diff options
| -rwxr-xr-x | contrib/subtree/git-subtree.sh | 4 | ||||
| -rwxr-xr-x | contrib/subtree/t/t7900-subtree.sh | 194 |
2 files changed, 124 insertions, 74 deletions
diff --git a/contrib/subtree/git-subtree.sh b/contrib/subtree/git-subtree.sh index 9f06571851..308b777b0a 100755 --- a/contrib/subtree/git-subtree.sh +++ b/contrib/subtree/git-subtree.sh @@ -648,7 +648,7 @@ cmd_split() debug "Merging split branch into HEAD..." latest_old=$(cache_get latest_old) git merge -s ours \ - -m "$(rejoin_msg $dir $latest_old $latest_new)" \ + -m "$(rejoin_msg "$dir" $latest_old $latest_new)" \ $latest_new >&2 || exit $? fi if [ -n "$branch" ]; then @@ -735,7 +735,7 @@ cmd_push() refspec=$2 echo "git push using: " $repository $refspec localrev=$(git subtree split --prefix="$prefix") || die - git push $repository $localrev:refs/heads/$refspec + git push "$repository" $localrev:refs/heads/$refspec else die "'$dir' must already exist. Try 'git subtree add'." fi diff --git a/contrib/subtree/t/t7900-subtree.sh b/contrib/subtree/t/t7900-subtree.sh index 90519823be..dfbe443dea 100755 --- a/contrib/subtree/t/t7900-subtree.sh +++ b/contrib/subtree/t/t7900-subtree.sh @@ -1,6 +1,7 @@ #!/bin/sh # # Copyright (c) 2012 Avery Pennaraum +# Copyright (c) 2015 Alexey Shumkin # test_description='Basic porcelain support for subtrees @@ -32,25 +33,6 @@ check_equal() fi } -fixnl() -{ - t="" - while read x; do - t="$t$x " - done - echo $t -} - -multiline() -{ - while read x; do - set -- $x - for d in "$@"; do - echo "$d" - done - done -} - undo() { git reset --hard HEAD~ @@ -62,11 +44,11 @@ last_commit_message() } test_expect_success 'init subproj' ' - test_create_repo subproj + test_create_repo "sub proj" ' # To the subproject! -cd subproj +cd ./"sub proj" test_expect_success 'add sub1' ' create sub1 && @@ -106,39 +88,39 @@ test_expect_success 'add main4' ' ' test_expect_success 'fetch subproj history' ' - git fetch ./subproj sub1 && + git fetch ./"sub proj" sub1 && git branch sub1 FETCH_HEAD ' test_expect_success 'no subtree exists in main tree' ' - test_must_fail git subtree merge --prefix=subdir sub1 + test_must_fail git subtree merge --prefix="sub dir" sub1 ' test_expect_success 'no pull from non-existant subtree' ' - test_must_fail git subtree pull --prefix=subdir ./subproj sub1 + test_must_fail git subtree pull --prefix="sub dir" ./"sub proj" sub1 ' test_expect_success 'check if --message works for add' ' - git subtree add --prefix=subdir --message="Added subproject" sub1 && + git subtree add --prefix="sub dir" --message="Added subproject" sub1 && check_equal ''"$(last_commit_message)"'' "Added subproject" && undo ' test_expect_success 'check if --message works as -m and --prefix as -P' ' - git subtree add -P subdir -m "Added subproject using git subtree" sub1 && + git subtree add -P "sub dir" -m "Added subproject using git subtree" sub1 && check_equal ''"$(last_commit_message)"'' "Added subproject using git subtree" && undo ' test_expect_success 'check if --message works with squash too' ' - git subtree add -P subdir -m "Added subproject with squash" --squash sub1 && + git subtree add -P "sub dir" -m "Added subproject with squash" --squash sub1 && check_equal ''"$(last_commit_message)"'' "Added subproject with squash" && undo ' test_expect_success 'add subproj to mainline' ' - git subtree add --prefix=subdir/ FETCH_HEAD && - check_equal ''"$(last_commit_message)"'' "Add '"'subdir/'"' from commit '"'"'''"$(git rev-parse sub1)"'''"'"'" + git subtree add --prefix="sub dir"/ FETCH_HEAD && + check_equal ''"$(last_commit_message)"'' "Add '"'sub dir/'"' from commit '"'"'''"$(git rev-parse sub1)"'''"'"'" ' # this shouldn't actually do anything, since FETCH_HEAD is already a parent @@ -147,7 +129,7 @@ test_expect_success 'merge fetched subproj' ' ' test_expect_success 'add main-sub5' ' - create subdir/main-sub5 && + create "sub dir/main-sub5" && git commit -m "main-sub5" ' @@ -157,29 +139,29 @@ test_expect_success 'add main6' ' ' test_expect_success 'add main-sub7' ' - create subdir/main-sub7 && + create "sub dir/main-sub7" && git commit -m "main-sub7" ' test_expect_success 'fetch new subproj history' ' - git fetch ./subproj sub2 && + git fetch ./"sub proj" sub2 && git branch sub2 FETCH_HEAD ' test_expect_success 'check if --message works for merge' ' - git subtree merge --prefix=subdir -m "Merged changes from subproject" sub2 && + git