diff options
131 files changed, 2362 insertions, 615 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index c6f09f801a..2632c5149e 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -605,7 +605,7 @@ color.interactive.<slot>:: Use customized color for 'git-add --interactive' output. `<slot>` may be `prompt`, `header`, `help` or `error`, for four distinct types of normal output from interactive - programs. The values of these variables may be specified as + commands. The values of these variables may be specified as in color.branch.<slot>. color.pager:: @@ -1113,7 +1113,7 @@ instaweb.port:: linkgit:git-instaweb[1]. interactive.singlekey:: - In interactive programs, allow the user to provide one-letter + In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). Currently this is used only by the `\--patch` mode of linkgit:git-add[1]. Note that this setting is silently @@ -1218,12 +1218,20 @@ pack.compression:: pack.deltaCacheSize:: The maximum memory in bytes used for caching deltas in - linkgit:git-pack-objects[1]. - A value of 0 means no limit. Defaults to 0. + linkgit:git-pack-objects[1] before writing them out to a pack. + This cache is used to speed up the writing object phase by not + having to recompute the final delta result once the best match + for all objects is found. Repacking large repositories on machines + which are tight with memory might be badly impacted by this though, + especially if this cache pushes the system into swapping. + A value of 0 means no limit. The smallest size of 1 byte may be + used to virtually disable this cache. Defaults to 256 MiB. pack.deltaCacheLimit:: The maximum size of a delta, that is cached in - linkgit:git-pack-objects[1]. Defaults to 1000. + linkgit:git-pack-objects[1]. This cache is used to speed up the + writing object phase by not having to recompute the final delta + result once the best match for all objects is found. Defaults to 1000. pack.threads:: Specifies the number of threads to spawn when searching for best diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index d313795fdb..ea3b1bc19f 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -1,7 +1,7 @@ -q:: --quiet:: Pass --quiet to git-fetch-pack and silence any other internally - used programs. + used git commands. -v:: --verbose:: diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index ab1943c712..e67b7e875e 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -10,7 +10,7 @@ SYNOPSIS [verse] 'git add' [-n] [-v] [--force | -f] [--interactive | -i] [--patch | -p] [--edit | -e] [--all | [--update | -u]] [--intent-to-add | -N] - [--refresh] [--ignore-errors] [--] <filepattern>... + [--refresh] [--ignore-errors] [--] [<filepattern>...] DESCRIPTION ----------- diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index be894af39f..ae8938b2de 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -27,6 +27,9 @@ OPTIONS ------- -d:: Remove untracked directories in addition to untracked files. + If an untracked directory is managed by a different git + repository, it is not removed by default. Use -f option twice + if you really want to remove such a directory. -f:: If the git configuration specifies clean.requireForce as true, diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index b14de6c407..2c63a0fbae 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -72,8 +72,16 @@ These objects may be removed by normal git operations (such as 'git-commit') which automatically call `git gc --auto`. (See linkgit:git-gc[1].) If these objects are removed and were referenced by the cloned repository, then the cloned repository will become corrupt. - - ++ +Note that running `git repack` without the `-l` option in a repository +cloned with `-s` will copy objects from the source repository into a pack +in the cloned repository, removing the disk space savings of `clone -s`. +It is safe, however, to run `git gc`, which uses the `-l` option by +default. ++ +If you want to break the dependency of a repository cloned with `-s` on +its source repository, you can simply run `git repack -a` to copy all +objects from the source repository into a pack in the cloned repository. --reference <repository>:: If the reference repository is on the local machine diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index ab527b5b31..32ea8564a5 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -305,6 +305,16 @@ range in addition to the new branch name. The new branch name will point to the top-most revision that a 'git-rev-list' of this range will print. +If you need to add 'Acked-by' lines to, say, the last 10 commits (none +of which is a merge), use this command: + +-------------------------------------------------------- +git filter-branch --msg-filter ' + cat && + echo "Acked-by: Bugs Bunny <bunny@bugzilla.org>" +' HEAD~10..HEAD +-------------------------------------------------------- + *NOTE* the changes introduced by the commits, and which are not reverted by subsequent commits, will still be in the rewritten branch. If you want to throw out _changes_ together with the commits, you should use the diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index b753c9d76f..8c700200f5 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -17,6 +17,7 @@ SYNOPSIS [-l | --files-with-matches] [-L | --files-without-match] [-z | --null] [-c | --count] [--all-match] + [--max-depth <depth>] [--color | --no-color] [-A <post-context>] [-B <pre-context>] [-C <context>] [-f <file>] [-e] <pattern> @@ -47,6 +48,10 @@ OPTIONS -I:: Don't match the pattern in binary files. +--max-depth <depth>:: + For each pathspec given on command line, descend at most <depth> + levels of directories. A negative value means no limit. + -w:: --word-regexp:: Match the pattern only at word boundary (either begin at the diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt index 1fd0ff2610..eba3cb4998 100644 --- a/Documentation/git-init-db.txt +++ b/Documentation/git-init-db.txt @@ -8,7 +8,7 @@ git-init-db - Creates an empty git repository SYNOPSIS -------- -'git init-db' [-q | --quiet] [--template=<template_directory>] [--shared[=<permissions>]] +'git init-db' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]] DESCRIPTION diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 7151d12f34..f081b24d9d 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -8,7 +8,7 @@ git-init - Create an empty git repository or reinitialize an existing one SYNOPSIS -------- -'git init' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]] +'git init' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]] [directory] OPTIONS @@ -74,6 +74,9 @@ By default, the configuration flag receive.denyNonFastForwards is enabled in shared repositories, so that you cannot force a non fast-forwarding push into it. +If you name a (possibly non-existent) directory at the end of the command +line, the command is run inside the directory (possibly after creating it). + -- diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 057a021eb5..021066e95d 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -44,7 +44,7 @@ OPTIONS -o:: --others:: - Show other files in the output + Show other (i.e. untracked) files in the output -i:: --ignored:: diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index 767486c770..ce5b369985 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -8,12 +8,12 @@ git-merge-base - Find as good common ancestors as possible for a merge SYNOPSIS -------- -'git merge-base' [--all] <commit> <commit>... +'git merge-base' [-a|--all] <commit> <commit>... DESCRIPTION ----------- -'git-merge-base' finds best common ancestor(s) between two commits to use +'git merge-base' finds best common ancestor(s) between two commits to use in a three-way merge. One common ancestor is 'better' than another common ancestor if the latter is an ancestor of the former. A common ancestor that does not have any better common ancestor is a 'best common @@ -27,8 +27,13 @@ commits on the command line. As the most common special case, specifying only two commits on the command line means computing the merge base between the given two commits. +As a consequence, the 'merge base' is not necessarily contained in each of the +commit arguments if more than two commits are specified. This is different +from linkgit:git-show-branch[1] when used with the `--merge-base` option. + OPTIONS ------- +-a:: --all:: Output all merge bases for the commits, instead of just one. diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index c04ae739ed..af68d694a0 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git merge' [-n] [--stat] [--no-commit] [--squash] [-s <strategy>]... - [-m <msg>] <remote> <remote>... + [-m <msg>] <remote>... 'git merge' <msg> HEAD <remote>... DESCRIPTION diff --git a/Documentation/git-prune-packed.txt b/Documentation/git-prune-packed.txt index b5f26cee13..abfc6b6ead 100644 --- a/Documentation/git-prune-packed.txt +++ b/Documentation/git-prune-packed.txt @@ -8,7 +8,7 @@ git-prune-packed - Remove extra objects that are already in pack files SYNOPSIS -------- -'git prune-packed' [-n] [-q] +'git prune-packed' [-n|--dry-run] [-q|--quiet] DESCRIPTION @@ -28,10 +28,12 @@ disk storage, etc. OPTIONS ------- -n:: +--dry-run:: Don't actually remove any objects, only show those that would have been removed. -q:: +--quiet:: Squelch the progress indicator. Author diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 2653388fd8..58d2bd5d4a 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -195,6 +195,92 @@ reason:: refs, no explanation is needed. For a failed ref, the reason for failure is described. +Note about fast-forwards +------------------------ + +When an update changes a branch (or more in general, a ref) that used to +point at commit A to point at another commit B, it is called a +fast-forward update if and only if B is a descendant of A. + +In a fast-forward update from A to B, the set of commits that the original +commit A built on top of is a subset of the commits the new commit B +builds on top of. Hence, it does not lose any history. + +In contrast, a non-fast-forward update will lose history. For example, +suppose you and somebody else started at the same commit X, and you built +a history leading to commit B while the other person built a history +leading to commit A. The history looks like this: + +---------------- + + B + / + ---X---A + +---------------- + +Further suppose that the other person already pushed changes leading to A +back to the original repository you two obtained the original commit X. + +The push done by the other person updated the branch that used to point at +commit X to point at commit A. It is a fast-forward. + +But if you try to push, you will attempt to update the branch (that +now points at A) with commit B. This does _not_ fast-forward. If you did +so, the changes introduced by commit A will be lost, because everybody +will now start building on top of B. + +The command by default does not allow an update that is not a fast-forward +to prevent such loss of history. + +If you do not want to lose your work (history from X to B) nor the work by +the other person (history from X to A), you would need to first fetch the +history from the repository, create a history that contains changes done +by both parties, and push the result back. + +You can perform "git pull", resolve potential conflicts, and "git push" +the result. A "git pull" will create a merge commit C between commits A +and B. + +---------------- + + B---C + / / + ---X---A + +---------------- + +Updating A with the resulting merge commit will fast-forward and your +push will be accepted. + +Alternatively, you can rebase your change between X and B on top of A, +with "git pull --rebase", and push the result back. The rebase will +create a new commit D that builds the change between X and B on top of +A. + +---------------- + + B D + / / + ---X---A + +---------------- + +Again, updating A with this commit will fast-forward and your push will be +accepted. + +There is another common situation where you may encounter non-fast-forward +rejection when you try to push, and it is possible even when you are +pushing into a repository nobody else pushes into. After you push commit +A yourself (in the first picture in this section), replace it with "git +commit --amend" to produce commit B, and you try to push it out, because +forgot that you have pushed A out already. In such a case, and only if +you are certain that nobody in the meantime fetched your earlier commit A +(and started building on top of it), you can run "git push --force" to +overwrite it. In other words, "git push --force" is a method reserved for +a case where you do mean to lose history. + + Examples -------- diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index 7160fa1536..4a932b08c6 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -8,7 +8,10 @@ git-read-tree - Reads tree information into the index SYNOPSIS -------- -'git read-tree' (<tree-ish> | [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u | -i]] [--exclude-per-directory=<gitignore>] [--index-output=<file>] <tree-ish1> [<tree-ish2> [<tree-ish3>]]) +'git read-tree' [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] + [-u [--exclude-per-directory=<gitignore>] | -i]] + [--index-output=<file>] + <tree-ish1> [<tree-ish2> [<tree-ish3>]] DESCRIPTION diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 9e2b4eaa38..82a3d29673 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -114,14 +114,14 @@ These stale branches have already been removed from the remote repository referenced by <name>, but are still locally available in "remotes/<name>". + -With `--dry-run` option, report what branches will be pruned, but do no +With `--dry-run` option, report what branches will be pruned, but do not actually prune them. 'update':: Fetch updates for a named set of remotes in the repository as defined by remotes.<group>. If a named group is not specified on the command line, -the configuration parameter remotes.default will get used; if +the configuration parameter remotes.default will be used; if remotes.default is not defined, all remotes which do not have the configuration parameter remote.<name>.skipDefaultUpdate set to true will be updated. (See linkgit:git-config[1]). diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index a765cfa4d2..3341d1b62f 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -51,20 +51,26 @@ SYNOPSIS DESCRIPTION ----------- -Lists commit objects in reverse chronological order starting at the -given commit(s), taking ancestry relationship into account. This is -useful to produce human-readable log output. +List commits that are reachable by following the `parent` links from the +given commit(s), but exclude commits that are reachable from the one(s) +given with a '{caret}' in front of them. The output is given in reverse +chronological order by default. -Commits which are stated with a preceding '{caret}' cause listing to -stop at that point. Their parents are implied. Thus the following -command: +You can think of this as a set operation. Commits given on the command +line form a set of commits that are reachable from any of them, and then +commits reachable from any of the ones given with '{caret}' in front are +subtracted from that set. The remaining commits are what comes out in the +command's output. Various other options and paths parameters can be used +to further limit the result. + +Thus, the following command: ----------------------------------------------------------------------- $ git rev-list foo bar ^baz ----------------------------------------------------------------------- -means "list all the commits which are included in 'foo' and 'bar', but -not in 'baz'". +means "list all the commits which are reachable from 'foo' or 'bar', but +not from 'baz'". A special notation "'<commit1>'..'<commit2>'" can be used as a short-hand for "{caret}'<commit1>' '<commit2>'". For example, either of @@ -84,7 +90,7 @@ between the two operands. The following two commands are equivalent: $ git rev-list A...B ----------------------------------------------------------------------- -'git-rev-list' is a very essential git program, since it +'rev-list' is a very essential git command, since it provides the ability to build and traverse commit ancestry graphs. For this reason, it has a lot of different options that enables it to be used by commands as different as 'git-bisect' and diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index 89ec5364ec..734336119c 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -8,11 +8,12 @@ git-show-branch - Show branches and their commits SYNOPSIS -------- [verse] -'git show-branch' [--all] [--remotes] [--topo-order | --date-order] - [--current] [--color | --no-color] +'git show-branch' [-a|--all] [-r|--remotes] [--topo-order | --date-order] + [--current] [--color | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]... + 'git show-branch' (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>] DESCRIPTION @@ -81,9 +82,11 @@ OPTIONS Synonym to `--more=-1` --merge-base:: - Instead of showing the commit list, just act like the - 'git-merge-base -a' command, except that it can accept - more than two heads. + Instead of showing the commit list, determine possible + merge bases for the specified commits. All merge bases + will be contained in all specified commits. This is + different from how linkgit:git-merge-base[1] handles + the case of three or more commits. --independent:: Among the <reference>s given, display only the ones that diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 1c64a02fe5..2f5ca7b1a3 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -114,7 +114,8 @@ no conflicts. clear:: Remove all the stashed states. Note that those states will then - be subject to pruning, and may be difficult or impossible to recover. + be subject to pruning, and may be impossible to recover (see + 'Examples' below for a possible strategy). drop [-q|--quiet] [<stash>]:: @@ -217,6 +218,20 @@ $ edit/build/test remaining parts $ git commit foo -m 'Remaining parts' ---------------------------------------------------------------- +Recovering stashes that were cleared/dropped erroneously:: + +If you mistakenly drop or clear stashes, they cannot be recovered +through the normal safety mechanisms. However, you can try the +following incantation to get a list of stashes that are still in your +repository, but not reachable any more: ++ +---------------------------------------------------------------- +git fsck --unreachable | +grep commit | cut -d\ -f3 | +xargs git log --merges --no-walk --grep=WIP +---------------------------------------------------------------- + + SEE ALSO -------- linkgit:git-checkout[1], diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 683ba1a1eb..7dd73ae14e 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -14,8 +14,8 @@ SYNOPSIS 'git submodule' [--quiet] status [--cached] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] 'git submodule' [--quiet] update [--init] [-N|--no-fetch] [--rebase] - [--reference <repository>] [--] [<path>...] -'git submodule' [--quiet] summary [--summary-limit <n>] [commit] [--] [<path>...] + [--reference <repository>] [--merge] [--] [<path>...] +'git submodule' [--quiet] summary [--cached] [--summary-limit <n>] [commit] [--] [<path>...] 