude }, { OPTION_CALLBACK, 0, "include", state, N_("path"), N_("apply changes matching the given path"), - 0, apply_option_parse_include }, + PARSE_OPT_NONEG, apply_option_parse_include }, { OPTION_CALLBACK, 'p', NULL, state, N_("num"), N_("remove <num> leading slashes from traditional diff paths"), 0, apply_option_parse_p }, @@ -41,23 +41,17 @@ const char *git_attr_name(const struct git_attr *attr) struct attr_hashmap { struct hashmap map; -#ifndef NO_PTHREADS pthread_mutex_t mutex; -#endif }; static inline void hashmap_lock(struct attr_hashmap *map) { -#ifndef NO_PTHREADS pthread_mutex_lock(&map->mutex); -#endif } static inline void hashmap_unlock(struct attr_hashmap *map) { -#ifndef NO_PTHREADS pthread_mutex_unlock(&map->mutex); -#endif } /* @@ -498,23 +492,17 @@ static struct check_vector { size_t nr; size_t alloc; struct attr_check **checks; -#ifndef NO_PTHREADS pthread_mutex_t mutex; -#endif } check_vector; static inline void vector_lock(void) { -#ifndef NO_PTHREADS pthread_mutex_lock(&check_vector.mutex); -#endif } static inline void vector_unlock(void) { -#ifndef NO_PTHREADS pthread_mutex_unlock(&check_vector.mutex); -#endif } static void check_vector_add(struct attr_check *c) @@ -1181,8 +1169,6 @@ void git_all_attrs(const struct index_state *istate, void attr_start(void) { -#ifndef NO_PTHREADS pthread_mutex_init(&g_attr_hashmap.mutex, NULL); pthread_mutex_init(&check_vector.mutex, NULL); -#endif } diff --git a/builtin/add.c b/builtin/add.c index ad49806ebf..f65c172299 100644 --- a/builtin/add.c +++ b/builtin/add.c @@ -445,11 +445,6 @@ int cmd_add(int argc, const char **argv, const char *prefix) return 0; } - if (read_cache() < 0) - die(_("index file corrupt")); - - die_in_unpopulated_submodule(&the_index, prefix); - /* * Check the "pathspec '%s' did not match any files" block * below before enabling new magic. @@ -459,6 +454,10 @@ int cmd_add(int argc, const char **argv, const char *prefix) PATHSPEC_SYMLINK_LEADING_PATH, prefix, argv); + if (read_cache_preload(&pathspec) < 0) + die(_("index file corrupt")); + + die_in_unpopulated_submodule(&the_index, prefix); die_path_inside_submodule(&the_index, &pathspec); if (add_new_files) { diff --git a/builtin/am.c b/builtin/am.c index 3ee9a9d2a9..8f27f3375b 100644 --- a/builtin/am.c +++ b/builtin/am.c @@ -261,32 +261,6 @@ static int read_state_file(struct strbuf *sb, const struct am_state *state, } /** - * Take a series of KEY='VALUE' lines where VALUE part is - * sq-quoted, and append <KEY, VALUE> at the end of the string list - */ -static int parse_key_value_squoted(char *buf, struct string_list *list) -{ - while (*buf) { - struct string_list_item *item; - char *np; - char *cp = strchr(buf, '='); - if (!cp) - return -1; - np = strchrnul(cp, '\n'); - *cp++ = '\0'; - item = string_list_append(list, buf); - - buf = np + (*np == '\n'); - *np = '\0'; - cp = sq_dequote(cp); - if (!cp) - return -1; - item->util = xstrdup(cp); - } - return 0; -} - -/** * Reads and parses the state directory's "author-script" file, and sets * state->author_name, state->author_email and state->author_date accordingly. * Returns 0 on success, -1 if the file could not be parsed. @@ -302,42 +276,16 @@ static int parse_key_value_squoted(char *buf, struct string_list *list) * script, and thus if the file differs from what this function expects, it is * better to bail out than to do something that the user does not expect. */ -static int read_author_script(struct am_state *state) +static int read_am_author_script(struct am_state *state) { const char *filename = am_path(state, "author-script"); - struct strbuf buf = STRBUF_INIT; - struct string_list kv = STRING_LIST_INIT_DUP; - int retval = -1; /* assume failure */ - int fd; assert(!state->author_name); assert(!state->author_email); assert(!state->author_date); - fd = open(filename, O_RDONLY); - if (fd < 0) { - if (errno == ENOENT) - return 0; - die_errno(_("could not open '%s' for reading"), filename); - } - strbuf_read(&buf, fd, 0); - close(fd); - if (parse_key_value_squoted(buf.buf, &kv)) - goto finish; - - if (kv.nr != 3 || - strcmp(kv.items[0].string, "GIT_AUTHOR_NAME") || - strcmp(kv.items[1].string, "GIT_AUTHOR_EMAIL") || - strcmp(kv.items[2].string, "GIT_AUTHOR_DATE")) - goto finish; - state->author_name = kv.items[0].util; - state->author_email = kv.items[1].util; - state->author_date = kv.items[2].util; - retval = 0; -finish: - string_list_clear(&kv, !!retval); - strbuf_release(&buf); - return retval; + return read_author_script(filename, &state->author_name, + &state->author_email, &state->author_date, 1); } /** @@ -411,7 +359,7 @@ static void am_load(struct am_state *state) BUG("state file 'last' does not exist"); state->last = strtol(sb.buf, NULL, 10); - if (read_author_script(state) < 0) + if (read_am_author_script(state) < 0) die(_("could not parse author script")); read_commit_msg(state); @@ -2165,7 +2113,9 @@ static int parse_opt_patchformat(const struct option *opt, const char *arg, int { int *opt_value = opt->value; - if (!strcmp(arg, "mbox")) + if (unset) + *opt_value = PATCH_FORMAT_UNKNOWN; + else if (!strcmp(arg, "mbox")) *opt_value = PATCH_FORMAT_MBOX; else if (!strcmp(arg, "stgit")) *opt_value = PATCH_FORMAT_STGIT; diff --git a/builtin/blame.c b/builtin/blame.c index a443af9ee9..06a7163ffe 100644 --- a/builtin/blame.c +++ b/builtin/blame.c @@ -732,6 +732,8 @@ static int blame_copy_callback(const struct option *option, const char *arg, int { int *opt = option->value; + BUG_ON_OPT_NEG(unset); + /* * -C enables copy from removed files; * -C -C enables copy from existing files, but only @@ -754,6 +756,8 @@ static int blame_move_callback(const struct option *option, const char *arg, int { int *opt = option->value; + BUG_ON_OPT_NEG(unset); + *opt |= PICKAXE_BLAME_MOVE; if (arg) diff --git a/builtin/cat-file.c b/builtin/cat-file.c index 8d97c84725..657fe926e2 100644 --- a/builtin/cat-file.c +++ b/builtin/cat-file.c @@ -50,6 +50,13 @@ static int filter_object(const char *path, unsigned mode, return 0; } +static int stream_blob(const struct object_id *oid) +{ + if (stream_blob_to_fd(1, oid, NULL, 0)) + die("unable to stream %s to stdout", oid_to_hex(oid)); + return 0; +} + static int cat_one_file(int opt, const char *exp_type, const char *obj_name, int unknown_type) { @@ -132,7 +139,7 @@ static int cat_one_file(int opt, const char *exp_type, const char *obj_name, } if (type == OBJ_BLOB) - return stream_blob_to_fd(1, &oid, NULL, 0); + return stream_blob(&oid); buf = read_object_file(&oid, &type, &size); if (!buf) die("Cannot read object %s", obj_name); @@ -155,7 +162,7 @@ static int cat_one_file(int opt, const char *exp_type, const char *obj_name, oidcpy(&blob_oid, &oid); if (oid_object_info(the_repository, &blob_oid, NULL) == OBJ_BLOB) - return stream_blob_to_fd(1, &blob_oid, NULL, 0); + return stream_blob(&blob_oid); /* * we attempted to dereference a tag to a blob * and failed; there may be new dereference @@ -319,8 +326,9 @@ static void print_object_or_die(struct batch_options *opt, struct expand_data *d BUG("invalid cmdmode: %c", opt->cmdmode); batch_write(opt, contents, size); free(contents); - } else if (stream_blob_to_fd(1, oid, NULL, 0) < 0) - die("unable to stream %s to stdout", oid_to_hex(oid)); + } else { + stream_blob(oid); + } } else { enum object_type type; @@ -595,8 +603,10 @@ static int batch_option_callback(const struct option *opt, { struct batch_options *bo = opt->value; + BUG_ON_OPT_NEG(unset); + if (bo->enabled) { - return 1; + return error(_("only one batch option may be specified")); } bo->enabled = 1; @@ -631,10 +641,12 @@ int cmd_cat_file(int argc, const char **argv, const char *prefix) OPT_BOOL(0, "buffer", &batch.buffer_output, N_("buffer --batch output")), { OPTION_CALLBACK, 0, "batch", &batch, "format", N_("show info and content of objects fed from the standard input"), - PARSE_OPT_OPTARG, batch_option_callback }, + PARSE_OPT_OPTARG | PARSE_OPT_NONEG, + batch_option_callback }, { OPTION_CALLBACK, 0, "batch-check", &batch, "format", N_("show info about objects fed from the standard input"), - PARSE_OPT_OPTARG, batch_option_callback }, + PARSE_OPT_OPTARG | PARSE_OPT_NONEG, + batch_option_callback }, OPT_BOOL(0, "follow-symlinks", &batch.follow_symlinks, N_("follow in-tree symlinks (used with --batch or --batch-check)")), OPT_BOOL(0, "batch-all-objects", &batch.all_objects, diff --git a/builtin/checkout-index.c b/builtin/checkout-index.c index 88b86c8d9f..eb74774cbc 100644 --- a/builtin/checkout-index.c +++ b/builtin/checkout-index.c @@ -132,6 +132,8 @@ static const char * const builtin_checkout_index_usage[] = { static int option_parse_stage(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); + if (!strcmp(arg, "all")) { to_tempfile = 1; checkout_stage = CHECKOUT_ALL; diff --git a/builtin/clean.c b/builtin/clean.c index 8d9a7dc206..bbcdeb2d9e 100644 --- a/builtin/clean.c +++ b/builtin/clean.c @@ -140,6 +140,7 @@ static void clean_print_color(enum color_clean ix) static int exclude_cb(const struct option *opt, const char *arg, int unset) { struct string_list *exclude_list = opt->value; + BUG_ON_OPT_NEG(unset); string_list_append(exclude_list, arg); return 0; } diff --git a/builtin/commit.c b/builtin/commit.c index 074bd9a551..c021b119bb 100644 --- a/builtin/commit.c +++ b/builtin/commit.c @@ -161,6 +161,9 @@ static int opt_parse_m(const struct option *opt, const char *arg, int unset) static int opt_parse_rename_score(const struct option *opt, const char *arg, int unset) { const char **value = opt->value; + + BUG_ON_OPT_NEG(unset); + if (arg != NULL && *arg == '=') arg = arg + 1; @@ -1335,7 +1338,7 @@ int cmd_status(int argc, const char **argv, const char *prefix) OPT_BOOL(0, "no-renames", &no_renames, N_("do not detect renames")), { OPTION_CALLBACK, 'M', "find-renames", &rename_score_arg, N_("n"), N_("detect renames, optionally set similarity index"), - PARSE_OPT_OPTARG, opt_parse_rename_score }, + PARSE_OPT_OPTARG | PARSE_OPT_NONEG, opt_parse_rename_score }, OPT_END(), }; @@ -1363,7 +1366,7 @@ int cmd_status(int argc, const char **argv, const char *prefix) if (status_format != STATUS_FORMAT_PORCELAIN && status_format != STATUS_FORMAT_PORCELAIN_V2) progress_flag = REFRESH_PROGRESS; - read_index_preload(&the_index, &s.pathspec, progress_flag); + read_index(&the_index); refresh_index(&the_index, REFRESH_QUIET|REFRESH_UNMERGED|progress_flag, &s.pathspec, NULL, NULL); diff --git a/builtin/config.c b/builtin/config.c index 97b58c4aea..84385ef165 100644 --- a/builtin/config.c +++ b/builtin/config.c @@ -5,6 +5,7 @@ #include "parse-options.h" #include "urlmatch.h" #include "quote.h" +#include "worktree.h" static const char *const builtin_config_usage[] = { N_("git config [<options>]"), @@ -24,6 +25,7 @@ static char key_delim = ' '; static char term = '\n'; static int use_global_config, use_system_config, use_local_config; +static int use_worktree_config; static struct git_config_source given_config_source; static int actions, type; static char *default_value; @@ -123,6 +125,7 @@ static struct option builtin_config_options[] = { OPT_BOOL(0, "global", &use_global_config, N_("use global config file")), OPT_BOOL(0, "system", &use_system_config, N_("use system config file")), OPT_BOOL(0, "local", &use_local_config, N_("use repository config file")), + OPT_BOOL(0, "worktree", &use_worktree_config, N_("use per-worktree config file")), OPT_STRING('f', "file", &given_config_source.file, N_("file"), N_("use given config file")), OPT_STRING(0, "blob", &given_config_source.blob, N_("blob-id"), N_("read config from given blob object")), OPT_GROUP(N_("Action")), @@ -602,6 +605,7 @@ int cmd_config(int argc, const char **argv, const char *prefix) PARSE_OPT_STOP_AT_NON_OPTION); if (use_global_config + use_system_config + use_local_config + + use_worktree_config + !!given_config_source.file + !!given_config_source.blob > 1) { error(_("only one config file at a time")); usage_builtin_config(); @@ -645,7 +649,20 @@ int cmd_config(int argc, const char **argv, const char *prefix) given_config_source.file = git_etc_gitconfig(); else if (use_local_config) given_config_source.file = git_pathdup("config"); - else if (given_config_source.file) { + else if (use_worktree_config) { + struct worktree **worktrees = get_worktrees(0); + if (repository_format_worktree_config) + given_config_source.file = git_pathdup("config.worktree"); + else if (worktrees[0] && worktrees[1]) + die(_("--worktree cannot be used with multiple " + "working trees unless the config\n" + "extension worktreeConfig is enabled. " + "Please read \"CONFIGURATION FILE\"\n" + "section in \"git help worktree\" for details")); + else + given_config_source.file = git_pathdup("config"); + free_worktrees(worktrees); + } else if (given_config_source.file) { if (!is_absolute_path(given_config_source.file) && prefix) given_config_source.file = prefix_filename(prefix, given_config_source.file); diff --git a/builtin/describe.c b/builtin/describe.c index c48c34e866..cc118448ee 100644 --- a/builtin/describe.c +++ b/builtin/describe.c @@ -629,7 +629,7 @@ int cmd_describe(int argc, const char **argv, const char *prefix) struct argv_array args = ARGV_ARRAY_INIT; int fd, result; - read_cache_preload(NULL); + read_cache(); refresh_index(&the_index, REFRESH_QUIET|REFRESH_UNMERGED, NULL, NULL, NULL); fd = hold_locked_index(&index_lock, 0); diff --git a/builtin/fetch.c b/builtin/fetch.c index 8f7249f2b1..e0140327aa 100644 --- a/builtin/fetch.c +++ b/builtin/fetch.c @@ -98,6 +98,8 @@ static int git_fetch_config(const char *k, const char *v, void *cb) static int parse_refmap_arg(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); + /* * "git fetch --refmap='' origin foo" * can be used to tell the command not to store anywhere @@ -223,18 +225,6 @@ static void add_merge_config(struct ref **head, } } -static int add_existing(const char *refname, const struct object_id *oid, - int flag, void *cbdata) -{ - struct string_list *list = (struct string_list *)cbdata; - struct string_list_item *item = string_list_insert(list, refname); - struct object_id *old_oid = xmalloc(sizeof(*old_oid)); - - oidcpy(old_oid, oid); - item->util = old_oid; - return 0; -} - static int will_fetch(struct ref **head, const unsigned char *sha1) { struct ref *rm = *head; @@ -246,16 +236,72 @@ static int will_fetch(struct ref **head, const unsigned char *sha1) return 0; } +struct refname_hash_entry { + struct hashmap_entry ent; /* must be the first member */ + struct object_id oid; + char refname[FLEX_ARRAY]; +}; + +static int refname_hash_entry_cmp(const void *hashmap_cmp_fn_data, + const void *e1_, + const void *e2_, + const void *keydata) +{ + const struct refname_hash_entry *e1 = e1_; + const struct refname_hash_entry *e2 = e2_; + + return strcmp(e1->refname, keydata ? keydata : e2->refname); +} + +static struct refname_hash_entry *refname_hash_add(struct hashmap *map, + const char *refname, + const struct object_id *oid) +{ + struct refname_hash_entry *ent; + size_t len = strlen(refname); + + FLEX_ALLOC_MEM(ent, refname, refname, len); + hashmap_entry_init(ent, strhash(refname)); + oidcpy(&ent->oid, oid); + hashmap_add(map, ent); + return ent; +} + +static int add_one_refname(const char *refname, + const struct object_id *oid, + int flag, void *cbdata) +{ + struct hashmap *refname_map = cbdata; + + (void) refname_hash_add(refname_map, refname, oid); + return 0; +} + +static void refname_hash_init(struct hashmap *map) +{ + hashmap_init(map, refname_hash_entry_cmp, NULL, 0); +} + +static int refname_hash_exists(struct hashmap *map, const char *refname) +{ + return !!hashmap_get_from_hash(map, strhash(refname), refname); +} + static void find_non_local_tags(const struct ref *refs, struct ref **head, struct ref ***tail) { - struct string_list existing_refs = STRING_LIST_INIT_DUP; - struct string_list remote_refs = STRING_LIST_INIT_NODUP; + struct hashmap existing_refs; + struct hashmap remote_refs; + struct string_list remote_refs_list = STRING_LIST_INIT_NODUP; + struct string_list_item *remote_ref_item; const struct ref *ref; - struct string_list_item *item = NULL; + struct refname_hash_entry *item = NULL; - for_each_ref(add_existing, &existing_refs); + refname_hash_init(&existing_refs); + refname_hash_init(&remote_refs); + + for_each_ref(add_one_refname, &existing_refs); for (ref = refs; ref; ref = ref->next) { if (!starts_with(ref->name, "refs/tags/")) continue; @@ -271,10 +317,10 @@ static void find_non_local_tags(const struct ref *refs, !has_object_file_with_flags(&ref->old_oid, OBJECT_INFO_QUICK) && !will_fetch(head, ref->old_oid.hash) && - !has_sha1_file_with_flags(item->util, + !has_sha1_file_with_flags(item->oid.hash, OBJECT_INFO_QUICK) && - !will_fetch(head, item->util)) - item->util = NULL; + !will_fetch(head, item->oid.hash)) + oidclr(&item->oid); item = NULL; continue; } @@ -286,48 +332,53 @@ static void find_non_local_tags(const struct ref *refs, * fetch. */ if (item && - !has_sha1_file_with_flags(item->util, OBJECT_INFO_QUICK) && - !will_fetch(head, item->util)) - item->util = NULL; + !has_sha1_file_with_flags(item->oid.hash, OBJECT_INFO_QUICK) && + !will_fetch(head, item->oid.hash)) + oidclr(&item->oid); item = NULL; /* skip duplicates and refs that we already have */ - if (string_list_has_string(&remote_refs, ref->name) || - string_list_has_string(&existing_refs, ref->name)) + if (refname_hash_exists(&remote_refs, ref->name) || + refname_hash_exists(&existing_refs, ref->name)) continue; - item = string_list_insert(&remote_refs, ref->name); - item->util = (void *)&ref->old_oid; + item = refname_hash_add(&remote_refs, ref->name, &ref->old_oid); + string_list_insert(&remote_refs_list, ref->name); } - string_list_clear(&existing_refs, 1); + hashmap_free(&existing_refs, 1); /* * We may have a final lightweight tag that needs to be * checked to see if it needs fetching. */ if (item && - !has_sha1_file_with_flags(item->util, OBJECT_INFO_QUICK) && - !will_fetch(head, item->util)) - item->util = NULL; + !has_sha1_file_with_flags(item->oid.hash, OBJECT_INFO_QUICK) && + !will_fetch(head, item->oid.hash)) + oidclr(&item->oid); /* - * For all the tags in the remote_refs string list, + * For all the tags in the remote_refs_list, * add them to the list of refs to be fetched */ - for_each_string_list_item(item, &remote_refs) { + for_each_string_list_item(remote_ref_item, &remote_refs_list) { + const char *refname = remote_ref_item->string; + + item = hashmap_get_from_hash(&remote_refs, strhash(refname), refname); + if (!item) + BUG("unseen remote ref?"); + /* Unless we have already decided to ignore this item... */ - if (item->util) - { - struct ref *rm = alloc_ref(item->string); - rm->peer_ref = alloc_ref(item->string); - oidcpy(&rm->old_oid, item->util); + if (!is_null_oid(&item->oid)) { + struct ref *rm = alloc_ref(item->refname); + rm->peer_ref = alloc_ref(item->refname); + oidcpy(&rm->old_oid, &item->oid); **tail = rm; *tail = &rm->next; } } - - string_list_clear(&remote_refs, 0); + hashmap_free(&remote_refs, 1); + string_list_clear(&remote_refs_list, 0); } static struct ref *get_ref_map(struct remote *remote, @@ -343,7 +394,7 @@ static struct ref *get_ref_map(struct remote *remote, /* opportunistically-updated references: */ struct ref *orefs = NULL, **oref_tail = &orefs; - struct string_list existing_refs = STRING_LIST_INIT_DUP; + struct hashmap existing_refs; if (rs->nr) { struct refspec *fetch_refspec; @@ -437,19 +488,24 @@ static struct ref *get_ref_map(struct remote *remote, ref_map = ref_remove_duplicates(ref_map); - for_each_ref(add_existing, &existing_refs); + refname_hash_init(&existing_refs); + for_each_ref(add_one_refname, &existing_refs); + for (rm = ref_map; rm; rm = rm->next) { if (rm->peer_ref) { - struct string_list_item *peer_item = - string_list_lookup(&existing_refs, - rm->peer_ref->name); + const char *refname = rm->peer_ref->name; + struct refname_hash_entry *peer_item; + + peer_item = hashmap_get_from_hash(&existing_refs, + strhash(refname), + refname); if (peer_item) { - struct object_id *old_oid = peer_item->util; + struct object_id *old_oid = &peer_item->oid; oidcpy(&rm->peer_ref->old_oid, old_oid); } } } - string_list_clear(&existing_refs, 1); + hashmap_free(&existing_refs, 1); return ref_map; } diff --git a/builtin/fsck.c b/builtin/fsck.c index 06eb421720..3c3e0f06e7 100644 --- a/builtin/fsck.c +++ b/builtin/fsck.c @@ -19,6 +19,7 @@ #include "packfile.h" #include "object-store.h" #include "run-command.h" +#include "worktree.h" #define REACHABLE 0x0001 #define SEEN 0x0002 @@ -36,8 +37,6 @@ static int check_strict; static int keep_cache_objects; static struct fsck_options fsck_walk_options = FSCK_OPTIONS_DEFAULT; static struct fsck_options fsck_obj_options = FSCK_OPTIONS_DEFAULT; -static struct object_id head_oid; -static const char *head_points_at; static int errors_found; static int write_lost_and_found; static int verbose; @@ -446,7 +445,11 @@ static int fsck_handle_reflog_ent(struct object_id *ooid, struct object_id *noid static int fsck_handle_reflog(const char *logname, const struct object_id *oid, int flag, void *cb_data) { - for_each_reflog_ent(logname, fsck_handle_reflog_ent, (void *)logname); + struct strbuf refname = STRBUF_INIT; + + strbuf_worktree_ref(cb_data, &refname, logname); + for_each_reflog_ent(refname.buf, fsck_handle_reflog_ent, refname.buf); + strbuf_release(&refname); return 0; } @@ -484,13 +487,34 @@ static int fsck_handle_ref(const char *refname, const struct object_id *oid, return 0; } +static int fsck_head_link(const char *head_ref_name, + const char **head_points_at, + struct object_id *head_oid); + static void get_default_heads(void) { - if (head_points_at && !is_null_oid(&head_oid)) - fsck_handle_ref("HEAD", &head_oid, 0, NULL); + struct worktree **worktrees, **p; + const char *head_points_at; + struct object_id head_oid; + for_each_rawref(fsck_handle_ref, NULL); - if (include_reflogs) - for_each_reflog(fsck_handle_reflog, NULL); + + worktrees = get_worktrees(0); + for (p = worktrees; *p; p++) { + struct worktree *wt = *p; + struct strbuf ref = STRBUF_INIT; + + strbuf_worktree_ref(wt, &ref, "HEAD"); + fsck_head_link(ref.buf, &head_points_at, &head_oid); + if (head_points_at && !is_null_oid(&head_oid)) + fsck_handle_ref(ref.buf, &head_oid, 0, NULL); + strbuf_release(&ref); + + if (include_reflogs) + refs_for_each_reflog(get_worktree_ref_store(wt), + fsck_handle_reflog, wt); + } + free_worktrees(worktrees); /* * Not having any default heads isn't really fatal, but @@ -579,33 +603,36 @@ static void fsck_object_dir(const char *path) stop_progress(&progress); } -static int fsck_head_link(void) +static int fsck_head_link(const char *head_ref_name, + const char **head_points_at, + struct object_id *head_oid) { int null_is_error = 0; if (verbose) - fprintf(stderr, "Checking HEAD link\n"); + fprintf(stderr, "Checking %s link\n", head_ref_name); - head_points_at = resolve_ref_unsafe("HEAD", 0, &head_oid, NULL); - if (!head_points_at) { + *head_points_at = resolve_ref_unsafe(head_ref_name, 0, head_oid, NULL); + if (!*head_points_at) { errors_found |= ERROR_REFS; - return error("Invalid HEAD"); + return error("Invalid %s", head_ref_name); } - if (!strcmp(head_points_at, "HEAD")) + if (!strcmp(*head_points_at, head_ref_name)) /* detached HEAD */ null_is_error = 1; - else if (!starts_with(head_points_at, "refs/heads/")) { + else if (!starts_with(*head_points_at, "refs/heads/")) { errors_found |= ERROR_REFS; - return error("HEAD points to something strange (%s)", - head_points_at); + return error("%s points to something strange (%s)", + head_ref_name, *head_points_at); } - if (is_null_oid(&head_oid)) { + if (is_null_oid(head_oid)) { if (null_is_error) { errors_found |= ERROR_REFS; - return error("HEAD: detached HEAD points at nothing"); + return error("%s: detached HEAD points at nothing", + head_ref_name); } - fprintf(stderr, "notice: HEAD points to an unborn branch (%s)\n", - head_points_at + 11); + fprintf(stderr, "notice: %s points to an unborn branch (%s)\n", + head_ref_name, *head_points_at + 11); } return 0; } @@ -720,7 +747,6 @@ int cmd_fsck(int argc, const char **argv, const char *prefix) git_config(fsck_config, NULL); - fsck_head_link(); if (connectivity_only) { for_each_loose_object(mark_loose_for_connectivity, NULL, 0); for_each_packed_object(mark_packed_for_connectivity, NULL, 0); diff --git a/builtin/grep.c b/builtin/grep.c index d8508ddf79..71df52a333 100644 --- a/builtin/grep.c +++ b/builtin/grep.c @@ -34,7 +34,6 @@ static int recurse_submodules; #define GREP_NUM_THREADS_DEFAULT 8 static int num_threads; -#ifndef NO_PTHREADS static pthread_t *threads; /* We use one producer thread and THREADS consumer @@ -70,13 +69,11 @@ static pthread_mutex_t grep_mutex; static inline void grep_lock(void) { - assert(num_threads); pthread_mutex_lock(&grep_mutex); } static inline void grep_unlock(void) { - assert(num_threads); pthread_mutex_unlock(&grep_mutex); } @@ -234,6 +231,9 @@ static int wait_all(void) int hit = 0; int i; + if (!HAVE_THREADS) + BUG("Never call this function unless you have started threads"); + grep_lock(); all_work_added = 1; @@ -265,13 +265,6 @@ static int wait_all(void) return hit; } -#else /* !NO_PTHREADS */ - -static int wait_all(void) -{ - return 0; -} -#endif static int grep_cmd_config(const char *var, const char *value, void *cb) { @@ -284,17 +277,15 @@ static int grep_cmd_config(const char *var, const char *value, void *cb) if (num_threads < 0) die(_("invalid number of threads specified (%d) for %s"), num_threads, var); -#ifdef NO_PTHREADS - else if (num_threads && num_threads != 1) { + else if (!HAVE_THREADS && num_threads > 1) { /* * TRANSLATORS: %s is the configuration * variable for tweaking threads, currently * grep.threads */ warning(_("no threads support, ignoring %s"), var); - num_threads = 0; + num_threads = 1; } -#endif } if (!strcmp(var, "submodule.recurse")) @@ -330,17 +321,14 @@ static int grep_oid(struct grep_opt *opt, const struct object_id *oid, grep_source_init(&gs, GREP_SOURCE_OID, pathbuf.buf, path, oid); strbuf_release(&pathbuf); -#ifndef NO_PTHREADS - if (num_threads) { + if (num_threads > 1) { /* * add_work() copies gs and thus assumes ownership of * its fields, so do not call grep_source_clear() */ add_work(opt, &gs); return 0; - } else -#endif - { + } else { int hit; hit = grep_source(opt, &gs); @@ -363,17 +351,14 @@ static int grep_file(struct grep_opt *opt, const char *filename) grep_source_init(&gs, GREP_SOURCE_FILE, buf.buf, filename, filename); strbuf_release(&buf); -#ifndef NO_PTHREADS - if (num_threads) { + if (num_threads > 1) { /* * add_work() copies gs and thus assumes ownership of * its fields, so do not call grep_source_clear() */ add_work(opt, &gs); return 0; - } else -#endif - { + } else { int hit; hit = grep_source(opt, &gs); @@ -422,11 +407,23 @@ static int grep_submodule(struct grep_opt *opt, struct repository *superproject, struct repository submodule; int hit; - if (!is_submodule_active(superproject, path)) + /* + * NEEDSWORK: submodules functions need to be protected because they + * access the object store via config_from_gitmodules(): the latter + * uses get_oid() which, for now, relies on the global the_repository + * object. + */ + grep_read_lock(); + + if (!is_submodule_active(superproject, path)) { + grep_read_unlock(); return 0; + } - if (repo_submodule_init(&submodule, superproject, path)) + if (repo_submodule_init(&submodule, superproject, path)) { + grep_read_unlock(); return 0; + } repo_read_gitmodules(&submodule); @@ -440,7 +437,6 @@ static int grep_submodule(struct grep_opt *opt, struct repository *superproject, * store is no longer global and instead is a member of the repository * object. */ - grep_read_lock(); add_to_alternates_memory(submodule.objects->objectdir); grep_read_unlock(); @@ -712,11 +708,14 @@ static int context_callback(const struct option *opt, const char *arg, static int file_callback(const struct option *opt, const char *arg, int unset) { struct grep_opt *grep_opt = opt->value; - int from_stdin = !strcmp(arg, "-"); + int from_stdin; FILE *patterns; int lno = 0; struct strbuf sb = STRBUF_INIT; + BUG_ON_OPT_NEG(unset); + + from_stdin = !strcmp(arg, "-"); patterns = from_stdin ? stdin : fopen(arg, "r"); if (!patterns) die_errno(_("cannot open '%s'"), arg); @@ -737,6 +736,8 @@ static int file_callback(const struct option *opt, const char *arg, int unset) static int not_callback(const struct option *opt, const char *arg, int unset) { struct grep_opt *grep_opt = opt->value; + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); append_grep_pattern(grep_opt, "--not", "command line", 0, GREP_NOT); return 0; } @@ -744,6 +745,8 @@ static int not_callback(const struct option *opt, const char *arg, int unset) static int and_callback(const struct option *opt, const char *arg, int unset) { struct grep_opt *grep_opt = opt->value; + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); append_grep_pattern(grep_opt, "--and", "command line", 0, GREP_AND); return 0; } @@ -751,6 +754,8 @@ static int and_callback(const struct option *opt, const char *arg, int unset) static int open_callback(const struct option *opt, const char *arg, int unset) { struct grep_opt *grep_opt = opt->value; + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); append_grep_pattern(grep_opt, "(", "command line", 0, GREP_OPEN_PAREN); return 0; } @@ -758,6 +763,8 @@ static int open_callback(const struct option *opt, const char *arg, int unset) static int close_callback(const struct option *opt, const char *arg, int unset) { struct grep_opt *grep_opt = opt->value; + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); append_grep_pattern(grep_opt, ")", "command line", 0, GREP_CLOSE_PAREN); return 0; } @@ -766,6 +773,7 @@ static int pattern_callback(const struct option *opt, const char *arg, int unset) { struct grep_opt *grep_opt = opt->value; + BUG_ON_OPT_NEG(unset); append_grep_pattern(grep_opt, arg, "-e option", 0, GREP_PATTERN); return 0; } @@ -1038,39 +1046,35 @@ int cmd_grep(int argc, const char **argv, const char *prefix) pathspec.recursive = 1; pathspec.recurse_submodules = !!recurse_submodules; -#ifndef NO_PTHREADS - if (list.nr || cached || show_in_pager) - num_threads = 0; - else if (num_threads == 0) - num_threads = GREP_NUM_THREADS_DEFAULT; - else if (num_threads < 0) - die(_("invalid number of threads specified (%d)"), num_threads); - if (num_threads == 1) - num_threads = 0; -#else - if (num_threads) + if (list.nr || cached || show_in_pager) { + if (num_threads > 1) + warning(_("invalid option combination, ignoring --threads")); + num_threads = 1; + } else if (!HAVE_THREADS && num_threads > 1) { warning(_("no threads support, ignoring --threads")); - num_threads = 0; -#endif + num_threads = 1; + } else if (num_threads < 0) + die(_("invalid number of threads specified (%d)"), num_threads); + else if (num_threads == 0) + num_threads = HAVE_THREADS ? GREP_NUM_THREADS_DEFAULT : 1; - if (!num_threads) + if (num_threads > 1) { + if (!HAVE_THREADS) + BUG("Somebody got num_threads calculation wrong!"); + if (!(opt.name_only || opt.unmatch_name_only || opt.count) + && (opt.pre_context || opt.post_context || + opt.file_break || opt.funcbody)) + skip_first_line = 1; + start_threads(&opt); + } else { /* * The compiled patterns on the main path are only * used when not using threading. Otherwise - * start_threads() below calls compile_grep_patterns() + * start_threads() above calls compile_grep_patterns() * for each thread. */ compile_grep_patterns(&opt); - -#ifndef NO_PTHREADS - if (num_threads) { - if (!(opt.name_only || opt.unmatch_name_only || opt.count) - && (opt.pre_context || opt.post_context || - opt.file_break || opt.funcbody)) - skip_first_line = 1; - start_threads(&opt); } -#endif if (show_in_pager && (cached || list.nr)) die(_("--open-files-in-pager only works on the worktree")); @@ -1121,7 +1125,7 @@ int cmd_grep(int argc, const char **argv, const char *prefix) hit = grep_objects(&opt, &pathspec, &list); } - if (num_threads) + if (num_threads > 1) hit |= wait_all(); if (hit && show_in_pager) run_pager(&opt, prefix); diff --git a/builtin/index-pack.c b/builtin/index-pack.c index 2004e25da2..682042579b 100644 --- a/builtin/index-pack.c +++ b/builtin/index-pack.c @@ -42,9 +42,7 @@ struct base_data { }; struct thread_local { -#ifndef NO_PTHREADS pthread_t thread; -#endif struct base_data *base_cache; size_t base_cache_used; int pack_fd; @@ -98,8 +96,6 @@ static uint32_t input_crc32; static int input_fd, output_fd; static const char *curr_pack; -#ifndef NO_PTHREADS - static struct thread_local *thread_data; static int nr_dispatched; static int threads_active; @@ -179,26 +175,6 @@ static void cleanup_thread(void) free(thread_data); } -#else - -#define read_lock() -#define read_unlock() - -#define counter_lock() -#define counter_unlock() - -#define work_lock() -#define work_unlock() - -#define deepest_delta_lock() -#define deepest_delta_unlock() - -#define type_cas_lock() -#define type_cas_unlock() - -#endif - - static int mark_link(struct object *obj, int type, void *data, struct fsck_options *options) { if (!obj) @@ -364,22 +340,20 @@ static NORETURN void bad_object(off_t offset, const char *format, ...) static inline struct thread_local *get_thread_data(void) { -#ifndef NO_PTHREADS - if (threads_active) - return pthread_getspecific(key); - assert(!threads_active && - "This should only be reached when all threads are gone"); -#endif + if (HAVE_THREADS) { + if (threads_active) + return pthread_getspecific(key); + assert(!threads_active && + "This should only be reached when all threads are gone"); + } return ¬hread_data; } -#ifndef NO_PTHREADS static void set_thread_data(struct thread_local *data) { if (threads_active) pthread_setspecific(key, data); } -#endif static struct base_data *alloc_base_data(void) { @@ -1092,7 +1066,6 @@ static void resolve_base(struct object_entry *obj) find_unresolved_deltas(base_obj); } -#ifndef NO_PTHREADS static void *threaded_second_pass(void *data) { set_thread_data(data); @@ -1116,7 +1089,6 @@ static void *threaded_second_pass(void *data) } return NULL; } -#endif /* * First pass: @@ -1213,7 +1185,6 @@ static void resolve_deltas(void) progress = start_progress(_("Resolving deltas"), nr_ref_deltas + nr_ofs_deltas); -#ifndef NO_PTHREADS nr_dispatched = 0; if (nr_threads > 1 || getenv("GIT_FORCE_THREADS")) { init_thread(); @@ -1229,7 +1200,6 @@ static void resolve_deltas(void) cleanup_thread(); return; } -#endif for (i = 0; i < nr_objects; i++) { struct object_entry *obj = &objects[i]; @@ -1531,11 +1501,10 @@ static int git_index_pack_config(const char *k, const char *v, void *cb) if (nr_threads < 0) die(_("invalid number of threads specified (%d)"), nr_threads); -#ifdef NO_PTHREADS - if (nr_threads != 1) + if (!HAVE_THREADS && nr_threads != 1) { warning(_("no threads support, ignoring %s"), k); - nr_threads = 1; -#endif + nr_threads = 1; + } return 0; } return git_default_config(k, v, cb); @@ -1723,12 +1692,10 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) nr_threads = strtoul(arg+10, &end, 0); if (!arg[10] || *end || nr_threads < 0) usage(index_pack_usage); -#ifdef NO_PTHREADS - if (nr_threads != 1) - warning(_("no threads support, " - "ignoring %s"), arg); - nr_threads = 1; -#endif + if (!HAVE_THREADS && nr_threads != 1) { + warning(_("no threads support, ignoring %s"), arg); + nr_threads = 1; + } } else if (starts_with(arg, "--pack_header=")) { struct pack_header *hdr; char *c; @@ -1791,14 +1758,12 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) if (strict) opts.flags |= WRITE_IDX_STRICT; -#ifndef NO_PTHREADS - if (!nr_threads) { + if (HAVE_THREADS && !nr_threads) { nr_threads = online_cpus(); /* An experiment showed that more threads does not mean faster */ if (nr_threads > 3) nr_threads = 3; } -#endif curr_pack = open_pack_file(pack_name); parse_pack_header(); diff --git a/builtin/init-db.c b/builtin/init-db.c index 12ddda7e7b..41faffd28d 100644 --- a/builtin/init-db.c +++ b/builtin/init-db.c @@ -451,6 +451,7 @@ static int guess_repository_type(const char *git_dir) static int shared_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); *((int *) opt->value) = (arg) ? git_config_perm("arg", arg) : PERM_GROUP; return 0; } diff --git a/builtin/interpret-trailers.c b/builtin/interpret-trailers.c index 4b87e0dd2e..8ae40dec47 100644 --- a/builtin/interpret-trailers.c +++ b/builtin/interpret-trailers.c @@ -80,6 +80,8 @@ static int parse_opt_parse(const struct option *opt, const char *arg, v->only_trailers = 1; v->only_input = 1; v->unfold = 1; + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); return 0; } diff --git a/builtin/log.c b/builtin/log.c index 061d4fd864..9f2d987294 100644 --- a/builtin/log.c +++ b/builtin/log.c @@ -107,6 +107,8 @@ static int log_line_range_callback(const struct option *option, const char *arg, { struct line_opt_callback_data *data = option->value; + BUG_ON_OPT_NEG(unset); + if (!arg) return -1; @@ -1151,6 +1153,8 @@ static int keep_subject = 0; static int keep_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); ((struct rev_info *)opt->value)->total = -1; keep_subject = 1; return 0; @@ -1161,6 +1165,7 @@ static int subject_prefix = 0; static int subject_prefix_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); subject_prefix = 1; ((struct rev_info *)opt->value)->subject_prefix = arg; return 0; @@ -1168,6 +1173,8 @@ static int subject_prefix_callback(const struct option *opt, const char *arg, static int rfc_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); return subject_prefix_callback(opt, "RFC PATCH", unset); } @@ -1176,6 +1183,7 @@ static int numbered_cmdline_opt = 0; static int numbered_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_ARG(arg); *(int *)opt->value = numbered_cmdline_opt = unset ? 