357 files changed, 12016 insertions, 2630 deletions

diff --git a/.gitignore b/.gitignore
index 8df8f88bea..dbf1b90c63 100644
--- a/.gitignore
+++ b/.gitignore
@@ -155,7 +155,9 @@
 /git-write-tree
 /git-core-*/?*
 /gitk-git/gitk-wish
+/gitweb/GITWEB-BUILD-OPTIONS
 /gitweb/gitweb.cgi
+/gitweb/gitweb.min.*
 /test-chmtime
 /test-ctype
 /test-date
@@ -177,6 +179,7 @@
 *.exe
 *.[aos]
 *.py[co]
+.depend/
 *+
 /config.mak
 /autom4te.cache
diff --git a/Documentation/RelNotes-1.7.1.1.txt b/Documentation/RelNotes-1.7.1.1.txt
new file mode 100644
index 0000000000..e0386a43f0
--- /dev/null
+++ b/Documentation/RelNotes-1.7.1.1.txt
@@ -0,0 +1,67 @@
+Git v1.7.1.1 Release Notes (draft)
+==================================
+
+Fixes since v1.7.1
+------------------
+
+ * Authentication over http transport can now be made lazily, in that the
+   request can first go to a URL without username, get a 401 response and
+   then the client will ask for the username to use.
+
+ * We used to mistakenly think "../work" is a subdirectory of the current
+   directory when we are in "../work-xyz".
+
+ * The attribute mechanism now allows an entry that uses an attribute
+   macro that set/unset one attribute, immediately followed by an
+   overriding setting; this makes attribute macros much easier to use.
+
+ * We didn't recognize timezone "Z" as a synonym for "UTC" (75b37e70).
+
+ * "git am -3" did not show diagnosis when the patch in the message was corrupt.
+
+ * After "git apply --whitespace=fix" removed trailing blank lines in an
+   patch in a patch series, it failed to apply later patches that depend
+   on the presense of such blank lines.
+
+ * "git bundle --stdin" segfaulted.
+
+ * "git checkout" and "git rebase" overwrote paths that are marked "assume
+   unchanged".
+
+ * "git describe" did not tie-break tags that point at the same commit
+   correctly; newer ones are preferred by paying attention to the
+   tagger date now.
+
+ * "git diff" used to tell underlying xdiff machinery to work very hard to
+   minimize the output, but this often was spending too many extra cycles
+   for very little gain.
+
+ * "git diff --color" did not paint extended diff headers per line
+   (i.e. the coloring escape sequence didn't end at the end of line),
+   which confused "less -R".
+
+ * "git fetch" over HTTP verifies the downloaded packfiles more robustly.
+
+ * The memory usage by "git index-pack" (run during "git fetch" and "git
+   push") got leaner.
+
+ * "GIT_DIR=foo.git git init --bare bar.git" created foo.git instead of bar.git.
+
+ * "git log --abbrev=$num --format='%h' ignored --abbrev=$num.
+
+ * "git pull" accepted "--dry-run", gave it to underlying "git fetch" but
+   ignored the option itself, resulting in a bogus attempt to merge
+   unrelated commit.
+
+ * "git send-email" lacked a way to specify the domainname used in the
+   EHLO/HELO exchange, causing rejected connection from picky servers.
+   It learned --smtp-domain option to solve this issue.
+
+ * "git stash" incorrectly lost paths in the working tree that were
+   previously removed from the index.
+
+ * "git status" stopped refreshing the index by mistake in 1.7.1.
+
+ * "git status" showed excess "hints" even when advice.statusHints is set to false.
+
+And other minor fixes and documentation updates.
diff --git a/Documentation/RelNotes-1.7.1.txt b/Documentation/RelNotes-1.7.1.txt
new file mode 100644
index 0000000000..9d89fedb36
--- /dev/null
+++ b/Documentation/RelNotes-1.7.1.txt
@@ -0,0 +1,89 @@
+Git v1.7.1 Release Notes
+========================
+
+Updates since v1.7.0
+--------------------
+
+ * Eric Raymond is the maintainer of updated CIAbot scripts, in contrib/.
+
+ * gitk updates.
+
+ * Some commands (e.g. svn and http interfaces) that interactively ask
+   for a password can be told to use an external program given via
+   GIT_ASKPASS.
+
+ * Conflict markers that lead the common ancestor in diff3-style output
+   now have a label, which hopefully would help third-party tools that
+   expect one.
+
+ * Comes with an updated bash-completion script.
+
+ * "git am" learned "--keep-cr" option to handle inputs that are
+   a mixture of changes to files with and without CRLF line endings.
+
+ * "git cvsimport" learned -R option to leave revision mapping between
+   CVS revisions and resulting git commits.
+
+ * "git diff --submodule" notices and describes dirty submodules.
+
+ * "git for-each-ref" learned %(symref), %(symref:short) and %(flag)
+   tokens.
+
+ * "git hash-object --stdin-paths" can take "--no-filters" option now.
+
+ * "git init" can be told to look at init.templatedir configuration
+   variable (obviously that has to come from either /etc/gitconfig or
+   $HOME/.gitconfig).
+
+ * "git grep" learned "--no-index" option, to search inside contents that
+   are not managed by git.
+
+ * "git grep" learned --color=auto/always/never.
+
+ * "git grep" learned to paint filename and line-number in colors.
+
+ * "git log -p --first-parent -m" shows one-parent diff for merge
+   commits, instead of showing combined diff.
+
+ * "git merge-file" learned to use custom conflict marker size and also
+   to use the "union merge" behaviour.
+
+ * "git notes" command has been rewritten in C and learned many commands
+   and features to help you carry notes forward across rebases and amends.
+
+ * "git request-pull" identifies the commit the request is relative to in
+   a more readable way.
+
+ * "git reset" learned "--keep" option that lets you discard commits
+   near the tip while preserving your local changes in a way similar
+   to how "git checkout branch" does.
+
+ * "git status" notices and describes dirty submodules.
+
+ * "git svn" should work better when interacting with repositories
+   with CRLF line endings.
+
+ * "git imap-send" learned to support CRAM-MD5 authentication.
+
+ * "gitweb" installation procedure can use "minified" js/css files
+   better.
+
+ * Various documentation updates.
+
+Fixes since v1.7.0
+------------------
+
+All of the fixes in v1.7.0.X maintenance series are included in this
+release, unless otherwise noted.
+
+ * "git add frotz/nitfol" did not complain when the entire frotz/ directory
+   was ignored.
+
+ * "git diff --stat" used "int" to count the size of differences,
+   which could result in overflowing.
+
+ * "git rev-list --pretty=oneline" didn't terminate a record with LF for
+   commits without any message.
+
+ * "git rev-list --abbrev-commit" defaulted to 40-byte abbreviations, unlike
+   newer tools in the git toolset.
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index c686f8646b..eb53e0636e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -41,6 +41,7 @@ Checklist (and a short version for the impatient):
 	  maintainer (gitster@pobox.com) if (and only if) the patch
 	  is ready for inclusion. If you use git-send-email(1),
 	  please test it first by sending email to yourself.
+	- see below for instructions specific to your mailer
 
 Long version:
 
@@ -53,6 +54,34 @@ But the patch submission requirements are a lot more relaxed
 here on the technical/contents front, because the core GIT is
 thousand times smaller ;-).  So here is only the relevant bits.
 
+(0) Decide what to base your work on.
+
+In general, always base your work on the oldest branch that your
+change is relevant to.
+
+ - A bugfix should be based on 'maint' in general. If the bug is not
+   present in 'maint', base it on 'master'. For a bug that's not yet
+   in 'master', find the topic that introduces the regression, and
+   base your work on the tip of the topic.
+
+ - A new feature should be based on 'master' in general. If the new
+   feature depends on a topic that is in 'pu', but not in 'master',
+   base your work on the tip of that topic.
+
+ - Corrections and enhancements to a topic not yet in 'master' should
+   be based on the tip of that topic. If the topic has not been merged
+   to 'next', it's alright to add a note to squash minor corrections
+   into the series.
+
+ - In the exceptional case that a new feature depends on several topics
+   not in 'master', start working on 'next' or 'pu' privately and send
+   out patches for discussion. Before the final merge, you may have to
+   wait until some of the dependent topics graduate to 'master', and
+   rebase your work.
+
+To find the tip of a topic branch, run "git log --first-parent
+master..pu" and look for the merge commit. The second parent of this
+commit is the tip of the topic branch.
 
 (1) Make separate commits for logically separate changes.
 
@@ -170,17 +199,16 @@ patch, format it as "multipart/signed", not a text/plain message
 that starts with '-----BEGIN PGP SIGNED MESSAGE-----'.  That is
 not a text/plain, it's something else.
 
-Note that your maintainer does not necessarily read everything
-on the git mailing list.  If your patch is for discussion first,
-send it "To:" the mailing list, and optionally "cc:" him.  If it
-is trivially correct or after the list reached a consensus, send
-it "To:" the maintainer and optionally "cc:" the list for
-inclusion.
-
-Also note that your maintainer does not actively involve himself in
-maintaining what are in contrib/ hierarchy.  When you send fixes and
-enhancements to them, do not forget to "cc: " the person who primarily
-worked on that hierarchy in contrib/.
+Unless your patch is a very trivial and an obviously correct one,
+first send it with "To:" set to the mailing list, with "cc:" listing
+people who are involved in the area you are touching (the output from
+"git blame $path" and "git shortlog --no-merges $path" would help to
+identify them), to solicit comments and reviews.  After the list
+reached a consensus that it is a good idea to apply the patch, re-send
+it with "To:" set to the maintainer and optionally "cc:" the list for
+inclusion.  Do not forget to add trailers such as "Acked-by:",
+"Reviewed-by:" and "Tested-by:" after your "Signed-off-by:" line as
+necessary.
 
 
 (4) Sign your work
@@ -519,12 +547,28 @@ Gmail
 
 GMail does not appear to have any way to turn off line wrapping in the web
 interface, so this will mangle any emails that you send.  You can however
-use any IMAP email client to connect to the google imap server, and forward
-the emails through that.  Just make sure to disable line wrapping in that
-email client.  Alternatively, use "git send-email" instead.
+use "git send-email" and send your patches through the GMail SMTP server, or
+use any IMAP email client to connect to the google IMAP server and forward
+the emails through that.
+
+To use "git send-email" and send your patches through the GMail SMTP server,
+edit ~/.gitconfig to specify your account settings:
+
+[sendemail]
+	smtpencryption = tls
+	smtpserver = smtp.gmail.com
+	smtpuser = user@gmail.com
+	smtppass = p4ssw0rd
+	smtpserverport = 587
 
-Submitting properly formatted patches via Gmail is simple now that
-IMAP support is available. First, edit your ~/.gitconfig to specify your
+Once your commits are ready to be sent to the mailing list, run the
+following commands:
+
+  $ git format-patch --cover-letter -M origin/master -o outgoing/
+  $ edit outgoing/0000-*
+  $ git send-email outgoing/*
+
+To submit using the IMAP interface, first, edit your ~/.gitconfig to specify your
 account settings:
 
 [imap]
@@ -538,14 +582,12 @@ account settings:
 You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error
 that the "Folder doesn't exist".
 
-Next, ensure that your Gmail settings are correct. In "Settings" the
-"Use Unicode (UTF-8) encoding for outgoing messages" should be checked.
-
-Once your commits are ready to send to the mailing list, run the following
-command to send the patch emails to your Gmail Drafts folder.
+Once your commits are ready to be sent to the mailing list, run the
+following commands:
 
-	$ git format-patch -M --stdout origin/master | git imap-send
+  $ git format-patch --cover-letter -M --stdout origin/master | git imap-send
 
-Go to your Gmail account, open the Drafts folder, find the patch email, fill
-in the To: and CC: fields and send away!
+Just make sure to disable line wrapping in the email client (GMail web
+interface will line wrap no matter what, so you need to use a real
+IMAP client).
 
diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt
index d8205691c6..16e3c68576 100644
--- a/Documentation/blame-options.txt
+++ b/Documentation/blame-options.txt
@@ -90,9 +90,9 @@ of lines before or after the line given by <start>.
 	running extra passes of inspection.
 +
 <num> is optional but it is the lower bound on the number of
-alphanumeric characters that git must detect as moving
+alphanumeric characters that git must detect as moving/copying
 within a file for it to associate those lines with the parent
-commit.
+commit. The default value is 20.
 
 -C|<num>|::
 	In addition to `-M`, detect lines moved or copied from other
@@ -105,9 +105,11 @@ commit.
 	looks for copies from other files in any commit.
 +
 <num> is optional but it is the lower bound on the number of
-alphanumeric characters that git must detect as moving
+alphanumeric characters that git must detect as moving/copying
 between files for it to associate those lines with the parent
-commit.
+commit. And the default value is 40. If there are more than one
+`-C` options given, the <num> argument of the last `-C` will
+take effect.
 
 -h::
 --help::
diff --git a/Documentation/config.txt b/Documentation/config.txt
index f6ddd35c01..ae174c99db 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -518,16 +518,12 @@ check that makes sure that existing object files will not get overwritten.
 
 core.notesRef::
 	When showing commit messages, also show notes which are stored in
-	the given ref.  This ref is expected to contain files named
-	after the full SHA-1 of the commit they annotate.
+	the given ref.  The ref must be fully qualified.  If the given
+	ref does not exist, it is not an error but means that no
+	notes should be printed.
 +
-If such a file exists in the given ref, the referenced blob is read, and
-appended to the commit message, separated by a "Notes:" line.  If the
-given ref itself does not exist, it is not an error, but means that no
-notes should be printed.
-+
-This setting defaults to "refs/notes/commits", and can be overridden by
-the `GIT_NOTES_REF` environment variable.
+This setting defaults to "refs/notes/commits", and it can be overridden by
+the 'GIT_NOTES_REF' environment variable.  See linkgit:git-notes[1].
 
 core.sparseCheckout::
 	Enable "sparse checkout" feature. See section "Sparse checkout" in
@@ -555,6 +551,13 @@ it will be treated as a shell command.  For example, defining
 executed from the top-level directory of a repository, which may
 not necessarily be the current directory.
 
+am.keepcr::
+	If true, git-am will call git-mailsplit for patches in mbox format
+	with parameter '--keep-cr'. In this case git-mailsplit will
+	not remove `\r` from lines ending with `\r\n`. Can be overrriden
+	by giving '--no-keep-cr' from the command line.
+	See linkgit:git-am[1], linkgit:git-mailsplit[1].
+
 apply.ignorewhitespace::
 	When set to 'change', tells 'git apply' to ignore changes in
 	whitespace, in the same way as the '--ignore-space-change'
@@ -683,9 +686,29 @@ color.grep::
 	`never`), never.  When set to `true` or `auto`, use color only
 	when the output is written to the terminal.  Defaults to `false`.
 
-color.grep.match::
-	Use customized color for matches.  The value of this variable
-	may be specified as in color.branch.<slot>.
+color.grep.<slot>::
+	Use customized color for grep colorization.  `<slot>` specifies which
+	part of the line to use the specified color, and is one of
++
+--
+`context`;;
+	non-matching text in context lines (when using `-A`, `-B`, or `-C`)
+`filename`;;
+	filename prefix (when not using `-h`)
+`function`;;
+	function name lines (when using `-p`)
+`linenumber`;;
+	line number prefix (when using `-n`)
+`match`;;
+	matching text
+`selected`;;
+	non-matching text in selected lines
+`separator`;;
+	separators between fields on a line (`:`, `-`, and `=`)
+	and between hunks (`--`)
+--
++
+The values of these variables may be specified as in color.branch.<slot>.
 
 color.interactive::
 	When set to `always`, always use colors for interactive prompts
@@ -1203,6 +1226,10 @@ imap::
 	The configuration variables in the 'imap' section are described
 	in linkgit:git-imap-send[1].
 
+init.templatedir::
+	Specify the directory from which templates will be copied.
+	(See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
+
 instaweb.browser::
 	Specify the program that will be used to browse your working
 	repository in gitweb. See linkgit:git-instaweb[1].
@@ -1303,6 +1330,53 @@ mergetool.keepTemporaries::
 mergetool.prompt::
 	Prompt before each invocation of the merge resolution program.
 
+notes.displayRef::
+	The (fully qualified) refname from which to show notes when
+	showing commit messages.  The value of this variable can be set
+	to a glob, in which case notes from all matching refs will be
+	shown.  You may also specify this configuration variable
+	several times.  A warning will be issued for refs that do not
+	exist, but a glob that does not match any refs is silently
+	ignored.
++
+This setting can be overridden with the `GIT_NOTES_DISPLAY_REF`
+environment variable, which must be a colon separated list of refs or
+globs.
++
+The effective value of "core.notesRef" (possibly overridden by
+GIT_NOTES_REF) is also implicitly added to the list of refs to be
+displayed.
+
+notes.rewrite.<command>::
+	When rewriting commits with <command> (currently `amend` or
+	`rebase`) and this variable is set to `true`, git
+	automatically copies your notes from the original to the
+	rewritten commit.  Defaults to `true`, but see
+	"notes.rewriteRef" below.
+
+notes.rewriteMode::
+	When copying notes during a rewrite (see the
+	"notes.rewrite.<command>" option), determines what to do if
+	the target commit already has a note.  Must be one of
+	`overwrite`, `concatenate`, or `ignore`.  Defaults to
+	`concatenate`.
++
+This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
+environment variable.
+
+notes.rewriteRef::
+	When copying notes during a rewrite, specifies the (fully
+	qualified) ref whose notes should be copied.  The ref may be a
+	glob, in which case notes in all matching refs will be copied.
+	You may also specify this configuration several times.
++
+Does not have a default value; you must configure this variable to
+enable note rewriting.
++
+This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
+environment variable, which must be a colon separated list of refs or
+globs.
+
 pack.window::
 	The size of the window used by linkgit:git-pack-objects[1] when no
 	window size is given on the command line. Defaults to 10.
@@ -1436,7 +1510,7 @@ receive.denyDeletes::
 	the ref. Use this to prevent such a ref deletion via a push.
 
 receive.denyCurrentBranch::
-	If set to true or "refuse", receive-pack will deny a ref update
+	If set to true or "refuse", git-receive-pack will deny a ref update
 	to the currently checked out branch of a non-bare repository.
 	Such a push is potentially dangerous because it brings the HEAD
 	out of sync with the index and working tree. If set to "warn",
@@ -1562,6 +1636,7 @@ sendemail.smtppass::
 sendemail.suppresscc::
 sendemail.suppressfrom::
 sendemail.to::
+sendemail.smtpdomain::
 sendemail.smtpserver::
 sendemail.smtpserverport::
 sendemail.smtpuser::
@@ -1601,6 +1676,13 @@ If this variable is not specified, it defaults to 'normal'.
 This variable can be overridden with the -u|--untracked-files option
 of linkgit:git-status[1] and linkgit:git-commit[1].
 
+status.submodulesummary::
+	Defaults to false.
+	If this is set to a non zero number or true (identical to -1 or an
+	unlimited number), the submodule summary will be enabled and a
+	summary of commits for modified submodules will be shown (see
+	--summary-limit option of linkgit:git-submodule[1]).
+
 tar.umask::
 	This variable can be used to restrict the permission bits of
 	tar archive entries.  The default is 0002, which turns off the
diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt
index 0f25ba7e38..8f9a2412fd 100644
--- a/Documentation/diff-generate-patch.txt
+++ b/Documentation/diff-generate-patch.txt
@@ -56,7 +56,8 @@ combined diff format
 
 "git-diff-tree", "git-diff-files" and "git-diff" can take '-c' or
 '--cc' option to produce 'combined diff'.  For showing a merge commit
-with "git log -p", this is the default format.
+with "git log -p", this is the default format; you can force showing
+full diff with the '-m' option.
 A 'combined diff' format looks like this:
 
 ------------
diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt
index a1191d647b..3070dddfe2 100644
--- a/Documentation/diff-options.txt
+++ b/Documentation/diff-options.txt
@@ -117,12 +117,14 @@ any of those replacements occurred.
 	option and lists the commits in that commit range like the 'summary'
 	option of linkgit:git-submodule[1] does.
 
---color::
+--color[=<when>]::
 	Show colored diff.
+	The value must be always (the default), never, or auto.
 
 --no-color::
 	Turn off colored diff, even when the configuration file
 	gives the default to color output.
+	Same as `--color=never`.
 
 --color-words[=<regex>]::
 	Show colored word diff, i.e., color words which have changed.
@@ -175,7 +177,14 @@ endif::git-format-patch[]
 	Break complete rewrite changes into pairs of delete and create.
 
 -M::
+ifndef::git-log[]
 	Detect renames.
+endif::git-log[]
+ifdef::git-log[]
+	If generating diffs, detect and report renames for each commit.
+	For following files across renames while traversing history, see
+	`--follow`.
+endif::git-log[]
 
 -C::
 	Detect copies as well as renames.  See also `--find-copies-harder`.
diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt
index 9310b650d3..e0ba8cc075 100644
--- a/Documentation/everyday.txt
+++ b/Documentation/everyday.txt
@@ -1,13 +1,8 @@
 Everyday GIT With 20 Commands Or So
 ===================================
 
-<<Basic Repository>> commands are needed by people who have a
-repository --- that is everybody, because every working tree of
-git is a repository.
-
-In addition, <<Individual Developer (Standalone)>> commands are
-essential for anybody who makes a commit, even for somebody who
-works alone.
+<<Individual Developer (Standalone)>> commands are essential for
+anybody who makes a commit, even for somebody who works alone.
 
 If you work with other people, you will need commands listed in
 the <<Individual Developer (Participant)>> section as well.
@@ -20,46 +15,6 @@ administrators who are responsible for the care and feeding
 of git repositories.
 
 
-Basic Repository[[Basic Repository]]
-------------------------------------
-
-Everybody uses these commands to maintain git repositories.
-
-  * linkgit:git-init[1] or linkgit:git-clone[1] to create a
-    new repository.
-
-  * linkgit:git-fsck[1] to check the repository for errors.
-
-  * linkgit:git-gc[1] to do common housekeeping tasks such as
-    repack and prune.
-
-Examples
-~~~~~~~~
-
-Check health and remove cruft.::
-+
-------------
-$ git fsck <1>
-$ git count-objects <2>
-$ git gc <3>
-------------
-+
-<1> running without `\--full` is usually cheap and assures the
-repository health reasonably well.
-<2> check how many loose objects there are and how much
-disk space is wasted by not repacking.
-<3> repacks the local repository and performs other housekeeping tasks.
-
-Repack a small project into single pack.::
-+
-------------
-$ git gc <1>
-------------
-+
-<1> pack all the objects reachable from the refs into one pack,
-then remove the other packs.
-
-
 Individual Developer (Standalone)[[Individual Developer (Standalone)]]
 ----------------------------------------------------------------------
 
@@ -67,6 +22,8 @@ A standalone individual developer does not exchange patches with
 other people, and works alone in a single repository, using the
 following commands.
 
+  * linkgit:git-init[1] to create a new repository.
+
   * linkgit:git-show-branch[1] to see where you are.
 
   * linkgit:git-log[1] to see what happened.
diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt
index fe716b2e42..044ec882cc 100644
--- a/Documentation/fetch-options.txt
+++ b/Documentation/fetch-options.txt
@@ -78,9 +78,16 @@ ifndef::git-pull[]
 -q::
 --quiet::
 	Pass --quiet to git-fetch-pack and silence any other internally
-	used git commands.
+	used git commands. Progress is not reported to the standard error
+	stream.
 
 -v::
 --verbose::
 	Be verbose.
 endif::git-pull[]
+
+--progress::
+	Progress status is reported on the standard error stream
+	by default when it is attached to a terminal, unless -q
+	is specified. This flag forces progress status even if the
+	standard error stream is not directed to a terminal.
diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt
index 51cbeb7032..74741a42f4 100644
--- a/Documentation/git-add.txt
+++ b/Documentation/git-add.txt
@@ -266,9 +266,9 @@ patch::
 
        y - stage this hunk
        n - do not stage this hunk
-       q - quit, do not stage this hunk nor any of the remaining ones
-       a - stage this and all the remaining hunks in the file
-       d - do not stage this hunk nor any of the remaining hunks in the file
+       q - quit; do not stage this hunk nor any of the remaining ones
+       a - stage this hunk and all later hunks in the file
+       d - do not stage this hunk nor any of the later hunks in the file
        g - select a hunk to go to
        / - search for a hunk matching the given regex
        j - leave this hunk undecided, see next undecided hunk
diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt
index 23864df8da..9e62f8778f 100644
--- a/Documentation/git-am.txt
+++ b/Documentation/git-am.txt
@@ -9,7 +9,7 @@ git-am - Apply a series of patches from a mailbox
 SYNOPSIS
 --------
 [verse]
-'git am' [--signoff] [--keep] [--utf8 | --no-utf8]
+'git am' [--signoff] [--keep] [--keep-cr | --no-keep-cr] [--utf8 | --no-utf8]
 	 [--3way] [--interactive] [--committer-date-is-author-date]
 	 [--ignore-date] [--ignore-space-change | --ignore-whitespace]
 	 [--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>]
@@ -39,6 +39,13 @@ OPTIONS
 --keep::
 	Pass `-k` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]).
 
+--keep-cr::
+--no-keep-cr::
+	With `--keep-cr`, call 'git mailsplit' (see linkgit:git-mailsplit[1])
+	with the same option, to prevent it from stripping CR at the end of
+	lines. `am.keepcr` configuration variable can be used to specify the
+	default behaviour.  `--no-keep-cr` is useful to override `am.keepcr`.
+
 -c::
 --scissors::
 	Remove everything in body before a scissors line (see
diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt
index 60fa684b1d..1940256930 100644
--- a/Documentation/git-branch.txt
+++ b/Documentation/git-branch.txt
@@ -8,7 +8,7 @@ git-branch - List, create, or delete branches
 SYNOPSIS
 --------
 [verse]
-'git branch' [--color | --no-color] [-r | -a]
+'git branch' [--color[=<when>] | --no-color] [-r | -a]
 	[-v [--abbrev=<length> | --no-abbrev]]
 	[(--merged | --no-merged | --contains) [<commit>]]
 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>]
@@ -88,12 +88,14 @@ OPTIONS
 -M::
 	Move/rename a branch even if the new branch name already exists.
 
---color::
+--color[=<when>]::
 	Color branches to highlight current, local, and remote branches.
+	The value must be always (the default), never, or auto.
 
 --no-color::
 	Turn off branch colors, even when the configuration file gives the
 	default to color output.
+	Same as `--color=never`.
 
 -r::
 	List or delete (if used with -d) the remote-tracking branches.
diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt
index 37c1810e3f..7146288ad6 100644
--- a/Documentation/git-checkout.txt
+++ b/Documentation/git-checkout.txt
@@ -15,33 +15,41 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-
-When <paths> are not given, this command switches branches by
-updating the index, working tree, and HEAD to reflect the specified
+Updates files in the working tree to match the version in the index
+or the specified tree.  If no paths are given, 'git checkout' will
+also update `HEAD` to set the specified branch as the current
 branch.
 
-If `-b` is given, a new branch is created and checked out, as if
-linkgit:git-branch[1] were called; in this case you can
-use the --track or --no-track options, which will be passed to `git
-branch`.  As a convenience, --track without `-b` implies branch
-creation; see the description of --track below.
-
-When <paths> or --patch are given, this command does *not* switch
-branches.  It updates the named paths in the working tree from
-the index file, or from a named <tree-ish> (most often a commit).  In
-this case, the `-b` and `--track` options are meaningless and giving
-either of them results in an error. The <tree-ish> argument can be
-used to specify a specific tree-ish (i.e. commit, tag or tree)
-to update the index for the given paths before updating the
-working tree.
-
-The index may contain unmerged entries after a failed merge.  By
-default, if you try to check out such an entry from the index, the
+'git checkout' [<branch>]::
+'git checkout' -b <new branch> [<start point>]::
+
+	This form switches branches by updating the index, working
+	tree, and HEAD to reflect the specified branch.
++
+If `-b` is given, a new branch is created as if linkgit:git-branch[1]
+were called and then checked out; in this case you can
+use the `--track` or `--no-track` options, which will be passed to
+'git branch'.  As a convenience, `--track` without `-b` implies branch
+creation; see the description of `--track` below.
+
+'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...::
+
+	When <paths> or `--patch` are given, 'git checkout' *not* switch
+	branches.  It updates the named paths in the working tree from
+	the index file or from a named <tree-ish> (most often a commit).  In
+	this case, the `-b` and `--track` options are meaningless and giving
+	either of them results in an error. The <tree-ish> argument can be
+	used to specify a specific tree-ish (i.e. commit, tag or tree)
+	to update the index for the given paths before updating the
+	working tree.
++
+The index may contain unmerged entries because of a previous failed merge.
+By default, if you try to check out such an entry from the index, the
 checkout operation will fail and nothing will be checked out.
-Using -f will ignore these unmerged entries.  The contents from a
+Using `-f` will ignore these unmerged entries.  The contents from a
 specific side of the merge can be checked out of the index by
-using --ours or --theirs.  With -m, changes made to the working tree
-file can be discarded to recreate the original conflicted merge result.
+using `--ours` or `--theirs`.  With `-m`, changes made to the working tree
+file can be discarded to re-create the original conflicted merge result.
 
 OPTIONS
 -------
@@ -136,6 +144,10 @@ edits from your current working tree.
 As a special case, the `"@\{-N\}"` syntax for the N-th last branch
 checks out the branch (instead of detaching).  You may also specify
 `-` which is synonymous with `"@\{-1\}"`.
++
+As a further special case, you may use `"A...B"` as a shortcut for the
+merge base of `A` and `B` if there is exactly one merge base. You can
+leave out at most one of `A` and `B`, in which case it defaults to `HEAD`.
 
 <new_branch>::
 	Name for the new branch.
diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt
index 78f4714da0..d71607a85d 100644
--- a/Documentation/git-cherry-pick.txt
+++ b/Documentation/git-cherry-pick.txt
@@ -7,7 +7,7 @@ git-cherry-pick - Apply the change introduced by an existing commit
 
 SYNOPSIS
 --------
-'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] <commit>
+'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] [--ff] <commit>
 
 DESCRIPTION
 -----------
@@ -70,6 +70,10 @@ effect to your index in a row.
 --signoff::
 	Add Signed-off-by line at the end of the commit message.
 
+--ff::
+	If the current HEAD is the same as the parent of the
+	cherry-pick'ed commit, then a fast forward to this commit will
+	be performed.
 
 Author
 ------
diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt
index d15cb17d78..dc7d3d17b1 100644
--- a/Documentation/git-clone.txt
+++ b/Documentation/git-clone.txt
@@ -102,7 +102,8 @@ objects from the source repository into a pack in the cloned repository.
 
 --verbose::
 -v::
-	Run verbosely.
+	Run verbosely. Does not affect the reporting of progress status
+	to the standard error stream.
 
 --progress::
 	Progress status is reported on the standard error stream
@@ -149,8 +150,7 @@ objects from the source repository into a pack in the cloned repository.
 
 --template=<template_directory>::
 	Specify the directory from which templates will be used;
-	if unset the templates are taken from the installation
-	defined default, typically `/usr/share/git-core/templates`.
+	(See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
 
 --depth <depth>::
 	Create a 'shallow' clone with a history truncated to the
diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt
index 64fb458b45..69eb86e450 100644
--- a/Documentation/git-commit.txt
+++ b/Documentation/git-commit.txt
@@ -95,10 +95,11 @@ OPTIONS
 	read the message from the standard input.
 
 --author=<author>::
-	Override the author name used in the commit.  You can use the
-	standard `A U Thor <author@example.com>` format.  Otherwise,
-	an existing commit that matches the given string and its author
-	name is used.
+	Override the commit author. Specify an explicit author using the
+	standard `A U Thor <author@example.com>` format. Otherwise <author>
+	is assumed to be a pattern and is used to search for an existing
+	commit by that author (i.e. rev-list --all -i --author=<author>);
+	the commit author is then copied from the first such commit found.
 
 --date=<date>::
 	Override the author date used in the commit.
diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt
index ddfcb3d143..8bcd875a67 100644
--- a/Documentation/git-cvsimport.txt
+++ b/Documentation/git-cvsimport.txt
@@ -13,7 +13,7 @@ SYNOPSIS
 	      [-A <author-conv-file>] [-p <options-for-cvsps>] [-P <file>]
 	      [-C <git_repository>] [-z <fuzz>] [-i] [-k] [-u] [-s <subst>]
 	      [-a] [-m] [-M <regex>] [-S <regex>] [-L <commitlimit>]
-	      [-r <remote>] [<CVS_module>]
+	      [-r <remote>] [-R] [<CVS_module>]
 
 
 DESCRIPTION
@@ -157,6 +157,22 @@ It is not recommended to use this feature if you intend to
 export changes back to CVS again later with
 'git cvsexportcommit'.
 
+-R::
+	Generate a `$GIT_DIR/cvs-revisions` file containing a mapping from CVS
+	revision numbers to newly-created Git commit IDs.  The generated file
+	will contain one line for each (filename, revision) pair imported;
+	each line will look like
++
+---------
+src/widget.c 1.1 1d862f173cdc7325b6fa6d2ae1cfd61fd1b512b7
+---------
++
+The revision data is appended to the file if it already exists, for use when
+doing incremental imports.
++
+This option may be useful if you have CVS revision numbers stored in commit
+messages, bug-tracking systems, email archives, and the like.
+
 -h::
 	Print a short usage message and exit.
 
diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt
index 9674f9de67..835fb7135b 100644
--- a/Documentation/git-format-patch.txt
+++ b/Documentation/git-format-patch.txt
@@ -18,7 +18,7 @@ SYNOPSIS
 		   [--in-reply-to=Message-Id] [--suffix=.<sfx>]
 		   [--ignore-if-in-upstream]
 		   [--subject-prefix=Subject-Prefix]
-		   [--cc=<email>]
+		   [--to=<email>] [--cc=<email>]
 		   [--cover-letter]
 		   [<common diff options>]
 		   [ <since> | <revision range> ]
@@ -162,6 +162,10 @@ will want to ensure that threading is disabled for `git send-email`.
 	allows for useful naming of a patch series, and can be
 	combined with the `--numbered` option.
 
+--to=<email>::
+	Add a `To:` header to the email headers. This is in addition
+	to any configured headers, and may be used multiple times.
+
 --cc=<email>::
 	Add a `Cc:` header to the email headers. This is in addition
 	to any configured headers, and may be used multiple times.
@@ -202,8 +206,8 @@ CONFIGURATION
 -------------
 You can specify extra mail header lines to be added to each message,
 defaults for the subject prefix and file suffix, number patches when
-outputting more than one patch, add "Cc:" headers, configure attachments,
-and sign off patches with configuration variables.
+outputting more than one patch, add "To" or "Cc:" headers, configure
+attachments, and sign off patches with configuration variables.
 
 ------------
 [format]
@@ -211,6 +215,7 @@ and sign off patches with configuration variables.
 	subjectprefix = CHANGE
 	suffix = .txt
 	numbered = auto
+	to = <email>
 	cc = <email>
 	attach [ = mime-boundary-string ]
 	signoff = true
diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt
index ee506e67f0..4b32322a67 100644
--- a/Documentation/git-grep.txt
+++ b/Documentation/git-grep.txt
@@ -17,7 +17,7 @@ SYNOPSIS
 	   [-z | --null]
 	   [-c | --count] [--all-match] [-q | --quiet]
 	   [--max-depth <depth>]
-	   [--color | --no-color]
+	   [--color[=<when>] | --no-color]
 	   [-A <post-context>] [-B <pre-context>] [-C <context>]
 	   [-f <file>] [-e] <pattern>
 	   [--and|--or|--not|(|)|-e <pattern>...]
@@ -114,12 +114,14 @@ OPTIONS
 	Instead of showing every matched line, show the number of
 	lines that match.
 
---color::
+--color[=<when>]::
 	Show colored matches.
+	The value must be always (the default), never, or auto.
 
 --no-color::
 	Turn off match highlighting, even when the configuration file
 	gives the default to color output.
+	Same as `--color=never`.
 
 -[ABC] <context>::
 	Show `context` trailing (`A` -- after), or leading (`B`
diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt
index 479fce4693..6904739a48 100644
--- a/Documentation/git-hash-object.txt
+++ b/Documentation/git-hash-object.txt
@@ -10,7 +10,7 @@ SYNOPSIS
 --------
 [verse]
 'git hash-object' [-t <type>] [-w] [--path=<file>|--no-filters] [--stdin] [--] <file>...
-'git hash-object' [-t <type>] [-w] --stdin-paths < <list-of-paths>
+'git hash-object' [-t <type>] [-w] --stdin-paths [--no-filters] < <list-of-paths>
 
 DESCRIPTION
 -----------
diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt
index ad446b0e8b..57aba42e66 100644
--- a/Documentation/git-imap-send.txt
+++ b/Documentation/git-imap-send.txt
@@ -73,6 +73,10 @@ imap.preformattedHTML::
 	option causes Thunderbird to send the patch as a plain/text,
 	format=fixed email.  Default is `false`.
 