'git submodule' [--quiet] foreach <command> 'git submodule' [--quiet] sync [--] [<path>...] diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 22a0389f1e..1812890a7e 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -102,9 +102,6 @@ COMMANDS Store Git commit times in the local timezone instead of UTC. This makes 'git log' (even without --date=local) show the same times that `svn log` would in the local timezone. - ---parent;; - Fetch only from the SVN parent of the current HEAD. + This doesn't interfere with interoperating with the Subversion repository you cloned from, but if you wish for your local Git @@ -112,6 +109,9 @@ repository to be able to interoperate with someone else's local Git repository, either don't use this option or you should both use it in the same local timezone. +--parent;; + Fetch only from the SVN parent of the current HEAD. + --ignore-paths=<regex>;; This allows one to specify a Perl regular expression that will cause skipping of all matching paths from checkout from SVN. diff --git a/Documentation/git-symbolic-ref.txt b/Documentation/git-symbolic-ref.txt index 210fde03a1..6392538807 100644 --- a/Documentation/git-symbolic-ref.txt +++ b/Documentation/git-symbolic-ref.txt @@ -14,9 +14,9 @@ DESCRIPTION Given one argument, reads which branch head the given symbolic ref refers to and outputs its path, relative to the `.git/` directory. Typically you would give `HEAD` as the <name> -argument to see on which branch your working tree is on. +argument to see which branch your working tree is on. -Give two arguments, create or update a symbolic ref <name> to +Given two arguments, creates or updates a symbolic ref <name> to point at the given branch <ref>. A symbolic ref is a regular file that stores a string that diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index fa733214ab..1118ce22dc 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -17,7 +17,10 @@ SYNOPSIS DESCRIPTION ----------- -Adds a 'tag' reference in `.git/refs/tags/` + +Adds a 'tag' reference in `.git/refs/tags/`. The tag <name> must pass +linkgit:git-check-ref-format[1] which basicly means that control characters, +space, ~, ^, :, ?, *, [ and \ are prohibited. Unless `-f` is given, the tag must not yet exist in `.git/refs/tags/` directory. diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt index c8611632d1..d791a80819 100644 --- a/Documentation/git-verify-pack.txt +++ b/Documentation/git-verify-pack.txt @@ -8,7 +8,7 @@ git-verify-pack - Validate packed git archive files SYNOPSIS -------- -'git verify-pack' [-v] [--] <pack>.idx ... +'git verify-pack' [-v|--verbose] [--] <pack>.idx ... DESCRIPTION @@ -23,6 +23,7 @@ OPTIONS The idx files to verify. -v:: +--verbose:: After verifying the pack, show list of objects contained in the pack. \--:: diff --git a/Documentation/git.txt b/Documentation/git.txt index 5fd5953e29..5832c752e1 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -327,7 +327,7 @@ Synching repositories include::cmds-synchingrepositories.txt[] -The following are helper programs used by the above; end users +The following are helper commands used by the above; end users typically do not use them directly. include::cmds-synchelpers.txt[] diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index aaa073efc8..1195e83b6e 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -404,7 +404,7 @@ Performing a three-way merge The attribute `merge` affects how three versions of a file is merged when a file-level merge is necessary during `git merge`, -and other programs such as `git revert` and `git cherry-pick`. +and other commands such as `git revert` and `git cherry-pick`. Set:: diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 7ba5e589d7..b3640c4e64 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -12,7 +12,7 @@ git * DESCRIPTION ----------- -This tutorial explains how to use the "core" git programs to set up and +This tutorial explains how to use the "core" git commands to set up and work with a git repository. If you just need to use git as a revision control system you may prefer @@ -1328,7 +1328,7 @@ into it later. Obviously, this repository creation needs to be done only once. [NOTE] -'git-push' uses a pair of programs, +'git-push' uses a pair of commands, 'git-send-pack' on your local machine, and 'git-receive-pack' on the remote machine. The communication between the two over the network internally uses an SSH connection. diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt index 2efe7a40be..b26c28133c 100644 --- a/Documentation/technical/api-run-command.txt +++ b/Documentation/technical/api-run-command.txt @@ -35,12 +35,32 @@ Functions Convenience functions that encapsulate a sequence of start_command() followed by finish_command(). The argument argv specifies the program and its arguments. The argument opt is zero - or more of the flags `RUN_COMMAND_NO_STDIN`, `RUN_GIT_CMD`, or - `RUN_COMMAND_STDOUT_TO_STDERR` that correspond to the members - .no_stdin, .git_cmd, .stdout_to_stderr of `struct child_process`. + or more of the flags `RUN_COMMAND_NO_STDIN`, `RUN_GIT_CMD`, + `RUN_COMMAND_STDOUT_TO_STDERR`, or `RUN_SILENT_EXEC_FAILURE` + that correspond to the members .no_stdin, .git_cmd, + .stdout_to_stderr, .silent_exec_failure of `struct child_process`. The argument dir corresponds the member .dir. The argument env corresponds to the member .env. +The functions above do the following: + +. If a system call failed, errno is set and -1 is returned. A diagnostic + is printed. + +. If the program was not found, then -1 is returned and errno is set to + ENOENT; a diagnostic is printed only if .silent_exec_failure is 0. + +. Otherwise, the program is run. If it terminates regularly, its exit + code is returned. No diagnistic is printed, even if the exit code is + non-zero. + +. If the program terminated due to a signal, then the return value is the + signal number - 128, ie. it is negative and so indicates an unusual + condition; a diagnostic is printed. This return value can be passed to + exit(2), which will report the same code to the parent process that a + POSIX shell's $? would report for a program that died from the signal. + + `start_async`:: Run a function asynchronously. Takes a pointer to a `struct @@ -143,6 +163,11 @@ string pointers (NULL terminated) in .env: To specify a new initial working directory for the sub-process, specify it in the .dir member. +If the program cannot be found, the functions return -1 and set +errno to ENOENT. Normally, an error message is printed, but if +.silent_exec_failure is set to 1, no message is printed for this +special error condition. + * `struct async` diff --git a/Documentation/technical/api-tree-walking.txt b/Documentation/technical/api-tree-walking.txt index e3ddf91284..55b728632c 100644 --- a/Documentation/technical/api-tree-walking.txt +++ b/Documentation/technical/api-tree-walking.txt @@ -1,12 +1,145 @@ tree walking API ================ -Talk about <tree-walk.h>, things like +The tree walking API is used to traverse and inspect trees. -* struct tree_desc -* init_tree_desc -* tree_entry_extract -* update_tree_entry -* get_tree_entry +Data Structures +--------------- -(JC, Linus) +`struct name_entry`:: + + An entry in a tree. Each entry has a sha1 identifier, pathname, and + mode. + +`struct tree_desc`:: + + A semi-opaque data structure used to maintain the current state of the + walk. ++ +* `buffer` is a pointer into the memory representation of the tree. It always +points at the current entry being visited. + +* `size` counts the number of bytes left in the `buffer`. + +* `entry` points to the current entry being visited. + +`struct traverse_info`:: + + A structure used to maintain the state of a traversal. ++ +* `prev` points to the traverse_info which was used to descend into the +current tree. If this is the top-level tree `prev` will point to +a dummy traverse_info. + +* `name` is the entry for the current tree (if the tree is a subtree). + +* `pathlen` is the length of the full path for the current tree. + +* `conflicts` can be used by callbacks to maintain directory-file conflicts. + +* `fn` is a callback called for each entry in the tree. See Traversing for more +information. + +* `data` can be anything the `fn` callback would want to use. + +Initializing +------------ + +`init_tree_desc`:: + + Initialize a `tree_desc` and decode its first entry. The buffer and + size parameters are assumed to be the same as the buffer and size + members of `struct tree`. + +`fill_tree_descriptor`:: + + Initialize a `tree_desc` and decode its first entry given the sha1 of + a tree. Returns the `buffer` member if the sha1 is a valid tree + identifier and NULL otherwise. + +`setup_traverse_info`:: + + Initialize a `traverse_info` given the pathname of the tree to start + traversing from. The `base` argument is assumed to be the `path` + member of the `name_entry` being recursed into unless the tree is a + top-level tree in which case the empty string ("") is used. + +Walking +------- + +`tree_entry`:: + + Visit the next entry in a tree. Returns 1 when there are more entries + left to visit and 0 when all entries have been visited. This is + commonly used in the test of a while loop. + +`tree_entry_len`:: + + Calculate the length of a tree entry's pathname. This utilizes the + memory structure of a tree entry to avoid the overhead of using a + generic strlen(). + +`update_tree_entry`:: + + Walk to the next entry in a tree. This is commonly used in conjunction + with `tree_entry_extract` to inspect the current entry. + +`tree_entry_extract`:: + + Decode the entry currently being visited (the one pointed to by + `tree_desc's` `entry` member) and return the sha1 of the entry. The + `pathp` and `modep` arguments are set to the entry's pathname and mode + respectively. + +`get_tree_entry`:: + + Find an entry in a tree given a pathname and the sha1 of a tree to + search. Returns 0 if the entry is found and -1 otherwise. The third + and fourth parameters are set to the entry's sha1 and mode + respectively. + +Traversing +---------- + +`traverse_trees`:: + + Traverse `n` number of trees in parallel. The `fn` callback member of + `traverse_info` is called once for each tree entry. + +`traverse_callback_t`:: + The arguments passed to the traverse callback are as follows: ++ +* `n` counts the number of trees being traversed. + +* `mask` has its nth bit set if something exists in the nth entry. + +* `dirmask` has its nth bit set if the nth tree's entry is a directory. + +* `entry` is an array of size `n` where the nth entry is from the nth tree. + +* `info` maintains the state of the traversal. + ++ +Returning a negative value will terminate the traversal. Otherwise the +return value is treated as an update mask. If the nth bit is set the nth tree +will be updated and if the bit is not set the nth tree entry will be the +same in the next callback invocation. + +`make_traverse_path`:: + + Generate the full pathname of a tree entry based from the root of the + traversal. For example, if the traversal has recursed into another + tree named "bar" the pathname of an entry "baz" in the "bar" + tree would be "bar/baz". + +`traverse_path_len`:: + + Calculate the length of a pathname returned by `make_traverse_path`. + This utilizes the memory structure of a tree entry to avoid the + overhead of using a generic strlen(). + +Authors +------- + +Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds +<torvalds@linux-foundation.org> diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 0b88a51d0b..67ebffa568 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -4131,7 +4131,7 @@ What does this mean? `git rev-list` is the original version of the revision walker, which _always_ printed a list of revisions to stdout. It is still functional, -and needs to, since most new Git programs start out as scripts using +and needs to, since most new Git commands start out as scripts using `git rev-list`. `git rev-parse` is not as important any more; it was only used to filter out @@ -84,6 +84,10 @@ all:: # specify your own (or DarwinPort's) include directories and # library directories by defining CFLAGS and LDFLAGS appropriately. # +# Define BLK_SHA1 environment variable if you want the C version +# of the SHA1 that assumes you can do unaligned 32-bit loads and +# have a fast htonl() function. +# # Define PPC_SHA1 environment variable when running make to make use of # a bundled SHA1 routine optimized for PowerPC. # @@ -1167,6 +1171,10 @@ ifdef NO_DEFLATE_BOUND BASIC_CFLAGS += -DNO_DEFLATE_BOUND endif +ifdef BLK_SHA1 + SHA1_HEADER = "block-sha1/sha1.h" + LIB_OBJS += block-sha1/sha1.o +else ifdef PPC_SHA1 SHA1_HEADER = "ppc/sha1.h" LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o @@ -1184,6 +1192,7 @@ else endif endif endif +endif ifdef NO_PERL_MAKEMAKER export NO_PERL_MAKEMAKER endif diff --git a/block-sha1/sha1.c b/block-sha1/sha1.c new file mode 100644 index 0000000000..464cb258aa --- /dev/null +++ b/block-sha1/sha1.c @@ -0,0 +1,280 @@ +/* + * Based on the Mozilla SHA1 (see mozilla-sha1/sha1.c), + * optimized to do word accesses rather than byte accesses, + * and to avoid unnecessary copies into the context array. + */ + +#include <string.h> +#include <arpa/inet.h> + +#include "sha1.h" + +#if defined(__i386__) || defined(__x86_64__) + +/* + * Force usage of rol or ror by selecting the one with the smaller constant. + * It _can_ generate slightly smaller code (a constant of 1 is special), but + * perhaps more importantly it's possibly faster on any uarch that does a + * rotate with a loop. + */ + +#define SHA_ASM(op, x, n) ({ unsigned int __res; __asm__(op " %1,%0":"=r" (__res):"i" (n), "0" (x)); __res; }) +#define SHA_ROL(x,n) SHA_ASM("rol", x, n) +#define SHA_ROR(x,n) SHA_ASM("ror", x, n) + +#else + +#define SHA_ROT(X,l,r) (((X) << (l)) | ((X) >> (r))) +#define SHA_ROL(X,n) SHA_ROT(X,n,32-(n)) +#define SHA_ROR(X,n) SHA_ROT(X,32-(n),n) + +#endif + +/* + * If you have 32 registers or more, the compiler can (and should) + * try to change the array[] accesses into registers. However, on + * machines with less than ~25 registers, that won't really work, + * and at least gcc will make an unholy mess of it. + * + * So to avoid that mess which just slows things down, we force + * the stores to memory to actually happen (we might be better off + * with a 'W(t)=(val);asm("":"+m" (W(t))' there instead, as + * suggested by Artur Skawina - that will also make gcc unable to + * try to do the silly "optimize away loads" part because it won't + * see what the value will be). + * + * Ben Herrenschmidt reports that on PPC, the C version comes close + * to the optimized asm with this (ie on PPC you don't want that + * 'volatile', since there are lots of registers). + * + * On ARM we get the best code generation by forcing a full memory barrier + * between each SHA_ROUND, otherwise gcc happily get wild with spilling and + * the stack frame size simply explode and performance goes down the drain. + */ + +#if defined(__i386__) || defined(__x86_64__) + #define setW(x, val) (*(volatile unsigned int *)&W(x) = (val)) +#elif defined(__arm__) + #define setW(x, val) do { W(x) = (val); __asm__("":::"memory"); } while (0) +#else + #define setW(x, val) (W(x) = (val)) +#endif + +/* + * Performance might be improved if the CPU architecture is OK with + * unaligned 32-bit loads and a fast ntohl() is available. + * Otherwise fall back to byte loads and shifts which is portable, + * and is faster on architectures with memory alignment issues. + */ + +#if defined(__i386__) || defined(__x86_64__) || \ + defined(__ppc__) || defined(__ppc64__) || \ + defined(__powerpc__) || defined(__powerpc64__) || \ + defined(__s390__) || defined(__s390x__) + +#define get_be32(p) ntohl(*(unsigned int *)(p)) +#define put_be32(p, v) do { *(unsigned int *)(p) = htonl(v); } while (0) + +#else + +#define get_be32(p) ( \ + (*((unsigned char *)(p) + 0) << 24) | \ + (*((unsigned char *)(p) + 1) << 16) | \ + (*((unsigned char *)(p) + 2) << 8) | \ + (*((unsigned char *)(p) + 3) << 0) ) +#define put_be32(p, v) do { \ + unsigned int __v = (v); \ + *((unsigned char *)(p) + 0) = __v >> 24; \ + *((unsigned char *)(p) + 1) = __v >> 16; \ + *((unsigned char *)(p) + 2) = __v >> 8; \ + *((unsigned char *)(p) + 3) = __v >> 0; } while (0) + +#endif + +/* This "rolls" over the 512-bit array */ +#define W(x) (array[(x)&15]) + +/* + * Where do we get the source from? The first 16 iterations get it from + * the input data, the next mix it from the 512-bit array. + */ +#define SHA_SRC(t) get_be32(data + t) +#define SHA_MIX(t) SHA_ROL(W(t+13) ^ W(t+8) ^ W(t+2) ^ W(t), 1) + +#define SHA_ROUND(t, input, fn, constant, A, B, C, D, E) do { \ + unsigned int TEMP = input(t); setW(t, TEMP); \ + E += TEMP + SHA_ROL(A,5) + (fn) + (constant); \ + B = SHA_ROR(B, 2); } while (0) + +#define T_0_15(t, A, B, C, D, E) SHA_ROUND(t, SHA_SRC, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) +#define T_16_19(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) +#define T_20_39(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0x6ed9eba1, A, B, C, D, E ) +#define T_40_59(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, ((B&C)+(D&(B^C))) , 0x8f1bbcdc, A, B, C, D, E ) +#define T_60_79(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0xca62c1d6, A, B, C, D, E ) + +static void blk_SHA1_Block(blk_SHA_CTX *ctx, const unsigned int *data) +{ + unsigned int A,B,C,D,E; + unsigned int array[16]; + + A = ctx->H[0]; + B = ctx->H[1]; + C = ctx->H[2]; + D = ctx->H[3]; + E = ctx->H[4]; + + /* Round 1 - iterations 0-16 take their input from 'data' */ + T_0_15( 0, A, B, C, D, E); + T_0_15( 1, E, A, B, C, D); + T_0_15( 2, D, E, A, B, C); + T_0_15( 3, C, D, E, A, B); + T_0_15( 4, B, C, D, E, A); + T_0_15( 5, A, B, C, D, E); + T_0_15( 6, E, A, B, C, D); + T_0_15( 7, D, E, A, B, C); + T_0_15( 8, C, D, E, A, B); + T_0_15( 9, B, C, D, E, A); + T_0_15(10, A, B, C, D, E); + T_0_15(11, E, A, B, C, D); + T_0_15(12, D, E, A, B, C); + T_0_15(13, C, D, E, A, B); + T_0_15(14, B, C, D, E, A); + T_0_15(15, A, B, C, D, E); + + /* Round 1 - tail. Input from 512-bit mixing array */ + T_16_19(16, E, A, B, C, D); + T_16_19(17, D, E, A, B, C); + T_16_19(18, C, D, E, A, B); + T_16_19(19, B, C, D, E, A); + + /* Round 2 */ + T_20_39(20, A, B, C, D, E); + T_20_39(21, E, A, B, C, D); + T_20_39(22, D, E, A, B, C); + T_20_39(23, C, D, E, A, B); + T_20_39(24, B, C, D, E, A); + T_20_39(25, A, B, C, D, E); + T_20_39(26, E, A, B, C, D); + T_20_39(27, D, E, A, B, C); + T_20_39(28, C, D, E, A, B); + T_20_39(29, B, C, D, E, A); + T_20_39(30, A, B, C, D, E); + T_20_39(31, E, A, B, C, D); + T_20_39(32, D, E, A, B, C); + T_20_39(33, C, D, E, A, B); + T_20_39(34, B, C, D, E, A); + T_20_39(35, A, B, C, D, E); + T_20_39(36, E, A, B, C, D); + T_20_39(37, D, E, A, B, C); + T_20_39(38, C, D, E, A, B); + T_20_39(39, B, C, D, E, A); + + /* Round 3 */ + T_40_59(40, A, B, C, D, E); + T_40_59(41, E, A, B, C, D); + T_40_59(42, D, E, A, B, C); + T_40_59(43, C, D, E, A, B); + T_40_59(44, B, C, D, E, A); + T_40_59(45, A, B, C, D, E); + T_40_59(46, E, A, B, C, D); + T_40_59(47, D, E, A, B, C); + T_40_59(48, C, D, E, A, B); + T_40_59(49, B, C, D, E, A); + T_40_59(50, A, B, C, D, E); + T_40_59(51, E, A, B, C, D); + T_40_59(52, D, E, A, B, C); + T_40_59(53, C, D, E, A, B); + T_40_59(54, B, C, D, E, A); + T_40_59(55, A, B, C, D, E); + T_40_59(56, E, A, B, C, D); + T_40_59(57, D, E, A, B, C); + T_40_59(58, C, D, E, A, B); + T_40_59(59, B, C, D, E, A); + + /* Round 4 */ + T_60_79(60, A, B, C, D, E); + T_60_79(61, E, A, B, C, D); + T_60_79(62, D, E, A, B, C); + T_60_79(63, C, D, E, A, B); + T_60_79(64, B, C, D, E, A); + T_60_79(65, A, B, C, D, E); + T_60_79(66, E, A, B, C, D); + T_60_79(67, D, E, A, B, C); + T_60_79(68, C, D, E, A, B); + T_60_79(69, B, C, D, E, A); + T_60_79(70, A, B, C, D, E); + T_60_79(71, E, A, B, C, D); + T_60_79(72, D, E, A, B, C); + T_60_79(73, C, D, E, A, B); + T_60_79(74, B, C, D, E, A); + T_60_79(75, A, B, C, D, E); + T_60_79(76, E, A, B, C, D); + T_60_79(77, D, E, A, B, C); + T_60_79(78, C, D, E, A, B); + T_60_79(79, B, C, D, E, A); + + ctx->H[0] += A; + ctx->H[1] += B; + ctx->H[2] += C; + ctx->H[3] += D; + ctx->H[4] += E; +} + +void blk_SHA1_Init(blk_SHA_CTX *ctx) +{ + ctx->size = 0; + + /* Initialize H with the magic constants (see FIPS180 for constants) */ + ctx->H[0] = 0x67452301; + ctx->H[1] = 0xefcdab89; + ctx->H[2] = 0x98badcfe; + ctx->H[3] = 0x10325476; + ctx->H[4] = 0xc3d2e1f0; +} + +void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *data, unsigned long len) +{ + int lenW = ctx->size & 63; + + ctx->size += len; + + /* Read the data into W and process blocks as they get full */ + if (lenW) { + int left = 64 - lenW; + if (len < left) + left = len; + memcpy(lenW + (char *)ctx->W, data, left); + lenW = (lenW + left) & 63; + len -= left; + data = ((const char *)data + left); + if (lenW) + return; + blk_SHA1_Block(ctx, ctx->W); + } + while (len >= 64) { + blk_SHA1_Block(ctx, data); + data = ((const char *)data + 64); + len -= 64; + } + if (len) + memcpy(ctx->W, data, len); +} + +void blk_SHA1_Final(unsigned char hashout[20], blk_SHA_CTX *ctx) +{ + static const unsigned char pad[64] = { 0x80 }; + unsigned int padlen[2]; + int i; + + /* Pad with a binary 1 (ie 0x80), then zeroes, then length */ + padlen[0] = htonl(ctx->size >> 29); + padlen[1] = htonl(ctx->size << 3); + + i = ctx->size & 63; + blk_SHA1_Update(ctx, pad, 1+ (63 & (55 - i))); + blk_SHA1_Update(ctx, padlen, 8); + + /* Output hash */ + for (i = 0; i < 5; i++) + put_be32(hashout + i*4, ctx->H[i]); +} diff --git a/block-sha1/sha1.h b/block-sha1/sha1.h new file mode 100644 index 0000000000..c1ae74d3da --- /dev/null +++ b/block-sha1/sha1.h @@ -0,0 +1,20 @@ +/* + * Based on the Mozilla SHA1 (see mozilla-sha1/sha1.h), + * optimized to do word accesses rather than byte accesses, + * and to avoid unnecessary copies into the context array. + */ + +typedef struct { + unsigned int H[5]; + unsigned int W[16]; + unsigned long long size; +} blk_SHA_CTX; + +void blk_SHA1_Init(blk_SHA_CTX *ctx); +void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *dataIn, unsigned long len); +void blk_SHA1_Final(unsigned char hashout[20], blk_SHA_CTX *ctx); + +#define git_SHA_CTX blk_SHA_CTX +#define git_SHA1_Init blk_SHA1_Init +#define git_SHA1_Update blk_SHA1_Update +#define git_SHA1_Final blk_SHA1_Final diff --git a/builtin-apply.c b/builtin-apply.c index dc0ff5e08a..39dc96ae02 100644 --- a/builtin-apply.c +++ b/builtin-apply.c @@ -458,6 +458,76 @@ static int guess_p_value(const char *nameline) } /* + * Does the ---/+++ line has the POSIX timestamp after the last HT? + * GNU diff puts epoch there to signal a creation/deletion event. Is + * this such a timestamp? + */ +static int has_epoch_timestamp(const char *nameline) +{ + /* + * We are only interested in epoch timestamp; any non-zero + * fraction cannot be one, hence "(\.0+)?" in the regexp below. + * For the same reason, the date must be either 1969-12-31 or + * 1970-01-01, and the seconds part must be "00". + */ + const char