0 : 1; if (unset) auto_number = 0; @@ -1185,6 +1193,7 @@ static int numbered_callback(const struct option *opt, const char *arg, static int no_numbered_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); return numbered_callback(opt, arg, 1); } @@ -1192,6 +1201,7 @@ static int output_directory_callback(const struct option *opt, const char *arg, int unset) { const char **dir = (const char **)opt->value; + BUG_ON_OPT_NEG(unset); if (*dir) die(_("Two output directories?")); *dir = arg; @@ -1508,7 +1518,7 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix) PARSE_OPT_NOARG, numbered_callback }, { OPTION_CALLBACK, 'N', "no-numbered", &numbered, NULL, N_("use [PATCH] even with multiple patches"), - PARSE_OPT_NOARG, no_numbered_callback }, + PARSE_OPT_NOARG | PARSE_OPT_NONEG, no_numbered_callback }, OPT_BOOL('s', "signoff", &do_signoff, N_("add Signed-off-by:")), OPT_BOOL(0, "stdout", &use_stdout, N_("print patches to standard out")), diff --git a/builtin/ls-files.c b/builtin/ls-files.c index 7f9919a362..c70a9c7158 100644 --- a/builtin/ls-files.c +++ b/builtin/ls-files.c @@ -475,6 +475,8 @@ static int option_parse_exclude(const struct option *opt, { struct string_list *exclude_list = opt->value; + BUG_ON_OPT_NEG(unset); + exc_given = 1; string_list_append(exclude_list, arg); @@ -486,6 +488,8 @@ static int option_parse_exclude_from(const struct option *opt, { struct dir_struct *dir = opt->value; + BUG_ON_OPT_NEG(unset); + exc_given = 1; add_excludes_from_file(dir, arg); @@ -497,6 +501,9 @@ static int option_parse_exclude_standard(const struct option *opt, { struct dir_struct *dir = opt->value; + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); + exc_given = 1; setup_standard_excludes(dir); @@ -548,15 +555,16 @@ int cmd_ls_files(int argc, const char **argv, const char *cmd_prefix) N_("show resolve-undo information")), { OPTION_CALLBACK, 'x', "exclude", &exclude_list, N_("pattern"), N_("skip files matching pattern"), - 0, option_parse_exclude }, + PARSE_OPT_NONEG, option_parse_exclude }, { OPTION_CALLBACK, 'X', "exclude-from", &dir, N_("file"), N_("exclude patterns are read from <file>"), - 0, option_parse_exclude_from }, + PARSE_OPT_NONEG, option_parse_exclude_from }, OPT_STRING(0, "exclude-per-directory", &dir.exclude_per_dir, N_("file"), N_("read additional per-directory exclude patterns in <file>")), { OPTION_CALLBACK, 0, "exclude-standard", &dir, NULL, N_("add the standard git exclusions"), - PARSE_OPT_NOARG, option_parse_exclude_standard }, + PARSE_OPT_NOARG | PARSE_OPT_NONEG, + option_parse_exclude_standard }, OPT_SET_INT_F(0, "full-name", &prefix_len, N_("make the output relative to the project top directory"), 0, PARSE_OPT_NONEG), diff --git a/builtin/ls-remote.c b/builtin/ls-remote.c index 6a0cdec30d..1d7f1f5ce2 100644 --- a/builtin/ls-remote.c +++ b/builtin/ls-remote.c @@ -88,18 +88,15 @@ int cmd_ls_remote(int argc, const char **argv, const char *prefix) int i; pattern = xcalloc(argc, sizeof(const char *)); for (i = 1; i < argc; i++) { - const char *glob; pattern[i - 1] = xstrfmt("*/%s", argv[i]); - - glob = strchr(argv[i], '*'); - if (glob) - argv_array_pushf(&ref_prefixes, "%.*s", - (int)(glob - argv[i]), argv[i]); - else - expand_ref_prefix(&ref_prefixes, argv[i]); } } + if (flags & REF_TAGS) + argv_array_push(&ref_prefixes, "refs/tags/"); + if (flags & REF_HEADS) + argv_array_push(&ref_prefixes, "refs/heads/"); + remote = remote_get(dest); if (!remote) { if (dest) diff --git a/builtin/merge-file.c b/builtin/merge-file.c index b08803e611..06a2f90c48 100644 --- a/builtin/merge-file.c +++ b/builtin/merge-file.c @@ -15,6 +15,8 @@ static int label_cb(const struct option *opt, const char *arg, int unset) static int label_count = 0; const char **names = (const char **)opt->value; + BUG_ON_OPT_NEG(unset); + if (label_count >= 3) return error("too many labels on the command line"); names[label_count++] = arg; diff --git a/builtin/merge-tree.c b/builtin/merge-tree.c index 8fc108d305..70f6fc9167 100644 --- a/builtin/merge-tree.c +++ b/builtin/merge-tree.c @@ -110,7 +110,8 @@ static void show_diff(struct merge_list *entry) xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 3; - ecb.outf = show_outf; + ecb.out_hunk = NULL; + ecb.out_line = show_outf; ecb.priv = NULL; src.ptr = origin(entry, &size); diff --git a/builtin/merge.c b/builtin/merge.c index 4aa6071598..c3c976d471 100644 --- a/builtin/merge.c +++ b/builtin/merge.c @@ -224,6 +224,7 @@ static int option_parse_x(const struct option *opt, static int option_parse_n(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_ARG(arg); show_diffstat = unset; return 0; } @@ -1336,6 +1337,10 @@ int cmd_merge(int argc, const char **argv, const char *prefix) die(_("%s - not something we can merge"), argv[0]); if (remoteheads->next) die(_("Can merge only exactly one commit into empty head")); + + if (verify_signatures) + verify_merge_signature(remoteheads->item, verbosity); + remote_head_oid = &remoteheads->item->object.oid; read_empty(remote_head_oid, 0); update_ref("initial pull", "HEAD", remote_head_oid, NULL, 0, @@ -1357,31 +1362,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix) if (verify_signatures) { for (p = remoteheads; p; p = p->next) { - struct commit *commit = p->item; - char hex[GIT_MAX_HEXSZ + 1]; - struct signature_check signature_check; - memset(&signature_check, 0, sizeof(signature_check)); - - check_commit_signature(commit, &signature_check); - - find_unique_abbrev_r(hex, &commit->object.oid, DEFAULT_ABBREV); - switch (signature_check.result) { - case 'G': - break; - case 'U': - die(_("Commit %s has an untrusted GPG signature, " - "allegedly by %s."), hex, signature_check.signer); - case 'B': - die(_("Commit %s has a bad GPG signature " - "allegedly by %s."), hex, signature_check.signer); - default: /* 'N' */ - die(_("Commit %s does not have a GPG signature."), hex); - } - if (verbosity >= 0 && signature_check.result == 'G') - printf(_("Commit %s has a good GPG signature by %s\n"), - hex, signature_check.signer); - - signature_check_clear(&signature_check); + verify_merge_signature(p->item, verbosity); } } diff --git a/builtin/notes.c b/builtin/notes.c index c05cd004ab..c78b7a0c5b 100644 --- a/builtin/notes.c +++ b/builtin/notes.c @@ -215,6 +215,8 @@ static int parse_msg_arg(const struct option *opt, const char *arg, int unset) { struct note_data *d = opt->value; + BUG_ON_OPT_NEG(unset); + strbuf_grow(&d->buf, strlen(arg) + 2); if (d->buf.len) strbuf_addch(&d->buf, '\n'); @@ -229,6 +231,8 @@ static int parse_file_arg(const struct option *opt, const char *arg, int unset) { struct note_data *d = opt->value; + BUG_ON_OPT_NEG(unset); + if (d->buf.len) strbuf_addch(&d->buf, '\n'); if (!strcmp(arg, "-")) { @@ -250,15 +254,15 @@ static int parse_reuse_arg(const struct option *opt, const char *arg, int unset) enum object_type type; unsigned long len; + BUG_ON_OPT_NEG(unset); + if (d->buf.len) strbuf_addch(&d->buf, '\n'); if (get_oid(arg, &object)) die(_("failed to resolve '%s' as a valid ref."), arg); - if (!(buf = read_object_file(&object, &type, &len))) { - free(buf); + if (!(buf = read_object_file(&object, &type, &len))) die(_("failed to read object '%s'."), arg); - } if (type != OBJ_BLOB) { free(buf); die(_("cannot read note data from non-blob object '%s'."), arg); @@ -273,6 +277,7 @@ static int parse_reuse_arg(const struct option *opt, const char *arg, int unset) static int parse_reedit_arg(const struct option *opt, const char *arg, int unset) { struct note_data *d = opt->value; + BUG_ON_OPT_NEG(unset); d->use_editor = 1; return parse_reuse_arg(opt, arg, unset); } diff --git a/builtin/pack-objects.c b/builtin/pack-objects.c index c99ee79c31..794714e4f8 100644 --- a/builtin/pack-objects.c +++ b/builtin/pack-objects.c @@ -1953,8 +1953,6 @@ static int delta_cacheable(unsigned long src_size, unsigned long trg_size, return 0; } -#ifndef NO_PTHREADS - /* Protect access to object database */ static pthread_mutex_t read_mutex; #define read_lock() pthread_mutex_lock(&read_mutex) @@ -1979,16 +1977,6 @@ static pthread_mutex_t progress_mutex; * ahead in the list because they can be stolen and would need * progress_mutex for protection. */ -#else - -#define read_lock() (void)0 -#define read_unlock() (void)0 -#define cache_lock() (void)0 -#define cache_unlock() (void)0 -#define progress_lock() (void)0 -#define progress_unlock() (void)0 - -#endif /* * Return the size of the object without doing any delta @@ -2347,8 +2335,6 @@ static void find_deltas(struct object_entry **list, unsigned *list_size, free(array); } -#ifndef NO_PTHREADS - static void try_to_free_from_threads(size_t size) { read_lock(); @@ -2577,10 +2563,6 @@ static void ll_find_deltas(struct object_entry **list, unsigned list_size, free(p); } -#else -#define ll_find_deltas(l, s, w, d, p) find_deltas(l, &s, w, d, p) -#endif - static void add_tag_chain(const struct object_id *oid) { struct tag *tag; @@ -2733,12 +2715,10 @@ static int git_pack_config(const char *k, const char *v, void *cb) if (delta_search_threads < 0) die(_("invalid number of threads specified (%d)"), delta_search_threads); -#ifdef NO_PTHREADS - if (delta_search_threads != 1) { + if (!HAVE_THREADS && delta_search_threads != 1) { warning(_("no threads support, ignoring %s"), k); delta_search_threads = 0; } -#endif return 0; } if (!strcmp(k, "pack.indexversion")) { @@ -3207,6 +3187,9 @@ static int option_parse_index_version(const struct option *opt, { char *c; const char *val = arg; + + BUG_ON_OPT_NEG(unset); + pack_idx_opts.version = strtoul(val, &c, 10); if (pack_idx_opts.version > 2) die(_("unsupported index version %s"), val); @@ -3253,7 +3236,7 @@ int cmd_pack_objects(int argc, const char **argv, const char *prefix) N_("similar to --all-progress when progress meter is shown")), { OPTION_CALLBACK, 0, "index-version", NULL, N_("<version>[,<offset>]"), N_("write the pack index file in the specified idx format version"), - 0, option_parse_index_version }, + PARSE_OPT_NONEG, option_parse_index_version }, OPT_MAGNITUDE(0, "max-pack-size", &pack_size_limit, N_("maximum size of each output pack file")), OPT_BOOL(0, "local", &local, @@ -3402,10 +3385,8 @@ int cmd_pack_objects(int argc, const char **argv, const char *prefix) if (!delta_search_threads) /* --threads=0 means autodetect */ delta_search_threads = online_cpus(); -#ifdef NO_PTHREADS - if (delta_search_threads != 1) + if (!HAVE_THREADS && delta_search_threads != 1) warning(_("no threads support, ignoring --threads")); -#endif if (!pack_to_stdout && !pack_size_limit) pack_size_limit = pack_size_limit_cfg; if (pack_to_stdout && pack_size_limit) diff --git a/builtin/pull.c b/builtin/pull.c index c21aa276f1..1b90622b13 100644 --- a/builtin/pull.c +++ b/builtin/pull.c @@ -557,6 +557,17 @@ static int run_fetch(const char *repo, const char **refspecs) static int pull_into_void(const struct object_id *merge_head, const struct object_id *curr_head) { + if (opt_verify_signatures) { + struct commit *commit; + + commit = lookup_commit(the_repository, merge_head); + if (!commit) + die(_("unable to access commit %s"), + oid_to_hex(merge_head)); + + verify_merge_signature(commit, opt_verbosity); + } + /* * Two-way merge: we treat the index as based on an empty tree, * and try to fast-forward to HEAD. This ensures we will not lose diff --git a/builtin/read-tree.c b/builtin/read-tree.c index fbbc98e516..183ee8c1e5 100644 --- a/builtin/read-tree.c +++ b/builtin/read-tree.c @@ -44,6 +44,7 @@ static const char * const read_tree_usage[] = { static int index_output_cb(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); set_alternate_index_output(arg); return 0; } @@ -54,6 +55,8 @@ static int exclude_per_directory_cb(const struct option *opt, const char *arg, struct dir_struct *dir; struct unpack_trees_options *opts; + BUG_ON_OPT_NEG(unset); + opts = (struct unpack_trees_options *)opt->value; if (opts->dir) diff --git a/builtin/rebase.c b/builtin/rebase.c index 0ee06aa363..59e6f7852f 100644 --- a/builtin/rebase.c +++ b/builtin/rebase.c @@ -23,6 +23,7 @@ #include "revision.h" #include "commit-reach.h" #include "rerere.h" +#include "branch.h" static char const * const builtin_rebase_usage[] = { N_("git rebase [-i] [options] [--exec <cmd>] [--onto <newbase>] " @@ -522,12 +523,17 @@ finished_rebase: #define GIT_REFLOG_ACTION_ENVIRONMENT "GIT_REFLOG_ACTION" +#define RESET_HEAD_DETACH (1<<0) +#define RESET_HEAD_HARD (1<<1) + static int reset_head(struct object_id *oid, const char *action, - const char *switch_to_branch, int detach_head, + const char *switch_to_branch, unsigned flags, const char *reflog_orig_head, const char *reflog_head) { + unsigned detach_head = flags & RESET_HEAD_DETACH; + unsigned reset_hard = flags & RESET_HEAD_HARD; struct object_id head_oid; - struct tree_desc desc; + struct tree_desc desc[2] = { { NULL }, { NULL } }; struct lock_file lock = LOCK_INIT; struct unpack_trees_options unpack_tree_opts; struct tree *tree; @@ -536,60 +542,62 @@ static int reset_head(struct object_id *oid, const char *action, size_t prefix_len; struct object_id *orig = NULL, oid_orig, *old_orig = NULL, oid_old_orig; - int ret = 0; + int ret = 0, nr = 0; if (switch_to_branch && !starts_with(switch_to_branch, "refs/")) BUG("Not a fully qualified branch: '%s'", switch_to_branch); - if (hold_locked_index(&lock, LOCK_REPORT_ON_ERROR) < 0) - return -1; + if (hold_locked_index(&lock, LOCK_REPORT_ON_ERROR) < 0) { + ret = -1; + goto leave_reset_head; + } - if (!oid) { - if (get_oid("HEAD", &head_oid)) { - rollback_lock_file(&lock); - return error(_("could not determine HEAD revision")); - } - oid = &head_oid; + if ((!oid || !reset_hard) && get_oid("HEAD", &head_oid)) { + ret = error(_("could not determine HEAD revision")); + goto leave_reset_head; } + if (!oid) + oid = &head_oid; + memset(&unpack_tree_opts, 0, sizeof(unpack_tree_opts)); setup_unpack_trees_porcelain(&unpack_tree_opts, action); unpack_tree_opts.head_idx = 1; unpack_tree_opts.src_index = the_repository->index; unpack_tree_opts.dst_index = the_repository->index; - unpack_tree_opts.fn = oneway_merge; + unpack_tree_opts.fn = reset_hard ? oneway_merge : twoway_merge; unpack_tree_opts.update = 1; unpack_tree_opts.merge = 1; if (!detach_head) unpack_tree_opts.reset = 1; if (read_index_unmerged(the_repository->index) < 0) { - rollback_lock_file(&lock); - return error(_("could not read index")); + ret = error(_("could not read index")); + goto leave_reset_head; } - if (!fill_tree_descriptor(&desc, oid)) { - error(_("failed to find tree of %s"), oid_to_hex(oid)); - rollback_lock_file(&lock); - free((void *)desc.buffer); - return -1; + if (!reset_hard && !fill_tree_descriptor(&desc[nr++], &head_oid)) { + ret = error(_("failed to find tree of %s"), oid_to_hex(oid)); + goto leave_reset_head; } - if (unpack_trees(1, &desc, &unpack_tree_opts)) { - rollback_lock_file(&lock); - free((void *)desc.buffer); - return -1; + if (!fill_tree_descriptor(&desc[nr++], oid)) { + ret = error(_("failed to find tree of %s"), oid_to_hex(oid)); + goto leave_reset_head; + } + + if (unpack_trees(nr, desc, &unpack_tree_opts)) { + ret = -1; + goto leave_reset_head; } tree = parse_tree_indirect(oid); prime_cache_tree(the_repository->index, tree); - if (write_locked_index(the_repository->index, &lock, COMMIT_LOCK) < 0) + if (write_locked_index(the_repository->index, &lock, COMMIT_LOCK) < 0) { ret = error(_("could not write index")); - free((void *)desc.buffer); - - if (ret) - return ret; + goto leave_reset_head; + } reflog_action = getenv(GIT_REFLOG_ACTION_ENVIRONMENT); strbuf_addf(&msg, "%s: ", reflog_action ? reflog_action : "rebase"); @@ -613,7 +621,8 @@ static int reset_head(struct object_id *oid, const char *action, reflog_head = msg.buf; } if (!switch_to_branch) - ret = update_ref(reflog_head, "HEAD", oid, orig, REF_NO_DEREF, + ret = update_ref(reflog_head, "HEAD", oid, orig, + detach_head ? REF_NO_DEREF : 0, UPDATE_REFS_MSG_ON_ERR); else { ret = create_symref("HEAD", switch_to_branch, msg.buf); @@ -622,7 +631,11 @@ static int reset_head(struct object_id *oid, const char *action, UPDATE_REFS_MSG_ON_ERR); } +leave_reset_head: strbuf_release(&msg); + rollback_lock_file(&lock); + while (nr) + free((void *)desc[--nr].buffer); return ret; } @@ -703,6 +716,9 @@ static int parse_opt_merge(const struct option *opt, const char *arg, int unset) { struct rebase_options *opts = opt->value; + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); + if (!is_interactive(opts)) opts->type = REBASE_MERGE; @@ -715,6 +731,9 @@ static int parse_opt_interactive(const struct option *opt, const char *arg, { struct rebase_options *opts = opt->value; + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); + opts->type = REBASE_INTERACTIVE; opts->flags |= REBASE_INTERACTIVE_EXPLICIT; @@ -1000,8 +1019,10 @@ int cmd_rebase(int argc, const char **argv, const char *prefix) rerere_clear(&merge_rr); string_list_clear(&merge_rr, 1); - if (reset_head(NULL, "reset", NULL, 0, NULL, NULL) < 0) + if (reset_head(NULL, "reset", NULL, RESET_HEAD_HARD, + NULL, NULL) < 0) die(_("could not discard worktree changes")); + remove_branch_state(); if (read_basic_state(&options)) exit(1); goto run_rebase; @@ -1016,9 +1037,11 @@ int cmd_rebase(int argc, const char **argv, const char *prefix) if (read_basic_state(&options)) exit(1); if (reset_head(&options.orig_head, "reset", - options.head_name, 0, NULL, NULL) < 0) + options.head_name, RESET_HEAD_HARD, + NULL, NULL) < 0) die(_("could not move back to %s"), oid_to_hex(&options.orig_head)); + remove_branch_state(); ret = finish_rebase(&options); goto cleanup; } @@ -1380,7 +1403,7 @@ int cmd_rebase(int argc, const char **argv, const char *prefix) write_file(autostash, "%s", oid_to_hex(&oid)); printf(_("Created autostash: %s\n"), buf.buf); if (reset_head(&head->object.oid, "reset --hard", - NULL, 0, NULL, NULL) < 0) + NULL, RESET_HEAD_HARD, NULL, NULL) < 0) die(_("could not reset --hard")); printf(_("HEAD is now at %s"), find_unique_abbrev(&head->object.oid, @@ -1500,8 +1523,8 @@ int cmd_rebase(int argc, const char **argv, const char *prefix) "it...\n")); strbuf_addf(&msg, "rebase: checkout %s", options.onto_name); - if (reset_head(&options.onto->object.oid, "checkout", NULL, 1, - NULL, msg.buf)) + if (reset_head(&options.onto->object.oid, "checkout", NULL, + RESET_HEAD_DETACH, NULL, msg.buf)) die(_("Could not detach HEAD")); strbuf_release(&msg); diff --git a/builtin/reflog.c b/builtin/reflog.c index b5941c1ff3..7a85e4b164 100644 --- a/builtin/reflog.c +++ b/builtin/reflog.c @@ -10,6 +10,7 @@ #include "diff.h" #include "revision.h" #include "reachable.h" +#include "worktree.h" /* NEEDSWORK: switch to using parse_options */ static const char reflog_expire_usage[] = @@ -52,6 +53,7 @@ struct collect_reflog_cb { struct collected_reflog **e; int alloc; int nr; + struct worktree *wt; }; /* Remember to update object flag allocation in object.h */ @@ -330,13 +332,27 @@ static int push_tip_to_list(const char *refname, const struct object_id *oid, return 0; } +static int is_head(const char *refname) +{ + switch (ref_type(refname)) { + case REF_TYPE_OTHER_PSEUDOREF: + case REF_TYPE_MAIN_PSEUDOREF: + if (parse_worktree_ref(refname, NULL, NULL, &refname)) + BUG("not a worktree ref: %s", refname); + break; + default: + break; + } + return !strcmp(refname, "HEAD"); +} + static void reflog_expiry_prepare(const char *refname, const struct object_id *oid, void *cb_data) { struct expire_reflog_policy_cb *cb = cb_data; - if (!cb->cmd.expire_unreachable || !strcmp(refname, "HEAD")) { + if (!cb->cmd.expire_unreachable || is_head(refname)) { cb->tip_commit = NULL; cb->unreachable_expire_kind = UE_HEAD; } else { @@ -388,8 +404,19 @@ static int collect_reflog(const char *ref, const struct object_id *oid, int unus { struct collected_reflog *e; struct collect_reflog_cb *cb = cb_data; + struct strbuf newref = STRBUF_INIT; + + /* + * Avoid collecting the same shared ref multiple times because + * they are available via all worktrees. + */ + if (!cb->wt->is_current && ref_type(ref) == REF_TYPE_NORMAL) + return 0; + + strbuf_worktree_ref(cb->wt, &newref, ref); + FLEX_ALLOC_STR(e, reflog, newref.buf); + strbuf_release(&newref); - FLEX_ALLOC_STR(e, reflog, ref); oidcpy(&e->oid, oid); ALLOC_GROW(cb->e, cb->nr + 1, cb->alloc); cb->e[cb->nr++] = e; @@ -512,7 +539,7 @@ static int cmd_reflog_expire(int argc, const char **argv, const char *prefix) { struct expire_reflog_policy_cb cb; timestamp_t now = time(NULL); - int i, status, do_all; + int i, status, do_all, all_worktrees = 1; int explicit_expiry = 0; unsigned int flags = 0; @@ -549,6 +576,8 @@ static int cmd_reflog_expire(int argc, const char **argv, const char *prefix) flags |= EXPIRE_REFLOGS_UPDATE_REF; else if (!strcmp(arg, "--all")) do_all = 1; + else if (!strcmp(arg, "--single-worktree")) + all_worktrees = 0; else if (!strcmp(arg, "--verbose")) flags |= EXPIRE_REFLOGS_VERBOSE; else if (!strcmp(arg, "--")) { @@ -577,10 +606,19 @@ static int cmd_reflog_expire(int argc, const char **argv, const char *prefix) if (do_all) { struct collect_reflog_cb collected; + struct worktree **worktrees, **p; int i; memset(&collected, 0, sizeof(collected)); - for_each_reflog(collect_reflog, &collected); + worktrees = get_worktrees(0); + for (p = worktrees; *p; p++) { + if (!all_worktrees && !(*p)->is_current) + continue; + collected.wt = *p; + refs_for_each_reflog(get_worktree_ref_store(*p), + collect_reflog, &collected); + } + free_worktrees(worktrees); for (i = 0; i < collected.nr; i++) { struct collected_reflog *e = collected.e[i]; set_reflog_expiry_param(&cb.cmd, explicit_expiry, e->reflog); diff --git a/builtin/repack.c b/builtin/repack.c index 82c19b7555..45583683ee 100644 --- a/builtin/repack.c +++ b/builtin/repack.c @@ -431,8 +431,7 @@ int cmd_repack(int argc, const char **argv, const char *prefix) char *fname, *fname_old; if (!midx_cleared) { - /* if we move a packfile, it will invalidated the midx */ - clear_midx_file(get_object_directory()); + clear_midx_file(the_repository); midx_cleared = 1; } @@ -561,6 +560,10 @@ int cmd_repack(int argc, const char **argv, const char *prefix) if (!no_update_server_info) update_server_info(0); remove_temporary_files(); + + if (git_env_bool(GIT_TEST_MULTI_PACK_INDEX, 0)) + write_midx_file(get_object_directory()); + string_list_clear(&names, 0); string_list_clear(&rollback, 0); string_list_clear(&existing_packs, 0); diff --git a/builtin/rerere.c b/builtin/rerere.c index e89ccbc524..d78eeaed32 100644 --- a/builtin/rerere.c +++ b/builtin/rerere.c @@ -41,7 +41,8 @@ static int diff_two(const char *file1, const char *label1, xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 3; - ecb.outf = outf; + ecb.out_hunk = NULL; + ecb.out_line = outf; ret = xdi_diff(&minus, &plus, &xpp, &xecfg, &ecb); free(minus.ptr); diff --git a/builtin/reset.c b/builtin/reset.c index 6d37a35e2e..58166964f8 100644 --- a/builtin/reset.c +++ b/builtin/reset.c @@ -25,6 +25,8 @@ #include "submodule.h" #include "submodule-config.h" +#define REFRESH_INDEX_DELAY_WARNING_IN_MS (2 * 1000) + static const char * const git_reset_usage[] = { N_("git reset [--mixed | --soft | --hard | --merge | --keep] [-q] [<commit>]"), N_("git reset [-q] [<tree-ish>] [--] <paths>..."), @@ -307,6 +309,7 @@ int cmd_reset(int argc, const char **argv, const char *prefix) }; git_config(git_reset_config, NULL); + git_config_get_bool("reset.quiet", &quiet); argc = parse_options(argc, argv, prefix, options, git_reset_usage, PARSE_OPT_KEEP_DASHDASH); @@ -376,9 +379,19 @@ int cmd_reset(int argc, const char **argv, const char *prefix) int flags = quiet ? REFRESH_QUIET : REFRESH_IN_PORCELAIN; if (read_from_tree(&pathspec, &oid, intent_to_add)) return 1; - if (get_git_work_tree()) + if (!quiet && get_git_work_tree()) { + uint64_t t_begin, t_delta_in_ms; + + t_begin = getnanotime(); refresh_index(&the_index, flags, NULL, NULL, _("Unstaged changes after reset:")); + t_delta_in_ms = (getnanotime() - t_begin) / 1000000; + if (advice_reset_quiet_warning && t_delta_in_ms > REFRESH_INDEX_DELAY_WARNING_IN_MS) { + printf(_("\nIt took %.2f seconds to enumerate unstaged changes after reset. You can\n" + "use '--quiet' to avoid this. Set the config setting reset.quiet to true\n" + "to make this the default.\n"), t_delta_in_ms / 1000.0); + } + } } else { int err = reset_index(&oid, reset_type, quiet); if (reset_type == KEEP && !err) diff --git a/builtin/rev-parse.c b/builtin/rev-parse.c index 455f62246d..10d4dab894 100644 --- a/builtin/rev-parse.c +++ b/builtin/rev-parse.c @@ -765,6 +765,7 @@ int cmd_rev_parse(int argc, const char **argv, const char *prefix) } if (!strcmp(arg, "--all")) { for_each_ref(show_reference, NULL); + clear_ref_exclusion(&ref_excludes); continue; } if (skip_prefix(arg, "--disambiguate=", &arg)) { diff --git a/builtin/show-branch.c b/builtin/show-branch.c index 65f4a4c83c..934e514944 100644 --- a/builtin/show-branch.c +++ b/builtin/show-branch.c @@ -604,6 +604,7 @@ static int parse_reflog_param(const struct option *opt, const char *arg, { char *ep; const char **base = (const char **)opt->value; + BUG_ON_OPT_NEG(unset); if (!arg) arg = ""; reflog = strtoul(arg, &ep, 10); @@ -674,7 +675,7 @@ int cmd_show_branch(int ac, const char **av, const char *prefix) { OPTION_CALLBACK, 'g', "reflog", &reflog_base, N_("<n>[,<base>]"), N_("show <n> most recent ref-log entries starting at " "base"), - PARSE_OPT_OPTARG, + PARSE_OPT_OPTARG | PARSE_OPT_NONEG, parse_reflog_param }, OPT_END() }; diff --git a/builtin/show-ref.c b/builtin/show-ref.c index 2f13f1316f..ed888ffa48 100644 --- a/builtin/show-ref.c +++ b/builtin/show-ref.c @@ -151,6 +151,7 @@ static int hash_callback(const struct option *opt, const char *arg, int unset) static int exclude_existing_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); exclude_arg = 1; *(const char **)opt->value = arg; return 0; diff --git a/builtin/submodule--helper.c b/builtin/submodule--helper.c index 676175b9be..d38113a31a 100644 --- a/builtin/submodule--helper.c +++ b/builtin/submodule--helper.c @@ -2141,6 +2141,45 @@ static int check_name(int argc, const char **argv, const char *prefix) return 0; } +static int module_config(int argc, const char **argv, const char *prefix) +{ + enum { + CHECK_WRITEABLE = 1 + } command = 0; + + struct option module_config_options[] = { + OPT_CMDMODE(0, "check-writeable", &command, + N_("check if it is safe to write to the .gitmodules file"), + CHECK_WRITEABLE), + OPT_END() + }; + const char *const git_submodule_helper_usage[] = { + N_("git submodule--helper config name [value]"), + N_("git submodule--helper config --check-writeable"), + NULL + }; + + argc = parse_options(argc, argv, prefix, module_config_options, + git_submodule_helper_usage, PARSE_OPT_KEEP_ARGV0); + + if (argc == 1 && command == CHECK_WRITEABLE) + return is_writing_gitmodules_ok() ? 