+imap.authMethod::
+	Specify authenticate method for authentication with IMAP server.
+	Current supported method is 'CRAM-MD5' only.
+
 Examples
 ~~~~~~~~
 
diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt
index 7ee102da48..246b07ebf9 100644
--- a/Documentation/git-init.txt
+++ b/Documentation/git-init.txt
@@ -28,14 +28,8 @@ current working directory.
 
 --template=<template_directory>::
 
-Provide the directory from which templates will be used.  The default template
-directory is `/usr/share/git-core/templates`.
-
-When specified, `<template_directory>` is used as the source of the template
-files rather than the default.  The template files include some directory
-structure, some suggested "exclude patterns", and copies of non-executing
-"hook" files.  The suggested patterns and hook files are all modifiable and
-extensible.
+Specify the directory from which templates will be used.  (See the "TEMPLATE
+DIRECTORY" section below.)
 
 --shared[={false|true|umask|group|all|world|everybody|0xxx}]::
 
@@ -106,6 +100,25 @@ of the repository, such as installing the default hooks and
 setting the configuration variables.  The old name is retained
 for backward compatibility reasons.
 
+TEMPLATE DIRECTORY
+------------------
+
+The template directory contains files and directories that will be copied to
+the `$GIT_DIR` after it is created.
+
+The template directory used will (in order):
+
+ - The argument given with the `--template` option.
+
+ - The contents of the `$GIT_TEMPLATE_DIR` environment variable.
+
+ - The `init.templatedir` configuration variable.
+
+ - The default template directory: `/usr/share/git-core/templates`.
+
+The default template directory includes some directory structure, some
+suggested "exclude patterns", and copies of sample "hook" files.
+The suggested patterns and hook files are all modifiable and extensible.
 
 EXAMPLES
 --------
diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt
index 0e39bb61ee..d7f6a9cc3e 100644
--- a/Documentation/git-log.txt
+++ b/Documentation/git-log.txt
@@ -118,11 +118,62 @@ git log master --not --remotes=*/master::
 	Shows all commits that are in local master but not in any remote
 	repository master branches.
 
+git log -p -m --first-parent::
+
+	Shows the history including change diffs, but only from the
+	"main branch" perspective, skipping commits that come from merged
+	branches, and showing full diffs of changes introduced by the merges.
+	This makes sense only when following a strict policy of merging all
+	topic branches when staying on a single integration branch.
+
+
 Discussion
 ----------
 
 include::i18n.txt[]
 
+Configuration
+-------------
+
+See linkgit:git-config[1] for core variables and linkgit:git-diff[1]
+for settings related to diff generation.
+
+format.pretty::
+	Default for the `--format` option.  (See "PRETTY FORMATS" above.)
+	Defaults to "medium".
+
+i18n.logOutputEncoding::
+	Encoding to use when displaying logs.  (See "Discussion", above.)
+	Defaults to the value of `i18n.commitEncoding` if set, UTF-8
+	otherwise.
+
+log.date::
+	Default format for human-readable dates.  (Compare the
+	`--date` option.)  Defaults to "default", which means to write
+	dates like `Sat May 8 19:35:34 2010 -0500`.
+
+log.showroot::
+	If `false`, 'git log' and related commands will not treat the
+	initial commit as a big creation event.  Any root commits in
+	`git log -p` output would be shown without a diff attached.
+	The default is `true`.
+
+mailmap.file::
+	See linkgit:git-shortlog[1].
+
+notes.displayRef::
+	Which refs, in addition to the default set by `core.notesRef`
+	or 'GIT_NOTES_REF', to read notes from when showing commit
+	messages with the 'log' family of commands.  See
+	linkgit:git-notes[1].
++
+May be an unabbreviated ref name or a glob and may be specified
+multiple times.  A warning will be issued for refs that do not exist,
+but a glob that does not match any refs is silently ignored.
++
+This setting can be disabled by the `--no-standard-notes` option,
+overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable,
+and supplemented by the `--show-notes` option.
 
 Author
 ------
diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt
index e3d58cbac3..3ea5aad56c 100644
--- a/Documentation/git-mailinfo.txt
+++ b/Documentation/git-mailinfo.txt
@@ -40,16 +40,16 @@ OPTIONS
 -u::
 	The commit log message, author name and author email are
 	taken from the e-mail, and after minimally decoding MIME
-	transfer encoding, re-coded in UTF-8 by transliterating
+	transfer encoding, re-coded in the charset specified by
+	i18n.commitencoding (defaulting to UTF-8) by transliterating
 	them.  This used to be optional but now it is the default.
 +
 Note that the patch is always used as-is without charset
 conversion, even with this flag.
 
 --encoding=<encoding>::
-	Similar to -u but if the local convention is different
-	from what is specified by i18n.commitencoding, this flag
-	can be used to override it.
+	Similar to -u.  But when re-coding, the charset specified here is
+	used instead of the one specified by i18n.commitencoding or UTF-8.
 
 -n::
 	Disable all charset re-coding of the metadata.
diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt
index 5cc94ec53d..a634485281 100644
--- a/Documentation/git-mailsplit.txt
+++ b/Documentation/git-mailsplit.txt
@@ -7,7 +7,7 @@ git-mailsplit - Simple UNIX mbox splitter program
 
 SYNOPSIS
 --------
-'git mailsplit' [-b] [-f<nn>] [-d<prec>] -o<directory> [--] [<mbox>|<Maildir>...]
+'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [<mbox>|<Maildir>...]
 
 DESCRIPTION
 -----------
@@ -43,6 +43,9 @@ OPTIONS
 	Skip the first <nn> numbers, for example if -f3 is specified,
 	start the numbering with 0004.
 
+--keep-cr::
+	Do not remove `\r` from lines ending with `\r\n`.
+
 Author
 ------
 Written by Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt
index 234269ae59..f334d694e0 100644
--- a/Documentation/git-merge-file.txt
+++ b/Documentation/git-merge-file.txt
@@ -10,7 +10,7 @@ SYNOPSIS
 --------
 [verse]
 'git merge-file' [-L <current-name> [-L <base-name> [-L <other-name>]]]
-	[--ours|--theirs] [-p|--stdout] [-q|--quiet]
+	[--ours|--theirs|--union] [-p|--stdout] [-q|--quiet] [--marker-size=<n>]
 	<current-file> <base-file> <other-file>
 
 
@@ -35,9 +35,10 @@ normally outputs a warning and brackets the conflict with lines containing
 	>>>>>>> B
 
 If there are conflicts, the user should edit the result and delete one of
-the alternatives.  When `--ours` or `--theirs` option is in effect, however,
-these conflicts are resolved favouring lines from `<current-file>` or
-lines from `<other-file>` respectively.
+the alternatives.  When `--ours`, `--theirs`, or `--union` option is in effect,
+however, these conflicts are resolved favouring lines from `<current-file>`,
+lines from `<other-file>`, or lines from both respectively.  The length of the
+conflict markers can be given with the `--marker-size` option.
 
 The exit value of this program is negative on error, and the number of
 conflicts otherwise. If the merge was clean, the exit value is 0.
@@ -67,8 +68,9 @@ OPTIONS
 
 --ours::
 --theirs::
+--union::
 	Instead of leaving conflicts in the file, resolve conflicts
-	favouring our (or their) side of the lines.
+	favouring our (or their or both) side of the lines.
 
 
 EXAMPLES
diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt
index c2325ef90e..84043cc5b2 100644
--- a/Documentation/git-merge.txt
+++ b/Documentation/git-merge.txt
@@ -58,7 +58,12 @@ include::merge-options.txt[]
 
 -m <msg>::
 	Set the commit message to be used for the merge commit (in
-	case one is created). The 'git fmt-merge-msg' command can be
+	case one is created).
+
+	If `--log` is specified, a shortlog of the commits being merged
+	will be appended to the specified message.
+
+	The 'git fmt-merge-msg' command can be
 	used to give a good default for automated 'git merge'
 	invocations.
 
diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt
index d4487cab52..de63ef0745 100644
--- a/Documentation/git-notes.txt
+++ b/Documentation/git-notes.txt
@@ -3,57 +3,275 @@ git-notes(1)
 
 NAME
 ----
-git-notes - Add/inspect commit notes
+git-notes - Add or inspect object notes
 
 SYNOPSIS
 --------
 [verse]
-'git notes' (edit [-F <file> | -m <msg>] | show) [commit]
+'git notes' [list [<object>]]
+'git notes' add [-f] [-F <file> | -m <msg> | (-c | -C) <object>] [<object>]
+'git notes' copy [-f] ( --stdin | <from-object> <to-object> )
+'git notes' append [-F <file> | -m <msg> | (-c | -C) <object>] [<object>]
+'git notes' edit [<object>]
+'git notes' show [<object>]
+'git notes' remove [<object>]
+'git notes' prune
+
 
 DESCRIPTION
 -----------
-This command allows you to add notes to commit messages, without
-changing the commit.  To discern these notes from the message stored
-in the commit object, the notes are indented like the message, after
-an unindented line saying "Notes:".
+Adds, removes, or reads notes attached to objects, without touching
+the objects themselves.
+
+By default, notes are saved to and read from `refs/notes/commits`, but
+this default can be overridden.  See the OPTIONS, CONFIGURATION, and
+ENVIRONMENT sections below.  If this ref does not exist, it will be
+quietly created when it is first needed to store a note.
+
+A typical use of notes is to supplement a commit message without
+changing the commit itself. Notes can be shown by 'git log' along with
+the original commit message. To distinguish these notes from the
+message stored in the commit object, the notes are indented like the
+message, after an unindented line saying "Notes (<refname>):" (or
+"Notes:" for `refs/notes/commits`).
 
-To disable commit notes, you have to set the config variable
-core.notesRef to the empty string.  Alternatively, you can set it
-to a different ref, something like "refs/notes/bugzilla".  This setting
-can be overridden by the environment variable "GIT_NOTES_REF".
+To change which notes are shown by 'git log', see the
+"notes.displayRef" configuration in linkgit:git-log[1].
+
+See the "notes.rewrite.<command>" configuration for a way to carry
+notes across commands that rewrite commits.
 
 
 SUBCOMMANDS
 -----------
 
+list::
+	List the notes object for a given object. If no object is
+	given, show a list of all note objects and the objects they
+	annotate (in the format "<note object> <annotated object>").
+	This is the default subcommand if no subcommand is given.
+
+add::
+	Add notes for a given object (defaults to HEAD). Abort if the
+	object already has notes (use `-f` to overwrite an
+	existing note).
+
+copy::
+	Copy the notes for the first object onto the second object.
+	Abort if the second object already has notes, or if the first
+	object has none (use -f to overwrite existing notes to the
+	second object). This subcommand is equivalent to:
+	`git notes add [-f] -C $(git notes list <from-object>) <to-object>`
++
+In `\--stdin` mode, take lines in the format
++
+----------
+<from-object> SP <to-object> [ SP <rest> ] LF
+----------
++
+on standard input, and copy the notes from each <from-object> to its
+corresponding <to-object>.  (The optional `<rest>` is ignored so that
+the command can read the input given to the `post-rewrite` hook.)
+
+append::
+	Append to the notes of an existing object (defaults to HEAD).
+	Creates a new notes object if needed.
+
 edit::
-	Edit the notes for a given commit (defaults to HEAD).
+	Edit the notes for a given object (defaults to HEAD).
 
 show::
-	Show the notes for a given commit (defaults to HEAD).
+	Show the notes for a given object (defaults to HEAD).
+
+remove::
+	Remove the notes for a given object (defaults to HEAD).
+	This is equivalent to specifying an empty note message to
+	the `edit` subcommand.
 
+prune::
+	Remove all notes for non-existing/unreachable objects.
 
 OPTIONS
 -------
+-f::
+--force::
+	When adding notes to an object that already has notes,
+	overwrite the existing notes (instead of aborting).
+
 -m <msg>::
+--message=<msg>::
 	Use the given note message (instead of prompting).
-	If multiple `-m` (or `-F`) options are given, their
-	values are concatenated as separate paragraphs.
+	If multiple `-m` options are given, their values
+	are concatenated as separate paragraphs.
+	Lines starting with `#` and empty lines other than a
+	single line between paragraphs will be stripped out.
 
 -F <file>::
+--file=<file>::
 	Take the note message from the given file.  Use '-' to
 	read the note message from the standard input.
-	If multiple `-F` (or `-m`) options are given, their
-	values are concatenated as separate paragraphs.
+	Lines starting with `#` and empty lines other than a
+	single line between paragraphs will be stripped out.
+
+-C <object>::
+--reuse-message=<object>::
+	Take the note message from the given blob object (for
+	example, another note).
+
+-c <object>::
+--reedit-message=<object>::
+	Like '-C', but with '-c' the editor is invoked, so that
+	the user can further edit the note message.
+
+--ref <ref>::
+	Manipulate the notes tree in <ref>.  This overrides
+	'GIT_NOTES_REF' and the "core.notesRef" configuration.  The ref
+	is taken to be in `refs/notes/` if it is not qualified.
+
+
+DISCUSSION
+----------
+
+Commit notes are blobs containing extra information about an object
+(usually information to supplement a commit's message).  These blobs
+are taken from notes refs.  A notes ref is usually a branch which
+contains "files" whose paths are the object names for the objects
+they describe, with some directory separators included for performance
+reasons footnote:[Permitted pathnames have the form
+'ab'`/`'cd'`/`'ef'`/`'...'`/`'abcdef...': a sequence of directory
+names of two hexadecimal digits each followed by a filename with the
+rest of the object ID.].
+
+Every notes change creates a new commit at the specified notes ref.
+You can therefore inspect the history of the notes by invoking, e.g.,
+`git log -p notes/commits`.  Currently the commit message only records
+which operation triggered the update, and the commit authorship is
+determined according to the usual rules (see linkgit:git-commit[1]).
+These details may change in the future.
+
+It is also permitted for a notes ref to point directly to a tree
+object, in which case the history of the notes can be read with
+`git log -p -g <refname>`.
+
+
+EXAMPLES
+--------
+
+You can use notes to add annotations with information that was not
+available at the time a commit was written.
+
+------------
+$ git notes add -m 'Tested-by: Johannes Sixt <j6t@kdbg.org>' 72a144e2
+$ git show -s 72a144e
+[...]
+    Signed-off-by: Junio C Hamano <gitster@pobox.com>
+
+Notes:
+    Tested-by: Johannes Sixt <j6t@kdbg.org>
+------------
+
+In principle, a note is a regular Git blob, and any kind of
+(non-)format is accepted.  You can binary-safely create notes from
+arbitrary files using 'git hash-object':
+
+------------
+$ cc *.c
+$ blob=$(git hash-object -w a.out)
+$ git notes --ref=built add -C "$blob" HEAD
+------------
+
+Of course, it doesn't make much sense to display non-text-format notes
+with 'git log', so if you use such notes, you'll probably need to write
+some special-purpose tools to do something useful with them.
+
+
+CONFIGURATION
+-------------
+
+core.notesRef::
+	Notes ref to read and manipulate instead of
+	`refs/notes/commits`.  Must be an unabbreviated ref name.
+	This setting can be overridden through the environment and
+	command line.
+
+notes.displayRef::
+	Which ref (or refs, if a glob or specified more than once), in
+	addition to the default set by `core.notesRef` or
+	'GIT_NOTES_REF', to read notes from when showing commit
+	messages with the 'git log' family of commands.
+	This setting can be overridden on the command line or by the
+	'GIT_NOTES_DISPLAY_REF' environment variable.
+	See linkgit:git-log[1].
+
+notes.rewrite.<command>::
+	When rewriting commits with <command> (currently `amend` or
+	`rebase`), if this variable is `false`, git will not copy
+	notes from the original to the rewritten commit.  Defaults to
+	`true`.  See also "`notes.rewriteRef`" below.
++
+This setting can be overridden by the 'GIT_NOTES_REWRITE_REF'
+environment variable.
+
+notes.rewriteMode::
+	When copying notes during a rewrite, what to do if the target
+	commit already has a note.  Must be one of `overwrite`,
+	`concatenate`, and `ignore`.  Defaults to `concatenate`.
++
+This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
+environment variable.
+
+notes.rewriteRef::
+	When copying notes during a rewrite, specifies the (fully
+	qualified) ref whose notes should be copied.  May be a glob,
+	in which case notes in all matching refs will be copied.  You
+	may also specify this configuration several times.
++
+Does not have a default value; you must configure this variable to
+enable note rewriting.
++
+Can be overridden with the 'GIT_NOTES_REWRITE_REF' environment variable.
+
+
+ENVIRONMENT
+-----------
+
+'GIT_NOTES_REF'::
+	Which ref to manipulate notes from, instead of `refs/notes/commits`.
+	This overrides the `core.notesRef` setting.
+
+'GIT_NOTES_DISPLAY_REF'::
+	Colon-delimited list of refs or globs indicating which refs,
+	in addition to the default from `core.notesRef` or
+	'GIT_NOTES_REF', to read notes from when showing commit
+	messages.
+	This overrides the `notes.displayRef` setting.
++
+A warning will be issued for refs that do not exist, but a glob that
+does not match any refs is silently ignored.
+
+'GIT_NOTES_REWRITE_MODE'::
+	When copying notes during a rewrite, what to do if the target
+	commit already has a note.
+	Must be one of `overwrite`, `concatenate`, and `ignore`.
+	This overrides the `core.rewriteMode` setting.
+
+'GIT_NOTES_REWRITE_REF'::
+	When rewriting commits, which notes to copy from the original
+	to the rewritten commit.  Must be a colon-delimited list of
+	refs or globs.
++
+If not set in the environment, the list of notes to copy depends
+on the `notes.rewrite.<command>` and `notes.rewriteRef` settings.
 
 
 Author
 ------
-Written by Johannes Schindelin <johannes.schindelin@gmx.de>
+Written by Johannes Schindelin <johannes.schindelin@gmx.de> and
+Johan Herland <johan@herland.net>
 
 Documentation
 -------------
-Documentation by Johannes Schindelin
+Documentation by Johannes Schindelin and Johan Herland
 
 GIT
 ---
diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt
index 31f42ea21a..ab4de10358 100644
--- a/Documentation/git-pull.txt
+++ b/Documentation/git-pull.txt
@@ -31,6 +31,16 @@ in a state that is hard to back out of in the case of a conflict.
 OPTIONS
 -------
 
+-q::
+--quiet::
+	This is passed to both underlying git-fetch to squelch reporting of
+	during transfer, and underlying git-merge to squelch output during
+	merging.
+
+-v::
+--verbose::
+	Pass --verbose to git-fetch and git-merge.
+
 Options related to merging
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt
index 7a4e507c4b..48570242fb 100644
--- a/Documentation/git-push.txt
+++ b/Documentation/git-push.txt
@@ -146,14 +146,21 @@ useful if you write an alias or script around 'git push'.
 	receiver share many of the same objects in common. The default is
 	\--thin.
 
+-q::
+--quiet::
+	Suppress all output, including the listing of updated refs,
+	unless an error occurs. Progress is not reported to the standard
+	error stream.
+
 -v::
 --verbose::
 	Run verbosely.
 
--q::
---quiet::
-	Suppress all output, including the listing of updated refs,
-	unless an error occurs.
+--progress::
+	Progress status is reported on the standard error stream
+	by default when it is attached to a terminal, unless -q
+	is specified. This flag forces progress status even if the
+	standard error stream is not directed to a terminal.
 
 include::urls-remotes.txt[]
 
diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt
index 823f2a4638..be23ad2359 100644
--- a/Documentation/git-rebase.txt
+++ b/Documentation/git-rebase.txt
@@ -206,6 +206,10 @@ OPTIONS
 	--onto option is not specified, the starting point is
 	<upstream>.  May be any valid commit, and not just an
 	existing branch name.
++
+As a special case, you may use "A...B" as a shortcut for the
+merge base of A and B if there is exactly one merge base. You can
+leave out at most one of A and B, in which case it defaults to HEAD.
 
 <upstream>::
 	Upstream branch to compare against.  May be any valid commit,
@@ -274,9 +278,16 @@ which makes little sense.
 -f::
 --force-rebase::
 	Force the rebase even if the current branch is a descendant
-	of the commit you are rebasing onto.  Normally the command will
+	of the commit you are rebasing onto.  Normally non-interactive rebase will
 	exit with the message "Current branch is up to date" in such a
 	situation.
+	Incompatible with the --interactive option.
++
+You may find this (or --no-ff with an interactive rebase) helpful after
+reverting a topic branch merge, as this option recreates the topic branch with
+fresh commits so it can be remerged successfully without needing to "revert
+the reversion" (see the
+link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details).
 
 --ignore-whitespace::
 --whitespace=<option>::
@@ -288,6 +299,7 @@ which makes little sense.
 --ignore-date::
 	These flags are passed to 'git am' to easily change the dates
 	of the rebased commits (see linkgit:git-am[1]).
+	Incompatible with the --interactive option.
 
 -i::
 --interactive::
@@ -298,6 +310,11 @@ which makes little sense.
 -p::
 --preserve-merges::
 	Instead of ignoring merges, try to recreate them.
++
+This uses the `--interactive` machinery internally, but combining it
+with the `--interactive` option explicitly is generally not a good
+idea unless you know what you are doing (see BUGS below).
+
 
 --root::
 	Rebase all commits reachable from <branch>, instead of
@@ -316,7 +333,19 @@ which makes little sense.
 	commit to be modified, and change the action of the moved
 	commit from `pick` to `squash` (or `fixup`).
 +
-This option is only valid when '--interactive' option is used.
+This option is only valid when the '--interactive' option is used.
+
+--no-ff::
+	With --interactive, cherry-pick all rebased commits instead of
+	fast-forwarding over the unchanged ones.  This ensures that the
+	entire history of the rebased branch is composed of new commits.
++
+Without --interactive, this is a synonym for --force-rebase.
++
+You may find this helpful after reverting a topic branch merge, as this option
+recreates the topic branch with fresh commits so it can be remerged
+successfully without needing to "revert the reversion" (see the
+link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details).
 
 include::merge-strategies.txt[]
 
@@ -587,6 +616,28 @@ The ripple effect of a "hard case" recovery is especially bad:
 case" recovery too!
 
 
+BUGS
+----
+The todo list presented by `--preserve-merges --interactive` does not
+represent the topology of the revision graph.  Editing commits and
+rewording their commit messages should work fine, but attempts to
+reorder commits tend to produce counterintuitive results.
+
+For example, an attempt to rearrange
+------------
+1 --- 2 --- 3 --- 4 --- 5
+------------
+to
+------------
+1 --- 2 --- 4 --- 3 --- 5
+------------
+by moving the "pick 4" line will result in the following history:
+------------
+	3
+       /
+1 --- 2 --- 4 --- 5
+------------
+
 Authors
 ------
 Written by Junio C Hamano <gitster@pobox.com> and
diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt
index 1b5f61aa0b..3a23477ce7 100644
--- a/Documentation/git-remote-helpers.txt
+++ b/Documentation/git-remote-helpers.txt
@@ -3,20 +3,69 @@ git-remote-helpers(1)
 
 NAME
 ----
-git-remote-helpers - Helper programs for interoperation with remote git
+git-remote-helpers - Helper programs to interact with remote repositories
 
 SYNOPSIS
 --------
-'git remote-<transport>' <remote>
+'git remote-<transport>' <repository> [<URL>]
 
 DESCRIPTION
 -----------
 
-These programs are normally not used directly by end users, but are
-invoked by various git programs that interact with remote repositories
-when the repository they would operate on will be accessed using
-transport code not linked into the main git binary. Various particular
-helper programs will behave as documented here.
+Remote helper programs are normally not used directly by end users,
+but they are invoked by git when it needs to interact with remote
+repositories git does not support natively.  A given helper will
+implement a subset of the capabilities documented here. When git
+needs to interact with a repository using a remote helper, it spawns
+the helper as an independent process, sends commands to the helper's
+standard input, and expects results from the helper's standard
+output. Because a remote helper runs as an independent process from
+git, there is no need to re-link git to add a new helper, nor any
+need to link the helper with the implementation of git.
+
+Every helper must support the "capabilities" command, which git will
+use to determine what other commands the helper will accept.  Other
+commands generally concern facilities like discovering and updating
+remote refs, transporting objects between the object database and
+the remote repository, and updating the local object store.
+
+Helpers supporting the 'fetch' capability can discover refs from the
+remote repository and transfer objects reachable from those refs to
+the local object store. Helpers supporting the 'push' capability can
+transfer local objects to the remote repository and update remote refs.
+
+Git comes with a "curl" family of remote helpers, that handle various
+transport protocols, such as 'git-remote-http', 'git-remote-https',
+'git-remote-ftp' and 'git-remote-ftps'. They implement the capabilities
+'fetch', 'option', and 'push'.
+
+INVOCATION
+----------
+
+Remote helper programs are invoked with one or (optionally) two
+arguments. The first argument specifies a remote repository as in git;
+it is either the name of a configured remote or a URL. The second
+argument specifies a URL; it is usually of the form
+'<transport>://<address>', but any arbitrary string is possible.
+
+When git encounters a URL of the form '<transport>://<address>', where
+'<transport>' is a protocol that it cannot handle natively, it
+automatically invokes 'git remote-<transport>' with the full URL as
+the second argument. If such a URL is encountered directly on the
+command line, the first argument is the same as the second, and if it
+is encountered in a configured remote, the first argument is the name
+of that remote.
+
+A URL of the form '<transport>::<address>' explicitly instructs git to
+invoke 'git remote-<transport>' with '<address>' as the second
+argument. If such a URL is encountered directly on the command line,
+the first argument is '<address>', and if it is encountered in a
+configured remote, the first argument is the name of that remote.
+
+Additionally, when a configured remote has 'remote.<name>.vcs' set to
+'<transport>', git explicitly invokes 'git remote-<transport>' with
+'<name>' as the first argument. If set, the second argument is
+'remote.<name>.url'; otherwise, the second argument is omitted.
 
 COMMANDS
 --------
@@ -25,8 +74,8 @@ Commands are given by the caller on the helper's standard input, one per line.
 
 'capabilities'::
 	Lists the capabilities of the helper, one per line, ending
-	with a blank line. Each capability may be preceded with '*'.
-	This marks them mandatory for git version using the remote
+	with a blank line. Each capability may be preceded with '*',
+	which marks them mandatory for git version using the remote
 	helper to understand (unknown mandatory capability is fatal
 	error).
 
@@ -35,27 +84,27 @@ Commands are given by the caller on the helper's standard input, one per line.
 	[<attr> ...]". The value may be a hex sha1 hash, "@<dest>" for
 	a symref, or "?" to indicate that the helper could not get the
 	value of the ref. A space-separated list of attributes follows
-	the name; unrecognized attributes are ignored. After the
-	complete list, outputs a blank line.
+	the name; unrecognized attributes are ignored. The list ends
+	with a blank line.
 +
 If 'push' is supported this may be called as 'list for-push'
 to obtain the current refs prior to sending one or more 'push'
 commands to the helper.
 
 'option' <name> <value>::
-	Set the transport helper option <name> to <value>.  Outputs a
+	Sets the transport helper option <name> to <value>.  Outputs a
 	single line containing one of 'ok' (option successfully set),
 	'unsupported' (option not recognized) or 'error <msg>'
-	(option <name> is supported but <value> is not correct
+	(option <name> is supported but <value> is not valid
 	for it).  Options should be set before other commands,
-	and may how those commands behave.
+	and may influence the behavior of those commands.
 +
 Supported if the helper has the "option" capability.
 
 'fetch' <sha1> <name>::
 	Fetches the given object, writing the necessary objects
 	to the database.  Fetch commands are sent in a batch, one
-	per line, and the batch is terminated with a blank line.
+	per line, terminated with a blank line.
 	Outputs a single blank line when all fetch commands in the
 	same batch are complete. Only objects which were reported
 	in the ref list with a sha1 may be fetched this way.
@@ -67,7 +116,7 @@ suitably updated.
 Supported if the helper has the "fetch" capability.
 
 'push' +<src>:<dst>::
-	Pushes the given <src> commit or branch locally to the
+	Pushes the given local <src> commit or branch to the
 	remote branch described by <dst>.  A batch sequence of
 	one or more push commands is terminated with a blank line.
 +
@@ -91,6 +140,9 @@ Supported if the helper has the "push" capability.
 	by applying the refspecs from the "refspec" capability to the
 	name of the ref.
 +
+Especially useful for interoperability with a foreign versioning
+system.
++
 Supported if the helper has the "import" capability.
 
 'connect' <service>::
@@ -119,16 +171,11 @@ CAPABILITIES
 ------------
 
 'fetch'::
-	This helper supports the 'fetch' command.
-
 'option'::
-	This helper supports the option command.
-
 'push'::
-	This helper supports the 'push' command.
-
 'import'::
-	This helper supports the 'import' command.
+'connect'::
+	This helper supports the corresponding command with the same name.
 
 'refspec' 'spec'::
 	When using the import command, expect the source ref to have
@@ -140,9 +187,6 @@ CAPABILITIES
 	all, it must cover all refs reported by the list command; if
 	it is not used, it is effectively "*:*"
 
-'connect'::
-	This helper supports the 'connect' command.
-
 REF LIST ATTRIBUTES
 -------------------
 
@@ -158,19 +202,19 @@ REF LIST ATTRIBUTES
 OPTIONS
 -------
 'option verbosity' <N>::
-	Change the level of messages displayed by the helper.
-	When N is 0 the end-user has asked the process to be
-	quiet, and the helper should produce only error output.
-	N of 1 is the default level of verbosity, higher values
+	Changes the verbosity of messages displayed by the helper.
+	A value of 0 for N means that processes operate
+	quietly, and the helper produces only error output.
+	1 is the default level of verbosity, and higher values
 	of N correspond to the number of -v flags passed on the
 	command line.
 
 'option progress' \{'true'|'false'\}::
-	Enable (or disable) progress messages displayed by the
+	Enables (or disables) progress messages displayed by the
 	transport helper during a command.
 
 'option depth' <depth>::
-	Deepen the history of a shallow repository.
+	Deepens the history of a shallow repository.
 
 'option followtags' \{'true'|'false'\}::
 	If enabled the helper should automatically fetch annotated
@@ -186,11 +230,15 @@ OPTIONS
 	helpers this only applies to the 'push', if supported.
 
 'option servpath <c-style-quoted-path>'::
-	Set service path (--upload-pack, --receive-pack etc.) for
-	next connect. Remote helper MAY support this option. Remote
-	helper MUST NOT rely on this option being set before
+	Sets service path (--upload-pack, --receive-pack etc.) for
+	next connect. Remote helper may support this option, but
+	must not rely on this option being set before
 	connect request occurs.
 
+SEE ALSO
+--------
+linkgit:git-remote[1]
+
 Documentation
 -------------
 Documentation by Daniel Barkalow and Ilari Liusvaara
diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt
index 168db08627..645f0c1748 100644
--- a/Documentation/git-reset.txt
+++ b/Documentation/git-reset.txt
@@ -8,7 +8,7 @@ git-reset - Reset current HEAD to the specified state
 SYNOPSIS
 --------
 [verse]
-'git reset' [--mixed | --soft | --hard | --merge] [-q] [<commit>]
+'git reset' [--mixed | --soft | --hard | --merge | --keep] [-q] [<commit>]
 'git reset' [-q] [<commit>] [--] <paths>...
 'git reset' --patch [<commit>] [--] [<paths>...]
 
@@ -52,6 +52,14 @@ OPTIONS
 	and updates the files that are different between the named commit
 	and the current commit in the working tree.
 
+--keep::
+	Reset the index to the given commit, keeping local changes in
+	the working tree since the current commit, while updating
+	working tree files without local changes to what appears in
+	the given commit.  If a file that is different between the
+	current commit and the given commit has local changes, reset
+	is aborted.
+
 -p::
 --patch::
 	Interactively select hunks in the difference between the index
@@ -93,6 +101,7 @@ in the index and in state D in HEAD.
 				--mixed  A       D     D
 				--hard   D       D     D
 				--merge (disallowed)
+				--keep  (disallowed)
 
       working index HEAD target         working index HEAD
       ----------------------------------------------------
@@ -100,6 +109,7 @@ in the index and in state D in HEAD.
 				--mixed  A       C     C
 				--hard   C       C     C
 				--merge (disallowed)
+				--keep   A       C     C
 
       working index HEAD target         working index HEAD
       ----------------------------------------------------
@@ -107,6 +117,7 @@ in the index and in state D in HEAD.
 				--mixed  B       D     D
 				--hard   D       D     D
 				--merge  D       D     D
+				--keep  (disallowed)
 
       working index HEAD target         working index HEAD
       ----------------------------------------------------
@@ -114,6 +125,7 @@ in the index and in state D in HEAD.
 				--mixed  B       C     C
 				--hard   C       C     C
 				--merge  C       C     C
+				--keep   B       C     C
 
       working index HEAD target         working index HEAD
       ----------------------------------------------------
@@ -121,6 +133,7 @@ in the index and in state D in HEAD.
 				--mixed  B       D     D
 				--hard   D       D     D
 				--merge (disallowed)
+				--keep  (disallowed)
 
       working index HEAD target         working index HEAD
       ----------------------------------------------------
@@ -128,6 +141,7 @@ in the index and in state D in HEAD.
 				--mixed  B       C     C
 				--hard   C       C     C
 				--merge  B       C     C
+				--keep   B       C     C
 
 "reset --merge" is meant to be used when resetting out of a conflicted
 merge. Any mergy operation guarantees that the work tree file that is
@@ -138,6 +152,15 @@ between the index and the work tree, then it means that we are not
 resetting out from a state that a mergy operation left after failing
 with a conflict. That is why we disallow --merge option in this case.
 
+"reset --keep" is meant to be used when removing some of the last
+commits in the current branch while keeping changes in the working
+tree. If there could be conflicts between the changes in the commit we
+want to remove and the changes in the working tree we want to keep,
+the reset is disallowed. That's why it is disallowed if there are both
+changes between the working tree and HEAD, and between HEAD and the
+target. To be safe, it is also disallowed when there are unmerged
+entries.
+
 The following tables show what happens when there are unmerged
 entries:
 
@@ -147,6 +170,7 @@ entries:
 				--mixed  X       B     B
 				--hard   B       B     B
 				--merge  B       B     B
+				--keep  (disallowed)
 
       working index HEAD target         working index HEAD
       ----------------------------------------------------
@@ -154,6 +178,7 @@ entries:
 				--mixed  X       A     A
 				--hard   A       A     A
 				--merge  A       A     A
+				--keep  (disallowed)
 
 X means any state and U means an unmerged index.
 
@@ -325,6 +350,32 @@ $ git add frotz.c                           <3>
 <2> This commits all other changes in the index.
 <3> Adds the file to the index again.
 
+Keep changes in working tree while discarding some previous commits::
++
+Suppose you are working on something and you commit it, and then you
+continue working a bit more, but now you think that what you have in
+your working tree should be in another branch that has nothing to do
+with what you commited previously. You can start a new branch and
+reset it while keeping the changes in your work tree.
++
+------------
+$ git tag start
+$ git checkout -b branch1
+$ edit
+$ git commit ...                            <1>
+$ edit
+$ git checkout -b branch2                   <2>
+$ git reset --keep start                    <3>
+------------
++
+<1> This commits your first edits in branch1.
+<2> In the ideal world, you could have realized that the earlier
+    commit did not belong to the new topic when you created and switched
+    to branch2 (i.e. "git checkout -b branch2 start"), but nobody is
+    perfect.
+<3> But you can use "reset --keep" to remove the unwanted commit after
+    you switched to "branch2".
+
 Author
 ------
 Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index ced35b2f53..12622fc49a 100644
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -119,6 +119,13 @@ Sending
 	value reverts to plain SMTP.  Default is the value of
 	'sendemail.smtpencryption'.
 
+--smtp-domain=<FQDN>::
+	Specifies the Fully Qualified Domain Name (FQDN) used in the
+	HELO/EHLO command to the SMTP server.  Some servers require the
+	FQDN to match your IP address.  If not set, git send-email attempts
+	to determine your FQDN automatically.  Default is the value of
+	'sendemail.smtpdomain'.
+
 --smtp-pass[=<password>]::
 	Password for SMTP-AUTH. The argument is optional: If no
 	argument is specified, then the empty string is used as
@@ -300,6 +307,21 @@ sendemail.confirm::
 	in the previous section for the meaning of these values.
 
 
+Use gmail as the smtp server
+----------------------------
+
+Add the following section to the config file:
+
+	[sendemail]
+		smtpencryption = tls
+		smtpserver = smtp.gmail.com
+		smtpuser = yourname@gmail.com
+		smtpserverport = 587
+
+Note: the following perl modules are required
+      Net::SMTP::SSL, MIME::Base64 and Authen::SASL
+
+
 Author
 ------
 Written by Ryan Anderson <ryan@michonline.com>
diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt
index b9c4154e73..f1499bba88 100644
--- a/Documentation/git-show-branch.txt
+++ b/Documentation/git-show-branch.txt
@@ -9,7 +9,7 @@ SYNOPSIS
 --------
 [verse]
 'git show-branch' [-a|--all] [-r|--remotes] [--topo-order | --date-order]
-		[--current] [--color | --no-color] [--sparse]
+		[--current] [--color[=<when>] | --no-color] [--sparse]
 		[--more=<n> | --list | --independent | --merge-base]
 		[--no-name | --sha1-name] [--topics]
 		[<rev> | <glob>]...
@@ -117,13 +117,15 @@ OPTIONS
 	When no explicit <ref> parameter is given, it defaults to the
 	current branch (or `HEAD` if it is detached).
 
---color::
+--color[=<when>]::
 	Color the status sign (one of these: `*` `!` `+` `-`) of each commit
 	corresponding to the branch it's in.
+	The value must be always (the default), never, or auto.
 
 --no-color::
 	Turn off colored output, even when the configuration file gives the
 	default to color output.
+	Same as `--color=never`.
 
 Note that --more, --list, --independent and --merge-base options
 are mutually exclusive.
diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt
index 68dc1879fe..765d4b312e 100644
--- a/Documentation/git-update-index.txt
+++ b/Documentation/git-update-index.txt
@@ -93,8 +93,6 @@ OPTIONS
 This option can be also used as a coarse file-level mechanism
 to ignore uncommitted changes in tracked files (akin to what
 `.gitignore` does for untracked files).
-You should remember that an explicit 'git add' operation will
-still cause the file to be refreshed from the working tree.
 Git will fail (gracefully) in case it needs to modify this file
 in the index e.g. when merging in a commit;
 thus, in case the assumed-untracked file is changed upstream,
diff --git a/Documentation/git.txt b/Documentation/git.txt
index 105b0b580b..c4024d0edd 100644
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -43,6 +43,11 @@ unreleased) version of git, that is available from 'master'
 branch of the `git.git` repository.
 Documentation for older releases are available here:
 
+* link:v1.7.1/git.html[documentation for release 1.7.1]
+
+* release notes for
+  link:RelNotes-1.7.1.txt[1.7.1].
+
 * link:v1.7.0.6/git.html[documentation for release 1.7.0.6]
 
 * release notes for
diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt
index 9de8caf5d1..5d91a7e5b3 100644
--- a/Documentation/gitdiffcore.txt
+++ b/Documentation/gitdiffcore.txt
@@ -227,8 +227,8 @@ changes that touch a specified string, and is controlled by the
 commands.
 
 When diffcore-pickaxe is in use, it checks if there are
-filepairs whose "original" side has the specified string and
-whose "result" side does not.  Such a filepair represents "the
+filepairs whose "result" side has the specified string and
+whose "origin" side does not.  Such a filepair represents "the
 string appeared in this changeset".  It also checks for the
 opposite case that loses the specified string.
 
diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt
index 87e2c035a7..7183aa9abb 100644
--- a/Documentation/githooks.txt
+++ b/Documentation/githooks.txt
@@ -317,6 +317,44 @@ This hook is invoked by 'git gc --auto'. It takes no parameter, and
 exiting with non-zero status from this script causes the 'git gc --auto'
 to abort.
 
+post-rewrite
+~~~~~~~~~~~~
+
+This hook is invoked by commands that rewrite commits (`git commit
+--amend`, 'git-rebase'; currently 'git-filter-branch' does 'not' call
+it!).  Its first argument denotes the command it was invoked by:
+currently one of `amend` or `rebase`.  Further command-dependent
+arguments may be passed in the future.
+
+The hook receives a list of the rewritten commits on stdin, in the
+format
+
+  <old-sha1> SP <new-sha1> [ SP <extra-info> ] LF
+
+The 'extra-info' is again command-dependent.  If it is empty, the
+preceding SP is also omitted.  Currently, no commands pass any
+'extra-info'.
+
+The hook always runs after the automatic note copying (see
+"notes.rewrite.<command>" in linkgit:git-config.txt) has happened, and
+thus has access to these notes.
+
+The following command-specific comments apply:
+
+rebase::
+	For the 'squash' and 'fixup' operation, all commits that were
+	squashed are listed as being rewritten to the squashed commit.
+	This means that there will be several lines sharing the same
+	'new-sha1'.
++
+The commits are guaranteed to be listed in the order that they were
+processed by rebase.
+
+There is no default 'post-rewrite' hook, but see the
+`post-receive-copy-notes` script in `contrib/hooks` for an example
+that copies your git-notes to the rewritten commits.
+
+
 GIT
 ---
 Part of the linkgit:git[1] suite
diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt
index 98c459dc82..e10fa88b8c 100644
--- a/Documentation/gitignore.txt
+++ b/Documentation/gitignore.txt
@@ -83,16 +83,20 @@ Patterns have the following format:
 
  - If the pattern does not contain a slash '/', git treats it as
    a shell glob pattern and checks for a match against the
-   pathname without leading directories.
+   pathname relative to the location of the `.gitignore` file
+   (relative to the toplevel of the work tree if not from a
+   `.gitignore` file).
 
  - Otherwise, git treats the pattern as a shell glob suitable
    for consumption by fnmatch(3) with the FNM_PATHNAME flag:
    wildcards in the pattern will not match a / in the pathname.
    For example, "Documentation/\*.html" matches
-   "Documentation/git.html" but not
-   "Documentation/ppc/ppc.html".  A leading slash matches the
-   beginning of the pathname; for example, "/*.c" matches
-   "cat-file.c" but not "mozilla-sha1/sha1.c".
+   "Documentation/git.html" but not "Documentation/ppc/ppc.html"
+   or "tools/perf/Documentation/perf.html".
+
+ - A leading slash matches the beginning of the pathname.
+   For example, "/*.c" matches "cat-file.c" but not
+   "mozilla-sha1/sha1.c".
 
 An example:
 
diff --git a/Documentation/howto/revert-a-faulty-merge.txt b/Documentation/howto/revert-a-faulty-merge.txt
index 3b4a390005..ff5c0bc27a 100644
--- a/Documentation/howto/revert-a-faulty-merge.txt
+++ b/Documentation/howto/revert-a-faulty-merge.txt
@@ -142,6 +142,8 @@ different resolution strategies:
    revert of a merge was rebuilt from scratch (i.e. rebasing and fixing,
    as you seem to have interpreted), then re-merging the result without
    doing anything else fancy would be the right thing to do.
+   (See the ADDENDUM below for how to rebuild a branch from scratch
+   without changing its original branching-off point.)
 
 However, there are things to keep in mind when reverting a merge (and
 reverting such a revert).
@@ -177,3 +179,91 @@ the answer is: "oops, I really shouldn't have merged it, because it wasn't
 ready yet, and I really need to undo _all_ of the merge"). So then you
 really should revert the merge, but when you want to re-do the merge, you
 now need to do it by reverting the revert.
+
+ADDENDUM
+
+Sometimes you have to rewrite one of a topic branch's commits *and* you can't
+change the topic's branching-off point.  Consider the following situation:
+
+ P---o---o---M---x---x---W---x
+  \         /
+   A---B---C
+
+where commit W reverted commit M because it turned out that commit B was wrong
+and needs to be rewritten, but you need the rewritten topic to still branch
+from commit P (perhaps P is a branching-off point for yet another branch, and
+you want be able to merge the topic into both branches).
+
+The natural thing to do in this case is to checkout the A-B-C branch and use
+"rebase -i P" to change commit B.  However this does not rewrite commit A,
+because "rebase -i" by default fast-forwards over any initial commits selected
+with the "pick" command.  So you end up with this:
+
+ P---o---o---M---x---x---W---x
+  \         /
+   A---B---C   <-- old branch
+    \
+     B'---C'   <-- naively rewritten branch
+
+To merge A-B'-C' into the mainline branch you would still have to first revert
+commit W in order to pick up the changes in A, but then it's likely that the
+changes in B' will conflict with the original B changes re-introduced by the
+reversion of W.
+
+However, you can avoid these problems if you recreate the entire branch,
+including commit A:
+
+   A'---B'---C'  <-- completely rewritten branch
+  /
+ P---o---o---M---x---x---W---x
+  \         /
+   A---B---C
+
+You can merge A'-B'-C' into the mainline branch without worrying about first
+reverting W.  Mainline's history would look like this:
+
+   A'---B'---C'------------------
+  /                              \
+ P---o---o---M---x---x---W---x---M2
+  \         /
+   A---B---C
+
+But if you don't actually need to change commit A, then you need some way to
+recreate it as a new commit with the same changes in it.  The rebase commmand's
+--no-ff option provides a way to do this:
+
+    $ git rebase [-i] --no-ff P
+
+The --no-ff option creates a new branch A'-B'-C' with all-new commits (all the
+SHA IDs will be different) even if in the interactive case you only actually
+modify commit B.  You can then merge this new branch directly into the mainline
+branch and be sure you'll get all of the branch's changes.
+
+You can also use --no-ff in cases where you just add extra commits to the topic
+to fix it up.  Let's revisit the situation discussed at the start of this howto:
+
+ P---o---o---M---x---x---W---x
+  \         /
+   A---B---C----------------D---E   <-- fixed-up topic branch
+
+At this point, you can use --no-ff to recreate the topic branch:
+
+    $ git checkout E
+    $ git rebase --no-ff P
+
+yielding
+
+   A'---B'---C'------------D'---E'  <-- recreated topic branch
+  /
+ P---o---o---M---x---x---W---x
+  \         /
+   A---B---C----------------D---E
+
+You can merge the recreated branch into the mainline without reverting commit W,
+and mainline's history will look like this:
+
+   A'---B'---C'------------D'---E'
+  /                              \
+ P---o---o---M---x---x---W---x---M2
+  \         /
+   A---B---C
diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt
index 81ac823964..722d704ff2 100644
--- a/Documentation/merge-options.txt
+++ b/Documentation/merge-options.txt
@@ -72,6 +72,7 @@ option can be used to override --squash.
 	Synonyms to --stat and --no-stat; these are deprecated and will be
 	removed in the future.
 
+ifndef::git-pull[]
 -q::
 --quiet::
 	Operate quietly.
@@ -79,3 +80,4 @@ option can be used to override --squash.
 -v::
 --verbose::
 	Be verbose.
+endif::git-pull[]
diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt
index 1686a54d22..c85a52c0cc 100644
--- a/Documentation/pretty-formats.txt
+++ b/Documentation/pretty-formats.txt
@@ -76,9 +76,9 @@ displayed in full, regardless of whether --abbrev or
 true parent commits, without taking grafts nor history
 simplification into account.
 
-* 'format:'
+* 'format:<string>'
 +
-The 'format:' format allows you to specify which information
+The 'format:<string>' format allows you to specify which information
 you want to show. It works a little bit like printf format,
 with the notable exception that you get a newline with '%n'
 instead of '\n'.
diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt
index aa96caeab2..d78e121c76 100644
--- a/Documentation/pretty-options.txt
+++ b/Documentation/pretty-options.txt
@@ -3,8 +3,9 @@
 
 	Pretty-print the contents of the commit logs in a given format,
 	where '<format>' can be one of 'oneline', 'short', 'medium',
-	'full', 'fuller', 'email', 'raw' and 'format:<string>'.
-	When omitted, the format defaults to 'medium'.
+	'full', 'fuller', 'email', 'raw' and 'format:<string>'.  See
+	the "PRETTY FORMATS" section for some additional details for each
+	format.  When omitted, the format defaults to 'medium'.
 +
 Note: you can specify the default pretty format in the repository
 configuration (see linkgit:git-config[1]).
@@ -30,9 +31,18 @@ people using 80-column terminals.
 	defaults to UTF-8.
 
 --no-notes::
---show-notes::
+--show-notes[=<ref>]::
 	Show the notes (see linkgit:git-notes[1]) that annotate the
 	commit, when showing the commit log message.  This is the default
 	for `git log`, `git show` and `git whatchanged` commands when
 	there is no `--pretty`, `--format` nor `--oneline` option is
 	given on the command line.
++
+With an optional argument, add this ref to the list of notes.  The ref
+is taken to be in `refs/notes/` if it is not qualified.
+
+--[no-]standard-notes::
+	Enable or disable populating the notes ref list from the
+	'core.notesRef' and 'notes.displayRef' variables (or
+	corresponding environment overrides).  Enabled by default.
+	See linkgit:git-config[1].
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt
index 81c0e6f184..b9fb7a86bd 100644
--- a/Documentation/rev-list-options.txt
+++ b/Documentation/rev-list-options.txt
@@ -108,8 +108,8 @@ options may be given. See linkgit:git-diff-files[1] for more options.
 
 -c::
 
-	This flag changes the way a merge commit is displayed.  It shows
-	the differences from each of the parents to the merge result
+	With this option, diff output for a merge commit
+	shows the differences from each of the parents to the merge result
 	simultaneously instead of showing pairwise diff between a parent
 	and the result one at a time. Furthermore, it lists only files
 	which were modified from all parents.
@@ -121,6 +121,15 @@ options may be given. See linkgit:git-diff-files[1] for more options.
 	the parents have only two variants and the merge result picks
 	one of them without modification.
 
+-m::
+
+	This flag makes the merge commits show the full diff like
+	regular commits; for each merge parent, a separate log entry
+	and diff is generated. An exception is that only diff against
+	the first parent is shown when '--first-parent' option is given;
+	in that case, the output represents the changes the merge
+	brought _into_ the then-current branch.
+
 -r::
 
 	Show recursive diffs.
diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt
index 50f9e9ac17..312e3b2e2b 100644
--- a/Documentation/technical/api-parse-options.txt
+++ b/Documentation/technical/api-parse-options.txt
@@ -115,6 +115,9 @@ There are some macros to easily define options:
 `OPT__ABBREV(&int_var)`::
 	Add `\--abbrev[=<n>]`.
 
+`OPT__COLOR(&int_var, description)`::
+	Add `\--color[=<when>]` and `--no-color`.
+
 `OPT__DRY_RUN(&int_var)`::
 	Add `-n, \--dry-run`.
 
@@ -183,6 +186,15 @@ There are some macros to easily define options:
 	arguments.  Short options that happen to be digits take
 	precedence over it.
 
+`OPT_COLOR_FLAG(short, long, &int_var, description)`::
+	Introduce an option that takes an optional argument that can
+	have one of three values: "always", "never", or "auto".  If the
+	argument is not given, it defaults to "always".  The `--no-` form
+	works like `--long=never`; it cannot take an argument.  If
+	"always", set `int_var` to 1; if "never", set `int_var` to 0; if
+	"auto", set `int_var` to 1 if stdout is a tty or a pager,
+	0 otherwise.
+
 
 The last element of the array must be `OPT_END()`.
 
diff --git a/Documentation/technical/api-string-list.txt b/Documentation/technical/api-string-list.txt
index 293bb15d20..6d8c24bb1e 100644
--- a/Documentation/technical/api-string-list.txt
+++ b/Documentation/technical/api-string-list.txt
@@ -104,8 +104,12 @@ write `string_list_insert(...)->util = ...;`.
 `unsorted_string_list_has_string`::
 
 	It's like `string_list_has_string()` but for unsorted lists.
+
+`unsorted_string_list_lookup`::
+
+	It's like `string_list_lookup()` but for unsorted lists.
 +
-This function needs to look through all items, as opposed to its
+The above two functions need to look through all items, as opposed to their
 counterpart for sorted lists, which performs a binary search.
 
 Data structures
diff --git a/Documentation/urls.txt b/Documentation/urls.txt
index 459a394dc0..1dcd1e7f1e 100644
--- a/Documentation/urls.txt
+++ b/Documentation/urls.txt
@@ -1,44 +1,57 @@
 GIT URLS[[URLS]]
 ----------------
 
-One of the following notations can be used
-to name the remote repository:
+In general, URLs contain information about the transport protocol, the
+address of the remote server, and the path to the repository.
+Depending on the transport protocol, some of this information may be
+absent.
+
+Git natively supports ssh, git, http, https, ftp, ftps, and rsync
+protocols. The following syntaxes may be used with them:
 
-- rsync://host.xz/path/to/repo.git/
-- http://host.xz{startsb}:port{endsb}/path/to/repo.git/
-- https://host.xz{startsb}:port{endsb}/path/to/repo.git/
-- git://host.xz{startsb}:port{endsb}/path/to/repo.git/
-- git://host.xz{startsb}:port{endsb}/~user/path/to/repo.git/
 - ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/path/to/repo.git/
-- ssh://{startsb}user@{endsb}host.xz/path/to/repo.git/
-- ssh://{startsb}user@{endsb}host.xz/~user/path/to/repo.git/
-- ssh://{startsb}user@{endsb}host.xz/~/path/to/repo.git
+- git://host.xz{startsb}:port{endsb}/path/to/repo.git/
+- http{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/
+- ftp{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/
+- rsync://host.xz/path/to/repo.git/
 
-SSH is the default transport protocol over the network.  You can
-optionally specify which user to log-in as, and an alternate,
-scp-like syntax is also supported.  Both syntaxes support
-username expansion, as does the native git protocol, but
-only the former supports port specification. The following
-three are identical to the last three above, respectively:
+An alternative scp-like syntax may also be used with the ssh protocol:
 
-- {startsb}user@{endsb}host.xz:/path/to/repo.git/
-- {startsb}user@{endsb}host.xz:~user/path/to/repo.git/
-- {startsb}user@{endsb}host.xz:path/to/repo.git
+- {startsb}user@{endsb}host.xz:path/to/repo.git/
 
-To sync with a local directory, you can use:
+The ssh and git protocols additionally support ~username expansion:
+
+- ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/~{startsb}user{endsb}/path/to/repo.git/
+- git://host.xz{startsb}:port{endsb}/~{startsb}user{endsb}/path/to/repo.git/
+- {startsb}user@{endsb}host.xz:/~{startsb}user{endsb}/path/to/repo.git/
+
+For local respositories, also supported by git natively, the following
+syntaxes may be used:
 
 - /path/to/repo.git/
 - file:///path/to/repo.git/
 
 ifndef::git-clone[]
-They are mostly equivalent, except when cloning.  See
-linkgit:git-clone[1] for details.
+These two syntaxes are mostly equivalent, except when cloning, when
+the former implies --local option. See linkgit:git-clone[1] for
+details.
 endif::git-clone[]
 
 ifdef::git-clone[]
-They are equivalent, except the former implies --local option.
+These two syntaxes are mostly equivalent, except the former implies
+--local option.
 endif::git-clone[]
 
+When git doesn't know how to handle a certain transport protocol, it
+attempts to use the 'remote-<transport>' remote helper, if one
+exists. To explicitly request a remote helper, the following syntax
+may be used:
+
+- <transport>::<address>
+
+where <address> may be a path, a server and path, or an arbitrary
+URL-like string recognized by the specific remote helper being
+invoked. See linkgit:git-remote-helpers[1] for details.
 
 If there are a large number of similarly-named remote repositories and
 you want to use a different format for them (such that the URLs you
diff --git a/GIT-VERSION-GEN b/GIT-VERSION-GEN
index 8ccaba87b4..82fd72652b 100755
--- a/GIT-VERSION-GEN
+++ b/GIT-VERSION-GEN
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 GVF=GIT-VERSION-FILE
-DEF_VER=v1.7.0.6
+DEF_VER=v1.7.1
 
 LF='
 '
@@ -12,7 +12,7 @@ if test -f version
 then
 	VN=$(cat version) || VN="$DEF_VER"
 elif test -d .git -o -f .git &&
-	VN=$(git describe --abbrev=4 HEAD 2>/dev/null) &&
+	VN=$(git describe --match "v[0-9]*" --abbrev=4 HEAD 2>/dev/null) &&
 	case "$VN" in
 	*$LF*) (exit 1) ;;
 	v[0-9]*)
diff --git a/Makefile b/Makefile
index 5b86806606..b18768e0ae 100644
--- a/Makefile
+++ b/Makefile
@@ -31,10 +31,13 @@ all::
 # Define EXPATDIR=/foo/bar if your expat header and library files are in
 # /foo/bar/include and /foo/bar/lib directories.
 #
+# Define HAVE_PATHS_H if you have paths.h and want to use the default PATH
+# it specifies.
+#
 # Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
 #
 # Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
-# d_type in struct dirent (latest Cygwin -- will be fixed soonish).
+# d_type in struct dirent (Cygwin 1.5, fixed in Cygwin 1.7).
 #
 # Define NO_C99_FORMAT if your formatted IO functions (printf/scanf et.al.)
 # do not support the 'size specifiers' introduced by C99, namely ll, hh,
@@ -109,7 +112,7 @@ all::
 # Define NO_PTHREADS if you do not have or do not want to use Pthreads.
 #
 # Define NO_PREAD if you have a problem with pread() system call (e.g.
-# cygwin.dll before v1.5.22).
+# cygwin1.dll before v1.5.22).
 #
 # Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is
 # generally faster on your platform than accessing the working directory.
@@ -203,6 +206,9 @@ all::
 # Define JSMIN to point to JavaScript minifier that functions as
 # a filter to have gitweb.js minified.
 #
+# Define CSSMIN to point to a CSS minifier in order to generate a minified
+# version of gitweb.css
+#
 # Define DEFAULT_PAGER to a sensible pager command (defaults to "less") if
 # you want to use something different.  The value will be interpreted by the
 # shell at runtime when it is used.
@@ -214,6 +220,13 @@ all::
 #   DEFAULT_EDITOR='~/bin/vi',
 #   DEFAULT_EDITOR='$GIT_FALLBACK_EDITOR',
 #   DEFAULT_EDITOR='"C:\Program Files\Vim\gvim.exe" --nofork'
+#
+# Define COMPUTE_HEADER_DEPENDENCIES if your compiler supports the -MMD option
+# and you want to avoid rebuilding objects when an unrelated header file
+# changes.
+#
+# Define CHECK_HEADER_DEPENDENCIES to check for problems in the hard-coded
+# dependency rules.
 
 GIT-VERSION-FILE: FORCE
 	@$(SHELL_PATH) ./GIT-VERSION-GEN
@@ -272,9 +285,6 @@ lib = lib
 # DESTDIR=
 pathsep = :
 
-# JavaScript minifier invocation that can function as filter
-JSMIN =
-
 export prefix bindir sharedir sysconfdir
 
 CC = gcc
@@ -301,7 +311,7 @@ SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
 # Those must not be GNU-specific; they are shared with perl/ which may
 # be built by a different compiler. (Note that this is an artifact now
 # but it still might be nice to keep that distinction.)
-BASIC_CFLAGS =
+BASIC_CFLAGS = -I.
 BASIC_LDFLAGS =
 
 # Guard against environment variables
@@ -309,13 +319,16 @@ BUILTIN_OBJS =
 BUILT_INS =
 COMPAT_CFLAGS =
 COMPAT_OBJS =
+EXTRA_CPPFLAGS =
 LIB_H =
 LIB_OBJS =
+PROGRAM_OBJS =
 PROGRAMS =
 SCRIPT_PERL =
 SCRIPT_PYTHON =
 SCRIPT_SH =
-TEST_PROGRAMS =
+SCRIPT_LIB =
+TEST_PROGRAMS_NEED_X =
 
 # Having this variable in your environment would break pipelines because
 # you cause "cd" to echo its destination to stdout.  It can also take
@@ -332,20 +345,20 @@ SCRIPT_SH += git-merge-octopus.sh
 SCRIPT_SH += git-merge-one-file.sh
 SCRIPT_SH += git-merge-resolve.sh
 SCRIPT_SH += git-mergetool.sh
-SCRIPT_SH += git-mergetool--lib.sh
-SCRIPT_SH += git-notes.sh
-SCRIPT_SH += git-parse-remote.sh
 SCRIPT_SH += git-pull.sh
 SCRIPT_SH += git-quiltimport.sh
 SCRIPT_SH += git-rebase--interactive.sh
 SCRIPT_SH += git-rebase.sh
 SCRIPT_SH += git-repack.sh
 SCRIPT_SH += git-request-pull.sh
-SCRIPT_SH += git-sh-setup.sh
 SCRIPT_SH += git-stash.sh
 SCRIPT_SH += git-submodule.sh
 SCRIPT_SH += git-web--browse.sh
 
+SCRIPT_LIB += git-mergetool--lib
+SCRIPT_LIB += git-parse-remote
+SCRIPT_LIB += git-sh-setup
+
 SCRIPT_PERL += git-add--interactive.perl
 SCRIPT_PERL += git-difftool.perl
 SCRIPT_PERL += git-archimport.perl
@@ -366,16 +379,35 @@ EXTRA_PROGRAMS =
 
 # ... and all the rest that could be moved out of bindir to gitexecdir
 PROGRAMS += $(EXTRA_PROGRAMS)
-PROGRAMS += git-fast-import$X
-PROGRAMS += git-imap-send$X
-PROGRAMS += git-shell$X
-PROGRAMS += git-show-index$X
-PROGRAMS += git-upload-pack$X
-PROGRAMS += git-http-backend$X
+
+PROGRAM_OBJS += fast-import.o
+PROGRAM_OBJS += imap-send.o
+PROGRAM_OBJS += shell.o
+PROGRAM_OBJS += show-index.o
+PROGRAM_OBJS += upload-pack.o
+PROGRAM_OBJS += http-backend.o
+
+PROGRAMS += $(patsubst %.o,git-%$X,$(PROGRAM_OBJS))
+
+TEST_PROGRAMS_NEED_X += test-chmtime
+TEST_PROGRAMS_NEED_X += test-ctype
+TEST_PROGRAMS_NEED_X += test-date
+TEST_PROGRAMS_NEED_X += test-delta
+TEST_PROGRAMS_NEED_X += test-dump-cache-tree
+TEST_PROGRAMS_NEED_X += test-genrandom
+TEST_PROGRAMS_NEED_X += test-match-trees
+TEST_PROGRAMS_NEED_X += test-parse-options
+TEST_PROGRAMS_NEED_X += test-path-utils
+TEST_PROGRAMS_NEED_X += test-run-command
+TEST_PROGRAMS_NEED_X += test-sha1
+TEST_PROGRAMS_NEED_X += test-sigchain
+TEST_PROGRAMS_NEED_X += test-index-version
+
+TEST_PROGRAMS = $(patsubst %,%$X,$(TEST_PROGRAMS_NEED_X))
 
 # List built-in command $C whose implementation cmd_$C() is not in
-# builtin-$C.o but is linked in as part of some other command.
-BUILT_INS += $(patsubst builtin-%.o,git-%$X,$(BUILTIN_OBJS))
+# builtin/$C.o but is linked in as part of some other command.
+BUILT_INS += $(patsubst builtin/%.o,git-%$X,$(BUILTIN_OBJS))
 
 BUILT_INS += git-cherry$X
 BUILT_INS += git-cherry-pick$X
@@ -431,6 +463,7 @@ LIB_H += blob.h
 LIB_H += builtin.h
 LIB_H += cache.h
 LIB_H += cache-tree.h
+LIB_H += color.h
 LIB_H += commit.h
 LIB_H += compat/bswap.h
 LIB_H += compat/cygwin.h
@@ -442,6 +475,7 @@ LIB_H += delta.h
 LIB_H += diffcore.h
 LIB_H += diff.h
 LIB_H += dir.h
+LIB_H += exec_cmd.h
 LIB_H += fsck.h
 LIB_H += git-compat-util.h
 LIB_H += graph.h
@@ -484,7 +518,8 @@ LIB_H += tree-walk.h
 LIB_H += unpack-trees.h
 LIB_H += userdiff.h
 LIB_H += utf8.h
-LIB_H += wt-status.h
+LIB_H += xdiff-interface.h
+LIB_H += xdiff/xdiff.h
 
 LIB_OBJS += abspath.o
 LIB_OBJS += advice.o
@@ -598,95 +633,96 @@ LIB_OBJS += ws.o
 LIB_OBJS += wt-status.o
 LIB_OBJS += xdiff-interface.o
 
-BUILTIN_OBJS += builtin-add.o
-BUILTIN_OBJS += builtin-annotate.o
-BUILTIN_OBJS += builtin-apply.o
-BUILTIN_OBJS += builtin-archive.o
-BUILTIN_OBJS += builtin-bisect--helper.o
-BUILTIN_OBJS += builtin-blame.o
-BUILTIN_OBJS += builtin-branch.o
-BUILTIN_OBJS += builtin-bundle.o
-BUILTIN_OBJS += builtin-cat-file.o
-BUILTIN_OBJS += builtin-check-attr.o
-BUILTIN_OBJS += builtin-check-ref-format.o
-BUILTIN_OBJS += builtin-checkout-index.o
-BUILTIN_OBJS += builtin-checkout.o
-BUILTIN_OBJS += builtin-clean.o
-BUILTIN_OBJS += builtin-clone.o
-BUILTIN_OBJS += builtin-commit-tree.o
-BUILTIN_OBJS += builtin-commit.o
-BUILTIN_OBJS += builtin-config.o
-BUILTIN_OBJS += builtin-count-objects.o
-BUILTIN_OBJS += builtin-describe.o
-BUILTIN_OBJS += builtin-diff-files.o
-BUILTIN_OBJS += builtin-diff-index.o
-BUILTIN_OBJS += builtin-diff-tree.o
-BUILTIN_OBJS += builtin-diff.o
-BUILTIN_OBJS += builtin-fast-export.o
-BUILTIN_OBJS += builtin-fetch-pack.o
-BUILTIN_OBJS += builtin-fetch.o
-BUILTIN_OBJS += builtin-fmt-merge-msg.o
-BUILTIN_OBJS += builtin-for-each-ref.o
-BUILTIN_OBJS += builtin-fsck.o
-BUILTIN_OBJS += builtin-gc.o
-BUILTIN_OBJS += builtin-grep.o
-BUILTIN_OBJS += builtin-hash-object.o
-BUILTIN_OBJS += builtin-help.o
-BUILTIN_OBJS += builtin-index-pack.o
-BUILTIN_OBJS += builtin-init-db.o
-BUILTIN_OBJS += builtin-log.o
-BUILTIN_OBJS += builtin-ls-files.o
-BUILTIN_OBJS += builtin-ls-remote.o
-BUILTIN_OBJS += builtin-ls-tree.o
-BUILTIN_OBJS += builtin-mailinfo.o
-BUILTIN_OBJS += builtin-mailsplit.o
-BUILTIN_OBJS += builtin-merge.o
-BUILTIN_OBJS += builtin-merge-base.o
-BUILTIN_OBJS += builtin-merge-file.o
-BUILTIN_OBJS += builtin-merge-index.o
-BUILTIN_OBJS += builtin-merge-ours.o
-BUILTIN_OBJS += builtin-merge-recursive.o
-BUILTIN_OBJS += builtin-merge-tree.o
-BUILTIN_OBJS += builtin-mktag.o
-BUILTIN_OBJS += builtin-mktree.o
-BUILTIN_OBJS += builtin-mv.o
-BUILTIN_OBJS += builtin-name-rev.o
-BUILTIN_OBJS += builtin-pack-objects.o
-BUILTIN_OBJS += builtin-pack-redundant.o
-BUILTIN_OBJS += builtin-pack-refs.o
-BUILTIN_OBJS += builtin-patch-id.o
-BUILTIN_OBJS += builtin-prune-packed.o
-BUILTIN_OBJS += builtin-prune.o
-BUILTIN_OBJS += builtin-push.o
-BUILTIN_OBJS += builtin-read-tree.o
-BUILTIN_OBJS += builtin-receive-pack.o
-BUILTIN_OBJS += builtin-reflog.o
-BUILTIN_OBJS += builtin-remote.o
-BUILTIN_OBJS += builtin-replace.o
-BUILTIN_OBJS += builtin-rerere.o
-BUILTIN_OBJS += builtin-reset.o
-BUILTIN_OBJS += builtin-rev-list.o
-BUILTIN_OBJS += builtin-rev-parse.o
-BUILTIN_OBJS += builtin-revert.o
-BUILTIN_OBJS += builtin-rm.o
-BUILTIN_OBJS += builtin-send-pack.o
-BUILTIN_OBJS += builtin-shortlog.o
-BUILTIN_OBJS += builtin-show-branch.o
-BUILTIN_OBJS += builtin-show-ref.o
-BUILTIN_OBJS += builtin-stripspace.o
-BUILTIN_OBJS += builtin-symbolic-ref.o
-BUILTIN_OBJS += builtin-tag.o
-BUILTIN_OBJS += builtin-tar-tree.o
-BUILTIN_OBJS += builtin-unpack-file.o
-BUILTIN_OBJS += builtin-unpack-objects.o
-BUILTIN_OBJS += builtin-update-index.o
-BUILTIN_OBJS += builtin-update-ref.o
-BUILTIN_OBJS += builtin-update-server-info.o
-BUILTIN_OBJS += builtin-upload-archive.o
-BUILTIN_OBJS += builtin-var.o
-BUILTIN_OBJS += builtin-verify-pack.o
-BUILTIN_OBJS += builtin-verify-tag.o
-BUILTIN_OBJS += builtin-write-tree.o
+BUILTIN_OBJS += builtin/add.o
+BUILTIN_OBJS += builtin/annotate.o
+BUILTIN_OBJS += builtin/apply.o
+BUILTIN_OBJS += builtin/archive.o
+BUILTIN_OBJS += builtin/bisect--helper.o
+BUILTIN_OBJS += builtin/blame.o
+BUILTIN_OBJS += builtin/branch.o
+BUILTIN_OBJS += builtin/bundle.o
+BUILTIN_OBJS += builtin/cat-file.o
+BUILTIN_OBJS += builtin/check-attr.o
+BUILTIN_OBJS += builtin/check-ref-format.o
+BUILTIN_OBJS += builtin/checkout-index.o
+BUILTIN_OBJS += builtin/checkout.o
+BUILTIN_OBJS += builtin/clean.o
+BUILTIN_OBJS += builtin/clone.o
+BUILTIN_OBJS += builtin/commit-tree.o
+BUILTIN_OBJS += builtin/commit.o
+BUILTIN_OBJS += builtin/config.o
+BUILTIN_OBJS += builtin/count-objects.o
+BUILTIN_OBJS += builtin/describe.o
+BUILTIN_OBJS += builtin/diff-files.o
+BUILTIN_OBJS += builtin/diff-index.o
+BUILTIN_OBJS += builtin/diff-tree.o
+BUILTIN_OBJS += builtin/diff.o
+BUILTIN_OBJS += builtin/fast-export.o
+BUILTIN_OBJS += builtin/fetch-pack.o
+BUILTIN_OBJS += builtin/fetch.o
+BUILTIN_OBJS += builtin/fmt-merge-msg.o
+BUILTIN_OBJS += builtin/for-each-ref.o
+BUILTIN_OBJS += builtin/fsck.o
+BUILTIN_OBJS += builtin/gc.o
+BUILTIN_OBJS += builtin/grep.o
+BUILTIN_OBJS += builtin/hash-object.o
+BUILTIN_OBJS += builtin/help.o
+BUILTIN_OBJS += builtin/index-pack.o
+BUILTIN_OBJS += builtin/init-db.o
+BUILTIN_OBJS += builtin/log.o
+BUILTIN_OBJS += builtin/ls-files.o
+BUILTIN_OBJS += builtin/ls-remote.o
+BUILTIN_OBJS += builtin/ls-tree.o
+BUILTIN_OBJS += builtin/mailinfo.o
+BUILTIN_OBJS += builtin/mailsplit.o
+BUILTIN_OBJS += builtin/merge.o
+BUILTIN_OBJS += builtin/merge-base.o
+BUILTIN_OBJS += builtin/merge-file.o
+BUILTIN_OBJS += builtin/merge-index.o
+BUILTIN_OBJS += builtin/merge-ours.o
+BUILTIN_OBJS += builtin/merge-recursive.o
+BUILTIN_OBJS += builtin/merge-tree.o
+BUILTIN_OBJS += builtin/mktag.o
+BUILTIN_OBJS += builtin/mktree.o
+BUILTIN_OBJS += builtin/mv.o
+BUILTIN_OBJS += builtin/name-rev.o
+BUILTIN_OBJS += builtin/notes.o
+BUILTIN_OBJS += builtin/pack-objects.o
+BUILTIN_OBJS += builtin/pack-redundant.o
+BUILTIN_OBJS += builtin/pack-refs.o
+BUILTIN_OBJS += builtin/patch-id.o
+BUILTIN_OBJS += builtin/prune-packed.o
+BUILTIN_OBJS += builtin/prune.o
+BUILTIN_OBJS += builtin/push.o
+BUILTIN_OBJS += builtin/read-tree.o
+BUILTIN_OBJS += builtin/receive-pack.o
+BUILTIN_OBJS += builtin/reflog.o
+BUILTIN_OBJS += builtin/remote.o
+BUILTIN_OBJS += builtin/replace.o
+BUILTIN_OBJS += builtin/rerere.o
+BUILTIN_OBJS += builtin/reset.o
+BUILTIN_OBJS += builtin/rev-list.o
+BUILTIN_OBJS += builtin/rev-parse.o
+BUILTIN_OBJS += builtin/revert.o
+BUILTIN_OBJS += builtin/rm.o
+BUILTIN_OBJS += builtin/send-pack.o
+BUILTIN_OBJS += builtin/shortlog.o
+BUILTIN_OBJS += builtin/show-branch.o
+BUILTIN_OBJS += builtin/show-ref.o
+BUILTIN_OBJS += builtin/stripspace.o
+BUILTIN_OBJS += builtin/symbolic-ref.o
+BUILTIN_OBJS += builtin/tag.o
+BUILTIN_OBJS += builtin/tar-tree.o
+BUILTIN_OBJS += builtin/unpack-file.o
+BUILTIN_OBJS += builtin/unpack-objects.o
+BUILTIN_OBJS += builtin/update-index.o
+BUILTIN_OBJS += builtin/update-ref.o
+BUILTIN_OBJS += builtin/update-server-info.o
+BUILTIN_OBJS += builtin/upload-archive.o
+BUILTIN_OBJS += builtin/var.o
+BUILTIN_OBJS += builtin/verify-pack.o
+BUILTIN_OBJS += builtin/verify-tag.o
+BUILTIN_OBJS += builtin/write-tree.o
 
 GITLIBS = $(LIB_FILE) $(XDIFF_LIB)
 EXTLIBS =
@@ -702,10 +738,12 @@ EXTLIBS =
 ifeq ($(uname_S),Linux)
 	NO_STRLCPY = YesPlease
 	NO_MKSTEMPS = YesPlease
+	HAVE_PATHS_H = YesPlease
 endif
 ifeq ($(uname_S),GNU/kFreeBSD)
 	NO_STRLCPY = YesPlease
 	NO_MKSTEMPS = YesPlease
+	HAVE_PATHS_H = YesPlease
 endif
 ifeq ($(uname_S),UnixWare)
 	CC = cc
@@ -798,22 +836,24 @@ ifeq ($(uname_S),SunOS)
 	BASIC_CFLAGS += -D__EXTENSIONS__ -D__sun__ -DHAVE_ALLOCA_H
 endif
 ifeq ($(uname_O),Cygwin)
-	NO_D_TYPE_IN_DIRENT = YesPlease
-	NO_D_INO_IN_DIRENT = YesPlease
-	NO_STRCASESTR = YesPlease
-	NO_MEMMEM = YesPlease
-	NO_MKSTEMPS = YesPlease
-	NO_SYMLINK_HEAD = YesPlease
+	ifeq ($(shell expr "$(uname_R)" : '1\.[1-6]\.'),4)
+		NO_D_TYPE_IN_DIRENT = YesPlease
+		NO_D_INO_IN_DIRENT = YesPlease
+		NO_STRCASESTR = YesPlease
+		NO_MEMMEM = YesPlease
+		NO_MKSTEMPS = YesPlease
+		NO_SYMLINK_HEAD = YesPlease
+		NO_IPV6 = YesPlease
+		OLD_ICONV = UnfortunatelyYes
+	endif
 	NEEDS_LIBICONV = YesPlease
 	NO_FAST_WORKING_DIRECTORY = UnfortunatelyYes
 	NO_TRUSTABLE_FILEMODE = UnfortunatelyYes
-	OLD_ICONV = UnfortunatelyYes
 	NO_ST_BLOCKS_IN_STRUCT_STAT = YesPlease
 	# There are conflicting reports about this.
 	# On some boxes NO_MMAP is needed, and not so elsewhere.
 	# Try commenting this out if you suspect MMAP is more efficient
 	NO_MMAP = YesPlease
-	NO_IPV6 = YesPlease
 	X = .exe
 	COMPAT_OBJS += compat/cygwin.o
 	UNRELIABLE_FSTAT = UnfortunatelyYes
@@ -832,6 +872,7 @@ ifeq ($(uname_S),FreeBSD)
 		NO_STRTOUMAX = YesPlease
 	endif
 	PYTHON_PATH = /usr/local/bin/python
+	HAVE_PATHS_H = YesPlease
 endif
 ifeq ($(uname_S),OpenBSD)
 	NO_STRCASESTR = YesPlease
@@ -840,6 +881,7 @@ ifeq ($(uname_S),OpenBSD)
 	NEEDS_LIBICONV = YesPlease
 	BASIC_CFLAGS += -I/usr/local/include
 	BASIC_LDFLAGS += -L/usr/local/lib
+	HAVE_PATHS_H = YesPlease
 endif
 ifeq ($(uname_S),NetBSD)
 	ifeq ($(shell expr "$(uname_R)" : '[01]\.'),2)
@@ -849,8 +891,10 @@ ifeq ($(uname_S),NetBSD)
 	BASIC_LDFLAGS += -L/usr/pkg/lib $(CC_LD_DYNPATH)/usr/pkg/lib
 	USE_ST_TIMESPEC = YesPlease
 	NO_MKSTEMPS = YesPlease
+	HAVE_PATHS_H = YesPlease
 endif
 ifeq ($(uname_S),AIX)
+	DEFAULT_PAGER = more
 	NO_STRCASESTR=YesPlease
 	NO_MEMMEM = YesPlease
 	NO_MKDTEMP = YesPlease
@@ -869,6 +913,7 @@ ifeq ($(uname_S),GNU)
 	# GNU/Hurd
 	NO_STRLCPY=YesPlease
 	NO_MKSTEMPS = YesPlease
+	HAVE_PATHS_H = YesPlease
 endif
 ifeq ($(uname_S),IRIX)
 	NO_SETENV = YesPlease
@@ -887,7 +932,6 @@ ifeq ($(uname_S),IRIX)
 	SNPRINTF_RETURNS_BOGUS = YesPlease
 	SHELL_PATH = /usr/gnu/bin/bash
 	NEEDS_LIBGEN = YesPlease
-	NEEDS_LIBICONV = YesPlease
 endif
 ifeq ($(uname_S),IRIX64)
 	NO_SETENV=YesPlease
@@ -906,7 +950,6 @@ ifeq ($(uname_S),IRIX64)
 	SNPRINTF_RETURNS_BOGUS = YesPlease
 	SHELL_PATH=/usr/gnu/bin/bash
 	NEEDS_LIBGEN = YesPlease
-	NEEDS_LIBICONV = YesPlease
 endif
 ifeq ($(uname_S),HP-UX)
 	NO_IPV6=YesPlease
@@ -1029,6 +1072,14 @@ endif
 -include config.mak.autogen
 -include config.mak
 
+ifdef CHECK_HEADER_DEPENDENCIES
+USE_COMPUTED_HEADER_DEPENDENCIES =
+endif
+
+ifdef COMPUTE_HEADER_DEPENDENCIES
+USE_COMPUTED_HEADER_DEPENDENCIES = YesPlease
+endif
+
 ifdef SANE_TOOL_PATH
 SANE_TOOL_PATH_SQ = $(subst ','\'',$(SANE_TOOL_PATH))
 BROKEN_PATH_FIX = 's|^\# @@BROKEN_PATH_FIX@@$$|git_broken_path_fix $(SANE_TOOL_PATH_SQ)|'
@@ -1084,11 +1135,12 @@ else
 	REMOTE_CURL_PRIMARY = git-remote-http$X
 	REMOTE_CURL_ALIASES = git-remote-https$X git-remote-ftp$X git-remote-ftps$X
 	REMOTE_CURL_NAMES = $(REMOTE_CURL_PRIMARY) $(REMOTE_CURL_ALIASES)
-	PROGRAMS += $(REMOTE_CURL_NAMES) git-http-fetch$X
+	PROGRAM_OBJS += http-fetch.o
+	PROGRAMS += $(REMOTE_CURL_NAMES)
 	curl_check := $(shell (echo 070908; curl-config --vernum) | sort -r | sed -ne 2p)
 	ifeq "$(curl_check)" "070908"
 		ifndef NO_EXPAT
-			PROGRAMS += git-http-push$X
+			PROGRAM_OBJS += http-push.o
 		endif
 	endif
 	ifndef NO_EXPAT
@@ -1108,7 +1160,7 @@ endif
 EXTLIBS += -lz
 
 ifndef NO_POSIX_ONLY_PROGRAMS
-	PROGRAMS += git-daemon$X
+	PROGRAM_OBJS += daemon.o
 endif
 ifndef NO_OPENSSL
 	OPENSSL_LIBSSL = -lssl
@@ -1274,10 +1326,12 @@ endif
 ifdef BLK_SHA1
 	SHA1_HEADER = "block-sha1/sha1.h"
 	LIB_OBJS += block-sha1/sha1.o
+	LIB_H += block-sha1/sha1.h
 else
 ifdef PPC_SHA1
 	SHA1_HEADER = "ppc/sha1.h"
 	LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o
+	LIB_H += ppc/sha1.h
 else
 	SHA1_HEADER = <openssl/sha.h>
 	EXTLIBS += $(LIB_4_CRYPTO)
@@ -1309,6 +1363,10 @@ else
 	LIB_OBJS += thread-utils.o
 endif
 
+ifdef HAVE_PATHS_H
+	BASIC_CFLAGS += -DHAVE_PATHS_H
+endif
+
 ifdef DIR_HAS_BSD_GROUP_SEMANTICS
 	COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS
 endif
@@ -1419,7 +1477,7 @@ export TAR INSTALL DESTDIR SHELL_PATH
 
 SHELL = $(SHELL_PATH)
 
-all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) GIT-BUILD-OPTIONS
+all:: shell_compatibility_test $(ALL_PROGRAMS) $(SCRIPT_LIB) $(BUILT_INS) $(OTHER_PROGRAMS) GIT-BUILD-OPTIONS
 ifneq (,$X)
 	$(QUIET_BUILT_IN)$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) git$X)), test -d '$p' -o '$p' -ef '$p$X' || $(RM) '$p';)
 endif
@@ -1435,7 +1493,7 @@ endif
 ifndef NO_PYTHON
 	$(QUIET_SUBDIR0)git_remote_helpers $(QUIET_SUBDIR1) PYTHON_PATH='$(PYTHON_PATH_SQ)' prefix='$(prefix_SQ)' all
 endif
-	$(QUIET_SUBDIR0)templates $(QUIET_SUBDIR1)
+	$(QUIET_SUBDIR0)templates $(QUIET_SUBDIR1) SHELL_PATH='$(SHELL_PATH_SQ)' PERL_PATH='$(PERL_PATH_SQ)'
 
 please_set_SHELL_PATH_to_a_more_modern_shell:
 	@$$(:)
@@ -1446,15 +1504,15 @@ strip: $(PROGRAMS) git$X
 	$(STRIP) $(STRIP_OPTS) $(PROGRAMS) git$X
 
 git.o: common-cmds.h
-git.s git.o: ALL_CFLAGS += -DGIT_VERSION='"$(GIT_VERSION)"' \
+git.s git.o: EXTRA_CPPFLAGS = -DGIT_VERSION='"$(GIT_VERSION)"' \
 	'-DGIT_HTML_PATH="$(htmldir_SQ)"'
 
 git$X: git.o $(BUILTIN_OBJS) $(GITLIBS)
 	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ git.o \
 		$(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS)
 
-builtin-help.o: common-cmds.h
-builtin-help.s builtin-help.o: ALL_CFLAGS += \
+builtin/help.o: common-cmds.h
+builtin/help.s builtin/help.o: EXTRA_CPPFLAGS = \
 	'-DGIT_HTML_PATH="$(htmldir_SQ)"' \
 	'-DGIT_MAN_PATH="$(mandir_SQ)"' \
 	'-DGIT_INFO_PATH="$(infodir_SQ)"'
@@ -1470,17 +1528,25 @@ common-cmds.h: ./generate-cmdlist.sh command-list.txt
 common-cmds.h: $(wildcard Documentation/git-*.txt)
 	$(QUIET_GEN)./generate-cmdlist.sh > $@+ && mv $@+ $@
 
+define cmd_munge_script
+$(RM) $@ $@+ && \
+sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
+    -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
+    -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
+    -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
+    -e $(BROKEN_PATH_FIX) \
+    $@.sh >$@+
+endef
+
 $(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
-	$(QUIET_GEN)$(RM) $@ $@+ && \
-	sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
-	    -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
-	    -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
-	    -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
-	    -e $(BROKEN_PATH_FIX) \
-	    $@.sh >$@+ && \
+	$(QUIET_GEN)$(cmd_munge_script) && \
 	chmod +x $@+ && \
 	mv $@+ $@
 
+$(SCRIPT_LIB) : % : %.sh
+	$(QUIET_GEN)$(cmd_munge_script) && \
+	mv $@+ $@
+
 ifndef NO_PERL
 $(patsubst %.perl,%,$(SCRIPT_PERL)): perl/perl.mak
 
@@ -1509,18 +1575,29 @@ gitweb:
 	$(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) all
 
 ifdef JSMIN
-OTHER_PROGRAMS += gitweb/gitweb.cgi   gitweb/gitweb.min.js
-gitweb/gitweb.cgi: gitweb/gitweb.perl gitweb/gitweb.min.js
+GITWEB_PROGRAMS += gitweb/gitweb.min.js
+GITWEB_JS = gitweb/gitweb.min.js
+else
+GITWEB_JS = gitweb/gitweb.js
+endif
+ifdef CSSMIN
+GITWEB_PROGRAMS += gitweb/gitweb.min.css
+GITWEB_CSS = gitweb/gitweb.min.css
 else
-OTHER_PROGRAMS += gitweb/gitweb.cgi
-gitweb/gitweb.cgi: gitweb/gitweb.perl
+GITWEB_CSS = gitweb/gitweb.css
 endif
+OTHER_PROGRAMS +=  gitweb/gitweb.cgi  $(GITWEB_PROGRAMS)
+gitweb/gitweb.cgi: gitweb/gitweb.perl $(GITWEB_PROGRAMS)
 	$(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@)
 
 ifdef JSMIN
 gitweb/gitweb.min.js: gitweb/gitweb.js
 	$(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@)
 endif # JSMIN
+ifdef CSSMIN
+gitweb/gitweb.min.css: gitweb/gitweb.css
+	$(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@)
+endif # CSSMIN
 
 
 git-instaweb: git-instaweb.sh gitweb/gitweb.cgi gitweb/gitweb.css gitweb/gitweb.js
@@ -1530,11 +1607,13 @@ git-instaweb: git-instaweb.sh gitweb/gitweb.cgi gitweb/gitweb.css gitweb/gitweb.
 	    -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
 	    -e '/@@GITWEB_CGI@@/r gitweb/gitweb.cgi' \
 	    -e '/@@GITWEB_CGI@@/d' \
-	    -e '/@@GITWEB_CSS@@/r gitweb/gitweb.css' \
+	    -e '/@@GITWEB_CSS@@/r $(GITWEB_CSS)' \
 	    -e '/@@GITWEB_CSS@@/d' \
-	    -e '/@@GITWEB_JS@@/r gitweb/gitweb.js' \
+	    -e '/@@GITWEB_JS@@/r $(GITWEB_JS)' \
 	    -e '/@@GITWEB_JS@@/d' \
 	    -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
+            -e 's|@@GITWEB_CSS_NAME@@|$(GITWEB_CSS)|' \
+            -e 's|@@GITWEB_JS_NAME@@|$(GITWEB_JS)|' \
 	    $@.sh > $@+ && \
 	chmod +x $@+ && \
 	mv $@+ $@
@@ -1589,28 +1668,148 @@ git.o git.spec \
 	$(patsubst %.perl,%,$(SCRIPT_PERL)) \
 	: GIT-VERSION-FILE
 
-%.o: %.c GIT-CFLAGS
-	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) $<
+TEST_OBJS := $(patsubst test-%$X,test-%.o,$(TEST_PROGRAMS))
+GIT_OBJS := $(LIB_OBJS) $(BUILTIN_OBJS) $(PROGRAM_OBJS) $(TEST_OBJS) \
+	git.o http.o http-walker.o remote-curl.o
+XDIFF_OBJS = xdiff/xdiffi.o xdiff/xprepare.o xdiff/xutils.o xdiff/xemit.o \
+	xdiff/xmerge.o xdiff/xpatience.o
+OBJECTS := $(GIT_OBJS) $(XDIFF_OBJS)
+
+dep_files := $(foreach f,$(OBJECTS),$(dir $f).depend/$(notdir $f).d)
+dep_dirs := $(addsuffix .depend,$(sort $(dir $(OBJECTS))))
+
+ifdef COMPUTE_HEADER_DEPENDENCIES
+$(dep_dirs):
+	mkdir -p $@
+
+missing_dep_dirs := $(filter-out $(wildcard $(dep_dirs)),$(dep_dirs))
+dep_file = $(dir $@).depend/$(notdir $@).d
+dep_args = -MF $(dep_file) -MMD -MP
+ifdef CHECK_HEADER_DEPENDENCIES
+$(error cannot compute header dependencies outside a normal build. \
+Please unset CHECK_HEADER_DEPENDENCIES and try again)
+endif
+endif
+
+ifndef COMPUTE_HEADER_DEPENDENCIES
+ifndef CHECK_HEADER_DEPENDENCIES
+dep_dirs =
+missing_dep_dirs =
+dep_args =
+endif
+endif
+
+ifdef CHECK_HEADER_DEPENDENCIES
+ifndef PRINT_HEADER_DEPENDENCIES
+missing_deps = $(filter-out $(notdir $^), \
+	$(notdir $(shell $(MAKE) -s $@ \
+		CHECK_HEADER_DEPENDENCIES=YesPlease \
+		USE_COMPUTED_HEADER_DEPENDENCIES=YesPlease \
+		PRINT_HEADER_DEPENDENCIES=YesPlease)))
+endif
+endif
+
+ASM_SRC := $(wildcard $(OBJECTS:o=S))
+ASM_OBJ := $(ASM_SRC:S=o)
+C_OBJ := $(filter-out $(ASM_OBJ),$(OBJECTS))
+
+.SUFFIXES:
+
+ifdef PRINT_HEADER_DEPENDENCIES
+$(C_OBJ): %.o: %.c FORCE
+	echo $^
+$(ASM_OBJ): %.o: %.S FORCE
+	echo $^
+
+ifndef CHECK_HEADER_DEPENDENCIES
+$(error cannot print header dependencies during a normal build. \
+Please set CHECK_HEADER_DEPENDENCIES and try again)
+endif
+endif
+
+ifndef PRINT_HEADER_DEPENDENCIES
+ifdef CHECK_HEADER_DEPENDENCIES
+$(C_OBJ): %.o: %.c $(dep_files) FORCE
+	@set -e; echo CHECK $@; \
+	missing_deps="$(missing_deps)"; \
+	if test "$$missing_deps"; \
+	then \
+		echo missing dependencies: $$missing_deps; \
+		false; \
+	fi
+$(ASM_OBJ): %.o: %.S $(dep_files) FORCE
+	@set -e; echo CHECK $@; \
+	missing_deps="$(missing_deps)"; \
+	if test "$$missing_deps"; \
+	then \
+		echo missing dependencies: $$missing_deps; \
+		false; \
+	fi
+endif
+endif
+
+ifndef CHECK_HEADER_DEPENDENCIES
+$(C_OBJ): %.o: %.c GIT-CFLAGS $(missing_dep_dirs)
+	$(QUIET_CC)$(CC) -o $*.o -c $(dep_args) $(ALL_CFLAGS) $(EXTRA_CPPFLAGS) $<
+$(ASM_OBJ): %.o: %.S GIT-CFLAGS $(missing_dep_dirs)
+	$(QUIET_CC)$(CC) -o $*.o -c $(dep_args) $(ALL_CFLAGS) $(EXTRA_CPPFLAGS) $<
+endif
+
 %.s: %.c GIT-CFLAGS FORCE
-	$(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $<
-%.o: %.S GIT-CFLAGS
-	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) $<
+	$(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $(EXTRA_CPPFLAGS) $<
 
-exec_cmd.s exec_cmd.o: ALL_CFLAGS += \
+ifdef USE_COMPUTED_HEADER_DEPENDENCIES
+# Take advantage of gcc's on-the-fly dependency generation
+# See <http://gcc.gnu.org/gcc-3.0/features.html>.
+dep_files_present := $(wildcard $(dep_files))
+ifneq ($(dep_files_present),)
+include $(dep_files_present)
+endif
+else
+# Dependencies on header files, for platforms that do not support
+# the gcc -MMD option.
+#
+# Dependencies on automatically generated headers such as common-cmds.h
+# should _not_ be included here, since they are necessary even when
+# building an object for the first time.
+#
+# XXX. Please check occasionally that these include all dependencies
+# gcc detects!
+
+$(GIT_OBJS): $(LIB_H)
+builtin/branch.o builtin/checkout.o builtin/clone.o builtin/reset.o branch.o transport.o: branch.h
+builtin/bundle.o bundle.o transport.o: bundle.h
+builtin/bisect--helper.o builtin/rev-list.o bisect.o: bisect.h
+builtin/clone.o builtin/fetch-pack.o transport.o: fetch-pack.h
+builtin/grep.o: thread-utils.h
+builtin/send-pack.o transport.o: send-pack.h
+builtin/log.o builtin/shortlog.o: shortlog.h
+builtin/prune.o builtin/reflog.o reachable.o: reachable.h
+builtin/commit.o builtin/revert.o wt-status.o: wt-status.h
+builtin/tar-tree.o archive-tar.o: tar.h
+builtin/pack-objects.o: thread-utils.h
+http-fetch.o http-walker.o remote-curl.o transport.o walker.o: walker.h
+http.o http-walker.o http-push.o remote-curl.o: http.h
+
+xdiff-interface.o $(XDIFF_OBJS): \
+	xdiff/xinclude.h xdiff/xmacros.h xdiff/xdiff.h xdiff/xtypes.h \
+	xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h
+endif
+
+exec_cmd.s exec_cmd.o: EXTRA_CPPFLAGS = \
 	'-DGIT_EXEC_PATH="$(gitexecdir_SQ)"' \
 	'-DBINDIR="$(bindir_relative_SQ)"' \
 	'-DPREFIX="$(prefix_SQ)"'
 
-builtin-init-db.s builtin-init-db.o: ALL_CFLAGS += \
+builtin/init-db.s builtin/init-db.o: EXTRA_CPPFLAGS = \
 	-DDEFAULT_GIT_TEMPLATE_DIR='"$(template_dir_SQ)"'
 
-config.s config.o: ALL_CFLAGS += -DETC_GITCONFIG='"$(ETC_GITCONFIG_SQ)"'
+config.s config.o: EXTRA_CPPFLAGS = -DETC_GITCONFIG='"$(ETC_GITCONFIG_SQ)"'
 
-http.s http.o: ALL_CFLAGS += -DGIT_USER_AGENT='"git/$(GIT_VERSION)"'
+http.s http.o: EXTRA_CPPFLAGS = -DGIT_USER_AGENT='"git/$(GIT_VERSION)"'
 
 ifdef NO_EXPAT
-http-walker.o: http.h
-http-walker.s http-walker.o: ALL_CFLAGS += -DNO_EXPAT
+http-walker.s http-walker.o: EXTRA_CPPFLAGS = -DNO_EXPAT
 endif
 
 git-%$X: %.o $(GITLIBS)
@@ -1620,10 +1819,6 @@ git-imap-send$X: imap-send.o $(GITLIBS)
 	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
 		$(LIBS) $(OPENSSL_LINK) $(OPENSSL_LIBSSL)
 
-http.o http-walker.o http-push.o: http.h
-
-http.o http-walker.o: $(LIB_H)
-
 git-http-fetch$X: revision.o http.o http-walker.o http-fetch.o $(GITLIBS)
 	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
 		$(LIBS) $(CURL_LIBCURL)
@@ -1641,18 +1836,9 @@ $(REMOTE_CURL_PRIMARY): remote-curl.o http.o http-walker.o $(GITLIBS)
 	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
 		$(LIBS) $(CURL_LIBCURL) $(EXPAT_LIBEXPAT)
 
-$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
-$(patsubst git-%$X,%.o,$(PROGRAMS)) git.o: $(LIB_H) $(wildcard */*.h)
-builtin-revert.o wt-status.o: wt-status.h
-
 $(LIB_FILE): $(LIB_OBJS)
 	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
 
-XDIFF_OBJS=xdiff/xdiffi.o xdiff/xprepare.o xdiff/xutils.o xdiff/xemit.o \
-	xdiff/xmerge.o xdiff/xpatience.o
-$(XDIFF_OBJS): xdiff/xinclude.h xdiff/xmacros.h xdiff/xdiff.h xdiff/xtypes.h \
-	xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h
-
 $(XDIFF_LIB): $(XDIFF_OBJS)
 	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(XDIFF_OBJS)
 
@@ -1718,24 +1904,6 @@ GIT-GUI-VARS: FORCE
             fi
 endif
 
-### Testing rules
-
-TEST_PROGRAMS_NEED_X += test-chmtime
-TEST_PROGRAMS_NEED_X += test-ctype
-TEST_PROGRAMS_NEED_X += test-date
-TEST_PROGRAMS_NEED_X += test-delta
-TEST_PROGRAMS_NEED_X += test-dump-cache-tree
-TEST_PROGRAMS_NEED_X += test-genrandom
-TEST_PROGRAMS_NEED_X += test-match-trees
-TEST_PROGRAMS_NEED_X += test-parse-options
-TEST_PROGRAMS_NEED_X += test-path-utils
-TEST_PROGRAMS_NEED_X += test-run-command
-TEST_PROGRAMS_NEED_X += test-sha1
-TEST_PROGRAMS_NEED_X += test-sigchain
-TEST_PROGRAMS_NEED_X += test-index-version
-
-TEST_PROGRAMS = $(patsubst %,%$X,$(TEST_PROGRAMS_NEED_X))
-
 test_bindir_programs := $(patsubst %,bin-wrappers/%,$(BINDIR_PROGRAMS_NEED_X) $(BINDIR_PROGRAMS_NO_X) $(TEST_PROGRAMS_NEED_X))
 
 all:: $(TEST_PROGRAMS) $(test_bindir_programs)
@@ -1753,6 +1921,8 @@ bin-wrappers/%: wrap-for-bin.sh
 
 export NO_SVN_TESTS
 
+### Testing rules
+
 test: all
 	$(MAKE) -C t/ all
 
@@ -1764,9 +1934,7 @@ test-delta$X: diff-delta.o patch-delta.o
 
 test-parse-options$X: parse-options.o
 
-test-parse-options.o: parse-options.h
-
-.PRECIOUS: $(patsubst test-%$X,test-%.o,$(TEST_PROGRAMS))
+.PRECIOUS: $(TEST_OBJS)
 
 test-%$X: test-%.o $(GITLIBS)
 	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
@@ -1812,6 +1980,7 @@ install: all
 	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
 	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
 	$(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
+	$(INSTALL) -m 644 $(SCRIPT_LIB) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
 	$(INSTALL) $(install_bindir_programs) '$(DESTDIR_SQ)$(bindir_SQ)'
 	$(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install
 ifndef NO_PERL
@@ -1841,12 +2010,13 @@ endif
 		ln -s "git$X" "$$execdir/$$p" 2>/dev/null || \
 		cp "$$execdir/git$X" "$$execdir/$$p" || exit; \
 	  done; } && \
-	{ for p in $(REMOTE_CURL_ALIASES); do \
+	{ test x"$(REMOTE_CURL_ALIASES)" = x || \
+		{ for p in $(REMOTE_CURL_ALIASES); do \
 		$(RM) "$$execdir/$$p" && \
 		ln "$$execdir/git-remote-http$X" "$$execdir/$$p" 2>/dev/null || \
 		ln -s "git-remote-http$X" "$$execdir/$$p" 2>/dev/null || \
 		cp "$$execdir/git-remote-http$X" "$$execdir/$$p" || exit; \
-	  done; } && \
+	  done; } ; } && \
 	./check_bindir "z$$bindir" "z$$execdir" "$$bindir/git-add$X"
 
 install-doc:
@@ -1930,10 +2100,11 @@ distclean: clean
 
 clean:
 	$(RM) *.o block-sha1/*.o ppc/*.o compat/*.o compat/*/*.o xdiff/*.o \
-		$(LIB_FILE) $(XDIFF_LIB)
-	$(RM) $(ALL_PROGRAMS) $(BUILT_INS) git$X
+		builtin/*.o $(LIB_FILE) $(XDIFF_LIB)
+	$(RM) $(ALL_PROGRAMS) $(SCRIPT_LIB) $(BUILT_INS) git$X
 	$(RM) $(TEST_PROGRAMS)
 	$(RM) -r bin-wrappers
+	$(RM) -r $(dep_dirs)
 	$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
 	$(RM) -r autom4te.cache
 	$(RM) config.log config.mak.autogen config.mak.append config.status config.cache
@@ -1942,7 +2113,7 @@ clean:
 	$(RM) $(htmldocs).tar.gz $(manpages).tar.gz
 	$(MAKE) -C Documentation/ clean
 ifndef NO_PERL
-	$(RM) gitweb/gitweb.cgi
+	$(MAKE) -C gitweb clean
 	$(MAKE) -C perl clean
 endif
 ifndef NO_PYTHON
@@ -1963,12 +2134,13 @@ endif
 ### Check documentation
 #
 check-docs::
-	@(for v in $(ALL_PROGRAMS) $(BUILT_INS) git gitk; \
+	@(for v in $(ALL_PROGRAMS) $(SCRIPT_LIB) $(BUILT_INS) git gitk; \
 	do \
 		case "$$v" in \
 		git-merge-octopus | git-merge-ours | git-merge-recursive | \
 		git-merge-resolve | git-merge-subtree | \
 		git-fsck-objects | git-init-db | \
+		git-remote-* | git-stage | \
 		git-?*--?* ) continue ;; \
 		esac ; \
 		test -f "Documentation/$$v.txt" || \
@@ -2006,9 +2178,12 @@ check-docs::
 		documented,gitrepository-layout | \
 		documented,gittutorial | \
 		documented,gittutorial-2 | \
+		documented,git-bisect-lk2009 | \
+		documented,git-remote-helpers | \
+		documented,gitworkflows | \
 		sentinel,not,matching,is,ok ) continue ;; \
 		esac; \
-		case " $(ALL_PROGRAMS) $(BUILT_INS) git gitk " in \
+		case " $(ALL_PROGRAMS) $(SCRIPT_LIB) $(BUILT_INS) git gitk " in \
 		*" $$cmd "*)	;; \
 		*) echo "removed but $$how: $$cmd" ;; \
 		esac; \
diff --git a/RelNotes b/RelNotes
index a9713ed412..136c1b6afa 120000
--- a/RelNotes
+++ b/RelNotes
@@ -1 +1 @@
-Documentation/RelNotes-1.7.0.6.txt
\ No newline at end of file
+Documentation/RelNotes-1.7.1.1.txt
\ No newline at end of file
diff --git a/abspath.c b/abspath.c
index b88122cbe7..c91a29cb29 100644
--- a/abspath.c
+++ b/abspath.c
@@ -54,8 +54,9 @@ const char *make_absolute_path(const char *path)
 			if (len + strlen(last_elem) + 2 > PATH_MAX)
 				die ("Too long path name: '%s/%s'",
 						buf, last_elem);
-			buf[len] = '/';
-			strcpy(buf + len + 1, last_elem);
+			if (len && buf[len-1] != '/')
+				buf[len++] = '/';
+			strcpy(buf + len, last_elem);
 			free(last_elem);
 			last_elem = NULL;
 		}
diff --git a/attr.c b/attr.c
index f5346ed32a..7467baf2d6 100644
--- a/attr.c
+++ b/attr.c
@@ -594,20 +594,25 @@ static int path_matches(const char *pathname, int pathlen,
 	return fnmatch(pattern, pathname + baselen, FNM_PATHNAME) == 0;
 }
 
+static int macroexpand_one(int attr_nr, int rem);
+
 static int fill_one(const char *what, struct match_attr *a, int rem)
 {
 	struct git_attr_check *check = check_all_attr;
 	int i;
 
-	for (i = 0; 0 < rem && i < a->num_attr; i++) {
+	for (i = a->num_attr - 1; 0 < rem && 0 <= i; i--) {
 		struct git_attr *attr = a->state[i].attr;
 		const char **n = &(check[attr->attr_nr].value);
 		const char *v = a->state[i].setto;
 
 		if (*n == ATTR__UNKNOWN) {
-			debug_set(what, a->u.pattern, attr, v);
+			debug_set(what,
+				  a->is_macro ? a->u.attr->name : a->u.pattern,
+				  attr, v);
 			*n = v;
 			rem--;
+			rem = macroexpand_one(attr->attr_nr, rem);
 		}
 	}
 	return rem;
@@ -629,19 +634,27 @@ static int fill(const char *path, int pathlen, struct attr_stack *stk, int rem)
 	return rem;
 }
 
-static int macroexpand(struct attr_stack *stk, int rem)
+static int macroexpand_one(int attr_nr, int rem)
 {
+	struct attr_stack *stk;
+	struct match_attr *a = NULL;
 	int i;
-	struct git_attr_check *check = check_all_attr;
 
-	for (i = stk->num_matches - 1; 0 < rem && 0 <= i; i--) {
-		struct match_attr *a = stk->attrs[i];
-		if (!a->is_macro)
-			continue;
-		if (check[a->u.attr->attr_nr].value != ATTR__TRUE)
-			continue;
+	if (check_all_attr[attr_nr].value != ATTR__TRUE)
+		return rem;
+
+	for (stk = attr_stack; !a && stk; stk = stk->prev)
+		for (i = stk->num_matches - 1; !a && 0 <= i; i--) {
+			struct match_attr *ma = stk->attrs[i];
+			if (!ma->is_macro)
+				continue;
+			if (ma->u.attr->attr_nr == attr_nr)
+				a = ma;
+		}
+
+	if (a)
 		rem = fill_one("expand", a, rem);
-	}
+
 	return rem;
 }
 
@@ -666,9 +679,6 @@ int git_checkattr(const char *path, int num, struct git_attr_check *check)
 	for (stk = attr_stack; 0 < rem && stk; stk = stk->prev)
 		rem = fill(path, pathlen, stk, rem);
 
-	for (stk = attr_stack; 0 < rem && stk; stk = stk->prev)
-		rem = macroexpand(stk, rem);
-
 	for (i = 0; i < num; i++) {
 		const char *value = check_all_attr[check[i].attr->attr_nr].value;
 		if (value == ATTR__UNKNOWN)
diff --git a/builtin.h b/builtin.h
index e8202f3f5e..322901f339 100644
--- a/builtin.h
+++ b/builtin.h
@@ -5,6 +5,7 @@
 #include "strbuf.h"
 #include "cache.h"
 #include "commit.h"
+#include "notes.h"
 
 extern const char git_version_string[];
 extern const char git_usage_string[];
@@ -15,9 +16,28 @@ extern const char *help_unknown_cmd(const char *cmd);
 extern void prune_packed_objects(int);
 extern int fmt_merge_msg(int merge_summary, struct strbuf *in,
 	struct strbuf *out);
+extern int fmt_merge_msg_shortlog(struct strbuf *in, struct strbuf *out);
 extern int commit_tree(const char *msg, unsigned char *tree,
 		struct commit_list *parents, unsigned char *ret,
 		const char *author);
+extern int commit_notes(struct notes_tree *t, const char *msg);
+
+struct notes_rewrite_cfg {
+	struct notes_tree **trees;
+	const char *cmd;
+	int enabled;
+	combine_notes_fn *combine;
+	struct string_list *refs;
+	int refs_from_env;
+	int mode_from_env;
+};
+
+combine_notes_fn *parse_combine_notes_fn(const char *v);
+struct notes_rewrite_cfg *init_copy_notes_for_rewrite(const char *cmd);
+int copy_note_for_rewrite(struct notes_rewrite_cfg *c,
+			  const unsigned char *from_obj, const unsigned char *to_obj);
+void finish_copy_notes_for_rewrite(struct notes_rewrite_cfg *c);
+
 extern int check_pager_config(const char *cmd);
 
 extern int cmd_add(int argc, const char **argv, const char *prefix);
@@ -78,6 +98,7 @@ extern int cmd_mktag(int argc, const char **argv, const char *prefix);
 extern int cmd_mktree(int argc, const char **argv, const char *prefix);
 extern int cmd_mv(int argc, const char **argv, const char *prefix);
 extern int cmd_name_rev(int argc, const char **argv, const char *prefix);
+extern int cmd_notes(int argc, const char **argv, const char *prefix);
 extern int cmd_pack_objects(int argc, const char **argv, const char *prefix);
 extern int cmd_pack_redundant(int argc, const char **argv, const char *prefix);
 extern int cmd_patch_id(int argc, const char **argv, const char *prefix);
diff --git a/builtin-add.c b/builtin/add.c
index 87d2980313..87d2980313 100644
--- a/builtin-add.c
+++ b/builtin/add.c
diff --git a/builtin-annotate.c b/builtin/annotate.c
index fc43eed36b..fc43eed36b 100644
--- a/builtin-annotate.c
+++ b/builtin/annotate.c
diff --git a/builtin-apply.c b/builtin/apply.c
index 771c972c55..59bbcdb132 100644
--- a/builtin-apply.c
+++ b/builtin/apply.c
@@ -1864,13 +1864,13 @@ static int match_fragment(struct image *img,
 		if (match_end && (preimage->nr + try_lno != img->nr))
 			return 0;
 	} else if (ws_error_action == correct_ws_error &&
-		   (ws_rule & WS_BLANK_AT_EOF) && match_end) {
+		   (ws_rule & WS_BLANK_AT_EOF)) {
 		/*
-		 * This hunk that matches at the end extends beyond
-		 * the end of img, and we are removing blank lines
-		 * at the end of the file.  This many lines from the
-		 * beginning of the preimage must match with img, and
-		 * the remainder of the preimage must be blank.
+		 * This hunk extends beyond the end of img, and we are
+		 * removing blank lines at the end of the file.  This
+		 * many lines from the beginning of the preimage must
+		 * match with img, and the remainder of the preimage
+		 * must be blank.
 		 */
 		preimage_limit = img->nr - try_lno;
 	} else {
@@ -3141,11 +3141,7 @@ static void remove_file(struct patch *patch, int rmdir_empty)
 			die("unable to remove %s from index", patch->old_name);
 	}
 	if (!cached) {
-		if (S_ISGITLINK(patch->old_mode)) {
-			if (rmdir(patch->old_name))
-				warning("unable to remove submodule %s",
-					patch->old_name);
-		} else if (!unlink_or_warn(patch->old_name) && rmdir_empty) {
+		if (!remove_or_warn(patch->old_mode, patch->old_name) && rmdir_empty) {
 			remove_path(patch->old_name);
 		}
 	}
diff --git a/builtin-archive.c b/builtin/archive.c
index 6a887f5a9d..6a887f5a9d 100644
--- a/builtin-archive.c
+++ b/builtin/archive.c
diff --git a/builtin-bisect--helper.c b/builtin/bisect--helper.c
index 5b226399e1..5b226399e1 100644
--- a/builtin-bisect--helper.c
+++ b/builtin/bisect--helper.c
diff --git a/builtin-blame.c b/builtin/blame.c
index fc1586350f..8506286dd2 100644
--- a/builtin-blame.c
+++ b/builtin/blame.c
@@ -39,7 +39,7 @@ static int show_root;
 static int reverse;
 static int blank_boundary;
 static int incremental;
-static int xdl_opts = XDF_NEED_MINIMAL;
+static int xdl_opts;
 
 static enum date_mode blame_date_mode = DATE_ISO8601;
 static size_t blame_date_width;
@@ -1589,7 +1589,7 @@ static void emit_porcelain(struct scoreboard *sb, struct blame_entry *ent)
 	strcpy(hex, sha1_to_hex(suspect->commit->object.sha1));
 	printf("%s%c%d %d %d\n",
 	       hex,
-	       ent->guilty ? ' ' : '*', // purely for debugging
+	       ent->guilty ? ' ' : '*', /* purely for debugging */
 	       ent->s_lno + 1,
 	       ent->lno + 1,
 	       ent->num_lines);
diff --git a/builtin-branch.c b/builtin/branch.c
index a28a13986d..6cf7e721e6 100644
--- a/builtin-branch.c
+++ b/builtin/branch.c
@@ -610,7 +610,7 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
 			BRANCH_TRACK_EXPLICIT),
 		OPT_SET_INT( 0, "set-upstream",  &track, "change upstream info",
 			BRANCH_TRACK_OVERRIDE),
-		OPT_BOOLEAN( 0 , "color",  &branch_use_color, "use colored output"),
+		OPT__COLOR(&branch_use_color, "use colored output"),
 		OPT_SET_INT('r', NULL,     &kinds, "act on remote-tracking branches",
 			REF_REMOTE_BRANCH),
 		{
diff --git a/builtin-bundle.c b/builtin/bundle.c
index 2006cc5cd5..2006cc5cd5 100644
--- a/builtin-bundle.c
+++ b/builtin/bundle.c
diff --git a/builtin-cat-file.c b/builtin/cat-file.c
index a933eaa043..a933eaa043 100644
--- a/builtin-cat-file.c
+++ b/builtin/cat-file.c
diff --git a/builtin-check-attr.c b/builtin/check-attr.c
index 3016d29caa..3016d29caa 100644
--- a/builtin-check-attr.c
+++ b/builtin/check-attr.c
diff --git a/builtin-check-ref-format.c b/builtin/check-ref-format.c
index b106c65d80..b106c65d80 100644
--- a/builtin-check-ref-format.c
+++ b/builtin/check-ref-format.c
diff --git a/builtin-checkout-index.c b/builtin/checkout-index.c
index a7a5ee10f3..a7a5ee10f3 100644
--- a/builtin-checkout-index.c
+++ b/builtin/checkout-index.c
diff --git a/builtin-checkout.c b/builtin/checkout.c
index c5ab7835e1..88b1f43e05 100644
--- a/builtin-checkout.c
+++ b/builtin/checkout.c
@@ -128,24 +128,6 @@ static int checkout_stage(int stage, struct cache_entry *ce, int pos,
 		     (stage == 2) ? "our" : "their");
 }
 
-/* NEEDSWORK: share with merge-recursive */
-static void fill_mm(const unsigned char *sha1, mmfile_t *mm)
-{
-	unsigned long size;
-	enum object_type type;
-
-	if (!hashcmp(sha1, null_sha1)) {
-		mm->ptr = xstrdup("");
-		mm->size = 0;
-		return;
-	}
-
-	mm->ptr = read_sha1_file(sha1, &type, &size);
-	if (!mm->ptr || type != OBJ_BLOB)
-		die("unable to read blob object %s", sha1_to_hex(sha1));
-	mm->size = size;
-}
-
 static int checkout_merged(int pos, struct checkout *state)
 {
 	struct cache_entry *ce = active_cache[pos];
@@ -163,11 +145,11 @@ static int checkout_merged(int pos, struct checkout *state)
 	    ce_stage(active_cache[pos+2]) != 3)
 		return error("path '%s' does not have all 3 versions", path);
 
-	fill_mm(active_cache[pos]->sha1, &ancestor);
-	fill_mm(active_cache[pos+1]->sha1, &ours);
-	fill_mm(active_cache[pos+2]->sha1, &theirs);
+	read_mmblob(&ancestor, active_cache[pos]->sha1);
+	read_mmblob(&ours, active_cache[pos+1]->sha1);
+	read_mmblob(&theirs, active_cache[pos+2]->sha1);
 
-	status = ll_merge(&result_buf, path, &ancestor,
+	status = ll_merge(&result_buf, path, &ancestor, "base",
 			  &ours, "ours", &theirs, "theirs", 0);
 	free(ancestor.ptr);
 	free(ours.ptr);
@@ -457,6 +439,7 @@ static int merge_working_tree(struct checkout_opts *opts,
 			ret = reset_tree(new->commit->tree, opts, 1);
 			if (ret)
 				return ret;
+			o.ancestor = old->name;
 			o.branch1 = new->name;
 			o.branch2 = "local";
 			merge_trees(&o, new->commit->tree, work,
diff --git a/builtin-clean.c b/builtin/clean.c
index fac64e6cd3..fac64e6cd3 100644
--- a/builtin-clean.c
+++ b/builtin/clean.c
diff --git a/builtin-clone.c b/builtin/clone.c
index 58bacbd552..3a3625b2ad 100644
--- a/builtin-clone.c
+++ b/builtin/clone.c
@@ -37,18 +37,17 @@ static const char * const builtin_clone_usage[] = {
 	NULL
 };
 
-static int option_quiet, option_no_checkout, option_bare, option_mirror;
+static int option_no_checkout, option_bare, option_mirror;
 static int option_local, option_no_hardlinks, option_shared, option_recursive;
 static char *option_template, *option_reference, *option_depth;
 static char *option_origin = NULL;
 static char *option_branch = NULL;
 static char *option_upload_pack = "git-upload-pack";
-static int option_verbose;
+static int option_verbosity;
 static int option_progress;
 
 static struct option builtin_clone_options[] = {
-	OPT__QUIET(&option_quiet),
-	OPT__VERBOSE(&option_verbose),
+	OPT__VERBOSITY(&option_verbosity),
 	OPT_BOOLEAN(0, "progress", &option_progress,
 			"force progress reporting"),
 	OPT_BOOLEAN('n', "no-checkout", &option_no_checkout,
@@ -303,6 +302,8 @@ static const struct ref *clone_local(const char *src_repo,
 	transport = transport_get(remote, src_repo);
 	ret = transport_get_remote_refs(transport);
 	transport_disconnect(transport);
+	if (0 <= option_verbosity)
+		printf("done.\n");
 	return ret;
 }
 
@@ -462,7 +463,10 @@ int cmd_clone(int argc, const char **argv, const char *prefix)
 		die("could not create leading directories of '%s'", git_dir);
 	set_git_dir(make_absolute_path(git_dir));
 
-	init_db(option_template, option_quiet ? INIT_DB_QUIET : 0);
+	if (0 <= option_verbosity)
+		printf("Cloning into %s%s...\n",
+		       option_bare ? "bare repository " : "", dir);
+	init_db(option_template, INIT_DB_QUIET);
 
 	/*
 	 * At this point, the config exists, so we do not need the
@@ -526,13 +530,7 @@ int cmd_clone(int argc, const char **argv, const char *prefix)
 			transport_set_option(transport, TRANS_OPT_DEPTH,
 					     option_depth);
 
-		if (option_quiet)
-			transport->verbose = -1;
-		else if (option_verbose)
-			transport->verbose = 1;
-
-		if (option_progress)
-			transport->progress = 1;
+		transport_set_verbosity(transport, option_verbosity, option_progress);
 
 		if (option_upload_pack)
 			transport_set_option(transport, TRANS_OPT_UPLOADPACK,
@@ -641,7 +639,7 @@ int cmd_clone(int argc, const char **argv, const char *prefix)
 		opts.update = 1;
 		opts.merge = 1;
 		opts.fn = oneway_merge;
-		opts.verbose_update = !option_quiet;
+		opts.verbose_update = (option_verbosity > 0);
 		opts.src_index = &the_index;
 		opts.dst_index = &the_index;
 
diff --git a/builtin-commit-tree.c b/builtin/commit-tree.c
index 90dac349a3..90dac349a3 100644
--- a/builtin-commit-tree.c
+++ b/builtin/commit-tree.c
diff --git a/builtin-commit.c b/builtin/commit.c
index 7b7a51a168..b71d8f62d1 100644
--- a/builtin-commit.c
+++ b/builtin/commit.c
@@ -66,6 +66,7 @@ static char *edit_message, *use_message;
 static char *author_name, *author_email, *author_date;
 static int all, edit_flag, also, interactive, only, amend, signoff;
 static int quiet, verbose, no_verify, allow_empty, dry_run, renew_authorship;
+static int no_post_rewrite;
 static char *untracked_files_arg, *force_date;
 /*
  * The default commit message cleanup mode will remove the lines
@@ -137,6 +138,7 @@ static struct option builtin_commit_options[] = {
 	OPT_BOOLEAN('z', "null", &null_termination,
 		    "terminate entries with NUL"),
 	OPT_BOOLEAN(0, "amend", &amend, "amend previous commit"),
+	OPT_BOOLEAN(0, "no-post-rewrite", &no_post_rewrite, "bypass post-rewrite hook"),
 	{ OPTION_STRING, 'u', "untracked-files", &untracked_files_arg, "mode", "show untracked files, optional modes: all, normal, no. (Default: all)", PARSE_OPT_OPTARG, NULL, (intptr_t)"all" },
 	OPT_BOOLEAN(0, "allow-empty", &allow_empty, "ok to record an empty change"),
 	/* end commit contents options */
@@ -305,7 +307,7 @@ static char *prepare_index(int argc, const char **argv, const char *prefix, int
 	 * (B) on failure, rollback the real index.
 	 */
 	if (all || (also && pathspec && *pathspec)) {
-		int fd = hold_locked_index(&index_lock, 1);
+		fd = hold_locked_index(&index_lock, 1);
 		add_files_to_cache(also ? prefix : NULL, pathspec, 0);
 		refresh_cache_or_die(refresh_flags);
 		if (write_cache(fd, active_cache, active_nr) ||
@@ -320,8 +322,8 @@ static char *prepare_index(int argc, const char **argv, const char *prefix, int
 	 *
 	 * (1) return the name of the real index file.
 	 *
-	 * The caller should run hooks on the real index, and run
-	 * hooks on the real index, and create commit from the_index.
+	 * The caller should run hooks on the real index,
+	 * and create commit from the_index.
 	 * We still need to refresh the index here.
 	 */
 	if (!pathspec || !*pathspec) {
@@ -453,15 +455,21 @@ static void determine_author_info(void)
 		if (!a)
 			die("invalid commit: %s", use_message);
 
-		lb = strstr(a + 8, " <");
-		rb = strstr(a + 8, "> ");
-		eol = strchr(a + 8, '\n');
-		if (!lb || !rb || !eol)
+		lb = strchrnul(a + strlen("\nauthor "), '<');
+		rb = strchrnul(lb, '>');
+		eol = strchrnul(rb, '\n');
+		if (!*lb || !*rb || !*eol)
 			die("invalid commit: %s", use_message);
 
-		name = xstrndup(a + 8, lb - (a + 8));
-		email = xstrndup(lb + 2, rb - (lb + 2));
-		date = xstrndup(rb + 2, eol - (rb + 2));
+		if (lb == a + strlen("\nauthor "))
+			/* \nauthor <foo@example.com> */
+			name = xcalloc(1, 1);
+		else
+			name = xmemdupz(a + strlen("\nauthor "),
+					(lb - strlen(" ") -
+					 (a + strlen("\nauthor "))));
+		email = xmemdupz(lb + strlen("<"), rb - (lb + strlen("<")));
+		date = xmemdupz(rb + strlen("> "), eol - (rb + strlen("> ")));
 	}
 
 	if (force_author) {
@@ -1015,6 +1023,7 @@ static int git_status_config(const char *k, const char *v, void *cb)
 int cmd_status(int argc, const char **argv, const char *prefix)
 {
 	struct wt_status s;
+	int fd;
 	unsigned char sha1[20];
 	static struct option builtin_status_options[] = {
 		OPT__VERBOSE(&verbose),
@@ -1048,6 +1057,14 @@ int cmd_status(int argc, const char **argv, const char *prefix)
 
 	read_cache_preload(s.pathspec);
 	refresh_index(&the_index, REFRESH_QUIET|REFRESH_UNMERGED, s.pathspec, NULL, NULL);
+
+	fd = hold_locked_index(&index_lock, 0);
+	if (0 <= fd) {
+		if (!write_cache(fd, active_cache, active_nr))
+			commit_locked_index(&index_lock);
+		rollback_lock_file(&index_lock);
+	}
+
 	s.is_initial = get_sha1(s.reference, sha1) ? 1 : 0;
 	s.in_merge = in_merge;
 	wt_status_collect(&s);
@@ -1158,6 +1175,40 @@ static int git_commit_config(const char *k, const char *v, void *cb)
 	return git_status_config(k, v, s);
 }
 
+static const char post_rewrite_hook[] = "hooks/post-rewrite";
+
+static int run_rewrite_hook(const unsigned char *oldsha1,
+			    const unsigned char *newsha1)
+{
+	/* oldsha1 SP newsha1 LF NUL */
+	static char buf[2*40 + 3];
+	struct child_process proc;
+	const char *argv[3];
+	int code;
+	size_t n;
+
+	if (access(git_path(post_rewrite_hook), X_OK) < 0)
+		return 0;
+
+	argv[0] = git_path(post_rewrite_hook);
+	argv[1] = "amend";
+	argv[2] = NULL;
+
+	memset(&proc, 0, sizeof(proc));
+	proc.argv = argv;
+	proc.in = -1;
+	proc.stdout_to_stderr = 1;
+
+	code = start_command(&proc);
+	if (code)
+		return code;
+	n = snprintf(buf, sizeof(buf), "%s %s\n",
+		     sha1_to_hex(oldsha1), sha1_to_hex(newsha1));
+	write_in_full(proc.in, buf, n);
+	close(proc.in);
+	return finish_command(&proc);
+}
+
 int cmd_commit(int argc, const char **argv, const char *prefix)
 {
 	struct strbuf sb = STRBUF_INIT;
@@ -1301,6 +1352,15 @@ int cmd_commit(int argc, const char **argv, const char *prefix)
 
 	rerere(0);
 	run_hook(get_index_file(), "post-commit", NULL);
+	if (amend && !no_post_rewrite) {
+		struct notes_rewrite_cfg *cfg;
+		cfg = init_copy_notes_for_rewrite("amend");
+		if (cfg) {
+			copy_note_for_rewrite(cfg, head_sha1, commit_sha1);
+			finish_copy_notes_for_rewrite(cfg);
+		}
+		run_rewrite_hook(head_sha1, commit_sha1);
+	}
 	if (!quiet)
 		print_summary(prefix, commit_sha1);
 
diff --git a/builtin-config.c b/builtin/config.c
index 4bc46b15fd..4bc46b15fd 100644
--- a/builtin-config.c
+++ b/builtin/config.c
diff --git a/builtin-count-objects.c b/builtin/count-objects.c
index 2bdd8ebde1..2bdd8ebde1 100644
--- a/builtin-count-objects.c
+++ b/builtin/count-objects.c
diff --git a/builtin-describe.c b/builtin/describe.c
index 71be2a9364..43caff2ffe 100644
--- a/builtin-describe.c
+++ b/builtin/describe.c
@@ -35,7 +35,8 @@ static const char *diff_index_args[] = {
 
 struct commit_name {
 	struct tag *tag;
-	int prio; /* annotated tag = 2, tag = 1, head = 0 */
+	unsigned prio:2; /* annotated tag = 2, tag = 1, head = 0 */
+	unsigned name_checked:1;
 	unsigned char sha1[20];
 	char path[FLEX_ARRAY]; /* more */
 };
@@ -43,18 +44,53 @@ static const char *prio_names[] = {
 	"head", "lightweight", "annotated",
 };
 
+static int replace_name(struct commit_name *e,
+			       int prio,
+			       const unsigned char *sha1,
+			       struct tag **tag)
+{
+	if (!e || e->prio < prio)
+		return 1;
+
+	if (e->prio == 2 && prio == 2) {
+		/* Multiple annotated tags point to the same commit.
+		 * Select one to keep based upon their tagger date.
+		 */
+		struct tag *t;
+
+		if (!e->tag) {
+			t = lookup_tag(e->sha1);
+			if (!t || parse_tag(t))
+				return 1;
+			e->tag = t;
+		}
+
+		t = lookup_tag(sha1);
+		if (!t || parse_tag(t))
+			return 0;
+		*tag = t;
+
+		if (e->tag->date < t->date)
+			return 1;
+	}
+
+	return 0;
+}
+
 static void add_to_known_names(const char *path,
 			       struct commit *commit,
 			       int prio,
 			       const unsigned char *sha1)
 {
 	struct commit_name *e = commit->util;
-	if (!e || e->prio < prio) {
+	struct tag *tag = NULL;
+	if (replace_name(e, prio, sha1, &tag)) {
 		size_t len = strlen(path)+1;
 		free(e);
 		e = xmalloc(sizeof(struct commit_name) + len);
-		e->tag = NULL;
+		e->tag = tag;
 		e->prio = prio;
+		e->name_checked = 0;
 		hashcpy(e->sha1, sha1);
 		memcpy(e->path, path, len);
 		commit->util = e;
@@ -165,10 +201,15 @@ static void display_name(struct commit_name *n)
 {
 	if (n->prio == 2 && !n->tag) {
 		n->tag = lookup_tag(n->sha1);
-		if (!n->tag || parse_tag(n->tag) || !n->tag->tag)
+		if (!n->tag || parse_tag(n->tag))
 			die("annotated tag %s not available", n->path);
+	}
+	if (n->tag && !n->name_checked) {
+		if (!n->tag->tag)
+			die("annotated tag %s has no embedded name", n->path);
 		if (strcmp(n->tag->tag, all ? n->path + 5 : n->path))
 			warning("tag '%s' is really '%s' here", n->tag->tag, n->path);
+		n->name_checked = 1;
 	}
 
 	if (n->tag)
diff --git a/builtin-diff-files.c b/builtin/diff-files.c
index 5b64011de8..5b64011de8 100644
--- a/builtin-diff-files.c
+++ b/builtin/diff-files.c
diff --git a/builtin-diff-index.c b/builtin/diff-index.c
index 04837494fe..04837494fe 100644
--- a/builtin-diff-index.c
+++ b/builtin/diff-index.c
diff --git a/builtin-diff-tree.c b/builtin/diff-tree.c
index 2380c21951..3c78bda566 100644
--- a/builtin-diff-tree.c
+++ b/builtin/diff-tree.c
@@ -92,12 +92,23 @@ static const char diff_tree_usage[] =
 "  --root        include the initial commit as diff against /dev/null\n"
 COMMON_DIFF_OPTIONS_HELP;
 
+static void diff_tree_tweak_rev(struct rev_info *rev, struct setup_revision_opt *opt)
+{
+	if (!rev->diffopt.output_format) {
+		if (rev->dense_combined_merges)
+			rev->diffopt.output_format = DIFF_FORMAT_PATCH;
+		else
+			rev->diffopt.output_format = DIFF_FORMAT_RAW;
+	}
+}
+
 int cmd_diff_tree(int argc, const char **argv, const char *prefix)
 {
 	int nr_sha1;
 	char line[1000];
 	struct object *tree1, *tree2;
 	static struct rev_info *opt = &log_tree_opt;
+	struct setup_revision_opt s_r_opt;
 	int read_stdin = 0;
 
 	init_revisions(opt, prefix);
@@ -105,7 +116,9 @@ int cmd_diff_tree(int argc, const char **argv, const char *prefix)
 	opt->abbrev = 0;
 	opt->diff = 1;
 	opt->disable_stdin = 1;
-	argc = setup_revisions(argc, argv, opt, NULL);
+	memset(&s_r_opt, 0, sizeof(s_r_opt));
+	s_r_opt.tweak = diff_tree_tweak_rev;
+	argc = setup_revisions(argc, argv, opt, &s_r_opt);
 
 	while (--argc > 0) {
 		const char *arg = *++argv;
@@ -117,9 +130,6 @@ int cmd_diff_tree(int argc, const char **argv, const char *prefix)
 		usage(diff_tree_usage);
 	}
 
-	if (!opt->diffopt.output_format)
-		opt->diffopt.output_format = DIFF_FORMAT_RAW;
-
 	/*
 	 * NOTE! We expect "a ^b" to be equal to "a..b", so we
 	 * reverse the order of the objects if the second one
diff --git a/builtin-diff.c b/builtin/diff.c
index ffcdd055ca..ffcdd055ca 100644
--- a/builtin-diff.c
+++ b/builtin/diff.c
diff --git a/builtin-fast-export.c b/builtin/fast-export.c
index c6dd71a7bc..c6dd71a7bc 100644
--- a/builtin-fast-export.c
+++ b/builtin/fast-export.c
diff --git a/builtin-fetch-pack.c b/builtin/fetch-pack.c
index dbd8b7bcc8..dbd8b7bcc8 100644
--- a/builtin-fetch-pack.c
+++ b/builtin/fetch-pack.c
diff --git a/builtin-fetch.c b/builtin/fetch.c
index 007dabf62f..8470850415 100644
--- a/builtin-fetch.c
+++ b/builtin/fetch.c
@@ -11,6 +11,7 @@
 #include "run-command.h"
 #include "parse-options.h"
 #include "sigchain.h"
+#include "transport.h"
 
 static const char * const builtin_fetch_usage[] = {
 	"git fetch [<options>] [<repository> [<refspec>...]]",
@@ -27,6 +28,7 @@ enum {
 };
 
 static int all, append, dry_run, force, keep, multiple, prune, update_head_ok, verbosity;
+static int progress;
 static int tags = TAGS_DEFAULT;
 static const char *depth;
 static const char *upload_pack;
@@ -56,6 +58,7 @@ static struct option builtin_fetch_options[] = {
 	OPT_BOOLEAN('k', "keep", &keep, "keep downloaded pack"),
 	OPT_BOOLEAN('u', "update-head-ok", &update_head_ok,
 		    "allow updating of HEAD ref"),
+	OPT_BOOLEAN(0, "progress", &progress, "force progress reporting"),
 	OPT_STRING(0, "depth", &depth, "DEPTH",
 		   "deepen history of shallow clone"),
 	OPT_END()
@@ -203,7 +206,6 @@ static int s_update_ref(const char *action,
 	return 0;
 }
 
-#define SUMMARY_WIDTH (2 * DEFAULT_ABBREV + 3)
 #define REFCOL_WIDTH  10
 
 static int update_local_ref(struct ref *ref,
@@ -222,7 +224,7 @@ static int update_local_ref(struct ref *ref,
 
 	if (!hashcmp(ref->old_sha1, ref->new_sha1)) {
 		if (verbosity > 0)
-			sprintf(display, "= %-*s %-*s -> %s", SUMMARY_WIDTH,
+			sprintf(display, "= %-*s %-*s -> %s", TRANSPORT_SUMMARY_WIDTH,
 				"[up to date]", REFCOL_WIDTH, remote,
 				pretty_ref);
 		return 0;
@@ -237,7 +239,7 @@ static int update_local_ref(struct ref *ref,
 		 * the head, and the old value of the head isn't empty...
 		 */
 		sprintf(display, "! %-*s %-*s -> %s  (can't fetch in current branch)",
-			SUMMARY_WIDTH, "[rejected]", REFCOL_WIDTH, remote,
+			TRANSPORT_SUMMARY_WIDTH, "[rejected]", REFCOL_WIDTH, remote,
 			pretty_ref);
 		return 1;
 	}
@@ -247,7 +249,7 @@ static int update_local_ref(struct ref *ref,
 		int r;
 		r = s_update_ref("updating tag", ref, 0);
 		sprintf(display, "%c %-*s %-*s -> %s%s", r ? '!' : '-',
-			SUMMARY_WIDTH, "[tag update]", REFCOL_WIDTH, remote,
+			TRANSPORT_SUMMARY_WIDTH, "[tag update]", REFCOL_WIDTH, remote,
 			pretty_ref, r ? "  (unable to update local ref)" : "");
 		return r;
 	}
@@ -269,7 +271,7 @@ static int update_local_ref(struct ref *ref,
 
 		r = s_update_ref(msg, ref, 0);
 		sprintf(display, "%c %-*s %-*s -> %s%s", r ? '!' : '*',
-			SUMMARY_WIDTH, what, REFCOL_WIDTH, remote, pretty_ref,
+			TRANSPORT_SUMMARY_WIDTH, what, REFCOL_WIDTH, remote, pretty_ref,
 			r ? "  (unable to update local ref)" : "");
 		return r;
 	}
@@ -282,7 +284,7 @@ static int update_local_ref(struct ref *ref,
 		strcat(quickref, find_unique_abbrev(ref->new_sha1, DEFAULT_ABBREV));
 		r = s_update_ref("fast-forward", ref, 1);
 		sprintf(display, "%c %-*s %-*s -> %s%s", r ? '!' : ' ',
-			SUMMARY_WIDTH, quickref, REFCOL_WIDTH, remote,
+			TRANSPORT_SUMMARY_WIDTH, quickref, REFCOL_WIDTH, remote,
 			pretty_ref, r ? "  (unable to update local ref)" : "");
 		return r;
 	} else if (force || ref->force) {
@@ -293,13 +295,13 @@ static int update_local_ref(struct ref *ref,
 		strcat(quickref, find_unique_abbrev(ref->new_sha1, DEFAULT_ABBREV));
 		r = s_update_ref("forced-update", ref, 1);
 		sprintf(display, "%c %-*s %-*s -> %s  (%s)", r ? '!' : '+',
-			SUMMARY_WIDTH, quickref, REFCOL_WIDTH, remote,
+			TRANSPORT_SUMMARY_WIDTH, quickref, REFCOL_WIDTH, remote,
 			pretty_ref,
 			r ? "unable to update local ref" : "forced update");
 		return r;
 	} else {
 		sprintf(display, "! %-*s %-*s -> %s  (non-fast-forward)",
-			SUMMARY_WIDTH, "[rejected]", REFCOL_WIDTH, remote,
+			TRANSPORT_SUMMARY_WIDTH, "[rejected]", REFCOL_WIDTH, remote,
 			pretty_ref);
 		return 1;
 	}
@@ -392,7 +394,7 @@ static int store_updated_refs(const char *raw_url, const char *remote_name,
 			free(ref);
 		} else
 			sprintf(note, "* %-*s %-*s -> FETCH_HEAD",
-				SUMMARY_WIDTH, *kind ? kind : "branch",
+				TRANSPORT_SUMMARY_WIDTH, *kind ? kind : "branch",
 				 REFCOL_WIDTH, *what ? what : "HEAD");
 		if (*note) {
 			if (verbosity >= 0 && !shown_url) {
@@ -513,7 +515,7 @@ static int prune_refs(struct transport *transport, struct ref *ref_map)
 			result |= delete_ref(ref->name, NULL, 0);
 		if (verbosity >= 0) {
 			fprintf(stderr, " x %-*s %-*s -> %s\n",
-				SUMMARY_WIDTH, "[deleted]",
+				TRANSPORT_SUMMARY_WIDTH, "[deleted]",
 				REFCOL_WIDTH, "(none)", prettify_refname(ref->name));
 			warn_dangling_symref(stderr, dangling_msg, ref->name);
 		}
@@ -844,10 +846,7 @@ static int fetch_one(struct remote *remote, int argc, const char **argv)
 		die("Where do you want to fetch from today?");
 
 	transport = transport_get(remote, NULL);
-	if (verbosity >= 2)
-		transport->verbose = verbosity <= 3 ? verbosity : 3;
-	if (verbosity < 0)
-		transport->verbose = -1;
+	transport_set_verbosity(transport, verbosity, progress);
 	if (upload_pack)
 		set_option(TRANS_OPT_UPLOADPACK, upload_pack);
 	if (keep)
diff --git a/builtin-fmt-merge-msg.c b/builtin/fmt-merge-msg.c
index 9d524000b5..44204257c7 100644
--- a/builtin-fmt-merge-msg.c
+++ b/builtin/fmt-merge-msg.c
@@ -4,6 +4,7 @@
 #include "diff.h"
 #include "revision.h"
 #include "tag.h"
+#include "string-list.h"
 
 static const char * const fmt_merge_msg_usage[] = {
 	"git fmt-merge-msg [--log|--no-log] [--file <file>]",
@@ -24,58 +25,21 @@ static int fmt_merge_msg_config(const char *key, const char *value, void *cb)
 	return 0;
 }
 
-struct list {
-	char **list;
-	void **payload;
-	unsigned nr, alloc;
+struct src_data {
+	struct string_list branch, tag, r_branch, generic;
+	int head_status;
 };
 
-static void append_to_list(struct list *list, char *value, void *payload)
-{
-	if (list->nr == list->alloc) {
-		list->alloc += 32;
-		list->list = xrealloc(list->list, sizeof(char *) * list->alloc);
-		list->payload = xrealloc(list->payload,
-				sizeof(char *) * list->alloc);
-	}
-	list->payload[list->nr] = payload;
-	list->list[list->nr++] = value;
-}
-
-static int find_in_list(struct list *list, char *value)
-{
-	int i;
-
-	for (i = 0; i < list->nr; i++)
-		if (!strcmp(list->list[i], value))
-			return i;
-
-	return -1;
-}
-
-static void free_list(struct list *list)
+void init_src_data(struct src_data *data)
 {
-	int i;
-
-	if (list->alloc == 0)
-		return;
-
-	for (i = 0; i < list->nr; i++) {
-		free(list->list[i]);
-		free(list->payload[i]);
-	}
-	free(list->list);
-	free(list->payload);
-	list->nr = list->alloc = 0;
+	data->branch.strdup_strings = 1;
+	data->tag.strdup_strings = 1;
+	data->r_branch.strdup_strings = 1;
+	data->generic.strdup_strings = 1;
 }
 
-struct src_data {
-	struct list branch, tag, r_branch, generic;
-	int head_status;
-};
-
-static struct list srcs = { NULL, NULL, 0, 0};
-static struct list origins = { NULL, NULL, 0, 0};
+static struct string_list srcs = { NULL, 0, 0, 1 };
+static struct string_list origins = { NULL, 0, 0, 1 };
 
 static int handle_line(char *line)
 {
@@ -83,6 +47,7 @@ static int handle_line(char *line)
 	unsigned char *sha1;
 	char *src, *origin;
 	struct src_data *src_data;
+	struct string_list_item *item;
 	int pulling_head = 0;
 
 	if (len < 43 || line[40] != '\t')
@@ -115,64 +80,62 @@ static int handle_line(char *line)
 		pulling_head = 1;
 	}
 
-	i = find_in_list(&srcs, src);
-	if (i < 0) {
-		i = srcs.nr;
-		append_to_list(&srcs, xstrdup(src),
-				xcalloc(1, sizeof(struct src_data)));
+	item = unsorted_string_list_lookup(&srcs, src);
+	if (!item) {
+		item = string_list_append(src, &srcs);
+		item->util = xcalloc(1, sizeof(struct src_data));
+		init_src_data(item->util);
 	}
-	src_data = srcs.payload[i];
+	src_data = item->util;
 
 	if (pulling_head) {
-		origin = xstrdup(src);
+		origin = src;
 		src_data->head_status |= 1;
 	} else if (!prefixcmp(line, "branch ")) {
-		origin = xstrdup(line + 7);
-		append_to_list(&src_data->branch, origin, NULL);
+		origin = line + 7;
+		string_list_append(origin, &src_data->branch);
 		src_data->head_status |= 2;
 	} else if (!prefixcmp(line, "tag ")) {
 		origin = line;
-		append_to_list(&src_data->tag, xstrdup(origin + 4), NULL);
+		string_list_append(origin + 4, &src_data->tag);
 		src_data->head_status |= 2;
 	} else if (!prefixcmp(line, "remote branch ")) {
-		origin = xstrdup(line + 14);
-		append_to_list(&src_data->r_branch, origin, NULL);
+		origin = line + 14;
+		string_list_append(origin, &src_data->r_branch);
 		src_data->head_status |= 2;
 	} else {
-		origin = xstrdup(src);
-		append_to_list(&src_data->generic, xstrdup(line), NULL);
+		origin = src;
+		string_list_append(line, &src_data->generic);
 		src_data->head_status |= 2;
 	}
 
 	if (!strcmp(".", src) || !strcmp(src, origin)) {
 		int len = strlen(origin);
-		if (origin[0] == '\'' && origin[len - 1] == '\'') {
+		if (origin[0] == '\'' && origin[len - 1] == '\'')
 			origin = xmemdupz(origin + 1, len - 2);
-		} else {
-			origin = xstrdup(origin);
-		}
 	} else {
 		char *new_origin = xmalloc(strlen(origin) + strlen(src) + 5);
 		sprintf(new_origin, "%s of %s", origin, src);
 		origin = new_origin;
 	}
-	append_to_list(&origins, origin, sha1);
+	string_list_append(origin, &origins)->util = sha1;
 	return 0;
 }
 
 static void print_joined(const char *singular, const char *plural,
-		struct list *list, struct strbuf *out)
+		struct string_list *list, struct strbuf *out)
 {
 	if (list->nr == 0)
 		return;
 	if (list->nr == 1) {
-		strbuf_addf(out, "%s%s", singular, list->list[0]);
+		strbuf_addf(out, "%s%s", singular, list->items[0].string);
 	} else {
 		int i;
 		strbuf_addstr(out, plural);
 		for (i = 0; i < list->nr - 1; i++)
-			strbuf_addf(out, "%s%s", i > 0 ? ", " : "", list->list[i]);
-		strbuf_addf(out, " and %s", list->list[list->nr - 1]);
+			strbuf_addf(out, "%s%s", i > 0 ? ", " : "",
+				    list->items[i].string);
+		strbuf_addf(out, " and %s", list->items[list->nr - 1].string);
 	}
 }
 
@@ -183,8 +146,9 @@ static void shortlog(const char *name, unsigned char *sha1,
 	int i, count = 0;
 	struct commit *commit;
 	struct object *branch;
-	struct list subjects = { NULL, NULL, 0, 0 };
+	struct string_list subjects = { NULL, 0, 0, 1 };
 	int flags = UNINTERESTING | TREESAME | SEEN | SHOWN | ADDED;
+	struct strbuf sb = STRBUF_INIT;
 
 	branch = deref_tag(parse_object(sha1), sha1_to_hex(sha1), 40);
 	if (!branch || branch->type != OBJ_COMMIT)
@@ -198,7 +162,7 @@ static void shortlog(const char *name, unsigned char *sha1,
 	if (prepare_revision_walk(rev))
 		die("revision walk setup failed");
 	while ((commit = get_revision(rev)) != NULL) {
-		char *oneline, *bol, *eol;
+		struct pretty_print_context ctx = {0};
 
 		/* ignore merges */
 		if (commit->parents && commit->parents->next)
@@ -208,30 +172,14 @@ static void shortlog(const char *name, unsigned char *sha1,
 		if (subjects.nr > limit)
 			continue;
 
-		bol = strstr(commit->buffer, "\n\n");
-		if (bol) {
-			unsigned char c;
-			do {
-				c = *++bol;
-			} while (isspace(c));
-			if (!c)
-				bol = NULL;
-		}
+		format_commit_message(commit, "%s", &sb, &ctx);
+		strbuf_ltrim(&sb);
 
-		if (!bol) {
-			append_to_list(&subjects, xstrdup(sha1_to_hex(
-							commit->object.sha1)),
-					NULL);
-			continue;
-		}
-
-		eol = strchr(bol, '\n');
-		if (eol) {
-			oneline = xmemdupz(bol, eol - bol);
-		} else {
-			oneline = xstrdup(bol);
-		}
-		append_to_list(&subjects, oneline, NULL);
+		if (!sb.len)
+			string_list_append(sha1_to_hex(commit->object.sha1),
+					   &subjects);
+		else
+			string_list_append(strbuf_detach(&sb, NULL), &subjects);
 	}
 
 	if (count > limit)
@@ -243,7 +191,7 @@ static void shortlog(const char *name, unsigned char *sha1,
 		if (i >= limit)
 			strbuf_addf(out, "  ...\n");
 		else
-			strbuf_addf(out, "  %s\n", subjects.list[i]);
+			strbuf_addf(out, "  %s\n", subjects.items[i].string);
 
 	clear_commit_marks((struct commit *)branch, flags);
 	clear_commit_marks(head, flags);
@@ -251,46 +199,24 @@ static void shortlog(const char *name, unsigned char *sha1,
 	rev->commits = NULL;
 	rev->pending.nr = 0;
 
-	free_list(&subjects);
+	string_list_clear(&subjects, 0);
 }
 
-int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) {
-	int limit = 20, i = 0, pos = 0;
+static void do_fmt_merge_msg_title(struct strbuf *out,
+	const char *current_branch) {
+	int i = 0;
 	char *sep = "";
-	unsigned char head_sha1[20];
-	const char *current_branch;
-
-	/* get current branch */
-	current_branch = resolve_ref("HEAD", head_sha1, 1, NULL);
-	if (!current_branch)
-		die("No current branch");
-	if (!prefixcmp(current_branch, "refs/heads/"))
-		current_branch += 11;
-
-	/* get a line */
-	while (pos < in->len) {
-		int len;
-		char *newline, *p = in->buf + pos;
-
-		newline = strchr(p, '\n');
-		len = newline ? newline - p : strlen(p);
-		pos += len + !!newline;
-		i++;
-		p[len] = 0;
-		if (handle_line(p))
-			die ("Error in line %d: %.*s", i, len, p);
-	}
 
 	strbuf_addstr(out, "Merge ");
 	for (i = 0; i < srcs.nr; i++) {
-		struct src_data *src_data = srcs.payload[i];
+		struct src_data *src_data = srcs.items[i].util;
 		const char *subsep = "";
 
 		strbuf_addstr(out, sep);
 		sep = "; ";
 
 		if (src_data->head_status == 1) {
-			strbuf_addstr(out, srcs.list[i]);
+			strbuf_addstr(out, srcs.items[i].string);
 			continue;
 		}
 		if (src_data->head_status == 3) {
@@ -319,14 +245,48 @@ int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) {
 			print_joined("commit ", "commits ", &src_data->generic,
 					out);
 		}
-		if (strcmp(".", srcs.list[i]))
-			strbuf_addf(out, " of %s", srcs.list[i]);
+		if (strcmp(".", srcs.items[i].string))
+			strbuf_addf(out, " of %s", srcs.items[i].string);
 	}
 
 	if (!strcmp("master", current_branch))
 		strbuf_addch(out, '\n');
 	else
 		strbuf_addf(out, " into %s\n", current_branch);
+}
+
+static int do_fmt_merge_msg(int merge_title, int merge_summary,
+	struct strbuf *in, struct strbuf *out) {
+	int limit = 20, i = 0, pos = 0;
+	unsigned char head_sha1[20];
+	const char *current_branch;
+
+	/* get current branch */
+	current_branch = resolve_ref("HEAD", head_sha1, 1, NULL);
+	if (!current_branch)
+		die("No current branch");
+	if (!prefixcmp(current_branch, "refs/heads/"))
+		current_branch += 11;
+
+	/* get a line */
+	while (pos < in->len) {
+		int len;
+		char *newline, *p = in->buf + pos;
+
+		newline = strchr(p, '\n');
+		len = newline ? newline - p : strlen(p);
+		pos += len + !!newline;
+		i++;
+		p[len] = 0;
+		if (handle_line(p))
+			die ("Error in line %d: %.*s", i, len, p);
+	}
+
+	if (!srcs.nr)
+		return 0;
+
+	if (merge_title)
+		do_fmt_merge_msg_title(out, current_branch);
 
 	if (merge_summary) {
 		struct commit *head;
@@ -338,19 +298,32 @@ int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) {
 		rev.ignore_merges = 1;
 		rev.limited = 1;
 
+		if (suffixcmp(out->buf, "\n"))
+			strbuf_addch(out, '\n');
+
 		for (i = 0; i < origins.nr; i++)
-			shortlog(origins.list[i], origins.payload[i],
+			shortlog(origins.items[i].string, origins.items[i].util,
 					head, &rev, limit, out);
 	}
 	return 0;
 }
 
+int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) {
+	return do_fmt_merge_msg(1, merge_summary, in, out);
+}
+
+int fmt_merge_msg_shortlog(struct strbuf *in, struct strbuf *out) {
+	return do_fmt_merge_msg(0, 1, in, out);
+}
+
 int cmd_fmt_merge_msg(int argc, const char **argv, const char *prefix)
 {
 	const char *inpath = NULL;
 	struct option options[] = {
 		OPT_BOOLEAN(0, "log",     &merge_summary, "populate log with the shortlog"),
-		OPT_BOOLEAN(0, "summary", &merge_summary, "alias for --log"),
+		{ OPTION_BOOLEAN, 0, "summary", &merge_summary, NULL,
+		  "alias for --log (deprecated)",
+		  PARSE_OPT_NOARG | PARSE_OPT_HIDDEN },
 		OPT_FILENAME('F', "file", &inpath, "file to read from"),
 		OPT_END()
 	};
diff --git a/builtin-for-each-ref.c b/builtin/for-each-ref.c
index a5a83f1469..7f5011f75e 100644
--- a/builtin-for-each-ref.c
+++ b/builtin/for-each-ref.c
@@ -33,6 +33,8 @@ struct ref_sort {
 struct refinfo {
 	char *refname;
 	unsigned char objectname[20];
+	int flag;
+	const char *symref;
 	struct atom_value *value;
 };
 
@@ -68,6 +70,8 @@ static struct {
 	{ "body" },
 	{ "contents" },
 	{ "upstream" },
+	{ "symref" },
+	{ "flag" },
 };
 
 /*
@@ -82,7 +86,7 @@ static struct {
  */
 static const char **used_atom;
 static cmp_type *used_atom_type;
-static int used_atom_cnt, sort_atom_limit, need_tagged;
+static int used_atom_cnt, sort_atom_limit, need_tagged, need_symref;
 
 /*
  * Used to parse format string and sort specifiers
@@ -133,6 +137,10 @@ static int parse_atom(const char *atom, const char *ep)
 				  (sizeof(*used_atom_type) * used_atom_cnt));
 	used_atom[at] = xmemdupz(atom, ep - atom);
 	used_atom_type[at] = valid_atom[i].cmp_type;
+	if (*atom == '*')
+		need_tagged = 1;
+	if (!strcmp(used_atom[at], "symref"))
+		need_symref = 1;
 	return at;
 }
 
@@ -143,7 +151,8 @@ static const char *find_next(const char *cp)
 {
 	while (*cp) {
 		if (*cp == '%') {
-			/* %( is the start of an atom;
+			/*
+			 * %( is the start of an atom;
 			 * %% is a quoted per-cent.
 			 */
 			if (cp[1] == '(')
@@ -420,7 +429,8 @@ static void grab_person(const char *who, struct atom_value *val, int deref, stru
 			grab_date(wholine, v, name);
 	}
 
-	/* For a tag or a commit object, if "creator" or "creatordate" is
+	/*
+	 * For a tag or a commit object, if "creator" or "creatordate" is
 	 * requested, do something special.
 	 */
 	if (strcmp(who, "tagger") && strcmp(who, "committer"))
@@ -502,7 +512,8 @@ static void grab_sub_body_contents(struct atom_value *val, int deref, struct obj
 	}
 }
 
-/* We want to have empty print-string for field requests
+/*
+ * We want to have empty print-string for field requests
  * that do not apply (e.g. "authordate" for a tag object)
  */
 static void fill_missing_values(struct atom_value *val)
@@ -538,16 +549,23 @@ static void grab_values(struct atom_value *val, int deref, struct object *obj, v
 		grab_person("committer", val, deref, obj, buf, sz);
 		break;
 	case OBJ_TREE:
-		// grab_tree_values(val, deref, obj, buf, sz);
+		/* grab_tree_values(val, deref, obj, buf, sz); */
 		break;
 	case OBJ_BLOB:
-		// grab_blob_values(val, deref, obj, buf, sz);
+		/* grab_blob_values(val, deref, obj, buf, sz); */
 		break;
 	default:
 		die("Eh?  Object of type %d?", obj->type);
 	}
 }
 
+static inline char *copy_advance(char *dst, const char *src)
+{
+	while (*src)
+		*dst++ = *src++;
+	return dst;
+}
+
 /*
  * Parse the object referred by ref, and grab needed value.
  */
@@ -561,6 +579,16 @@ static void populate_value(struct refinfo *ref)
 
 	ref->value = xcalloc(sizeof(struct atom_value), used_atom_cnt);
 
+	if (need_symref && (ref->flag & REF_ISSYMREF) && !ref->symref) {
+		unsigned char unused1[20];
+		const char *symref;
+		symref = resolve_ref(ref->refname, unused1, 1, NULL);
+		if (symref)
+			ref->symref = xstrdup(symref);
+		else
+			ref->symref = "";
+	}
+
 	/* Fill in specials first */
 	for (i = 0; i < used_atom_cnt; i++) {
 		const char *name = used_atom[i];
@@ -576,6 +604,8 @@ static void populate_value(struct refinfo *ref)
 
 		if (!prefixcmp(name, "refname"))
 			refname = ref->refname;
+		else if (!prefixcmp(name, "symref"))
+			refname = ref->symref ? ref->symref : "";
 		else if (!prefixcmp(name, "upstream")) {
 			struct branch *branch;
 			/* only local branches may have an upstream */
@@ -588,6 +618,20 @@ static void populate_value(struct refinfo *ref)
 				continue;
 			refname = branch->merge[0]->dst;
 		}
+		else if (!strcmp(name, "flag")) {
+			char buf[256], *cp = buf;
+			if (ref->flag & REF_ISSYMREF)
+				cp = copy_advance(cp, ",symref");
+			if (ref->flag & REF_ISPACKED)
+				cp = copy_advance(cp, ",packed");
+			if (cp == buf)
+				v->s = "";
+			else {
+				*cp = '\0';
+				v->s = xstrdup(buf + 1);
+			}
+			continue;
+		}
 		else
 			continue;
 
@@ -633,18 +677,21 @@ static void populate_value(struct refinfo *ref)
 	if (!eaten)
 		free(buf);
 
-	/* If there is no atom that wants to know about tagged
+	/*
+	 * If there is no atom that wants to know about tagged
 	 * object, we are done.
 	 */
 	if (!need_tagged || (obj->type != OBJ_TAG))
 		return;
 
-	/* If it is a tag object, see if we use a value that derefs
+	/*
+	 * If it is a tag object, see if we use a value that derefs
 	 * the object, and if we do grab the object it refers to.
 	 */
 	tagged = ((struct tag *)obj)->tagged->sha1;
 
-	/* NEEDSWORK: This derefs tag only once, which
+	/*
+	 * NEEDSWORK: This derefs tag only once, which
 	 * is good to deal with chains of trust, but
 	 * is not consistent with what deref_tag() does
 	 * which peels the onion to the core.
@@ -681,9 +728,8 @@ struct grab_ref_cbdata {
 };
 
 /*
- * A call-back given to for_each_ref().  It is unfortunate that we
- * need to use global variables to pass extra information to this
- * function.
+ * A call-back given to for_each_ref().  Filter refs and keep them for
+ * later object processing.
  */
 static int grab_single_ref(const char *refname, const unsigned char *sha1, int flag, void *cb_data)
 {
@@ -711,13 +757,15 @@ static int grab_single_ref(const char *refname, const unsigned char *sha1, int f
 			return 0;
 	}
 
-	/* We do not open the object yet; sort may only need refname
+	/*
+	 * We do not open the object yet; sort may only need refname
 	 * to do its job and the resulting list may yet to be pruned
 	 * by maxcount logic.
 	 */
 	ref = xcalloc(1, sizeof(*ref));
 	ref->refname = xstrdup(refname);
 	hashcpy(ref->objectname, sha1);
+	ref->flag = flag;
 
 	cnt = cb->grab_cnt;
 	cb->grab_array = xrealloc(cb->grab_array,
@@ -938,13 +986,6 @@ int cmd_for_each_ref(int argc, const char **argv, const char *prefix)
 	refs = cbdata.grab_array;
 	num_refs = cbdata.grab_cnt;
 
-	for (i = 0; i < used_atom_cnt; i++) {
-		if (used_atom[i][0] == '*') {
-			need_tagged = 1;
-			break;
-		}
-	}
-
 	sort_refs(sort, refs, num_refs);
 
 	if (!maxcount || num_refs < maxcount)
diff --git a/builtin-fsck.c b/builtin/fsck.c
index 0929c7f245..0929c7f245 100644
--- a/builtin-fsck.c
+++ b/builtin/fsck.c
diff --git a/builtin-gc.c b/builtin/gc.c
index c304638b78..c304638b78 100644
--- a/builtin-gc.c
+++ b/builtin/gc.c
diff --git a/builtin-grep.c b/builtin/grep.c
index 371db0aa9e..b194ea3cea 100644
--- a/builtin-grep.c
+++ b/builtin/grep.c
@@ -14,10 +14,11 @@
 #include "userdiff.h"
 #include "grep.h"
 #include "quote.h"
+#include "dir.h"
 
 #ifndef NO_PTHREADS
-#include "thread-utils.h"
 #include <pthread.h>
+#include "thread-utils.h"
 #endif
 
 static char const * const grep_usage[] = {
@@ -95,6 +96,9 @@ static pthread_cond_t cond_write;
 /* Signalled when we are finished with everything. */
 static pthread_cond_t cond_result;
 
+static int print_hunk_marks_between_files;
+static int printed_something;
+
 static void add_work(enum work_type type, char *name, void *id)
 {
 	grep_lock();
@@ -158,7 +162,12 @@ static void work_done(struct work_item *w)
 	for(; todo[todo_done].done && todo_done != todo_start;
 	    todo_done = (todo_done+1) % ARRAY_SIZE(todo)) {
 		w = &todo[todo_done];
-		write_or_die(1, w->out.buf, w->out.len);
+		if (w->out.len) {
+			if (print_hunk_marks_between_files && printed_something)
+				write_or_die(1, "--\n", 3);
+			write_or_die(1, w->out.buf, w->out.len);
+			printed_something = 1;
+		}
 		free(w->name);
 		free(w->identifier);
 	}
@@ -288,6 +297,7 @@ static int wait_all(void)
 static int grep_config(const char *var, const char *value, void *cb)
 {
 	struct grep_opt *opt = cb;
+	char *color = NULL;
 
 	switch (userdiff_config(var, value)) {
 	case 0: break;
@@ -295,17 +305,30 @@ static int grep_config(const char *var, const char *value, void *cb)
 	default: return 0;
 	}
 
-	if (!strcmp(var, "color.grep")) {
+	if (!strcmp(var, "color.grep"))
 		opt->color = git_config_colorbool(var, value, -1);
-		return 0;
-	}
-	if (!strcmp(var, "color.grep.match")) {
+	else if (!strcmp(var, "color.grep.context"))
+		color = opt->color_context;
+	else if (!strcmp(var, "color.grep.filename"))
+		color = opt->color_filename;
+	else if (!strcmp(var, "color.grep.function"))
+		color = opt->color_function;
+	else if (!strcmp(var, "color.grep.linenumber"))
+		color = opt->color_lineno;
+	else if (!strcmp(var, "color.grep.match"))
+		color = opt->color_match;
+	else if (!strcmp(var, "color.grep.selected"))
+		color = opt->color_selected;
+	else if (!strcmp(var, "color.grep.separator"))
+		color = opt->color_sep;
+	else
+		return git_color_default_config(var, value, cb);
+	if (color) {
 		if (!value)
 			return config_error_nonbool(var);
-		color_parse(value, var, opt->color_match);
-		return 0;
+		color_parse(value, var, color);
 	}
-	return git_color_default_config(var, value, cb);
+	return 0;
 }
 
 /*
@@ -652,6 +675,24 @@ static int grep_object(struct grep_opt *opt, const char **paths,
 	die("unable to grep from object of type %s", typename(obj->type));
 }
 
+static int grep_directory(struct grep_opt *opt, const char **paths)
+{
+	struct dir_struct dir;
+	int i, hit = 0;
+
+	memset(&dir, 0, sizeof(dir));
+	setup_standard_excludes(&dir);
+
+	fill_directory(&dir, paths);
+	for (i = 0; i < dir.nr; i++) {
+		hit |= grep_file(opt, dir.entries[i]->name);
+		if (hit && opt->status_only)
+			break;
+	}
+	free_grep_patterns(opt);
+	return hit;
+}
+
 static int context_callback(const struct option *opt, const char *arg,
 			    int unset)
 {
@@ -746,9 +787,12 @@ int cmd_grep(int argc, const char **argv, const char *prefix)
 	const char **paths = NULL;
 	int i;
 	int dummy;
+	int nongit = 0, use_index = 1;
 	struct option options[] = {
 		OPT_BOOLEAN(0, "cached", &cached,
 			"search in index instead of in the work tree"),
+		OPT_BOOLEAN(0, "index", &use_index,
+			"--no-index finds in contents not managed by git"),
 		OPT_GROUP(""),
 		OPT_BOOLEAN('v', "invert-match", &opt.invert,
 			"show non-matching lines"),
@@ -789,7 +833,7 @@ int cmd_grep(int argc, const char **argv, const char *prefix)
 			"print NUL after filenames"),
 		OPT_BOOLEAN('c', "count", &opt.count,
 			"show the number of matches instead of matching lines"),
-		OPT_SET_INT(0, "color", &opt.color, "highlight matches", 1),
+		OPT__COLOR(&opt.color, "highlight matches"),
 		OPT_GROUP(""),
 		OPT_CALLBACK('C', NULL, &opt, "n",
 			"show <n> context lines before and after matches",
@@ -831,6 +875,8 @@ int cmd_grep(int argc, const char **argv, const char *prefix)
 		OPT_END()
 	};
 
+	prefix = setup_git_directory_gently(&nongit);
+
 	/*
 	 * 'git grep -h', unlike 'git grep -h <pattern>', is a request
 	 * to show usage information and exit.
@@ -848,7 +894,13 @@ int cmd_grep(int argc, const char **argv, const char *prefix)
 	opt.regflags = REG_NEWLINE;
 	opt.max_depth = -1;
 
-	strcpy(opt.color_match, GIT_COLOR_RED GIT_COLOR_BOLD);
+	strcpy(opt.color_context, "");
+	strcpy(opt.color_filename, "");
+	strcpy(opt.color_function, "");
+	strcpy(opt.color_lineno, "");
+	strcpy(opt.color_match, GIT_COLOR_BOLD_RED);
+	strcpy(opt.color_selected, "");
+	strcpy(opt.color_sep, GIT_COLOR_CYAN);
 	opt.color = -1;
 	git_config(grep_config, &opt);
 	if (opt.color == -1)
@@ -869,6 +921,10 @@ int cmd_grep(int argc, const char **argv, const char *prefix)
 			     PARSE_OPT_STOP_AT_NON_OPTION |
 			     PARSE_OPT_NO_INTERNAL_HELP);
 
+	if (use_index && nongit)
+		/* die the same way as if we did it at the beginning */
+		setup_git_directory();
+
 	/*
 	 * skip a -- separator; we know it cannot be
 	 * separating revisions from pathnames if
@@ -898,8 +954,11 @@ int cmd_grep(int argc, const char **argv, const char *prefix)
 	if (online_cpus() == 1 || !grep_threads_ok(&opt))
 		use_threads = 0;
 
-	if (use_threads)
+	if (use_threads) {
+		if (opt.pre_context || opt.post_context)
+			print_hunk_marks_between_files = 1;
 		start_threads(&opt);
+	}
 #else
 	use_threads = 0;
 #endif
@@ -940,6 +999,18 @@ int cmd_grep(int argc, const char **argv, const char *prefix)
 		paths[1] = NULL;
 	}
 
+	if (!use_index) {
+		int hit;
+		if (cached)
+			die("--cached cannot be used with --no-index.");
+		if (list.nr)
+			die("--no-index cannot be used with revs.");
+		hit = grep_directory(&opt, paths);
+		if (use_threads)
+			hit |= wait_all();
+		return !hit;
+	}
+
 	if (!list.nr) {
 		int hit;
 		if (!cached)
diff --git a/builtin-hash-object.c b/builtin/hash-object.c
index 6a5f5b5f0e..080af1a01b 100644
--- a/builtin-hash-object.c
+++ b/builtin/hash-object.c
@@ -33,6 +33,8 @@ static void hash_object(const char *path, const char *type, int write_object,
 	hash_fd(fd, type, write_object, vpath);
 }
 
+static int no_filters;
+
 static void hash_stdin_paths(const char *type, int write_objects)
 {
 	struct strbuf buf = STRBUF_INIT, nbuf = STRBUF_INIT;
@@ -44,7 +46,8 @@ static void hash_stdin_paths(const char *type, int write_objects)
 				die("line is badly quoted");
 			strbuf_swap(&buf, &nbuf);
 		}
-		hash_object(buf.buf, type, write_objects, buf.buf);
+		hash_object(buf.buf, type, write_objects,
+		    no_filters ? NULL : buf.buf);
 	}
 	strbuf_release(&buf);
 	strbuf_release(&nbuf);
@@ -60,7 +63,6 @@ static const char *type;
 static int write_object;
 static int hashstdin;
 static int stdin_paths;
-static int no_filters;
 static const char *vpath;
 
 static const struct option hash_object_options[] = {
@@ -100,8 +102,6 @@ int cmd_hash_object(int argc, const char **argv, const char *prefix)
 			errstr = "Can't specify files with --stdin-paths";
 		else if (vpath)
 			errstr = "Can't use --stdin-paths with --path";
-		else if (no_filters)
-			errstr = "Can't use --stdin-paths with --no-filters";
 	}
 	else {
 		if (hashstdin > 1)
diff --git a/builtin-help.c b/builtin/help.c
index 3182a2bec4..3182a2bec4 100644
--- a/builtin-help.c
+++ b/builtin/help.c
diff --git a/builtin-index-pack.c b/builtin/index-pack.c
index b4cf8c53e0..a89ae831dd 100644
--- a/builtin-index-pack.c
+++ b/builtin/index-pack.c
@@ -11,7 +11,7 @@
 #include "exec_cmd.h"
 
 static const char index_pack_usage[] =
-"git index-pack [-v] [-o <index-file>] [{ ---keep | --keep=<msg> }] [--strict] { <pack-file> | --stdin [--fix-thin] [<pack-file>] }";
+"git index-pack [-v] [-o <index-file>] [{ --keep | --keep=<msg> }] [--strict] { <pack-file> | --stdin [--fix-thin] [<pack-file>] }";
 
 struct object_entry
 {
@@ -266,26 +266,23 @@ static void unlink_base_data(struct base_data *c)
 
 static void *unpack_entry_data(unsigned long offset, unsigned long size)
 {
+	int status;
 	z_stream stream;
 	void *buf = xmalloc(size);
 
 	memset(&stream, 0, sizeof(stream));
+	git_inflate_init(&stream);
 	stream.next_out = buf;
 	stream.avail_out = size;
-	stream.next_in = fill(1);
-	stream.avail_in = input_len;
-	git_inflate_init(&stream);
 
-	for (;;) {
-		int ret = git_inflate(&stream, 0);
-		use(input_len - stream.avail_in);
-		if (stream.total_out == size && ret == Z_STREAM_END)
-			break;
-		if (ret != Z_OK)
-			bad_object(offset, "inflate returned %d", ret);
+	do {
 		stream.next_in = fill(1);
 		stream.avail_in = input_len;
-	}
+		status = git_inflate(&stream, 0);
+		use(input_len - stream.avail_in);
+	} while (status == Z_OK);
+	if (stream.total_out != size || status != Z_STREAM_END)
+		bad_object(offset, "inflate returned %d", status);
 	git_inflate_end(&stream);
 	return buf;
 }
@@ -359,34 +356,38 @@ static void *get_data_from_pack(struct object_entry *obj)
 {
 	off_t from = obj[0].idx.offset + obj[0].hdr_size;
 	unsigned long len = obj[1].idx.offset - from;
-	unsigned long rdy = 0;
-	unsigned char *src, *data;
+	unsigned char *data, *inbuf;
 	z_stream stream;
-	int st;
+	int status;
 
-	src = xmalloc(len);
-	data = src;
-	do {
-		ssize_t n = pread(pack_fd, data + rdy, len - rdy, from + rdy);
-		if (n < 0)
-			die_errno("cannot pread pack file");
-		if (!n)
-			die("premature end of pack file, %lu bytes missing",
-			    len - rdy);
-		rdy += n;
-	} while (rdy < len);
 	data = xmalloc(obj->size);
+	inbuf = xmalloc((len < 64*1024) ? len : 64*1024);
+
 	memset(&stream, 0, sizeof(stream));
+	git_inflate_init(&stream);
 	stream.next_out = data;
 	stream.avail_out = obj->size;
-	stream.next_in = src;
-	stream.avail_in = len;
-	git_inflate_init(&stream);
-	while ((st = git_inflate(&stream, Z_FINISH)) == Z_OK);
-	git_inflate_end(&stream);
-	if (st != Z_STREAM_END || stream.total_out != obj->size)
+
+	do {
+		ssize_t n = (len < 64*1024) ? len : 64*1024;
+		n = pread(pack_fd, inbuf, n, from);
+		if (n < 0)
+			die_errno("cannot pread pack file");
+		if (!n)
+			die("premature end of pack file, %lu bytes missing", len);
+		from += n;
+		len -= n;
+		stream.next_in = inbuf;
+		stream.avail_in = n;
+		status = git_inflate(&stream, 0);
+	} while (len && status == Z_OK && !stream.avail_in);
+
+	/* This has been inflated OK when first encountered, so... */
+	if (status != Z_STREAM_END || stream.total_out != obj->size)
 		die("serious inflate inconsistency");
-	free(src);
+
+	git_inflate_end(&stream);
+	free(inbuf);
 	return data;
 }
 
@@ -668,25 +669,25 @@ static void parse_pack_objects(unsigned char *sha1)
 static int write_compressed(struct sha1file *f, void *in, unsigned int size)
 {
 	z_stream stream;
-	unsigned long maxsize;
-	void *out;
+	int status;
+	unsigned char outbuf[4096];
 
 	memset(&stream, 0, sizeof(stream));
 	deflateInit(&stream, zlib_compression_level);
-	maxsize = deflateBound(&stream, size);
-	out = xmalloc(maxsize);
-
-	/* Compress it */
 	stream.next_in = in;
 	stream.avail_in = size;
-	stream.next_out = out;
-	stream.avail_out = maxsize;
-	while (deflate(&stream, Z_FINISH) == Z_OK);
-	deflateEnd(&stream);
 
+	do {
+		stream.next_out = outbuf;
+		stream.avail_out = sizeof(outbuf);
+		status = deflate(&stream, Z_FINISH);
+		sha1write(f, outbuf, sizeof(outbuf) - stream.avail_out);
+	} while (status == Z_OK);
+
+	if (status != Z_STREAM_END)
+		die("unable to deflate appended object (%d)", status);
 	size = stream.total_out;
-	sha1write(f, out, size);
-	free(out);
+	deflateEnd(&stream);
 	return size;
 }
 
diff --git a/builtin-init-db.c b/builtin/init-db.c
index dd84caecbc..0271285fad 100644
--- a/builtin-init-db.c
+++ b/builtin/init-db.c
@@ -20,6 +20,7 @@
 
 static int init_is_bare_repository = 0;
 static int init_shared_repository = -1;
+static const char *init_db_template_dir;
 
 static void safe_create_dir(const char *dir, int share)
 {
@@ -121,6 +122,8 @@ static void copy_templates(const char *template_dir)
 	if (!template_dir)
 		template_dir = getenv(TEMPLATE_DIR_ENVIRONMENT);
 	if (!template_dir)
+		template_dir = init_db_template_dir;
+	if (!template_dir)
 		template_dir = system_path(DEFAULT_GIT_TEMPLATE_DIR);
 	if (!template_dir[0])
 		return;
@@ -165,6 +168,14 @@ static void copy_templates(const char *template_dir)
 	closedir(dir);
 }
 
+static int git_init_db_config(const char *k, const char *v, void *cb)
+{
+	if (!strcmp(k, "init.templatedir"))
+		return git_config_pathname(&init_db_template_dir, k, v);
+
+	return 0;
+}
+
 static int create_default_files(const char *template_path)
 {
 	const char *git_dir = get_git_dir();
@@ -190,6 +201,9 @@ static int create_default_files(const char *template_path)
 	safe_create_dir(git_path("refs/heads"), 1);
 	safe_create_dir(git_path("refs/tags"), 1);
 
+	/* Just look for `init.templatedir` */
+	git_config(git_init_db_config, NULL);
+
 	/* First copy the templates -- we might have the default
 	 * config file there, in which case we would want to read
 	 * from it after installing.
@@ -331,11 +345,14 @@ int init_db(const char *template_dir, unsigned int flags)
 		git_config_set("receive.denyNonFastforwards", "true");
 	}
 
-	if (!(flags & INIT_DB_QUIET))
-		printf("%s%s Git repository in %s/\n",
+	if (!(flags & INIT_DB_QUIET)) {
+		const char *git_dir = get_git_dir();
+		int len = strlen(git_dir);
+		printf("%s%s Git repository in %s%s\n",
 		       reinit ? "Reinitialized existing" : "Initialized empty",
 		       shared_repository ? " shared" : "",
-		       get_git_dir());
+		       git_dir, len && git_dir[len-1] != '/' ? "/" : "");
+	}
 
 	return 0;
 }
@@ -446,7 +463,7 @@ int cmd_init_db(int argc, const char **argv, const char *prefix)
 		static char git_dir[PATH_MAX+1];
 
 		setenv(GIT_DIR_ENVIRONMENT,
-			getcwd(git_dir, sizeof(git_dir)), 0);
+			getcwd(git_dir, sizeof(git_dir)), argc > 0);
 	}
 
 	if (init_shared_repository != -1)
diff --git a/builtin-log.c b/builtin/log.c
index 76962e1b08..6208703c06 100644
--- a/builtin-log.c
+++ b/builtin/log.c
@@ -32,10 +32,11 @@ static const char * const builtin_log_usage =
 	"   or: git show [options] <object>...";
 
 static void cmd_log_init(int argc, const char **argv, const char *prefix,
-		      struct rev_info *rev)
+			 struct rev_info *rev, struct setup_revision_opt *opt)
 {
 	int i;
 	int decoration_style = 0;
+	struct userformat_want w;
 
 	rev->abbrev = DEFAULT_ABBREV;
 	rev->commit_format = CMIT_FMT_DEFAULT;
@@ -56,10 +57,15 @@ static void cmd_log_init(int argc, const char **argv, const char *prefix,
 	 */
 	if (argc == 2 && !strcmp(argv[1], "-h"))
 		usage(builtin_log_usage);
-	argc = setup_revisions(argc, argv, rev, "HEAD");
+	argc = setup_revisions(argc, argv, rev, opt);
 
-	if (!rev->show_notes_given && !rev->pretty_given)
+	memset(&w, 0, sizeof(w));
+	userformat_find_requirements(NULL, &w);
+
+	if (!rev->show_notes_given && (!rev->pretty_given || w.notes))
 		rev->show_notes = 1;
+	if (rev->show_notes)
+		init_display_notes(&rev->notes_opt);
 
 	if (rev->diffopt.pickaxe || rev->diffopt.filter)
 		rev->always_show_header = 0;
@@ -262,6 +268,7 @@ static int git_log_config(const char *var, const char *value, void *cb)
 int cmd_whatchanged(int argc, const char **argv, const char *prefix)
 {
 	struct rev_info rev;
+	struct setup_revision_opt opt;
 
 	git_config(git_log_config, NULL);
 
@@ -271,7 +278,9 @@ int cmd_whatchanged(int argc, const char **argv, const char *prefix)
 	init_revisions(&rev, prefix);
 	rev.diff = 1;
 	rev.simplify_history = 0;
-	cmd_log_init(argc, argv, prefix, &rev);
+	memset(&opt, 0, sizeof(opt));
+	opt.def = "HEAD";
+	cmd_log_init(argc, argv, prefix, &rev, &opt);
 	if (!rev.diffopt.output_format)
 		rev.diffopt.output_format = DIFF_FORMAT_RAW;
 	return cmd_log_walk(&rev);
@@ -324,10 +333,26 @@ static int show_tree_object(const unsigned char *sha1,
 	return 0;
 }
 
+static void show_rev_tweak_rev(struct rev_info *rev, struct setup_revision_opt *opt)
+{
+	if (rev->ignore_merges) {
+		/* There was no "-m" on the command line */
+		rev->ignore_merges = 0;
+		if (!rev->first_parent_only && !rev->combine_merges) {
+			/* No "--first-parent", "-c", nor "--cc" */
+			rev->combine_merges = 1;
+			rev->dense_combined_merges = 1;
+		}
+	}
+	if (!rev->diffopt.output_format)
+		rev->diffopt.output_format = DIFF_FORMAT_PATCH;
+}
+
 int cmd_show(int argc, const char **argv, const char *prefix)
 {
 	struct rev_info rev;
 	struct object_array_entry *objects;
+	struct setup_revision_opt opt;
 	int i, count, ret = 0;
 
 	git_config(git_log_config, NULL);
@@ -337,12 +362,12 @@ int cmd_show(int argc, const char **argv, const char *prefix)
 
 	init_revisions(&rev, prefix);
 	rev.diff = 1;
-	rev.combine_merges = 1;
-	rev.dense_combined_merges = 1;
 	rev.always_show_header = 1;
-	rev.ignore_merges = 0;
 	rev.no_walk = 1;
-	cmd_log_init(argc, argv, prefix, &rev);
+	memset(&opt, 0, sizeof(opt));
+	opt.def = "HEAD";
+	opt.tweak = show_rev_tweak_rev;
+	cmd_log_init(argc, argv, prefix, &rev, &opt);
 
 	count = rev.pending.nr;
 	objects = rev.pending.objects;
@@ -405,6 +430,7 @@ int cmd_show(int argc, const char **argv, const char *prefix)
 int cmd_log_reflog(int argc, const char **argv, const char *prefix)
 {
 	struct rev_info rev;
+	struct setup_revision_opt opt;
 
 	git_config(git_log_config, NULL);
 
@@ -415,7 +441,9 @@ int cmd_log_reflog(int argc, const char **argv, const char *prefix)
 	init_reflog_walk(&rev.reflog_info);
 	rev.abbrev_commit = 1;
 	rev.verbose_header = 1;
-	cmd_log_init(argc, argv, prefix, &rev);
+	memset(&opt, 0, sizeof(opt));
+	opt.def = "HEAD";
+	cmd_log_init(argc, argv, prefix, &rev, &opt);
 
 	/*
 	 * This means that we override whatever commit format the user gave
@@ -438,6 +466,7 @@ int cmd_log_reflog(int argc, const char **argv, const char *prefix)
 int cmd_log(int argc, const char **argv, const char *prefix)
 {
 	struct rev_info rev;
+	struct setup_revision_opt opt;
 
 	git_config(git_log_config, NULL);
 
@@ -446,7 +475,9 @@ int cmd_log(int argc, const char **argv, const char *prefix)
 
 	init_revisions(&rev, prefix);
 	rev.always_show_header = 1;
-	cmd_log_init(argc, argv, prefix, &rev);
+	memset(&opt, 0, sizeof(opt));
+	opt.def = "HEAD";
+	cmd_log_init(argc, argv, prefix, &rev, &opt);
 	return cmd_log_walk(&rev);
 }
 
@@ -458,35 +489,28 @@ static int auto_number = 1;
 
 static char *default_attach = NULL;
 
-static char **extra_hdr;
-static int extra_hdr_nr;
-static int extra_hdr_alloc;
-
-static char **extra_to;
-static int extra_to_nr;
-static int extra_to_alloc;
-
-static char **extra_cc;
-static int extra_cc_nr;
-static int extra_cc_alloc;
+static struct string_list extra_hdr;
+static struct string_list extra_to;
+static struct string_list extra_cc;
 
 static void add_header(const char *value)
 {
+	struct string_list_item *item;
 	int len = strlen(value);
 	while (len && value[len - 1] == '\n')
 		len--;
+
 	if (!strncasecmp(value, "to: ", 4)) {
-		ALLOC_GROW(extra_to, extra_to_nr + 1, extra_to_alloc);
-		extra_to[extra_to_nr++] = xstrndup(value + 4, len - 4);
-		return;
-	}
-	if (!strncasecmp(value, "cc: ", 4)) {
-		ALLOC_GROW(extra_cc, extra_cc_nr + 1, extra_cc_alloc);
-		extra_cc[extra_cc_nr++] = xstrndup(value + 4, len - 4);
-		return;
+		item = string_list_append(value + 4, &extra_to);
+		len -= 4;
+	} else if (!strncasecmp(value, "cc: ", 4)) {
+		item = string_list_append(value + 4, &extra_cc);
+		len -= 4;
+	} else {
+		item = string_list_append(value, &extra_hdr);
 	}
-	ALLOC_GROW(extra_hdr, extra_hdr_nr + 1, extra_hdr_alloc);
-	extra_hdr[extra_hdr_nr++] = xstrndup(value, len);
+
+	item->string[len] = '\0';
 }
 
 #define THREAD_SHALLOW 1
@@ -504,11 +528,16 @@ static int git_format_config(const char *var, const char *value, void *cb)
 	}
 	if (!strcmp(var, "format.suffix"))
 		return git_config_string(&fmt_patch_suffix, var, value);
+	if (!strcmp(var, "format.to")) {
+		if (!value)
+			return config_error_nonbool(var);
+		string_list_append(value, &extra_to);
+		return 0;
+	}
 	if (!strcmp(var, "format.cc")) {
 		if (!value)
 			return config_error_nonbool(var);
-		ALLOC_GROW(extra_cc, extra_cc_nr + 1, extra_cc_alloc);
-		extra_cc[extra_cc_nr++] = xstrdup(value);
+		string_list_append(value, &extra_cc);
 		return 0;
 	}
 	if (!strcmp(var, "diff.color") || !strcmp(var, "color.diff")) {
@@ -871,14 +900,31 @@ static int inline_callback(const struct option *opt, const char *arg, int unset)
 
 static int header_callback(const struct option *opt, const char *arg, int unset)
 {
-	add_header(arg);
+	if (unset) {
+		string_list_clear(&extra_hdr, 0);
+		string_list_clear(&extra_to, 0);
+		string_list_clear(&extra_cc, 0);
+	} else {
+	    add_header(arg);
+	}
+	return 0;
+}
+
+static int to_callback(const struct option *opt, const char *arg, int unset)
+{
+	if (unset)
+		string_list_clear(&extra_to, 0);
+	else
+		string_list_append(arg, &extra_to);
 	return 0;
 }
 
 static int cc_callback(const struct option *opt, const char *arg, int unset)
 {
-	ALLOC_GROW(extra_cc, extra_cc_nr + 1, extra_cc_alloc);
-	extra_cc[extra_cc_nr++] = xstrdup(arg);
+	if (unset)
+		string_list_clear(&extra_cc, 0);
+	else
+		string_list_append(arg, &extra_cc);
 	return 0;
 }
 
@@ -887,6 +933,7 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 	struct commit *commit;
 	struct commit **list = NULL;
 	struct rev_info rev;
+	struct setup_revision_opt s_r_opt;
 	int nr = 0, total, i;
 	int use_stdout = 0;
 	int start_number = -1;
@@ -937,10 +984,11 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 		  PARSE_OPT_NONEG | PARSE_OPT_NOARG },
 		OPT_GROUP("Messaging"),
 		{ OPTION_CALLBACK, 0, "add-header", NULL, "header",
-			    "add email header", PARSE_OPT_NONEG,
-			    header_callback },
+			    "add email header", 0, header_callback },
+		{ OPTION_CALLBACK, 0, "to", NULL, "email", "add To: header",
+			    0, to_callback },
 		{ OPTION_CALLBACK, 0, "cc", NULL, "email", "add Cc: header",
-			    PARSE_OPT_NONEG, cc_callback },
+			    0, cc_callback },
 		OPT_STRING(0, "in-reply-to", &in_reply_to, "message-id",
 			    "make first mail a reply to <message-id>"),
 		{ OPTION_CALLBACK, 0, "attach", &rev, "boundary",
@@ -956,6 +1004,9 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 		OPT_END()
 	};
 
+	extra_hdr.strdup_strings = 1;
+	extra_to.strdup_strings = 1;
+	extra_cc.strdup_strings = 1;
 	git_config(git_format_config, NULL);
 	init_revisions(&rev, prefix);
 	rev.commit_format = CMIT_FMT_EMAIL;
@@ -964,8 +1015,9 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 	rev.combine_merges = 0;
 	rev.ignore_merges = 1;
 	DIFF_OPT_SET(&rev.diffopt, RECURSIVE);
-
 	rev.subject_prefix = fmt_patch_subject_prefix;
+	memset(&s_r_opt, 0, sizeof(s_r_opt));
+	s_r_opt.def = "HEAD";
 
 	if (default_attach) {
 		rev.mime_boundary = default_attach;
@@ -992,29 +1044,29 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 		add_signoff = xmemdupz(committer, endpos - committer + 1);
 	}
 
-	for (i = 0; i < extra_hdr_nr; i++) {
-		strbuf_addstr(&buf, extra_hdr[i]);
+	for (i = 0; i < extra_hdr.nr; i++) {
+		strbuf_addstr(&buf, extra_hdr.items[i].string);
 		strbuf_addch(&buf, '\n');
 	}
 
-	if (extra_to_nr)
+	if (extra_to.nr)
 		strbuf_addstr(&buf, "To: ");
-	for (i = 0; i < extra_to_nr; i++) {
+	for (i = 0; i < extra_to.nr; i++) {
 		if (i)
 			strbuf_addstr(&buf, "    ");
-		strbuf_addstr(&buf, extra_to[i]);
-		if (i + 1 < extra_to_nr)
+		strbuf_addstr(&buf, extra_to.items[i].string);
+		if (i + 1 < extra_to.nr)
 			strbuf_addch(&buf, ',');
 		strbuf_addch(&buf, '\n');
 	}
 
-	if (extra_cc_nr)
+	if (extra_cc.nr)
 		strbuf_addstr(&buf, "Cc: ");
-	for (i = 0; i < extra_cc_nr; i++) {
+	for (i = 0; i < extra_cc.nr; i++) {
 		if (i)
 			strbuf_addstr(&buf, "    ");
-		strbuf_addstr(&buf, extra_cc[i]);
-		if (i + 1 < extra_cc_nr)
+		strbuf_addstr(&buf, extra_cc.items[i].string);
+		if (i + 1 < extra_cc.nr)
 			strbuf_addch(&buf, ',');
 		strbuf_addch(&buf, '\n');
 	}
@@ -1037,7 +1089,7 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 	if (keep_subject && subject_prefix)
 		die ("--subject-prefix and -k are mutually exclusive.");
 
-	argc = setup_revisions(argc, argv, &rev, "HEAD");
+	argc = setup_revisions(argc, argv, &rev, &s_r_opt);
 	if (argc > 1)
 		die ("unrecognized argument: %s", argv[1]);
 
@@ -1059,6 +1111,9 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 	if (!DIFF_OPT_TST(&rev.diffopt, TEXT) && !no_binary_diff)
 		DIFF_OPT_SET(&rev.diffopt, BINARY);
 
+	if (rev.show_notes)
+		init_display_notes(&rev.notes_opt);
+
 	if (!use_stdout)
 		output_directory = set_outdir(prefix, output_directory);
 
@@ -1230,6 +1285,9 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 			fclose(stdout);
 	}
 	free(list);
+	string_list_clear(&extra_to, 0);
+	string_list_clear(&extra_cc, 0);
+	string_list_clear(&extra_hdr, 0);
 	if (ignore_if_in_upstream)
 		free_patch_ids(&ids);
 	return 0;
@@ -1249,8 +1307,11 @@ static int add_pending_commit(const char *arg, struct rev_info *revs, int flags)
 	return -1;
 }
 
-static const char cherry_usage[] =
-"git cherry [-v] [<upstream> [<head> [<limit>]]]";
+static const char * const cherry_usage[] = {
+	"git cherry [-v] [<upstream> [<head> [<limit>]]]",
+	NULL
+};
+
 int cmd_cherry(int argc, const char **argv, const char *prefix)
 {
 	struct rev_info revs;
@@ -1261,26 +1322,25 @@ int cmd_cherry(int argc, const char **argv, const char *prefix)
 	const char *upstream;
 	const char *head = "HEAD";
 	const char *limit = NULL;
-	int verbose = 0;
+	int verbose = 0, abbrev = 0;
 
-	if (argc > 1 && !strcmp(argv[1], "-v")) {
-		verbose = 1;
-		argc--;
-		argv++;
-	}
+	struct option options[] = {
+		OPT__ABBREV(&abbrev),
+		OPT__VERBOSE(&verbose),
+		OPT_END()
+	};
 
-	if (argc > 1 && !strcmp(argv[1], "-h"))
-		usage(cherry_usage);
+	argc = parse_options(argc, argv, prefix, options, cherry_usage, 0);
 
 	switch (argc) {
-	case 4:
-		limit = argv[3];
-		/* FALLTHROUGH */
 	case 3:
-		head = argv[2];
+		limit = argv[2];
 		/* FALLTHROUGH */
 	case 2:
-		upstream = argv[1];
+		head = argv[1];
+		/* FALLTHROUGH */
+	case 1:
+		upstream = argv[0];
 		break;
 	default:
 		current_branch = branch_get(NULL);
@@ -1290,7 +1350,7 @@ int cmd_cherry(int argc, const char **argv, const char *prefix)
 			fprintf(stderr, "Could not find a tracked"
 					" remote branch, please"
 					" specify <upstream> manually.\n");
-			usage(cherry_usage);
+			usage_with_options(cherry_usage, options);
 		}
 
 		upstream = current_branch->merge[0]->dst;
@@ -1343,12 +1403,13 @@ int cmd_cherry(int argc, const char **argv, const char *prefix)
 			pretty_print_commit(CMIT_FMT_ONELINE, commit,
 					    &buf, &ctx);
 			printf("%c %s %s\n", sign,
-			       sha1_to_hex(commit->object.sha1), buf.buf);
+			       find_unique_abbrev(commit->object.sha1, abbrev),
+			       buf.buf);
 			strbuf_release(&buf);
 		}
 		else {
 			printf("%c %s\n", sign,
-			       sha1_to_hex(commit->object.sha1));
+			       find_unique_abbrev(commit->object.sha1, abbrev));
 		}
 
 		list = list->next;
diff --git a/builtin-ls-files.c b/builtin/ls-files.c
index b065061392..0804047693 100644
--- a/builtin-ls-files.c
+++ b/builtin/ls-files.c
@@ -26,8 +26,9 @@ static int show_killed;
 static int show_valid_bit;
 static int line_terminator = '\n';
 
+static const char *prefix;
+static int max_prefix_len;
 static int prefix_len;
-static int prefix_offset;
 static const char **pathspec;
 static int error_unmatch;
 static char *ps_matched;
@@ -43,10 +44,15 @@ static const char *tag_modified = "";
 static const char *tag_skip_worktree = "";
 static const char *tag_resolve_undo = "";
 
+static void write_name(const char* name, size_t len)
+{
+	write_name_quoted_relative(name, len, prefix, prefix_len, stdout,
+			line_terminator);
+}
+
 static void show_dir_entry(const char *tag, struct dir_entry *ent)
 {
-	int len = prefix_len;
-	int offset = prefix_offset;
+	int len = max_prefix_len;
 
 	if (len >= ent->len)
 		die("git ls-files: internal error - directory entry not superset of prefix");
@@ -55,7 +61,7 @@ static void show_dir_entry(const char *tag, struct dir_entry *ent)
 		return;
 
 	fputs(tag, stdout);
-	write_name_quoted(ent->name + offset, stdout, line_terminator);
+	write_name(ent->name, ent->len);
 }
 
 static void show_other_files(struct dir_struct *dir)
@@ -121,8 +127,7 @@ static void show_killed_files(struct dir_struct *dir)
 
 static void show_ce_entry(const char *tag, struct cache_entry *ce)
 {
-	int len = prefix_len;
-	int offset = prefix_offset;
+	int len = max_prefix_len;
 
 	if (len >= ce_namelen(ce))
 		die("git ls-files: internal error - cache entry not superset of prefix");
@@ -153,46 +158,42 @@ static void show_ce_entry(const char *tag, struct cache_entry *ce)
 		printf("%s%06o %s %d\t",
 		       tag,
 		       ce->ce_mode,
-		       abbrev ? find_unique_abbrev(ce->sha1,abbrev)
-				: sha1_to_hex(ce->sha1),
+		       find_unique_abbrev(ce->sha1,abbrev),
 		       ce_stage(ce));
 	}
-	write_name_quoted(ce->name + offset, stdout, line_terminator);
+	write_name(ce->name, ce_namelen(ce));
 }
 
 static int show_one_ru(struct string_list_item *item, void *cbdata)
 {
-	int offset = prefix_offset;
 	const char *path = item->string;
 	struct resolve_undo_info *ui = item->util;
 	int i, len;
 
 	len = strlen(path);
-	if (len < prefix_len)
+	if (len < max_prefix_len)
 		return 0; /* outside of the prefix */
-	if (!match_pathspec(pathspec, path, len, prefix_len, ps_matched))
+	if (!match_pathspec(pathspec, path, len, max_prefix_len, ps_matched))
 		return 0; /* uninterested */
 	for (i = 0; i < 3; i++) {
 		if (!ui->mode[i])
 			continue;
 		printf("%s%06o %s %d\t", tag_resolve_undo, ui->mode[i],
-		       abbrev
-		       ? find_unique_abbrev(ui->sha1[i], abbrev)
-		       : sha1_to_hex(ui->sha1[i]),
+		       find_unique_abbrev(ui->sha1[i], abbrev),
 		       i + 1);
-		write_name_quoted(path + offset, stdout, line_terminator);
+		write_name(path, len);
 	}
 	return 0;
 }
 
-static void show_ru_info(const char *prefix)
+static void show_ru_info(void)
 {
 	if (!the_index.resolve_undo)
 		return;
 	for_each_string_list(show_one_ru, the_index.resolve_undo, NULL);
 }
 
-static void show_files(struct dir_struct *dir, const char *prefix)
+static void show_files(struct dir_struct *dir)
 {
 	int i;
 
@@ -246,7 +247,7 @@ static void show_files(struct dir_struct *dir, const char *prefix)
  */
 static void prune_cache(const char *prefix)
 {
-	int pos = cache_name_pos(prefix, prefix_len);
+	int pos = cache_name_pos(prefix, max_prefix_len);
 	unsigned int first, last;
 
 	if (pos < 0)
@@ -259,7 +260,7 @@ static void prune_cache(const char *prefix)
 	while (last > first) {
 		int next = (last + first) >> 1;
 		struct cache_entry *ce = active_cache[next];
-		if (!strncmp(ce->name, prefix, prefix_len)) {
+		if (!strncmp(ce->name, prefix, max_prefix_len)) {
 			first = next+1;
 			continue;
 		}
@@ -268,11 +269,16 @@ static void prune_cache(const char *prefix)
 	active_nr = last;
 }
 
-static const char *verify_pathspec(const char *prefix)
+static const char *pathspec_prefix(const char *prefix)
 {
 	const char **p, *n, *prev;
 	unsigned long max;
 
+	if (!pathspec) {
+		max_prefix_len = prefix ? strlen(prefix) : 0;
+		return prefix;
+	}
+
 	prev = NULL;
 	max = PATH_MAX;
 	for (p = pathspec; (n = *p) != NULL; p++) {
@@ -294,10 +300,7 @@ static const char *verify_pathspec(const char *prefix)
 		}
 	}
 
-	if (prefix_offset > max || memcmp(prev, prefix, prefix_offset))
-		die("git ls-files: cannot generate relative filenames containing '..'");
-
-	prefix_len = max;
+	max_prefix_len = max;
 	return max ? xmemdupz(prev, max) : NULL;
 }
 
@@ -377,7 +380,7 @@ void overlay_tree_on_cache(const char *tree_name, const char *prefix)
 	}
 }
 
-int report_path_error(const char *ps_matched, const char **pathspec, int prefix_offset)
+int report_path_error(const char *ps_matched, const char **pathspec, int prefix_len)
 {
 	/*
 	 * Make sure all pathspec matched; otherwise it is an error.
@@ -407,7 +410,7 @@ int report_path_error(const char *ps_matched, const char **pathspec, int prefix_
 			continue;
 
 		error("pathspec '%s' did not match any file(s) known to git.",
-		      pathspec[num] + prefix_offset);
+		      pathspec[num] + prefix_len);
 		errors++;
 	}
 	return errors;
@@ -459,9 +462,10 @@ static int option_parse_exclude_standard(const struct option *opt,
 	return 0;
 }
 
-int cmd_ls_files(int argc, const char **argv, const char *prefix)
+int cmd_ls_files(int argc, const char **argv, const char *cmd_prefix)
 {
 	int require_work_tree = 0, show_tag = 0;
+	const char *max_prefix;
 	struct dir_struct dir;
 	struct option builtin_ls_files_options[] = {
 		{ OPTION_CALLBACK, 'z', NULL, NULL, NULL,
@@ -507,7 +511,7 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix)
 		{ OPTION_CALLBACK, 0, "exclude-standard", &dir, NULL,
 			"add the standard git exclusions",
 			PARSE_OPT_NOARG, option_parse_exclude_standard },
-		{ OPTION_SET_INT, 0, "full-name", &prefix_offset, NULL,
+		{ OPTION_SET_INT, 0, "full-name", &prefix_len, NULL,
 			"make the output relative to the project top directory",
 			PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL },
 		OPT_BOOLEAN(0, "error-unmatch", &error_unmatch,
@@ -519,8 +523,9 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix)
 	};
 
 	memset(&dir, 0, sizeof(dir));
+	prefix = cmd_prefix;
 	if (prefix)
-		prefix_offset = strlen(prefix);
+		prefix_len = strlen(prefix);
 	git_config(git_default_config, NULL);
 
 	if (read_cache() < 0)
@@ -558,9 +563,8 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix)
 	if (pathspec)
 		strip_trailing_slash_from_submodules();
 
-	/* Verify that the pathspec matches the prefix */
-	if (pathspec)
-		prefix = verify_pathspec(prefix);
+	/* Find common prefix for all pathspec's */
+	max_prefix = pathspec_prefix(prefix);
 
 	/* Treat unmatching pathspec elements as errors */
 	if (pathspec && error_unmatch) {
@@ -578,8 +582,8 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix)