stamp_regexp[] = + "^(1969-12-31|1970-01-01)" + " " + "[0-2][0-9]:[0-5][0-9]:00(\\.0+)?" + " " + "([-+][0-2][0-9][0-5][0-9])\n"; + const char *timestamp = NULL, *cp; + static regex_t *stamp; + regmatch_t m[10]; + int zoneoffset; + int hourminute; + int status; + + for (cp = nameline; *cp != '\n'; cp++) { + if (*cp == '\t') + timestamp = cp + 1; + } + if (!timestamp) + return 0; + if (!stamp) { + stamp = xmalloc(sizeof(*stamp)); + if (regcomp(stamp, stamp_regexp, REG_EXTENDED)) { + warning("Cannot prepare timestamp regexp %s", + stamp_regexp); + return 0; + } + } + + status = regexec(stamp, timestamp, ARRAY_SIZE(m), m, 0); + if (status) { + if (status != REG_NOMATCH) + warning("regexec returned %d for input: %s", + status, timestamp); + return 0; + } + + zoneoffset = strtol(timestamp + m[3].rm_so + 1, NULL, 10); + zoneoffset = (zoneoffset / 100) * 60 + (zoneoffset % 100); + if (timestamp[m[3].rm_so] == '-') + zoneoffset = -zoneoffset; + + /* + * YYYY-MM-DD hh:mm:ss must be from either 1969-12-31 + * (west of GMT) or 1970-01-01 (east of GMT) + */ + if ((zoneoffset < 0 && memcmp(timestamp, "1969-12-31", 10)) || + (0 <= zoneoffset && memcmp(timestamp, "1970-01-01", 10))) + return 0; + + hourminute = (strtol(timestamp + 11, NULL, 10) * 60 + + strtol(timestamp + 14, NULL, 10) - + zoneoffset); + + return ((zoneoffset < 0 && hourminute == 1440) || + (0 <= zoneoffset && !hourminute)); +} + +/* * Get the name etc info from the ---/+++ lines of a traditional patch header * * FIXME! The end-of-filename heuristics are kind of screwy. For existing @@ -493,7 +563,17 @@ static void parse_traditional_patch(const char *first, const char *second, struc } else { name = find_name(first, NULL, p_value, TERM_SPACE | TERM_TAB); name = find_name(second, name, p_value, TERM_SPACE | TERM_TAB); - patch->old_name = patch->new_name = name; + if (has_epoch_timestamp(first)) { + patch->is_new = 1; + patch->is_delete = 0; + patch->new_name = name; + } else if (has_epoch_timestamp(second)) { + patch->is_new = 0; + patch->is_delete = 1; + patch->old_name = name; + } else { + patch->old_name = patch->new_name = name; + } } if (!name) die("unable to find filename in patch at line %d", linenr); diff --git a/builtin-clean.c b/builtin-clean.c index 2d8c735d48..05c763cbec 100644 --- a/builtin-clean.c +++ b/builtin-clean.c @@ -31,6 +31,7 @@ int cmd_clean(int argc, const char **argv, const char *prefix) int i; int show_only = 0, remove_directories = 0, quiet = 0, ignored = 0; int ignored_only = 0, baselen = 0, config_set = 0, errors = 0; + int rm_flags = REMOVE_DIR_KEEP_NESTED_GIT; struct strbuf directory = STRBUF_INIT; struct dir_struct dir; static const char **pathspec; @@ -69,6 +70,9 @@ int cmd_clean(int argc, const char **argv, const char *prefix) die("clean.requireForce%s set and -n or -f not given; " "refusing to clean", config_set ? "" : " not"); + if (force > 1) + rm_flags = 0; + dir.flags |= DIR_SHOW_OTHER_DIRECTORIES; if (!ignored) @@ -131,7 +135,8 @@ int cmd_clean(int argc, const char **argv, const char *prefix) (matches == MATCHED_EXACTLY)) { if (!quiet) printf("Removing %s\n", qname); - if (remove_dir_recursively(&directory, 0) != 0) { + if (remove_dir_recursively(&directory, + rm_flags) != 0) { warning("failed to remove '%s'", qname); errors++; } diff --git a/builtin-describe.c b/builtin-describe.c index 7a662980d1..df67a733ae 100644 --- a/builtin-describe.c +++ b/builtin-describe.c @@ -20,6 +20,7 @@ static int tags; /* Allow lightweight tags */ static int longformat; static int abbrev = DEFAULT_ABBREV; static int max_candidates = 10; +static int found_names; static const char *pattern; static int always; @@ -49,6 +50,7 @@ static void add_to_known_names(const char *path, memcpy(e->path, path, len); commit->util = e; } + found_names = 1; } static int get_name(const char *path, const unsigned char *sha1, int flag, void *cb_data) @@ -195,6 +197,9 @@ static void describe(const char *arg, int last_one) for_each_ref(get_name, NULL); } + if (!found_names) + die("cannot describe '%s'", sha1_to_hex(sha1)); + n = cmit->util; if (n) { /* diff --git a/builtin-diff.c b/builtin-diff.c index 2e51f408f9..ffcdd055ca 100644 --- a/builtin-diff.c +++ b/builtin-diff.c @@ -218,6 +218,8 @@ static int builtin_diff_files(struct rev_info *revs, int argc, const char **argv revs->max_count = 3; else if (!strcmp(argv[1], "-q")) options |= DIFF_SILENT_ON_REMOVED; + else if (!strcmp(argv[1], "-h")) + usage(builtin_diff_usage); else return error("invalid option: %s", argv[1]); argv++; argc--; diff --git a/builtin-grep.c b/builtin-grep.c index f477659100..ad0e0a5385 100644 --- a/builtin-grep.c +++ b/builtin-grep.c @@ -53,25 +53,57 @@ static int grep_config(const char *var, const char *value, void *cb) } /* + * Return non-zero if max_depth is negative or path has no more then max_depth + * slashes. + */ +static int accept_subdir(const char *path, int max_depth) +{ + if (max_depth < 0) + return 1; + + while ((path = strchr(path, '/')) != NULL) { + max_depth--; + if (max_depth < 0) + return 0; + path++; + } + return 1; +} + +/* + * Return non-zero if name is a subdirectory of match and is not too deep. + */ +static int is_subdir(const char *name, int namelen, + const char *match, int matchlen, int max_depth) +{ + if (matchlen > namelen || strncmp(name, match, matchlen)) + return 0; + + if (name[matchlen] == '\0') /* exact match */ + return 1; + + if (!matchlen || match[matchlen-1] == '/' || name[matchlen] == '/') + return accept_subdir(name + matchlen + 1, max_depth); + + return 0; +} + +/* * git grep pathspecs are somewhat different from diff-tree pathspecs; * pathname wildcards are allowed. */ -static int pathspec_matches(const char **paths, const char *name) +static int pathspec_matches(const char **paths, const char *name, int max_depth) { int namelen, i; if (!paths || !*paths) - return 1; + return accept_subdir(name, max_depth); namelen = strlen(name); for (i = 0; paths[i]; i++) { const char *match = paths[i]; int matchlen = strlen(match); const char *cp, *meta; - if (!matchlen || - ((matchlen <= namelen) && - !strncmp(name, match, matchlen) && - (match[matchlen-1] == '/' || - name[matchlen] == '\0' || name[matchlen] == '/'))) + if (is_subdir(name, namelen, match, matchlen, max_depth)) return 1; if (!fnmatch(match, name, 0)) return 1; @@ -421,7 +453,7 @@ static int external_grep(struct grep_opt *opt, const char **paths, int cached) int kept; if (!S_ISREG(ce->ce_mode)) continue; - if (!pathspec_matches(paths, ce->name)) + if (!pathspec_matches(paths, ce->name, opt->max_depth)) continue; name = ce->name; if (name[0] == '-') { @@ -478,7 +510,7 @@ static int grep_cache(struct grep_opt *opt, const char **paths, int cached, struct cache_entry *ce = active_cache[nr]; if (!S_ISREG(ce->ce_mode)) continue; - if (!pathspec_matches(paths, ce->name)) + if (!pathspec_matches(paths, ce->name, opt->max_depth)) continue; /* * If CE_VALID is on, we assume worktree file and its cache entry @@ -538,7 +570,7 @@ static int grep_tree(struct grep_opt *opt, const char **paths, strbuf_addch(&pathbuf, '/'); down = pathbuf.buf + tn_len; - if (!pathspec_matches(paths, down)) + if (!pathspec_matches(paths, down, opt->max_depth)) ; else if (S_ISREG(entry.mode)) hit |= grep_sha1(opt, entry.sha1, pathbuf.buf, tn_len); @@ -692,6 +724,9 @@ int cmd_grep(int argc, const char **argv, const char *prefix) OPT_SET_INT('I', NULL, &opt.binary, "don't match patterns in binary files", GREP_BINARY_NOMATCH), + { OPTION_INTEGER, 0, "max-depth", &opt.max_depth, "depth", + "descend at most <depth> levels", PARSE_OPT_NONEG, + NULL, 1 }, OPT_GROUP(""), OPT_BIT('E', "extended-regexp", &opt.regflags, "use extended POSIX regular expressions", REG_EXTENDED), @@ -768,6 +803,7 @@ int cmd_grep(int argc, const char **argv, const char *prefix) opt.pathname = 1; opt.pattern_tail = &opt.pattern_list; opt.regflags = REG_NEWLINE; + opt.max_depth = -1; strcpy(opt.color_match, GIT_COLOR_RED GIT_COLOR_BOLD); opt.color = -1; diff --git a/builtin-init-db.c b/builtin-init-db.c index 4a5600631c..dd84caecbc 100644 --- a/builtin-init-db.c +++ b/builtin-init-db.c @@ -6,6 +6,7 @@ #include "cache.h" #include "builtin.h" #include "exec_cmd.h" +#include "parse-options.h" #ifndef DEFAULT_GIT_TEMPLATE_DIR #define DEFAULT_GIT_TEMPLATE_DIR "/usr/share/git-core/templates" @@ -370,8 +371,16 @@ static int guess_repository_type(const char *git_dir) return 1; } -static const char init_db_usage[] = -"git init [-q | --quiet] [--bare] [--template=<template-directory>] [--shared[=<permissions>]]"; +static int shared_callback(const struct option *opt, const char *arg, int unset) +{ + *((int *) opt->value) = (arg) ? git_config_perm("arg", arg) : PERM_GROUP; + return 0; +} + +static const char *const init_db_usage[] = { + "git init [-q | --quiet] [--bare] [--template=<template-directory>] [--shared[=<permissions>]] [directory]", + NULL +}; /* * If you want to, you can share the DB area with any number of branches. @@ -384,25 +393,60 @@ int cmd_init_db(int argc, const char **argv, const char *prefix) const char *git_dir; const char *template_dir = NULL; unsigned int flags = 0; - int i; - - for (i = 1; i < argc; i++, argv++) { - const char *arg = argv[1]; - if (!prefixcmp(arg, "--template=")) - template_dir = arg+11; - else if (!strcmp(arg, "--bare")) { - static char git_dir[PATH_MAX+1]; - is_bare_repository_cfg = 1; - setenv(GIT_DIR_ENVIRONMENT, getcwd(git_dir, - sizeof(git_dir)), 0); - } else if (!strcmp(arg, "--shared")) - init_shared_repository = PERM_GROUP; - else if (!prefixcmp(arg, "--shared=")) - init_shared_repository = git_config_perm("arg", arg+9); - else if (!strcmp(arg, "-q") || !strcmp(arg, "--quiet")) - flags |= INIT_DB_QUIET; - else - usage(init_db_usage); + const struct option init_db_options[] = { + OPT_STRING(0, "template", &template_dir, "template-directory", + "provide the directory from which templates will be used"), + OPT_SET_INT(0, "bare", &is_bare_repository_cfg, + "create a bare repository", 1), + { OPTION_CALLBACK, 0, "shared", &init_shared_repository, + "permissions", + "specify that the git repository is to be shared amongst several users", + PARSE_OPT_OPTARG | PARSE_OPT_NONEG, shared_callback, 0}, + OPT_BIT('q', "quiet", &flags, "be quiet", INIT_DB_QUIET), + OPT_END() + }; + + argc = parse_options(argc, argv, prefix, init_db_options, init_db_usage, 0); + + if (argc == 1) { + int mkdir_tried = 0; + retry: + if (chdir(argv[0]) < 0) { + if (!mkdir_tried) { + int saved; + /* + * At this point we haven't read any configuration, + * and we know shared_repository should always be 0; + * but just in case we play safe. + */ + saved = shared_repository; + shared_repository = 0; + switch (safe_create_leading_directories_const(argv[0])) { + case -3: + errno = EEXIST; + /* fallthru */ + case -1: + die_errno("cannot mkdir %s", argv[0]); + break; + default: + break; + } + shared_repository = saved; + if (mkdir(argv[0], 0777) < 0) + die_errno("cannot mkdir %s", argv[0]); + mkdir_tried = 1; + goto retry; + } + die_errno("cannot chdir to %s", argv[0]); + } + } else if (0 < argc) { + usage(init_db_usage[0]); + } + if (is_bare_repository_cfg == 1) { + static char git_dir[PATH_MAX+1]; + + setenv(GIT_DIR_ENVIRONMENT, + getcwd(git_dir, sizeof(git_dir)), 0); } if (init_shared_repository != -1) diff --git a/builtin-log.c b/builtin-log.c index 0c2fa0ae2d..82236c531b 100644 --- a/builtin-log.c +++ b/builtin-log.c @@ -27,6 +27,10 @@ static int default_show_root = 1; static const char *fmt_patch_subject_prefix = "PATCH"; static const char *fmt_pretty; +static const char * const builtin_log_usage = + "git log [<options>] [<since>..<until>] [[--] <path>...]\n" + " or: git show [options] <object>..."; + static void cmd_log_init(int argc, const char **argv, const char *prefix, struct rev_info *rev) { @@ -61,6 +65,8 @@ static void cmd_log_init(int argc, const char **argv, const char *prefix, rev->show_decorations = 1; } else if (!strcmp(arg, "--source")) { rev->show_source = 1; + } else if (!strcmp(arg, "-h")) { + usage(builtin_log_usage); } else die("unrecognized argument: %s", arg); } @@ -257,7 +263,7 @@ static void show_tagger(char *buf, int len, struct rev_info *rev) pp_user_info("Tagger", rev->commit_format, &out, buf, rev->date_mode, git_log_output_encoding ? git_log_output_encoding: git_commit_encoding); - printf("%s\n", out.buf); + printf("%s", out.buf); strbuf_release(&out); } @@ -329,11 +335,14 @@ int cmd_show(int argc, const char **argv, const char *prefix) case OBJ_TAG: { struct tag *t = (struct tag *)o; + if (rev.shown_one) + putchar('\n'); printf("%stag %s%s\n", diff_get_color_opt(&rev.diffopt, DIFF_COMMIT), t->tag, diff_get_color_opt(&rev.diffopt, DIFF_RESET)); ret = show_object(o->sha1, 1, &rev); + rev.shown_one = 1; if (ret) break; o = parse_object(t->tagged->sha1); @@ -345,12 +354,15 @@ int cmd_show(int argc, const char **argv, const char *prefix) break; } case OBJ_TREE: + if (rev.shown_one) + putchar('\n'); printf("%stree %s%s\n\n", diff_get_color_opt(&rev.diffopt, DIFF_COMMIT), name, diff_get_color_opt(&rev.diffopt, DIFF_RESET)); read_tree_recursive((struct tree *)o, "", 0, 0, NULL, show_tree_object, NULL); + rev.shown_one = 1; break; case OBJ_COMMIT: rev.pending.nr = rev.pending.alloc = 0; @@ -658,6 +670,10 @@ static void make_cover_letter(struct rev_info *rev, int use_stdout, log_write_email_headers(rev, head, &subject_start, &extra_headers, &need_8bit_cte); + for (i = 0; !need_8bit_cte && i < nr; i++) + if (has_non_ascii(list[i]->buffer)) + need_8bit_cte = 1; + msg = body; pp_user_info(NULL, CMIT_FMT_EMAIL, &sb, committer, DATE_RFC2822, encoding); diff --git a/builtin-merge-base.c b/builtin-merge-base.c index a6ec2f7ab7..54e7ec2237 100644 --- a/builtin-merge-base.c +++ b/builtin-merge-base.c @@ -23,7 +23,7 @@ static int show_merge_base(struct commit **rev, int rev_nr, int show_all) } static const char * const merge_base_usage[] = { - "git merge-base [--all] <commit-id> <commit-id>...", + "git merge-base [-a|--all] <commit> <commit>...", NULL }; diff --git a/builtin-merge.c b/builtin-merge.c index 82b546689c..b6b84286b2 100644 --- a/builtin-merge.c +++ b/builtin-merge.c @@ -358,6 +358,7 @@ static void merge_name(const char *remote, struct strbuf *msg) struct strbuf buf = STRBUF_INIT; struct strbuf bname = STRBUF_INIT; const char *ptr; + char *found_ref; int len, early; strbuf_branchname(&bname, remote); @@ -368,14 +369,17 @@ static void merge_name(const char *remote, struct strbuf *msg) if (!remote_head) die("'%s' does not point to a commit", remote); - strbuf_addstr(&buf, "refs/heads/"); - strbuf_addstr(&buf, remote); - resolve_ref(buf.buf, branch_head, 0, NULL); - - if (!hashcmp(remote_head->sha1, branch_head)) { - strbuf_addf(msg, "%s\t\tbranch '%s' of .\n", - sha1_to_hex(branch_head), remote); - goto cleanup; + if (dwim_ref(remote, strlen(remote), branch_head, &found_ref) > 0) { + if (!prefixcmp(found_ref, "refs/heads/")) { + strbuf_addf(msg, "%s\t\tbranch '%s' of .\n", + sha1_to_hex(branch_head), remote); + goto cleanup; + } + if (!prefixcmp(found_ref, "refs/remotes/")) { + strbuf_addf(msg, "%s\t\tremote branch '%s' of .\n", + sha1_to_hex(branch_head), remote); + goto cleanup; + } } /* See if remote matches <name>^^^.. or <name>~<number> */ @@ -594,7 +598,7 @@ static int try_merge_strategy(const char *strategy, struct commit_list *common, discard_cache(); if (read_cache() < 0) die("failed to read the cache"); - return -ret; + return ret; } } diff --git a/builtin-pack-objects.c b/builtin-pack-objects.c index ef4bf6bc14..9cc8a8451d 100644 --- a/builtin-pack-objects.c +++ b/builtin-pack-objects.c @@ -86,7 +86,7 @@ static int pack_compression_level = Z_DEFAULT_COMPRESSION; static int pack_compression_seen; static unsigned long delta_cache_size = 0; -static unsigned long max_delta_cache_size = 0; +static unsigned long max_delta_cache_size = 256 * 1024 * 1024; static unsigned long cache_max_small_delta_size = 1000; static unsigned long window_memory_limit = 0; diff --git a/builtin-prune-packed.c b/builtin-prune-packed.c index 00590b1c3c..be99eb0ac4 100644 --- a/builtin-prune-packed.c +++ b/builtin-prune-packed.c @@ -1,9 +1,12 @@ #include "builtin.h" #include "cache.h" #include "progress.h" +#include "parse-options.h" -static const char prune_packed_usage[] = -"git prune-packed [-n] [-q]"; +static const char * const prune_packed_usage[] = { + "git prune-packed [-n|--dry-run] [-q|--quiet]", + NULL +}; #define DRY_RUN 01 #define VERBOSE 02 @@ -68,24 +71,16 @@ void prune_packed_objects(int opts) int cmd_prune_packed(int argc, const char **argv, const char *prefix) { - int i; int opts = VERBOSE; + const struct option prune_packed_options[] = { + OPT_BIT('n', "dry-run", &opts, "dry run", DRY_RUN), + OPT_NEGBIT('q', "quiet", &opts, "be quiet", VERBOSE), + OPT_END() + }; - for (i = 1; i < argc; i++) { - const char *arg = argv[i]; + argc = parse_options(argc, argv, prefix, prune_packed_options, + prune_packed_usage, 0); - if (*arg == '-') { - if (!strcmp(arg, "-n")) - opts |= DRY_RUN; - else if (!strcmp(arg, "-q")) - opts &= ~VERBOSE; - else - usage(prune_packed_usage); - continue; - } - /* Handle arguments here .. */ - usage(prune_packed_usage); - } prune_packed_objects(opts); return 0; } diff --git a/builtin-push.c b/builtin-push.c index 1d92e22f0a..67f6d96fbe 100644 --- a/builtin-push.c +++ b/builtin-push.c @@ -140,6 +140,7 @@ static int do_push(const char *repo, int flags) struct transport *transport = transport_get(remote, url[i]); int err; + int nonfastforward; if (receivepack) transport_set_option(transport, TRANS_OPT_RECEIVEPACK, receivepack); @@ -148,13 +149,19 @@ static int do_push(const char *repo, int flags) if (flags & TRANSPORT_PUSH_VERBOSE) fprintf(stderr, "Pushing to %s\n", url[i]); - err = transport_push(transport, refspec_nr, refspec, flags); + err = transport_push(transport, refspec_nr, refspec, flags, + &nonfastforward); err |= transport_disconnect(transport); if (!err) continue; error("failed to push some refs to '%s'", url[i]); + if (nonfastforward) { + printf("To prevent you from losing history, non-fast-forward updates were rejected.\n" + "Merge the remote changes before pushing again.\n" + "See 'non-fast forward' section of 'git push --help' for details.\n"); + } errs++; } return !!errs; @@ -168,6 +175,7 @@ int cmd_push(int argc, const char **argv, const char *prefix) const char *repo = NULL; /* default repository */ struct option options[] = { + OPT_BIT('q', "quiet", &flags, "be quiet", TRANSPORT_PUSH_QUIET), OPT_BIT('v', "verbose", &flags, "be verbose", TRANSPORT_PUSH_VERBOSE), OPT_STRING( 0 , "repo", &repo, "repository", "repository"), OPT_BIT( 0 , "all", &flags, "push all refs", TRANSPORT_PUSH_ALL), diff --git a/builtin-read-tree.c b/builtin-read-tree.c index 82e25eaa07..9c2d634d6d 100644 --- a/builtin-read-tree.c +++ b/builtin-read-tree.c @@ -12,6 +12,7 @@ #include "unpack-trees.h" #include "dir.h" #include "builtin.h" +#include "parse-options.h" static int nr_trees; static struct tree *trees[MAX_UNPACK_TREES]; @@ -29,7 +30,39 @@ static int list_tree(unsigned char *sha1) return 0; } -static const char read_tree_usage[] = "git read-tree (<sha> | [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u | -i]] [--exclude-per-directory=<gitignore>] [--index-output=<file>] <sha1> [<sha2> [<sha3>]])"; +static const char * const read_tree_usage[] = { + "git read-tree [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u [--exclude-per-directory=<gitignore>] | -i]] [--index-output=<file>] <tree-ish1> [<tree-ish2> [<tree-ish3>]]", + NULL +}; + +static int index_output_cb(const struct option *opt, const char *arg, + int unset) +{ + set_alternate_index_output(arg); + return 0; +} + +static int exclude_per_directory_cb(const struct option *opt, const char *arg, + int unset) +{ + struct dir_struct *dir; + struct unpack_trees_options *opts; + + opts = (struct unpack_trees_options *)opt->value; + + if (opts->dir) + die("more than one --exclude-per-directory given."); + + dir = xcalloc(1, sizeof(*opts->dir)); + dir->flags |= DIR_SHOW_IGNORED; + dir->exclude_per_dir = arg; + opts->dir = dir; + /* We do not need to nor want to do read-directory + * here; we are merely interested in reusing the + * per directory ignore stack mechanism. + */ + return 0; +} static struct lock_file lock_file; @@ -39,6 +72,34 @@ int cmd_read_tree(int argc, const char **argv, const char *unused_prefix) unsigned char sha1[20]; struct tree_desc t[MAX_UNPACK_TREES]; struct unpack_trees_options opts; + int prefix_set = 0; + const struct option read_tree_options[] = { + { OPTION_CALLBACK, 0, "index-output", NULL, "FILE", + "write resulting index to <FILE>", + PARSE_OPT_NONEG, index_output_cb }, + OPT__VERBOSE(&opts.verbose_update), + OPT_GROUP("Merging"), + OPT_SET_INT('m', NULL, &opts.merge, + "perform a merge in addition to a read", 1), + OPT_SET_INT(0, "trivial", &opts.trivial_merges_only, + "3-way merge if no file level merging required", 1), + OPT_SET_INT(0, "aggressive", &opts.aggressive, + "3-way merge in presence of adds and removes", 1), + OPT_SET_INT(0, "reset", &opts.reset, + "same as -m, but discard unmerged entries", 1), + { OPTION_STRING, 0, "prefix", &opts.prefix, "<subdirectory>/", + "read the tree into the index under <subdirectory>/", + PARSE_OPT_NONEG | PARSE_OPT_LITERAL_ARGHELP }, + OPT_SET_INT('u', NULL, &opts.update, + "update working tree with merge result", 1), + { OPTION_CALLBACK, 0, "exclude-per-directory", &opts, + "gitignore", + "allow explicitly ignored files to be overwritten", + PARSE_OPT_NONEG, exclude_per_directory_cb }, + OPT_SET_INT('i', NULL, &opts.index_only, + "don't check the working tree after merging", 1), + OPT_END() + }; memset(&opts, 0, sizeof(opts)); opts.head_idx = -1; @@ -49,105 +110,19 @@ int cmd_read_tree(int argc, const char **argv, const char *unused_prefix) newfd = hold_locked_index(&lock_file, 1); - for (i = 1; i < argc; i++) { - const char *arg = argv[i]; - - /* "-u" means "update", meaning that a merge will update - * the working tree. - */ - if (!strcmp(arg, "-u")) { - opts.update = 1; - continue; - } - - if (!strcmp(arg, "-v")) { - opts.verbose_update = 1; - continue; - } - - /* "-i" means "index only", meaning that a merge will - * not even look at the working tree. - */ - if (!strcmp(arg, "-i")) { - opts.index_only = 1; - continue; - } - - if (!prefixcmp(arg, "--index-output=")) { - set_alternate_index_output(arg + 15); - continue; - } - - /* "--prefix=<subdirectory>/" means keep the current index - * entries and put the entries from the tree under the - * given subdirectory. - */ - if (!prefixcmp(arg, "--prefix=")) { - if (stage || opts.merge || opts.prefix) - usage(read_tree_usage); - opts.prefix = arg + 9; - opts.merge = 1; - stage = 1; - if (read_cache_unmerged()) - die("you need to resolve your current index first"); - continue; - } - - /* This differs from "-m" in that we'll silently ignore - * unmerged entries and overwrite working tree files that - * correspond to them. - */ - if (!strcmp(arg, "--reset")) { - if (stage || opts.merge || opts.prefix) - usage(read_tree_usage); - opts.reset = 1; - opts.merge = 1; - stage = 1; - read_cache_unmerged(); - continue; - } - - if (!strcmp(arg, "--trivial")) { - opts.trivial_merges_only = 1; - continue; - } - - if (!strcmp(arg, "--aggressive")) { - opts.aggressive = 1; - continue; - } + argc = parse_options(argc, argv, unused_prefix, read_tree_options, + read_tree_usage, 0); - /* "-m" stands for "merge", meaning we start in stage 1 */ - if (!strcmp(arg, "-m")) { - if (stage || opts.merge || opts.prefix) - usage(read_tree_usage); - if (read_cache_unmerged()) - die("you need to resolve your current index first"); - stage = 1; - opts.merge = 1; - continue; - } + if (read_cache_unmerged() && (opts.prefix || opts.merge)) + die("You need to resolve your current index first"); - if (!prefixcmp(arg, "--exclude-per-directory=")) { - struct dir_struct *dir; - - if (opts.dir) - die("more than one --exclude-per-directory are given."); - - dir = xcalloc(1, sizeof(*opts.dir)); - dir->flags |= DIR_SHOW_IGNORED; - dir->exclude_per_dir = arg + 24; - opts.dir = dir; - /* We do not need to nor want to do read-directory - * here; we are merely interested in reusing the - * per directory ignore stack mechanism. - */ - continue; - } + prefix_set = opts.prefix ? 