0 : -1; + + /* Equivalent to ACTION_GET in builtin/config.c */ + if (argc == 2) + return print_config_from_gitmodules(the_repository, argv[1]); + + /* Equivalent to ACTION_SET in builtin/config.c */ + if (argc == 3) { + if (!is_writing_gitmodules_ok()) + die(_("please make sure that the .gitmodules file is in the working tree")); + + return config_set_in_gitmodules_file_gently(argv[1], argv[2]); + } + + usage_with_options(git_submodule_helper_usage, module_config_options); +} + #define SUPPORT_SUPER_PREFIX (1<<0) struct cmd_struct { @@ -2170,6 +2209,7 @@ static struct cmd_struct commands[] = { {"absorb-git-dirs", absorb_git_dirs, SUPPORT_SUPER_PREFIX}, {"is-active", is_active, 0}, {"check-name", check_name, 0}, + {"config", module_config, 0}, }; int cmd_submodule__helper(int argc, const char **argv, const char *prefix) diff --git a/builtin/tag.c b/builtin/tag.c index f623632186..02f6bd1279 100644 --- a/builtin/tag.c +++ b/builtin/tag.c @@ -338,6 +338,8 @@ static int parse_msg_arg(const struct option *opt, const char *arg, int unset) { struct msg_arg *msg = opt->value; + BUG_ON_OPT_NEG(unset); + if (!arg) return -1; if (msg->buf.len) @@ -390,8 +392,8 @@ int cmd_tag(int argc, const char **argv, const char *prefix) OPT_GROUP(N_("Tag creation options")), OPT_BOOL('a', "annotate", &annotate, N_("annotated tag, needs a message")), - OPT_CALLBACK('m', "message", &msg, N_("message"), - N_("tag message"), parse_msg_arg), + { OPTION_CALLBACK, 'm', "message", &msg, N_("message"), + N_("tag message"), PARSE_OPT_NONEG, parse_msg_arg }, OPT_FILENAME('F', "file", &msgfile, N_("read message from file")), OPT_BOOL('e', "edit", &edit_flag, N_("force edit of tag message")), OPT_BOOL('s', "sign", &opt.sign, N_("annotated and GPG-signed tag")), diff --git a/builtin/update-index.c b/builtin/update-index.c index 07c10bcb7d..31e7cce301 100644 --- a/builtin/update-index.c +++ b/builtin/update-index.c @@ -782,7 +782,7 @@ struct refresh_params { static int refresh(struct refresh_params *o, unsigned int flag) { setup_work_tree(); - read_cache_preload(NULL); + read_cache(); *o->has_errors |= refresh_cache(o->flags | flag); return 0; } @@ -790,12 +790,16 @@ static int refresh(struct refresh_params *o, unsigned int flag) static int refresh_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); return refresh(opt->value, 0); } static int really_refresh_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); return refresh(opt->value, REFRESH_REALLY); } @@ -803,6 +807,7 @@ static int chmod_callback(const struct option *opt, const char *arg, int unset) { char *flip = opt->value; + BUG_ON_OPT_NEG(unset); if ((arg[0] != '-' && arg[0] != '+') || arg[1] != 'x' || arg[2]) return error("option 'chmod' expects \"+x\" or \"-x\""); *flip = arg[0]; @@ -812,6 +817,8 @@ static int chmod_callback(const struct option *opt, static int resolve_undo_clear_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); + BUG_ON_OPT_ARG(arg); resolve_undo_clear(); return 0; } @@ -847,6 +854,8 @@ static int cacheinfo_callback(struct parse_opt_ctx_t *ctx, unsigned int mode; const char *path; + BUG_ON_OPT_NEG(unset); + if (!parse_new_style_cacheinfo(ctx->argv[1], &mode, &oid, &path)) { if (add_cacheinfo(mode, &oid, path, 0)) die("git update-index: --cacheinfo cannot add %s", path); @@ -869,6 +878,8 @@ static int stdin_cacheinfo_callback(struct parse_opt_ctx_t *ctx, { int *nul_term_line = opt->value; + BUG_ON_OPT_NEG(unset); + if (ctx->argc != 1) return error("option '%s' must be the last argument", opt->long_name); allow_add = allow_replace = allow_remove = 1; @@ -881,6 +892,8 @@ static int stdin_callback(struct parse_opt_ctx_t *ctx, { int *read_from_stdin = opt->value; + BUG_ON_OPT_NEG(unset); + if (ctx->argc != 1) return error("option '%s' must be the last argument", opt->long_name); *read_from_stdin = 1; @@ -888,11 +901,13 @@ static int stdin_callback(struct parse_opt_ctx_t *ctx, } static int unresolve_callback(struct parse_opt_ctx_t *ctx, - const struct option *opt, int flags) + const struct option *opt, int unset) { int *has_errors = opt->value; const char *prefix = startup_info->prefix; + BUG_ON_OPT_NEG(unset); + /* consume remaining arguments. */ *has_errors = do_unresolve(ctx->argc, ctx->argv, prefix, prefix ? strlen(prefix) : 0); @@ -905,11 +920,13 @@ static int unresolve_callback(struct parse_opt_ctx_t *ctx, } static int reupdate_callback(struct parse_opt_ctx_t *ctx, - const struct option *opt, int flags) + const struct option *opt, int unset) { int *has_errors = opt->value; const char *prefix = startup_info->prefix; + BUG_ON_OPT_NEG(unset); + /* consume remaining arguments. */ setup_work_tree(); *has_errors = do_reupdate(ctx->argc, ctx->argv, diff --git a/builtin/worktree.c b/builtin/worktree.c index c4abbde2b8..5e84026177 100644 --- a/builtin/worktree.c +++ b/builtin/worktree.c @@ -245,7 +245,7 @@ static void validate_worktree_add(const char *path, const struct add_opts *opts) if (!wt) goto done; - locked = !!is_worktree_locked(wt); + locked = !!worktree_lock_reason(wt); if ((!locked && opts->force) || (locked && opts->force > 1)) { if (delete_git_dir(wt->id)) die(_("unable to re-add worktree '%s'"), path); @@ -682,7 +682,7 @@ static int lock_worktree(int ac, const char **av, const char *prefix) if (is_main_worktree(wt)) die(_("The main working tree cannot be locked or unlocked")); - old_reason = is_worktree_locked(wt); + old_reason = worktree_lock_reason(wt); if (old_reason) { if (*old_reason) die(_("'%s' is already locked, reason: %s"), @@ -714,7 +714,7 @@ static int unlock_worktree(int ac, const char **av, const char *prefix) die(_("'%s' is not a working tree"), av[0]); if (is_main_worktree(wt)) die(_("The main working tree cannot be locked or unlocked")); - if (!is_worktree_locked(wt)) + if (!worktree_lock_reason(wt)) die(_("'%s' is not locked"), av[0]); ret = unlink_or_warn(git_common_path("worktrees/%s/locked", wt->id)); free_worktrees(worktrees); @@ -787,7 +787,7 @@ static int move_worktree(int ac, const char **av, const char *prefix) validate_no_submodules(wt); if (force < 2) - reason = is_worktree_locked(wt); + reason = worktree_lock_reason(wt); if (reason) { if (*reason) die(_("cannot move a locked working tree, lock reason: %s\nuse 'move -f -f' to override or unlock first"), @@ -900,7 +900,7 @@ static int remove_worktree(int ac, const char **av, const char *prefix) if (is_main_worktree(wt)) die(_("'%s' is a main working tree"), av[0]); if (force < 2) - reason = is_worktree_locked(wt); + reason = worktree_lock_reason(wt); if (reason) { if (*reason) die(_("cannot remove a locked working tree, lock reason: %s\nuse 'remove -f -f' to override or unlock first"), @@ -486,6 +486,8 @@ static inline enum object_type object_type(unsigned int mode) #define INFOATTRIBUTES_FILE "info/attributes" #define ATTRIBUTE_MACRO_PREFIX "[attr]" #define GITMODULES_FILE ".gitmodules" +#define GITMODULES_INDEX ":.gitmodules" +#define GITMODULES_HEAD "HEAD:.gitmodules" #define GIT_NOTES_REF_ENVIRONMENT "GIT_NOTES_REF" #define GIT_NOTES_DEFAULT_REF "refs/notes/commits" #define GIT_NOTES_DISPLAY_REF_ENVIRONMENT "GIT_NOTES_DISPLAY_REF" @@ -659,6 +661,9 @@ extern int daemonize(void); /* Initialize and use the cache information */ struct lock_file; extern int read_index(struct index_state *); +extern void preload_index(struct index_state *index, + const struct pathspec *pathspec, + unsigned int refresh_flags); extern int read_index_preload(struct index_state *, const struct pathspec *pathspec, unsigned int refresh_flags); @@ -906,14 +911,6 @@ int use_optional_locks(void); extern char comment_line_char; extern int auto_comment_line_char; -/* Windows only */ -enum hide_dotfiles_type { - HIDE_DOTFILES_FALSE = 0, - HIDE_DOTFILES_TRUE, - HIDE_DOTFILES_DOTGITONLY -}; -extern enum hide_dotfiles_type hide_dotfiles; - enum log_refs_config { LOG_REFS_UNSET = -1, LOG_REFS_NONE = 0, @@ -962,11 +959,13 @@ extern int grafts_replace_parents; extern int repository_format_precious_objects; extern char *repository_format_partial_clone; extern const char *core_partial_clone_filter_default; +extern int repository_format_worktree_config; struct repository_format { int version; int precious_objects; char *partial_clone; /* value of extensions.partialclone */ + int worktree_config; int is_bare; int hash_algo; char *work_tree; diff --git a/ci/install-dependencies.sh b/ci/install-dependencies.sh index 75a9fd2475..06c3546e1e 100755 --- a/ci/install-dependencies.sh +++ b/ci/install-dependencies.sh @@ -10,6 +10,15 @@ LFSWHENCE=https://github.com/github/git-lfs/releases/download/v$LINUX_GIT_LFS_VE case "$jobname" in linux-clang|linux-gcc) + sudo apt-add-repository -y "ppa:ubuntu-toolchain-r/test" + sudo apt-get -q update + sudo apt-get -q -y install language-pack-is git-svn apache2 + case "$jobname" in + linux-gcc) + sudo apt-get -q -y install gcc-8 + ;; + esac + mkdir --parents "$P4_PATH" pushd "$P4_PATH" wget --quiet "$P4WHENCE/bin.linux26x86_64/p4d" @@ -32,11 +41,25 @@ osx-clang|osx-gcc) brew link --force gettext brew install caskroom/cask/perforce ;; +StaticAnalysis) + sudo apt-get -q update + sudo apt-get -q -y install coccinelle + ;; +Documentation) + sudo apt-get -q update + sudo apt-get -q -y install asciidoc xmlto + ;; esac -echo "$(tput setaf 6)Perforce Server Version$(tput sgr0)" -p4d -V | grep Rev. -echo "$(tput setaf 6)Perforce Client Version$(tput sgr0)" -p4 -V | grep Rev. -echo "$(tput setaf 6)Git-LFS Version$(tput sgr0)" -git-lfs version +if type p4d >/dev/null && type p4 >/dev/null +then + echo "$(tput setaf 6)Perforce Server Version$(tput sgr0)" + p4d -V | grep Rev. + echo "$(tput setaf 6)Perforce Client Version$(tput sgr0)" + p4 -V | grep Rev. +fi +if type git-lfs >/dev/null +then + echo "$(tput setaf 6)Git-LFS Version$(tput sgr0)" + git-lfs version +fi diff --git a/combine-diff.c b/combine-diff.c index 10155e0ec8..ad7752ea6b 100644 --- a/combine-diff.c +++ b/combine-diff.c @@ -345,38 +345,43 @@ struct combine_diff_state { struct sline *lost_bucket; }; -static void consume_line(void *state_, char *line, unsigned long len) +static void consume_hunk(void *state_, + long ob, long on, + long nb, long nn, + const char *funcline, long funclen) { struct combine_diff_state *state = state_; - if (5 < len && !memcmp("@@ -", line, 4)) { - if (parse_hunk_header(line, len, - &state->ob, &state->on, - &state->nb, &state->nn)) - return; - state->lno = state->nb; - if (state->nn == 0) { - /* @@ -X,Y +N,0 @@ removed Y lines - * that would have come *after* line N - * in the result. Our lost buckets hang - * to the line after the removed lines, - * - * Note that this is correct even when N == 0, - * in which case the hunk removes the first - * line in the file. - */ - state->lost_bucket = &state->sline[state->nb]; - if (!state->nb) - state->nb = 1; - } else { - state->lost_bucket = &state->sline[state->nb-1]; - } - if (!state->sline[state->nb-1].p_lno) - state->sline[state->nb-1].p_lno = - xcalloc(state->num_parent, - sizeof(unsigned long)); - state->sline[state->nb-1].p_lno[state->n] = state->ob; - return; + + state->ob = ob; + state->on = on; + state->nb = nb; + state->nn = nn; + state->lno = state->nb; + if (state->nn == 0) { + /* @@ -X,Y +N,0 @@ removed Y lines + * that would have come *after* line N + * in the result. Our lost buckets hang + * to the line after the removed lines, + * + * Note that this is correct even when N == 0, + * in which case the hunk removes the first + * line in the file. + */ + state->lost_bucket = &state->sline[state->nb]; + if (!state->nb) + state->nb = 1; + } else { + state->lost_bucket = &state->sline[state->nb-1]; } + if (!state->sline[state->nb-1].p_lno) + state->sline[state->nb-1].p_lno = + xcalloc(state->num_parent, sizeof(unsigned long)); + state->sline[state->nb-1].p_lno[state->n] = state->ob; +} + +static void consume_line(void *state_, char *line, unsigned long len) +{ + struct combine_diff_state *state = state_; if (!state->lost_bucket) return; /* not in any hunk yet */ switch (line[0]) { @@ -421,8 +426,8 @@ static void combine_diff(struct repository *r, state.num_parent = num_parent; state.n = n; - if (xdi_diff_outf(&parent_file, result_file, consume_line, &state, - &xpp, &xecfg)) + if (xdi_diff_outf(&parent_file, result_file, consume_hunk, + consume_line, &state, &xpp, &xecfg)) die("unable to generate combined diff for %s", oid_to_hex(parent)); free(parent_file.ptr); diff --git a/commit-reach.c b/commit-reach.c index a9da65c462..d5a39defd3 100644 --- a/commit-reach.c +++ b/commit-reach.c @@ -690,3 +690,72 @@ int can_all_from_reach(struct commit_list *from, struct commit_list *to, object_array_clear(&from_objs); return result; } + +struct commit_list *get_reachable_subset(struct commit **from, int nr_from, + struct commit **to, int nr_to, + unsigned int reachable_flag) +{ + struct commit **item; + struct commit *current; + struct commit_list *found_commits = NULL; + struct commit **to_last = to + nr_to; + struct commit **from_last = from + nr_from; + uint32_t min_generation = GENERATION_NUMBER_INFINITY; + int num_to_find = 0; + + struct prio_queue queue = { compare_commits_by_gen_then_commit_date }; + + for (item = to; item < to_last; item++) { + struct commit *c = *item; + + parse_commit(c); + if (c->generation < min_generation) + min_generation = c->generation; + + if (!(c->object.flags & PARENT1)) { + c->object.flags |= PARENT1; + num_to_find++; + } + } + + for (item = from; item < from_last; item++) { + struct commit *c = *item; + if (!(c->object.flags & PARENT2)) { + c->object.flags |= PARENT2; + parse_commit(c); + + prio_queue_put(&queue, *item); + } + } + + while (num_to_find && (current = prio_queue_get(&queue)) != NULL) { + struct commit_list *parents; + + if (current->object.flags & PARENT1) { + current->object.flags &= ~PARENT1; + current->object.flags |= reachable_flag; + commit_list_insert(current, &found_commits); + num_to_find--; + } + + for (parents = current->parents; parents; parents = parents->next) { + struct commit *p = parents->item; + + parse_commit(p); + + if (p->generation < min_generation) + continue; + + if (p->object.flags & PARENT2) + continue; + + p->object.flags |= PARENT2; + prio_queue_put(&queue, p); + } + } + + clear_commit_marks_many(nr_to, to, PARENT1); + clear_commit_marks_many(nr_from, from, PARENT2); + + return found_commits; +} diff --git a/commit-reach.h b/commit-reach.h index 7a65f55e59..fb8082a2ec 100644 --- a/commit-reach.h +++ b/commit-reach.h @@ -75,4 +75,17 @@ int can_all_from_reach_with_flag(struct object_array *from, int can_all_from_reach(struct commit_list *from, struct commit_list *to, int commit_date_cutoff); + +/* + * Return a list of commits containing the commits in the 'to' array + * that are reachable from at least one commit in the 'from' array. + * Also add the given 'flag' to each of the commits in the returned list. + * + * This method uses the PARENT1 and PARENT2 flags during its operation, + * so be sure these flags are not set before calling the method. + */ +struct commit_list *get_reachable_subset(struct commit **from, int nr_from, + struct commit **to, int nr_to, + unsigned int reachable_flag); + #endif @@ -657,11 +657,10 @@ struct commit *pop_commit(struct commit_list **stack) /* count number of children that have not been emitted */ define_commit_slab(indegree_slab, int); -/* record author-date for each commit object */ define_commit_slab(author_date_slab, timestamp_t); -static void record_author_date(struct author_date_slab *author_date, - struct commit *commit) +void record_author_date(struct author_date_slab *author_date, + struct commit *commit) { const char *buffer = get_commit_buffer(commit, NULL); struct ident_split ident; @@ -686,8 +685,8 @@ fail_exit: unuse_commit_buffer(commit, buffer); } -static int compare_commits_by_author_date(const void *a_, const void *b_, - void *cb_data) +int compare_commits_by_author_date(const void *a_, const void *b_, + void *cb_data) { const struct commit *a = a_, *b = b_; struct author_date_slab *author_date = cb_data; @@ -1100,7 +1099,33 @@ int check_commit_signature(const struct commit *commit, struct signature_check * return ret; } +void verify_merge_signature(struct commit *commit, int verbosity) +{ + char hex[GIT_MAX_HEXSZ + 1]; + struct signature_check signature_check; + memset(&signature_check, 0, sizeof(signature_check)); + + check_commit_signature(commit, &signature_check); + + find_unique_abbrev_r(hex, &commit->object.oid, DEFAULT_ABBREV); + switch (signature_check.result) { + case 'G': + break; + case 'U': + die(_("Commit %s has an untrusted GPG signature, " + "allegedly by %s."), hex, signature_check.signer); + case 'B': + die(_("Commit %s has a bad GPG signature " + "allegedly by %s."), hex, signature_check.signer); + default: /* 'N' */ + die(_("Commit %s does not have a GPG signature."), hex); + } + if (verbosity >= 0 && signature_check.result == 'G') + printf(_("Commit %s has a good GPG signature by %s\n"), + hex, signature_check.signer); + signature_check_clear(&signature_check); +} void append_merge_tag_headers(struct commit_list *parents, struct commit_extra_header ***tail) @@ -8,6 +8,7 @@ #include "gpg-interface.h" #include "string-list.h" #include "pretty.h" +#include "commit-slab.h" #define COMMIT_NOT_FROM_GRAPH 0xFFFFFFFF #define GENERATION_NUMBER_INFINITY 0xFFFFFFFF @@ -333,6 +334,20 @@ extern int remove_signature(struct strbuf *buf); */ extern int check_commit_signature(const struct commit *commit, struct signature_check *sigc); +/* record author-date for each commit object */ +struct author_date_slab; +void record_author_date(struct author_date_slab *author_date, + struct commit *commit); + +int compare_commits_by_author_date(const void *a_, const void *b_, void *unused); + +/* + * Verify a single commit with check_commit_signature() and die() if it is not + * a good signature. This isn't really suitable for general use, but is a + * helper to implement consistent logic for pull/merge --verify-signatures. + */ +void verify_merge_signature(struct commit *commit, int verbose); + int compare_commits_by_commit_date(const void *a_, const void *b_, void *unused); int compare_commits_by_gen_then_commit_date(const void *a_, const void *b_, void *unused); diff --git a/compat/mingw.c b/compat/mingw.c index 3b44dd99d7..d2f4fabb44 100644 --- a/compat/mingw.c +++ b/compat/mingw.c @@ -6,6 +6,7 @@ #include "../run-command.h" #include "../cache.h" #include "win32/lazyload.h" +#include "../config.h" #define HCAST(type, handle) ((type)(intptr_t)handle) @@ -203,6 +204,35 @@ static int ask_yes_no_if_possible(const char *format, ...) } } +/* Windows only */ +enum hide_dotfiles_type { + HIDE_DOTFILES_FALSE = 0, + HIDE_DOTFILES_TRUE, + HIDE_DOTFILES_DOTGITONLY +}; + +static enum hide_dotfiles_type hide_dotfiles = HIDE_DOTFILES_DOTGITONLY; +static char *unset_environment_variables; + +int mingw_core_config(const char *var, const char *value, void *cb) +{ + if (!strcmp(var, "core.hidedotfiles")) { + if (value && !strcasecmp(value, "dotgitonly")) + hide_dotfiles = HIDE_DOTFILES_DOTGITONLY; + else + hide_dotfiles = git_config_bool(var, value); + return 0; + } + + if (!strcmp(var, "core.unsetenvvars")) { + free(unset_environment_variables); + unset_environment_variables = xstrdup(value); + return 0; + } + + return 0; +} + /* Normalizes NT paths as returned by some low-level APIs. */ static wchar_t *normalize_ntpath(wchar_t *wbuf) { @@ -1141,44 +1171,142 @@ static char *path_lookup(const char *cmd, int exe_only) return prog; } -static int do_putenv(char **env, const char *name, int size, int free_old); +static const wchar_t *wcschrnul(const wchar_t *s, wchar_t c) +{ + while (*s && *s != c) + s++; + return s; +} + +/* Compare only keys */ +static int wenvcmp(const void *a, const void *b) +{ + wchar_t *p = *(wchar_t **)a, *q = *(wchar_t **)b; + size_t p_len, q_len; -/* used number of elements of environ array, including terminating NULL */ -static int environ_size = 0; -/* allocated size of environ array, in bytes */ -static int environ_alloc = 0; + /* Find the keys */ + p_len = wcschrnul(p, L'=') - p; + q_len = wcschrnul(q, L'=') - q; + + /* If the length differs, include the shorter key's NUL */ + if (p_len < q_len) + p_len++; + else if (p_len > q_len) + p_len = q_len + 1; + + return _wcsnicmp(p, q, p_len); +} + +/* We need a stable sort to convert the environment between UTF-16 <-> UTF-8 */ +#ifndef INTERNAL_QSORT +#include "qsort.c" +#endif /* - * Create environment block suitable for CreateProcess. Merges current - * process environment and the supplied environment changes. + * Build an environment block combining the inherited environment + * merged with the given list of settings. + * + * Values of the form "KEY=VALUE" in deltaenv override inherited values. + * Values of the form "KEY" in deltaenv delete inherited values. + * + * Multiple entries in deltaenv for the same key are explicitly allowed. + * + * We return a contiguous block of UNICODE strings with a final trailing + * zero word. */ static wchar_t *make_environment_block(char **deltaenv) { - wchar_t *wenvblk = NULL; - char **tmpenv; - int i = 0, size = environ_size, wenvsz = 0, wenvpos = 0; + wchar_t *wenv = GetEnvironmentStringsW(), *wdeltaenv, *result, *p; + size_t wlen, s, delta_size, size; + + wchar_t **array = NULL; + size_t alloc = 0, nr = 0, i; + + size = 1; /* for extra NUL at the end */ + + /* If there is no deltaenv to apply, simply return a copy. */ + if (!deltaenv || !*deltaenv) { + for (p = wenv; p && *p; ) { + size_t s = wcslen(p) + 1; + size += s; + p += s; + } - while (deltaenv && deltaenv[i]) - i++; + ALLOC_ARRAY(result, size); + memcpy(result, wenv, size * sizeof(*wenv)); + FreeEnvironmentStringsW(wenv); + return result; + } - /* copy the environment, leaving space for changes */ - ALLOC_ARRAY(tmpenv, size + i); - memcpy(tmpenv, environ, size * sizeof(char*)); + /* + * If there is a deltaenv, let's accumulate all keys into `array`, + * sort them using the stable git_qsort() and then copy, skipping + * duplicate keys + */ + for (p = wenv; p && *p; ) { + ALLOC_GROW(array, nr + 1, alloc); + s = wcslen(p) + 1; + array[nr++] = p; + p += s; + size += s; + } - /* merge supplied environment changes into the temporary environment */ - for (i = 0; deltaenv && deltaenv[i]; i++) - size = do_putenv(tmpenv, deltaenv[i], size, 0); + /* (over-)assess size needed for wchar version of deltaenv */ + for (delta_size = 0, i = 0; deltaenv[i]; i++) + delta_size += strlen(deltaenv[i]) * 2 + 1; + ALLOC_ARRAY(wdeltaenv, delta_size); - /* create environment block from temporary environment */ - for (i = 0; tmpenv[i]; i++) { - size = 2 * strlen(tmpenv[i]) + 2; /* +2 for final \0 */ - ALLOC_GROW(wenvblk, (wenvpos + size) * sizeof(wchar_t), wenvsz); - wenvpos += xutftowcs(&wenvblk[wenvpos], tmpenv[i], size) + 1; + /* convert the deltaenv, appending to array */ + for (i = 0, p = wdeltaenv; deltaenv[i]; i++) { + ALLOC_GROW(array, nr + 1, alloc); + wlen = xutftowcs(p, deltaenv[i], wdeltaenv + delta_size - p); + array[nr++] = p; + p += wlen + 1; + } + + git_qsort(array, nr, sizeof(*array), wenvcmp); + ALLOC_ARRAY(result, size + delta_size); + + for (p = result, i = 0; i < nr; i++) { + /* Skip any duplicate keys; last one wins */ + while (i + 1 < nr && !wenvcmp(array + i, array + i + 1)) + i++; + + /* Skip "to delete" entry */ + if (!wcschr(array[i], L'=')) + continue; + + size = wcslen(array[i]) + 1; + memcpy(p, array[i], size * sizeof(*p)); + p += size; + } + *p = L'\0'; + + free(array); + free(wdeltaenv); + FreeEnvironmentStringsW(wenv); + return result; +} + +static void do_unset_environment_variables(void) +{ + static int done; + char *p = unset_environment_variables; + + if (done || !p) + return; + done = 1; + + for (;;) { + char *comma = strchr(p, ','); + + if (comma) + *comma = '\0'; + unsetenv(p); + if (!comma) + break; + p = comma + 1; } - /* add final \0 terminator */ - wenvblk[wenvpos] = 0; - free(tmpenv); - return wenvblk; } struct pinfo_t { @@ -1199,9 +1327,12 @@ static pid_t mingw_spawnve_fd(const char *cmd, const char **argv, char **deltaen wchar_t wcmd[MAX_PATH], wdir[MAX_PATH], *wargs, *wenvblk = NULL; unsigned flags = CREATE_UNICODE_ENVIRONMENT; BOOL ret; + HANDLE cons; + + do_unset_environment_variables(); /* Determine whether or not we are associated to a console */ - HANDLE cons = CreateFile("CONOUT$", GENERIC_WRITE, + cons = CreateFile("CONOUT$", GENERIC_WRITE, FILE_SHARE_WRITE, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); if (cons == INVALID_HANDLE_VALUE) { @@ -1420,87 +1551,83 @@ int mingw_kill(pid_t pid, int sig) } /* - * Compare environment entries by key (i.e. stopping at '=' or '\0'). + * UTF-8 versions of getenv(), putenv() and unsetenv(). + * Internally, they use the CRT's stock UNICODE routines + * to avoid data loss. */ -static int compareenv(const void *v1, const void *v2) +char *mingw_getenv(const char *name) { - const char *e1 = *(const char**)v1; - const char *e2 = *(const char**)v2; +#define GETENV_MAX_RETAIN 30 + static char *values[GETENV_MAX_RETAIN]; + static int value_counter; + int len_key, len_value; + wchar_t *w_key; + char *value; + wchar_t w_value[32768]; - for (;;) { - int c1 = *e1++; - int c2 = *e2++; - c1 = (c1 == '=') ? 0 : tolower(c1); - c2 = (c2 == '=') ? 0 : tolower(c2); - if (c1 > c2) - return 1; - if (c1 < c2) - return -1; - if (c1 == 0) - return 0; - } -} + if (!name || !*name) + return NULL; -static int bsearchenv(char **env, const char *name, size_t size) -{ - unsigned low = 0, high = size; - while (low < high) { - unsigned mid = low + ((high - low) >> 1); - int cmp = compareenv(&env[mid], &name); - if (cmp < 0) - low = mid + 1; - else if (cmp > 0) - high = mid; - else - return mid; + len_key = strlen(name) + 1; + /* We cannot use xcalloc() here because that uses getenv() itself */ + w_key = calloc(len_key, sizeof(wchar_t)); + if (!w_key) + die("Out of memory, (tried to allocate %u wchar_t's)", len_key); + xutftowcs(w_key, name, len_key); + len_value = GetEnvironmentVariableW(w_key, w_value, ARRAY_SIZE(w_value)); + if (!len_value && GetLastError() == ERROR_ENVVAR_NOT_FOUND) { + free(w_key); + return NULL; } - return ~low; /* not found, return 1's complement of insert position */ + free(w_key); + + len_value = len_value * 3 + 1; + /* We cannot use xcalloc() here because that uses getenv() itself */ + value = calloc(len_value, sizeof(char)); + if (!value) + die("Out of memory, (tried to allocate %u bytes)", len_value); + xwcstoutf(value, w_value, len_value); + + /* + * We return `value` which is an allocated value and the caller is NOT + * expecting to have to free it, so we keep a round-robin array, + * invalidating the buffer after GETENV_MAX_RETAIN getenv() calls. + */ + free(values[value_counter]); + values[value_counter++] = value; + if (value_counter >= ARRAY_SIZE(values)) + value_counter = 0; + + return value; } -/* - * If name contains '=', then sets the variable, otherwise it unsets it - * Size includes the terminating NULL. Env must have room for size + 1 entries - * (in case of insert). Returns the new size. Optionally frees removed entries. - */ -static int do_putenv(char **env, const char *name, int size, int free_old) +int mingw_putenv(const char *namevalue) { - int i = bsearchenv(env, name, size - 1); + int size; + wchar_t *wide, *equal; + BOOL result; - /* optionally free removed / replaced entry */ - if (i >= 0 && free_old) - free(env[i]); + if (!namevalue || !*namevalue) + return 0; - if (strchr(name, '=')) { - /* if new value ('key=value') is specified, insert or replace entry */ - if (i < 0) { - i = ~i; - memmove(&env[i + 1], &env[i], (size - i) * sizeof(char*)); - size++; - } - env[i] = (char*) name; - } else if (i >= 0) { - /* otherwise ('key') remove existing entry */ - size--; - memmove(&env[i], &env[i + 1], (size - i) * sizeof(char*)); + size = strlen(namevalue) * 2 + 1; + wide = calloc(size, sizeof(wchar_t)); + if (!wide) + die("Out of memory, (tried to allocate %u wchar_t's)", size); + xutftowcs(wide, namevalue, size); + equal = wcschr(wide, L'='); + if (!equal) + result = SetEnvironmentVariableW(wide, NULL); + else { + *equal = L'\0'; + result = SetEnvironmentVariableW(wide, equal + 1); } - return size; -} + free(wide); -char *mingw_getenv(const char *name) -{ - char *value; - int pos = bsearchenv(environ, name, environ_size - 1); - if (pos < 0) - return NULL; - value = strchr(environ[pos], '='); - return value ? &value[1] : NULL; -} + if (!result) + errno = err_win_to_posix(GetLastError()); -int mingw_putenv(const char *namevalue) -{ - ALLOC_GROW(environ, (environ_size + 1) * sizeof(char*), environ_alloc); - environ_size = do_putenv(environ, namevalue, environ_size, 1); - return 0; + return result ? 0 : -1; } /* @@ -2408,17 +2535,6 @@ void mingw_startup(void) maxlen = wcslen(wargv[0]); for (i = 1; i < argc; i++) maxlen = max(maxlen, wcslen(wargv[i])); - for (i = 0; wenv[i]; i++) - maxlen = max(maxlen, wcslen(wenv[i])); - - /* - * nedmalloc can't free CRT memory, allocate resizable environment - * list. Note that xmalloc / xmemdupz etc. call getenv, so we cannot - * use it while initializing the environment itself. - */ - environ_size = i + 1; - environ_alloc = alloc_nr(environ_size * sizeof(char*)); - environ = malloc_startup(environ_alloc); /* allocate buffer (wchar_t encodes to max 3 UTF-8 bytes) */ maxlen = 3 * maxlen + 1; @@ -2427,17 +2543,13 @@ void mingw_startup(void) /* convert command line arguments and environment to UTF-8 */ for (i = 0; i < argc; i++) __argv[i] = wcstoutfdup_startup(buffer, wargv[i], maxlen); - for (i = 0; wenv[i]; i++) - environ[i] = wcstoutfdup_startup(buffer, wenv[i], maxlen); - environ[i] = NULL; free(buffer); - /* sort environment for O(log n) getenv / putenv */ - qsort(environ, i, sizeof(char*), compareenv); - /* fix Windows specific environment settings */ setup_windows_environment(); + unset_environment_variables = xstrdup("PERL5LIB"); + /* initialize critical section for waitpid pinfo_t list */ InitializeCriticalSection(&pinfo_cs); diff --git a/compat/mingw.h b/compat/mingw.h index 4c14e30835..8c24ddaa3e 100644 --- a/compat/mingw.h +++ b/compat/mingw.h @@ -11,6 +11,9 @@ typedef _sigset_t sigset_t; #undef _POSIX_THREAD_SAFE_FUNCTIONS #endif +extern int mingw_core_config(const char *var, const char *value, void *cb); +#define platform_core_config mingw_core_config + /* * things that are not available in header files */ @@ -257,11 +260,35 @@ char *mingw_mktemp(char *template); char *mingw_getcwd(char *pointer, int len); #define getcwd mingw_getcwd +#ifdef NO_UNSETENV +#error "NO_UNSETENV is incompatible with the Windows-specific startup code!" +#endif + +/* + * We bind *env() routines (even the mingw_ ones) to private mingw_ versions. + * These talk to the CRT using UNICODE/wchar_t, but maintain the original + * narrow-char API. + * + * Note that the MSCRT maintains both ANSI (getenv()) and UNICODE (_wgetenv()) + * routines and stores both versions of each environment variable in parallel + * (and secretly updates both when you set one or the other), but it uses CP_ACP + * to do the conversion rather than CP_UTF8. + * + * Since everything in the git code base is UTF8, we define the mingw_ routines + * to access the CRT using the UNICODE routines and manually convert them to + * UTF8. This also avoids round-trip problems. + * + * This also helps with our linkage, since "_wenviron" is publicly exported + * from the CRT. But to access "_environ" we would have to statically link + * to the CRT (/MT). + * + * We require NO_SETENV (and let gitsetenv() call our mingw_putenv). + */ +#define getenv mingw_getenv +#define putenv mingw_putenv +#define unsetenv mingw_putenv char *mingw_getenv(const char *name); -#define getenv mingw_getenv -int mingw_putenv(const char *namevalue); -#define putenv mingw_putenv -#define unsetenv mingw_putenv +int mingw_putenv(const char *name); int mingw_gethostname(char *host, int namelen); #define gethostname mingw_gethostname @@ -406,6 +433,9 @@ int mingw_raise(int sig); int winansi_isatty(int fd); #define isatty winansi_isatty +int winansi_dup2(int oldfd, int newfd); +#define dup2 winansi_dup2 + void winansi_init(void); HANDLE winansi_get_osfhandle(int fd); diff --git a/compat/poll/poll.c b/compat/poll/poll.c index ad5dcde439..4459408c7d 100644 --- a/compat/poll/poll.c +++ b/compat/poll/poll.c @@ -18,6 +18,9 @@ You should have received a copy of the GNU General Public License along with this program; if not, see <http://www.gnu.org/licenses/>. */ +/* To bump the minimum Windows version to Windows Vista */ +#include "git-compat-util.h" + /* Tell gcc not to warn about the (nfd < 0) tests, below. */ #if (__GNUC__ == 4 && 3 <= __GNUC_MINOR__) || 4 < __GNUC__ # pragma GCC diagnostic ignored "-Wtype-limits" @@ -449,7 +452,8 @@ poll (struct pollfd *pfd, nfds_t nfd, int timeout) static HANDLE hEvent; WSANETWORKEVENTS ev; HANDLE h, handle_array[FD_SETSIZE + 2]; - DWORD ret, wait_timeout, nhandles, start = 0, elapsed, orig_timeout = 0; + DWORD ret, wait_timeout, nhandles, orig_timeout = 0; + ULONGLONG start = 0; fd_set rfds, wfds, xfds; BOOL poll_again; MSG msg; @@ -465,7 +469,7 @@ poll (struct pollfd *pfd, nfds_t nfd, int timeout) if (timeout != INFTIM) { orig_timeout = timeout; - start = GetTickCount(); + start = GetTickCount64(); } if (!hEvent) @@ -614,8 +618,8 @@ restart: if (!rc && orig_timeout && timeout != INFTIM) { - elapsed = GetTickCount() - start; - timeout = elapsed >= orig_timeout ? 0 : orig_timeout - elapsed; + ULONGLONG elapsed = GetTickCount64() - start; + timeout = elapsed >= orig_timeout ? 0 : (int)(orig_timeout - elapsed); } if (!rc && timeout) diff --git a/compat/winansi.c b/compat/winansi.c index a11a0f16d2..f4f08237f9 100644 --- a/compat/winansi.c +++ b/compat/winansi.c @@ -474,6 +474,18 @@ static void die_lasterr(const char *fmt, ...) va_end(params); } +#undef dup2 +int winansi_dup2(int oldfd, int newfd) +{ + int ret = dup2(oldfd, newfd); + + if (!ret && newfd >= 0 && newfd <= 2) + fd_is_interactive[newfd] = oldfd < 0 || oldfd > 2 ? + 0 : fd_is_interactive[oldfd]; + + return ret; +} + static HANDLE duplicate_handle(HANDLE hnd) { HANDLE hresult, hproc = GetCurrentProcess(); @@ -1093,7 +1093,7 @@ int git_config_color(char *dest, const char *var, const char *value) return 0; } -static int git_default_core_config(const char *var, const char *value) +static int git_default_core_config(const char *var, const char *value, void *cb) { /* This needs a better name */ if (!strcmp(var, "core.filemode")) { @@ -1344,14 +1344,6 @@ static int git_default_core_config(const char *var, const char *value) return 0; } - if (!strcmp(var, "core.hidedotfiles")) { - if (value && !strcasecmp(value, "dotgitonly")) - hide_dotfiles = HIDE_DOTFILES_DOTGITONLY; - else - hide_dotfiles = git_config_bool(var, value); - return 0; - } - if (!strcmp(var, "core.partialclonefilter")) { return git_config_string(&core_partial_clone_filter_default, var, value); @@ -1363,7 +1355,7 @@ static int git_default_core_config(const char *var, const char *value) } /* Add other config variables here and to Documentation/config.txt. */ - return 0; + return platform_core_config(var, value, cb); } static int git_default_i18n_config(const char *var, const char *value) @@ -1448,13 +1440,13 @@ static int git_default_mailmap_config(const char *var, const char *value) return 0; } -int git_default_config(const char *var, const char *value, void *dummy) +int git_default_config(const char *var, const char *value, void *cb) { if (starts_with(var, "core.")) - return git_default_core_config(var, value); + return git_default_core_config(var, value, cb); if (starts_with(var, "user.")) - return git_ident_config(var, value, dummy); + return git_ident_config(var, value, cb); if (starts_with(var, "i18n.")) return git_default_i18n_config(var, value); @@ -1695,6 +1687,17 @@ static int do_git_config_sequence(const struct config_options *opts, if (repo_config && !access_or_die(repo_config, R_OK, 0)) ret += git_config_from_file(fn, repo_config, data); + /* + * Note: this should have a new scope, CONFIG_SCOPE_WORKTREE. + * But let's not complicate things before it's actually needed. + */ + if (repository_format_worktree_config) { + char *path = git_pathdup("config.worktree"); + if (!access_or_die(path, R_OK, 0)) + ret += git_config_from_file(fn, path, data); + free(path); + } + current_parsing_scope = CONFIG_SCOPE_CMDLINE; if (git_config_from_parameters(fn, data) < 0) die(_("unable to parse command-line config")); diff --git a/config.mak.uname b/config.mak.uname index f179d7a1dc..3ee7da0e23 100644 --- a/config.mak.uname +++ b/config.mak.uname @@ -430,8 +430,6 @@ ifeq ($(uname_S),Minix) NO_NSEC = YesPlease NEEDS_LIBGEN = NEEDS_CRYPTO_WITH_SSL = YesPlease - NEEDS_IDN_WITH_CURL = YesPlease - NEEDS_SSL_WITH_CURL = YesPlease NEEDS_RESOLV = NO_HSTRERROR = YesPlease NO_MMAP = YesPlease @@ -457,7 +455,6 @@ ifeq ($(uname_S),NONSTOP_KERNEL) # Missdetected, hence commented out, see below. #NO_CURL = YesPlease # Added manually, see above. - NEEDS_SSL_WITH_CURL = YesPlease HAVE_LIBCHARSET_H = YesPlease HAVE_STRINGS_H = YesPlease NEEDS_LIBICONV = YesPlease diff --git a/configure.ac b/configure.ac index e11b7976ab..44e8c036b6 100644 --- a/configure.ac +++ b/configure.ac @@ -600,17 +600,14 @@ AC_CHECK_PROG([CURL_CONFIG], [curl-config], if test $CURL_CONFIG != no; then GIT_CONF_SUBST([CURL_CONFIG]) - if test -z "${NO_OPENSSL}"; then - AC_MSG_CHECKING([if Curl supports SSL]) - if test $(curl-config --features|grep SSL) = SSL; then - NEEDS_SSL_WITH_CURL=YesPlease - AC_MSG_RESULT([yes]) - else - NEEDS_SSL_WITH_CURL= - AC_MSG_RESULT([no]) - fi - GIT_CONF_SUBST([NEEDS_SSL_WITH_CURL]) + + if test -z "$CURL_CONFIG_OPTS"; then + CURL_CONFIG_OPTS="--libs" fi + + CURL_LDFLAGS=$($CURL_CONFIG $CURL_CONFIG_OPTS) + AC_MSG_NOTICE([Setting CURL_LDFLAGS to '$CURL_LDFLAGS']) + GIT_CONF_SUBST([CURL_LDFLAGS], [$CURL_LDFLAGS]) fi fi diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index e9647a103a..9e8ec95c3c 100644 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1521,13 +1521,9 @@ _git_fetch () __git_complete_remote_or_refspec } -__git_format_patch_options=" - --stdout --attach --no-attach --thread --thread= --no-thread - --numbered --start-number --numbered-files --keep-subject --signoff - --signature --no-signature --in-reply-to= --cc= --full-index --binary - --not --all --cover-letter --no-prefix --src-prefix= --dst-prefix= - --inline --suffix= --ignore-if-in-upstream --subject-prefix= - --output-directory --reroll-count --to= --quiet --notes +__git_format_patch_extra_options=" + --full-index --not --all --no-prefix --src-prefix= + --dst-prefix= --notes " _git_format_patch () @@ -1540,7 +1536,7 @@ _git_format_patch () return ;; --*) - __gitcomp "$__git_format_patch_options" + __gitcomp_builtin format-patch "$__git_format_patch_extra_options" return ;; esac @@ -2070,7 +2066,7 @@ _git_send_email () return ;; --*) - __gitcomp "--annotate --bcc --cc --cc-cmd --chain-reply-to + __gitcomp_builtin send-email "--annotate --bcc --cc --cc-cmd --chain-reply-to --compose --confirm= --dry-run --envelope-sender --from --identity --in-reply-to --no-chain-reply-to --no-signed-off-by-cc @@ -2079,7 +2075,7 @@ _git_send_email () --smtp-server-port --smtp-encryption= --smtp-user --subject --suppress-cc= --suppress-from --thread --to --validate --no-validate - $__git_format_patch_options" + $__git_format_patch_extra_options" return ;; esac @@ -887,20 +887,49 @@ static time_t update_tm(struct tm *tm, struct tm *now, time_t sec) return n; } +/* + * Do we have a pending number at the end, or when + * we see a new one? Let's assume it's a month day, + * as in "Dec 6, 1992" + */ +static void pending_number(struct tm *tm, int *num) +{ + int number = *num; + + if (number) { + *num = 0; + if (tm->tm_mday < 0 && number < 32) + tm->tm_mday = number; + else if (tm->tm_mon < 0 && number < 13) + tm->tm_mon = number-1; + else if (tm->tm_year < 0) { + if (number > 1969 && number < 2100) + tm->tm_year = number - 1900; + else if (number > 69 && number < 100) + tm->tm_year = number; + else if (number < 38) + tm->tm_year = 