diff options
| -rw-r--r-- | Documentation/config/merge.txt | 10 | ||||
| -rw-r--r-- | Documentation/git-merge.txt | 11 | ||||
| -rw-r--r-- | Documentation/merge-options.txt | 8 | ||||
| -rw-r--r-- | branch.c | 1 | ||||
| -rw-r--r-- | builtin/commit.c | 2 | ||||
| -rw-r--r-- | builtin/merge.c | 25 | ||||
| -rw-r--r-- | builtin/rebase.c | 3 | ||||
| -rw-r--r-- | parse-options.h | 1 | ||||
| -rw-r--r-- | path.c | 1 | ||||
| -rw-r--r-- | path.h | 4 | ||||
| -rwxr-xr-x | t/t3033-merge-toplevel.sh | 22 | ||||
| -rwxr-xr-x | t/t7600-merge.sh | 132 |
12 files changed, 214 insertions, 6 deletions
diff --git a/Documentation/config/merge.txt b/Documentation/config/merge.txt index 6a313937f8..cb2ed58907 100644 --- a/Documentation/config/merge.txt +++ b/Documentation/config/merge.txt @@ -70,6 +70,16 @@ merge.stat:: Whether to print the diffstat between ORIG_HEAD and the merge result at the end of the merge. True by default. +merge.autoStash:: + When set to true, automatically create a temporary stash entry + before the operation begins, and apply it after the operation + ends. This means that you can run merge on a dirty worktree. + However, use with care: the final stash application after a + successful merge might result in non-trivial conflicts. + This option can be overridden by the `--no-autostash` and + `--autostash` options of linkgit:git-merge[1]. + Defaults to false. + merge.tool:: Controls which merge tool is used by linkgit:git-mergetool[1]. The list below shows the valid built-in values. diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 092529c619..ec06b2f8c2 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -94,7 +94,8 @@ will be appended to the specified message. --abort:: Abort the current conflict resolution process, and - try to reconstruct the pre-merge state. + try to reconstruct the pre-merge state. If an autostash entry is + present, apply it to the worktree. + If there were uncommitted worktree changes present when the merge started, 'git merge --abort' will in some cases be unable to @@ -102,11 +103,15 @@ reconstruct these changes. It is therefore recommended to always commit or stash your changes before running 'git merge'. + 'git merge --abort' is equivalent to 'git reset --merge' when -`MERGE_HEAD` is present. +`MERGE_HEAD` is present unless `MERGE_AUTOSTASH` is also present in +which case 'git merge --abort' applies the stash entry to the worktree +whereas 'git reset --merge' will save the stashed changes in the stash +reflog. --quit:: Forget about the current merge in progress. Leave the index - and the working tree as-is. + and the working tree as-is. If `MERGE_AUTOSTASH` is present, the + stash entry will be saved to the stash reflog. --continue:: After a 'git merge' stops due to conflicts you can conclude the diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 40dc4f5e8c..3985e6d4a9 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -155,6 +155,14 @@ ifndef::git-pull[] Note that not all merge strategies may support progress reporting. +--autostash:: +--no-autostash:: + Automatically create a temporary stash entry before the operation + begins, and apply it after the operation ends. This means + that you can run the operation on a dirty worktree. However, use + with care: the final stash application after a successful + merge might result in non-trivial conflicts. + endif::git-pull[] --allow-unrelated-histories:: @@ -344,6 +344,7 @@ void remove_merge_branch_state(struct repository *r) unlink(git_path_merge_rr(r)); unlink(git_path_merge_msg(r)); unlink(git_path_merge_mode(r)); + save_autostash(git_path_merge_autostash(r)); } void