subtree merge --prefix="sub dir" -m "Merged changes from subproject" sub2 && check_equal ''"$(last_commit_message)"'' "Merged changes from subproject" && undo ' test_expect_success 'check if --message for merge works with squash too' ' - git subtree merge --prefix subdir -m "Merged changes from subproject using squash" --squash sub2 && + git subtree merge --prefix "sub dir" -m "Merged changes from subproject using squash" --squash sub2 && check_equal ''"$(last_commit_message)"'' "Merged changes from subproject using squash" && undo ' test_expect_success 'merge new subproj history into subdir' ' - git subtree merge --prefix=subdir FETCH_HEAD && + git subtree merge --prefix="sub dir" FETCH_HEAD && git branch pre-split && check_equal ''"$(last_commit_message)"'' "Merge commit '"'"'"$(git rev-parse sub2)"'"'"' into mainline" && undo @@ -208,53 +190,53 @@ test_expect_success 'Check that the <prefix> exists for a split' ' ' test_expect_success 'check if --message works for split+rejoin' ' - spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' && + spl1=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' && git branch spl1 "$spl1" && check_equal ''"$(last_commit_message)"'' "Split & rejoin" && undo ' test_expect_success 'check split with --branch' ' - spl1=$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin) && + spl1=$(git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --message "Split & rejoin" --rejoin) && undo && - git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --branch splitbr1 && + git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --branch splitbr1 && check_equal ''"$(git rev-parse splitbr1)"'' "$spl1" ' test_expect_success 'check hash of split' ' - spl1=$(git subtree split --prefix subdir) && - git subtree split --prefix subdir --branch splitbr1test && + spl1=$(git subtree split --prefix "sub dir") && + git subtree split --prefix "sub dir" --branch splitbr1test && check_equal ''"$(git rev-parse splitbr1test)"'' "$spl1" && new_hash=$(git rev-parse splitbr1test~2) && check_equal ''"$new_hash"'' "$subdir_hash" ' test_expect_success 'check split with --branch for an existing branch' ' - spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' && + spl1=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' && undo && git branch splitbr2 sub1 && - git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --branch splitbr2 && + git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --branch splitbr2 && check_equal ''"$(git rev-parse splitbr2)"'' "$spl1" ' test_expect_success 'check split with --branch for an incompatible branch' ' - test_must_fail git subtree split --prefix subdir --onto FETCH_HEAD --branch subdir + test_must_fail git subtree split --prefix "sub dir" --onto FETCH_HEAD --branch subdir ' test_expect_success 'check split+rejoin' ' - spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' && + spl1=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' && undo && - git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --rejoin && - check_equal ''"$(last_commit_message)"'' "Split '"'"'subdir/'"'"' into commit '"'"'"$spl1"'"'"'" + git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --rejoin && + check_equal ''"$(last_commit_message)"'' "Split '"'"'sub dir/'"'"' into commit '"'"'"$spl1"'"'"'" ' test_expect_success 'add main-sub8' ' - create subdir/main-sub8 && + create "sub dir/main-sub8" && git commit -m "main-sub8" ' # To the subproject! -cd ./subproj +cd ./"sub proj" test_expect_success 'merge split into subproj' ' git fetch .. spl1 && @@ -271,22 +253,22 @@ test_expect_success 'add sub9' ' cd .. test_expect_success 'split for sub8' ' - split2=''"$(git subtree split --annotate='"'*'"' --prefix subdir/ --rejoin)"'' && + split2=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir/" --rejoin)"'' && git branch split2 "$split2" ' test_expect_success 'add main-sub10' ' - create subdir/main-sub10 && + create "sub dir/main-sub10" && git commit -m "main-sub10" ' test_expect_success 'split for sub10' ' - spl3=''"$(git subtree split --annotate='"'*'"' --prefix subdir --rejoin)"'' && + spl3=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir" --rejoin)"'' && git branch spl3 "$spl3" ' # To the subproject! -cd ./subproj +cd ./"sub proj" test_expect_success 'merge split into subproj' ' git fetch .. spl3 && @@ -295,42 +277,64 @@ test_expect_success 'merge split into