100 + number; + /* We screw up for number = 00 ? */ + } + } +} + static void date_now(struct tm *tm, struct tm *now, int *num) { + *num = 0; update_tm(tm, now, 0); } static void date_yesterday(struct tm *tm, struct tm *now, int *num) { + *num = 0; update_tm(tm, now, 24*60*60); } static void date_time(struct tm *tm, struct tm *now, int hour) { if (tm->tm_hour < hour) - date_yesterday(tm, now, NULL); + update_tm(tm, now, 24*60*60); tm->tm_hour = hour; tm->tm_min = 0; tm->tm_sec = 0; @@ -908,16 +937,19 @@ static void date_time(struct tm *tm, struct tm *now, int hour) static void date_midnight(struct tm *tm, struct tm *now, int *num) { + pending_number(tm, num); date_time(tm, now, 0); } static void date_noon(struct tm *tm, struct tm *now, int *num) { + pending_number(tm, num); date_time(tm, now, 12); } static void date_tea(struct tm *tm, struct tm *now, int *num) { + pending_number(tm, num); date_time(tm, now, 17); } @@ -953,6 +985,7 @@ static void date_never(struct tm *tm, struct tm *now, int *num) { time_t n = 0; localtime_r(&n, tm); + *num = 0; } static const struct special { @@ -1110,33 +1143,6 @@ static const char *approxidate_digit(const char *date, struct tm *tm, int *num, return end; } -/* - * Do we have a pending number at the end, or when - * we see a new one? Let's assume it's a month day, - * as in "Dec 6, 1992" - */ -static void pending_number(struct tm *tm, int *num) -{ - int number = *num; - - if (number) { - *num = 0; - if (tm->tm_mday < 0 && number < 32) - tm->tm_mday = number; - else if (tm->tm_mon < 0 && number < 13) - tm->tm_mon = number-1; - else if (tm->tm_year < 0) { - if (number > 1969 && number < 2100) - tm->tm_year = number - 1900; - else if (number > 69 && number < 100) - tm->tm_year = number; - else if (number < 38) - tm->tm_year = 100 + number; - /* We screw up for number = 00 ? */ - } - } -} - static timestamp_t approxidate_str(const char *date, const struct timeval *tv, int *error_ret) @@ -1912,19 +1912,17 @@ static int color_words_output_graph_prefix(struct diff_words_data *diff_words) } } -static void fn_out_diff_words_aux(void *priv, char *line, unsigned long len) +static void fn_out_diff_words_aux(void *priv, + long minus_first, long minus_len, + long plus_first, long plus_len, + const char *func, long funclen) { struct diff_words_data *diff_words = priv; struct diff_words_style *style = diff_words->style; - int minus_first, minus_len, plus_first, plus_len; const char *minus_begin, *minus_end, *plus_begin, *plus_end; struct diff_options *opt = diff_words->opt; const char *line_prefix; - if (line[0] != '@' || parse_hunk_header(line, len, - &minus_first, &minus_len, &plus_first, &plus_len)) - return; - assert(opt); line_prefix = diff_line_prefix(opt); @@ -2074,8 +2072,8 @@ static void diff_words_show(struct diff_words_data *diff_words) xpp.flags = 0; /* as only the hunk header will be parsed, we need a 0-context */ xecfg.ctxlen = 0; - if (xdi_diff_outf(&minus, &plus, fn_out_diff_words_aux, diff_words, - &xpp, &xecfg)) + if (xdi_diff_outf(&minus, &plus, fn_out_diff_words_aux, NULL, + diff_words, &xpp, &xecfg)) die("unable to generate word diff"); free(minus.ptr); free(plus.ptr); @@ -3130,6 +3128,15 @@ static int is_conflict_marker(const char *line, int marker_size, unsigned long l return 1; } +static void checkdiff_consume_hunk(void *priv, + long ob, long on, long nb, long nn, + const char *func, long funclen) + +{ + struct checkdiff_t *data = priv; + data->lineno = nb - 1; +} + static void checkdiff_consume(void *priv, char *line, unsigned long len) { struct checkdiff_t *data = priv; @@ -3165,12 +3172,6 @@ static void checkdiff_consume(void *priv, char *line, unsigned long len) data->o->file, set, reset, ws); } else if (line[0] == ' ') { data->lineno++; - } else if (line[0] == '@') { - char *plus = strchr(line, '+'); - if (plus) - data->lineno = strtol(plus, NULL, 10) - 1; - else - die("invalid diff"); } } @@ -3526,8 +3527,8 @@ static void builtin_diff(const char *name_a, xecfg.ctxlen = strtoul(v, NULL, 10); if (o->word_diff) init_diff_words_data(&ecbdata, o, one, two); - if (xdi_diff_outf(&mf1, &mf2, fn_out_consume, &ecbdata, - &xpp, &xecfg)) + if (xdi_diff_outf(&mf1, &mf2, NULL, fn_out_consume, + &ecbdata, &xpp, &xecfg)) die("unable to generate diff for %s", one->path); if (o->word_diff) free_diff_words_data(&ecbdata); @@ -3637,8 +3638,8 @@ static void builtin_diffstat(const char *name_a, const char *name_b, xpp.anchors_nr = o->anchors_nr; xecfg.ctxlen = o->context; xecfg.interhunkctxlen = o->interhunkcontext; - if (xdi_diff_outf(&mf1, &mf2, diffstat_consume, diffstat, - &xpp, &xecfg)) + if (xdi_diff_outf(&mf1, &mf2, discard_hunk_line, + diffstat_consume, diffstat, &xpp, &xecfg)) die("unable to generate diffstat for %s", one->path); } @@ -3686,7 +3687,8 @@ static void builtin_checkdiff(const char *name_a, const char *name_b, memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 1; /* at least one context line */ xpp.flags = 0; - if (xdi_diff_outf(&mf1, &mf2, checkdiff_consume, &data, + if (xdi_diff_outf(&mf1, &mf2, checkdiff_consume_hunk, + checkdiff_consume, &data, &xpp, &xecfg)) die("unable to generate checkdiff for %s", one->path); @@ -5666,10 +5668,6 @@ static void patch_id_consume(void *priv, char *line, unsigned long len) struct patch_id_t *data = priv; int new_len; - /* Ignore line numbers when computing the SHA1 of the patch */ - if (starts_with(line, "@@ -")) - return; - new_len = remove_space(line, len); git_SHA1_Update(data->ctx, line, new_len); @@ -5771,8 +5769,8 @@ static int diff_get_patch_id(struct diff_options *options, struct object_id *oid xpp.flags = 0; xecfg.ctxlen = 3; xecfg.flags = 0; - if (xdi_diff_outf(&mf1, &mf2, patch_id_consume, &data, - &xpp, &xecfg)) + if (xdi_diff_outf(&mf1, &mf2, discard_hunk_line, + patch_id_consume, &data, &xpp, &xecfg)) return error("unable to generate patch-id diff for %s", p->one->path); } diff --git a/diffcore-pickaxe.c b/diffcore-pickaxe.c index d2361e06a1..69fc55ea1e 100644 --- a/diffcore-pickaxe.c +++ b/diffcore-pickaxe.c @@ -62,7 +62,8 @@ static int diff_grep(mmfile_t *one, mmfile_t *two, ecbdata.hit = 0; xecfg.ctxlen = o->context; xecfg.interhunkctxlen = o->interhunkcontext; - if (xdi_diff_outf(one, two, diffgrep_consume, &ecbdata, &xpp, &xecfg)) + if (xdi_diff_outf(one, two, discard_hunk_line, diffgrep_consume, + &ecbdata, &xpp, &xecfg)) return 0; return ecbdata.hit; } @@ -281,8 +281,15 @@ static int match_attrs(const struct index_state *istate, const struct pathspec_item *item) { int i; + char *to_free = NULL; + + if (name[namelen]) + name = to_free = xmemdupz(name, namelen); git_check_attr(istate, name, item->attr_check); + + free(to_free); + for (i = 0; i < item->attr_match_nr; i++) { const char *value; int matched; diff --git a/environment.c b/environment.c index 3f3c8746c2..3465597707 100644 --- a/environment.c +++ b/environment.c @@ -33,6 +33,7 @@ int ref_paranoia = -1; int repository_format_precious_objects; char *repository_format_partial_clone; const char *core_partial_clone_filter_default; +int repository_format_worktree_config; const char *git_commit_encoding; const char *git_log_output_encoding; const char *apply_default_whitespace; @@ -71,7 +72,6 @@ int core_apply_sparse_checkout; int merge_log_config = -1; int precomposed_unicode = -1; /* see probe_utf8_pathname_composition() */ unsigned long pack_size_limit_cfg; -enum hide_dotfiles_type hide_dotfiles = HIDE_DOTFILES_DOTGITONLY; enum log_refs_config log_all_ref_updates = LOG_REFS_UNSET; #ifndef PROTECT_HFS_DEFAULT diff --git a/fetch-pack.c b/fetch-pack.c index b3ed7121bc..9691046e64 100644 --- a/fetch-pack.c +++ b/fetch-pack.c @@ -1248,6 +1248,18 @@ static int process_acks(struct fetch_negotiator *negotiator, reader->status != PACKET_READ_DELIM) die(_("error processing acks: %d"), reader->status); + /* + * If an "acknowledgments" section is sent, a packfile is sent if and + * only if "ready" was sent in this section. The other sections + * ("shallow-info" and "wanted-refs") are sent only if a packfile is + * sent. Therefore, a DELIM is expected if "ready" is sent, and a FLUSH + * otherwise. + */ + if (received_ready && reader->status != PACKET_READ_DELIM) + die(_("expected packfile to be sent after 'ready'")); + if (!received_ready && reader->status != PACKET_READ_FLUSH) + die(_("expected no other sections to be sent after no 'ready'")); + /* return 0 if no common, 1 if there are common, or 2 if ready */ return received_ready ? 2 : (received_ack ? 1 : 0); } diff --git a/generate-cmdlist.sh b/generate-cmdlist.sh index fa1e5475e8..709d67405b 100755 --- a/generate-cmdlist.sh +++ b/generate-cmdlist.sh @@ -80,7 +80,7 @@ print_config_list () { cat <<EOF static const char *config_name_list[] = { EOF - grep -h '^[a-zA-Z].*\..*::$' Documentation/*config.txt | + grep -h '^[a-zA-Z].*\..*::$' Documentation/*config.txt Documentation/config/*.txt | sed '/deprecated/d; s/::$//; s/, */\n/g' | sort | while read line diff --git a/git-compat-util.h b/git-compat-util.h index 96a3f86d8e..3a08d9916f 100644 --- a/git-compat-util.h +++ b/git-compat-util.h @@ -342,6 +342,14 @@ typedef uintmax_t timestamp_t; #define _PATH_DEFPATH "/usr/local/bin:/usr/bin:/bin" #endif +#ifndef platform_core_config +static inline int noop_core_config(const char *var, const char *value, void *cb) +{ + return 0; +} +#define platform_core_config noop_core_config +#endif + #ifndef has_dos_drive_prefix static inline int git_has_dos_drive_prefix(const char *path) { diff --git a/git-send-email.perl b/git-send-email.perl index dc7e738e9c..8eb63b5a2f 100755 --- a/git-send-email.perl +++ b/git-send-email.perl @@ -122,6 +122,11 @@ EOT exit(1); } +sub completion_helper { + print Git::command('format-patch', '--git-completion-helper'); + exit(0); +} + # most mail servers generate the Date: header, but not all... sub format_2822_time { my ($time) = @_; @@ -314,6 +319,7 @@ $SIG{INT} = \&signal_handler; # needing, first, from the command line: my $help; +my $git_completion_helper; my $rc = GetOptions("h" => \$help, "dump-aliases" => \$dump_aliases); usage() unless $rc; @@ -377,9 +383,11 @@ $rc = GetOptions( "no-xmailer" => sub {$use_xmailer = 0}, "batch-size=i" => \$batch_size, "relogin-delay=i" => \$relogin_delay, + "git-completion-helper" => \$git_completion_helper, ); usage() if $help; +completion_helper() if $git_completion_helper; unless ($rc) { usage(); } @@ -1848,7 +1856,7 @@ sub apply_transfer_encoding { my $from = shift; my $to = shift; - return $message if ($from eq $to and $from ne '7bit'); + return ($message, $to) if ($from eq $to and $from ne '7bit'); require MIME::QuotedPrint; require MIME::Base64; diff --git a/git-submodule.sh b/git-submodule.sh index c09eb3e03d..5e608f8bad 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -72,7 +72,7 @@ get_submodule_config () { value=$(git config submodule."$name"."$option") if test -z "$value" then - value=$(git config -f .gitmodules submodule."$name"."$option") + value=$(git submodule--helper config submodule."$name"."$option") fi printf '%s' "${value:-$default}" } @@ -164,6 +164,11 @@ cmd_add() shift done + if ! git submodule--helper config --check-writeable >/dev/null 2>&1 + then + die "$(eval_gettext "please make sure that the .gitmodules file is in the working tree")" + fi + if test -n "$reference_path" then is_absolute_path "$reference_path" || @@ -288,11 +293,11 @@ or you are unsure what this means choose another name with the '--name' option." git add --no-warn-embedded-repo $force "$sm_path" || die "$(eval_gettext "Failed to add submodule '\$sm_path'")" - git config -f .gitmodules submodule."$sm_name".path "$sm_path" && - git config -f .gitmodules submodule."$sm_name".url "$repo" && + git submodule--helper config submodule."$sm_name".path "$sm_path" && + git submodule--helper config submodule."$sm_name".url "$repo" && if test -n "$branch" then - git config -f .gitmodules submodule."$sm_name".branch "$branch" + git submodule--helper config submodule."$sm_name".branch "$branch" fi && git add --force .gitmodules || die "$(eval_gettext "Failed to register submodule '\$sm_path'")" @@ -1513,7 +1513,6 @@ static void show_line(struct grep_opt *opt, char *bol, char *eol, } } -#ifndef NO_PTHREADS int grep_use_locks; /* @@ -1539,11 +1538,6 @@ static inline void grep_attr_unlock(void) */ pthread_mutex_t grep_read_mutex; -#else -#define grep_attr_lock() -#define grep_attr_unlock() -#endif - static int match_funcname(struct grep_opt *opt, struct grep_source *gs, char *bol, char *eol) { xdemitconf_t *xecfg = opt->priv; @@ -229,7 +229,6 @@ int grep_source(struct grep_opt *opt, struct grep_source *gs); extern struct grep_opt *grep_opt_dup(const struct grep_opt *opt); extern int grep_threads_ok(const struct grep_opt *opt); -#ifndef NO_PTHREADS /* * Mutex used around access to the attributes machinery if * opt->use_threads. Must be initialized/destroyed by callers! @@ -250,9 +249,4 @@ static inline void grep_read_unlock(void) pthread_mutex_unlock(&grep_read_mutex); } -#else -#define grep_read_lock() -#define grep_read_unlock() -#endif - #endif @@ -176,9 +176,13 @@ cleanup_fail: return NULL; } -static void close_midx(struct multi_pack_index *m) +void close_midx(struct multi_pack_index *m) { uint32_t i; + + if (!m) + return; + munmap((unsigned char *)m->data, m->data_len); close(m->fd); m->fd = -1; @@ -186,7 +190,7 @@ static void close_midx(struct multi_pack_index *m) for (i = 0; i < m->num_packs; i++) { if (m->packs[i]) { close_pack(m->packs[i]); - free(m->packs); + free(m->packs[i]); } } FREE_AND_NULL(m->packs); @@ -331,9 +335,14 @@ int prepare_multi_pack_index_one(struct repository *r, const char *object_dir, i struct multi_pack_index *m; struct multi_pack_index *m_search; int config_value; + static int env_value = -1; - if (repo_config_get_bool(r, "core.multipackindex", &config_value) || - !config_value) + if (env_value < 0) + env_value = git_env_bool(GIT_TEST_MULTI_PACK_INDEX, 0); + + if (!env_value && + (repo_config_get_bool(r, "core.multipackindex", &config_value) || + !config_value)) return 0; for (m_search = r->objects->multi_pack_index; m_search; m_search = m_search->next) @@ -712,12 +721,18 @@ static size_t write_midx_object_offsets(struct hashfile *f, int large_offset_nee static size_t write_midx_large_offsets(struct hashfile *f, uint32_t nr_large_offset, struct pack_midx_entry *objects, uint32_t nr_objects) { - struct pack_midx_entry *list = objects; + struct pack_midx_entry *list = objects, *end = objects + nr_objects; size_t written = 0; while (nr_large_offset) { - struct pack_midx_entry *obj = list++; - uint64_t offset = obj->offset; + struct pack_midx_entry *obj; + uint64_t offset; + + if (list >= end) + BUG("too many large-offset objects"); + + obj = list++; + offset = obj->offset; if (!(offset >> 31)) continue; @@ -914,9 +929,14 @@ cleanup: return 0; } -void clear_midx_file(const char *object_dir) +void clear_midx_file(struct repository *r) { - char *midx = get_midx_filename(object_dir); + char *midx = get_midx_filename(r->objects->objectdir); + + if (r->objects && r->objects->multi_pack_index) { + close_midx(r->objects->multi_pack_index); + r->objects->multi_pack_index = NULL; + } if (remove_path(midx)) { UNLEAK(midx); @@ -6,6 +6,8 @@ struct object_id; struct pack_entry; +#define GIT_TEST_MULTI_PACK_INDEX "GIT_TEST_MULTI_PACK_INDEX" + struct multi_pack_index { struct multi_pack_index *next; @@ -45,7 +47,9 @@ int midx_contains_pack(struct multi_pack_index *m, const char *idx_name); int prepare_multi_pack_index_one(struct repository *r, const char *object_dir, int local); int write_midx_file(const char *object_dir); -void clear_midx_file(const char *object_dir); +void clear_midx_file(struct repository *r); int verify_midx_file(const char *object_dir); +void close_midx(struct multi_pack_index *m); + #endif diff --git a/name-hash.c b/name-hash.c index 1fcda73cb3..623ca6923a 100644 --- a/name-hash.c +++ b/name-hash.c @@ -7,6 +7,7 @@ */ #define NO_THE_INDEX_COMPATIBILITY_MACROS #include "cache.h" +#include "thread-utils.h" struct dir_entry { struct hashmap_entry ent; @@ -131,22 +132,6 @@ static int cache_entry_cmp(const void *unused_cmp_data, static int lazy_try_threaded = 1; static int lazy_nr_dir_threads; -#ifdef NO_PTHREADS - -static inline int lookup_lazy_params(struct index_state *istate) -{ - return 0; -} - -static inline void threaded_lazy_init_name_hash( - struct index_state *istate) -{ -} - -#else - -#include "thread-utils.h" - /* * Set a minimum number of cache_entries that we will handle per * thread and use that to decide how many threads to run (upto @@ -509,6 +494,7 @@ static inline void lazy_update_dir_ref_counts( static void threaded_lazy_init_name_hash( struct index_state *istate) { + int err; int nr_each; int k_start; int t; @@ -516,6 +502,9 @@ static void threaded_lazy_init_name_hash( struct lazy_dir_thread_data *td_dir; struct lazy_name_thread_data *td_name; + if (!HAVE_THREADS) + return; + k_start = 0; nr_each = DIV_ROUND_UP(istate->cache_nr, lazy_nr_dir_threads); @@ -538,8 +527,9 @@ static void threaded_lazy_init_name_hash( if (k_start > istate->cache_nr) k_start = istate->cache_nr; td_dir_t->k_end = k_start; - if (pthread_create(&td_dir_t->pthread, NULL, lazy_dir_thread_proc, td_dir_t)) - die("unable to create lazy_dir_thread"); + err = pthread_create(&td_dir_t->pthread, NULL, lazy_dir_thread_proc, td_dir_t); + if (err) + die(_("unable to create lazy_dir thread: %s"), strerror(err)); } for (t = 0; t < lazy_nr_dir_threads; t++) { struct lazy_dir_thread_data *td_dir_t = td_dir + t; @@ -559,13 +549,15 @@ static void threaded_lazy_init_name_hash( */ td_name->istate = istate; td_name->lazy_entries = lazy_entries; - if (pthread_create(&td_name->pthread, NULL, lazy_name_thread_proc, td_name)) - die("unable to create lazy_name_thread"); + err = pthread_create(&td_name->pthread, NULL, lazy_name_thread_proc, td_name); + if (err) + die(_("unable to create lazy_name thread: %s"), strerror(err)); lazy_update_dir_ref_counts(istate, lazy_entries); - if (pthread_join(td_name->pthread, NULL)) - die("unable to join lazy_name_thread"); + err = pthread_join(td_name->pthread, NULL); + if (err) + die(_("unable to join lazy_name thread: %s"), strerror(err)); cleanup_dir_mutex(); @@ -574,8 +566,6 @@ static void threaded_lazy_init_name_hash( free(lazy_entries); } -#endif - static void lazy_init_name_hash(struct index_state *istate) { @@ -59,7 +59,7 @@ struct object_array { /* * object flag allocation: - * revision.h: 0---------10 2526 + * revision.h: 0---------10 25----28 * fetch-pack.c: 01 * negotiator/default.c: 2--5 * walker.c: 0-2 @@ -78,7 +78,7 @@ struct object_array { * builtin/show-branch.c: 0-------------------------------------------26 * builtin/unpack-objects.c: 2021 */ -#define FLAG_BITS 27 +#define FLAG_BITS 29 /* * The object type is stored in 3 bits. diff --git a/pack-objects.h b/pack-objects.h index 86ee93feb4..feb6a6a05e 100644 --- a/pack-objects.h +++ b/pack-objects.h @@ -145,9 +145,7 @@ struct packing_data { struct packed_git **in_pack_by_idx; struct packed_git **in_pack; -#ifndef NO_PTHREADS pthread_mutex_t lock; -#endif /* * This list contains entries for bases which we know the other side @@ -169,15 +167,11 @@ void prepare_packing_data(struct packing_data *pdata); static inline void packing_data_lock(struct packing_data *pdata) { -#ifndef NO_PTHREADS pthread_mutex_lock(&pdata->lock); -#endif } static inline void packing_data_unlock(struct packing_data *pdata) { -#ifndef NO_PTHREADS pthread_mutex_unlock(&pdata->lock); -#endif } struct object_entry *packlist_alloc(struct packing_data *pdata, diff --git a/packfile.c b/packfile.c index f2850a00b5..d1e6683ffe 100644 --- a/packfile.c +++ b/packfile.c @@ -345,6 +345,11 @@ void close_all_packs(struct raw_object_store *o) BUG("want to close pack marked 'do-not-close'"); else close_pack(p); + + if (o->multi_pack_index) { + close_midx(o->multi_pack_index); + o->multi_pack_index = NULL; + } } /* diff --git a/parse-options-cb.c b/parse-options-cb.c index e8236534ac..8c9edce52f 100644 --- a/parse-options-cb.c +++ b/parse-options-cb.c @@ -28,13 +28,6 @@ int parse_opt_abbrev_cb(const struct option *opt, const char *arg, int unset) return 0; } -int parse_opt_approxidate_cb(const struct option *opt, const char *arg, - int unset) -{ - *(timestamp_t *)(opt->value) = approxidate(arg); - return 0; -} - int parse_opt_expiry_date_cb(const struct option *opt, const char *arg, int unset) { @@ -65,6 +58,8 @@ int parse_opt_verbosity_cb(const struct option *opt, const char *arg, { int *target = opt->value; + BUG_ON_OPT_ARG(arg); + if (unset) /* --no-quiet, --no-verbose */ *target = 0; @@ -87,6 +82,8 @@ int parse_opt_commits(const struct option *opt, const char *arg, int unset) struct object_id oid; struct commit *commit; + BUG_ON_OPT_NEG(unset); + if (!arg) return -1; if (get_oid(arg, &oid)) @@ -117,6 +114,9 @@ int parse_opt_object_name(const struct option *opt, const char *arg, int unset) int parse_opt_tertiary(const struct option *opt, const char *arg, int unset) { int *target = opt->value; + + BUG_ON_OPT_ARG(arg); + *target = unset ? 2 : 1; return 0; } diff --git a/parse-options.h b/parse-options.h index dd14911a29..6c4fe2016d 100644 --- a/parse-options.h +++ b/parse-options.h @@ -150,9 +150,6 @@ struct option { (h), 0, &parse_opt_string_list } #define OPT_UYN(s, l, v, h) { OPTION_CALLBACK, (s), (l), (v), NULL, \ (h), PARSE_OPT_NOARG, &parse_opt_tertiary } -#define OPT_DATE(s, l, v, h) \ - { OPTION_CALLBACK, (s), (l), (v), N_("time"),(h), 0, \ - parse_opt_approxidate_cb } #define OPT_EXPIRY_DATE(s, l, v, h) \ { OPTION_CALLBACK, (s), (l), (v), N_("expiry-date"),(h), 0, \ parse_opt_expiry_date_cb } @@ -194,6 +191,20 @@ extern int opterror(const struct option *opt, const char *reason, int flags); #define opterror(o,r,f) (opterror((o),(r),(f)), const_error()) #endif +/* + * Use these assertions for callbacks that expect to be called with NONEG and + * NOARG respectively, and do not otherwise handle the "unset" and "arg" + * parameters. + */ +#define BUG_ON_OPT_NEG(unset) do { \ + if ((unset)) \ + BUG("option callback does not expect negation"); \ +} while (0) +#define BUG_ON_OPT_ARG(arg) do { \ + if ((arg)) \ + BUG("option callback does not expect an argument"); \ +} while (0) + /*----- incremental advanced APIs -----*/ enum { @@ -232,7 +243,6 @@ extern struct option *parse_options_concat(struct option *a, struct option *b); /*----- some often used options -----*/ extern int parse_opt_abbrev_cb(const struct option *, const char *, int); -extern int parse_opt_approxidate_cb(const struct option *, const char *, int); extern int parse_opt_expiry_date_cb(const struct option *, const char *, int); extern int parse_opt_color_flag_cb(const struct option *, const char *, int); extern int parse_opt_verbosity_cb(const struct option *, const char *, int); @@ -108,6 +108,7 @@ struct common_dir { static struct common_dir common_list[] = { { 0, 1, 0, "branches" }, + { 0, 1, 0, "common" }, { 0, 1, 0, "hooks" }, { 0, 1, 0, "info" }, { 0, 0, 1, "info/sparse-checkout" }, @@ -118,6 +119,7 @@ static struct common_dir common_list[] = { { 0, 1, 0, "objects" }, { 0, 1, 0, "refs" }, { 0, 1, 1, "refs/bisect" }, + { 0, 1, 1, "refs/worktree" }, { 0, 1, 0, "remotes" }, { 0, 1, 0, "worktrees" }, { 0, 1, 0, "rr-cache" }, diff --git a/preload-index.c b/preload-index.c index 9e7152ab14..c7dc3f2b9f 100644 --- a/preload-index.c +++ b/preload-index.c @@ -7,17 +7,7 @@ #include "fsmonitor.h" #include "config.h" #include "progress.h" - -#ifdef NO_PTHREADS -static void preload_index(struct index_state *index, - const struct pathspec *pathspec, - unsigned int refresh_flags) -{ - ; /* nothing */ -} -#else - -#include <pthread.h> +#include "thread-utils.h" /* * Mostly randomly chosen maximum thread counts: we @@ -100,15 +90,15 @@ static void *preload_thread(void *_data) return NULL; } -static void preload_index(struct index_state *index, - const struct pathspec *pathspec, - unsigned int refresh_flags) +void preload_index(struct index_state *index, + const struct pathspec *pathspec, + unsigned int refresh_flags) { int threads, i, work, offset; struct thread_data data[MAX_PARALLEL]; struct progress_data pd; - if (!core_preload_index) + if (!HAVE_THREADS || !core_preload_index) return; threads = index->cache_nr / THREAD_COST; @@ -131,6 +121,8 @@ static void preload_index(struct index_state *index, for (i = 0; i < threads; i++) { struct thread_data *p = data+i; + int err; + p->index = index; if (pathspec) copy_pathspec(&p->pathspec, pathspec); @@ -139,8 +131,10 @@ static void preload_index(struct index_state *index, if (pd.progress) p->progress = &pd; offset += work; - if (pthread_create(&p->pthread, NULL, preload_thread, p)) - die("unable to create threaded lstat"); + err = pthread_create(&p->pthread, NULL, preload_thread, p); + + if (err) + die(_("unable to create threaded lstat: %s"), strerror(err)); } for (i = 0; i < threads; i++) { struct thread_data *p = data+i; @@ -151,7 +145,6 @@ static void preload_index(struct index_state *index, trace_performance_leave("preload index"); } -#endif int read_index_preload(struct index_state *index, const struct pathspec *pathspec, diff --git a/prio-queue.c b/prio-queue.c index a078451872..d3f488cb05 100644 --- a/prio-queue.c +++ b/prio-queue.c @@ -85,3 +85,12 @@ void *prio_queue_get(struct prio_queue *queue) } return result; } + +void *prio_queue_peek(struct prio_queue *queue) +{ + if (!queue->nr) + return NULL; + if (!queue->compare) + return queue->array[queue->nr - 1].data; + return queue->array[0].data; +} diff --git a/prio-queue.h b/prio-queue.h index d030ec9dd6..682e51867a 100644 --- a/prio-queue.h +++ b/prio-queue.h @@ -46,6 +46,12 @@ extern void prio_queue_put(struct prio_queue *, void *thing); */ extern void *prio_queue_get(struct prio_queue *); +/* + * Gain access to the "thing" that would be returned by + * prio_queue_get, but do not remove it from the queue. + */ +extern void *prio_queue_peek(struct prio_queue *); + extern void clear_prio_queue(struct prio_queue *); /* Reverse the LIFO elements */ diff --git a/range-diff.c b/range-diff.c index bd8083f2d1..767af8c5bb 100644 --- a/range-diff.c +++ b/range-diff.c @@ -197,6 +197,12 @@ static void diffsize_consume(void *data, char *line, unsigned long len) (*(int *)data)++; } +static void diffsize_hunk(void *data, long ob, long on, long nb, long nn, + const char *funcline, long funclen) +{ + diffsize_consume(data, NULL, 0); +} + static int diffsize(const char *a, const char *b) { xpparam_t pp = { 0 }; @@ -210,7 +216,9 @@ static int diffsize(const char *a, const char *b) mf2.size = strlen(b); cfg.ctxlen = 3; - if (!xdi_diff_outf(&mf1, &mf2, diffsize_consume, &count, &pp, &cfg)) + if (!xdi_diff_outf(&mf1, &mf2, + diffsize_hunk, diffsize_consume, &count, + &pp, &cfg)) return count; error(_("failed to generate diff")); @@ -453,7 +461,8 @@ int show_range_diff(const char *range1, const char *range2, struct strbuf indent = STRBUF_INIT; memcpy(&opts, diffopt, sizeof(opts)); - opts.output_format = DIFF_FORMAT_PATCH; + if (!opts.output_format) + opts.output_format = DIFF_FORMAT_PATCH; opts.flags.suppress_diff_headers = 1; opts.flags.dual_color_diffed_diffs = dual_color; opts.output_prefix = output_prefix_cb; diff --git a/read-cache.c b/read-cache.c index f3a848d61c..4ca81286c0 100644 --- a/read-cache.c +++ b/read-cache.c @@ -1496,6 +1496,12 @@ int refresh_index(struct index_state *istate, unsigned int flags, typechange_fmt = (in_porcelain ? "T\t%s\n" : "%s needs update\n"); added_fmt = (in_porcelain ? "A\t%s\n" : "%s needs update\n"); unmerged_fmt = (in_porcelain ? "U\t%s\n" : "%s: needs merge\n"); + /* + * Use the multi-threaded preload_index() to refresh most of the + * cache entries quickly then in the single threaded loop below, + * we only have to do the special cases that are left. + */ + preload_index(istate, pathspec, 0); for (i = 0; i < istate->cache_nr; i++) { struct cache_entry *ce, *new_entry; int cache_errno = 0; @@ -1746,7 +1752,7 @@ static struct cache_entry *create_from_disk(struct mem_pool *ce_mem_pool, size_t len; const char *name; unsigned int flags; - size_t copy_len; + size_t copy_len = 0; /* * Adjacent cache entries tend to share the leading paths, so it makes * sense to only store the differences in later entries. In the v4 @@ -1786,8 +1792,6 @@ static struct cache_entry *create_from_disk(struct mem_pool *ce_mem_pool, die(_("malformed name field in the index, near path '%s'"), previous_ce->name); copy_len = previous_len - strip_len; - } else { - copy_len = 0; } name = (const char *)cp; } @@ -1920,19 +1924,15 @@ struct index_entry_offset_table struct index_entry_offset entries[FLEX_ARRAY]; }; -#ifndef NO_PTHREADS static struct index_entry_offset_table *read_ieot_extension(const char *mmap, size_t mmap_size, size_t offset); static void write_ieot_extension(struct strbuf *sb, struct index_entry_offset_table *ieot); -#endif static size_t read_eoie_extension(const char *mmap, size_t mmap_size); static void write_eoie_extension(struct strbuf *sb, git_hash_ctx *eoie_context, size_t offset); struct load_index_extensions { -#ifndef NO_PTHREADS pthread_t pthread; -#endif struct index_state *istate; const char *mmap; size_t mmap_size; @@ -2010,8 +2010,6 @@ static unsigned long load_all_cache_entries(struct index_state *istate, return consumed; } -#ifndef NO_PTHREADS - /* * Mostly randomly chosen maximum thread counts: we * cap the parallelism to online_cpus() threads, and we want @@ -2122,7 +2120,6 @@ static unsigned long load_cache_entries_threaded(struct index_state *istate, con return consumed; } -#endif /* remember to discard_cache() before reading a different cache! */ int do_read_index(struct index_state *istate, const char *path, int must_exist) @@ -2135,10 +2132,8 @@ int do_read_index(struct index_state *istate, const char *path, int must_exist) size_t mmap_size; struct load_index_extensions p; size_t extension_offset = 0; -#ifndef NO_PTHREADS int nr_threads, cpus; struct index_entry_offset_table *ieot = NULL; -#endif if (istate->initialized) return istate->cache_nr; @@ -2181,7 +2176,6 @@ int do_read_index(struct index_state *istate, const char *path, int must_exist) src_offset = sizeof(*hdr); -#ifndef NO_PTHREADS nr_threads = git_config_get_index_threads(); /* TODO: does creating more threads than cores help? */ @@ -2192,6 +2186,9 @@ int do_read_index(struct index_state *istate, const char *path, int must_exist) nr_threads = cpus; } + if (!HAVE_THREADS) + nr_threads = 1; + if (nr_threads > 1) { extension_offset = read_eoie_extension(mmap, mmap_size); if (extension_offset) { @@ -2219,22 +2216,16 @@ int do_read_index(struct index_state *istate, const char *path, int must_exist) } else { src_offset += load_all_cache_entries(istate, mmap, mmap_size, src_offset); } -#else - src_offset += load_all_cache_entries(istate, mmap, mmap_size, src_offset); -#endif istate->timestamp.sec = st.st_mtime; istate->timestamp.nsec = ST_MTIME_NSEC(st); /* if we created a thread, join it otherwise load the extensions on the primary thread */ -#ifndef NO_PTHREADS if (extension_offset) { int ret = pthread_join(p.pthread, NULL); if (ret) die(_("unable to join load_index_extensions thread: %s"), strerror(ret)); - } -#endif - if (!extension_offset) { + } else { p.src_offset = src_offset; load_index_extensions(&p); } @@ -2756,8 +2747,11 @@ static int do_write_index(struct index_state *istate, struct tempfile *tempfile, if (ce_write(&c, newfd, &hdr, sizeof(hdr)) < 0) return -1; -#ifndef NO_PTHREADS - nr_threads = git_config_get_index_threads(); + if (HAVE_THREADS) + nr_threads = git_config_get_index_threads(); + else + nr_threads = 1; + if (nr_threads != 1) { int ieot_blocks, cpus; @@ -2787,7 +2781,6 @@ static int do_write_index(struct index_state *istate, struct tempfile *tempfile, ieot_entries = DIV_ROUND_UP(entries, ieot_blocks); } } -#endif offset = lseek(newfd, 0, SEEK_CUR); if (offset < 0) { @@ -2871,7 +2864,6 @@ static int do_write_index(struct index_state *istate, struct tempfile *tempfile, * strip_extensions parameter as we need it when loading the shared * index. */ -#ifndef NO_PTHREADS if (ieot) { struct strbuf sb = STRBUF_INIT; @@ -2883,7 +2875,6 @@ static int do_write_index(struct index_state *istate, struct tempfile *tempfile, if (err) return -1; } -#endif if (!strip_extensions && istate->split_index) { struct strbuf sb = STRBUF_INIT; @@ -3469,7 +3460,6 @@ static void write_eoie_extension(struct strbuf *sb, git_hash_ctx *eoie_context, strbuf_add(sb, hash, the_hash_algo->rawsz); } -#ifndef NO_PTHREADS #define IEOT_VERSION (1) static struct index_entry_offset_table *read_ieot_extension(const char *mmap, size_t mmap_size, size_t offset) @@ -3542,4 +3532,3 @@ static void write_ieot_extension(struct strbuf *sb, struct index_entry_offset_ta strbuf_add(sb, &buffer, sizeof(uint32_t)); } } -#endif diff --git a/ref-filter.c b/ref-filter.c index 0c45ed9d94..7eca436223 100644 --- a/ref-filter.c +++ b/ref-filter.c @@ -2316,6 +2316,8 @@ int parse_opt_merge_filter(const struct option *opt, const char *arg, int unset) struct object_id oid; int no_merged = starts_with(opt->long_name, "no"); + BUG_ON_OPT_NEG(unset); + if (rf->merge) { if (no_merged) { return opterror(opt, "is incompatible with --merged", 0); @@ -217,6 +217,7 @@ char *resolve_refdup(const char *refname, int resolve_flags, /* The argument to filter_refs */ struct ref_filter { const char *pattern; + const char *prefix; each_ref_fn *fn; void *cb_data; }; @@ -296,6 +297,8 @@ static int filter_refs(const char *refname, const struct object_id *oid, if (wildmatch(filter->pattern, refname, 0)) return 0; + if (filter->prefix) + skip_prefix(refname, filter->prefix, &refname); return filter->fn(refname, oid, flags, filter->cb_data); } @@ -458,6 +461,7 @@ int for_each_glob_ref_in(each_ref_fn fn, const char *pattern, } filter.pattern = real_pattern.buf; + filter.prefix = prefix; filter.fn = fn; filter.cb_data = cb_data; ret = for_each_ref(filter_refs, &filter); @@ -624,6 +628,7 @@ int dwim_log(const char *str, int len, struct object_id *oid, char **log) static int is_per_worktree_ref(const char *refname) { return !strcmp(refname, "HEAD") || + starts_with(refname, "refs/worktree/") || starts_with(refname, "refs/bisect/") || starts_with(refname, "refs/rewritten/"); } @@ -640,13 +645,34 @@ static int is_pseudoref_syntax(const char *refname) return 1; } +static int is_main_pseudoref_syntax(const char *refname) +{ + return skip_prefix(refname, "main-worktree/", &refname) && + *refname && + is_pseudoref_syntax(refname); +} + +static int is_other_pseudoref_syntax(const char *refname) +{ + if (!skip_prefix(refname, "worktrees/", &refname)) + return 0; + refname = strchr(refname, '/'); + if (!refname || !refname[1]) + return 0; + return is_pseudoref_syntax(refname + 1); +} + enum ref_type ref_type(const char *refname) { if (is_per_worktree_ref(refname)) return REF_TYPE_PER_WORKTREE; if (is_pseudoref_syntax(refname)) return REF_TYPE_PSEUDOREF; - return REF_TYPE_NORMAL; + if (is_main_pseudoref_syntax(refname)) + return REF_TYPE_MAIN_PSEUDOREF; + if (is_other_pseudoref_syntax(refname)) + return REF_TYPE_OTHER_PSEUDOREF; + return REF_TYPE_NORMAL; } long get_files_ref_lock_timeout_ms(void) @@ -714,9 +714,11 @@ int parse_hide_refs_config(const char *var, const char *value, const char *); int ref_is_hidden(const char *, const char *); enum ref_type { - REF_TYPE_PER_WORKTREE, - REF_TYPE_PSEUDOREF, - REF_TYPE_NORMAL, + REF_TYPE_PER_WORKTREE, /* refs inside refs/ but not shared */ + REF_TYPE_PSEUDOREF, /* refs outside refs/ in current worktree */ + REF_TYPE_MAIN_PSEUDOREF, /* pseudo refs from the main worktree */ + REF_TYPE_OTHER_PSEUDOREF, /* pseudo refs from other worktrees */ + REF_TYPE_NORMAL, /* normal/shared refs inside refs/ */ }; enum ref_type ref_type(const char *refname); diff --git a/refs/files-backend.c b/refs/files-backend.c index 16ef9325e0..9183875dad 100644 --- a/refs/files-backend.c +++ b/refs/files-backend.c @@ -10,6 +10,7 @@ #include "../object.h" #include "../dir.h" #include "../chdir-notify.h" +#include "worktree.h" /* * This backend uses the following flags in `ref_update::flags` for @@ -149,6 +150,25 @@ static struct files_ref_store *files_downcast(struct ref_store *ref_store, return refs; } +static void files_reflog_path_other_worktrees(struct files_ref_store *refs, + struct strbuf *sb, + const char *refname) +{ + const char *real_ref; + const char *worktree_name; + int length; + + if (parse_worktree_ref(refname, &worktree_name, &length, &real_ref)) + BUG("refname %s is not a other-worktree ref", refname); + + if (worktree_name) + strbuf_addf(sb, "%s/worktrees/%.