remove_branch_state(struct repository *r, int verbose) diff --git a/builtin/commit.c b/builtin/commit.c index 7ba33a3bec..c1b25d2954 100644 --- a/builtin/commit.c +++ b/builtin/commit.c @@ -1713,6 +1713,8 @@ int cmd_commit(int argc, const char **argv, const char *prefix) &oid, flags); } + apply_autostash(git_path_merge_autostash(the_repository)); + UNLEAK(err); UNLEAK(sb); return 0; diff --git a/builtin/merge.c b/builtin/merge.c index d127d2225f..f86ae90bfc 100644 --- a/builtin/merge.c +++ b/builtin/merge.c @@ -82,6 +82,7 @@ static int show_progress = -1; static int default_to_upstream = 1; static int signoff; static const char *sign_commit; +static int autostash; static int no_verify; static struct strategy all_strategy[] = { @@ -286,6 +287,7 @@ static struct option builtin_merge_options[] = { OPT_SET_INT(0, "progress", &show_progress, N_("force progress reporting"), 1), { OPTION_STRING, 'S', "gpg-sign", &sign_commit, N_("key-id"), N_("GPG sign commit"), PARSE_OPT_OPTARG, NULL, (intptr_t) "" }, + OPT_AUTOSTASH(&autostash), OPT_BOOL(0, "overwrite-ignore", &overwrite_ignore, N_("update ignored files (default)")), OPT_BOOL(0, "signoff", &signoff, N_("add Signed-off-by:")), OPT_BOOL(0, "no-verify", &no_verify, N_("bypass pre-merge-commit and commit-msg hooks")), @@ -475,6 +477,7 @@ static void finish(struct commit *head_commit, /* Run a post-merge hook */ run_hook_le(NULL, "post-merge", squash ? "1" : "0", NULL); + apply_autostash(git_path_merge_autostash(the_repository)); strbuf_release(&reflog_message); } @@ -634,6 +637,9 @@ static int git_merge_config(const char *k, const char *v, void *cb) return 0; } else if (!strcmp(k, "gpg.mintrustlevel")) { check_trust_level = 0; + } else if (!strcmp(k, "merge.autostash")) { + autostash = git_config_bool(k, v); + return 0; } status = fmt_merge_msg_config(k, v, cb); @@ -1281,6 +1287,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix) if (abort_current_merge) { int nargc = 2; const char *nargv[] = {"reset", "--merge", NULL}; + struct strbuf stash_oid = STRBUF_INIT; if (orig_argc != 2) usage_msg_opt(_("--abort expects no arguments"), @@ -1289,8 +1296,17 @@ int cmd_merge(int argc, const char **argv, const char *prefix) if (!file_exists(git_path_merge_head(the_repository))) die(_("There is no merge to abort (MERGE_HEAD missing).")); + if (read_oneliner(&stash_oid, git_path_merge_autostash(the_repository), + READ_ONELINER_SKIP_IF_EMPTY)) + unlink(git_path_merge_autostash(the_repository)); + /* Invoke 'git reset --merge' */ ret = cmd_reset(nargc, nargv, prefix); + + if (stash_oid.len) + apply_autostash_oid(stash_oid.buf); + + strbuf_release(&stash_oid); goto done; } @@ -1513,6 +1529,10 @@ int cmd_merge(int argc, const char **argv, const char *prefix) goto done; } + if (autostash) + create_autostash(the_repository, + git_path_merge_autostash(the_repository), + "merge"); if (checkout_fast_forward(the_repository, &head_commit->object.oid, &commit->object.oid, @@ -1579,6 +1599,11 @@ int cmd_merge(int argc, const char **argv, const char *prefix) if (fast_forward == FF_ONLY) die(_("Not possible to fast-forward, aborting.")); + if (autostash) + create_autostash(the_repository, + git_path_merge_autostash(the_repository), + "merge"); + /* We are going to make a new commit. */ git_committer_info(IDENT_STRICT); diff --git a/builtin/rebase.c b/builtin/rebase.c index 08b89869b3..bc4fc69906 100644 --- a/builtin/rebase.c +++ b/builtin/rebase.c @@ -1376,8 +1376,7 @@ int cmd_rebase(int argc, const char **argv, const char *prefix) { OPTION_STRING, 'S', "gpg-sign", &gpg_sign, N_("key-id"), N_("GPG-sign commits"), PARSE_OPT_OPTARG, NULL, (intptr_t) "" }, - OPT_BOOL(0, "autostash", &options.autostash, - N_("automatically