subproj' ' git branch subproj-merge-spl3 ' -chkm="main4 main6" -chkms="main-sub10 main-sub5 main-sub7 main-sub8" -chkms_sub=$(echo $chkms | multiline | sed 's,^,subdir/,' | fixnl) -chks="sub1 sub2 sub3 sub9" -chks_sub=$(echo $chks | multiline | sed 's,^,subdir/,' | fixnl) +chkm="main4 +main6" +chkms="main-sub10 +main-sub5 +main-sub7 +main-sub8" +chkms_sub=$(cat <<TXT | sed 's,^,sub dir/,' +$chkms +TXT +) +chks="sub1 +sub2 +sub3 +sub9" +chks_sub=$(cat <<TXT | sed 's,^,sub dir/,' +$chks +TXT +) test_expect_success 'make sure exactly the right set of files ends up in the subproj' ' - subfiles=''"$(git ls-files | fixnl)"'' && - check_equal "$subfiles" "$chkms $chks" + subfiles="$(git ls-files)" && + check_equal "$subfiles" "$chkms +$chks" ' - test_expect_success 'make sure the subproj history *only* contains commits that affect the subdir' ' - allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | fixnl)"'' && - check_equal "$allchanges" "$chkms $chks" + allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | sed "/^$/d")"'' && + check_equal "$allchanges" "$chkms +$chks" ' # Back to mainline cd .. test_expect_success 'pull from subproj' ' - git fetch ./subproj subproj-merge-spl3 && + git fetch ./"sub proj" subproj-merge-spl3 && git branch subproj-merge-spl3 FETCH_HEAD && - git subtree pull --prefix=subdir ./subproj subproj-merge-spl3 + git subtree pull --prefix="sub dir" ./"sub proj" subproj-merge-spl3 ' test_expect_success 'make sure exactly the right set of files ends up in the mainline' ' - mainfiles=''"$(git ls-files | fixnl)"'' && - check_equal "$mainfiles" "$chkm $chkms_sub $chks_sub" + mainfiles=$(git ls-files) && + check_equal "$mainfiles" "$chkm +$chkms_sub +$chks_sub" ' test_expect_success 'make sure each filename changed exactly once in the entire history' ' # main-sub?? and /subdir/main-sub?? both change, because those are the # changes that were split into their own history. And subdir/sub?? never # change, since they were *only* changed in the subtree branch. - allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | fixnl)"'' && - check_equal "$allchanges" ''"$(echo $chkms $chkm $chks $chkms_sub | multiline | sort | fixnl)"'' + allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | sed "/^$/d")"'' && + check_equal "$allchanges" ''"$(cat <<TXT | sort +$chkms +$chkm +$chks +$chkms_sub +TXT +)"'' ' test_expect_success 'make sure the --rejoin commits never make it into subproj' ' @@ -377,7 +381,7 @@ cd ../main test_expect_success 'add sub as subdir in main' ' git fetch ../sub master && git branch sub2 FETCH_HEAD && - git subtree add --prefix subdir sub2 + git subtree add --prefix "sub dir" sub2 ' cd ../sub @@ -392,16 +396,16 @@ cd ../main test_expect_success 'merge from sub' ' git fetch ../sub master && git branch sub3 FETCH_HEAD && - git subtree merge --prefix subdir sub3 + git subtree merge --prefix "sub dir" sub3 ' test_expect_success 'add main-sub4' ' - create subdir/main-sub4 && + create "sub dir/main-sub4" && git commit -m "main-sub4" ' test_expect_success 'split for main-sub4 without --onto' ' - git subtree split --prefix subdir --branch mainsub4 + git subtree split --prefix "sub dir" --branch mainsub4 ' # at this point, the new commit parent should be sub3 if it is not, @@ -468,4 +472,50 @@ test_expect_success 'verify one file change per commit' ' )) ' +# test push + +cd ../.. + +mkdir test-push + +cd test-push + +test_expect_success 'init main' ' + test_create_repo main +' + +test_expect_success 'init sub' ' + test_create_repo "sub project" +' + +cd ./"sub project" + +test_expect_success 'add subproject' ' + create "sub project" && + git commit -m "Sub project: 1" && + git branch sub-branch-1 +' + +cd ../main + +test_expect_success 'make first commit and add subproject' ' + create "main-1" && + git commit -m "main: 1" && + git subtree add "../sub project" --prefix "sub dir" --message "Added subproject" sub-branch-1 && + check_equal "$(last_commit_message)" "Added subproject" +' + +test_expect_success 'make second commit to a subproject file and push it into a sub project' ' + create "sub dir/sub1" && + git commit -m "Sub project: 2" && + git subtree push "../sub project" --prefix "sub dir" sub-branch-1 +' + +cd ../"sub project" + +test_expect_success 'Test second commit is pushed' ' + git checkout sub-branch-1 && + check_equal "$(last_commit_message)" "Sub project: 2" +' + test_done |