 	      show_killed | show_modified | show_resolve_undo))
 		show_cached = 1;
 
-	if (prefix)
-		prune_cache(prefix);
+	if (max_prefix)
+		prune_cache(max_prefix);
 	if (with_tree) {
 		/*
 		 * Basic sanity check; show-stages and show-unmerged
@@ -587,15 +591,15 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix)
 		 */
 		if (show_stage || show_unmerged)
 			die("ls-files --with-tree is incompatible with -s or -u");
-		overlay_tree_on_cache(with_tree, prefix);
+		overlay_tree_on_cache(with_tree, max_prefix);
 	}
-	show_files(&dir, prefix);
+	show_files(&dir);
 	if (show_resolve_undo)
-		show_ru_info(prefix);
+		show_ru_info();
 
 	if (ps_matched) {
 		int bad;
-		bad = report_path_error(ps_matched, pathspec, prefix_offset);
+		bad = report_path_error(ps_matched, pathspec, prefix_len);
 		if (bad)
 			fprintf(stderr, "Did you forget to 'git add'?\n");
 
diff --git a/builtin-ls-remote.c b/builtin/ls-remote.c
index 70f5622d9d..70f5622d9d 100644
--- a/builtin-ls-remote.c
+++ b/builtin/ls-remote.c
diff --git a/builtin-ls-tree.c b/builtin/ls-tree.c
index 4484185afc..dc86b0d9a9 100644
--- a/builtin-ls-tree.c
+++ b/builtin/ls-tree.c
@@ -103,13 +103,11 @@ static int show_tree(const unsigned char *sha1, const char *base, int baselen,
 			} else
 				strcpy(size_text, "-");
 			printf("%06o %s %s %7s\t", mode, type,
-			       abbrev ? find_unique_abbrev(sha1, abbrev)
-				      : sha1_to_hex(sha1),
+			       find_unique_abbrev(sha1, abbrev),
 			       size_text);
 		} else
 			printf("%06o %s %s\t", mode, type,
-			       abbrev ? find_unique_abbrev(sha1, abbrev)
-			              : sha1_to_hex(sha1));
+			       find_unique_abbrev(sha1, abbrev));
 	}
 	write_name_quotedpfx(base + chomp_prefix, baselen - chomp_prefix,
 			  pathname, stdout, line_termination);
diff --git a/builtin-mailinfo.c b/builtin/mailinfo.c
index ce2ef6bede..4a9729b9b3 100644
--- a/builtin-mailinfo.c
+++ b/builtin/mailinfo.c
@@ -746,7 +746,8 @@ static int is_scissors_line(const struct strbuf *line)
 			continue;
 		}
 		if (i + 1 < len &&
-		    (!memcmp(buf + i, ">8", 2) || !memcmp(buf + i, "8<", 2))) {
+		    (!memcmp(buf + i, ">8", 2) || !memcmp(buf + i, "8<", 2) ||
+		     !memcmp(buf + i, ">%", 2) || !memcmp(buf + i, "%<", 2))) {
 			in_perforation = 1;
 			perforation += 2;
 			scissors += 2;
diff --git a/builtin-mailsplit.c b/builtin/mailsplit.c
index 207e358ed1..cdfc1b7042 100644
--- a/builtin-mailsplit.c
+++ b/builtin/mailsplit.c
@@ -10,7 +10,7 @@
 #include "strbuf.h"
 
 static const char git_mailsplit_usage[] =
-"git mailsplit [-d<prec>] [-f<n>] [-b] -o<directory> [<mbox>|<Maildir>...]";
+"git mailsplit [-d<prec>] [-f<n>] [-b] [--keep-cr] -o<directory> [<mbox>|<Maildir>...]";
 
 static int is_from_line(const char *line, int len)
 {
diff --git a/builtin-merge-base.c b/builtin/merge-base.c
index 54e7ec2237..54e7ec2237 100644
--- a/builtin-merge-base.c
+++ b/builtin/merge-base.c
diff --git a/builtin-merge-file.c b/builtin/merge-file.c
index 1e70073a7e..b8e9e5ba01 100644
--- a/builtin-merge-file.c
+++ b/builtin/merge-file.c
@@ -25,32 +25,37 @@ int cmd_merge_file(int argc, const char **argv, const char *prefix)
 	const char *names[3] = { NULL, NULL, NULL };
 	mmfile_t mmfs[3];
 	mmbuffer_t result = {NULL, 0};
-	xmparam_t xmp = {{XDF_NEED_MINIMAL}};
+	xmparam_t xmp = {{0}};
 	int ret = 0, i = 0, to_stdout = 0;
-	int level = XDL_MERGE_ZEALOUS_ALNUM;
-	int style = 0, quiet = 0;
-	int favor = 0;
+	int quiet = 0;
 	int nongit;
-
 	struct option options[] = {
 		OPT_BOOLEAN('p', "stdout", &to_stdout, "send results to standard output"),
-		OPT_SET_INT(0, "diff3", &style, "use a diff3 based merge", XDL_MERGE_DIFF3),
-		OPT_SET_INT(0, "ours", &favor, "for conflicts, use our version",
+		OPT_SET_INT(0, "diff3", &xmp.style, "use a diff3 based merge", XDL_MERGE_DIFF3),
+		OPT_SET_INT(0, "ours", &xmp.favor, "for conflicts, use our version",
 			    XDL_MERGE_FAVOR_OURS),
-		OPT_SET_INT(0, "theirs", &favor, "for conflicts, use their version",
+		OPT_SET_INT(0, "theirs", &xmp.favor, "for conflicts, use their version",
 			    XDL_MERGE_FAVOR_THEIRS),
+		OPT_SET_INT(0, "union", &xmp.favor, "for conflicts, use a union version",
+			    XDL_MERGE_FAVOR_UNION),
+		OPT_INTEGER(0, "marker-size", &xmp.marker_size,
+			    "for conflicts, use this marker size"),
 		OPT__QUIET(&quiet),
 		OPT_CALLBACK('L', NULL, names, "name",
 			     "set labels for file1/orig_file/file2", &label_cb),
 		OPT_END(),
 	};
 
+	xmp.level = XDL_MERGE_ZEALOUS_ALNUM;
+	xmp.style = 0;
+	xmp.favor = 0;
+
 	prefix = setup_git_directory_gently(&nongit);
 	if (!nongit) {
 		/* Read the configuration file */
 		git_config(git_xmerge_config, NULL);
 		if (0 <= git_xmerge_style)
-			style = git_xmerge_style;
+			xmp.style = git_xmerge_style;
 	}
 
 	argc = parse_options(argc, argv, prefix, options, merge_file_usage, 0);
@@ -72,8 +77,10 @@ int cmd_merge_file(int argc, const char **argv, const char *prefix)
 					argv[i]);
 	}
 
-	ret = xdl_merge(mmfs + 1, mmfs + 0, names[0], mmfs + 2, names[2],
-			&xmp, XDL_MERGE_FLAGS(level, style, favor), &result);
+	xmp.ancestor = names[1];
+	xmp.file1 = names[0];
+	xmp.file2 = names[2];
+	ret = xdl_merge(mmfs + 1, mmfs + 0, mmfs + 2, &xmp, &result);
 
 	for (i = 0; i < 3; i++)
 		free(mmfs[i].ptr);
diff --git a/builtin-merge-index.c b/builtin/merge-index.c
index 2c4cf5e559..2c4cf5e559 100644
--- a/builtin-merge-index.c
+++ b/builtin/merge-index.c
diff --git a/builtin-merge-ours.c b/builtin/merge-ours.c
index 684411694f..684411694f 100644
--- a/builtin-merge-ours.c
+++ b/builtin/merge-ours.c
diff --git a/builtin-merge-recursive.c b/builtin/merge-recursive.c
index d8875d5892..d8875d5892 100644
--- a/builtin-merge-recursive.c
+++ b/builtin/merge-recursive.c
diff --git a/builtin-merge-tree.c b/builtin/merge-tree.c
index a4a4f2ce4c..fc00d794d6 100644
--- a/builtin-merge-tree.c
+++ b/builtin/merge-tree.c
@@ -106,7 +106,7 @@ static void show_diff(struct merge_list *entry)
 	xdemitconf_t xecfg;
 	xdemitcb_t ecb;
 
-	xpp.flags = XDF_NEED_MINIMAL;
+	xpp.flags = 0;
 	memset(&xecfg, 0, sizeof(xecfg));
 	xecfg.ctxlen = 3;
 	ecb.outf = show_outf;
diff --git a/builtin-merge.c b/builtin/merge.c
index 3aaec7bed7..cae1cbee26 100644
--- a/builtin-merge.c
+++ b/builtin/merge.c
@@ -667,7 +667,7 @@ static int count_unmerged_entries(void)
 	return ret;
 }
 
-static int checkout_fast_forward(unsigned char *head, unsigned char *remote)
+int checkout_fast_forward(const unsigned char *head, const unsigned char *remote)
 {
 	struct tree *trees[MAX_UNPACK_TREES];
 	struct unpack_trees_options opts;
@@ -973,7 +973,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix)
 		reset_hard(remote_head->sha1, 0);
 		return 0;
 	} else {
-		struct strbuf msg = STRBUF_INIT;
+		struct strbuf merge_names = STRBUF_INIT;
 
 		/* We are invoked directly as the first-class UI. */
 		head_arg = "HEAD";
@@ -986,13 +986,17 @@ int cmd_merge(int argc, const char **argv, const char *prefix)
 		 * codepath so we discard the error in this
 		 * loop.
 		 */
-		if (!have_message) {
-			for (i = 0; i < argc; i++)
-				merge_name(argv[i], &msg);
-			fmt_merge_msg(option_log, &msg, &merge_msg);
-			if (merge_msg.len)
-				strbuf_setlen(&merge_msg, merge_msg.len-1);
-		}
+		for (i = 0; i < argc; i++)
+			merge_name(argv[i], &merge_names);
+
+		if (have_message && option_log)
+			fmt_merge_msg_shortlog(&merge_names, &merge_msg);
+		else if (!have_message)
+			fmt_merge_msg(option_log, &merge_names, &merge_msg);
+
+
+		if (!(have_message && !option_log) && merge_msg.len)
+			strbuf_setlen(&merge_msg, merge_msg.len-1);
 	}
 
 	if (head_invalid || !argc)
diff --git a/builtin-mktag.c b/builtin/mktag.c
index 1cb0f3f2a7..1cb0f3f2a7 100644
--- a/builtin-mktag.c
+++ b/builtin/mktag.c
diff --git a/builtin-mktree.c b/builtin/mktree.c
index 098395fda1..098395fda1 100644
--- a/builtin-mktree.c
+++ b/builtin/mktree.c
diff --git a/builtin-mv.c b/builtin/mv.c
index c07f53b343..c07f53b343 100644
--- a/builtin-mv.c
+++ b/builtin/mv.c
diff --git a/builtin-name-rev.c b/builtin/name-rev.c
index 06a38ac8c1..06a38ac8c1 100644
--- a/builtin-name-rev.c
+++ b/builtin/name-rev.c
diff --git a/builtin/notes.c b/builtin/notes.c
new file mode 100644
index 0000000000..26617546c8
--- /dev/null
+++ b/builtin/notes.c
@@ -0,0 +1,862 @@
+/*
+ * Builtin "git notes"
+ *
+ * Copyright (c) 2010 Johan Herland <johan@herland.net>
+ *
+ * Based on git-notes.sh by Johannes Schindelin,
+ * and builtin-tag.c by Kristian Høgsberg and Carlos Rica.
+ */
+
+#include "cache.h"
+#include "builtin.h"
+#include "notes.h"
+#include "blob.h"
+#include "commit.h"
+#include "refs.h"
+#include "exec_cmd.h"
+#include "run-command.h"
+#include "parse-options.h"
+#include "string-list.h"
+
+static const char * const git_notes_usage[] = {
+	"git notes [--ref <notes_ref>] [list [<object>]]",
+	"git notes [--ref <notes_ref>] add [-f] [-m <msg> | -F <file> | (-c | -C) <object>] [<object>]",
+	"git notes [--ref <notes_ref>] copy [-f] <from-object> <to-object>",
+	"git notes [--ref <notes_ref>] append [-m <msg> | -F <file> | (-c | -C) <object>] [<object>]",
+	"git notes [--ref <notes_ref>] edit [<object>]",
+	"git notes [--ref <notes_ref>] show [<object>]",
+	"git notes [--ref <notes_ref>] remove [<object>]",
+	"git notes [--ref <notes_ref>] prune",
+	NULL
+};
+
+static const char * const git_notes_list_usage[] = {
+	"git notes [list [<object>]]",
+	NULL
+};
+
+static const char * const git_notes_add_usage[] = {
+	"git notes add [<options>] [<object>]",
+	NULL
+};
+
+static const char * const git_notes_copy_usage[] = {
+	"git notes copy [<options>] <from-object> <to-object>",
+	"git notes copy --stdin [<from-object> <to-object>]...",
+	NULL
+};
+
+static const char * const git_notes_append_usage[] = {
+	"git notes append [<options>] [<object>]",
+	NULL
+};
+
+static const char * const git_notes_edit_usage[] = {
+	"git notes edit [<object>]",
+	NULL
+};
+
+static const char * const git_notes_show_usage[] = {
+	"git notes show [<object>]",
+	NULL
+};
+
+static const char * const git_notes_remove_usage[] = {
+	"git notes remove [<object>]",
+	NULL
+};
+
+static const char * const git_notes_prune_usage[] = {
+	"git notes prune",
+	NULL
+};
+
+static const char note_template[] =
+	"\n"
+	"#\n"
+	"# Write/edit the notes for the following object:\n"
+	"#\n";
+
+struct msg_arg {
+	int given;
+	int use_editor;
+	struct strbuf buf;
+};
+
+static int list_each_note(const unsigned char *object_sha1,
+		const unsigned char *note_sha1, char *note_path,
+		void *cb_data)
+{
+	printf("%s %s\n", sha1_to_hex(note_sha1), sha1_to_hex(object_sha1));
+	return 0;
+}
+
+static void write_note_data(int fd, const unsigned char *sha1)
+{
+	unsigned long size;
+	enum object_type type;
+	char *buf = read_sha1_file(sha1, &type, &size);
+	if (buf) {
+		if (size)
+			write_or_die(fd, buf, size);
+		free(buf);
+	}
+}
+
+static void write_commented_object(int fd, const unsigned char *object)
+{
+	const char *show_args[5] =
+		{"show", "--stat", "--no-notes", sha1_to_hex(object), NULL};
+	struct child_process show;
+	struct strbuf buf = STRBUF_INIT;
+	FILE *show_out;
+
+	/* Invoke "git show --stat --no-notes $object" */
+	memset(&show, 0, sizeof(show));
+	show.argv = show_args;
+	show.no_stdin = 1;
+	show.out = -1;
+	show.err = 0;
+	show.git_cmd = 1;
+	if (start_command(&show))
+		die("unable to start 'show' for object '%s'",
+		    sha1_to_hex(object));
+
+	/* Open the output as FILE* so strbuf_getline() can be used. */
+	show_out = xfdopen(show.out, "r");
+	if (show_out == NULL)
+		die_errno("can't fdopen 'show' output fd");
+
+	/* Prepend "# " to each output line and write result to 'fd' */
+	while (strbuf_getline(&buf, show_out, '\n') != EOF) {
+		write_or_die(fd, "# ", 2);
+		write_or_die(fd, buf.buf, buf.len);
+		write_or_die(fd, "\n", 1);
+	}
+	strbuf_release(&buf);
+	if (fclose(show_out))
+		die_errno("failed to close pipe to 'show' for object '%s'",
+			  sha1_to_hex(object));
+	if (finish_command(&show))
+		die("failed to finish 'show' for object '%s'",
+		    sha1_to_hex(object));
+}
+
+static void create_note(const unsigned char *object, struct msg_arg *msg,
+			int append_only, const unsigned char *prev,
+			unsigned char *result)
+{
+	char *path = NULL;
+
+	if (msg->use_editor || !msg->given) {
+		int fd;
+
+		/* write the template message before editing: */
+		path = git_pathdup("NOTES_EDITMSG");
+		fd = open(path, O_CREAT | O_TRUNC | O_WRONLY, 0600);
+		if (fd < 0)
+			die_errno("could not create file '%s'", path);
+
+		if (msg->given)
+			write_or_die(fd, msg->buf.buf, msg->buf.len);
+		else if (prev && !append_only)
+			write_note_data(fd, prev);
+		write_or_die(fd, note_template, strlen(note_template));
+
+		write_commented_object(fd, object);
+
+		close(fd);
+		strbuf_reset(&(msg->buf));
+
+		if (launch_editor(path, &(msg->buf), NULL)) {
+			die("Please supply the note contents using either -m" \
+			    " or -F option");
+		}
+		stripspace(&(msg->buf), 1);
+	}
+
+	if (prev && append_only) {
+		/* Append buf to previous note contents */
+		unsigned long size;
+		enum object_type type;
+		char *prev_buf = read_sha1_file(prev, &type, &size);
+
+		strbuf_grow(&(msg->buf), size + 1);
+		if (msg->buf.len && prev_buf && size)
+			strbuf_insert(&(msg->buf), 0, "\n", 1);
+		if (prev_buf && size)
+			strbuf_insert(&(msg->buf), 0, prev_buf, size);
+		free(prev_buf);
+	}
+
+	if (!msg->buf.len) {
+		fprintf(stderr, "Removing note for object %s\n",
+			sha1_to_hex(object));
+		hashclr(result);
+	} else {
+		if (write_sha1_file(msg->buf.buf, msg->buf.len, blob_type, result)) {
+			error("unable to write note object");
+			if (path)
+				error("The note contents has been left in %s",
+				      path);
+			exit(128);
+		}
+	}
+
+	if (path) {
+		unlink_or_warn(path);
+		free(path);
+	}
+}
+
+static int parse_msg_arg(const struct option *opt, const char *arg, int unset)
+{
+	struct msg_arg *msg = opt->value;
+
+	strbuf_grow(&(msg->buf), strlen(arg) + 2);
+	if (msg->buf.len)
+		strbuf_addch(&(msg->buf), '\n');
+	strbuf_addstr(&(msg->buf), arg);
+	stripspace(&(msg->buf), 0);
+
+	msg->given = 1;
+	return 0;
+}
+
+static int parse_file_arg(const struct option *opt, const char *arg, int unset)
+{
+	struct msg_arg *msg = opt->value;
+
+	if (msg->buf.len)
+		strbuf_addch(&(msg->buf), '\n');
+	if (!strcmp(arg, "-")) {
+		if (strbuf_read(&(msg->buf), 0, 1024) < 0)
+			die_errno("cannot read '%s'", arg);
+	} else if (strbuf_read_file(&(msg->buf), arg, 1024) < 0)
+		die_errno("could not open or read '%s'", arg);
+	stripspace(&(msg->buf), 0);
+
+	msg->given = 1;
+	return 0;
+}
+
+static int parse_reuse_arg(const struct option *opt, const char *arg, int unset)
+{
+	struct msg_arg *msg = opt->value;
+	char *buf;
+	unsigned char object[20];
+	enum object_type type;
+	unsigned long len;
+
+	if (msg->buf.len)
+		strbuf_addch(&(msg->buf), '\n');
+
+	if (get_sha1(arg, object))
+		die("Failed to resolve '%s' as a valid ref.", arg);
+	if (!(buf = read_sha1_file(object, &type, &len)) || !len) {
+		free(buf);
+		die("Failed to read object '%s'.", arg);;
+	}
+	strbuf_add(&(msg->buf), buf, len);
+	free(buf);
+
+	msg->given = 1;
+	return 0;
+}
+
+static int parse_reedit_arg(const struct option *opt, const char *arg, int unset)
+{
+	struct msg_arg *msg = opt->value;
+	msg->use_editor = 1;
+	return parse_reuse_arg(opt, arg, unset);
+}
+
+int commit_notes(struct notes_tree *t, const char *msg)
+{
+	struct commit_list *parent;
+	unsigned char tree_sha1[20], prev_commit[20], new_commit[20];
+	struct strbuf buf = STRBUF_INIT;
+
+	if (!t)
+		t = &default_notes_tree;
+	if (!t->initialized || !t->ref || !*t->ref)
+		die("Cannot commit uninitialized/unreferenced notes tree");
+	if (!t->dirty)
+		return 0; /* don't have to commit an unchanged tree */
+
+	/* Prepare commit message and reflog message */
+	strbuf_addstr(&buf, "notes: "); /* commit message starts at index 7 */
+	strbuf_addstr(&buf, msg);
+	if (buf.buf[buf.len - 1] != '\n')
+		strbuf_addch(&buf, '\n'); /* Make sure msg ends with newline */
+
+	/* Convert notes tree to tree object */
+	if (write_notes_tree(t, tree_sha1))
+		die("Failed to write current notes tree to database");
+
+	/* Create new commit for the tree object */
+	if (!read_ref(t->ref, prev_commit)) { /* retrieve parent commit */
+		parent = xmalloc(sizeof(*parent));
+		parent->item = lookup_commit(prev_commit);
+		parent->next = NULL;
+	} else {
+		hashclr(prev_commit);
+		parent = NULL;
+	}
+	if (commit_tree(buf.buf + 7, tree_sha1, parent, new_commit, NULL))
+		die("Failed to commit notes tree to database");
+
+	/* Update notes ref with new commit */
+	update_ref(buf.buf, t->ref, new_commit, prev_commit, 0, DIE_ON_ERR);
+
+	strbuf_release(&buf);
+	return 0;
+}
+
+combine_notes_fn *parse_combine_notes_fn(const char *v)
+{
+	if (!strcasecmp(v, "overwrite"))
+		return combine_notes_overwrite;
+	else if (!strcasecmp(v, "ignore"))
+		return combine_notes_ignore;
+	else if (!strcasecmp(v, "concatenate"))
+		return combine_notes_concatenate;
+	else
+		return NULL;
+}
+
+static int notes_rewrite_config(const char *k, const char *v, void *cb)
+{
+	struct notes_rewrite_cfg *c = cb;
+	if (!prefixcmp(k, "notes.rewrite.") && !strcmp(k+14, c->cmd)) {
+		c->enabled = git_config_bool(k, v);
+		return 0;
+	} else if (!c->mode_from_env && !strcmp(k, "notes.rewritemode")) {
+		if (!v)
+			config_error_nonbool(k);
+		c->combine = parse_combine_notes_fn(v);
+		if (!c->combine) {
+			error("Bad notes.rewriteMode value: '%s'", v);
+			return 1;
+		}
+		return 0;
+	} else if (!c->refs_from_env && !strcmp(k, "notes.rewriteref")) {
+		/* note that a refs/ prefix is implied in the
+		 * underlying for_each_glob_ref */
+		if (!prefixcmp(v, "refs/notes/"))
+			string_list_add_refs_by_glob(c->refs, v);
+		else
+			warning("Refusing to rewrite notes in %s"
+				" (outside of refs/notes/)", v);
+		return 0;
+	}
+
+	return 0;
+}
+
+
+struct notes_rewrite_cfg *init_copy_notes_for_rewrite(const char *cmd)
+{
+	struct notes_rewrite_cfg *c = xmalloc(sizeof(struct notes_rewrite_cfg));
+	const char *rewrite_mode_env = getenv(GIT_NOTES_REWRITE_MODE_ENVIRONMENT);
+	const char *rewrite_refs_env = getenv(GIT_NOTES_REWRITE_REF_ENVIRONMENT);
+	c->cmd = cmd;
+	c->enabled = 1;
+	c->combine = combine_notes_concatenate;
+	c->refs = xcalloc(1, sizeof(struct string_list));
+	c->refs->strdup_strings = 1;
+	c->refs_from_env = 0;
+	c->mode_from_env = 0;
+	if (rewrite_mode_env) {
+		c->mode_from_env = 1;
+		c->combine = parse_combine_notes_fn(rewrite_mode_env);
+		if (!c->combine)
+			error("Bad " GIT_NOTES_REWRITE_MODE_ENVIRONMENT
+			      " value: '%s'", rewrite_mode_env);
+	}
+	if (rewrite_refs_env) {
+		c->refs_from_env = 1;
+		string_list_add_refs_from_colon_sep(c->refs, rewrite_refs_env);
+	}
+	git_config(notes_rewrite_config, c);
+	if (!c->enabled || !c->refs->nr) {
+		string_list_clear(c->refs, 0);
+		free(c->refs);
+		free(c);
+		return NULL;
+	}
+	c->trees = load_notes_trees(c->refs);
+	string_list_clear(c->refs, 0);
+	free(c->refs);
+	return c;
+}
+
+int copy_note_for_rewrite(struct notes_rewrite_cfg *c,
+			  const unsigned char *from_obj, const unsigned char *to_obj)
+{
+	int ret = 0;
+	int i;
+	for (i = 0; c->trees[i]; i++)
+		ret = copy_note(c->trees[i], from_obj, to_obj, 1, c->combine) || ret;
+	return ret;
+}
+
+void finish_copy_notes_for_rewrite(struct notes_rewrite_cfg *c)
+{
+	int i;
+	for (i = 0; c->trees[i]; i++) {
+		commit_notes(c->trees[i], "Notes added by 'git notes copy'");
+		free_notes(c->trees[i]);
+	}
+	free(c->trees);
+	free(c);
+}
+
+int notes_copy_from_stdin(int force, const char *rewrite_cmd)
+{
+	struct strbuf buf = STRBUF_INIT;
+	struct notes_rewrite_cfg *c = NULL;
+	struct notes_tree *t = NULL;
+	int ret = 0;
+
+	if (rewrite_cmd) {
+		c = init_copy_notes_for_rewrite(rewrite_cmd);
+		if (!c)
+			return 0;
+	} else {
+		init_notes(NULL, NULL, NULL, 0);
+		t = &default_notes_tree;
+	}
+
+	while (strbuf_getline(&buf, stdin, '\n') != EOF) {
+		unsigned char from_obj[20], to_obj[20];
+		struct strbuf **split;
+		int err;
+
+		split = strbuf_split(&buf, ' ');
+		if (!split[0] || !split[1])
+			die("Malformed input line: '%s'.", buf.buf);
+		strbuf_rtrim(split[0]);
+		strbuf_rtrim(split[1]);
+		if (get_sha1(split[0]->buf, from_obj))
+			die("Failed to resolve '%s' as a valid ref.", split[0]->buf);
+		if (get_sha1(split[1]->buf, to_obj))
+			die("Failed to resolve '%s' as a valid ref.", split[1]->buf);
+
+		if (rewrite_cmd)
+			err = copy_note_for_rewrite(c, from_obj, to_obj);
+		else
+			err = copy_note(t, from_obj, to_obj, force,
+					combine_notes_overwrite);
+
+		if (err) {
+			error("Failed to copy notes from '%s' to '%s'",
+			      split[0]->buf, split[1]->buf);
+			ret = 1;
+		}
+
+		strbuf_list_free(split);
+	}
+
+	if (!rewrite_cmd) {
+		commit_notes(t, "Notes added by 'git notes copy'");
+		free_notes(t);
+	} else {
+		finish_copy_notes_for_rewrite(c);
+	}
+	return ret;
+}
+
+static struct notes_tree *init_notes_check(const char *subcommand)
+{
+	struct notes_tree *t;
+	init_notes(NULL, NULL, NULL, 0);
+	t = &default_notes_tree;
+
+	if (prefixcmp(t->ref, "refs/notes/"))
+		die("Refusing to %s notes in %s (outside of refs/notes/)",
+		    subcommand, t->ref);
+	return t;
+}
+
+static int list(int argc, const char **argv, const char *prefix)
+{
+	struct notes_tree *t;
+	unsigned char object[20];
+	const unsigned char *note;
+	int retval = -1;
+	struct option options[] = {
+		OPT_END()
+	};
+
+	if (argc)
+		argc = parse_options(argc, argv, prefix, options,
+				     git_notes_list_usage, 0);
+
+	if (1 < argc) {
+		error("too many parameters");
+		usage_with_options(git_notes_list_usage, options);
+	}
+
+	t = init_notes_check("list");
+	if (argc) {
+		if (get_sha1(argv[0], object))
+			die("Failed to resolve '%s' as a valid ref.", argv[0]);
+		note = get_note(t, object);
+		if (note) {
+			puts(sha1_to_hex(note));
+			retval = 0;
+		} else
+			retval = error("No note found for object %s.",
+				       sha1_to_hex(object));
+	} else
+		retval = for_each_note(t, 0, list_each_note, NULL);
+
+	free_notes(t);
+	return retval;
+}
+
+static int add(int argc, const char **argv, const char *prefix)
+{
+	int retval = 0, force = 0;
+	const char *object_ref;
+	struct notes_tree *t;
+	unsigned char object[20], new_note[20];
+	char logmsg[100];
+	const unsigned char *note;
+	struct msg_arg msg = { 0, 0, STRBUF_INIT };
+	struct option options[] = {
+		{ OPTION_CALLBACK, 'm', "message", &msg, "MSG",
+			"note contents as a string", PARSE_OPT_NONEG,
+			parse_msg_arg},
+		{ OPTION_CALLBACK, 'F', "file", &msg, "FILE",
+			"note contents in a file", PARSE_OPT_NONEG,
+			parse_file_arg},
+		{ OPTION_CALLBACK, 'c', "reedit-message", &msg, "OBJECT",
+			"reuse and edit specified note object", PARSE_OPT_NONEG,
+			parse_reedit_arg},
+		{ OPTION_CALLBACK, 'C', "reuse-message", &msg, "OBJECT",
+			"reuse specified note object", PARSE_OPT_NONEG,
+			parse_reuse_arg},
+		OPT_BOOLEAN('f', "force", &force, "replace existing notes"),
+		OPT_END()
+	};
+
+	argc = parse_options(argc, argv, prefix, options, git_notes_add_usage,
+			     0);
+
+	if (1 < argc) {
+		error("too many parameters");
+		usage_with_options(git_notes_add_usage, options);
+	}
+
+	object_ref = argc ? argv[0] : "HEAD";
+
+	if (get_sha1(object_ref, object))
+		die("Failed to resolve '%s' as a valid ref.", object_ref);
+
+	t = init_notes_check("add");
+	note = get_note(t, object);
+
+	if (note) {
+		if (!force) {
+			retval = error("Cannot add notes. Found existing notes "
+				       "for object %s. Use '-f' to overwrite "
+				       "existing notes", sha1_to_hex(object));
+			goto out;
+		}
+		fprintf(stderr, "Overwriting existing notes for object %s\n",
+			sha1_to_hex(object));
+	}
+
+	create_note(object, &msg, 0, note, new_note);
+
+	if (is_null_sha1(new_note))
+		remove_note(t, object);
+	else
+		add_note(t, object, new_note, combine_notes_overwrite);
+
+	snprintf(logmsg, sizeof(logmsg), "Notes %s by 'git notes %s'",
+		 is_null_sha1(new_note) ? "removed" : "added", "add");
+	commit_notes(t, logmsg);
+out:
+	free_notes(t);
+	strbuf_release(&(msg.buf));
+	return retval;
+}
+
+static int copy(int argc, const char **argv, const char *prefix)
+{
+	int retval = 0, force = 0, from_stdin = 0;
+	const unsigned char *from_note, *note;
+	const char *object_ref;
+	unsigned char object[20], from_obj[20];
+	struct notes_tree *t;
+	const char *rewrite_cmd = NULL;
+	struct option options[] = {
+		OPT_BOOLEAN('f', "force", &force, "replace existing notes"),
+		OPT_BOOLEAN(0, "stdin", &from_stdin, "read objects from stdin"),
+		OPT_STRING(0, "for-rewrite", &rewrite_cmd, "command",
+			   "load rewriting config for <command> (implies "
+			   "--stdin)"),
+		OPT_END()
+	};
+
+	argc = parse_options(argc, argv, prefix, options, git_notes_copy_usage,
+			     0);
+
+	if (from_stdin || rewrite_cmd) {
+		if (argc) {
+			error("too many parameters");
+			usage_with_options(git_notes_copy_usage, options);
+		} else {
+			return notes_copy_from_stdin(force, rewrite_cmd);
+		}
+	}
+
+	if (2 < argc) {
+		error("too many parameters");
+		usage_with_options(git_notes_copy_usage, options);
+	}
+
+	if (get_sha1(argv[0], from_obj))
+		die("Failed to resolve '%s' as a valid ref.", argv[0]);
+
+	object_ref = 1 < argc ? argv[1] : "HEAD";
+
+	if (get_sha1(object_ref, object))
+		die("Failed to resolve '%s' as a valid ref.", object_ref);
+
+	t = init_notes_check("copy");
+	note = get_note(t, object);
+
+	if (note) {
+		if (!force) {
+			retval = error("Cannot copy notes. Found existing "
+				       "notes for object %s. Use '-f' to "
+				       "overwrite existing notes",
+				       sha1_to_hex(object));
+			goto out;
+		}
+		fprintf(stderr, "Overwriting existing notes for object %s\n",
+			sha1_to_hex(object));
+	}
+
+	from_note = get_note(t, from_obj);
+	if (!from_note) {
+		retval = error("Missing notes on source object %s. Cannot "
+			       "copy.", sha1_to_hex(from_obj));
+		goto out;
+	}
+
+	add_note(t, object, from_note, combine_notes_overwrite);
+	commit_notes(t, "Notes added by 'git notes copy'");
+out:
+	free_notes(t);
+	return retval;
+}
+
+static int append_edit(int argc, const char **argv, const char *prefix)
+{
+	const char *object_ref;
+	struct notes_tree *t;
+	unsigned char object[20], new_note[20];
+	const unsigned char *note;
+	char logmsg[100];
+	const char * const *usage;
+	struct msg_arg msg = { 0, 0, STRBUF_INIT };
+	struct option options[] = {
+		{ OPTION_CALLBACK, 'm', "message", &msg, "MSG",
+			"note contents as a string", PARSE_OPT_NONEG,
+			parse_msg_arg},
+		{ OPTION_CALLBACK, 'F', "file", &msg, "FILE",
+			"note contents in a file", PARSE_OPT_NONEG,
+			parse_file_arg},
+		{ OPTION_CALLBACK, 'c', "reedit-message", &msg, "OBJECT",
+			"reuse and edit specified note object", PARSE_OPT_NONEG,
+			parse_reedit_arg},
+		{ OPTION_CALLBACK, 'C', "reuse-message", &msg, "OBJECT",
+			"reuse specified note object", PARSE_OPT_NONEG,
+			parse_reuse_arg},
+		OPT_END()
+	};
+	int edit = !strcmp(argv[0], "edit");
+
+	usage = edit ? git_notes_edit_usage : git_notes_append_usage;
+	argc = parse_options(argc, argv, prefix, options, usage,
+			     PARSE_OPT_KEEP_ARGV0);
+
+	if (2 < argc) {
+		error("too many parameters");
+		usage_with_options(usage, options);
+	}
+
+	if (msg.given && edit)
+		fprintf(stderr, "The -m/-F/-c/-C options have been deprecated "
+			"for the 'edit' subcommand.\n"
+			"Please use 'git notes add -f -m/-F/-c/-C' instead.\n");
+
+	object_ref = 1 < argc ? argv[1] : "HEAD";
+
+	if (get_sha1(object_ref, object))
+		die("Failed to resolve '%s' as a valid ref.", object_ref);
+
+	t = init_notes_check(argv[0]);
+	note = get_note(t, object);
+
+	create_note(object, &msg, !edit, note, new_note);
+
+	if (is_null_sha1(new_note))
+		remove_note(t, object);
+	else
+		add_note(t, object, new_note, combine_notes_overwrite);
+
+	snprintf(logmsg, sizeof(logmsg), "Notes %s by 'git notes %s'",
+		 is_null_sha1(new_note) ? "removed" : "added", argv[0]);
+	commit_notes(t, logmsg);
+	free_notes(t);
+	strbuf_release(&(msg.buf));
+	return 0;
+}
+
+static int show(int argc, const char **argv, const char *prefix)
+{
+	const char *object_ref;
+	struct notes_tree *t;
+	unsigned char object[20];
+	const unsigned char *note;
+	int retval;
+	struct option options[] = {
+		OPT_END()
+	};
+
+	argc = parse_options(argc, argv, prefix, options, git_notes_show_usage,
+			     0);
+
+	if (1 < argc) {
+		error("too many parameters");
+		usage_with_options(git_notes_show_usage, options);
+	}
+
+	object_ref = argc ? argv[0] : "HEAD";
+
+	if (get_sha1(object_ref, object))
+		die("Failed to resolve '%s' as a valid ref.", object_ref);
+
+	t = init_notes_check("show");
+	note = get_note(t, object);
+
+	if (!note)
+		retval = error("No note found for object %s.",
+			       sha1_to_hex(object));
+	else {
+		const char *show_args[3] = {"show", sha1_to_hex(note), NULL};
+		retval = execv_git_cmd(show_args);
+	}
+	free_notes(t);
+	return retval;
+}
+
+static int remove_cmd(int argc, const char **argv, const char *prefix)
+{
+	struct option options[] = {
+		OPT_END()
+	};
+	const char *object_ref;
+	struct notes_tree *t;
+	unsigned char object[20];
+
+	argc = parse_options(argc, argv, prefix, options,
+			     git_notes_remove_usage, 0);
+
+	if (1 < argc) {
+		error("too many parameters");
+		usage_with_options(git_notes_remove_usage, options);
+	}
+
+	object_ref = argc ? argv[0] : "HEAD";
+
+	if (get_sha1(object_ref, object))
+		die("Failed to resolve '%s' as a valid ref.", object_ref);
+
+	t = init_notes_check("remove");
+
+	fprintf(stderr, "Removing note for object %s\n", sha1_to_hex(object));
+	remove_note(t, object);
+
+	commit_notes(t, "Notes removed by 'git notes remove'");
+	free_notes(t);
+	return 0;
+}
+
+static int prune(int argc, const char **argv, const char *prefix)
+{
+	struct notes_tree *t;
+	struct option options[] = {
+		OPT_END()
+	};
+
+	argc = parse_options(argc, argv, prefix, options, git_notes_prune_usage,
+			     0);
+
+	if (argc) {
+		error("too many parameters");
+		usage_with_options(git_notes_prune_usage, options);
+	}
+
+	t = init_notes_check("prune");
+
+	prune_notes(t);
+	commit_notes(t, "Notes removed by 'git notes prune'");
+	free_notes(t);
+	return 0;
+}
+
+int cmd_notes(int argc, const char **argv, const char *prefix)
+{
+	int result;
+	const char *override_notes_ref = NULL;
+	struct option options[] = {
+		OPT_STRING(0, "ref", &override_notes_ref, "notes_ref",
+			   "use notes from <notes_ref>"),
+		OPT_END()
+	};
+
+	git_config(git_default_config, NULL);
+	argc = parse_options(argc, argv, prefix, options, git_notes_usage,
+			     PARSE_OPT_STOP_AT_NON_OPTION);
+
+	if (override_notes_ref) {
+		struct strbuf sb = STRBUF_INIT;
+		if (!prefixcmp(override_notes_ref, "refs/notes/"))
+			/* we're happy */;
+		else if (!prefixcmp(override_notes_ref, "notes/"))
+			strbuf_addstr(&sb, "refs/");
+		else
+			strbuf_addstr(&sb, "refs/notes/");
+		strbuf_addstr(&sb, override_notes_ref);
+		setenv("GIT_NOTES_REF", sb.buf, 1);
+		strbuf_release(&sb);
+	}
+
+	if (argc < 1 || !strcmp(argv[0], "list"))
+		result = list(argc, argv, prefix);
+	else if (!strcmp(argv[0], "add"))
+		result = add(argc, argv, prefix);
+	else if (!strcmp(argv[0], "copy"))
+		result = copy(argc, argv, prefix);
+	else if (!strcmp(argv[0], "append") || !strcmp(argv[0], "edit"))
+		result = append_edit(argc, argv, prefix);
+	else if (!strcmp(argv[0], "show"))
+		result = show(argc, argv, prefix);
+	else if (!strcmp(argv[0], "remove"))
+		result = remove_cmd(argc, argv, prefix);
+	else if (!strcmp(argv[0], "prune"))
+		result = prune(argc, argv, prefix);
+	else {
+		result = error("Unknown subcommand: %s", argv[0]);
+		usage_with_options(git_notes_usage, options);
+	}
+
+	return result ? 1 : 0;
+}
diff --git a/builtin-pack-objects.c b/builtin/pack-objects.c
index 539e75d56f..214d7ef2b1 100644
--- a/builtin-pack-objects.c
+++ b/builtin/pack-objects.c
@@ -18,8 +18,8 @@
 #include "refs.h"
 
 #ifndef NO_PTHREADS
-#include "thread-utils.h"
 #include <pthread.h>
+#include "thread-utils.h"
 #endif
 
 static const char pack_usage[] =
@@ -155,33 +155,6 @@ static unsigned long do_compress(void **pptr, unsigned long size)
 }
 
 /*
- * The per-object header is a pretty dense thing, which is
- *  - first byte: low four bits are "size", then three bits of "type",
- *    and the high bit is "size continues".
- *  - each byte afterwards: low seven bits are size continuation,
- *    with the high bit being "size continues"
- */
-static int encode_header(enum object_type type, unsigned long size, unsigned char *hdr)
-{
-	int n = 1;
-	unsigned char c;
-
-	if (type < OBJ_COMMIT || type > OBJ_REF_DELTA)
-		die("bad type %d", type);
-
-	c = (type << 4) | (size & 15);
-	size >>= 4;
-	while (size) {
-		*hdr++ = c | 0x80;
-		c = size & 0x7f;
-		size >>= 7;
-		n++;
-	}
-	*hdr = c;
-	return n;
-}
-
-/*
  * we are going to reuse the existing object data as is.  make
  * sure it is not corrupt.
  */
@@ -321,7 +294,7 @@ static unsigned long write_object(struct sha1file *f,
 		 * The object header is a byte of 'type' followed by zero or
 		 * more bytes of length.
 		 */
-		hdrlen = encode_header(type, size, header);
+		hdrlen = encode_in_pack_object_header(type, size, header);
 
 		if (type == OBJ_OFS_DELTA) {
 			/*
@@ -372,7 +345,7 @@ static unsigned long write_object(struct sha1file *f,
 		if (entry->delta)
 			type = (allow_ofs_delta && entry->delta->idx.offset) ?
 				OBJ_OFS_DELTA : OBJ_REF_DELTA;
-		hdrlen = encode_header(type, entry->size, header);
+		hdrlen = encode_in_pack_object_header(type, entry->size, header);
 
 		offset = entry->in_pack_offset;
 		revidx = find_pack_revindex(p, offset);
@@ -1549,6 +1522,13 @@ static void find_deltas(struct object_entry **list, unsigned *list_size,
 
 #ifndef NO_PTHREADS
 
+static void try_to_free_from_threads(size_t size)
+{
+	read_lock();
+	release_pack_memory(size, -1);
+	read_unlock();
+}
+
 /*
  * The main thread waits on the condition that (at least) one of the workers
  * has stopped working (which is indicated in the .working member of
@@ -1579,14 +1559,16 @@ static pthread_cond_t progress_cond;
  */
 static void init_threaded_search(void)
 {
-	pthread_mutex_init(&read_mutex, NULL);
+	init_recursive_mutex(&read_mutex);
 	pthread_mutex_init(&cache_mutex, NULL);
 	pthread_mutex_init(&progress_mutex, NULL);
 	pthread_cond_init(&progress_cond, NULL);
+	set_try_to_free_routine(try_to_free_from_threads);
 }
 
 static void cleanup_threaded_search(void)
 {
+	set_try_to_free_routine(NULL);
 	pthread_cond_destroy(&progress_cond);
 	pthread_mutex_destroy(&read_mutex);
 	pthread_mutex_destroy(&cache_mutex);
diff --git a/builtin-pack-redundant.c b/builtin/pack-redundant.c
index 41e1615a28..41e1615a28 100644
--- a/builtin-pack-redundant.c
+++ b/builtin/pack-redundant.c
diff --git a/builtin-pack-refs.c b/builtin/pack-refs.c
index 091860b2e3..091860b2e3 100644
--- a/builtin-pack-refs.c
+++ b/builtin/pack-refs.c
diff --git a/builtin-patch-id.c b/builtin/patch-id.c
index af0911e4bd..af0911e4bd 100644
--- a/builtin-patch-id.c
+++ b/builtin/patch-id.c
diff --git a/builtin-prune-packed.c b/builtin/prune-packed.c
index f9463deec2..f9463deec2 100644
--- a/builtin-prune-packed.c
+++ b/builtin/prune-packed.c
diff --git a/builtin-prune.c b/builtin/prune.c
index 81f915ec31..81f915ec31 100644
--- a/builtin-prune.c
+++ b/builtin/prune.c
diff --git a/builtin-push.c b/builtin/push.c
index 9fc6931247..f4358b9d23 100644
--- a/builtin-push.c
+++ b/builtin/push.c
@@ -17,6 +17,8 @@ static const char * const push_usage[] = {
 static int thin;
 static int deleterefs;
 static const char *receivepack;
+static int verbosity;
+static int progress;
 
 static const char **refspec;
 static int refspec_nr;
@@ -105,13 +107,16 @@ static int push_with_options(struct transport *transport, int flags)
 {
 	int err;
 	int nonfastforward;
+
+	transport_set_verbosity(transport, verbosity, progress);
+
 	if (receivepack)
 		transport_set_option(transport,
 				     TRANS_OPT_RECEIVEPACK, receivepack);
 	if (thin)
 		transport_set_option(transport, TRANS_OPT_THIN, "yes");
 
-	if (flags & TRANSPORT_PUSH_VERBOSE)
+	if (verbosity > 0)
 		fprintf(stderr, "Pushing to %s\n", transport->url);
 	err = transport_push(transport, refspec_nr, refspec, flags,
 			     &nonfastforward);
@@ -124,9 +129,9 @@ static int push_with_options(struct transport *transport, int flags)
 		return 0;
 
 	if (nonfastforward && advice_push_nonfastforward) {
-		printf("To prevent you from losing history, non-fast-forward updates were rejected\n"
-		       "Merge the remote changes before pushing again.  See the 'Note about\n"
-		       "fast-forwards' section of 'git push --help' for details.\n");
+		fprintf(stderr, "To prevent you from losing history, non-fast-forward updates were rejected\n"
+				"Merge the remote changes before pushing again.  See the 'Note about\n"
+				"fast-forwards' section of 'git push --help' for details.\n");
 	}
 
 	return 1;
@@ -204,8 +209,7 @@ int cmd_push(int argc, const char **argv, const char *prefix)
 	int rc;
 	const char *repo = NULL;	/* default repository */
 	struct option options[] = {
-		OPT_BIT('q', "quiet", &flags, "be quiet", TRANSPORT_PUSH_QUIET),
-		OPT_BIT('v', "verbose", &flags, "be verbose", TRANSPORT_PUSH_VERBOSE),
+		OPT__VERBOSITY(&verbosity),
 		OPT_STRING( 0 , "repo", &repo, "repository", "repository"),
 		OPT_BIT( 0 , "all", &flags, "push all refs", TRANSPORT_PUSH_ALL),
 		OPT_BIT( 0 , "mirror", &flags, "mirror all refs",
@@ -220,6 +224,7 @@ int cmd_push(int argc, const char **argv, const char *prefix)
 		OPT_STRING( 0 , "exec", &receivepack, "receive-pack", "receive pack program"),
 		OPT_BIT('u', "set-upstream", &flags, "set upstream for git pull/status",
 			TRANSPORT_PUSH_SET_UPSTREAM),
+		OPT_BOOLEAN(0, "progress", &progress, "force progress reporting"),
 		OPT_END()
 	};
 
diff --git a/builtin-read-tree.c b/builtin/read-tree.c
index 8bdcab1138..8bdcab1138 100644
--- a/builtin-read-tree.c
+++ b/builtin/read-tree.c
diff --git a/builtin-receive-pack.c b/builtin/receive-pack.c
index 0559fcc871..0559fcc871 100644
--- a/builtin-receive-pack.c
+++ b/builtin/receive-pack.c
diff --git a/builtin-reflog.c b/builtin/reflog.c
index bd7880dc04..bd7880dc04 100644
--- a/builtin-reflog.c
+++ b/builtin/reflog.c
diff --git a/builtin-remote.c b/builtin/remote.c
index 277765b864..277765b864 100644
--- a/builtin-remote.c
+++ b/builtin/remote.c
diff --git a/builtin-replace.c b/builtin/replace.c
index fe3a647a36..fe3a647a36 100644
--- a/builtin-replace.c
+++ b/builtin/replace.c
diff --git a/builtin-rerere.c b/builtin/rerere.c
index 34f9acee91..0048f9ef7f 100644
--- a/builtin-rerere.c
+++ b/builtin/rerere.c
@@ -89,7 +89,7 @@ static int diff_two(const char *file1, const char *label1,
 	printf("--- a/%s\n+++ b/%s\n", label1, label2);
 	fflush(stdout);
 	memset(&xpp, 0, sizeof(xpp));
-	xpp.flags = XDF_NEED_MINIMAL;
+	xpp.flags = 0;
 	memset(&xecfg, 0, sizeof(xecfg));
 	xecfg.ctxlen = 3;
 	ecb.outf = outf;
diff --git a/builtin-reset.c b/builtin/reset.c
index a174a31610..1283068fd2 100644
--- a/builtin-reset.c
+++ b/builtin/reset.c
@@ -22,14 +22,16 @@
 #include "cache-tree.h"
 
 static const char * const git_reset_usage[] = {
-	"git reset [--mixed | --soft | --hard | --merge] [-q] [<commit>]",
+	"git reset [--mixed | --soft | --hard | --merge | --keep] [-q] [<commit>]",
 	"git reset [-q] <commit> [--] <paths>...",
 	"git reset --patch [<commit>] [--] [<paths>...]",
 	NULL
 };
 
-enum reset_type { MIXED, SOFT, HARD, MERGE, NONE };
-static const char *reset_type_names[] = { "mixed", "soft", "hard", "merge", NULL };
+enum reset_type { MIXED, SOFT, HARD, MERGE, KEEP, NONE };
+static const char *reset_type_names[] = {
+	"mixed", "soft", "hard", "merge", "keep", NULL
+};
 
 static char *args_to_str(const char **argv)
 {
@@ -72,6 +74,7 @@ static int reset_index_file(const unsigned char *sha1, int reset_type, int quiet
 	if (!quiet)
 		opts.verbose_update = 1;
 	switch (reset_type) {
+	case KEEP:
 	case MERGE:
 		opts.update = 1;
 		break;
@@ -86,6 +89,16 @@ static int reset_index_file(const unsigned char *sha1, int reset_type, int quiet
 
 	read_cache_unmerged();
 
+	if (reset_type == KEEP) {
+		unsigned char head_sha1[20];
+		if (get_sha1("HEAD", head_sha1))
+			return error("You do not have a valid HEAD.");
+		if (!fill_tree_descriptor(desc, head_sha1))
+			return error("Failed to find tree of HEAD.");
+		nr++;
+		opts.fn = twoway_merge;
+	}
+
 	if (!fill_tree_descriptor(desc + nr - 1, sha1))
 		return error("Failed to find tree of %s.", sha1_to_hex(sha1));
 	if (unpack_trees(nr, desc, &opts))
@@ -212,6 +225,14 @@ static void prepend_reflog_action(const char *action, char *buf, size_t size)
 		warning("Reflog action message too long: %.*s...", 50, buf);
 }
 
+static void die_if_unmerged_cache(int reset_type)
+{
+	if (is_merge() || read_cache() < 0 || unmerged_cache())
+		die("Cannot do a %s reset in the middle of a merge.",
+		    reset_type_names[reset_type]);
+
+}
+
 int cmd_reset(int argc, const char **argv, const char *prefix)
 {
 	int i = 0, reset_type = NONE, update_ref_status = 0, quiet = 0;
@@ -230,6 +251,8 @@ int cmd_reset(int argc, const char **argv, const char *prefix)
 				"reset HEAD, index and working tree", HARD),
 		OPT_SET_INT(0, "merge", &reset_type,
 				"reset HEAD, index and working tree", MERGE),
+		OPT_SET_INT(0, "keep", &reset_type,
+				"reset HEAD but keep local changes", KEEP),
 		OPT_BOOLEAN('p', "patch", &patch_mode, "select hunks interactively"),
 		OPT_END()
 	};
@@ -305,7 +328,7 @@ int cmd_reset(int argc, const char **argv, const char *prefix)
 	if (reset_type == NONE)
 		reset_type = MIXED; /* by default */
 
-	if (reset_type == HARD || reset_type == MERGE)
+	if (reset_type != SOFT && reset_type != MIXED)
 		setup_work_tree();
 
 	if (reset_type == MIXED && is_bare_repository())
@@ -315,12 +338,18 @@ int cmd_reset(int argc, const char **argv, const char *prefix)
 	/* Soft reset does not touch the index file nor the working tree
 	 * at all, but requires them in a good order.  Other resets reset
 	 * the index file to the tree object we are switching to. */
-	if (reset_type == SOFT) {
-		if (is_merge() || read_cache() < 0 || unmerged_cache())
-			die("Cannot do a soft reset in the middle of a merge.");
+	if (reset_type == SOFT)
+		die_if_unmerged_cache(reset_type);
+	else {
+		int err;
+		if (reset_type == KEEP)
+			die_if_unmerged_cache(reset_type);
+		err = reset_index_file(sha1, reset_type, quiet);
+		if (reset_type == KEEP)
+			err = err || reset_index_file(sha1, MIXED, quiet);
+		if (err)
+			die("Could not reset index file to revision '%s'.", rev);
 	}
-	else if (reset_index_file(sha1, reset_type, quiet))
-		die("Could not reset index file to revision '%s'.", rev);
 
 	/* Any resets update HEAD to the head being switched to,
 	 * saving the previous head in ORIG_HEAD before. */
diff --git a/builtin-rev-list.c b/builtin/rev-list.c
index 51ceb19d88..51ceb19d88 100644
--- a/builtin-rev-list.c
+++ b/builtin/rev-list.c
diff --git a/builtin-rev-parse.c b/builtin/rev-parse.c
index b76f205e62..8fbf9d0db6 100644
--- a/builtin-rev-parse.c
+++ b/builtin/rev-parse.c
@@ -644,6 +644,7 @@ int cmd_rev_parse(int argc, const char **argv, const char *prefix)
 			if (!strcmp(arg, "--git-dir")) {
 				const char *gitdir = getenv(GIT_DIR_ENVIRONMENT);
 				static char cwd[PATH_MAX];
+				int len;
 				if (gitdir) {
 					puts(gitdir);
 					continue;
@@ -654,7 +655,8 @@ int cmd_rev_parse(int argc, const char **argv, const char *prefix)
 				}
 				if (!getcwd(cwd, PATH_MAX))
 					die_errno("unable to get current working directory");
-				printf("%s/.git\n", cwd);
+				len = strlen(cwd);
+				printf("%s%s.git\n", cwd, len && cwd[len-1] != '/' ? "/" : "");
 				continue;
 			}
 			if (!strcmp(arg, "--is-inside-git-dir")) {
diff --git a/builtin-revert.c b/builtin/revert.c
index eff52687a8..7d68ef714e 100644
--- a/builtin-revert.c
+++ b/builtin/revert.c
@@ -13,6 +13,7 @@
 #include "revision.h"
 #include "rerere.h"
 #include "merge-recursive.h"
+#include "refs.h"
 
 /*
  * This implements the builtins revert and cherry-pick.
@@ -35,7 +36,7 @@ static const char * const cherry_pick_usage[] = {
 	NULL
 };
 
-static int edit, no_replay, no_commit, mainline, signoff;
+static int edit, no_replay, no_commit, mainline, signoff, allow_ff;
 static enum { REVERT, CHERRY_PICK } action;
 static struct commit *commit;
 static const char *commit_name;
@@ -45,6 +46,8 @@ static const char *me;
 
 #define GIT_REFLOG_ACTION "GIT_REFLOG_ACTION"
 
+static char *get_encoding(const char *message);
+
 static void parse_args(int argc, const char **argv)
 {
 	const char * const * usage_str =
@@ -60,8 +63,19 @@ static void parse_args(int argc, const char **argv)
 		OPT_INTEGER('m', "mainline", &mainline, "parent number"),
 		OPT_RERERE_AUTOUPDATE(&allow_rerere_auto),
 		OPT_END(),
+		OPT_END(),
+		OPT_END(),
 	};
 
+	if (action == CHERRY_PICK) {
+		struct option cp_extra[] = {
+			OPT_BOOLEAN(0, "ff", &allow_ff, "allow fast-forward"),
+			OPT_END(),
+		};
+		if (parse_options_concat(options, ARRAY_SIZE(options), cp_extra))
+			die("program error");
+	}
+
 	if (parse_options(argc, argv, NULL, options, usage_str, 0) != 1)
 		usage_with_options(usage_str, options);
 
@@ -73,33 +87,69 @@ static void parse_args(int argc, const char **argv)
 		exit(1);
 }
 
-static char *get_oneline(const char *message)
+struct commit_message {
+	char *parent_label;
+	const char *label;
+	const char *subject;
+	char *reencoded_message;
+	const char *message;
+};
+
+static int get_message(const char *raw_message, struct commit_message *out)
 {
-	char *result;
-	const char *p = message, *abbrev, *eol;
+	const char *encoding;
+	const char *p, *abbrev, *eol;
+	char *q;
 	int abbrev_len, oneline_len;
 
-	if (!p)
-		die ("Could not read commit message of %s",
-				sha1_to_hex(commit->object.sha1));
+	if (!raw_message)
+		return -1;
+	encoding = get_encoding(raw_message);
+	if (!encoding)
+		encoding = "UTF-8";
+	if (!git_commit_encoding)
+		git_commit_encoding = "UTF-8";
+
+	out->reencoded_message = NULL;
+	out->message = raw_message;
+	if (strcmp(encoding, git_commit_encoding))
+		out->reencoded_message = reencode_string(raw_message,
+					git_commit_encoding, encoding);
+	if (out->reencoded_message)
+		out->message = out->reencoded_message;
+
+	abbrev = find_unique_abbrev(commit->object.sha1, DEFAULT_ABBREV);
+	abbrev_len = strlen(abbrev);
+
+	/* Find beginning and end of commit subject. */
+	p = out->message;
 	while (*p && (*p != '\n' || p[1] != '\n'))
 		p++;
-
 	if (*p) {
 		p += 2;
 		for (eol = p + 1; *eol && *eol != '\n'; eol++)
 			; /* do nothing */
 	} else
 		eol = p;
-	abbrev = find_unique_abbrev(commit->object.sha1, DEFAULT_ABBREV);
-	abbrev_len = strlen(abbrev);
 	oneline_len = eol - p;
-	result = xmalloc(abbrev_len + 5 + oneline_len);
-	memcpy(result, abbrev, abbrev_len);
-	memcpy(result + abbrev_len, "... ", 4);
-	memcpy(result + abbrev_len + 4, p, oneline_len);
-	result[abbrev_len + 4 + oneline_len] = '\0';
-	return result;
+
+	out->parent_label = xmalloc(strlen("parent of ") + abbrev_len +
+			      strlen("... ") + oneline_len + 1);
+	q = out->parent_label;
+	q = mempcpy(q, "parent of ", strlen("parent of "));
+	out->label = q;
+	q = mempcpy(q, abbrev, abbrev_len);
+	q = mempcpy(q, "... ", strlen("... "));
+	out->subject = q;
+	q = mempcpy(q, p, oneline_len);
+	*q = '\0';
+	return 0;
+}
+
+static void free_message(struct commit_message *msg)
+{
+	free(msg->parent_label);
+	free(msg->reencoded_message);
 }
 
 static char *get_encoding(const char *message)
@@ -244,14 +294,25 @@ static NORETURN void die_dirty_index(const char *me)
 	}
 }
 
+static int fast_forward_to(const unsigned char *to, const unsigned char *from)
+{
+	struct ref_lock *ref_lock;
+
+	read_cache();
+	if (checkout_fast_forward(from, to))
+		exit(1); /* the callee should have complained already */
+	ref_lock = lock_any_ref_for_update("HEAD", from, 0);
+	return write_ref_sha1(ref_lock, to, "cherry-pick");
+}
+
 static int revert_or_cherry_pick(int argc, const char **argv)
 {
 	unsigned char head[20];
 	struct commit *base, *next, *parent;
+	const char *base_label, *next_label;
 	int i, index_fd, clean;
-	char *oneline, *reencoded_message = NULL;
-	const char *message, *encoding;
-	char *defmsg = git_pathdup("MERGE_MSG");
+	struct commit_message msg = { NULL, NULL, NULL, NULL, NULL };
+	char *defmsg = NULL;
 	struct merge_options o;
 	struct tree *result, *next_tree, *base_tree, *head_tree;
 	static struct lock_file index_lock;
@@ -265,6 +326,17 @@ static int revert_or_cherry_pick(int argc, const char **argv)
 	if (action == REVERT && !no_replay)
 		die("revert is incompatible with replay");
 
+	if (allow_ff) {
+		if (signoff)
+			die("cherry-pick --ff cannot be used with --signoff");
+		if (no_commit)
+			die("cherry-pick --ff cannot be used with --no-commit");
+		if (no_replay)
+			die("cherry-pick --ff cannot be used with -x");
+		if (edit)
+			die("cherry-pick --ff cannot be used with --edit");
+	}
+
 	if (read_cache() < 0)
 		die("git %s: failed to read the index", me);
 	if (no_commit) {
@@ -284,8 +356,6 @@ static int revert_or_cherry_pick(int argc, const char **argv)
 	}
 	discard_cache();
 
-	index_fd = hold_locked_index(&index_lock, 1);
-
 	if (!commit->parents) {
 		if (action == REVERT)
 			die ("Cannot revert a root commit");
@@ -314,14 +384,17 @@ static int revert_or_cherry_pick(int argc, const char **argv)
 	else
 		parent = commit->parents->item;
 
-	if (!(message = commit->buffer))
-		die ("Cannot get commit message for %s",
-				sha1_to_hex(commit->object.sha1));
+	if (allow_ff && !hashcmp(parent->object.sha1, head))
+		return fast_forward_to(commit->object.sha1, head);
 
 	if (parent && parse_commit(parent) < 0)
 		die("%s: cannot parse parent commit %s",
 		    me, sha1_to_hex(parent->object.sha1));
 
+	if (get_message(commit->buffer, &msg) != 0)
+		die("Cannot get commit message for %s",
+				sha1_to_hex(commit->object.sha1));
+
 	/*
 	 * "commit" is an existing commit.  We would want to apply
 	 * the difference it introduces since its first parent "prev"
@@ -329,27 +402,19 @@ static int revert_or_cherry_pick(int argc, const char **argv)
 	 * reverse of it if we are revert.
 	 */
 
+	defmsg = git_pathdup("MERGE_MSG");
 	msg_fd = hold_lock_file_for_update(&msg_file, defmsg,
 					   LOCK_DIE_ON_ERROR);
 
-	encoding = get_encoding(message);
-	if (!encoding)
-		encoding = "UTF-8";
-	if (!git_commit_encoding)
-		git_commit_encoding = "UTF-8";
-	if ((reencoded_message = reencode_string(message,
-					git_commit_encoding, encoding)))
-		message = reencoded_message;
-
-	oneline = get_oneline(message);
+	index_fd = hold_locked_index(&index_lock, 1);
 
 	if (action == REVERT) {
-		char *oneline_body = strchr(oneline, ' ');
-
 		base = commit;
+		base_label = msg.label;
 		next = parent;
+		next_label = msg.parent_label;
 		add_to_msg("Revert \"");
-		add_to_msg(oneline_body + 1);
+		add_to_msg(msg.subject);
 		add_to_msg("\"\n\nThis reverts commit ");
 		add_to_msg(sha1_to_hex(commit->object.sha1));
 
@@ -360,9 +425,11 @@ static int revert_or_cherry_pick(int argc, const char **argv)
 		add_to_msg(".\n");
 	} else {
 		base = parent;
+		base_label = msg.parent_label;
 		next = commit;
-		set_author_ident_env(message);
-		add_message_to_msg(message);
+		next_label = msg.label;
+		set_author_ident_env(msg.message);
+		add_message_to_msg(msg.message);
 		if (no_replay) {
 			add_to_msg("(cherry picked from commit ");
 			add_to_msg(sha1_to_hex(commit->object.sha1));
@@ -372,8 +439,9 @@ static int revert_or_cherry_pick(int argc, const char **argv)
 
 	read_cache();
 	init_merge_options(&o);
+	o.ancestor = base ? base_label : "(empty tree)";
 	o.branch1 = "HEAD";
-	o.branch2 = oneline;
+	o.branch2 = next ? next_label : "(empty tree)";
 
 	head_tree = parse_tree_indirect(head);
 	next_tree = next ? next->tree : empty_tree();
@@ -437,7 +505,7 @@ static int revert_or_cherry_pick(int argc, const char **argv)
 		args[i] = NULL;
 		return execv_git_cmd(args);
 	}
-	free(reencoded_message);
+	free_message(&msg);
 	free(defmsg);
 
 	return 0;
diff --git a/builtin-rm.c b/builtin/rm.c
index f3772c84de..f3772c84de 100644
--- a/builtin-rm.c
+++ b/builtin/rm.c
diff --git a/builtin-send-pack.c b/builtin/send-pack.c
index 2183a47052..481602d8ae 100644
--- a/builtin-send-pack.c
+++ b/builtin/send-pack.c
@@ -7,6 +7,7 @@
 #include "remote.h"
 #include "send-pack.h"
 #include "quote.h"
+#include "transport.h"
 
 static const char send_pack_usage[] =
 "git send-pack [--all | --mirror] [--dry-run] [--force] [--receive-pack=<git-receive-pack>] [--verbose] [--thin] [<host>:]<directory> [<ref>...]\n"
@@ -169,156 +170,6 @@ static int receive_status(int in, struct ref *refs)
 	return ret;
 }
 
-static void update_tracking_ref(struct remote *remote, struct ref *ref)
-{
-	struct refspec rs;
-
-	if (ref->status != REF_STATUS_OK && ref->status != REF_STATUS_UPTODATE)
-		return;
-
-	rs.src = ref->name;
-	rs.dst = NULL;
-
-	if (!remote_find_tracking(remote, &rs)) {
-		if (args.verbose)
-			fprintf(stderr, "updating local tracking ref '%s'\n", rs.dst);
-		if (ref->deletion) {
-			delete_ref(rs.dst, NULL, 0);
-		} else
-			update_ref("update by push", rs.dst,
-					ref->new_sha1, NULL, 0, 0);
-		free(rs.dst);
-	}
-}
-
-#define SUMMARY_WIDTH (2 * DEFAULT_ABBREV + 3)
-
-static void print_ref_status(char flag, const char *summary, struct ref *to, struct ref *from, const char *msg)
-{
-	fprintf(stderr, " %c %-*s ", flag, SUMMARY_WIDTH, summary);
-	if (from)
-		fprintf(stderr, "%s -> %s", prettify_refname(from->name), prettify_refname(to->name));
-	else
-		fputs(prettify_refname(to->name), stderr);
-	if (msg) {
-		fputs(" (", stderr);
-		fputs(msg, stderr);
-		fputc(')', stderr);
-	}
-	fputc('\n', stderr);
-}
-
-static const char *status_abbrev(unsigned char sha1[20])
-{
-	return find_unique_abbrev(sha1, DEFAULT_ABBREV);
-}
-
-static void print_ok_ref_status(struct ref *ref)
-{
-	if (ref->deletion)
-		print_ref_status('-', "[deleted]", ref, NULL, NULL);
-	else if (is_null_sha1(ref->old_sha1))
-		print_ref_status('*',
-			(!prefixcmp(ref->name, "refs/tags/") ? "[new tag]" :
-			  "[new branch]"),
-			ref, ref->peer_ref, NULL);
-	else {
-		char quickref[84];
-		char type;
-		const char *msg;
-
-		strcpy(quickref, status_abbrev(ref->old_sha1));
-		if (ref->nonfastforward) {
-			strcat(quickref, "...");
-			type = '+';
-			msg = "forced update";
-		} else {
-			strcat(quickref, "..");
-			type = ' ';
-			msg = NULL;
-		}
-		strcat(quickref, status_abbrev(ref->new_sha1));
-
-		print_ref_status(type, quickref, ref, ref->peer_ref, msg);
-	}
-}
-
-static int print_one_push_status(struct ref *ref, const char *dest, int count)
-{
-	if (!count)
-		fprintf(stderr, "To %s\n", dest);
-
-	switch(ref->status) {
-	case REF_STATUS_NONE:
-		print_ref_status('X', "[no match]", ref, NULL, NULL);
-		break;
-	case REF_STATUS_REJECT_NODELETE:
-		print_ref_status('!', "[rejected]", ref, NULL,
-				"remote does not support deleting refs");
-		break;
-	case REF_STATUS_UPTODATE:
-		print_ref_status('=', "[up to date]", ref,
-				ref->peer_ref, NULL);
-		break;
-	case REF_STATUS_REJECT_NONFASTFORWARD:
-		print_ref_status('!', "[rejected]", ref, ref->peer_ref,
-				"non-fast-forward");
-		break;
-	case REF_STATUS_REMOTE_REJECT:
-		print_ref_status('!', "[remote rejected]", ref,
-				ref->deletion ? NULL : ref->peer_ref,
-				ref->remote_status);
-		break;
-	case REF_STATUS_EXPECTING_REPORT:
-		print_ref_status('!', "[remote failure]", ref,
-				ref->deletion ? NULL : ref->peer_ref,
-				"remote failed to report status");
-		break;
-	case REF_STATUS_OK:
-		print_ok_ref_status(ref);
-		break;
-	}
-
-	return 1;
-}
-
-static void print_push_status(const char *dest, struct ref *refs)
-{
-	struct ref *ref;
-	int n = 0;
-
-	if (args.verbose) {
-		for (ref = refs; ref; ref = ref->next)
-			if (ref->status == REF_STATUS_UPTODATE)
-				n += print_one_push_status(ref, dest, n);
-	}
-
-	for (ref = refs; ref; ref = ref->next)
-		if (ref->status == REF_STATUS_OK)
-			n += print_one_push_status(ref, dest, n);
-
-	for (ref = refs; ref; ref = ref->next) {
-		if (ref->status != REF_STATUS_NONE &&
-		    ref->status != REF_STATUS_UPTODATE &&
-		    ref->status != REF_STATUS_OK)
-			n += print_one_push_status(ref, dest, n);
-	}
-}
-
-static int refs_pushed(struct ref *ref)
-{
-	for (; ref; ref = ref->next) {
-		switch(ref->status) {
-		case REF_STATUS_NONE:
-		case REF_STATUS_UPTODATE:
-			break;
-		default:
-			return 1;
-		}
-	}
-	return 0;
-}
-
 static void print_helper_status(struct ref *ref)
 {
 	struct strbuf buf = STRBUF_INIT;
@@ -510,6 +361,10 @@ int send_pack(struct send_pack_args *args,
 
 	if (ret < 0)
 		return ret;
+
+	if (args->porcelain)
+		return 0;
+
 	for (ref = remote_refs; ref; ref = ref->next) {
 		switch (ref->status) {
 		case REF_STATUS_NONE:
@@ -523,37 +378,6 @@ int send_pack(struct send_pack_args *args,
 	return 0;
 }
 
-static void verify_remote_names(int nr_heads, const char **heads)
-{
-	int i;
-
-	for (i = 0; i < nr_heads; i++) {
-		const char *local = heads[i];
-		const char *remote = strrchr(heads[i], ':');
-
-		if (*local == '+')
-			local++;
-
-		/* A matching refspec is okay.  */
-		if (remote == local && remote[1] == '\0')
-			continue;
-
-		remote = remote ? (remote + 1) : local;
-		switch (check_ref_format(remote)) {
-		case 0: /* ok */
-		case CHECK_REF_FORMAT_ONELEVEL:
-			/* ok but a single level -- that is fine for
-			 * a match pattern.
-			 */
-		case CHECK_REF_FORMAT_WILDCARD:
-			/* ok but ends with a pattern-match character */
-			continue;
-		}
-		die("remote part of refspec is not a valid name in %s",
-		    heads[i]);
-	}
-}
-
 int cmd_send_pack(int argc, const char **argv, const char *prefix)
 {
 	int i, nr_refspecs = 0;
@@ -570,6 +394,7 @@ int cmd_send_pack(int argc, const char **argv, const char *prefix)
 	int send_all = 0;
 	const char *receivepack = "git-receive-pack";
 	int flags;
+	int nonfastforward = 0;
 
 	argv++;
 	for (i = 1; i < argc; i++, argv++) {
@@ -662,7 +487,7 @@ int cmd_send_pack(int argc, const char **argv, const char *prefix)
 	get_remote_heads(fd[0], &remote_refs, 0, NULL, REF_NORMAL,
 			 &extra_have);
 
-	verify_remote_names(nr_refspecs, refspecs);
+	transport_verify_remote_names(nr_refspecs, refspecs);
 
 	local_refs = get_local_heads();
 
@@ -691,15 +516,15 @@ int cmd_send_pack(int argc, const char **argv, const char *prefix)
 	ret |= finish_connect(conn);
 
 	if (!helper_status)
-		print_push_status(dest, remote_refs);
+		transport_print_push_status(dest, remote_refs, args.verbose, 0, &nonfastforward);
 
 	if (!args.dry_run && remote) {
 		struct ref *ref;
 		for (ref = remote_refs; ref; ref = ref->next)
-			update_tracking_ref(remote, ref);
+			transport_update_tracking_ref(remote, ref, args.verbose);
 	}
 
-	if (!ret && !refs_pushed(remote_refs))
+	if (!ret && !transport_refs_pushed(remote_refs))
 		fprintf(stderr, "Everything up-to-date\n");
 
 	return ret;
diff --git a/builtin-shortlog.c b/builtin/shortlog.c
index 6f36362818..5089502800 100644
--- a/builtin-shortlog.c
+++ b/builtin/shortlog.c
@@ -296,6 +296,8 @@ parse_done:
 	if (!nongit && !rev.pending.nr && isatty(0))
 		add_head_to_pending(&rev);
 	if (rev.pending.nr == 0) {
+		if (isatty(0))
+			fprintf(stderr, "(reading log message from standard input)\n");
 		read_from_stdin(&log);
 	}
 	else
diff --git a/builtin-show-branch.c b/builtin/show-branch.c
index 35a709e630..e8719aa9e9 100644
--- a/builtin-show-branch.c
+++ b/builtin/show-branch.c
@@ -6,7 +6,7 @@
 #include "parse-options.h"
 
 static const char* show_branch_usage[] = {
-    "git show-branch [-a|--all] [-r|--remotes] [--topo-order | --date-order] [--current] [--color | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]...",
+    "git show-branch [-a|--all] [-r|--remotes] [--topo-order | --date-order] [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]...",
     "git show-branch (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>]",
     NULL
 };
@@ -313,7 +313,8 @@ static void show_one_commit(struct commit *commit, int no_name)
 		}
 		else
 			printf("[%s] ",
-			       find_unique_abbrev(commit->object.sha1, 7));
+			       find_unique_abbrev(commit->object.sha1,
+						  DEFAULT_ABBREV));
 	}
 	puts(pretty_str);
 	strbuf_release(&pretty);
@@ -661,7 +662,7 @@ int cmd_show_branch(int ac, const char **av, const char *prefix)
 			    "show remote-tracking and local branches"),
 		OPT_BOOLEAN('r', "remotes", &all_remotes,
 			    "show remote-tracking branches"),
-		OPT_BOOLEAN(0, "color", &showbranch_use_color,
+		OPT__COLOR(&showbranch_use_color,
 			    "color '*!+-' corresponding to the branch"),
 		{ OPTION_INTEGER, 0, "more", &extra, "n",
 			    "show <n> more commits after the common ancestor",
diff --git a/builtin-show-ref.c b/builtin/show-ref.c
index 17ada88dfb..17ada88dfb 100644
--- a/builtin-show-ref.c
+++ b/builtin/show-ref.c
diff --git a/builtin-stripspace.c b/builtin/stripspace.c
index 4d3b93fedb..4d3b93fedb 100644
--- a/builtin-stripspace.c
+++ b/builtin/stripspace.c
diff --git a/builtin-symbolic-ref.c b/builtin/symbolic-ref.c
index ca855a5eb2..ca855a5eb2 100644
--- a/builtin-symbolic-ref.c
+++ b/builtin/symbolic-ref.c
diff --git a/builtin-tag.c b/builtin/tag.c
index 4ef1c4f508..d311491e49 100644
--- a/builtin-tag.c
+++ b/builtin/tag.c
@@ -147,11 +147,11 @@ static int delete_tag(const char *name, const char *ref,
 static int verify_tag(const char *name, const char *ref,
 				const unsigned char *sha1)
 {
-	const char *argv_verify_tag[] = {"git-verify-tag",
+	const char *argv_verify_tag[] = {"verify-tag",
 					"-v", "SHA1_HEX", NULL};
 	argv_verify_tag[2] = sha1_to_hex(sha1);
 
-	if (run_command_v_opt(argv_verify_tag, 0))
+	if (run_command_v_opt(argv_verify_tag, RUN_GIT_CMD))
 		return error("could not verify the tag '%s'", name);
 	return 0;
 }
diff --git a/builtin-tar-tree.c b/builtin/tar-tree.c
index 3f1e7012db..3f1e7012db 100644
--- a/builtin-tar-tree.c
+++ b/builtin/tar-tree.c
diff --git a/builtin-unpack-file.c b/builtin/unpack-file.c
index 608590ada8..608590ada8 100644
--- a/builtin-unpack-file.c
+++ b/builtin/unpack-file.c
diff --git a/builtin-unpack-objects.c b/builtin/unpack-objects.c
index 685566e0b5..685566e0b5 100644
--- a/builtin-unpack-objects.c
+++ b/builtin/unpack-objects.c
diff --git a/builtin-update-index.c b/builtin/update-index.c
index 3ab214d24e..3ab214d24e 100644
--- a/builtin-update-index.c
+++ b/builtin/update-index.c
diff --git a/builtin-update-ref.c b/builtin/update-ref.c
index 76ba1d5881..76ba1d5881 100644
--- a/builtin-update-ref.c
+++ b/builtin/update-ref.c
diff --git a/builtin-update-server-info.c b/builtin/update-server-info.c
index 2b3fddcc69..2b3fddcc69 100644
--- a/builtin-update-server-info.c
+++ b/builtin/update-server-info.c
diff --git a/builtin-upload-archive.c b/builtin/upload-archive.c
index 73f788ef24..73f788ef24 100644
--- a/builtin-upload-archive.c
+++ b/builtin/upload-archive.c
diff --git a/builtin-var.c b/builtin/var.c
index 70fdb4dec7..70fdb4dec7 100644
--- a/builtin-var.c
+++ b/builtin/var.c
diff --git a/builtin-verify-pack.c b/builtin/verify-pack.c
index b6079ae6cb..b6079ae6cb 100644
--- a/builtin-verify-pack.c
+++ b/builtin/verify-pack.c
diff --git a/builtin-verify-tag.c b/builtin/verify-tag.c
index 9f482c29f5..9f482c29f5 100644
--- a/builtin-verify-tag.c
+++ b/builtin/verify-tag.c
diff --git a/builtin-write-tree.c b/builtin/write-tree.c
index b223af416f..b223af416f 100644
--- a/builtin-write-tree.c
+++ b/builtin/write-tree.c
diff --git a/cache.h b/cache.h
index 6e54993256..0d101e4913 100644
--- a/cache.h
+++ b/cache.h
@@ -387,6 +387,9 @@ static inline enum object_type object_type(unsigned int mode)
 #define ATTRIBUTE_MACRO_PREFIX "[attr]"
 #define GIT_NOTES_REF_ENVIRONMENT "GIT_NOTES_REF"
 #define GIT_NOTES_DEFAULT_REF "refs/notes/commits"
+#define GIT_NOTES_DISPLAY_REF_ENVIRONMENT "GIT_NOTES_DISPLAY_REF"
+#define GIT_NOTES_REWRITE_REF_ENVIRONMENT "GIT_NOTES_REWRITE_REF"
+#define GIT_NOTES_REWRITE_MODE_ENVIRONMENT "GIT_NOTES_REWRITE_MODE"
 
 /*
  * Repository-local GIT_* environment variables
@@ -688,6 +691,7 @@ int normalize_path_copy(char *dst, const char *src);
 int longest_ancestor_length(const char *path, const char *prefix_list);
 char *strip_path_suffix(const char *path, const char *suffix);
 int daemon_avoid_alias(const char *path);
+int offset_1st_component(const char *path);
 
 /* Read and unpack a sha1 file into memory, write memory to a sha1 file */
 extern int sha1_object_info(const unsigned char *, unsigned long *);
@@ -697,7 +701,7 @@ static inline void *read_sha1_file(const unsigned char *sha1, enum object_type *
 	return read_sha1_file_repl(sha1, type, size, NULL);
 }
 extern int hash_sha1_file(const void *buf, unsigned long len, const char *type, unsigned char *sha1);
-extern int write_sha1_file(void *buf, unsigned long len, const char *type, unsigned char *return_sha1);
+extern int write_sha1_file(const void *buf, unsigned long len, const char *type, unsigned char *return_sha1);
 extern int pretend_sha1_file(void *, unsigned long, enum object_type, unsigned char *);
 extern int force_object_loose(const unsigned char *sha1, time_t mtime);
 
@@ -890,6 +894,7 @@ struct ref {
 extern struct ref *find_ref_by_name(const struct ref *list, const char *name);
 
 #define CONNECT_VERBOSE       (1u << 0)
+extern char *git_getpass(const char *prompt);
 extern struct child_process *git_connect(int fd[2], const char *url, const char *prog, int flags);
 extern int finish_connect(struct child_process *conn);
 extern int path_match(const char *path, int nr, char **match);
@@ -900,7 +905,7 @@ struct extra_have_objects {
 extern struct ref **get_remote_heads(int in, struct ref **list, int nr_match, char **match, unsigned int flags, struct extra_have_objects *);
 extern int server_supports(const char *feature);
 
-extern struct packed_git *parse_pack_index(unsigned char *sha1);
+extern struct packed_git *parse_pack_index(unsigned char *sha1, const char *idx_path);
 
 extern void prepare_packed_git(void);
 extern void reprepare_packed_git(void);
@@ -911,6 +916,7 @@ extern struct packed_git *find_sha1_pack(const unsigned char *sha1,
 
 extern void pack_report(void);
 extern int open_pack_index(struct packed_git *);
+extern void close_pack_index(struct packed_git *);
 extern unsigned char *use_pack(struct packed_git *, struct pack_window **, off_t, unsigned int *);
 extern void close_pack_windows(struct packed_git *);
 extern void unuse_pack(struct pack_window **);
@@ -1053,4 +1059,7 @@ void overlay_tree_on_cache(const char *tree_name, const char *prefix);
 char *alias_lookup(const char *alias);
 int split_cmdline(char *cmdline, const char ***argv);
 
+/* builtin/merge.c */
+int checkout_fast_forward(const unsigned char *from, const unsigned char *to);
+
 #endif /* CACHE_H */
diff --git a/color.c b/color.c
index e8bcac0a79..bcf4e2c192 100644
--- a/color.c
+++ b/color.c
@@ -146,6 +146,9 @@ int git_config_colorbool(const char *var, const char *value, int stdout_is_tty)
 			goto auto_color;
 	}
 
+	if (!var)
+		return -1;
+
 	/* Missing or explicit false to turn off colorization */
 	if (!git_config_bool(var, value))
 		return 0;
diff --git a/color.h b/color.h
index bcb28cf10f..5c264b0ce3 100644
--- a/color.h
+++ b/color.h
@@ -30,7 +30,18 @@
 #define GIT_COLOR_BLUE		"\033[34m"
 #define GIT_COLOR_MAGENTA	"\033[35m"
 #define GIT_COLOR_CYAN		"\033[36m"
+#define GIT_COLOR_BOLD_RED	"\033[1;31m"
+#define GIT_COLOR_BOLD_GREEN	"\033[1;32m"
+#define GIT_COLOR_BOLD_YELLOW	"\033[1;33m"
+#define GIT_COLOR_BOLD_BLUE	"\033[1;34m"
+#define GIT_COLOR_BOLD_MAGENTA	"\033[1;35m"
+#define GIT_COLOR_BOLD_CYAN	"\033[1;36m"
 #define GIT_COLOR_BG_RED	"\033[41m"
+#define GIT_COLOR_BG_GREEN	"\033[42m"
+#define GIT_COLOR_BG_YELLOW	"\033[43m"
+#define GIT_COLOR_BG_BLUE	"\033[44m"
+#define GIT_COLOR_BG_MAGENTA	"\033[45m"
+#define GIT_COLOR_BG_CYAN	"\033[46m"
 
 /*
  * This variable stores the value of color.ui
diff --git a/combine-diff.c b/combine-diff.c
index 3480dae824..655fa89d8a 100644
--- a/combine-diff.c
+++ b/combine-diff.c
@@ -211,7 +211,6 @@ static void combine_diff(const unsigned char *parent, unsigned int mode,
 	xpparam_t xpp;
 	xdemitconf_t xecfg;
 	mmfile_t parent_file;
-	xdemitcb_t ecb;
 	struct combine_diff_state state;
 	unsigned long sz;
 
@@ -221,7 +220,7 @@ static void combine_diff(const unsigned char *parent, unsigned int mode,
 	parent_file.ptr = grab_blob(parent, mode, &sz);
 	parent_file.size = sz;
 	memset(&xpp, 0, sizeof(xpp));
-	xpp.flags = XDF_NEED_MINIMAL;
+	xpp.flags = 0;
 	memset(&xecfg, 0, sizeof(xecfg));
 	memset(&state, 0, sizeof(state));
 	state.nmask = nmask;
@@ -231,7 +230,7 @@ static void combine_diff(const unsigned char *parent, unsigned int mode,
 	state.n = n;
 
 	xdi_diff_outf(&parent_file, result_file, consume_line, &state,
-		      &xpp, &xecfg, &ecb);
+		      &xpp, &xecfg);
 	free(parent_file.ptr);
 
 	/* Assign line numbers for this parent.
diff --git a/commit.h b/commit.h
index 3cf5166581..26ec8c0d1c 100644
--- a/commit.h
+++ b/commit.h
@@ -74,11 +74,16 @@ struct pretty_print_context
 	struct reflog_walk_info *reflog_info;
 };
 
+struct userformat_want {
+	unsigned notes:1;
+};
+
 extern int has_non_ascii(const char *text);
 struct rev_info; /* in revision.h, it circularly uses enum cmit_fmt */
 extern char *reencode_commit_message(const struct commit *commit,
 				     const char **encoding_p);
 extern void get_commit_format(const char *arg, struct rev_info *);
+extern void userformat_find_requirements(const char *fmt, struct userformat_want *w);
 extern void format_commit_message(const struct commit *commit,
 				  const char *format, struct strbuf *sb,
 				  const struct pretty_print_context *context);
diff --git a/compat/mingw.c b/compat/mingw.c
index 59b18dc7ca..9a8e336582 100644
--- a/compat/mingw.c
+++ b/compat/mingw.c
@@ -140,6 +140,39 @@ int mingw_open (const char *filename, int oflags, ...)
 	return fd;
 }
 
+#undef write
+ssize_t mingw_write(int fd, const void *buf, size_t count)
+{
+	/*
+	 * While write() calls to a file on a local disk are translated
+	 * into WriteFile() calls with a maximum size of 64KB on Windows
+	 * XP and 256KB on Vista, no such cap is placed on writes to
+	 * files over the network on Windows XP.  Unfortunately, there
+	 * seems to be a limit of 32MB-28KB on X64 and 64MB-32KB on x86;
+	 * bigger writes fail on Windows XP.
+	 * So we cap to a nice 31MB here to avoid write failures over
+	 * the net without changing the number of WriteFile() calls in
+	 * the local case.
+	 */
+	return write(fd, buf, min(count, 31 * 1024 * 1024));
+}
+
+#undef fopen
+FILE *mingw_fopen (const char *filename, const char *otype)
+{
+	if (!strcmp(filename, "/dev/null"))
+		filename = "nul";
+	return fopen(filename, otype);
+}
+
+#undef freopen
+FILE *mingw_freopen (const char *filename, const char *otype, FILE *stream)
+{
+	if (filename && !strcmp(filename, "/dev/null"))
+		filename = "nul";
+	return freopen(filename, otype, stream);
+}
+
 /*
  * The unit of FILETIME is 100-nanoseconds since January 1, 1601, UTC.
  * Returns the 100-nanoseconds ("hekto nanoseconds") since the epoch.
@@ -634,6 +667,7 @@ static int env_compare(const void *a, const void *b)
 }
 
 static pid_t mingw_spawnve_fd(const char *cmd, const char **argv, char **env,
+			      const char *dir,
 			      int prepend_cmd, int fhin, int fhout, int fherr)
 {
 	STARTUPINFO si;
@@ -713,7 +747,7 @@ static pid_t mingw_spawnve_fd(const char *cmd, const char **argv, char **env,
 
 	memset(&pi, 0, sizeof(pi));
 	ret = CreateProcess(cmd, args.buf, NULL, NULL, TRUE, flags,
-		env ? envblk.buf : NULL, NULL, &si, &pi);
+		env ? envblk.buf : NULL, dir, &si, &pi);
 
 	if (env)
 		strbuf_release(&envblk);
@@ -730,10 +764,11 @@ static pid_t mingw_spawnve_fd(const char *cmd, const char **argv, char **env,
 static pid_t mingw_spawnve(const char *cmd, const char **argv, char **env,
 			   int prepend_cmd)
 {
-	return mingw_spawnve_fd(cmd, argv, env, prepend_cmd, 0, 1, 2);
+	return mingw_spawnve_fd(cmd, argv, env, NULL, prepend_cmd, 0, 1, 2);
 }
 
 pid_t mingw_spawnvpe(const char *cmd, const char **argv, char **env,
+		     const char *dir,
 		     int fhin, int fhout, int fherr)
 {
 	pid_t pid;
@@ -756,14 +791,14 @@ pid_t mingw_spawnvpe(const char *cmd, const char **argv, char **env,
 				pid = -1;
 			}
 			else {
-				pid = mingw_spawnve_fd(iprog, argv, env, 1,
+				pid = mingw_spawnve_fd(iprog, argv, env, dir, 1,
 						       fhin, fhout, fherr);
 				free(iprog);
 			}
 			argv[0] = argv0;
 		}
 		else
-			pid = mingw_spawnve_fd(prog, argv, env, 0,
+			pid = mingw_spawnve_fd(prog, argv, env, dir, 0,
 					       fhin, fhout, fherr);
 		free(prog);
 	}
diff --git a/compat/mingw.h b/compat/mingw.h
index e254fb4e06..0e3e743041 100644
--- a/compat/mingw.h
+++ b/compat/mingw.h
@@ -170,6 +170,15 @@ int link(const char *oldpath, const char *newpath);
 int mingw_open (const char *filename, int oflags, ...);
 #define open mingw_open
 
+ssize_t mingw_write(int fd, const void *buf, size_t count);
+#define write mingw_write
+
+FILE *mingw_fopen (const char *filename, const char *otype);
+#define fopen mingw_fopen
+
+FILE *mingw_freopen (const char *filename, const char *otype, FILE *stream);
+#define freopen mingw_freopen
+
 char *mingw_getcwd(char *pointer, int len);
 #define getcwd mingw_getcwd
 
@@ -223,6 +232,7 @@ int mingw_utime(const char *file_name, const struct utimbuf *times);
 #define utime mingw_utime
 
 pid_t mingw_spawnvpe(const char *cmd, const char **argv, char **env,
+		     const char *dir,
 		     int fhin, int fhout, int fherr);
 void mingw_execvp(const char *cmd, char *const *argv);
 #define execvp mingw_execvp
diff --git a/compat/win32/pthread.h b/compat/win32/pthread.h
index c72f100f40..a45f8d66df 100644
--- a/compat/win32/pthread.h
+++ b/compat/win32/pthread.h
@@ -18,11 +18,17 @@
  */
 #define pthread_mutex_t CRITICAL_SECTION
 
-#define pthread_mutex_init(a,b) InitializeCriticalSection((a))
+#define pthread_mutex_init(a,b) (InitializeCriticalSection((a)), 0)
 #define pthread_mutex_destroy(a) DeleteCriticalSection((a))
 #define pthread_mutex_lock EnterCriticalSection
 #define pthread_mutex_unlock LeaveCriticalSection
 
+typedef int pthread_mutexattr_t;
+#define pthread_mutexattr_init(a) (*(a) = 0)
+#define pthread_mutexattr_destroy(a) do {} while (0)
+#define pthread_mutexattr_settype(a, t) 0
+#define PTHREAD_MUTEX_RECURSIVE 0
+
 /*
  * Implement simple condition variable for Windows threads, based on ACE
  * implementation.
diff --git a/compat/win32mmap.c b/compat/win32mmap.c
index 1c5a14922f..b58aa69fa0 100644
--- a/compat/win32mmap.c
+++ b/compat/win32mmap.c
@@ -4,19 +4,19 @@ void *git_mmap(void *start, size_t length, int prot, int flags, int fd, off_t of
 {
 	HANDLE hmap;
 	void *temp;
-	size_t len;
+	off_t len;
 	struct stat st;
 	uint64_t o = offset;
 	uint32_t l = o & 0xFFFFFFFF;
 	uint32_t h = (o >> 32) & 0xFFFFFFFF;
 
 	if (!fstat(fd, &st))
-		len = xsize_t(st.st_size);
+		len = st.st_size;
 	else
 		die("mmap: could not determine filesize");
 
 	if ((length + offset) > len)
-		length = len - offset;
+		length = xsize_t(len - offset);
 
 	if (!(flags & MAP_PRIVATE))
 		die("Invalid usage of mmap when built with USE_WIN32_MMAP");
diff --git a/config.mak.in b/config.mak.in
index 6008ac9f1b..0d4b64d076 100644
--- a/config.mak.in
+++ b/config.mak.in
@@ -31,6 +31,7 @@ NO_OPENSSL=@NO_OPENSSL@
 NO_CURL=@NO_CURL@
 NO_EXPAT=@NO_EXPAT@
 NO_LIBGEN_H=@NO_LIBGEN_H@
+HAVE_PATHS_H=@HAVE_PATHS_H@
 NEEDS_LIBICONV=@NEEDS_LIBICONV@
 NEEDS_SOCKET=@NEEDS_SOCKET@
 NEEDS_RESOLV=@NEEDS_RESOLV@
diff --git a/configure.ac b/configure.ac
index 914ae5759f..71038fcf1c 100644
--- a/configure.ac
+++ b/configure.ac
@@ -179,6 +179,26 @@ fi],
    AC_MSG_NOTICE([Will try -pthread then -lpthread to enable POSIX Threads.])
 ])
 
+# Define option to enable JavaScript minification
+AC_ARG_ENABLE([jsmin],
+[AS_HELP_STRING([--enable-jsmin=PATH],
+  [PATH is the name of a JavaScript minifier or the absolute path to one.])],
+[
+  JSMIN=$enableval;
+  AC_MSG_NOTICE([Setting JSMIN to '$JSMIN' to enable JavaScript minifying])
+  GIT_CONF_APPEND_LINE(JSMIN=$enableval);
+])
+
+# Define option to enable CSS minification
+AC_ARG_ENABLE([cssmin],
+[AS_HELP_STRING([--enable-cssmin=PATH],
+  [PATH is the name of a CSS minifier or the absolute path to one.])],
+[
+  CSSMIN=$enableval;
+  AC_MSG_NOTICE([Setting CSSMIN to '$CSSMIN' to enable CSS minifying])
+  GIT_CONF_APPEND_LINE(CSSMIN=$enableval);
+])
+
 ## Site configuration (override autodetection)
 ## --with-PACKAGE[=ARG] and --without-PACKAGE
 AC_MSG_NOTICE([CHECKS for site configuration])
@@ -704,6 +724,12 @@ AC_CHECK_HEADER([libgen.h],
 [NO_LIBGEN_H=YesPlease])
 AC_SUBST(NO_LIBGEN_H)
 #
+# Define HAVE_PATHS_H if you have paths.h.
+AC_CHECK_HEADER([paths.h],
+[HAVE_PATHS_H=YesPlease],
+[HAVE_PATHS_H=])
+AC_SUBST(HAVE_PATHS_H)
+#
 # Define NO_STRCASESTR if you don't have strcasestr.
 GIT_CHECK_FUNC(strcasestr,
 [NO_STRCASESTR=],
diff --git a/connect.c b/connect.c
index beaff987c7..9ae991ac42 100644
--- a/connect.c
+++ b/connect.c
@@ -152,6 +152,28 @@ static enum protocol get_protocol(const char *name)
 #define STR_(s)	# s
 #define STR(s)	STR_(s)
 
+static void get_host_and_port(char **host, const char **port)
+{
+	char *colon, *end;
+
+	if (*host[0] == '[') {
+		end = strchr(*host + 1, ']');
+		if (end) {
+			*end = 0;
+			end++;
+			(*host)++;
+		} else
+			end = *host;
+	} else
+		end = *host;
+	colon = strchr(end, ':');
+
+	if (colon) {
+		*colon = 0;
+		*port = colon + 1;
+	}
+}
+
 #ifndef NO_IPV6
 
 static const char *ai_name(const struct addrinfo *ai)
@@ -170,30 +192,14 @@ static const char *ai_name(const struct addrinfo *ai)
 static int git_tcp_connect_sock(char *host, int flags)
 {
 	int sockfd = -1, saved_errno = 0;
-	char *colon, *end;
 	const char *port = STR(DEFAULT_GIT_PORT);
 	struct addrinfo hints, *ai0, *ai;
 	int gai;
 	int cnt = 0;
 
-	if (host[0] == '[') {
-		end = strchr(host + 1, ']');
-		if (end) {
-			*end = 0;
-			end++;
-			host++;
-		} else
-			end = host;
-	} else
-		end = host;
-	colon = strchr(end, ':');
-
-	if (colon) {
-		*colon = 0;
-		port = colon + 1;
-		if (!*port)
-			port = "<none>";
-	}
+	get_host_and_port(&host, &port);
+	if (!*port)
+		port = "<none>";
 
 	memset(&hints, 0, sizeof(hints));
 	hints.ai_socktype = SOCK_STREAM;
@@ -251,30 +257,15 @@ static int git_tcp_connect_sock(char *host, int flags)
 static int git_tcp_connect_sock(char *host, int flags)
 {
 	int sockfd = -1, saved_errno = 0;
-	char *colon, *end;
-	char *port = STR(DEFAULT_GIT_PORT), *ep;
+	const char *port = STR(DEFAULT_GIT_PORT);
+	char *ep;
 	struct hostent *he;
 	struct sockaddr_in sa;
 	char **ap;
 	unsigned int nport;
 	int cnt;
 
-	if (host[0] == '[') {
-		end = strchr(host + 1, ']');
-		if (end) {
-			*end = 0;
-			end++;
-			host++;
-		} else
-			end = host;
-	} else
-		end = host;
-	colon = strchr(end, ':');
-
-	if (colon) {
-		*colon = 0;
-		port = colon + 1;
-	}
+	get_host_and_port(&host, &port);
 
 	if (flags & CONNECT_VERBOSE)
 		fprintf(stderr, "Looking up %s ... ", host);
@@ -406,26 +397,10 @@ static int git_use_proxy(const char *host)
 static void git_proxy_connect(int fd[2], char *host)
 {
 	const char *port = STR(DEFAULT_GIT_PORT);
-	char *colon, *end;
 	const char *argv[4];
 	struct child_process proxy;
 
-	if (host[0] == '[') {
-		end = strchr(host + 1, ']');
-		if (end) {
-			*end = 0;
-			end++;
-			host++;
-		} else
-			end = host;
-	} else
-		end = host;
-	colon = strchr(end, ':');
-
-	if (colon) {
-		*colon = 0;
-		port = colon + 1;
-	}
+	get_host_and_port(&host, &port);
 
 	argv[0] = git_proxy_command;
 	argv[1] = host;
@@ -637,3 +612,40 @@ int finish_connect(struct child_process *conn)
 	free(conn);
 	return code;
 }
+
+char *git_getpass(const char *prompt)
+{
+	char *askpass;
+	struct child_process pass;
+	const char *args[3];
+	static struct strbuf buffer = STRBUF_INIT;
+
+	askpass = getenv("GIT_ASKPASS");
+
+	if (!askpass || !(*askpass))
+		return getpass(prompt);
+
+	args[0] = askpass;
+	args[1]	= prompt;
+	args[2] = NULL;
+
+	memset(&pass, 0, sizeof(pass));
+	pass.argv = args;
+	pass.out = -1;
+
+	if (start_command(&pass))
+		exit(1);
+
+	strbuf_reset(&buffer);
+	if (strbuf_read(&buffer, pass.out, 20) < 0)
+		die("failed to read password from %s\n", askpass);
+
+	close(pass.out);
+
+	if (finish_command(&pass))
+		exit(1);
+
+	strbuf_setlen(&buffer, strcspn(buffer.buf, "\r\n"));
+
+	return buffer.buf;
+}
diff --git a/contrib/ciabot/README b/contrib/ciabot/README
new file mode 100644
index 0000000000..3b916acece
--- /dev/null
+++ b/contrib/ciabot/README
@@ -0,0 +1,12 @@
+These are hook scripts for the CIA notification service at <http://cia.vc/>
+
+They are maintained by Eric S. Raymond <esr@thyrsus.com>.  There is an
+upstream resource page for them at <http://www.catb.org/esr/ciabot/>,
+but they are unlikely to change rapidly.
+
+You probably want the Python version; it's faster, more capable, and
+better documented.  The shell version is maintained only as a fallback
+for use on hosting sites that don't permit Python hook scripts.
+
+You will find installation instructions for each script in its comment
+header.
diff --git a/contrib/ciabot/ciabot.py b/contrib/ciabot/ciabot.py
new file mode 100755
index 0000000000..d0627e0852
--- /dev/null
+++ b/contrib/ciabot/ciabot.py
@@ -0,0 +1,222 @@
+#!/usr/bin/env python
+# Copyright (c) 2010 Eric S. Raymond <esr@thyrsus.com>
+# Distributed under BSD terms.
+#
+# This script contains porcelain and porcelain byproducts.
+# It's Python because the Python standard libraries avoid portability/security
+# issues raised by callouts in the ancestral Perl and sh scripts.  It should
+# be compatible back to Python 2.1.5
+#
+# usage: ciabot.py [-V] [-n] [-p projectname]  [refname [commits...]]
+#
+# This script is meant to be run either in a post-commit hook or in an
+# update hook.  If there's nothing unusual about your hosting setup,
+# you can specify the project name with a -p option and avoid having
+# to modify this script.  Try it with -n to see the notification mail
+# dumped to stdout and verify that it looks sane. With -V it dumps its
+# version and exits.
+#
+# In post-commit, run it without arguments (other than possibly a -p
+# option). It will query for current HEAD and the latest commit ID to
+# get the information it needs.
+#
+# In update, call it with a refname followed by a list of commits:
+# You want to reverse the order git rev-list emits becxause it lists
+# from most recent to oldest.
+#
+# /path/to/ciabot.py ${refname} $(git rev-list ${oldhead}..${newhead} | tac)
+#
+# Note: this script uses mail, not XML-RPC, in order to avoid stalling
+# until timeout when the CIA XML-RPC server is down.
+#
+
+#
+# The project as known to CIA. You will either want to change this
+# or invoke the script with a -p option to set it.
+#
+project=None
+
+#
+# You may not need to change these:
+#
+import os, sys, commands, socket, urllib
+
+# Name of the repository.
+# You can hardwire this to make the script faster.
+repo = os.path.basename(os.getcwd())
+
+# Fully-qualified domain name of this host.
+# You can hardwire this to make the script faster.
+host = socket.getfqdn()
+
+# Changeset URL prefix for your repo: when the commit ID is appended
+# to this, it should point at a CGI that will display the commit
+# through gitweb or something similar. The defaults will probably
+# work if you have a typical gitweb/cgit setup.
+#
+#urlprefix="http://%(host)s/cgi-bin/gitweb.cgi?p=%(repo)s;a=commit;h="
+urlprefix="http://%(host)s/cgi-bin/cgit.cgi/%(repo)s/commit/?id="
+
+# The service used to turn your gitwebbish URL into a tinyurl so it
+# will take up less space on the IRC notification line.
+tinyifier = "http://tinyurl.com/api-create.php?url="
+
+# The template used to generate the XML messages to CIA.  You can make
+# visible changes to the IRC-bot notification lines by hacking this.
+# The default will produce a notfication line that looks like this:
+#
+# ${project}: ${author} ${repo}:${branch} * ${rev} ${files}: ${logmsg} ${url}
+#
+# By omitting $files you can collapse the files part to a single slash.
+xml = '''\
+<message>
+  <generator>
+    <name>CIA Python client for Git</name>
+    <version>%(gitver)s</version>
+    <url>%(generator)s</url>
+  </generator>
+  <source>
+    <project>%(project)s</project>
+    <branch>%(repo)s:%(branch)s</branch>
+  </source>
+  <timestamp>%(ts)s</timestamp>
+  <body>
+    <commit>
+      <author>%(author)s</author>
+      <revision>%(rev)s</revision>
+      <files>
+        %(files)s
+      </files>
+      <log>%(logmsg)s %(url)s</log>
+      <url>%(url)s</url>
+    </commit>
+  </body>
+</message>
+'''
+
+#
+# No user-serviceable parts below this line:
+#
+
+# Addresses for the e-mail. The from address is a dummy, since CIA
+# will never reply to this mail.
+fromaddr = "CIABOT-NOREPLY@" + host
+toaddr = "cia@cia.navi.cx"
+
+# Identify the generator script.
+# Should only change when the script itself gets a new home and maintainer.
+generator="http://www.catb.org/~esr/ciabot.py"
+
+def do(command):
+    return commands.getstatusoutput(command)[1]
+
+def report(refname, merged):
+    "Generate a commit notification to be reported to CIA"
+
+    # Try to tinyfy a reference to a web view for this commit.
+    try:
+        url = open(urllib.urlretrieve(tinyifier + urlprefix + merged)[0]).read()
+    except:
+        url = urlprefix + merged
+
+    branch = os.path.basename(refname)
+
+    # Compute a shortnane for the revision
+    rev = do("git describe ${merged} 2>/dev/null") or merged[:12]
+
+    # Extract the neta-information for the commit
+    rawcommit = do("git cat-file commit " + merged)
+    files=do("git diff-tree -r --name-only '"+ merged +"' | sed -e '1d' -e 's-.*-<file>&</file>-'")
+    inheader = True
+    headers = {}
+    logmsg = ""
+    for line in rawcommit.split("\n"):
+        if inheader:
+            if line:
+                fields = line.split()
+                headers[fields[0]] = " ".join(fields[1:])
+            else:
+                inheader = False
+        else:
+            logmsg = line
+            break
+    (author, ts) = headers["author"].split(">")
+
+    # This discards the part of the authors addrsss after @.
+    # Might be bnicece to ship the full email address, if not
+    # for spammers' address harvesters - getting this wrong
+    # would make the freenode #commits channel into harvester heaven.
+    author = author.replace("<", "").split("@")[0].split()[-1]
+
+    # This ignores the timezone.  Not clear what to do with it...
+    ts = ts.strip().split()[0]
+
+    context = locals()
+    context.update(globals())
+
+    out = xml % context
+
+    message = '''\
+Message-ID: <%(merged)s.%(author)s@%(project)s>
+From: %(fromaddr)s
+To: %(toaddr)s
+Content-type: text/xml
+Subject: DeliverXML
+
+%(out)s''' % locals()
+
+    return message
+
+if __name__ == "__main__":
+    import getopt
+
+    try:
+        (options, arguments) = getopt.getopt(sys.argv[1:], "np:V")
+    except getopt.GetoptError, msg:
+        print "ciabot.py: " + str(msg)
+        raise SystemExit, 1
+
+    mailit = True
+    for (switch, val) in options:
+        if switch == '-p':
+            project = val
+        elif switch == '-n':
+            mailit = False
+        elif switch == '-V':
+            print "ciabot.py: version 3.2"
+            sys.exit(0)
+
+    # Cough and die if user has not specified a project
+    if not project:
+        sys.stderr.write("ciabot.py: no project specified, bailing out.\n")
+        sys.exit(1)
+
+    # We'll need the git version number.
+    gitver = do("git --version").split()[0]
+
+    urlprefix = urlprefix % globals()
+
+    # The script wants a reference to head followed by the list of
+    # commit ID to report about.
+    if len(arguments) == 0:
+        refname = do("git symbolic-ref HEAD 2>/dev/null")
+        merges = [do("git rev-parse HEAD")]
+    else:
+        refname = arguments[0]
+        merges = arguments[1:]
+
+    if mailit:
+        import smtplib
+        server = smtplib.SMTP('localhost')
+
+    for merged in merges:
+        message = report(refname, merged)
+        if mailit:
+            server.sendmail(fromaddr, [toaddr], message)
+        else:
+            print message
+
+    if mailit:
+        server.quit()
+
+#End
diff --git a/contrib/ciabot/ciabot.sh b/contrib/ciabot/ciabot.sh
new file mode 100755
index 0000000000..eb87bba38e
--- /dev/null
+++ b/contrib/ciabot/ciabot.sh
@@ -0,0 +1,192 @@
+#!/bin/sh
+# Distributed under the terms of the GNU General Public License v2
+# Copyright (c) 2006 Fernando J. Pereda <ferdy@gentoo.org>
+# Copyright (c) 2008 Natanael Copa <natanael.copa@gmail.com>
+# Copyright (c) 2010 Eric S. Raymond <esr@thyrsus.com>
+#
+# This is a version 3.x of ciabot.sh; use -V to find the exact
+# version.  Versions 1 and 2 were shipped in 2006 and 2008 and are not
+# version-stamped.  The version 2 maintainer has passed the baton.
+#
+# Note: This script should be considered obsolete.
+# There is a faster, better-documented rewrite in Python: find it as ciabot.py
+# Use this only if your hosting site forbids Python hooks.
+#
+# Originally based on Git ciabot.pl by Petr Baudis.
+# This script contains porcelain and porcelain byproducts.
+#
+# usage: ciabot.sh [-V] [-n] [-p projectname] [refname commit]
+#
+# This script is meant to be run either in a post-commit hook or in an
+# update hook.  If there's nothing unusual about your hosting setup,
+# you can specify the project name with a -p option and avoid having
+# to modify this script.  Try it with -n first to see the notification
+# mail dumped to stdout and verify that it looks sane.  Use -V to dump
+# the version and exit.
+#
+# In post-commit, run it without arguments (other than possibly a -p
+# option). It will query for current HEAD and the latest commit ID to
+# get the information it needs.
+#
+# In update, you have to call it once per merged commit:
+#
+#       refname=$1
+#       oldhead=$2
+#       newhead=$3
+#       for merged in $(git rev-list ${oldhead}..${newhead} | tac) ; do
+#               /path/to/ciabot.bash ${refname} ${merged}
+#       done
+#
+# The reason for the tac call ids that git rev-list emits commits from
+# most recent to least - better to ship notifactions from oldest to newest.
+#
+# Note: this script uses mail, not XML-RPC, in order to avoid stalling
+# until timeout when the CIA XML-RPC server is down.
+#
+
+#
+# The project as known to CIA. You will either want to change this
+# or set the project name with a -p option.
+#
+project=
+
+#
+# You may not need to change these:
+#
+
+# Name of the repository.
+# You can hardwire this to make the script faster.
+repo="`basename ${PWD}`"
+
+# Fully qualified domain name of the repo host.
+# You can hardwire this to make the script faster.
+host=`hostname --fqdn`
+
+# Changeset URL prefix for your repo: when the commit ID is appended
+# to this, it should point at a CGI that will display the commit
+# through gitweb or something similar. The defaults will probably
+# work if you have a typical gitweb/cgit setup.
+#urlprefix="http://${host}/cgi-bin/gitweb.cgi?p=${repo};a=commit;h="
+urlprefix="http://${host}/cgi-bin/cgit.cgi/${repo}/commit/?id="
+
+#
+# You probably will not need to change the following:
+#
+
+# Identify the script. Should change only when the script itself
+# gets a new home and maintainer.
+generator="http://www.catb.org/~esr/ciabot/ciabot.sh"
+
+# Addresses for the e-mail
+from="CIABOT-NOREPLY@${host}"
+to="cia@cia.navi.cx"
+
+# SMTP client to use - may need to edit the absolute pathname for your system
+sendmail="sendmail -t -f ${from}"
+
+#
+# No user-serviceable parts below this line:
+#
+
+# Should include all places sendmail is likely to lurk.
+PATH="$PATH:/usr/sbin/"
+
+mode=mailit
+while getopts pnV opt
+do
+    case $opt in
+	p) project=$2; shift ; shift ;;
+	n) mode=dumpit; shift ;;
+	V) echo "ciabot.sh: version 3.2"; exit 0; shift ;;
+    esac
+done
+
+# Cough and die if user has not specified a project
+if [ -z "$project" ]
+then
+    echo "ciabot.sh: no project specified, bailing out." >&2
+    exit 1
+fi
+
+if [ $# -eq 0 ] ; then
+	refname=$(git symbolic-ref HEAD 2>/dev/null)
+	merged=$(git rev-parse HEAD)
+else
+	refname=$1
+	merged=$2
+fi
+
+# This tries to turn your gitwebbish URL into a tinyurl so it will take up
+# less space on the IRC notification line. Some repo sites (I'm looking at
+# you, berlios.de!) forbid wget calls for security reasons.  On these,
+# the code will fall back to the full un-tinyfied URL.
+longurl=${urlprefix}${merged}
+url=$(wget -O - -q http://tinyurl.com/api-create.php?url=${longurl} 2>/dev/null)
+if [ -z "$url" ]; then
+	url="${longurl}"
+fi
+
+refname=${refname##refs/heads/}
+
+gitver=$(git --version)
+gitver=${gitver##* }
+
+rev=$(git describe ${merged} 2>/dev/null)
+# ${merged:0:12} was the only bashism left in the 2008 version of this
+# script, according to checkbashisms.  Replace it with ${merged} here
+# because it was just a fallback anyway, and it's worth accepting a
+# longer fallback for faster execution and removing the bash
+# dependency.
+[ -z ${rev} ] && rev=${merged}
+
+# This discards the part of the author's address after @.
+# Might be nice to ship the full email address, if not
+# for spammers' address harvesters - getting this wrong
+# would make the freenode #commits channel into harvester heaven.
+rawcommit=$(git cat-file commit ${merged})
+author=$(echo "$rawcommit" | sed -n -e '/^author .*<\([^@]*\).*$/s--\1-p')
+logmessage=$(echo "$rawcommit" | sed -e '1,/^$/d' | head -n 1)
+logmessage=$(echo "$logmessage" | sed 's/\&/&amp\;/g; s/</&lt\;/g; s/>/&gt\;/g')
+ts=$(echo "$rawcommit" | sed -n -e '/^author .*> \([0-9]\+\).*$/s--\1-p')
+files=$(git diff-tree -r --name-only ${merged} | sed -e '1d' -e 's-.*-<file>&</file>-')
+
+out="
+<message>
+  <generator>
+    <name>CIA Shell client for Git</name>
+    <version>${gitver}</version>
+    <url>${generator}</url>
+  </generator>
+  <source>
+    <project>${project}</project>
+    <branch>$repo:${refname}</branch>
+  </source>
+  <timestamp>${ts}</timestamp>
+  <body>
+    <commit>
+      <author>${author}</author>
+      <revision>${rev}</revision>
+      <files>
+	${files}
+      </files>
+      <log>${logmessage} ${url}</log>
+      <url>${url}</url>
+    </commit>
+  </body>
+</message>"
+
+if [ "$mode" = "dumpit" ]
+then
+    sendmail=cat
+fi
+
+${sendmail} << EOM
+Message-ID: <${merged}.${author}@${project}>
+From: ${from}
+To: ${to}
+Content-type: text/xml
+Subject: DeliverXML
+${out}
+EOM
+
+# vim: set tw=70 :
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 733ac39a32..57245a8c01 100755
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -627,10 +627,19 @@ __git_aliased_command ()
 	local word cmdline=$(git --git-dir="$(__gitdir)" \
 		config --get "alias.$1")
 	for word in $cmdline; do
-		if [ "${word##-*}" ]; then
-			echo $word
+		case "$word" in
+		\!gitk|gitk)
+			echo "gitk"
 			return
-		fi
+			;;
+		\!*)	: shell command alias ;;
+		-*)	: option ;;
+		*=*)	: setting env ;;
+		git)	: git itself ;;
+		*)
+			echo "$word"
+			return
+		esac
 	done
 }
 
@@ -788,6 +797,7 @@ _git_branch ()
 		__gitcomp "
 			--color --no-color --verbose --abbrev= --no-abbrev
 			--track --no-track --contains --merged --no-merged
+			--set-upstream
 			"
 		;;
 	*)
@@ -1084,6 +1094,11 @@ _git_gc ()
 	COMPREPLY=()
 }
 
+_git_gitk ()
+{
+	_gitk
+}
+
 _git_grep ()
 {
 	__git_has_doubledash && return
@@ -1436,6 +1451,11 @@ _git_send_email ()
 	COMPREPLY=()
 }
 
+_git_stage ()
+{
+	_git_add
+}
+
 __git_config_get_set_variables ()
 {
 	local prevword word config_file= c=$COMP_CWORD
@@ -2167,6 +2187,11 @@ _git_tag ()
 	esac
 }
 
+_git_whatchanged ()
+{
+	_git_log
+}
+
 _git ()
 {
 	local i c=1 command __git_dir
@@ -2203,64 +2228,14 @@ _git ()
 		return
 	fi
 
+	local completion_func="_git_${command//-/_}"
+	declare -F $completion_func >/dev/null && $completion_func && return
+
 	local expansion=$(__git_aliased_command "$command")
-	[ "$expansion" ] && command="$expansion"
-
-	case "$command" in
-	am)          _git_am ;;
-	add)         _git_add ;;
-	apply)       _git_apply ;;
-	archive)     _git_archive ;;
-	bisect)      _git_bisect ;;
-	bundle)      _git_bundle ;;
-	branch)      _git_branch ;;
-	checkout)    _git_checkout ;;
-	cherry)      _git_cherry ;;
-	cherry-pick) _git_cherry_pick ;;
-	clean)       _git_clean ;;
-	clone)       _git_clone ;;
-	commit)      _git_commit ;;
-	config)      _git_config ;;
-	describe)    _git_describe ;;
-	diff)        _git_diff ;;
-	difftool)    _git_difftool ;;
-	fetch)       _git_fetch ;;
-	format-patch) _git_format_patch ;;
-	fsck)        _git_fsck ;;
-	gc)          _git_gc ;;
-	grep)        _git_grep ;;
-	help)        _git_help ;;
-	init)        _git_init ;;
-	log)         _git_log ;;
-	ls-files)    _git_ls_files ;;
-	ls-remote)   _git_ls_remote ;;
-	ls-tree)     _git_ls_tree ;;
-	merge)       _git_merge;;
-	mergetool)   _git_mergetool;;
-	merge-base)  _git_merge_base ;;
-	mv)          _git_mv ;;
-	name-rev)    _git_name_rev ;;
-	notes)       _git_notes ;;
-	pull)        _git_pull ;;
-	push)        _git_push ;;
-	rebase)      _git_rebase ;;
-	remote)      _git_remote ;;
-	replace)     _git_replace ;;
-	reset)       _git_reset ;;
-	revert)      _git_revert ;;
-	rm)          _git_rm ;;
-	send-email)  _git_send_email ;;
-	shortlog)    _git_shortlog ;;
-	show)        _git_show ;;
-	show-branch) _git_show_branch ;;
-	stash)       _git_stash ;;
-	stage)       _git_add ;;
-	submodule)   _git_submodule ;;
-	svn)         _git_svn ;;
-	tag)         _git_tag ;;
-	whatchanged) _git_log ;;
-	*)           COMPREPLY=() ;;
-	esac
+	if [ -n "$expansion" ]; then
+		completion_func="_git_${expansion//-/_}"
+		declare -F $completion_func >/dev/null && $completion_func
+	fi
 }
 
 _gitk ()
diff --git a/git-notes.sh b/contrib/examples/git-notes.sh
index e642e47d9f..e642e47d9f 100755
--- a/git-notes.sh
+++ b/contrib/examples/git-notes.sh
diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4
index cd96c6f81f..c1ea643ace 100755
--- a/contrib/fast-import/git-p4
+++ b/contrib/fast-import/git-p4
@@ -802,7 +802,7 @@ class P4Submit(Command):
         self.oldWorkingDirectory = os.getcwd()
 
         chdir(self.clientPath)
-        print "Syncronizing p4 checkout..."
+        print "Synchronizing p4 checkout..."
         p4_system("sync ...")
 
         self.check()
diff --git a/contrib/hooks/post-receive-email b/contrib/hooks/post-receive-email
index 58a35c8287..30ae63d74d 100755
--- a/contrib/hooks/post-receive-email
+++ b/contrib/hooks/post-receive-email
@@ -23,6 +23,13 @@
 # possible for the email to be from someone other than the person doing the
 # push.
 #
+# To help with debugging and use on pre-v1.5.1 git servers, this script will
+# also obey the interface of hooks/update, taking its arguments on the
+# command line.  Unfortunately, hooks/update is called once for each ref.
+# To avoid firing one email per ref, this script just prints its output to
+# the screen when used in this mode.  The output can then be redirected if
+# wanted.
+#
 # Config
 # ------
 # hooks.mailinglist
diff --git a/date.c b/date.c
index 002aa3c8d6..6bae49ca33 100644
--- a/date.c
+++ b/date.c
@@ -229,6 +229,7 @@ static const struct {
 
 	{ "GMT",    0, 0, },	/* Greenwich Mean */
 	{ "UTC",    0, 0, },	/* Universal (Coordinated) */
+	{ "Z",      0, 0, },    /* Zulu, alias for UTC */
 
 	{ "WET",    0, 0, },	/* Western European */
 	{ "BST",    0, 1, },	/* British Summer */
@@ -305,7 +306,7 @@ static int match_alpha(const char *date, struct tm *tm, int *offset)
 
 	for (i = 0; i < ARRAY_SIZE(timezone_names); i++) {
 		int match = match_string(date, timezone_names[i].name);
-		if (match >= 3) {
+		if (match >= 3 || match == strlen(timezone_names[i].name)) {
 			int off = timezone_names[i].offset;
 
 			/* This is bogus, but we like summer */
diff --git a/diff-lib.c b/diff-lib.c
index d7e13cb177..c9f6e05bad 100644
--- a/diff-lib.c
+++ b/diff-lib.c
@@ -55,6 +55,27 @@ static int check_removed(const struct cache_entry *ce, struct stat *st)
 	return 0;
 }
 
+/*
+ * Has a file changed or has a submodule new commits or a dirty work tree?
+ *
+ * Return 1 when changes are detected, 0 otherwise. If the DIRTY_SUBMODULES
+ * option is set, the caller does not only want to know if a submodule is
+ * modified at all but wants to know all the conditions that are met (new
+ * commits, untracked content and/or modified content).
+ */
+static int match_stat_with_submodule(struct diff_options *diffopt,
+				      struct cache_entry *ce, struct stat *st,
+				      unsigned ce_option, unsigned *dirty_submodule)
+{
+	int changed = ce_match_stat(ce, st, ce_option);
+	if (S_ISGITLINK(ce->ce_mode)
+	    && !DIFF_OPT_TST(diffopt, IGNORE_SUBMODULES)
+	    && (!changed || DIFF_OPT_TST(diffopt, DIRTY_SUBMODULES))) {
+		*dirty_submodule = is_submodule_modified(ce->name, DIFF_OPT_TST(diffopt, IGNORE_UNTRACKED_IN_SUBMODULES));
+	}
+	return changed;
+}
+
 int run_diff_files(struct rev_info *revs, unsigned int option)
 {
 	int entries, i;
@@ -177,15 +198,9 @@ int run_diff_files(struct rev_info *revs, unsigned int option)
 				       ce->sha1, ce->name, 0);
 			continue;
 		}
-		changed = ce_match_stat(ce, &st, ce_option);
-		if (S_ISGITLINK(ce->ce_mode)
-		    && !DIFF_OPT_TST(&revs->diffopt, IGNORE_SUBMODULES)
-		    && (!changed || (revs->diffopt.output_format & DIFF_FORMAT_PATCH))
-		    && is_submodule_modified(ce->name)) {
-			changed = 1;
-			dirty_submodule = 1;
-		}
-		if (!changed) {
+		changed = match_stat_with_submodule(&revs->diffopt, ce, &st,
+						    ce_option, &dirty_submodule);
+		if (!changed && !dirty_submodule) {
 			ce_mark_uptodate(ce);
 			if (!DIFF_OPT_TST(&revs->diffopt, FIND_COPIES_HARDER))
 				continue;
@@ -240,14 +255,8 @@ static int get_stat_data(struct cache_entry *ce,
 			}
 			return -1;
 		}
-		changed = ce_match_stat(ce, &st, 0);
-		if (S_ISGITLINK(ce->ce_mode)
-		    && !DIFF_OPT_TST(diffopt, IGNORE_SUBMODULES)
-		    && (!changed || (diffopt->output_format & DIFF_FORMAT_PATCH))
-		    && is_submodule_modified(ce->name)) {
-			changed = 1;
-			*dirty_submodule = 1;
-		}
+		changed = match_stat_with_submodule(diffopt, ce, &st,
+						    0, dirty_submodule);
 		if (changed) {
 			mode = ce_mode_from_stat(ce, st.st_mode);
 			sha1 = null_sha1;
@@ -322,7 +331,7 @@ static int show_modified(struct rev_info *revs,
 	}
 
 	oldmode = old->ce_mode;
-	if (mode == oldmode && !hashcmp(sha1, old->sha1) &&
+	if (mode == oldmode && !hashcmp(sha1, old->sha1) && !dirty_submodule &&
 	    !DIFF_OPT_TST(&revs->diffopt, FIND_COPIES_HARDER))
 		return 0;
 
@@ -510,9 +519,12 @@ int do_diff_cache(const unsigned char *tree_sha1, struct diff_options *opt)
 int index_differs_from(const char *def, int diff_flags)
 {
 	struct rev_info rev;
+	struct setup_revision_opt opt;
 
 	init_revisions(&rev, NULL);
-	setup_revisions(0, NULL, &rev, def);
+	memset(&opt, 0, sizeof(opt));
+	opt.def = def;
+	setup_revisions(0, NULL, &rev, &opt);
 	DIFF_OPT_SET(&rev.diffopt, QUICK);
 	DIFF_OPT_SET(&rev.diffopt, EXIT_WITH_STATUS);
 	rev.diffopt.flags |= diff_flags;
diff --git a/diff-no-index.c b/diff-no-index.c
index aae8e7accc..4cd9dacbe8 100644
--- a/diff-no-index.c
+++ b/diff-no-index.c
@@ -150,16 +150,14 @@ static int queue_diff(struct diff_options *o,
 
 static int path_outside_repo(const char *path)
 {
-	/*
-	 * We have already done setup_git_directory_gently() so we
-	 * know we are inside a git work tree already.
-	 */
 	const char *work_tree;
 	size_t len;
 
 	if (!is_absolute_path(path))
 		return 0;
 	work_tree = get_git_work_tree();
+	if (!work_tree)
+		return 1;
 	len = strlen(work_tree);
 	if (strncmp(path, work_tree, len) ||
 	    (path[len] != '\0' && path[len] != '/'))
diff --git a/diff.c b/diff.c
index edec0f6b81..57e1212fbc 100644
--- a/diff.c
+++ b/diff.c
@@ -551,6 +551,10 @@ static void emit_rewrite_diff(const char *name_a,
 		emit_rewrite_lines(&ecbdata, '-', data_one, size_one);
 	if (lc_b)
 		emit_rewrite_lines(&ecbdata, '+', data_two, size_two);
+	if (textconv_one)
+		free((char *)data_one);
+	if (textconv_two)
+		free((char *)data_two);
 }
 
 struct diff_words_buffer {
@@ -696,7 +700,6 @@ static void diff_words_show(struct diff_words_data *diff_words)
 {
 	xpparam_t xpp;
 	xdemitconf_t xecfg;
-	xdemitcb_t ecb;
 	mmfile_t minus, plus;
 
 	/* special case: only removal */
@@ -714,11 +717,11 @@ static void diff_words_show(struct diff_words_data *diff_words)
 	memset(&xecfg, 0, sizeof(xecfg));
 	diff_words_fill(&diff_words->minus, &minus, diff_words->word_regex);
 	diff_words_fill(&diff_words->plus, &plus, diff_words->word_regex);
-	xpp.flags = XDF_NEED_MINIMAL;
+	xpp.flags = 0;
 	/* as only the hunk header will be parsed, we need a 0-context */
 	xecfg.ctxlen = 0;
 	xdi_diff_outf(&minus, &plus, fn_out_diff_words_aux, diff_words,
-		      &xpp, &xecfg, &ecb);
+		      &xpp, &xecfg);
 	free(minus.ptr);
 	free(plus.ptr);
 	if (diff_words->current_plus != diff_words->plus.text.ptr +
@@ -1597,6 +1600,7 @@ static void builtin_diff(const char *name_a,
 			 struct diff_filespec *one,
 			 struct diff_filespec *two,
 			 const char *xfrm_msg,
+			 int must_show_header,
 			 struct diff_options *o,
 			 int complete_rewrite)
 {
@@ -1646,21 +1650,24 @@ static void builtin_diff(const char *name_a,
 	if (lbl[0][0] == '/') {
 		/* /dev/null */
 		strbuf_addf(&header, "%snew file mode %06o%s\n", set, two->mode, reset);
-		if (xfrm_msg && xfrm_msg[0])
-			strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset);
+		if (xfrm_msg)
+			strbuf_addstr(&header, xfrm_msg);
+		must_show_header = 1;
 	}
 	else if (lbl[1][0] == '/') {
 		strbuf_addf(&header, "%sdeleted file mode %06o%s\n", set, one->mode, reset);
-		if (xfrm_msg && xfrm_msg[0])
-			strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset);
+		if (xfrm_msg)
+			strbuf_addstr(&header, xfrm_msg);
+		must_show_header = 1;
 	}
 	else {
 		if (one->mode != two->mode) {
 			strbuf_addf(&header, "%sold mode %06o%s\n", set, one->mode, reset);
 			strbuf_addf(&header, "%snew mode %06o%s\n", set, two->mode, reset);
+			must_show_header = 1;
 		}
-		if (xfrm_msg && xfrm_msg[0])
-			strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset);
+		if (xfrm_msg)
+			strbuf_addstr(&header, xfrm_msg);
 
 		/*
 		 * we do not run diff between different kind
@@ -1688,8 +1695,11 @@ static void builtin_diff(const char *name_a,
 	      (diff_filespec_is_binary(two) && !textconv_two) )) {
 		/* Quite common confusing case */
 		if (mf1.size == mf2.size &&
-		    !memcmp(mf1.ptr, mf2.ptr, mf1.size))
+		    !memcmp(mf1.ptr, mf2.ptr, mf1.size)) {
+			if (must_show_header)
+				fprintf(o->file, "%s", header.buf);
 			goto free_ab_and_return;
+		}
 		fprintf(o->file, "%s", header.buf);
 		strbuf_reset(&header);
 		if (DIFF_OPT_TST(o, BINARY))
@@ -1704,11 +1714,10 @@ static void builtin_diff(const char *name_a,
 		const char *diffopts = getenv("GIT_DIFF_OPTS");
 		xpparam_t xpp;
 		xdemitconf_t xecfg;
-		xdemitcb_t ecb;
 		struct emit_callback ecbdata;
 		const struct userdiff_funcname *pe;
 
-		if (!DIFF_XDL_TST(o, WHITESPACE_FLAGS)) {
+		if (!DIFF_XDL_TST(o, WHITESPACE_FLAGS) || must_show_header) {
 			fprintf(o->file, "%s", header.buf);
 			strbuf_reset(&header);
 		}
@@ -1743,7 +1752,7 @@ static void builtin_diff(const char *name_a,
 			check_blank_at_eof(&mf1, &mf2, &ecbdata);
 		ecbdata.file = o->file;
 		ecbdata.header = header.len ? &header : NULL;
-		xpp.flags = XDF_NEED_MINIMAL | o->xdl_opts;
+		xpp.flags = o->xdl_opts;
 		xecfg.ctxlen = o->context;
 		xecfg.interhunkctxlen = o->interhunkcontext;
 		xecfg.flags = XDL_EMIT_FUNCNAMES;
@@ -1776,7 +1785,7 @@ static void builtin_diff(const char *name_a,
 			}
 		}
 		xdi_diff_outf(&mf1, &mf2, fn_out_consume, &ecbdata,
-			      &xpp, &xecfg, &ecb);
+			      &xpp, &xecfg);
 		if (DIFF_OPT_TST(o, COLOR_DIFF_WORDS))
 			free_diff_words_data(&ecbdata);
 		if (textconv_one)
@@ -1829,13 +1838,12 @@ static void builtin_diffstat(const char *name_a, const char *name_b,
 		/* Crazy xdl interfaces.. */
 		xpparam_t xpp;
 		xdemitconf_t xecfg;
-		xdemitcb_t ecb;
 
 		memset(&xpp, 0, sizeof(xpp));
 		memset(&xecfg, 0, sizeof(xecfg));
-		xpp.flags = XDF_NEED_MINIMAL | o->xdl_opts;
+		xpp.flags = o->xdl_opts;
 		xdi_diff_outf(&mf1, &mf2, diffstat_consume, diffstat,
-			      &xpp, &xecfg, &ecb);
+			      &xpp, &xecfg);
 	}
 
  free_and_return:
@@ -1877,14 +1885,13 @@ static void builtin_checkdiff(const char *name_a, const char *name_b,
 		/* Crazy xdl interfaces.. */
 		xpparam_t xpp;
 		xdemitconf_t xecfg;
-		xdemitcb_t ecb;
 
 		memset(&xpp, 0, sizeof(xpp));
 		memset(&xecfg, 0, sizeof(xecfg));
 		xecfg.ctxlen = 1; /* at least one context line */
-		xpp.flags = XDF_NEED_MINIMAL;
+		xpp.flags = 0;
 		xdi_diff_outf(&mf1, &mf2, checkdiff_consume, &data,
-			      &xpp, &xecfg, &ecb);
+			      &xpp, &xecfg);
 
 		if (data.ws_rule & WS_BLANK_AT_EOF) {
 			struct emit_callback ecbdata;
@@ -2033,7 +2040,7 @@ static int diff_populate_gitlink(struct diff_filespec *s, int size_only)
 	char *data = xmalloc(100), *dirty = "";
 
 	/* Are we looking at the work tree? */
-	if (!s->sha1_valid && s->dirty_submodule)
+	if (s->dirty_submodule)
 		dirty = "-dirty";
 
 	len = snprintf(data, 100,
@@ -2319,36 +2326,43 @@ static void fill_metainfo(struct strbuf *msg,
 			  struct diff_filespec *one,
 			  struct diff_filespec *two,
 			  struct diff_options *o,
-			  struct diff_filepair *p)
+			  struct diff_filepair *p,
+			  int *must_show_header,
+			  int use_color)
 {
+	const char *set = diff_get_color(use_color, DIFF_METAINFO);
+	const char *reset = diff_get_color(use_color, DIFF_RESET);
+
+	*must_show_header = 1;
 	strbuf_init(msg, PATH_MAX * 2 + 300);
 	switch (p->status) {
 	case DIFF_STATUS_COPIED:
-		strbuf_addf(msg, "similarity index %d%%", similarity_index(p));
-		strbuf_addstr(msg, "\ncopy from ");
+		strbuf_addf(msg, "%ssimilarity index %d%%",
+			    set, similarity_index(p));
+		strbuf_addf(msg, "%s\n%scopy from ", reset, set);
 		quote_c_style(name, msg, NULL, 0);
-		strbuf_addstr(msg, "\ncopy to ");
+		strbuf_addf(msg, "%s\n%scopy to ", reset, set);
 		quote_c_style(other, msg, NULL, 0);
-		strbuf_addch(msg, '\n');
+		strbuf_addf(msg, "%s\n", reset);
 		break;
 	case DIFF_STATUS_RENAMED:
-		strbuf_addf(msg, "similarity index %d%%", similarity_index(p));
-		strbuf_addstr(msg, "\nrename from ");
+		strbuf_addf(msg, "%ssimilarity index %d%%",
+			    set, similarity_index(p));
+		strbuf_addf(msg, "%s\n%srename from ", reset, set);
 		quote_c_style(name, msg, NULL, 0);
-		strbuf_addstr(msg, "\nrename to ");
+		strbuf_addf(msg, "%s\n%srename to ", reset, set);
 		quote_c_style(other, msg, NULL, 0);
-		strbuf_addch(msg, '\n');
+		strbuf_addf(msg, "%s\n", reset);
 		break;
 	case DIFF_STATUS_MODIFIED:
 		if (p->score) {
-			strbuf_addf(msg, "dissimilarity index %d%%\n",
-				    similarity_index(p));
+			strbuf_addf(msg, "%sdissimilarity index %d%%%s\n",
+				    set, similarity_index(p), reset);
 			break;
 		}
 		/* fallthru */
 	default:
-		/* nothing */
-		;
+		*must_show_header = 0;
 	}
 	if (one && two && hashcmp(one->sha1, two->sha1)) {
 		int abbrev = DIFF_OPT_TST(o, FULL_INDEX) ? 40 : DEFAULT_ABBREV;
@@ -2359,15 +2373,13 @@ static void fill_metainfo(struct strbuf *msg,
 			    (!fill_mmfile(&mf, two) && diff_filespec_is_binary(two)))
 				abbrev = 40;
 		}
-		strbuf_addf(msg, "index %.*s..%.*s",
+		strbuf_addf(msg, "%sindex %.*s..%.*s", set,
 			    abbrev, sha1_to_hex(one->sha1),
 			    abbrev, sha1_to_hex(two->sha1));
 		if (one->mode == two->mode)
 			strbuf_addf(msg, " %06o", one->mode);
-		strbuf_addch(msg, '\n');
+		strbuf_addf(msg, "%s\n", reset);
 	}
-	if (msg->len)
-		strbuf_setlen(msg, msg->len - 1);
 }
 
 static void run_diff_cmd(const char *pgm,
@@ -2382,11 +2394,7 @@ static void run_diff_cmd(const char *pgm,
 {
 	const char *xfrm_msg = NULL;
 	int complete_rewrite = (p->status == DIFF_STATUS_MODIFIED) && p->score;
-
-	if (msg) {
-		fill_metainfo(msg, name, other, one, two, o, p);
-		xfrm_msg = msg->len ? msg->buf : NULL;
-	}
+	int must_show_header = 0;
 
 	if (!DIFF_OPT_TST(o, ALLOW_EXTERNAL))
 		pgm = NULL;
@@ -2396,6 +2404,17 @@ static void run_diff_cmd(const char *pgm,
 			pgm = drv->external;
 	}
 
+	if (msg) {
+		/*
+		 * don't use colors when the header is intended for an
+		 * external diff driver
+		 */
+		fill_metainfo(msg, name, other, one, two, o, p,
+			      &must_show_header,
+			      DIFF_OPT_TST(o, COLOR_DIFF) && !pgm);
+		xfrm_msg = msg->len ? msg->buf : NULL;
+	}
+
 	if (pgm) {
 		run_external_diff(pgm, name, other, one, two, xfrm_msg,
 				  complete_rewrite);
@@ -2403,7 +2422,8 @@ static void run_diff_cmd(const char *pgm,
 	}
 	if (one && two)
 		builtin_diff(name, other ? other : name,
-			     one, two, xfrm_msg, o, complete_rewrite);
+			     one, two, xfrm_msg, must_show_header,
+			     o, complete_rewrite);
 	else
 		fprintf(o->file, "* Unmerged path %s\n", name);
 }
@@ -2629,6 +2649,12 @@ int diff_setup_done(struct diff_options *options)
 	 */
 	if (options->pickaxe)
 		DIFF_OPT_SET(options, RECURSIVE);
+	/*
+	 * When patches are generated, submodules diffed against the work tree
+	 * must be checked for dirtiness too so it can be shown in the output
+	 */
+	if (options->output_format & DIFF_FORMAT_PATCH)
+		DIFF_OPT_SET(options, DIRTY_SUBMODULES);
 
 	if (options->detect_rename && options->rename_limit < 0)
 		options->rename_limit = diff_rename_limit_default;
@@ -2827,6 +2853,15 @@ int diff_opt_parse(struct diff_options *options, const char **av, int ac)
 		DIFF_OPT_SET(options, FOLLOW_RENAMES);
 	else if (!strcmp(arg, "--color"))
 		DIFF_OPT_SET(options, COLOR_DIFF);
+	else if (!prefixcmp(arg, "--color=")) {
+		int value = git_config_colorbool(NULL, arg+8, -1);
+		if (value == 0)
+			DIFF_OPT_CLR(options, COLOR_DIFF);
+		else if (value > 0)
+			DIFF_OPT_SET(options, COLOR_DIFF);
+		else
+			return error("option `color' expects \"always\", \"auto\", or \"never\"");
+	}
 	else if (!strcmp(arg, "--no-color"))
 		DIFF_OPT_CLR(options, COLOR_DIFF);
 	else if (!strcmp(arg, "--color-words")) {
@@ -3078,7 +3113,8 @@ int diff_unmodified_pair(struct diff_filepair *p)
 	 * dealing with a change.
 	 */
 	if (one->sha1_valid && two->sha1_valid &&
-	    !hashcmp(one->sha1, two->sha1))
+	    !hashcmp(one->sha1, two->sha1) &&
+	    !one->dirty_submodule && !two->dirty_submodule)
 		return 1; /* no change */
 	if (!one->sha1_valid && !two->sha1_valid)
 		return 1; /* both look at the same file on the filesystem. */
@@ -3213,6 +3249,8 @@ static void diff_resolve_rename_copy(void)
 		}
 		else if (hashcmp(p->one->sha1, p->two->sha1) ||
 			 p->one->mode != p->two->mode ||
+			 p->one->dirty_submodule ||
+			 p->two->dirty_submodule ||
 			 is_null_sha1(p->one->sha1))
 			p->status = DIFF_STATUS_MODIFIED;
 		else {
@@ -3361,7 +3399,6 @@ static int diff_get_patch_id(struct diff_options *options, unsigned char *sha1)
 	for (i = 0; i < q->nr; i++) {
 		xpparam_t xpp;
 		xdemitconf_t xecfg;
-		xdemitcb_t ecb;
 		mmfile_t mf1, mf2;
 		struct diff_filepair *p = q->queue[i];
 		int len1, len2;
@@ -3419,11 +3456,11 @@ static int diff_get_patch_id(struct diff_options *options, unsigned char *sha1)
 					len2, p->two->path);
 		git_SHA1_Update(&ctx, buffer, len1);
 
-		xpp.flags = XDF_NEED_MINIMAL;
+		xpp.flags = 0;
 		xecfg.ctxlen = 3;
 		xecfg.flags = XDL_EMIT_FUNCNAMES;
 		xdi_diff_outf(&mf1, &mf2, patch_id_consume, &data,
-			      &xpp, &xecfg, &ecb);
+			      &xpp, &xecfg);
 	}
 
 	git_SHA1_Final(sha1, &ctx);
diff --git a/diff.h b/diff.h
index 2ef3341fb0..6a71013dc6 100644
--- a/diff.h
+++ b/diff.h
@@ -69,6 +69,8 @@ typedef void (*diff_format_fn_t)(struct diff_queue_struct *q,
 #define DIFF_OPT_ALLOW_TEXTCONV      (1 << 21)
 #define DIFF_OPT_DIFF_FROM_CONTENTS  (1 << 22)
 #define DIFF_OPT_SUBMODULE_LOG       (1 << 23)
+#define DIFF_OPT_DIRTY_SUBMODULES    (1 << 24)
+#define DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES (1 << 25)
 
 #define DIFF_OPT_TST(opts, flag)    ((opts)->flags & DIFF_OPT_##flag)
 #define DIFF_OPT_SET(opts, flag)    ((opts)->flags |= DIFF_OPT_##flag)
diff --git a/diffcore.h b/diffcore.h
index 66687c3fe5..fcd00bf27a 100644
--- a/diffcore.h
+++ b/diffcore.h
@@ -42,7 +42,9 @@ struct diff_filespec {
 #define DIFF_FILE_VALID(spec) (((spec)->mode) != 0)
 	unsigned should_free : 1; /* data should be free()'ed */
 	unsigned should_munmap : 1; /* data should be munmap()'ed */
-	unsigned dirty_submodule : 1;  /* For submodules: its work tree is dirty */
+	unsigned dirty_submodule : 2;  /* For submodules: its work tree is dirty */
+#define DIRTY_SUBMODULE_UNTRACKED 1
+#define DIRTY_SUBMODULE_MODIFIED  2
 
 	struct userdiff_driver *driver;
 	/* data should be considered "binary"; -1 means "don't know yet" */
diff --git a/dir.c b/dir.c
index cb83332a26..5615f33af1 100644
--- a/dir.c
+++ b/dir.c
@@ -958,9 +958,14 @@ char *get_relative_cwd(char *buffer, int size, const char *dir)
 	}
 	if (*dir)
 		return NULL;
-	if (*cwd == '/')
+	switch (*cwd) {
+	case '\0':
+		return cwd;
+	case '/':
 		return cwd + 1;
-	return cwd;
+	default:
+		return NULL;
+	}
 }
 
 int is_inside_dir(const char *dir)
diff --git a/exec_cmd.c b/exec_cmd.c
index 408e4e55e1..bf225706ee 100644
--- a/exec_cmd.c
+++ b/exec_cmd.c
@@ -28,7 +28,7 @@ const char *system_path(const char *path)
 	    !(prefix = strip_path_suffix(argv0_path, BINDIR)) &&
 	    !(prefix = strip_path_suffix(argv0_path, "git"))) {
 		prefix = PREFIX;
-		fprintf(stderr, "RUNTIME_PREFIX requested, "
+		trace_printf("RUNTIME_PREFIX requested, "
 				"but prefix computation failed.  "
 				"Using static fallback '%s'.\n", prefix);
 	}
@@ -107,7 +107,7 @@ void setup_path(void)
 	if (old_path)
 		strbuf_addstr(&new_path, old_path);
 	else
-		strbuf_addstr(&new_path, "/usr/local/bin:/usr/bin:/bin");
+		strbuf_addstr(&new_path, _PATH_DEFPATH);
 
 	setenv("PATH", new_path.buf, 1);
 
diff --git a/fast-import.c b/fast-import.c
index 74f08bd554..309f2c58a2 100644
--- a/fast-import.c
+++ b/fast-import.c
@@ -980,29 +980,6 @@ static void cycle_packfile(void)
 	start_packfile();
 }
 
-static size_t encode_header(
-	enum object_type type,
-	uintmax_t size,
-	unsigned char *hdr)
-{
-	int n = 1;
-	unsigned char c;
-
-	if (type < OBJ_COMMIT || type > OBJ_REF_DELTA)
-		die("bad type %d", type);
-
-	c = (type << 4) | (size & 15);
-	size >>= 4;
-	while (size) {
-		*hdr++ = c | 0x80;
-		c = size & 0x7f;
-		size >>= 7;
-		n++;
-	}
-	*hdr = c;
-	return n;
-}
-
 static int store_object(
 	enum object_type type,
 	struct strbuf *dat,
@@ -1103,7 +1080,7 @@ static int store_object(
 		delta_count_by_type[type]++;
 		e->depth = last->depth + 1;
 
-		hdrlen = encode_header(OBJ_OFS_DELTA, deltalen, hdr);
+		hdrlen = encode_in_pack_object_header(OBJ_OFS_DELTA, deltalen, hdr);
 		sha1write(pack_file, hdr, hdrlen);
 		pack_size += hdrlen;
 
@@ -1114,7 +1091,7 @@ static int store_object(
 		pack_size += sizeof(hdr) - pos;
 	} else {
 		e->depth = 0;
-		hdrlen = encode_header(type, dat->len, hdr);
+		hdrlen = encode_in_pack_object_header(type, dat->len, hdr);
 		sha1write(pack_file, hdr, hdrlen);
 		pack_size += hdrlen;
 	}
@@ -1188,7 +1165,7 @@ static void stream_blob(uintmax_t len, unsigned char *sha1out, uintmax_t mark)
 	memset(&s, 0, sizeof(s));
 	deflateInit(&s, pack_compression_level);
 
-	hdrlen = encode_header(OBJ_BLOB, len, out_buf);
+	hdrlen = encode_in_pack_object_header(OBJ_BLOB, len, out_buf);
 	if (out_sz <= hdrlen)
 		die("impossibly large object header");
 
diff --git a/git-add--interactive.perl b/git-add--interactive.perl
index 21f1330a5b..27fc79347a 100755
--- a/git-add--interactive.perl
+++ b/git-add--interactive.perl
@@ -1111,9 +1111,9 @@ sub help_patch_cmd {
 	print colored $help_color, <<EOF ;
 y - $verb this hunk$target
 n - do not $verb this hunk$target
-q - quit, do not $verb this hunk nor any of the remaining ones
-a - $verb this and all the remaining hunks in the file
-d - do not $verb this hunk nor any of the remaining hunks in the file
+q - quit; do not $verb this hunk nor any of the remaining ones
+a - $verb this hunk and all later hunks in the file
+d - do not $verb this hunk nor any of the later hunks in the file
 g - select a hunk to go to
 / - search for a hunk matching the given regex
 j - leave this hunk undecided, see next undecided hunk
diff --git a/git-am.sh b/git-am.sh
index 9df951a597..87ffae252b 100755
--- a/git-am.sh
+++ b/git-am.sh
@@ -15,6 +15,8 @@ q,quiet         be quiet
 s,signoff       add a Signed-off-by line to the commit message
 u,utf8          recode into utf8 (default)
 k,keep          pass -k flag to git-mailinfo
+keep-cr         pass --keep-cr flag to git-mailsplit for mbox format
+no-keep-cr      do not pass --keep-cr flag to git-mailsplit independent of am.keepcr
 c,scissors      strip everything before a scissors line
 whitespace=     pass it through git-apply
 ignore-space-change pass it through git-apply
@@ -217,12 +219,12 @@ check_patch_format () {
 split_patches () {
 	case "$patch_format" in
 	mbox)
-		case "$rebasing" in
-		'')
-			keep_cr= ;;
-		?*)
-			keep_cr=--keep-cr ;;
-		esac
+		if test -n "$rebasing" || test t = "$keepcr"
+		then
+		    keep_cr=--keep-cr
+		else
+		    keep_cr=
+		fi
 		git mailsplit -d"$prec" -o"$dotest" -b $keep_cr -- "$@" > "$dotest/last" ||
 		clean_abort
 		;;
@@ -291,13 +293,18 @@ split_patches () {
 
 prec=4
 dotest="$GIT_DIR/rebase-apply"
-sign= utf8=t keep= skip= interactive= resolved= rebasing= abort=
+sign= utf8=t keep= keepcr= skip= interactive= resolved= rebasing= abort=
 resolvemsg= resume= scissors= no_inbody_headers=
 git_apply_opt=
 committer_date_is_author_date=
 ignore_date=
 allow_rerere_autoupdate=
 
+if test "$(git config --bool --get am.keepcr)" = true
+then
+    keepcr=t
+fi
+
 while test $# != 0
 do
 	case "$1" in
@@ -348,6 +355,10 @@ do
 		allow_rerere_autoupdate="$1" ;;
 	-q|--quiet)
 		GIT_QUIET=t ;;
+	--keep-cr)
+		keepcr=t ;;
+	--no-keep-cr)
+		keepcr=f ;;
 	--)
 		shift; break ;;
 	*)
@@ -453,6 +464,7 @@ else
 	echo "$sign" >"$dotest/sign"
 	echo "$utf8" >"$dotest/utf8"
 	echo "$keep" >"$dotest/keep"
+	echo "$keepcr" >"$dotest/keepcr"
 	echo "$scissors" >"$dotest/scissors"
 	echo "$no_inbody_headers" >"$dotest/no_inbody_headers"
 	echo "$GIT_QUIET" >"$dotest/quiet"
@@ -496,6 +508,12 @@ if test "$(cat "$dotest/keep")" = t
 then
 	keep=-k
 fi
+case "$(cat "$dotest/keepcr")" in
+t)
+	keepcr=--keep-cr ;;
+f)
+	keepcr=--no-keep-cr ;;
+esac
 case "$(cat "$dotest/scissors")" in
 t)
 	scissors=--scissors ;;
@@ -575,6 +593,7 @@ do
 			echo "Patch is empty.  Was it split wrong?"
 			stop_here $this
 		}
+		rm -f "$dotest/original-commit"
 		if test -f "$dotest/rebasing" &&
 			commit=$(sed -e 's/^From \([0-9a-f]*\) .*/\1/' \
 				-e q "$dotest/$msgnum") &&
@@ -582,6 +601,7 @@ do
 		then
 			git cat-file commit "$commit" |
 			sed -e '1,/^$/d' >"$dotest/msg-clean"
+			echo "$commit" > "$dotest/original-commit"
 		else
 			{
 				sed -n '/^Subject/ s/Subject: //p' "$dotest/info"
@@ -720,7 +740,7 @@ do
 		;;
 	esac
 
-	if test $apply_status = 1 && test "$threeway" = t
+	if test $apply_status != 0 && test "$threeway" = t
 	then
 		if (fall_back_3way)
 		then
@@ -765,6 +785,10 @@ do
 	git update-ref -m "$GIT_REFLOG_ACTION: $FIRSTLINE" HEAD $commit $parent ||
 	stop_here $this
 
+	if test -f "$dotest/original-commit"; then
+		echo "$(cat "$dotest/original-commit") $commit" >> "$dotest/rewritten"
+	fi
+
 	if test -x "$GIT_DIR"/hooks/post-applypatch
 	then
 		"$GIT_DIR"/hooks/post-applypatch
@@ -773,5 +797,12 @@ do
 	go_next
 done
 
+if test -s "$dotest"/rewritten; then
+    git notes copy --for-rewrite=rebase < "$dotest"/rewritten
+    if test -x "$GIT_DIR"/hooks/post-rewrite; then
+	"$GIT_DIR"/hooks/post-rewrite rebase < "$dotest"/rewritten
+    fi
+fi
+
 rm -fr "$dotest"
 git gc --auto
diff --git a/git-compat-util.h b/git-compat-util.h
index a3c4537366..c0198dde4c 100644
--- a/git-compat-util.h
+++ b/git-compat-util.h
@@ -55,7 +55,8 @@
 # else
 # define _XOPEN_SOURCE 500
 # endif
-#elif !defined(__APPLE__) && !defined(__FreeBSD__)  && !defined(__USLC__) && !defined(_M_UNIX) && !defined(sgi)
+#elif !defined(__APPLE__) && !defined(__FreeBSD__) && !defined(__USLC__) && \
+      !defined(_M_UNIX) && !defined(__sgi) && !defined(__DragonFly__)
 #define _XOPEN_SOURCE 600 /* glibc2 and AIX 5.3L need 500, OpenBSD needs 600 for S_ISLNK() */
 #define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */
 #endif
@@ -163,6 +164,13 @@ extern char *gitbasename(char *);
 #define PATH_SEP ':'
 #endif
 
+#ifdef HAVE_PATHS_H
+#include <paths.h>
+#endif
+#ifndef _PATH_DEFPATH
+#define _PATH_DEFPATH "/usr/local/bin:/usr/bin:/bin"
+#endif
+
 #ifndef STRIP_EXTENSION
 #define STRIP_EXTENSION ""
 #endif
@@ -331,6 +339,7 @@ extern int git_vsnprintf(char *str, size_t maxsize,
 #ifdef __GLIBC_PREREQ
 #if __GLIBC_PREREQ(2, 1)
 #define HAVE_STRCHRNUL
+#define HAVE_MEMPCPY
 #endif
 #endif
 
@@ -344,8 +353,18 @@ static inline char *gitstrchrnul(const char *s, int c)
 }
 #endif
 
+#ifndef HAVE_MEMPCPY
+#define mempcpy gitmempcpy
+static inline void *gitmempcpy(void *dest, const void *src, size_t n)
+{
+	return (char *)memcpy(dest, src, n) + n;
+}
+#endif
+
 extern void release_pack_memory(size_t, int);
 
+extern void set_try_to_free_routine(void (*routine)(size_t));
+
 extern char *xstrdup(const char *str);
 extern void *xmalloc(size_t size);
 extern void *xmallocz(size_t size);
@@ -469,5 +488,14 @@ void git_qsort(void *base, size_t nmemb, size_t size,
  * Always returns the return value of unlink(2).
  */
 int unlink_or_warn(const char *path);
+/*
+ * Likewise for rmdir(2).
+ */
+int rmdir_or_warn(const char *path);
+/*
+ * Calls the correct function out of {unlink,rmdir}_or_warn based on
+ * the supplied file mode.
+ */
+int remove_or_warn(unsigned int mode, const char *path);
 
 #endif
diff --git a/git-cvsimport.perl b/git-cvsimport.perl
index 4853bf7a0d..9e03eee458 100755
--- a/git-cvsimport.perl
+++ b/git-cvsimport.perl
@@ -29,7 +29,7 @@ use IPC::Open2;
 $SIG{'PIPE'}="IGNORE";
 $ENV{'TZ'}="UTC";
 
-our ($opt_h,$opt_o,$opt_v,$opt_k,$opt_u,$opt_d,$opt_p,$opt_C,$opt_z,$opt_i,$opt_P, $opt_s,$opt_m,@opt_M,$opt_A,$opt_S,$opt_L, $opt_a, $opt_r);
+our ($opt_h,$opt_o,$opt_v,$opt_k,$opt_u,$opt_d,$opt_p,$opt_C,$opt_z,$opt_i,$opt_P, $opt_s,$opt_m,@opt_M,$opt_A,$opt_S,$opt_L, $opt_a, $opt_r, $opt_R);
 my (%conv_author_name, %conv_author_email);
 
 sub usage(;$) {
@@ -40,7 +40,7 @@ Usage: git cvsimport     # fetch/update GIT from CVS
        [-o branch-for-HEAD] [-h] [-v] [-d CVSROOT] [-A author-conv-file]
        [-p opts-for-cvsps] [-P file] [-C GIT_repository] [-z fuzz] [-i] [-k]
        [-u] [-s subst] [-a] [-m] [-M regex] [-S regex] [-L commitlimit]
-       [-r remote] [CVS_module]
+       [-r remote] [-R] [CVS_module]
 END
 	exit(1);
 }
@@ -110,7 +110,7 @@ sub read_repo_config {
 	}
 }
 
-my $opts = "haivmkuo:d:p:r:C:z:s:M:P:A:S:L:";
+my $opts = "haivmkuo:d:p:r:C:z:s:M:P:A:S:L:R";
 read_repo_config($opts);
 Getopt::Long::Configure( 'no_ignore_case', 'bundling' );
 
@@ -659,6 +659,11 @@ if ($opt_A) {
 	write_author_info("$git_dir/cvs-authors");
 }
 
+# open .git/cvs-revisions, if requested
+open my $revision_map, '>>', "$git_dir/cvs-revisions"
+    or die "Can't open $git_dir/cvs-revisions for appending: $!\n"
+	if defined $opt_R;
+
 
 #
 # run cvsps into a file unless we are getting
@@ -742,7 +747,7 @@ sub write_tree () {
 }
 
 my ($patchset,$date,$author_name,$author_email,$branch,$ancestor,$tag,$logmsg);
-my (@old,@new,@skipped,%ignorebranch);
+my (@old,@new,@skipped,%ignorebranch,@commit_revisions);
 
 # commits that cvsps cannot place anywhere...
 $ignorebranch{'#CVSPS_NO_BRANCH'} = 1;
@@ -825,6 +830,11 @@ sub commit {
 	system('git' , 'update-ref', "$remote/$branch", $cid) == 0
 		or die "Cannot write branch $branch for update: $!\n";
 
+	if ($revision_map) {
+		print $revision_map "@$_ $cid\n" for @commit_revisions;
+	}
+	@commit_revisions = ();
+
 	if ($tag) {
 	        my ($xtag) = $tag;
 		$xtag =~ s/\s+\*\*.*$//; # Remove stuff like ** INVALID ** and ** FUNKY **
@@ -959,6 +969,7 @@ while (<CVS>) {
 		    push(@skipped, $fn);
 		    next;
 		}
+		push @commit_revisions, [$fn, $rev];
 		print "Fetching $fn   v $rev\n" if $opt_v;
 		my ($tmpname, $size) = $cvs->file($fn,$rev);
 		if ($size == -1) {
@@ -981,7 +992,9 @@ while (<CVS>) {
 		unlink($tmpname);
 	} elsif ($state == 9 and /^\s+(.+?):\d+(?:\.\d+)+->(\d+(?:\.\d+)+)\(DEAD\)\s*$/) {
 		my $fn = $1;
+		my $rev = $2;
 		$fn =~ s#^/+##;
+		push @commit_revisions, [$fn, $rev];
 		push(@old,$fn);
 		print "Delete $fn\n" if $opt_v;
 	} elsif ($state == 9 and /^\s*$/) {
diff --git a/git-instaweb.sh b/git-instaweb.sh
index 6a65f255cc..f6080149c2 100755
--- a/git-instaweb.sh
+++ b/git-instaweb.sh
@@ -212,7 +212,7 @@ server.errorlog = "$fqgitdir/gitweb/error.log"
 # variable above and uncomment this
 #accesslog.filename = "$fqgitdir/gitweb/access.log"
 
-setenv.add-environment = ( "PATH" => "/usr/local/bin:/usr/bin:/bin" )
+setenv.add-environment = ( "PATH" => env.PATH )
 
 cgi.assign = ( ".cgi" => "" )
 
@@ -361,7 +361,7 @@ error_log	$fqgitdir/gitweb/error.log
 access_log	$fqgitdir/gitweb/access.log
 
 #cgi setup
-cgi_env		PATH=/usr/local/bin:/usr/bin:/bin,GIT_DIR=$GIT_DIR,GIT_EXEC_PATH=$GIT_EXEC_PATH
+cgi_env		PATH=$PATH,GIT_DIR=$GIT_DIR,GIT_EXEC_PATH=$GIT_EXEC_PATH
 cgi_interp	$PERL
 cgi_ext		cgi,pl
 
@@ -391,18 +391,20 @@ EOFGITWEB
 gitweb_css () {
 	cat > "$1" <<\EOFGITWEB
 @@GITWEB_CSS@@
+
 EOFGITWEB
 }
 
 gitweb_js () {
 	cat > "$1" <<\EOFGITWEB
 @@GITWEB_JS@@
+
 EOFGITWEB
 }
 
 gitweb_cgi "$GIT_DIR/gitweb/gitweb.cgi"
-gitweb_css "$GIT_DIR/gitweb/gitweb.css"
-gitweb_js  "$GIT_DIR/gitweb/gitweb.js"
+gitweb_css "$GIT_DIR/@@GITWEB_CSS_NAME@@"
+gitweb_js  "$GIT_DIR/@@GITWEB_JS_NAME@@"
 
 case "$httpd" in
 *lighttpd*)
diff --git a/git-parse-remote.sh b/git-parse-remote.sh
index 5f47b18141..5f47b18141 100755..100644
--- a/git-parse-remote.sh
+++ b/git-parse-remote.sh
diff --git a/git-pull.sh b/git-pull.sh
index 246a3a4b37..a09a44ec4c 100755
--- a/git-pull.sh
+++ b/git-pull.sh
@@ -38,11 +38,12 @@ test -z "$(git ls-files -u)" || die_conflict
 test -f "$GIT_DIR/MERGE_HEAD" && die_merge
 
 strategy_args= diffstat= no_commit= squash= no_ff= ff_only=
-log_arg= verbosity=
+log_arg= verbosity= progress=
 merge_args=
 curr_branch=$(git symbolic-ref -q HEAD)
 curr_branch_short="${curr_branch#refs/heads/}"
 rebase=$(git config --bool branch.$curr_branch_short.rebase)
+dry_run=
 while :
 do
 	case "$1" in
@@ -50,6 +51,8 @@ do
 		verbosity="$verbosity -q" ;;
 	-v|--verbose)
 		verbosity="$verbosity -v" ;;
+	--progress)
+		progress=--progress ;;
 	-n|--no-stat|--no-summary)
 		diffstat=--no-stat ;;
 	--stat|--summary)
@@ -102,6 +105,9 @@ do
 	--no-r|--no-re|--no-reb|--no-reba|--no-rebas|--no-rebase)
 		rebase=false
 		;;
+	--d|--dr|--dry|--dry-|--dry-r|--dry-ru|--dry-run)
+		dry_run=--dry-run
+		;;
 	-h|--h|--he|--hel|--help)
 		usage
 		;;
@@ -214,7 +220,8 @@ test true = "$rebase" && {
 	done
 }
 orig_head=$(git rev-parse -q --verify HEAD)
-git fetch $verbosity --update-head-ok "$@" || exit 1
+git fetch $verbosity $progress $dry_run --update-head-ok "$@" || exit 1
+test -z "$dry_run" || exit 0
 
 curr_head=$(git rev-parse -q --verify HEAD)
 if test -n "$orig_head" && test "$curr_head" != "$orig_head"
diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh
index 3e4fd1456f..436b7f5977 100755
--- a/git-rebase--interactive.sh
+++ b/git-rebase--interactive.sh
@@ -20,6 +20,7 @@ v,verbose          display a diffstat of what changed upstream
 onto=              rebase onto given branch instead of upstream
 p,preserve-merges  try to recreate merges instead of ignoring them
 s,strategy=        use the given merge strategy
+no-ff              cherry-pick all commits, even if unchanged
 m,merge            always used (no-op)
 i,interactive      always used (no-op)
  Actions:
@@ -96,6 +97,13 @@ AUTHOR_SCRIPT="$DOTEST"/author-script
 # command is processed, this file is deleted.
 AMEND="$DOTEST"/amend
 
+# For the post-rewrite hook, we make a list of rewritten commits and
+# their new sha1s.  The rewritten-pending list keeps the sha1s of
+# commits that have been processed, but not committed yet,
+# e.g. because they are waiting for a 'squash' command.
+REWRITTEN_LIST="$DOTEST"/rewritten-list
+REWRITTEN_PENDING="$DOTEST"/rewritten-pending
+
 PRESERVE_MERGES=
 STRATEGY=
 ONTO=
@@ -103,6 +111,7 @@ VERBOSE=
 OK_TO_SKIP_PRE_REBASE=
 REBASE_ROOT=
 AUTOSQUASH=
+NEVER_FF=
 
 GIT_CHERRY_PICK_HELP="  After resolving the conflicts,
 mark the corrected paths with 'git add <paths>', and
@@ -198,6 +207,7 @@ make_patch () {
 }
 
 die_with_patch () {
+	echo "$1" > "$DOTEST"/stopped-sha
 	make_patch "$1"
 	git rerere
 	die "$2"
@@ -222,8 +232,9 @@ do_with_author () {
 }
 
 pick_one () {
-	no_ff=
-	case "$1" in -n) sha1=$2; no_ff=t ;; *) sha1=$1 ;; esac
+	ff=--ff
+	case "$1" in -n) sha1=$2; ff= ;; *) sha1=$1 ;; esac
+	case "$NEVER_FF" in '') ;; ?*) ff= ;; esac
 	output git rev-parse --verify $sha1 || die "Invalid commit name: $sha1"
 	test -d "$REWRITTEN" &&
 		pick_one_preserving_merges "$@" && return
@@ -232,16 +243,7 @@ pick_one () {
 		output git cherry-pick "$@"
 		return
 	fi
-	parent_sha1=$(git rev-parse --verify $sha1^) ||
-		die "Could not get the parent of $sha1"
-	current_sha1=$(git rev-parse --verify HEAD)
-	if test -z "$no_ff" && test "$current_sha1" = "$parent_sha1"
-	then
-		output git reset --hard $sha1
-		output warn Fast-forward to $(git rev-parse --short $sha1)
-	else
-		output git cherry-pick "$@"
-	fi
+	output git cherry-pick $ff "$@"
 }
 
 pick_one_preserving_merges () {
@@ -348,6 +350,7 @@ pick_one_preserving_merges () {
 				printf "%s\n" "$msg" > "$GIT_DIR"/MERGE_MSG
 				die_with_patch $sha1 "Error redoing merge $sha1"
 			fi
+			echo "$sha1 $(git rev-parse HEAD^0)" >> "$REWRITTEN_LIST"
 			;;
 		*)
 			output git cherry-pick "$@" ||
@@ -425,6 +428,26 @@ die_failed_squash() {
 	die_with_patch $1 ""
 }
 
+flush_rewritten_pending() {
+	test -s "$REWRITTEN_PENDING" || return
+	newsha1="$(git rev-parse HEAD^0)"
+	sed "s/$/ $newsha1/" < "$REWRITTEN_PENDING" >> "$REWRITTEN_LIST"
+	rm -f "$REWRITTEN_PENDING"
+}
+
+record_in_rewritten() {
+	oldsha1="$(git rev-parse $1)"
+	echo "$oldsha1" >> "$REWRITTEN_PENDING"
+
+	case "$(peek_next_command)" in
+	    squash|s|fixup|f)
+		;;
+	    *)
+		flush_rewritten_pending
+		;;
+	esac
+}
+
 do_next () {
 	rm -f "$MSG" "$AUTHOR_SCRIPT" "$AMEND" || exit
 	read command sha1 rest < "$TODO"
@@ -438,6 +461,7 @@ do_next () {
 		mark_action_done
 		pick_one $sha1 ||
 			die_with_patch $sha1 "Could not apply $sha1... $rest"
+		record_in_rewritten $sha1
 		;;
 	reword|r)
 		comment_for_reflog reword
@@ -445,7 +469,8 @@ do_next () {
 		mark_action_done
 		pick_one $sha1 ||
 			die_with_patch $sha1 "Could not apply $sha1... $rest"
-		git commit --amend
+		git commit --amend --no-post-rewrite
+		record_in_rewritten $sha1
 		;;
 	edit|e)
 		comment_for_reflog edit
@@ -453,6 +478,7 @@ do_next () {
 		mark_action_done
 		pick_one $sha1 ||
 			die_with_patch $sha1 "Could not apply $sha1... $rest"
+		echo "$sha1" > "$DOTEST"/stopped-sha
 		make_patch $sha1
 		git rev-parse --verify HEAD > "$AMEND"
 		warn "Stopped at $sha1... $rest"
@@ -509,6 +535,7 @@ do_next () {
 			rm -f "$SQUASH_MSG" "$FIXUP_MSG"
 			;;
 		esac
+		record_in_rewritten $sha1
 		;;
 	*)
 		warn "Unknown command: $command $sha1 $rest"
@@ -537,6 +564,16 @@ do_next () {
 		test ! -f "$DOTEST"/verbose ||
 			git diff-tree --stat $(cat "$DOTEST"/head)..HEAD
 	} &&
+	{
+		test -s "$REWRITTEN_LIST" &&
+		git notes copy --for-rewrite=rebase < "$REWRITTEN_LIST" ||
+		true # we don't care if this copying failed
+	} &&
+	if test -x "$GIT_DIR"/hooks/post-rewrite &&
+		test -s "$REWRITTEN_LIST"; then
+		"$GIT_DIR"/hooks/post-rewrite rebase < "$REWRITTEN_LIST"
+		true # we don't care if this hook failed
+	fi &&
 	rm -rf "$DOTEST" &&
 	git gc --auto &&
 	warn "Successfully rebased and updated $HEADNAME."
@@ -571,7 +608,12 @@ skip_unnecessary_picks () {
 		esac
 		echo "$command${sha1:+ }$sha1${rest:+ }$rest" >&$fd
 	done <"$TODO" >"$TODO.new" 3>>"$DONE" &&
-	mv -f "$TODO".new "$TODO" ||
+	mv -f "$TODO".new "$TODO" &&
+	case "$(peek_next_command)" in
+	squash|s|fixup|f)
+		record_in_rewritten "$ONTO"
+		;;
+	esac ||
 	die "Could not skip unnecessary pick commands"
 }
 
@@ -687,6 +729,8 @@ first and then run 'git rebase --continue' again."
 			}
 		fi
 
+		record_in_rewritten "$(cat "$DOTEST"/stopped-sha)"
+
 		require_clean_work_tree
 		do_rest
 		;;
@@ -742,6 +786,9 @@ first and then run 'git rebase --continue' again."
 	-i)
 		# yeah, we know
 		;;
+	--no-ff)
+		NEVER_FF=t
+		;;
 	--root)
 		REBASE_ROOT=t
 		;;
@@ -783,8 +830,6 @@ first and then run 'git rebase --continue' again."
 
 		if test ! -z "$1"
 		then
-			output git show-ref --verify --quiet "refs/heads/$1" ||
-				die "Invalid branchname: $1"
 			output git checkout "$1" ||
 				die "Could not checkout $1"
 		fi
@@ -927,7 +972,7 @@ EOF
 		has_action "$TODO" ||
 			die_abort "Nothing to do"
 
-		test -d "$REWRITTEN" || skip_unnecessary_picks
+		test -d "$REWRITTEN" || test -n "$NEVER_FF" || skip_unnecessary_picks
 
 		git update-ref ORIG_HEAD $HEAD
 		output git checkout $ONTO && do_rest
diff --git a/git-rebase.sh b/git-rebase.sh
index fb4fef7b1d..44f5c65fdb 100755
--- a/git-rebase.sh
+++ b/git-rebase.sh
@@ -3,7 +3,7 @@
 # Copyright (c) 2005 Junio C Hamano.
 #
 
-USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--onto <newbase>] [<upstream>|--root] [<branch>] [--quiet | -q]'
+USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] [<upstream>|--root] [<branch>] [--quiet | -q]'
 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
 same name.  When the --onto option is provided the new branch starts
 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
@@ -79,6 +79,7 @@ continue_merge () {
 		then
 			printf "Committed: %0${prec}d " $msgnum
 		fi
+		echo "$cmt $(git rev-parse HEAD^0)" >> "$dotest/rewritten"
 	else
 		if test -z "$GIT_QUIET"
 		then
@@ -151,6 +152,11 @@ move_to_original_branch () {
 
 finish_rb_merge () {
 	move_to_original_branch
+	git notes copy --for-rewrite=rebase < "$dotest"/rewritten
+	if test -x "$GIT_DIR"/hooks/post-rewrite &&
+		test -s "$dotest"/rewritten; then
+		"$GIT_DIR"/hooks/post-rewrite rebase < "$dotest"/rewritten
+	fi
 	rm -r "$dotest"
 	say All done.
 }
@@ -347,7 +353,7 @@ do
 	--root)
 		rebase_root=t
 		;;
-	-f|--f|--fo|--for|--forc|force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase)
+	-f|--f|--fo|--for|--forc|force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase|--no-ff)
 		force_rebase=t
 		;;
 	--rerere-autoupdate|--no-rerere-autoupdate)
diff --git a/git-request-pull.sh b/git-request-pull.sh
index 630ceddf03..8fd15f6df4 100755
--- a/git-request-pull.sh
+++ b/git-request-pull.sh
@@ -65,11 +65,11 @@ if [ -z "$branch" ]; then
 	status=1
 fi
 
-echo "The following changes since commit $baserev:"
-git shortlog --max-count=1 $baserev | sed -e 's/^\(.\)/  \1/'
+git show -s --format='The following changes since commit %H:
 
-echo "are available in the git repository at:"
-echo
+  %s (%ci)
+
+are available in the git repository at:' $baserev
 echo "  $url $branch"
 echo
 
diff --git a/git-send-email.perl b/git-send-email.perl
index 1b99f40390..111c981229 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -47,9 +47,9 @@ git send-email [options] <file | directory | rev-list options >
 
   Composing:
     --from                  <str>  * Email From:
-    --to                    <str>  * Email To:
-    --cc                    <str>  * Email Cc:
-    --bcc                   <str>  * Email Bcc:
+    --[no-]to               <str>  * Email To:
+    --[no-]cc               <str>  * Email Cc:
+    --[no-]bcc              <str>  * Email Bcc:
     --subject               <str>  * Email "Subject:"
     --in-reply-to           <str>  * Email "In-Reply-To:"
     --annotate                     * Review each patch that will be sent in an editor.
@@ -64,6 +64,8 @@ git send-email [options] <file | directory | rev-list options >
     --smtp-pass             <str>  * Password for SMTP-AUTH; not necessary.
     --smtp-encryption       <str>  * tls or ssl; anything else disables.
     --smtp-ssl                     * Deprecated. Use '--smtp-encryption ssl'.
+    --smtp-domain           <str>  * The domain name sent to HELO/EHLO handshake
+    --smtp-debug            <0|1>  * Disable, enable Net::SMTP debug.
 
   Automating:
     --identity              <str>  * Use the sendemail.<id> options.
@@ -135,7 +137,7 @@ sub unique_email_list(@);
 sub cleanup_compose_files();
 
 # Variables we fill in automatically, or via prompting:
-my (@to,@cc,@initial_cc,@bcclist,@xh,
+my (@to,$no_to,@cc,$no_cc,@initial_cc,@bcclist,$no_bcc,@xh,
 	$initial_reply_to,$initial_subject,@files,
 	$author,$sender,$smtp_authpass,$annotate,$compose,$time);
 
@@ -186,10 +188,12 @@ sub do_edit {
 # Variables with corresponding config settings
 my ($thread, $chain_reply_to, $suppress_from, $signed_off_by_cc, $cc_cmd);
 my ($smtp_server, $smtp_server_port, $smtp_authuser, $smtp_encryption);
-my ($identity, $aliasfiletype, @alias_files, @smtp_host_parts);
+my ($identity, $aliasfiletype, @alias_files, @smtp_host_parts, $smtp_domain);
 my ($validate, $confirm);
 my (@suppress_cc);
 
+my ($debug_net_smtp) = 0;		# Net::SMTP, see send_message()
+
 my $not_set_by_user = "true but not set by the user";
 
 my %config_bool_settings = (
@@ -206,6 +210,7 @@ my %config_settings = (
     "smtpserverport" => \$smtp_server_port,
     "smtpuser" => \$smtp_authuser,
     "smtppass" => \$smtp_authpass,
+	"smtpdomain" => \$smtp_domain,
     "to" => \@to,
     "cc" => \@initial_cc,
     "cccmd" => \$cc_cmd,
@@ -264,8 +269,11 @@ my $rc = GetOptions("sender|from=s" => \$sender,
                     "in-reply-to=s" => \$initial_reply_to,
 		    "subject=s" => \$initial_subject,
 		    "to=s" => \@to,
+		    "no-to" => \$no_to,
 		    "cc=s" => \@initial_cc,
+		    "no-cc" => \$no_cc,
 		    "bcc=s" => \@bcclist,
+		    "no-bcc" => \$no_bcc,
 		    "chain-reply-to!" => \$chain_reply_to,
 		    "smtp-server=s" => \$smtp_server,
 		    "smtp-server-port=s" => \$smtp_server_port,
@@ -273,6 +281,8 @@ my $rc = GetOptions("sender|from=s" => \$sender,
 		    "smtp-pass:s" => \$smtp_authpass,
 		    "smtp-ssl" => sub { $smtp_encryption = 'ssl' },
 		    "smtp-encryption=s" => \$smtp_encryption,
+		    "smtp-debug:i" => \$debug_net_smtp,
+		    "smtp-domain:s" => \$smtp_domain,
 		    "identity=s" => \$identity,
 		    "annotate" => \$annotate,
 		    "compose" => \$compose,
@@ -308,6 +318,9 @@ sub read_config {
 
 	foreach my $setting (keys %config_settings) {
 		my $target = $config_settings{$setting};
+		next if $setting eq "to" and defined $no_to;
+		next if $setting eq "cc" and defined $no_cc;
+		next if $setting eq "bcc" and defined $no_bcc;
 		if (ref($target) eq "ARRAY") {
 			unless (@$target) {
 				my @values = Git::config(@repo, "$prefix.$setting");
@@ -747,8 +760,7 @@ sub extract_valid_address {
 # We'll setup a template for the message id, using the "from" address:
 
 my ($message_id_stamp, $message_id_serial);
-sub make_message_id
-{
+sub make_message_id {
 	my $uniq;
 	if (!defined $message_id_stamp) {
 		$message_id_stamp = sprintf("%s-%s", time, $$);
@@ -803,8 +815,7 @@ sub is_rfc2047_quoted {
 }
 
 # use the simplest quoting being able to handle the recipient
-sub sanitize_address
-{
+sub sanitize_address {
 	my ($recipient) = @_;
 	my ($recipient_name, $recipient_addr) = ($recipient =~ /^(.*?)\s*(<.*)/);
 
@@ -833,12 +844,67 @@ sub sanitize_address
 
 }
 
+# Returns the local Fully Qualified Domain Name (FQDN) if available.
+#
+# Tightly configured MTAa require that a caller sends a real DNS
+# domain name that corresponds the IP address in the HELO/EHLO
+# handshake. This is used to verify the connection and prevent
+# spammers from trying to hide their identity. If the DNS and IP don't
+# match, the receiveing MTA may deny the connection.
+#
+# Here is a deny example of Net::SMTP with the default "localhost.localdomain"
+#
+# Net::SMTP=GLOB(0x267ec28)>>> EHLO localhost.localdomain
+# Net::SMTP=GLOB(0x267ec28)<<< 550 EHLO argument does not match calling host
+#
+# This maildomain*() code is based on ideas in Perl library Test::Reporter
+# /usr/share/perl5/Test/Reporter/Mail/Util.pm ==> sub _maildomain ()
+
+sub valid_fqdn {
+	my $domain = shift;
+	return !($^O eq 'darwin' && $domain =~ /\.local$/) && $domain =~ /\./;
+}
+
+sub maildomain_net {
+	my $maildomain;
+
+	if (eval { require Net::Domain; 1 }) {
+		my $domain = Net::Domain::domainname();
+		$maildomain = $domain if valid_fqdn($domain);
+	}
+
+	return $maildomain;
+}
+
+sub maildomain_mta {
+	my $maildomain;
+
+	if (eval { require Net::SMTP; 1 }) {
+		for my $host (qw(mailhost localhost)) {
+			my $smtp = Net::SMTP->new($host);
+			if (defined $smtp) {
+				my $domain = $smtp->domain;
+				$smtp->quit;
+
+				$maildomain = $domain if valid_fqdn($domain);
+
+				last if $maildomain;
+			}
+		}
+	}
+
+	return $maildomain;
+}
+
+sub maildomain {
+	return maildomain_net() || maildomain_mta() || 'localhost.localdomain';
+}
+
 # Returns 1 if the message was sent, and 0 otherwise.
 # In actuality, the whole program dies when there
 # is an error sending a message.
 
-sub send_message
-{
+sub send_message {
 	my @recipients = unique_email_list(@to);
 	@cc = (grep { my $cc = extract_valid_address($_);
 		      not grep { $cc eq $_ } @recipients
@@ -935,13 +1001,19 @@ X-Mailer: git-send-email $gitversion
 		if ($smtp_encryption eq 'ssl') {
 			$smtp_server_port ||= 465; # ssmtp
 			require Net::SMTP::SSL;
-			$smtp ||= Net::SMTP::SSL->new($smtp_server, Port => $smtp_server_port);
+			$smtp_domain ||= maildomain();
+			$smtp ||= Net::SMTP::SSL->new($smtp_server,
+						      Hello => $smtp_domain,
+						      Port => $smtp_server_port);
 		}
 		else {
 			require Net::SMTP;
+			$smtp_domain ||= maildomain();
 			$smtp ||= Net::SMTP->new((defined $smtp_server_port)
 						 ? "$smtp_server:$smtp_server_port"
-						 : $smtp_server);
+						 : $smtp_server,
+						 Hello => $smtp_domain,
+						 Debug => $debug_net_smtp);
 			if ($smtp_encryption eq 'tls' && $smtp) {
 				require Net::SMTP::SSL;
 				$smtp->command('STARTTLS');
@@ -960,7 +1032,11 @@ X-Mailer: git-send-email $gitversion
 		}
 
 		if (!$smtp) {
-			die "Unable to initialize SMTP properly.  Is there something wrong with your config?";
+			die "Unable to initialize SMTP properly. Check config and use --smtp-debug. ",
+			    "VALUES: server=$smtp_server ",
+			    "encryption=$smtp_encryption ",
+			    "hello=$smtp_domain",
+			    defined $smtp_server_port ? "port=$smtp_server_port" : "";
 		}
 
 		if (defined $smtp_authuser) {
diff --git a/git-sh-setup.sh b/git-sh-setup.sh
index 6131670860..6131670860 100755..100644
--- a/git-sh-setup.sh
+++ b/git-sh-setup.sh
diff --git a/git-stash.sh b/git-stash.sh
index 59db3dc38e..0f858d334c 100755
--- a/git-stash.sh
+++ b/git-stash.sh
@@ -86,7 +86,7 @@ create_stash () {
 			GIT_INDEX_FILE="$TMP-index" &&
 			export GIT_INDEX_FILE &&
 			git read-tree -m $i_tree &&
-			git add -u &&
+			git diff --name-only -z HEAD | git update-index -z --add --remove --stdin &&
 			git write-tree &&
 			rm -f "$TMP-index"
 		) ) ||
diff --git a/git-submodule.sh b/git-submodule.sh
index e2082fd149..3319b836b2 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -21,6 +21,8 @@ command=
 branch=
 reference=
 cached=
+recursive=
+init=
 files=
 nofetch=
 update=
@@ -553,12 +555,17 @@ cmd_summary() {
 
 	test $summary_limit = 0 && return
 
-	if rev=$(git rev-parse -q --verify "$1^0")
+	if rev=$(git rev-parse -q --verify --default HEAD ${1+"$1"})
 	then
 		head=$rev
-		shift
+		test $# = 0 || shift
+	elif test -z "$1" -o "$1" = "HEAD"
+	then
+		# before the first commit: compare with an empty tree
+		head=$(git hash-object -w -t tree --stdin </dev/null)
+		test -z "$1" || shift
 	else
-		head=HEAD
+		head="HEAD"
 	fi
 
 	if [ -n "$files" ]
diff --git a/git-svn.perl b/git-svn.perl
index 473a0b9d55..2c86ea2e38 100755
--- a/git-svn.perl
+++ b/git-svn.perl
@@ -36,11 +36,13 @@ $ENV{TZ} = 'UTC';
 $| = 1; # unbuffer STDOUT
 
 sub fatal (@) { print STDERR "@_\n"; exit 1 }
-require SVN::Core; # use()-ing this causes segfaults for me... *shrug*
-require SVN::Ra;
-require SVN::Delta;
-if ($SVN::Core::VERSION lt '1.1.0') {
-	fatal "Need SVN::Core 1.1.0 or better (got $SVN::Core::VERSION)";
+sub _req_svn {
+	require SVN::Core; # use()-ing this causes segfaults for me... *shrug*
+	require SVN::Ra;
+	require SVN::Delta;
+	if ($SVN::Core::VERSION lt '1.1.0') {
+		fatal "Need SVN::Core 1.1.0 or better (got $SVN::Core::VERSION)";
+	}
 }
 my $can_compress = eval { require Compress::Zlib; 1};
 push @Git::SVN::Ra::ISA, 'SVN::Ra';
@@ -349,6 +351,7 @@ information.
 }
 
 sub version {
+	::_req_svn();
 	print "git-svn version $VERSION (svn $SVN::Core::VERSION)\n";
 	exit 0;
 }
@@ -367,7 +370,6 @@ sub do_git_init_db {
 		command_noisy(@init_db);
 		$_repository = Git->repository(Repository => ".git");
 	}
-	command_noisy('config', 'core.autocrlf', 'false');
 	my $set;
 	my $pfx = "svn-remote.$Git::SVN::default_repo_id";
 	foreach my $i (keys %icv) {
@@ -730,6 +732,8 @@ sub cmd_branch {
 		$src=~s/^http:/https:/;
 	}
 
+	::_req_svn();
+
 	my $ctx = SVN::Client->new(
 		auth    => Git::SVN::Ra::_auth_providers(),
 		log_msg => sub {
@@ -1098,6 +1102,7 @@ sub cmd_info {
 	if ($@) {
 		$result .= "Repository Root: (offline)\n";
 	}
+	::_req_svn();
 	$result .= "Repository UUID: $uuid\n" unless $diff_status eq "A" &&
 		($SVN::Core::VERSION le '1.5.4' || $file_type ne "dir");
 	$result .= "Revision: " . ($diff_status eq "A" ? 0 : $rev) . "\n";
@@ -2993,7 +2998,7 @@ sub find_extra_svk_parents {
 	for my $ticket ( @tickets ) {
 		my ($uuid, $path, $rev) = split /:/, $ticket;
 		if ( $uuid eq $self->ra_uuid ) {
-			my $url = $self->rewrite_root || $self->{url};
+			my $url = $self->{url};
 			my $repos_root = $url;
 			my $branch_from = $path;
 			$branch_from =~ s{^/}{};
@@ -3201,7 +3206,7 @@ sub find_extra_svn_parents {
 	# are now marked as merge, we can add the tip as a parent.
 	my @merges = split "\n", $mergeinfo;
 	my @merge_tips;
-	my $url = $self->rewrite_root || $self->{url};
+	my $url = $self->{url};
 	my $uuid = $self->ra_uuid;
 	my %ranges;
 	for my $merge ( @merges ) {
@@ -3273,7 +3278,7 @@ sub find_extra_svn_parents {
 					"$new_parents[$i]..$new_parents[$j]",
 				       );
 				if ( !$revs ) {
-					undef($new_parents[$i]);
+					undef($new_parents[$j]);
 				}
 			}
 		}
@@ -3966,18 +3971,25 @@ sub username {
 
 sub _read_password {
 	my ($prompt, $realm) = @_;
-	print STDERR $prompt;
-	STDERR->flush;
-	require Term::ReadKey;
-	Term::ReadKey::ReadMode('noecho');
 	my $password = '';
-	while (defined(my $key = Term::ReadKey::ReadKey(0))) {
-		last if $key =~ /[\012\015]/; # \n\r
-		$password .= $key;
+	if (exists $ENV{GIT_ASKPASS}) {
+		open(PH, "-|", $ENV{GIT_ASKPASS}, $prompt);
+		$password = <PH>;
+		$password =~ s/[\012\015]//; # \n\r
+		close(PH);
+	} else {
+		print STDERR $prompt;
+		STDERR->flush;
+		require Term::ReadKey;
+		Term::ReadKey::ReadMode('noecho');
+		while (defined(my $key = Term::ReadKey::ReadKey(0))) {
+			last if $key =~ /[\012\015]/; # \n\r
+			$password .= $key;
+		}
+		Term::ReadKey::ReadMode('restore');
+		print STDERR "\n";
+		STDERR->flush;
 	}
-	Term::ReadKey::ReadMode('restore');
-	print STDERR "\n";
-	STDERR->flush;
 	$password;
 }
 
@@ -4859,6 +4871,8 @@ sub new {
 	$url =~ s!/+$!!;
 	return $RA if ($RA && $RA->{url} eq $url);
 
+	::_req_svn();
+
 	SVN::_Core::svn_config_ensure($config_dir, undef);
 	my ($baton, $callbacks) = SVN::Core::auth_open_helper(_auth_providers);
 	my $config = SVN::Core::config_get_config($config_dir);
diff --git a/git.c b/git.c
index c445d7bcc2..6bae30545b 100644
--- a/git.c
+++ b/git.c
@@ -54,6 +54,9 @@ static int handle_options(const char ***argv, int *argc, int *envchanged)
 {
 	int handled = 0;
 
+	if (!getenv("GIT_ASKPASS") && getenv("SSH_ASKPASS"))
+		setenv("GIT_ASKPASS", getenv("SSH_ASKPASS"), 1);
+
 	while (*argc > 0) {
 		const char *cmd = (*argv)[0];
 		if (cmd[0] != '-')
@@ -317,7 +320,7 @@ static void handle_internal_command(int argc, const char **argv)
 		{ "fsck-objects", cmd_fsck, RUN_SETUP },
 		{ "gc", cmd_gc, RUN_SETUP },
 		{ "get-tar-commit-id", cmd_get_tar_commit_id },
-		{ "grep", cmd_grep, RUN_SETUP | USE_PAGER },
+		{ "grep", cmd_grep, USE_PAGER },
 		{ "hash-object", cmd_hash_object },
 		{ "help", cmd_help },
 		{ "index-pack", cmd_index_pack },
@@ -343,6 +346,7 @@ static void handle_internal_command(int argc, const char **argv)
 		{ "mktree", cmd_mktree, RUN_SETUP },
 		{ "mv", cmd_mv, RUN_SETUP | NEED_WORK_TREE },
 		{ "name-rev", cmd_name_rev, RUN_SETUP },
+		{ "notes", cmd_notes, RUN_SETUP },
 		{ "pack-objects", cmd_pack_objects, RUN_SETUP },
 		{ "pack-redundant", cmd_pack_redundant, RUN_SETUP },
 		{ "patch-id", cmd_patch_id },
diff --git a/git.spec.in b/git.spec.in
index ee74a5eed7..9533147ff2 100644
--- a/git.spec.in
+++ b/git.spec.in
@@ -127,6 +127,9 @@ find $RPM_BUILD_ROOT -type f -name perllocal.pod -exec rm -f {} ';'
 rm -rf $RPM_BUILD_ROOT%{_mandir}
 %endif
 
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/bash_completion.d
+install -m 644 -T contrib/completion/git-completion.bash $RPM_BUILD_ROOT%{_sysconfdir}/bash_completion.d/git
+
 %clean
 rm -rf $RPM_BUILD_ROOT
 
@@ -136,6 +139,7 @@ rm -rf $RPM_BUILD_ROOT
 %doc README COPYING Documentation/*.txt
 %{!?_without_docs: %doc Documentation/*.html Documentation/howto}
 %{!?_without_docs: %doc Documentation/technical}
+%{_sysconfdir}/bash_completion.d
 
 %files svn
 %defattr(-,root,root)
@@ -192,6 +196,9 @@ rm -rf $RPM_BUILD_ROOT
 # No files for you!
 
 %changelog
+* Fri Mar 26 2010 Ian Ward Comfort <icomfort@stanford.edu>
+- Ship bash completion support from contrib/ in the core package.
+
 * Sun Jan 31 2010 Junio C Hamano <gitster@pobox.com>
 - Do not use %define inside %{!?...} construct.
 
diff --git a/gitk-git/gitk b/gitk-git/gitk
index 1f36a3e815..1b0e09a561 100644
--- a/gitk-git/gitk
+++ b/gitk-git/gitk
@@ -1877,8 +1877,11 @@ proc setoptions {} {
     option add *Menubutton.font uifont startupFile
     option add *Label.font uifont startupFile
     option add *Message.font uifont startupFile
-    option add *Entry.font uifont startupFile
+    option add *Entry.font textfont startupFile
+    option add *Text.font textfont startupFile
     option add *Labelframe.font uifont startupFile
+    option add *Spinbox.font textfont startupFile
+    option add *Listbox.font mainfont startupFile
 }
 
 # Make a menu and submenus.
@@ -2174,7 +2177,7 @@ proc makewindow {} {
     set findstring {}
     set fstring .tf.lbar.findstring
     lappend entries $fstring
-    ${NS}::entry $fstring -width 30 -font textfont -textvariable findstring
+    ${NS}::entry $fstring -width 30 -textvariable findstring
     trace add variable findstring write find_change
     set findtype [mc "Exact"]
     set findtypemenu [makedroplist .tf.lbar.findtype \
@@ -2217,7 +2220,7 @@ proc makewindow {} {
     pack .bleft.top.search -side left -padx 5
     set sstring .bleft.top.sstring
     set searchstring ""
-    ${NS}::entry $sstring -width 20 -font textfont -textvariable searchstring
+    ${NS}::entry $sstring -width 20 -textvariable searchstring
     lappend entries $sstring
     trace add variable searchstring write incrsearch
     pack $sstring -side left -expand 1 -fill x
@@ -2229,7 +2232,7 @@ proc makewindow {} {
 	-command changediffdisp -variable diffelide -value {1 0}
     ${NS}::label .bleft.mid.labeldiffcontext -text "      [mc "Lines of context"]: "
     pack .bleft.mid.diff .bleft.mid.old .bleft.mid.new -side left
-    spinbox .bleft.mid.diffcontext -width 5 -font textfont \
+    spinbox .bleft.mid.diffcontext -width 5 \
 	-from 0 -increment 1 -to 10000000 \
 	-validate all -validatecommand "diffcontextvalidate %P" \
 	-textvariable diffcontextstring
@@ -2383,6 +2386,8 @@ proc makewindow {} {
     }
     bindall <$::BM> "canvscan mark %W %x %y"
     bindall <B$::BM-Motion> "canvscan dragto %W %x %y"
+    bind all <$M1B-Key-w> {destroy [winfo toplevel %W]}
+    bind . <$M1B-Key-w> doquit
     bindkey <Home> selfirstline
     bindkey <End> sellastline
     bind . <Key-Up> "selnextline -1"
@@ -2782,7 +2787,7 @@ proc about {} {
     message $w.m -text [mc "
 Gitk - a commit viewer for git
 
-Copyright © 2005-2009 Paul Mackerras
+Copyright \u00a9 2005-2010 Paul Mackerras
 
 Use and redistribute under the terms of the GNU General Public License"] \
 	    -justify center -aspect 400 -border 2 -bg white -relief groove
@@ -2814,6 +2819,7 @@ proc keys {} {
 [mc "Gitk key bindings:"]
 
 [mc "<%s-Q>		Quit" $M1T]
+[mc "<%s-W>		Close window" $M1T]
 [mc "<Home>		Move to first commit"]
 [mc "<End>		Move to last commit"]
 [mc "<Up>, p, i	Move up one commit"]
@@ -3805,10 +3811,10 @@ proc newview {ishighlight} {
 	raise $top
 	return
     }
+    decode_view_opts $nextviewnum $revtreeargs
     set newviewname($nextviewnum) "[mc "View"] $nextviewnum"
     set newviewopts($nextviewnum,perm) 0
     set newviewopts($nextviewnum,cmd)  $viewargscmd($curview)
-    decode_view_opts $nextviewnum $revtreeargs
     vieweditor $top $nextviewnum [mc "Gitk view definition"]
 }
 
@@ -3845,6 +3851,7 @@ set known_view_options {
     {cmd       t50= +  {}               {mc "Command to generate more commits to include:"}}
     }
 
+# Convert $newviewopts($n, ...) into args for git log.
 proc encode_view_opts {n} {
     global known_view_options newviewopts
 
@@ -3878,6 +3885,7 @@ proc encode_view_opts {n} {
     return [concat $rargs [shellsplit $newviewopts($n,args)]]
 }
 
+# Fill $newviewopts($n, ...) based on args for git log.
 proc decode_view_opts {n view_args} {
     global known_view_options newviewopts
 
@@ -3960,10 +3968,10 @@ proc editview {} {
 	raise $top
 	return
     }
+    decode_view_opts $curview $viewargs($curview)
     set newviewname($curview)      $viewname($curview)
     set newviewopts($curview,perm) $viewperm($curview)
     set newviewopts($curview,cmd)  $viewargscmd($curview)
-    decode_view_opts $curview $viewargs($curview)
     vieweditor $top $curview "[mc "Gitk: edit view"] $viewname($curview)"
 }
 
@@ -4037,7 +4045,7 @@ proc vieweditor {top n title} {
 	} elseif {$type eq "path"} {
 	    ${NS}::label $top.l -text $title
 	    pack $top.l -in $top -side top -pady [list 3 0] -anchor w -padx 3
-	    text $top.t -width 40 -height 5 -background $bgcolor -font uifont
+	    text $top.t -width 40 -height 5 -background $bgcolor
 	    if {[info exists viewfiles($n)]} {
 		foreach f $viewfiles($n) {
 		    $top.t insert end $f
@@ -7501,7 +7509,7 @@ proc getblobdiffs {ids} {
     global ignorespace
     global limitdiffs vfilelimit curview
     global diffencoding targetline diffnparents
-    global git_version
+    global git_version currdiffsubmod
 
     set textconv {}
     if {[package vcompare $git_version "1.6.1"] >= 0} {
@@ -7528,6 +7536,7 @@ proc getblobdiffs {ids} {
     set diffencoding [get_path_encoding {}]
     fconfigure $bdf -blocking 0 -encoding binary -eofchar {}
     set blobdifffd($ids) $bdf
+    set currdiffsubmod ""
     filerun $bdf [list getblobdiffline $bdf $diffids]
 }
 
@@ -7598,7 +7607,7 @@ proc getblobdiffline {bdf ids} {
     global diffnexthead diffnextnote difffilestart
     global ctext_file_names ctext_file_lines
     global diffinhdr treediffs mergemax diffnparents
-    global diffencoding jump_to_here targetline diffline
+    global diffencoding jump_to_here targetline diffline currdiffsubmod
 
     set nr 0
     $ctext conf -state normal
@@ -7679,19 +7688,30 @@ proc getblobdiffline {bdf ids} {
 
 	} elseif {![string compare -length 10 "Submodule " $line]} {
 	    # start of a new submodule
-	    if {[string compare [$ctext get "end - 4c" end] "\n \n\n"]} {
+	    if {[regexp -indices "\[0-9a-f\]+\\.\\." $line nameend]} {
+		set fname [string range $line 10 [expr [lindex $nameend 0] - 2]]
+	    } else {
+		set fname [string range $line 10 [expr [string first "contains " $line] - 2]]
+	    }
+	    if {$currdiffsubmod != $fname} {
 		$ctext insert end "\n";     # Add newline after commit message
 	    }
 	    set curdiffstart [$ctext index "end - 1c"]
 	    lappend ctext_file_names ""
-	    set fname [string range $line 10 [expr [string last " " $line] - 1]]
-	    lappend ctext_file_lines $fname
-	    makediffhdr $fname $ids
-	    $ctext insert end "\n$line\n" filesep
+	    if {$currdiffsubmod != $fname} {
+		lappend ctext_file_lines $fname
+		makediffhdr $fname $ids
+		set currdiffsubmod $fname
+		$ctext insert end "\n$line\n" filesep
+	    } else {
+		$ctext insert end "$line\n" filesep
+	    }
 	} elseif {![string compare -length 3 "  >" $line]} {
+	    set $currdiffsubmod ""
 	    set line [encoding convertfrom $diffencoding $line]
 	    $ctext insert end "$line\n" dresult
 	} elseif {![string compare -length 3 "  <" $line]} {
+	    set $currdiffsubmod ""
 	    set line [encoding convertfrom $diffencoding $line]
 	    $ctext insert end "$line\n" d0
 	} elseif {$diffinhdr} {
@@ -8527,7 +8547,7 @@ proc do_cmp_commits {a b} {
 }
 
 proc diffcommits {a b} {
-    global diffcontext diffids blobdifffd diffinhdr
+    global diffcontext diffids blobdifffd diffinhdr currdiffsubmod
 
     set tmpdir [gitknewtmpdir]
     set fna [file join $tmpdir "commit-[string range $a 0 7]"]
@@ -8548,6 +8568,7 @@ proc diffcommits {a b} {
     set diffids [list commits $a $b]
     set blobdifffd($diffids) $fd
     set diffinhdr 0
+    set currdiffsubmod ""
     filerun $fd [list getblobdiffline $fd $diffids]
 }
 
@@ -10528,7 +10549,6 @@ proc mkfontdisp {font top which} {
     set fontpref($font) [set $font]
     ${NS}::button $top.${font}but -text $which \
 	-command [list choosefont $font $which]
-    if {!$use_ttk} {$top.${font}but configure  -font optionfont}
     ${NS}::label $top.$font -relief flat -font $font \
 	-text $fontattr($font,family) -justify left
     grid x $top.${font}but $top.$font -sticky w
@@ -10791,15 +10811,6 @@ proc doprefs {} {
     mkfontdisp textfont $top [mc "Diff display font"]
     mkfontdisp uifont $top [mc "User interface font"]
 
-    if {!$use_ttk} {
-	foreach w {maxpctl maxwidthl showlocal autoselect tabstopl ntag
-	    ldiff lattr extdifff.l extdifff.b bgbut fgbut
-	    diffoldbut diffnewbut hunksepbut markbgbut selbgbut
-	    want_ttk ttk_note} {
-	    $top.$w configure -font optionfont
-	}
-    }
-
     ${NS}::frame $top.buts
     ${NS}::button $top.buts.ok -text [mc "OK"] -command prefsok -default active
     ${NS}::button $top.buts.can -text [mc "Cancel"] -command prefscan -default normal
@@ -10849,6 +10860,7 @@ proc setselbg {c} {
 # radiobuttons look bad.  This chooses white for selectColor if the
 # background color is light, or black if it is dark.
 proc setui {c} {
+    if {[tk windowingsystem] eq "win32"} { return }
     set bg [winfo rgb . $c]
     set selc black
     if {[lindex $bg 0] + 1.5 * [lindex $bg 1] + 0.5 * [lindex $bg 2] > 100000} {
@@ -11411,8 +11423,6 @@ namespace import ::msgcat::mc
 
 catch {source ~/.gitk}
 
-font create optionfont -family sans-serif -size -12
-
 parsefont mainfont $mainfont
 eval font create mainfont [fontflags mainfont]
 eval font create mainfontbold [fontflags mainfont 1]
@@ -11613,3 +11623,9 @@ if {[tk windowingsystem] eq "win32"} {
 }
 
 getcommits {}
+
+# Local variables:
+# mode: tcl
+# indent-tabs-mode: t
+# tab-width: 8
+# End:
diff --git a/gitk-git/po/de.po b/gitk-git/po/de.po
index c79aa9cbc8..bd194a3dff 100644
--- a/gitk-git/po/de.po
+++ b/gitk-git/po/de.po
@@ -334,14 +334,14 @@ msgid ""
 "\n"
 "Gitk - a commit viewer for git\n"
 "\n"
-"Copyright ©9 2005-2009 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Use and redistribute under the terms of the GNU General Public License"
 msgstr ""
 "\n"
 "Gitk - eine Visualisierung der Git-Historie\n"
 "\n"
-"Copyright © 2005-2009 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Benutzung und Weiterverbreitung gemäß den Bedingungen der GNU General Public License"
 
diff --git a/gitk-git/po/es.po b/gitk-git/po/es.po
index 0e19b5eae2..0471dd0672 100644
--- a/gitk-git/po/es.po
+++ b/gitk-git/po/es.po
@@ -281,14 +281,14 @@ msgid ""
 "\n"
 "Gitk - a commit viewer for git\n"
 "\n"
-"Copyright © 2005-2008 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Use and redistribute under the terms of the GNU General Public License"
 msgstr ""
 "\n"
 "Gitk - un visualizador de revisiones para git\n"
 "\n"
-"Copyright © 2005-2008 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Uso y redistribución permitidos según los términos de la Licencia Pública "
 "General de GNU (GNU GPL)"
diff --git a/gitk-git/po/fr.po b/gitk-git/po/fr.po
index cb0e1edc63..5370ddc393 100644
--- a/gitk-git/po/fr.po
+++ b/gitk-git/po/fr.po
@@ -334,14 +334,14 @@ msgid ""
 "\n"
 "Gitk - a commit viewer for git\n"
 "\n"
-"Copyright © 2005-2008 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Use and redistribute under the terms of the GNU General Public License"
 msgstr ""
 "\n"
 "Gitk - visualisateur de commit pour git\n"
 "\n"
-"Copyright © 2005-2008 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Utilisation et redistribution soumises aux termes de la GNU General Public "
 "License"
diff --git a/gitk-git/po/hu.po b/gitk-git/po/hu.po
index 1df212e881..7262b610dc 100644
--- a/gitk-git/po/hu.po
+++ b/gitk-git/po/hu.po
@@ -333,14 +333,14 @@ msgid ""
 "\n"
 "Gitk - a commit viewer for git\n"
 "\n"
-"Copyright ©9 2005-2009 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Use and redistribute under the terms of the GNU General Public License"
 msgstr ""
 "\n"
 "Gitk - commit nézegető a githez\n"
 "\n"
-"Szerzői jog ©9 2005-2009 Paul Mackerras\n"
+"Szerzői jog \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Használd és terjeszd a GNU General Public License feltételei mellett"
 
diff --git a/gitk-git/po/it.po b/gitk-git/po/it.po
index 4818652309..a730d63a42 100644
--- a/gitk-git/po/it.po
+++ b/gitk-git/po/it.po
@@ -334,14 +334,14 @@ msgid ""
 "\n"
 "Gitk - a commit viewer for git\n"
 "\n"
-"Copyright © 2005-2009 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Use and redistribute under the terms of the GNU General Public License"
 msgstr ""
 "\n"
 "Gitk - un visualizzatore di revisioni per git\n"
 "\n"
-"Copyright © 2005-2009 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Utilizzo e redistribuzione permessi sotto i termini della GNU General Public "
 "License"
diff --git a/gitk-git/po/ja.po b/gitk-git/po/ja.po
index c0c92addb4..4f4705164c 100644
--- a/gitk-git/po/ja.po
+++ b/gitk-git/po/ja.po
@@ -335,14 +335,14 @@ msgid ""
 "\n"
 "Gitk - a commit viewer for git\n"
 "\n"
-"Copyright © 2005-2008 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Use and redistribute under the terms of the GNU General Public License"
 msgstr ""
 "\n"
 "Gitk - gitコミットビューア\n"
 "\n"
-"Copyright © 2005-2008 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "使用および再配布は GNU General Public License に従ってください"
 
diff --git a/gitk-git/po/ru.po b/gitk-git/po/ru.po
index 704eba8f9d..c3d0285b24 100644
--- a/gitk-git/po/ru.po
+++ b/gitk-git/po/ru.po
@@ -313,14 +313,14 @@ msgid ""
 "\n"
 "Gitk - a commit viewer for git\n"
 "\n"
-"Copyright © 2005-2008 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Use and redistribute under the terms of the GNU General Public License"
 msgstr ""
 "\n"
 "Gitk - программа просмотра истории репозиториев Git\n"
 "\n"
-"Copyright (c) 2005-2008 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Использование и распространение согласно условиям GNU General Public License"
 
diff --git a/gitk-git/po/sv.po b/gitk-git/po/sv.po
index 0f5e2fd8d7..386763ade7 100644
--- a/gitk-git/po/sv.po
+++ b/gitk-git/po/sv.po
@@ -334,14 +334,14 @@ msgid ""
 "\n"
 "Gitk - a commit viewer for git\n"
 "\n"
-"Copyright ©9 2005-2009 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Use and redistribute under the terms of the GNU General Public License"
 msgstr ""
 "\n"
 "Gitk - en incheckningsvisare för git\n"
 "\n"
-"Copyright © 2005-2009 Paul Mackerras\n"
+"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
 "\n"
 "Använd och vidareförmedla enligt villkoren i GNU General Public License"
 
diff --git a/gitweb/INSTALL b/gitweb/INSTALL
index b76a0cffff..cbdc136470 100644
--- a/gitweb/INSTALL
+++ b/gitweb/INSTALL
@@ -2,11 +2,11 @@ GIT web Interface (gitweb) Installation
 =======================================
 
 First you have to generate gitweb.cgi from gitweb.perl using
-"make gitweb/gitweb.cgi", then copy appropriate files (gitweb.cgi,
+"make gitweb", then copy appropriate files (gitweb.cgi, gitweb.js,
 gitweb.css, git-logo.png and git-favicon.png) to their destination.
 For example if git was (or is) installed with /usr prefix, you can do
 
-	$ make prefix=/usr gitweb/gitweb.cgi  ;# as yourself
+	$ make prefix=/usr gitweb             ;# as yourself
 	# cp gitweb/git* /var/www/cgi-bin/    ;# as root
 
 Alternatively you can use autoconf generated ./configure script to
@@ -15,7 +15,7 @@ instead
 
 	$ make configure                     ;# as yourself
 	$ ./configure --prefix=/usr          ;# as yourself
-	$ make gitweb/gitweb.cgi             ;# as yourself
+	$ make gitweb                        ;# as yourself
 	# cp gitweb/git* /var/www/cgi-bin/   ;# as root
 
 The above example assumes that your web server is configured to run
@@ -31,8 +31,7 @@ file for gitweb (in gitweb/README).
 
 - There are many configuration variables which affect building of
   gitweb.cgi; see "default configuration for gitweb" section in main
-  (top dir) Makefile, and instructions for building gitweb/gitweb.cgi
-  target.
+  (top dir) Makefile, and instructions for building gitweb target.
 
   One of the most important is where to find the git wrapper binary. Gitweb
   tries to find the git wrapper at $(bindir)/git, so you have to set $bindir
@@ -62,9 +61,15 @@ file for gitweb (in gitweb/README).
   a suggestion).
 
 - You can control where gitweb tries to find its main CSS style file,
-  its favicon and logo with the GITWEB_CSS, GITWEB_FAVICON and GITWEB_LOGO
-  build configuration variables. By default gitweb tries to find them
-  in the same directory as gitweb.cgi script.
+  its JavaScript file, its favicon and logo with the GITWEB_CSS, GITWEB_JS
+  GITWEB_FAVICON and GITWEB_LOGO build configuration variables. By default
+  gitweb tries to find them in the same directory as gitweb.cgi script.
+
+- You can optionally generate minified versions of gitweb.js and gitweb.css
+  by defining the JSMIN and CSSMIN build configuration variables. By default
+  the non-minified versions will be used. NOTE: if you enable this option,
+  substitute gitweb.min.js and gitweb.min.css for all uses of gitweb.js and
+  gitweb.css in the help files.
 
 Build example
 ~~~~~~~~~~~~~
@@ -74,13 +79,14 @@ Build example
   we want to display are under /home/local/scm, you can do
 