1 : 0; + if (1 < opts.merge + opts.reset + prefix_set) + die("Which one? -m, --reset, or --prefix?"); + stage = opts.merge = (opts.reset || opts.merge || prefix_set); - /* using -u and -i at the same time makes no sense */ - if (1 < opts.index_only + opts.update) - usage(read_tree_usage); + for (i = 0; i < argc; i++) { + const char *arg = argv[i]; if (get_sha1(arg, sha1)) die("Not a valid object name %s", arg); @@ -155,8 +130,11 @@ int cmd_read_tree(int argc, const char **argv, const char *unused_prefix) die("failed to unpack tree object %s", arg); stage++; } + if (1 < opts.index_only + opts.update) + die("-u and -i at the same time makes no sense"); if ((opts.update||opts.index_only) && !opts.merge) - usage(read_tree_usage); + die("%s is meaningless without -m, --reset, or --prefix", + opts.update ? "-u" : "-i"); if ((opts.dir && !opts.update)) die("--exclude-per-directory is meaningless unless -u"); if (opts.merge && !opts.index_only) diff --git a/builtin-receive-pack.c b/builtin-receive-pack.c index 6ec1d056e6..b771fe9b20 100644 --- a/builtin-receive-pack.c +++ b/builtin-receive-pack.c @@ -123,31 +123,6 @@ static struct command *commands; static const char pre_receive_hook[] = "hooks/pre-receive"; static const char post_receive_hook[] = "hooks/post-receive"; -static int run_status(int code, const char *cmd_name) -{ - switch (code) { - case 0: - return 0; - case -ERR_RUN_COMMAND_FORK: - return error("fork of %s failed", cmd_name); - case -ERR_RUN_COMMAND_EXEC: - return error("execute of %s failed", cmd_name); - case -ERR_RUN_COMMAND_PIPE: - return error("pipe failed"); - case -ERR_RUN_COMMAND_WAITPID: - return error("waitpid failed"); - case -ERR_RUN_COMMAND_WAITPID_WRONG_PID: - return error("waitpid is confused"); - case -ERR_RUN_COMMAND_WAITPID_SIGNAL: - return error("%s died of signal", cmd_name); - case -ERR_RUN_COMMAND_WAITPID_NOEXIT: - return error("%s died strangely", cmd_name); - default: - error("%s exited with error code %d", cmd_name, -code); - return -code; - } -} - static int run_receive_hook(const char *hook_name) { static char buf[sizeof(commands->old_sha1) * 2 + PATH_MAX + 4]; @@ -174,7 +149,7 @@ static int run_receive_hook(const char *hook_name) code = start_command(&proc); if (code) - return run_status(code, hook_name); + return code; for (cmd = commands; cmd; cmd = cmd->next) { if (!cmd->error_string) { size_t n = snprintf(buf, sizeof(buf), "%s %s %s\n", @@ -186,7 +161,7 @@ static int run_receive_hook(const char *hook_name) } } close(proc.in); - return run_status(finish_command(&proc), hook_name); + return finish_command(&proc); } static int run_update_hook(struct command *cmd) @@ -203,9 +178,8 @@ static int run_update_hook(struct command *cmd) argv[3] = sha1_to_hex(cmd->new_sha1); argv[4] = NULL; - return run_status(run_command_v_opt(argv, RUN_COMMAND_NO_STDIN | - RUN_COMMAND_STDOUT_TO_STDERR), - update_hook); + return run_command_v_opt(argv, RUN_COMMAND_NO_STDIN | + RUN_COMMAND_STDOUT_TO_STDERR); } static int is_ref_checked_out(const char *ref) @@ -419,7 +393,6 @@ static void run_update_post_hook(struct command *cmd) argv[argc] = NULL; status = run_command_v_opt(argv, RUN_COMMAND_NO_STDIN | RUN_COMMAND_STDOUT_TO_STDERR); - run_status(status, update_post_hook); } static void execute_commands(const char *unpacker_error) @@ -537,7 +510,6 @@ static const char *unpack(void) code = run_command_v_opt(unpacker, RUN_GIT_CMD); if (!code) return NULL; - run_status(code, unpacker[0]); return "unpack-objects abnormal exit"; } else { const char *keeper[7]; @@ -563,7 +535,6 @@ static const char *unpack(void) ip.git_cmd = 1; status = start_command(&ip); if (status) { - run_status(status, keeper[0]); return "index-pack fork failed"; } pack_lockfile = index_pack_lockfile(ip.out); @@ -573,7 +544,6 @@ static const char *unpack(void) reprepare_packed_git(); return NULL; } - run_status(status, keeper[0]); return "index-pack abnormal exit"; } } diff --git a/builtin-reflog.c b/builtin-reflog.c index ddfdf5a3cb..95198c5de4 100644 --- a/builtin-reflog.c +++ b/builtin-reflog.c @@ -694,7 +694,7 @@ static int cmd_reflog_delete(int argc, const char **argv, const char *prefix) */ static const char reflog_usage[] = -"git reflog (expire | ...)"; +"git reflog [ show | expire | delete ]"; int cmd_reflog(int argc, const char **argv, const char *prefix) { diff --git a/builtin-send-pack.c b/builtin-send-pack.c index 47fb9f7baa..37e528e283 100644 --- a/builtin-send-pack.c +++ b/builtin-send-pack.c @@ -44,6 +44,7 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext NULL, NULL, NULL, + NULL, }; struct child_process po; int i; @@ -53,6 +54,8 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext argv[i++] = "--thin"; if (args->use_ofs_delta) argv[i++] = "--delta-base-offset"; + if (args->quiet) + argv[i++] = "-q"; memset(&po, 0, sizeof(po)); po.argv = argv; po.in = -1; diff --git a/builtin-show-branch.c b/builtin-show-branch.c index 01bea3b583..3510a86e38 100644 --- a/builtin-show-branch.c +++ b/builtin-show-branch.c @@ -6,8 +6,8 @@ #include "parse-options.h" static const char* show_branch_usage[] = { - "git show-branch [--sparse] [--current] [--all] [--remotes] [--topo-order] [--more=count | --list | --independent | --merge-base] [--topics] [--color] [<refs>...]", - "--reflog[=n[,b]] [--list] [--color] <branch>", + "git show-branch [-a|--all] [-r|--remotes] [--topo-order | --date-order] [--current] [--color | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]...", + "git show-branch (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>]", NULL }; @@ -665,7 +665,7 @@ int cmd_show_branch(int ac, const char **av, const char *prefix) OPT_BOOLEAN(0, "sha1-name", &sha1_name, "name commits with their object names"), OPT_BOOLEAN(0, "merge-base", &merge_base, - "act like git merge-base -a"), + "show possible merge bases"), OPT_BOOLEAN(0, "independent", &independent, "show refs unreachable from any other ref"), OPT_BOOLEAN(0, "topo-order", &lifo, diff --git a/builtin-verify-pack.c b/builtin-verify-pack.c index 0ee0a9af60..b5bd28e959 100644 --- a/builtin-verify-pack.c +++ b/builtin-verify-pack.c @@ -2,15 +2,19 @@ #include "cache.h" #include "pack.h" #include "pack-revindex.h" +#include "parse-options.h" #define MAX_CHAIN 50 static void show_pack_info(struct packed_git *p) { - uint32_t nr_objects, i, chain_histogram[MAX_CHAIN+1]; + uint32_t nr_objects, i; + int cnt; + unsigned long chain_histogram[MAX_CHAIN+1], baseobjects; nr_objects = p->num_objects; memset(chain_histogram, 0, sizeof(chain_histogram)); + baseobjects = 0; for (i = 0; i < nr_objects; i++) { const unsigned char *sha1; @@ -29,9 +33,11 @@ static void show_pack_info(struct packed_git *p) &delta_chain_length, base_sha1); printf("%s ", sha1_to_hex(sha1)); - if (!delta_chain_length) + if (!delta_chain_length) { printf("%-6s %lu %lu %"PRIuMAX"\n", type, size, store_size, (uintmax_t)offset); + baseobjects++; + } else { printf("%-6s %lu %lu %"PRIuMAX" %u %s\n", type, size, store_size, (uintmax_t)offset, @@ -43,15 +49,21 @@ static void show_pack_info(struct packed_git *p) } } - for (i = 0; i <= MAX_CHAIN; i++) { - if (!chain_histogram[i]) + if (baseobjects) + printf("non delta: %lu object%s\n", + baseobjects, baseobjects > 1 ? "s" : ""); + + for (cnt = 1; cnt <= MAX_CHAIN; cnt++) { + if (!chain_histogram[cnt]) continue; - printf("chain length = %"PRIu32": %"PRIu32" object%s\n", i, - chain_histogram[i], chain_histogram[i] > 1 ? "s" : ""); + printf("chain length = %d: %lu object%s\n", cnt, + chain_histogram[cnt], + chain_histogram[cnt] > 1 ? "s" : ""); } if (chain_histogram[0]) - printf("chain length > %d: %"PRIu32" object%s\n", MAX_CHAIN, - chain_histogram[0], chain_histogram[0] > 1 ? "s" : ""); + printf("chain length > %d: %lu object%s\n", MAX_CHAIN, + chain_histogram[0], + chain_histogram[0] > 1 ? "s" : ""); } static int verify_one_pack(const char *path, int verbose) @@ -107,36 +119,31 @@ static int verify_one_pack(const char *path, int verbose) return err; } -static const char verify_pack_usage[] = "git verify-pack [-v] <pack>..."; +static const char * const verify_pack_usage[] = { + "git verify-pack [-v|--verbose] <pack>...", + NULL +}; int cmd_verify_pack(int argc, const char **argv, const char *prefix) { int err = 0; int verbose = 0; - int no_more_options = 0; - int nothing_done = 1; + int i; + const struct option verify_pack_options[] = { + OPT__VERBOSE(&verbose), + OPT_END() + }; git_config(git_default_config, NULL); - while (1 < argc) { - if (!no_more_options && argv[1][0] == '-') { - if (!strcmp("-v", argv[1])) - verbose = 1; - else if (!strcmp("--", argv[1])) - no_more_options = 1; - else - usage(verify_pack_usage); - } - else { - if (verify_one_pack(argv[1], verbose)) - err = 1; - discard_revindex(); - nothing_done = 0; - } - argc--; argv++; + argc = parse_options(argc, argv, prefix, verify_pack_options, + verify_pack_usage, 0); + if (argc < 1) + usage_with_options(verify_pack_usage, verify_pack_options); + for (i = 0; i < argc; i++) { + if (verify_one_pack(argv[i], verbose)) + err = 1; + discard_revindex(); } - if (nothing_done) - usage(verify_pack_usage); - return err; } diff --git a/builtin-verify-tag.c b/builtin-verify-tag.c index 7f7fda42f9..9f482c29f5 100644 --- a/builtin-verify-tag.c +++ b/builtin-verify-tag.c @@ -10,9 +10,12 @@ #include "tag.h" #include "run-command.h" #include <signal.h> +#include "parse-options.h" -static const char builtin_verify_tag_usage[] = - "git verify-tag [-v|--verbose] <tag>..."; +static const char * const verify_tag_usage[] = { + "git verify-tag [-v|--verbose] <tag>...", + NULL +}; #define PGP_SIGNATURE "-----BEGIN PGP SIGNATURE-----" @@ -89,17 +92,17 @@ static int verify_tag(const char *name, int verbose) int cmd_verify_tag(int argc, const char **argv, const char *prefix) { int i = 1, verbose = 0, had_error = 0; + const struct option verify_tag_options[] = { + OPT__VERBOSE(&verbose), + OPT_END() + }; git_config(git_default_config, NULL); - if (argc > 1 && - (!strcmp(argv[i], "-v") || !strcmp(argv[i], "--verbose"))) { - verbose = 1; - i++; - } - + argc = parse_options(argc, argv, prefix, verify_tag_options, + verify_tag_usage, PARSE_OPT_KEEP_ARGV0); if (argc <= i) - usage(builtin_verify_tag_usage); + usage_with_options(verify_tag_usage, verify_tag_options); /* sometimes the program was terminated because this signal * was received in the process of writing the gpg input: */ diff --git a/builtin-write-tree.c b/builtin-write-tree.c index 3a24ce8157..b223af416f 100644 --- a/builtin-write-tree.c +++ b/builtin-write-tree.c @@ -7,9 +7,12 @@ #include "cache.h" #include "tree.h" #include "cache-tree.h" +#include "parse-options.h" -static const char write_tree_usage[] = -"git write-tree [--missing-ok] [--prefix=<prefix>/]"; +static const char * const write_tree_usage[] = { + "git write-tree [--missing-ok] [--prefix=<prefix>/]", + NULL +}; int cmd_write_tree(int argc, const char **argv, const char *unused_prefix) { @@ -17,27 +20,22 @@ int cmd_write_tree(int argc, const char **argv, const char *unused_prefix) const char *prefix = NULL; unsigned char sha1[20]; const char *me = "git-write-tree"; + struct option write_tree_options[] = { + OPT_BIT(0, "missing-ok", &flags, "allow missing objects", + WRITE_TREE_MISSING_OK), + { OPTION_STRING, 0, "prefix", &prefix, "<prefix>/", + "write tree object for a subdirectory <prefix>" , + PARSE_OPT_LITERAL_ARGHELP }, + { OPTION_BIT, 0, "ignore-cache-tree", &flags, NULL, + "only useful for debugging", + PARSE_OPT_HIDDEN | PARSE_OPT_NOARG, NULL, + WRITE_TREE_IGNORE_CACHE_TREE }, + OPT_END() + }; git_config(git_default_config, NULL); - while (1 < argc) { - const char *arg = argv[1]; - if (!strcmp(arg, "--missing-ok")) - flags |= WRITE_TREE_MISSING_OK; - else if (!prefixcmp(arg, "--prefix=")) - prefix = arg + 9; - else if (!prefixcmp(arg, "--ignore-cache-tree")) - /* - * This is only useful for debugging, so I - * do not bother documenting it. - */ - flags |= WRITE_TREE_IGNORE_CACHE_TREE; - else - usage(write_tree_usage); - argc--; argv++; - } - - if (argc > 2) - die("too many options"); + argc = parse_options(argc, argv, unused_prefix, write_tree_options, + write_tree_usage, 0); ret = write_cache_as_tree(sha1, flags, prefix); switch (ret) { @@ -468,6 +468,9 @@ extern int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_obje extern int index_path(unsigned char *sha1, const char *path, struct stat *st, int write_object); extern void fill_stat_cache_info(struct cache_entry *ce, struct stat *st); +/* "careful lstat()" */ +extern int check_path(const char *path, int len, struct stat *st); + #define REFRESH_REALLY 0x0001 /* ignore_valid */ #define REFRESH_UNMERGED 0x0002 /* allow unmerged */ #define REFRESH_QUIET 0x0004 /* be quiet about it */ @@ -64,6 +64,7 @@ enum cmit_fmt { }; extern int non_ascii(int); +extern int has_non_ascii(const char *text); struct rev_info; /* in revision.h, it circularly uses enum cmit_fmt */ extern char *reencode_commit_message(const struct commit *commit, const char **encoding_p); diff --git a/compat/mingw.h b/compat/mingw.h index c1859c5480..948de66eb5 100644 --- a/compat/mingw.h +++ b/compat/mingw.h @@ -17,9 +17,10 @@ typedef int pid_t; #define S_IROTH 0 #define S_IXOTH 0 -#define WIFEXITED(x) ((unsigned)(x) < 259) /* STILL_ACTIVE */ +#define WIFEXITED(x) 1 +#define WIFSIGNALED(x) 0 #define WEXITSTATUS(x) ((x) & 0xff) -#define WIFSIGNALED(x) ((unsigned)(x) > 259) +#define WTERMSIG(x) SIGTERM #define SIGHUP 1 #define SIGQUIT 3 @@ -62,7 +62,8 @@ static char *parse_value(void) if (comment) continue; if (isspace(c) && !quote) { - space = 1; + if (len) + space++; continue; } if (!quote) { @@ -71,11 +72,8 @@ static char *parse_value(void) continue; } } - if (space) { - if (len) - value[len++] = ' '; - space = 0; - } + for (; space; space--) + value[len++] = ' '; if (c == '\\') { c = get_next_char(); switch (c) { diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 745b5fb78b..5543dc4d14 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1047,6 +1047,7 @@ _git_grep () --extended-regexp --basic-regexp --fixed-strings --files-with-matches --name-only --files-without-match + --max-depth --count --and --or --not --all-match " diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index eace9c18eb..8c70ad8b7f 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -429,16 +429,19 @@ Each entry is a cons of (SHORT-NAME . FULL-NAME)." (git-get-string-sha1 (git-call-process-string-display-error "write-tree")))) -(defun git-commit-tree (buffer tree head) - "Call git-commit-tree with buffer as input and return the resulting commit SHA1." +(defun git-commit-tree (buffer tree parent) + "Create a commit and possibly update HEAD. +Create a commit with the message in BUFFER using the tree with hash TREE. +Use PARENT as the parent of the new commit. If PARENT is the current \"HEAD\", +update the \"HEAD\" reference to the new commit." (let ((author-name (git-get-committer-name)) (author-email (git-get-committer-email)) (subject "commit (initial): ") author-date log-start log-end args coding-system-for-write) - (when head + (when parent (setq subject "commit: ") (push "-p" args) - (push head args)) + (push parent args)) (with-current-buffer buffer (goto-char (point-min)) (if @@ -474,7 +477,7 @@ Each entry is a cons of (SHORT-NAME . FULL-NAME)." (apply #'git-run-command-region buffer log-start log-end env "commit-tree" tree (nreverse args)))))) - (when commit (git-update-ref "HEAD" commit head subject)) + (when commit (git-update-ref "HEAD" commit parent subject)) commit))) (defun git-empty-db-p () diff --git a/contrib/hg-to-git/hg-to-git.py b/contrib/hg-to-git/hg-to-git.py index 7b03204ed1..2a6839d81e 100755 --- a/contrib/hg-to-git/hg-to-git.py +++ b/contrib/hg-to-git/hg-to-git.py @@ -20,7 +20,7 @@ """ import os, os.path, sys -import tempfile, popen2, pickle, getopt +import tempfile, pickle, getopt import re # Maps hg version -> git version @@ -267,7 +267,7 @@ static int filter_buffer(int fd, void *data) status = finish_command(&child_process); if (status) - error("external filter %s failed %d", params->cmd, -status); + error("external filter %s failed %d", params->cmd, status); return (write_err || status); } @@ -861,12 +861,20 @@ int is_empty_dir(const char *path) return ret; } -int remove_dir_recursively(struct strbuf *path, int only_empty) +int remove_dir_recursively(struct strbuf *path, int flag) { - DIR *dir = opendir(path->buf); + DIR *dir; struct dirent *e; int ret = 0, original_len = path->len, len; + int only_empty = (flag & REMOVE_DIR_EMPTY_ONLY); + unsigned char submodule_head[20]; + if ((flag & REMOVE_DIR_KEEP_NESTED_GIT) && + !resolve_gitlink_ref(path->buf, "HEAD", submodule_head)) + /* Do not descend and nuke a nested git work tree. */ + return 0; + + dir = opendir(path->buf); if (!dir) return -1; if (path->buf[original_len - 1] != '/') @@ -88,7 +88,10 @@ static inline int is_dot_or_dotdot(const char *name) extern int is_empty_dir(const char *dir); extern void setup_standard_excludes(struct dir_struct *dir); -extern int remove_dir_recursively(struct strbuf *path, int only_empty); + +#define REMOVE_DIR_EMPTY_ONLY 01 +#define REMOVE_DIR_KEEP_NESTED_GIT 02 +extern int remove_dir_recursively(struct strbuf *path, int flag); /* tries to remove the path with empty directories along it, ignores ENOENT */ extern int remove_path(const char *path); @@ -175,6 +175,19 @@ static int write_entry(struct cache_entry *ce, char *path, const struct checkout return 0; } +/* + * This is like 'lstat()', except it refuses to follow symlinks + * in the path. + */ +int check_path(const char *path, int len, struct stat *st) +{ + if (has_symlink_leading_path(path, len)) { + errno = ENOENT; + return -1; + } + return lstat(path, st); +} + int checkout_entry(struct cache_entry *ce, const struct checkout *state, char *topath) { static char path[PATH_MAX + 1]; @@ -188,7 +201,7 @@ int checkout_entry(struct cache_entry *ce, const struct checkout *state, char *t strcpy(path + len, ce->name); len += ce_namelen(ce); - if (!lstat(path, &st)) { + if (!check_path(path, len, &st)) { unsigned changed = ce_match_stat(ce, &st, CE_MATCH_IGNORE_VALID); if (!changed) return 0; diff --git a/git-add--interactive.perl b/git-add--interactive.perl index df9f231635..06f70602cc 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -841,6 +841,10 @@ sub coalesce_overlapping_hunks { my ($last_o_ctx, $last_was_dirty); for (grep { $_->{USE} } @in) { + if ($_->{TYPE} ne 'hunk') { + push @out, $_; + next; + } my $text = $_->{TEXT}; my ($o_ofs) = parse_hunk_header($text->[0]); if (defined $last_o_ctx && @@ -191,6 +191,20 @@ check_patch_format () { esac ;; esac + if test -z "$patch_format" && + test -n "$l1" && + test -n "$l2" && + test -n "$l3" + then + # This begins with three non-empty lines. Is this a + # piece of e-mail a-la RFC2822? Grab all the headers, + # discarding the indented remainder of folded lines, + # and see if it looks like that they all begin with the + # header field names... + sed -n -e '/^$/q' -e '/^[ ]/d' -e p "$1" | + egrep -v '^[A-Za-z]+(-[A-Za-z]+)*:' >/dev/null || + patch_format=mbox + fi } < "$1" || clean_abort } @@ -260,7 +274,11 @@ split_patches () { msgnum= ;; *) - clean_abort "Patch format $patch_format is not supported." + if test -n "$parse_patch" ; then + clean_abort "Patch format $patch_format is not supported." + else + clean_abort "Patch format detection failed." + fi ;; esac } diff --git a/git-compat-util.h b/git-compat-util.h index 9f941e42b1..71b5acb6fa 100644 --- a/git-compat-util.h +++ b/git-compat-util.h @@ -57,10 +57,8 @@ # endif #elif !defined(__APPLE__) && !defined(__FreeBSD__) && !defined(__USLC__) && !defined(_M_UNIX) && !defined(sgi) #define _XOPEN_SOURCE 600 /* glibc2 and AIX 5.3L need 500, OpenBSD needs 600 for S_ISLNK() */ -#ifndef __sun__ #define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */ #endif -#endif #define _ALL_SOURCE 1 #define _GNU_SOURCE 1 #define _BSD_SOURCE 1 diff --git a/git-cvsimport.perl b/git-cvsimport.perl index e439202961..593832d813 100755 --- a/git-cvsimport.perl +++ b/git-cvsimport.perl @@ -252,7 +252,8 @@ sub conn { } }; } - $pass="A" unless $pass; + + $pass = $self->_scramble($pass); my ($s, $rep); if ($proxyhost) { @@ -484,6 +485,42 @@ sub _fetchfile { return $res; } +sub _scramble { + my ($self, $pass) = @_; + my $scrambled = "A"; + + return $scrambled unless $pass; + + my $pass_len = length($pass); + my @pass_arr = split("", $pass); + my $i; + + # from cvs/src/scramble.c + my @shifts = ( + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 114,120, 53, 79, 96,109, 72,108, 70, 64, 76, 67,116, 74, 68, 87, + 111, 52, 75,119, 49, 34, 82, 81, 95, 65,112, 86,118,110,122,105, + 41, 57, 83, 43, 46,102, 40, 89, 38,103, 45, 50, 42,123, 91, 35, + 125, 55, 54, 66,124,126, 59, 47, 92, 71,115, 78, 88,107,106, 56, + 36,121,117,104,101,100, 69, 73, 99, 63, 94, 93, 39, 37, 61, 48, + 58,113, 32, 90, 44, 98, 60, 51, 33, 97, 62, 77, 84, 80, 85,223, + 225,216,187,166,229,189,222,188,141,249,148,200,184,136,248,190, + 199,170,181,204,138,232,218,183,255,234,220,247,213,203,226,193, + 174,172,228,252,217,201,131,230,197,211,145,238,161,179,160,212, + 207,221,254,173,202,146,224,151,140,196,205,130,135,133,143,246, + 192,159,244,239,185,168,215,144,139,165,180,157,147,186,214,176, + 227,231,219,169,175,156,206,198,129,164,150,210,154,177,134,127, + 182,128,158,208,162,132,167,209,149,241,153,251,237,236,171,195, + 243,233,253,240,194,250,191,155,142,137,245,235,163,242,178,152 + ); + + for ($i = 0; $i < $pass_len; $i++) { + $scrambled .= pack("C", $shifts[ord($pass_arr[$i])]); + } + + return $scrambled; +} package main; diff --git a/git-filter-branch.sh b/git-filter-branch.sh index 37e044db40..a480d6fc70 100755 --- a/git-filter-branch.sh +++ b/git-filter-branch.sh @@ -97,12 +97,12 @@ set_ident () { echo "case \"\$GIT_${uid}_NAME\" in \"\") GIT_${uid}_NAME=\"\${GIT_${uid}_EMAIL%%@*}\" && export GIT_${uid}_NAME;; esac" } -USAGE="[--env-filter <command>] [--tree-filter <command>] \ -[--index-filter <command>] [--parent-filter <command>] \ -[--msg-filter <command>] [--commit-filter <command>] \ -[--tag-name-filter <command>] [--subdirectory-filter <directory>] \ -[--original <namespace>] [-d <directory>] [-f | --force] \ -[<rev-list options>...]" +USAGE="[--env-filter <command>] [--tree-filter <command>] + [--index-filter <command>] [--parent-filter <command>] + [--msg-filter <command>] [--commit-filter <command>] + [--tag-name-filter <command>] [--subdirectory-filter <directory>] + [--original <namespace>] [-d <directory>] [-f | --force] + [<rev-list options>...]" OPTIONS_SPEC= . git-sh-setup diff --git a/git-instaweb.sh b/git-instaweb.sh index 32f6496b0d..5f5cac75ea 100755 --- a/git-instaweb.sh +++ b/git-instaweb.sh @@ -278,7 +278,7 @@ EOF # check to see if Dennis Stosberg's mod_perl compatibility patch # (<20060621130708.Gcbc6e5c@leonov.stosberg.net>) has been applied - if test -f "$module_path/mod_perl.so" && grep '^our $gitbin' \ + if test -f "$module_path/mod_perl.so" && grep 'MOD_PERL' \ "$GIT_DIR/gitweb/gitweb.cgi" >/dev/null then # favor mod_perl if available diff --git a/git-pull.sh b/git-pull.sh index 4b78a0cd37..0bbd5bf7df 100755 --- a/git-pull.sh +++ b/git-pull.sh @@ -119,15 +119,31 @@ error_on_no_merge_candidates () { } test true = "$rebase" && { - git update-index --ignore-submodules --refresh && - git diff-files --ignore-submodules --quiet && - git diff-index --ignore-submodules --cached --quiet HEAD -- || - die "refusing to pull with rebase: your working tree is not up-to-date" - + if ! git rev-parse -q --verify HEAD >/dev/null + then + # On an unborn branch + if test -f "$GIT_DIR/index" + then + die "updating an unborn branch with changes added to the index" + fi + else + git update-index --ignore-submodules --refresh && + git diff-files --ignore-submodules --quiet && + git diff-index --ignore-submodules --cached --quiet HEAD -- || + die "refusing to pull with rebase: your working tree is not up-to-date" + fi + oldremoteref= && . git-parse-remote && - reflist="$(get_remote_merge_branch "$@" 2>/dev/null)" && - oldremoteref="$(git rev-parse -q --verify \ - "$reflist")" + remoteref="$(get_remote_merge_branch "$@" 2>/dev/null)" && + oldremoteref="$(git rev-parse -q --verify "$remoteref")" && + for reflog in $(git rev-list -g $remoteref 2>/dev/null) + do + if test "$reflog" = "$(git merge-base $reflog $curr_branch)" + then + oldremoteref="$reflog" + break + fi + done } orig_head=$(git rev-parse -q --verify HEAD) git fetch $verbosity --update-head-ok "$@" || exit 1 diff --git a/git-rebase.sh b/git-rebase.sh index 18bc6946cf..3555d17a5d 100755 --- a/git-rebase.sh +++ b/git-rebase.sh @@ -382,8 +382,10 @@ else fi # The tree must be really really clean. -if ! git update-index --ignore-submodules --refresh; then - die "cannot rebase: you have unstaged changes" +if ! git update-index --ignore-submodules --refresh > /dev/null; then + echo >&2 "cannot rebase: you have unstaged changes" + git diff --name-status -r --ignore-submodules -- >&2 + exit 1 fi diff=$(git diff-index --cached --name-status -r --ignore-submodules HEAD --) case "$diff" in diff --git a/git-send-email.perl b/git-send-email.perl index d508f83349..0700d80afc 100755 --- a/git-send-email.perl +++ b/git-send-email.perl @@ -450,7 +450,6 @@ sub check_file_rev_conflict($) { try { $repo->command('rev-parse', '--verify', '--quiet', $f); if (defined($format_patch)) { - print "foo\n"; return $format_patch; } die(<<EOF); diff --git a/git-svn.perl b/git-svn.perl index d075810724..ce4fef9d34 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -21,6 +21,15 @@ $Git::SVN::default_ref_id = $ENV{GIT_SVN_ID} || 'git-svn'; $Git::SVN::Ra::_log_window_size = 100; $Git::SVN::_minimize_url = 'unset'; +if (! exists $ENV{SVN_SSH}) { + if (exists $ENV{GIT_SSH}) { + $ENV{SVN_SSH} = $ENV{GIT_SSH}; + if ($^O eq 'msys') { + $ENV{SVN_SSH} =~ s/\\/\\\\/g; + } + } +} + $Git::SVN::Log::TZ = $ENV{TZ}; $ENV{TZ} = 'UTC'; $| = 1; # unbuffer STDOUT @@ -764,6 +773,7 @@ sub cmd_show_ignore { print STDOUT "\n# $path\n"; my $s = $props->{'svn:ignore'} or return; $s =~ s/[\r\n]+/\n/g; + $s =~ s/^\n+//; chomp $s; $s =~ s#^#$path#gm; print STDOUT "$s\n"; @@ -801,6 +811,7 @@ sub cmd_create_ignore { open(GITIGNORE, '>', $ignore) or fatal("Failed to open `$ignore' for writing: $!"); $s =~ s/[\r\n]+/\n/g; + $s =~ s/^\n+//; chomp $s; # Prefix all patterns so that the ignore doesn't apply # to sub-directories. @@ -907,7 +918,7 @@ sub cmd_multi_init { } do_git_init_db(); if (defined $_trunk) { - my $trunk_ref = $_prefix . 'trunk'; + my $trunk_ref = 'refs/remotes/' . $_prefix . 'trunk'; # try both old-style and new-style lookups: my $gs_trunk = eval { Git::SVN->new($trunk_ref) }; unless ($gs_trunk) { @@ -1154,6 +1165,17 @@ sub post_fetch_checkout { my $gs = $Git::SVN::_head or return; return if verify_ref('refs/heads/master^0'); + # look for "trunk" ref if it exists + my $remote = Git::SVN::read_all_remotes()->{$gs->{repo_id}}; + my $fetch = $remote->{fetch}; + if ($fetch) { + foreach my $p (keys %$fetch) { + basename($fetch->{$p}) eq 'trunk' or next; + $gs = Git::SVN->new($fetch->{$p}, $gs->{repo_id}, $p); + last; + } + } + my $valid_head = verify_ref('HEAD^0'); command_noisy(qw(update-ref refs/heads/master), $gs->refname); return if ($valid_head || !verify_ref('HEAD^0')); @@ -1209,6 +1231,7 @@ sub complete_url_ls_init { } command_oneline('config', $k, $gs->{url}) unless $orig_url; my $remote_path = "$gs->{path}/$repo_path"; + $remote_path =~ s{%([0-9A-F]{2})}{chr hex($1)}ieg; $remote_path =~ s#/+#/#g; $remote_path =~ s#^/##g; $remote_path .= "/*" if $remote_path !~ /\*/; @@ -1641,23 +1664,23 @@ sub resolve_local_globs { return unless defined $glob_spec; my $ref = $glob_spec->{ref}; my $path = $glob_spec->{path}; - foreach (command(qw#for-each-ref --format=%(refname) refs/remotes#)) { - next unless m#^refs/remotes/$ref->{regex}$#; + foreach (command(qw#for-each-ref --format=%(refname) refs/#)) { + next unless m#^$ref->{regex}$#; my $p = $1; my $pathname = desanitize_refname($path->full_path($p)); my $refname = desanitize_refname($ref->full_path($p)); if (my $existing = $fetch->{$pathname}) { if ($existing ne $refname) { die "Refspec conflict:\n", - "existing: refs/remotes/$existing\n", - " globbed: refs/remotes/$refname\n"; + "existing: $existing\n", + " globbed: $refname\n"; } - my $u = (::cmt_metadata("refs/remotes/$refname"))[0]; + my $u = (::cmt_metadata("$refname"))[0]; $u =~ s!^\Q$url\E(/|$)!! or die - "refs/remotes/$refname: '$url' not found in '$u'\n"; + "$refname: '$url' not found in '$u'\n"; if ($pathname ne $u) { warn "W: Refspec glob conflict ", - "(ref: refs/remotes/$refname):\n", + "(ref: $refname):\n", "expected path: $pathname\n", " real path: $u\n", "Continuing ahead with $u\n"; @@ -1735,33 +1758,35 @@ sub read_all_remotes { my $use_svm_props = eval { command_oneline(qw/config --bool svn.useSvmProps/) }; $use_svm_props = $use_svm_props eq 'true' if $use_svm_props; + my $svn_refspec = qr{\s*/?(.*?)\s*:\s*(.+?)\s*}; foreach (grep { s/^svn-remote\.// } command(qw/config -l/)) { - if (m!^(.+)\.fetch=\s*(.*)\s*:\s*(.+)\s*$!) { - my ($remote, $local_ref, $_remote_ref) = ($1, $2, $3); - die("svn-remote.$remote: remote ref '$_remote_ref' " - . "must start with 'refs/remotes/'\n") - unless $_remote_ref =~ m{^refs/remotes/(.+)}; - my $remote_ref = $1; - $local_ref =~ s{^/}{}; + if (m!^(.+)\.fetch=$svn_refspec$!) { + my ($remote, $local_ref, $remote_ref) = ($1, $2, $3); + die("svn-remote.$remote: remote ref '$remote_ref' " + . "must start with 'refs/'\n") + unless $remote_ref =~ m{^refs/}; $r->{$remote}->{fetch}->{$local_ref} = $remote_ref; $r->{$remote}->{svm} = {} if $use_svm_props; } elsif (m!^(.+)\.usesvmprops=\s*(.*)\s*$!) { $r->{$1}->{svm} = {}; } elsif (m!^(.+)\.url=\s*(.*)\s*$!) { $r->{$1}->{url} = $2; - } elsif (m!^(.+)\.(branches|tags)= - (.*):refs/remotes/(.+)\s*$/!x) { - my ($p, $g) = ($3, $4); + } elsif (m!^(.+)\.(branches|tags)=$svn_refspec$!) { + my ($remote, $t, $local_ref, $remote_ref) = + ($1, $2, $3, $4); + die("svn-remote.$remote: remote ref '$remote_ref' ($t) " + . "must start with 'refs/'\n") + unless $remote_ref =~ m{^refs/}; my $rs = { - t => $2, - remote => $1, - path => Git::SVN::GlobSpec->new($p), - ref => Git::SVN::GlobSpec->new($g) }; + t => $t, + remote => $remote, + path => Git::SVN::GlobSpec->new($local_ref), + ref => Git::SVN::GlobSpec->new($remote_ref) }; if (length($rs->{ref}->{right}) != 0) { die "The '*' glob character must be the last ", - "character of '$g'\n"; + "character of '$remote_ref'\n"; } - push @{ $r->{$1}->{$2} }, $rs; + push @{ $r->{$remote}->{$t} }, $rs; } } @@ -1869,14 +1894,15 @@ sub init_remote_config { } } my ($xrepo_id, $xpath) = find_ref($self->refname); - if (defined $xpath) { + if (!$no_write && defined $xpath) { die "svn-remote.$xrepo_id.fetch already set to track ", - "$xpath:refs/remotes/", $self->refname, "\n"; + "$xpath:", $self->refname, "\n"; } unless ($no_write) { command_noisy('config', "svn-remote.$self->{repo_id}.url", $url); $self->{path} =~ s{^/}{}; + $self->{path} =~ s{%([0-9A-F]{2})}{chr hex($1)}ieg; command_noisy('config', '--add', "svn-remote.$self->{repo_id}.fetch", "$self->{path}:".$self->refname); @@ -1946,7 +1972,7 @@ sub find_ref { my ($ref_id) = @_; foreach (command(qw/config -l/)) { next unless m!^svn-remote\.(.+)\.fetch= - \s*(.*)\s*:\s*refs/remotes/(.+)\s*$!x; + \s*/?(.*?)\s*:\s*(.+?)\s*$!x; my ($repo_id, $path, $ref) = ($1, $2, $3); if ($ref eq $ref_id) { $path = '' if ($path =~ m#^\./?#); @@ -1963,16 +1989,16 @@ sub new { if (!defined $repo_id) { die "Could not find a \"svn-remote.*.fetch\" key ", "in the repository configuration matching: ", - "refs/remotes/$ref_id\n"; + "$ref_id\n"; } } my $self = _new($class, $repo_id, $ref_id, $path); if (!defined $self->{path} || !length $self->{path}) { my $fetch = command_oneline('config', '--get', "svn-remote.$repo_id.fetch", - ":refs/remotes/$ref_id\$") or + ":$ref_id\$") or die "Failed to read \"svn-remote.$repo_id.fetch\" ", - "\":refs/remotes/$ref_id\$\" in config\n"; + "\":$ref_id\$\" in config\n"; ($self->{path}, undef) = split(/\s*:\s*/, $fetch); } $self->{url} = command_oneline('config', '--get', @@ -1983,7 +2009,7 @@ sub new { } sub refname { - my ($refname) = "refs/remotes/$_[0]->{ref_id}" ; + my ($refname) = $_[0]->{ref_id} ; # It cannot end with a slash /, we'll throw up on this because # SVN can't have directories with a slash in their name, either: @@ -3262,7 +3288,7 @@ sub _rev_map_get { my $i = int(($l/24 + $u/24) / 2) * 24; sysseek($fh, $i, SEEK_SET) or croak "seek: $!"; sysread($fh, my $buf, 24) == 24 or croak "read: $!"; - my ($r, $c) = unpack('NH40', $buf); + my ($r, $c) = unpack(rev_map_fmt, $buf); if ($r < $rev) { $l = $i + 24; @@ -3317,12 +3343,24 @@ sub _new { $repo_id = $Git::SVN::default_repo_id; } unless (defined $ref_id && length $ref_id) { - $_[2] = $ref_id = $Git::SVN::default_ref_id; + $_prefix = '' unless defined($_prefix); + $_[2] = $ref_id = + "refs/remotes/$_prefix$Git::SVN::default_ref_id"; } $_[1] = $repo_id; my $dir = "$ENV{GIT_DIR}/svn/$ref_id"; + + # Older repos imported by us used $GIT_DIR/svn/foo instead of + # $GIT_DIR/svn/refs/remotes/foo when tracking refs/remotes/foo + if ($ref_id =~ m{^refs/remotes/(.*)}) { + my $old_dir = "$ENV{GIT_DIR}/svn/$1"; + if (-d $old_dir && ! -d $dir) { + $dir = $old_dir; + } + } + $_[3] = $path = '' unless (defined $path); - mkpath(["$ENV{GIT_DIR}/svn"]); + mkpath([$dir]); bless { ref_id => $ref_id, dir => $dir, index => "$dir/index", path => $path, config => "$ENV{GIT_DIR}/svn/config", @@ -5495,7 +5533,7 @@ sub minimize_connections { my $pfx = "svn-remote.$x->{old_repo_id}"; my $old_fetch = quotemeta("$x->{old_path}:". - "refs/remotes/$x->{ref_id}"); + "$x->{ref_id}"); command_noisy(qw/config --unset/, "$pfx.fetch", '^'. $old_fetch . '$'); delete $r->{$x->{old_repo_id}}-> @@ -5564,7 +5602,7 @@ sub new { my ($class, $glob) = @_; my $re = $glob; $re =~ s!/+$!!g; # no need for trailing slashes - $re =~ m!^([^*]*)(\*(?:/\*)*)([^*]*)$!; + $re =~ m!^([^*]*)(\*(?:/\*)*)(.*)$!; my $temp = $re; my ($left, $right) = ($1, $3); $re = $2; @@ -416,13 +416,9 @@ static void execv_dashed_external(const char **argv) * if we fail because the command is not found, it is * OK to return. Otherwise, we just pass along the status code. */ - status = run_command_v_opt(argv, 0); - if (status != -ERR_RUN_COMMAND_EXEC) { - if (IS_RUN_COMMAND_ERR(status)) - die("unable to run '%s'", argv[0]); - exit(-status); - } - errno = ENOENT; /* as if we called execvp */ + status = run_command_v_opt(argv, RUN_SILENT_EXEC_FAILURE); + if (status >= 0 || errno != ENOENT) + exit(status); argv[0] = tmp; diff --git a/gitk-git/gitk b/gitk-git/gitk index 4604c831fe..8c08310e6d 100644 --- a/gitk-git/gitk +++ b/gitk-git/gitk @@ -288,7 +288,7 @@ proc parseviewrevs {view revs} { if {$sdm != 2} { lappend ret $id } else { - lset ret end [lindex $ret end]...$id + lset ret end $id...[lindex $ret end] } lappend pos $id } @@ -1677,6 +1677,7 @@ proc readrefs {} { global tagids idtags headids idheads tagobjid global otherrefids idotherrefs mainhead mainheadid global selecthead selectheadid + global hideremotes foreach v {tagids idtags headids idheads otherrefids idotherrefs} { catch {unset $v} @@ -1689,7 +1690,7 @@ proc readrefs {} { if {![string match "refs/*" $ref]} continue set name [string range $ref 5 end] if {[string match "remotes/*" $name]} { - if {![string match "*/HEAD" $name]} { + if {![string match "*/HEAD" $name] && !$hideremotes} { set headids($name) $id lappend idheads($id) $name } @@ -2520,6 +2521,7 @@ proc savestuff {w} { global cmitmode wrapcomment datetimeformat limitdiffs global colors bgcolor fgcolor diffcolors diffcontext selectbgcolor global autoselect extdifftool perfile_attrs markbgcolor + global hideremotes if {$stuffsaved} return if {![winfo viewable .]} return @@ -2539,6 +2541,7 @@ proc savestuff {w} { puts $f [list set wrapcomment $wrapcomment] puts $f [list set autoselect $autoselect] puts $f [list set showneartags $showneartags] + puts $f [list set hideremotes $hideremotes] puts $f [list set showlocalchanges $showlocalchanges] puts $f [list set datetimeformat $datetimeformat] puts $f [list set limitdiffs $limitdiffs] @@ -7906,6 +7909,11 @@ proc gotocommit {} { } set id [lindex $matches 0] } + } else { + if {[catch {set id [exec git rev-parse --verify $sha1string]}]} { + error_popup [mc "Revision %s is not known" $sha1string] + return + } } } if {[commitinview $id $curview]} { @@ -7915,7 +7923,7 @@ proc gotocommit {} { if {[regexp {^[0-9a-fA-F]{4,}$} $sha1string]} { set msg [mc "SHA1 id %s is not known" $sha1string] } else { - set msg [mc "Tag/Head %s is not known" $sha1string] + set msg [mc "Revision %s is not in the current view" $sha1string] } error_popup $msg } @@ -10383,6 +10391,7 @@ proc doprefs {} { global oldprefs prefstop showneartags showlocalchanges global bgcolor fgcolor ctext diffcolors selectbgcolor markbgcolor global tabstop limitdiffs autoselect extdifftool perfile_attrs + global hideremotes set top .gitkprefs set prefstop $top @@ -10391,7 +10400,7 @@ proc doprefs {} { return } foreach v {maxwidth maxgraphpct showneartags showlocalchanges \ - limitdiffs tabstop perfile_attrs} { + limitdiffs tabstop perfile_attrs hideremotes} { set oldprefs($v) [set $v] } toplevel $top @@ -10423,6 +10432,9 @@ proc doprefs {} { checkbutton $top.ntag -text [mc "Display nearby tags"] \ -font optionfont -variable showneartags grid x $top.ntag -sticky w + checkbutton $top.hideremotes -text [mc "Hide remote refs"] \ + -font optionfont -variable hideremotes + grid x $top.hideremotes -sticky w checkbutton $top.ldiff -text [mc "Limit diffs to listed paths"] \ -font optionfont -variable limitdiffs grid x $top.ldiff -sticky w @@ -10547,7 +10559,7 @@ proc prefscan {} { global oldprefs prefstop foreach v {maxwidth maxgraphpct showneartags showlocalchanges \ - limitdiffs tabstop perfile_attrs} { + limitdiffs tabstop perfile_attrs hideremotes} { global $v set $v $oldprefs($v) } @@ -10561,6 +10573,7 @@ proc prefsok {} { global oldprefs prefstop showneartags showlocalchanges global fontpref mainfont textfont uifont global limitdiffs treediffs perfile_attrs + global hideremotes catch {destroy $prefstop} unset prefstop @@ -10606,6 +10619,9 @@ proc prefsok {} { $limitdiffs != $oldprefs(limitdiffs)} { reselectline } + if {$hideremotes != $oldprefs(hideremotes)} { + rereadrefs + } } proc formatdate {d} { @@ -10901,7 +10917,7 @@ proc gitattr {path attr default} { } else { set r "unspecified" if {![catch {set line [exec git check-attr $attr -- $path]}]} { - regexp "(.*): encoding: (.*)" $line m f r + regexp "(.*): $attr: (.*)" $line m f r } set path_attr_cache($attr,$path) $r } @@ -10929,7 +10945,7 @@ proc cache_gitattr {attr pathlist} { set newlist [lrange $newlist $lim end] if {![catch {set rlist [eval exec git check-attr $attr -- $head]}]} { foreach row [split $rlist "\n"] { - if {[regexp "(.*): encoding: (.*)" $row m path value]} { + if {[regexp "(.*): $attr: (.