stash/stash pop before and after")), + OPT_AUTOSTASH(&options.autostash), OPT_STRING_LIST('x', "exec", &exec, N_("exec"), N_("add exec lines after each commit of the " "editable list")), diff --git a/parse-options.h b/parse-options.h index fece5ba628..46af942093 100644 --- a/parse-options.h +++ b/parse-options.h @@ -336,5 +336,6 @@ int parse_opt_passthru_argv(const struct option *, const char *, int); #define OPT_CLEANUP(v) OPT_STRING(0, "cleanup", v, N_("mode"), N_("how to strip spaces and #comments from message")) #define OPT_PATHSPEC_FROM_FILE(v) OPT_FILENAME(0, "pathspec-from-file", v, N_("read pathspec from file")) #define OPT_PATHSPEC_FILE_NUL(v) OPT_BOOL(0, "pathspec-file-nul", v, N_("with --pathspec-from-file, pathspec elements are separated with NUL character")) +#define OPT_AUTOSTASH(v) OPT_BOOL(0, "autostash", v, N_("automatically stash/stash pop before and after")) #endif @@ -1535,5 +1535,6 @@ REPO_GIT_PATH_FUNC(merge_msg, "MERGE_MSG") REPO_GIT_PATH_FUNC(merge_rr, "MERGE_RR") REPO_GIT_PATH_FUNC(merge_mode, "MERGE_MODE") REPO_GIT_PATH_FUNC(merge_head, "MERGE_HEAD") +REPO_GIT_PATH_FUNC(merge_autostash, "MERGE_AUTOSTASH") REPO_GIT_PATH_FUNC(fetch_head, "FETCH_HEAD") REPO_GIT_PATH_FUNC(shallow, "shallow") @@ -177,11 +177,12 @@ struct path_cache { const char *merge_rr; const char *merge_mode; const char *merge_head; + const char *merge_autostash; const char *fetch_head; const char *shallow; }; -#define PATH_CACHE_INIT { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL } +#define PATH_CACHE_INIT { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL } const char *git_path_cherry_pick_head(struct repository *r); const char *git_path_revert_head(struct repository *r); @@ -190,6 +191,7 @@ const char *git_path_merge_msg(struct repository *r); const char *git_path_merge_rr(struct repository *r); const char *git_path_merge_mode(struct repository *r); const char *git_path_merge_head(struct repository *r); +const char *git_path_merge_autostash(struct repository *r); const char *git_path_fetch_head(struct repository *r); const char *git_path_shallow(struct repository *r); diff --git a/t/t3033-merge-toplevel.sh b/t/t3033-merge-toplevel.sh index d314599428..e29c284b9b 100755 --- a/t/t3033-merge-toplevel.sh +++ b/t/t3033-merge-toplevel.sh @@ -142,6 +142,17 @@ test_expect_success 'refuse two-project merge by default' ' test_must_fail git merge five ' +test_expect_success 'refuse two-project merge by default, quit before --autostash happens' ' + t3033_reset && + git reset --hard four && + echo change >>one.t && + git diff >expect && + test_must_fail git merge --autostash five 2>err && + test_i18ngrep ! "stash" err && + git diff >actual && + test_cmp expect actual +' + test_expect_success 'two-project merge with --allow-unrelated-histories' ' t3033_reset && git reset --hard four && @@ -149,4 +160,15 @@ test_expect_success 'two-project merge with --allow-unrelated-histories' ' git diff --exit-code five ' +test_expect_success 'two-project merge with --allow-unrelated-histories with --autostash' ' + t3033_reset && + git reset --hard four && + echo change >>one.t && + git diff one.t >expect && + git merge --allow-unrelated-histories --autostash five 2>err && + test_i18ngrep "Applied autostash." err && + git diff one.t >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index 4fa0ef8e3b..5883a6adc3 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -30,13 +30,17 @@ Testing basic merge operations/option parsing. . "$TEST_DIRECTORY"/lib-gpg.sh test_write_lines 1 2 3 4 5 6 7 8 9 >file +cp file file.orig test_write_lines '1 