 	make GITWEB_PROJECTROOT="/home/local/scm" \
+	     GITWEB_JS="/gitweb/gitweb.js" \
 	     GITWEB_CSS="/gitweb/gitweb.css" \
 	     GITWEB_LOGO="/gitweb/git-logo.png" \
 	     GITWEB_FAVICON="/gitweb/git-favicon.png" \
 	     bindir=/usr/local/bin \
-	     gitweb/gitweb.cgi
+	     gitweb
 
-	cp -fv ~/git/gitweb/gitweb.{cgi,css} \
+	cp -fv ~/git/gitweb/gitweb.{cgi,js,css} \
 	       ~/git/gitweb/git-{favicon,logo}.png \
 	     /var/www/cgi-bin/gitweb/
 
diff --git a/gitweb/Makefile b/gitweb/Makefile
index c9eb1ee667..e7dd252773 100644
--- a/gitweb/Makefile
+++ b/gitweb/Makefile
@@ -6,14 +6,14 @@ all::
 # Define JSMIN to point to JavaScript minifier that functions as
 # a filter to have gitweb.js minified.
 #
+# Define CSSMIN to point to a CSS minifier in order to generate a minified
+# version of gitweb.css
+#
 
 prefix ?= $(HOME)
 bindir ?= $(prefix)/bin
 RM ?= rm -f
 
-# JavaScript minifier invocation that can function as filter
-JSMIN ?=
-
 # default configuration for gitweb
 GITWEB_CONFIG = gitweb_config.perl
 GITWEB_CONFIG_SYSTEM = /etc/gitweb.conf
@@ -29,11 +29,7 @@ GITWEB_HOMETEXT = indextext.html
 GITWEB_CSS = gitweb.css
 GITWEB_LOGO = git-logo.png
 GITWEB_FAVICON = git-favicon.png
-ifdef JSMIN
-GITWEB_JS = gitweb.min.js
-else
 GITWEB_JS = gitweb.js
-endif
 GITWEB_SITE_HEADER =
 GITWEB_SITE_FOOTER =
 