*)" $row m path value]} { if {[string index $path 0] eq "\""} { set path [encoding convertfrom [lindex $path 0]] } @@ -11011,6 +11027,7 @@ set mingaplen 100 set cmitmode "patch" set wrapcomment "none" set showneartags 1 +set hideremotes 0 set maxrefs 20 set maxlinelen 200 set showlocalchanges 1 diff --git a/gitweb/README b/gitweb/README index 9056d1e090..66c6a9391d 100644 --- a/gitweb/README +++ b/gitweb/README @@ -165,6 +165,12 @@ not include variables usually directly set during build): Full URL and absolute URL of gitweb script; in earlier versions of gitweb you might have need to set those variables, now there should be no need to do it. + * $base_url + Base URL for relative URLs in pages generated by gitweb, + (e.g. $logo, $favicon, @stylesheets if they are relative URLs), + needed and used only for URLs with nonempty PATH_INFO via + <base href="$base_url>. Usually gitweb sets its value correctly, + and there is no need to set this variable, e.g. to $my_uri or "/". * $home_link Target of the home link on top of all pages (the first part of view "breadcrumbs"). By default set to absolute URI of a page ($my_uri). diff --git a/gitweb/git-favicon.png b/gitweb/git-favicon.png Binary files differindex de637c0608..aae35a70e7 100644 --- a/gitweb/git-favicon.png +++ b/gitweb/git-favicon.png diff --git a/gitweb/git-logo.png b/gitweb/git-logo.png Binary files differindex 16ae8d5382..f4ede2e944 100644 --- a/gitweb/git-logo.png +++ b/gitweb/git-logo.png diff --git a/gitweb/gitweb.css b/gitweb/gitweb.css index d05bc37646..8f68fe3091 100644 --- a/gitweb/gitweb.css +++ b/gitweb/gitweb.css @@ -226,22 +226,30 @@ th { text-align: left; } -tr.light:hover { - background-color: #edece6; -} - -tr.dark { - background-color: #f6f6f0; +/* do not change row style on hover for 'blame' view */ +tr.light, +table.blame .light:hover { + background-color: #ffffff; } -tr.dark2 { +tr.dark, +table.blame .dark:hover { background-color: #f6f6f0; } +/* currently both use the same, but it can change */ +tr.light:hover, tr.dark:hover { background-color: #edece6; } +/* boundary commits in 'blame' view */ +/* and commits without "previous" */ +tr.boundary td.sha1, +tr.no-previous td.linenr { + font-weight: bold; +} + td { padding: 2px 5px; font-size: 100%; @@ -262,7 +270,7 @@ td.sha1 { font-family: monospace; } -td.error { +.error { color: red; background-color: yellow; } diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 7fbd5ff89e..be7358fdeb 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -940,10 +940,13 @@ sub href { if (defined $params{'hash_parent_base'}) { $href .= esc_url($params{'hash_parent_base'}); # skip the file_parent if it's the same as the file_name - delete $params{'file_parent'} if $params{'file_parent'} eq $params{'file_name'}; - if (defined $params{'file_parent'} && $params{'file_parent'} !~ /\.\./) { - $href .= ":/".esc_url($params{'file_parent'}); - delete $params{'file_parent'}; + if (defined $params{'file_parent'}) { + if (defined $params{'file_name'} && $params{'file_parent'} eq $params{'file_name'}) { + delete $params{'file_parent'}; + } elsif ($params{'file_parent'} !~ /\.\./) { + $href .= ":/".esc_url($params{'file_parent'}); + delete $params{'file_parent'}; + } } $href .= ".."; delete $params{'hash_parent'}; @@ -2570,7 +2573,7 @@ sub parse_commit_text { } elsif ((!defined $withparents) && ($line =~ m/^parent ([0-9a-fA-F]{40})$/)) { push @parents, $1; } elsif ($line =~ m/^author (.*) ([0-9]+) (.*)$/) { - $co{'author'} = $1; + $co{'author'} = to_utf8($1); $co{'author_epoch'} = $2; $co{'author_tz'} = $3; if ($co{'author'} =~ m/^([^<]+) <([^>]*)>/) { @@ -2580,10 +2583,9 @@ sub parse_commit_text { $co{'author_name'} = $co{'author'}; } } elsif ($line =~ m/^committer (.*) ([0-9]+) (.*)$/) { - $co{'committer'} = $1; + $co{'committer'} = to_utf8($1); $co{'committer_epoch'} = $2; $co{'committer_tz'} = $3; - $co{'committer_name'} = $co{'committer'}; if ($co{'committer'} =~ m/^([^<]+) <([^>]*)>/) { $co{'committer_name'} = $1; $co{'committer_email'} = $2; @@ -4801,7 +4803,7 @@ sub git_blame { git_print_page_path($file_name, $ftype, $hash_base); # page body - my @rev_color = qw(light2 dark2); + my @rev_color = qw(light dark); my $num_colors = scalar(@rev_color); my $current_color = 0; my %metainfo = (); @@ -4819,15 +4821,18 @@ HTML my ($full_rev, $orig_lineno, $lineno, $group_size) = ($line =~ /^([0-9a-f]{40}) (\d+) (\d+)(?: (\d+))?$/); if (!exists $metainfo{$full_rev}) { - $metainfo{$full_rev} = {}; + $metainfo{$full_rev} = { 'nprevious' => 0 }; } my $meta = $metainfo{$full_rev}; my $data; while ($data = <$fd>) { chomp $data; last if ($data =~ s/^\t//); # contents of line - if ($data =~ /^(\S+) (.*)$/) { - $meta->{$1} = $2; + if ($data =~ /^(\S+)(?: (.*))?$/) { + $meta->{$1} = $2 unless exists $meta->{$1}; + } + if ($data =~ /^previous /) { + $meta->{'nprevious'}++; } } my $short_rev = substr($full_rev, 0, 8); @@ -4838,7 +4843,11 @@ HTML if ($group_size) { $current_color = ($current_color + 1) % $num_colors; } - print "<tr id=\"l$lineno\" class=\"$rev_color[$current_color]\">\n"; + my $tr_class = $rev_color[$current_color]; + $tr_class .= ' boundary' if (exists $meta->{'boundary'}); + $tr_class .= ' no-previous' if ($meta->{'nprevious'} == 0); + $tr_class .= ' multiple-previous' if ($meta->{'nprevious'} > 1); + print "<tr id=\"l$lineno\" class=\"$tr_class\">\n"; if ($group_size) { print "<td class=\"sha1\""; print " title=\"". esc_html($author) . ", $date\""; @@ -4848,22 +4857,31 @@ HTML hash=>$full_rev, file_name=>$file_name)}, esc_html($short_rev)); + if ($group_size >= 2) { + my @author_initials = ($author =~ /\b([[:upper:]])\B/g); + if (@author_initials) { + print "<br />" . + esc_html(join('', @author_initials)); + # or join('.', ...) + } + } print "</td>\n"; } - my $parent_commit; - if (!exists $meta->{'parent'}) { - open (my $dd, "-|", git_cmd(), "rev-parse", "$full_rev^") - or die_error(500, "Open git-rev-parse failed"); - $parent_commit = <$dd>; - close $dd; - chomp($parent_commit); - $meta->{'parent'} = $parent_commit; - } else { - $parent_commit = $meta->{'parent'}; - } + # 'previous' <sha1 of parent commit> <filename at commit> + if (exists $meta->{'previous'} && + $meta->{'previous'} =~ /^([a-fA-F0-9]{40}) (.*)$/) { + $meta->{'parent'} = $1; + $meta->{'file_parent'} = unquote($2); + } + my $linenr_commit = + exists($meta->{'parent'}) ? + $meta->{'parent'} : $full_rev; + my $linenr_filename = + exists($meta->{'file_parent'}) ? + $meta->{'file_parent'} : unquote($meta->{'filename'}); my $blamed = href(action => 'blame', - file_name => $meta->{'filename'}, - hash_base => $parent_commit); + file_name => $linenr_filename, + hash_base => $linenr_commit); print "<td class=\"linenr\">"; print $cgi->a({ -href => "$blamed#l$orig_lineno", -class => "linenr" }, @@ -225,7 +225,12 @@ struct git_graph *graph_init(struct rev_info *opt) graph->num_columns = 0; graph->num_new_columns = 0; graph->mapping_size = 0; - graph->default_column_color = 0; + /* + * Start the column color at the maximum value, since we'll + * always increment it for the first commit we output. + * This way we start at 0 for the first commit. + */ + graph->default_column_color = COLUMN_COLORS_MAX - 1; /* * Allocate a reasonably large default number of columns @@ -499,11 +504,14 @@ static void graph_update_columns(struct git_graph *graph) parent; parent = next_interesting_parent(graph, parent)) { /* - * If this is a merge increment the current + * If this is a merge, or the start of a new + * childless column, increment the current * color. */ - if (graph->num_parents > 1) + if (graph->num_parents > 1 || + !is_commit_in_columns) { graph_increment_column_color(graph); + } graph_insert_into_new_columns(graph, parent->item, &mapping_idx); @@ -79,6 +79,7 @@ struct grep_opt { int pathname; int null_following_name; int color; + int max_depth; int funcname; char color_match[COLOR_MAXLEN]; const char *color_external; @@ -302,7 +302,7 @@ const char *help_unknown_cmd(const char *cmd) struct cmdnames main_cmds, other_cmds; memset(&main_cmds, 0, sizeof(main_cmds)); - memset(&other_cmds, 0, sizeof(main_cmds)); + memset(&other_cmds, 0, sizeof(other_cmds)); memset(&aliases, 0, sizeof(aliases)); git_config(git_unknown_cmd_config, NULL); @@ -334,7 +334,7 @@ const char *help_unknown_cmd(const char *cmd) const char *assumed = main_cmds.names[0]->name; main_cmds.names[0] = NULL; clean_cmdnames(&main_cmds); - fprintf(stderr, "WARNING: You called a Git program named '%s', " + fprintf(stderr, "WARNING: You called a Git command named '%s', " "which does not exist.\n" "Continuing under the assumption that you meant '%s'\n", cmd, assumed); @@ -719,7 +719,9 @@ void append_remote_object_url(struct strbuf *buf, const char *url, const char *hex, int only_two_digit_prefix) { - strbuf_addf(buf, "%s/objects/%.*s/", url, 2, hex); + end_url_with_slash(buf, url); + + strbuf_addf(buf, "objects/%.*s/", 2, hex); if (!only_two_digit_prefix) strbuf_addf(buf, "%s", hex+2); } @@ -1004,7 +1006,6 @@ int finish_http_pack_request(struct http_pack_request *preq) struct http_pack_request *new_http_pack_request( struct packed_git *target, const char *base_url) { - char *url; char *filename; long prev_posn = 0; char range[RANGE_HEADER_SIZE]; @@ -1018,8 +1019,7 @@ struct http_pack_request *new_http_pack_request( end_url_with_slash(&buf, base_url); strbuf_addf(&buf, "objects/pack/pack-%s.pack", sha1_to_hex(target->sha1)); - url = strbuf_detach(&buf, NULL); - preq->url = xstrdup(url); + preq->url = strbuf_detach(&buf, NULL); filename = sha1_pack_name(target->sha1); snprintf(preq->filename, sizeof(preq->filename), "%s", filename); @@ -1035,7 +1035,7 @@ struct http_pack_request *new_http_pack_request( preq->slot->local = preq->packfile; curl_easy_setopt(preq->slot->curl, CURLOPT_FILE, preq->packfile); curl_easy_setopt(preq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite); - curl_easy_setopt(preq->slot->curl, CURLOPT_URL, url); + curl_easy_setopt(preq->slot->curl, CURLOPT_URL, preq->url); curl_easy_setopt(preq->slot->curl, CURLOPT_HTTPHEADER, no_pragma_header); @@ -1059,6 +1059,8 @@ struct http_pack_request *new_http_pack_request( abort: free(filename); + free(preq->url); + free(preq); return NULL; } @@ -1098,7 +1100,6 @@ struct http_object_request *new_http_object_request(const char *base_url, char *hex = sha1_to_hex(sha1); char *filename; char prevfile[PATH_MAX]; - char *url; int prevlocal; unsigned char prev_buf[PREV_BUF_SIZE]; ssize_t prev_read = 0; @@ -1152,8 +1153,7 @@ struct http_object_request *new_http_object_request(const char *base_url, git_SHA1_Init(&freq->c); - url = get_remote_object_url(base_url, hex, 0); - freq->url = xstrdup(url); + freq->url = get_remote_object_url(base_url, hex, 0); /* * If a previous temp file is present, process what was already @@ -1189,7 +1189,11 @@ struct http_object_request *new_http_object_request(const char *base_url, if (prev_posn>0) { prev_posn = 0; lseek(freq->localfile, 0, SEEK_SET); - ftruncate(freq->localfile, 0); + if (ftruncate(freq->localfile, 0) < 0) { + error("Couldn't truncate temporary file %s for %s: %s", + freq->tmpfile, freq->filename, strerror(errno)); + goto abort; + } } } @@ -1198,7 +1202,7 @@ struct http_object_request *new_http_object_request(const char *base_url, curl_easy_setopt(freq->slot->curl, CURLOPT_FILE, freq); curl_easy_setopt(freq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite_sha1_file); curl_easy_setopt(freq->slot->curl, CURLOPT_ERRORBUFFER, freq->errorstr); - curl_easy_setopt(freq->slot->curl, CURLOPT_URL, url); + curl_easy_setopt(freq->slot->curl, CURLOPT_URL, freq->url); curl_easy_setopt(freq->slot->curl, CURLOPT_HTTPHEADER, no_pragma_header); /* @@ -1218,9 +1222,9 @@ struct http_object_request *new_http_object_request(const char *base_url, return freq; - free(url); abort: free(filename); + free(freq->url); free(freq); return NULL; } diff --git a/ll-merge.c b/ll-merge.c index 0571564ddf..2d6b6d6cb1 100644 --- a/ll-merge.c +++ b/ll-merge.c @@ -192,10 +192,6 @@ static int ll_ext_merge(const struct ll_merge_driver *fn, args[2] = cmd.buf; status = run_command_v_opt(args, 0); - if (status < -ERR_RUN_COMMAND_FORK) - ; /* failure in run-command */ - else - status = -status; fd = open(temp[1], O_RDONLY); if (fd < 0) goto bad; diff --git a/log-tree.c b/log-tree.c index 6f73c17d74..a3b4c0692c 100644 --- a/log-tree.c +++ b/log-tree.c @@ -168,18 +168,6 @@ static unsigned int digits_in_number(unsigned int number) return result; } -static int has_non_ascii(const char *s) -{ - int ch; - if (!s) - return 0; - while ((ch = *s++) != '\0') { - if (non_ascii(ch)) - return 1; - } - return 0; -} - void get_patch_filename(struct commit *commit, int nr, const char *suffix, struct strbuf *buf) { diff --git a/merge-recursive.c b/merge-recursive.c index d415c4188d..10d7913b06 100644 --- a/merge-recursive.c +++ b/merge-recursive.c @@ -952,9 +952,31 @@ static int process_renames(struct merge_options *o, "%s added in %s", ren1_src, ren1_dst, branch1, ren1_dst, branch2); - new_path = unique_path(o, ren1_dst, branch2); - output(o, 1, "Adding as %s instead", new_path); - update_file(o, 0, dst_other.sha1, dst_other.mode, new_path); + if (o->call_depth) { + struct merge_file_info mfi; + struct diff_filespec one, a, b; + + one.path = a.path = b.path = + (char *)ren1_dst; + hashcpy(one.sha1, null_sha1); + one.mode = 0; + hashcpy(a.sha1, ren1->pair->two->sha1); + a.mode = ren1->pair->two->mode; + hashcpy(b.sha1, dst_other.sha1); + b.mode = dst_other.mode; + mfi = merge_file(o, &one, &a, &b, + branch1, + branch2); + output(o, 1, "Adding merged %s", ren1_dst); + update_file(o, 0, + mfi.sha, + mfi.mode, + ren1_dst); + } else { + new_path = unique_path(o, ren1_dst, branch2); + output(o, 1, "Adding as %s instead", new_path); + update_file(o, 0, dst_other.sha1, dst_other.mode, new_path); + } } else if ((item = string_list_lookup(ren1_dst, renames2Dst))) { ren2 = item->util; clean_merge = 0; @@ -86,6 +86,18 @@ int non_ascii(int ch) return !isascii(ch) || ch == '\033'; } +int has_non_ascii(const char *s) +{ + int ch; + if (!s) + return 0; + while ((ch = *s++) != '\0') { + if (non_ascii(ch)) + return 1; + } + return 0; +} + static int is_rfc2047_special(char ch) { return (non_ascii(ch) || (ch == '=') || (ch == '?') || (ch == '_')); @@ -821,7 +821,7 @@ static int remove_empty_directories(const char *file) strbuf_init(&path, 20); strbuf_addstr(&path, file); - result = remove_dir_recursively(&path, 1); + result = remove_dir_recursively(&path, REMOVE_DIR_EMPTY_ONLY); strbuf_release(&path); diff --git a/run-command.c b/run-command.c index ff3d8e2d8b..f3e7abb7de 100644 --- a/run-command.c +++ b/run-command.c @@ -19,6 +19,7 @@ int start_command(struct child_process *cmd) { int need_in, need_out, need_err; int fdin[2], fdout[2], fderr[2]; + int failed_errno = failed_errno; /* * In case of errors we must keep the promise to close FDs @@ -28,9 +29,10 @@ int start_command(struct child_process *cmd) need_in = !cmd->no_stdin && cmd->in < 0; if (need_in) { if (pipe(fdin) < 0) { + failed_errno = errno; if (cmd->out > 0) close(cmd->out); - return -ERR_RUN_COMMAND_PIPE; + goto fail_pipe; } cmd->in = fdin[1]; } @@ -40,11 +42,12 @@ int start_command(struct child_process *cmd) && cmd->out < 0; if (need_out) { if (pipe(fdout) < 0) { + failed_errno = errno; if (need_in) close_pair(fdin); else if (cmd->in) close(cmd->in); - return -ERR_RUN_COMMAND_PIPE; + goto fail_pipe; } cmd->out = fdout[0]; } @@ -52,6 +55,7 @@ int start_command(struct child_process *cmd) need_err = !cmd->no_stderr && cmd->err < 0; if (need_err) { if (pipe(fderr) < 0) { + failed_errno = errno; if (need_in) close_pair(fdin); else if (cmd->in) @@ -60,7 +64,11 @@ int start_command(struct child_process *cmd) close_pair(fdout); else if (cmd->out) close(cmd->out); - return -ERR_RUN_COMMAND_PIPE; +fail_pipe: + error("cannot create pipe for %s: %s", + cmd->argv[0], strerror(failed_errno)); + errno = failed_errno; + return -1; } cmd->err = fderr[0]; } @@ -122,6 +130,9 @@ int start_command(struct child_process *cmd) strerror(errno)); exit(127); } + if (cmd->pid < 0) + error("cannot fork() for %s: %s", cmd->argv[0], + strerror(failed_errno = errno)); #else int s0 = -1, s1 = -1, s2 = -1; /* backups of stdin, stdout, stderr */ const char **sargv = cmd->argv; @@ -173,6 +184,9 @@ int start_command(struct child_process *cmd) } cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env); + failed_errno = errno; + if (cmd->pid < 0 && (!cmd->silent_exec_failure || errno != ENOENT)) + error("cannot spawn %s: %s", cmd->argv[0], strerror(errno)); if (cmd->env) free_environ(env); @@ -189,7 +203,6 @@ int start_command(struct child_process *cmd) #endif if (cmd->pid < 0) { - int err = errno; if (need_in) close_pair(fdin); else if (cmd->in) @@ -200,9 +213,8 @@ int start_command(struct child_process *cmd) close(cmd->out); if (need_err) close_pair(fderr); - return err == ENOENT ? - -ERR_RUN_COMMAND_EXEC : - -ERR_RUN_COMMAND_FORK; + errno = failed_errno; + return -1; } if (need_in) @@ -221,40 +233,51 @@ int start_command(struct child_process *cmd) return 0; } -static int wait_or_whine(pid_t pid) +static int wait_or_whine(pid_t pid, const char *argv0, int silent_exec_failure) { - for (;;) { - int status, code; - pid_t waiting = waitpid(pid, &status, 0); - - if (waiting < 0) { - if (errno == EINTR) - continue; - error("waitpid failed (%s)", strerror(errno)); - return -ERR_RUN_COMMAND_WAITPID; - } - if (waiting != pid) - return -ERR_RUN_COMMAND_WAITPID_WRONG_PID; - if (WIFSIGNALED(status)) - return -ERR_RUN_COMMAND_WAITPID_SIGNAL; - - if (!WIFEXITED(status)) - return -ERR_RUN_COMMAND_WAITPID_NOEXIT; + int status, code = -1; + pid_t waiting; + int failed_errno = 0; + + while ((waiting = waitpid(pid, &status, 0)) < 0 && errno == EINTR) + ; /* nothing */ + + if (waiting < 0) { + failed_errno = errno; + error("waitpid for %s failed: %s", argv0, strerror(errno)); + } else if (waiting != pid) { + error("waitpid is confused (%s)", argv0); + } else if (WIFSIGNALED(status)) { + code = WTERMSIG(status); + error("%s died of signal %d", argv0, code); + /* + * This return value is chosen so that code & 0xff + * mimics the exit code that a POSIX shell would report for + * a program that died from this signal. + */ + code -= 128; + } else if (WIFEXITED(status)) { code = WEXITSTATUS(status); - switch (code) { - case 127: - return -ERR_RUN_COMMAND_EXEC; - case 0: - return 0; - default: - return -code; + /* + * Convert special exit code when execvp failed. + */ + if (code == 127) { + code = -1; + failed_errno = ENOENT; + if (!silent_exec_failure) + error("cannot run %s: %s", argv0, + strerror(ENOENT)); } + } else { + error("waitpid is confused (%s)", argv0); } + errno = failed_errno; + return code; } int finish_command(struct child_process *cmd) { - return wait_or_whine(cmd->pid); + return wait_or_whine(cmd->pid, cmd->argv[0], cmd->silent_exec_failure); } int run_command(struct child_process *cmd) @@ -274,6 +297,7 @@ static void prepare_run_command_v_opt(struct child_process *cmd, cmd->no_stdin = opt & RUN_COMMAND_NO_STDIN ? 1 : 0; cmd->git_cmd = opt & RUN_GIT_CMD ? 1 : 0; cmd->stdout_to_stderr = opt & RUN_COMMAND_STDOUT_TO_STDERR ? 1 : 0; + cmd->silent_exec_failure = opt & RUN_SILENT_EXEC_FAILURE ? 1 : 0; } int run_command_v_opt(const char **argv, int opt) @@ -338,10 +362,7 @@ int start_async(struct async *async) int finish_async(struct async *async) { #ifndef __MINGW32__ - int ret = 0; - - if (wait_or_whine(async->pid)) - ret = error("waitpid (async) failed"); + int ret = wait_or_whine(async->pid, "child process", 0); #else DWORD ret = 0; if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0) @@ -385,15 +406,7 @@ int run_hook(const char *index_file, const char *name, ...) hook.env = env; } - ret = start_command(&hook); + ret = run_command(&hook); free(argv); - if (ret) { - warning("Could not spawn %s", argv[0]); - return ret; - } - ret = finish_command(&hook); - if (ret == -ERR_RUN_COMMAND_WAITPID_SIGNAL) - warning("%s exited due to uncaught signal", argv[0]); - return ret; } diff --git a/run-command.h b/run-command.h index e345502843..0c00b25ff2 100644 --- a/run-command.h +++ b/run-command.h @@ -1,17 +1,6 @@ #ifndef RUN_COMMAND_H #define RUN_COMMAND_H -enum { - ERR_RUN_COMMAND_FORK = 10000, - ERR_RUN_COMMAND_EXEC, - ERR_RUN_COMMAND_PIPE, - ERR_RUN_COMMAND_WAITPID, - ERR_RUN_COMMAND_WAITPID_WRONG_PID, - ERR_RUN_COMMAND_WAITPID_SIGNAL, - ERR_RUN_COMMAND_WAITPID_NOEXIT, -}; -#define IS_RUN_COMMAND_ERR(x) (-(x) >= ERR_RUN_COMMAND_FORK) - struct child_process { const char **argv; pid_t pid; @@ -42,6 +31,7 @@ struct child_process { unsigned no_stdout:1; unsigned no_stderr:1; unsigned git_cmd:1; /* if this is to be git sub-command */ + unsigned silent_exec_failure:1; unsigned stdout_to_stderr:1; void (*preexec_cb)(void); }; @@ -55,6 +45,7 @@ extern int run_hook(const char *index_file, const char *name, ...); #define RUN_COMMAND_NO_STDIN 1 #define RUN_GIT_CMD 2 /*If this is to be git sub-command */ #define RUN_COMMAND_STDOUT_TO_STDERR 4 +#define RUN_SILENT_EXEC_FAILURE 8 int run_command_v_opt(const char **argv, int opt); /* diff --git a/send-pack.h b/send-pack.h index 1d7b1b3b4f..8b3cf028ed 100644 --- a/send-pack.h +++ b/send-pack.h @@ -3,6 +3,7 @@ struct send_pack_args { unsigned verbose:1, + quiet:1, send_mirror:1, force_update:1, use_thin_pack:1, diff --git a/symlinks.c b/symlinks.c index 4bdded39c5..7b0a86d357 100644 --- a/symlinks.c +++ b/symlinks.c @@ -91,6 +91,10 @@ static int lstat_cache(struct cache_def *cache, const char *name, int len, longest_path_match(name, len, cache->path, cache->len, &previous_slash); match_flags = cache->flags & track_flags & (FL_NOENT|FL_SYMLINK); + + if (!