*s/logs/%s", refs->gitcommondir, + length, worktree_name, real_ref); + else + strbuf_addf(sb, "%s/logs/%s", refs->gitcommondir, + real_ref); +} + static void files_reflog_path(struct files_ref_store *refs, struct strbuf *sb, const char *refname) @@ -158,6 +178,9 @@ static void files_reflog_path(struct files_ref_store *refs, case REF_TYPE_PSEUDOREF: strbuf_addf(sb, "%s/logs/%s", refs->gitdir, refname); break; + case REF_TYPE_OTHER_PSEUDOREF: + case REF_TYPE_MAIN_PSEUDOREF: + return files_reflog_path_other_worktrees(refs, sb, refname); case REF_TYPE_NORMAL: strbuf_addf(sb, "%s/logs/%s", refs->gitcommondir, refname); break; @@ -176,6 +199,11 @@ static void files_ref_path(struct files_ref_store *refs, case REF_TYPE_PSEUDOREF: strbuf_addf(sb, "%s/%s", refs->gitdir, refname); break; + case REF_TYPE_MAIN_PSEUDOREF: + if (!skip_prefix(refname, "main-worktree/", &refname)) + BUG("ref %s is not a main pseudoref", refname); + /* fallthrough */ + case REF_TYPE_OTHER_PSEUDOREF: case REF_TYPE_NORMAL: strbuf_addf(sb, "%s/%s", refs->gitcommondir, refname); break; @@ -269,9 +297,9 @@ static void loose_fill_ref_dir(struct ref_store *ref_store, closedir(d); /* - * Manually add refs/bisect, which, being per-worktree, might - * not appear in the directory listing for refs/ in the main - * repo. + * Manually add refs/bisect and refs/worktree, which, being + * per-worktree, might not appear in the directory listing for + * refs/ in the main repo. */ if (!strcmp(dirname, "refs/")) { int pos = search_ref_dir(dir, "refs/bisect/", 12); @@ -281,6 +309,14 @@ static void loose_fill_ref_dir(struct ref_store *ref_store, dir->cache, "refs/bisect/", 12, 1); add_entry_to_dir(dir, child_entry); } + + pos = search_ref_dir(dir, "refs/worktree/", 11); + + if (pos < 0) { + struct ref_entry *child_entry = create_dir_entry( + dir->cache, "refs/worktree/", 11, 1); + add_entry_to_dir(dir, child_entry); + } } } @@ -1205,9 +1205,36 @@ static void add_missing_tags(struct ref *src, struct ref **dst, struct ref ***ds * sent to the other side. */ if (sent_tips.nr) { + const int reachable_flag = 1; + struct commit_list *found_commits; + struct commit **src_commits; + int nr_src_commits = 0, alloc_src_commits = 16; + ALLOC_ARRAY(src_commits, alloc_src_commits); + for_each_string_list_item(item, &src_tag) { struct ref *ref = item->util; + struct commit *commit; + + if (is_null_oid(&ref->new_oid)) + continue; + commit = lookup_commit_reference_gently(the_repository, + &ref->new_oid, + 1); + if (!commit) + /* not pushing a commit, which is not an error */ + continue; + + ALLOC_GROW(src_commits, nr_src_commits + 1, alloc_src_commits); + src_commits[nr_src_commits++] = commit; + } + + found_commits = get_reachable_subset(sent_tips.tip, sent_tips.nr, + src_commits, nr_src_commits, + reachable_flag); + + for_each_string_list_item(item, &src_tag) { struct ref *dst_ref; + struct ref *ref = item->util; struct commit *commit; if (is_null_oid(&ref->new_oid)) @@ -1223,7 +1250,7 @@ static void add_missing_tags(struct ref *src, struct ref **dst, struct ref ***ds * Is this tag, which they do not have, reachable from * any of the commits we are sending? */ - if (!in_merge_bases_many(commit, sent_tips.nr, sent_tips.tip)) + if (!(commit->object.flags & reachable_flag)) continue; /* Add it in */ @@ -1231,7 +1258,12 @@ static void add_missing_tags(struct ref *src, struct ref **dst, struct ref ***ds oidcpy(&dst_ref->new_oid, &ref->new_oid); dst_ref->peer_ref = copy_ref(ref); } + + clear_commit_marks_many(nr_src_commits, src_commits, reachable_flag); + free(src_commits); + free_commit_list(found_commits); } + string_list_clear(&src_tag, 0); free(sent_tips.tip); } diff --git a/revision.c b/revision.c index 28fb2a70cd..13e0519c02 100644 --- a/revision.c +++ b/revision.c @@ -25,6 +25,8 @@ #include "worktree.h" #include "argv-array.h" #include "commit-reach.h" +#include "commit-graph.h" +#include "prio-queue.h" volatile show_early_output_fn_t show_early_output; @@ -767,8 +769,8 @@ static void commit_list_insert_by_date_cached(struct commit *p, struct commit_li *cache = new_entry; } -static int add_parents_to_list(struct rev_info *revs, struct commit *commit, - struct commit_list **list, struct commit_list **cache_ptr) +static int process_parents(struct rev_info *revs, struct commit *commit, + struct commit_list **list, struct commit_list **cache_ptr) { struct commit_list *parent = commit->parents; unsigned left_flag; @@ -807,7 +809,8 @@ static int add_parents_to_list(struct rev_info *revs, struct commit *commit, if (p->object.flags & SEEN) continue; p->object.flags |= SEEN; - commit_list_insert_by_date_cached(p, list, cached_base, cache_ptr); + if (list) + commit_list_insert_by_date_cached(p, list, cached_base, cache_ptr); } return 0; } @@ -846,7 +849,8 @@ static int add_parents_to_list(struct rev_info *revs, struct commit *commit, p->object.flags |= left_flag; if (!(p->object.flags & SEEN)) { p->object.flags |= SEEN; - commit_list_insert_by_date_cached(p, list, cached_base, cache_ptr); + if (list) + commit_list_insert_by_date_cached(p, list, cached_base, cache_ptr); } if (revs->first_parent_only) break; @@ -1090,7 +1094,7 @@ static int limit_list(struct rev_info *revs) if (revs->max_age != -1 && (commit->date < revs->max_age)) obj->flags |= UNINTERESTING; - if (add_parents_to_list(revs, commit, &list, NULL) < 0) + if (process_parents(revs, commit, &list, NULL) < 0) return -1; if (obj->flags & UNINTERESTING) { mark_parents_uninteresting(commit); @@ -1177,7 +1181,7 @@ struct all_refs_cb { int warned_bad_reflog; struct rev_info *all_revs; const char *name_for_errormsg; - struct ref_store *refs; + struct worktree *wt; }; int ref_excluded(struct string_list *ref_excludes, const char *path) @@ -1214,7 +1218,7 @@ static void init_all_refs_cb(struct all_refs_cb *cb, struct rev_info *revs, cb->all_revs = revs; cb->all_flags = flags; revs->rev_input_given = 1; - cb->refs = NULL; + cb->wt = NULL; } void clear_ref_exclusion(struct string_list **ref_excludes_p) @@ -1277,14 +1281,20 @@ static int handle_one_reflog_ent(struct object_id *ooid, struct object_id *noid, return 0; } -static int handle_one_reflog(const char *path, const struct object_id *oid, +static int handle_one_reflog(const char *refname_in_wt, + const struct object_id *oid, int flag, void *cb_data) { struct all_refs_cb *cb = cb_data; + struct strbuf refname = STRBUF_INIT; + cb->warned_bad_reflog = 0; - cb->name_for_errormsg = path; - refs_for_each_reflog_ent(cb->refs, path, + strbuf_worktree_ref(cb->wt, &refname, refname_in_wt); + cb->name_for_errormsg = refname.buf; + refs_for_each_reflog_ent(get_main_ref_store(the_repository), + refname.buf, handle_one_reflog_ent, cb_data); + strbuf_release(&refname); return 0; } @@ -1299,8 +1309,8 @@ static void add_other_reflogs_to_pending(struct all_refs_cb *cb) if (wt->is_current) continue; - cb->refs = get_worktree_ref_store(wt); - refs_for_each_reflog(cb->refs, + cb->wt = wt; + refs_for_each_reflog(get_worktree_ref_store(wt), handle_one_reflog, cb); } @@ -1313,7 +1323,7 @@ void add_reflogs_to_pending(struct rev_info *revs, unsigned flags) cb.all_revs = revs; cb.all_flags = flags; - cb.refs = get_main_ref_store(revs->repo); + cb.wt = NULL; for_each_reflog(handle_one_reflog, &cb); if (!revs->single_worktree) @@ -1321,13 +1331,14 @@ void add_reflogs_to_pending(struct rev_info *revs, unsigned flags) } static void add_cache_tree(struct cache_tree *it, struct rev_info *revs, - struct strbuf *path) + struct strbuf *path, unsigned int flags) { size_t baselen = path->len; int i; if (it->entry_count >= 0) { struct tree *tree = lookup_tree(revs->repo, &it->oid); + tree->object.flags |= flags; add_pending_object_with_path(revs, &tree->object, "", 040000, path->buf); } @@ -1335,14 +1346,15 @@ static void add_cache_tree(struct cache_tree *it, struct rev_info *revs, for (i = 0; i < it->subtree_nr; i++) { struct cache_tree_sub *sub = it->down[i]; strbuf_addf(path, "%s%s", baselen ? "/" : "", sub->name); - add_cache_tree(sub->cache_tree, revs, path); + add_cache_tree(sub->cache_tree, revs, path, flags); strbuf_setlen(path, baselen); } } static void do_add_index_objects_to_pending(struct rev_info *revs, - struct index_state *istate) + struct index_state *istate, + unsigned int flags) { int i; @@ -1356,13 +1368,14 @@ static void do_add_index_objects_to_pending(struct rev_info *revs, blob = lookup_blob(revs->repo, &ce->oid); if (!blob) die("unable to add index blob to traversal"); + blob->object.flags |= flags; add_pending_object_with_path(revs, &blob->object, "", ce->ce_mode, ce->name); } if (istate->cache_tree) { struct strbuf path = STRBUF_INIT; - add_cache_tree(istate->cache_tree, revs, &path); + add_cache_tree(istate->cache_tree, revs, &path, flags); strbuf_release(&path); } } @@ -1372,7 +1385,7 @@ void add_index_objects_to_pending(struct rev_info *revs, unsigned int flags) struct worktree **worktrees, **p; read_index(revs->repo->index); - do_add_index_objects_to_pending(revs, revs->repo->index); + do_add_index_objects_to_pending(revs, revs->repo->index, flags); if (revs->single_worktree) return; @@ -1388,7 +1401,7 @@ void add_index_objects_to_pending(struct rev_info *revs, unsigned int flags) if (read_index_from(&istate, worktree_git_path(wt, "index"), get_worktree_git_dir(wt)) > 0) - do_add_index_objects_to_pending(revs, &istate); + do_add_index_objects_to_pending(revs, &istate, flags); discard_index(&istate); } free_worktrees(worktrees); @@ -2459,7 +2472,7 @@ int setup_revisions(int argc, const char **argv, struct rev_info *revs, struct s if (revs->diffopt.objfind) revs->simplify_history = 0; - if (revs->topo_order) + if (revs->topo_order && !generation_numbers_enabled(the_repository)) revs->limited = 1; if (revs->prune_data.nr) { @@ -2898,6 +2911,217 @@ static int mark_uninteresting(const struct object_id *oid, return 0; } +define_commit_slab(indegree_slab, int); +define_commit_slab(author_date_slab, timestamp_t); + +struct topo_walk_info { + uint32_t min_generation; + struct prio_queue explore_queue; + struct prio_queue indegree_queue; + struct prio_queue topo_queue; + struct indegree_slab indegree; + struct author_date_slab author_date; +}; + +static inline void test_flag_and_insert(struct prio_queue *q, struct commit *c, int flag) +{ + if (c->object.flags & flag) + return; + + c->object.flags |= flag; + prio_queue_put(q, c); +} + +static void explore_walk_step(struct rev_info *revs) +{ + struct topo_walk_info *info = revs->topo_walk_info; + struct commit_list *p; + struct commit *c = prio_queue_get(&info->explore_queue); + + if (!c) + return; + + if (parse_commit_gently(c, 1) < 0) + return; + + if (revs->sort_order == REV_SORT_BY_AUTHOR_DATE) + record_author_date(&info->author_date, c); + + if (revs->max_age != -1 && (c->date < revs->max_age)) + c->object.flags |= UNINTERESTING; + + if (process_parents(revs, c, NULL, NULL) < 0) + return; + + if (c->object.flags & UNINTERESTING) + mark_parents_uninteresting(c); + + for (p = c->parents; p; p = p->next) + test_flag_and_insert(&info->explore_queue, p->item, TOPO_WALK_EXPLORED); +} + +static void explore_to_depth(struct rev_info *revs, + uint32_t gen_cutoff) +{ + struct topo_walk_info *info = revs->topo_walk_info; + struct commit *c; + while ((c = prio_queue_peek(&info->explore_queue)) && + c->generation >= gen_cutoff) + explore_walk_step(revs); +} + +static void indegree_walk_step(struct rev_info *revs) +{ + struct commit_list *p; + struct topo_walk_info *info = revs->topo_walk_info; + struct commit *c = prio_queue_get(&info->indegree_queue); + + if (!c) + return; + + if (parse_commit_gently(c, 1) < 0) + return; + + explore_to_depth(revs, c->generation); + + for (p = c->parents; p; p = p->next) { + struct commit *parent = p->item; + int *pi = indegree_slab_at(&info->indegree, parent); + + if (*pi) + (*pi)++; + else + *pi = 2; + + test_flag_and_insert(&info->indegree_queue, parent, TOPO_WALK_INDEGREE); + + if (revs->first_parent_only) + return; + } +} + +static void compute_indegrees_to_depth(struct rev_info *revs, + uint32_t gen_cutoff) +{ + struct topo_walk_info *info = revs->topo_walk_info; + struct commit *c; + while ((c = prio_queue_peek(&info->indegree_queue)) && + c->generation >= gen_cutoff) + indegree_walk_step(revs); +} + +static void init_topo_walk(struct rev_info *revs) +{ + struct topo_walk_info *info; + struct commit_list *list; + revs->topo_walk_info = xmalloc(sizeof(struct topo_walk_info)); + info = revs->topo_walk_info; + memset(info, 0, sizeof(struct topo_walk_info)); + + init_indegree_slab(&info->indegree); + memset(&info->explore_queue, 0, sizeof(info->explore_queue)); + memset(&info->indegree_queue, 0, sizeof(info->indegree_queue)); + memset(&info->topo_queue, 0, sizeof(info->topo_queue)); + + switch (revs->sort_order) { + default: /* REV_SORT_IN_GRAPH_ORDER */ + info->topo_queue.compare = NULL; + break; + case REV_SORT_BY_COMMIT_DATE: + info->topo_queue.compare = compare_commits_by_commit_date; + break; + case REV_SORT_BY_AUTHOR_DATE: + init_author_date_slab(&info->author_date); + info->topo_queue.compare = compare_commits_by_author_date; + info->topo_queue.cb_data = &info->author_date; + break; + } + + info->explore_queue.compare = compare_commits_by_gen_then_commit_date; + info->indegree_queue.compare = compare_commits_by_gen_then_commit_date; + + info->min_generation = GENERATION_NUMBER_INFINITY; + for (list = revs->commits; list; list = list->next) { + struct commit *c = list->item; + + if (parse_commit_gently(c, 1)) + continue; + + test_flag_and_insert(&info->explore_queue, c, TOPO_WALK_EXPLORED); + test_flag_and_insert(&info->indegree_queue, c, TOPO_WALK_INDEGREE); + + if (c->generation < info->min_generation) + info->min_generation = c->generation; + + *(indegree_slab_at(&info->indegree, c)) = 1; + + if (revs->sort_order == REV_SORT_BY_AUTHOR_DATE) + record_author_date(&info->author_date, c); + } + compute_indegrees_to_depth(revs, info->min_generation); + + for (list = revs->commits; list; list = list->next) { + struct commit *c = list->item; + + if (*(indegree_slab_at(&info->indegree, c)) == 1) + prio_queue_put(&info->topo_queue, c); + } + + /* + * This is unfortunate; the initial tips need to be shown + * in the order given from the revision traversal machinery. + */ + if (revs->sort_order == REV_SORT_IN_GRAPH_ORDER) + prio_queue_reverse(&info->topo_queue); +} + +static struct commit *next_topo_commit(struct rev_info *revs) +{ + struct commit *c; + struct topo_walk_info *info = revs->topo_walk_info; + + /* pop next off of topo_queue */ + c = prio_queue_get(&info->topo_queue); + + if (c) + *(indegree_slab_at(&info->indegree, c)) = 0; + + return c; +} + +static void expand_topo_walk(struct rev_info *revs, struct commit *commit) +{ + struct commit_list *p; + struct topo_walk_info *info = revs->topo_walk_info; + if (process_parents(revs, commit, NULL, NULL) < 0) { + if (!revs->ignore_missing_links) + die("Failed to traverse parents of commit %s", + oid_to_hex(&commit->object.oid)); + } + + for (p = commit->parents; p; p = p->next) { + struct commit *parent = p->item; + int *pi; + + if (parse_commit_gently(parent, 1) < 0) + continue; + + if (parent->generation < info->min_generation) { + info->min_generation = parent->generation; + compute_indegrees_to_depth(revs, info->min_generation); + } + + pi = indegree_slab_at(&info->indegree, parent); + + (*pi)--; + if (*pi == 1) + prio_queue_put(&info->topo_queue, parent); + + if (revs->first_parent_only) + return; + } +} + int prepare_revision_walk(struct rev_info *revs) { int i; @@ -2934,11 +3158,13 @@ int prepare_revision_walk(struct rev_info *revs) commit_list_sort_by_date(&revs->commits); if (revs->no_walk) return 0; - if (revs->limited) + if (revs->limited) { if (limit_list(revs) < 0) return -1; - if (revs->topo_order) - sort_in_topological_order(&revs->commits, revs->sort_order); + if (revs->topo_order) + sort_in_topological_order(&revs->commits, revs->sort_order); + } else if (revs->topo_order) + init_topo_walk(revs); if (revs->line_level_traverse) line_log_filter(revs); if (revs->simplify_merges) @@ -2955,7 +3181,7 @@ static enum rewrite_result rewrite_one(struct rev_info *revs, struct commit **pp for (;;) { struct commit *p = *pp; if (!revs->limited) - if (add_parents_to_list(revs, p, &revs->commits, &cache) < 0) + if (process_parents(revs, p, &revs->commits, &cache) < 0) return rewrite_one_error; if (p->object.flags & UNINTERESTING) return rewrite_one_ok; @@ -3263,6 +3489,8 @@ static struct commit *get_revision_1(struct rev_info *revs) if (revs->reflog_info) commit = next_reflog_entry(revs->reflog_info); + else if (revs->topo_walk_info) + commit = next_topo_commit(revs); else commit = pop_commit(&revs->commits); @@ -3284,7 +3512,9 @@ static struct commit *get_revision_1(struct rev_info *revs) if (revs->reflog_info) try_to_simplify_commit(revs, commit); - else if (add_parents_to_list(revs, commit, &revs->commits, NULL) < 0) { + else if (revs->topo_walk_info) + expand_topo_walk(revs, commit); + else if (process_parents(revs, commit, &revs->commits, NULL) < 0) { if (!revs->ignore_missing_links) die("Failed to traverse parents of commit %s", oid_to_hex(&commit->object.oid)); diff --git a/revision.h b/revision.h index 0d2abc2d36..7987bfcd2e 100644 --- a/revision.h +++ b/revision.h @@ -32,6 +32,9 @@ #define TRACK_LINEAR (1u<<26) #define ALL_REV_FLAGS (((1u<<11)-1) | NOT_USER_GIVEN | TRACK_LINEAR) +#define TOPO_WALK_EXPLORED (1u<<27) +#define TOPO_WALK_INDEGREE (1u<<28) + #define DECORATE_SHORT_REFS 1 #define DECORATE_FULL_REFS 2 @@ -64,6 +67,8 @@ struct rev_cmdline_info { #define REVISION_WALK_NO_WALK_SORTED 1 #define REVISION_WALK_NO_WALK_UNSORTED 2 +struct topo_walk_info; + struct rev_info { /* Starting list */ struct commit_list *commits; @@ -270,6 +275,8 @@ struct rev_info { const char *break_bar; struct revision_sources *sources; + + struct topo_walk_info *topo_walk_info; }; int ref_excluded(struct string_list *, const char *path); diff --git a/run-command.c b/run-command.c index d679cc267c..c11ff80674 100644 --- a/run-command.c +++ b/run-command.c @@ -1226,7 +1226,7 @@ int start_async(struct async *async) { int err = pthread_create(&async->tid, NULL, run_thread, async); if (err) { - error_errno("cannot create thread"); + error(_("cannot create async thread: %s"), strerror(err)); goto error; } } @@ -1259,6 +1259,15 @@ int finish_async(struct async *async) #endif } +int async_with_fork(void) +{ +#ifdef NO_PTHREADS + return 1; +#else + return 0; +#endif +} + const char *find_hook(const char *name) { static struct strbuf path = STRBUF_INIT; diff --git a/run-command.h b/run-command.h index 3932420ec8..68f5369fc2 100644 --- a/run-command.h +++ b/run-command.h @@ -1,9 +1,7 @@ #ifndef RUN_COMMAND_H #define RUN_COMMAND_H -#ifndef NO_PTHREADS -#include <pthread.h> -#endif +#include "thread-utils.h" #include "argv-array.h" @@ -143,6 +141,7 @@ struct async { int start_async(struct async *async); int finish_async(struct async *async); int in_async(void); +int async_with_fork(void); void check_pipe(int err); /** diff --git a/send-pack.c b/send-pack.c index e920ca57df..f692686770 100644 --- a/send-pack.c +++ b/send-pack.c @@ -203,9 +203,8 @@ static int receive_status(int in, struct ref *refs) static int sideband_demux(int in, int out, void *data) { int *fd = data, ret; -#ifdef NO_PTHREADS - close(fd[1]); -#endif + if (async_with_fork()) + close(fd[1]); ret = recv_sideband("send-pack", fd[0], out); close(out); return ret; diff --git a/sequencer.c b/sequencer.c index 9e1ab3a2a7..e1a4dd15f1 100644 --- a/sequencer.c +++ b/sequencer.c @@ -669,55 +669,131 @@ missing_author: return res; } +/** + * Take a series of KEY='VALUE' lines where VALUE part is + * sq-quoted, and append <KEY, VALUE> at the end of the string list + */ +static int parse_key_value_squoted(char *buf, struct string_list *list) +{ + while (*buf) { + struct string_list_item *item; + char *np; + char *cp = strchr(buf, '='); + if (!cp) { + np = strchrnul(buf, '\n'); + return error(_("no key present in '%.*s'"), + (int) (np - buf), buf); + } + np = strchrnul(cp, '\n'); + *cp++ = '\0'; + item = string_list_append(list, buf); + + buf = np + (*np == '\n'); + *np = '\0'; + cp = sq_dequote(cp); + if (!cp) + return error(_("unable to dequote value of '%s'"), + item->string); + item->util = xstrdup(cp); + } + return 0; +} -/* - * write_author_script() used to fail to terminate the last line with a "'" and - * also escaped "'" incorrectly as "'\\\\''" rather than "'\\''". We check for - * the terminating "'" on the last line to see how "'" has been escaped in case - * git was upgraded while rebase was stopped. +/** + * Reads and parses the state directory's "author-script" file, and sets name, + * email and date accordingly. + * Returns 0 on success, -1 if the file could not be parsed. + * + * The author script is of the format: + * + * GIT_AUTHOR_NAME='$author_name' + * GIT_AUTHOR_EMAIL='$author_email' + * GIT_AUTHOR_DATE='$author_date' + * + * where $author_name, $author_email and $author_date are quoted. We are strict + * with our parsing, as the file was meant to be eval'd in the old + * git-am.sh/git-rebase--interactive.sh scripts, and thus if the file differs + * from what this function expects, it is better to bail out than to do + * something that the user does not expect. */ -static int quoting_is_broken(const char *s, size_t n) +int read_author_script(const char *path, char **name, char **email, char **date, + int allow_missing) { - /* Skip any empty lines in case the file was hand edited */ - while (n > 0 && s[--n] == '\n') - ; /* empty */ - if (n > 0 && s[n] != '\'') - return 1; + struct strbuf buf = STRBUF_INIT; + struct string_list kv = STRING_LIST_INIT_DUP; + int retval = -1; /* assume failure */ + int i, name_i = -2, email_i = -2, date_i = -2, err = 0; - return 0; + if (strbuf_read_file(&buf, path, 256) <= 0) { + strbuf_release(&buf); + if (errno == ENOENT && allow_missing) + return 0; + else + return error_errno(_("could not open '%s' for reading"), + path); + } + + if (parse_key_value_squoted(buf.buf, &kv)) + goto finish; + + for (i = 0; i < kv.nr; i++) { + if (!strcmp(kv.items[i].string, "GIT_AUTHOR_NAME")) { + if (name_i != -2) + name_i = error(_("'GIT_AUTHOR_NAME' already given")); + else + name_i = i; + } else if (!strcmp(kv.items[i].string, "GIT_AUTHOR_EMAIL")) { + if (email_i != -2) + email_i = error(_("'GIT_AUTHOR_EMAIL' already given")); + else + email_i = i; + } else if (!strcmp(kv.items[i].string, "GIT_AUTHOR_DATE")) { + if (date_i != -2) + date_i = error(_("'GIT_AUTHOR_DATE' already given")); + else + date_i = i; + } else { + err = error(_("unknown variable '%s'"), + kv.items[i].string); + } + } + if (name_i == -2) + error(_("missing 'GIT_AUTHOR_NAME'")); + if (email_i == -2) + error(_("missing 'GIT_AUTHOR_EMAIL'")); + if (date_i == -2) + error(_("missing 'GIT_AUTHOR_DATE'")); + if (date_i < 0 || email_i < 0 || date_i < 0 || err) + goto finish; + *name = kv.items[name_i].util; + *email = kv.items[email_i].util; + *date = kv.items[date_i].util; + retval = 0; +finish: + string_list_clear(&kv, !!retval); + strbuf_release(&buf); + return retval; } /* - * Read a list of environment variable assignments (such as the author-script - * file) into an environment block. Returns -1 on error, 0 otherwise. + * Read a GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL AND GIT_AUTHOR_DATE from a + * file with shell quoting into struct argv_array. Returns -1 on + * error, 0 otherwise. */ static int read_env_script(struct argv_array *env) { - struct strbuf script = STRBUF_INIT; - int i, count = 0, sq_bug; - const char *p2; - char *p; + char *name, *email, *date; - if (strbuf_read_file(&script, rebase_path_author_script(), 256) <= 0) + if (read_author_script(rebase_path_author_script(), + &name, &email, &date, 0)) return -1; - /* write_author_script() used to quote incorrectly */ - sq_bug = quoting_is_broken(script.buf, script.len); - for (p = script.buf; *p; p++) - if (sq_bug && skip_prefix(p, "'\\\\''", &p2)) - strbuf_splice(&script, p - script.buf, p2 - p, "'", 1); - else if (skip_prefix(p, "'\\''", &p2)) - strbuf_splice(&script, p - script.buf, p2 - p, "'", 1); - else if (*p == '\'') - strbuf_splice(&script, p-- - script.buf, 1, "", 0); - else if (*p == '\n') { - *p = '\0'; - count++; - } - for (i = 0, p = script.buf; i < count; i++) { - argv_array_push(env, p); - p += strlen(p) + 1; - } + argv_array_pushf(env, "GIT_AUTHOR_NAME=%s", name); + argv_array_pushf(env, "GIT_AUTHOR_EMAIL=%s", email); + argv_array_pushf(env, "GIT_AUTHOR_DATE=%s", date); + free(name); + free(email); + free(date); return 0; } @@ -737,54 +813,28 @@ static char *get_author(const char *message) /* Read author-script and return an ident line (author <email> timestamp) */ static const char *read_author_ident(struct strbuf *buf) { - const char *keys[] = { - "GIT_AUTHOR_NAME=", "GIT_AUTHOR_EMAIL=", "GIT_AUTHOR_DATE=" - }; struct strbuf out = STRBUF_INIT; - char *in, *eol; - const char *val[3]; - int i = 0; + char *name, *email, *date; - if (strbuf_read_file(buf, rebase_path_author_script(), 256) <= 0) + if (read_author_script(rebase_path_author_script(), + &name, &email, &date, 0)) return NULL; - /* dequote values and construct ident line in-place */ - for (in = buf->buf; i < 3 && in - buf->buf < buf->len; i++) { - if (!skip_prefix(in, keys[i], (const char **)&in)) { - warning(_("could not parse '%s' (looking for '%s')"), - rebase_path_author_script(), keys[i]); - return NULL; - } - - eol = strchrnul(in, '\n'); - *eol = '\0'; - if (!sq_dequote(in)) { - warning(_("bad quoting on %s value in '%s'"), - keys[i], rebase_path_author_script()); - return NULL; - } - val[i] = in; - in = eol + 1; - } - - if (i < 3) { - warning(_("could not parse '%s' (looking for '%s')"), - rebase_path_author_script(), keys[i]); - return NULL; - } - /* validate date since fmt_ident() will die() on bad value */ - if (parse_date(val[2], &out)){ + if (parse_date(date, &out)){ warning(_("invalid date format '%s' in '%s'"), - val[2], rebase_path_author_script()); + date, rebase_path_author_script()); strbuf_release(&out); return NULL; } strbuf_reset(&out); - strbuf_addstr(&out, fmt_ident(val[0], val[1], val[2], 0)); + strbuf_addstr(&out, fmt_ident(name, email, date, 0)); strbuf_swap(buf, &out); strbuf_release(&out); + free(name); + free(email); + free(date); return buf->buf; } @@ -1919,7 +1969,7 @@ static int read_and_refresh_cache(struct replay_opts *opts) { struct lock_file index_lock = LOCK_INIT; int index_fd = hold_locked_index(&index_lock, 0); - if (read_index_preload(&the_index, NULL, 0) < 0) { + if (read_index(&the_index) < 0) { rollback_lock_file(&index_lock); return error(_("git %s: failed to read the index"), _(action_name(opts))); @@ -2890,7 +2940,7 @@ static int do_reset(const char *name, int len, struct replay_opts *opts) struct tree_desc desc; struct tree *tree; struct unpack_trees_options unpack_tree_opts; - int ret = 0, i; + int ret = 0; if (hold_locked_index(&lock, LOCK_REPORT_ON_ERROR) < 0) return -1; @@ -2910,10 +2960,13 @@ static int do_reset(const char *name, int len, struct replay_opts *opts) } oidcpy(&oid, &opts->squash_onto); } else { + int i; + /* Determine the length of the label */ for (i = 0; i < len; i++) if (isspace(name[i])) - len = i; + break; + len = i; strbuf_addf(&ref_name, "refs/rewritten/%.*s", len, name); if (get_oid(ref_name.buf, &oid) && @@ -3191,10 +3244,6 @@ static int do_merge(struct commit *commit, const char *arg, int arg_len, } merge_commit = to_merge->item; - write_message(oid_to_hex(&merge_commit->object.oid), GIT_SHA1_HEXSZ, - git_path_merge_head(the_repository), 0); - write_message("no-ff", 5, git_path_merge_mode(the_repository), 0); - bases = get_merge_bases(head_commit, merge_commit); if (bases && oideq(&merge_commit->object.oid, &bases->item->object.oid)) { @@ -3203,6 +3252,10 @@ static int do_merge(struct commit *commit, const char *arg, int arg_len, goto leave_merge; } + write_message(oid_to_hex(&merge_commit->object.oid), GIT_SHA1_HEXSZ, + git_path_merge_head(the_repository), 0); + write_message("no-ff", 5, git_path_merge_mode(the_repository), 0); + for (j = bases; j; j = j->next) commit_list_insert(j->item, &reversed); free_commit_list(bases); @@ -3459,6 +3512,7 @@ static int pick_commits(struct todo_list *todo_list, struct replay_opts *opts) unlink(rebase_path_author_script()); unlink(rebase_path_stopped_sha()); unlink(rebase_path_amend()); + unlink(git_path_merge_head(the_repository)); delete_ref(NULL, "REBASE_HEAD", NULL, REF_NO_DEREF); if (item->command == TODO_BREAK) @@ -3829,6 +3883,7 @@ static int commit_staged_changes(struct replay_opts *opts, opts, flags)) return error(_("could not commit staged changes.")); unlink(rebase_path_amend()); + unlink(git_path_merge_head(the_repository)); if (final_fixup) { unlink(rebase_path_fixup_msg()); unlink(rebase_path_squash_msg()); @@ -4846,7 +4901,7 @@ int complete_action(struct replay_opts *opts, unsigned flags, if (checkout_onto(opts, onto_name, oid_to_hex(&oid), orig_head)) return -1; -; + if (require_clean_work_tree("rebase", "", 1, 1)) return -1; diff --git a/sequencer.h b/sequencer.h index 660cff5050..5071a73563 100644 --- a/sequencer.h +++ b/sequencer.h @@ -130,6 +130,9 @@ int prepare_branch_to_be_rebased(struct replay_opts *opts, const char *commit); #define SUMMARY_SHOW_AUTHOR_DATE (1 << 1) void print_commit_summary(const char *prefix, const struct object_id *oid, unsigned int flags); + +int read_author_script(const char *path, char **name, char **email, char **date, + int allow_missing); #endif void parse_strategy_opts(struct replay_opts *opts, char *raw_opts); @@ -402,6 +402,20 @@ void setup_work_tree(void) initialized = 1; } +static int read_worktree_config(const char *var, const char *value, void *vdata) +{ + struct repository_format *data = vdata; + + if (strcmp(var, "core.bare") == 0) { + data->is_bare = git_config_bool(var, value); + } else if (strcmp(var, "core.worktree") == 0) { + if (!value) + return config_error_nonbool(var); + data->work_tree = xstrdup(value); + } + return 0; +} + static int check_repo_format(const char *var, const char *value, void *vdata) { struct repository_format *data = vdata; @@ -423,16 +437,13 @@ static int check_repo_format(const char *var, const char *value, void *vdata) if (!value) return config_error_nonbool(var); data->partial_clone = xstrdup(value); - } else + } else if (!strcmp(ext, "worktreeconfig")) + data->worktree_config = git_config_bool(var, value); + else string_list_append(&data->unknown_extensions, ext); - } else if (strcmp(var, "core.bare") == 0) { - data->is_bare = git_config_bool(var, value); - } else if (strcmp(var, "core.worktree") == 0) { - if (!value) - return config_error_nonbool(var); - data->work_tree = xstrdup(value); } - return 0; + + return read_worktree_config(var, value, vdata); } static int check_repository_format_gently(const char *gitdir, struct repository_format *candidate, int *nongit_ok) @@ -466,7 +477,20 @@ static int check_repository_format_gently(const char *gitdir, struct repository_ repository_format_precious_objects = candidate->precious_objects; repository_format_partial_clone = candidate->partial_clone; + repository_format_worktree_config = candidate->worktree_config; string_list_clear(&candidate->unknown_extensions, 0); + + if (repository_format_worktree_config) { + /* + * pick up core.bare and core.worktree from per-worktree + * config if present + */ + strbuf_addf(&sb, "%s/config.worktree", gitdir); + git_config_from_file(read_worktree_config, sb.buf, candidate); + strbuf_release(&sb); + has_common = 0; + } + if (!has_common) { if (candidate->is_bare != -1) { is_bare_repository_cfg = candidate->is_bare; diff --git a/sha1-file.c b/sha1-file.c index dd0b6aa873..2daf7d9935 100644 --- a/sha1-file.c +++ b/sha1-file.c @@ -2199,7 +2199,8 @@ static int check_stream_sha1(git_zstream *stream, * see the comment in unpack_sha1_rest for details. */ while (total_read <= size && - (status == Z_OK || status == Z_BUF_ERROR)) { + (status == Z_OK || + (status == Z_BUF_ERROR && !stream->avail_out))) { stream->next_out = buf; stream->avail_out = sizeof(buf); if (size - total_read < stream->avail_out) diff --git a/streaming.c b/streaming.c index d1e6b2dce6..ac7c7a22f9 100644 --- a/streaming.c +++ b/streaming.c @@ -408,6 +408,15 @@ static read_method_decl(pack_non_delta) st->z_state = z_done; break; } + + /* + * Unlike the loose object case, we do not have to worry here + * about running out of input bytes and spinning infinitely. If + * we get Z_BUF_ERROR due to too few input bytes, then we'll + * replenish them in the next use_pack() call when we loop. If + * we truly hit the end of the pack (i.e., because it's corrupt + * or truncated), then use_pack() catches that and will die(). + */ if (status != Z_OK && status != Z_BUF_ERROR) { git_inflate_end(&st->z); st->z_state = z_error; diff --git a/submodule-config.c b/submodule-config.c index b132f7a80b..52702c62d9 100644 --- a/submodule-config.c +++ b/submodule-config.c @@ -1,4 +1,5 @@ #include "cache.h" +#include "dir.h" #include "repository.h" #include "config.h" #include "submodule-config.h" @@ -613,8 +614,34 @@ static void