@@ -85,45 +81,54 @@ endif
 all:: gitweb.cgi
 
 ifdef JSMIN
-FILES=gitweb.cgi gitweb.min.js
-gitweb.cgi: gitweb.perl gitweb.min.js
-else # !JSMIN
-FILES=gitweb.cgi
-gitweb.cgi: gitweb.perl
-endif # JSMIN
-
-gitweb.cgi:
+GITWEB_JS = gitweb.min.js
+all:: gitweb.min.js
+gitweb.min.js: gitweb.js GITWEB-BUILD-OPTIONS
+	$(QUIET_GEN)$(JSMIN) <$< >$@
+endif
+
+ifdef CSSMIN
+GITWEB_CSS = gitweb.min.css
+all:: gitweb.min.css
+gitweb.min.css: gitweb.css GITWEB-BUILD-OPTIONS
+	$(QUIET_GEN)$(CSSMIN) <$< >$@
+endif
+
+GITWEB_REPLACE = \
+	-e 's|++GIT_VERSION++|$(GIT_VERSION)|g' \
+	-e 's|++GIT_BINDIR++|$(bindir)|g' \
+	-e 's|++GITWEB_CONFIG++|$(GITWEB_CONFIG)|g' \
+	-e 's|++GITWEB_CONFIG_SYSTEM++|$(GITWEB_CONFIG_SYSTEM)|g' \
+	-e 's|++GITWEB_HOME_LINK_STR++|$(GITWEB_HOME_LINK_STR)|g' \
+	-e 's|++GITWEB_SITENAME++|$(GITWEB_SITENAME)|g' \
+	-e 's|++GITWEB_PROJECTROOT++|$(GITWEB_PROJECTROOT)|g' \
+	-e 's|"++GITWEB_PROJECT_MAXDEPTH++"|$(GITWEB_PROJECT_MAXDEPTH)|g' \
+	-e 's|++GITWEB_EXPORT_OK++|$(GITWEB_EXPORT_OK)|g' \
+	-e 's|++GITWEB_STRICT_EXPORT++|$(GITWEB_STRICT_EXPORT)|g' \
+	-e 's|++GITWEB_BASE_URL++|$(GITWEB_BASE_URL)|g' \
+	-e 's|++GITWEB_LIST++|$(GITWEB_LIST)|g' \
+	-e 's|++GITWEB_HOMETEXT++|$(GITWEB_HOMETEXT)|g' \
+	-e 's|++GITWEB_CSS++|$(GITWEB_CSS)|g' \
+	-e 's|++GITWEB_LOGO++|$(GITWEB_LOGO)|g' \
+	-e 's|++GITWEB_FAVICON++|$(GITWEB_FAVICON)|g' \
+	-e 's|++GITWEB_JS++|$(GITWEB_JS)|g' \
+	-e 's|++GITWEB_SITE_HEADER++|$(GITWEB_SITE_HEADER)|g' \
+	-e 's|++GITWEB_SITE_FOOTER++|$(GITWEB_SITE_FOOTER)|g'
+
+GITWEB-BUILD-OPTIONS: FORCE
+	@rm -f $@+
+	@echo "x" '$(PERL_PATH_SQ)' $(GITWEB_REPLACE) "$(JSMIN)|$(CSSMIN)" >$@+
+	@cmp -s $@+ $@ && rm -f $@+ || mv -f $@+ $@
+
+gitweb.cgi: gitweb.perl GITWEB-BUILD-OPTIONS
 	$(QUIET_GEN)$(RM) $@ $@+ && \
 	sed -e '1s|#!.*perl|#!$(PERL_PATH_SQ)|' \
-	    -e 's|++GIT_VERSION++|$(GIT_VERSION)|g' \
-	    -e 's|++GIT_BINDIR++|$(bindir)|g' \
-	    -e 's|++GITWEB_CONFIG++|$(GITWEB_CONFIG)|g' \
-	    -e 's|++GITWEB_CONFIG_SYSTEM++|$(GITWEB_CONFIG_SYSTEM)|g' \
-	    -e 's|++GITWEB_HOME_LINK_STR++|$(GITWEB_HOME_LINK_STR)|g' \
-	    -e 's|++GITWEB_SITENAME++|$(GITWEB_SITENAME)|g' \
-	    -e 's|++GITWEB_PROJECTROOT++|$(GITWEB_PROJECTROOT)|g' \
-	    -e 's|"++GITWEB_PROJECT_MAXDEPTH++"|$(GITWEB_PROJECT_MAXDEPTH)|g' \
-	    -e 's|++GITWEB_EXPORT_OK++|$(GITWEB_EXPORT_OK)|g' \
-	    -e 's|++GITWEB_STRICT_EXPORT++|$(GITWEB_STRICT_EXPORT)|g' \
-	    -e 's|++GITWEB_BASE_URL++|$(GITWEB_BASE_URL)|g' \
-	    -e 's|++GITWEB_LIST++|$(GITWEB_LIST)|g' \
-	    -e 's|++GITWEB_HOMETEXT++|$(GITWEB_HOMETEXT)|g' \
-	    -e 's|++GITWEB_CSS++|$(GITWEB_CSS)|g' \
-	    -e 's|++GITWEB_LOGO++|$(GITWEB_LOGO)|g' \
-	    -e 's|++GITWEB_FAVICON++|$(GITWEB_FAVICON)|g' \
-	    -e 's|++GITWEB_JS++|$(GITWEB_JS)|g' \
-	    -e 's|++GITWEB_SITE_HEADER++|$(GITWEB_SITE_HEADER)|g' \
-	    -e 's|++GITWEB_SITE_FOOTER++|$(GITWEB_SITE_FOOTER)|g' \
-	    $< >$@+ && \
+		$(GITWEB_REPLACE) $< >$@+ && \
 	chmod +x $@+ && \
 	mv $@+ $@
 
-ifdef JSMIN
-gitweb.min.js: gitweb.js
-	$(QUIET_GEN)$(JSMIN) <$< >$@
-endif # JSMIN
-
 clean:
-	$(RM) $(FILES)
+	$(RM) gitweb.cgi gitweb.min.js gitweb.min.css GITWEB-BUILD-OPTIONS
+
+.PHONY: all clean .FORCE-GIT-VERSION-FILE FORCE
 
-.PHONY: all clean .FORCE-GIT-VERSION-FILE
diff --git a/gitweb/README b/gitweb/README
index ad6a04c464..71742b335d 100644
--- a/gitweb/README
+++ b/gitweb/README
@@ -80,7 +80,8 @@ You can specify the following configuration variables when building GIT:
    Points to the location where you put gitweb.css on your web server
    (or to be more generic, the URI of gitweb stylesheet).  Relative to the
    base URI of gitweb.  Note that you can setup multiple stylesheets from
-   the gitweb config file.  [Default: gitweb.css]
+   the gitweb config file.  [Default: gitweb.css (or gitweb.min.css if the
+   CSSMIN variable is defined / CSS minifier is used)]
  * GITWEB_LOGO
    Points to the location where you put git-logo.png on your web server
    (or to be more generic URI of logo, 72x27 size, displayed in top right
diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl
index 9d4c58238e..c356e95f18 100755
--- a/gitweb/gitweb.perl
+++ b/gitweb/gitweb.perl
@@ -1150,6 +1150,7 @@ sub validate_refname {
 # in utf-8 thanks to "binmode STDOUT, ':utf8'" at beginning
 sub to_utf8 {
 	my $str = shift;
+	return undef unless defined $str;
 	if (utf8::valid($str)) {
 		utf8::decode($str);
 		return $str;
@@ -1162,6 +1163,7 @@ sub to_utf8 {
 # correct, but quoted slashes look too horrible in bookmarks
 sub esc_param {
 	my $str = shift;
+	return undef unless defined $str;
 	$str =~ s/([^A-Za-z0-9\-_.~()\/:@ ]+)/CGI::escape($1)/eg;
 	$str =~ s/ /\+/g;
 	return $str;
@@ -1170,6 +1172,7 @@ sub esc_param {
 # quote unsafe chars in whole URL, so some charactrs cannot be quoted
 sub esc_url {
 	my $str = shift;
+	return undef unless defined $str;
 	$str =~ s/([^A-Za-z0-9\-_.~();\/;?:@&=])/sprintf("%%%02X", ord($1))/eg;
 	$str =~ s/\+/%2B/g;
 	$str =~ s/ /\+/g;
@@ -1181,6 +1184,8 @@ sub esc_html {
 	my $str = shift;
 	my %opts = @_;
 
+	return undef unless defined $str;
+
 	$str = to_utf8($str);
 	$str = $cgi->escapeHTML($str);
 	if ($opts{'-nbsp'}) {
@@ -1195,6 +1200,8 @@ sub esc_path {
 	my $str = shift;
 	my %opts = @_;
 
+	return undef unless defined $str;
+
 	$str = to_utf8($str);
 	$str = $cgi->escapeHTML($str);
 	if ($opts{'-nbsp'}) {
@@ -3381,7 +3388,7 @@ sub git_footer_html {
 	      "</html>";
 }
 
-# die_error(<http_status_code>, <error_message>)
+# die_error(<http_status_code>, <error_message>[, <detailed_html_description>])
 # Example: die_error(404, 'Hash not found')
 # By convention, use the following status codes (as defined in RFC 2616):
 # 400: Invalid or missing CGI parameters, or
@@ -3396,7 +3403,7 @@ sub git_footer_html {
 #      or down for maintenance).  Generally, this is a temporary state.
 sub die_error {
 	my $status = shift || 500;
-	my $error = shift || "Internal server error";
+	my $error = esc_html(shift) || "Internal Server Error";
 	my $extra = shift;
 
 	my %http_responses = (
diff --git a/graph.c b/graph.c
index 6746d422a9..e6bbcaa8c4 100644
--- a/graph.c
+++ b/graph.c
@@ -80,12 +80,12 @@ static char column_colors[][COLOR_MAXLEN] = {
 	GIT_COLOR_BLUE,
 	GIT_COLOR_MAGENTA,
 	GIT_COLOR_CYAN,
-	GIT_COLOR_BOLD GIT_COLOR_RED,
-	GIT_COLOR_BOLD GIT_COLOR_GREEN,
-	GIT_COLOR_BOLD GIT_COLOR_YELLOW,
-	GIT_COLOR_BOLD GIT_COLOR_BLUE,
-	GIT_COLOR_BOLD GIT_COLOR_MAGENTA,
-	GIT_COLOR_BOLD GIT_COLOR_CYAN,
+	GIT_COLOR_BOLD_RED,
+	GIT_COLOR_BOLD_GREEN,
+	GIT_COLOR_BOLD_YELLOW,
+	GIT_COLOR_BOLD_BLUE,
+	GIT_COLOR_BOLD_MAGENTA,
+	GIT_COLOR_BOLD_CYAN,
 };
 
 #define COLUMN_COLORS_MAX (ARRAY_SIZE(column_colors))
diff --git a/grep.c b/grep.c
index 90a063a985..543b1d5378 100644
--- a/grep.c
+++ b/grep.c
@@ -304,9 +304,28 @@ static int word_char(char ch)
 	return isalnum(ch) || ch == '_';
 }
 
+static void output_color(struct grep_opt *opt, const void *data, size_t size,
+			 const char *color)
+{
+	if (opt->color && color && color[0]) {
+		opt->output(opt, color, strlen(color));
+		opt->output(opt, data, size);
+		opt->output(opt, GIT_COLOR_RESET, strlen(GIT_COLOR_RESET));
+	} else
+		opt->output(opt, data, size);
+}
+
+static void output_sep(struct grep_opt *opt, char sign)
+{
+	if (opt->null_following_name)
+		opt->output(opt, "\0", 1);
+	else
+		output_color(opt, &sign, 1, opt->color_sep);
+}
+
 static void show_name(struct grep_opt *opt, const char *name)
 {
-	opt->output(opt, name, strlen(name));
+	output_color(opt, name, strlen(name), opt->color_filename);
 	opt->output(opt, opt->null_following_name ? "\0" : "\n", 1);
 }
 
@@ -544,31 +563,30 @@ static void show_line(struct grep_opt *opt, char *bol, char *eol,
 		      const char *name, unsigned lno, char sign)
 {
 	int rest = eol - bol;
-	char sign_str[1];
+	char *line_color = NULL;
 
-	sign_str[0] = sign;
 	if (opt->pre_context || opt->post_context) {
 		if (opt->last_shown == 0) {
-			if (opt->show_hunk_mark)
-				opt->output(opt, "--\n", 3);
-			else
-				opt->show_hunk_mark = 1;
-		} else if (lno > opt->last_shown + 1)
-			opt->output(opt, "--\n", 3);
+			if (opt->show_hunk_mark) {
+				output_color(opt, "--", 2, opt->color_sep);
+				opt->output(opt, "\n", 1);
+			}
+		} else if (lno > opt->last_shown + 1) {
+			output_color(opt, "--", 2, opt->color_sep);
+			opt->output(opt, "\n", 1);
+		}
 	}
 	opt->last_shown = lno;
 
-	if (opt->null_following_name)
-		sign_str[0] = '\0';
 	if (opt->pathname) {
-		opt->output(opt, name, strlen(name));
-		opt->output(opt, sign_str, 1);
+		output_color(opt, name, strlen(name), opt->color_filename);
+		output_sep(opt, sign);
 	}
 	if (opt->linenum) {
 		char buf[32];
 		snprintf(buf, sizeof(buf), "%d", lno);
-		opt->output(opt, buf, strlen(buf));
-		opt->output(opt, sign_str, 1);
+		output_color(opt, buf, strlen(buf), opt->color_lineno);
+		output_sep(opt, sign);
 	}
 	if (opt->color) {
 		regmatch_t match;
@@ -576,25 +594,28 @@ static void show_line(struct grep_opt *opt, char *bol, char *eol,
 		int ch = *eol;
 		int eflags = 0;
 
+		if (sign == ':')
+			line_color = opt->color_selected;
+		else if (sign == '-')
+			line_color = opt->color_context;
+		else if (sign == '=')
+			line_color = opt->color_function;
 		*eol = '\0';
 		while (next_match(opt, bol, eol, ctx, &match, eflags)) {
 			if (match.rm_so == match.rm_eo)
 				break;
 
-			opt->output(opt, bol, match.rm_so);
-			opt->output(opt, opt->color_match,
-				    strlen(opt->color_match));
-			opt->output(opt, bol + match.rm_so,
-				    (int)(match.rm_eo - match.rm_so));
-			opt->output(opt, GIT_COLOR_RESET,
-				    strlen(GIT_COLOR_RESET));
+			output_color(opt, bol, match.rm_so, line_color);
+			output_color(opt, bol + match.rm_so,
+				     match.rm_eo - match.rm_so,
+				     opt->color_match);
 			bol += match.rm_eo;
 			rest -= match.rm_eo;
 			eflags = REG_NOTBOL;
 		}
 		*eol = ch;
 	}
-	opt->output(opt, bol, rest);
+	output_color(opt, bol, rest, line_color);
 	opt->output(opt, "\n", 1);
 }
 
@@ -750,14 +771,6 @@ int grep_threads_ok(const struct grep_opt *opt)
 	    !opt->name_only)
 		return 0;
 
-	/* If we are showing hunk marks, we should not do it for the
-	 * first match. The synchronization problem we get for this
-	 * constraint is not yet solved, so we disable threading in
-	 * this case.
-	 */
-	if (opt->pre_context || opt->post_context)
-		return 0;
-
 	return 1;
 }
 
@@ -779,11 +792,14 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name,
 	enum grep_context ctx = GREP_CONTEXT_HEAD;
 	xdemitconf_t xecfg;
 
-	opt->last_shown = 0;
-
 	if (!opt->output)
 		opt->output = std_output;
 
+	if (opt->last_shown && (opt->pre_context || opt->post_context) &&
+	    opt->output == std_output)
+		opt->show_hunk_mark = 1;
+	opt->last_shown = 0;
+
 	if (buffer_is_binary(buf, size)) {
 		switch (opt->binary) {
 		case GREP_BINARY_DEFAULT:
@@ -857,7 +873,8 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name,
 				return 1;
 			if (binary_match_only) {
 				opt->output(opt, "Binary file ", 12);
-				opt->output(opt, name, strlen(name));
+				output_color(opt, name, strlen(name),
+					     opt->color_filename);
 				opt->output(opt, " matches\n", 9);
 				return 1;
 			}
@@ -916,9 +933,9 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name,
 	 */
 	if (opt->count && count) {
 		char buf[32];
-		opt->output(opt, name, strlen(name));
-		snprintf(buf, sizeof(buf), "%c%u\n",
-			 opt->null_following_name ? '\0' : ':', count);
+		output_color(opt, name, strlen(name), opt->color_filename);
+		output_sep(opt, ':');
+		snprintf(buf, sizeof(buf), "%u\n", count);
 		opt->output(opt, buf, strlen(buf));
 	}
 	return !!last_hit;
diff --git a/grep.h b/grep.h
index d35bc29bfd..89342e5b47 100644
--- a/grep.h
+++ b/grep.h
@@ -86,7 +86,13 @@ struct grep_opt {
 	int color;
 	int max_depth;
 	int funcname;
+	char color_context[COLOR_MAXLEN];
+	char color_filename[COLOR_MAXLEN];
+	char color_function[COLOR_MAXLEN];
+	char color_lineno[COLOR_MAXLEN];
 	char color_match[COLOR_MAXLEN];
+	char color_selected[COLOR_MAXLEN];
+	char color_sep[COLOR_MAXLEN];
 	int regflags;
 	unsigned pre_context;
 	unsigned post_context;
diff --git a/http-fetch.c b/http-fetch.c
index ffd0ad7e29..762c750d7a 100644
--- a/http-fetch.c
+++ b/http-fetch.c
@@ -1,5 +1,6 @@
 #include "cache.h"
 #include "exec_cmd.h"
+#include "http.h"
 #include "walker.h"
 
 static const char http_fetch_usage[] = "git http-fetch "
@@ -69,7 +70,8 @@ int main(int argc, const char **argv)
 		url = rewritten_url;
 	}
 
-	walker = get_http_walker(url, NULL);
+	http_init(NULL);
+	walker = get_http_walker(url);
 	walker->get_tree = get_tree;
 	walker->get_history = get_history;
 	walker->get_all = get_all;
@@ -89,6 +91,7 @@ int main(int argc, const char **argv)
 	}
 
 	walker_free(walker);
+	http_cleanup();
 
 	free(rewritten_url);
 
diff --git a/http-push.c b/http-push.c
index 432b20f2d9..415b1ab0a7 100644
--- a/http-push.c
+++ b/http-push.c
@@ -1965,7 +1965,7 @@ int main(int argc, char **argv)
 		}
 
 		if (!hashcmp(ref->old_sha1, ref->peer_ref->new_sha1)) {
-			if (push_verbosely || 1)
+			if (push_verbosely)
 				fprintf(stderr, "'%s': up-to-date\n", ref->name);
 			if (helper_status)
 				printf("ok %s up to date\n", ref->name);
diff --git a/http-walker.c b/http-walker.c
index 700bc13112..8ca76d0507 100644
--- a/http-walker.c
+++ b/http-walker.c
@@ -510,7 +510,7 @@ static int fetch_object(struct walker *walker, struct alt_base *repo, unsigned c
 		ret = error("File %s has bad hash", hex);
 	} else if (req->rename < 0) {
 		ret = error("unable to write sha1 filename %s",
-			    req->filename);
+			    sha1_file_name(req->sha1));
 	}
 
 	release_http_object_request(req);
@@ -543,17 +543,30 @@ static int fetch_ref(struct walker *walker, struct ref *ref)
 
 static void cleanup(struct walker *walker)
 {
-	http_cleanup();
+	struct walker_data *data = walker->data;
+	struct alt_base *alt, *alt_next;
+
+	if (data) {
+		alt = data->alt;
+		while (alt) {
+			alt_next = alt->next;
+
+			free(alt->base);
+			free(alt);
+
+			alt = alt_next;
+		}
+		free(data);
+		walker->data = NULL;
+	}
 }
 
-struct walker *get_http_walker(const char *url, struct remote *remote)
+struct walker *get_http_walker(const char *url)
 {
 	char *s;
 	struct walker_data *data = xmalloc(sizeof(struct walker_data));
 	struct walker *walker = xmalloc(sizeof(struct walker));
 
-	http_init(remote);
-
 	data->alt = xmalloc(sizeof(*data->alt));
 	data->alt->base = xmalloc(strlen(url) + 1);
 	strcpy(data->alt->base, url);
diff --git a/http.c b/http.c
index deab59551d..1320c50e32 100644
--- a/http.c
+++ b/http.c
@@ -1,6 +1,7 @@
 #include "http.h"
 #include "pack.h"
 #include "sideband.h"
+#include "run-command.h"
 
 int data_received;
 int active_requests;
@@ -204,7 +205,7 @@ static void init_curl_http_auth(CURL *result)
 	if (user_name) {
 		struct strbuf up = STRBUF_INIT;
 		if (!user_pass)
-			user_pass = xstrdup(getpass("Password: "));
+			user_pass = xstrdup(git_getpass("Password: "));
 		strbuf_addf(&up, "%s:%s", user_name, user_pass);
 		curl_easy_setopt(result, CURLOPT_USERPWD,
 				 strbuf_detach(&up, NULL));
@@ -219,7 +220,7 @@ static int has_cert_password(void)
 		return 0;
 	/* Only prompt the user once. */
 	ssl_cert_password_required = -1;
-	ssl_cert_password = getpass("Certificate Password: ");
+	ssl_cert_password = git_getpass("Certificate Password: ");
 	if (ssl_cert_password != NULL) {
 		ssl_cert_password = xstrdup(ssl_cert_password);
 		return 1;
@@ -720,7 +721,7 @@ static inline int hex(int v)
 		return 'A' + v - 10;
 }
 
-static void end_url_with_slash(struct strbuf *buf, const char *url)
+void end_url_with_slash(struct strbuf *buf, const char *url)
 {
 	strbuf_addstr(buf, url);
 	if (buf->len && buf->buf[buf->len - 1] != '/')
@@ -815,7 +816,21 @@ static int http_request(const char *url, void *result, int target, int options)
 			ret = HTTP_OK;
 		else if (missing_target(&results))
 			ret = HTTP_MISSING_TARGET;
-		else
+		else if (results.http_code == 401) {
+			if (user_name) {
+				ret = HTTP_NOAUTH;
+			} else {
+				/*
+				 * git_getpass is needed here because its very likely stdin/stdout are
+				 * pipes to our parent process.  So we instead need to use /dev/tty,
+				 * but that is non-portable.  Using git_getpass() can at least be stubbed
+				 * on other platforms with a different implementation if/when necessary.
+				 */
+				user_name = xstrdup(git_getpass("Username: "));
+				init_curl_http_auth(slot->curl);
+				ret = HTTP_REAUTH;
+			}
+		} else
 			ret = HTTP_ERROR;
 	} else {
 		error("Unable to start HTTP request for %s", url);
@@ -831,7 +846,11 @@ static int http_request(const char *url, void *result, int target, int options)
 
 int http_get_strbuf(const char *url, struct strbuf *result, int options)
 {
-	return http_request(url, result, HTTP_REQUEST_STRBUF, options);
+	int http_ret = http_request(url, result, HTTP_REQUEST_STRBUF, options);
+	if (http_ret == HTTP_REAUTH) {
+		http_ret = http_request(url, result, HTTP_REQUEST_STRBUF, options);
+	}
+	return http_ret;
 }
 
 /*
@@ -896,47 +915,67 @@ int http_fetch_ref(const char *base, struct ref *ref)
 }
 
 /* Helpers for fetching packs */
-static int fetch_pack_index(unsigned char *sha1, const char *base_url)
+static char *fetch_pack_index(unsigned char *sha1, const char *base_url)
 {
-	int ret = 0;
-	char *hex = xstrdup(sha1_to_hex(sha1));
-	char *filename;
-	char *url = NULL;
+	char *url, *tmp;
 	struct strbuf buf = STRBUF_INIT;
 
-	if (has_pack_index(sha1)) {
-		ret = 0;
-		goto cleanup;
-	}
-
 	if (http_is_verbose)
-		fprintf(stderr, "Getting index for pack %s\n", hex);
+		fprintf(stderr, "Getting index for pack %s\n", sha1_to_hex(sha1));
 
 	end_url_with_slash(&buf, base_url);
-	strbuf_addf(&buf, "objects/pack/pack-%s.idx", hex);
+	strbuf_addf(&buf, "objects/pack/pack-%s.idx", sha1_to_hex(sha1));
 	url = strbuf_detach(&buf, NULL);
 
-	filename = sha1_pack_index_name(sha1);
-	if (http_get_file(url, filename, 0) != HTTP_OK)
-		ret = error("Unable to get pack index %s\n", url);
+	strbuf_addf(&buf, "%s.temp", sha1_pack_index_name(sha1));
+	tmp = strbuf_detach(&buf, NULL);
+
+	if (http_get_file(url, tmp, 0) != HTTP_OK) {
+		error("Unable to get pack index %s\n", url);
+		free(tmp);
+		tmp = NULL;
+	}
 
-cleanup:
-	free(hex);
 	free(url);
-	return ret;
+	return tmp;
 }
 
 static int fetch_and_setup_pack_index(struct packed_git **packs_head,
 	unsigned char *sha1, const char *base_url)
 {
 	struct packed_git *new_pack;
+	char *tmp_idx = NULL;
+	int ret;
 
-	if (fetch_pack_index(sha1, base_url))
+	if (has_pack_index(sha1)) {
+		new_pack = parse_pack_index(sha1, NULL);
+		if (!new_pack)
+			return -1; /* parse_pack_index() already issued error message */
+		goto add_pack;
+	}
+
+	tmp_idx = fetch_pack_index(sha1, base_url);
+	if (!tmp_idx)
 		return -1;
 
-	new_pack = parse_pack_index(sha1);
-	if (!new_pack)
+	new_pack = parse_pack_index(sha1, tmp_idx);
+	if (!new_pack) {
+		unlink(tmp_idx);
+		free(tmp_idx);
+
 		return -1; /* parse_pack_index() already issued error message */
+	}
+
+	ret = verify_pack_index(new_pack);
+	if (!ret) {
+		close_pack_index(new_pack);
+		ret = move_temp_to_file(tmp_idx, sha1_pack_index_name(sha1));
+	}
+	free(tmp_idx);
+	if (ret)
+		return -1;
+
+add_pack:
 	new_pack->next = *packs_head;
 	*packs_head = new_pack;
 	return 0;
@@ -1000,37 +1039,62 @@ void release_http_pack_request(struct http_pack_request *preq)
 
 int finish_http_pack_request(struct http_pack_request *preq)
 {
-	int ret;
 	struct packed_git **lst;
+	struct packed_git *p = preq->target;
+	char *tmp_idx;
+	struct child_process ip;
+	const char *ip_argv[8];
 
-	preq->target->pack_size = ftell(preq->packfile);
-
-	if (preq->packfile != NULL) {
-		fclose(preq->packfile);
-		preq->packfile = NULL;
-		preq->slot->local = NULL;
-	}
+	close_pack_index(p);
 
-	ret = move_temp_to_file(preq->tmpfile, preq->filename);
-	if (ret)
-		return ret;
+	fclose(preq->packfile);
+	preq->packfile = NULL;
+	preq->slot->local = NULL;
 
 	lst = preq->lst;
-	while (*lst != preq->target)
+	while (*lst != p)
 		lst = &((*lst)->next);
 	*lst = (*lst)->next;
 
-	if (verify_pack(preq->target))
+	tmp_idx = xstrdup(preq->tmpfile);
+	strcpy(tmp_idx + strlen(tmp_idx) - strlen(".pack.temp"),
+	       ".idx.temp");
+
+	ip_argv[0] = "index-pack";
+	ip_argv[1] = "-o";
+	ip_argv[2] = tmp_idx;
+	ip_argv[3] = preq->tmpfile;
+	ip_argv[4] = NULL;
+
+	memset(&ip, 0, sizeof(ip));
+	ip.argv = ip_argv;
+	ip.git_cmd = 1;
+	ip.no_stdin = 1;
+	ip.no_stdout = 1;
+
+	if (run_command(&ip)) {
+		unlink(preq->tmpfile);
+		unlink(tmp_idx);
+		free(tmp_idx);
+		return -1;
+	}
+
+	unlink(sha1_pack_index_name(p->sha1));
+
+	if (move_temp_to_file(preq->tmpfile, sha1_pack_name(p->sha1))
+	 || move_temp_to_file(tmp_idx, sha1_pack_index_name(p->sha1))) {
+		free(tmp_idx);
 		return -1;
-	install_packed_git(preq->target);
+	}
 
+	install_packed_git(p);
+	free(tmp_idx);
 	return 0;
 }
 
 struct http_pack_request *new_http_pack_request(
 	struct packed_git *target, const char *base_url)
 {
-	char *filename;
 	long prev_posn = 0;
 	char range[RANGE_HEADER_SIZE];
 	struct strbuf buf = STRBUF_INIT;
@@ -1045,9 +1109,8 @@ struct http_pack_request *new_http_pack_request(
 		sha1_to_hex(target->sha1));
 	preq->url = strbuf_detach(&buf, NULL);
 
-	filename = sha1_pack_name(target->sha1);
-	snprintf(preq->filename, sizeof(preq->filename), "%s", filename);
-	snprintf(preq->tmpfile, sizeof(preq->tmpfile), "%s.temp", filename);
+	snprintf(preq->tmpfile, sizeof(preq->tmpfile), "%s.temp",
+		sha1_pack_name(target->sha1));
 	preq->packfile = fopen(preq->tmpfile, "a");
 	if (!preq->packfile) {
 		error("Unable to open local file %s for pack",
@@ -1082,7 +1145,6 @@ struct http_pack_request *new_http_pack_request(
 	return preq;
 
 abort:
-	free(filename);
 	free(preq->url);
 	free(preq);
 	return NULL;
@@ -1137,7 +1199,6 @@ struct http_object_request *new_http_object_request(const char *base_url,
 	freq->localfile = -1;
 
 	filename = sha1_file_name(sha1);
-	snprintf(freq->filename, sizeof(freq->filename), "%s", filename);
 	snprintf(freq->tmpfile, sizeof(freq->tmpfile),
 		 "%s.temp", filename);
 
@@ -1166,8 +1227,8 @@ struct http_object_request *new_http_object_request(const char *base_url,
 	}
 
 	if (freq->localfile < 0) {
-		error("Couldn't create temporary file %s for %s: %s",
-		      freq->tmpfile, freq->filename, strerror(errno));
+		error("Couldn't create temporary file %s: %s",
+		      freq->tmpfile, strerror(errno));
 		goto abort;
 	}
 
@@ -1214,8 +1275,8 @@ struct http_object_request *new_http_object_request(const char *base_url,
 			prev_posn = 0;
 			lseek(freq->localfile, 0, SEEK_SET);
 			if (ftruncate(freq->localfile, 0) < 0) {
-				error("Couldn't truncate temporary file %s for %s: %s",
-					  freq->tmpfile, freq->filename, strerror(errno));
+				error("Couldn't truncate temporary file %s: %s",
+					  freq->tmpfile, strerror(errno));
 				goto abort;
 			}
 		}
@@ -1291,7 +1352,7 @@ int finish_http_object_request(struct http_object_request *freq)
 		return -1;
 	}
 	freq->rename =
-		move_temp_to_file(freq->tmpfile, freq->filename);
+		move_temp_to_file(freq->tmpfile, sha1_file_name(freq->sha1));
 
 	return freq->rename;
 }
diff --git a/http.h b/http.h
index 5c9441c10c..a0b5901594 100644
--- a/http.h
+++ b/http.h
@@ -117,6 +117,7 @@ extern void append_remote_object_url(struct strbuf *buf, const char *url,
 				     int only_two_digit_prefix);
 extern char *get_remote_object_url(const char *url, const char *hex,
 				   int only_two_digit_prefix);
+extern void end_url_with_slash(struct strbuf *buf, const char *url);
 
 /* Options for http_request_*() */
 #define HTTP_NO_CACHE		1
@@ -126,6 +127,8 @@ extern char *get_remote_object_url(const char *url, const char *hex,
 #define HTTP_MISSING_TARGET	1
 #define HTTP_ERROR		2
 #define HTTP_START_FAILED	3
+#define HTTP_REAUTH	4
+#define HTTP_NOAUTH	5
 
 /*
  * Requests an url and stores the result in a strbuf.
@@ -152,7 +155,6 @@ struct http_pack_request
 	struct packed_git *target;
 	struct packed_git **lst;
 	FILE *packfile;
-	char filename[PATH_MAX];
 	char tmpfile[PATH_MAX];
 	struct curl_slist *range_header;
 	struct active_request_slot *slot;
@@ -167,7 +169,6 @@ extern void release_http_pack_request(struct http_pack_request *preq);
 struct http_object_request
 {
 	char *url;
-	char filename[PATH_MAX];
 	char tmpfile[PATH_MAX];
 	int localfile;
 	CURLcode curl_result;
diff --git a/imap-send.c b/imap-send.c
index 379dec491f..9d0097ca02 100644
--- a/imap-send.c
+++ b/imap-send.c
@@ -27,6 +27,9 @@
 #include "run-command.h"
 #ifdef NO_OPENSSL
 typedef void *SSL;
+#else
+#include <openssl/evp.h>
+#include <openssl/hmac.h>
 #endif
 
 struct store_conf {
@@ -139,6 +142,20 @@ struct imap_server_conf {
 	int use_ssl;
 	int ssl_verify;
 	int use_html;
+	char *auth_method;
+};
+
+static struct imap_server_conf server = {
+	NULL,	/* name */
+	NULL,	/* tunnel */
+	NULL,	/* host */
+	0,	/* port */
+	NULL,	/* user */
+	NULL,	/* pass */
+	0,   	/* use_ssl */
+	1,   	/* ssl_verify */
+	0,   	/* use_html */
+	NULL,	/* auth_method */
 };
 
 struct imap_store_conf {
@@ -213,6 +230,7 @@ enum CAPABILITY {
 	LITERALPLUS,
 	NAMESPACE,
 	STARTTLS,
+	AUTH_CRAM_MD5,
 };
 
 static const char *cap_list[] = {
@@ -221,6 +239,7 @@ static const char *cap_list[] = {
 	"LITERAL+",
 	"NAMESPACE",
 	"STARTTLS",
+	"AUTH=CRAM-MD5",
 };
 
 #define RESP_OK    0
@@ -948,6 +967,87 @@ static void imap_close_store(struct store *ctx)
 	free(ctx);
 }
 
+#ifndef NO_OPENSSL
+
+/*
+ * hexchar() and cram() functions are based on the code from the isync
+ * project (http://isync.sf.net/).
+ */
+static char hexchar(unsigned int b)
+{
+	return b < 10 ? '0' + b : 'a' + (b - 10);
+}
+
+#define ENCODED_SIZE(n) (4*((n+2)/3))
+static char *cram(const char *challenge_64, const char *user, const char *pass)
+{
+	int i, resp_len, encoded_len, decoded_len;
+	HMAC_CTX hmac;
+	unsigned char hash[16];
+	char hex[33];
+	char *response, *response_64, *challenge;
+
+	/*
+	 * length of challenge_64 (i.e. base-64 encoded string) is a good
+	 * enough upper bound for challenge (decoded result).
+	 */
+	encoded_len = strlen(challenge_64);
+	challenge = xmalloc(encoded_len);
+	decoded_len = EVP_DecodeBlock((unsigned char *)challenge,
+				      (unsigned char *)challenge_64, encoded_len);
+	if (decoded_len < 0)
+		die("invalid challenge %s", challenge_64);
+	HMAC_Init(&hmac, (unsigned char *)pass, strlen(pass), EVP_md5());
+	HMAC_Update(&hmac, (unsigned char *)challenge, decoded_len);
+	HMAC_Final(&hmac, hash, NULL);
+	HMAC_CTX_cleanup(&hmac);
+
+	hex[32] = 0;
+	for (i = 0; i < 16; i++) {
+		hex[2 * i] = hexchar((hash[i] >> 4) & 0xf);
+		hex[2 * i + 1] = hexchar(hash[i] & 0xf);
+	}
+
+	/* response: "<user> <digest in hex>" */
+	resp_len = strlen(user) + 1 + strlen(hex) + 1;
+	response = xmalloc(resp_len);
+	sprintf(response, "%s %s", user, hex);
+
+	response_64 = xmalloc(ENCODED_SIZE(resp_len) + 1);
+	encoded_len = EVP_EncodeBlock((unsigned char *)response_64,
+				      (unsigned char *)response, resp_len);
+	if (encoded_len < 0)
+		die("EVP_EncodeBlock error");
+	response_64[encoded_len] = '\0';
+	return (char *)response_64;
+}
+
+#else
+
+static char *cram(const char *challenge_64, const char *user, const char *pass)
+{
+	die("If you want to use CRAM-MD5 authenticate method, "
+	    "you have to build git-imap-send with OpenSSL library.");
+}
+
+#endif
+
+static int auth_cram_md5(struct imap_store *ctx, struct imap_cmd *cmd, const char *prompt)
+{
+	int ret;
+	char *response;
+
+	response = cram(prompt, server.user, server.pass);
+
+	ret = socket_write(&ctx->imap->buf.sock, response, strlen(response));
+	if (ret != strlen(response))
+		return error("IMAP error: sending response failed\n");
+
+	free(response);
+
+	return 0;
+}
+
 static struct store *imap_open_store(struct imap_server_conf *srvc)
 {
 	struct imap_store *ctx;
@@ -1107,7 +1207,7 @@ static struct store *imap_open_store(struct imap_server_conf *srvc)
 		if (!srvc->pass) {
 			char prompt[80];
 			sprintf(prompt, "Password (%s@%s): ", srvc->user, srvc->host);
-			arg = getpass(prompt);
+			arg = git_getpass(prompt);
 			if (!arg) {
 				perror("getpass");
 				exit(1);
@@ -1126,12 +1226,37 @@ static struct store *imap_open_store(struct imap_server_conf *srvc)
 			fprintf(stderr, "Skipping account %s@%s, server forbids LOGIN\n", srvc->user, srvc->host);
 			goto bail;
 		}
-		if (!imap->buf.sock.ssl)
-			imap_warn("*** IMAP Warning *** Password is being "
-				  "sent in the clear\n");
-		if (imap_exec(ctx, NULL, "LOGIN \"%s\" \"%s\"", srvc->user, srvc->pass) != RESP_OK) {
-			fprintf(stderr, "IMAP error: LOGIN failed\n");
-			goto bail;
+
+		if (srvc->auth_method) {
+			struct imap_cmd_cb cb;
+
+			if (!strcmp(srvc->auth_method, "CRAM-MD5")) {
+				if (!CAP(AUTH_CRAM_MD5)) {
+					fprintf(stderr, "You specified"
+						"CRAM-MD5 as authentication method, "
+						"but %s doesn't support it.\n", srvc->host);
+					goto bail;
+				}
+				/* CRAM-MD5 */
+
+				memset(&cb, 0, sizeof(cb));
+				cb.cont = auth_cram_md5;
+				if (imap_exec(ctx, &cb, "AUTHENTICATE CRAM-MD5") != RESP_OK) {
+					fprintf(stderr, "IMAP error: AUTHENTICATE CRAM-MD5 failed\n");
+					goto bail;
+				}
+			} else {
+				fprintf(stderr, "Unknown authentication method:%s\n", srvc->host);
+				goto bail;
+			}
+		} else {
+			if (!imap->buf.sock.ssl)
+				imap_warn("*** IMAP Warning *** Password is being "
+					  "sent in the clear\n");
+			if (imap_exec(ctx, NULL, "LOGIN \"%s\" \"%s\"", srvc->user, srvc->pass) != RESP_OK) {
+				fprintf(stderr, "IMAP error: LOGIN failed\n");
+				goto bail;
+			}
 		}
 	} /* !preauth */
 
@@ -1354,18 +1479,6 @@ static int split_msg(struct msg_data *all_msgs, struct msg_data *msg, int *ofs)
 	return 1;
 }
 
-static struct imap_server_conf server = {
-	NULL,	/* name */
-	NULL,	/* tunnel */
-	NULL,	/* host */
-	0,	/* port */
-	NULL,	/* user */
-	NULL,	/* pass */
-	0,   	/* use_ssl */
-	1,   	/* ssl_verify */
-	0,   	/* use_html */
-};
-
 static char *imap_folder;
 
 static int git_imap_config(const char *key, const char *val, void *cb)
@@ -1405,6 +1518,9 @@ static int git_imap_config(const char *key, const char *val, void *cb)
 		server.port = git_config_int(key, val);
 	else if (!strcmp("tunnel", key))
 		server.tunnel = xstrdup(val);
+	else if (!strcmp("authmethod", key))
+		server.auth_method = xstrdup(val);
+
 	return 0;
 }
 
diff --git a/ll-merge.c b/ll-merge.c
index 4c7f11ba84..f9b3d854a9 100644
--- a/ll-merge.c
+++ b/ll-merge.c
@@ -15,7 +15,7 @@ struct ll_merge_driver;
 typedef int (*ll_merge_fn)(const struct ll_merge_driver *,
 			   mmbuffer_t *result,
 			   const char *path,
-			   mmfile_t *orig,
+			   mmfile_t *orig, const char *orig_name,
 			   mmfile_t *src1, const char *name1,
 			   mmfile_t *src2, const char *name2,
 			   int flag,
@@ -36,7 +36,7 @@ struct ll_merge_driver {
 static int ll_binary_merge(const struct ll_merge_driver *drv_unused,
 			   mmbuffer_t *result,
 			   const char *path_unused,
-			   mmfile_t *orig,
+			   mmfile_t *orig, const char *orig_name,
 			   mmfile_t *src1, const char *name1,
 			   mmfile_t *src2, const char *name2,
 			   int flag, int marker_size)
@@ -57,14 +57,12 @@ static int ll_binary_merge(const struct ll_merge_driver *drv_unused,
 static int ll_xdl_merge(const struct ll_merge_driver *drv_unused,
 			mmbuffer_t *result,
 			const char *path,
-			mmfile_t *orig,
+			mmfile_t *orig, const char *orig_name,
 			mmfile_t *src1, const char *name1,
 			mmfile_t *src2, const char *name2,
 			int flag, int marker_size)
 {
 	xmparam_t xmp;
-	int style = 0;
-	int favor = (flag >> 1) & 03;
 
 	if (buffer_is_binary(orig->ptr, orig->size) ||
 	    buffer_is_binary(src1->ptr, src1->size) ||
@@ -73,69 +71,38 @@ static int ll_xdl_merge(const struct ll_merge_driver *drv_unused,
 			path, name1, name2);
 		return ll_binary_merge(drv_unused, result,
 				       path,
-				       orig, src1, name1,
+				       orig, orig_name,
+				       src1, name1,
 				       src2, name2,
 				       flag, marker_size);
 	}
 
 	memset(&xmp, 0, sizeof(xmp));
+	xmp.level = XDL_MERGE_ZEALOUS;
+	xmp.favor= (flag >> 1) & 03;
 	if (git_xmerge_style >= 0)
-		style = git_xmerge_style;
+		xmp.style = git_xmerge_style;
 	if (marker_size > 0)
 		xmp.marker_size = marker_size;
-	return xdl_merge(orig,
-			 src1, name1,
-			 src2, name2,
-			 &xmp, XDL_MERGE_FLAGS(XDL_MERGE_ZEALOUS, style, favor),
-			 result);
+	xmp.ancestor = orig_name;
+	xmp.file1 = name1;
+	xmp.file2 = name2;
+	return xdl_merge(orig, src1, src2, &xmp, result);
 }
 
 static int ll_union_merge(const struct ll_merge_driver *drv_unused,
 			  mmbuffer_t *result,
 			  const char *path_unused,
-			  mmfile_t *orig,
+			  mmfile_t *orig, const char *orig_name,
 			  mmfile_t *src1, const char *name1,
 			  mmfile_t *src2, const char *name2,
 			  int flag, int marker_size)
 {
-	char *src, *dst;
-	long size;
-	int status, saved_style;
-
-	/* We have to force the RCS "merge" style */
-	saved_style = git_xmerge_style;
-	git_xmerge_style = 0;
-	status = ll_xdl_merge(drv_unused, result, path_unused,
-			      orig, src1, NULL, src2, NULL,
-			      flag, marker_size);
-	git_xmerge_style = saved_style;
-	if (status <= 0)
-		return status;
-	size = result->size;
-	src = dst = result->ptr;
-	while (size) {
-		char ch;
-		if ((marker_size < size) &&
-		    (*src == '<' || *src == '=' || *src == '>')) {
-			int i;
-			ch = *src;
-			for (i = 0; i < marker_size; i++)
-				if (src[i] != ch)
-					goto not_a_marker;
-			if (src[marker_size] != '\n')
-				goto not_a_marker;
-			src += marker_size + 1;
-			size -= marker_size + 1;
-			continue;
-		}
-	not_a_marker:
-		do {
-			ch = *src++;
-			*dst++ = ch;
-			size--;
-		} while (ch != '\n' && size);
-	}
-	result->size = dst - result->ptr;
+	/* Use union favor */
+	flag = (flag & 1) | (XDL_MERGE_FAVOR_UNION << 1);
+	return ll_xdl_merge(drv_unused, result, path_unused,
+			    orig, NULL, src1, NULL, src2, NULL,
+			    flag, marker_size);
 	return 0;
 }
 
@@ -165,7 +132,7 @@ static void create_temp(mmfile_t *src, char *path)
 static int ll_ext_merge(const struct ll_merge_driver *fn,
 			mmbuffer_t *result,
 			const char *path,
-			mmfile_t *orig,
+			mmfile_t *orig, const char *orig_name,
 			mmfile_t *src1, const char *name1,
 			mmfile_t *src2, const char *name2,
 			int flag, int marker_size)
@@ -356,7 +323,7 @@ static int git_path_check_merge(const char *path, struct git_attr_check check[2]
 
 int ll_merge(mmbuffer_t *result_buf,
 	     const char *path,
-	     mmfile_t *ancestor,
+	     mmfile_t *ancestor, const char *ancestor_label,
 	     mmfile_t *ours, const char *our_label,
 	     mmfile_t *theirs, const char *their_label,
 	     int flag)
@@ -378,7 +345,7 @@ int ll_merge(mmbuffer_t *result_buf,
 	driver = find_ll_merge_driver(ll_driver_name);
 	if (virtual_ancestor && driver->recursive)
 		driver = find_ll_merge_driver(driver->recursive);
-	return driver->fn(driver, result_buf, path, ancestor,
+	return driver->fn(driver, result_buf, path, ancestor, ancestor_label,
 			  ours, our_label, theirs, their_label,
 			  flag, marker_size);
 }
diff --git a/ll-merge.h b/ll-merge.h
index 57889227b1..57754cc8ca 100644
--- a/ll-merge.h
+++ b/ll-merge.h
@@ -7,7 +7,7 @@
 
 int ll_merge(mmbuffer_t *result_buf,
 	     const char *path,
-	     mmfile_t *ancestor,
+	     mmfile_t *ancestor, const char *ancestor_label,
 	     mmfile_t *ours, const char *our_label,
 	     mmfile_t *theirs, const char *their_label,
 	     int flag);
diff --git a/log-tree.c b/log-tree.c
index 27afcf6972..d3ae969f60 100644
--- a/log-tree.c
+++ b/log-tree.c
@@ -514,6 +514,16 @@ static int log_tree_diff(struct rev_info *opt, struct commit *commit, struct log
 			return 0;
 		else if (opt->combine_merges)
 			return do_diff_combined(opt, commit);
+		else if (opt->first_parent_only) {
+			/*
+			 * Generate merge log entry only for the first
+			 * parent, showing summary diff of the others
+			 * we merged _in_.
+			 */
+			diff_tree_sha1(parents->item->object.sha1, sha1, "", &opt->diffopt);
+			log_tree_diff_flush(opt);
+			return !opt->loginfo;
+		}
 
 		/* If we show individual diffs, show the parent info */
 		log->parent = parents->item;
diff --git a/merge-file.c b/merge-file.c
index fd34d76e15..db4d0d50d3 100644
--- a/merge-file.c
+++ b/merge-file.c
@@ -30,7 +30,13 @@ static void *three_way_filemerge(const char *path, mmfile_t *base, mmfile_t *our
 	int merge_status;
 	mmbuffer_t res;
 
-	merge_status = ll_merge(&res, path, base,
+	/*
+	 * This function is only used by cmd_merge_tree, which
+	 * does not respect the merge.conflictstyle option.
+	 * There is no need to worry about a label for the
+	 * common ancestor.
+	 */
+	merge_status = ll_merge(&res, path, base, NULL,
 				our, ".our", their, ".their", 0);
 	if (merge_status < 0)
 		return NULL;
@@ -60,7 +66,7 @@ static int generate_common_file(mmfile_t *res, mmfile_t *f1, mmfile_t *f2)
 	xdemitcb_t ecb;
 
 	memset(&xpp, 0, sizeof(xpp));
-	xpp.flags = XDF_NEED_MINIMAL;
+	xpp.flags = 0;
 	memset(&xecfg, 0, sizeof(xecfg));
 	xecfg.ctxlen = 3;
 	xecfg.flags = XDL_EMIT_COMMON;
diff --git a/merge-recursive.c b/merge-recursive.c
index cb53b01c19..206c103635 100644
--- a/merge-recursive.c
+++ b/merge-recursive.c
@@ -409,7 +409,7 @@ static int remove_file(struct merge_options *o, int clean,
 			return -1;
 	}
 	if (update_working_directory) {
-		if (remove_path(path) && errno != ENOENT)
+		if (remove_path(path))
 			return -1;
 	}
 	return 0;
@@ -599,23 +599,6 @@ struct merge_file_info
 		 merge:1;
 };
 
-static void fill_mm(const unsigned char *sha1, mmfile_t *mm)
-{
-	unsigned long size;
-	enum object_type type;
-
-	if (!hashcmp(sha1, null_sha1)) {
-		mm->ptr = xstrdup("");
-		mm->size = 0;
-		return;
-	}
-
-	mm->ptr = read_sha1_file(sha1, &type, &size);
-	if (!mm->ptr || type != OBJ_BLOB)
-		die("unable to read blob object %s", sha1_to_hex(sha1));
-	mm->size = size;
-}
-
 static int merge_3way(struct merge_options *o,
 		      mmbuffer_t *result_buf,
 		      struct diff_filespec *one,
@@ -625,7 +608,7 @@ static int merge_3way(struct merge_options *o,
 		      const char *branch2)
 {
 	mmfile_t orig, src1, src2;
-	char *name1, *name2;
+	char *base_name, *name1, *name2;
 	int merge_status;
 	int favor;
 
@@ -645,19 +628,24 @@ static int merge_3way(struct merge_options *o,
 		}
 	}
 
-	if (strcmp(a->path, b->path)) {
+	if (strcmp(a->path, b->path) ||
+	    (o->ancestor != NULL && strcmp(a->path, one->path) != 0)) {
+		base_name = o->ancestor == NULL ? NULL :
+			xstrdup(mkpath("%s:%s", o->ancestor, one->path));
 		name1 = xstrdup(mkpath("%s:%s", branch1, a->path));
 		name2 = xstrdup(mkpath("%s:%s", branch2, b->path));
 	} else {
+		base_name = o->ancestor == NULL ? NULL :
+			xstrdup(mkpath("%s", o->ancestor));
 		name1 = xstrdup(mkpath("%s", branch1));
 		name2 = xstrdup(mkpath("%s", branch2));
 	}
 
-	fill_mm(one->sha1, &orig);
-	fill_mm(a->sha1, &src1);
-	fill_mm(b->sha1, &src2);
+	read_mmblob(&orig, one->sha1);
+	read_mmblob(&src1, a->sha1);
+	read_mmblob(&src2, b->sha1);
 
-	merge_status = ll_merge(result_buf, a->path, &orig,
+	merge_status = ll_merge(result_buf, a->path, &orig, base_name,
 				&src1, name1, &src2, name2,
 				(!!o->call_depth) | (favor << 1));
 
@@ -1359,6 +1347,7 @@ int merge_recursive(struct merge_options *o,
 	if (!o->call_depth)
 		read_cache();
 
+	o->ancestor = "merged common ancestors";
 	clean = merge_trees(o, h1->tree, h2->tree, merged_common_ancestors->tree,
 			    &mrtree);
 
diff --git a/merge-recursive.h b/merge-recursive.h
index be8410ad18..d1192f56d7 100644
--- a/merge-recursive.h
+++ b/merge-recursive.h
@@ -4,6 +4,7 @@
 #include "string-list.h"
 
 struct merge_options {
+	const char *ancestor;
 	const char *branch1;
 	const char *branch2;
 	enum {
diff --git a/notes.c b/notes.c
index 023adce982..e425e19827 100644
--- a/notes.c
+++ b/notes.c
@@ -1,10 +1,12 @@
 #include "cache.h"
-#include "commit.h"
 #include "notes.h"
-#include "refs.h"
+#include "blob.h"
+#include "tree.h"
 #include "utf8.h"
 #include "strbuf.h"
 #include "tree-walk.h"
+#include "string-list.h"
+#include "refs.h"
 
 /*
  * Use a non-balancing simple 16-tree structure with struct int_node as
@@ -25,10 +27,10 @@ struct int_node {
 /*
  * Leaf nodes come in two variants, note entries and subtree entries,
  * distinguished by the LSb of the leaf node pointer (see above).
- * As a note entry, the key is the SHA1 of the referenced commit, and the
+ * As a note entry, the key is the SHA1 of the referenced object, and the
  * value is the SHA1 of the note object.
  * As a subtree entry, the key is the prefix SHA1 (w/trailing NULs) of the
- * referenced commit, using the last byte of the key to store the length of
+ * referenced object, using the last byte of the key to store the length of
  * the prefix. The value is the SHA1 of the tree object containing the notes
  * subtree.
  */
@@ -37,6 +39,21 @@ struct leaf_node {
 	unsigned char val_sha1[20];
 };
 
+/*
+ * A notes tree may contain entries that are not notes, and that do not follow
+ * the naming conventions of notes. There are typically none/few of these, but
+ * we still need to keep track of them. Keep a simple linked list sorted alpha-
+ * betically on the non-note path. The list is populated when parsing tree
+ * objects in load_subtree(), and the non-notes are correctly written back into
+ * the tree objects produced by write_notes_tree().
+ */
+struct non_note {
+	struct non_note *next; /* grounded (last->next == NULL) */
+	char *path;
+	unsigned int mode;
+	unsigned char sha1[20];
+};
+
 #define PTR_TYPE_NULL     0
 #define PTR_TYPE_INTERNAL 1
 #define PTR_TYPE_NOTE     2
@@ -46,17 +63,18 @@ struct leaf_node {
 #define CLR_PTR_TYPE(ptr)       ((void *) ((uintptr_t) (ptr) & ~3))
 #define SET_PTR_TYPE(ptr, type) ((void *) ((uintptr_t) (ptr) | (type)))
 
-#define GET_NIBBLE(n, sha1) (((sha1[n >> 1]) >> ((~n & 0x01) << 2)) & 0x0f)
+#define GET_NIBBLE(n, sha1) (((sha1[(n) >> 1]) >> ((~(n) & 0x01) << 2)) & 0x0f)
 
 #define SUBTREE_SHA1_PREFIXCMP(key_sha1, subtree_sha1) \
 	(memcmp(key_sha1, subtree_sha1, subtree_sha1[19]))
 
-static struct int_node root_node;
+struct notes_tree default_notes_tree;
 
-static int initialized;
+static struct string_list display_notes_refs;
+static struct notes_tree **display_notes_trees;
 
-static void load_subtree(struct leaf_node *subtree, struct int_node *node,
-		unsigned int n);
+static void load_subtree(struct notes_tree *t, struct leaf_node *subtree,
+		struct int_node *node, unsigned int n);
 
 /*
  * Search the tree until the appropriate location for the given key is found:
@@ -73,7 +91,7 @@ static void load_subtree(struct leaf_node *subtree, struct int_node *node,
  *      - an unused leaf node (NULL)
  *      In any case, set *tree and *n, and return pointer to the tree location.
  */
-static void **note_tree_search(struct int_node **tree,
+static void **note_tree_search(struct notes_tree *t, struct int_node **tree,
 		unsigned char *n, const unsigned char *key_sha1)
 {
 	struct leaf_node *l;
@@ -85,27 +103,27 @@ static void **note_tree_search(struct int_node **tree,
 		if (!SUBTREE_SHA1_PREFIXCMP(key_sha1, l->key_sha1)) {
 			/* unpack tree and resume search */
 			(*tree)->a[0] = NULL;
-			load_subtree(l, *tree, *n);
+			load_subtree(t, l, *tree, *n);
 			free(l);
-			return note_tree_search(tree, n, key_sha1);
+			return note_tree_search(t, tree, n, key_sha1);
 		}
 	}
 
 	i = GET_NIBBLE(*n, key_sha1);
 	p = (*tree)->a[i];
-	switch(GET_PTR_TYPE(p)) {
+	switch (GET_PTR_TYPE(p)) {
 	case PTR_TYPE_INTERNAL:
 		*tree = CLR_PTR_TYPE(p);
 		(*n)++;
-		return note_tree_search(tree, n, key_sha1);
+		return note_tree_search(t, tree, n, key_sha1);
 	case PTR_TYPE_SUBTREE:
 		l = (struct leaf_node *) CLR_PTR_TYPE(p);
 		if (!SUBTREE_SHA1_PREFIXCMP(key_sha1, l->key_sha1)) {
 			/* unpack tree and resume search */
 			(*tree)->a[i] = NULL;
-			load_subtree(l, *tree, *n);
+			load_subtree(t, l, *tree, *n);
 			free(l);
-			return note_tree_search(tree, n, key_sha1);
+			return note_tree_search(t, tree, n, key_sha1);
 		}
 		/* fall through */
 	default:
@@ -118,10 +136,11 @@ static void **note_tree_search(struct int_node **tree,
  * Search to the tree location appropriate for the given key:
  * If a note entry with matching key, return the note entry, else return NULL.
  */
-static struct leaf_node *note_tree_find(struct int_node *tree, unsigned char n,
+static struct leaf_node *note_tree_find(struct notes_tree *t,
+		struct int_node *tree, unsigned char n,
 		const unsigned char *key_sha1)
 {
-	void **p = note_tree_search(&tree, &n, key_sha1);
+	void **p = note_tree_search(t, &tree, &n, key_sha1);
 	if (GET_PTR_TYPE(*p) == PTR_TYPE_NOTE) {
 		struct leaf_node *l = (struct leaf_node *) CLR_PTR_TYPE(*p);
 		if (!hashcmp(key_sha1, l->key_sha1))
@@ -130,55 +149,12 @@ static struct leaf_node *note_tree_find(struct int_node *tree, unsigned char n,
 	return NULL;
 }
 
-/* Create a new blob object by concatenating the two given blob objects */
-static int concatenate_notes(unsigned char *cur_sha1,
-		const unsigned char *new_sha1)
-{
-	char *cur_msg, *new_msg, *buf;
-	unsigned long cur_len, new_len, buf_len;
-	enum object_type cur_type, new_type;
-	int ret;
-
-	/* read in both note blob objects */
-	new_msg = read_sha1_file(new_sha1, &new_type, &new_len);
-	if (!new_msg || !new_len || new_type != OBJ_BLOB) {
-		free(new_msg);
-		return 0;
-	}
-	cur_msg = read_sha1_file(cur_sha1, &cur_type, &cur_len);
-	if (!cur_msg || !cur_len || cur_type != OBJ_BLOB) {
-		free(cur_msg);
-		free(new_msg);
-		hashcpy(cur_sha1, new_sha1);
-		return 0;
-	}
-
-	/* we will separate the notes by a newline anyway */
-	if (cur_msg[cur_len - 1] == '\n')
-		cur_len--;
-
-	/* concatenate cur_msg and new_msg into buf */
-	buf_len = cur_len + 1 + new_len;
-	buf = (char *) xmalloc(buf_len);
-	memcpy(buf, cur_msg, cur_len);
-	buf[cur_len] = '\n';
-	memcpy(buf + cur_len + 1, new_msg, new_len);
-
-	free(cur_msg);
-	free(new_msg);
-
-	/* create a new blob object from buf */
-	ret = write_sha1_file(buf, buf_len, "blob", cur_sha1);
-	free(buf);
-	return ret;
-}
-
 /*
  * To insert a leaf_node:
  * Search to the tree location appropriate for the given leaf_node's key:
  * - If location is unused (NULL), store the tweaked pointer directly there
  * - If location holds a note entry that matches the note-to-be-inserted, then
- *   concatenate the two notes.
+ *   combine the two notes (by calling the given combine_notes function).
  * - If location holds a note entry that matches the subtree-to-be-inserted,
  *   then unpack the subtree-to-be-inserted into the location.
  * - If location holds a matching subtree entry, unpack the subtree at that
@@ -186,16 +162,17 @@ static int concatenate_notes(unsigned char *cur_sha1,
  * - Else, create a new int_node, holding both the node-at-location and the
  *   node-to-be-inserted, and store the new int_node into the location.
  */
-static void note_tree_insert(struct int_node *tree, unsigned char n,
-		struct leaf_node *entry, unsigned char type)
+static void note_tree_insert(struct notes_tree *t, struct int_node *tree,
+		unsigned char n, struct leaf_node *entry, unsigned char type,
+		combine_notes_fn combine_notes)
 {
 	struct int_node *new_node;
 	struct leaf_node *l;
-	void **p = note_tree_search(&tree, &n, entry->key_sha1);
+	void **p = note_tree_search(t, &tree, &n, entry->key_sha1);
 
 	assert(GET_PTR_TYPE(entry) == 0); /* no type bits set */
 	l = (struct leaf_node *) CLR_PTR_TYPE(*p);
-	switch(GET_PTR_TYPE(*p)) {
+	switch (GET_PTR_TYPE(*p)) {
 	case PTR_TYPE_NULL:
 		assert(!*p);
 		*p = SET_PTR_TYPE(entry, type);
@@ -208,12 +185,11 @@ static void note_tree_insert(struct int_node *tree, unsigned char n,
 				if (!hashcmp(l->val_sha1, entry->val_sha1))
 					return;
 
-				if (concatenate_notes(l->val_sha1,
-						entry->val_sha1))
-					die("failed to concatenate note %s "
-					    "into note %s for commit %s",
-					    sha1_to_hex(entry->val_sha1),
+				if (combine_notes(l->val_sha1, entry->val_sha1))
+					die("failed to combine notes %s and %s"
+					    " for object %s",
 					    sha1_to_hex(l->val_sha1),
+					    sha1_to_hex(entry->val_sha1),
 					    sha1_to_hex(l->key_sha1));
 				free(entry);
 				return;
@@ -223,7 +199,7 @@ static void note_tree_insert(struct int_node *tree, unsigned char n,
 			if (!SUBTREE_SHA1_PREFIXCMP(l->key_sha1,
 						    entry->key_sha1)) {
 				/* unpack 'entry' */
-				load_subtree(entry, tree, n);
+				load_subtree(t, entry, tree, n);
 				free(entry);
 				return;
 			}
@@ -234,9 +210,10 @@ static void note_tree_insert(struct int_node *tree, unsigned char n,
 		if (!SUBTREE_SHA1_PREFIXCMP(entry->key_sha1, l->key_sha1)) {
 			/* unpack 'l' and restart insert */
 			*p = NULL;
-			load_subtree(l, tree, n);
+			load_subtree(t, l, tree, n);
 			free(l);
-			note_tree_insert(tree, n, entry, type);
+			note_tree_insert(t, tree, n, entry, type,
+					 combine_notes);
 			return;
 		}
 		break;
@@ -246,9 +223,83 @@ static void note_tree_insert(struct int_node *tree, unsigned char n,
 	assert(GET_PTR_TYPE(*p) == PTR_TYPE_NOTE ||
 	       GET_PTR_TYPE(*p) == PTR_TYPE_SUBTREE);
 	new_node = (struct int_node *) xcalloc(sizeof(struct int_node), 1);
-	note_tree_insert(new_node, n + 1, l, GET_PTR_TYPE(*p));
+	note_tree_insert(t, new_node, n + 1, l, GET_PTR_TYPE(*p),
+			 combine_notes);
 	*p = SET_PTR_TYPE(new_node, PTR_TYPE_INTERNAL);
-	note_tree_insert(new_node, n + 1, entry, type);
+	note_tree_insert(t, new_node, n + 1, entry, type, combine_notes);
+}
+
+/*
+ * How to consolidate an int_node:
+ * If there are > 1 non-NULL entries, give up and return non-zero.
+ * Otherwise replace the int_node at the given index in the given parent node
+ * with the only entry (or a NULL entry if no entries) from the given tree,
+ * and return 0.
+ */
+static int note_tree_consolidate(struct int_node *tree,
+	struct int_node *parent, unsigned char index)
+{
+	unsigned int i;
+	void *p = NULL;
+
+	assert(tree && parent);
+	assert(CLR_PTR_TYPE(parent->a[index]) == tree);
+
+	for (i = 0; i < 16; i++) {
+		if (GET_PTR_TYPE(tree->a[i]) != PTR_TYPE_NULL) {
+			if (p) /* more than one entry */
+				return -2;
+			p = tree->a[i];
+		}
+	}
+
+	/* replace tree with p in parent[index] */
+	parent->a[index] = p;
+	free(tree);
+	return 0;
+}
+
+/*
+ * To remove a leaf_node:
+ * Search to the tree location appropriate for the given leaf_node's key:
+ * - If location does not hold a matching entry, abort and do nothing.
+ * - Replace the matching leaf_node with a NULL entry (and free the leaf_node).
+ * - Consolidate int_nodes repeatedly, while walking up the tree towards root.
+ */
+static void note_tree_remove(struct notes_tree *t, struct int_node *tree,
+		unsigned char n, struct leaf_node *entry)
+{
+	struct leaf_node *l;
+	struct int_node *parent_stack[20];
+	unsigned char i, j;
+	void **p = note_tree_search(t, &tree, &n, entry->key_sha1);
+
+	assert(GET_PTR_TYPE(entry) == 0); /* no type bits set */
+	if (GET_PTR_TYPE(*p) != PTR_TYPE_NOTE)
+		return; /* type mismatch, nothing to remove */
+	l = (struct leaf_node *) CLR_PTR_TYPE(*p);
+	if (hashcmp(l->key_sha1, entry->key_sha1))
+		return; /* key mismatch, nothing to remove */
+
+	/* we have found a matching entry */
+	free(l);
+	*p = SET_PTR_TYPE(NULL, PTR_TYPE_NULL);
+
+	/* consolidate this tree level, and parent levels, if possible */
+	if (!n)
+		return; /* cannot consolidate top level */
+	/* first, build stack of ancestors between root and current node */
+	parent_stack[0] = t->root;
+	for (i = 0; i < n; i++) {
+		j = GET_NIBBLE(i, entry->key_sha1);
+		parent_stack[i + 1] = CLR_PTR_TYPE(parent_stack[i]->a[j]);
+	}
+	assert(i == n && parent_stack[i] == tree);
+	/* next, unwind stack until note_tree_consolidate() is done */
+	while (i > 0 &&
+	       !note_tree_consolidate(parent_stack[i], parent_stack[i - 1],
+				      GET_NIBBLE(i - 1, entry->key_sha1)))
+		i--;
 }
 
 /* Free the entire notes data contained in the given tree */
@@ -257,7 +308,7 @@ static void note_tree_free(struct int_node *tree)
 	unsigned int i;
 	for (i = 0; i < 16; i++) {
 		void *p = tree->a[i];
-		switch(GET_PTR_TYPE(p)) {
+		switch (GET_PTR_TYPE(p)) {
 		case PTR_TYPE_INTERNAL:
 			note_tree_free(CLR_PTR_TYPE(p));
 			/* fall through */
@@ -274,7 +325,7 @@ static void note_tree_free(struct int_node *tree)
  * - hex_len  - Length of above segment. Must be multiple of 2 between 0 and 40
  * - sha1     - Partial SHA1 value is written here
  * - sha1_len - Max #bytes to store in sha1, Must be >= hex_len / 2, and < 20
- * Returns -1 on error (invalid arguments or invalid SHA1 (not in hex format).
+ * Returns -1 on error (invalid arguments or invalid SHA1 (not in hex format)).
  * Otherwise, returns number of bytes written to sha1 (i.e. hex_len / 2).
  * Pads sha1 with NULs up to sha1_len (not included in returned length).
  */
@@ -296,14 +347,67 @@ static int get_sha1_hex_segment(const char *hex, unsigned int hex_len,
 	return len;
 }
 
-static void load_subtree(struct leaf_node *subtree, struct int_node *node,
-		unsigned int n)
+static int non_note_cmp(const struct non_note *a, const struct non_note *b)
+{
+	return strcmp(a->path, b->path);
+}
+
+static void add_non_note(struct notes_tree *t, const char *path,
+		unsigned int mode, const unsigned char *sha1)
+{
+	struct non_note *p = t->prev_non_note, *n;
+	n = (struct non_note *) xmalloc(sizeof(struct non_note));
+	n->next = NULL;
+	n->path = xstrdup(path);
+	n->mode = mode;
+	hashcpy(n->sha1, sha1);
+	t->prev_non_note = n;
+
+	if (!t->first_non_note) {
+		t->first_non_note = n;
+		return;
+	}
+
+	if (non_note_cmp(p, n) < 0)
+		; /* do nothing  */
+	else if (non_note_cmp(t->first_non_note, n) <= 0)
+		p = t->first_non_note;
+	else {
+		/* n sorts before t->first_non_note */
+		n->next = t->first_non_note;
+		t->first_non_note = n;
+		return;
+	}
+
+	/* n sorts equal or after p */
+	while (p->next && non_note_cmp(p->next, n) <= 0)
+		p = p->next;
+
+	if (non_note_cmp(p, n) == 0) { /* n ~= p; overwrite p with n */
+		assert(strcmp(p->path, n->path) == 0);
+		p->mode = n->mode;
+		hashcpy(p->sha1, n->sha1);
+		free(n);
+		t->prev_non_note = p;
+		return;
+	}
+
+	/* n sorts between p and p->next */
+	n->next = p->next;
+	p->next = n;
+}
+
+static void load_subtree(struct notes_tree *t, struct leaf_node *subtree,
+		struct int_node *node, unsigned int n)
 {
-	unsigned char commit_sha1[20];
+	unsigned char object_sha1[20];
 	unsigned int prefix_len;
 	void *buf;
 	struct tree_desc desc;
 	struct name_entry entry;
+	int len, path_len;
+	unsigned char type;
+	struct leaf_node *l;
 
 	buf = fill_tree_descriptor(&desc, subtree->val_sha1);
 	if (!buf)
@@ -312,86 +416,721 @@ static void load_subtree(struct leaf_node *subtree, struct int_node *node,
 
 	prefix_len = subtree->key_sha1[19];
 	assert(prefix_len * 2 >= n);
-	memcpy(commit_sha1, subtree->key_sha1, prefix_len);
+	memcpy(object_sha1, subtree->key_sha1, prefix_len);
 	while (tree_entry(&desc, &entry)) {
-		int len = get_sha1_hex_segment(entry.path, strlen(entry.path),
-				commit_sha1 + prefix_len, 20 - prefix_len);
+		path_len = strlen(entry.path);
+		len = get_sha1_hex_segment(entry.path, path_len,
+				object_sha1 + prefix_len, 20 - prefix_len);
 		if (len < 0)
-			continue; /* entry.path is not a SHA1 sum. Skip */
+			goto handle_non_note; /* entry.path is not a SHA1 */
 		len += prefix_len;
 
 		/*
-		 * If commit SHA1 is complete (len == 20), assume note object
-		 * If commit SHA1 is incomplete (len < 20), assume note subtree
+		 * If object SHA1 is complete (len == 20), assume note object
+		 * If object SHA1 is incomplete (len < 20), and current
+		 * component consists of 2 hex chars, assume note subtree
 		 */
 		if (len <= 20) {
-			unsigned char type = PTR_TYPE_NOTE;
-			struct leaf_node *l = (struct leaf_node *)
+			type = PTR_TYPE_NOTE;
+			l = (struct leaf_node *)
 				xcalloc(sizeof(struct leaf_node), 1);
-			hashcpy(l->key_sha1, commit_sha1);
+			hashcpy(l->key_sha1, object_sha1);
 			hashcpy(l->val_sha1, entry.sha1);
 			if (len < 20) {
-				if (!S_ISDIR(entry.mode))
-					continue; /* entry cannot be subtree */
+				if (!S_ISDIR(entry.mode) || path_len != 2)
+					goto handle_non_note; /* not subtree */
 				l->key_sha1[19] = (unsigned char) len;
 				type = PTR_TYPE_SUBTREE;
 			}
-			note_tree_insert(node, n, l, type);
+			note_tree_insert(t, node, n, l, type,
+					 combine_notes_concatenate);
+		}
+		continue;
+
+handle_non_note:
+		/*
+		 * Determine full path for this non-note entry:
+		 * The filename is already found in entry.path, but the
+		 * directory part of the path must be deduced from the subtree
+		 * containing this entry. We assume here that the overall notes
+		 * tree follows a strict byte-based progressive fanout
+		 * structure (i.e. using 2/38, 2/2/36, etc. fanouts, and not
+		 * e.g. 4/36 fanout). This means that if a non-note is found at
+		 * path "dead/beef", the following code will register it as
+		 * being found on "de/ad/beef".
+		 * On the other hand, if you use such non-obvious non-note
+		 * paths in the middle of a notes tree, you deserve what's
+		 * coming to you ;). Note that for non-notes that are not
+		 * SHA1-like at the top level, there will be no problems.
+		 *
+		 * To conclude, it is strongly advised to make sure non-notes
+		 * have at least one non-hex character in the top-level path
+		 * component.
+		 */
+		{
+			char non_note_path[PATH_MAX];
+			char *p = non_note_path;
+			const char *q = sha1_to_hex(subtree->key_sha1);
+			int i;
+			for (i = 0; i < prefix_len; i++) {
+				*p++ = *q++;
+				*p++ = *q++;
+				*p++ = '/';
+			}
+			strcpy(p, entry.path);
+			add_non_note(t, non_note_path, entry.mode, entry.sha1);
+		}
+	}
+	free(buf);
+}
+
+/*
+ * Determine optimal on-disk fanout for this part of the notes tree
+ *
+ * Given a (sub)tree and the level in the internal tree structure, determine
+ * whether or not the given existing fanout should be expanded for this
+ * (sub)tree.
+ *
+ * Values of the 'fanout' variable:
+ * - 0: No fanout (all notes are stored directly in the root notes tree)
+ * - 1: 2/38 fanout
+ * - 2: 2/2/36 fanout
+ * - 3: 2/2/2/34 fanout
+ * etc.
+ */
+static unsigned char determine_fanout(struct int_node *tree, unsigned char n,
+		unsigned char fanout)
+{
+	/*
+	 * The following is a simple heuristic that works well in practice:
+	 * For each even-numbered 16-tree level (remember that each on-disk
+	 * fanout level corresponds to _two_ 16-tree levels), peek at all 16
+	 * entries at that tree level. If all of them are either int_nodes or
+	 * subtree entries, then there are likely plenty of notes below this
+	 * level, so we return an incremented fanout.
+	 */
+	unsigned int i;
+	if ((n % 2) || (n > 2 * fanout))
+		return fanout;
+	for (i = 0; i < 16; i++) {
+		switch (GET_PTR_TYPE(tree->a[i])) {
+		case PTR_TYPE_SUBTREE:
+		case PTR_TYPE_INTERNAL:
+			continue;
+		default:
+			return fanout;
+		}
+	}
+	return fanout + 1;
+}
+
+static void construct_path_with_fanout(const unsigned char *sha1,
+		unsigned char fanout, char *path)
+{
+	unsigned int i = 0, j = 0;
+	const char *hex_sha1 = sha1_to_hex(sha1);
+	assert(fanout < 20);
+	while (fanout) {
+		path[i++] = hex_sha1[j++];
+		path[i++] = hex_sha1[j++];
+		path[i++] = '/';
+		fanout--;
+	}
+	strcpy(path + i, hex_sha1 + j);
+}
+
+static int for_each_note_helper(struct notes_tree *t, struct int_node *tree,
+		unsigned char n, unsigned char fanout, int flags,
+		each_note_fn fn, void *cb_data)
+{
+	unsigned int i;
+	void *p;
+	int ret = 0;
+	struct leaf_node *l;
+	static char path[40 + 19 + 1];  /* hex SHA1 + 19 * '/' + NUL */
+
+	fanout = determine_fanout(tree, n, fanout);
+	for (i = 0; i < 16; i++) {
+redo:
+		p = tree->a[i];
+		switch (GET_PTR_TYPE(p)) {
+		case PTR_TYPE_INTERNAL:
+			/* recurse into int_node */
+			ret = for_each_note_helper(t, CLR_PTR_TYPE(p), n + 1,
+				fanout, flags, fn, cb_data);
+			break;
+		case PTR_TYPE_SUBTREE:
+			l = (struct leaf_node *) CLR_PTR_TYPE(p);
+			/*
+			 * Subtree entries in the note tree represent parts of
+			 * the note tree that have not yet been explored. There
+			 * is a direct relationship between subtree entries at
+			 * level 'n' in the tree, and the 'fanout' variable:
+			 * Subtree entries at level 'n <= 2 * fanout' should be
+			 * preserved, since they correspond exactly to a fanout
+			 * directory in the on-disk structure. However, subtree
+			 * entries at level 'n > 2 * fanout' should NOT be
+			 * preserved, but rather consolidated into the above
+			 * notes tree level. We achieve this by unconditionally
+			 * unpacking subtree entries that exist below the
+			 * threshold level at 'n = 2 * fanout'.
+			 */
+			if (n <= 2 * fanout &&
+			    flags & FOR_EACH_NOTE_YIELD_SUBTREES) {
+				/* invoke callback with subtree */
+				unsigned int path_len =
+					l->key_sha1[19] * 2 + fanout;
+				assert(path_len < 40 + 19);
+				construct_path_with_fanout(l->key_sha1, fanout,
+							   path);
+				/* Create trailing slash, if needed */
+				if (path[path_len - 1] != '/')
+					path[path_len++] = '/';
+				path[path_len] = '\0';
+				ret = fn(l->key_sha1, l->val_sha1, path,
+					 cb_data);
+			}
+			if (n > fanout * 2 ||
+			    !(flags & FOR_EACH_NOTE_DONT_UNPACK_SUBTREES)) {
+				/* unpack subtree and resume traversal */
+				tree->a[i] = NULL;
+				load_subtree(t, l, tree, n);
+				free(l);
+				goto redo;
+			}
+			break;
+		case PTR_TYPE_NOTE:
+			l = (struct leaf_node *) CLR_PTR_TYPE(p);
+			construct_path_with_fanout(l->key_sha1, fanout, path);
+			ret = fn(l->key_sha1, l->val_sha1, path, cb_data);
+			break;
+		}
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+struct tree_write_stack {
+	struct tree_write_stack *next;
+	struct strbuf buf;
+	char path[2]; /* path to subtree in next, if any */
+};
+
+static inline int matches_tree_write_stack(struct tree_write_stack *tws,
+		const char *full_path)
+{
+	return  full_path[0] == tws->path[0] &&
+		full_path[1] == tws->path[1] &&
+		full_path[2] == '/';
+}
+
+static void write_tree_entry(struct strbuf *buf, unsigned int mode,
+		const char *path, unsigned int path_len, const
+		unsigned char *sha1)
+{
+	strbuf_addf(buf, "%o %.*s%c", mode, path_len, path, '\0');
+	strbuf_add(buf, sha1, 20);
+}
+
+static void tree_write_stack_init_subtree(struct tree_write_stack *tws,
+		const char *path)
+{
+	struct tree_write_stack *n;
+	assert(!tws->next);
+	assert(tws->path[0] == '\0' && tws->path[1] == '\0');
+	n = (struct tree_write_stack *)
+		xmalloc(sizeof(struct tree_write_stack));
+	n->next = NULL;
+	strbuf_init(&n->buf, 256 * (32 + 40)); /* assume 256 entries per tree */
+	n->path[0] = n->path[1] = '\0';
+	tws->next = n;
+	tws->path[0] = path[0];
+	tws->path[1] = path[1];
+}
+
+static int tree_write_stack_finish_subtree(struct tree_write_stack *tws)
+{
+	int ret;
+	struct tree_write_stack *n = tws->next;
+	unsigned char s[20];
+	if (n) {
+		ret = tree_write_stack_finish_subtree(n);
+		if (ret)
+			return ret;
+		ret = write_sha1_file(n->buf.buf, n->buf.len, tree_type, s);
+		if (ret)
+			return ret;
+		strbuf_release(&n->buf);
+		free(n);
+		tws->next = NULL;
+		write_tree_entry(&tws->buf, 040000, tws->path, 2, s);
+		tws->path[0] = tws->path[1] = '\0';
+	}
+	return 0;
+}
+
+static int write_each_note_helper(struct tree_write_stack *tws,
+		const char *path, unsigned int mode,
+		const unsigned char *sha1)
+{
+	size_t path_len = strlen(path);
+	unsigned int n = 0;
+	int ret;
+
+	/* Determine common part of tree write stack */
+	while (tws && 3 * n < path_len &&
+	       matches_tree_write_stack(tws, path + 3 * n)) {
+		n++;
+		tws = tws->next;
+	}
+
+	/* tws point to last matching tree_write_stack entry */
+	ret = tree_write_stack_finish_subtree(tws);
+	if (ret)
+		return ret;
+
+	/* Start subtrees needed to satisfy path */
+	while (3 * n + 2 < path_len && path[3 * n + 2] == '/') {
+		tree_write_stack_init_subtree(tws, path + 3 * n);
+		n++;
+		tws = tws->next;
+	}
+
+	/* There should be no more directory components in the given path */
+	assert(memchr(path + 3 * n, '/', path_len - (3 * n)) == NULL);
+
+	/* Finally add given entry to the current tree object */
+	write_tree_entry(&tws->buf, mode, path + 3 * n, path_len - (3 * n),
+			 sha1);
+
+	return 0;
+}
+
+struct write_each_note_data {
+	struct tree_write_stack *root;
+	struct non_note *next_non_note;
+};
+
+static int write_each_non_note_until(const char *note_path,
+		struct write_each_note_data *d)
+{
+	struct non_note *n = d->next_non_note;
+	int cmp, ret;
+	while (n && (!note_path || (cmp = strcmp(n->path, note_path)) <= 0)) {
+		if (note_path && cmp == 0)
+			; /* do nothing, prefer note to non-note */
+		else {
+			ret = write_each_note_helper(d->root, n->path, n->mode,
+						     n->sha1);
+			if (ret)
+				return ret;
 		}
+		n = n->next;
+	}
+	d->next_non_note = n;
+	return 0;
+}
+
+static int write_each_note(const unsigned char *object_sha1,
+		const unsigned char *note_sha1, char *note_path,
+		void *cb_data)
+{
+	struct write_each_note_data *d =
+		(struct write_each_note_data *) cb_data;
+	size_t note_path_len = strlen(note_path);
+	unsigned int mode = 0100644;
+
+	if (note_path[note_path_len - 1] == '/') {
+		/* subtree entry */
+		note_path_len--;
+		note_path[note_path_len] = '\0';
+		mode = 040000;
 	}
+	assert(note_path_len <= 40 + 19);
+
+	/* Weave non-note entries into note entries */
+	return  write_each_non_note_until(note_path, d) ||
+		write_each_note_helper(d->root, note_path, mode, note_sha1);
+}
+
+struct note_delete_list {
+	struct note_delete_list *next;
+	const unsigned char *sha1;
+};
+
+static int prune_notes_helper(const unsigned char *object_sha1,
+		const unsigned char *note_sha1, char *note_path,
+		void *cb_data)
+{
+	struct note_delete_list **l = (struct note_delete_list **) cb_data;
+	struct note_delete_list *n;
+
+	if (has_sha1_file(object_sha1))
+		return 0; /* nothing to do for this note */
+
+	/* failed to find object => prune this note */
+	n = (struct note_delete_list *) xmalloc(sizeof(*n));
+	n->next = *l;
+	n->sha1 = object_sha1;
+	*l = n;
+	return 0;
+}
+
+int combine_notes_concatenate(unsigned char *cur_sha1,
+		const unsigned char *new_sha1)
+{
+	char *cur_msg = NULL, *new_msg = NULL, *buf;
+	unsigned long cur_len, new_len, buf_len;
+	enum object_type cur_type, new_type;
+	int ret;
+
+	/* read in both note blob objects */
+	if (!is_null_sha1(new_sha1))
+		new_msg = read_sha1_file(new_sha1, &new_type, &new_len);
+	if (!new_msg || !new_len || new_type != OBJ_BLOB) {
+		free(new_msg);
+		return 0;
+	}
+	if (!is_null_sha1(cur_sha1))
+		cur_msg = read_sha1_file(cur_sha1, &cur_type, &cur_len);
+	if (!cur_msg || !cur_len || cur_type != OBJ_BLOB) {
+		free(cur_msg);
+		free(new_msg);
+		hashcpy(cur_sha1, new_sha1);
+		return 0;
+	}
+
+	/* we will separate the notes by a newline anyway */
+	if (cur_msg[cur_len - 1] == '\n')
+		cur_len--;
+
+	/* concatenate cur_msg and new_msg into buf */
+	buf_len = cur_len + 1 + new_len;
+	buf = (char *) xmalloc(buf_len);
+	memcpy(buf, cur_msg, cur_len);
+	buf[cur_len] = '\n';
+	memcpy(buf + cur_len + 1, new_msg, new_len);
+	free(cur_msg);
+	free(new_msg);
+
+	/* create a new blob object from buf */
+	ret = write_sha1_file(buf, buf_len, blob_type, cur_sha1);
 	free(buf);
+	return ret;
+}
+
+int combine_notes_overwrite(unsigned char *cur_sha1,
+		const unsigned char *new_sha1)
+{
+	hashcpy(cur_sha1, new_sha1);
+	return 0;
+}
+
+int combine_notes_ignore(unsigned char *cur_sha1,
+		const unsigned char *new_sha1)
+{
+	return 0;
+}
+
+static int string_list_add_one_ref(const char *path, const unsigned char *sha1,
+				   int flag, void *cb)
+{
+	struct string_list *refs = cb;
+	if (!unsorted_string_list_has_string(refs, path))
+		string_list_append(path, refs);
+	return 0;
+}
+
+void string_list_add_refs_by_glob(struct string_list *list, const char *glob)
+{
+	if (has_glob_specials(glob)) {
+		for_each_glob_ref(string_list_add_one_ref, glob, list);
+	} else {
+		unsigned char sha1[20];
+		if (get_sha1(glob, sha1))
+			warning("notes ref %s is invalid", glob);
+		if (!unsorted_string_list_has_string(list, glob))
+			string_list_append(glob, list);
+	}
+}
+
+void string_list_add_refs_from_colon_sep(struct string_list *list,
+					 const char *globs)
+{
+	struct strbuf globbuf = STRBUF_INIT;
+	struct strbuf **split;
+	int i;
+
+	strbuf_addstr(&globbuf, globs);
+	split = strbuf_split(&globbuf, ':');
+
+	for (i = 0; split[i]; i++) {
+		if (!split[i]->len)
+			continue;
+		if (split[i]->buf[split[i]->len-1] == ':')
+			strbuf_setlen(split[i], split[i]->len-1);
+		string_list_add_refs_by_glob(list, split[i]->buf);
+	}
+
+	strbuf_list_free(split);
+	strbuf_release(&globbuf);
+}
+
+static int string_list_add_refs_from_list(struct string_list_item *item,
+					  void *cb)
+{
+	struct string_list *list = cb;
+	string_list_add_refs_by_glob(list, item->string);
+	return 0;
+}
+
+static int notes_display_config(const char *k, const char *v, void *cb)
+{
+	int *load_refs = cb;
+
+	if (*load_refs && !strcmp(k, "notes.displayref")) {
+		if (!v)
+			config_error_nonbool(k);
+		string_list_add_refs_by_glob(&display_notes_refs, v);
+	}
+
+	return 0;
 }
 
-static void initialize_notes(const char *notes_ref_name)
+static const char *default_notes_ref(void)
 {
-	unsigned char sha1[20], commit_sha1[20];
+	const char *notes_ref = NULL;
+	if (!notes_ref)
+		notes_ref = getenv(GIT_NOTES_REF_ENVIRONMENT);
+	if (!notes_ref)
+		notes_ref = notes_ref_name; /* value of core.notesRef config */
+	if (!notes_ref)
+		notes_ref = GIT_NOTES_DEFAULT_REF;
+	return notes_ref;
+}
+
+void init_notes(struct notes_tree *t, const char *notes_ref,
+		combine_notes_fn combine_notes, int flags)
+{
+	unsigned char sha1[20], object_sha1[20];
 	unsigned mode;
 	struct leaf_node root_tree;
 
-	if (!notes_ref_name || read_ref(notes_ref_name, commit_sha1) ||
-	    get_tree_entry(commit_sha1, "", sha1, &mode))
+	if (!t)
+		t = &default_notes_tree;
+	assert(!t->initialized);
+
+	if (!notes_ref)
+		notes_ref = default_notes_ref();
+
+	if (!combine_notes)
+		combine_notes = combine_notes_concatenate;
+
+	t->root = (struct int_node *) xcalloc(sizeof(struct int_node), 1);
+	t->first_non_note = NULL;
+	t->prev_non_note = NULL;
+	t->ref = notes_ref ? xstrdup(notes_ref) : NULL;
+	t->combine_notes = combine_notes;
+	t->initialized = 1;
+	t->dirty = 0;
+
+	if (flags & NOTES_INIT_EMPTY || !notes_ref ||
+	    read_ref(notes_ref, object_sha1))
 		return;
+	if (get_tree_entry(object_sha1, "", sha1, &mode))
+		die("Failed to read notes tree referenced by %s (%s)",
+		    notes_ref, object_sha1);
 
 	hashclr(root_tree.key_sha1);
 	hashcpy(root_tree.val_sha1, sha1);
-	load_subtree(&root_tree, &root_node, 0);
+	load_subtree(t, &root_tree, t->root, 0);
 }
 
-static unsigned char *lookup_notes(const unsigned char *commit_sha1)
+struct load_notes_cb_data {
+	int counter;
+	struct notes_tree **trees;
+};
+
+static int load_one_display_note_ref(struct string_list_item *item,
+				     void *cb_data)
 {
-	struct leaf_node *found = note_tree_find(&root_node, 0, commit_sha1);
-	if (found)
-		return found->val_sha1;
-	return NULL;
+	struct load_notes_cb_data *c = cb_data;
+	struct notes_tree *t = xcalloc(1, sizeof(struct notes_tree));
+	init_notes(t, item->string, combine_notes_ignore, 0);
+	c->trees[c->counter++] = t;
+	return 0;
 }
 
-void free_notes(void)
+struct notes_tree **load_notes_trees(struct string_list *refs)
 {
-	note_tree_free(&root_node);
-	memset(&root_node, 0, sizeof(struct int_node));
-	initialized = 0;
+	struct notes_tree **trees;
+	struct load_notes_cb_data cb_data;
+	trees = xmalloc((refs->nr+1) * sizeof(struct notes_tree *));
+	cb_data.counter = 0;
+	cb_data.trees = trees;
+	for_each_string_list(load_one_display_note_ref, refs, &cb_data);
+	trees[cb_data.counter] = NULL;
+	return trees;
+}
+
+void init_display_notes(struct display_notes_opt *opt)
+{
+	char *display_ref_env;
+	int load_config_refs = 0;
+	display_notes_refs.strdup_strings = 1;
+
+	assert(!display_notes_trees);
+
+	if (!opt || !opt->suppress_default_notes) {
+		string_list_append(default_notes_ref(), &display_notes_refs);
+		display_ref_env = getenv(GIT_NOTES_DISPLAY_REF_ENVIRONMENT);
+		if (display_ref_env) {
+			string_list_add_refs_from_colon_sep(&display_notes_refs,
+							    display_ref_env);
+			load_config_refs = 0;
+		} else
+			load_config_refs = 1;
+	}
+
+	git_config(notes_display_config, &load_config_refs);
+
+	if (opt && opt->extra_notes_refs)
+		for_each_string_list(string_list_add_refs_from_list,
+				     opt->extra_notes_refs,
+				     &display_notes_refs);
+
+	display_notes_trees = load_notes_trees(&display_notes_refs);
+	string_list_clear(&display_notes_refs, 0);
+}
+
+void add_note(struct notes_tree *t, const unsigned char *object_sha1,
+		const unsigned char *note_sha1, combine_notes_fn combine_notes)
+{
+	struct leaf_node *l;
+
+	if (!t)
+		t = &default_notes_tree;
+	assert(t->initialized);
+	t->dirty = 1;
+	if (!combine_notes)
+		combine_notes = t->combine_notes;
+	l = (struct leaf_node *) xmalloc(sizeof(struct leaf_node));
+	hashcpy(l->key_sha1, object_sha1);
+	hashcpy(l->val_sha1, note_sha1);
+	note_tree_insert(t, t->root, 0, l, PTR_TYPE_NOTE, combine_notes);
+}
+
+void remove_note(struct notes_tree *t, const unsigned char *object_sha1)
+{
+	struct leaf_node l;
+
+	if (!t)
+		t = &default_notes_tree;
+	assert(t->initialized);
+	t->dirty = 1;
+	hashcpy(l.key_sha1, object_sha1);
+	hashclr(l.val_sha1);
+	note_tree_remove(t, t->root, 0, &l);
 }
 
-void get_commit_notes(const struct commit *commit, struct strbuf *sb,
-		const char *output_encoding, int flags)
+const unsigned char *get_note(struct notes_tree *t,
+		const unsigned char *object_sha1)
+{
+	struct leaf_node *found;
+
+	if (!t)
+		t = &default_notes_tree;
+	assert(t->initialized);
+	found = note_tree_find(t, t->root, 0, object_sha1);
+	return found ? found->val_sha1 : NULL;
+}
+
+int for_each_note(struct notes_tree *t, int flags, each_note_fn fn,
+		void *cb_data)
+{
+	if (!t)
+		t = &default_notes_tree;
+	assert(t->initialized);
+	return for_each_note_helper(t, t->root, 0, 0, flags, fn, cb_data);
+}
+
+int write_notes_tree(struct notes_tree *t, unsigned char *result)
+{
+	struct tree_write_stack root;
+	struct write_each_note_data cb_data;
+	int ret;
+
+	if (!t)
+		t = &default_notes_tree;
+	assert(t->initialized);
+
+	/* Prepare for traversal of current notes tree */
+	root.next = NULL; /* last forward entry in list is grounded */
+	strbuf_init(&root.buf, 256 * (32 + 40)); /* assume 256 entries */
+	root.path[0] = root.path[1] = '\0';
+	cb_data.root = &root;
+	cb_data.next_non_note = t->first_non_note;
+
+	/* Write tree objects representing current notes tree */
+	ret = for_each_note(t, FOR_EACH_NOTE_DONT_UNPACK_SUBTREES |
+				FOR_EACH_NOTE_YIELD_SUBTREES,
+			write_each_note, &cb_data) ||
+		write_each_non_note_until(NULL, &cb_data) ||
+		tree_write_stack_finish_subtree(&root) ||
+		write_sha1_file(root.buf.buf, root.buf.len, tree_type, result);
+	strbuf_release(&root.buf);
+	return ret;
+}
+
+void prune_notes(struct notes_tree *t)
+{
+	struct note_delete_list *l = NULL;
+
+	if (!t)
+		t = &default_notes_tree;
+	assert(t->initialized);
+
+	for_each_note(t, 0, prune_notes_helper, &l);
+
+	while (l) {
+		remove_note(t, l->sha1);
+		l = l->next;
+	}
+}
+
+void free_notes(struct notes_tree *t)
+{
+	if (!t)
+		t = &default_notes_tree;
+	if (t->root)
+		note_tree_free(t->root);
+	free(t->root);
+	while (t->first_non_note) {
+		t->prev_non_note = t->first_non_note->next;
+		free(t->first_non_note->path);
+		free(t->first_non_note);
+		t->first_non_note = t->prev_non_note;
+	}
+	free(t->ref);
+	memset(t, 0, sizeof(struct notes_tree));
+}
+
+void format_note(struct notes_tree *t, const unsigned char *object_sha1,
+		struct strbuf *sb, const char *output_encoding, int flags)
 {
 	static const char utf8[] = "utf-8";
-	unsigned char *sha1;
+	const unsigned char *sha1;
 	char *msg, *msg_p;
 	unsigned long linelen, msglen;
 	enum object_type type;
 
-	if (!initialized) {
-		const char *env = getenv(GIT_NOTES_REF_ENVIRONMENT);
-		if (env)
-			notes_ref_name = getenv(GIT_NOTES_REF_ENVIRONMENT);
-		else if (!notes_ref_name)
-			notes_ref_name = GIT_NOTES_DEFAULT_REF;
-		initialize_notes(notes_ref_name);
-		initialized = 1;
-	}
+	if (!t)
+		t = &default_notes_tree;
+	if (!t->initialized)
+		init_notes(t, NULL, NULL, 0);
 
-	sha1 = lookup_notes(commit->object.sha1);
+	sha1 = get_note(t, object_sha1);
 	if (!sha1)
 		return;
 
@@ -415,8 +1154,18 @@ void get_commit_notes(const struct commit *commit, struct strbuf *sb,
 	if (msglen && msg[msglen - 1] == '\n')
 		msglen--;
 
-	if (flags & NOTES_SHOW_HEADER)
-		strbuf_addstr(sb, "\nNotes:\n");
+	if (flags & NOTES_SHOW_HEADER) {
+		const char *ref = t->ref;
+		if (!ref || !strcmp(ref, GIT_NOTES_DEFAULT_REF)) {
+			strbuf_addstr(sb, "\nNotes:\n");
+		} else {
+			if (!prefixcmp(ref, "refs/"))
+				ref += 5;
+			if (!prefixcmp(ref, "notes/"))
+				ref += 6;
+			strbuf_addf(sb, "\nNotes (%s):\n", ref);
+		}
+	}
 
 	for (msg_p = msg; msg_p < msg + msglen; msg_p += linelen + 1) {
 		linelen = strchrnul(msg_p, '\n') - msg_p;
@@ -429,3 +1178,31 @@ void get_commit_notes(const struct commit *commit, struct strbuf *sb,
 
 	free(msg);
 }
+
+void format_display_notes(const unsigned char *object_sha1,
+			  struct strbuf *sb, const char *output_encoding, int flags)
+{
+	int i;
+	assert(display_notes_trees);
+	for (i = 0; display_notes_trees[i]; i++)
+		format_note(display_notes_trees[i], object_sha1, sb,
+			    output_encoding, flags);
+}
+
+int copy_note(struct notes_tree *t,
+	      const unsigned char *from_obj, const unsigned char *to_obj,
+	      int force, combine_notes_fn combine_fn)
+{
+	const unsigned char *note = get_note(t, from_obj);
+	const unsigned char *existing_note = get_note(t, to_obj);
+
+	if (!force && existing_note)
+		return 1;
+
+	if (note)
+		add_note(t, to_obj, note, combine_fn);
+	else if (existing_note)
+		add_note(t, to_obj, null_sha1, combine_fn);
+
+	return 0;
+}
diff --git a/notes.h b/notes.h
index a1421e351a..9f59277c51 100644
--- a/notes.h
+++ b/notes.h
@@ -1,13 +1,266 @@
 #ifndef NOTES_H
 #define NOTES_H
 
-/* Free (and de-initialize) the internal notes tree structure */
-void free_notes(void);
+/*
+ * Function type for combining two notes annotating the same object.
+ *
+ * When adding a new note annotating the same object as an existing note, it is
+ * up to the caller to decide how to combine the two notes. The decision is
+ * made by passing in a function of the following form. The function accepts
+ * two SHA1s -- of the existing note and the new note, respectively. The
+ * function then combines the notes in whatever way it sees fit, and writes the
+ * resulting SHA1 into the first SHA1 argument (cur_sha1). A non-zero return
+ * value indicates failure.
+ *
+ * The two given SHA1s must both be non-NULL and different from each other.
+ *
+ * The default combine_notes function (you get this when passing NULL) is
+ * combine_notes_concatenate(), which appends the contents of the new note to
+ * the contents of the existing note.
+ */
+typedef int combine_notes_fn(unsigned char *cur_sha1, const unsigned char *new_sha1);
 