(track_flags & FL_FULLPATH) && match_len == len) + match_len = last_slash = previous_slash; + if (match_flags && match_len == cache->len) return match_flags; /* diff --git a/t/Makefile b/t/Makefile index bf816fc850..bd09390d32 100644 --- a/t/Makefile +++ b/t/Makefile @@ -3,6 +3,8 @@ # Copyright (c) 2005 Junio C Hamano # +-include ../config.mak + #GIT_TEST_OPTS=--verbose --debug SHELL_PATH ?= $(SHELL) TAR ?= $(TAR) diff --git a/t/lib-git-svn.sh b/t/lib-git-svn.sh index 5654962343..fd8631f906 100644 --- a/t/lib-git-svn.sh +++ b/t/lib-git-svn.sh @@ -14,7 +14,7 @@ if ! test_have_prereq PERL; then fi GIT_DIR=$PWD/.git -GIT_SVN_DIR=$GIT_DIR/svn/git-svn +GIT_SVN_DIR=$GIT_DIR/svn/refs/remotes/git-svn SVN_TREE=$GIT_SVN_DIR/svn-tree svn >/dev/null 2>&1 diff --git a/t/t0001-init.sh b/t/t0001-init.sh index e3d846420d..5386504790 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -208,4 +208,87 @@ test_expect_success 'init rejects insanely long --template' ' ) ' +test_expect_success 'init creates a new directory' ' + rm -fr newdir && + ( + git init newdir && + test -d newdir/.git/refs + ) +' + +test_expect_success 'init creates a new bare directory' ' + rm -fr newdir && + ( + git init --bare newdir && + test -d newdir/refs + ) +' + +test_expect_success 'init recreates a directory' ' + rm -fr newdir && + ( + mkdir newdir && + git init newdir && + test -d newdir/.git/refs + ) +' + +test_expect_success 'init recreates a new bare directory' ' + rm -fr newdir && + ( + mkdir newdir && + git init --bare newdir && + test -d newdir/refs + ) +' + +test_expect_success 'init creates a new deep directory' ' + rm -fr newdir && + git init newdir/a/b/c && + test -d newdir/a/b/c/.git/refs +' + +test_expect_success POSIXPERM 'init creates a new deep directory (umask vs. shared)' ' + rm -fr newdir && + ( + # Leading directories should honor umask while + # the repository itself should follow "shared" + umask 002 && + git init --bare --shared=0660 newdir/a/b/c && + test -d newdir/a/b/c/refs && + ls -ld newdir/a newdir/a/b > lsab.out && + ! grep -v "^drwxrw[sx]r-x" lsab.out && + ls -ld newdir/a/b/c > lsc.out && + ! grep -v "^drwxrw[sx]---" lsc.out + ) +' + +test_expect_success 'init notices EEXIST (1)' ' + rm -fr newdir && + ( + >newdir && + test_must_fail git init newdir && + test -f newdir + ) +' + +test_expect_success 'init notices EEXIST (2)' ' + rm -fr newdir && + ( + mkdir newdir && + >newdir/a + test_must_fail git init newdir/a/b && + test -f newdir/a + ) +' + +test_expect_success POSIXPERM 'init notices EPERM' ' + rm -fr newdir && + ( + mkdir newdir && + chmod -w newdir && + test_must_fail git init newdir/a/b + ) +' + test_done diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 8c43dcde8a..83b7294010 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -755,6 +755,11 @@ echo >>result test_expect_success '--null --get-regexp' 'cmp result expect' +test_expect_success 'inner whitespace kept verbatim' ' + git config section.val "foo bar" && + test "z$(git config section.val)" = "zfoo bar" +' + test_expect_success SYMLINKS 'symlinked configuration' ' ln -s notyet myconfig && diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index a973628e8e..4cae019521 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -10,7 +10,7 @@ that the result still makes sense. ' . ./test-lib.sh -. ../lib-rebase.sh +. "$TEST_DIRECTORY"/lib-rebase.sh set_fake_editor diff --git a/t/t3409-rebase-preserve-merges.sh b/t/t3409-rebase-preserve-merges.sh index e6c832780f..297d165476 100755 --- a/t/t3409-rebase-preserve-merges.sh +++ b/t/t3409-rebase-preserve-merges.sh @@ -71,7 +71,7 @@ test_expect_success 'rebase -p fakes interactive rebase' ' git fetch && git rebase -p origin/topic && test 1 = $(git rev-list --all --pretty=oneline | grep "Modify A" | wc -l) && - test 1 = $(git rev-list --all --pretty=oneline | grep "Merge commit" | wc -l) + test 1 = $(git rev-list --all --pretty=oneline | grep "Merge remote branch " | wc -l) ) ' diff --git a/t/t3411-rebase-preserve-around-merges.sh b/t/t3411-rebase-preserve-around-merges.sh index 6533505218..14a23cd872 100755 --- a/t/t3411-rebase-preserve-around-merges.sh +++ b/t/t3411-rebase-preserve-around-merges.sh @@ -10,7 +10,7 @@ a merge to before the merge. ' . ./test-lib.sh -. ../lib-rebase.sh +. "$TEST_DIRECTORY"/lib-rebase.sh set_fake_editor diff --git a/t/t3414-rebase-preserve-onto.sh b/t/t3414-rebase-preserve-onto.sh index 80019ee072..ee0a6cccfd 100755 --- a/t/t3414-rebase-preserve-onto.sh +++ b/t/t3414-rebase-preserve-onto.sh @@ -10,7 +10,7 @@ aren'"'"'t on top of $ONTO, even if they are on top of $UPSTREAM. ' . ./test-lib.sh -. ../lib-rebase.sh +. "$TEST_DIRECTORY"/lib-rebase.sh # Set up branches like this: # A1---B1---E1---F1---G1 diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index fd2a55a5c2..62fd65e18d 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -163,6 +163,17 @@ test_expect_success FILEMODE 'stage mode but not hunk' ' git diff file | grep "+content" ' + +test_expect_success FILEMODE 'stage mode and hunk' ' + git reset --hard && + echo content >>file && + chmod +x file && + printf "y\\ny\\n" | git add -p && + git diff --cached file | grep "new mode" && + git diff --cached file | grep "+content" && + test -z "$(git diff file)" +' + # end of tests disabled when filemode is not usable test_expect_success 'setup again' ' diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 922a8941ed..531f5b795c 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -493,13 +493,12 @@ test_expect_success 'format-patch from a subdirectory (2)' ' ' test_expect_success 'format-patch from a subdirectory (3)' ' - here="$TEST_DIRECTORY/$test" && rm -f 0* && filename=$( rm -rf sub && mkdir -p sub/dir && cd sub/dir && - git format-patch -1 -o "$here" + git format-patch -1 -o "$TRASH_DIRECTORY" ) && basename=$(expr "$filename" : ".*/\(.*\)") && test -f "$basename" diff --git a/t/t4020-diff-external.sh b/t/t4020-diff-external.sh index 4ea42e00da..a7602cf923 100755 --- a/t/t4020-diff-external.sh +++ b/t/t4020-diff-external.sh @@ -166,7 +166,7 @@ test_expect_success 'diff --cached' ' git update-index --assume-unchanged file && echo second >file && git diff --cached >actual && - test_cmp ../t4020/diff.NUL actual + test_cmp "$TEST_DIRECTORY"/t4020/diff.NUL actual ' test_done diff --git a/t/t4132-apply-removal.sh b/t/t4132-apply-removal.sh new file mode 100755 index 0000000000..bb1ffe3b6c --- /dev/null +++ b/t/t4132-apply-removal.sh @@ -0,0 +1,95 @@ +#!/bin/sh +# +# Copyright (c) 2009 Junio C Hamano + +test_description='git-apply notices removal patches generated by GNU diff' + +. ./test-lib.sh + +test_expect_success setup ' + cat <<-EOF >c && + diff -ruN a/file b/file + --- a/file TS0 + +++ b/file TS1 + @@ -0,0 +1 @@ + +something + EOF + + cat <<-EOF >d && + diff -ruN a/file b/file + --- a/file TS0 + +++ b/file TS1 + @@ -1 +0,0 @@ + -something + EOF + + timeWest="1982-09-16 07:00:00.000000000 -0800" && + timeGMT="1982-09-16 15:00:00.000000000 +0000" && + timeEast="1982-09-17 00:00:00.000000000 +0900" && + + epocWest="1969-12-31 16:00:00.000000000 -0800" && + epocGMT="1970-01-01 00:00:00.000000000 +0000" && + epocEast="1970-01-01 09:00:00.000000000 +0900" && + + sed -e "s/TS0/$epocWest/" -e "s/TS1/$timeWest/" <c >createWest.patch && + sed -e "s/TS0/$epocEast/" -e "s/TS1/$timeEast/" <c >createEast.patch && + sed -e "s/TS0/$epocGMT/" -e "s/TS1/$timeGMT/" <c >createGMT.patch && + + sed -e "s/TS0/$timeWest/" -e "s/TS1/$timeWest/" <c >addWest.patch && + sed -e "s/TS0/$timeEast/" -e "s/TS1/$timeEast/" <c >addEast.patch && + sed -e "s/TS0/$timeGMT/" -e "s/TS1/$timeGMT/" <c >addGMT.patch && + + sed -e "s/TS0/$timeWest/" -e "s/TS1/$timeWest/" <d >emptyWest.patch && + sed -e "s/TS0/$timeEast/" -e "s/TS1/$timeEast/" <d >emptyEast.patch && + sed -e "s/TS0/$timeGMT/" -e "s/TS1/$timeGMT/" <d >emptyGMT.patch && + + sed -e "s/TS0/$timeWest/" -e "s/TS1/$epocWest/" <d >removeWest.patch && + sed -e "s/TS0/$timeEast/" -e "s/TS1/$epocEast/" <d >removeEast.patch && + sed -e "s/TS0/$timeGMT/" -e "s/TS1/$epocGMT/" <d >removeGMT.patch && + + echo something >something && + >empty +' + +for patch in *.patch +do + test_expect_success "test $patch" ' + rm -f file .git/index && + case "$patch" in + create*) + # must be able to create + git apply --index $patch && + test_cmp file something && + # must notice the file is already there + >file && + git add file && + test_must_fail git apply $patch + ;; + add*) + # must be able to create or patch + git apply $patch && + test_cmp file something && + >file && + git apply $patch && + test_cmp file something + ;; + empty*) + # must leave an empty file + cat something >file && + git add file && + git apply --index $patch && + test -f file && + test_cmp empty file + ;; + remove*) + # must remove the file + cat something >file && + git add file && + git apply --index $patch && + ! test -f file + ;; + esac + ' +done + +test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index a12bf84623..8296605234 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -77,6 +77,12 @@ test_expect_success setup ' git commit -s -F msg && git tag second && git format-patch --stdout first >patch1 && + { + echo "X-Fake-Field: Line One" && + echo "X-Fake-Field: Line Two" && + echo "X-Fake-Field: Line Three" && + git format-patch --stdout first | sed -e "1d" + } > patch1.eml && sed -n -e "3,\$p" msg >file && git add file && test_tick && @@ -108,6 +114,15 @@ test_expect_success 'am applies patch correctly' ' test "$(git rev-parse second^)" = "$(git rev-parse HEAD^)" ' +test_expect_success 'am applies patch e-mail not in a mbox' ' + git checkout first && + git am patch1.eml && + ! test -d .git/rebase-apply && + test -z "$(git diff second)" && + test "$(git rev-parse second)" = "$(git rev-parse HEAD)" && + test "$(git rev-parse second^)" = "$(git rev-parse HEAD^)" +' + GIT_AUTHOR_NAME="Another Thor" GIT_AUTHOR_EMAIL="a.thor@example.com" GIT_COMMITTER_NAME="Co M Miter" diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 48e0088b47..1e952ca55b 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -320,11 +320,11 @@ test_expect_success 'set up more tangled history' ' ' cat > expect <<\EOF -* Merge branch 'reach' +* Merge commit 'reach' |\ | \ | \ -*-. \ Merge branches 'octopus-a' and 'octopus-b' +*-. \ Merge commit 'octopus-a'; commit 'octopus-b' |\ \ \ * | | | seventh | | * | octopus-b diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index bee3424fed..d13c806624 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -9,6 +9,11 @@ test_description='Per branch config variables affects "git fetch". D=`pwd` +test_bundle_object_count () { + git verify-pack -v "$1" >verify.out && + test "$2" = $(grep '^[0-9a-f]\{40\} ' verify.out | wc -l) +} + test_expect_success setup ' echo >file original && git add file && @@ -146,6 +151,7 @@ test_expect_success 'unbundle 1' ' test_must_fail git fetch "$D/bundle1" master:master ' + test_expect_success 'bundle 1 has only 3 files ' ' cd "$D" && ( @@ -156,8 +162,7 @@ test_expect_success 'bundle 1 has only 3 files ' ' cat ) <bundle1 >bundle.pack && git index-pack bundle.pack && - verify=$(git verify-pack -v bundle.pack) && - test 4 = $(echo "$verify" | wc -l) + test_bundle_object_count bundle.pack 3 ' test_expect_success 'unbundle 2' ' @@ -180,7 +185,7 @@ test_expect_success 'bundle does not prerequisite objects' ' cat ) <bundle3 >bundle.pack && git index-pack bundle.pack && - test 4 = $(git verify-pack -v bundle.pack | wc -l) + test_bundle_object_count bundle.pack 3 ' test_expect_success 'bundle should be able to create a full history' ' diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index c5a2e66a09..dd2ee842e0 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -117,6 +117,19 @@ test_expect_success '--rebase with rebased default upstream' ' ' +test_expect_success 'rebased upstream + fetch + pull --rebase' ' + + git update-ref refs/remotes/me/copy copy-orig && + git reset --hard to-rebase-orig && + git checkout --track -b to-rebase3 me/copy && + git reset --hard to-rebase-orig && + git fetch && + git pull --rebase && + test "conflicting modification" = "$(cat file)" && + test file = "$(cat file2)" + +' + test_expect_success 'pull --rebase dies early with dirty working directory' ' git checkout to-rebase && @@ -136,4 +149,15 @@ test_expect_success 'pull --rebase dies early with dirty working directory' ' ' +test_expect_success 'pull --rebase works on branch yet to be born' ' + git rev-parse master >expect && + mkdir empty_repo && + (cd empty_repo && + git init && + git pull --rebase .. master && + git rev-parse HEAD >../actual + ) && + test_cmp expect actual +' + test_done diff --git a/t/t5530-upload-pack-error.sh b/t/t5530-upload-pack-error.sh index f5102b902a..a696b8791b 100755 --- a/t/t5530-upload-pack-error.sh +++ b/t/t5530-upload-pack-error.sh @@ -30,11 +30,12 @@ test_expect_success 'fsck fails' ' test_must_fail git fsck ' -test_expect_success 'upload-pack fails due to error in pack-objects' ' +test_expect_success 'upload-pack fails due to error in pack-objects packing' ' ! echo "0032want $(git rev-parse HEAD) 00000009done 0000" | git upload-pack . > /dev/null 2> output.err && + grep "unable to read" output.err && grep "pack-objects died" output.err ' @@ -51,9 +52,21 @@ test_expect_success 'fsck fails' ' test_expect_success 'upload-pack fails due to error in rev-list' ' ! echo "0032want $(git rev-parse HEAD) +0034shallow $(git rev-parse HEAD^)00000009done +0000" | git upload-pack . > /dev/null 2> output.err && + # pack-objects survived + grep "Total.*, reused" output.err && + # but there was an error, which must have been in rev-list + grep "bad tree object" output.err +' + +test_expect_success 'upload-pack fails due to error in pack-objects enumeration' ' + + ! echo "0032want $(git rev-parse HEAD) 00000009done 0000" | git upload-pack . > /dev/null 2> output.err && - grep "waitpid (async) failed" output.err + grep "bad tree object" output.err && + grep "pack-objects died" output.err ' test_expect_success 'create empty repository' ' diff --git a/t/t6010-merge-base.sh b/t/t6010-merge-base.sh index 04e4b7c5c2..0144d9e858 100755 --- a/t/t6010-merge-base.sh +++ b/t/t6010-merge-base.sh @@ -110,6 +110,18 @@ test_expect_success 'compute merge-base (all)' \ # Another set to demonstrate base between one commit and a merge # in the documentation. +# +# * C (MMC) * B (MMB) * A (MMA) +# * o * o * o +# * o * o * o +# * o * o * o +# * o | _______/ +# | |/ +# | * 1 (MM1) +# | _______/ +# |/ +# * root (MMR) + test_expect_success 'merge-base for octopus-step (setup)' ' test_tick && git commit --allow-empty -m root && git tag MMR && @@ -137,6 +149,12 @@ test_expect_success 'merge-base A B C' ' test "$MM1" = "$MB" ' +test_expect_success 'merge-base A B C using show-branch' ' + MB=$(git show-branch --merge-base MMA MMB MMC) && + MMR=$(git rev-parse --verify MMR) && + test "$MMR" = "$MB" +' + test_expect_success 'criss-cross merge-base for octopus-step (setup)' ' git reset --hard MMR && test_tick && git commit --allow-empty -m 1 && git tag CC1 && diff --git a/t/t6035-merge-dir-to-symlink.sh b/t/t6035-merge-dir-to-symlink.sh new file mode 100755 index 0000000000..5b96fb0b37 --- /dev/null +++ b/t/t6035-merge-dir-to-symlink.sh @@ -0,0 +1,93 @@ +#!/bin/sh + +test_description='merging when a directory was replaced with a symlink' +. ./test-lib.sh + +if ! test_have_prereq SYMLINKS +then + say 'Symbolic links not supported, skipping tests.' + test_done +fi + +test_expect_success 'create a commit where dir a/b changed to symlink' ' + mkdir -p a/b/c a/b-2/c && + > a/b/c/d && + > a/b-2/c/d && + > a/x && + git add -A && + git commit -m base && + git tag start && + rm -rf a/b && + ln -s b-2 a/b && + git add -A && + git commit -m "dir to symlink" +' + +test_expect_success 'keep a/b-2/c/d across checkout' ' + git checkout HEAD^0 && + git reset --hard master && + git rm --cached a/b && + git commit -m "untracked symlink remains" && + git checkout start^0 && + test -f a/b-2/c/d +' + +test_expect_success 'checkout should not have deleted a/b-2/c/d' ' + git checkout HEAD^0 && + git reset --hard master && + git checkout start^0 && + test -f a/b-2/c/d +' + +test_expect_success 'setup for merge test' ' + git reset --hard && + test -f a/b-2/c/d && + echo x > a/x && + git add a/x && + git commit -m x && + git tag baseline +' + +test_expect_success 'do not lose a/b-2/c/d in merge (resolve)' ' + git reset --hard && + git checkout baseline^0 && + git merge -s resolve master && + test -h a/b && + test -f a/b-2/c/d +' + +test_expect_failure 'do not lose a/b-2/c/d in merge (recursive)' ' + git reset --hard && + git checkout baseline^0 && + git merge -s recursive master && + test -h a/b && + test -f a/b-2/c/d +' + +test_expect_success 'setup a merge where dir a/b-2 changed to symlink' ' + git reset --hard && + git checkout start^0 && + rm -rf a/b-2 && + ln -s b a/b-2 && + git add -A && + git commit -m "dir a/b-2 to symlink" && + git tag test2 +' + +test_expect_failure 'merge should not have conflicts (resolve)' ' + git reset --hard && + git checkout baseline^0 && + git merge -s resolve test2 && + test -h a/b-2 && + test -f a/b/c/d +' + +test_expect_failure 'merge should not have conflicts (recursive)' ' + git reset --hard && + git checkout baseline^0 && + git merge -s recursive test2 && + test -h a/b-2 && + test -f a/b/c/d +' + +test_done diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh new file mode 100755 index 0000000000..b874141658 --- /dev/null +++ b/t/t6036-recursive-corner-cases.sh @@ -0,0 +1,55 @@ +#!/bin/sh + +test_description='recursive merge corner cases' + +. ./test-lib.sh + +# +# L1 L2 +# o---o +# / \ / \ +# o X ? +# \ / \ / +# o---o +# R1 R2 +# + +test_expect_success setup ' + ten="0 1 2 3 4 5 6 7 8 9" + for i in $ten + do + echo line $i in a sample file + done >one && + for i in $ten + do + echo line $i in another sample file + done >two && + git add one two && + test_tick && git commit -m initial && + + git branch L1 && + git checkout -b R1 && + git mv one three && + test_tick && git commit -m R1 && + + git checkout L1 && + git mv two three && + test_tick && git commit -m L1 && + + git checkout L1^0 && + test_tick && git merge -s ours R1 && + git tag L2 && + + git checkout R1^0 && + test_tick && git merge -s ours L1 && + git tag R2 +' + +test_expect_success merge ' + git reset --hard && + git checkout L2^0 && + + test_must_fail git merge -s recursive R2^0 +' + +test_done diff --git a/t/t7002-grep.sh b/t/t7002-grep.sh index b13aa7e89a..b4709e28b5 100755 --- a/t/t7002-grep.sh +++ b/t/t7002-grep.sh @@ -25,13 +25,17 @@ test_expect_success setup ' echo foo mmap bar_mmap echo foo_mmap bar mmap baz } >file && + echo vvv >v && echo ww w >w && echo x x xx x >x && echo y yy >y && echo zzz > z && mkdir t && echo test >t/t && - git add file w x y z t/t hello.c && + echo vvv >t/v && + mkdir t/a && + echo vvv >t/a/v && + git add . && test_tick && git commit -m initial ' @@ -132,6 +136,51 @@ do ! git grep -c test $H | grep /dev/null ' + test_expect_success "grep --max-depth -1 $L" ' + { + echo ${HC}t/a/v:1:vvv + echo ${HC}t/v:1:vvv + echo ${HC}v:1:vvv + } >expected && + git grep --max-depth -1 -n -e vvv $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep --max-depth 0 $L" ' + { + echo ${HC}v:1:vvv + } >expected && + git grep --max-depth 0 -n -e vvv $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep --max-depth 0 -- '*' $L" ' + { + echo ${HC}t/a/v:1:vvv + echo ${HC}t/v:1:vvv + echo ${HC}v:1:vvv + } >expected && + git grep --max-depth 0 -n -e vvv $H -- "*" >actual && + test_cmp expected actual + ' + + test_expect_success "grep --max-depth 1 $L" ' + { + echo ${HC}t/v:1:vvv + echo ${HC}v:1:vvv + } >expected && + git grep --max-depth 1 -n -e vvv $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep --max-depth 0 -- t $L" ' + { + echo ${HC}t/v:1:vvv + } >expected && + git grep --max-depth 0 -n -e vvv $H -- t >actual && + test_cmp expected actual + ' + done cat >expected <<EOF diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 929d5d4d3b..118c6ebb18 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -380,4 +380,43 @@ test_expect_success 'removal failure' ' ' chmod 755 foo +test_expect_success 'nested git work tree' ' + rm -fr foo bar && + mkdir foo bar && + ( + cd foo && + git init && + >hello.world + git add . && + git commit -a -m nested + ) && + ( + cd bar && + >goodbye.people + ) && + git clean -f -d && + test -f foo/.git/index && + test -f foo/hello.world && + ! test -d bar +' + +test_expect_success 'force removal of nested git work tree' ' + rm -fr foo bar && + mkdir foo bar && + ( + cd foo && + git init && + >hello.world + git add . && + git commit -a -m nested + ) && + ( + cd bar && + >goodbye.people + ) && + git clean -f -f -d && + ! test -d foo && + ! test -d bar +' + test_done diff --git a/t/t7406-submodule-reference.sh b/t/t7408-submodule-reference.sh index cc16d3f05d..cc16d3f05d 100755 --- a/t/t7406-submodule-reference.sh +++ b/t/t7408-submodule-reference.sh diff --git a/t/t7608-merge-messages.sh b/t/t7608-merge-messages.sh new file mode 100755 index 0000000000..28d56797b1 --- /dev/null +++ b/t/t7608-merge-messages.sh @@ -0,0 +1,60 @@ +#!