submodule_cache_check_init(struct repository *repo) static void config_from_gitmodules(config_fn_t fn, struct repository *repo, void *data) { if (repo->worktree) { - char *file = repo_worktree_path(repo, GITMODULES_FILE); - git_config_from_file(fn, file, data); + struct git_config_source config_source = { 0 }; + const struct config_options opts = { 0 }; + struct object_id oid; + char *file; + + file = repo_worktree_path(repo, GITMODULES_FILE); + if (file_exists(file)) { + config_source.file = file; + } else if (repo->submodule_prefix) { + /* + * When get_oid and config_with_options, used below, + * become able to work on a specific repository, this + * warning branch can be removed. + */ + warning("nested submodules without %s in the working tree are not supported yet", + GITMODULES_FILE); + goto out; + } else if (get_oid(GITMODULES_INDEX, &oid) >= 0) { + config_source.blob = GITMODULES_INDEX; + } else if (get_oid(GITMODULES_HEAD, &oid) >= 0) { + config_source.blob = GITMODULES_HEAD; + } else { + goto out; + } + + config_with_options(fn, data, &config_source, &opts); + +out: free(file); } } @@ -692,6 +719,43 @@ void submodule_free(struct repository *r) submodule_cache_clear(r->submodule_cache); } +static int config_print_callback(const char *var, const char *value, void *cb_data) +{ + char *wanted_key = cb_data; + + if (!strcmp(wanted_key, var)) + printf("%s\n", value); + + return 0; +} + +int print_config_from_gitmodules(struct repository *repo, const char *key) +{ + int ret; + char *store_key; + + ret = git_config_parse_key(key, &store_key, NULL); + if (ret < 0) + return CONFIG_INVALID_KEY; + + config_from_gitmodules(config_print_callback, repo, store_key); + + free(store_key); + return 0; +} + +int config_set_in_gitmodules_file_gently(const char *key, const char *value) +{ + int ret; + + ret = git_config_set_in_file_gently(GITMODULES_FILE, key, value); + if (ret < 0) + /* Maybe the user already did that, don't error out here */ + warning(_("Could not update .gitmodules entry %s"), key); + + return ret; +} + struct fetch_config { int *max_children; int *recurse_submodules; diff --git a/submodule-config.h b/submodule-config.h index dc7278eea4..4dc9b0771c 100644 --- a/submodule-config.h +++ b/submodule-config.h @@ -48,6 +48,8 @@ const struct submodule *submodule_from_path(struct repository *r, const struct object_id *commit_or_tree, const char *path); void submodule_free(struct repository *r); +int print_config_from_gitmodules(struct repository *repo, const char *key); +int config_set_in_gitmodules_file_gently(const char *key, const char *value); /* * Returns 0 if the name is syntactically acceptable as a submodule "name" diff --git a/submodule.c b/submodule.c index a2701ede4a..6415cc5580 100644 --- a/submodule.c +++ b/submodule.c @@ -52,6 +52,24 @@ int is_gitmodules_unmerged(const struct index_state *istate) } /* + * Check if the .gitmodules file is safe to write. + * + * Writing to the .gitmodules file requires that the file exists in the + * working tree or, if it doesn't, that a brand new .gitmodules file is going + * to be created (i.e. it's neither in the index nor in the current branch). + * + * It is not safe to write to .gitmodules if it's not in the working tree but + * it is in the index or in the current branch, because writing new values + * (and staging them) would blindly overwrite ALL the old content. + */ +int is_writing_gitmodules_ok(void) +{ + struct object_id oid; + return file_exists(GITMODULES_FILE) || + (get_oid(GITMODULES_INDEX, &oid) < 0 && get_oid(GITMODULES_HEAD, &oid) < 0); +} + +/* * Check if the .gitmodules file has unstaged modifications. This must be * checked before allowing modifications to the .gitmodules file with the * intention to stage them later, because when continuing we would stage the @@ -89,6 +107,7 @@ int update_path_in_gitmodules(const char *oldpath, const char *newpath) { struct strbuf entry = STRBUF_INIT; const struct submodule *submodule; + int ret; if (!file_exists(GITMODULES_FILE)) /* Do nothing without .gitmodules */ return -1; @@ -104,14 +123,9 @@ int update_path_in_gitmodules(const char *oldpath, const char *newpath) strbuf_addstr(&entry, "submodule."); strbuf_addstr(&entry, submodule->name); strbuf_addstr(&entry, ".path"); - if (git_config_set_in_file_gently(GITMODULES_FILE, entry.buf, newpath) < 0) { - /* Maybe the user already did that, don't error out here */ - warning(_("Could not update .gitmodules entry %s"), entry.buf); - strbuf_release(&entry); - return -1; - } + ret = config_set_in_gitmodules_file_gently(entry.buf, newpath); strbuf_release(&entry); - return 0; + return ret; } /* diff --git a/submodule.h b/submodule.h index a8a4fe8d25..a680214c01 100644 --- a/submodule.h +++ b/submodule.h @@ -40,6 +40,7 @@ struct submodule_update_strategy { #define SUBMODULE_UPDATE_STRATEGY_INIT {SM_UPDATE_UNSPECIFIED, NULL} int is_gitmodules_unmerged(const struct index_state *istate); +int is_writing_gitmodules_ok(void); int is_staging_gitmodules_ok(struct index_state *istate); int update_path_in_gitmodules(const char *oldpath, const char *newpath); int remove_path_from_gitmodules(const char *path); @@ -344,6 +344,10 @@ of the index for the whole test suite by bypassing the default number of cache entries and thread minimums. Setting this to 1 will make the index loading single threaded. +GIT_TEST_MULTI_PACK_INDEX=<boolean>, when true, forces the multi-pack- +index to be written after every 'git repack' command, and overrides the +'core.multiPackIndex' setting to true. + Naming Tests ------------ diff --git a/t/helper/test-parse-options.c b/t/helper/test-parse-options.c index 9cb8a0ea0f..47fee660b8 100644 --- a/t/helper/test-parse-options.c +++ b/t/helper/test-parse-options.c @@ -36,6 +36,7 @@ static int length_callback(const struct option *opt, const char *arg, int unset) static int number_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); *(int *)opt->value = strtol(arg, NULL, 10); return 0; } @@ -119,7 +120,6 @@ int cmd__parse_options(int argc, const char **argv) OPT_INTEGER('j', NULL, &integer, "get a integer, too"), OPT_MAGNITUDE('m', "magnitude", &magnitude, "get a magnitude"), OPT_SET_INT(0, "set23", &integer, "set integer to 23", 23), - OPT_DATE('t', NULL, ×tamp, "get timestamp of <time>"), OPT_CALLBACK('L', "length", &integer, "str", "get length of <str>", length_callback), OPT_FILENAME('F', "file", &file, "set file to <file>"), diff --git a/t/helper/test-prio-queue.c b/t/helper/test-prio-queue.c index 9807b649b1..5bc9c46ea5 100644 --- a/t/helper/test-prio-queue.c +++ b/t/helper/test-prio-queue.c @@ -22,14 +22,24 @@ int cmd__prio_queue(int argc, const char **argv) struct prio_queue pq = { intcmp }; while (*++argv) { - if (!strcmp(*argv, "get")) - show(prio_queue_get(&pq)); - else if (!strcmp(*argv, "dump")) { - int *v; - while ((v = prio_queue_get(&pq))) - show(v); - } - else { + if (!strcmp(*argv, "get")) { + void *peek = prio_queue_peek(&pq); + void *get = prio_queue_get(&pq); + if (peek != get) + BUG("peek and get results do not match"); + show(get); + } else if (!strcmp(*argv, "dump")) { + void *peek; + void *get; + while ((peek = prio_queue_peek(&pq))) { + get = prio_queue_get(&pq); + if (peek != get) + BUG("peek and get results do not match"); + show(get); + } + } else if (!strcmp(*argv, "stack")) { + pq.compare = NULL; + } else { int *v = malloc(sizeof(*v)); *v = atoi(*argv); prio_queue_put(&pq, v); diff --git a/t/helper/test-reach.c b/t/helper/test-reach.c index 08d2ea68e8..a0272178b7 100644 --- a/t/helper/test-reach.c +++ b/t/helper/test-reach.c @@ -32,8 +32,8 @@ int cmd__reach(int ac, const char **av) struct commit *A, *B; struct commit_list *X, *Y; struct object_array X_obj = OBJECT_ARRAY_INIT; - struct commit **X_array; - int X_nr, X_alloc; + struct commit **X_array, **Y_array; + int X_nr, X_alloc, Y_nr, Y_alloc; struct strbuf buf = STRBUF_INIT; struct repository *r = the_repository; @@ -44,9 +44,10 @@ int cmd__reach(int ac, const char **av) A = B = NULL; X = Y = NULL; - X_nr = 0; - X_alloc = 16; + X_nr = Y_nr = 0; + X_alloc = Y_alloc = 16; ALLOC_ARRAY(X_array, X_alloc); + ALLOC_ARRAY(Y_array, Y_alloc); while (strbuf_getline(&buf, stdin) != EOF) { struct object_id oid; @@ -92,6 +93,8 @@ int cmd__reach(int ac, const char **av) case 'Y': commit_list_insert(c, &Y); + ALLOC_GROW(Y_array, Y_nr + 1, Y_alloc); + Y_array[Y_nr++] = c; break; default: @@ -136,6 +139,29 @@ int cmd__reach(int ac, const char **av) filter.with_commit_tag_algo = 0; printf("%s(_,A,X,_):%d\n", av[1], commit_contains(&filter, A, X, &cache)); + } else if (!strcmp(av[1], "get_reachable_subset")) { + const int reachable_flag = 1; + int i, count = 0; + struct commit_list *current; + struct commit_list *list = get_reachable_subset(X_array, X_nr, + Y_array, Y_nr, + reachable_flag); + printf("get_reachable_subset(X,Y)\n"); + for (current = list; current; current = current->next) { + if (!(list->item->object.flags & reachable_flag)) + die(_("commit %s is not marked reachable"), + oid_to_hex(&list->item->object.oid)); + count++; + } + for (i = 0; i < Y_nr; i++) { + if (Y_array[i]->object.flags & reachable_flag) + count--; + } + + if (count < 0) + die(_("too many commits marked reachable")); + + print_sorted_commit_ids(list); } exit(0); diff --git a/t/helper/test-submodule-nested-repo-config.c b/t/helper/test-submodule-nested-repo-config.c new file mode 100644 index 0000000000..a31e2a9bea --- /dev/null +++ b/t/helper/test-submodule-nested-repo-config.c @@ -0,0 +1,30 @@ +#include "test-tool.h" +#include "submodule-config.h" + +static void die_usage(int argc, const char **argv, const char *msg) +{ + fprintf(stderr, "%s\n", msg); + fprintf(stderr, "Usage: %s <submodulepath> <config name>\n", argv[0]); + exit(1); +} + +int cmd__submodule_nested_repo_config(int argc, const char **argv) +{ + struct repository submodule; + + if (argc < 3) + die_usage(argc, argv, "Wrong number of arguments."); + + setup_git_directory(); + + if (repo_submodule_init(&submodule, the_repository, argv[1])) { + die_usage(argc, argv, "Submodule not found."); + } + + /* Read the config of _child_ submodules. */ + print_config_from_gitmodules(&submodule, argv[2]); + + submodule_free(the_repository); + + return 0; +} diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c index 5df8b682aa..bfb195b1a8 100644 --- a/t/helper/test-tool.c +++ b/t/helper/test-tool.c @@ -46,6 +46,7 @@ static struct test_cmd cmds[] = { { "strcmp-offset", cmd__strcmp_offset }, { "string-list", cmd__string_list }, { "submodule-config", cmd__submodule_config }, + { "submodule-nested-repo-config", cmd__submodule_nested_repo_config }, { "subprocess", cmd__subprocess }, { "urlmatch-normalization", cmd__urlmatch_normalization }, { "wildmatch", cmd__wildmatch }, diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h index 71f470b871..042f12464b 100644 --- a/t/helper/test-tool.h +++ b/t/helper/test-tool.h @@ -42,6 +42,7 @@ int cmd__sigchain(int argc, const char **argv); int cmd__strcmp_offset(int argc, const char **argv); int cmd__string_list(int argc, const char **argv); int cmd__submodule_config(int argc, const char **argv); +int cmd__submodule_nested_repo_config(int argc, const char **argv); int cmd__subprocess(int argc, const char **argv); int cmd__urlmatch_normalization(int argc, const char **argv); int cmd__wildmatch(int argc, const char **argv); diff --git a/t/lib-gpg/keyring.gpg b/t/lib-gpg/keyring.gpg index d4754a1f19..918dfce332 100644 --- a/t/lib-gpg/keyring.gpg +++ b/t/lib-gpg/keyring.gpg @@ -30,7 +30,6 @@ Cezx4Q2khACcCs+/LtE8Lb9hC+2cvr3uH5p82AI= =aEiU -----END PGP PRIVATE KEY BLOCK----- -----BEGIN PGP PRIVATE KEY BLOCK----- -Version: GnuPG v1 lQOYBFFMlkcBCADJi/xnAF8yI34PHilSCbM7VtOFO17oFMkpu4cgN2QpPuM5MVjy cvrzKSguZFvPCDLzeAFJW1uPxL4SHaHSkisCrFhijH7OJWcOPNPSFCwu+inAoAsv @@ -83,11 +82,43 @@ fn1sY/IG5atoKK+ypmV/TlBlMZqFQzuPIJQT8VLbmxtLlDhJG04LbI6c8axIZxOO ZKLy5nTTSy16ztqEeS7eifHLPZg1UFFyEEIQ1XW0CNDAeuWKh90ERjyl4Cg7PnWS Z9Ei+zj6JD5Pcdi3BJhQo9WOLOVEJ0NHmewTYqk9QVXH/0v1Hdl4LMJtgcbdbDWk 4UTkXbg9pn3umCgkNJ3Vs8fWnIWO9Izdr2/wrFY2JvUT7Yvl+wsNIWatvOEzGy7n -BOW78WUxzhu0YJTLKy+iKCjg5HS5dx6OC+e4aEEgfhNPCMkbvDsJjtQ= -=hieJ +BOW78WUxzhu0YJTLKy+iKCjg5HS5dx6OC+e4aEEgfhNPCMkbvDsJjtSdA5gEW967 +3AEIAKjseT0sTQjyN39fOn0fzxWp89REMUUKgLigb01MKuuNI3cedBZsz3hpFOKV +cii5rldw8uf3yS3Okht2DfHPSD4NrGzLGEzSTpQ10S8N2q0DUYwyLU6C0U8HnMZm +/n+lCGBbUoxvnruohAvKAjpHO3rmJ8D4De9hlWg/fwdAxQQ0Sve0kN8Vwk2p1GuO +OWQKV1SU9c+kBiou7dewQmbilPRanKmP5ZSU4emhpTOMlJFXF+kmYSODQk1cMvWW +Ob3ttll2llX0Gul7Sjf+haq/FcRyRk7Tw5MHwZjr5aWiCny0/0+byvfF6SBIfzyE +qlyWURQ2gHZUqSiG3QPMZiYr04cAEQEAAQAH/Am4rv/oQF6wodgz5y4zc6JJiTDA +4+nKdIuR7OKqUxk1oo7eZjJML/xvMumygNyUvJ9nodl1SlMKilOhdAswfkKj9gJY +BdDJLm1OufhW3pJwy6ahbjeqEgwJFVENtSPF0zkuyED9kElrpbD2ZTGfzwdM0e9D +10ZDFWtODCw8rzOFcijujgI8oilLtxSNrkkTKW+25WJFRNPSHgIkMIm8UlPAG+rj +3Yj9UqodeXTSvXwG2zceOxjFJadV77sOFJDgwWslN6J8El4+GcgwFVepJxoZEj7e +cKkmVr0Dc9/Q04D5dWATc1FYcIhZbTu3oImCAh45ep4u9WYLUV5PGyeMviEEAMwo +mJbYBxWuPjpNa722HQcbvMUiZWWDwHfLCib/SaP0AgfDahid8/PcZwxOPHPByBrm +GDi0z7ibn/pgJr07kpp1Cic9ntfc2FvkI0QMzG0EuiekzQyPEnzjoDHF+V4nJIj2 +GWVjLYYqlZWEmhsfKt1CnlPXBunKoDJ30ABPcHJ/BADT0WxAIVKF4lO2HlrDVP44 +bufBEG9Ct7dl/G08Qve4Ag3VEZpT82vEFp0LzX0mTCDIUKJUYAYLxAIPhP7IvIfc +EZXrwyDUxU7YSgKTHMKo9nFC6fIc1GeGPRalIF1gmTY32qlYJC6y5BTDhZNV5ydG +u8QL2P/orP7XuRrJyeyK+QP/XTekr/DS6Jkct826MPA52ciIkWVgYLatH5fO4HCq +ssDU8vz7FbbvGs0G1Xn7GA4m9dNYVOZtKwX++3nf2IEOpgPiZVTn/nP2u3HutpJb +/HMLlcfZGiGdxS6n/vdz6wsEobJoi6STkHkA+VFNOSZmdsw6eKl3X911tpCTYfOG +2U47/IkCbAQYAQgAIBYhBNS+IjEa0xMeXtoppGEJLoW3InGJBQJb3rvcAhsCAUAJ +EGEJLoW3InGJwHQgBBkBCAAdFiEE+DZKWeB//p9NYwBaZaDuoC4wytcFAlveu9wA +CgkQZaDuoC4wytcD9gf/WigtHl7lFyl8RaE/uqROFEelZyM00v1h55fd/IGRG88E +tN0Lr4FaqBqPkMZjU/LN9UMBaTd+748vHlHaweZqljXJu99CO9Id7Y4w7WzF3C3Y +yQsGZ92EGxthsPK0+rhHV0MbaINupI1oO9gATFglSxq17o83FJatGRjaXCZau8jr +57/By1MGtjk+Iq1NkzGkrX778LdRQGLKDw2Qa7lsdHY8d3lUPAH8mbb97ELmIc9t +PG2aM7ATJL7nBmFuTHo6hmEcIw32Ei9KK1zxM0ZylEYkjBjHAlklWmKb9MiayMC5 +uHW7Iyhjl+NbgbIEr2JTamW/9tL6UrIIxiDEdqaHNfCaB/9D+V31Upcohc9azwB4 +AF8diQwt5nfiVpnVeF/W8+eS1By2W6QrwLNthNRabYFnuSf9USHAY6atDWe+egId +MLIv4ce0i3ykoczSu0oMoUCMxdl9kQrsNHZCqWX/OiDDLSb05u/P/3he900y6tSB +15MbIPA6i5Bw/693nHguqxS1ASbBB/LiIu3vCXdFEs9RMvIJ+qkP3xQA96oImQiK +R3U6OGv593eONKijUINNqHRq6+UxIyJ+OCAi+L2QTidAhJLRCp6EZD96u02cthYq +8KA8j1+rx9BcbeacVVHepeG1JsgxsXX8BTJ7ZuS5VVndZOjag8URW/9nJMf01w/h +el64 +=Iv7W -----END PGP PRIVATE KEY BLOCK----- -----BEGIN PGP PUBLIC KEY BLOCK----- -Version: GnuPG v1 mQGiBEZnyykRBACzCPjIpTYNL7Y2tQqlEGTTDlvZcWNLjF5f7ZzuyOqNOidLUgFD 36qch1LZLSZkShdR3Gae+bsolyjxrlFuFP0eXRPMtqK20aLw7WZvPFpEV1ThMne+ @@ -137,6 +168,25 @@ bGPyBuWraCivsqZlf05QZTGahUM7jyCUE/FS25sbS5Q4SRtOC2yOnPGsSGcTjmSi 8uZ000stes7ahHku3onxyz2YNVBRchBCENV1tAjQwHrliofdBEY8peAoOz51kmfR Ivs4+iQ+T3HYtwSYUKPVjizlRCdDR5nsE2KpPUFVx/9L9R3ZeCzCbYHG3Ww1pOFE 5F24PaZ97pgoJDSd1bPH1pyFjvSM3a9v8KxWNib1E+2L5fsLDSFmrbzhMxsu5wTl -u/FlMc4btGCUyysvoigo4OR0uXcejgvnuGhBIH4TTwjJG7w7CY7U -=iYv/ +u/FlMc4btGCUyysvoigo4OR0uXcejgvnuGhBIH4TTwjJG7w7CY7UuQENBFveu9wB +CACo7Hk9LE0I8jd/Xzp9H88VqfPURDFFCoC4oG9NTCrrjSN3HnQWbM94aRTilXIo +ua5XcPLn98ktzpIbdg3xz0g+DaxsyxhM0k6UNdEvDdqtA1GMMi1OgtFPB5zGZv5/ +pQhgW1KMb567qIQLygI6Rzt65ifA+A3vYZVoP38HQMUENEr3tJDfFcJNqdRrjjlk +CldUlPXPpAYqLu3XsEJm4pT0Wpypj+WUlOHpoaUzjJSRVxfpJmEjg0JNXDL1ljm9 +7bZZdpZV9Brpe0o3/oWqvxXEckZO08OTB8GY6+Wlogp8tP9Pm8r3xekgSH88hKpc +llEUNoB2VKkoht0DzGYmK9OHABEBAAGJAmwEGAEIACAWIQTUviIxGtMTHl7aKaRh +CS6FtyJxiQUCW9673AIbAgFACRBhCS6FtyJxicB0IAQZAQgAHRYhBPg2Slngf/6f +TWMAWmWg7qAuMMrXBQJb3rvcAAoJEGWg7qAuMMrXA/YH/1ooLR5e5RcpfEWhP7qk +ThRHpWcjNNL9YeeX3fyBkRvPBLTdC6+BWqgaj5DGY1PyzfVDAWk3fu+PLx5R2sHm +apY1ybvfQjvSHe2OMO1sxdwt2MkLBmfdhBsbYbDytPq4R1dDG2iDbqSNaDvYAExY +JUsate6PNxSWrRkY2lwmWrvI6+e/wctTBrY5PiKtTZMxpK1++/C3UUBiyg8NkGu5 +bHR2PHd5VDwB/Jm2/exC5iHPbTxtmjOwEyS+5wZhbkx6OoZhHCMN9hIvSitc8TNG +cpRGJIwYxwJZJVpim/TImsjAubh1uyMoY5fjW4GyBK9iU2plv/bS+lKyCMYgxHam +hzXwmgf/Q/ld9VKXKIXPWs8AeABfHYkMLeZ34laZ1Xhf1vPnktQctlukK8CzbYTU +Wm2BZ7kn/VEhwGOmrQ1nvnoCHTCyL+HHtIt8pKHM0rtKDKFAjMXZfZEK7DR2Qqll +/zogwy0m9Obvz/94XvdNMurUgdeTGyDwOouQcP+vd5x4LqsUtQEmwQfy4iLt7wl3 +RRLPUTLyCfqpD98UAPeqCJkIikd1Ojhr+fd3jjSoo1CDTah0auvlMSMifjggIvi9 +kE4nQISS0QqehGQ/ertNnLYWKvCgPI9fq8fQXG3mnFVR3qXhtSbIMbF1/AUye2bk +uVVZ3WTo2oPFEVv/ZyTH9NcP4XpeuA== +=KRyT -----END PGP PUBLIC KEY BLOCK----- diff --git a/t/perf/p3400-rebase.sh b/t/perf/p3400-rebase.sh index ce271ca4c1..d202aaed06 100755 --- a/t/perf/p3400-rebase.sh +++ b/t/perf/p3400-rebase.sh @@ -6,9 +6,9 @@ test_description='Tests rebase performance' test_perf_default_repo test_expect_success 'setup rebasing on top of a lot of changes' ' - git checkout -f -b base && - git checkout -b to-rebase && - git checkout -b upstream && + git checkout -f -B base && + git checkout -B to-rebase && + git checkout -B upstream && for i in $(seq 100) do # simulate huge diffs @@ -35,8 +35,8 @@ test_perf 'rebase on top of a lot of unrelated changes' ' test_expect_success 'setup rebasing many changes without split-index' ' git config core.splitIndex false && - git checkout -b upstream2 to-rebase && - git checkout -b to-rebase2 upstream + git checkout -B upstream2 to-rebase && + git checkout -B to-rebase2 upstream ' test_perf 'rebase a lot of unrelated changes without split-index' ' diff --git a/t/t0006-date.sh b/t/t0006-date.sh index 64ff86df8e..ffb2975e48 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -113,6 +113,8 @@ check_approxidate '3:00' '2009-08-30 03:00:00' check_approxidate '15:00' '2009-08-30 15:00:00' check_approxidate 'noon today' '2009-08-30 12:00:00' check_approxidate 'noon yesterday' '2009-08-29 12:00:00' +check_approxidate 'January 5th noon pm' '2009-01-05 12:00:00' +check_approxidate '10am noon' '2009-08-29 12:00:00' check_approxidate 'last tuesday' '2009-08-25 19:20:00' check_approxidate 'July 5th' '2009-07-05 19:20:00' diff --git a/t/t0009-prio-queue.sh b/t/t0009-prio-queue.sh index e56dfce668..3941ad2528 100755 --- a/t/t0009-prio-queue.sh +++ b/t/t0009-prio-queue.sh @@ -47,4 +47,18 @@ test_expect_success 'notice empty queue' ' test_cmp expect actual ' +cat >expect <<'EOF' +3 +2 +6 +4 +5 +1 +8 +EOF +test_expect_success 'stack order' ' + test-tool prio-queue stack 8 1 5 4 6 2 3 dump >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0029-core-unsetenvvars.sh b/t/t0029-core-unsetenvvars.sh new file mode 100755 index 0000000000..24ce46a6ea --- /dev/null +++ b/t/t0029-core-unsetenvvars.sh @@ -0,0 +1,30 @@ +#!/bin/sh + +test_description='test the Windows-only core.unsetenvvars setting' + +. ./test-lib.sh + +if ! test_have_prereq MINGW +then + skip_all='skipping Windows-specific tests' + test_done +fi + +test_expect_success 'setup' ' + mkdir -p "$TRASH_DIRECTORY/.git/hooks" && + write_script "$TRASH_DIRECTORY/.git/hooks/pre-commit" <<-\EOF + echo $HOBBES >&2 + EOF +' + +test_expect_success 'core.unsetenvvars works' ' + HOBBES=Calvin && + export HOBBES && + git commit --allow-empty -m with 2>err && + grep Calvin err && + git -c core.unsetenvvars=FINDUS,HOBBES,CALVIN \ + commit --allow-empty -m without 2>err && + ! grep Calvin err +' + +test_done diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 17d0c18feb..f5b10861c4 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -23,7 +23,6 @@ usage: test-tool parse-options <options> -j <n> get a integer, too -m, --magnitude <n> get a magnitude --set23 set integer to 23 - -t <time> get timestamp of <time> -L, --length <str> get length of <str> -F, --file <file> set file to <file> @@ -246,27 +245,6 @@ test_expect_success 'keep some options as arguments' ' ' cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 1 -string: (not set) -abbrev: 7 -verbose: -1 -quiet: 1 -dry run: no -file: (not set) -arg 00: foo -EOF - -test_expect_success 'OPT_DATE() works' ' - test-tool parse-options -t "1970-01-01 00:00:01 +0000" \ - foo -q >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output -' - -cat >expect <<\EOF Callback: "four", 0 boolean: 5 integer: 4 diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index cd74c0a471..c7b53e494b 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -306,6 +306,8 @@ test_git_path GIT_COMMON_DIR=bar hooks/me bar/hooks/me test_git_path GIT_COMMON_DIR=bar config bar/config test_git_path GIT_COMMON_DIR=bar packed-refs bar/packed-refs test_git_path GIT_COMMON_DIR=bar shallow bar/shallow +test_git_path GIT_COMMON_DIR=bar common bar/common +test_git_path GIT_COMMON_DIR=bar common/file bar/common/file # In the tests below, $(pwd) must be used because it is a native path on # Windows and avoids MSYS's path mangling (which simplifies "foo/../bar" and diff --git a/t/t1060-object-corruption.sh b/t/t1060-object-corruption.sh index ac1f189fd2..4feb65157d 100755 --- a/t/t1060-object-corruption.sh +++ b/t/t1060-object-corruption.sh @@ -117,8 +117,10 @@ test_expect_failure 'clone --local detects misnamed objects' ' ' test_expect_success 'fetch into corrupted repo with index-pack' ' + cp -R bit-error bit-error-cp && + test_when_finished "rm -rf bit-error-cp" && ( - cd bit-error && + cd bit-error-cp && test_must_fail git -c transfer.unpackLimit=1 \ fetch ../no-bit-error 2>stderr && test_i18ngrep ! -i collision stderr diff --git a/t/t1300-config.sh b/t/t1300-config.sh index e2cd50ecfc..9652b241c7 100755 --- a/t/t1300-config.sh +++ b/t/t1300-config.sh @@ -76,15 +76,11 @@ EOF test_expect_success 'non-match result' 'test_cmp expect .git/config' test_expect_success 'find mixed-case key by canonical name' ' - echo Second >expect && - git config cores.whatever >actual && - test_cmp expect actual + test_cmp_config Second cores.whatever ' test_expect_success 'find mixed-case key by non-canonical name' ' - echo Second >expect && - git config CoReS.WhAtEvEr >actual && - test_cmp expect actual + test_cmp_config Second CoReS.WhAtEvEr ' test_expect_success 'subsections are not canonicalized by git-config' ' @@ -94,12 +90,8 @@ test_expect_success 'subsections are not canonicalized by git-config' ' [section "SubSection"] key = two EOF - echo one >expect && - git config section.subsection.key >actual && - test_cmp expect actual && - echo two >expect && - git config section.SubSection.key >actual && - test_cmp expect actual + test_cmp_config one section.subsection.key && + test_cmp_config two section.SubSection.key ' cat > .git/config <<\EOF @@ -212,9 +204,7 @@ test_expect_success 'really really mean test' ' ' test_expect_success 'get value' ' - echo alpha >expect && - git config beta.haha >actual && - test_cmp expect actual + test_cmp_config alpha beta.haha ' cat > expect << EOF @@ -251,15 +241,11 @@ test_expect_success 'non-match' ' ' test_expect_success 'non-match value' ' - echo wow >expect && - git config --get nextsection.nonewline !for >actual && - test_cmp expect actual + test_cmp_config wow --get nextsection.nonewline !for ' test_expect_success 'multi-valued get returns final one' ' - echo "wow2 for me" >expect && - git config --get nextsection.nonewline >actual && - test_cmp expect actual + test_cmp_config "wow2 for me" --get nextsection.nonewline ' test_expect_success 'multi-valued get-all returns all' ' @@ -520,21 +506,11 @@ test_expect_success 'editing stdin is an error' ' test_expect_success 'refer config from subdirectory' ' mkdir x && - ( - cd x && - echo strasse >expect && - git config --get --file ../other-config ein.bahn >actual && - test_cmp expect actual - ) - + test_cmp_config -C x strasse --get --file ../other-config ein.bahn ' test_expect_success 'refer config from subdirectory via --file' ' - ( - cd x && - git config --file=../other-config --get ein.bahn >actual && - test_cmp expect actual - ) + test_cmp_config -C x strasse --file=../other-config --get ein.bahn ' cat > expect << EOF @@ -688,16 +664,13 @@ test_expect_success numbers ' test_expect_success '--int is at least 64 bits' ' git config giga.watts 121g && - echo 129922760704 >expect && - git config --int --get giga.watts >actual && - test_cmp expect actual + echo >expect && + test_cmp_config 129922760704 --int --get giga.watts ' test_expect_success 'invalid unit' ' git config aninvalid.unit "1auto" && - echo 1auto >expect && - git config aninvalid.unit >actual && - test_cmp expect actual && + test_cmp_config 1auto aninvalid.unit && test_must_fail git config --int --get aninvalid.unit 2>actual && test_i18ngrep "bad numeric config value .1auto. for .aninvalid.unit. in file .git/config: invalid unit" actual ' @@ -1039,9 +1012,7 @@ test_expect_success '--null --get-regexp' ' test_expect_success 'inner whitespace kept verbatim' ' git config section.val "foo bar" && - echo "foo bar" >expect && - git config section.val >actual && - test_cmp expect actual + test_cmp_config "foo bar" section.val ' test_expect_success SYMLINKS 'symlinked configuration' ' @@ -1809,21 +1780,15 @@ big = 1M EOF test_expect_success 'identical modern --type specifiers are allowed' ' - git config --type=int --type=int core.big >actual && - echo 1048576 >expect && - test_cmp expect actual + test_cmp_config 1048576 --type=int --type=int core.big ' test_expect_success 'identical legacy --type specifiers are allowed' ' - git config --int --int core.big >actual && - echo 1048576 >expect && - test_cmp expect actual + test_cmp_config 1048576 --int --int core.big ' test_expect_success 'identical mixed --type specifiers are allowed' ' - git config --int --type=int core.big >actual && - echo 1048576 >expect && - test_cmp expect actual + test_cmp_config 1048576 --int --type=int core.big ' test_expect_success 'non-identical modern --type specifiers are not allowed' ' @@ -1842,21 +1807,15 @@ test_expect_success 'non-identical mixed --type specifiers are not allowed' ' ' test_expect_success '--type allows valid type specifiers' ' - echo "true" >expect && - git config --type=bool core.foo >actual && - test_cmp expect actual + test_cmp_config true --type=bool core.foo ' test_expect_success '--no-type unsets type specifiers' ' - echo "10" >expect && - git config --type=bool --no-type core.number >actual && - test_cmp expect actual + test_cmp_config 10 --type=bool --no-type core.number ' test_expect_success 'unset type specifiers may be reset to conflicting ones' ' - echo 1048576 >expect && - git config --type=bool --no-type --type=int core.big >actual && - test_cmp expect actual + test_cmp_config 1048576 --type=bool --no-type --type=int core.big ' test_expect_success '--type rejects unknown specifiers' ' diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 388b0611d8..3e053532eb 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -368,4 +368,19 @@ test_expect_success 'continue walking past root commits' ' ) ' +test_expect_success 'expire with multiple worktrees' ' + git init main-wt && + ( + cd main-wt && + test_tick && + test_commit foo && + git worktree add link-wt && + test_tick && + test_commit -C link-wt foobar && + test_tick && + git reflog expire --verbose --all --expire=$test_tick && + test_must_be_empty .git/worktrees/link-wt/logs/HEAD + ) +' + test_done diff --git a/t/t1415-worktree-refs.sh b/t/t1415-worktree-refs.sh new file mode 100755 index 0000000000..b664e51250 --- /dev/null +++ b/t/t1415-worktree-refs.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description='per-worktree refs' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit initial && + test_commit wt1 && + test_commit wt2 && + git worktree add wt1 wt1 && + git worktree add wt2 wt2 && + git checkout initial && + git update-ref refs/worktree/foo HEAD && + git -C wt1 update-ref refs/worktree/foo HEAD && + git -C wt2 update-ref refs/worktree/foo HEAD +' + +test_expect_success 'refs/worktree must not be packed' ' + git pack-refs --all && + test_path_is_missing .git/refs/tags/wt1 && + test_path_is_file .git/refs/worktree/foo && + test_path_is_file .git/worktrees/wt1/refs/worktree/foo && + test_path_is_file .git/worktrees/wt2/refs/worktree/foo +' + +test_expect_success 'refs/worktree are per-worktree' ' + test_cmp_rev worktree/foo initial && + ( cd wt1 && test_cmp_rev worktree/foo wt1 ) && + ( cd wt2 && test_cmp_rev worktree/foo wt2 ) +' + +test_expect_success 'resolve main-worktree/HEAD' ' + test_cmp_rev main-worktree/HEAD initial && + ( cd wt1 && test_cmp_rev main-worktree/HEAD initial ) && + ( cd wt2 && test_cmp_rev main-worktree/HEAD initial ) +' + +test_expect_success 'ambiguous main-worktree/HEAD' ' + mkdir -p .git/refs/heads/main-worktree && + test_when_finished rm -f .git/refs/heads/main-worktree/HEAD && + cp .git/HEAD .git/refs/heads/main-worktree/HEAD && + git rev-parse main-worktree/HEAD 2>warn && + grep "main-worktree/HEAD.*ambiguous" warn +' + +test_expect_success 'resolve worktrees/xx/HEAD' ' + test_cmp_rev worktrees/wt1/HEAD wt1 && + ( cd wt1 && test_cmp_rev worktrees/wt1/HEAD wt1 ) && + ( cd wt2 && test_cmp_rev worktrees/wt1/HEAD wt1 ) +' + +test_expect_success 'ambiguous worktrees/xx/HEAD' ' + mkdir -p .git/refs/heads/worktrees/wt1 && + test_when_finished rm -f .git/refs/heads/worktrees/wt1/HEAD && + cp .git/HEAD .git/refs/heads/worktrees/wt1/HEAD && + git rev-parse worktrees/wt1/HEAD 2>warn && + grep "worktrees/wt1/HEAD.*ambiguous" warn +' + +test_expect_success 'reflog of main-worktree/HEAD' ' + git reflog HEAD | sed "s/HEAD/main-worktree\/HEAD/" >expected && + git reflog main-worktree/HEAD >actual && + test_cmp expected actual && + git -C wt1 reflog main-worktree/HEAD >actual.wt1 && + test_cmp expected actual.wt1 +' + +test_expect_success 'reflog of worktrees/xx/HEAD' ' + git -C wt2 reflog HEAD | sed "s/HEAD/worktrees\/wt2\/HEAD/" >expected && + git reflog worktrees/wt2/HEAD >actual && + test_cmp expected actual && + git -C wt1 reflog worktrees/wt2/HEAD >actual.wt1 && + test_cmp expected actual.wt1 && + git -C wt2 reflog worktrees/wt2/HEAD >actual.wt2 && + test_cmp expected actual.wt2 +' + +test_done diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 0f2dd26f74..e20e8fa830 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -101,6 +101,41 @@ test_expect_success 'HEAD link pointing at a funny place' ' grep "HEAD points to something strange" out ' +test_expect_success 'HEAD link pointing at a funny object (from different wt)' ' + test_when_finished "mv .git/SAVED_HEAD .git/HEAD" && + test_when_finished "rm -rf .git/worktrees wt" && + git worktree add wt && + mv .git/HEAD .git/SAVED_HEAD && + echo $ZERO_OID >.git/HEAD && + # avoid corrupt/broken HEAD from interfering with repo discovery + test_must_fail git -C wt fsck 2>out && + grep "main-worktree/HEAD: detached HEAD points" out +' + +test_expect_success 'other worktree HEAD link pointing at a funny object' ' + test_when_finished "rm -rf .git/worktrees other" && + git worktree add other && + echo $ZERO_OID >.git/worktrees/other/HEAD && + test_must_fail git fsck 2>out && + grep "worktrees/other/HEAD: detached HEAD points" out +' + +test_expect_success 'other worktree HEAD link pointing at missing object' ' + test_when_finished "rm -rf .git/worktrees other" && + git worktree add other && + echo "Contents missing from repo" | git hash-object --stdin >.git/worktrees/other/HEAD && + test_must_fail git fsck 2>out && + grep "worktrees/other/HEAD: invalid sha1 pointer" out +' + +test_expect_success 'other worktree HEAD link pointing at a funny place' ' + test_when_finished "rm -rf .git/worktrees other" && + git worktree add other && + echo "ref: refs/funny/place" >.git/worktrees/other/HEAD && + test_must_fail git fsck 2>out && + grep "worktrees/other/HEAD points to something strange" out +' + test_expect_success 'email without @ is okay' ' git cat-file commit HEAD >basis && sed "s/@/AT/" basis >okay && @@ -673,16 +708,35 @@ test_expect_success 'fsck detects trailing loose garbage (commit)' ' test_i18ngrep "garbage.*$commit" out ' -test_expect_success 'fsck detects trailing loose garbage (blob)' ' +test_expect_success 'fsck detects trailing loose garbage (large blob)' ' blob=$(echo trailing | git hash-object -w --stdin) && file=$(sha1_file $blob) && test_when_finished "remove_object $blob" && chmod +w "$file" && echo garbage >>"$file" && - test_must_fail git fsck 2>out && + test_must_fail git -c core.bigfilethreshold=5 fsck 2>out && test_i18ngrep "garbage.*$blob" out ' +test_expect_success 'fsck detects truncated loose object' ' + # make it big enough that we know we will truncate in the data + # portion, not the header + test-tool genrandom truncate 4096 >file && + blob=$(git hash-object -w file) && + file=$(sha1_file $blob) && + test_when_finished "remove_object $blob" && + test_copy_bytes 1024 <"$file" >tmp && + rm "$file" && + mv -f tmp "$file" && + + # check both regular and streaming code paths + test_must_fail git fsck 2>out && + test_i18ngrep corrupt.*$blob out && + + test_must_fail git -c core.bigfilethreshold=128 fsck 2>out && + test_i18ngrep corrupt.*$blob out +' + # for each of type, we have one version which is referenced by another object # (and so while unreachable, not dangling), and another variant which really is # dangling. diff --git a/t/t2029-worktree-config.sh b/t/t2029-worktree-config.sh new file mode 100755 index 0000000000..286121d8de --- /dev/null +++ b/t/t2029-worktree-config.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description="config file in multi worktree" + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit start +' + +test_expect_success 'config --worktree in single worktree' ' + git config --worktree foo.bar true && + test_cmp_config true foo.bar +' + +test_expect_success 'add worktrees' ' + git worktree add wt1 && + git worktree add wt2 +' + +test_expect_success 'config --worktree without extension' ' + test_must_fail git config --worktree foo.bar false +' + +test_expect_success 'enable worktreeConfig extension' ' + git config extensions.worktreeConfig true && + test_cmp_config true extensions.worktreeConfig +' + +test_expect_success 'config is shared as before' ' + git config this.is shared && + test_cmp_config shared this.is && + test_cmp_config -C wt1 shared this.is && + test_cmp_config -C wt2 shared this.is +' + +test_expect_success 'config is shared (set from another worktree)' ' + git -C wt1 config that.is also-shared && + test_cmp_config also-shared that.is && + test_cmp_config -C wt1 also-shared that.is && + test_cmp_config -C wt2 also-shared that.is +' + +test_expect_success 'config private to main worktree' ' + git config --worktree this.is for-main && + test_cmp_config for-main this.is && + test_cmp_config -C wt1 shared this.is && + test_cmp_config -C wt2 shared this.is +' + +test_expect_success 'config private to linked worktree' ' + git -C wt1 config --worktree this.is for-wt1 && + test_cmp_config for-main this.is && + test_cmp_config -C wt1 for-wt1 this.is && + test_cmp_config -C wt2 shared this.is +' + +test_expect_success 'core.bare no longer for main only' ' + test_config core.bare true && + test "$(git rev-parse --is-bare-repository)" = true && + test "$(git -C wt1 rev-parse --is-bare-repository)" = true && + test "$(git -C wt2 rev-parse --is-bare-repository)" = true +' + +test_expect_success 'per-worktree core.bare is picked up' ' + git -C wt1 config --worktree core.bare true && + test "$(git rev-parse --is-bare-repository)" = false && + test "$(git -C wt1 rev-parse --is-bare-repository)" = true && + test "$(git -C wt2 rev-parse --is-bare-repository)" = false +' + +test_expect_success 'config.worktree no longer read without extension' ' + git config --unset extensions.worktreeConfig && + test_cmp_config shared this.is && + test_cmp_config -C wt1 shared this.is && + test_cmp_config -C wt2 shared this.is +' + +test_done diff --git a/t/t3070-wildmatch.sh b/t/t3070-wildmatch.sh index 46aca0af10..891d4d7cb9 100755 --- a/t/t3070-wildmatch.sh +++ b/t/t3070-wildmatch.sh @@ -237,7 +237,7 @@ match 0 0 0 0 foobar 'foo\*bar' match 1 1 1 1 'f\oo' 'f\\oo' match 1 1 1 1 ball '*[al]?' match 0 0 0 0 ten '[ten]' -match 0 0 1 1 ten '**[!te]' +match 1 1 1 1 ten '**[!te]' match 0 0 0 0 ten '**[!ten]' match 1 1 1 1 ten 't[a-g]n' match 0 0 0 0 ten 't[!a-g]n' @@ -253,7 +253,7 @@ match 1 1 1 1 ']' ']' # Extended slash-matching features match 0 0 1 1 'foo/baz/bar' 'foo*bar' match 0 0 1 1 'foo/baz/bar' 'foo**bar' -match 0 0 1 1 'foobazbar' 'foo**bar' +match 1 1 1 1 'foobazbar' 'foo**bar' match 1 1 1 1 'foo/baz/bar' 'foo/**/bar' match 1 1 0 0 'foo/baz/bar' 'foo/**/**/bar' match 1 1 1 1 'foo/b/a/z/bar' 'foo/**/bar' diff --git a/t/t3206-range-diff.sh b/t/t3206-range-diff.sh index 6aae364171..e497c1358f 100755 --- a/t/t3206-range-diff.sh +++ b/t/t3206-range-diff.sh @@ -122,6 +122,36 @@ test_expect_success 'changed commit' ' test_cmp expected actual ' +test_expect_success 'changed commit with --no-patch diff option' ' + git range-diff --no-color --no-patch topic...changed >actual && + cat >expected <<-EOF && + 1: 4de457d = 1: a4b3333 s/5/A/ + 2: fccce22 = 2: f51d370 s/4/A/ + 3: 147e64e ! 