+/* Common notes combinators */
+int combine_notes_concatenate(unsigned char *cur_sha1, const unsigned char *new_sha1);
+int combine_notes_overwrite(unsigned char *cur_sha1, const unsigned char *new_sha1);
+int combine_notes_ignore(unsigned char *cur_sha1, const unsigned char *new_sha1);
+
+/*
+ * Notes tree object
+ *
+ * Encapsulates the internal notes tree structure associated with a notes ref.
+ * Whenever a struct notes_tree pointer is required below, you may pass NULL in
+ * order to use the default/internal notes tree. E.g. you only need to pass a
+ * non-NULL value if you need to refer to several different notes trees
+ * simultaneously.
+ */
+extern struct notes_tree {
+	struct int_node *root;
+	struct non_note *first_non_note, *prev_non_note;
+	char *ref;
+	combine_notes_fn *combine_notes;
+	int initialized;
+	int dirty;
+} default_notes_tree;
+
+/*
+ * Flags controlling behaviour of notes tree initialization
+ *
+ * Default behaviour is to initialize the notes tree from the tree object
+ * specified by the given (or default) notes ref.
+ */
+#define NOTES_INIT_EMPTY 1
+
+/*
+ * Initialize the given notes_tree with the notes tree structure at the given
+ * ref. If given ref is NULL, the value of the $GIT_NOTES_REF environment
+ * variable is used, and if that is missing, the default notes ref is used
+ * ("refs/notes/commits").
+ *
+ * If you need to re-intialize a notes_tree structure (e.g. when switching from
+ * one notes ref to another), you must first de-initialize the notes_tree
+ * structure by calling free_notes(struct notes_tree *).
+ *
+ * If you pass t == NULL, the default internal notes_tree will be initialized.
+ *
+ * The combine_notes function that is passed becomes the default combine_notes
+ * function for the given notes_tree. If NULL is passed, the default
+ * combine_notes function is combine_notes_concatenate().
+ *
+ * Precondition: The notes_tree structure is zeroed (this can be achieved with
+ * memset(t, 0, sizeof(struct notes_tree)))
+ */
+void init_notes(struct notes_tree *t, const char *notes_ref,
+		combine_notes_fn combine_notes, int flags);
+
+/*
+ * Add the given note object to the given notes_tree structure
+ *
+ * IMPORTANT: The changes made by add_note() to the given notes_tree structure
+ * are not persistent until a subsequent call to write_notes_tree() returns
+ * zero.
+ */
+void add_note(struct notes_tree *t, const unsigned char *object_sha1,
+		const unsigned char *note_sha1, combine_notes_fn combine_notes);
+
+/*
+ * Remove the given note object from the given notes_tree structure
+ *
+ * IMPORTANT: The changes made by remove_note() to the given notes_tree
+ * structure are not persistent until a subsequent call to write_notes_tree()
+ * returns zero.
+ */
+void remove_note(struct notes_tree *t, const unsigned char *object_sha1);
+
+/*
+ * Get the note object SHA1 containing the note data for the given object
+ *
+ * Return NULL if the given object has no notes.
+ */
+const unsigned char *get_note(struct notes_tree *t,
+		const unsigned char *object_sha1);
+
+/*
+ * Copy a note from one object to another in the given notes_tree.
+ *
+ * Fails if the to_obj already has a note unless 'force' is true.
+ */
+int copy_note(struct notes_tree *t,
+	      const unsigned char *from_obj, const unsigned char *to_obj,
+	      int force, combine_notes_fn combine_fn);
+
+/*
+ * Flags controlling behaviour of for_each_note()
+ *
+ * Default behaviour of for_each_note() is to traverse every single note object
+ * in the given notes tree, unpacking subtree entries along the way.
+ * The following flags can be used to alter the default behaviour:
+ *
+ * - DONT_UNPACK_SUBTREES causes for_each_note() NOT to unpack and recurse into
+ *   subtree entries while traversing the notes tree. This causes notes within
+ *   those subtrees NOT to be passed to the callback. Use this flag if you
+ *   don't want to traverse _all_ notes, but only want to traverse the parts
+ *   of the notes tree that have already been unpacked (this includes at least
+ *   all notes that have been added/changed).
+ *
+ * - YIELD_SUBTREES causes any subtree entries that are encountered to be
+ *   passed to the callback, before recursing into them. Subtree entries are
+ *   not note objects, but represent intermediate directories in the notes
+ *   tree. When passed to the callback, subtree entries will have a trailing
+ *   slash in their path, which the callback may use to differentiate between
+ *   note entries and subtree entries. Note that already-unpacked subtree
+ *   entries are not part of the notes tree, and will therefore not be yielded.
+ *   If this flag is used together with DONT_UNPACK_SUBTREES, for_each_note()
+ *   will yield the subtree entry, but not recurse into it.
+ */
+#define FOR_EACH_NOTE_DONT_UNPACK_SUBTREES 1
+#define FOR_EACH_NOTE_YIELD_SUBTREES 2
+
+/*
+ * Invoke the specified callback function for each note in the given notes_tree
+ *
+ * If the callback returns nonzero, the note walk is aborted, and the return
+ * value from the callback is returned from for_each_note(). Hence, a zero
+ * return value from for_each_note() indicates that all notes were walked
+ * successfully.
+ *
+ * IMPORTANT: The callback function is NOT allowed to change the notes tree.
+ * In other words, the following functions can NOT be invoked (on the current
+ * notes tree) from within the callback:
+ * - add_note()
+ * - remove_note()
+ * - free_notes()
+ */
+typedef int each_note_fn(const unsigned char *object_sha1,
+		const unsigned char *note_sha1, char *note_path,
+		void *cb_data);
+int for_each_note(struct notes_tree *t, int flags, each_note_fn fn,
+		void *cb_data);
+
+/*
+ * Write the given notes_tree structure to the object database
+ *
+ * Creates a new tree object encapsulating the current state of the given
+ * notes_tree, and stores its SHA1 into the 'result' argument.
+ *
+ * Returns zero on success, non-zero on failure.
+ *
+ * IMPORTANT: Changes made to the given notes_tree are not persistent until
+ * this function has returned zero. Please also remember to create a
+ * corresponding commit object, and update the appropriate notes ref.
+ */
+int write_notes_tree(struct notes_tree *t, unsigned char *result);
+
+/*
+ * Remove all notes annotating non-existing objects from the given notes tree
+ *
+ * All notes in the given notes_tree that are associated with objects that no
+ * longer exist in the database, are removed from the notes tree.
+ *
+ * IMPORTANT: The changes made by prune_notes() to the given notes_tree
+ * structure are not persistent until a subsequent call to write_notes_tree()
+ * returns zero.
+ */
+void prune_notes(struct notes_tree *t);
+
+/*
+ * Free (and de-initialize) the given notes_tree structure
+ *
+ * IMPORTANT: Changes made to the given notes_tree since the last, successful
+ * call to write_notes_tree() will be lost.
+ */
+void free_notes(struct notes_tree *t);
+
+/* Flags controlling how notes are formatted */
 #define NOTES_SHOW_HEADER 1
 #define NOTES_INDENT 2
 
-void get_commit_notes(const struct commit *commit, struct strbuf *sb,
-		const char *output_encoding, int flags);
+/*
+ * Fill the given strbuf with the notes associated with the given object.
+ *
+ * If the given notes_tree structure is not initialized, it will be auto-
+ * initialized to the default value (see documentation for init_notes() above).
+ * If the given notes_tree is NULL, the internal/default notes_tree will be
+ * used instead.
+ *
+ * 'flags' is a bitwise combination of the above formatting flags.
+ */
+void format_note(struct notes_tree *t, const unsigned char *object_sha1,
+		struct strbuf *sb, const char *output_encoding, int flags);
+
+
+struct string_list;
+
+struct display_notes_opt {
+	unsigned int suppress_default_notes:1;
+	struct string_list *extra_notes_refs;
+};
+
+/*
+ * Load the notes machinery for displaying several notes trees.
+ *
+ * If 'opt' is not NULL, then it specifies additional settings for the
+ * displaying:
+ *
+ * - suppress_default_notes indicates that the notes from
+ *   core.notesRef and notes.displayRef should not be loaded.
+ *
+ * - extra_notes_refs may contain a list of globs (in the same style
+ *   as notes.displayRef) where notes should be loaded from.
+ */
+void init_display_notes(struct display_notes_opt *opt);
+
+/*
+ * Append notes for the given 'object_sha1' from all trees set up by
+ * init_display_notes() to 'sb'.  The 'flags' are a bitwise
+ * combination of
+ *
+ * - NOTES_SHOW_HEADER: add a 'Notes (refname):' header
+ *
+ * - NOTES_INDENT: indent the notes by 4 places
+ *
+ * You *must* call init_display_notes() before using this function.
+ */
+void format_display_notes(const unsigned char *object_sha1,
+			  struct strbuf *sb, const char *output_encoding, int flags);
+
+/*
+ * Load the notes tree from each ref listed in 'refs'.  The output is
+ * an array of notes_tree*, terminated by a NULL.
+ */
+struct notes_tree **load_notes_trees(struct string_list *refs);
+
+/*
+ * Add all refs that match 'glob' to the 'list'.
+ */
+void string_list_add_refs_by_glob(struct string_list *list, const char *glob);
+
+/*
+ * Add all refs from a colon-separated glob list 'globs' to the end of
+ * 'list'.  Empty components are ignored.  This helper is used to
+ * parse GIT_NOTES_DISPLAY_REF style environment variables.
+ */
+void string_list_add_refs_from_colon_sep(struct string_list *list,
+					 const char *globs);
 
 #endif
diff --git a/object.c b/object.c
index 3ca92c4c4d..277b3ddba7 100644
--- a/object.c
+++ b/object.c
@@ -252,10 +252,10 @@ void add_object_array_with_mode(struct object *obj, const char *name, struct obj
 
 void object_array_remove_duplicates(struct object_array *array)
 {
-	int ref, src, dst;
+	unsigned int ref, src, dst;
 	struct object_array_entry *objects = array->objects;
 
-	for (ref = 0; ref < array->nr - 1; ref++) {
+	for (ref = 0; ref + 1 < array->nr; ref++) {
 		for (src = ref + 1, dst = src;
 		     src < array->nr;
 		     src++) {
diff --git a/pack-check.c b/pack-check.c
index 166ca703c1..395fb9527a 100644
--- a/pack-check.c
+++ b/pack-check.c
@@ -133,14 +133,13 @@ static int verify_packfile(struct packed_git *p,
 	return err;
 }
 
-int verify_pack(struct packed_git *p)
+int verify_pack_index(struct packed_git *p)
 {
 	off_t index_size;
 	const unsigned char *index_base;
 	git_SHA_CTX ctx;
 	unsigned char sha1[20];
 	int err = 0;
-	struct pack_window *w_curs = NULL;
 
 	if (open_pack_index(p))
 		return error("packfile %s index not opened", p->pack_name);
@@ -154,8 +153,18 @@ int verify_pack(struct packed_git *p)
 	if (hashcmp(sha1, index_base + index_size - 20))
 		err = error("Packfile index for %s SHA1 mismatch",
 			    p->pack_name);
+	return err;
+}
+
+int verify_pack(struct packed_git *p)
+{
+	int err = 0;
+	struct pack_window *w_curs = NULL;
+
+	err |= verify_pack_index(p);
+	if (!p->index_data)
+		return -1;
 
-	/* Verify pack file */
 	err |= verify_packfile(p, &w_curs);
 	unuse_pack(&w_curs);
 
diff --git a/pack-write.c b/pack-write.c
index 9f47cf9961..a905ca4486 100644
--- a/pack-write.c
+++ b/pack-write.c
@@ -253,3 +253,30 @@ char *index_pack_lockfile(int ip_out)
 	}
 	return NULL;
 }
+
+/*
+ * The per-object header is a pretty dense thing, which is
+ *  - first byte: low four bits are "size", then three bits of "type",
+ *    and the high bit is "size continues".
+ *  - each byte afterwards: low seven bits are size continuation,
+ *    with the high bit being "size continues"
+ */
+int encode_in_pack_object_header(enum object_type type, uintmax_t size, unsigned char *hdr)
+{
+	int n = 1;
+	unsigned char c;
+
+	if (type < OBJ_COMMIT || type > OBJ_REF_DELTA)
+		die("bad type %d", type);
+
+	c = (type << 4) | (size & 15);
+	size >>= 4;
+	while (size) {
+		*hdr++ = c | 0x80;
+		c = size & 0x7f;
+		size >>= 7;
+		n++;
+	}
+	*hdr = c;
+	return n;
+}
diff --git a/pack.h b/pack.h
index b759a23d4d..bb275762b7 100644
--- a/pack.h
+++ b/pack.h
@@ -57,9 +57,11 @@ struct pack_idx_entry {
 
 extern const char *write_idx_file(const char *index_name, struct pack_idx_entry **objects, int nr_objects, unsigned char *sha1);
 extern int check_pack_crc(struct packed_git *p, struct pack_window **w_curs, off_t offset, off_t len, unsigned int nr);
+extern int verify_pack_index(struct packed_git *);
 extern int verify_pack(struct packed_git *);
 extern void fixup_pack_header_footer(int, unsigned char *, const char *, uint32_t, unsigned char *, off_t);
 extern char *index_pack_lockfile(int fd);
+extern int encode_in_pack_object_header(enum object_type, uintmax_t, unsigned char *);
 
 #define PH_ERROR_EOF		(-1)
 #define PH_ERROR_PACK_SIGNATURE	(-2)
diff --git a/parse-options.c b/parse-options.c
index d218122af5..8546d8526f 100644
--- a/parse-options.c
+++ b/parse-options.c
@@ -2,6 +2,7 @@
 #include "parse-options.h"
 #include "cache.h"
 #include "commit.h"
+#include "color.h"
 
 static int parse_options_usage(const char * const *usagestr,
 			       const struct option *opts);
@@ -599,6 +600,21 @@ int parse_opt_approxidate_cb(const struct option *opt, const char *arg,
 	return 0;
 }
 
+int parse_opt_color_flag_cb(const struct option *opt, const char *arg,
+			    int unset)
+{
+	int value;
+
+	if (!arg)
+		arg = unset ? "never" : (const char *)opt->defval;
+	value = git_config_colorbool(NULL, arg, -1);
+	if (value < 0)
+		return opterror(opt,
+			"expects \"always\", \"auto\", or \"never\"", 0);
+	*(int *)opt->value = value;
+	return 0;
+}
+
 int parse_opt_verbosity_cb(const struct option *opt, const char *arg,
 			   int unset)
 {
@@ -643,3 +659,18 @@ int parse_opt_tertiary(const struct option *opt, const char *arg, int unset)
 	*target = unset ? 2 : 1;
 	return 0;
 }
+
+int parse_options_concat(struct option *dst, size_t dst_size, struct option *src)
+{
+	int i, j;
+
+	for (i = 0; i < dst_size; i++)
+		if (dst[i].type == OPTION_END)
+			break;
+	for (j = 0; i < dst_size; i++, j++) {
+		dst[i] = src[j];
+		if (src[j].type == OPTION_END)
+			return 0;
+	}
+	return -1;
+}
diff --git a/parse-options.h b/parse-options.h
index 0c996916b6..7581e931da 100644
--- a/parse-options.h
+++ b/parse-options.h
@@ -135,6 +135,10 @@ struct option {
 	  PARSE_OPT_NOARG | PARSE_OPT_NONEG, (f) }
 #define OPT_FILENAME(s, l, v, h)    { OPTION_FILENAME, (s), (l), (v), \
 				       "FILE", (h) }
+#define OPT_COLOR_FLAG(s, l, v, h) \
+	{ OPTION_CALLBACK, (s), (l), (v), "when", (h), PARSE_OPT_OPTARG, \
+		parse_opt_color_flag_cb, (intptr_t)"always" }
+
 
 /* parse_options() will filter out the processed options and leave the
  * non-option arguments in argv[].
@@ -183,10 +187,12 @@ extern int parse_options_step(struct parse_opt_ctx_t *ctx,
 
 extern int parse_options_end(struct parse_opt_ctx_t *ctx);
 
+extern int parse_options_concat(struct option *dst, size_t, struct option *src);
 
 /*----- some often used options -----*/
 extern int parse_opt_abbrev_cb(const struct option *, const char *, int);
 extern int parse_opt_approxidate_cb(const struct option *, const char *, int);
+extern int parse_opt_color_flag_cb(const struct option *, const char *, int);
 extern int parse_opt_verbosity_cb(const struct option *, const char *, int);
 extern int parse_opt_with_commit(const struct option *, const char *, int);
 extern int parse_opt_tertiary(const struct option *, const char *, int);
@@ -203,5 +209,7 @@ extern int parse_opt_tertiary(const struct option *, const char *, int);
 	{ OPTION_CALLBACK, 0, "abbrev", (var), "n", \
 	  "use <n> digits to display SHA-1s", \
 	  PARSE_OPT_OPTARG, &parse_opt_abbrev_cb, 0 }
+#define OPT__COLOR(var, h) \
+	OPT_COLOR_FLAG(0, "color", (var), (h))
 
 #endif
diff --git a/path.c b/path.c
index aaa9345ebc..b4c8d91722 100644
--- a/path.c
+++ b/path.c
@@ -415,7 +415,7 @@ char *enter_repo(char *path, int strict)
 
 	if (access("objects", X_OK) == 0 && access("refs", X_OK) == 0 &&
 	    validate_headref("HEAD") == 0) {
-		setenv(GIT_DIR_ENVIRONMENT, ".", 1);
+		set_git_dir(".");
 		check_repository_format();
 		return path;
 	}
@@ -728,3 +728,10 @@ int daemon_avoid_alias(const char *p)
 		}
 	}
 }
+
+int offset_1st_component(const char *path)
+{
+	if (has_dos_drive_prefix(path))
+		return 2 + is_dir_sep(path[2]);
+	return is_dir_sep(path[0]);
+}
diff --git a/perl/Git.pm b/perl/Git.pm
index 970fe434ed..1926dc9a4b 100644
--- a/perl/Git.pm
+++ b/perl/Git.pm
@@ -842,7 +842,7 @@ sub _open_hash_and_insert_object_if_needed {
 
 	($self->{hash_object_pid}, $self->{hash_object_in},
 	 $self->{hash_object_out}, $self->{hash_object_ctx}) =
-		command_bidi_pipe(qw(hash-object -w --stdin-paths));
+		command_bidi_pipe(qw(hash-object -w --stdin-paths --no-filters));
 }
 
 sub _close_hash_and_insert_object {
diff --git a/pretty.c b/pretty.c
index 6b3550b1f1..2777d30224 100644
--- a/pretty.c
+++ b/pretty.c
@@ -776,9 +776,13 @@ static size_t format_commit_one(struct strbuf *sb, const char *placeholder,
 		}
 		return 0;	/* unknown %g placeholder */
 	case 'N':
-		get_commit_notes(commit, sb, git_log_output_encoding ?
-			     git_log_output_encoding : git_commit_encoding, 0);
-		return 1;
+		if (c->pretty_ctx->show_notes) {
+			format_display_notes(commit->object.sha1, sb,
+				    git_log_output_encoding ? git_log_output_encoding
+							    : git_commit_encoding, 0);
+			return 1;
+		}
+		return 0;
 	}
 
 	/* For the rest we have to parse the commit header. */
@@ -855,6 +859,35 @@ static size_t format_commit_item(struct strbuf *sb, const char *placeholder,
 	return consumed + 1;
 }
 
+static size_t userformat_want_item(struct strbuf *sb, const char *placeholder,
+				   void *context)
+{
+	struct userformat_want *w = context;
+
+	if (*placeholder == '+' || *placeholder == '-')
+		placeholder++;
+
+	switch (*placeholder) {
+	case 'N':
+		w->notes = 1;
+		break;
+	}
+	return 0;
+}
+
+void userformat_find_requirements(const char *fmt, struct userformat_want *w)
+{
+	struct strbuf dummy = STRBUF_INIT;
+
+	if (!fmt) {
+		if (!user_format)
+			return;
+		fmt = user_format;
+	}
+	strbuf_expand(&dummy, user_format, userformat_want_item, w);
+	strbuf_release(&dummy);
+}
+
 void format_commit_message(const struct commit *commit,
 			   const char *format, struct strbuf *sb,
 			   const struct pretty_print_context *pretty_ctx)
@@ -1096,8 +1129,8 @@ void pretty_print_commit(enum cmit_fmt fmt, const struct commit *commit,
 		strbuf_addch(sb, '\n');
 
 	if (context->show_notes)
-		get_commit_notes(commit, sb, encoding,
-				 NOTES_SHOW_HEADER | NOTES_INDENT);
+		format_display_notes(commit->object.sha1, sb, encoding,
+				     NOTES_SHOW_HEADER | NOTES_INDENT);
 
 	free(reencoded);
 }
diff --git a/quote.c b/quote.c
index fc93435727..63d3b01818 100644
--- a/quote.c
+++ b/quote.c
@@ -295,42 +295,75 @@ void write_name_quotedpfx(const char *pfx, size_t pfxlen,
 	fputc(terminator, fp);
 }
 
-/* quote path as relative to the given prefix */
-char *quote_path_relative(const char *in, int len,
-			  struct strbuf *out, const char *prefix)
+static const char *path_relative(const char *in, int len,
+				 struct strbuf *sb, const char *prefix,
+				 int prefix_len);
+
+void write_name_quoted_relative(const char *name, size_t len,
+				const char *prefix, size_t prefix_len,
+				FILE *fp, int terminator)
 {
-	int needquote;
+	struct strbuf sb = STRBUF_INIT;
+
+	name = path_relative(name, len, &sb, prefix, prefix_len);
+	write_name_quoted(name, fp, terminator);
+
+	strbuf_release(&sb);
+}
+
+/*
+ * Give path as relative to prefix.
+ *
+ * The strbuf may or may not be used, so do not assume it contains the
+ * returned path.
+ */
+static const char *path_relative(const char *in, int len,
+				 struct strbuf *sb, const char *prefix,
+				 int prefix_len)
+{
+	int off, i;
 
 	if (len < 0)
 		len = strlen(in);
+	if (prefix && prefix_len < 0)
+		prefix_len = strlen(prefix);
+
+	off = 0;
+	i = 0;
+	while (i < prefix_len && i < len && prefix[i] == in[i]) {
+		if (prefix[i] == '/')
+			off = i + 1;
+		i++;
+	}
+	in += off;
+	len -= off;
+
+	if (i >= prefix_len)
+		return in;
 
-	/* "../" prefix itself does not need quoting, but "in" might. */
-	needquote = next_quote_pos(in, len) < len;
-	strbuf_setlen(out, 0);
-	strbuf_grow(out, len);
-
-	if (needquote)
-		strbuf_addch(out, '"');
-	if (prefix) {
-		int off = 0;
-		while (prefix[off] && off < len && prefix[off] == in[off])
-			if (prefix[off] == '/') {
-				prefix += off + 1;
-				in += off + 1;
-				len -= off + 1;
-				off = 0;
-			} else
-				off++;
-
-		for (; *prefix; prefix++)
-			if (*prefix == '/')
-				strbuf_addstr(out, "../");
+	strbuf_reset(sb);
+	strbuf_grow(sb, len);
+
+	while (i < prefix_len) {
+		if (prefix[i] == '/')
+			strbuf_addstr(sb, "../");
+		i++;
 	}
+	strbuf_add(sb, in, len);
+
+	return sb->buf;
+}
 
-	quote_c_style_counted (in, len, out, NULL, 1);
+/* quote path as relative to the given prefix */
+char *quote_path_relative(const char *in, int len,
+			  struct strbuf *out, const char *prefix)
+{
+	struct strbuf sb = STRBUF_INIT;
+	const char *rel = path_relative(in, len, &sb, prefix, -1);
+	strbuf_reset(out);
+	quote_c_style_counted(rel, strlen(rel), out, NULL, 0);
+	strbuf_release(&sb);
 
-	if (needquote)
-		strbuf_addch(out, '"');
 	if (!out->len)
 		strbuf_addstr(out, "./");
 
diff --git a/quote.h b/quote.h
index f83eb233c4..38003bff5f 100644
--- a/quote.h
+++ b/quote.h
@@ -54,9 +54,12 @@ extern void quote_two_c_style(struct strbuf *, const char *, const char *, int);
 extern void write_name_quoted(const char *name, FILE *, int terminator);
 extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
                                  const char *name, FILE *, int terminator);
+extern void write_name_quoted_relative(const char *name, size_t len,
+		const char *prefix, size_t prefix_len,
+		FILE *fp, int terminator);
 
 /* quote path as relative to the given prefix */
-char *quote_path_relative(const char *in, int len,
+extern char *quote_path_relative(const char *in, int len,
 			  struct strbuf *out, const char *prefix);
 
 /* quoting as a string literal for other languages */
diff --git a/refs.c b/refs.c
index a7518b6f0d..d3db15a76c 100644
--- a/refs.c
+++ b/refs.c
@@ -698,7 +698,6 @@ int for_each_glob_ref_in(each_ref_fn fn, const char *pattern,
 {
 	struct strbuf real_pattern = STRBUF_INIT;
 	struct ref_filter filter;
-	const char *has_glob_specials;
 	int ret;
 
 	if (!prefix && prefixcmp(pattern, "refs/"))
@@ -707,8 +706,7 @@ int for_each_glob_ref_in(each_ref_fn fn, const char *pattern,
 		strbuf_addstr(&real_pattern, prefix);
 	strbuf_addstr(&real_pattern, pattern);
 
-	has_glob_specials = strpbrk(pattern, "?*[");
-	if (!has_glob_specials) {
+	if (!has_glob_specials(pattern)) {
 		/* Append implied '/' '*' if not present. */
 		if (real_pattern.buf[real_pattern.len - 1] != '/')
 			strbuf_addch(&real_pattern, '/');
@@ -1278,6 +1276,7 @@ static int log_ref_write(const char *ref_name, const unsigned char *old_sha1,
 	if (log_all_ref_updates &&
 	    (!prefixcmp(ref_name, "refs/heads/") ||
 	     !prefixcmp(ref_name, "refs/remotes/") ||
+	     !prefixcmp(ref_name, "refs/notes/") ||
 	     !strcmp(ref_name, "HEAD"))) {
 		if (safe_create_leading_directories(log_file) < 0)
 			return error("unable to create directory for %s",
diff --git a/refs.h b/refs.h
index f7648b9bd3..4a18b083f5 100644
--- a/refs.h
+++ b/refs.h
@@ -28,6 +28,11 @@ extern int for_each_replace_ref(each_ref_fn, void *);
 extern int for_each_glob_ref(each_ref_fn, const char *pattern, void *);
 extern int for_each_glob_ref_in(each_ref_fn, const char *pattern, const char* prefix, void *);
 
+static inline const char *has_glob_specials(const char *pattern)
+{
+	return strpbrk(pattern, "?*[");
+}
+
 /* can be used to learn about broken ref and symref */
 extern int for_each_rawref(each_ref_fn, void *);
 
diff --git a/remote-curl.c b/remote-curl.c
index d388120851..24fbb9a9b9 100644
--- a/remote-curl.c
+++ b/remote-curl.c
@@ -9,8 +9,7 @@
 #include "sideband.h"
 
 static struct remote *remote;
-static const char *url;
-static struct walker *walker;
+static const char *url; /* always ends with a trailing slash */
 
 struct options {
 	int verbosity;
@@ -22,12 +21,6 @@ struct options {
 };
 static struct options options;
 
-static void init_walker(void)
-{
-	if (!walker)
-		walker = get_http_walker(url, remote);
-}
-
 static int set_option(const char *name, const char *value)
 {
 	if (!strcmp(name, "verbosity")) {
@@ -108,7 +101,7 @@ static struct discovery* discover_refs(const char *service)
 		return last;
 	free_discovery(last);
 
-	strbuf_addf(&buffer, "%s/info/refs", url);
+	strbuf_addf(&buffer, "%sinfo/refs", url);
 	if (!prefixcmp(url, "http://") || !prefixcmp(url, "https://")) {
 		is_http = 1;
 		if (!strchr(url, '?'))
@@ -119,7 +112,6 @@ static struct discovery* discover_refs(const char *service)
 	}
 	refs_url = strbuf_detach(&buffer, NULL);
 
-	init_walker();
 	http_ret = http_get_strbuf(refs_url, &buffer, HTTP_NO_CACHE);
 
 	/* try again with "plain" url (no ? or & appended) */
@@ -128,7 +120,7 @@ static struct discovery* discover_refs(const char *service)
 		strbuf_reset(&buffer);
 
 		proto_git_candidate = 0;
-		strbuf_addf(&buffer, "%s/info/refs", url);
+		strbuf_addf(&buffer, "%sinfo/refs", url);
 		refs_url = strbuf_detach(&buffer, NULL);
 
 		http_ret = http_get_strbuf(refs_url, &buffer, HTTP_NO_CACHE);
@@ -140,6 +132,8 @@ static struct discovery* discover_refs(const char *service)
 	case HTTP_MISSING_TARGET:
 		die("%s not found: did you run git update-server-info on the"
 		    " server?", refs_url);
+	case HTTP_NOAUTH:
+		die("Authentication failed");
 	default:
 		http_error(refs_url, http_ret);
 		die("HTTP request failed");
@@ -250,9 +244,8 @@ static struct ref *parse_info_refs(struct discovery *heads)
 		i++;
 	}
 
-	init_walker();
 	ref = alloc_ref("HEAD");
-	if (!walker->fetch_ref(walker, ref) &&
+	if (!http_fetch_ref(url, ref) &&
 	    !resolve_remote_symref(ref, refs)) {
 		ref->next = refs;
 		refs = ref;
@@ -502,7 +495,6 @@ static int rpc_service(struct rpc_state *rpc, struct discovery *heads)
 	struct child_process client;
 	int err = 0;
 
-	init_walker();
 	memset(&client, 0, sizeof(client));
 	client.in = -1;
 	client.out = -1;
@@ -519,7 +511,7 @@ static int rpc_service(struct rpc_state *rpc, struct discovery *heads)
 	rpc->out = client.out;
 	strbuf_init(&rpc->result, 0);
 
-	strbuf_addf(&buf, "%s/%s", url, svc);
+	strbuf_addf(&buf, "%s%s", url, svc);
 	rpc->service_url = strbuf_detach(&buf, NULL);
 
 	strbuf_addf(&buf, "Content-Type: application/x-%s-request", svc);
@@ -554,6 +546,7 @@ static int rpc_service(struct rpc_state *rpc, struct discovery *heads)
 
 static int fetch_dumb(int nr_heads, struct ref **to_fetch)
 {
+	struct walker *walker;
 	char **targets = xmalloc(nr_heads * sizeof(char*));
 	int ret, i;
 
@@ -562,13 +555,14 @@ static int fetch_dumb(int nr_heads, struct ref **to_fetch)
 	for (i = 0; i < nr_heads; i++)
 		targets[i] = xstrdup(sha1_to_hex(to_fetch[i]->old_sha1));
 
-	init_walker();
+	walker = get_http_walker(url);
 	walker->get_all = 1;
 	walker->get_tree = 1;
 	walker->get_history = 1;
 	walker->get_verbosely = options.verbosity >= 3;
 	walker->get_recover = 0;
 	ret = walker_fetch(walker, nr_heads, targets, NULL, NULL);
+	walker_free(walker);
 
 	for (i = 0; i < nr_heads; i++)
 		free(targets[i]);
@@ -806,11 +800,15 @@ int main(int argc, const char **argv)
 	remote = remote_get(argv[1]);
 
 	if (argc > 2) {
-		url = argv[2];
+		end_url_with_slash(&buf, argv[2]);
 	} else {
-		url = remote->url[0];
+		end_url_with_slash(&buf, remote->url[0]);
 	}
 
+	url = strbuf_detach(&buf, NULL);
+
+	http_init(remote);
+
 	do {
 		if (strbuf_getline(&buf, stdin, '\n') == EOF)
 			break;
@@ -856,5 +854,8 @@ int main(int argc, const char **argv)
 		}
 		strbuf_reset(&buf);
 	} while (1);
+
+	http_cleanup();
+
 	return 0;
 }
diff --git a/remote.c b/remote.c
index c70181cdc6..26ce56046d 100644
--- a/remote.c
+++ b/remote.c
@@ -476,7 +476,7 @@ static void read_config(void)
 	unsigned char sha1[20];
 	const char *head_ref;
 	int flag;
-	if (default_remote_name) // did this already
+	if (default_remote_name) /* did this already */
 		return;
 	default_remote_name = xstrdup("origin");
 	current_branch = NULL;
diff --git a/rerere.c b/rerere.c
index a59f74f76c..f221bed1e9 100644
--- a/rerere.c
+++ b/rerere.c
@@ -319,7 +319,7 @@ static int handle_cache(const char *path, unsigned char *sha1, const char *outpu
 		if (!mmfile[i].ptr && !mmfile[i].size)
 			mmfile[i].ptr = xstrdup("");
 	}
-	ll_merge(&result, path, &mmfile[0],
+	ll_merge(&result, path, &mmfile[0], NULL,
 		 &mmfile[1], "ours",
 		 &mmfile[2], "theirs", 0);
 	for (i = 0; i < 3; i++)
@@ -376,7 +376,7 @@ static int merge(const char *name, const char *path)
 		ret = 1;
 		goto out;
 	}
-	ret = ll_merge(&result, path, &base, &cur, "", &other, "", 0);
+	ret = ll_merge(&result, path, &base, NULL, &cur, "", &other, "", 0);
 	if (!ret) {
 		FILE *f = fopen(path, "w");
 		if (!f)
diff --git a/revision.c b/revision.c
index 490b484084..f4b8b38315 100644
--- a/revision.c
+++ b/revision.c
@@ -12,6 +12,7 @@
 #include "patch-ids.h"
 #include "decorate.h"
 #include "log-tree.h"
+#include "string-list.h"
 
 volatile show_early_output_fn_t show_early_output;
 
@@ -1191,9 +1192,29 @@ static int handle_revision_opt(struct rev_info *revs, int argc, const char **arg
 	} else if (!strcmp(arg, "--show-notes")) {
 		revs->show_notes = 1;
 		revs->show_notes_given = 1;
+	} else if (!prefixcmp(arg, "--show-notes=")) {
+		struct strbuf buf = STRBUF_INIT;
+		revs->show_notes = 1;
+		revs->show_notes_given = 1;
+		if (!revs->notes_opt.extra_notes_refs)
+			revs->notes_opt.extra_notes_refs = xcalloc(1, sizeof(struct string_list));
+		if (!prefixcmp(arg+13, "refs/"))
+			/* happy */;
+		else if (!prefixcmp(arg+13, "notes/"))
+			strbuf_addstr(&buf, "refs/");
+		else
+			strbuf_addstr(&buf, "refs/notes/");
+		strbuf_addstr(&buf, arg+13);
+		string_list_append(strbuf_detach(&buf, NULL),
+				   revs->notes_opt.extra_notes_refs);
 	} else if (!strcmp(arg, "--no-notes")) {
 		revs->show_notes = 0;
 		revs->show_notes_given = 1;
+	} else if (!strcmp(arg, "--standard-notes")) {
+		revs->show_notes_given = 1;
+		revs->notes_opt.suppress_default_notes = 0;
+	} else if (!strcmp(arg, "--no-standard-notes")) {
+		revs->notes_opt.suppress_default_notes = 1;
 	} else if (!strcmp(arg, "--oneline")) {
 		revs->verbose_header = 1;
 		get_commit_format("oneline", revs);
@@ -1332,7 +1353,7 @@ static void append_prune_data(const char ***prune_data, const char **av)
  * Returns the number of arguments left that weren't recognized
  * (which are also moved to the head of the argument list)
  */
-int setup_revisions(int argc, const char **argv, struct rev_info *revs, const char *def)
+int setup_revisions(int argc, const char **argv, struct rev_info *revs, struct setup_revision_opt *opt)
 {
 	int i, flags, left, seen_dashdash, read_from_stdin, got_rev_arg = 0;
 	const char **prune_data = NULL;
@@ -1468,7 +1489,9 @@ int setup_revisions(int argc, const char **argv, struct rev_info *revs, const ch
 		revs->prune_data = get_pathspec(revs->prefix, prune_data);
 
 	if (revs->def == NULL)
-		revs->def = def;
+		revs->def = opt ? opt->def : NULL;
+	if (opt && opt->tweak)
+		opt->tweak(revs, opt);
 	if (revs->show_merge)
 		prepare_show_merge(revs);
 	if (revs->def && !revs->pending.nr && !got_rev_arg) {
@@ -1502,11 +1525,8 @@ int setup_revisions(int argc, const char **argv, struct rev_info *revs, const ch
 		if (!revs->full_diff)
 			diff_tree_setup_paths(revs->prune_data, &revs->diffopt);
 	}
-	if (revs->combine_merges) {
+	if (revs->combine_merges)
 		revs->ignore_merges = 0;
-		if (revs->dense_combined_merges && !revs->diffopt.output_format)
-			revs->diffopt.output_format = DIFF_FORMAT_PATCH;
-	}
 	revs->diffopt.abbrev = revs->abbrev;
 	if (diff_setup_done(&revs->diffopt) < 0)
 		die("diff_setup_done failed");
diff --git a/revision.h b/revision.h
index a14deefc25..568f1c98de 100644
--- a/revision.h
+++ b/revision.h
@@ -3,6 +3,7 @@
 
 #include "parse-options.h"
 #include "grep.h"
+#include "notes.h"
 
 #define SEEN		(1u<<0)
 #define UNINTERESTING   (1u<<1)
@@ -20,6 +21,7 @@
 
 struct rev_info;
 struct log_info;
+struct string_list;
 
 struct rev_info {
 	/* Starting list */
@@ -126,6 +128,9 @@ struct rev_info {
 	struct reflog_walk_info *reflog_info;
 	struct decoration children;
 	struct decoration merge_simplification;
+
+	/* notes-specific options: which refs to show */
+	struct display_notes_opt notes_opt;
 };
 
 #define REV_TREE_SAME		0
@@ -137,8 +142,13 @@ struct rev_info {
 typedef void (*show_early_output_fn_t)(struct rev_info *, struct commit_list *);
 extern volatile show_early_output_fn_t show_early_output;
 
+struct setup_revision_opt {
+	const char *def;
+	void (*tweak)(struct rev_info *, struct setup_revision_opt *);
+};
+
 extern void init_revisions(struct rev_info *revs, const char *prefix);
-extern int setup_revisions(int argc, const char **argv, struct rev_info *revs, const char *def);
+extern int setup_revisions(int argc, const char **argv, struct rev_info *revs, struct setup_revision_opt *);
 extern void parse_revision_opt(struct rev_info *revs, struct parse_opt_ctx_t *ctx,
 				 const struct option *options,
 				 const char * const usagestr[]);
diff --git a/run-command.c b/run-command.c
index c8d53795ec..c7793f50fb 100644
--- a/run-command.c
+++ b/run-command.c
@@ -342,8 +342,6 @@ fail_pipe:
 	else if (cmd->out > 1)
 		fhout = dup(cmd->out);
 
-	if (cmd->dir)
-		die("chdir in start_command() not implemented");
 	if (cmd->env)
 		env = make_augmented_environ(cmd->env);
 
@@ -353,7 +351,7 @@ fail_pipe:
 		cmd->argv = prepare_shell_cmd(cmd->argv);
 	}
 
-	cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env,
+	cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env, cmd->dir,
 				  fhin, fhout, fherr);
 	failed_errno = errno;
 	if (cmd->pid < 0 && (!cmd->silent_exec_failure || errno != ENOENT))
@@ -385,6 +383,8 @@ fail_pipe:
 			close(cmd->out);
 		if (need_err)
 			close_pair(fderr);
+		else if (cmd->err)
+			close(cmd->err);
 		errno = failed_errno;
 		return -1;
 	}
diff --git a/send-pack.h b/send-pack.h
index 28141ac913..60b4ba66eb 100644
--- a/send-pack.h
+++ b/send-pack.h
@@ -4,6 +4,7 @@
 struct send_pack_args {
 	unsigned verbose:1,
 		quiet:1,
+		porcelain:1,
 		send_mirror:1,
 		force_update:1,
 		use_thin_pack:1,
diff --git a/setup.c b/setup.c
index fac34f77a7..0e4cfe603f 100644
--- a/setup.c
+++ b/setup.c
@@ -18,14 +18,15 @@ const char *prefix_path(const char *prefix, int len, const char *path)
 	if (normalize_path_copy(sanitized, sanitized))
 		goto error_out;
 	if (is_absolute_path(orig)) {
-		size_t len, total;
+		size_t root_len, len, total;
 		const char *work_tree = get_git_work_tree();
 		if (!work_tree)
 			goto error_out;
 		len = strlen(work_tree);
+		root_len = offset_1st_component(work_tree);
 		total = strlen(sanitized) + 1;
 		if (strncmp(sanitized, work_tree, len) ||
-		    (sanitized[len] != '\0' && sanitized[len] != '/')) {
+		    (len > root_len && sanitized[len] != '\0' && sanitized[len] != '/')) {
 		error_out:
 			die("'%s' is outside repository", orig);
 		}
@@ -321,7 +322,7 @@ const char *setup_git_directory_gently(int *nongit_ok)
 	static char cwd[PATH_MAX+1];
 	const char *gitdirenv;
 	const char *gitfile_dir;
-	int len, offset, ceil_offset;
+	int len, offset, ceil_offset, root_len;
 
 	/*
 	 * Let's assume that we are in a git repository.
@@ -403,10 +404,11 @@ const char *setup_git_directory_gently(int *nongit_ok)
 			if (!work_tree_env)
 				inside_work_tree = 0;
 			if (offset != len) {
-				cwd[offset] = '\0';
-				setenv(GIT_DIR_ENVIRONMENT, cwd, 1);
+				root_len = offset_1st_component(cwd);
+				cwd[offset > root_len ? offset : root_len] = '\0';
+				set_git_dir(cwd);
 			} else
-				setenv(GIT_DIR_ENVIRONMENT, ".", 1);
+				set_git_dir(".");
 			check_repository_format_gently(nongit_ok);
 			return NULL;
 		}
@@ -427,7 +429,8 @@ const char *setup_git_directory_gently(int *nongit_ok)
 	inside_git_dir = 0;
 	if (!work_tree_env)
 		inside_work_tree = 1;
-	git_work_tree_cfg = xstrndup(cwd, offset);
+	root_len = offset_1st_component(cwd);
+	git_work_tree_cfg = xstrndup(cwd, offset > root_len ? offset : root_len);
 	if (check_repository_format_gently(nongit_ok))
 		return NULL;
 	if (offset == len)
@@ -516,6 +519,12 @@ int check_repository_format(void)
 	return check_repository_format_gently(NULL);
 }
 
+/*
+ * Returns the "prefix", a path to the current working directory
+ * relative to the work tree root, or NULL, if the current working
+ * directory is not a strict subdirectory of the work tree root. The
+ * prefix always ends with a '/' character.
+ */
 const char *setup_git_directory(void)
 {
 	const char *retval = setup_git_directory_gently(NULL);
diff --git a/sha1_file.c b/sha1_file.c
index c23cc5e6e1..72de38909e 100644
--- a/sha1_file.c
+++ b/sha1_file.c
@@ -35,13 +35,6 @@ static size_t sz_fmt(size_t s) { return s; }
 
 const unsigned char null_sha1[20];
 
-static inline int offset_1st_component(const char *path)
-{
-	if (has_dos_drive_prefix(path))
-		return 2 + (path[2] == '/');
-	return *path == '/';
-}
-
 int safe_create_leading_directories(char *path)
 {
 	char *pos = path + offset_1st_component(path);
@@ -109,20 +102,22 @@ static void fill_sha1_path(char *pathbuf, const unsigned char *sha1)
  */
 char *sha1_file_name(const unsigned char *sha1)
 {
-	static char *name, *base;
+	static char buf[PATH_MAX];
+	const char *objdir;
+	int len;
 
-	if (!base) {
-		const char *sha1_file_directory = get_object_directory();
-		int len = strlen(sha1_file_directory);
-		base = xmalloc(len + 60);
-		memcpy(base, sha1_file_directory, len);
-		memset(base+len, 0, 60);
-		base[len] = '/';
-		base[len+3] = '/';
-		name = base + len + 1;
-	}
-	fill_sha1_path(name, sha1);
-	return base;
+	objdir = get_object_directory();
+	len = strlen(objdir);
+
+	/* '/' + sha1(2) + '/' + sha1(38) + '\0' */
+	if (len + 43 > PATH_MAX)
+		die("insanely long object directory %s", objdir);
+	memcpy(buf, objdir, len);
+	buf[len] = '/';
+	buf[len+3] = '/';
+	buf[len+42] = '\0';
+	fill_sha1_path(buf + len + 1, sha1);
+	return buf;
 }
 
 static char *sha1_get_pack_name(const unsigned char *sha1,
@@ -606,6 +601,14 @@ void unuse_pack(struct pack_window **w_cursor)
 	}
 }
 
+void close_pack_index(struct packed_git *p)
+{
+	if (p->index_data) {
+		munmap((void *)p->index_data, p->index_size);
+		p->index_data = NULL;
+	}
+}
+
 /*
  * This is used by git-repack in case a newly created pack happens to
  * contain the same set of objects as an existing one.  In that case
@@ -627,8 +630,7 @@ void free_pack_by_name(const char *pack_name)
 			close_pack_windows(p);
 			if (p->pack_fd != -1)
 				close(p->pack_fd);
-			if (p->index_data)
-				munmap((void *)p->index_data, p->index_size);
+			close_pack_index(p);
 			free(p->bad_object_sha1);
 			*pp = p->next;
 			free(p);
@@ -838,9 +840,8 @@ struct packed_git *add_packed_git(const char *path, int path_len, int local)
 	return p;
 }
 
-struct packed_git *parse_pack_index(unsigned char *sha1)
+struct packed_git *parse_pack_index(unsigned char *sha1, const char *idx_path)
 {
-	const char *idx_path = sha1_pack_index_name(sha1);
 	const char *path = sha1_pack_name(sha1);
 	struct packed_git *p = alloc_packed_git(strlen(path) + 1);
 
@@ -2278,7 +2279,7 @@ static int create_tmpfile(char *buffer, size_t bufsiz, const char *filename)
 }
 
 static int write_loose_object(const unsigned char *sha1, char *hdr, int hdrlen,
-			      void *buf, unsigned long len, time_t mtime)
+			      const void *buf, unsigned long len, time_t mtime)
 {
 	int fd, ret;
 	unsigned char compressed[4096];
@@ -2314,7 +2315,7 @@ static int write_loose_object(const unsigned char *sha1, char *hdr, int hdrlen,
 	git_SHA1_Update(&c, hdr, hdrlen);
 
 	/* Then the data itself.. */
-	stream.next_in = buf;
+	stream.next_in = (void *)buf;
 	stream.avail_in = len;
 	do {
 		unsigned char *in0 = stream.next_in;
@@ -2349,7 +2350,7 @@ static int write_loose_object(const unsigned char *sha1, char *hdr, int hdrlen,
 	return move_temp_to_file(tmpfile, filename);
 }
 
-int write_sha1_file(void *buf, unsigned long len, const char *type, unsigned char *returnsha1)
+int write_sha1_file(const void *buf, unsigned long len, const char *type, unsigned char *returnsha1)
 {
 	unsigned char sha1[20];
 	char hdr[32];
@@ -2455,6 +2456,8 @@ int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_object,
 		else
 			ret = -1;
 		strbuf_release(&sbuf);
+	} else if (!size) {
+		ret = index_mem(sha1, NULL, size, write_object, type, path);
 	} else if (size <= SMALL_FILE_SIZE) {
 		char *buf = xmalloc(size);
 		if (size == read_in_full(fd, buf, size))
@@ -2463,12 +2466,11 @@ int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_object,
 		else
 			ret = error("short read %s", strerror(errno));
 		free(buf);
-	} else if (size) {
+	} else {
 		void *buf = xmmap(NULL, size, PROT_READ, MAP_PRIVATE, fd, 0);
 		ret = index_mem(sha1, buf, size, write_object, type, path);
 		munmap(buf, size);
-	} else
-		ret = index_mem(sha1, NULL, size, write_object, type, path);
+	}
 	close(fd);
 	return ret;
 }
diff --git a/string-list.c b/string-list.c
index 1ac536e638..c9ad7fcd49 100644
--- a/string-list.c
+++ b/string-list.c
@@ -168,12 +168,19 @@ void sort_string_list(struct string_list *list)
 	qsort(list->items, list->nr, sizeof(*list->items), cmp_items);
 }
 
-int unsorted_string_list_has_string(struct string_list *list, const char *string)
+struct string_list_item *unsorted_string_list_lookup(struct string_list *list,
+						     const char *string)
 {
 	int i;
 	for (i = 0; i < list->nr; i++)
 		if (!strcmp(string, list->items[i].string))
-			return 1;
-	return 0;
+			return list->items + i;
+	return NULL;
+}
+
+int unsorted_string_list_has_string(struct string_list *list,
+				    const char *string)
+{
+	return unsorted_string_list_lookup(list, string) != NULL;
 }
 
diff --git a/string-list.h b/string-list.h
index 6569cf607b..63b69c8d75 100644
--- a/string-list.h
+++ b/string-list.h
@@ -38,5 +38,6 @@ struct string_list_item *string_list_lookup(const char *string, struct string_li
 struct string_list_item *string_list_append(const char *string, struct string_list *list);
 void sort_string_list(struct string_list *list);
 int unsorted_string_list_has_string(struct string_list *list, const char *string);
-
+struct string_list_item *unsorted_string_list_lookup(struct string_list *list,
+						     const char *string);
 #endif /* STRING_LIST_H */
diff --git a/submodule.c b/submodule.c
index 5d286e409e..676d48fb33 100644
--- a/submodule.c
+++ b/submodule.c
@@ -5,14 +5,22 @@
 #include "commit.h"
 #include "revision.h"
 #include "run-command.h"
+#include "diffcore.h"
 
 static int add_submodule_odb(const char *path)
 {
 	struct strbuf objects_directory = STRBUF_INIT;
 	struct alternate_object_database *alt_odb;
 	int ret = 0;
+	const char *git_dir;
 
-	strbuf_addf(&objects_directory, "%s/.git/objects/", path);
+	strbuf_addf(&objects_directory, "%s/.git", path);
+	git_dir = read_gitfile_gently(objects_directory.buf);
+	if (git_dir) {
+		strbuf_reset(&objects_directory);
+		strbuf_addstr(&objects_directory, git_dir);
+	}
+	strbuf_addstr(&objects_directory, "/objects/");
 	if (!is_directory(objects_directory.buf)) {
 		ret = -1;
 		goto done;
@@ -85,13 +93,21 @@ void show_submodule_summary(FILE *f, const char *path,
 			message = "(revision walker failed)";
 	}
 
+	if (dirty_submodule & DIRTY_SUBMODULE_UNTRACKED)
+		fprintf(f, "Submodule %s contains untracked content\n", path);
+	if (dirty_submodule & DIRTY_SUBMODULE_MODIFIED)
+		fprintf(f, "Submodule %s contains modified content\n", path);
+
+	if (!hashcmp(one, two)) {
+		strbuf_release(&sb);
+		return;
+	}
+
 	strbuf_addf(&sb, "Submodule %s %s..", path,
 			find_unique_abbrev(one, DEFAULT_ABBREV));
 	if (!fast_backward && !fast_forward)
 		strbuf_addch(&sb, '.');
 	strbuf_addf(&sb, "%s", find_unique_abbrev(two, DEFAULT_ABBREV));
-	if (dirty_submodule)
-		strbuf_add(&sb, "-dirty", 6);
 	if (message)
 		strbuf_addf(&sb, " %s\n", message);
 	else
@@ -121,23 +137,26 @@ void show_submodule_summary(FILE *f, const char *path,
 	strbuf_release(&sb);
 }
 
-int is_submodule_modified(const char *path)
+unsigned is_submodule_modified(const char *path, int ignore_untracked)
 {
-	int len, i;
+	ssize_t len;
 	struct child_process cp;
 	const char *argv[] = {
 		"status",
 		"--porcelain",
 		NULL,
+		NULL,
 	};
-	const char *env[LOCAL_REPO_ENV_SIZE + 3];
 	struct strbuf buf = STRBUF_INIT;
-
-	for (i = 0; i < LOCAL_REPO_ENV_SIZE; i++)
-		env[i] = local_repo_env[i];
-
-	strbuf_addf(&buf, "%s/.git/", path);
-	if (!is_directory(buf.buf)) {
+	unsigned dirty_submodule = 0;
+	const char *line, *next_line;
+	const char *git_dir;
+
+	strbuf_addf(&buf, "%s/.git", path);
+	git_dir = read_gitfile_gently(buf.buf);
+	if (!git_dir)
+		git_dir = buf.buf;
+	if (!is_directory(git_dir)) {
 		strbuf_release(&buf);
 		/* The submodule is not checked out, so it is not modified */
 		return 0;
@@ -145,29 +164,44 @@ int is_submodule_modified(const char *path)
 	}
 	strbuf_reset(&buf);
 
-	strbuf_addf(&buf, "GIT_WORK_TREE=%s", path);
-	env[i++] = strbuf_detach(&buf, NULL);
-	strbuf_addf(&buf, "GIT_DIR=%s/.git", path);
-	env[i++] = strbuf_detach(&buf, NULL);
-	env[i] = NULL;
+	if (ignore_untracked)
+		argv[2] = "-uno";
 
 	memset(&cp, 0, sizeof(cp));
 	cp.argv = argv;
-	cp.env = env;
+	cp.env = local_repo_env;
 	cp.git_cmd = 1;
 	cp.no_stdin = 1;
 	cp.out = -1;
+	cp.dir = path;
 	if (start_command(&cp))
 		die("Could not run git status --porcelain");
 
 	len = strbuf_read(&buf, cp.out, 1024);
+	line = buf.buf;
+	while (len > 2) {
+		if ((line[0] == '?') && (line[1] == '?')) {
+			dirty_submodule |= DIRTY_SUBMODULE_UNTRACKED;
+			if (dirty_submodule & DIRTY_SUBMODULE_MODIFIED)
+				break;
+		} else {
+			dirty_submodule |= DIRTY_SUBMODULE_MODIFIED;
+			if (ignore_untracked ||
+			    (dirty_submodule & DIRTY_SUBMODULE_UNTRACKED))
+				break;
+		}
+		next_line = strchr(line, '\n');
+		if (!next_line)
+			break;
+		next_line++;
+		len -= (next_line - line);
+		line = next_line;
+	}
 	close(cp.out);
 
 	if (finish_command(&cp))
 		die("git status --porcelain failed");
 
-	for (i = LOCAL_REPO_ENV_SIZE; env[i]; i++)
-		free((char *)env[i]);
 	strbuf_release(&buf);
-	return len != 0;
+	return dirty_submodule;
 }
diff --git a/submodule.h b/submodule.h
index 233696555e..dbda270873 100644
--- a/submodule.h
+++ b/submodule.h
@@ -5,6 +5,6 @@ void show_submodule_summary(FILE *f, const char *path,
 		unsigned char one[20], unsigned char two[20],
 		unsigned dirty_submodule,
 		const char *del, const char *add, const char *reset);
-int is_submodule_modified(const char *path);
+unsigned is_submodule_modified(const char *path, int ignore_untracked);
 
 #endif
diff --git a/t/README b/t/README
index dcd3ebb5f2..0e4e8d8862 100644
--- a/t/README
+++ b/t/README
@@ -84,6 +84,12 @@ appropriately before running "make".
 	implied by other options like --valgrind and
 	GIT_TEST_INSTALLED.
 
+--root=<directory>::
+	Create "trash" directories used to store all temporary data during
+	testing under <directory>, instead of the t/ directory.
+	Using this option with a RAM-based filesystem (such as tmpfs)
+	can massively speed up the test suite.
+
 You can also set the GIT_TEST_INSTALLED environment variable to
 the bindir of an existing git installation to test that installation.
 You still need to have built this git sandbox, from which various
diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh
index 28aff887b5..da4b8d5a6f 100644
--- a/t/lib-httpd.sh
+++ b/t/lib-httpd.sh
@@ -131,3 +131,32 @@ stop_httpd() {
 	"$LIB_HTTPD_PATH" -d "$HTTPD_ROOT_PATH" \
 		-f "$TEST_PATH/apache.conf" $HTTPD_PARA -k stop
 }
+
+test_http_push_nonff() {
+	REMOTE_REPO=$1
+	LOCAL_REPO=$2
+	BRANCH=$3
+
+	test_expect_success 'non-fast-forward push fails' '
+		cd "$REMOTE_REPO" &&
+		HEAD=$(git rev-parse --verify HEAD) &&
+
+		cd "$LOCAL_REPO" &&
+		git checkout $BRANCH &&
+		echo "changed" > path2 &&
+		git commit -a -m path2 --amend &&
+
+		!(git push -v origin >output 2>&1) &&
+		(cd "$REMOTE_REPO" &&
+		 test $HEAD = $(git rev-parse --verify HEAD))
+	'
+
+	test_expect_success 'non-fast-forward push show ref status' '
+		grep "^ ! \[rejected\][ ]*$BRANCH -> $BRANCH (non-fast-forward)$" output
+	'
+
+	test_expect_success 'non-fast-forward push shows help message' '
+		grep "To prevent you from losing history, non-fast-forward updates were rejected" \
+			output
+	'
+}
diff --git a/t/t6000lib.sh b/t/lib-t6000.sh
index 985d517a1c..985d517a1c 100644
--- a/t/t6000lib.sh
+++ b/t/lib-t6000.sh
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index f4ca4fc85c..3ec9cbef2c 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -73,6 +73,27 @@ then
 	exit 1
 fi
 
+clean=no
+test_expect_success 'tests clean up after themselves' '
+    test_when_finished clean=yes
+'
+
+cleaner=no
+test_expect_code 1 'tests clean up even after a failure' '
+    test_when_finished cleaner=yes &&
+    (exit 1)
+'
+
+if test $clean$cleaner != yesyes
+then
+	say "bug in test framework: cleanup commands do not work reliably"
+	exit 1
+fi
+
+test_expect_code 2 'failure to clean up causes the test to fail' '
+    test_when_finished "(exit 2)"
+'
+
 ################################################################
 # Basics of the basics
 
diff --git a/t/t0001-init.sh b/t/t0001-init.sh
index 5386504790..7c0a698b92 100755
--- a/t/t0001-init.sh
+++ b/t/t0001-init.sh
@@ -167,6 +167,25 @@ test_expect_success 'init with --template (blank)' '
 	! test -f template-blank/.git/info/exclude
 '
 
+test_expect_success 'init with init.templatedir set' '
+	mkdir templatedir-source &&
+	echo Content >templatedir-source/file &&
+	(
+		HOME="`pwd`" &&
+		export HOME &&
+		test_config="${HOME}/.gitconfig" &&
+		git config -f "$test_config"  init.templatedir "${HOME}/templatedir-source" &&
+		mkdir templatedir-set &&
+		cd templatedir-set &&
+		unset GIT_CONFIG_NOGLOBAL &&
+		unset GIT_TEMPLATE_DIR &&
+		NO_SET_GIT_TEMPLATE_DIR=t &&
+		export NO_SET_GIT_TEMPLATE_DIR &&
+		git init
+	) &&
+	test_cmp templatedir-source/file templatedir-set/.git/file
+'
+
 test_expect_success 'init --bare/--shared overrides system/global config' '
 	(
 		HOME="`pwd`" &&
@@ -291,4 +310,18 @@ test_expect_success POSIXPERM 'init notices EPERM' '
 	)
 '
 
+test_expect_success 'init creates a new bare directory with global --bare' '
+	rm -rf newdir &&
+	git --bare init newdir &&
+	test -d newdir/refs
+'
+
+test_expect_success 'init prefers command line to GIT_DIR' '
+	rm -rf newdir &&
+	mkdir otherdir &&
+	GIT_DIR=otherdir git --bare init newdir &&
+	test -d newdir/refs &&
+	! test -d otherdir/refs
+'
+
 test_done
diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh
index 1c77192eb3..53bd7fcc4a 100755
--- a/t/t0003-attributes.sh
+++ b/t/t0003-attributes.sh
@@ -20,8 +20,12 @@ test_expect_success 'setup' '
 
 	mkdir -p a/b/d a/c &&
 	(
+		echo "[attr]notest !test"
 		echo "f	test=f"
 		echo "a/i test=a/i"
+		echo "onoff test -test"
+		echo "offon -test test"
+		echo "no notest"
 	) >.gitattributes &&
 	(
 		echo "g test=a/g" &&
@@ -30,6 +34,7 @@ test_expect_success 'setup' '
 	(
 		echo "h test=a/b/h" &&
 		echo "d/* test=a/b/d/*"
+		echo "d/yes notest"
 	) >a/b/.gitattributes
 
 '
@@ -44,6 +49,11 @@ test_expect_success 'attribute test' '
 	attr_check b/g unspecified &&
 	attr_check a/b/h a/b/h &&
 	attr_check a/b/d/g "a/b/d/*"
+	attr_check onoff unset
+	attr_check offon set
+	attr_check no unspecified
+	attr_check a/b/d/no "a/b/d/*"
+	attr_check a/b/d/yes unspecified
 
 '
 
@@ -58,6 +68,11 @@ a/b/g: test: a/b/g
 b/g: test: unspecified
 a/b/h: test: a/b/h
 a/b/d/g: test: a/b/d/*
+onoff: test: unset
+offon: test: set
+no: test: unspecified
+a/b/d/no: test: a/b/d/*
+a/b/d/yes: test: unspecified
 EOF
 
 	sed -e "s/:.*//" < expect | git check-attr --stdin test > actual &&
diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh
index fd98e445bf..dd32432d62 100755
--- a/t/t1007-hash-object.sh
+++ b/t/t1007-hash-object.sh
@@ -65,10 +65,6 @@ test_expect_success "Can't use --path with --stdin-paths" '
 	echo example | test_must_fail git hash-object --stdin-paths --path=foo
 '
 
-test_expect_success "Can't use --stdin-paths with --no-filters" '
-	echo example | test_must_fail git hash-object --stdin-paths --no-filters
-'
-
 test_expect_success "Can't use --path with --no-filters" '
 	test_must_fail git hash-object --no-filters --path=foo
 '
@@ -141,6 +137,20 @@ test_expect_success 'check that --no-filters option works' '
 	git config --unset core.autocrlf
 '
 
+test_expect_success 'check that --no-filters option works with --stdin-paths' '
+	echo fooQ | tr Q "\\015" >file0 &&
+	cp file0 file1 &&
+	echo "file0 -crlf" >.gitattributes &&
+	echo "file1 crlf" >>.gitattributes &&
+	git config core.autocrlf true &&
+	file0_sha=$(git hash-object file0) &&
+	file1_sha=$(git hash-object file1) &&
+	test "$file0_sha" != "$file1_sha" &&
+	nofilters_file1=$(echo "file1" | git hash-object --stdin-paths --no-filters) &&
+	test "$file0_sha" = "$nofilters_file1" &&
+	git config --unset core.autocrlf
+'
+
 pop_repo
 
 for args in "-w --stdin" "--stdin -w"; do
diff --git a/t/t1304-default-acl.sh b/t/t1304-default-acl.sh
index cc30be4a65..055ad00f77 100755
--- a/t/t1304-default-acl.sh
+++ b/t/t1304-default-acl.sh
@@ -20,34 +20,23 @@ if ! setfacl -m u:root:rwx .; then
     test_done
 fi
 
-modebits () {
-	ls -l "$1" | sed -e 's|^\(..........\).*|\1|'
-}
-
 check_perms_and_acl () {
-	actual=$(modebits "$1") &&
-	case "$actual" in
-	-r--r-----*)
-		: happy
-		;;
-	*)
-		echo "Got permission '$actual', expected '-r--r-----'"
-		false
-		;;
-	esac &&
+	test -r "$1" &&
 	getfacl "$1" > actual &&
 	grep -q "user:root:rwx" actual &&
 	grep -q "user:${LOGNAME}:rwx" actual &&
-	grep -q "mask::r--" actual &&
+	egrep "mask::?r--" actual > /dev/null 2>&1 &&
 	grep -q "group::---" actual || false
 }
 
 dirs_to_set="./ .git/ .git/objects/ .git/objects/pack/"
 
 test_expect_success 'Setup test repo' '
+	setfacl -m d:u::rwx,d:g::---,d:o:---,d:m:rwx $dirs_to_set &&
+	setfacl -m m:rwx               $dirs_to_set &&
 	setfacl -m u:root:rwx          $dirs_to_set &&
-	setfacl -d -m u:"$LOGNAME":rwx $dirs_to_set &&
-	setfacl -d -m u:root:rwx       $dirs_to_set &&
+	setfacl -m d:u:"$LOGNAME":rwx  $dirs_to_set &&
+	setfacl -m d:u:root:rwx        $dirs_to_set &&
 
 	touch file.txt &&
 	git add file.txt &&
diff --git a/t/t1501-worktree.sh b/t/t1501-worktree.sh
index 9df301211c..bd8b60732b 100755
--- a/t/t1501-worktree.sh
+++ b/t/t1501-worktree.sh
@@ -30,6 +30,7 @@ test_rev_parse() {
 
 EMPTY_TREE=$(git write-tree)
 mkdir -p work/sub/dir || exit 1
+mkdir -p work2 || exit 1
 mv .git repo.git || exit 1
 
 say "core.worktree = relative path"
@@ -54,7 +55,9 @@ GIT_DIR=$(pwd)/repo.git
 GIT_CONFIG=$GIT_DIR/config
 git config core.worktree "$(pwd)/work"
 test_rev_parse 'outside'      false false false
-cd work || exit 1
+cd work2
+test_rev_parse 'outside2'     false false false
+cd ../work || exit 1
 test_rev_parse 'inside'       false false true ''
 cd sub/dir || exit 1
 test_rev_parse 'subdirectory' false false true sub/dir/
@@ -67,7 +70,9 @@ git config core.worktree non-existent
 GIT_WORK_TREE=work
 export GIT_WORK_TREE
 test_rev_parse 'outside'      false false false
-cd work || exit 1
+cd work2
+test_rev_parse 'outside'      false false false
+cd ../work || exit 1
 GIT_WORK_TREE=.
 test_rev_parse 'inside'       false false true ''
 cd sub/dir || exit 1
@@ -76,6 +81,7 @@ test_rev_parse 'subdirectory' false false true sub/dir/
 cd ../../.. || exit 1
 
 mv work repo.git/work
+mv work2 repo.git/work2
 
 say "GIT_WORK_TREE=absolute path, work tree below git dir"
 GIT_DIR=$(pwd)/repo.git
@@ -86,6 +92,8 @@ cd repo.git || exit 1
 test_rev_parse 'in repo.git'              false true  false
 cd objects || exit 1
 test_rev_parse 'in repo.git/objects'      false true  false
+cd ../work2 || exit 1
+test_rev_parse 'in repo.git/work2'      false true  false
 cd ../work || exit 1
 test_rev_parse 'in repo.git/work'         false true true ''
 cd sub/dir || exit 1
diff --git a/t/t1509-root-worktree.sh b/t/t1509-root-worktree.sh
new file mode 100755
index 0000000000..5322a3bf97
--- /dev/null
+++ b/t/t1509-root-worktree.sh
@@ -0,0 +1,249 @@
+#!/bin/sh
+
+test_description='Test Git when git repository is located at root
+
+This test requires write access in root. Do not bother if you do not
+have a throwaway chroot or VM.
+
+Script t1509/prepare-chroot.sh may help you setup chroot, then you
+can chroot in and execute this test from there.
+'
+
+. ./test-lib.sh
+
+test_cmp_val() {
+	echo "$1" > expected
+	echo "$2" > result
+	test_cmp expected result
+}
+
+test_vars() {
+	test_expect_success "$1: gitdir" '
+		test_cmp_val "'"$2"'" "$(git rev-parse --git-dir)"
+	'
+
+	test_expect_success "$1: worktree" '
+		test_cmp_val "'"$3"'" "$(git rev-parse --show-toplevel)"
+	'
+
+	test_expect_success "$1: prefix" '
+		test_cmp_val "'"$4"'" "$(git rev-parse --show-prefix)"
+	'
+}
+
+test_foobar_root() {
+	test_expect_success 'add relative' '
+		test -z "$(cd / && git ls-files)" &&
+		git add foo/foome &&
+		git add foo/bar/barme &&
+		git add me &&
+		( cd / && git ls-files --stage ) > result &&
+		test_cmp /ls.expected result &&
+		rm "$(git rev-parse --git-dir)/index"
+	'
+
+	test_expect_success 'add absolute' '
+		test -z "$(cd / && git ls-files)" &&
+		git add /foo/foome &&
+		git add /foo/bar/barme &&
+		git add /me &&
+		( cd / && git ls-files --stage ) > result &&
+		test_cmp /ls.expected result &&
+		rm "$(git rev-parse --git-dir)/index"
+	'
+
+}
+
+test_foobar_foo() {
+	test_expect_success 'add relative' '
+		test -z "$(cd / && git ls-files)" &&
+		git add foome &&
+		git add bar/barme &&
+		git add ../me &&
+		( cd / && git ls-files --stage ) > result &&
+		test_cmp /ls.expected result &&
+		rm "$(git rev-parse --git-dir)/index"
+	'
+
+	test_expect_success 'add absolute' '
+		test -z "$(cd / && git ls-files)" &&
+		git add /foo/foome &&
+		git add /foo/bar/barme &&
+		git add /me &&
+		( cd / && git ls-files --stage ) > result &&
+		test_cmp /ls.expected result &&
+		rm "$(git rev-parse --git-dir)/index"
+	'
+}
+
+test_foobar_foobar() {
+	test_expect_success 'add relative' '
+		test -z "$(cd / && git ls-files)" &&
+		git add ../foome &&
+		git add barme &&
+		git add ../../me &&
+		( cd / && git ls-files --stage ) > result &&
+		test_cmp /ls.expected result &&
+		rm "$(git rev-parse --git-dir)/index"
+	'
+
+	test_expect_success 'add absolute' '
+		test -z "$(cd / && git ls-files)" &&
+		git add /foo/foome &&
+		git add /foo/bar/barme &&
+		git add /me &&
+		( cd / && git ls-files --stage ) > result &&
+		test_cmp /ls.expected result &&
+		rm "$(git rev-parse --git-dir)/index"
+	'
+}
+
+if ! test_have_prereq POSIXPERM || ! [ -w / ]; then
+	say "Dangerous test skipped. Read this test if you want to execute it"
+	test_done
+fi
+
+if [ "$IKNOWWHATIAMDOING" != "YES" ]; then
+	say "You must set env var IKNOWWHATIAMDOING=YES in order to run this test"
+	test_done
+fi
+
+if [ "$UID" = 0 ]; then
+	say "No you can't run this with root"
+	test_done
+fi
+
+ONE_SHA1=d00491fd7e5bb6fa28c517a0bb32b8b506539d4d
+
+test_expect_success 'setup' '
+	rm -rf /foo
+	mkdir /foo &&
+	mkdir /foo/bar &&
+	echo 1 > /foo/foome &&
+	echo 1 > /foo/bar/barme &&
+	echo 1 > /me
+'
+
+say "GIT_DIR absolute, GIT_WORK_TREE set"
+
+test_expect_success 'go to /' 'cd /'
+
+cat >ls.expected <<EOF
+100644 $ONE_SHA1 0	foo/bar/barme
+100644 $ONE_SHA1 0	foo/foome
+100644 $ONE_SHA1 0	me
+EOF
+
+export GIT_DIR="$TRASH_DIRECTORY/.git"
+export GIT_WORK_TREE=/
+
+test_vars 'abs gitdir, root' "$GIT_DIR" "/" ""
+test_foobar_root
+
+test_expect_success 'go to /foo' 'cd /foo'
+
+test_vars 'abs gitdir, foo' "$GIT_DIR" "/" "foo/"
+test_foobar_foo
+
+test_expect_success 'go to /foo/bar' 'cd /foo/bar'
+
+test_vars 'abs gitdir, foo/bar' "$GIT_DIR" "/" "foo/bar/"
+test_foobar_foobar
+
+say "GIT_DIR relative, GIT_WORK_TREE set"
+
+test_expect_success 'go to /' 'cd /'
+
+export GIT_DIR="$(echo $TRASH_DIRECTORY|sed 's,^/,,')/.git"
+export GIT_WORK_TREE=/
+
+test_vars 'rel gitdir, root' "$GIT_DIR" "/" ""
+test_foobar_root
+
+test_expect_success 'go to /foo' 'cd /foo'
+
+export GIT_DIR="../$TRASH_DIRECTORY/.git"
+export GIT_WORK_TREE=/
+
+test_vars 'rel gitdir, foo' "$TRASH_DIRECTORY/.git" "/" "foo/"
+test_foobar_foo
+
+test_expect_success 'go to /foo/bar' 'cd /foo/bar'
+
+export GIT_DIR="../../$TRASH_DIRECTORY/.git"
+export GIT_WORK_TREE=/
+
+test_vars 'rel gitdir, foo/bar' "$TRASH_DIRECTORY/.git" "/" "foo/bar/"
+test_foobar_foobar
+
+say "GIT_DIR relative, GIT_WORK_TREE relative"
+
+test_expect_success 'go to /' 'cd /'
+
+export GIT_DIR="$(echo $TRASH_DIRECTORY|sed 's,^/,,')/.git"
+export GIT_WORK_TREE=.
+
+test_vars 'rel gitdir, root' "$GIT_DIR" "/" ""
+test_foobar_root
+
+test_expect_success 'go to /' 'cd /foo'
+
+export GIT_DIR="../$TRASH_DIRECTORY/.git"
+export GIT_WORK_TREE=..
+
+test_vars 'rel gitdir, foo' "$TRASH_DIRECTORY/.git" "/" "foo/"
+test_foobar_foo
+
+test_expect_success 'go to /foo/bar' 'cd /foo/bar'
+
+export GIT_DIR="../../$TRASH_DIRECTORY/.git"
+export GIT_WORK_TREE=../..
+
+test_vars 'rel gitdir, foo/bar' "$TRASH_DIRECTORY/.git" "/" "foo/bar/"
+test_foobar_foobar
+
+say ".git at root"
+
+unset GIT_DIR
+unset GIT_WORK_TREE
+
+test_expect_success 'go to /' 'cd /'
+test_expect_success 'setup' '
+	rm -rf /.git
+	echo "Initialized empty Git repository in /.git/" > expected &&
+	git init > result &&
+	test_cmp expected result
+'
+
+test_vars 'auto gitdir, root' ".git" "/" ""
+test_foobar_root
+
+test_expect_success 'go to /foo' 'cd /foo'
+test_vars 'auto gitdir, foo' "/.git" "/" "foo/"
+test_foobar_foo
+
+test_expect_success 'go to /foo/bar' 'cd /foo/bar'
+test_vars 'auto gitdir, foo/bar' "/.git" "/" "foo/bar/"
+test_foobar_foobar
+
+test_expect_success 'cleanup' 'rm -rf /.git'
+
+say "auto bare gitdir"
+
+# DESTROYYYYY!!!!!
+test_expect_success 'setup' '
+	rm -rf /refs /objects /info /hooks
+	rm /*
+	cd / &&
+	echo "Initialized empty Git repository in /" > expected &&
+	git init --bare > result &&
+	test_cmp expected result
+'
+
+test_vars 'auto gitdir, root' "." "" ""
+
+test_expect_success 'go to /foo' 'cd /foo'
+
+test_vars 'auto gitdir, root' "/" "" ""
+
+test_done
diff --git a/t/t1509/excludes b/t/t1509/excludes
new file mode 100644
index 0000000000..d4d21d31a9
--- /dev/null
+++ b/t/t1509/excludes
@@ -0,0 +1,14 @@
+*.o
+*~
+*.bak
+*.c
+*.h
+.git
+contrib
+Documentation
+git-gui
+gitk-git
+gitweb
+t/t4013
+t/t5100
+t/t5515
diff --git a/t/t1509/prepare-chroot.sh b/t/t1509/prepare-chroot.sh
new file mode 100755
index 0000000000..c5334a8fa4
--- /dev/null
+++ b/t/t1509/prepare-chroot.sh
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+die() {
+	echo >&2 "$@"
+	exit 1
+}
+
+xmkdir() {
+	while [ -n "$1" ]; do
+		[ -d "$1" ] || mkdir "$1" || die "Unable to mkdir $1"
+		shift
+	done
+}
+
+R="$1"
+
+[ -n "$R" ] || die "Usage: prepare-chroot.sh <root>"
+[ -x git ] || die "This script needs to be executed at git source code's top directory"
+[ -x /bin/busybox ] || die "You need busybox"
+
+xmkdir "$R" "$R/bin" "$R/etc" "$R/lib" "$R/dev"
+[ -c "$R/dev/null" ] || die "/dev/null is missing. Do mknod $R/dev/null c 1 3 && chmod 666 $R/dev/null"
+echo "root:x:0:0:root:/:/bin/sh" > "$R/etc/passwd"
+echo "$(id -nu):x:$(id -u):$(id -g)::$(pwd)/t:/bin/sh" >> "$R/etc/passwd"
+echo "root::0:root" > "$R/etc/group"
+echo "$(id -ng)::$(id -g):$(id -nu)" >> "$R/etc/group"
+
+[ -x "$R/bin/busybox" ] || cp /bin/busybox "$R/bin/busybox"
+[ -x "$R/bin/sh" ] || ln -s /bin/busybox "$R/bin/sh"
+[ -x "$R/bin/su" ] || ln -s /bin/busybox "$R/bin/su"
+
+mkdir -p "$R$(pwd)"
+rsync --exclude-from t/t1509/excludes -Ha . "$R$(pwd)"
+ldd git | grep '/' | sed 's,.*\s\(/[^ ]*\).*,\1,' | while read i; do
+	mkdir -p "$R$(dirname $i)"
+	cp "$i" "$R/$i"
+done
+echo "Execute this in root: 'chroot $R /bin/su - $(id -nu)'"
diff --git a/t/t2007-checkout-symlink.sh b/t/t2007-checkout-symlink.sh
index 20f33436d0..27e2127afe 100755
--- a/t/t2007-checkout-symlink.sh
+++ b/t/t2007-checkout-symlink.sh
@@ -44,8 +44,10 @@ test_expect_success 'switch from symlink to dir' '
 
 '
 
-rm -fr frotz xyzzy nitfol &&
-git checkout -f master || exit
+test_expect_success 'Remove temporary directories & switch to master' '
+	rm -fr frotz xyzzy nitfol &&
+	git checkout -f master
+'
 
 test_expect_success 'switch from dir to symlink' '
 
diff --git a/t/t2106-update-index-assume-unchanged.sh b/t/t2106-update-index-assume-unchanged.sh
new file mode 100755
index 0000000000..99d858c6b7
--- /dev/null
+++ b/t/t2106-update-index-assume-unchanged.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+test_description='git update-index --assume-unchanged test.
+'
+
+. ./test-lib.sh
+
+test_expect_success 'setup' \
+	': >file &&
+	 git add file &&
+	 git commit -m initial &&
+	 git branch other &&
+	 echo upstream >file &&
+	 git add file &&
+	 git commit -m upstream'
+
+test_expect_success 'do not switch branches with dirty file' \
+	'git reset --hard &&
+	 git checkout other &&
+	 echo dirt >file &&
+	 git update-index --assume-unchanged file &&
+	 test_must_fail git checkout master'
+
+test_done
diff --git a/t/t3020-ls-files-error-unmatch.sh b/t/t3020-ls-files-error-unmatch.sh
index f4066cbc09..a7d8187169 100755
--- a/t/t3020-ls-files-error-unmatch.sh
+++ b/t/t3020-ls-files-error-unmatch.sh
@@ -11,9 +11,11 @@ line.
 '
 . ./test-lib.sh
 
-touch foo bar
-git update-index --add foo bar
-git commit -m "add foo bar"
+test_expect_success 'setup' '
+	touch foo bar &&
+	git update-index --add foo bar &&
+	git commit -m "add foo bar"
+'
 
 test_expect_success \
     'git ls-files --error-unmatch should fail with unmatched path.' \
diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh
index 714626d2d6..64f32ad94d 100755
--- a/t/t3301-notes.sh
+++ b/t/t3301-notes.sh
@@ -13,11 +13,11 @@ echo "$MSG" > "$1"
 echo "$MSG" >& 2
 EOF
 chmod a+x fake_editor.sh
-VISUAL=./fake_editor.sh
-export VISUAL
+GIT_EDITOR=./fake_editor.sh
+export GIT_EDITOR
 
 test_expect_success 'cannot annotate non-existing HEAD' '
-	(MSG=3 && export MSG && test_must_fail git notes edit)
+	(MSG=3 && export MSG && test_must_fail git notes add)
 '
 
 test_expect_success setup '
@@ -33,18 +33,18 @@ test_expect_success setup '
 
 test_expect_success 'need valid notes ref' '
 	(MSG=1 GIT_NOTES_REF=/ && export MSG GIT_NOTES_REF &&
-	 test_must_fail git notes edit) &&
+	 test_must_fail git notes add) &&
 	(MSG=2 GIT_NOTES_REF=/ && export MSG GIT_NOTES_REF &&
 	 test_must_fail git notes show)
 '
 
-test_expect_success 'refusing to edit in refs/heads/' '
+test_expect_success 'refusing to add notes in refs/heads/' '
 	(MSG=1 GIT_NOTES_REF=refs/heads/bogus &&
 	 export MSG GIT_NOTES_REF &&
-	 test_must_fail git notes edit)
+	 test_must_fail git notes add)
 '
 
-test_expect_success 'refusing to edit in refs/remotes/' '
+test_expect_success 'refusing to edit notes in refs/remotes/' '
 	(MSG=1 GIT_NOTES_REF=refs/remotes/bogus &&
 	 export MSG GIT_NOTES_REF &&
 	 test_must_fail git notes edit)
@@ -55,10 +55,64 @@ test_expect_success 'handle empty notes gracefully' '
 	git notes show ; test 1 = $?
 '
 
+test_expect_success 'show non-existent notes entry with %N' '
+	for l in A B
+	do
+		echo "$l"
+	done >expect &&
+	git show -s --format='A%n%NB' >output &&
+	test_cmp expect output
+'
+
 test_expect_success 'create notes' '
 	git config core.notesRef refs/notes/commits &&
-	MSG=b1 git notes edit &&
-	test ! -f .git/new-notes &&
+	MSG=b4 git notes add &&
+	test ! -f .git/NOTES_EDITMSG &&
+	test 1 = $(git ls-tree refs/notes/commits | wc -l) &&
+	test b4 = $(git notes show) &&
+	git show HEAD^ &&
+	test_must_fail git notes show HEAD^
+'
+
+test_expect_success 'show notes entry with %N' '
+	for l in A b4 B
+	do
+		echo "$l"
+	done >expect &&
+	git show -s --format='A%n%NB' >output &&
+	test_cmp expect output
+'
+
+cat >expect <<EOF
+d423f8c refs/notes/commits@{0}: notes: Notes added by 'git notes add'
+EOF
+
+test_expect_success 'create reflog entry' '
+	git reflog show refs/notes/commits >output &&
+	test_cmp expect output
+'
+
+test_expect_success 'edit existing notes' '
+	MSG=b3 git notes edit &&
+	test ! -f .git/NOTES_EDITMSG &&
+	test 1 = $(git ls-tree refs/notes/commits | wc -l) &&
+	test b3 = $(git notes show) &&
+	git show HEAD^ &&
+	test_must_fail git notes show HEAD^
+'
+
+test_expect_success 'cannot add note where one exists' '
+	! MSG=b2 git notes add &&
+	test ! -f .git/NOTES_EDITMSG &&
+	test 1 = $(git ls-tree refs/notes/commits | wc -l) &&
+	test b3 = $(git notes show) &&
+	git show HEAD^ &&
+	test_must_fail git notes show HEAD^
+'
+
+test_expect_success 'can overwrite existing note with "git notes add -f"' '
+	MSG=b1 git notes add -f &&
+	test ! -f .git/NOTES_EDITMSG &&
 	test 1 = $(git ls-tree refs/notes/commits | wc -l) &&
 	test b1 = $(git notes show) &&
 	git show HEAD^ &&
@@ -81,6 +135,7 @@ test_expect_success 'show notes' '
 	git log -1 > output &&
 	test_cmp expect output
 '
+
 test_expect_success 'create multi-line notes (setup)' '
 	: > a3 &&
 	git add a3 &&
@@ -88,7 +143,7 @@ test_expect_success 'create multi-line notes (setup)' '
 	git commit -m 3rd &&
 	MSG="b3
 c3c3c3c3
-d3d3d3" git notes edit
+d3d3d3" git notes add
 '
 
 cat > expect-multiline << EOF
@@ -111,19 +166,16 @@ test_expect_success 'show multi-line notes' '
 	git log -2 > output &&
 	test_cmp expect-multiline output
 '
-test_expect_success 'create -m and -F notes (setup)' '
+test_expect_success 'create -F notes (setup)' '
 	: > a4 &&
 	git add a4 &&
 	test_tick &&
 	git commit -m 4th &&
 	echo "xyzzy" > note5 &&
-	git notes edit -m spam -F note5 -m "foo
-bar
-baz"
+	git notes add -F note5
 '
 
-whitespace="    "
-cat > expect-m-and-F << EOF
+cat > expect-F << EOF
 commit 15023535574ded8b1a89052b32673f84cf9582b8
 Author: A U Thor <author@example.com>
 Date:   Thu Apr 7 15:16:13 2005 -0700
@@ -131,21 +183,15 @@ Date:   Thu Apr 7 15:16:13 2005 -0700
     4th
 
 Notes:
-    spam
-$whitespace
     xyzzy
-$whitespace
-    foo
-    bar
-    baz
 EOF
 
-printf "\n" >> expect-m-and-F
-cat expect-multiline >> expect-m-and-F
+printf "\n" >> expect-F
+cat expect-multiline >> expect-F
 
-test_expect_success 'show -m and -F notes' '
+test_expect_success 'show -F notes' '
 	git log -3 > output &&
-	test_cmp expect-m-and-F output
+	test_cmp expect-F output
 '
 
 cat >expect << EOF
@@ -165,13 +211,7 @@ test_expect_success 'git log --pretty=raw does not show notes' '
 cat >>expect <<EOF
 
 Notes:
-    spam
-$whitespace
     xyzzy
-$whitespace
-    foo
-    bar
-    baz
 EOF
 test_expect_success 'git log --show-notes' '
 	git log -1 --pretty=raw --show-notes >output &&
@@ -180,17 +220,17 @@ test_expect_success 'git log --show-notes' '
 
 test_expect_success 'git log --no-notes' '
 	git log -1 --no-notes >output &&
-	! grep spam output
+	! grep xyzzy output
 '
 
 test_expect_success 'git format-patch does not show notes' '
 	git format-patch -1 --stdout >output &&
-	! grep spam output
+	! grep xyzzy output
 '
 
 test_expect_success 'git format-patch --show-notes does show notes' '
 	git format-patch --show-notes -1 --stdout >output &&
-	grep spam output
+	grep xyzzy output
 '
 
 for pretty in \
@@ -203,8 +243,805 @@ do
 	esac
 	test_expect_success "git show $pretty does$not show notes" '
 		git show $p >output &&
-		eval "$negate grep spam output"
+		eval "$negate grep xyzzy output"
 	'
 done
 
+test_expect_success 'create -m notes (setup)' '
+	: > a5 &&
+	git add a5 &&
+	test_tick &&
+	git commit -m 5th &&
+	git notes add -m spam -m "foo
+bar
+baz"
+'
+
+whitespace="    "
+cat > expect-m << EOF
+commit bd1753200303d0a0344be813e504253b3d98e74d
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:17:13 2005 -0700
+
+    5th
+
+Notes:
+    spam
+$whitespace
+    foo
+    bar
+    baz
+EOF
+
+printf "\n" >> expect-m
+cat expect-F >> expect-m
+
+test_expect_success 'show -m notes' '
+	git log -4 > output &&
+	test_cmp expect-m output
+'
+
+test_expect_success 'remove note with add -f -F /dev/null (setup)' '
+	git notes add -f -F /dev/null
+'
+
+cat > expect-rm-F << EOF
+commit bd1753200303d0a0344be813e504253b3d98e74d
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:17:13 2005 -0700
+
+    5th
+EOF
+
+printf "\n" >> expect-rm-F
+cat expect-F >> expect-rm-F
+
+test_expect_success 'verify note removal with -F /dev/null' '
+	git log -4 > output &&
+	test_cmp expect-rm-F output &&
+	! git notes show
+'
+
+test_expect_success 'do not create empty note with -m "" (setup)' '
+	git notes add -m ""
+'
+
+test_expect_success 'verify non-creation of note with -m ""' '
+	git log -4 > output &&
+	test_cmp expect-rm-F output &&
+	! git notes show
+'
+
+cat > expect-combine_m_and_F << EOF
+foo
+
+xyzzy
+
+bar
+
+zyxxy
+
+baz
+EOF
+
+test_expect_success 'create note with combination of -m and -F' '
+	echo "xyzzy" > note_a &&
+	echo "zyxxy" > note_b &&
+	git notes add -m "foo" -F note_a -m "bar" -F note_b -m "baz" &&
+	git notes show > output &&
+	test_cmp expect-combine_m_and_F output
+'
+
+test_expect_success 'remove note with "git notes remove" (setup)' '
+	git notes remove HEAD^ &&
+	git notes remove
+'
+
+cat > expect-rm-remove << EOF
+commit bd1753200303d0a0344be813e504253b3d98e74d
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:17:13 2005 -0700
+
+    5th
+
+commit 15023535574ded8b1a89052b32673f84cf9582b8
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:16:13 2005 -0700
+
+    4th
+EOF
+
+printf "\n" >> expect-rm-remove
+cat expect-multiline >> expect-rm-remove
+
+test_expect_success 'verify note removal with "git notes remove"' '
+	git log -4 > output &&
+	test_cmp expect-rm-remove output &&
+	! git notes show HEAD^
+'
+
+cat > expect << EOF
+c18dc024e14f08d18d14eea0d747ff692d66d6a3 1584215f1d29c65e99c6c6848626553fdd07fd75
+c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 268048bfb8a1fb38e703baceb8ab235421bf80c5
+EOF
+
+test_expect_success 'list notes with "git notes list"' '
+	git notes list > output &&
+	test_cmp expect output
+'
+
+test_expect_success 'list notes with "git notes"' '
+	git notes > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+c18dc024e14f08d18d14eea0d747ff692d66d6a3
+EOF
+
+test_expect_success 'list specific note with "git notes list <object>"' '
+	git notes list HEAD^^ > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+EOF
+
+test_expect_success 'listing non-existing notes fails' '
+	test_must_fail git notes list HEAD > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+Initial set of notes
+
+More notes appended with git notes append
+EOF
+
+test_expect_success 'append to existing note with "git notes append"' '
+	git notes add -m "Initial set of notes" &&
+	git notes append -m "More notes appended with git notes append" &&
+	git notes show > output &&
+	test_cmp expect output
+'
+
+cat > expect_list << EOF
+c18dc024e14f08d18d14eea0d747ff692d66d6a3 1584215f1d29c65e99c6c6848626553fdd07fd75
+c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 268048bfb8a1fb38e703baceb8ab235421bf80c5
+4b6ad22357cc8a1296720574b8d2fbc22fab0671 bd1753200303d0a0344be813e504253b3d98e74d
+EOF
+
+test_expect_success '"git notes list" does not expand to "git notes list HEAD"' '
+	git notes list > output &&
+	test_cmp expect_list output
+'
+
+test_expect_success 'appending empty string does not change existing note' '
+	git notes append -m "" &&
+	git notes show > output &&
+	test_cmp expect output
+'
+
+test_expect_success 'git notes append == add when there is no existing note' '
+	git notes remove HEAD &&
+	test_must_fail git notes list HEAD &&
+	git notes append -m "Initial set of notes
+
+More notes appended with git notes append" &&
+	git notes show > output &&
+	test_cmp expect output
+'
+
+test_expect_success 'appending empty string to non-existing note does not create note' '
+	git notes remove HEAD &&
+	test_must_fail git notes list HEAD &&
+	git notes append -m "" &&
+	test_must_fail git notes list HEAD
+'
+
+test_expect_success 'create other note on a different notes ref (setup)' '
+	: > a6 &&
+	git add a6 &&
+	test_tick &&
+	git commit -m 6th &&
+	GIT_NOTES_REF="refs/notes/other" git notes add -m "other note"
+'
+
+cat > expect-other << EOF
+commit 387a89921c73d7ed72cd94d179c1c7048ca47756
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:18:13 2005 -0700
+
+    6th
+
+Notes (other):
+    other note
+EOF
+
+cat > expect-not-other << EOF
+commit 387a89921c73d7ed72cd94d179c1c7048ca47756
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:18:13 2005 -0700
+
+    6th
+EOF
+
+test_expect_success 'Do not show note on other ref by default' '
+	git log -1 > output &&
+	test_cmp expect-not-other output
+'
+
+test_expect_success 'Do show note when ref is given in GIT_NOTES_REF' '
+	GIT_NOTES_REF="refs/notes/other" git log -1 > output &&
+	test_cmp expect-other output
+'
+
+test_expect_success 'Do show note when ref is given in core.notesRef config' '
+	git config core.notesRef "refs/notes/other" &&
+	git log -1 > output &&
+	test_cmp expect-other output
+'
+
+test_expect_success 'Do not show note when core.notesRef is overridden' '
+	GIT_NOTES_REF="refs/notes/wrong" git log -1 > output &&
+	test_cmp expect-not-other output
+'
+
+cat > expect-both << EOF
+commit 387a89921c73d7ed72cd94d179c1c7048ca47756
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:18:13 2005 -0700
+
+    6th
+
+Notes:
+    order test
+
+Notes (other):
+    other note
+
+commit bd1753200303d0a0344be813e504253b3d98e74d
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:17:13 2005 -0700
+
+    5th
+
+Notes:
+    replacement for deleted note
+EOF
+
+test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' '
+	GIT_NOTES_REF=refs/notes/commits git notes add \
+		-m"replacement for deleted note" HEAD^ &&
+	GIT_NOTES_REF=refs/notes/commits git notes add -m"order test" &&
+	git config --unset core.notesRef &&
+	git config notes.displayRef "refs/notes/*" &&
+	git log -2 > output &&
+	test_cmp expect-both output
+'
+
+test_expect_success 'core.notesRef is implicitly in notes.displayRef' '
+	git config core.notesRef refs/notes/commits &&
+	git config notes.displayRef refs/notes/other &&
+	git log -2 > output &&
+	test_cmp expect-both output
+'
+
+test_expect_success 'notes.displayRef can be given more than once' '
+	git config --unset core.notesRef &&
+	git config notes.displayRef refs/notes/commits &&
+	git config --add notes.displayRef refs/notes/other &&
+	git log -2 > output &&
+	test_cmp expect-both output
+'
+
+cat > expect-both-reversed << EOF
+commit 387a89921c73d7ed72cd94d179c1c7048ca47756
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:18:13 2005 -0700
+
+    6th
+
+Notes (other):
+    other note
+
+Notes:
+    order test
+EOF
+
+test_expect_success 'notes.displayRef respects order' '
+	git config core.notesRef refs/notes/other &&
+	git config --unset-all notes.displayRef &&
+	git config notes.displayRef refs/notes/commits &&
+	git log -1 > output &&
+	test_cmp expect-both-reversed output
+'
+
+test_expect_success 'GIT_NOTES_DISPLAY_REF works' '
+	git config --unset-all core.notesRef &&
+	git config --unset-all notes.displayRef &&
+	GIT_NOTES_DISPLAY_REF=refs/notes/commits:refs/notes/other \
+		git log -2 > output &&
+	test_cmp expect-both output
+'
+
+cat > expect-none << EOF
+commit 387a89921c73d7ed72cd94d179c1c7048ca47756
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:18:13 2005 -0700
+
+    6th
+
+commit bd1753200303d0a0344be813e504253b3d98e74d
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:17:13 2005 -0700
+
+    5th
+EOF
+
+test_expect_success 'GIT_NOTES_DISPLAY_REF overrides config' '
+	git config notes.displayRef "refs/notes/*" &&
+	GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log -2 > output &&
+	test_cmp expect-none output
+'
+
+test_expect_success '--show-notes=* adds to GIT_NOTES_DISPLAY_REF' '
+	GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log --show-notes=* -2 > output &&
+	test_cmp expect-both output
+'
+
+cat > expect-commits << EOF
+commit 387a89921c73d7ed72cd94d179c1c7048ca47756
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:18:13 2005 -0700
+
+    6th
+
+Notes:
+    order test
+EOF
+
+test_expect_success '--no-standard-notes' '
+	git log --no-standard-notes --show-notes=commits -1 > output &&
+	test_cmp expect-commits output
+'
+
+test_expect_success '--standard-notes' '
+	git log --no-standard-notes --show-notes=commits \
+		--standard-notes -2 > output &&
+	test_cmp expect-both output
+'
+
+test_expect_success '--show-notes=ref accumulates' '
+	git log --show-notes=other --show-notes=commits \
+		 --no-standard-notes -1 > output &&
+	test_cmp expect-both-reversed output
+'
+
+test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' '
+	git config core.notesRef refs/notes/other &&
+	echo "Note on a tree" > expect
+	git notes add -m "Note on a tree" HEAD: &&
+	git notes show HEAD: > actual &&
+	test_cmp expect actual &&
+	echo "Note on a blob" > expect
+	filename=$(git ls-tree --name-only HEAD | head -n1) &&
+	git notes add -m "Note on a blob" HEAD:$filename &&
+	git notes show HEAD:$filename > actual &&
+	test_cmp expect actual &&
+	echo "Note on a tag" > expect
+	git tag -a -m "This is an annotated tag" foobar HEAD^ &&
+	git notes add -m "Note on a tag" foobar &&
+	git notes show foobar > actual &&
+	test_cmp expect actual
+'
+
+cat > expect << EOF
+commit 2ede89468182a62d0bde2583c736089bcf7d7e92
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:19:13 2005 -0700
+
+    7th
+
+Notes (other):
+    other note
+EOF
+
+test_expect_success 'create note from other note with "git notes add -C"' '
+	: > a7 &&
+	git add a7 &&
+	test_tick &&
+	git commit -m 7th &&
+	git notes add -C $(git notes list HEAD^) &&
+	git log -1 > actual &&
+	test_cmp expect actual &&
+	test "$(git notes list HEAD)" = "$(git notes list HEAD^)"
+'
+
+test_expect_success 'create note from non-existing note with "git notes add -C" fails' '
+	: > a8 &&
+	git add a8 &&
+	test_tick &&
+	git commit -m 8th &&
+	test_must_fail git notes add -C deadbeef &&
+	test_must_fail git notes list HEAD
+'
+
+cat > expect << EOF
+commit 016e982bad97eacdbda0fcbd7ce5b0ba87c81f1b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:21:13 2005 -0700
+
+    9th
+
+Notes (other):
+    yet another note
+EOF
+
+test_expect_success 'create note from other note with "git notes add -c"' '
+	: > a9 &&
+	git add a9 &&
+	test_tick &&
+	git commit -m 9th &&
+	MSG="yet another note" git notes add -c $(git notes list HEAD^^) &&
+	git log -1 > actual &&
+	test_cmp expect actual
+'
+
+test_expect_success 'create note from non-existing note with "git notes add -c" fails' '
+	: > a10 &&
+	git add a10 &&
+	test_tick &&
+	git commit -m 10th &&
+	test_must_fail MSG="yet another note" git notes add -c deadbeef &&
+	test_must_fail git notes list HEAD
+'
+
+cat > expect << EOF
+commit 016e982bad97eacdbda0fcbd7ce5b0ba87c81f1b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:21:13 2005 -0700
+
+    9th
+
+Notes (other):
+    yet another note
+$whitespace
+    yet another note
+EOF
+
+test_expect_success 'append to note from other note with "git notes append -C"' '
+	git notes append -C $(git notes list HEAD^) HEAD^ &&
+	git log -1 HEAD^ > actual &&
+	test_cmp expect actual
+'
+
+cat > expect << EOF
+commit ffed603236bfa3891c49644257a83598afe8ae5a
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:22:13 2005 -0700
+
+    10th
+
+Notes (other):
+    other note
+EOF
+
+test_expect_success 'create note from other note with "git notes append -c"' '
+	MSG="other note" git notes append -c $(git notes list HEAD^) &&
+	git log -1 > actual &&
+	test_cmp expect actual
+'
+
+cat > expect << EOF
+commit ffed603236bfa3891c49644257a83598afe8ae5a
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:22:13 2005 -0700
+
+    10th
+
+Notes (other):
+    other note
+$whitespace
+    yet another note
+EOF
+
+test_expect_success 'append to note from other note with "git notes append -c"' '
+	MSG="yet another note" git notes append -c $(git notes list HEAD) &&
+	git log -1 > actual &&
+	test_cmp expect actual
+'
+
+cat > expect << EOF
+commit 6352c5e33dbcab725fe0579be16aa2ba8eb369be
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:23:13 2005 -0700
+
+    11th
+
+Notes (other):
+    other note
+$whitespace
+    yet another note
+EOF
+
+test_expect_success 'copy note with "git notes copy"' '
+	: > a11 &&
+	git add a11 &&
+	test_tick &&
+	git commit -m 11th &&
+	git notes copy HEAD^ HEAD &&
+	git log -1 > actual &&
+	test_cmp expect actual &&
+	test "$(git notes list HEAD)" = "$(git notes list HEAD^)"
+'
+
+test_expect_success 'prevent overwrite with "git notes copy"' '
+	test_must_fail git notes copy HEAD~2 HEAD &&
+	git log -1 > actual &&
+	test_cmp expect actual &&
+	test "$(git notes list HEAD)" = "$(git notes list HEAD^)"
+'
+
+cat > expect << EOF
+commit 6352c5e33dbcab725fe0579be16aa2ba8eb369be
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:23:13 2005 -0700
+
+    11th
+
+Notes (other):
+    yet another note
+$whitespace
+    yet another note
+EOF
+
+test_expect_success 'allow overwrite with "git notes copy -f"' '
+	git notes copy -f HEAD~2 HEAD &&
+	git log -1 > actual &&
+	test_cmp expect actual &&
+	test "$(git notes list HEAD)" = "$(git notes list HEAD~2)"
+'
+
+test_expect_success 'cannot copy note from object without notes' '
+	: > a12 &&
+	git add a12 &&
+	test_tick &&
+	git commit -m 12th &&
+	: > a13 &&
+	git add a13 &&
+	test_tick &&
+	git commit -m 13th &&
+	test_must_fail git notes copy HEAD^ HEAD
+'
+
+cat > expect << EOF
+commit e5d4fb5698d564ab8c73551538ecaf2b0c666185
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:25:13 2005 -0700
+
+    13th
+
+Notes (other):
+    yet another note
+$whitespace
+    yet another note
+
+commit 7038787dfe22a14c3867ce816dbba39845359719
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:24:13 2005 -0700
+
+    12th
+
+Notes (other):
+    other note
+$whitespace
+    yet another note
+EOF
+
+test_expect_success 'git notes copy --stdin' '
+	(echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \
+	echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) |
+	git notes copy --stdin &&
+	git log -2 > output &&
+	test_cmp expect output &&
+	test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" &&
+	test "$(git notes list HEAD^)" = "$(git notes list HEAD~3)"
+'
+
+cat > expect << EOF
+commit 37a0d4cba38afef96ba54a3ea567e6dac575700b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:27:13 2005 -0700
+
+    15th
+
+commit be28d8b4d9951ad940d229ee3b0b9ee3b1ec273d
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:26:13 2005 -0700
+
+    14th
+EOF
+
+test_expect_success 'git notes copy --for-rewrite (unconfigured)' '
+	test_commit 14th &&
+	test_commit 15th &&
+	(echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \
+	echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) |
+	git notes copy --for-rewrite=foo &&
+	git log -2 > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+commit 37a0d4cba38afef96ba54a3ea567e6dac575700b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:27:13 2005 -0700
+
+    15th
+
+Notes (other):
+    yet another note
+$whitespace
+    yet another note
+
+commit be28d8b4d9951ad940d229ee3b0b9ee3b1ec273d
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:26:13 2005 -0700
+
+    14th
+
+Notes (other):
+    other note
+$whitespace
+    yet another note
+EOF
+
+test_expect_success 'git notes copy --for-rewrite (enabled)' '
+	git config notes.rewriteMode overwrite &&
+	git config notes.rewriteRef "refs/notes/*" &&
+	(echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \
+	echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) |
+	git notes copy --for-rewrite=foo &&
+	git log -2 > output &&
+	test_cmp expect output
+'
+
+test_expect_success 'git notes copy --for-rewrite (disabled)' '
+	git config notes.rewrite.bar false &&
+	echo $(git rev-parse HEAD~3) $(git rev-parse HEAD) |
+	git notes copy --for-rewrite=bar &&
+	git log -2 > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+commit 37a0d4cba38afef96ba54a3ea567e6dac575700b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:27:13 2005 -0700
+
+    15th
+
+Notes (other):
+    a fresh note
+EOF
+
+test_expect_success 'git notes copy --for-rewrite (overwrite)' '
+	git notes add -f -m"a fresh note" HEAD^ &&
+	echo $(git rev-parse HEAD^) $(git rev-parse HEAD) |
+	git notes copy --for-rewrite=foo &&
+	git log -1 > output &&
+	test_cmp expect output
+'
+
+test_expect_success 'git notes copy --for-rewrite (ignore)' '
+	git config notes.rewriteMode ignore &&
+	echo $(git rev-parse HEAD^) $(git rev-parse HEAD) |
+	git notes copy --for-rewrite=foo &&
+	git log -1 > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+commit 37a0d4cba38afef96ba54a3ea567e6dac575700b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:27:13 2005 -0700
+
+    15th
+
+Notes (other):
+    a fresh note
+    another fresh note
+EOF
+
+test_expect_success 'git notes copy --for-rewrite (append)' '
+	git notes add -f -m"another fresh note" HEAD^ &&
+	git config notes.rewriteMode concatenate &&
+	echo $(git rev-parse HEAD^) $(git rev-parse HEAD) |
+	git notes copy --for-rewrite=foo &&
+	git log -1 > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+commit 37a0d4cba38afef96ba54a3ea567e6dac575700b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:27:13 2005 -0700
+
+    15th
+
+Notes (other):
+    a fresh note
+    another fresh note
+    append 1
+    append 2
+EOF
+
+test_expect_success 'git notes copy --for-rewrite (append two to one)' '
+	git notes add -f -m"append 1" HEAD^ &&
+	git notes add -f -m"append 2" HEAD^^ &&
+	(echo $(git rev-parse HEAD^) $(git rev-parse HEAD);
+	echo $(git rev-parse HEAD^^) $(git rev-parse HEAD)) |
+	git notes copy --for-rewrite=foo &&
+	git log -1 > output &&
+	test_cmp expect output
+'
+
+test_expect_success 'git notes copy --for-rewrite (append empty)' '
+	git notes remove HEAD^ &&
+	echo $(git rev-parse HEAD^) $(git rev-parse HEAD) |
+	git notes copy --for-rewrite=foo &&
+	git log -1 > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+commit 37a0d4cba38afef96ba54a3ea567e6dac575700b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:27:13 2005 -0700
+
+    15th
+
+Notes (other):
+    replacement note 1
+EOF
+
+test_expect_success 'GIT_NOTES_REWRITE_MODE works' '
+	git notes add -f -m"replacement note 1" HEAD^ &&
+	echo $(git rev-parse HEAD^) $(git rev-parse HEAD) |
+	GIT_NOTES_REWRITE_MODE=overwrite git notes copy --for-rewrite=foo &&
+	git log -1 > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+commit 37a0d4cba38afef96ba54a3ea567e6dac575700b
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:27:13 2005 -0700
+
+    15th
+
+Notes (other):
+    replacement note 2
+EOF
+
+test_expect_success 'GIT_NOTES_REWRITE_REF works' '
+	git config notes.rewriteMode overwrite &&
+	git notes add -f -m"replacement note 2" HEAD^ &&
+	git config --unset-all notes.rewriteRef &&
+	echo $(git rev-parse HEAD^) $(git rev-parse HEAD) |
+	GIT_NOTES_REWRITE_REF=refs/notes/commits:refs/notes/other \
+		git notes copy --for-rewrite=foo &&
+	git log -1 > output &&
+	test_cmp expect output
+'
+
+test_expect_success 'GIT_NOTES_REWRITE_REF overrides config' '
+	git config notes.rewriteRef refs/notes/other &&
+	git notes add -f -m"replacement note 3" HEAD^ &&
+	echo $(git rev-parse HEAD^) $(git rev-parse HEAD) |
+	GIT_NOTES_REWRITE_REF= git notes copy --for-rewrite=foo &&
+	git log -1 > output &&
+	test_cmp expect output
+'
 test_done
diff --git a/t/t3303-notes-subtrees.sh b/t/t3303-notes-subtrees.sh
index edc4bc8841..75ec18778e 100755
--- a/t/t3303-notes-subtrees.sh
+++ b/t/t3303-notes-subtrees.sh
@@ -95,12 +95,12 @@ INPUT_END
 test_expect_success 'test notes in 2/38-fanout' 'test_sha1_based "s|^..|&/|"'
 test_expect_success 'verify notes in 2/38-fanout' 'verify_notes'
 
-test_expect_success 'test notes in 4/36-fanout' 'test_sha1_based "s|^....|&/|"'
-test_expect_success 'verify notes in 4/36-fanout' 'verify_notes'
-
 test_expect_success 'test notes in 2/2/36-fanout' 'test_sha1_based "s|^\(..\)\(..\)|\1/\2/|"'
 test_expect_success 'verify notes in 2/2/36-fanout' 'verify_notes'
 
+test_expect_success 'test notes in 2/2/2/34-fanout' 'test_sha1_based "s|^\(..\)\(..\)\(..\)|\1/\2/\3/|"'
+test_expect_success 'verify notes in 2/2/2/34-fanout' 'verify_notes'
+
 test_same_notes () {
 	(
 		start_note_commit &&
@@ -128,14 +128,17 @@ INPUT_END
 	git fast-import --quiet
 }
 
-test_expect_success 'test same notes in 4/36-fanout and 2/38-fanout' 'test_same_notes "s|^..|&/|" "s|^....|&/|"'
-test_expect_success 'verify same notes in 4/36-fanout and 2/38-fanout' 'verify_notes'
+test_expect_success 'test same notes in no fanout and 2/38-fanout' 'test_same_notes "s|^..|&/|" ""'
+test_expect_success 'verify same notes in no fanout and 2/38-fanout' 'verify_notes'
+
+test_expect_success 'test same notes in no fanout and 2/2/36-fanout' 'test_same_notes "s|^\(..\)\(..\)|\1/\2/|" ""'
+test_expect_success 'verify same notes in no fanout and 2/2/36-fanout' 'verify_notes'
 
 test_expect_success 'test same notes in 2/38-fanout and 2/2/36-fanout' 'test_same_notes "s|^\(..\)\(..\)|\1/\2/|" "s|^..|&/|"'
 test_expect_success 'verify same notes in 2/38-fanout and 2/2/36-fanout' 'verify_notes'
 