X' 2 3 4 5 6 7 8 9 >file.1 +test_write_lines 1 2 '3 X' 4 5 6 7 8 9 >file.3 test_write_lines 1 2 3 4 '5 X' 6 7 8 9 >file.5 test_write_lines 1 2 3 4 5 6 7 8 '9 X' >file.9 test_write_lines 1 2 3 4 5 6 7 8 '9 Y' >file.9y test_write_lines '1 X' 2 3 4 5 6 7 8 9 >result.1 test_write_lines '1 X' 2 3 4 '5 X' 6 7 8 9 >result.1-5 +test_write_lines '1 X' 2 3 4 5 6 7 8 '9 X' >result.1-9 test_write_lines '1 X' 2 3 4 '5 X' 6 7 8 '9 X' >result.1-5-9 +test_write_lines '1 X' 2 '3 X' 4 '5 X' 6 7 8 '9 X' >result.1-3-5-9 test_write_lines 1 2 3 4 5 6 7 8 '9 Z' >result.9z create_merge_msgs () { @@ -675,6 +679,134 @@ test_expect_success 'refresh the index before merging' ' git merge c3 ' +test_expect_success 'merge with --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git merge --autostash c2 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5 merge-result && + test_cmp result.1-5-9 file +' + +test_expect_success 'merge with merge.autoStash' ' + test_config merge.autoStash true && + git reset --hard c1 && + git merge-file file file.orig file.9 && + git merge c2 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5 merge-result && + test_cmp result.1-5-9 file +' + +test_expect_success 'fast-forward merge with --autostash' ' + git reset --hard c0 && + git merge-file file file.orig file.5 && + git merge --autostash c1 2>err && + test_i18ngrep "Applied autostash." err && + test_cmp result.1-5 file +' + +test_expect_success 'octopus merge with --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.3 && + git merge --autostash c2 c3 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5-9 merge-result && + test_cmp result.1-3-5-9 file +' + +test_expect_success 'conflicted merge with --autostash, --abort restores stash' ' + git reset --hard c3 && + cp file.1 file && + test_must_fail git merge --autostash c7 && + git merge --abort 2>err && + test_i18ngrep "Applied autostash." err && + test_cmp file.1 file +' + +test_expect_success 'completed merge (git commit) with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git commit 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5 merge-result && + test_cmp result.1-5-9 file +' + +test_expect_success 'completed merge (git merge --continue) with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git merge --continue 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5 merge-result && + test_cmp result.1-5-9 file +' + +test_expect_success 'aborted merge (merge --abort) with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git merge --abort 2>err && + test_i18ngrep "Applied autostash." err && + git diff >actual && + test_cmp expect actual +' + +test_expect_success 'aborted merge (reset --hard) with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git reset --hard 2>err && + test_i18ngrep "Autostash exists; creating a new stash entry." err && + git diff --exit-code +' + +test_expect_success 'quit merge with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git diff HEAD >expect && + git merge --quit 2>err && + test_i18ngrep "Autostash exists; creating a new stash entry." err && + git diff HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'merge with conflicted --autostash changes' ' + git reset --hard c1 && + git merge-file file file.orig file.9y && + git diff >expect && + test_when_finished "test_might_fail git stash drop" && + git merge --autostash c3 2>err && + test_i18ngrep "Applying autostash resulted in conflicts." err && + git show HEAD:file >merge-result && + test_cmp result.1-9 merge-result && + git stash show -p >actual && + test_cmp expect actual +' + cat >expected.branch <<\EOF Merge branch 'c5-branch' (early part) EOF |