3: 0559556 s/11/B/ + 4: a63e992 ! 4: d966c5c s/12/B/ + EOF + test_cmp expected actual +' + +test_expect_success 'changed commit with --stat diff option' ' + git range-diff --no-color --stat topic...changed >actual && + cat >expected <<-EOF && + 1: 4de457d = 1: a4b3333 s/5/A/ + a => b | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + 2: fccce22 = 2: f51d370 s/4/A/ + a => b | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + 3: 147e64e ! 3: 0559556 s/11/B/ + a => b | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + 4: a63e992 ! 4: d966c5c s/12/B/ + a => b | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + EOF + test_cmp expected actual +' + test_expect_success 'changed commit with sm config' ' git range-diff --no-color --submodule=log topic...changed >actual && cat >expected <<-EOF && diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index f6737e162f..7a440e08d8 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -322,7 +322,7 @@ test_expect_success 'retain authorship when squashing' ' git show HEAD | grep "^Author: Twerp Snog" ' -test_expect_success '-p handles "no changes" gracefully' ' +test_expect_success REBASE_P '-p handles "no changes" gracefully' ' HEAD=$(git rev-parse HEAD) && set_fake_editor && git rebase -i -p HEAD^ && @@ -332,7 +332,7 @@ test_expect_success '-p handles "no changes" gracefully' ' test $HEAD = $(git rev-parse HEAD) ' -test_expect_failure 'exchange two commits with -p' ' +test_expect_failure REBASE_P 'exchange two commits with -p' ' git checkout H && set_fake_editor && FAKE_LINES="2 1" git rebase -i -p HEAD~2 && @@ -340,7 +340,7 @@ test_expect_failure 'exchange two commits with -p' ' test G = $(git cat-file commit HEAD | sed -ne \$p) ' -test_expect_success 'preserve merges with -p' ' +test_expect_success REBASE_P 'preserve merges with -p' ' git checkout -b to-be-preserved master^ && : > unrelated-file && git add unrelated-file && @@ -383,7 +383,7 @@ test_expect_success 'preserve merges with -p' ' test $(git show HEAD:unrelated-file) = 1 ' -test_expect_success 'edit ancestor with -p' ' +test_expect_success REBASE_P 'edit ancestor with -p' ' set_fake_editor && FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 && echo 2 > unrelated-file && @@ -397,6 +397,7 @@ test_expect_success 'edit ancestor with -p' ' ' test_expect_success '--continue tries to commit' ' + git reset --hard D && test_tick && set_fake_editor && test_must_fail git rebase -i --onto new-branch1 HEAD^ && @@ -436,7 +437,7 @@ test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' ' git rebase -i $base && test $base = $(git rev-parse HEAD^) && test 0 = $(git show | grep NEVER | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D multi-fixup ' @@ -451,7 +452,7 @@ test_expect_success 'commit message used after conflict' ' git rebase --continue && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D conflict-fixup ' @@ -466,7 +467,7 @@ test_expect_success 'commit message retained after conflict' ' git rebase --continue && test $base = $(git rev-parse HEAD^) && test 2 = $(git show | grep TWICE | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D conflict-squash ' @@ -491,7 +492,7 @@ test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messa grep "^# This is a combination of 3 commits\." && git cat-file commit HEAD@{3} | grep "^# This is a combination of 2 commits\." && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D squash-fixup ' @@ -504,7 +505,7 @@ test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' ' git rebase -i $base && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D skip-comments ' @@ -517,7 +518,7 @@ test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' ' git rebase -i $base && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D skip-blank-lines ' @@ -658,7 +659,7 @@ test_expect_success 'rebase with a file named HEAD in worktree' ' ) && set_fake_editor && - FAKE_LINES="1 squash 2" git rebase -i to-be-rebased && + FAKE_LINES="1 squash 2" git rebase -i @{-1} && test "$(git show -s --pretty=format:%an)" = "Squashed Away" ' diff --git a/t/t3408-rebase-multi-line.sh b/t/t3408-rebase-multi-line.sh index e7292f5b9b..d2bd7c17b0 100755 --- a/t/t3408-rebase-multi-line.sh +++ b/t/t3408-rebase-multi-line.sh @@ -52,7 +52,7 @@ test_expect_success rebase ' test_cmp expect actual ' -test_expect_success rebasep ' +test_expect_success REBASE_P rebasep ' git checkout side-merge && git rebase -p side && diff --git a/t/t3409-rebase-preserve-merges.sh b/t/t3409-rebase-preserve-merges.sh index 8c251c57a6..3b340f1ece 100755 --- a/t/t3409-rebase-preserve-merges.sh +++ b/t/t3409-rebase-preserve-merges.sh @@ -8,6 +8,11 @@ Run "git rebase -p" and check that merges are properly carried along ' . ./test-lib.sh +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + GIT_AUTHOR_EMAIL=bogus_email_address export GIT_AUTHOR_EMAIL diff --git a/t/t3410-rebase-preserve-dropped-merges.sh b/t/t3410-rebase-preserve-dropped-merges.sh index 6f73b95558..2e29866993 100755 --- a/t/t3410-rebase-preserve-dropped-merges.sh +++ b/t/t3410-rebase-preserve-dropped-merges.sh @@ -11,6 +11,11 @@ rewritten. ' . ./test-lib.sh +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + # set up two branches like this: # # A - B - C - D - E diff --git a/t/t3411-rebase-preserve-around-merges.sh b/t/t3411-rebase-preserve-around-merges.sh index dc81bf27eb..fb45e7bf7b 100755 --- a/t/t3411-rebase-preserve-around-merges.sh +++ b/t/t3411-rebase-preserve-around-merges.sh @@ -10,6 +10,11 @@ a merge to before the merge. ' . ./test-lib.sh +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + . "$TEST_DIRECTORY"/lib-rebase.sh set_fake_editor diff --git a/t/t3412-rebase-root.sh b/t/t3412-rebase-root.sh index 73a39f2923..21632a984e 100755 --- a/t/t3412-rebase-root.sh +++ b/t/t3412-rebase-root.sh @@ -86,14 +86,14 @@ test_expect_success 'pre-rebase got correct input (4)' ' test "z$(cat .git/PRE-REBASE-INPUT)" = z--root,work4 ' -test_expect_success 'rebase -i -p with linear history' ' +test_expect_success REBASE_P 'rebase -i -p with linear history' ' git checkout -b work5 other && git rebase -i -p --root --onto master && git log --pretty=tformat:"%s" > rebased5 && test_cmp expect rebased5 ' -test_expect_success 'pre-rebase got correct input (5)' ' +test_expect_success REBASE_P 'pre-rebase got correct input (5)' ' test "z$(cat .git/PRE-REBASE-INPUT)" = z--root, ' @@ -120,7 +120,7 @@ commit work6~4 1 EOF -test_expect_success 'rebase -i -p with merge' ' +test_expect_success REBASE_P 'rebase -i -p with merge' ' git checkout -b work6 other && git rebase -i -p --root --onto master && log_with_names work6 > rebased6 && @@ -155,7 +155,7 @@ commit work7~5 1 EOF -test_expect_success 'rebase -i -p with two roots' ' +test_expect_success REBASE_P 'rebase -i -p with two roots' ' git checkout -b work7 other && git rebase -i -p --root --onto master && log_with_names work7 > rebased7 && @@ -261,7 +261,7 @@ commit conflict3~6 1 EOF -test_expect_success 'rebase -i -p --root with conflict (first part)' ' +test_expect_success REBASE_P 'rebase -i -p --root with conflict (first part)' ' git checkout -b conflict3 other && test_must_fail git rebase -i -p --root --onto master && git ls-files -u | grep "B$" @@ -272,7 +272,7 @@ test_expect_success 'fix the conflict' ' git add B ' -test_expect_success 'rebase -i -p --root with conflict (second part)' ' +test_expect_success REBASE_P 'rebase -i -p --root with conflict (second part)' ' git rebase --continue && log_with_names conflict3 >out && test_cmp expect-conflict-p out diff --git a/t/t3414-rebase-preserve-onto.sh b/t/t3414-rebase-preserve-onto.sh index ee0a6cccfd..72e04b5386 100755 --- a/t/t3414-rebase-preserve-onto.sh +++ b/t/t3414-rebase-preserve-onto.sh @@ -10,6 +10,11 @@ aren'"'"'t on top of $ONTO, even if they are on top of $UPSTREAM. ' . ./test-lib.sh +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + . "$TEST_DIRECTORY"/lib-rebase.sh # Set up branches like this: diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index 4c3f7d8dfe..0210b2ac6f 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -106,7 +106,7 @@ test_expect_success 'rebase -i --continue handles merge strategy and options' ' test -f funny.was.run ' -test_expect_success 'rebase passes merge strategy options correctly' ' +test_expect_success REBASE_P 'rebase passes merge strategy options correctly' ' rm -fr .git/rebase-* && git reset --hard commit-new-file-F3-on-topic-branch && test_commit theirs-to-merge && @@ -177,6 +177,7 @@ test_expect_success 'setup rerere database' ' git checkout master && test_commit "commit-new-file-F3" F3 3 && test_config rerere.enabled true && + git update-ref refs/heads/topic commit-new-file-F3-on-topic-branch && test_must_fail git rebase -m master topic && echo "Resolved" >F2 && cp F2 expected-F2 && @@ -240,7 +241,7 @@ test_rerere_autoupdate test_rerere_autoupdate -m GIT_SEQUENCE_EDITOR=: && export GIT_SEQUENCE_EDITOR test_rerere_autoupdate -i -test_rerere_autoupdate --preserve-merges +test_have_prereq !REBASE_P || test_rerere_autoupdate --preserve-merges unset GIT_SEQUENCE_EDITOR test_expect_success 'the todo command "break" works' ' diff --git a/t/t3420-rebase-autostash.sh b/t/t3420-rebase-autostash.sh index f355c6825a..4c7494cc8f 100755 --- a/t/t3420-rebase-autostash.sh +++ b/t/t3420-rebase-autostash.sh @@ -361,4 +361,12 @@ test_expect_success 'autostash with dirty submodules' ' git rebase -i --autostash HEAD ' +test_expect_success 'branch is left alone when possible' ' + git checkout -b unchanged-branch && + echo changed >file0 && + git rebase --autostash unchanged-branch && + test changed = "$(cat file0)" && + test unchanged-branch = "$(git rev-parse --abbrev-ref HEAD)" +' + test_done diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 99b2aac921..23ad4cff35 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -29,7 +29,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -43,7 +43,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -59,7 +59,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -73,7 +73,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p # f # / @@ -113,7 +113,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -128,7 +128,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -143,7 +143,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -158,7 +158,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p # a---b---c---j! # \ @@ -186,7 +186,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -201,7 +201,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -216,7 +216,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase success --rebase-merges # m @@ -256,7 +256,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -271,7 +271,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -286,7 +286,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -302,7 +302,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -317,7 +317,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -331,7 +331,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -346,6 +346,6 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_done diff --git a/t/t3425-rebase-topology-merges.sh b/t/t3425-rebase-topology-merges.sh index 846f85c27e..5f892e33d7 100755 --- a/t/t3425-rebase-topology-merges.sh +++ b/t/t3425-rebase-topology-merges.sh @@ -109,6 +109,11 @@ test_run_rebase success 'd e n o' '' test_run_rebase success 'd e n o' -m test_run_rebase success 'd n o e' -i +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + test_expect_success "rebase -p is no-op in non-linear history" " reset_rebase && git rebase -p d w && diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh index aa7bfc88ec..cc5646836f 100755 --- a/t/t3430-rebase-merges.sh +++ b/t/t3430-rebase-merges.sh @@ -396,4 +396,20 @@ test_expect_success 'with --autosquash and --exec' ' grep "G: +G" actual ' +test_expect_success '--continue after resolving conflicts after a merge' ' + git checkout -b already-has-g E && + git cherry-pick E..G && + test_commit H2 && + + git checkout -b conflicts-in-merge H && + test_commit H2 H2.t conflicts H2-conflict && + test_must_fail git rebase -r already-has-g && + grep conflicts H2.t && + echo resolved >H2.t && + git add -u && + git rebase --continue && + test_must_fail git rev-parse --verify HEAD^2 && + test_path_is_missing .git/MERGE_HEAD +' + test_done diff --git a/t/t4136-apply-check.sh b/t/t4136-apply-check.sh index 6d92872318..4c3f264a63 100755 --- a/t/t4136-apply-check.sh +++ b/t/t4136-apply-check.sh @@ -29,6 +29,18 @@ test_expect_success 'apply exits non-zero with no-op patch' ' test_must_fail git apply --check input ' +test_expect_success '`apply --recount` allows no-op patch' ' + echo 1 >1 && + git apply --recount --check <<-\EOF + diff --get a/1 b/1 + index 6696ea4..606eddd 100644 + --- a/1 + +++ b/1 + @@ -1,1 +1,1 @@ + 1 + EOF +' + test_expect_success 'invalid combination: create and copy' ' test_must_fail git apply --check - <<-\EOF diff --git a/1 b/2 diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 6c620cd540..410a09b0dd 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -468,29 +468,32 @@ test_expect_success 'pack-objects in too-many-packs mode' ' git fsck ' -# -# WARNING! -# -# The following test is destructive. Please keep the next -# two tests at the end of this file. -# - -test_expect_success \ - 'fake a SHA1 hash collision' \ - 'long_a=$(git hash-object a | sed -e "s!^..!&/!") && - long_b=$(git hash-object b | sed -e "s!^..!&/!") && - test -f .git/objects/$long_b && - cp -f .git/objects/$long_a \ - .git/objects/$long_b' +test_expect_success 'setup: fake a SHA1 hash collision' ' + git init corrupt && + ( + cd corrupt && + long_a=$(git hash-object -w ../a | sed -e "s!^..!&/!") && + long_b=$(git hash-object -w ../b | sed -e "s!^..!&/!") && + test -f .git/objects/$long_b && + cp -f .git/objects/$long_a \ + .git/objects/$long_b + ) +' -test_expect_success \ - 'make sure index-pack detects the SHA1 collision' \ - 'test_must_fail git index-pack -o bad.idx test-3.pack 2>msg && - test_i18ngrep "SHA1 COLLISION FOUND" msg' +test_expect_success 'make sure index-pack detects the SHA1 collision' ' + ( + cd corrupt && + test_must_fail git index-pack -o ../bad.idx ../test-3.pack 2>msg && + test_i18ngrep "SHA1 COLLISION FOUND" msg + ) +' -test_expect_success \ - 'make sure index-pack detects the SHA1 collision (large blobs)' \ - 'test_must_fail git -c core.bigfilethreshold=1 index-pack -o bad.idx test-3.pack 2>msg && - test_i18ngrep "SHA1 COLLISION FOUND" msg' +test_expect_success 'make sure index-pack detects the SHA1 collision (large blobs)' ' + ( + cd corrupt && + test_must_fail git -c core.bigfilethreshold=1 index-pack -o ../bad.idx ../test-3.pack 2>msg && + test_i18ngrep "SHA1 COLLISION FOUND" msg + ) +' test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 1be3459c5b..82d7f7f6a5 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -191,6 +191,7 @@ test_expect_success 'pack-objects respects --honor-pack-keep (local bitmapped pa test_expect_success 'pack-objects respects --local (non-local bitmapped pack)' ' mv .git/objects/pack/$packbitmap.* alt.git/objects/pack/ && + rm -f .git/objects/pack/multi-pack-index && test_when_finished "mv alt.git/objects/pack/$packbitmap.* .git/objects/pack/" && echo HEAD | git pack-objects --local --stdout --revs >3b.pack && git index-pack 3b.pack && diff --git a/t/t5319-multi-pack-index.sh b/t/t5319-multi-pack-index.sh index bd8e841b81..70926b5bc0 100755 --- a/t/t5319-multi-pack-index.sh +++ b/t/t5319-multi-pack-index.sh @@ -271,7 +271,7 @@ test_expect_success 'git-fsck incorrect offset' ' test_expect_success 'repack removes multi-pack-index' ' test_path_is_file $objdir/pack/multi-pack-index && - git repack -adf && + GIT_TEST_MULTI_PACK_INDEX=0 git repack -adf && test_path_is_missing $objdir/pack/multi-pack-index ' diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index bc5703ff9b..91ee6841c1 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -302,4 +302,22 @@ test_expect_success 'ls-remote works outside repository' ' nongit git ls-remote dst.git ' +test_expect_success 'ls-remote patterns work with all protocol versions' ' + git for-each-ref --format="%(objectname) %(refname)" \ + refs/heads/master refs/remotes/origin/master >expect && + git -c protocol.version=1 ls-remote . master >actual.v1 && + test_cmp expect actual.v1 && + git -c protocol.version=2 ls-remote . master >actual.v2 && + test_cmp expect actual.v2 +' + +test_expect_success 'ls-remote prefixes work with all protocol versions' ' + git for-each-ref --format="%(objectname) %(refname)" \ + refs/heads/ refs/tags/ >expect && + git -c protocol.version=1 ls-remote --heads --tags . >actual.v1 && + test_cmp expect actual.v1 && + git -c protocol.version=2 ls-remote --heads --tags . >actual.v2 && + test_cmp expect actual.v2 +' + test_done diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index 5e501c8b08..cf4cc32fd0 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -461,7 +461,8 @@ test_expect_success 'pull.rebase=1 is treated as true and flattens keep-merge' ' test file3 = "$(git show HEAD:file3.t)" ' -test_expect_success 'pull.rebase=preserve rebases and merges keep-merge' ' +test_expect_success REBASE_P \ + 'pull.rebase=preserve rebases and merges keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase preserve && git pull . copy && @@ -514,7 +515,8 @@ test_expect_success '--rebase=true rebases and flattens keep-merge' ' test file3 = "$(git show HEAD:file3.t)" ' -test_expect_success '--rebase=preserve rebases and merges keep-merge' ' +test_expect_success REBASE_P \ + '--rebase=preserve rebases and merges keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase true && git pull --rebase=preserve . copy && diff --git a/t/t5573-pull-verify-signatures.sh b/t/t5573-pull-verify-signatures.sh index 747775c147..3e9876e197 100755 --- a/t/t5573-pull-verify-signatures.sh +++ b/t/t5573-pull-verify-signatures.sh @@ -78,4 +78,11 @@ test_expect_success GPG 'pull commit with bad signature with --no-verify-signatu git pull --ff-only --no-verify-signatures bad 2>pullerror ' +test_expect_success GPG 'pull unsigned commit into unborn branch' ' + git init empty-repo && + test_must_fail \ + git -C empty-repo pull --verify-signatures .. 2>pullerror && + test_i18ngrep "does not have a GPG signature" pullerror +' + test_done diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh index 6ab8dea8cd..0f2b09ebb8 100755 --- a/t/t5702-protocol-v2.sh +++ b/t/t5702-protocol-v2.sh @@ -537,6 +537,56 @@ test_expect_success 'push with http:// and a config of v2 does not request v2' ' ! grep "git< version 2" log ' +test_expect_success 'when server sends "ready", expect DELIM' ' + rm -rf "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" http_child && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one && + + git clone "$HTTPD_URL/smart/http_parent" http_child && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + # After "ready" in the acknowledgments section, pretend that a FLUSH + # (0000) was sent instead of a DELIM (0001). + printf "/ready/,$ s/0001/0000/" \ + >"$HTTPD_ROOT_PATH/one-time-sed" && + + test_must_fail git -C http_child -c protocol.version=2 \ + fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && + test_i18ngrep "expected packfile to be sent after .ready." err +' + +test_expect_success 'when server does not send "ready", expect FLUSH' ' + rm -rf "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" http_child log && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one && + + git clone "$HTTPD_URL/smart/http_parent" http_child && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + # Create many commits to extend the negotiation phase across multiple + # requests, so that the server does not send "ready" in the first + # request. + for i in $(test_seq 1 32) + do + test_commit -C http_child c$i + done && + + # After the acknowledgments section, pretend that a DELIM + # (0001) was sent instead of a FLUSH (0000). + printf "/acknowledgments/,$ s/0000/0001/" \ + >"$HTTPD_ROOT_PATH/one-time-sed" && + + test_must_fail env GIT_TRACE_PACKET="$(pwd)/log" git -C http_child \ + -c protocol.version=2 \ + fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && + grep "fetch< acknowledgments" log && + ! grep "fetch< ready" log && + test_i18ngrep "expected no other sections to be sent after no .ready." err +' stop_httpd diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index fb4d295aa0..0507999729 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -90,11 +90,18 @@ test_expect_success 'rev-list can show index objects' ' 9200b628cf9dc883a85a7abc8d6e6730baee589c two EOF echo only-in-index >only-in-index && + test_when_finished "git reset --hard" && git add only-in-index && git rev-list --objects --indexed-objects >actual && test_cmp expect actual ' +test_expect_success 'rev-list can negate index objects' ' + git rev-parse HEAD >expect && + git rev-list -1 --objects HEAD --not --indexed-objects >actual && + test_cmp expect actual +' + test_expect_success '--bisect and --first-parent can not be combined' ' test_must_fail git rev-list --bisect --first-parent HEAD ' diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index b5a1190ffe..a10f0df02b 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -12,6 +12,22 @@ unnote () { git name-rev --tags --stdin | sed -e "s|$OID_REGEX (tags/\([^)]*\)) |\1 |g" } +# +# Create a test repo with interesting commit graph: +# +# A--B----------G--H--I--K--L +# \ \ / / +# \ \ / / +# C------E---F J +# \_/ +# +# The commits are laid out from left-to-right starting with +# the root commit A and terminating at the tip commit L. +# +# There are a few places where we adjust the commit date or +# author date to make the --topo-order, --date-order, and +# --author-date-order flags produce different output. + test_expect_success setup ' echo "Hi there" >file && echo "initial" >lost && @@ -21,10 +37,18 @@ test_expect_success setup ' git branch other-branch && + git symbolic-ref HEAD refs/heads/unrelated && + git rm -f "*" && + echo "Unrelated branch" >side && + git add side && + test_tick && git commit -m "Side root" && + note J && + git checkout master && + echo "Hello" >file && echo "second" >lost && git add file lost && - test_tick && git commit -m "Modified file and lost" && + test_tick && GIT_AUTHOR_DATE=$(($test_tick + 120)) git commit -m "Modified file and lost" && note B && git checkout other-branch && @@ -63,13 +87,6 @@ test_expect_success setup ' test_tick && git commit -a -m "Final change" && note I && - git symbolic-ref HEAD refs/heads/unrelated && - git rm -f "*" && - echo "Unrelated branch" >side && - git add side && - test_tick && git commit -m "Side root" && - note J && - git checkout master && test_tick && git merge --allow-unrelated-histories -m "Coolest" unrelated && note K && @@ -103,14 +120,24 @@ check_result () { check_outcome success "$@" } -check_result 'L K J I H G F E D C B A' --full-history +check_result 'L K J I H F E D C G B A' --full-history --topo-order +check_result 'L K I H G F E D C B J A' --full-history +check_result 'L K I H G F E D C B J A' --full-history --date-order +check_result 'L K I H G F E D B C J A' --full-history --author-date-order check_result 'K I H E C B A' --full-history -- file check_result 'K I H E C B A' --full-history --topo-order -- file check_result 'K I H E C B A' --full-history --date-order -- file +check_result 'K I H E B C A' --full-history --author-date-order -- file check_result 'I E C B A' --simplify-merges -- file +check_result 'I E C B A' --simplify-merges --topo-order -- file +check_result 'I E C B A' --simplify-merges --date-order -- file +check_result 'I E B C A' --simplify-merges --author-date-order -- file check_result 'I B A' -- file check_result 'I B A' --topo-order -- file +check_result 'I B A' --date-order -- file +check_result 'I B A' --author-date-order -- file check_result 'H' --first-parent -- another-file +check_result 'H' --first-parent --topo-order -- another-file check_result 'E C B A' --full-history E -- lost test_expect_success 'full history simplification without parent' ' diff --git a/t/t6018-rev-list-glob.sh b/t/t6018-rev-list-glob.sh index db8a7834d8..bb5aeac07f 100755 --- a/t/t6018-rev-list-glob.sh +++ b/t/t6018-rev-list-glob.sh @@ -36,7 +36,13 @@ test_expect_success 'setup' ' git tag foo/bar master && commit master3 && git update-ref refs/remotes/foo/baz master && - commit master4 + commit master4 && + git update-ref refs/remotes/upstream/one subspace/one && + git update-ref refs/remotes/upstream/two subspace/two && + git update-ref refs/remotes/upstream/x subspace-x && + git tag qux/one subspace/one && + git tag qux/two subspace/two && + git tag qux/x subspace-x ' test_expect_success 'rev-parse --glob=refs/heads/subspace/*' ' @@ -141,6 +147,66 @@ test_expect_success 'rev-parse accumulates multiple --exclude' ' compare rev-parse "--exclude=refs/remotes/* --exclude=refs/tags/* --all" --branches ' +test_expect_success 'rev-parse --branches clears --exclude' ' + compare rev-parse "--exclude=* --branches --branches" "--branches" +' + +test_expect_success 'rev-parse --tags clears --exclude' ' + compare rev-parse "--exclude=* --tags --tags" "--tags" +' + +test_expect_success 'rev-parse --all clears --exclude' ' + compare rev-parse "--exclude=* --all --all" "--all" +' + +test_expect_success 'rev-parse --exclude=glob with --branches=glob' ' + compare rev-parse "--exclude=subspace-* --branches=sub*" "subspace/one subspace/two" +' + +test_expect_success 'rev-parse --exclude=glob with --tags=glob' ' + compare rev-parse "--exclude=qux/? --tags=qux/*" "qux/one qux/two" +' + +test_expect_success 'rev-parse --exclude=glob with --remotes=glob' ' + compare rev-parse "--exclude=upstream/? --remotes=upstream/*" "upstream/one upstream/two" +' + +test_expect_success 'rev-parse --exclude=ref with --branches=glob' ' + compare rev-parse "--exclude=subspace-x --branches=sub*" "subspace/one subspace/two" +' + +test_expect_success 'rev-parse --exclude=ref with --tags=glob' ' + compare rev-parse "--exclude=qux/x --tags=qux/*" "qux/one qux/two" +' + +test_expect_success 'rev-parse --exclude=ref with --remotes=glob' ' + compare rev-parse "--exclude=upstream/x --remotes=upstream/*" "upstream/one upstream/two" +' + +test_expect_success 'rev-list --exclude=glob with --branches=glob' ' + compare rev-list "--exclude=subspace-* --branches=sub*" "subspace/one subspace/two" +' + +test_expect_success 'rev-list --exclude=glob with --tags=glob' ' + compare rev-list "--exclude=qux/? --tags=qux/*" "qux/one qux/two" +' + +test_expect_success 'rev-list --exclude=glob with --remotes=glob' ' + compare rev-list "--exclude=upstream/? --remotes=upstream/*" "upstream/one upstream/two" +' + +test_expect_success 'rev-list --exclude=ref with --branches=glob' ' + compare rev-list "--exclude=subspace-x --branches=sub*" "subspace/one subspace/two" +' + +test_expect_success 'rev-list --exclude=ref with --tags=glob' ' + compare rev-list "--exclude=qux/x --tags=qux/*" "qux/one qux/two" +' + +test_expect_success 'rev-list --exclude=ref with --remotes=glob' ' + compare rev-list "--exclude=upstream/x --remotes=upstream/*" "upstream/one upstream/two" +' + test_expect_success 'rev-list --glob=refs/heads/subspace/*' ' compare rev-list "subspace/one subspace/two" "--glob=refs/heads/subspace/*" @@ -233,7 +299,7 @@ test_expect_success 'rev-list --tags=foo' ' test_expect_success 'rev-list --tags' ' - compare rev-list "foo/bar" "--tags" + compare rev-list "foo/bar qux/x qux/two qux/one" "--tags" ' @@ -292,7 +358,7 @@ test_expect_success 'shortlog accepts --glob/--tags/--remotes' ' "master other/three someref subspace-x subspace/one subspace/two" \ "--glob=heads/*" && compare shortlog foo/bar --tags=foo && - compare shortlog foo/bar --tags && + compare shortlog "foo/bar qux/one qux/two qux/x" --tags && compare shortlog foo/baz --remotes=foo ' diff --git a/t/t6132-pathspec-exclude.sh b/t/t6132-pathspec-exclude.sh index eb829fce97..2462b19ddd 100755 --- a/t/t6132-pathspec-exclude.sh +++ b/t/t6132-pathspec-exclude.sh @@ -194,4 +194,21 @@ test_expect_success 'multiple exclusions' ' test_cmp expect actual ' +test_expect_success 't_e_i() exclude case #8' ' + git init case8 && + ( + cd case8 && + echo file >file1 && + echo file >file2 && + git add file1 file2 && + git commit -m twofiles && + git grep -l file HEAD :^file2 >actual && + echo HEAD:file1 >expected && + test_cmp expected actual && + git grep -l file HEAD :^file1 >actual && + echo HEAD:file2 >expected && + test_cmp expected actual + ) +' + test_done diff --git a/t/t6600-test-reach.sh b/t/t6600-test-reach.sh index ae94b27f70..b24d850036 100755 --- a/t/t6600-test-reach.sh +++ b/t/t6600-test-reach.sh @@ -56,18 +56,22 @@ test_expect_success 'setup' ' git config core.commitGraph true ' -test_three_modes () { +run_three_modes () { test_when_finished rm -rf .git/objects/info/commit-graph && - test-tool reach $1 <input >actual && + "$@" <input >actual && test_cmp expect actual && cp commit-graph-full .git/objects/info/commit-graph && - test-tool reach $1 <input >actual && + "$@" <input >actual && test_cmp expect actual && cp commit-graph-half .git/objects/info/commit-graph && - test-tool reach $1 <input >actual && + "$@" <input >actual && test_cmp expect actual } +test_three_modes () { + run_three_modes test-tool reach "$@" +} + test_expect_success 'ref_newer:miss' ' cat >input <<-\EOF && A:commit-5-7 @@ -265,4 +269,140 @@ test_expect_success 'commit_contains:miss' ' test_three_modes commit_contains --tag ' +test_expect_success 'rev-list: basic topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 commit-3-6 commit-2-6 commit-1-6 \ + commit-6-5 commit-5-5 commit-4-5 commit-3-5 commit-2-5 commit-1-5 \ + commit-6-4 commit-5-4 commit-4-4 commit-3-4 commit-2-4 commit-1-4 \ + commit-6-3 commit-5-3 commit-4-3 commit-3-3 commit-2-3 commit-1-3 \ + commit-6-2 commit-5-2 commit-4-2 commit-3-2 commit-2-2 commit-1-2 \ + commit-6-1 commit-5-1 commit-4-1 commit-3-1 commit-2-1 commit-1-1 \ + >expect && + run_three_modes git rev-list --topo-order commit-6-6 +' + +test_expect_success 'rev-list: first-parent topo-order' ' + git rev-parse \ + commit-6-6 \ + commit-6-5 \ + commit-6-4 \ + commit-6-3 \ + commit-6-2 \ + commit-6-1 commit-5-1 commit-4-1 commit-3-1 commit-2-1 commit-1-1 \ + >expect && + run_three_modes git rev-list --first-parent --topo-order commit-6-6 +' + +test_expect_success 'rev-list: range topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 commit-3-6 commit-2-6 commit-1-6 \ + commit-6-5 commit-5-5 commit-4-5 commit-3-5 commit-2-5 commit-1-5 \ + commit-6-4 commit-5-4 commit-4-4 commit-3-4 commit-2-4 commit-1-4 \ + commit-6-3 commit-5-3 commit-4-3 \ + commit-6-2 commit-5-2 commit-4-2 \ + commit-6-1 commit-5-1 commit-4-1 \ + >expect && + run_three_modes git rev-list --topo-order commit-3-3..commit-6-6 +' + +test_expect_success 'rev-list: range topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 \ + commit-6-5 commit-5-5 commit-4-5 \ + commit-6-4 commit-5-4 commit-4-4 \ + commit-6-3 commit-5-3 commit-4-3 \ + commit-6-2 commit-5-2 commit-4-2 \ + commit-6-1 commit-5-1 commit-4-1 \ + >expect && + run_three_modes git rev-list --topo-order commit-3-8..commit-6-6 +' + +test_expect_success 'rev-list: first-parent range topo-order' ' + git rev-parse \ + commit-6-6 \ + commit-6-5 \ + commit-6-4 \ + commit-6-3 \ + commit-6-2 \ + commit-6-1 commit-5-1 commit-4-1 \ + >expect && + run_three_modes git rev-list --first-parent --topo-order commit-3-8..commit-6-6 +' + +test_expect_success 'rev-list: ancestry-path topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 commit-3-6 \ + commit-6-5 commit-5-5 commit-4-5 commit-3-5 \ + commit-6-4 commit-5-4 commit-4-4 commit-3-4 \ + commit-6-3 commit-5-3 commit-4-3 \ + >expect && + run_three_modes git rev-list --topo-order --ancestry-path commit-3-3..commit-6-6 +' + +test_expect_success 'rev-list: symmetric difference topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 \ + commit-6-5 commit-5-5 commit-4-5 \ + commit-6-4 commit-5-4 commit-4-4 \ + commit-6-3 commit-5-3 commit-4-3 \ + commit-6-2 commit-5-2 commit-4-2 \ + commit-6-1 commit-5-1 commit-4-1 \ + commit-3-8 commit-2-8 commit-1-8 \ + commit-3-7 commit-2-7 commit-1-7 \ + >expect && + run_three_modes git rev-list --topo-order commit-3-8...commit-6-6 +' + +test_expect_success 'get_reachable_subset:all' ' + cat >input <<-\EOF && + X:commit-9-1 + X:commit-8-3 + X:commit-7-5 + X:commit-6-6 + X:commit-1-7 + Y:commit-3-3 + Y:commit-1-7 + Y:commit-5-6 + EOF + ( + echo "get_reachable_subset(X,Y)" && + git rev-parse commit-3-3 \ + commit-1-7 \ + commit-5-6 | sort + ) >expect && + test_three_modes get_reachable_subset +' + +test_expect_success 'get_reachable_subset:some' ' + cat >input <<-\EOF && + X:commit-9-1 + X:commit-8-3 + X:commit-7-5 + X:commit-1-7 + Y:commit-3-3 + Y:commit-1-7 + Y:commit-5-6 + EOF + ( + echo "get_reachable_subset(X,Y)" && + git rev-parse commit-3-3 \ + commit-1-7 | sort + ) >expect && + test_three_modes get_reachable_subset +' + +test_expect_success 'get_reachable_subset:none' ' + cat >input <<-\EOF && + X:commit-9-1 + X:commit-8-3 + X:commit-7-5 + X:commit-1-7 + Y:commit-9-3 + Y:commit-7-6 + Y:commit-2-8 + EOF + echo "get_reachable_subset(X,Y)" >expect && + test_three_modes get_reachable_subset +' + test_done diff --git a/t/t7411-submodule-config.sh b/t/t7411-submodule-config.sh index 0bde5850ac..89690b7adb 100755 --- a/t/t7411-submodule-config.sh +++ b/t/t7411-submodule-config.sh @@ -82,29 +82,23 @@ Submodule name: 'a' for path 'b' Submodule name: 'submodule' for path 'submodule' EOF -test_expect_success 'error in one submodule config lets continue' ' +test_expect_success 'error in history of one submodule config lets continue, stderr message contains blob ref' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && (cd super && cp .gitmodules .gitmodules.bak && echo " value = \"" >>.gitmodules && git add .gitmodules && mv .gitmodules.bak .gitmodules && git commit -m "add error" && - test-tool submodule-config \ - HEAD b \ - HEAD submodule \ - >actual && - test_cmp expect_error actual - ) -' - -test_expect_success 'error message contains blob reference' ' - (cd super && sha1=$(git rev-parse HEAD) && test-tool submodule-config \ HEAD b \ HEAD submodule \ - 2>actual_err && - test_i18ngrep "submodule-blob $sha1:.gitmodules" actual_err >/dev/null + >actual \ + 2>actual_stderr && + test_cmp expect_error actual && + test_i18ngrep "submodule-blob $sha1:.gitmodules" actual_stderr >/dev/null ) ' @@ -123,6 +117,8 @@ test_expect_success 'using different treeishs works' ' ' test_expect_success 'error in history in fetchrecursesubmodule lets continue' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && (cd super && git config -f .gitmodules \ submodule.submodule.fetchrecursesubmodules blabla && @@ -134,8 +130,123 @@ test_expect_success 'error in history in fetchrecursesubmodule lets continue' ' HEAD b \ HEAD submodule \ >actual && - test_cmp expect_error actual && - git reset --hard HEAD^ + test_cmp expect_error actual + ) +' + +test_expect_success 'reading submodules config from the working tree with "submodule--helper config"' ' + (cd super && + echo "../submodule" >expect && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'writing submodules config with "submodule--helper config"' ' + (cd super && + echo "new_url" >expect && + git submodule--helper config submodule.submodule.url "new_url" && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'overwriting unstaged submodules config with "submodule--helper config"' ' + test_when_finished "git -C super checkout .gitmodules" && + (cd super && + echo "newer_url" >expect && + git submodule--helper config submodule.submodule.url "newer_url" && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'writeable .gitmodules when it is in the working tree' ' + git -C super submodule--helper config --check-writeable +' + +test_expect_success 'writeable .gitmodules when it is nowhere in the repository' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && + (cd super && + git rm .gitmodules && + git commit -m "remove .gitmodules from the current branch" && + git submodule--helper config --check-writeable + ) +' + +test_expect_success 'non-writeable .gitmodules when it is in the index but not in the working tree' ' + test_when_finished "git -C super checkout .gitmodules" && + (cd super && + rm -f .gitmodules && + test_must_fail git submodule--helper config --check-writeable + ) +' + +test_expect_success 'non-writeable .gitmodules when it is in the current branch but not in the index' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && + (cd super && + git rm .gitmodules && + test_must_fail git submodule--helper config --check-writeable + ) +' + +test_expect_success 'reading submodules config from the index when .gitmodules is not in the working tree' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && + (cd super && + git submodule--helper config submodule.submodule.url "staged_url" && + git add .gitmodules && + rm -f .gitmodules && + echo "staged_url" >expect && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'reading submodules config from the current branch when .gitmodules is not in the index' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && + (cd super && + git rm .gitmodules && + echo "../submodule" >expect && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'reading nested submodules config' ' + (cd super && + git init submodule/nested_submodule && + echo "a" >submodule/nested_submodule/a && + git -C submodule/nested_submodule add a && + git -C submodule/nested_submodule commit -m "add a" && + git -C submodule submodule add ./nested_submodule && + git -C submodule add nested_submodule && + git -C submodule commit -m "added nested_submodule" && + git add submodule && + git commit -m "updated submodule" && + echo "./nested_submodule" >expect && + test-tool submodule-nested-repo-config \ + submodule submodule.nested_submodule.url >actual && + test_cmp expect actual + ) +' + +# When this test eventually passes, before turning it into +# test_expect_success, remember to replace the test_i18ngrep below with +# a "test_must_be_empty warning" to be sure that the warning is actually +# removed from the code. +test_expect_failure 'reading nested submodules config when .gitmodules is not in the working tree' ' + test_when_finished "git -C super/submodule checkout .gitmodules" && + (cd super && + echo "./nested_submodule" >expect && + rm submodule/.gitmodules && + test-tool submodule-nested-repo-config \ + submodule submodule.nested_submodule.url >actual 2>warning && + test_i18ngrep "nested submodules without %s in the working tree are not supported yet" warning && + test_cmp expect actual ) ' diff --git a/t/t7418-submodule-sparse-gitmodules.sh b/t/t7418-submodule-sparse-gitmodules.sh new file mode 100755 index 0000000000..3f7f271883 --- /dev/null +++ b/t/t7418-submodule-sparse-gitmodules.sh @@ -0,0 +1,122 @@ +#!/bin/sh +# +# Copyright (C) 2018 Antonio Ospite <ao2@ao2.it> +# + +test_description='Test reading/writing .gitmodules when not in the working tree + +This test verifies that, when .gitmodules is in the current branch but is not +in the working tree reading from it still works but writing to it does not. + +The test setup uses a sparse checkout, however the same scenario can be set up +also by committing .gitmodules and then just removing it from the filesystem. +' + +. ./test-lib.sh + +test_expect_success 'sparse checkout setup which hides .gitmodules' ' + git init upstream && + git init submodule && + (cd submodule && + echo file >file && + git add file && + test_tick && + git commit -m "Add file" + ) && + (cd upstream && + git submodule add ../submodule && + test_tick && + git commit -m "Add submodule" + ) && + git clone upstream super && + (cd super && + cat >.git/info/sparse-checkout <<-\EOF && + /* + !/.gitmodules + EOF + git config core.sparsecheckout true && + git read-tree -m -u HEAD && + test_path_is_missing .gitmodules + ) +' + +test_expect_success 'reading gitmodules config file when it is not checked out' ' + echo "../submodule" >expect && + git -C super submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual +' + +test_expect_success 'not writing gitmodules config file when it is not checked out' ' + test_must_fail git -C super submodule--helper config submodule.submodule.url newurl && + test_path_is_missing super/.gitmodules +' + +test_expect_success 'initialising submodule when the gitmodules config is not checked out' ' + test_must_fail git -C super config submodule.submodule.url && + git -C super submodule init && + git -C super config submodule.submodule.url >actual && + echo "$(pwd)/submodule" >expect && + test_cmp expect actual +' + +test_expect_success 'updating submodule when the gitmodules config is not checked out' ' + test_path_is_missing super/submodule/file && + git -C super submodule update && + test_cmp submodule/file super/submodule/file +' + +ORIG_SUBMODULE=$(git -C submodule rev-parse HEAD) +ORIG_UPSTREAM=$(git -C upstream rev-parse HEAD) +ORIG_SUPER=$(git -C super rev-parse HEAD) + +test_expect_success 're-updating submodule when the gitmodules config is not checked out' ' + test_when_finished "git -C submodule reset --hard $ORIG_SUBMODULE; + git -C upstream reset --hard $ORIG_UPSTREAM; + git -C super reset --hard $ORIG_SUPER; + git -C upstream submodule update --remote; + git -C super pull; + git -C super submodule update --remote" && + (cd submodule && + echo file2 >file2 && + git add file2 && + test_tick && + git commit -m "Add file2 to submodule" + ) && + (cd upstream && + git submodule update --remote && + git add submodule && + test_tick && + git commit -m "Update submodule" + ) && + git -C super pull && + # The --for-status options reads the gitmodules config + git -C super submodule summary --for-status >actual && + rev1=$(git -C submodule rev-parse --short HEAD) && + rev2=$(git -C submodule rev-parse --short HEAD^) && + cat >expect <<-EOF && + * submodule ${rev1}...${rev2} (1): + < Add file2 to submodule + + EOF + test_cmp expect actual && + # Test that the update actually succeeds + test_path_is_missing super/submodule/file2 && + git -C super submodule update && + test_cmp submodule/file2 super/submodule/file2 && + git -C super status --short >output && + test_must_be_empty output +' + +test_expect_success 'not adding submodules when the gitmodules config is not checked out' ' + git clone submodule new_submodule && + test_must_fail git -C super submodule add ../new_submodule && + test_path_is_missing .gitmodules +' + +# This test checks that the previous "git submodule add" did not leave the +# repository in a spurious state when it failed. +test_expect_success 'init submodule still works even after the previous add failed' ' + git -C super submodule init +' + +test_done diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index 1f43b3cd4c..ebfcad9c4c 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -253,7 +253,7 @@ test_rebase () { } test_rebase success -i -test_rebase success -p +test_have_prereq !REBASE_P || test_rebase success -p test_expect_success 'with hook (cherry-pick)' ' test_when_finished "git checkout -f master" && diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index 943708fb04..08629a6e70 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -325,7 +325,8 @@ test_expect_success 'setup superproject with untracked file in nested submodule' ( cd super && git clean -dfx && - rm .gitmodules && + git rm .gitmodules && + git commit -m "remove .gitmodules" && git submodule add -f ./sub1 && git submodule add -f ./sub2 && git submodule add -f ./sub1 sub3 && diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 19ccae2869..86d3f93fa2 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -176,8 +176,9 @@ test_expect_success GPG 'show good signature with custom format' ' 13B6F51ECDDE430D C O Mitter <committer@example.com> 73D758744BE721698EC54E8713B6F51ECDDE430D + 73D758744BE721698EC54E8713B6F51ECDDE430D EOF - git log -1 --format="%G?%n%GK%n%GS%n%GF" sixth-signed >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" sixth-signed >actual && test_cmp expect actual ' @@ -187,30 +188,33 @@ test_expect_success GPG 'show bad signature with custom format' ' 13B6F51ECDDE430D C O Mitter <committer@example.com> + EOF - git log -1 --format="%G?%n%GK%n%GS%n%GF" $(cat forged1.commit) >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" $(cat forged1.commit) >actual && test_cmp expect actual ' test_expect_success GPG 'show untrusted signature with custom format' ' cat >expect <<-\EOF && U - 61092E85B7227189 + 65A0EEA02E30CAD7 Eris Discordia <discord@example.net> + F8364A59E07FFE9F4D63005A65A0EEA02E30CAD7 D4BE22311AD3131E5EDA29A461092E85B7227189 EOF - git log -1 --format="%G?%n%GK%n%GS%n%GF" eighth-signed-alt >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" eighth-signed-alt >actual && test_cmp expect actual ' test_expect_success GPG 'show unknown signature with custom format' ' cat >expect <<-\EOF && E - 61092E85B7227189 + 65A0EEA02E30CAD7 + EOF - GNUPGHOME="$GNUPGHOME_NOT_USED" git log -1 --format="%G?%n%GK%n%GS%n%GF" eighth-signed-alt >actual && + GNUPGHOME="$GNUPGHOME_NOT_USED" git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" eighth-signed-alt >actual && test_cmp expect actual ' @@ -220,8 +224,9 @@ test_expect_success GPG 'show lack of signature with custom format' ' + EOF - git log -1 --format="%G?%n%GK%n%GS%n%GF" seventh-unsigned >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" seventh-unsigned >actual && test_cmp expect actual ' @@ -261,8 +266,9 @@ test_expect_success GPG 'show double signature with custom format' ' + EOF - git log -1 --format="%G?%n%GK%n%GS%n%GF" $(cat double-commit.commit) >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" $(cat double-commit.commit) >actual && test_cmp expect actual ' diff --git a/t/t7517-per-repo-email.sh b/t/t7517-per-repo-email.sh index 2a22fa7588..231b8cc19d 100755 --- a/t/t7517-per-repo-email.sh +++ b/t/t7517-per-repo-email.sh @@ -72,12 +72,14 @@ test_expect_success 'noop interactive rebase does not care about ident' ' git rebase -i HEAD^ ' -test_expect_success 'fast-forward rebase does not care about ident (preserve)' ' +test_expect_success REBASE_P \ + 'fast-forward rebase does not care about ident (preserve)' ' git checkout -B tmp side-without-commit && git rebase -p master ' -test_expect_success 'non-fast-forward rebase refuses to write commits (preserve)' ' +test_expect_success REBASE_P \ + 'non-fast-forward rebase refuses to write commits (preserve)' ' test_when_finished "git rebase --abort || true" && git checkout -B tmp side-with-commit && test_must_fail git rebase -p master diff --git a/t/t7612-merge-verify-signatures.sh b/t/t7612-merge-verify-signatures.sh index e2b1df817a..d99218a725 100755 --- a/t/t7612-merge-verify-signatures.sh +++ b/t/t7612-merge-verify-signatures.sh @@ -103,4 +103,11 @@ test_expect_success GPG 'merge commit with bad signature with merge.verifySignat git merge --no-verify-signatures $(cat forged.commit) ' +test_expect_success GPG 'merge unsigned commit into unborn branch' ' + test_when_finished "git checkout initial" && + git checkout --orphan unborn && + test_must_fail git merge --verify-signatures side-unsigned 2>mergeerror && + test_i18ngrep "does not have a GPG signature" mergeerror +' + test_done diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 562bd215a5..22b9199d59 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -332,7 +332,7 @@ test_expect_success 'difftool --extcmd cat arg1' ' test_expect_success 'difftool --extcmd cat arg2' ' echo branch >expect && git difftool --no-prompt \ - --extcmd sh\ -c\ \"cat\ \$2\" branch >actual && + --extcmd sh\ -c\ \"cat\ \\\"\$2\\\"\" branch >actual && test_cmp expect actual ' diff --git a/t/t7814-grep-recurse-submodules.sh b/t/t7814-grep-recurse-submodules.sh index 7184113b9b..fa475d52fa 100755 --- a/t/t7814-grep-recurse-submodules.sh +++ b/t/t7814-grep-recurse-submodules.sh @@ -380,4 +380,20 @@ test_expect_success 'grep --recurse-submodules should pass the pattern type alon fi ' +# Recursing down into nested submodules which do not have .gitmodules in their +# working tree does not work yet. This is because config_from_gitmodules() +# uses get_oid() and the latter is still not able to get objects from an +# arbitrary repository (the nested submodule, in this case). +test_expect_failure 'grep --recurse-submodules with submodules without .gitmodules in the working tree' ' + test_when_finished "git -C submodule checkout .gitmodules" && + rm submodule/.gitmodules && + git grep --recurse-submodules -e "(.|.)[\d]" >actual && + cat >expect <<-\EOF && + a:(1|2)d(3|4) + submodule/a:(1|2)d(3|4) + submodule/sub/a:(1|2)d(3|4) + EOF + test_cmp expect actual +' + test_done diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 1ef1a19003..ee1efcc59d 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -492,6 +492,21 @@ do --validate \ $patches longline.patch ' + +done + +for enc in 7bit 8bit quoted-printable base64 +do + test_expect_success $PREREQ "--transfer-encoding=$enc produces correct header" ' + clean_fake_sendmail && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --transfer-encoding=$enc \ + $patches && + grep "Content-Transfer-Encoding: $enc" msgtxt1 + ' done test_expect_success $PREREQ 'Invalid In-Reply-To' ' diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 40fe7e4976..59a13b6a77 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -1558,7 +1558,7 @@ test_expect_success 'O: blank lines not necessary after other commands' ' INPUT_END git fast-import <input && - test 8 = $(find .git/objects/pack -type f | wc -l) && + test 8 = $(find .git/objects/pack -type f | grep -v multi-pack-index | wc -l) && test $(git rev-parse refs/tags/O3-2nd) = $(git rev-parse O3^) && git log --reverse --pretty=oneline O3 | sed s/^.*z// >actual && test_cmp expect actual diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 78d8c3783b..d158c8d0bf 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -747,6 +747,29 @@ test_cmp() { $GIT_TEST_CMP "$@" } +# Check that the given config key has the expected value. +# +# test_cmp_config [-C <dir>] <expected-value> +# [<git-config-options>...] <config-key> +# +# for example to check that the value of core.bar is foo +# +# test_cmp_config foo core.bar +# +test_cmp_config() { + local GD && + if test "$1" = "-C" + then + shift && + GD="-C $1" && + shift + fi && + printf "%s\n" "$1" >expect.config && + shift && + git $GD config "$@" >actual.config && + test_cmp expect.config actual.config +} + # test_cmp_bin - helper to compare binary files test_cmp_bin() { diff --git a/t/test-lib.sh b/t/test-lib.sh index 47a99aa0ed..aba66cafa2 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -1268,3 +1268,7 @@ test_lazy_prereq CURL ' test_lazy_prereq SHA1 ' test $(git hash-object /dev/null) = e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 ' + +test_lazy_prereq REBASE_P ' + test -z "$GIT_TEST_SKIP_REBASE_P" +' diff --git a/thread-utils.c b/thread-utils.c index a2135e0743..5329845691 100644 --- a/thread-utils.c +++ b/thread-utils.c @@ -20,6 +20,9 @@ int online_cpus(void) { +#ifdef NO_PTHREADS + return 1; +#else #ifdef _SC_NPROCESSORS_ONLN long ncpus; #endif @@ -59,10 +62,12 @@ int online_cpus(void) #endif return 1; +#endif } int init_recursive_mutex(pthread_mutex_t *m) { +#ifndef NO_PTHREADS pthread_mutexattr_t a; int ret; @@ -74,4 +79,47 @@ int init_recursive_mutex(pthread_mutex_t *m) pthread_mutexattr_destroy(&a); } return ret; +#else + return 0; +#endif +} + +#ifdef NO_PTHREADS +int dummy_pthread_create(pthread_t *pthread, const void *attr, + void *(*fn)(void *), void *data) +{ + /* + * Do nothing. + * + * The main purpose of this function is to break compiler's + * flow analysis and avoid -Wunused-variable false warnings. + */ + return ENOSYS; +} + +int dummy_pthread_init(void *data) +{ + /* + * Do nothing. + * + * The main purpose of this function is to break compiler's + * flow analysis or it may realize that functions like + * pthread_mutex_init() is no-op, which means the (static) + * variable is not used/initialized at all and trigger + * -Wunused-variable + */ + return ENOSYS; } + +int dummy_pthread_join(pthread_t pthread, void **retval) +{ + /* + * Do nothing. + * + * The main purpose of this function is to break compiler's + * flow analysis and avoid -Wunused-variable false warnings. + */ + return ENOSYS; +} + +#endif diff --git a/thread-utils.h b/thread-utils.h index d9a769d190..4961487ed9 100644 --- a/thread-utils.h +++ b/thread-utils.h @@ -4,12 +4,54 @@ #ifndef NO_PTHREADS #include <pthread.h> -extern int online_cpus(void); -extern int init_recursive_mutex(pthread_mutex_t*); +#define HAVE_THREADS 1 #else -#define online_cpus() 1 +#define HAVE_THREADS 0 + +/* + * macros instead of typedefs because pthread definitions may have + * been pulled in by some system dependencies even though the user + * wants to disable pthread. + */ +#define pthread_t int +#define pthread_mutex_t int +#define pthread_cond_t int +#define pthread_key_t int + +#define pthread_mutex_init(mutex, attr) dummy_pthread_init(mutex) +#define pthread_mutex_lock(mutex) +#define pthread_mutex_unlock(mutex) +#define pthread_mutex_destroy(mutex) + +#define pthread_cond_init(cond, attr) dummy_pthread_init(cond) +#define pthread_cond_wait(cond, mutex) +#define pthread_cond_signal(cond) +#define pthread_cond_broadcast(cond) +#define pthread_cond_destroy(cond) + +#define pthread_key_create(key, attr) dummy_pthread_init(key) +#define pthread_key_delete(key) + +#define pthread_create(thread, attr, fn, data) \ + dummy_pthread_create(thread, attr, fn, data) +#define pthread_join(thread, retval) \ + dummy_pthread_join(thread, retval) + +#define pthread_setspecific(key, data) +#define pthread_getspecific(key) NULL + +int dummy_pthread_create(pthread_t *pthread, const void *attr, + void *(*fn)(void *), void *data); +int dummy_pthread_join(pthread_t pthread, void **retval); + +int dummy_pthread_init(void *); #endif + +int online_cpus(void); +int init_recursive_mutex(pthread_mutex_t*); + + #endif /* THREAD_COMPAT_H */ diff --git a/tree-walk.c b/tree-walk.c index 77b37f36fa..79bafbd1a2 100644 --- a/tree-walk.c +++ b/tree-walk.c @@ -1107,7 +1107,7 @@ enum interesting tree_entry_interesting(const struct name_entry *entry, * 5 | file | 1 | 1 | 0 * 6 | file | 1 | 2 | 0 * 7 | file | 2 | -1 | 2 - * 8 | file | 2 | 0 | 2 + * 8 | file | 2 | 0 | 1 * 9 | file | 2 | 1 | 0 * 10 | file | 2 | 2 | -1 * -----+-------+----------+----------+------- @@ -1118,7 +1118,7 @@ enum interesting tree_entry_interesting(const struct name_entry *entry, * 15 | dir | 1 | 1 | 1 (*) * 16 | dir | 1 | 2 | 0 * 17 | dir | 2 | -1 | 2 - * 18 | dir | 2 | 0 | 2 + * 18 | dir | 2 | 0 | 1 * 19 | dir | 2 | 1 | 1 (*) * 20 | dir | 2 | 2 | -1 * @@ -1134,7 +1134,12 @@ enum interesting tree_entry_interesting(const struct name_entry *entry, negative = do_match(entry, base, base_offset, ps, 1); - /* #3, #4, #7, #8, #13, #14, #17, #18 */ + /* #8, #18 */ + if (positive == all_entries_interesting && + negative == entry_not_interesting) + return entry_interesting; + + /* #3, #4, #7, #13, #14, #17 */ if (negative <= entry_not_interesting) return positive; diff --git a/wildmatch.c b/wildmatch.c index d074c1be10..9e9e2a2f95 100644 --- a/wildmatch.c +++ b/wildmatch.c @@ -104,8 +104,8 @@ static int dowild(const uchar *p, const uchar *text, unsigned int flags) dowild(p + 1, text, flags) == WM_MATCH) return WM_MATCH; match_slash = 1; - } else - return WM_ABORT_MALFORMED; + } else /* WM_PATHNAME is set */ + match_slash = 0; } else /* without WM_PATHNAME, '*' == '**' */ match_slash = flags & WM_PATHNAME ? 0 : 1; diff --git a/wildmatch.h b/wildmatch.h index b8c826aa68..5993696298 100644 --- a/wildmatch.h +++ b/wildmatch.h @@ -4,7 +4,6 @@ #define WM_CASEFOLD 1 #define WM_PATHNAME 2 -#define WM_ABORT_MALFORMED 2 #define WM_NOMATCH 1 #define WM_MATCH 0 #define WM_ABORT_ALL -1 diff --git a/worktree.c b/worktree.c index b0d0b5426d..d6a0ee7f73 100644 --- a/worktree.c +++ b/worktree.c @@ -235,7 +235,7 @@ int is_main_worktree(const struct worktree *wt) return !wt->id; } -const char *is_worktree_locked(struct worktree *wt) +const char *worktree_lock_reason(struct worktree *wt) { assert(!is_main_worktree(wt)); @@ -487,6 +487,75 @@ int submodule_uses_worktrees(const char *path) return ret; } +int parse_worktree_ref(const char *worktree_ref, const char **name, + int *name_length, const char **ref) +{ + if (skip_prefix(worktree_ref, "main-worktree/", &worktree_ref)) { + if (!*worktree_ref) + return -1; + if (name) + *name = NULL; + if (name_length) + *name_length = 0; + if (ref) + *ref = worktree_ref; + return 0; + } + if (skip_prefix(worktree_ref, "worktrees/", &worktree_ref)) { + const char *slash = strchr(worktree_ref, '/'); + + if (!slash || slash == worktree_ref || !slash[1]) + return -1; + if (name) + *name = worktree_ref; + if (name_length) + *name_length = slash - worktree_ref; + if (ref) + *ref = slash + 1; + return 0; + } + return -1; +} + +void strbuf_worktree_ref(const struct worktree *wt, + struct strbuf *sb, + const char *refname) +{ + switch (ref_type(refname)) { + case REF_TYPE_PSEUDOREF: + case REF_TYPE_PER_WORKTREE: + if (wt && !wt->is_current) { + if (is_main_worktree(wt)) + strbuf_addstr(sb, "main-worktree/"); + else + strbuf_addf(sb, "worktrees/%s/", wt->id); + } + break; + + case REF_TYPE_MAIN_PSEUDOREF: + case REF_TYPE_OTHER_PSEUDOREF: + break; + + case REF_TYPE_NORMAL: + /* + * For shared refs, don't prefix worktrees/ or + * main-worktree/. It's not necessary and + * files-backend.c can't handle it anyway. + */ + break; + } + strbuf_addstr(sb, refname); +} + +const char *worktree_ref(const struct worktree *wt, const char *refname) +{ + static struct strbuf sb = STRBUF_INIT; + + strbuf_reset(&sb); + strbuf_worktree_ref(wt, &sb, refname); + return sb.buf; +} + int other_head_refs(each_ref_fn fn, void *cb_data) { struct worktree **worktrees, **p; @@ -495,13 +564,17 @@ int other_head_refs(each_ref_fn fn, void *cb_data) worktrees = get_worktrees(0); for (p = worktrees; *p; p++) { struct worktree *wt = *p; - struct ref_store *refs; + struct object_id oid; + int flag; if (wt->is_current) continue; - refs = get_worktree_ref_store(wt); - ret = refs_head_ref(refs, fn, cb_data); + if (!refs_read_ref_full(get_main_ref_store(the_repository), + worktree_ref(wt, "HEAD"), + RESOLVE_REF_READING, + &oid, &flag)) + ret = fn(worktree_ref(wt, "HEAD"), &oid, flag, cb_data); if (ret) break; } diff --git a/worktree.h b/worktree.h index df3fc30f73..9e3b0b7b6f 100644 --- a/worktree.h +++ b/worktree.h @@ -10,12 +10,12 @@ struct worktree { char *path; char *id; char *head_ref; /* NULL if HEAD is broken or detached */ - char *lock_reason; /* internal use */ + char *lock_reason; /* private - use worktree_lock_reason */ struct object_id head_oid; int is_detached; int is_bare; int is_current; - int lock_reason_valid; + int lock_reason_valid; /* private */ }; /* Functions for acting on the information about worktrees. */ @@ -60,7 +60,7 @@ extern int is_main_worktree(const struct worktree *wt); * Return the reason string if the given worktree is locked or NULL * otherwise. */ -extern const char *is_worktree_locked(struct worktree *wt); +extern const char *worktree_lock_reason(struct worktree *wt); #define WT_VALIDATE_WORKTREE_MISSING_OK (1 << 0) @@ -108,4 +108,28 @@ extern const char *worktree_git_path(const struct worktree *wt, const char *fmt, ...) __attribute__((format (printf, 2, 3))); +/* + * Parse a worktree ref (i.e. with prefix main-worktree/ or + * worktrees/) and return the position of the worktree's name and + * length (or NULL and zero if it's main worktree), and ref. + * + * All name, name_length and ref arguments could be NULL. + */ +int parse_worktree_ref(const char *worktree_ref, const char **name, + int *name_length, const char **ref); + +/* + * Return a refname suitable for access from the current ref store. + */ +void strbuf_worktree_ref(const struct worktree *wt, + struct strbuf *sb, + const char *refname); + +/* + * Return a refname suitable for access from the current ref + * store. The result will be destroyed at the next call. + */ +const char *worktree_ref(const struct worktree *wt, + const char *refname); + #endif diff --git a/wt-status.c b/wt-status.c index 187568a112..a24711374c 100644 --- a/wt-status.c +++ b/wt-status.c @@ -1559,6 +1559,7 @@ void wt_status_get_state(struct wt_status_state *state, struct object_id oid; if (!stat(git_path_merge_head(the_repository), &st)) { + wt_status_check_rebase(NULL, state); state->merge_in_progress = 1; } else if (wt_status_check_rebase(NULL, state)) { ; /* all set */ @@ -1583,9 +1584,13 @@ static void wt_longstatus_print_state(struct wt_status *s) const char *state_color = color(WT_STATUS_HEADER, s); struct wt_status_state *state = &s->state; - if (state->merge_in_progress) + if (state->merge_in_progress) { + if (state->rebase_interactive_in_progress) { + show_rebase_information(s, state_color); + fputs("\n", s->fp); + } show_merge_in_progress(s, state_color); - else if (state->am_in_progress) + } else if (state->am_in_progress) show_am_in_progress(s, state_color); else if (state->rebase_in_progress || state->rebase_interactive_in_progress) show_rebase_in_progress(s, state_color); diff --git a/xdiff-interface.c b/xdiff-interface.c index e7af95db86..80f060d278 100644 --- a/xdiff-interface.c +++ b/xdiff-interface.c @@ -9,54 +9,26 @@ #include "xdiff/xutils.h" struct xdiff_emit_state { - xdiff_emit_consume_fn consume; + xdiff_emit_hunk_fn hunk_fn; + xdiff_emit_line_fn line_fn; void *consume_callback_data; struct strbuf remainder; }; -static int parse_num(char **cp_p, int *num_p) +static int xdiff_out_hunk(void *priv_, + long old_begin, long old_nr, + long new_begin, long new_nr, + const char *func, long funclen) { - char *cp = *cp_p; - int num = 0; + struct xdiff_emit_state *priv = priv_; - while ('0' <= *cp && *cp <= '9') - num = num * 10 + *cp++ - '0'; - if (!(cp - *cp_p)) - return -1; - *cp_p = cp; - *num_p = num; - return 0; -} + if (priv->remainder.len) + BUG("xdiff emitted hunk in the middle of a line"); -int parse_hunk_header(char *line, int len, - int *ob, int *on, - int *nb, int *nn) -{ - char *cp; - cp = line + 4; - if (parse_num(&cp, ob)) { - bad_line: - return error("malformed diff output: %s", line); - } - if (*cp == ',') { - cp++; - if (parse_num(&cp, on)) - goto bad_line; - } - else - *on = 1; - if (*cp++ != ' ' || *cp++ != '+') - goto bad_line; - if (parse_num(&cp, nb)) - goto bad_line; - if (*cp == ',') { - cp++; - if (parse_num(&cp, nn)) - goto bad_line; - } - else - *nn = 1; - return -!!memcmp(cp, " @@", 3); + priv->hunk_fn(priv->consume_callback_data, + old_begin, old_nr, new_begin, new_nr, + func, funclen); + return 0; } static void consume_one(void *priv_, char *s, unsigned long size) @@ -67,7 +39,7 @@ static void consume_one(void *priv_, char *s, unsigned long size) unsigned long this_size; ep = memchr(s, '\n', size); this_size = (ep == NULL) ? size : (ep - s + 1); - priv->consume(priv->consume_callback_data, s, this_size); + priv->line_fn(priv->consume_callback_data, s, this_size); size -= this_size; s += this_size; } @@ -78,6 +50,9 @@ static int xdiff_outf(void *priv_, mmbuffer_t *mb, int nbuf) struct xdiff_emit_state *priv = priv_; int i; + if (!priv->line_fn) + return 0; + for (i = 0; i < nbuf; i++) { if (mb[i].ptr[mb[i].size-1] != '\n') { /* Incomplete line */ @@ -140,8 +115,16 @@ int xdi_diff(mmfile_t *mf1, mmfile_t *mf2, xpparam_t const *xpp, xdemitconf_t co return xdl_diff(&a, &b, xpp, xecfg, xecb); } +void discard_hunk_line(void *priv, + long ob, long on, long nb, long nn, + const char *func, long funclen) +{ +} + int xdi_diff_outf(mmfile_t *mf1, mmfile_t *mf2, - xdiff_emit_consume_fn fn, void *consume_callback_data, + xdiff_emit_hunk_fn hunk_fn, + xdiff_emit_line_fn line_fn, + void *consume_callback_data, xpparam_t const *xpp, xdemitconf_t const *xecfg) { int ret; @@ -149,10 +132,13 @@ int xdi_diff_outf(mmfile_t *mf1, mmfile_t *mf2, xdemitcb_t ecb; memset(&state, 0, sizeof(state)); - state.consume = fn; + state.hunk_fn = hunk_fn; + state.line_fn = line_fn; state.consume_callback_data = consume_callback_data; memset(&ecb, 0, sizeof(ecb)); - ecb.outf = xdiff_outf; + if (hunk_fn) + ecb.out_hunk = xdiff_out_hunk; + ecb.out_line = xdiff_outf; ecb.priv = &state; strbuf_init(&state.remainder, 0); ret = xdi_diff(mf1, mf2, xpp, xecfg, &ecb); diff --git a/xdiff-interface.h b/xdiff-interface.h index 135fc05d72..2d41fffd4c 100644 --- a/xdiff-interface.h +++ b/xdiff-interface.h @@ -11,15 +11,18 @@ */ #define MAX_XDIFF_SIZE (1024UL * 1024 * 1023) -typedef void (*xdiff_emit_consume_fn)(void *, char *, unsigned long); +typedef void (*xdiff_emit_line_fn)(void *, char *, unsigned long); +typedef void (*xdiff_emit_hunk_fn)(void *data, + long old_begin, long old_nr, + long new_begin, long new_nr, + const char *func, long funclen); int xdi_diff(mmfile_t *mf1, mmfile_t *mf2, xpparam_t const *xpp, xdemitconf_t const *xecfg, xdemitcb_t *ecb); int xdi_diff_outf(mmfile_t *mf1, mmfile_t *mf2, - xdiff_emit_consume_fn fn, void *consume_callback_data, + xdiff_emit_hunk_fn hunk_fn, + xdiff_emit_line_fn line_fn, + void *consume_callback_data, xpparam_t const *xpp, xdemitconf_t const *xecfg); -int parse_hunk_header(char *line, int len, - int *ob, int *on, - int *nb, int *nn); int read_mmfile(mmfile_t *ptr, const char *filename); void read_mmblob(mmfile_t *ptr, const struct object_id *oid); int buffer_is_binary(const char *ptr, unsigned long size); @@ -30,6 +33,14 @@ extern int git_xmerge_config(const char *var, const char *value, void *cb); extern int git_xmerge_style; /* + * Can be used as a no-op hunk_fn for xdi_diff_outf(), since a NULL + * one just sends the hunk line to the line_fn callback). + */ +void discard_hunk_line(void *priv, + long ob, long on, long nb, long nn, + const char *func, long funclen); + +/* * Compare the strings l1 with l2 which are of size s1 and s2 respectively. * Returns 1 if the strings are deemed equal, 0 otherwise. * The `flags` given as XDF_WHITESPACE_FLAGS determine how white spaces diff --git a/xdiff/xdiff.h b/xdiff/xdiff.h index 2356da5f78..b158369020 100644 --- a/xdiff/xdiff.h +++ b/xdiff/xdiff.h @@ -86,7 +86,11 @@ typedef struct s_xpparam { typedef struct s_xdemitcb { void *priv; - int (*outf)(void *, mmbuffer_t *, int); + int (*out_hunk)(void *, + long old_begin, long old_nr, + long new_begin, long new_nr, + const char *func, long funclen); + int (*out_line)(void *, mmbuffer_t *, int); } xdemitcb_t; typedef long (*find_func_t)(const char *line, long line_len, char *buffer, long buffer_size, void *priv); diff --git a/xdiff/xutils.c b/xdiff/xutils.c index 88e5995535..963e1c58b9 100644 --- a/xdiff/xutils.c +++ b/xdiff/xutils.c @@ -54,7 +54,7 @@ int xdl_emit_diffrec(char const *rec, long size, char const *pre, long psize, mb[2].size = strlen(mb[2].ptr); i++; } - if (ecb->outf(ecb->priv, mb, i) < 0) { + if (ecb->out_line(ecb->priv, mb, i) < 0) { return -1; } @@ -344,8 +344,9 @@ int xdl_num_out(char *out, long val) { return str - out; } -int xdl_emit_hunk_hdr(long s1, long c1, long s2, long c2, - const char *func, long funclen, xdemitcb_t *ecb) { +static int xdl_format_hunk_hdr(long s1, long c1, long s2, long c2, + const char *func, long funclen, + xdemitcb_t *ecb) { int nb = 0; mmbuffer_t mb; char buf[128]; @@ -387,9 +388,21 @@ int xdl_emit_hunk_hdr(long s1, long c1, long s2, long c2, mb.ptr = buf; mb.size = nb; - if (ecb->outf(ecb->priv, &mb, 1) < 0) + if (ecb->out_line(ecb->priv, &mb, 1) < 0) return -1; + return 0; +} +int xdl_emit_hunk_hdr(long s1, long c1, long s2, long c2, + const char *func, long funclen, + xdemitcb_t *ecb) { + if (!ecb->out_hunk) + return xdl_format_hunk_hdr(s1, c1, s2, c2, func, funclen, ecb); + if (ecb->out_hunk(ecb->priv, + c1 ? s1 : s1 - 1, c1, + c2 ? s2 : s2 - 1, c2, + func, funclen) < 0) + return -1; return 0; } |