-test_expect_success 'test same notes in 4/36-fanout and 2/2/36-fanout' 'test_same_notes "s|^\(..\)\(..\)|\1/\2/|" "s|^....|&/|"'
-test_expect_success 'verify same notes in 4/36-fanout and 2/2/36-fanout' 'verify_notes'
+test_expect_success 'test same notes in 2/2/2/34-fanout and 2/2/36-fanout' 'test_same_notes "s|^\(..\)\(..\)|\1/\2/|" "s|^\(..\)\(..\)\(..\)|\1/\2/\3/|"'
+test_expect_success 'verify same notes in 2/2/2/34-fanout and 2/2/36-fanout' 'verify_notes'
 
 test_concatenated_notes () {
 	(
@@ -176,13 +179,16 @@ verify_concatenated_notes () {
     test_cmp expect output
 }
 
-test_expect_success 'test notes in 4/36-fanout concatenated with 2/38-fanout' 'test_concatenated_notes "s|^..|&/|" "s|^....|&/|"'
-test_expect_success 'verify notes in 4/36-fanout concatenated with 2/38-fanout' 'verify_concatenated_notes'
+test_expect_success 'test notes in no fanout concatenated with 2/38-fanout' 'test_concatenated_notes "s|^..|&/|" ""'
+test_expect_success 'verify notes in no fanout concatenated with 2/38-fanout' 'verify_concatenated_notes'
+
+test_expect_success 'test notes in no fanout concatenated with 2/2/36-fanout' 'test_concatenated_notes "s|^\(..\)\(..\)|\1/\2/|" ""'
+test_expect_success 'verify notes in no fanout concatenated with 2/2/36-fanout' 'verify_concatenated_notes'
 
 test_expect_success 'test notes in 2/38-fanout concatenated with 2/2/36-fanout' 'test_concatenated_notes "s|^\(..\)\(..\)|\1/\2/|" "s|^..|&/|"'
 test_expect_success 'verify notes in 2/38-fanout concatenated with 2/2/36-fanout' 'verify_concatenated_notes'
 
-test_expect_success 'test notes in 4/36-fanout concatenated with 2/2/36-fanout' 'test_concatenated_notes "s|^\(..\)\(..\)|\1/\2/|" "s|^....|&/|"'
-test_expect_success 'verify notes in 4/36-fanout concatenated with 2/2/36-fanout' 'verify_concatenated_notes'
+test_expect_success 'test notes in 2/2/36-fanout concatenated with 2/2/2/34-fanout' 'test_concatenated_notes "s|^\(..\)\(..\)\(..\)|\1/\2/\3/|" "s|^\(..\)\(..\)|\1/\2/|"'
+test_expect_success 'verify notes in 2/2/36-fanout concatenated with 2/2/2/34-fanout' 'verify_concatenated_notes'
 
 test_done
diff --git a/t/t3304-notes-mixed.sh b/t/t3304-notes-mixed.sh
index 256687ffb5..1709e8c00b 100755
--- a/t/t3304-notes-mixed.sh
+++ b/t/t3304-notes-mixed.sh
@@ -131,6 +131,17 @@ data <<EOF
 another non-note with SHA1-like name
 EOF
 
+M 644 inline de/adbeefdeadbeefdeadbeefdeadbeefdeadbeef
+data <<EOF
+This is actually a valid note, albeit to a non-existing object.
+It is needed in order to trigger the "mishandling" of the dead/beef non-note.
+EOF
+
+M 644 inline dead/beef
+data <<EOF
+yet another non-note with SHA1-like name
+EOF
+
 INPUT_END
 	git fast-import --quiet <input &&
 	git config core.notesRef refs/notes/commits
@@ -158,6 +169,9 @@ EXPECT_END
 cat >expect_nn3 <<EXPECT_END
 another non-note with SHA1-like name
 EXPECT_END
+cat >expect_nn4 <<EXPECT_END
+yet another non-note with SHA1-like name
+EXPECT_END
 
 test_expect_success "verify contents of non-notes" '
 
@@ -166,7 +180,27 @@ test_expect_success "verify contents of non-notes" '
 	git cat-file -p refs/notes/commits:deadbeef > actual_nn2 &&
 	test_cmp expect_nn2 actual_nn2 &&
 	git cat-file -p refs/notes/commits:de/adbeef > actual_nn3 &&
-	test_cmp expect_nn3 actual_nn3
+	test_cmp expect_nn3 actual_nn3 &&
+	git cat-file -p refs/notes/commits:dead/beef > actual_nn4 &&
+	test_cmp expect_nn4 actual_nn4
+'
+
+test_expect_success "git-notes preserves non-notes" '
+
+	test_tick &&
+	git notes add -f -m "foo bar"
+'
+
+test_expect_success "verify contents of non-notes after git-notes" '
+
+	git cat-file -p refs/notes/commits:foobar/non-note.txt > actual_nn1 &&
+	test_cmp expect_nn1 actual_nn1 &&
+	git cat-file -p refs/notes/commits:deadbeef > actual_nn2 &&
+	test_cmp expect_nn2 actual_nn2 &&
+	git cat-file -p refs/notes/commits:de/adbeef > actual_nn3 &&
+	test_cmp expect_nn3 actual_nn3 &&
+	git cat-file -p refs/notes/commits:dead/beef > actual_nn4 &&
+	test_cmp expect_nn4 actual_nn4
 '
 
 test_done
diff --git a/t/t3305-notes-fanout.sh b/t/t3305-notes-fanout.sh
new file mode 100755
index 0000000000..b1ea64b213
--- /dev/null
+++ b/t/t3305-notes-fanout.sh
@@ -0,0 +1,95 @@
+#!/bin/sh
+
+test_description='Test that adding/removing many notes triggers automatic fanout restructuring'
+
+. ./test-lib.sh
+
+test_expect_success 'creating many notes with git-notes' '
+	num_notes=300 &&
+	i=0 &&
+	while test $i -lt $num_notes
+	do
+		i=$(($i + 1)) &&
+		test_tick &&
+		echo "file for commit #$i" > file &&
+		git add file &&
+		git commit -q -m "commit #$i" &&
+		git notes add -m "note #$i" || return 1
+	done
+'
+
+test_expect_success 'many notes created correctly with git-notes' '
+	git log | grep "^    " > output &&
+	i=300 &&
+	while test $i -gt 0
+	do
+		echo "    commit #$i" &&
+		echo "    note #$i" &&
+		i=$(($i - 1));
+	done > expect &&
+	test_cmp expect output
+'
+
+test_expect_success 'many notes created with git-notes triggers fanout' '
+	# Expect entire notes tree to have a fanout == 1
+	git ls-tree -r --name-only refs/notes/commits |
+	while read path
+	do
+		case "$path" in
+		??/??????????????????????????????????????)
+			: true
+			;;
+		*)
+			echo "Invalid path \"$path\"" &&
+			return 1
+			;;
+		esac
+	done
+'
+
+test_expect_success 'deleting most notes with git-notes' '
+	num_notes=250 &&
+	i=0 &&
+	git rev-list HEAD |
+	while read sha1
+	do
+		i=$(($i + 1)) &&
+		if test $i -gt $num_notes
+		then
+			break
+		fi &&
+		test_tick &&
+		git notes remove "$sha1"
+	done
+'
+
+test_expect_success 'most notes deleted correctly with git-notes' '
+	git log HEAD~250 | grep "^    " > output &&
+	i=50 &&
+	while test $i -gt 0
+	do
+		echo "    commit #$i" &&
+		echo "    note #$i" &&
+		i=$(($i - 1));
+	done > expect &&
+	test_cmp expect output
+'
+
+test_expect_success 'deleting most notes triggers fanout consolidation' '
+	# Expect entire notes tree to have a fanout == 0
+	git ls-tree -r --name-only refs/notes/commits |
+	while read path
+	do
+		case "$path" in
+		????????????????????????????????????????)
+			: true
+			;;
+		*)
+			echo "Invalid path \"$path\"" &&
+			return 1
+			;;
+		esac
+	done
+'
+
+test_done
diff --git a/t/t3306-notes-prune.sh b/t/t3306-notes-prune.sh
new file mode 100755
index 0000000000..a0ed0353e6
--- /dev/null
+++ b/t/t3306-notes-prune.sh
@@ -0,0 +1,94 @@
+#!/bin/sh
+
+test_description='Test git notes prune'
+
+. ./test-lib.sh
+
+test_expect_success 'setup: create a few commits with notes' '
+
+	: > file1 &&
+	git add file1 &&
+	test_tick &&
+	git commit -m 1st &&
+	git notes add -m "Note #1" &&
+	: > file2 &&
+	git add file2 &&
+	test_tick &&
+	git commit -m 2nd &&
+	git notes add -m "Note #2" &&
+	: > file3 &&
+	git add file3 &&
+	test_tick &&
+	git commit -m 3rd &&
+	git notes add -m "Note #3"
+'
+
+cat > expect <<END_OF_LOG
+commit 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:15:13 2005 -0700
+
+    3rd
+
+Notes:
+    Note #3
+
+commit 08341ad9e94faa089d60fd3f523affb25c6da189
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:14:13 2005 -0700
+
+    2nd
+
+Notes:
+    Note #2
+
+commit ab5f302035f2e7aaf04265f08b42034c23256e1f
+Author: A U Thor <author@example.com>
+Date:   Thu Apr 7 15:13:13 2005 -0700
+
+    1st
+
+Notes:
+    Note #1
+END_OF_LOG
+
+test_expect_success 'verify commits and notes' '
+
+	git log > actual &&
+	test_cmp expect actual
+'
+
+test_expect_success 'remove some commits' '
+
+	git reset --hard HEAD~2 &&
+	git reflog expire --expire=now HEAD &&
+	git gc --prune=now
+'
+
+test_expect_success 'verify that commits are gone' '
+
+	! git cat-file -p 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 &&
+	! git cat-file -p 08341ad9e94faa089d60fd3f523affb25c6da189 &&
+	git cat-file -p ab5f302035f2e7aaf04265f08b42034c23256e1f
+'
+
+test_expect_success 'verify that notes are still present' '
+
+	git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 &&
+	git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 &&
+	git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f
+'
+
+test_expect_success 'prune notes' '
+
+	git notes prune
+'
+
+test_expect_success 'verify that notes are gone' '
+
+	! git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 &&
+	! git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 &&
+	git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f
+'
+
+test_done
diff --git a/t/t3307-notes-man.sh b/t/t3307-notes-man.sh
new file mode 100755
index 0000000000..3269f2eebd
--- /dev/null
+++ b/t/t3307-notes-man.sh
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+test_description='Examples from the git-notes man page
+
+Make sure the manual is not full of lies.'
+
+. ./test-lib.sh
+
+test_expect_success 'setup' '
+	test_commit A &&
+	test_commit B &&
+	test_commit C
+'
+
+test_expect_success 'example 1: notes to add an Acked-by line' '
+	cat <<-\EOF >expect &&
+	    B
+
+	Notes:
+	    Acked-by: A C Ker <acker@example.com>
+	EOF
+	git notes add -m "Acked-by: A C Ker <acker@example.com>" B &&
+	git show -s B^{commit} >log &&
+	tail -n 4 log >actual &&
+	test_cmp expect actual
+'
+
+test_expect_success 'example 2: binary notes' '
+	cp "$TEST_DIRECTORY"/test4012.png .
+	git checkout B &&
+	blob=$(git hash-object -w test4012.png) &&
+	git notes --ref=logo add -C "$blob" &&
+	git notes --ref=logo copy B C &&
+	git notes --ref=logo show C >actual &&
+	test_cmp test4012.png actual
+'
+
+test_done
diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh
index 4314ad2d66..dbf7dfba9b 100755
--- a/t/t3400-rebase.sh
+++ b/t/t3400-rebase.sh
@@ -151,4 +151,21 @@ test_expect_success 'Rebase a commit that sprinkles CRs in' '
 	git diff --exit-code file-with-cr:CR HEAD:CR
 '
 
+test_expect_success 'rebase can copy notes' '
+	git config notes.rewrite.rebase true &&
+	git config notes.rewriteRef "refs/notes/*" &&
+	test_commit n1 &&
+	test_commit n2 &&
+	test_commit n3 &&
+	git notes add -m"a note" n3 &&
+	git rebase --onto n1 n2 &&
+	test "a note" = "$(git notes show HEAD)"
+'
+
+test_expect_success 'rebase -m can copy notes' '
+	git reset --hard n3 &&
+	git rebase -m --onto n1 n2 &&
+	test "a note" = "$(git notes show HEAD)"
+'
+
 test_done
diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh
index 4e3513709e..6668907ec5 100755
--- a/t/t3404-rebase-interactive.sh
+++ b/t/t3404-rebase-interactive.sh
@@ -22,12 +22,18 @@ set_fake_editor
 # | \
 # |   F - G - H                (branch1)
 # |     \
-#  \      I                    (branch2)
-#   \
-#     J - K - L - M            (no-conflict-branch)
+# |\      I                    (branch2)
+# | \
+# |   J - K - L - M            (no-conflict-branch)
+#  \
+#    N - O - P                 (no-ff-branch)
 #
 # where A, B, D and G all touch file1, and one, two, three, four all
 # touch file "conflict".
+#
+# WARNING: Modifications to the initial repository can change the SHA ID used
+# in the expect2 file for the 'stop on conflicting pick' test.
+
 
 test_expect_success 'setup' '
 	test_commit A file1 &&
@@ -50,6 +56,11 @@ test_expect_success 'setup' '
 	for n in J K L M
 	do
 		test_commit $n file$n
+	done &&
+	git checkout -b no-ff-branch A &&
+	for n in N O P
+	do
+		test_commit $n file$n
 	done
 '
 
@@ -113,7 +124,7 @@ cat > expect2 << EOF
 D
 =======
 G
->>>>>>> 51047de... G
+>>>>>>> 5d18e54... G
 EOF
 
 test_expect_success 'stop on conflicting pick' '
@@ -170,6 +181,12 @@ test_expect_success '-p handles "no changes" gracefully' '
 	test $HEAD = $(git rev-parse HEAD)
 '
 
+test_expect_failure 'exchange two commits with -p' '
+	FAKE_LINES="2 1" git rebase -i -p HEAD~2 &&
+	test H = $(git cat-file commit HEAD^ | sed -ne \$p) &&
+	test G = $(git cat-file commit HEAD | sed -ne \$p)
+'
+
 test_expect_success 'preserve merges with -p' '
 	git checkout -b to-be-preserved master^ &&
 	: > unrelated-file &&
@@ -553,4 +570,54 @@ test_expect_success 'reword' '
 	git show HEAD~2 | grep "C changed"
 '
 
+test_expect_success 'rebase -i can copy notes' '
+	git config notes.rewrite.rebase true &&
+	git config notes.rewriteRef "refs/notes/*" &&
+	test_commit n1 &&
+	test_commit n2 &&
+	test_commit n3 &&
+	git notes add -m"a note" n3 &&
+	git rebase --onto n1 n2 &&
+	test "a note" = "$(git notes show HEAD)"
+'
+
+cat >expect <<EOF
+an earlier note
+a note
+EOF
+
+test_expect_success 'rebase -i can copy notes over a fixup' '
+	git reset --hard n3 &&
+	git notes add -m"an earlier note" n2 &&
+	GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 fixup 2" git rebase -i n1 &&
+	git notes show > output &&
+	test_cmp expect output
+'
+
+test_expect_success 'rebase while detaching HEAD' '
+	git symbolic-ref HEAD &&
+	grandparent=$(git rev-parse HEAD~2) &&
+	test_tick &&
+	FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0 &&
+	test $grandparent = $(git rev-parse HEAD~2) &&
+	test_must_fail git symbolic-ref HEAD
+'
+
+test_tick # Ensure that the rebased commits get a different timestamp.
+test_expect_success 'always cherry-pick with --no-ff' '
+	git checkout no-ff-branch &&
+	git tag original-no-ff-branch &&
+	git rebase -i --no-ff A &&
+	touch empty &&
+	for p in 0 1 2
+	do
+		test ! $(git rev-parse HEAD~$p) = $(git rev-parse original-no-ff-branch~$p) &&
+		git diff HEAD~$p original-no-ff-branch~$p > out &&
+		test_cmp empty out
+	done &&
+	test $(git rev-parse HEAD~3) = $(git rev-parse original-no-ff-branch~3) &&
+	git diff HEAD~3 original-no-ff-branch~3 > out &&
+	test_cmp empty out
+'
+
 test_done
diff --git a/t/t3506-cherry-pick-ff.sh b/t/t3506-cherry-pick-ff.sh
new file mode 100755
index 0000000000..e17ae712b1
--- /dev/null
+++ b/t/t3506-cherry-pick-ff.sh
@@ -0,0 +1,98 @@
+#!/bin/sh
+
+test_description='test cherry-picking with --ff option'
+
+. ./test-lib.sh
+
+test_expect_success setup '
+	echo first > file1 &&
+	git add file1 &&
+	test_tick &&
+	git commit -m "first" &&
+	git tag first &&
+
+	git checkout -b other &&
+	echo second >> file1 &&
+	git add file1 &&
+	test_tick &&
+	git commit -m "second" &&
+	git tag second
+'
+
+test_expect_success 'cherry-pick using --ff fast forwards' '
+	git checkout master &&
+	git reset --hard first &&
+	test_tick &&
+	git cherry-pick --ff second &&
+	test "$(git rev-parse --verify HEAD)" = "$(git rev-parse --verify second)"
+'
+
+test_expect_success 'cherry-pick not using --ff does not fast forwards' '
+	git checkout master &&
+	git reset --hard first &&
+	test_tick &&
+	git cherry-pick second &&
+	test "$(git rev-parse --verify HEAD)" != "$(git rev-parse --verify second)"
+'
+
+#
+# We setup the following graph:
+#
+#	      B---C
+#	     /   /
+#	first---A
+#
+# (This has been taken from t3502-cherry-pick-merge.sh)
+#
+test_expect_success 'merge setup' '
+	git checkout master &&
+	git reset --hard first &&
+	echo new line >A &&
+	git add A &&
+	test_tick &&
+	git commit -m "add line to A" A &&
+	git tag A &&
+	git checkout -b side first &&
+	echo new line >B &&
+	git add B &&
+	test_tick &&
+	git commit -m "add line to B" B &&
+	git tag B &&
+	git checkout master &&
+	git merge side &&
+	git tag C &&
+	git checkout -b new A
+'
+
+test_expect_success 'cherry-pick a non-merge with --ff and -m should fail' '
+	git reset --hard A -- &&
+	test_must_fail git cherry-pick --ff -m 1 B &&
+	git diff --exit-code A --
+'
+
+test_expect_success 'cherry pick a merge with --ff but without -m should fail' '
+	git reset --hard A -- &&
+	test_must_fail git cherry-pick --ff C &&
+	git diff --exit-code A --
+'
+
+test_expect_success 'cherry pick with --ff a merge (1)' '
+	git reset --hard A -- &&
+	git cherry-pick --ff -m 1 C &&
+	git diff --exit-code C &&
+	test "$(git rev-parse --verify HEAD)" = "$(git rev-parse --verify C)"
+'
+
+test_expect_success 'cherry pick with --ff a merge (2)' '
+	git reset --hard B -- &&
+	git cherry-pick --ff -m 2 C &&
+	git diff --exit-code C &&
+	test "$(git rev-parse --verify HEAD)" = "$(git rev-parse --verify C)"
+'
+
+test_expect_success 'cherry pick a merge relative to nonexistent parent with --ff should fail' '
+	git reset --hard B -- &&
+	test_must_fail git cherry-pick --ff -m 3 C
+'
+
+test_done
diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh
new file mode 100755
index 0000000000..e25cf8039a
--- /dev/null
+++ b/t/t3507-cherry-pick-conflict.sh
@@ -0,0 +1,198 @@
+#!/bin/sh
+
+test_description='test cherry-pick and revert with conflicts
+
+  -
+  + picked: rewrites foo to c
+  + base: rewrites foo to b
+  + initial: writes foo as a, unrelated as unrelated
+
+'
+
+. ./test-lib.sh
+
+test_expect_success setup '
+
+	echo unrelated >unrelated &&
+	git add unrelated &&
+	test_commit initial foo a &&
+	test_commit base foo b &&
+	test_commit picked foo c &&
+	git config advice.detachedhead false
+
+'
+
+test_expect_success 'failed cherry-pick does not advance HEAD' '
+
+	git checkout -f initial^0 &&
+	git read-tree -u --reset HEAD &&
+	git clean -d -f -f -q -x &&
+
+	git update-index --refresh &&
+	git diff-index --exit-code HEAD &&
+
+	head=$(git rev-parse HEAD) &&
+	test_must_fail git cherry-pick picked &&
+	newhead=$(git rev-parse HEAD) &&
+
+	test "$head" = "$newhead"
+'
+
+test_expect_success 'failed cherry-pick produces dirty index' '
+
+	git checkout -f initial^0 &&
+	git read-tree -u --reset HEAD &&
+	git clean -d -f -f -q -x &&
+
+	git update-index --refresh &&
+	git diff-index --exit-code HEAD &&
+
+	test_must_fail git cherry-pick picked &&
+
+	test_must_fail git update-index --refresh -q &&
+	test_must_fail git diff-index --exit-code HEAD
+'
+
+test_expect_success 'failed cherry-pick registers participants in index' '
+
+	git read-tree -u --reset HEAD &&
+	git clean -d -f -f -q -x &&
+	{
+		git checkout base -- foo &&
+		git ls-files --stage foo &&
+		git checkout initial -- foo &&
+		git ls-files --stage foo &&
+		git checkout picked -- foo &&
+		git ls-files --stage foo
+	} > stages &&
+	sed "
+		1 s/ 0	/ 1	/
+		2 s/ 0	/ 2	/
+		3 s/ 0	/ 3	/
+	" < stages > expected &&
+	git checkout -f initial^0 &&
+
+	git update-index --refresh &&
+	git diff-index --exit-code HEAD &&
+
+	test_must_fail git cherry-pick picked &&
+	git ls-files --stage --unmerged > actual &&
+
+	test_cmp expected actual
+'
+
+test_expect_success 'failed cherry-pick describes conflict in work tree' '
+
+	git checkout -f initial^0 &&
+	git read-tree -u --reset HEAD &&
+	git clean -d -f -f -q -x &&
+	cat <<-EOF > expected &&
+	<<<<<<< HEAD
+	a
+	=======
+	c
+	>>>>>>> objid picked
+	EOF
+
+	git update-index --refresh &&
+	git diff-index --exit-code HEAD &&
+
+	test_must_fail git cherry-pick picked &&
+
+	sed "s/[a-f0-9]*\.\.\./objid/" foo > actual &&
+	test_cmp expected actual
+'
+
+test_expect_success 'diff3 -m style' '
+
+	git config merge.conflictstyle diff3 &&
+	git checkout -f initial^0 &&
+	git read-tree -u --reset HEAD &&
+	git clean -d -f -f -q -x &&
+	cat <<-EOF > expected &&
+	<<<<<<< HEAD
+	a
+	||||||| parent of objid picked
+	b
+	=======
+	c
+	>>>>>>> objid picked
+	EOF
+
+	git update-index --refresh &&
+	git diff-index --exit-code HEAD &&
+
+	test_must_fail git cherry-pick picked &&
+
+	sed "s/[a-f0-9]*\.\.\./objid/" foo > actual &&
+	test_cmp expected actual
+'
+
+test_expect_success 'revert also handles conflicts sanely' '
+
+	git config --unset merge.conflictstyle &&
+	git read-tree -u --reset HEAD &&
+	git clean -d -f -f -q -x &&
+	cat <<-EOF > expected &&
+	<<<<<<< HEAD
+	a
+	=======
+	b
+	>>>>>>> parent of objid picked
+	EOF
+	{
+		git checkout picked -- foo &&
+		git ls-files --stage foo &&
+		git checkout initial -- foo &&
+		git ls-files --stage foo &&
+		git checkout base -- foo &&
+		git ls-files --stage foo
+	} > stages &&
+	sed "
+		1 s/ 0	/ 1	/
+		2 s/ 0	/ 2	/
+		3 s/ 0	/ 3	/
+	" < stages > expected-stages &&
+	git checkout -f initial^0 &&
+
+	git update-index --refresh &&
+	git diff-index --exit-code HEAD &&
+
+	head=$(git rev-parse HEAD) &&
+	test_must_fail git revert picked &&
+	newhead=$(git rev-parse HEAD) &&
+	git ls-files --stage --unmerged > actual-stages &&
+
+	test "$head" = "$newhead" &&
+	test_must_fail git update-index --refresh -q &&
+	test_must_fail git diff-index --exit-code HEAD &&
+	test_cmp expected-stages actual-stages &&
+	sed "s/[a-f0-9]*\.\.\./objid/" foo > actual &&
+	test_cmp expected actual
+'
+
+test_expect_success 'revert conflict, diff3 -m style' '
+	git config merge.conflictstyle diff3 &&
+	git checkout -f initial^0 &&
+	git read-tree -u --reset HEAD &&
+	git clean -d -f -f -q -x &&
+	cat <<-EOF > expected &&
+	<<<<<<< HEAD
+	a
+	||||||| objid picked
+	c
+	=======
+	b
+	>>>>>>> parent of objid picked
+	EOF
+
+	git update-index --refresh &&
+	git diff-index --exit-code HEAD &&
+
+	test_must_fail git revert picked &&
+
+	sed "s/[a-f0-9]*\.\.\./objid/" foo > actual &&
+	test_cmp expected actual
+'
+
+test_done
diff --git a/t/t3800-mktag.sh b/t/t3800-mktag.sh
index 6fb027ba57..8eb47942e2 100755
--- a/t/t3800-mktag.sh
+++ b/t/t3800-mktag.sh
@@ -22,10 +22,12 @@ check_verify_failure () {
 ###########################################################
 # first create a commit, so we have a valid object/type
 # for the tag.
-echo Hello >A
-git update-index --add A
-git commit -m "Initial commit"
-head=$(git rev-parse --verify HEAD)
+test_expect_success 'setup' '
+	echo Hello >A &&
+	git update-index --add A &&
+	git commit -m "Initial commit" &&
+	head=$(git rev-parse --verify HEAD)
+'
 
 ############################################################
 #  1. length check
diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh
index 476e5ec038..8fe14ccc54 100755
--- a/t/t3903-stash.sh
+++ b/t/t3903-stash.sh
@@ -228,4 +228,154 @@ test_expect_success 'stash --invalid-option' '
 	test bar,bar2 = $(cat file),$(cat file2)
 '
 
+test_expect_success 'stash an added file' '
+	git reset --hard &&
+	echo new >file3 &&
+	git add file3 &&
+	git stash save "added file" &&
+	! test -r file3 &&
+	git stash apply &&
+	test new = "$(cat file3)"
+'
+
+test_expect_success 'stash rm then recreate' '
+	git reset --hard &&
+	git rm file &&
+	echo bar7 >file &&
+	git stash save "rm then recreate" &&
+	test bar = "$(cat file)" &&
+	git stash apply &&
+	test bar7 = "$(cat file)"
+'
+
+test_expect_success 'stash rm and ignore' '
+	git reset --hard &&
+	git rm file &&
+	echo file >.gitignore &&
+	git stash save "rm and ignore" &&
+	test bar = "$(cat file)" &&
+	test file = "$(cat .gitignore)"
+	git stash apply &&
+	! test -r file &&
+	test file = "$(cat .gitignore)"
+'
+
+test_expect_success 'stash rm and ignore (stage .gitignore)' '
+	git reset --hard &&
+	git rm file &&
+	echo file >.gitignore &&
+	git add .gitignore &&
+	git stash save "rm and ignore (stage .gitignore)" &&
+	test bar = "$(cat file)" &&
+	! test -r .gitignore
+	git stash apply &&
+	! test -r file &&
+	test file = "$(cat .gitignore)"
+'
+
+test_expect_success SYMLINKS 'stash file to symlink' '
+	git reset --hard &&
+	rm file &&
+	ln -s file2 file &&
+	git stash save "file to symlink" &&
+	test -f file &&
+	test bar = "$(cat file)" &&
+	git stash apply &&
+	case "$(ls -l file)" in *" file -> file2") :;; *) false;; esac
+'
+
+test_expect_success SYMLINKS 'stash file to symlink (stage rm)' '
+	git reset --hard &&
+	git rm file &&
+	ln -s file2 file &&
+	git stash save "file to symlink (stage rm)" &&
+	test -f file &&
+	test bar = "$(cat file)" &&
+	git stash apply &&
+	case "$(ls -l file)" in *" file -> file2") :;; *) false;; esac
+'
+
+test_expect_success SYMLINKS 'stash file to symlink (full stage)' '
+	git reset --hard &&
+	rm file &&
+	ln -s file2 file &&
+	git add file &&
+	git stash save "file to symlink (full stage)" &&
+	test -f file &&
+	test bar = "$(cat file)" &&
+	git stash apply &&
+	case "$(ls -l file)" in *" file -> file2") :;; *) false;; esac
+'
+
+# This test creates a commit with a symlink used for the following tests
+
+test_expect_success SYMLINKS 'stash symlink to file' '
+	git reset --hard &&
+	ln -s file filelink &&
+	git add filelink &&
+	git commit -m "Add symlink" &&
+	rm filelink &&
+	cp file filelink &&
+	git stash save "symlink to file" &&
+	test -h filelink &&
+	case "$(ls -l filelink)" in *" filelink -> file") :;; *) false;; esac &&
+	git stash apply &&
+	! test -h filelink &&
+	test bar = "$(cat file)"
+'
+
+test_expect_success SYMLINKS 'stash symlink to file (stage rm)' '
+	git reset --hard &&
+	git rm filelink &&
+	cp file filelink &&
+	git stash save "symlink to file (stage rm)" &&
+	test -h filelink &&
+	case "$(ls -l filelink)" in *" filelink -> file") :;; *) false;; esac &&
+	git stash apply &&
+	! test -h filelink &&
+	test bar = "$(cat file)"
+'
+
+test_expect_success SYMLINKS 'stash symlink to file (full stage)' '
+	git reset --hard &&
+	rm filelink &&
+	cp file filelink &&
+	git add filelink &&
+	git stash save "symlink to file (full stage)" &&
+	test -h filelink &&
+	case "$(ls -l filelink)" in *" filelink -> file") :;; *) false;; esac &&
+	git stash apply &&
+	! test -h filelink &&
+	test bar = "$(cat file)"
+'
+
+test_expect_failure 'stash directory to file' '
+	git reset --hard &&
+	mkdir dir &&
+	echo foo >dir/file &&
+	git add dir/file &&
+	git commit -m "Add file in dir" &&
+	rm -fr dir &&
+	echo bar >dir &&
+	git stash save "directory to file" &&
+	test -d dir &&
+	test foo = "$(cat dir/file)" &&
+	test_must_fail git stash apply &&
+	test bar = "$(cat dir)" &&
+	git reset --soft HEAD^
+'
+
+test_expect_failure 'stash file to directory' '
+	git reset --hard &&
+	rm file &&
+	mkdir file &&
+	echo foo >file/file &&
+	git stash save "file to directory" &&
+	test -f file &&
+	test bar = "$(cat file)" &&
+	git stash apply &&
+	test -f file/file &&
+	test foo = "$(cat file/file)"
+'
+
 test_done
diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh
index 8e3694ed5b..dae6358516 100755
--- a/t/t4013-diff-various.sh
+++ b/t/t4013-diff-various.sh
@@ -204,6 +204,9 @@ log --root --patch-with-stat --summary master
 log --root -c --patch-with-stat --summary master
 # improved by Timo's patch
 log --root --cc --patch-with-stat --summary master
+log -p --first-parent master
+log -m -p --first-parent master
+log -m -p master
 log -SF master
 log -SF -p master
 log --decorate --all
@@ -235,6 +238,9 @@ show initial
 show --root initial
 show side
 show master
+show -c master
+show -m master
+show --first-parent master
 show --stat side
 show --stat --summary side
 show --patch-with-stat side
diff --git a/t/t4013/diff.log_-m_-p_--first-parent_master b/t/t4013/diff.log_-m_-p_--first-parent_master
new file mode 100644
index 0000000000..7a0073f529
--- /dev/null
+++ b/t/t4013/diff.log_-m_-p_--first-parent_master
@@ -0,0 +1,100 @@
+$ git log -m -p --first-parent master
+commit 59d314ad6f356dd08601a4cd5e530381da3e3c64
+Merge: 9a6d494 c7a2ab9
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:04:00 2006 +0000
+
+    Merge branch 'side'
+
+diff --git a/dir/sub b/dir/sub
+index cead32e..992913c 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -4,3 +4,5 @@ C
+ D
+ E
+ F
++1
++2
+diff --git a/file0 b/file0
+index b414108..10a8a9f 100644
+--- a/file0
++++ b/file0
+@@ -4,3 +4,6 @@
+ 4
+ 5
+ 6
++A
++B
++C
+
+commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:02:00 2006 +0000
+
+    Third
+
+diff --git a/dir/sub b/dir/sub
+index 8422d40..cead32e 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -2,3 +2,5 @@ A
+ B
+ C
+ D
++E
++F
+diff --git a/file1 b/file1
+new file mode 100644
+index 0000000..b1e6722
+--- /dev/null
++++ b/file1
+@@ -0,0 +1,3 @@
++A
++B
++C
+
+commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:01:00 2006 +0000
+
+    Second
+    
+    This is the second commit.
+
+diff --git a/dir/sub b/dir/sub
+index 35d242b..8422d40 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -1,2 +1,4 @@
+ A
+ B
++C
++D
+diff --git a/file0 b/file0
+index 01e79c3..b414108 100644
+--- a/file0
++++ b/file0
+@@ -1,3 +1,6 @@
+ 1
+ 2
+ 3
++4
++5
++6
+diff --git a/file2 b/file2
+deleted file mode 100644
+index 01e79c3..0000000
+--- a/file2
++++ /dev/null
+@@ -1,3 +0,0 @@
+-1
+-2
+-3
+
+commit 444ac553ac7612cc88969031b02b3767fb8a353a
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:00:00 2006 +0000
+
+    Initial
+$
diff --git a/t/t4013/diff.log_-m_-p_master b/t/t4013/diff.log_-m_-p_master
new file mode 100644
index 0000000000..9ca62a01ed
--- /dev/null
+++ b/t/t4013/diff.log_-m_-p_master
@@ -0,0 +1,200 @@
+$ git log -m -p master
+commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (from 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0)
+Merge: 9a6d494 c7a2ab9
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:04:00 2006 +0000
+
+    Merge branch 'side'
+
+diff --git a/dir/sub b/dir/sub
+index cead32e..992913c 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -4,3 +4,5 @@ C
+ D
+ E
+ F
++1
++2
+diff --git a/file0 b/file0
+index b414108..10a8a9f 100644
+--- a/file0
++++ b/file0
+@@ -4,3 +4,6 @@
+ 4
+ 5
+ 6
++A
++B
++C
+
+commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (from c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a)
+Merge: 9a6d494 c7a2ab9
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:04:00 2006 +0000
+
+    Merge branch 'side'
+
+diff --git a/dir/sub b/dir/sub
+index 7289e35..992913c 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -1,4 +1,8 @@
+ A
+ B
++C
++D
++E
++F
+ 1
+ 2
+diff --git a/file0 b/file0
+index f4615da..10a8a9f 100644
+--- a/file0
++++ b/file0
+@@ -1,6 +1,9 @@
+ 1
+ 2
+ 3
++4
++5
++6
+ A
+ B
+ C
+diff --git a/file1 b/file1
+new file mode 100644
+index 0000000..b1e6722
+--- /dev/null
++++ b/file1
+@@ -0,0 +1,3 @@
++A
++B
++C
+diff --git a/file2 b/file2
+deleted file mode 100644
+index 01e79c3..0000000
+--- a/file2
++++ /dev/null
+@@ -1,3 +0,0 @@
+-1
+-2
+-3
+diff --git a/file3 b/file3
+deleted file mode 100644
+index 7289e35..0000000
+--- a/file3
++++ /dev/null
+@@ -1,4 +0,0 @@
+-A
+-B
+-1
+-2
+
+commit c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:03:00 2006 +0000
+
+    Side
+
+diff --git a/dir/sub b/dir/sub
+index 35d242b..7289e35 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -1,2 +1,4 @@
+ A
+ B
++1
++2
+diff --git a/file0 b/file0
+index 01e79c3..f4615da 100644
+--- a/file0
++++ b/file0
+@@ -1,3 +1,6 @@
+ 1
+ 2
+ 3
++A
++B
++C
+diff --git a/file3 b/file3
+new file mode 100644
+index 0000000..7289e35
+--- /dev/null
++++ b/file3
+@@ -0,0 +1,4 @@
++A
++B
++1
++2
+
+commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:02:00 2006 +0000
+
+    Third
+
+diff --git a/dir/sub b/dir/sub
+index 8422d40..cead32e 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -2,3 +2,5 @@ A
+ B
+ C
+ D
++E
++F
+diff --git a/file1 b/file1
+new file mode 100644
+index 0000000..b1e6722
+--- /dev/null
++++ b/file1
+@@ -0,0 +1,3 @@
++A
++B
++C
+
+commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:01:00 2006 +0000
+
+    Second
+    
+    This is the second commit.
+
+diff --git a/dir/sub b/dir/sub
+index 35d242b..8422d40 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -1,2 +1,4 @@
+ A
+ B
++C
++D
+diff --git a/file0 b/file0
+index 01e79c3..b414108 100644
+--- a/file0
++++ b/file0
+@@ -1,3 +1,6 @@
+ 1
+ 2
+ 3
++4
++5
++6
+diff --git a/file2 b/file2
+deleted file mode 100644
+index 01e79c3..0000000
+--- a/file2
++++ /dev/null
+@@ -1,3 +0,0 @@
+-1
+-2
+-3
+
+commit 444ac553ac7612cc88969031b02b3767fb8a353a
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:00:00 2006 +0000
+
+    Initial
+$
diff --git a/t/t4013/diff.log_-p_--first-parent_master b/t/t4013/diff.log_-p_--first-parent_master
new file mode 100644
index 0000000000..3fc896d424
--- /dev/null
+++ b/t/t4013/diff.log_-p_--first-parent_master
@@ -0,0 +1,78 @@
+$ git log -p --first-parent master
+commit 59d314ad6f356dd08601a4cd5e530381da3e3c64
+Merge: 9a6d494 c7a2ab9
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:04:00 2006 +0000
+
+    Merge branch 'side'
+
+commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:02:00 2006 +0000
+
+    Third
+
+diff --git a/dir/sub b/dir/sub
+index 8422d40..cead32e 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -2,3 +2,5 @@ A
+ B
+ C
+ D
++E
++F
+diff --git a/file1 b/file1
+new file mode 100644
+index 0000000..b1e6722
+--- /dev/null
++++ b/file1
+@@ -0,0 +1,3 @@
++A
++B
++C
+
+commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:01:00 2006 +0000
+
+    Second
+    
+    This is the second commit.
+
+diff --git a/dir/sub b/dir/sub
+index 35d242b..8422d40 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -1,2 +1,4 @@
+ A
+ B
++C
++D
+diff --git a/file0 b/file0
+index 01e79c3..b414108 100644
+--- a/file0
++++ b/file0
+@@ -1,3 +1,6 @@
+ 1
+ 2
+ 3
++4
++5
++6
+diff --git a/file2 b/file2
+deleted file mode 100644
+index 01e79c3..0000000
+--- a/file2
++++ /dev/null
+@@ -1,3 +0,0 @@
+-1
+-2
+-3
+
+commit 444ac553ac7612cc88969031b02b3767fb8a353a
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:00:00 2006 +0000
+
+    Initial
+$
diff --git a/t/t4013/diff.show_--first-parent_master b/t/t4013/diff.show_--first-parent_master
new file mode 100644
index 0000000000..3dcbe473a0
--- /dev/null
+++ b/t/t4013/diff.show_--first-parent_master
@@ -0,0 +1,30 @@
+$ git show --first-parent master
+commit 59d314ad6f356dd08601a4cd5e530381da3e3c64
+Merge: 9a6d494 c7a2ab9
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:04:00 2006 +0000
+
+    Merge branch 'side'
+
+diff --git a/dir/sub b/dir/sub
+index cead32e..992913c 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -4,3 +4,5 @@ C
+ D
+ E
+ F
++1
++2
+diff --git a/file0 b/file0
+index b414108..10a8a9f 100644
+--- a/file0
++++ b/file0
+@@ -4,3 +4,6 @@
+ 4
+ 5
+ 6
++A
++B
++C
+$
diff --git a/t/t4013/diff.show_-c_master b/t/t4013/diff.show_-c_master
new file mode 100644
index 0000000000..81aba8da96
--- /dev/null
+++ b/t/t4013/diff.show_-c_master
@@ -0,0 +1,36 @@
+$ git show -c master
+commit 59d314ad6f356dd08601a4cd5e530381da3e3c64
+Merge: 9a6d494 c7a2ab9
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:04:00 2006 +0000
+
+    Merge branch 'side'
+
+diff --combined dir/sub
+index cead32e,7289e35..992913c
+--- a/dir/sub
++++ b/dir/sub
+@@@ -1,6 -1,4 +1,8 @@@
+  A
+  B
+ +C
+ +D
+ +E
+ +F
++ 1
++ 2
+diff --combined file0
+index b414108,f4615da..10a8a9f
+--- a/file0
++++ b/file0
+@@@ -1,6 -1,6 +1,9 @@@
+  1
+  2
+  3
+ +4
+ +5
+ +6
++ A
++ B
++ C
+$
diff --git a/t/t4013/diff.show_-m_master b/t/t4013/diff.show_-m_master
new file mode 100644
index 0000000000..4ea2ee453d
--- /dev/null
+++ b/t/t4013/diff.show_-m_master
@@ -0,0 +1,93 @@
+$ git show -m master
+commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (from 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0)
+Merge: 9a6d494 c7a2ab9
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:04:00 2006 +0000
+
+    Merge branch 'side'
+
+diff --git a/dir/sub b/dir/sub
+index cead32e..992913c 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -4,3 +4,5 @@ C
+ D
+ E
+ F
++1
++2
+diff --git a/file0 b/file0
+index b414108..10a8a9f 100644
+--- a/file0
++++ b/file0
+@@ -4,3 +4,6 @@
+ 4
+ 5
+ 6
++A
++B
++C
+
+commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (from c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a)
+Merge: 9a6d494 c7a2ab9
+Author: A U Thor <author@example.com>
+Date:   Mon Jun 26 00:04:00 2006 +0000
+
+    Merge branch 'side'
+
+diff --git a/dir/sub b/dir/sub
+index 7289e35..992913c 100644
+--- a/dir/sub
++++ b/dir/sub
+@@ -1,4 +1,8 @@
+ A
+ B
++C
++D
++E
++F
+ 1
+ 2
+diff --git a/file0 b/file0
+index f4615da..10a8a9f 100644
+--- a/file0
++++ b/file0
+@@ -1,6 +1,9 @@
+ 1
+ 2
+ 3
++4
++5
++6
+ A
+ B
+ C
+diff --git a/file1 b/file1
+new file mode 100644
+index 0000000..b1e6722
+--- /dev/null
++++ b/file1
+@@ -0,0 +1,3 @@
++A
++B
++C
+diff --git a/file2 b/file2
+deleted file mode 100644
+index 01e79c3..0000000
+--- a/file2
++++ /dev/null
+@@ -1,3 +0,0 @@
+-1
+-2
+-3
+diff --git a/file3 b/file3
+deleted file mode 100644
+index 7289e35..0000000
+--- a/file3
++++ /dev/null
+@@ -1,4 +0,0 @@
+-A
+-B
+-1
+-2
+$
diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh
index 843ef7f88c..d21c37f3a2 100755
--- a/t/t4014-format-patch.sh
+++ b/t/t4014-format-patch.sh
@@ -143,6 +143,58 @@ test_expect_success 'configuration headers and command line headers' '
 	grep "^ *S. E. Cipient <scipient@example.com>\$" patch7
 '
 
+test_expect_success 'command line To: header' '
+
+	git config --unset-all format.headers &&
+	git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 &&
+	grep "^To: R. E. Cipient <rcipient@example.com>\$" patch8
+'
+
+test_expect_success 'configuration To: header' '
+
+	git config format.to "R. E. Cipient <rcipient@example.com>" &&
+	git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 &&
+	grep "^To: R. E. Cipient <rcipient@example.com>\$" patch9
+'
+
+test_expect_success '--no-to overrides config.to' '
+
+	git config --replace-all format.to \
+		"R. E. Cipient <rcipient@example.com>" &&
+	git format-patch --no-to --stdout master..side |
+	sed -e "/^\$/q" >patch10 &&
+	! grep "^To: R. E. Cipient <rcipient@example.com>\$" patch10
+'
+
+test_expect_success '--no-to and --to replaces config.to' '
+
+	git config --replace-all format.to \
+		"Someone <someone@out.there>" &&
+	git format-patch --no-to --to="Someone Else <else@out.there>" \
+		--stdout master..side |
+	sed -e "/^\$/q" >patch11 &&
+	! grep "^To: Someone <someone@out.there>\$" patch11 &&
+	grep "^To: Someone Else <else@out.there>\$" patch11
+'
+
+test_expect_success '--no-cc overrides config.cc' '
+
+	git config --replace-all format.cc \
+		"C. E. Cipient <rcipient@example.com>" &&
+	git format-patch --no-cc --stdout master..side |
+	sed -e "/^\$/q" >patch12 &&
+	! grep "^Cc: C. E. Cipient <rcipient@example.com>\$" patch12
+'
+
+test_expect_success '--no-add-headers overrides config.headers' '
+
+	git config --replace-all format.headers \
+		"Header1: B. E. Cipient <rcipient@example.com>" &&
+	git format-patch --no-add-headers --stdout master..side |
+	sed -e "/^\$/q" >patch13 &&
+	! grep "^Header1: B. E. Cipient <rcipient@example.com>\$" patch13
+'
+
 test_expect_success 'multiple files' '
 
 	rm -rf patches/ &&
diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh
index 90f3342373..7e78851a11 100755
--- a/t/t4015-diff-whitespace.sh
+++ b/t/t4015-diff-whitespace.sh
@@ -396,6 +396,43 @@ test_expect_success 'whitespace-only changes not reported' '
 	test_cmp expect actual
 '
 
+cat <<EOF >expect
+diff --git a/x b/z
+similarity index NUM%
+rename from x
+rename to z
+index 380c32a..a97b785 100644
+EOF
+test_expect_success 'whitespace-only changes reported across renames' '
+	git reset --hard &&
+	for i in 1 2 3 4 5 6 7 8 9; do echo "$i$i$i$i$i$i"; done >x &&
+	git add x &&
+	git commit -m "base" &&
+	sed -e "5s/^/ /" x >z &&
+	git rm x &&
+	git add z &&
+	git diff -w -M --cached |
+	sed -e "/^similarity index /s/[0-9][0-9]*/NUM/" >actual &&
+	test_cmp expect actual
+'
+
+cat >expected <<\EOF
+diff --git a/empty b/void
+similarity index 100%
+rename from empty
+rename to void
+EOF
+
+test_expect_success 'rename empty' '
+	git reset --hard &&
+	>empty &&
+	git add empty &&
+	git commit -m empty &&
+	git mv empty void &&
+	git diff -w --cached -M >current &&
+	test_cmp expected current
+'
+
 test_expect_success 'combined diff with autocrlf conversion' '
 
 	git reset --hard &&
diff --git a/t/t4041-diff-submodule.sh b/t/t4041-diff-submodule.sh
index 464305405a..019acb926d 100755
--- a/t/t4041-diff-submodule.sh
+++ b/t/t4041-diff-submodule.sh
@@ -201,7 +201,7 @@ test_expect_success 'submodule contains untracked content' "
 	echo new > sm1/new-file &&
 	git diff-index -p --submodule=log HEAD >actual &&
 	diff actual - <<-EOF
-Submodule sm1 $head6..$head6-dirty:
+Submodule sm1 contains untracked content
 EOF
 "
 
@@ -209,7 +209,8 @@ test_expect_success 'submodule contains untracked and modifed content' "
 	echo new > sm1/foo6 &&
 	git diff-index -p --submodule=log HEAD >actual &&
 	diff actual - <<-EOF
-Submodule sm1 $head6..$head6-dirty:
+Submodule sm1 contains untracked content
+Submodule sm1 contains modified content
 EOF
 "
 
@@ -217,7 +218,7 @@ test_expect_success 'submodule contains modifed content' "
 	rm -f sm1/new-file &&
 	git diff-index -p --submodule=log HEAD >actual &&
 	diff actual - <<-EOF
-Submodule sm1 $head6..$head6-dirty:
+Submodule sm1 contains modified content
 EOF
 "
 
@@ -235,7 +236,8 @@ test_expect_success 'modified submodule contains untracked content' "
 	echo new > sm1/new-file &&
 	git diff-index -p --submodule=log HEAD >actual &&
 	diff actual - <<-EOF
-Submodule sm1 $head6..$head8-dirty:
+Submodule sm1 contains untracked content
+Submodule sm1 $head6..$head8:
   > change
 EOF
 "
@@ -244,7 +246,9 @@ test_expect_success 'modified submodule contains untracked and modifed content'
 	echo modification >> sm1/foo6 &&
 	git diff-index -p --submodule=log HEAD >actual &&
 	diff actual - <<-EOF
-Submodule sm1 $head6..$head8-dirty:
+Submodule sm1 contains untracked content
+Submodule sm1 contains modified content
+Submodule sm1 $head6..$head8:
   > change
 EOF
 "
@@ -253,7 +257,8 @@ test_expect_success 'modified submodule contains modifed content' "
 	rm -f sm1/new-file &&
 	git diff-index -p --submodule=log HEAD >actual &&
 	diff actual - <<-EOF
-Submodule sm1 $head6..$head8-dirty:
+Submodule sm1 contains modified content
+Submodule sm1 $head6..$head8:
   > change
 EOF
 "
@@ -324,4 +329,19 @@ index 0000000..$head7
 EOF
 "
 
+test_expect_success 'setup .git file for sm2' '
+	(cd sm2 &&
+	 REAL="$(pwd)/../.real" &&
+	 mv .git "$REAL"
+	 echo "gitdir: $REAL" >.git)
+'
+
+test_expect_success 'diff --submodule with .git file' '
+	git diff --submodule HEAD^ >actual &&
+	diff actual - <<-EOF
+Submodule sm1 $head6...0000000 (submodule deleted)
+Submodule sm2 0000000...$head7 (new submodule)
+EOF
+'
+
 test_done
diff --git a/t/t4043-diff-rename-binary.sh b/t/t4043-diff-rename-binary.sh
new file mode 100755
index 0000000000..06012811a1
--- /dev/null
+++ b/t/t4043-diff-rename-binary.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# Copyright (c) 2010 Jakub Narebski, Christian Couder
+#
+
+test_description='Move a binary file'
+
+. ./test-lib.sh
+
+
+test_expect_success 'prepare repository' '
+	git init &&
+	echo foo > foo &&
+	echo "barQ" | q_to_nul > bar &&
+	git add . &&
+	git commit -m "Initial commit"
+'
+
+test_expect_success 'move the files into a "sub" directory' '
+	mkdir sub &&
+	git mv bar foo sub/ &&
+	git commit -m "Moved to sub/"
+'
+
+cat > expected <<\EOF
+ bar => sub/bar |  Bin 5 -> 5 bytes
+ foo => sub/foo |    0
+ 2 files changed, 0 insertions(+), 0 deletions(-)
+
+diff --git a/bar b/sub/bar
+similarity index 100%
+rename from bar
+rename to sub/bar
+diff --git a/foo b/sub/foo
+similarity index 100%
+rename from foo
+rename to sub/foo
+EOF
+
+test_expect_success 'git show -C -C report renames' '
+	git show -C -C --raw --binary --stat | tail -n 12 > current &&
+	test_cmp expected current
+'
+
+test_done
diff --git a/t/t4103-apply-binary.sh b/t/t4103-apply-binary.sh
index ad4cc1a757..9692f16f35 100755
--- a/t/t4103-apply-binary.sh
+++ b/t/t4103-apply-binary.sh
@@ -20,23 +20,25 @@ EOF
 cat file1 >file2
 cat file1 >file4
 
-git update-index --add --remove file1 file2 file4
-git commit -m 'Initial Version' 2>/dev/null
-
-git checkout -b binary
-perl -pe 'y/x/\000/' <file1 >file3
-cat file3 >file4
-git add file2
-perl -pe 'y/\000/v/' <file3 >file1
-rm -f file2
-git update-index --add --remove file1 file2 file3 file4
-git commit -m 'Second Version'
-
-git diff-tree -p master binary >B.diff
-git diff-tree -p -C master binary >C.diff
-
-git diff-tree -p --binary master binary >BF.diff
-git diff-tree -p --binary -C master binary >CF.diff
+test_expect_success 'setup' "
+	git update-index --add --remove file1 file2 file4 &&
+	git commit -m 'Initial Version' 2>/dev/null &&
+
+	git checkout -b binary &&
+	perl -pe 'y/x/\000/' <file1 >file3 &&
+	cat file3 >file4 &&
+	git add file2 &&
+	perl -pe 'y/\000/v/' <file3 >file1 &&
+	rm -f file2 &&
+	git update-index --add --remove file1 file2 file3 file4 &&
+	git commit -m 'Second Version' &&
+
+	git diff-tree -p master binary >B.diff &&
+	git diff-tree -p -C master binary >C.diff &&
+
+	git diff-tree -p --binary master binary >BF.diff &&
+	git diff-tree -p --binary -C master binary >CF.diff
+"
 
 test_expect_success 'stat binary diff -- should not fail.' \
 	'git checkout master
diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh
index fb9ad247bf..451d75e3fb 100755
--- a/t/t4124-apply-ws-rule.sh
+++ b/t/t4124-apply-ws-rule.sh
@@ -325,6 +325,18 @@ test_expect_success 'two missing blank lines at end with --whitespace=fix' '
 	test_cmp one expect
 '
 
+test_expect_success 'missing blank line at end, insert before end, --whitespace=fix' '
+	{ echo a; echo; } >one &&
+	git add one &&
+	{ echo b; echo a; echo; } >one &&
+	cp one expect &&
+	git diff -- one >patch &&
+	echo a >one &&
+	test_must_fail git apply patch &&
+	git apply --whitespace=fix patch &&
+	test_cmp one expect
+'
+
 test_expect_success 'shrink file with tons of missing blanks at end of file' '
 	{ echo a; echo b; echo c; } >one &&
 	cp one no-blank-lines &&
diff --git a/t/t4134-apply-submodule.sh b/t/t4134-apply-submodule.sh
new file mode 100755
index 0000000000..1b82f93cff
--- /dev/null
+++ b/t/t4134-apply-submodule.sh
@@ -0,0 +1,38 @@
+#!/bin/sh
+#
+# Copyright (c) 2010 Peter Collingbourne
+#
+
+test_description='git apply submodule tests'
+
+. ./test-lib.sh
+
+test_expect_success setup '
+	cat > create-sm.patch <<EOF
+diff --git a/dir/sm b/dir/sm
+new file mode 160000
+index 0000000..0123456
+--- /dev/null
++++ b/dir/sm
+@@ -0,0 +1 @@
++Subproject commit 0123456789abcdef0123456789abcdef01234567
+EOF
+	cat > remove-sm.patch <<EOF
+diff --git a/dir/sm b/dir/sm
+deleted file mode 160000
+index 0123456..0000000
+--- a/dir/sm
++++ /dev/null
+@@ -1 +0,0 @@
+-Subproject commit 0123456789abcdef0123456789abcdef01234567
+EOF
+'
+
+test_expect_success 'removing a submodule also removes all leading subdirectories' '
+	git apply --index create-sm.patch &&
+	test -d dir/sm &&
+	git apply --index remove-sm.patch &&
+	test \! -d dir
+'
+
+test_done
diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh
index bb402c3780..70856d07ed 100755
--- a/t/t4200-rerere.sh
+++ b/t/t4200-rerere.sh
@@ -8,40 +8,42 @@ test_description='git rerere
 
 . ./test-lib.sh
 
-cat > a1 << EOF
-Some title
-==========
-Whether 'tis nobler in the mind to suffer
-The slings and arrows of outrageous fortune,
-Or to take arms against a sea of troubles,
-And by opposing end them? To die: to sleep;
-No more; and by a sleep to say we end
-The heart-ache and the thousand natural shocks
-That flesh is heir to, 'tis a consummation
-Devoutly to be wish'd.
-EOF
-
-git add a1
-git commit -q -a -m initial
-
-git checkout -b first
-cat >> a1 << EOF
-Some title
-==========
-To die, to sleep;
-To sleep: perchance to dream: ay, there's the rub;
-For in that sleep of death what dreams may come
-When we have shuffled off this mortal coil,
-Must give us pause: there's the respect
-That makes calamity of so long life;
-EOF
-git commit -q -a -m first
-
-git checkout -b second master
-git show first:a1 |
-sed -e 's/To die, t/To die! T/' -e 's/Some title/Some Title/' > a1
-echo "* END *" >>a1
-git commit -q -a -m second
+test_expect_success 'setup' "
+	cat > a1 <<- EOF &&
+	Some title
+	==========
+	Whether 'tis nobler in the mind to suffer
+	The slings and arrows of outrageous fortune,
+	Or to take arms against a sea of troubles,
+	And by opposing end them? To die: to sleep;
+	No more; and by a sleep to say we end
+	The heart-ache and the thousand natural shocks
+	That flesh is heir to, 'tis a consummation
+	Devoutly to be wish'd.
+	EOF
+
+	git add a1 &&
+	git commit -q -a -m initial &&
+
+	git checkout -b first &&
+	cat >> a1 <<- EOF &&
+	Some title
+	==========
+	To die, to sleep;
+	To sleep: perchance to dream: ay, there's the rub;
+	For in that sleep of death what dreams may come
+	When we have shuffled off this mortal coil,
+	Must give us pause: there's the respect
+	That makes calamity of so long life;
+	EOF
+	git commit -q -a -m first &&
+
+	git checkout -b second master &&
+	git show first:a1 |
+	sed -e 's/To die, t/To die! T/' -e 's/Some title/Some Title/' > a1 &&
+	echo '* END *' >>a1 &&
+	git commit -q -a -m second
+"
 
 test_expect_success 'nothing recorded without rerere' '
 	(rm -rf .git/rr-cache; git config rerere.enabled false) &&
diff --git a/t/t4253-am-keep-cr-dos.sh b/t/t4253-am-keep-cr-dos.sh
new file mode 100755
index 0000000000..735e55d77c
--- /dev/null
+++ b/t/t4253-am-keep-cr-dos.sh
@@ -0,0 +1,96 @@
+#!/bin/sh
+#
+# Copyright (c) 2010 Stefan-W. Hahn
+#
+
+test_description='git-am mbox with dos line ending.
+
+'
+. ./test-lib.sh
+
+# Three patches which will be added as files with dos line ending.
+
+cat >file1 <<\EOF
+line 1
+EOF
+
+cat >file1a <<\EOF
+line 1
+line 4
+EOF
+
+cat >file2 <<\EOF
+line 1
+line 2
+EOF
+
+cat >file3 <<\EOF
+line 1
+line 2
+line 3
+EOF
+
+test_expect_success 'setup repository with dos files' '
+	append_cr <file1 >file &&
+	git add file &&
+	git commit -m Initial &&
+	git tag initial &&
+	append_cr <file2 >file &&
+	git commit -a -m Second &&
+	append_cr <file3 >file &&
+	git commit -a -m Third
+'
+
+test_expect_success 'am with dos files without --keep-cr' '
+	git checkout -b dosfiles initial &&
+	git format-patch -k initial..master &&
+	test_must_fail git am -k -3 000*.patch &&
+	git am --abort &&
+	rm -rf .git/rebase-apply 000*.patch
+'
+
+test_expect_success 'am with dos files with --keep-cr' '
+	git checkout -b dosfiles-keep-cr initial &&
+	git format-patch -k --stdout initial..master | git am --keep-cr -k -3 &&
+	git diff --exit-code master
+'
+
+test_expect_success 'am with dos files config am.keepcr' '
+	git config am.keepcr 1 &&
+	git checkout -b dosfiles-conf-keepcr initial &&
+	git format-patch -k --stdout initial..master | git am -k -3 &&
+	git diff --exit-code master
+'
+
+test_expect_success 'am with dos files config am.keepcr overriden by --no-keep-cr' '
+	git config am.keepcr 1 &&
+	git checkout -b dosfiles-conf-keepcr-override initial &&
+	git format-patch -k initial..master &&
+	test_must_fail git am -k -3 --no-keep-cr 000*.patch &&
+	git am --abort &&
+	rm -rf .git/rebase-apply 000*.patch
+'
+
+test_expect_success 'am with dos files with --keep-cr continue' '
+	git checkout -b dosfiles-keep-cr-continue initial &&
+	git format-patch -k initial..master &&
+	append_cr <file1a >file &&
+	git commit -m "different patch" file &&
+	test_must_fail git am --keep-cr -k -3 000*.patch &&
+	append_cr <file2 >file &&
+	git add file &&
+	git am -3 --resolved &&
+	git diff --exit-code master
+'
+
+test_expect_success 'am with unix files config am.keepcr overriden by --no-keep-cr' '
+	git config am.keepcr 1 &&
+	git checkout -b unixfiles-conf-keepcr-override initial &&
+	cp -f file1 file &&
+	git commit -m "line ending to unix" file &&
+	git format-patch -k initial..master &&
+	git am -k -3 --no-keep-cr 000*.patch &&
+	git diff --exit-code -w master
+'
+
+test_done
diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh
new file mode 100755
index 0000000000..552da65a61
--- /dev/null
+++ b/t/t5407-post-rewrite-hook.sh
@@ -0,0 +1,199 @@
+#!/bin/sh
+#
+# Copyright (c) 2010 Thomas Rast
+#
+
+test_description='Test the post-rewrite hook.'
+. ./test-lib.sh
+
+test_expect_success 'setup' '
+	test_commit A foo A &&
+	test_commit B foo B &&
+	test_commit C foo C &&
+	test_commit D foo D
+'
+
+mkdir .git/hooks
+
+cat >.git/hooks/post-rewrite <<EOF
+#!/bin/sh
+echo \$@ > "$TRASH_DIRECTORY"/post-rewrite.args
+cat > "$TRASH_DIRECTORY"/post-rewrite.data
+EOF
+chmod u+x .git/hooks/post-rewrite
+
+clear_hook_input () {
+	rm -f post-rewrite.args post-rewrite.data
+}
+
+verify_hook_input () {
+	test_cmp "$TRASH_DIRECTORY"/post-rewrite.args expected.args &&
+	test_cmp "$TRASH_DIRECTORY"/post-rewrite.data expected.data
+}
+
+test_expect_success 'git commit --amend' '
+	clear_hook_input &&
+	echo "D new message" > newmsg &&
+	oldsha=$(git rev-parse HEAD^0) &&
+	git commit -Fnewmsg --amend &&
+	echo amend > expected.args &&
+	echo $oldsha $(git rev-parse HEAD^0) > expected.data &&
+	verify_hook_input
+'
+
+test_expect_success 'git commit --amend --no-post-rewrite' '
+	clear_hook_input &&
+	echo "D new message again" > newmsg &&
+	git commit --no-post-rewrite -Fnewmsg --amend &&
+	test ! -f post-rewrite.args &&
+	test ! -f post-rewrite.data
+'
+
+test_expect_success 'git rebase' '
+	git reset --hard D &&
+	clear_hook_input &&
+	test_must_fail git rebase --onto A B &&
+	echo C > foo &&
+	git add foo &&
+	git rebase --continue &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse C) $(git rev-parse HEAD^)
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+test_expect_success 'git rebase --skip' '
+	git reset --hard D &&
+	clear_hook_input &&
+	test_must_fail git rebase --onto A B &&
+	test_must_fail git rebase --skip &&
+	echo D > foo &&
+	git add foo &&
+	git rebase --continue &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+test_expect_success 'git rebase -m' '
+	git reset --hard D &&
+	clear_hook_input &&
+	test_must_fail git rebase -m --onto A B &&
+	echo C > foo &&
+	git add foo &&
+	git rebase --continue &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse C) $(git rev-parse HEAD^)
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+test_expect_success 'git rebase -m --skip' '
+	git reset --hard D &&
+	clear_hook_input &&
+	test_must_fail git rebase --onto A B &&
+	test_must_fail git rebase --skip &&
+	echo D > foo &&
+	git add foo &&
+	git rebase --continue &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+. "$TEST_DIRECTORY"/lib-rebase.sh
+
+set_fake_editor
+
+# Helper to work around the lack of one-shot exporting for
+# test_must_fail (as it is a shell function)
+test_fail_interactive_rebase () {
+	(
+		FAKE_LINES="$1" &&
+		shift &&
+		export FAKE_LINES &&
+		test_must_fail git rebase -i "$@"
+	)
+}
+
+test_expect_success 'git rebase -i (unchanged)' '
+	git reset --hard D &&
+	clear_hook_input &&
+	test_fail_interactive_rebase "1 2" --onto A B &&
+	echo C > foo &&
+	git add foo &&
+	git rebase --continue &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse C) $(git rev-parse HEAD^)
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+test_expect_success 'git rebase -i (skip)' '
+	git reset --hard D &&
+	clear_hook_input &&
+	test_fail_interactive_rebase "2" --onto A B &&
+	echo D > foo &&
+	git add foo &&
+	git rebase --continue &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+test_expect_success 'git rebase -i (squash)' '
+	git reset --hard D &&
+	clear_hook_input &&
+	test_fail_interactive_rebase "1 squash 2" --onto A B &&
+	echo C > foo &&
+	git add foo &&
+	git rebase --continue &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse C) $(git rev-parse HEAD)
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+test_expect_success 'git rebase -i (fixup without conflict)' '
+	git reset --hard D &&
+	clear_hook_input &&
+	FAKE_LINES="1 fixup 2" git rebase -i B &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse C) $(git rev-parse HEAD)
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+test_expect_success 'git rebase -i (double edit)' '
+	git reset --hard D &&
+	clear_hook_input &&
+	FAKE_LINES="edit 1 edit 2" git rebase -i B &&
+	git rebase --continue &&
+	echo something > foo &&
+	git add foo &&
+	git rebase --continue &&
+	echo rebase >expected.args &&
+	cat >expected.data <<EOF &&
+$(git rev-parse C) $(git rev-parse HEAD^)
+$(git rev-parse D) $(git rev-parse HEAD)
+EOF
+	verify_hook_input
+'
+
+test_done
diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh
index 2692050209..230c0cd784 100755
--- a/t/t5505-remote.sh
+++ b/t/t5505-remote.sh
@@ -110,17 +110,18 @@ test_expect_success 'remove remote' '
 test_expect_success 'remove remote protects non-remote branches' '
 (
 	cd test &&
-	(cat >expect1 <<EOF
+	{ cat >expect1 <<EOF
 Note: A non-remote branch was not removed; to delete it, use:
   git branch -d master
 EOF
-    cat >expect2 <<EOF
+	} &&
+	{ cat >expect2 <<EOF
 Note: Non-remote branches were not removed; to delete them, use:
   git branch -d foobranch
   git branch -d master
 EOF
-) &&
-	git tag footag
+	} &&
+	git tag footag &&
 	git config --add remote.oops.fetch "+refs/*:refs/*" &&
 	git remote rm oops 2>actual1 &&
 	git branch foobranch &&
@@ -534,43 +535,34 @@ test_expect_success 'show empty remote' '
 '
 
 test_expect_success 'new remote' '
-(
 	git remote add someremote foo &&
 	echo foo >expect &&
 	git config --get-all remote.someremote.url >actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url bar' '
-(
 	git remote set-url someremote bar &&
 	echo bar >expect &&
 	git config --get-all remote.someremote.url >actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url baz bar' '
-(
 	git remote set-url someremote baz bar &&
 	echo baz >expect &&
 	git config --get-all remote.someremote.url >actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url zot bar' '
-(
 	test_must_fail git remote set-url someremote zot bar &&
 	echo baz >expect &&
 	git config --get-all remote.someremote.url >actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --push zot baz' '
-(
 	test_must_fail git remote set-url --push someremote zot baz &&
 	echo "YYY" >expect &&
 	echo baz >>expect &&
@@ -578,11 +570,9 @@ test_expect_success 'remote set-url --push zot baz' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --push zot' '
-(
 	git remote set-url --push someremote zot &&
 	echo zot >expect &&
 	echo "YYY" >>expect &&
@@ -591,11 +581,9 @@ test_expect_success 'remote set-url --push zot' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --push qux zot' '
-(
 	git remote set-url --push someremote qux zot &&
 	echo qux >expect &&
 	echo "YYY" >>expect &&
@@ -604,11 +592,9 @@ test_expect_success 'remote set-url --push qux zot' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --push foo qu+x' '
-(
 	git remote set-url --push someremote foo qu+x &&
 	echo foo >expect &&
 	echo "YYY" >>expect &&
@@ -617,11 +603,9 @@ test_expect_success 'remote set-url --push foo qu+x' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --push --add aaa' '
-(
 	git remote set-url --push --add someremote aaa &&
 	echo foo >expect &&
 	echo aaa >>expect &&
@@ -631,11 +615,9 @@ test_expect_success 'remote set-url --push --add aaa' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --push bar aaa' '
-(
 	git remote set-url --push someremote bar aaa &&
 	echo foo >expect &&
 	echo bar >>expect &&
@@ -645,11 +627,9 @@ test_expect_success 'remote set-url --push bar aaa' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --push --delete bar' '
-(
 	git remote set-url --push --delete someremote bar &&
 	echo foo >expect &&
 	echo "YYY" >>expect &&
@@ -658,11 +638,9 @@ test_expect_success 'remote set-url --push --delete bar' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --push --delete foo' '
-(
 	git remote set-url --push --delete someremote foo &&
 	echo "YYY" >expect &&
 	echo baz >>expect &&
@@ -670,11 +648,9 @@ test_expect_success 'remote set-url --push --delete foo' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --add bbb' '
-(
 	git remote set-url --add someremote bbb &&
 	echo "YYY" >expect &&
 	echo baz >>expect &&
@@ -683,12 +659,10 @@ test_expect_success 'remote set-url --add bbb' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --delete .*' '
-(
-	test_must_fail git remote set-url --delete someremote .* &&
+	test_must_fail git remote set-url --delete someremote .\* &&
 	echo "YYY" >expect &&
 	echo baz >>expect &&
 	echo bbb >>expect &&
@@ -696,11 +670,9 @@ test_expect_success 'remote set-url --delete .*' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --delete bbb' '
-(
 	git remote set-url --delete someremote bbb &&
 	echo "YYY" >expect &&
 	echo baz >>expect &&
@@ -708,11 +680,9 @@ test_expect_success 'remote set-url --delete bbb' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --delete baz' '
-(
 	test_must_fail git remote set-url --delete someremote baz &&
 	echo "YYY" >expect &&
 	echo baz >>expect &&
@@ -720,11 +690,9 @@ test_expect_success 'remote set-url --delete baz' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --add ccc' '
-(
 	git remote set-url --add someremote ccc &&
 	echo "YYY" >expect &&
 	echo baz >>expect &&
@@ -733,11 +701,9 @@ test_expect_success 'remote set-url --add ccc' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_expect_success 'remote set-url --delete baz' '
-(
 	git remote set-url --delete someremote baz &&
 	echo "YYY" >expect &&
 	echo ccc >>expect &&
@@ -745,7 +711,6 @@ test_expect_success 'remote set-url --delete baz' '
 	echo "YYY" >>actual &&
 	git config --get-all remote.someremote.url >>actual &&
 	cmp expect actual
-)
 '
 
 test_done
diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh
index 169af1edde..721821ec92 100755
--- a/t/t5510-fetch.sh
+++ b/t/t5510-fetch.sh
@@ -341,6 +341,13 @@ test_expect_success 'fetch into the current branch with --update-head-ok' '
 
 '
 
+test_expect_success 'fetch --dry-run' '
+
+	rm -f .git/FETCH_HEAD &&
+	git fetch --dry-run . &&
+	! test -f .git/FETCH_HEAD
+'
+
 test_expect_success "should be able to fetch with duplicate refspecs" '
         mkdir dups &&
         cd dups &&
diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh
index 0f04b2e894..6a37a4d993 100755
--- a/t/t5516-fetch-push.sh
+++ b/t/t5516-fetch-push.sh
@@ -528,7 +528,7 @@ test_expect_success 'push does not update local refs on failure' '
 	mk_test heads/master &&
 	mk_child child &&
 	mkdir testrepo/.git/hooks &&
-	echo exit 1 >testrepo/.git/hooks/pre-receive &&
+	echo "#!/no/frobnication/today" >testrepo/.git/hooks/pre-receive &&
 	chmod +x testrepo/.git/hooks/pre-receive &&
 	(cd child &&
 		git pull .. master
@@ -660,4 +660,54 @@ test_expect_success 'push with branches containing #' '
 	git checkout master
 '
 
+test_expect_success 'push --porcelain' '
+	mk_empty &&
+	echo >.git/foo  "To testrepo" &&
+	echo >>.git/foo "*	refs/heads/master:refs/remotes/origin/master	[new branch]"  &&
+	echo >>.git/foo "Done" &&
+	git push >.git/bar --porcelain  testrepo refs/heads/master:refs/remotes/origin/master &&
+	(
+		cd testrepo &&
+		r=$(git show-ref -s --verify refs/remotes/origin/master) &&
+		test "z$r" = "z$the_commit" &&
+		test 1 = $(git for-each-ref refs/remotes/origin | wc -l)
+	) &&
+	test_cmp .git/foo .git/bar
+'
+
+test_expect_success 'push --porcelain bad url' '
+	mk_empty &&
+	test_must_fail git push >.git/bar --porcelain asdfasdfasd refs/heads/master:refs/remotes/origin/master &&
+	test_must_fail grep -q Done .git/bar
+'
+
+test_expect_success 'push --porcelain rejected' '
+	mk_empty &&
+	git push testrepo refs/heads/master:refs/remotes/origin/master &&
+	(cd testrepo &&
+		git reset --hard origin/master^
+		git config receive.denyCurrentBranch true) &&
+
+	echo >.git/foo  "To testrepo"  &&
+	echo >>.git/foo "!	refs/heads/master:refs/heads/master	[remote rejected] (branch is currently checked out)" &&
+
+	test_must_fail git push >.git/bar --porcelain  testrepo refs/heads/master:refs/heads/master &&
+	test_cmp .git/foo .git/bar
+'
+
+test_expect_success 'push --porcelain --dry-run rejected' '
+	mk_empty &&
+	git push testrepo refs/heads/master:refs/remotes/origin/master &&
+	(cd testrepo &&
+		git reset --hard origin/master
+		git config receive.denyCurrentBranch true) &&
+
+	echo >.git/foo  "To testrepo"  &&
+	echo >>.git/foo "!	refs/heads/master^:refs/heads/master	[rejected] (non-fast-forward)" &&
+	echo >>.git/foo "Done" &&
+
+	test_must_fail git push >.git/bar --porcelain  --dry-run testrepo refs/heads/master^:refs/heads/master &&
+	test_cmp .git/foo .git/bar
+'
+
 test_done
diff --git a/t/t5540-http-push.sh b/t/t5540-http-push.sh
index bb18f8bfc4..37fe875411 100755
--- a/t/t5540-http-push.sh
+++ b/t/t5540-http-push.sh
@@ -137,6 +137,9 @@ test_expect_success 'PUT and MOVE sends object to URLs with SHA-1 hash suffix' '
 
 '
 
+test_http_push_nonff "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git \
+	"$ROOT_PATH"/test_repo_clone master
+
 stop_httpd
 
 test_done
diff --git a/t/t5541-http-push.sh b/t/t5541-http-push.sh
index 53f54a2789..17e1bdc5a8 100755
--- a/t/t5541-http-push.sh
+++ b/t/t5541-http-push.sh
@@ -34,8 +34,34 @@ test_expect_success 'setup remote repository' '
 	mv test_repo.git "$HTTPD_DOCUMENT_ROOT_PATH"
 '
 
-test_expect_success 'clone remote repository' '
+cat >exp <<EOF
+GET  /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200
+POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200
+EOF
+test_expect_success 'no empty path components' '
+	# In the URL, add a trailing slash, and see if git appends yet another
+	# slash.
 	cd "$ROOT_PATH" &&
+	git clone $HTTPD_URL/smart/test_repo.git/ test_repo_clone &&
+
+	sed -e "
+		s/^.* \"//
+		s/\"//
+		s/ [1-9][0-9]*\$//
+		s/^GET /GET  /
+	" >act <"$HTTPD_ROOT_PATH"/access.log &&
+
+	# Clear the log, so that it does not affect the "used receive-pack
+	# service" test which reads the log too.
+	#
+	# We do this before the actual comparison to ensure the log is cleared.
+	echo > "$HTTPD_ROOT_PATH"/access.log &&
+
+	test_cmp exp act
+'
+
+test_expect_success 'clone remote repository' '
+	rm -rf test_repo_clone &&
 	git clone $HTTPD_URL/smart/test_repo.git test_repo_clone
 '
 
@@ -68,6 +94,7 @@ test_expect_success 'create and delete remote branch' '
 '
 
 cat >exp <<EOF
+
 GET  /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200
 POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200
 GET  /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
@@ -88,26 +115,8 @@ test_expect_success 'used receive-pack service' '
 	test_cmp exp act
 '
 
-test_expect_success 'non-fast-forward push fails' '
-	cd "$ROOT_PATH"/test_repo_clone &&
-	git checkout master &&
-	echo "changed" > path2 &&
-	git commit -a -m path2 --amend &&
-
-	HEAD=$(git rev-parse --verify HEAD) &&
-	!(git push -v origin >output 2>&1) &&
-	(cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git &&
-	 test $HEAD != $(git rev-parse --verify HEAD))
-'
-
-test_expect_success 'non-fast-forward push show ref status' '
-	grep "^ ! \[rejected\][ ]*master -> master (non-fast-forward)$" output
-'
-
-test_expect_success 'non-fast-forward push shows help message' '
-	grep "To prevent you from losing history, non-fast-forward updates were rejected" \
-		output
-'
+test_http_push_nonff "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git \
+	"$ROOT_PATH"/test_repo_clone master
 
 test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper' '
 	# create a dissimilarly-named remote ref so that git is unable to match the
diff --git a/t/t5550-http-fetch.sh b/t/t5550-http-fetch.sh
index 8cfce969bc..fc675b50ad 100755
--- a/t/t5550-http-fetch.sh
+++ b/t/t5550-http-fetch.sh
@@ -55,12 +55,43 @@ test_expect_success 'http remote detects correct HEAD' '
 
 test_expect_success 'fetch packed objects' '
 	cp -R "$HTTPD_DOCUMENT_ROOT_PATH"/repo.git "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git &&
-	cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git &&
-	git --bare repack &&
-	git --bare prune-packed &&
+	(cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git &&
+	 git --bare repack &&
+	 git --bare prune-packed
+	) &&
 	git clone $HTTPD_URL/dumb/repo_pack.git
 '
 
+test_expect_success 'fetch notices corrupt pack' '
+	cp -R "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad1.git &&
+	(cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad1.git &&
+	 p=`ls objects/pack/pack-*.pack` &&
+	 chmod u+w $p &&
+	 printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc
+	) &&
+	mkdir repo_bad1.git &&
+	(cd repo_bad1.git &&
+	 git --bare init &&
+	 test_must_fail git --bare fetch $HTTPD_URL/dumb/repo_bad1.git &&
+	 test 0 = `ls objects/pack/pack-*.pack | wc -l`
+	)
+'
+
+test_expect_success 'fetch notices corrupt idx' '
+	cp -R "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad2.git &&
+	(cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad2.git &&
+	 p=`ls objects/pack/pack-*.idx` &&
+	 chmod u+w $p &&
+	 printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc
+	) &&
+	mkdir repo_bad2.git &&
+	(cd repo_bad2.git &&
+	 git --bare init &&
+	 test_must_fail git --bare fetch $HTTPD_URL/dumb/repo_bad2.git &&
+	 test 0 = `ls objects/pack | wc -l`
+	)
+'
+
 test_expect_success 'did not use upload-pack service' '
 	grep '/git-upload-pack' <"$HTTPD_ROOT_PATH"/access.log >act
 	: >exp
diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh
index 214756731b..678cee502d 100755
--- a/t/t5601-clone.sh
+++ b/t/t5601-clone.sh
@@ -34,7 +34,7 @@ test_expect_success 'clone with excess parameters (2)' '
 test_expect_success 'output from clone' '
 	rm -fr dst &&
 	git clone -n "file://$(pwd)/src" dst >output &&
-	test $(grep Initialized output | wc -l) = 1
+	test $(grep Clon output | wc -l) = 1
 '
 
 test_expect_success 'clone does not keep pack' '
diff --git a/t/t5704-bundle.sh b/t/t5704-bundle.sh
index a8f4419e61..ddc3dc52f4 100755
--- a/t/t5704-bundle.sh
+++ b/t/t5704-bundle.sh
@@ -30,4 +30,20 @@ test_expect_success 'tags can be excluded by rev-list options' '
 
 '
 
+test_expect_failure 'bundle --stdin' '
+
+	echo master | git bundle create stdin-bundle.bdl --stdin &&
+	git ls-remote stdin-bundle.bdl >output &&
+	grep master output
+
+'
+
+test_expect_failure 'bundle --stdin <rev-list options>' '
+
+	echo master | git bundle create hybrid-bundle.bdl --stdin tag &&
+	git ls-remote hybrid-bundle.bdl >output &&
+	grep master output
+
+'
+
 test_done
diff --git a/t/t5705-clone-2gb.sh b/t/t5705-clone-2gb.sh
index adfaae8c5b..8afbdd4de2 100755
--- a/t/t5705-clone-2gb.sh
+++ b/t/t5705-clone-2gb.sh
@@ -12,7 +12,7 @@ test_expect_success 'setup' '
 
 	git config pack.compression 0 &&
 	git config pack.depth 0 &&
-	blobsize=$((20*1024*1024)) &&
+	blobsize=$((100*1024*1024)) &&
 	blobcount=$((2*1024*1024*1024/$blobsize+1)) &&
 	i=1 &&
 	(while test $i -le $blobcount
@@ -36,9 +36,15 @@ test_expect_success 'setup' '
 
 '
 
-test_expect_success 'clone' '
+test_expect_success 'clone - bare' '
 
-	git clone --bare --no-hardlinks . clone
+	git clone --bare --no-hardlinks . clone-bare
+
+'
+
+test_expect_success 'clone - with worktree, file:// protocol' '
+
+	git clone file://. clone-wt
 
 '
 
diff --git a/t/t6002-rev-list-bisect.sh b/t/t6002-rev-list-bisect.sh
index b4e8fbaa5e..fb07536a0f 100755
--- a/t/t6002-rev-list-bisect.sh
+++ b/t/t6002-rev-list-bisect.sh
@@ -5,7 +5,7 @@
 test_description='Tests git rev-list --bisect functionality'
 
 . ./test-lib.sh
-. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions
+. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions
 
 # usage: test_bisection max-diff bisect-option head ^prune...
 #
diff --git a/t/t6003-rev-list-topo-order.sh b/t/t6003-rev-list-topo-order.sh
index 2c73f2da7b..e4c52b0214 100755
--- a/t/t6003-rev-list-topo-order.sh
+++ b/t/t6003-rev-list-topo-order.sh
@@ -6,7 +6,7 @@
 test_description='Tests git rev-list --topo-order functionality'
 
 . ./test-lib.sh
-. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions
+. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions
 
 list_duplicates()
 {
diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh
index 313897bbc0..e8fde5c19c 100755
--- a/t/t6006-rev-list-format.sh
+++ b/t/t6006-rev-list-format.sh
@@ -244,7 +244,7 @@ test_expect_success 'oneline with empty message' '
 	git commit -m "dummy" --allow-empty &&
 	git commit -m "dummy" --allow-empty &&
 	git filter-branch --msg-filter "sed -e s/dummy//" HEAD^^.. &&
-	git rev-list --oneline HEAD > /tmp/test.txt &&
+	git rev-list --oneline HEAD >test.txt &&
 	test $(git rev-list --oneline HEAD | wc -l) -eq 5 &&
 	test $(git rev-list --oneline --graph HEAD | wc -l) -eq 5
 '
diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh
index 6291307cd0..d486d73994 100755
--- a/t/t6023-merge-file.sh
+++ b/t/t6023-merge-file.sh
@@ -64,6 +64,10 @@ cp new1.txt test.txt
 test_expect_success "merge without conflict" \
 	"git merge-file test.txt orig.txt new2.txt"
 
+cp new1.txt test.txt
+test_expect_success "merge without conflict (--quiet)" \
+	"git merge-file --quiet test.txt orig.txt new2.txt"
+
 cp new1.txt test2.txt
 test_expect_success "merge without conflict (missing LF at EOF)" \
 	"git merge-file test2.txt orig.txt new2.txt"
@@ -177,7 +181,7 @@ et nihil mihi deerit;
 
 In loco pascuae ibi me collocavit;
 super aquam refectionis educavit me.
-|||||||
+||||||| new5.txt
 et nihil mihi deerit.
 In loco pascuae ibi me collocavit,
 super aquam refectionis educavit me;
@@ -211,4 +215,41 @@ test_expect_success '"diff3 -m" style output (2)' '
 	test_cmp expect actual
 '
 
+cat >expect <<\EOF
+Dominus regit me,
+<<<<<<<<<< new8.txt
+et nihil mihi deerit;
+
+
+
+
+In loco pascuae ibi me collocavit;
+super aquam refectionis educavit me.
+|||||||||| new5.txt
+et nihil mihi deerit.
+In loco pascuae ibi me collocavit,
+super aquam refectionis educavit me;
+==========
+et nihil mihi deerit,
+
+
+
+
+In loco pascuae ibi me collocavit --
+super aquam refectionis educavit me,
+>>>>>>>>>> new9.txt
+animam meam convertit,
+deduxit me super semitas jusitiae,
+propter nomen suum.
+Nam et si ambulavero in medio umbrae mortis,
+non timebo mala, quoniam TU mecum es:
+virga tua et baculus tuus ipsa me consolata sunt.
+EOF
+
+test_expect_success 'marker size' '
+	test_must_fail git merge-file -p --marker-size=10 \
+		new8.txt new5.txt new9.txt >actual &&
+	test_cmp expect actual
+'
+
 test_done
diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh
index f105fab98e..e673c25e94 100755
--- a/t/t6101-rev-parse-parents.sh
+++ b/t/t6101-rev-parse-parents.sh
@@ -6,7 +6,7 @@
 test_description='Test git rev-parse with different parent options'
 
 . ./test-lib.sh
-. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions
+. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions
 
 date >path0
 git update-index --add path0
diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh
index 065deadc29..876d1ab743 100755
--- a/t/t6120-describe.sh
+++ b/t/t6120-describe.sh
@@ -8,7 +8,7 @@ test_description='test describe
  o----o----o----o----o----.    /
        \        A    c        /
         .------------o---o---o
-                     D   e
+                   D,R   e
 '
 . ./test-lib.sh
 
@@ -68,6 +68,8 @@ test_expect_success setup '
 	echo D >another && git add another && git commit -m D &&
 	test_tick &&
 	git tag -a -m D D &&
+	test_tick &&
+	git tag -a -m R R &&
 
 	test_tick &&
 	echo DD >another && git commit -a -m another &&
@@ -89,10 +91,10 @@ test_expect_success setup '
 
 check_describe A-* HEAD
 check_describe A-* HEAD^
-check_describe D-* HEAD^^
+check_describe R-* HEAD^^
 check_describe A-* HEAD^^2
 check_describe B HEAD^^2^
-check_describe D-* HEAD^^^
+check_describe R-* HEAD^^^
 
 check_describe c-* --tags HEAD
 check_describe c-* --tags HEAD^
diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh
index 42f6fff373..42f8ece097 100755
--- a/t/t6200-fmt-merge-msg.sh
+++ b/t/t6200-fmt-merge-msg.sh
@@ -7,65 +7,69 @@ test_description='fmt-merge-msg test'
 
 . ./test-lib.sh
 
-datestamp=1151939923
-setdate () {
-	GIT_COMMITTER_DATE="$datestamp +0200"
-	GIT_AUTHOR_DATE="$datestamp +0200"
-	datestamp=`expr "$datestamp" + 1`
-	export GIT_COMMITTER_DATE GIT_AUTHOR_DATE
-}
-
 test_expect_success setup '
 	echo one >one &&
 	git add one &&
-	setdate &&
+	test_tick &&
 	git commit -m "Initial" &&
 
+	git clone . remote &&
+
 	echo uno >one &&
 	echo dos >two &&
 	git add two &&
-	setdate &&
+	test_tick &&
 	git commit -a -m "Second" &&
 
 	git checkout -b left &&
 
-	echo $datestamp >one &&
-	setdate &&
+	echo "c1" >one &&
+	test_tick &&
 	git commit -a -m "Common #1" &&
 
-	echo $datestamp >one &&
-	setdate &&
+	echo "c2" >one &&
+	test_tick &&
 	git commit -a -m "Common #2" &&
 
 	git branch right &&
 
-	echo $datestamp >two &&
-	setdate &&
+	echo "l3" >two &&
+	test_tick &&
 	git commit -a -m "Left #3" &&
 
-	echo $datestamp >two &&
-	setdate &&
+	echo "l4" >two &&
+	test_tick &&
 	git commit -a -m "Left #4" &&
 
-	echo $datestamp >two &&
-	setdate &&
+	echo "l5" >two &&
+	test_tick &&
 	git commit -a -m "Left #5" &&
+	git tag tag-l5 &&
 
 	git checkout right &&
 
-	echo $datestamp >three &&
+	echo "r3" >three &&
 	git add three &&
-	setdate &&
+	test_tick &&
 	git commit -a -m "Right #3" &&
+	git tag tag-r3 &&
 
-	echo $datestamp >three &&
-	setdate &&
+	echo "r4" >three &&
+	test_tick &&
 	git commit -a -m "Right #4" &&
 
-	echo $datestamp >three &&
-	setdate &&
+	echo "r5" >three &&
+	test_tick &&
 	git commit -a -m "Right #5" &&
 
+	git checkout -b long &&
+	i=0 &&
+	while test $i -lt 30
+	do
+		test_commit $i one &&
+		i=$(($i+1))
+	done &&
+
 	git show-branch
 '
 
@@ -113,7 +117,7 @@ test_expect_success 'merge-msg test #3-1' '
 	git config merge.log true &&
 
 	git checkout master &&
-	setdate &&
+	test_tick &&
 	git fetch . left &&
 
 	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
@@ -127,7 +131,7 @@ test_expect_success 'merge-msg test #3-2' '
 	git config merge.summary true &&
 
 	git checkout master &&
-	setdate &&
+	test_tick &&
 	git fetch . left &&
 
 	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
@@ -159,7 +163,7 @@ test_expect_success 'merge-msg test #4-1' '
 	git config merge.log true &&
 
 	git checkout master &&
-	setdate &&
+	test_tick &&
 	git fetch . left right &&
 
 	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
@@ -173,7 +177,7 @@ test_expect_success 'merge-msg test #4-2' '
 	git config merge.summary true &&
 
 	git checkout master &&
-	setdate &&
+	test_tick &&
 	git fetch . left right &&
 
 	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
@@ -187,7 +191,7 @@ test_expect_success 'merge-msg test #5-1' '
 	git config merge.log yes &&
 
 	git checkout master &&
-	setdate &&
+	test_tick &&
 	git fetch . left right &&
 
 	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
@@ -201,7 +205,7 @@ test_expect_success 'merge-msg test #5-2' '
 	git config merge.summary yes &&
 
 	git checkout master &&
-	setdate &&
+	test_tick &&
 	git fetch . left right &&
 
 	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
@@ -215,7 +219,7 @@ test_expect_success 'merge-msg -F' '
 	git config merge.summary yes &&
 
 	git checkout master &&
-	setdate &&
+	test_tick &&
 	git fetch . left right &&
 
 	git fmt-merge-msg -F .git/FETCH_HEAD >actual &&
@@ -229,7 +233,7 @@ test_expect_success 'merge-msg -F in subdirectory' '
 	git config merge.summary yes &&
 
 	git checkout master &&
-	setdate &&
+	test_tick &&
 	git fetch . left right &&
 	mkdir sub &&
 	cp .git/FETCH_HEAD sub/FETCH_HEAD &&
@@ -240,4 +244,128 @@ test_expect_success 'merge-msg -F in subdirectory' '
 	test_cmp expected actual
 '
 
+test_expect_success 'merge-msg with nothing to merge' '
+
+	git config --unset-all merge.log
+	git config --unset-all merge.summary
+	git config merge.summary yes &&
+
+	(
+		cd remote &&
+		git checkout -b unrelated &&
+		test_tick &&
+		git fetch origin &&
+		git fmt-merge-msg <.git/FETCH_HEAD >../actual
+	) &&
+
+	test_cmp /dev/null actual
+'
+
+cat >expected <<\EOF
+Merge tag 'tag-r3'
+
+* tag 'tag-r3':
+  Right #3
+  Common #2
+  Common #1
+EOF
+
+test_expect_success 'merge-msg tag' '
+
+	git config --unset-all merge.log
+	git config --unset-all merge.summary
+	git config merge.summary yes &&
+
+	git checkout master &&
+	test_tick &&
+	git fetch . tag tag-r3 &&
+
+	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
+	test_cmp expected actual
+'
+
+cat >expected <<\EOF
+Merge tags 'tag-r3' and 'tag-l5'
+
+* tag 'tag-r3':
+  Right #3
+  Common #2
+  Common #1
+
+* tag 'tag-l5':
+  Left #5
+  Left #4
+  Left #3
+  Common #2
+  Common #1
+EOF
+
+test_expect_success 'merge-msg two tags' '
+
+	git config --unset-all merge.log
+	git config --unset-all merge.summary
+	git config merge.summary yes &&
+
+	git checkout master &&
+	test_tick &&
+	git fetch . tag tag-r3 tag tag-l5 &&
+
+	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
+	test_cmp expected actual
+'
+
+cat >expected <<\EOF
+Merge branch 'left', tag 'tag-r3'
+
+* tag 'tag-r3':
+  Right #3
+  Common #2
+  Common #1
+
+* left:
+  Left #5
+  Left #4
+  Left #3
+  Common #2
+  Common #1
+EOF
+
+test_expect_success 'merge-msg tag and branch' '
+
+	git config --unset-all merge.log
+	git config --unset-all merge.summary
+	git config merge.summary yes &&
+
+	git checkout master &&
+	test_tick &&
+	git fetch . tag tag-r3 left &&
+
+	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
+	test_cmp expected actual
+'
+
+cat >expected <<\EOF
+Merge branch 'long'
+
+* long: (35 commits)
+EOF
+
+test_expect_success 'merge-msg lots of commits' '
+
+	git checkout master &&
+	test_tick &&
+	git fetch . long &&
+
+	i=29 &&
+	while test $i -gt 9
+	do
+		echo "  $i" &&
+		i=$(($i-1))
+	done >>expected &&
+	echo "  ..." >>expected
+
+	git fmt-merge-msg <.git/FETCH_HEAD >actual &&
+	test_cmp expected actual
+'
+
 test_done
diff --git a/t/t7002-grep.sh b/t/t7002-grep.sh
index af63d6ec6d..e249c3ed41 100755
--- a/t/t7002-grep.sh
+++ b/t/t7002-grep.sh
@@ -442,6 +442,58 @@ test_expect_success 'grep -Fi' '
 	test_cmp expected actual
 '
 
+test_expect_success 'outside of git repository' '
+	rm -fr non &&
+	mkdir -p non/git/sub &&
+	echo hello >non/git/file1 &&
+	echo world >non/git/sub/file2 &&
+	echo ".*o*" >non/git/.gitignore &&
+	{
+		echo file1:hello &&
+		echo sub/file2:world
+	} >non/expect.full &&
+	echo file2:world >non/expect.sub
+	(
+		GIT_CEILING_DIRECTORIES="$(pwd)/non/git" &&
+		export GIT_CEILING_DIRECTORIES &&
+		cd non/git &&
+		test_must_fail git grep o &&
+		git grep --no-index o >../actual.full &&
+		test_cmp ../expect.full ../actual.full
+		cd sub &&
+		test_must_fail git grep o &&
+		git grep --no-index o >../../actual.sub &&
+		test_cmp ../../expect.sub ../../actual.sub
+	)
+'
+
+test_expect_success 'inside git repository but with --no-index' '
+	rm -fr is &&
+	mkdir -p is/git/sub &&
+	echo hello >is/git/file1 &&
+	echo world >is/git/sub/file2 &&
+	echo ".*o*" >is/git/.gitignore &&
+	{
+		echo file1:hello &&
+		echo sub/file2:world
+	} >is/expect.full &&
+	: >is/expect.empty &&
+	echo file2:world >is/expect.sub
+	(
+		cd is/git &&
+		git init &&
+		test_must_fail git grep o >../actual.full &&
+		test_cmp ../expect.empty ../actual.full &&
+		git grep --no-index o >../actual.full &&
+		test_cmp ../expect.full ../actual.full &&
+		cd sub &&
+		test_must_fail git grep o >../../actual.sub &&
+		test_cmp ../../expect.empty ../../actual.sub &&
+		git grep --no-index o >../../actual.sub &&
+		test_cmp ../../expect.sub ../../actual.sub
+	)
+'
+
 test_expect_success 'setup double-dash tests' '
 cat >double-dash <<EOF &&
 --
diff --git a/t/t7005-editor.sh b/t/t7005-editor.sh
index 5257f4d261..6355698c6b 100755
--- a/t/t7005-editor.sh
+++ b/t/t7005-editor.sh
@@ -13,7 +13,7 @@ test_expect_success 'determine default editor' '
 
 '
 
-if ! expr "$vi" : '^[a-z]*$' >/dev/null
+if ! expr "$vi" : '[a-z]*$' >/dev/null
 then
 	vi=
 fi
diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh
index d9202d5af5..0f6b367832 100755
--- a/t/t7006-pager.sh
+++ b/t/t7006-pager.sh
@@ -4,17 +4,24 @@ test_description='Test automatic use of a pager.'
 