/bin/sh + +test_description='test auto-generated merge messages' +. ./test-lib.sh + +check_oneline() { + echo "$1" | sed "s/Q/'/g" >expect && + git log -1 --pretty=tformat:%s >actual && + test_cmp expect actual +} + +test_expect_success 'merge local branch' ' + test_commit master-1 && + git checkout -b local-branch && + test_commit branch-1 && + git checkout master && + test_commit master-2 && + git merge local-branch && + check_oneline "Merge branch Qlocal-branchQ" +' + +test_expect_success 'merge octopus branches' ' + git checkout -b octopus-a master && + test_commit octopus-1 && + git checkout -b octopus-b master && + test_commit octopus-2 && + git checkout master && + git merge octopus-a octopus-b && + check_oneline "Merge branches Qoctopus-aQ and Qoctopus-bQ" +' + +test_expect_success 'merge tag' ' + git checkout -b tag-branch master && + test_commit tag-1 && + git checkout master && + test_commit master-3 && + git merge tag-1 && + check_oneline "Merge commit Qtag-1Q" +' + +test_expect_success 'ambiguous tag' ' + git checkout -b ambiguous master && + test_commit ambiguous && + git checkout master && + test_commit master-4 && + git merge ambiguous && + check_oneline "Merge commit QambiguousQ" +' + +test_expect_success 'remote branch' ' + git checkout -b remote master && + test_commit remote-1 && + git update-ref refs/remotes/origin/master remote && + git checkout master && + test_commit master-5 && + git merge origin/master && + check_oneline "Merge remote branch Qorigin/masterQ" +' + +test_done diff --git a/t/t9101-git-svn-props.sh b/t/t9101-git-svn-props.sh index 9da4178c94..929499e996 100755 --- a/t/t9101-git-svn-props.sh +++ b/t/t9101-git-svn-props.sh @@ -142,7 +142,9 @@ test_expect_success 'test show-ignore' " touch deeply/nested/directory/.keep && svn_cmd add deeply && svn_cmd up && - svn_cmd propset -R svn:ignore 'no-such-file*' . + svn_cmd propset -R svn:ignore ' +no-such-file* +' . svn_cmd commit -m 'propset svn:ignore' cd .. && git svn show-ignore > show-ignore.got && @@ -171,6 +173,7 @@ test_expect_success 'test create-ignore' " " cat >prop.expect <<\EOF + no-such-file* EOF diff --git a/t/t9104-git-svn-follow-parent.sh b/t/t9104-git-svn-follow-parent.sh index 78610b61e6..bbfd7f4793 100755 --- a/t/t9104-git-svn-follow-parent.sh +++ b/t/t9104-git-svn-follow-parent.sh @@ -172,11 +172,11 @@ test_expect_success "follow-parent is atomic" ' git update-ref refs/remotes/flunk@18 refs/remotes/stunk~2 && git update-ref -d refs/remotes/stunk && git config --unset svn-remote.svn.fetch stunk && - mkdir -p "$GIT_DIR"/svn/flunk@18 && - rev_map=$(cd "$GIT_DIR"/svn/stunk && ls .rev_map*) && - dd if="$GIT_DIR"/svn/stunk/$rev_map \ - of="$GIT_DIR"/svn/flunk@18/$rev_map bs=24 count=1 && - rm -rf "$GIT_DIR"/svn/stunk && + mkdir -p "$GIT_DIR"/svn/refs/remotes/flunk@18 && + rev_map=$(cd "$GIT_DIR"/svn/refs/remotes/stunk && ls .rev_map*) && + dd if="$GIT_DIR"/svn/refs/remotes/stunk/$rev_map \ + of="$GIT_DIR"/svn/refs/remotes/flunk@18/$rev_map bs=24 count=1 && + rm -rf "$GIT_DIR"/svn/refs/remotes/stunk && git svn init --minimize-url -i flunk "$svnrepo"/flunk && git svn fetch -i flunk && git svn init --minimize-url -i stunk "$svnrepo"/stunk && diff --git a/t/t9107-git-svn-migrate.sh b/t/t9107-git-svn-migrate.sh index 3a9e07768d..901b8e09fb 100755 --- a/t/t9107-git-svn-migrate.sh +++ b/t/t9107-git-svn-migrate.sh @@ -16,9 +16,7 @@ test_expect_success 'setup old-looking metadata' ' cd .. && git svn init "$svnrepo" && git svn fetch && - mv "$GIT_DIR"/svn/* "$GIT_DIR"/ && - mv "$GIT_DIR"/svn/.metadata "$GIT_DIR"/ && - rmdir "$GIT_DIR"/svn && + rm -rf "$GIT_DIR"/svn && git update-ref refs/heads/git-svn-HEAD refs/${remotes_git_svn} && git update-ref refs/heads/svn-HEAD refs/${remotes_git_svn} && git update-ref -d refs/${remotes_git_svn} refs/${remotes_git_svn} @@ -56,7 +54,15 @@ test_expect_success 'initialize a multi-repository repo' ' git config --add svn-remote.svn.fetch "branches/b:refs/remotes/b" && for i in tags/0.1 tags/0.2 tags/0.3; do git config --add svn-remote.svn.fetch \ - $i:refs/remotes/$i || exit 1; done + $i:refs/remotes/$i || exit 1; done && + git config --get-all svn-remote.svn.fetch > fetch.out && + grep "^trunk:refs/remotes/trunk$" fetch.out && + grep "^branches/a:refs/remotes/a$" fetch.out && + grep "^branches/b:refs/remotes/b$" fetch.out && + grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out && + grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out && + grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out && + grep "^:refs/${remotes_git_svn}" fetch.out ' # refs should all be different, but the trees should all be the same: @@ -79,36 +85,36 @@ test_expect_success 'migrate --minimize on old inited layout' ' rm -rf "$GIT_DIR"/svn && for i in `cat fetch.out`; do path=`expr $i : "\([^:]*\):.*$"` - ref=`expr $i : "[^:]*:refs/remotes/\(.*\)$"` + ref=`expr $i : "[^:]*:\(refs/remotes/.*\)$"` if test -z "$ref"; then continue; fi if test -n "$path"; then path="/$path"; fi ( mkdir -p "$GIT_DIR"/svn/$ref/info/ && echo "$svnrepo"$path > "$GIT_DIR"/svn/$ref/info/url ) || exit 1; done && git svn migrate --minimize && - test -z "`git config -l |grep -v "^svn-remote\.git-svn\."`" && + test -z "`git config -l | grep "^svn-remote\.git-svn\."`" && git config --get-all svn-remote.svn.fetch > fetch.out && grep "^trunk:refs/remotes/trunk$" fetch.out && grep "^branches/a:refs/remotes/a$" fetch.out && grep "^branches/b:refs/remotes/b$" fetch.out && grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out && grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out && - grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out + grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out && grep "^:refs/${remotes_git_svn}" fetch.out ' test_expect_success ".rev_db auto-converted to .rev_map.UUID" ' git svn fetch -i trunk && - test -z "$(ls "$GIT_DIR"/svn/trunk/.rev_db.* 2>/dev/null)" && - expect="$(ls "$GIT_DIR"/svn/trunk/.rev_map.*)" && + test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" && + expect="$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_map.*)" && test -n "$expect" && rev_db="$(echo $expect | sed -e "s,_map,_db,")" && convert_to_rev_db "$expect" "$rev_db" && rm -f "$expect" && test -f "$rev_db" && git svn fetch -i trunk && - test -z "$(ls "$GIT_DIR"/svn/trunk/.rev_db.* 2>/dev/null)" && - test ! -e "$GIT_DIR"/svn/trunk/.rev_db && + test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" && + test ! -e "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db && test -f "$expect" ' diff --git a/t/t9120-git-svn-clone-with-percent-escapes.sh b/t/t9120-git-svn-clone-with-percent-escapes.sh index f159ab689b..9d9ebd533c 100755 --- a/t/t9120-git-svn-clone-with-percent-escapes.sh +++ b/t/t9120-git-svn-clone-with-percent-escapes.sh @@ -10,6 +10,10 @@ test_expect_success 'setup svnrepo' ' mkdir project project/trunk project/branches project/tags && echo foo > project/trunk/foo && svn_cmd import -m "$test_description" project "$svnrepo/pr ject" && + svn_cmd cp -m "branch" "$svnrepo/pr ject/trunk" \ + "$svnrepo/pr ject/branches/b" && + svn_cmd cp -m "tag" "$svnrepo/pr ject/trunk" \ + "$svnrepo/pr ject/tags/v1" && rm -rf project && start_httpd ' @@ -21,6 +25,54 @@ test_expect_success 'test clone with percent escapes' ' cd .. ' +# SVN works either way, so should we... + +test_expect_success 'svn checkout with percent escapes' ' + svn_cmd checkout "$svnrepo/pr%20ject" svn.percent && + svn_cmd checkout "$svnrepo/pr%20ject/trunk" svn.percent.trunk +' + +test_expect_success 'svn checkout with space' ' + svn_cmd checkout "$svnrepo/pr ject" svn.space && + svn_cmd checkout "$svnrepo/pr ject/trunk" svn.space.trunk +' + +test_expect_success 'test clone trunk with percent escapes and minimize-url' ' + git svn clone --minimize-url "$svnrepo/pr%20ject/trunk" minimize && + ( + cd minimize && + git rev-parse refs/${remotes_git_svn} + ) +' + +test_expect_success 'test clone trunk with percent escapes' ' + git svn clone "$svnrepo/pr%20ject/trunk" trunk && + ( + cd trunk && + git rev-parse refs/${remotes_git_svn} + ) +' + +test_expect_success 'test clone --stdlayout with percent escapes' ' + git svn clone --stdlayout "$svnrepo/pr%20ject" percent && + ( + cd percent && + git rev-parse refs/remotes/trunk^0 && + git rev-parse refs/remotes/b^0 && + git rev-parse refs/remotes/tags/v1^0 + ) +' + +test_expect_success 'test clone -s with unescaped space' ' + git svn clone -s "$svnrepo/pr ject" space && + ( + cd space && + git rev-parse refs/remotes/trunk^0 && + git rev-parse refs/remotes/b^0 && + git rev-parse refs/remotes/tags/v1^0 + ) +' + stop_httpd test_done diff --git a/t/t9135-git-svn-moved-branch-empty-file.sh b/t/t9135-git-svn-moved-branch-empty-file.sh index 03705fa4ce..5280e5f1e4 100755 --- a/t/t9135-git-svn-moved-branch-empty-file.sh +++ b/t/t9135-git-svn-moved-branch-empty-file.sh @@ -10,7 +10,12 @@ test_expect_success 'load svn dumpfile' ' test_expect_success 'clone using git svn' 'git svn clone -s "$svnrepo" x' test_expect_success 'test that b1 exists and is empty' ' - (cd x && test -f b1 && ! test -s b1) + ( + cd x && + git reset --hard branch-c && + test -f b1 && + ! test -s b1 + ) ' test_done diff --git a/t/t9143-git-svn-gc.sh b/t/t9143-git-svn-gc.sh index f2ba2d1da3..99f69c6a0b 100755 --- a/t/t9143-git-svn-gc.sh +++ b/t/t9143-git-svn-gc.sh @@ -28,26 +28,26 @@ test_expect_success 'Setup repo' 'git svn init "$svnrepo"' test_expect_success 'Fetch repo' 'git svn fetch' test_expect_success 'make backup copy of unhandled.log' ' - cp .git/svn/git-svn/unhandled.log tmp + cp .git/svn/refs/remotes/git-svn/unhandled.log tmp ' -test_expect_success 'create leftover index' '> .git/svn/git-svn/index' +test_expect_success 'create leftover index' '> .git/svn/refs/remotes/git-svn/index' test_expect_success 'git svn gc runs' 'git svn gc' -test_expect_success 'git svn index removed' '! test -f .git/svn/git-svn/index' +test_expect_success 'git svn index removed' '! test -f .git/svn/refs/remotes/git-svn/index' if perl -MCompress::Zlib -e 0 2>/dev/null then test_expect_success 'git svn gc produces a valid gzip file' ' - gunzip .git/svn/git-svn/unhandled.log.gz + gunzip .git/svn/refs/remotes/git-svn/unhandled.log.gz ' else say "Perl Compress::Zlib unavailable, skipping gunzip test" fi test_expect_success 'git svn gc does not change unhandled.log files' ' - test_cmp .git/svn/git-svn/unhandled.log tmp/unhandled.log + test_cmp .git/svn/refs/remotes/git-svn/unhandled.log tmp/unhandled.log ' test_done diff --git a/t/t9144-git-svn-old-rev_map.sh b/t/t9144-git-svn-old-rev_map.sh new file mode 100755 index 0000000000..7600a35cd4 --- /dev/null +++ b/t/t9144-git-svn-old-rev_map.sh @@ -0,0 +1,31 @@ +#!/bin/sh +# +# Copyright (c) 2009 Eric Wong + +test_description='git svn old rev_map preservd' +. ./lib-git-svn.sh + +test_expect_success 'setup test repository with old layout' ' + mkdir i && + (cd i && > a) && + svn_cmd import -m- i "$svnrepo" && + git svn init "$svnrepo" && + git svn fetch && + test -d .git/svn/refs/remotes/git-svn/ && + ! test -e .git/svn/git-svn/ && + mv .git/svn/refs/remotes/git-svn .git/svn/ && + rm -r .git/svn/refs +' + +test_expect_success 'old layout continues to work' ' + svn_cmd import -m- i "$svnrepo/b" && + git svn rebase && + echo a >> b/a && + git add b/a && + git commit -m- -a && + git svn dcommit && + ! test -d .git/svn/refs/ && + test -e .git/svn/git-svn/ +' + +test_done diff --git a/t/t9145-git-svn-master-branch.sh b/t/t9145-git-svn-master-branch.sh new file mode 100755 index 0000000000..16852d26ae --- /dev/null +++ b/t/t9145-git-svn-master-branch.sh @@ -0,0 +1,25 @@ +#!/bin/sh +# +# Copyright (c) 2009 Eric Wong +# +test_description='git svn initial master branch is "trunk" if possible' +. ./lib-git-svn.sh + +test_expect_success 'setup test repository' ' + mkdir i && + > i/a && + svn_cmd import -m trunk i "$svnrepo/trunk" && + svn_cmd import -m b/a i "$svnrepo/branches/a" && + svn_cmd import -m b/b i "$svnrepo/branches/b" +' + +test_expect_success 'git svn clone --stdlayout sets up trunk as master' ' + git svn clone -s "$svnrepo" g && + ( + cd g && + test x`git rev-parse --verify refs/remotes/trunk^0` = \ + x`git rev-parse --verify refs/heads/master^0` + ) +' + +test_done diff --git a/t/test-lib.sh b/t/test-lib.sh index 5fdc5d94a2..a5b8d03db0 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -114,6 +114,9 @@ do valgrind=t; verbose=t; shift ;; --tee) shift ;; # was handled already + --root=*) + root=$(expr "z$1" : 'z[^=]*=\(.*\)') + shift ;; *) echo "error: unknown test option '$1'" >&2; exit 1 ;; esac @@ -645,7 +648,12 @@ fi # Test repository test="trash directory.$(basename "$0" .sh)" -test ! -z "$debug" || remove_trash="$TEST_DIRECTORY/$test" +test -n "$root" && test="$root/$test" +case "$test" in +/*) TRASH_DIRECTORY="$test" ;; + *) TRASH_DIRECTORY="$TEST_DIRECTORY/$test" ;; +esac +test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY rm -fr "$test" || { GIT_EXIT_OK=t echo >&5 "FATAL: Cannot prepare test area" diff --git a/transport.c b/transport.c index de0d5874a3..faee154c38 100644 --- a/transport.c +++ b/transport.c @@ -396,7 +396,6 @@ static int curl_transport_push(struct transport *transport, int refspec_nr, cons { const char **argv; int argc; - int err; if (flags & TRANSPORT_PUSH_MIRROR) return error("http transport does not support mirror mode"); @@ -416,20 +415,7 @@ static int curl_transport_push(struct transport *transport, int refspec_nr, cons while (refspec_nr--) argv[argc++] = *refspec++; argv[argc] = NULL; - err = run_command_v_opt(argv, RUN_GIT_CMD); - switch (err) { - case -ERR_RUN_COMMAND_FORK: - error("unable to fork for %s", argv[0]); - case -ERR_RUN_COMMAND_EXEC: - error("unable to exec %s", argv[0]); - break; - case -ERR_RUN_COMMAND_WAITPID: - case -ERR_RUN_COMMAND_WAITPID_WRONG_PID: - case -ERR_RUN_COMMAND_WAITPID_SIGNAL: - case -ERR_RUN_COMMAND_WAITPID_NOEXIT: - error("%s died with strange error", argv[0]); - } - return !!err; + return !!run_command_v_opt(argv, RUN_GIT_CMD); } static struct ref *get_refs_via_curl(struct transport *transport, int for_push) @@ -681,6 +667,21 @@ static int fetch_refs_via_pack(struct transport *transport, return (refs ? 0 : -1); } +static int push_had_errors(struct ref *ref) +{ + for (; ref; ref = ref->next) { + switch (ref->status) { + case REF_STATUS_NONE: + case REF_STATUS_UPTODATE: + case REF_STATUS_OK: + break; + default: + return 1; + } + } + return 0; +} + static int refs_pushed(struct ref *ref) { for (; ref; ref = ref->next) { @@ -820,7 +821,7 @@ static int print_one_push_status(struct ref *ref, const char *dest, int count, i } static void print_push_status(const char *dest, struct ref *refs, - int verbose, int porcelain) + int verbose, int porcelain, int * nonfastforward) { struct ref *ref; int n = 0; @@ -835,11 +836,14 @@ static void print_push_status(const char *dest, struct ref *refs, if (ref->status == REF_STATUS_OK) n += print_one_push_status(ref, dest, n, porcelain); + *nonfastforward = 0; for (ref = refs; ref; ref = ref->next) { if (ref->status != REF_STATUS_NONE && ref->status != REF_STATUS_UPTODATE && ref->status != REF_STATUS_OK) n += print_one_push_status(ref, dest, n, porcelain); + if (ref->status == REF_STATUS_REJECT_NONFASTFORWARD) + *nonfastforward = 1; } } @@ -892,6 +896,7 @@ static int git_transport_push(struct transport *transport, struct ref *remote_re args.force_update = !!(flags & TRANSPORT_PUSH_FORCE); args.use_thin_pack = data->thin; args.verbose = !!(flags & TRANSPORT_PUSH_VERBOSE); + args.quiet = !!(flags & TRANSPORT_PUSH_QUIET); args.dry_run = !!(flags & TRANSPORT_PUSH_DRY_RUN); ret = send_pack(&args, data->fd, data->conn, remote_refs, @@ -997,7 +1002,8 @@ int transport_set_option(struct transport *transport, } int transport_push(struct transport *transport, - int refspec_nr, const char **refspec, int flags) + int refspec_nr, const char **refspec, int flags, + int * nonfastforward) { verify_remote_names(refspec_nr, refspec); @@ -1009,6 +1015,7 @@ int transport_push(struct transport *transport, struct ref *local_refs = get_local_heads(); int match_flags = MATCH_REFS_NONE; int verbose = flags & TRANSPORT_PUSH_VERBOSE; + int quiet = flags & TRANSPORT_PUSH_QUIET; int porcelain = flags & TRANSPORT_PUSH_PORCELAIN; int ret; @@ -1024,7 +1031,10 @@ int transport_push(struct transport *transport, ret = transport->push_refs(transport, remote_refs, flags); - print_push_status(transport->url, remote_refs, verbose | porcelain, porcelain); + if (!quiet || push_had_errors(remote_refs)) + print_push_status(transport->url, remote_refs, + verbose | porcelain, porcelain, + nonfastforward); if (!(flags & TRANSPORT_PUSH_DRY_RUN)) { struct ref *ref; diff --git a/transport.h b/transport.h index 51b539778c..171a01c7a3 100644 --- a/transport.h +++ b/transport.h @@ -36,6 +36,7 @@ struct transport { #define TRANSPORT_PUSH_MIRROR 8 #define TRANSPORT_PUSH_VERBOSE 16 #define TRANSPORT_PUSH_PORCELAIN 32 +#define TRANSPORT_PUSH_QUIET 64 /* Returns a transport suitable for the url */ struct transport *transport_get(struct remote *, const char *); @@ -68,7 +69,8 @@ int transport_set_option(struct transport *transport, const char *name, const char *value); int transport_push(struct transport *connection, - int refspec_nr, const char **refspec, int flags); + int refspec_nr, const char **refspec, int flags, + int * nonfastforward); const struct ref *transport_get_remote_refs(struct transport *transport); diff --git a/unpack-trees.h b/unpack-trees.h index 1e0e2325f1..d19df44f40 100644 --- a/unpack-trees.h +++ b/unpack-trees.h @@ -17,18 +17,18 @@ struct unpack_trees_error_msgs { }; struct unpack_trees_options { - unsigned int reset:1, - merge:1, - update:1, - index_only:1, - nontrivial_merge:1, - trivial_merges_only:1, - verbose_update:1, - aggressive:1, - skip_unmerged:1, - initial_checkout:1, - diff_index_cached:1, - gently:1; + unsigned int reset, + merge, + update, + index_only, + nontrivial_merge, + trivial_merges_only, + verbose_update, + aggressive, + skip_unmerged, + initial_checkout, + diff_index_cached, + gently; const char *prefix; int pos; struct dir_struct *dir; diff --git a/upload-pack.c b/upload-pack.c index 841ebb534a..f7d308a411 100644 --- a/upload-pack.c +++ b/upload-pack.c @@ -29,6 +29,7 @@ static unsigned long oldest_have; static int multi_ack, nr_our_refs; static int use_thin_pack, use_ofs_delta, use_include_tag; static int no_progress, daemon_mode; +static int shallow_nr; static struct object_array have_obj; static struct object_array want_obj; static unsigned int timeout; @@ -107,8 +108,6 @@ static int do_rev_list(int fd, void *create_full_pack) struct rev_info revs; pack_pipe = fdopen(fd, "w"); - if (create_full_pack) - use_thin_pack = 0; /* no point doing it */ init_revisions(&revs, NULL); revs.tag_objects = 1; revs.tree_objects = 1; @@ -155,13 +154,21 @@ static void create_pack_file(void) const char *argv[10]; int arg = 0; - rev_list.proc = do_rev_list; - /* .data is just a boolean: any non-NULL value will do */ - rev_list.data = create_full_pack ? &rev_list : NULL; - if (start_async(&rev_list)) - die("git upload-pack: unable to fork git-rev-list"); + if (shallow_nr) { + rev_list.proc = do_rev_list; + rev_list.data = 0; + if (start_async(&rev_list)) + die("git upload-pack: unable to fork git-rev-list"); + argv[arg++] = "pack-objects"; + } else { + argv[arg++] = "pack-objects"; + argv[arg++] = "--revs"; + if (create_full_pack) + argv[arg++] = "--all"; + else if (use_thin_pack) + argv[arg++] = "--thin"; + } - argv[arg++] = "pack-objects"; argv[arg++] = "--stdout"; if (!no_progress) argv[arg++] = "--progress"; @@ -172,7 +179,7 @@ static void create_pack_file(void) argv[arg++] = NULL; memset(&pack_objects, 0, sizeof(pack_objects)); - pack_objects.in = rev_list.out; /* start_command closes it */ + pack_objects.in = shallow_nr ? rev_list.out : -1; pack_objects.out = -1; pack_objects.err = -1; pack_objects.git_cmd = 1; @@ -181,6 +188,24 @@ static void create_pack_file(void) if (start_command(&pack_objects)) die("git upload-pack: unable to fork git-pack-objects"); + /* pass on revisions we (don't) want */ + if (!shallow_nr) { + FILE *pipe_fd = fdopen(pack_objects.in, "w"); + if (!create_full_pack) { + int i; + for (i = 0; i < want_obj.nr; i++) + fprintf(pipe_fd, "%s\n", sha1_to_hex(want_obj.objects[i].item->sha1)); + fprintf(pipe_fd, "--not\n"); + for (i = 0; i < have_obj.nr; i++) + fprintf(pipe_fd, "%s\n", sha1_to_hex(have_obj.objects[i].item->sha1)); + } + + fprintf(pipe_fd, "\n"); + fflush(pipe_fd); + fclose(pipe_fd); + } + + /* We read from pack_objects.err to capture stderr output for * progress bar, and pack_objects.out to capture the pack data. */ @@ -276,7 +301,7 @@ static void create_pack_file(void) error("git upload-pack: git-pack-objects died with error."); goto fail; } - if (finish_async(&rev_list)) + if (shallow_nr && finish_async(&rev_list)) goto fail; /* error was already reported */ /* flush the data */ @@ -451,6 +476,7 @@ static void receive_needs(void) static char line[1000]; int len, depth = 0; + shallow_nr = 0; if (debug_fd) write_in_full(debug_fd, "#S\n", 3); for (;;) { @@ -538,6 +564,7 @@ static void receive_needs(void) packet_write(1, "shallow %s", sha1_to_hex(object->sha1)); register_shallow(object->sha1); + shallow_nr++; } result = result->next; } @@ -571,6 +598,8 @@ static void receive_needs(void) for (i = 0; i < shallows.nr; i++) register_shallow(shallows.objects[i].item->sha1); } + + shallow_nr += shallows.nr; free(shallows.objects); } |