 . ./test-lib.sh
 
-rm -f stdout_is_tty
+cleanup_fail() {
+	echo >&2 cleanup failed
+	(exit 1)
+}
+
 test_expect_success 'set up terminal for tests' '
+	rm -f stdout_is_tty ||
+	cleanup_fail &&
+
 	if test -t 1
 	then
-		: > stdout_is_tty
+		>stdout_is_tty
 	elif
 		test_have_prereq PERL &&
 		"$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl \
 			sh -c "test -t 1"
 	then
-		: > test_terminal_works
+		>test_terminal_works
 	fi
 '
 
@@ -32,53 +39,68 @@ else
 	say no usable terminal, so skipping some tests
 fi
 
-unset GIT_PAGER GIT_PAGER_IN_USE
-git config --unset core.pager
-PAGER='cat > paginated.out'
-export PAGER
-
 test_expect_success 'setup' '
+	unset GIT_PAGER GIT_PAGER_IN_USE &&
+	test_might_fail git config --unset core.pager &&
+
+	PAGER="cat >paginated.out" &&
+	export PAGER &&
+
 	test_commit initial
 '
 
-rm -f paginated.out
 test_expect_success TTY 'some commands use a pager' '
+	rm -f paginated.out ||
+	cleanup_fail &&
+
 	test_terminal git log &&
 	test -e paginated.out
 '
 
-rm -f paginated.out
 test_expect_success TTY 'some commands do not use a pager' '
+	rm -f paginated.out ||
+	cleanup_fail &&
+
 	test_terminal git rev-list HEAD &&
 	! test -e paginated.out
 '
 
-rm -f paginated.out
 test_expect_success 'no pager when stdout is a pipe' '
+	rm -f paginated.out ||
+	cleanup_fail &&
+
 	git log | cat &&
 	! test -e paginated.out
 '
 
-rm -f paginated.out
 test_expect_success 'no pager when stdout is a regular file' '
-	git log > file &&
+	rm -f paginated.out ||
+	cleanup_fail &&
+
+	git log >file &&
 	! test -e paginated.out
 '
 
-rm -f paginated.out
 test_expect_success TTY 'git --paginate rev-list uses a pager' '
+	rm -f paginated.out ||
+	cleanup_fail &&
+
 	test_terminal git --paginate rev-list HEAD &&
 	test -e paginated.out
 '
 
-rm -f file paginated.out
 test_expect_success 'no pager even with --paginate when stdout is a pipe' '
+	rm -f file paginated.out ||
+	cleanup_fail &&
+
 	git --paginate log | cat &&
 	! test -e paginated.out
 '
 
-rm -f paginated.out
 test_expect_success TTY 'no pager with --no-pager' '
+	rm -f paginated.out ||
+	cleanup_fail &&
+
 	test_terminal git --no-pager log &&
 	! test -e paginated.out
 '
@@ -86,88 +108,119 @@ test_expect_success TTY 'no pager with --no-pager' '
 # A colored commit log will begin with an appropriate ANSI escape
 # for the first color; the text "commit" comes later.
 colorful() {
-	read firstline < $1
-	! expr "$firstline" : "^[a-zA-Z]" >/dev/null
+	read firstline <$1
+	! expr "$firstline" : "[a-zA-Z]" >/dev/null
 }
 
-rm -f colorful.log colorless.log
 test_expect_success 'tests can detect color' '
-	git log --no-color > colorless.log &&
-	git log --color > colorful.log &&
+	rm -f colorful.log colorless.log ||
+	cleanup_fail &&
+
+	git log --no-color >colorless.log &&
+	git log --color >colorful.log &&
 	! colorful colorless.log &&
 	colorful colorful.log
 '
 
-rm -f colorless.log
-git config color.ui auto
 test_expect_success 'no color when stdout is a regular file' '
-	git log > colorless.log &&
+	rm -f colorless.log &&
+	git config color.ui auto ||
+	cleanup_fail &&
+
+	git log >colorless.log &&
 	! colorful colorless.log
 '
 
-rm -f paginated.out
-git config color.ui auto
 test_expect_success TTY 'color when writing to a pager' '
-	TERM=vt100 test_terminal git log &&
+	rm -f paginated.out &&
+	git config color.ui auto ||
+	cleanup_fail &&
+
+	(
+		TERM=vt100 &&
+		export TERM &&
+		test_terminal git log
+	) &&
 	colorful paginated.out
 '
 
-rm -f colorful.log
-git config color.ui auto
 test_expect_success 'color when writing to a file intended for a pager' '
-	TERM=vt100 GIT_PAGER_IN_USE=true git log > colorful.log &&
+	rm -f colorful.log &&
+	git config color.ui auto ||
+	cleanup_fail &&
+
+	(
+		TERM=vt100 &&
+		GIT_PAGER_IN_USE=true &&
+		export TERM GIT_PAGER_IN_USE &&
+		git log >colorful.log
+	) &&
 	colorful colorful.log
 '
 
-unset PAGER GIT_PAGER
-git config --unset core.pager
 test_expect_success 'determine default pager' '
+	unset PAGER GIT_PAGER &&
+	test_might_fail git config --unset core.pager ||
+	cleanup_fail &&
+
 	less=$(git var GIT_PAGER) &&
 	test -n "$less"
 '
 
-if expr "$less" : '^[a-z]*$' > /dev/null && test_have_prereq TTY
+if expr "$less" : '[a-z][a-z]*$' >/dev/null && test_have_prereq TTY
 then
 	test_set_prereq SIMPLEPAGER
 fi
 
-unset PAGER GIT_PAGER
-git config --unset core.pager
-rm -f default_pager_used
 test_expect_success SIMPLEPAGER 'default pager is used by default' '
-	cat > $less <<-EOF &&
-	#!$SHELL_PATH
-	wc > default_pager_used
+	unset PAGER GIT_PAGER &&
+	test_might_fail git config --unset core.pager &&
+	rm -f default_pager_used ||
+	cleanup_fail &&
+
+	cat >$less <<-\EOF &&
+	#!/bin/sh
+	wc >default_pager_used
 	EOF
 	chmod +x $less &&
-	PATH=.:$PATH test_terminal git log &&
+	(
+		PATH=.:$PATH &&
+		export PATH &&
+		test_terminal git log
+	) &&
 	test -e default_pager_used
 '
 
-unset GIT_PAGER
-git config --unset core.pager
-rm -f PAGER_used
 test_expect_success TTY 'PAGER overrides default pager' '
-	PAGER="wc > PAGER_used" &&
+	unset GIT_PAGER &&
+	test_might_fail git config --unset core.pager &&
+	rm -f PAGER_used ||
+	cleanup_fail &&
+
+	PAGER="wc >PAGER_used" &&
 	export PAGER &&
 	test_terminal git log &&
 	test -e PAGER_used
 '
 
-unset GIT_PAGER
-rm -f core.pager_used
 test_expect_success TTY 'core.pager overrides PAGER' '
+	unset GIT_PAGER &&
+	rm -f core.pager_used ||
+	cleanup_fail &&
+
 	PAGER=wc &&
 	export PAGER &&
-	git config core.pager "wc > core.pager_used" &&
+	git config core.pager "wc >core.pager_used" &&
 	test_terminal git log &&
 	test -e core.pager_used
 '
 
-rm -f GIT_PAGER_used
 test_expect_success TTY 'GIT_PAGER overrides core.pager' '
+	rm -f GIT_PAGER_used ||
+	cleanup_fail &&
+
 	git config core.pager wc &&
-	GIT_PAGER="wc > GIT_PAGER_used" &&
+	GIT_PAGER="wc >GIT_PAGER_used" &&
 	export GIT_PAGER &&
 	test_terminal git log &&
 	test -e GIT_PAGER_used
diff --git a/t/t7010-setup.sh b/t/t7010-setup.sh
index d8a7c79852..0335a9a158 100755
--- a/t/t7010-setup.sh
+++ b/t/t7010-setup.sh
@@ -103,14 +103,10 @@ test_expect_success 'git ls-files (relative #3)' '
 	git add a &&
 	(
 		cd a/b &&
-		if git ls-files "../e/f"
-		then
-			echo Gaah, should have failed
-			exit 1
-		else
-			: happy
-		fi
-	)
+		git ls-files "../e/f"
+	)  >current &&
+	echo ../e/f >expect &&
+	test_cmp expect current
 
 '
 
diff --git a/t/t7103-reset-bare.sh b/t/t7103-reset-bare.sh
index afb55b3a46..1eef93c2b2 100755
--- a/t/t7103-reset-bare.sh
+++ b/t/t7103-reset-bare.sh
@@ -11,21 +11,26 @@ test_expect_success 'setup non-bare' '
 	git commit -a -m two
 '
 
-test_expect_success 'hard reset requires a worktree' '
+test_expect_success '"hard" reset requires a worktree' '
 	(cd .git &&
 	 test_must_fail git reset --hard)
 '
 
-test_expect_success 'merge reset requires a worktree' '
+test_expect_success '"merge" reset requires a worktree' '
 	(cd .git &&
 	 test_must_fail git reset --merge)
 '
 
-test_expect_success 'mixed reset is ok' '
+test_expect_success '"keep" reset requires a worktree' '
+	(cd .git &&
+	 test_must_fail git reset --keep)
+'
+
+test_expect_success '"mixed" reset is ok' '
 	(cd .git && git reset)
 '
 
-test_expect_success 'soft reset is ok' '
+test_expect_success '"soft" reset is ok' '
 	(cd .git && git reset --soft)
 '
 
@@ -40,19 +45,23 @@ test_expect_success 'setup bare' '
 	cd bare.git
 '
 
-test_expect_success 'hard reset is not allowed in bare' '
+test_expect_success '"hard" reset is not allowed in bare' '
 	test_must_fail git reset --hard HEAD^
 '
 
-test_expect_success 'merge reset is not allowed in bare' '
+test_expect_success '"merge" reset is not allowed in bare' '
 	test_must_fail git reset --merge HEAD^
 '
 
-test_expect_success 'mixed reset is not allowed in bare' '
+test_expect_success '"keep" reset is not allowed in bare' '
+	test_must_fail git reset --keep HEAD^
+'
+
+test_expect_success '"mixed" reset is not allowed in bare' '
 	test_must_fail git reset --mixed HEAD^
 '
 
-test_expect_success 'soft reset is allowed in bare' '
+test_expect_success '"soft" reset is allowed in bare' '
 	git reset --soft HEAD^ &&
 	test "`git show --pretty=format:%s | head -n 1`" = "one"
 '
diff --git a/t/t7110-reset-merge.sh b/t/t7110-reset-merge.sh
index 8704d00196..70cdd8e618 100755
--- a/t/t7110-reset-merge.sh
+++ b/t/t7110-reset-merge.sh
@@ -3,7 +3,7 @@
 # Copyright (c) 2009 Christian Couder
 #
 
-test_description='Tests for "git reset --merge"'
+test_description='Tests for "git reset" with "--merge" and "--keep" options'
 
 . ./test-lib.sh
 
@@ -47,6 +47,30 @@ test_expect_success 'reset --merge is ok when switching back' '
 #
 #           working index HEAD target         working index HEAD
 #           ----------------------------------------------------
+# file1:     C       C     C    D     --keep   D       D     D
+# file2:     C       D     D    D     --keep   C       D     D
+test_expect_success 'reset --keep is ok with changes in file it does not touch' '
+    git reset --hard second &&
+    cat file1 >file2 &&
+    git reset --keep HEAD^ &&
+    ! grep 4 file1 &&
+    grep 4 file2 &&
+    test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" &&
+    test -z "$(git diff --cached)"
+'
+
+test_expect_success 'reset --keep is ok when switching back' '
+    git reset --keep second &&
+    grep 4 file1 &&
+    grep 4 file2 &&
+    test "$(git rev-parse HEAD)" = "$(git rev-parse second)" &&
+    test -z "$(git diff --cached)"
+'
+
+# The next test will test the following:
+#
+#           working index HEAD target         working index HEAD
+#           ----------------------------------------------------
 # file1:     B       B     C    D     --merge  D       D     D
 # file2:     C       D     D    D     --merge  C       D     D
 test_expect_success 'reset --merge discards changes added to index (1)' '
@@ -78,6 +102,18 @@ test_expect_success 'reset --merge is ok again when switching back (1)' '
 #
 #           working index HEAD target         working index HEAD
 #           ----------------------------------------------------
+# file1:     B       B     C    D     --keep   (disallowed)
+test_expect_success 'reset --keep fails with changes in index in files it touches' '
+    git reset --hard second &&
+    echo "line 5" >> file1 &&
+    git add file1 &&
+    test_must_fail git reset --keep HEAD^
+'
+
+# The next test will test the following:
+#
+#           working index HEAD target         working index HEAD
+#           ----------------------------------------------------
 # file1:     C       C     C    D     --merge  D       D     D
 # file2:     C       C     D    D     --merge  D       D     D
 test_expect_success 'reset --merge discards changes added to index (2)' '
@@ -104,6 +140,30 @@ test_expect_success 'reset --merge is ok again when switching back (2)' '
 #
 #           working index HEAD target         working index HEAD
 #           ----------------------------------------------------
+# file1:     C       C     C    D     --keep   D       D     D
+# file2:     C       C     D    D     --keep   C       D     D
+test_expect_success 'reset --keep keeps changes it does not touch' '
+    git reset --hard second &&
+    echo "line 4" >> file2 &&
+    git add file2 &&
+    git reset --keep HEAD^ &&
+    grep 4 file2 &&
+    test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" &&
+    test -z "$(git diff --cached)"
+'
+
+test_expect_success 'reset --keep keeps changes when switching back' '
+    git reset --keep second &&
+    grep 4 file2 &&
+    grep 4 file1 &&
+    test "$(git rev-parse HEAD)" = "$(git rev-parse second)" &&
+    test -z "$(git diff --cached)"
+'
+
+# The next test will test the following:
+#
+#           working index HEAD target         working index HEAD
+#           ----------------------------------------------------
 # file1:     A       B     B    C     --merge  (disallowed)
 test_expect_success 'reset --merge fails with changes in file it touches' '
     git reset --hard second &&
@@ -116,6 +176,22 @@ test_expect_success 'reset --merge fails with changes in file it touches' '
     grep file1 err.log | grep "not uptodate"
 '
 
+# The next test will test the following:
+#
+#           working index HEAD target         working index HEAD
+#           ----------------------------------------------------
+# file1:     A       B     B    C     --keep   (disallowed)
+test_expect_success 'reset --keep fails with changes in file it touches' '
+    git reset --hard second &&
+    echo "line 5" >> file1 &&
+    test_tick &&
+    git commit -m "add line 5" file1 &&
+    sed -e "s/line 1/changed line 1/" <file1 >file3 &&
+    mv file3 file1 &&
+    test_must_fail git reset --keep HEAD^ 2>err.log &&
+    grep file1 err.log | grep "not uptodate"
+'
+
 test_expect_success 'setup 3 different branches' '
     git reset --hard second &&
     git branch branch1 &&
@@ -156,6 +232,18 @@ test_expect_success '"reset --merge HEAD^" is ok with pending merge' '
 #
 #           working index HEAD target         working index HEAD
 #           ----------------------------------------------------
+# file1:     X       U     B    C     --keep   (disallowed)
+test_expect_success '"reset --keep HEAD^" fails with pending merge' '
+    git reset --hard third &&
+    test_must_fail git merge branch1 &&
+    test_must_fail git reset --keep HEAD^ 2>err.log &&
+    grep "middle of a merge" err.log
+'
+
+# The next test will test the following:
+#
+#           working index HEAD target         working index HEAD
+#           ----------------------------------------------------
 # file1:     X       U     B    B     --merge  B       B     B
 test_expect_success '"reset --merge HEAD" is ok with pending merge' '
     git reset --hard third &&
@@ -166,7 +254,19 @@ test_expect_success '"reset --merge HEAD" is ok with pending merge' '
     test -z "$(git diff)"
 '
 
-test_expect_success '--merge with added/deleted' '
+# The next test will test the following:
+#
+#           working index HEAD target         working index HEAD
+#           ----------------------------------------------------
+# file1:     X       U     B    B     --keep   (disallowed)
+test_expect_success '"reset --keep HEAD" fails with pending merge' '
+    git reset --hard third &&
+    test_must_fail git merge branch1 &&
+    test_must_fail git reset --keep HEAD 2>err.log &&
+    grep "middle of a merge" err.log
+'
+
+test_expect_success '--merge is ok with added/deleted merge' '
     git reset --hard third &&
     rm -f file2 &&
     test_must_fail git merge branch3 &&
@@ -180,4 +280,16 @@ test_expect_success '--merge with added/deleted' '
     git diff --exit-code --cached
 '
 
+test_expect_success '--keep fails with added/deleted merge' '
+    git reset --hard third &&
+    rm -f file2 &&
+    test_must_fail git merge branch3 &&
+    ! test -f file2 &&
+    test -f file3 &&
+    git diff --exit-code file3 &&
+    git diff --exit-code branch3 file3 &&
+    test_must_fail git reset --keep HEAD 2>err.log &&
+    grep "middle of a merge" err.log
+'
+
 test_done
diff --git a/t/t7111-reset-table.sh b/t/t7111-reset-table.sh
index de896c948d..ce421ad5ac 100755
--- a/t/t7111-reset-table.sh
+++ b/t/t7111-reset-table.sh
@@ -44,26 +44,32 @@ A B C D soft   A B D
 A B C D mixed  A D D
 A B C D hard   D D D
 A B C D merge  XXXXX
+A B C D keep   XXXXX
 A B C C soft   A B C
 A B C C mixed  A C C
 A B C C hard   C C C
 A B C C merge  XXXXX
+A B C C keep   A C C
 B B C D soft   B B D
 B B C D mixed  B D D
 B B C D hard   D D D
 B B C D merge  D D D
+B B C D keep   XXXXX
 B B C C soft   B B C
 B B C C mixed  B C C
 B B C C hard   C C C
 B B C C merge  C C C
+B B C C keep   B C C
 B C C D soft   B C D
 B C C D mixed  B D D
 B C C D hard   D D D
 B C C D merge  XXXXX
+B C C D keep   XXXXX
 B C C C soft   B C C
 B C C C mixed  B C C
 B C C C hard   C C C
 B C C C merge  B C C
+B C C C keep   B C C
 EOF
 
 test_expect_success 'setting up branches to test with unmerged entries' '
@@ -104,10 +110,12 @@ X U B C soft   XXXXX
 X U B C mixed  X C C
 X U B C hard   C C C
 X U B C merge  C C C
+X U B C keep   XXXXX
 X U B B soft   XXXXX
 X U B B mixed  X B B
 X U B B hard   B B B
 X U B B merge  B B B
+X U B B keep   XXXXX
 EOF
 
 test_done
diff --git a/t/t7201-co.sh b/t/t7201-co.sh
index d20ed61b48..1337fa5a22 100755
--- a/t/t7201-co.sh
+++ b/t/t7201-co.sh
@@ -11,10 +11,12 @@ Test switching across them.
   ! [master] Initial A one, A two
    * [renamer] Renamer R one->uno, M two
     ! [side] Side M one, D two, A three
-  ---
-    + [side] Side M one, D two, A three
-   *  [renamer] Renamer R one->uno, M two
-  +*+ [master] Initial A one, A two
+     ! [simple] Simple D one, M two
+  ----
+     + [simple] Simple D one, M two
+    +  [side] Side M one, D two, A three
+   *   [renamer] Renamer R one->uno, M two
+  +*++ [master] Initial A one, A two
 
 '
 
@@ -52,6 +54,11 @@ test_expect_success setup '
 	git update-index --add --remove one two three &&
 	git commit -m "Side M one, D two, A three" &&
 
+	git checkout -b simple master &&
+	rm -f one &&
+	fill a c e > two &&
+	git commit -a -m "Simple D one, M two" &&
+
 	git checkout master
 '
 
@@ -166,6 +173,56 @@ test_expect_success 'checkout -m with merge conflict' '
 	! test -s current
 '
 
+test_expect_success 'format of merge conflict from checkout -m' '
+
+	git checkout -f master && git clean -f &&
+
+	fill b d > two &&
+	git checkout -m simple &&
+
+	git ls-files >current &&
+	fill same two two two >expect &&
+	test_cmp current expect &&
+
+	cat <<-EOF >expect &&
+	<<<<<<< simple
+	a
+	c
+	e
+	=======
+	b
+	d
+	>>>>>>> local
+	EOF
+	test_cmp two expect
+'
+
+test_expect_success 'checkout --merge --conflict=diff3 <branch>' '
+
+	git checkout -f master && git reset --hard && git clean -f &&
+
+	fill b d > two &&
+	git checkout --merge --conflict=diff3 simple &&
+
+	cat <<-EOF >expect &&
+	<<<<<<< simple
+	a
+	c
+	e
+	||||||| master
+	a
+	b
+	c
+	d
+	e
+	=======
+	b
+	d
+	>>>>>>> local
+	EOF
+	test_cmp two expect
+'
+
 test_expect_success 'checkout to detach HEAD (with advice declined)' '
 
 	git config advice.detachedHead false &&
@@ -481,7 +538,7 @@ test_expect_success 'checkout with --merge, in diff3 -m style' '
 	(
 		echo "<<<<<<< ours"
 		echo ourside
-		echo "|||||||"
+		echo "||||||| base"
 		echo original
 		echo "======="
 		echo theirside
@@ -525,7 +582,7 @@ test_expect_success 'checkout --conflict=diff3' '
 	(
 		echo "<<<<<<< ours"
 		echo ourside
-		echo "|||||||"
+		echo "||||||| base"
 		echo original
 		echo "======="
 		echo theirside
diff --git a/t/t7401-submodule-summary.sh b/t/t7401-submodule-summary.sh
index d3c039f724..cee319da0a 100755
--- a/t/t7401-submodule-summary.sh
+++ b/t/t7401-submodule-summary.sh
@@ -227,4 +227,11 @@ test_expect_success 'fail when using --files together with --cached' "
     test_must_fail git submodule summary --files --cached
 "
 
+test_expect_success 'should not fail in an empty repo' "
+    git init xyzzy &&
+    cd xyzzy &&
+    git submodule summary >output 2>&1 &&
+    test_cmp output /dev/null
+"
+
 test_done
diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh
index 7940901d47..8297cb4f1e 100755
--- a/t/t7501-commit.sh
+++ b/t/t7501-commit.sh
@@ -425,4 +425,16 @@ test_expect_success 'amend using the message from a commit named with tag' '
 
 '
 
+test_expect_success 'amend can copy notes' '
+
+	git config notes.rewrite.amend true &&
+	git config notes.rewriteRef "refs/notes/*" &&
+	test_commit foo &&
+	git notes add -m"a note" &&
+	test_tick &&
+	git commit --amend -m"new foo" &&
+	test "$(git notes show)" = "a note"
+
+'
+
 test_done
diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh
index 08c0247ac3..ac2e187a57 100755
--- a/t/t7502-commit.sh
+++ b/t/t7502-commit.sh
@@ -103,7 +103,7 @@ test_expect_success 'partial' '
 
 '
 
-test_expect_success 'partial modification in a subdirecotry' '
+test_expect_success 'partial modification in a subdirectory' '
 
 	test_tick &&
 	git commit -m "partial commit to subdirectory" not &&
diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh
index 253c334319..3d4f85d74f 100755
--- a/t/t7506-status-submodule.sh
+++ b/t/t7506-status-submodule.sh
@@ -34,7 +34,7 @@ test_expect_success 'status with modified file in submodule' '
 	(cd sub && git reset --hard) &&
 	echo "changed" >sub/foo &&
 	git status >output &&
-	grep "modified:   sub" output
+	grep "modified:   sub (modified content)" output
 '
 
 test_expect_success 'status with modified file in submodule (porcelain)' '
@@ -49,7 +49,7 @@ test_expect_success 'status with modified file in submodule (porcelain)' '
 test_expect_success 'status with added file in submodule' '
 	(cd sub && git reset --hard && echo >foo && git add foo) &&
 	git status >output &&
-	grep "modified:   sub" output
+	grep "modified:   sub (modified content)" output
 '
 
 test_expect_success 'status with added file in submodule (porcelain)' '
@@ -64,7 +64,12 @@ test_expect_success 'status with untracked file in submodule' '
 	(cd sub && git reset --hard) &&
 	echo "content" >sub/new-file &&
 	git status >output &&
-	grep "modified:   sub" output
+	grep "modified:   sub (untracked content)" output
+'
+
+test_expect_success 'status -uno with untracked file in submodule' '
+	git status -uno >output &&
+	grep "^nothing to commit" output
 '
 
 test_expect_success 'status with untracked file in submodule (porcelain)' '
@@ -74,6 +79,100 @@ test_expect_success 'status with untracked file in submodule (porcelain)' '
 	EOF
 '
 
+test_expect_success 'status with added and untracked file in submodule' '
+	(cd sub && git reset --hard && echo >foo && git add foo) &&
+	echo "content" >sub/new-file &&
+	git status >output &&
+	grep "modified:   sub (modified content, untracked content)" output
+'
+
+test_expect_success 'status with added and untracked file in submodule (porcelain)' '
+	(cd sub && git reset --hard && echo >foo && git add foo) &&
+	echo "content" >sub/new-file &&
+	git status --porcelain >output &&
+	diff output - <<-\EOF
+	 M sub
+	EOF
+'
+
+test_expect_success 'status with modified file in modified submodule' '
+	(cd sub && git reset --hard) &&
+	rm sub/new-file &&
+	(cd sub && echo "next change" >foo && git commit -m "next change" foo) &&
+	echo "changed" >sub/foo &&
+	git status >output &&
+	grep "modified:   sub (new commits, modified content)" output
+'
+
+test_expect_success 'status with modified file in modified submodule (porcelain)' '
+	(cd sub && git reset --hard) &&
+	echo "changed" >sub/foo &&
+	git status --porcelain >output &&
+	diff output - <<-\EOF
+	 M sub
+	EOF
+'
+
+test_expect_success 'status with added file in modified submodule' '
+	(cd sub && git reset --hard && echo >foo && git add foo) &&
+	git status >output &&
+	grep "modified:   sub (new commits, modified content)" output
+'
+
+test_expect_success 'status with added file in modified submodule (porcelain)' '
+	(cd sub && git reset --hard && echo >foo && git add foo) &&
+	git status --porcelain >output &&
+	diff output - <<-\EOF
+	 M sub
+	EOF
+'
+
+test_expect_success 'status with untracked file in modified submodule' '
+	(cd sub && git reset --hard) &&
+	echo "content" >sub/new-file &&
+	git status >output &&
+	grep "modified:   sub (new commits, untracked content)" output
+'
+
+test_expect_success 'status with untracked file in modified submodule (porcelain)' '
+	git status --porcelain >output &&
+	diff output - <<-\EOF
+	 M sub
+	EOF
+'
+
+test_expect_success 'status with added and untracked file in modified submodule' '
+	(cd sub && git reset --hard && echo >foo && git add foo) &&
+	echo "content" >sub/new-file &&
+	git status >output &&
+	grep "modified:   sub (new commits, modified content, untracked content)" output
+'
+
+test_expect_success 'status with added and untracked file in modified submodule (porcelain)' '
+	(cd sub && git reset --hard && echo >foo && git add foo) &&
+	echo "content" >sub/new-file &&
+	git status --porcelain >output &&
+	diff output - <<-\EOF
+	 M sub
+	EOF
+'
+
+test_expect_success 'setup .git file for sub' '
+	(cd sub &&
+	 rm -f new-file
+	 REAL="$(pwd)/../.real" &&
+	 mv .git "$REAL"
+	 echo "gitdir: $REAL" >.git) &&
+	 echo .real >>.gitignore &&
+	 git commit -m "added .real to .gitignore" .gitignore
+'
+
+test_expect_success 'status with added file in modified submodule with .git file' '
+	(cd sub && git reset --hard && echo >foo && git add foo) &&
+	git status >output &&
+	grep "modified:   sub (new commits, modified content)" output
+'
+
 test_expect_success 'rm submodule contents' '
 	rm -rf sub/* sub/.git
 '
diff --git a/t/t7508-status.sh b/t/t7508-status.sh
index 556d0faa77..008d5711b8 100755
--- a/t/t7508-status.sh
+++ b/t/t7508-status.sh
@@ -69,6 +69,34 @@ test_expect_success 'status (2)' '
 '
 
 cat >expect <<\EOF
+# On branch master
+# Changes to be committed:
+#	new file:   dir2/added
+#
+# Changed but not updated:
+#	modified:   dir1/modified
+#
+# Untracked files:
+#	dir1/untracked
+#	dir2/modified
+#	dir2/untracked
+#	expect
+#	output
+#	untracked
+EOF
+
+git config advice.statusHints false
+
+test_expect_success 'status (advice.statusHints false)' '
+
+	git status >output &&
+	test_cmp expect output
+
+'
+
+git config --unset advice.statusHints
+
+cat >expect <<\EOF
  M dir1/modified
 A  dir2/added
 ?? dir1/untracked
@@ -115,6 +143,23 @@ test_expect_success 'status (status.showUntrackedFiles no)' '
 	test_cmp expect output
 '
 
+cat >expect <<EOF
+# On branch master
+# Changes to be committed:
+#	new file:   dir2/added
+#
+# Changed but not updated:
+#	modified:   dir1/modified
+#
+# Untracked files not listed
+EOF
+git config advice.statusHints false
+test_expect_success 'status -uno (advice.statusHints false)' '
+	git status -uno >output &&
+	test_cmp expect output
+'
+git config --unset advice.statusHints
+
 cat >expect << EOF
  M dir1/modified
 A  dir2/added
@@ -496,6 +541,16 @@ test_expect_success 'dry-run of partial commit excluding new file in index' '
 	test_cmp expect output
 '
 
+cat >expect <<EOF
+:100644 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0000000000000000000000000000000000000000 M	dir1/modified
+EOF
+test_expect_success 'status refreshes the index' '
+	touch dir2/added &&
+	git status &&
+	git diff-files >output &&
+	test_cmp expect output
+'
+
 test_expect_success 'setup status submodule summary' '
 	test_create_repo sm && (
 		cd sm &&
@@ -693,4 +748,19 @@ test_expect_success 'commit --dry-run submodule summary (--amend)' '
 	test_cmp expect output
 '
 
+test_expect_success POSIXPERM 'status succeeds in a read-only repository' '
+	(
+		chmod a-w .git &&
+		# make dir1/tracked stat-dirty
+		>dir1/tracked1 && mv -f dir1/tracked1 dir1/tracked &&
+		git status -s >output &&
+		! grep dir1/tracked output &&
+		# make sure "status" succeeded without writing index out
+		git diff-files | grep dir1/tracked
+	)
+	status=$?
+	chmod 775 .git
+	(exit $status)
+'
+
 test_done
diff --git a/t/t7509-commit.sh b/t/t7509-commit.sh
index d52c060b06..3ea33db6c7 100755
--- a/t/t7509-commit.sh
+++ b/t/t7509-commit.sh
@@ -83,6 +83,52 @@ test_expect_success '--amend option copies authorship' '
 	test_cmp expect actual
 '
 
+sha1_file() {
+	echo "$*" | sed "s#..#.git/objects/&/#"
+}
+remove_object() {
+	rm -f $(sha1_file "$*")
+}
+no_reflog() {
+	cp .git/config .git/config.saved &&
+	echo "[core] logallrefupdates = false" >>.git/config &&
+	test_when_finished "mv -f .git/config.saved .git/config" &&
+
+	if test -e .git/logs
+	then
+		mv .git/logs . &&
+		test_when_finished "mv logs .git/"
+	fi
+}
+
+test_expect_success '--amend option with empty author' '
+	git cat-file commit Initial >tmp &&
+	sed "s/author [^<]* </author  </" tmp >empty-author &&
+	no_reflog &&
+	sha=$(git hash-object -t commit -w empty-author) &&
+	test_when_finished "remove_object $sha" &&
+	git checkout $sha &&
+	test_when_finished "git checkout Initial" &&
+	echo "Empty author test" >>foo &&
+	test_tick &&
+	! git commit -a -m "empty author" --amend 2>err &&
+	grep "empty ident" err
+'
+
+test_expect_success '--amend option with missing author' '
+	git cat-file commit Initial >tmp &&
+	sed "s/author [^<]* </author </" tmp >malformed &&
+	no_reflog &&
+	sha=$(git hash-object -t commit -w malformed) &&
+	test_when_finished "remove_object $sha" &&
+	git checkout $sha &&
+	test_when_finished "git checkout Initial" &&
+	echo "Missing author test" >>foo &&
+	test_tick &&
+	! git commit -a -m "malformed author" --amend 2>err &&
+	grep "empty ident" err
+'
+
 test_expect_success '--reset-author makes the commit ours even with --amend option' '
 	git checkout Initial &&
 	echo "Test 6" >>foo &&
diff --git a/t/t7604-merge-custom-message.sh b/t/t7604-merge-custom-message.sh
index 269cfdf267..9114785ef7 100755
--- a/t/t7604-merge-custom-message.sh
+++ b/t/t7604-merge-custom-message.sh
@@ -6,6 +6,15 @@ Testing merge when using a custom message for the merge commit.'
 
 . ./test-lib.sh
 
+create_merge_msgs() {
+	echo >exp.subject "custom message"
+
+	cp exp.subject exp.log &&
+	echo >>exp.log "" &&
+	echo >>exp.log "* commit 'c2':" &&
+	echo >>exp.log "  c2"
+}
+
 test_expect_success 'setup' '
 	echo c0 > c0.c &&
 	git add c0.c &&
@@ -19,16 +28,23 @@ test_expect_success 'setup' '
 	echo c2 > c2.c &&
 	git add c2.c &&
 	git commit -m c2 &&
-	git tag c2
+	git tag c2 &&
+	create_merge_msgs
 '
 
 
 test_expect_success 'merge c2 with a custom message' '
 	git reset --hard c1 &&
-	echo >expected "custom message" &&
-	git merge -m "custom message" c2 &&
+	git merge -m "$(cat exp.subject)" c2 &&
+	git cat-file commit HEAD | sed -e "1,/^$/d" >actual &&
+	test_cmp exp.subject actual
+'
+
+test_expect_success 'merge --log appends to custom message' '
+	git reset --hard c1 &&
+	git merge --log -m "$(cat exp.subject)" c2 &&
 	git cat-file commit HEAD | sed -e "1,/^$/d" >actual &&
-	test_cmp expected actual
+	test_cmp exp.log actual
 '
 
 test_done
diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh
index c09f375288..640b3d2bb4 100755
--- a/t/t9001-send-email.sh
+++ b/t/t9001-send-email.sh
@@ -852,4 +852,70 @@ test_expect_success 'no warning with sendemail.chainreplyto = true' '
 	! grep "no-chain-reply-to" errors
 '
 
+test_expect_success 'sendemail.to works' '
+	git config --replace-all sendemail.to "Somebody <somebody@ex.com>" &&
+	git send-email \
+		--dry-run \
+		--from="Example <nobody@example.com>" \
+		$patches $patches >stdout &&
+	grep "To: Somebody <somebody@ex.com>" stdout
+'
+
+test_expect_success '--no-to overrides sendemail.to' '
+	git send-email \
+		--dry-run \
+		--from="Example <nobody@example.com>" \
+		--no-to \
+		--to=nobody@example.com \
+		$patches $patches >stdout &&
+	grep "To: nobody@example.com" stdout &&
+	! grep "To: Somebody <somebody@ex.com>" stdout
+'
+
+test_expect_success 'sendemail.cc works' '
+	git config --replace-all sendemail.cc "Somebody <somebody@ex.com>" &&
+	git send-email \
+		--dry-run \
+		--from="Example <nobody@example.com>" \
+		--to=nobody@example.com \
+		$patches $patches >stdout &&
+	grep "Cc: Somebody <somebody@ex.com>" stdout
+'
+
+test_expect_success '--no-cc overrides sendemail.cc' '
+	git send-email \
+		--dry-run \
+		--from="Example <nobody@example.com>" \
+		--no-cc \
+		--cc=bodies@example.com \
+		--to=nobody@example.com \
+		$patches $patches >stdout &&
+	grep "Cc: bodies@example.com" stdout &&
+	! grep "Cc: Somebody <somebody@ex.com>" stdout
+'
+
+test_expect_success 'sendemail.bcc works' '
+	git config --replace-all sendemail.bcc "Other <other@ex.com>" &&
+	git send-email \
+		--dry-run \
+		--from="Example <nobody@example.com>" \
+		--to=nobody@example.com \
+		--smtp-server relay.example.com \
+		$patches $patches >stdout &&
+	grep "RCPT TO:<other@ex.com>" stdout
+'
+
+test_expect_success '--no-bcc overrides sendemail.bcc' '
+	git send-email \
+		--dry-run \
+		--from="Example <nobody@example.com>" \
+		--no-bcc \
+		--bcc=bodies@example.com \
+		--to=nobody@example.com \
+		--smtp-server relay.example.com \
+		$patches $patches >stdout &&
+	grep "RCPT TO:<bodies@example.com>" stdout &&
+	! grep "RCPT TO:<other@ex.com>" stdout
+'
+
 test_done
diff --git a/t/t9119-git-svn-info.sh b/t/t9119-git-svn-info.sh
index 95741cbbac..a9a558d292 100755
--- a/t/t9119-git-svn-info.sh
+++ b/t/t9119-git-svn-info.sh
@@ -7,9 +7,10 @@ test_description='git svn info'
 . ./lib-git-svn.sh
 
 # Tested with: svn, version 1.4.4 (r25188)
+# Tested with: svn, version 1.6.[12345689]
 v=`svn_cmd --version | sed -n -e 's/^svn, version \(1\.[0-9]*\.[0-9]*\).*$/\1/p'`
 case $v in
-1.[45].*)
+1.[456].*)
 	;;
 *)
 	say "skipping svn-info test (SVN version: $v not supported)"
diff --git a/t/t9129-git-svn-i18n-commitencoding.sh b/t/t9129-git-svn-i18n-commitencoding.sh
index b9224bdb20..1e9a2eb12b 100755
--- a/t/t9129-git-svn-i18n-commitencoding.sh
+++ b/t/t9129-git-svn-i18n-commitencoding.sh
@@ -14,10 +14,22 @@ compare_git_head_with () {
 	test_cmp current "$1"
 }
 
+a_utf8_locale=$(locale -a | sed -n '/\.[uU][tT][fF]-*8$/{
+	p
+	q
+}')
+
+if test -n "$a_utf8_locale"
+then
+	test_set_prereq UTF8
+else
+	say "UTF-8 locale not available, some tests are skipped"
+fi
+
 compare_svn_head_with () {
 	# extract just the log message and strip out committer info.
 	# don't use --limit here since svn 1.1.x doesn't have it,
-	LC_ALL=en_US.UTF-8 svn log `git svn info --url` | perl -w -e '
+	LC_ALL="$a_utf8_locale" svn log `git svn info --url` | perl -w -e '
 		use bytes;
 		$/ = ("-"x72) . "\n";
 		my @x = <STDIN>;
@@ -69,12 +81,6 @@ do
 	'
 done
 
-if locale -a |grep -q en_US.utf8; then
-	test_set_prereq UTF8
-else
-	say "UTF-8 locale not available, test skipped"
-fi
-
 test_expect_success UTF8 'ISO-8859-1 should match UTF-8 in svn' '
 	(
 		cd ISO8859-1 &&
diff --git a/t/t9150-svk-mergetickets.sh b/t/t9150-svk-mergetickets.sh
index 53581425c4..24c2421bfc 100755
--- a/t/t9150-svk-mergetickets.sh
+++ b/t/t9150-svk-mergetickets.sh
@@ -11,6 +11,7 @@ test_expect_success 'load svk depot' "
 	svnadmin load -q '$rawsvnrepo' \
 	  < '$TEST_DIRECTORY/t9150/svk-merge.dump' &&
 	git svn init --minimize-url -R svkmerge \
+	  --rewrite-root=http://svn.example.org \
 	  -T trunk -b branches '$svnrepo' &&
 	git svn fetch --all
 	"
diff --git a/t/t9151-svn-mergeinfo.sh b/t/t9151-svn-mergeinfo.sh
index 3569c62096..250c651eae 100755
--- a/t/t9151-svn-mergeinfo.sh
+++ b/t/t9151-svn-mergeinfo.sh
@@ -11,6 +11,7 @@ test_expect_success 'load svn dump' "
 	svnadmin load -q '$rawsvnrepo' \
 	  < '$TEST_DIRECTORY/t9151/svn-mergeinfo.dump' &&
 	git svn init --minimize-url -R svnmerge \
+	  --rewrite-root=http://svn.example.org \
 	  -T trunk -b branches '$svnrepo' &&
 	git svn fetch --all
 	"
@@ -33,6 +34,21 @@ test_expect_success 'svn non-merge merge commits did not become git merge commit
 	[ -z "$bad_non_merges" ]
 	'
 
+test_expect_success 'commit made to merged branch is reachable from the merge' '
+	before_commit=$(git rev-list --all --grep="trunk commit before merging trunk to b2")
+	merge_commit=$(git rev-list --all --grep="Merge trunk to b2")
+	not_reachable=$(git rev-list -1 $before_commit --not $merge_commit)
+	[ -z "$not_reachable" ]
+	'
+
+test_expect_success 'merging two branches in one commit is detected correctly' '
+	f1_commit=$(git rev-list --all --grep="make f1 branch from trunk")
+	f2_commit=$(git rev-list --all --grep="make f2 branch from trunk")
+	merge_commit=$(git rev-list --all --grep="Merge f1 and f2 to trunk")
+	not_reachable=$(git rev-list -1 $f1_commit $f2_commit --not $merge_commit)
+	[ -z "$not_reachable" ]
+	'
+
 test_expect_failure 'everything got merged in the end' '
 	unmerged=$(git rev-list --all --not master)
 	[ -z "$unmerged" ]
diff --git a/t/t9151/make-svnmerge-dump b/t/t9151/make-svnmerge-dump
index 3d73f140f8..e1e138cb1a 100644
--- a/t/t9151/make-svnmerge-dump
+++ b/t/t9151/make-svnmerge-dump
@@ -156,6 +156,89 @@ svn merge ../branches/right --accept postpone
 i=$(commit $i "non-merge right to trunk 2")
 cd ..
 
+say "Branching b1 from trunk"
+svn update
+svn cp trunk branches/b1
+i=$(commit $i "make b1 branch from trunk")
+
+say "Branching b2 from trunk"
+svn update
+svn cp trunk branches/b2
+i=$(commit $i "make b2 branch from trunk")
+
+say "Make a commit to b2"
+svn update
+cd branches/b2
+echo "b2" > b2file
+svn add b2file
+i=$(commit $i "b2 update 1")
+cd ../..
+
+say "Make a commit to b1"
+svn update
+cd branches/b1
+echo "b1" > b1file
+svn add b1file
+i=$(commit $i "b1 update 1")
+cd ../..
+
+say "Merge b1 to trunk"
+svn update
+cd trunk
+svn merge ../branches/b1/ --accept postpone
+i=$(commit $i "Merge b1 to trunk")
+cd ..
+
+say "Make a commit to trunk before merging trunk to b2"
+svn update
+cd trunk
+echo "trunk" > trunkfile
+svn add trunkfile
+i=$(commit $i "trunk commit before merging trunk to b2")
+cd ..
+
+say "Merge trunk to b2"
+svn update
+cd branches/b2
+svn merge ../../trunk/ --accept postpone
+i=$(commit $i "Merge trunk to b2")
+cd ../..
+
+say "Merge b2 to trunk"
+svn update
+cd trunk
+svn merge ../branches/b2/ --accept postpone
+svn resolved b1file
+svn resolved trunkfile
+i=$(commit $i "Merge b2 to trunk")
+cd ..
+
+say "Creating f1 from trunk with a new file"
+svn update
+svn cp trunk branches/f1
+cd branches/f1
+echo "f1" > f1file
+svn add f1file
+cd ../..
+i=$(commit $i "make f1 branch from trunk with a new file")
+
+say "Creating f2 from trunk with a new file"
+svn update
+svn cp trunk branches/f2
+cd branches/f2
+echo "f2" > f2file
+svn add f2file
+cd ../..
+i=$(commit $i "make f2 branch from trunk with a new file")
+
+say "Merge f1 and f2 to trunk in one go"
+svn update
+cd trunk
+svn merge ../branches/f1/ --accept postpone
+svn merge ../branches/f2/ --accept postpone
+i=$(commit $i "Merge f1 and f2 to trunk")
+cd ..
+
 say "Adding subdirectory to LEFT"
 svn update
 cd branches/left
@@ -174,8 +257,8 @@ cd ..
 
 say "Make PARTIAL branch"
 svn update
-i=$(commit $i "make partial branch")
 svn cp trunk/subdir branches/partial
+i=$(commit $i "make partial branch")
 
 say "Make a commit to PARTIAL"
 svn update
@@ -194,13 +277,13 @@ cd ../../
 
 say "Tagging trunk"
 svn update
-i=$(commit $i "tagging v1.0")
 svn cp trunk tags/v1.0
+i=$(commit $i "tagging v1.0")
 
 say "Branching BUGFIX from v1.0"
 svn update
-i=$(commit $i "make bugfix branch from tag")
 svn cp tags/v1.0 branches/bugfix
+i=$(commit $i "make bugfix branch from tag")
 
 say "Make a commit to BUGFIX"
 svn update
diff --git a/t/t9151/svn-mergeinfo.dump b/t/t9151/svn-mergeinfo.dump
index ebf386ebd5..47cafcf528 100644
--- a/t/t9151/svn-mergeinfo.dump
+++ b/t/t9151/svn-mergeinfo.dump
@@ -1633,13 +1633,427 @@ PROPS-END
 
 
 Revision-number: 25
+Prop-content-length: 129
+Content-length: 129
+
+K 7
+svn:log
+V 31
+(r25) make b1 branch from trunk
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:18:56.084589Z
+PROPS-END
+
+Node-path: branches/b1
+Node-kind: dir
+Node-action: add
+Node-copyfrom-rev: 24
+Node-copyfrom-path: trunk
+
+
+Revision-number: 26
+Prop-content-length: 129
+Content-length: 129
+
+K 7
+svn:log
+V 31
+(r26) make b2 branch from trunk
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:18:59.076940Z
+PROPS-END
+
+Node-path: branches/b2
+Node-kind: dir
+Node-action: add
+Node-copyfrom-rev: 25
+Node-copyfrom-path: trunk
+
+
+Revision-number: 27
+Prop-content-length: 115
+Content-length: 115
+
+K 7
+svn:log
+V 17
+(r27) b2 update 1
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:01.095762Z
+PROPS-END
+
+Node-path: branches/b2/b2file
+Node-kind: file
+Node-action: add
+Prop-content-length: 10
+Text-content-length: 3
+Text-content-md5: 5edbdd57cba621eb3c6e601bf563b4dc
+Text-content-sha1: 9d4b38049776bd0a2074d67cad23f8eaed35a3b3
+Content-length: 13
+
+PROPS-END
+b2
+
+
+Revision-number: 28
+Prop-content-length: 115
+Content-length: 115
+
+K 7
+svn:log
+V 17
+(r28) b1 update 1
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:03.097465Z
+PROPS-END
+
+Node-path: branches/b1/b1file
+Node-kind: file
+Node-action: add
+Prop-content-length: 10
+Text-content-length: 3
+Text-content-md5: 08778dfd9ac4f603231896aba7aad523
+Text-content-sha1: b551771aa4ad5b14123fc3bd98d89db2bc0edd4f
+Content-length: 13
+
+PROPS-END
+b1
+
+
+Revision-number: 29
+Prop-content-length: 121
+Content-length: 121
+
+K 7
+svn:log
+V 23
+(r29) Merge b1 to trunk
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:06.073175Z
+PROPS-END
+
+Node-path: trunk
+Node-kind: dir
+Node-action: change
+Prop-content-length: 118
+Content-length: 118
+
+K 13
+svn:mergeinfo
+V 83
+/branches/b1:25-28
+/branches/left:2-22
+/branches/left-sub:4-19
+/branches/right:2-22
+PROPS-END
+
+
+Node-path: trunk/b1file
+Node-kind: file
+Node-action: add
+Node-copyfrom-rev: 28
+Node-copyfrom-path: branches/b1/b1file
+Text-copy-source-md5: 08778dfd9ac4f603231896aba7aad523
+Text-copy-source-sha1: b551771aa4ad5b14123fc3bd98d89db2bc0edd4f
+
+
+Revision-number: 30
+Prop-content-length: 143
+Content-length: 143
+
+K 7
+svn:log
+V 45
+(r30) trunk commit before merging trunk to b2
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:08.096353Z
+PROPS-END
+
+Node-path: trunk/trunkfile
+Node-kind: file
+Node-action: add
+Prop-content-length: 10
+Text-content-length: 6
+Text-content-md5: edf45fe5c98c5367733b39bbb2bb20d9
+Text-content-sha1: 7361d1685e5c86dfc523620cfaf598f196f86239
+Content-length: 16
+
+PROPS-END
+trunk
+
+
+Revision-number: 31
+Prop-content-length: 121
+Content-length: 121
+
+K 7
+svn:log
+V 23
+(r31) Merge trunk to b2
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:11.081541Z
+PROPS-END
+
+Node-path: branches/b2
+Node-kind: dir
+Node-action: change
+Prop-content-length: 131
+Content-length: 131
+
+K 13
+svn:mergeinfo
+V 96
+/branches/b1:25-28
+/branches/left:2-22
+/branches/left-sub:4-19
+/branches/right:2-22
+/trunk:26-30
+PROPS-END
+
+
+Node-path: branches/b2/b1file
+Node-kind: file
+Node-action: add
+Node-copyfrom-rev: 30
+Node-copyfrom-path: trunk/b1file
+Text-copy-source-md5: 08778dfd9ac4f603231896aba7aad523
+Text-copy-source-sha1: b551771aa4ad5b14123fc3bd98d89db2bc0edd4f
+
+
+Node-path: branches/b2/trunkfile
+Node-kind: file
+Node-action: add
+Node-copyfrom-rev: 30
+Node-copyfrom-path: trunk/trunkfile
+Text-copy-source-md5: edf45fe5c98c5367733b39bbb2bb20d9
+Text-copy-source-sha1: 7361d1685e5c86dfc523620cfaf598f196f86239
+
+
+Revision-number: 32
+Prop-content-length: 121
+Content-length: 121
+
+K 7
+svn:log
+V 23
+(r32) Merge b2 to trunk
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:14.117939Z
+PROPS-END
+
+Node-path: trunk
+Node-kind: dir
+Node-action: change
+Prop-content-length: 138
+Content-length: 138
+
+K 13
+svn:mergeinfo
+V 102
+/branches/b1:25-28
+/branches/b2:26-31
+/branches/left:2-22
+/branches/left-sub:4-19
+/branches/right:2-22
+PROPS-END
+
+
+Node-path: trunk/b2file
+Node-kind: file
+Node-action: add
+Node-copyfrom-rev: 31
+Node-copyfrom-path: branches/b2/b2file
+Text-copy-source-md5: 5edbdd57cba621eb3c6e601bf563b4dc
+Text-copy-source-sha1: 9d4b38049776bd0a2074d67cad23f8eaed35a3b3
+
+
+Revision-number: 33
+Prop-content-length: 145
+Content-length: 145
+
+K 7
+svn:log
+V 47
+(r33) make f1 branch from trunk with a new file
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:17.105832Z
+PROPS-END
+
+Node-path: branches/f1
+Node-kind: dir
+Node-action: add
+Node-copyfrom-rev: 32
+Node-copyfrom-path: trunk
+
+
+Node-path: branches/f1/f1file
+Node-kind: file
+Node-action: add
+Prop-content-length: 10
+Text-content-length: 3
+Text-content-md5: 2b1abc6b6c5c0018851f9f8e6475563b
+Text-content-sha1: aece6dfba588900e00d95601d22b4408d49580af
+Content-length: 13
+
+PROPS-END
+f1
+
+
+Revision-number: 34
+Prop-content-length: 145
+Content-length: 145
+
+K 7
+svn:log
+V 47
+(r34) make f2 branch from trunk with a new file
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:20.110057Z
+PROPS-END
+
+Node-path: branches/f2
+Node-kind: dir
+Node-action: add
+Node-copyfrom-rev: 33
+Node-copyfrom-path: trunk
+
+
+Node-path: branches/f2/f2file
+Node-kind: file
+Node-action: add
+Prop-content-length: 10
+Text-content-length: 3
+Text-content-md5: 575c5638d60271457e54ab7d07309502
+Text-content-sha1: 1c49a440c352f3473efa9512255033b94dc7def0
+Content-length: 13
+
+PROPS-END
+f2
+
+
+Revision-number: 35
+Prop-content-length: 128
+Content-length: 128
+
+K 7
+svn:log
+V 30
+(r35) Merge f1 and f2 to trunk
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:24.081490Z
+PROPS-END
+
+Node-path: trunk
+Node-kind: dir
+Node-action: change
+Prop-content-length: 173
+Content-length: 173
+
+K 13
+svn:mergeinfo
+V 137
+/branches/b1:25-28
+/branches/b2:26-31
+/branches/f1:33-34
+/branches/f2:34
+/branches/left:2-22
+/branches/left-sub:4-19
+/branches/right:2-22
+PROPS-END
+
+
+Node-path: trunk/f1file
+Node-kind: file
+Node-action: add
+Node-copyfrom-rev: 34
+Node-copyfrom-path: branches/f1/f1file
+Text-copy-source-md5: 2b1abc6b6c5c0018851f9f8e6475563b
+Text-copy-source-sha1: aece6dfba588900e00d95601d22b4408d49580af
+
+
+Node-path: trunk/f2file
+Node-kind: file
+Node-action: add
+Node-copyfrom-rev: 34
+Node-copyfrom-path: branches/f2/f2file
+Text-copy-source-md5: 575c5638d60271457e54ab7d07309502
+Text-copy-source-sha1: 1c49a440c352f3473efa9512255033b94dc7def0
+
+
+Revision-number: 36
 Prop-content-length: 135
 Content-length: 135
 
 K 7
 svn:log
 V 37
-(r25) add subdirectory to left branch
+(r36) add subdirectory to left branch
 K 10
 svn:author
 V 3
@@ -1647,7 +2061,7 @@ adm
 K 8
 svn:date
 V 27
-2010-01-19T04:14:46.052649Z
+2010-02-22T06:19:26.113516Z
 PROPS-END
 
 Node-path: branches/left/subdir
@@ -1672,14 +2086,14 @@ PROPS-END
 Yeehaw
 
 
-Revision-number: 26
+Revision-number: 37
 Prop-content-length: 123
 Content-length: 123
 
 K 7
 svn:log
 V 25
-(r26) merge left to trunk
+(r37) merge left to trunk
 K 10
 svn:author
 V 3
@@ -1687,19 +2101,23 @@ adm
 K 8
 svn:date
 V 27
-2010-01-19T04:14:49.040783Z
+2010-02-22T06:19:29.073699Z
 PROPS-END
 
 Node-path: trunk
 Node-kind: dir
 Node-action: change
-Prop-content-length: 99
-Content-length: 99
+Prop-content-length: 173
+Content-length: 173
 
 K 13
 svn:mergeinfo
-V 64
-/branches/left:2-25
+V 137
+/branches/b1:25-28
+/branches/b2:26-31
+/branches/f1:33-34
+/branches/f2:34
+/branches/left:2-36
 /branches/left-sub:4-19
 /branches/right:2-22
 PROPS-END
@@ -1708,18 +2126,18 @@ PROPS-END
 Node-path: trunk/subdir
 Node-kind: dir
 Node-action: add
-Node-copyfrom-rev: 25
+Node-copyfrom-rev: 36
 Node-copyfrom-path: branches/left/subdir
 
 
-Revision-number: 27
-Prop-content-length: 118
-Content-length: 118
+Revision-number: 38
+Prop-content-length: 123
+Content-length: 123
 
 K 7
 svn:log
-V 20
-(r28) partial update
+V 25
+(r38) make partial branch
 K 10
 svn:author
 V 3
@@ -1727,16 +2145,34 @@ adm
 K 8
 svn:date
 V 27
-2010-01-19T04:14:53.049037Z
+2010-02-22T06:19:32.072243Z
 PROPS-END
 
 Node-path: branches/partial
 Node-kind: dir
 Node-action: add
-Node-copyfrom-rev: 26
+Node-copyfrom-rev: 37
 Node-copyfrom-path: trunk/subdir
 
 
+Revision-number: 39
+Prop-content-length: 118
+Content-length: 118
+
+K 7
+svn:log
+V 20
+(r39) partial update
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:34.097961Z
+PROPS-END
+
 Node-path: branches/partial/palindromes
 Node-kind: file
 Node-action: add
@@ -1750,14 +2186,14 @@ PROPS-END
 racecar
 
 
-Revision-number: 28
+Revision-number: 40
 Prop-content-length: 126
 Content-length: 126
 
 K 7
 svn:log
 V 28
-(r29) merge partial to trunk
+(r40) merge partial to trunk
 K 10
 svn:author
 V 3
@@ -1765,21 +2201,25 @@ adm
 K 8
 svn:date
 V 27
-2010-01-19T04:14:56.041526Z
+2010-02-22T06:19:37.080211Z
 PROPS-END
 
 Node-path: trunk/subdir
 Node-kind: dir
 Node-action: change
-Prop-content-length: 142
-Content-length: 142
+Prop-content-length: 246
+Content-length: 246
 
 K 13
 svn:mergeinfo
-V 106
-/branches/left/subdir:2-25
+V 210
+/branches/b1/subdir:25-28
+/branches/b2/subdir:26-31
+/branches/f1/subdir:33-34
+/branches/f2/subdir:34
+/branches/left/subdir:2-36
 /branches/left-sub/subdir:4-19
-/branches/partial:27
+/branches/partial:38-39
 /branches/right/subdir:2-22
 PROPS-END
 
@@ -1787,20 +2227,20 @@ PROPS-END
 Node-path: trunk/subdir/palindromes
 Node-kind: file
 Node-action: add
-Node-copyfrom-rev: 27
+Node-copyfrom-rev: 39
 Node-copyfrom-path: branches/partial/palindromes
 Text-copy-source-md5: 5d1c2024fb5efc4eef812856df1b080c
 Text-copy-source-sha1: 5f8509ddd14c91a52864dd1447344e706f9bbc69
 
 
-Revision-number: 29
-Prop-content-length: 131
-Content-length: 131
+Revision-number: 41
+Prop-content-length: 116
+Content-length: 116
 
 K 7
 svn:log
-V 33
-(r31) make bugfix branch from tag
+V 18
+(r41) tagging v1.0
 K 10
 svn:author
 V 3
@@ -1808,24 +2248,24 @@ adm
 K 8
 svn:date
 V 27
-2010-01-19T04:15:00.039761Z
+2010-02-22T06:19:40.083460Z
 PROPS-END
 
 Node-path: tags/v1.0
 Node-kind: dir
 Node-action: add
-Node-copyfrom-rev: 28
+Node-copyfrom-rev: 40
 Node-copyfrom-path: trunk
 
 
-Revision-number: 30
-Prop-content-length: 120
-Content-length: 120
+Revision-number: 42
+Prop-content-length: 131
+Content-length: 131
 
 K 7
 svn:log
-V 22
-(r32) commit to bugfix
+V 33
+(r42) make bugfix branch from tag
 K 10
 svn:author
 V 3
@@ -1833,16 +2273,34 @@ adm
 K 8
 svn:date
 V 27
-2010-01-19T04:15:03.043218Z
+2010-02-22T06:19:43.118075Z
 PROPS-END
 
 Node-path: branches/bugfix
 Node-kind: dir
 Node-action: add
-Node-copyfrom-rev: 29
+Node-copyfrom-rev: 41
 Node-copyfrom-path: tags/v1.0
 
 
+Revision-number: 43
+Prop-content-length: 120
+Content-length: 120
+
+K 7
+svn:log
+V 22
+(r43) commit to bugfix
+K 10
+svn:author
+V 3
+adm
+K 8
+svn:date
+V 27
+2010-02-22T06:19:45.079536Z
+PROPS-END
+
 Node-path: branches/bugfix/subdir/palindromes
 Node-kind: file
 Node-action: change
@@ -1855,14 +2313,14 @@ racecar
 kayak
 
 
-Revision-number: 31
+Revision-number: 44
 Prop-content-length: 125
 Content-length: 125
 
 K 7
 svn:log
 V 27
-(r33) Merge BUGFIX to TRUNK
+(r44) Merge BUGFIX to TRUNK
 K 10
 svn:author
 V 3
@@ -1870,41 +2328,49 @@ adm
 K 8
 svn:date
 V 27
-2010-01-19T04:15:06.043723Z
+2010-02-22T06:19:48.078914Z
 PROPS-END
 
 Node-path: trunk
 Node-kind: dir
 Node-action: change
-Prop-content-length: 133
-Content-length: 133
+Prop-content-length: 210
+Content-length: 210
 
 K 13
 svn:mergeinfo
-V 98
-/branches/bugfix:30
-/branches/left:2-25
+V 174
+/branches/b1:25-28
+/branches/b2:26-31
+/branches/bugfix:42-43
+/branches/f1:33-34
+/branches/f2:34
+/branches/left:2-36
 /branches/left-sub:4-19
 /branches/right:2-22
-/tags/v1.0:29
+/tags/v1.0:41
 PROPS-END
 
 
 Node-path: trunk/subdir
 Node-kind: dir
 Node-action: change
-Prop-content-length: 190
-Content-length: 190
+Prop-content-length: 297
+Content-length: 297
 
 K 13
 svn:mergeinfo
-V 154
-/branches/bugfix/subdir:30
-/branches/left/subdir:2-25
+V 261
+/branches/b1/subdir:25-28
+/branches/b2/subdir:26-31
+/branches/bugfix/subdir:42-43
+/branches/f1/subdir:33-34
+/branches/f2/subdir:34
+/branches/left/subdir:2-36
 /branches/left-sub/subdir:4-19
-/branches/partial:27
+/branches/partial:38-39
 /branches/right/subdir:2-22
-/tags/v1.0/subdir:29
+/tags/v1.0/subdir:41
 PROPS-END
 
 
diff --git a/t/t9501-gitweb-standalone-http-status.sh b/t/t9501-gitweb-standalone-http-status.sh
index d196cc5ca9..2487da1296 100755
--- a/t/t9501-gitweb-standalone-http-status.sh
+++ b/t/t9501-gitweb-standalone-http-status.sh
@@ -15,9 +15,10 @@ code and message.'
 # ----------------------------------------------------------------------
 # snapshot settings
 
-test_commit \
-	'SnapshotTests' \
-	'i can has snapshot?'
+test_expect_success 'setup' "
+	test_commit 'SnapshotTests' 'i can has snapshot?'
+"
+
 
 cat >>gitweb_config.perl <<\EOF
 $feature{'snapshot'}{'override'} = 0;
diff --git a/t/t9600-cvsimport.sh b/t/t9600-cvsimport.sh
index 363345faef..b572ce3ab7 100755
--- a/t/t9600-cvsimport.sh
+++ b/t/t9600-cvsimport.sh
@@ -47,13 +47,20 @@ EOF
 
 test_expect_success 'import a trivial module' '
 
-	git cvsimport -a -z 0 -C module-git module &&
+	git cvsimport -a -R -z 0 -C module-git module &&
 	test_cmp module-cvs/o_fortuna module-git/o_fortuna
 
 '
 
 test_expect_success 'pack refs' 'cd module-git && git gc && cd ..'
 
+test_expect_success 'initial import has correct .git/cvs-revisions' '
+
+	(cd module-git &&
+	 git log --format="o_fortuna 1.1 %H" -1) > expected &&
+	test_cmp expected module-git/.git/cvs-revisions
+'
+
 test_expect_success 'update cvs module' '
 
 	cd module-cvs &&
@@ -86,13 +93,21 @@ EOF
 test_expect_success 'update git module' '
 
 	cd module-git &&
-	git cvsimport -a -z 0 module &&
+	git cvsimport -a -R -z 0 module &&
 	git merge origin &&
 	cd .. &&
 	test_cmp module-cvs/o_fortuna module-git/o_fortuna
 
 '
 
+test_expect_success 'update has correct .git/cvs-revisions' '
+
+	(cd module-git &&
+	 git log --format="o_fortuna 1.1 %H" -1 HEAD^ &&
+	 git log --format="o_fortuna 1.2 %H" -1 HEAD) > expected &&
+	test_cmp expected module-git/.git/cvs-revisions
+'
+
 test_expect_success 'update cvs module' '
 
 	cd module-cvs &&
@@ -107,13 +122,22 @@ test_expect_success 'cvsimport.module config works' '
 
 	cd module-git &&
 		git config cvsimport.module module &&
-		git cvsimport -a -z0 &&
+		git cvsimport -a -R -z0 &&
 		git merge origin &&
 	cd .. &&
 	test_cmp module-cvs/tick module-git/tick
 
 '
 
+test_expect_success 'second update has correct .git/cvs-revisions' '
+
+	(cd module-git &&
+	 git log --format="o_fortuna 1.1 %H" -1 HEAD^^ &&
+	 git log --format="o_fortuna 1.2 %H" -1 HEAD^
+	 git log --format="tick 1.1 %H" -1 HEAD) > expected &&
+	test_cmp expected module-git/.git/cvs-revisions
+'
+
 test_expect_success 'import from a CVS working tree' '
 
 	$CVS co -d import-from-wt module &&
@@ -126,6 +150,12 @@ test_expect_success 'import from a CVS working tree' '
 
 '
 
+test_expect_success 'no .git/cvs-revisions created by default' '
+
+	! test -e import-from-wt/.git/cvs-revisions
+
+'
+
 test_expect_success 'test entire HEAD' 'test_cmp_branch_tree master'
 
 test_done
diff --git a/t/test-lib.sh b/t/test-lib.sh
index a0e396a952..9bfa14be7f 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -2,6 +2,18 @@
 #
 # Copyright (c) 2005 Junio C Hamano
 #
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see http://www.gnu.org/licenses/ .
 
 # if --tee was passed, write the output not only to the terminal, but
 # additionally to the file test-results/$BASENAME.out, too.
@@ -54,6 +66,10 @@ unset GIT_OBJECT_DIRECTORY
 unset GIT_CEILING_DIRECTORIES
 unset SHA1_FILE_DIRECTORIES
 unset SHA1_FILE_DIRECTORY
+unset GIT_NOTES_REF
+unset GIT_NOTES_DISPLAY_REF
+unset GIT_NOTES_REWRITE_REF
+unset GIT_NOTES_REWRITE_MODE
 GIT_MERGE_VERBOSITY=5
 export GIT_MERGE_VERBOSITY
 export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME
@@ -350,8 +366,10 @@ test_debug () {
 }
 
 test_run_ () {
+	test_cleanup=:
 	eval >&3 2>&4 "$1"
-	eval_ret="$?"
+	eval_ret=$?
+	eval >&3 2>&4 "$test_cleanup"
 	return 0
 }
 
@@ -512,6 +530,22 @@ test_must_fail () {
 	test $? -gt 0 -a $? -le 129 -o $? -gt 192
 }
 
+# Similar to test_must_fail, but tolerates success, too.  This is
+# meant to be used in contexts like:
+#
+#	test_expect_success 'some command works without configuration' '
+#		test_might_fail git config --unset all.configuration &&
+#		do something
+#	'
+#
+# Writing "git config --unset all.configuration || :" would be wrong,
+# because we want to notice if it fails due to segv.
+
+test_might_fail () {
+	"$@"
+	test $? -ge 0 -a $? -le 129 -o $? -gt 192
+}
+
 # test_cmp is a helper function to compare actual and expected output.
 # You can use it like:
 #
@@ -529,6 +563,31 @@ test_cmp() {
 	$GIT_TEST_CMP "$@"
 }
 
+# This function can be used to schedule some commands to be run
+# unconditionally at the end of the test to restore sanity:
+#
+#	test_expect_success 'test core.capslock' '
+#		git config core.capslock true &&
+#		test_when_finished "git config --unset core.capslock" &&
+#		hello world
+#	'
+#
+# That would be roughly equivalent to
+#
+#	test_expect_success 'test core.capslock' '
+#		git config core.capslock true &&
+#		hello world
+#		git config --unset core.capslock
+#	'
+#
+# except that the greeting and config --unset must both succeed for
+# the test to pass.
+
+test_when_finished () {
+	test_cleanup="{ $*
+		} && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
+}
+
 # Most tests can use the created repository, but some may need to create more.
 # Usage: test_create_repo <directory>
 test_create_repo () {
diff --git a/tag.c b/tag.c
index 4470d2bf78..85607c219e 100644
--- a/tag.c
+++ b/tag.c
@@ -36,43 +36,50 @@ struct tag *lookup_tag(const unsigned char *sha1)
         return (struct tag *) obj;
 }
 
+static unsigned long parse_tag_date(const char *buf, const char *tail)
+{
+	const char *dateptr;
+
+	while (buf < tail && *buf++ != '>')
+		/* nada */;
+	if (buf >= tail)
+		return 0;
+	dateptr = buf;
+	while (buf < tail && *buf++ != '\n')
+		/* nada */;
+	if (buf >= tail)
+		return 0;
+	/* dateptr < buf && buf[-1] == '\n', so strtoul will stop at buf-1 */
+	return strtoul(dateptr, NULL, 10);
+}
+
 int parse_tag_buffer(struct tag *item, void *data, unsigned long size)
 {
-	int typelen, taglen;
 	unsigned char sha1[20];
-	const char *type_line, *tag_line, *sig_line;
 	char type[20];
-	const char *start = data;
+	const char *bufptr = data;
+	const char *tail = bufptr + size;
+	const char *nl;
 
-        if (item->object.parsed)
-                return 0;
-        item->object.parsed = 1;
+	if (item->object.parsed)
+		return 0;
+	item->object.parsed = 1;
 
 	if (size < 64)
 		return -1;
-	if (memcmp("object ", data, 7) || get_sha1_hex((char *) data + 7, sha1))
+	if (memcmp("object ", bufptr, 7) || get_sha1_hex(bufptr + 7, sha1) || bufptr[47] != '\n')
 		return -1;
+	bufptr += 48; /* "object " + sha1 + "\n" */
 
-	type_line = (char *) data + 48;
-	if (memcmp("\ntype ", type_line-1, 6))
+	if (prefixcmp(bufptr, "type "))
 		return -1;
-
-	tag_line = memchr(type_line, '\n', size - (type_line - start));
-	if (!tag_line || memcmp("tag ", ++tag_line, 4))
+	bufptr += 5;
+	nl = memchr(bufptr, '\n', tail - bufptr);
+	if (!nl || sizeof(type) <= (nl - bufptr))
 		return -1;
-
-	sig_line = memchr(tag_line, '\n', size - (tag_line - start));
-	if (!sig_line)
-		return -1;
-	sig_line++;
-
-	typelen = tag_line - type_line - strlen("type \n");
-	if (typelen >= 20)
-		return -1;
-	memcpy(type, type_line + 5, typelen);
-	type[typelen] = '\0';
-	taglen = sig_line - tag_line - strlen("tag \n");
-	item->tag = xmemdupz(tag_line + 4, taglen);
+	strncpy(type, bufptr, nl - bufptr);
+	type[nl - bufptr] = '\0';
+	bufptr = nl + 1;
 
 	if (!strcmp(type, blob_type)) {
 		item->tagged = &lookup_blob(sha1)->object;
@@ -87,6 +94,20 @@ int parse_tag_buffer(struct tag *item, void *data, unsigned long size)
 		item->tagged = NULL;
 	}
 
+	if (prefixcmp(bufptr, "tag "))
+		return -1;
+	bufptr += 4;
+	nl = memchr(bufptr, '\n', tail - bufptr);
+	if (!nl)
+		return -1;
+	item->tag = xmemdupz(bufptr, nl - bufptr);
+	bufptr = nl + 1;
+
+	if (!prefixcmp(bufptr, "tagger "))
+		item->date = parse_tag_date(bufptr, tail);
+	else
+		item->date = 0;
+
 	return 0;
 }
 
diff --git a/tag.h b/tag.h
index 7a0cb0070d..47662724a6 100644
--- a/tag.h
+++ b/tag.h
@@ -9,7 +9,7 @@ struct tag {
 	struct object object;
 	struct object *tagged;
 	char *tag;
-	char *signature; /* not actually implemented */
+	unsigned long date;
 };
 
 extern struct tag *lookup_tag(const unsigned char *sha1);
diff --git a/templates/Makefile b/templates/Makefile
index 408f0137a8..d22a71a399 100644
--- a/templates/Makefile
+++ b/templates/Makefile
@@ -11,6 +11,16 @@ prefix ?= $(HOME)
 template_instdir ?= $(prefix)/share/git-core/templates
 # DESTDIR=
 
+ifndef SHELL_PATH
+	SHELL_PATH = /bin/sh
+endif
+ifndef PERL_PATH
+	PERL_PATH = perl
+endif
+
+SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
+PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
+
 # Shell quote (do not use $(call) to accommodate ancient setups);
 DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
 template_instdir_SQ = $(subst ','\'',$(template_instdir))
@@ -33,8 +43,11 @@ boilerplates.made : $(bpsrc)
 		case "$$boilerplate" in \
 		*--) continue;; \
 		esac && \
-		cp $$boilerplate blt/$$dst && \
-		if test -x "blt/$$dst"; then rx=rx; else rx=r; fi && \
+		sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
+		    -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
+		    -e 's|@PERL_PATH@|$(PERL_PATH_SQ)|g' $$boilerplate > \
+			blt/$$dst && \
+		if test -x "$$boilerplate"; then rx=rx; else rx=r; fi && \
 		chmod a+$$rx "blt/$$dst" || exit; \
 	done && \
 	date >$@
diff --git a/templates/hooks--commit-msg.sample b/templates/hooks--commit-msg.sample
index 6ef1d29d09..b58d1184a9 100755
--- a/templates/hooks--commit-msg.sample
+++ b/templates/hooks--commit-msg.sample
@@ -1,7 +1,7 @@
 #!/bin/sh
 #
 # An example hook script to check the commit log message.
-# Called by git-commit with one argument, the name of the file
+# Called by "git commit" with one argument, the name of the file
 # that has the commit message.  The hook should exit with non-zero
 # status after issuing an appropriate message if it wants to stop the
 # commit.  The hook is allowed to edit the commit message file.
diff --git a/templates/hooks--post-update.sample b/templates/hooks--post-update.sample
index 5323b56b81..ec17ec1939 100755
--- a/templates/hooks--post-update.sample
+++ b/templates/hooks--post-update.sample
@@ -5,4 +5,4 @@
 #
 # To enable this hook, rename this file to "post-update".
 
-exec git-update-server-info
+exec git update-server-info
diff --git a/templates/hooks--pre-commit.sample b/templates/hooks--pre-commit.sample
index 439eefda51..b187c4bb1f 100755
--- a/templates/hooks--pre-commit.sample
+++ b/templates/hooks--pre-commit.sample
@@ -1,13 +1,13 @@
 #!/bin/sh
 #
 # An example hook script to verify what is about to be committed.
-# Called by git-commit with no arguments.  The hook should
+# Called by "git commit" with no arguments.  The hook should
 # exit with non-zero status after issuing an appropriate message if
 # it wants to stop the commit.
 #
 # To enable this hook, rename this file to "pre-commit".
 
-if git-rev-parse --verify HEAD >/dev/null 2>&1
+if git rev-parse --verify HEAD >/dev/null 2>&1
 then
 	against=HEAD
 else
diff --git a/templates/hooks--pre-rebase.sample b/templates/hooks--pre-rebase.sample
index be1b06e250..053f1111c0 100755
--- a/templates/hooks--pre-rebase.sample
+++ b/templates/hooks--pre-rebase.sample
@@ -2,7 +2,7 @@
 #
 # Copyright (c) 2006, 2008 Junio C Hamano
 #
-# The "pre-rebase" hook is run just before "git-rebase" starts doing
+# The "pre-rebase" hook is run just before "git rebase" starts doing
 # its job, and can prevent the command from running by exiting with
 # non-zero status.
 #
@@ -43,7 +43,7 @@ git show-ref -q "$topic" || {
 }
 
 # Is topic fully merged to master?
-not_in_master=`git-rev-list --pretty=oneline ^master "$topic"`
+not_in_master=`git rev-list --pretty=oneline ^master "$topic"`
 if test -z "$not_in_master"
 then
 	echo >&2 "$topic is fully merged to master; better remove it."
@@ -51,11 +51,11 @@ then
 fi
 
 # Is topic ever merged to next?  If so you should not be rebasing it.
-only_next_1=`git-rev-list ^master "^$topic" ${publish} | sort`
-only_next_2=`git-rev-list ^master           ${publish} | sort`
+only_next_1=`git rev-list ^master "^$topic" ${publish} | sort`
+only_next_2=`git rev-list ^master           ${publish} | sort`
 if test "$only_next_1" = "$only_next_2"
 then
-	not_in_topic=`git-rev-list "^$topic" master`
+	not_in_topic=`git rev-list "^$topic" master`
 	if test -z "$not_in_topic"
 	then
 		echo >&2 "$topic is already up-to-date with master"
@@ -64,8 +64,8 @@ then
 		exit 0
 	fi
 else
-	not_in_next=`git-rev-list --pretty=oneline ^${publish} "$topic"`
-	perl -e '
+	not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"`
+	@PERL_PATH@ -e '
 		my $topic = $ARGV[0];
 		my $msg = "* $topic has commits already merged to public branch:\n";
 		my (%not_in_next) = map {
@@ -157,13 +157,13 @@ B to be deleted.
 
 To compute (1):
 
-	git-rev-list ^master ^topic next
-	git-rev-list ^master        next
+	git rev-list ^master ^topic next
+	git rev-list ^master        next
 
 	if these match, topic has not merged in next at all.
 
 To compute (2):
 
-	git-rev-list master..topic
+	git rev-list master..topic
 
 	if this is empty, it is fully merged to "master".
diff --git a/templates/hooks--prepare-commit-msg.sample b/templates/hooks--prepare-commit-msg.sample
index 365242499d..86b8f227ec 100755
--- a/templates/hooks--prepare-commit-msg.sample
+++ b/templates/hooks--prepare-commit-msg.sample
@@ -1,7 +1,7 @@
 #!/bin/sh
 #
 # An example hook script to prepare the commit log message.
-# Called by git-commit with the name of the file that has the
+# Called by "git commit" with the name of the file that has the
 # commit message, followed by the description of the commit
 # message's source.  The hook's purpose is to edit the commit
 # message file.  If the hook fails with a non-zero status,
@@ -22,10 +22,10 @@
 
 case "$2,$3" in
   merge,)
-    perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;;
+    @PERL_PATH@ -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;;
 
 # ,|template,)
-#   perl -i.bak -pe '
+#   @PERL_PATH@ -i.bak -pe '
 #      print "\n" . `git diff --cached --name-status -r`
 #	 if /^#/ && $first++ == 0' "$1" ;;
 
diff --git a/templates/hooks--update.sample b/templates/hooks--update.sample
index fd63b2d662..71ab04edc0 100755
--- a/templates/hooks--update.sample
+++ b/templates/hooks--update.sample
@@ -1,7 +1,7 @@
 #!/bin/sh
 #
 # An example hook script to blocks unannotated tags from entering.
-# Called by git-receive-pack with arguments: refname sha1-old sha1-new
+# Called by "git receive-pack" with arguments: refname sha1-old sha1-new
 #
 # To enable this hook, rename this file to "update".
 #
@@ -64,7 +64,7 @@ zero="0000000000000000000000000000000000000000"
 if [ "$newrev" = "$zero" ]; then
 	newrev_type=delete
 else
-	newrev_type=$(git-cat-file -t $newrev)
+	newrev_type=$(git cat-file -t $newrev)
 fi
 
 case "$refname","$newrev_type" in
diff --git a/templates/info--exclude b/templates/info--exclude
index 2c87b72dff..a5196d1be8 100644
--- a/templates/info--exclude
+++ b/templates/info--exclude
@@ -1,4 +1,4 @@
-# git-ls-files --others --exclude-from=.git/info/exclude
+# git ls-files --others --exclude-from=.git/info/exclude
 # Lines that start with '#' are comments.
 # For a project mostly in C, the following would be a good set of
 # exclude patterns (uncomment them if you want to use them):
diff --git a/thread-utils.c b/thread-utils.c
index 4f9c829c2d..589f838f82 100644
--- a/thread-utils.c
+++ b/thread-utils.c
@@ -1,4 +1,5 @@
 #include "cache.h"
+#include <pthread.h>
 
 #if defined(hpux) || defined(__hpux) || defined(_hpux)
 #  include <sys/pstat.h>
@@ -43,3 +44,18 @@ int online_cpus(void)
 
 	return 1;
 }
+
+int init_recursive_mutex(pthread_mutex_t *m)
+{
+	pthread_mutexattr_t a;
+	int ret;
+
+	ret = pthread_mutexattr_init(&a);
+	if (!ret) {
+		ret = pthread_mutexattr_settype(&a, PTHREAD_MUTEX_RECURSIVE);
+		if (!ret)
+			ret = pthread_mutex_init(m, &a);
+		pthread_mutexattr_destroy(&a);
+	}
+	return ret;
+}
diff --git a/thread-utils.h b/thread-utils.h
index cce4b77bd6..1727a03333 100644
--- a/thread-utils.h
+++ b/thread-utils.h
@@ -2,5 +2,6 @@
 #define THREAD_COMPAT_H
 
 extern int online_cpus(void);
+extern int init_recursive_mutex(pthread_mutex_t*);
 
 #endif /* THREAD_COMPAT_H */
diff --git a/transport-helper.c b/transport-helper.c
index f822972020..2638781c5b 100644
--- a/transport-helper.c
+++ b/transport-helper.c
@@ -279,9 +279,8 @@ static void standard_options(struct transport *t)
 	char buf[16];
 	int n;
 	int v = t->verbose;
-	int no_progress = v < 0 || (!t->progress && !isatty(2));
 
-	set_helper_option(t, "progress", !no_progress ? "true" : "false");
+	set_helper_option(t, "progress", t->progress ? "true" : "false");
 
 	n = snprintf(buf, sizeof(buf), "%d", v + 1);
 	if (n >= sizeof(buf))
@@ -576,7 +575,6 @@ static int push_refs(struct transport *transport,
 	if (buf.len == 0)
 		return 0;
 
-	transport->verbose = flags & TRANSPORT_PUSH_VERBOSE ? 1 : 0;
 	standard_options(transport);
 
 	if (flags & TRANSPORT_PUSH_DRY_RUN) {
diff --git a/transport.c b/transport.c
index 08e4fa0354..8ce39364a1 100644
--- a/transport.c
+++ b/transport.c
@@ -526,7 +526,7 @@ static int fetch_refs_via_pack(struct transport *transport,
 	args.include_tag = data->options.followtags;
 	args.verbose = (transport->verbose > 0);
 	args.quiet = (transport->verbose < 0);
-	args.no_progress = args.quiet || (!transport->progress && !isatty(2));
+	args.no_progress = !transport->progress;
 	args.depth = data->options.depth;
 
 	for (i = 0; i < nr_heads; i++)
@@ -573,7 +573,7 @@ static int push_had_errors(struct ref *ref)
 	return 0;
 }
 
-static int refs_pushed(struct ref *ref)
+int transport_refs_pushed(struct ref *ref)
 {
 	for (; ref; ref = ref->next) {
 		switch(ref->status) {
@@ -587,7 +587,7 @@ static int refs_pushed(struct ref *ref)
 	return 0;
 }
 
-static void update_tracking_ref(struct remote *remote, struct ref *ref, int verbose)
+void transport_update_tracking_ref(struct remote *remote, struct ref *ref, int verbose)
 {
 	struct refspec rs;
 
@@ -609,8 +609,6 @@ static void update_tracking_ref(struct remote *remote, struct ref *ref, int verb
 	}
 }
 
-#define SUMMARY_WIDTH (2 * DEFAULT_ABBREV + 3)
-
 static void print_ref_status(char flag, const char *summary, struct ref *to, struct ref *from, const char *msg, int porcelain)
 {
 	if (porcelain) {
@@ -623,7 +621,7 @@ static void print_ref_status(char flag, const char *summary, struct ref *to, str
 		else
 			fprintf(stdout, "%s\n", summary);
 	} else {
-		fprintf(stderr, " %c %-*s ", flag, SUMMARY_WIDTH, summary);
+		fprintf(stderr, " %c %-*s ", flag, TRANSPORT_SUMMARY_WIDTH, summary);
 		if (from)
 			fprintf(stderr, "%s -> %s", prettify_refname(from->name), prettify_refname(to->name));
 		else
@@ -675,7 +673,7 @@ static void print_ok_ref_status(struct ref *ref, int porcelain)
 static int print_one_push_status(struct ref *ref, const char *dest, int count, int porcelain)
 {
 	if (!count)
-		fprintf(stderr, "To %s\n", dest);
+		fprintf(porcelain ? stdout : stderr, "To %s\n", dest);
 
 	switch(ref->status) {
 	case REF_STATUS_NONE:
@@ -711,8 +709,8 @@ static int print_one_push_status(struct ref *ref, const char *dest, int count, i
 	return 1;
 }
 
-static void print_push_status(const char *dest, struct ref *refs,
-			      int verbose, int porcelain, int * nonfastforward)
+void transport_print_push_status(const char *dest, struct ref *refs,
+				  int verbose, int porcelain, int *nonfastforward)
 {
 	struct ref *ref;
 	int n = 0;
@@ -738,7 +736,7 @@ static void print_push_status(const char *dest, struct ref *refs,
 	}
 }
 
-static void verify_remote_names(int nr_heads, const char **heads)
+void transport_verify_remote_names(int nr_heads, const char **heads)
 {
 	int i;
 
@@ -788,9 +786,10 @@ static int git_transport_push(struct transport *transport, struct ref *remote_re
 	args.send_mirror = !!(flags & TRANSPORT_PUSH_MIRROR);
 	args.force_update = !!(flags & TRANSPORT_PUSH_FORCE);
 	args.use_thin_pack = data->options.thin;
-	args.verbose = !!(flags & TRANSPORT_PUSH_VERBOSE);
-	args.quiet = !!(flags & TRANSPORT_PUSH_QUIET);
+	args.verbose = (transport->verbose > 0);
+	args.quiet = (transport->verbose < 0);
 	args.dry_run = !!(flags & TRANSPORT_PUSH_DRY_RUN);
+	args.porcelain = !!(flags & TRANSPORT_PUSH_PORCELAIN);
 
 	ret = send_pack(&args, data->fd, data->conn, remote_refs,
 			&data->extra_have);
@@ -872,6 +871,21 @@ static int is_file(const char *url)
 	return S_ISREG(buf.st_mode);
 }
 
+static int isurlschemechar(int first_flag, int ch)
+{
+	/*
+	 * The set of valid URL schemes, as per STD66 (RFC3986) is
+	 * '[A-Za-z][A-Za-z0-9+.-]*'. But use sightly looser check
+	 * of '[A-Za-z0-9][A-Za-z0-9+.-]*' because earlier version
+	 * of check used '[A-Za-z0-9]+' so not to break any remote
+	 * helpers.
+	 */
+	int alphanumeric, special;
+	alphanumeric = ch > 0 && isalnum(ch);
+	special = ch == '+' || ch == '-' || ch == '.';
+	return alphanumeric || (!first_flag && special);
+}
+
 static int is_url(const char *url)
 {
 	const char *url2, *first_slash;
@@ -896,7 +910,7 @@ static int is_url(const char *url)
 	 */
 	url2 = url;
 	while (url2 < first_slash - 1) {
-		if (!isalnum((unsigned char)*url2))
+		if (!isurlschemechar(url2 == url, (unsigned char)*url2))
 			return 0;
 		url2++;
 	}
@@ -915,6 +929,8 @@ struct transport *transport_get(struct remote *remote, const char *url)
 	const char *helper;
 	struct transport *ret = xcalloc(1, sizeof(*ret));
 
+	ret->progress = isatty(2);
+
 	if (!remote)
 		die("No remote provided to transport_get()");
 
@@ -930,7 +946,7 @@ struct transport *transport_get(struct remote *remote, const char *url)
 	if (url) {
 		const char *p = url;
 
-		while (isalnum(*p))
+		while (isurlschemechar(p == url, *p))
 			p++;
 		if (!prefixcmp(p, "::"))
 			helper = xstrndup(url, p - url);
@@ -1014,12 +1030,31 @@ int transport_set_option(struct transport *transport,
 	return 1;
 }
 
+void transport_set_verbosity(struct transport *transport, int verbosity,
+	int force_progress)
+{
+	if (verbosity >= 2)
+		transport->verbose = verbosity <= 3 ? verbosity : 3;
+	if (verbosity < 0)
+		transport->verbose = -1;
+
+	/**
+	 * Rules used to determine whether to report progress (processing aborts
+	 * when a rule is satisfied):
+	 *
+	 *   1. Report progress, if force_progress is 1 (ie. --progress).
+	 *   2. Don't report progress, if verbosity < 0 (ie. -q/--quiet ).
+	 *   3. Report progress if isatty(2) is 1.
+	 **/
+	transport->progress = force_progress || (verbosity >= 0 && isatty(2));
+}
+
 int transport_push(struct transport *transport,
 		   int refspec_nr, const char **refspec, int flags,
 		   int *nonfastforward)
 {
 	*nonfastforward = 0;
-	verify_remote_names(refspec_nr, refspec);
+	transport_verify_remote_names(refspec_nr, refspec);
 
 	if (transport->push) {
 		/* Maybe FIXME. But no important transport uses this case. */
@@ -1032,11 +1067,11 @@ int transport_push(struct transport *transport,
 			transport->get_refs_list(transport, 1);
 		struct ref *local_refs = get_local_heads();
 		int match_flags = MATCH_REFS_NONE;
-		int verbose = flags & TRANSPORT_PUSH_VERBOSE;
-		int quiet = flags & TRANSPORT_PUSH_QUIET;
+		int verbose = (transport->verbose > 0);
+		int quiet = (transport->verbose < 0);
 		int porcelain = flags & TRANSPORT_PUSH_PORCELAIN;
 		int pretend = flags & TRANSPORT_PUSH_DRY_RUN;
-		int ret, err;
+		int push_ret, ret, err;
 
 		if (flags & TRANSPORT_PUSH_ALL)
 			match_flags |= MATCH_REFS_ALL;
@@ -1052,13 +1087,12 @@ int transport_push(struct transport *transport,
 			flags & TRANSPORT_PUSH_MIRROR,
 			flags & TRANSPORT_PUSH_FORCE);
 
-		ret = transport->push_refs(transport, remote_refs, flags);
+		push_ret = transport->push_refs(transport, remote_refs, flags);
 		err = push_had_errors(remote_refs);
-
-		ret |= err;
+		ret = push_ret | err;
 
 		if (!quiet || err)
-			print_push_status(transport->url, remote_refs,
+			transport_print_push_status(transport->url, remote_refs,
 					verbose | porcelain, porcelain,
 					nonfastforward);
 
@@ -1068,11 +1102,14 @@ int transport_push(struct transport *transport,
 		if (!(flags & TRANSPORT_PUSH_DRY_RUN)) {
 			struct ref *ref;
 			for (ref = remote_refs; ref; ref = ref->next)
-				update_tracking_ref(transport->remote, ref, verbose);
+				transport_update_tracking_ref(transport->remote, ref, verbose);
 		}
 
-		if (!quiet && !ret && !refs_pushed(remote_refs))
+		if (porcelain && !push_ret)
+			puts("Done");
+		else if (!quiet && !ret && !transport_refs_pushed(remote_refs))
 			fprintf(stderr, "Everything up-to-date\n");
+
 		return ret;
 	}
 	return 1;
diff --git a/transport.h b/transport.h
index 6dd9ae182f..c59d97388e 100644
--- a/transport.h
+++ b/transport.h
@@ -80,7 +80,12 @@ struct transport {
 	int (*disconnect)(struct transport *connection);
 	char *pack_lockfile;
 	signed verbose : 3;
-	/* Force progress even if stderr is not a tty */
+	/**
+	 * Transports should not set this directly, and should use this
+	 * value without having to check isatty(2), -q/--quiet
+	 * (transport->verbose < 0), etc. - checking has already been done
+	 * in transport_set_verbosity().
+	 **/
 	unsigned progress : 1;
 	/*
 	 * If transport is at least potentially smart, this points to
@@ -94,10 +99,10 @@ struct transport {
 #define TRANSPORT_PUSH_FORCE 2
 #define TRANSPORT_PUSH_DRY_RUN 4
 #define TRANSPORT_PUSH_MIRROR 8
-#define TRANSPORT_PUSH_VERBOSE 16
-#define TRANSPORT_PUSH_PORCELAIN 32
-#define TRANSPORT_PUSH_QUIET 64
-#define TRANSPORT_PUSH_SET_UPSTREAM 128
+#define TRANSPORT_PUSH_PORCELAIN 16
+#define TRANSPORT_PUSH_SET_UPSTREAM 32
+
+#define TRANSPORT_SUMMARY_WIDTH (2 * DEFAULT_ABBREV + 3)
 
 /* Returns a transport suitable for the url */
 struct transport *transport_get(struct remote *, const char *);
@@ -128,6 +133,8 @@ struct transport *transport_get(struct remote *, const char *);
  **/
 int transport_set_option(struct transport *transport, const char *name,
 			 const char *value);
+void transport_set_verbosity(struct transport *transport, int verbosity,
+	int force_progress);
 
 int transport_push(struct transport *connection,
 		   int refspec_nr, const char **refspec, int flags,
@@ -148,4 +155,14 @@ int transport_connect(struct transport *transport, const char *name,
 /* Transport methods defined outside transport.c */
 int transport_helper_init(struct transport *transport, const char *name);
 
+/* common methods used by transport.c and builtin-send-pack.c */
+void transport_verify_remote_names(int nr_heads, const char **heads);
+
+void transport_update_tracking_ref(struct remote *remote, struct ref *ref, int verbose);
+
+int transport_refs_pushed(struct ref *ref);
+
+void transport_print_push_status(const char *dest, struct ref *refs,
+		  int verbose, int porcelain, int *nonfastforward);
+
 #endif
diff --git a/unpack-trees.c b/unpack-trees.c
index 75f54cac97..490cd5f6f4 100644
--- a/unpack-trees.c
+++ b/unpack-trees.c
@@ -67,16 +67,8 @@ static void unlink_entry(struct cache_entry *ce)
 {
 	if (has_symlink_or_noent_leading_path(ce->name, ce_namelen(ce)))
 		return;
-	if (S_ISGITLINK(ce->ce_mode)) {
-		if (rmdir(ce->name)) {
-			warning("unable to rmdir %s: %s",
-				ce->name, strerror(errno));
-			return;
-		}
-	}
-	else
-		if (unlink_or_warn(ce->name))
-			return;
+	if (remove_or_warn(ce->ce_mode, ce->name))
+		return;
 	schedule_dir_for_removal(ce->name, ce_namelen(ce));
 }
 
@@ -862,7 +854,7 @@ static int verify_uptodate_1(struct cache_entry *ce,
 {
 	struct stat st;
 
-	if (o->index_only || (!ce_skip_worktree(ce) && (o->reset || ce_uptodate(ce))))
+	if (o->index_only || (!((ce->ce_flags & CE_VALID) || ce_skip_worktree(ce)) && (o->reset || ce_uptodate(ce))))
 		return 0;
 
 	if (!lstat(ce->name, &st)) {
diff --git a/userdiff.c b/userdiff.c
index df992490d5..38563daa3c 100644
--- a/userdiff.c
+++ b/userdiff.c
@@ -44,7 +44,9 @@ PATTERNS("pascal",
 	 "|[-+0-9.e]+|0[xXbB]?[0-9a-fA-F]+"
 	 "|<>|<=|>=|:=|\\.\\."
 	 "|[^[:space:]]|[\x80-\xff]+"),
-PATTERNS("php", "^[\t ]*((function|class).*)",
+PATTERNS("php",
+	 "^[\t ]*(((public|protected|private|static)[\t ]+)*function.*)$\n"
+	 "^[\t ]*(class.*)$",
 	 /* -- */
 	 "[a-zA-Z_][a-zA-Z0-9_]*"
 	 "|[-+0-9.e]+|0[xXbB]?[0-9a-fA-F]+"
diff --git a/walker.h b/walker.h
index 8a149e1108..95e5765484 100644
--- a/walker.h
+++ b/walker.h
@@ -34,6 +34,6 @@ int walker_fetch(struct walker *impl, int targets, char **target,
 
 void walker_free(struct walker *walker);
 
-struct walker *get_http_walker(const char *url, struct remote *remote);
+struct walker *get_http_walker(const char *url);
 
 #endif /* WALKER_H */
diff --git a/wrap-for-bin.sh b/wrap-for-bin.sh
index c5075c9c61..09feb1f737 100644
--- a/wrap-for-bin.sh
+++ b/wrap-for-bin.sh
@@ -7,9 +7,15 @@
 # @@BUILD_DIR@@ and @@PROG@@.
 
 GIT_EXEC_PATH='@@BUILD_DIR@@'
-GIT_TEMPLATE_DIR='@@BUILD_DIR@@/templates/blt'
+if test -n "$NO_SET_GIT_TEMPLATE_DIR"
+then
+	unset GIT_TEMPLATE_DIR
+else
+	GIT_TEMPLATE_DIR='@@BUILD_DIR@@/templates/blt'
+	export GIT_TEMPLATE_DIR
+fi
 GITPERLLIB='@@BUILD_DIR@@/perl/blib/lib'
 PATH='@@BUILD_DIR@@/bin-wrappers:'"$PATH"
-export GIT_EXEC_PATH GIT_TEMPLATE_DIR GITPERLLIB PATH
+export GIT_EXEC_PATH GITPERLLIB PATH
 
 exec "${GIT_EXEC_PATH}/@@PROG@@" "$@"
diff --git a/wrapper.c b/wrapper.c
index 9c71b21242..58201b6bcb 100644
--- a/wrapper.c
+++ b/wrapper.c
@@ -3,11 +3,23 @@
  */
 #include "cache.h"
 
+static void try_to_free_builtin(size_t size)
+{
+	release_pack_memory(size, -1);
+}
+
+static void (*try_to_free_routine)(size_t size) = try_to_free_builtin;
+
+void set_try_to_free_routine(void (*routine)(size_t))
+{
+	try_to_free_routine = (routine) ? routine : try_to_free_builtin;
+}
+
 char *xstrdup(const char *str)
 {
 	char *ret = strdup(str);
 	if (!ret) {
-		release_pack_memory(strlen(str) + 1, -1);
+		try_to_free_routine(strlen(str) + 1);
 		ret = strdup(str);
 		if (!ret)
 			die("Out of memory, strdup failed");
@@ -21,7 +33,7 @@ void *xmalloc(size_t size)
 	if (!ret && !size)
 		ret = malloc(1);
 	if (!ret) {
-		release_pack_memory(size, -1);
+		try_to_free_routine(size);
 		ret = malloc(size);
 		if (!ret && !size)
 			ret = malloc(1);
@@ -67,7 +79,7 @@ void *xrealloc(void *ptr, size_t size)
 	if (!ret && !size)
 		ret = realloc(ptr, 1);
 	if (!ret) {
-		release_pack_memory(size, -1);
+		try_to_free_routine(size);
 		ret = realloc(ptr, size);
 		if (!ret && !size)
 			ret = realloc(ptr, 1);
@@ -83,7 +95,7 @@ void *xcalloc(size_t nmemb, size_t size)
 	if (!ret && (!nmemb || !size))
 		ret = calloc(1, 1);
 	if (!ret) {
-		release_pack_memory(nmemb * size, -1);
+		try_to_free_routine(nmemb * size);
 		ret = calloc(nmemb, size);
 		if (!ret && (!nmemb || !size))
 			ret = calloc(1, 1);
@@ -311,18 +323,30 @@ int odb_pack_keep(char *name, size_t namesz, unsigned char *sha1)
 	return open(name, O_RDWR|O_CREAT|O_EXCL, 0600);
 }
 
-int unlink_or_warn(const char *file)
+static int warn_if_unremovable(const char *op, const char *file, int rc)
 {
-	int rc = unlink(file);
-
 	if (rc < 0) {
 		int err = errno;
 		if (ENOENT != err) {
-			warning("unable to unlink %s: %s",
-				file, strerror(errno));
+			warning("unable to %s %s: %s",
+				op, file, strerror(errno));
 			errno = err;
 		}
 	}
 	return rc;
 }
 
+int unlink_or_warn(const char *file)
+{
+	return warn_if_unremovable("unlink", file, unlink(file));
+}
+
+int rmdir_or_warn(const char *file)
+{
+	return warn_if_unremovable("rmdir", file, rmdir(file));
+}
+
+int remove_or_warn(unsigned int mode, const char *file)
+{
+	return S_ISGITLINK(mode) ? rmdir_or_warn(file) : unlink_or_warn(file);
+}
diff --git a/wt-status.c b/wt-status.c
index 5807fc3211..d44486c826 100644
--- a/wt-status.c
+++ b/wt-status.c
@@ -78,7 +78,8 @@ static void wt_status_print_cached_header(struct wt_status *s)
 }
 
 static void wt_status_print_dirty_header(struct wt_status *s,
-					 int has_deleted)
+					 int has_deleted,
+					 int has_dirty_submodules)
 {
 	const char *c = color(WT_STATUS_HEADER, s);
 
@@ -90,6 +91,8 @@ static void wt_status_print_dirty_header(struct wt_status *s,
 	else
 		color_fprintf_ln(s->fp, c, "#   (use \"git add/rm <file>...\" to update what will be committed)");
 	color_fprintf_ln(s->fp, c, "#   (use \"git checkout -- <file>...\" to discard changes in working directory)");
+	if (has_dirty_submodules)
+		color_fprintf_ln(s->fp, c, "#   (commit or discard the untracked or modified content in submodules)");
 	color_fprintf_ln(s->fp, c, "#");
 }
 
@@ -144,6 +147,7 @@ static void wt_status_print_change_data(struct wt_status *s,
 	char *two_name;
 	const char *one, *two;
 	struct strbuf onebuf = STRBUF_INIT, twobuf = STRBUF_INIT;
+	struct strbuf extra = STRBUF_INIT;
 
 	one_name = two_name = it->string;
 	switch (change_type) {
@@ -153,6 +157,17 @@ static void wt_status_print_change_data(struct wt_status *s,
 			one_name = d->head_path;
 		break;
 	case WT_STATUS_CHANGED:
+		if (d->new_submodule_commits || d->dirty_submodule) {
+			strbuf_addstr(&extra, " (");
+			if (d->new_submodule_commits)
+				strbuf_addf(&extra, "new commits, ");
+			if (d->dirty_submodule & DIRTY_SUBMODULE_MODIFIED)
+				strbuf_addf(&extra, "modified content, ");
+			if (d->dirty_submodule & DIRTY_SUBMODULE_UNTRACKED)
+				strbuf_addf(&extra, "untracked content, ");
+			strbuf_setlen(&extra, extra.len - 2);
+			strbuf_addch(&extra, ')');
+		}
 		status = d->worktree_status;
 		break;
 	}
@@ -189,6 +204,10 @@ static void wt_status_print_change_data(struct wt_status *s,
 	default:
 		die("bug: unhandled diff status %c", status);
 	}
+	if (extra.len) {
+		color_fprintf(s->fp, color(WT_STATUS_HEADER, s), "%s", extra.buf);
+		strbuf_release(&extra);
+	}
 	fprintf(s->fp, "\n");
 	strbuf_release(&onebuf);
 	strbuf_release(&twobuf);
@@ -218,6 +237,9 @@ static void wt_status_collect_changed_cb(struct diff_queue_struct *q,
 		}
 		if (!d->worktree_status)
 			d->worktree_status = p->status;
+		d->dirty_submodule = p->two->dirty_submodule;
+		if (S_ISGITLINK(p->two->mode))
+			d->new_submodule_commits = !!hashcmp(p->one->sha1, p->two->sha1);
 	}
 }
 
@@ -281,6 +303,9 @@ static void wt_status_collect_changes_worktree(struct wt_status *s)
 	init_revisions(&rev, NULL);
 	setup_revisions(0, NULL, &rev, NULL);
 	rev.diffopt.output_format |= DIFF_FORMAT_CALLBACK;
+	DIFF_OPT_SET(&rev.diffopt, DIRTY_SUBMODULES);
+	if (!s->show_untracked_files)
+		DIFF_OPT_SET(&rev.diffopt, IGNORE_UNTRACKED_IN_SUBMODULES);
 	rev.diffopt.format_callback = wt_status_collect_changed_cb;
 	rev.diffopt.format_callback_data = s;
 	rev.prune_data = s->pathspec;
@@ -290,10 +315,13 @@ static void wt_status_collect_changes_worktree(struct wt_status *s)
 static void wt_status_collect_changes_index(struct wt_status *s)
 {
 	struct rev_info rev;
+	struct setup_revision_opt opt;
 
 	init_revisions(&rev, NULL);
-	setup_revisions(0, NULL, &rev,
-		s->is_initial ? EMPTY_TREE_SHA1_HEX : s->reference);
+	memset(&opt, 0, sizeof(opt));
+	opt.def = s->is_initial ? EMPTY_TREE_SHA1_HEX : s->reference;
+	setup_revisions(0, NULL, &rev, &opt);
+
 	rev.diffopt.output_format |= DIFF_FORMAT_CALLBACK;
 	rev.diffopt.format_callback = wt_status_collect_updated_cb;
 	rev.diffopt.format_callback_data = s;
@@ -418,33 +446,39 @@ static void wt_status_print_updated(struct wt_status *s)
  *  0 : no change
  *  1 : some change but no delete
  */
-static int wt_status_check_worktree_changes(struct wt_status *s)
+static int wt_status_check_worktree_changes(struct wt_status *s,
+					     int *dirty_submodules)
 {
 	int i;
 	int changes = 0;
 
+	*dirty_submodules = 0;
+
 	for (i = 0; i < s->change.nr; i++) {
 		struct wt_status_change_data *d;
 		d = s->change.items[i].util;
 		if (!d->worktree_status ||
 		    d->worktree_status == DIFF_STATUS_UNMERGED)
 			continue;
-		changes = 1;
+		if (!changes)
+			changes = 1;
+		if (d->dirty_submodule)
+			*dirty_submodules = 1;
 		if (d->worktree_status == DIFF_STATUS_DELETED)
-			return -1;
+			changes = -1;
 	}
 	return changes;
 }
 
 static void wt_status_print_changed(struct wt_status *s)
 {
-	int i;
-	int worktree_changes = wt_status_check_worktree_changes(s);
+	int i, dirty_submodules;
+	int worktree_changes = wt_status_check_worktree_changes(s, &dirty_submodules);
 
 	if (!worktree_changes)
 		return;
 
-	wt_status_print_dirty_header(s, worktree_changes < 0);
+	wt_status_print_dirty_header(s, worktree_changes < 0, dirty_submodules);
 
 	for (i = 0; i < s->change.nr; i++) {
 		struct wt_status_change_data *d;
@@ -512,11 +546,15 @@ static void wt_status_print_untracked(struct wt_status *s)
 static void wt_status_print_verbose(struct wt_status *s)
 {
 	struct rev_info rev;
+	struct setup_revision_opt opt;
 
 	init_revisions(&rev, NULL);
 	DIFF_OPT_SET(&rev.diffopt, ALLOW_TEXTCONV);
-	setup_revisions(0, NULL, &rev,
-		s->is_initial ? EMPTY_TREE_SHA1_HEX : s->reference);
+
+	memset(&opt, 0, sizeof(opt));
+	opt.def = s->is_initial ? EMPTY_TREE_SHA1_HEX : s->reference;
+	setup_revisions(0, NULL, &rev, &opt);
+
 	rev.diffopt.output_format |= DIFF_FORMAT_PATCH;
 	rev.diffopt.detect_rename = 1;
 	rev.diffopt.file = s->fp;
@@ -587,7 +625,9 @@ void wt_status_print(struct wt_status *s)
 	if (s->show_untracked_files)
 		wt_status_print_untracked(s);
 	else if (s->commitable)
-		 fprintf(s->fp, "# Untracked files not listed (use -u option to show untracked files)\n");
+		fprintf(s->fp, "# Untracked files not listed%s\n",
+			advice_status_hints
+			? " (use -u option to show untracked files)" : "");
 
 	if (s->verbose)
 		wt_status_print_verbose(s);
@@ -597,15 +637,22 @@ void wt_status_print(struct wt_status *s)
 		else if (s->nowarn)
 			; /* nothing */
 		else if (s->workdir_dirty)
-			printf("no changes added to commit (use \"git add\" and/or \"git commit -a\")\n");
+			printf("no changes added to commit%s\n",
+				advice_status_hints
+				? " (use \"git add\" and/or \"git commit -a\")" : "");
 		else if (s->untracked.nr)
-			printf("nothing added to commit but untracked files present (use \"git add\" to track)\n");
+			printf("nothing added to commit but untracked files present%s\n",
+				advice_status_hints
+				? " (use \"git add\" to track)" : "");
 		else if (s->is_initial)
-			printf("nothing to commit (create/copy files and use \"git add\" to track)\n");
+			printf("nothing to commit%s\n", advice_status_hints
+				? " (create/copy files and use \"git add\" to track)" : "");
 		else if (!s->show_untracked_files)
-			printf("nothing to commit (use -u to show untracked files)\n");
+			printf("nothing to commit%s\n", advice_status_hints
+				? " (use -u to show untracked files)" : "");
 		else
-			printf("nothing to commit (working directory clean)\n");
+			printf("nothing to commit%s\n", advice_status_hints
+				? " (working directory clean)" : "");
 	}
 }
 
diff --git a/wt-status.h b/wt-status.h
index c60f40a34a..91206739f3 100644
--- a/wt-status.h
+++ b/wt-status.h
@@ -25,6 +25,8 @@ struct wt_status_change_data {
 	int index_status;
 	int stagemask;
 	char *head_path;
+	unsigned dirty_submodule       : 2;
+	unsigned new_submodule_commits : 1;
 };
 
 struct wt_status {
diff --git a/xdiff-interface.c b/xdiff-interface.c
index 01f14fb50f..cd2285de1c 100644
--- a/xdiff-interface.c
+++ b/xdiff-interface.c
@@ -138,19 +138,20 @@ int xdi_diff(mmfile_t *mf1, mmfile_t *mf2, xpparam_t const *xpp, xdemitconf_t co
 
 int xdi_diff_outf(mmfile_t *mf1, mmfile_t *mf2,
 		  xdiff_emit_consume_fn fn, void *consume_callback_data,
-		  xpparam_t const *xpp,
-		  xdemitconf_t const *xecfg, xdemitcb_t *xecb)
+		  xpparam_t const *xpp, xdemitconf_t const *xecfg)
 {
 	int ret;
 	struct xdiff_emit_state state;
+	xdemitcb_t ecb;
 
 	memset(&state, 0, sizeof(state));
 	state.consume = fn;
 	state.consume_callback_data = consume_callback_data;
-	xecb->outf = xdiff_outf;
-	xecb->priv = &state;
+	memset(&ecb, 0, sizeof(ecb));
+	ecb.outf = xdiff_outf;
+	ecb.priv = &state;
 	strbuf_init(&state.remainder, 0);
-	ret = xdi_diff(mf1, mf2, xpp, xecfg, xecb);
+	ret = xdi_diff(mf1, mf2, xpp, xecfg, &ecb);
 	strbuf_release(&state.remainder);
 	return ret;
 }
@@ -218,6 +219,23 @@ int read_mmfile(mmfile_t *ptr, const char *filename)
 	return 0;
 }
 
+void read_mmblob(mmfile_t *ptr, const unsigned char *sha1)
+{
+	unsigned long size;
+	enum object_type type;
+
+	if (!hashcmp(sha1, null_sha1)) {
+		ptr->ptr = xstrdup("");
+		ptr->size = 0;
+		return;
+	}
+
+	ptr->ptr = read_sha1_file(sha1, &type, &size);
+	if (!ptr->ptr || type != OBJ_BLOB)
+		die("unable to read blob object %s", sha1_to_hex(sha1));
+	ptr->size = size;
+}
+
 #define FIRST_FEW_BYTES 8000
 int buffer_is_binary(const char *ptr, unsigned long size)
 {
diff --git a/xdiff-interface.h b/xdiff-interface.h
index 55572c39a1..49d1116fc3 100644
--- a/xdiff-interface.h
+++ b/xdiff-interface.h
@@ -9,8 +9,7 @@ typedef void (*xdiff_emit_hunk_consume_fn)(void *, long, long, long);
 int xdi_diff(mmfile_t *mf1, mmfile_t *mf2, xpparam_t const *xpp, xdemitconf_t const *xecfg, xdemitcb_t *ecb);
 int xdi_diff_outf(mmfile_t *mf1, mmfile_t *mf2,
 		  xdiff_emit_consume_fn fn, void *consume_callback_data,
-		  xpparam_t const *xpp,
-		  xdemitconf_t const *xecfg, xdemitcb_t *xecb);
+		  xpparam_t const *xpp, xdemitconf_t const *xecfg);
 int xdi_diff_hunks(mmfile_t *mf1, mmfile_t *mf2,
 		   xdiff_emit_hunk_consume_fn fn, void *consume_callback_data,
 		   xpparam_t const *xpp, xdemitconf_t *xecfg);
@@ -18,6 +17,7 @@ int parse_hunk_header(char *line, int len,
 		      int *ob, int *on,
 		      int *nb, int *nn);
 int read_mmfile(mmfile_t *ptr, const char *filename);
+void read_mmblob(mmfile_t *ptr, const unsigned char *sha1);
 int buffer_is_binary(const char *ptr, unsigned long size);
 
 extern void xdiff_set_find_func(xdemitconf_t *xecfg, const char *line, int cflags);
diff --git a/xdiff/xdiff.h b/xdiff/xdiff.h
index 3f6229edbe..711048ea36 100644
--- a/xdiff/xdiff.h
+++ b/xdiff/xdiff.h
@@ -56,17 +56,14 @@ extern "C" {
 #define XDL_MERGE_EAGER 1
 #define XDL_MERGE_ZEALOUS 2
 #define XDL_MERGE_ZEALOUS_ALNUM 3
-#define XDL_MERGE_LEVEL_MASK 0x0f
 
 /* merge favor modes */
 #define XDL_MERGE_FAVOR_OURS 1
 #define XDL_MERGE_FAVOR_THEIRS 2
-#define XDL_MERGE_FAVOR(flags) (((flags)>>4) & 3)
-#define XDL_MERGE_FLAGS(level, style, favor) ((level)|(style)|((favor)<<4))
+#define XDL_MERGE_FAVOR_UNION 3
 
 /* merge output styles */
-#define XDL_MERGE_DIFF3 0x8000
-#define XDL_MERGE_STYLE_MASK 0x8000
+#define XDL_MERGE_DIFF3 1
 
 typedef struct s_mmfile {
 	char *ptr;
@@ -117,13 +114,18 @@ int xdl_diff(mmfile_t *mf1, mmfile_t *mf2, xpparam_t const *xpp,
 typedef struct s_xmparam {
 	xpparam_t xpp;
 	int marker_size;
+	int level;
+	int favor;
+	int style;
+	const char *ancestor;	/* label for orig */
+	const char *file1;	/* label for mf1 */
+	const char *file2;	/* label for mf2 */
 } xmparam_t;
 
 #define DEFAULT_CONFLICT_MARKER_SIZE 7
 
-int xdl_merge(mmfile_t *orig, mmfile_t *mf1, const char *name1,
-		mmfile_t *mf2, const char *name2,
-		xmparam_t const *xmp, int flags, mmbuffer_t *result);
+int xdl_merge(mmfile_t *orig, mmfile_t *mf1, mmfile_t *mf2,
+		xmparam_t const *xmp, mmbuffer_t *result);
 
 #ifdef __cplusplus
 }
diff --git a/xdiff/xmerge.c b/xdiff/xmerge.c
index 8cbe45e675..6d6fc1bc5e 100644
--- a/xdiff/xmerge.c
+++ b/xdiff/xmerge.c
@@ -28,6 +28,7 @@ typedef struct s_xdmerge {
 	 * 0 = conflict,
 	 * 1 = no conflict, take first,
 	 * 2 = no conflict, take second.
+	 * 3 = no conflict, take both.
 	 */
 	int mode;
 	/*
@@ -144,12 +145,13 @@ static int xdl_orig_copy(xdfenv_t *xe, int i, int count, int add_nl, char *dest)
 
 static int fill_conflict_hunk(xdfenv_t *xe1, const char *name1,
 			      xdfenv_t *xe2, const char *name2,
+			      const char *name3,
 			      int size, int i, int style,
 			      xdmerge_t *m, char *dest, int marker_size)
 {
 	int marker1_size = (name1 ? strlen(name1) + 1 : 0);
 	int marker2_size = (name2 ? strlen(name2) + 1 : 0);
-	int j;
+	int marker3_size = (name3 ? strlen(name3) + 1 : 0);
 
 	if (marker_size <= 0)
 		marker_size = DEFAULT_CONFLICT_MARKER_SIZE;
@@ -161,8 +163,8 @@ static int fill_conflict_hunk(xdfenv_t *xe1, const char *name1,
 	if (!dest) {
 		size += marker_size + 1 + marker1_size;
 	} else {
-		for (j = 0; j < marker_size; j++)
-			dest[size++] = '<';
+		memset(dest + size, '<', marker_size);
+		size += marker_size;
 		if (marker1_size) {
 			dest[size] = ' ';
 			memcpy(dest + size + 1, name1, marker1_size - 1);
@@ -178,10 +180,15 @@ static int fill_conflict_hunk(xdfenv_t *xe1, const char *name1,
 	if (style == XDL_MERGE_DIFF3) {
 		/* Shared preimage */
 		if (!dest) {
-			size += marker_size + 1;
+			size += marker_size + 1 + marker3_size;
 		} else {
-			for (j = 0; j < marker_size; j++)
-				dest[size++] = '|';
+			memset(dest + size, '|', marker_size);
+			size += marker_size;
+			if (marker3_size) {
+				dest[size] = ' ';
+				memcpy(dest + size + 1, name3, marker3_size - 1);
+				size += marker3_size;
+			}
 			dest[size++] = '\n';
 		}
 		size += xdl_orig_copy(xe1, m->i0, m->chg0, 1,
@@ -191,8 +198,8 @@ static int fill_conflict_hunk(xdfenv_t *xe1, const char *name1,
 	if (!dest) {
 		size += marker_size + 1;
 	} else {
-		for (j = 0; j < marker_size; j++)
-			dest[size++] = '=';
+		memset(dest + size, '=', marker_size);
+		size += marker_size;
 		dest[size++] = '\n';
 	}
 
@@ -202,8 +209,8 @@ static int fill_conflict_hunk(xdfenv_t *xe1, const char *name1,
 	if (!dest) {
 		size += marker_size + 1 + marker2_size;
 	} else {
-		for (j = 0; j < marker_size; j++)
-			dest[size++] = '>';
+		memset(dest + size, '>', marker_size);
+		size += marker_size;
 		if (marker2_size) {
 			dest[size] = ' ';
 			memcpy(dest + size + 1, name2, marker2_size - 1);
@@ -216,6 +223,7 @@ static int fill_conflict_hunk(xdfenv_t *xe1, const char *name1,
 
 static int xdl_fill_merge_buffer(xdfenv_t *xe1, const char *name1,
 				 xdfenv_t *xe2, const char *name2,
+				 const char *ancestor_name,
 				 int favor,
 				 xdmerge_t *m, char *dest, int style,
 				 int marker_size)
@@ -228,16 +236,22 @@ static int xdl_fill_merge_buffer(xdfenv_t *xe1, const char *name1,
 
 		if (m->mode == 0)
 			size = fill_conflict_hunk(xe1, name1, xe2, name2,
+						  ancestor_name,
 						  size, i, style, m, dest,
 						  marker_size);
-		else if (m->mode == 1)
-			size += xdl_recs_copy(xe1, i, m->i1 + m->chg1 - i, 0,
-					      dest ? dest + size : NULL);
-		else if (m->mode == 2)
-			size += xdl_recs_copy(xe2, m->i2 - m->i1 + i,
-					      m->i1 + m->chg2 - i, 0,
+		else if (m->mode & 3) {
+			/* Before conflicting part */
+			size += xdl_recs_copy(xe1, i, m->i1 - i, 0,
 					      dest ? dest + size : NULL);
-		else
+			/* Postimage from side #1 */
+			if (m->mode & 1)
+				size += xdl_recs_copy(xe1, m->i1, m->chg1, 1,
+						      dest ? dest + size : NULL);
+			/* Postimage from side #2 */
+			if (m->mode & 2)
+				size += xdl_recs_copy(xe2, m->i2, m->chg2, 1,
+						      dest ? dest + size : NULL);
+		} else
 			continue;
 		i = m->i1 + m->chg1;
 	}
@@ -392,15 +406,19 @@ static int xdl_simplify_non_conflicts(xdfenv_t *xe1, xdmerge_t *m,
  *
  * returns < 0 on error, == 0 for no conflicts, else number of conflicts
  */
-static int xdl_do_merge(xdfenv_t *xe1, xdchange_t *xscr1, const char *name1,
-		xdfenv_t *xe2, xdchange_t *xscr2, const char *name2,
-		int flags, xmparam_t const *xmp, mmbuffer_t *result) {
+static int xdl_do_merge(xdfenv_t *xe1, xdchange_t *xscr1,
+		xdfenv_t *xe2, xdchange_t *xscr2,
+		xmparam_t const *xmp, mmbuffer_t *result)
+{
 	xdmerge_t *changes, *c;
 	xpparam_t const *xpp = &xmp->xpp;
+	const char *const ancestor_name = xmp->ancestor;
+	const char *const name1 = xmp->file1;
+	const char *const name2 = xmp->file2;
 	int i0, i1, i2, chg0, chg1, chg2;
-	int level = flags & XDL_MERGE_LEVEL_MASK;
-	int style = flags & XDL_MERGE_STYLE_MASK;
-	int favor = XDL_MERGE_FAVOR(flags);
+	int level = xmp->level;
+	int style = xmp->style;
+	int favor = xmp->favor;
 
 	if (style == XDL_MERGE_DIFF3) {
 		/*
@@ -534,6 +552,7 @@ static int xdl_do_merge(xdfenv_t *xe1, xdchange_t *xscr1, const char *name1,
 	if (result) {
 		int marker_size = xmp->marker_size;
 		int size = xdl_fill_merge_buffer(xe1, name1, xe2, name2,
+						 ancestor_name,
 						 favor, changes, NULL, style,
 						 marker_size);
 		result->ptr = xdl_malloc(size);
@@ -542,15 +561,16 @@ static int xdl_do_merge(xdfenv_t *xe1, xdchange_t *xscr1, const char *name1,
 			return -1;
 		}
 		result->size = size;
-		xdl_fill_merge_buffer(xe1, name1, xe2, name2, favor, changes,
+		xdl_fill_merge_buffer(xe1, name1, xe2, name2,
+				      ancestor_name, favor, changes,
 				      result->ptr, style, marker_size);
 	}
 	return xdl_cleanup_merge(changes);
 }
 
-int xdl_merge(mmfile_t *orig, mmfile_t *mf1, const char *name1,
-		mmfile_t *mf2, const char *name2,
-		xmparam_t const *xmp, int flags, mmbuffer_t *result) {
+int xdl_merge(mmfile_t *orig, mmfile_t *mf1, mmfile_t *mf2,
+		xmparam_t const *xmp, mmbuffer_t *result)
+{
 	xdchange_t *xscr1, *xscr2;
 	xdfenv_t xe1, xe2;
 	int status;
@@ -585,9 +605,9 @@ int xdl_merge(mmfile_t *orig, mmfile_t *mf1, const char *name1,
 		memcpy(result->ptr, mf1->ptr, mf1->size);
 		result->size = mf1->size;
 	} else {
-		status = xdl_do_merge(&xe1, xscr1, name1,
-				      &xe2, xscr2, name2,
-				      flags, xmp, result);
+		status = xdl_do_merge(&xe1, xscr1,
+				      &xe2, xscr2,
+				      xmp, result);
 	}
 	xdl_free_script(xscr1);
 	xdl_free_script(xscr2);