diff options
30 files changed, 40 insertions, 40 deletions
diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 631cbd840a..4ebc3d3271 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -66,7 +66,7 @@ OPTIONS disables it is in effect), make sure the patch is applicable to what the current index file records. If the file to be patched in the working tree is not - up-to-date, it is flagged as an error. This flag also + up to date, it is flagged as an error. This flag also causes the index file to be updated. --cached:: @@ -259,7 +259,7 @@ treats these changes as follows. If `--index` is specified (explicitly or implicitly), then the submodule commits must match the index exactly for the patch to apply. If any of the submodules are checked-out, then these check-outs are completely -ignored, i.e., they are not required to be up-to-date or clean and they +ignored, i.e., they are not required to be up to date or clean and they are not updated. If `--index` is not specified, then the submodule commits in the patch diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index a336ae5f6f..ba90066f10 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -223,7 +223,7 @@ access method and requested operation. That means that even if you offer only read access (e.g. by using the pserver method), 'git-cvsserver' should have write access to the database to work reliably (otherwise you need to make sure -that the database is up-to-date any time 'git-cvsserver' is executed). +that the database is up to date any time 'git-cvsserver' is executed). By default it uses SQLite databases in the Git directory, named `gitcvs.<module_name>.sqlite`. Note that the SQLite backend creates diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt index a171506952..b380677718 100644 --- a/Documentation/git-diff-index.txt +++ b/Documentation/git-diff-index.txt @@ -85,7 +85,7 @@ a 'git write-tree' + 'git diff-tree'. Thus that's the default mode. The non-cached version asks the question: show me the differences between HEAD and the currently checked out - tree - index contents _and_ files that aren't up-to-date + tree - index contents _and_ files that aren't up to date which is obviously a very useful question too, since that tells you what you *could* commit. Again, the output matches the 'git diff-tree -r' @@ -100,8 +100,8 @@ have not actually done a 'git update-index' on it yet - there is no torvalds@ppc970:~/v2.6/linux> git diff-index --abbrev HEAD :100644 100664 7476bb... 000000... kernel/sched.c -i.e., it shows that the tree has changed, and that `kernel/sched.c` has is -not up-to-date and may contain new stuff. The all-zero sha1 means that to +i.e., it shows that the tree has changed, and that `kernel/sched.c` is +not up to date and may contain new stuff. The all-zero sha1 means that to get the real diff, you need to look at the object in the working directory directly rather than do an object-to-object diff. diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 04fdd8cf08..53366a1700 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -133,7 +133,7 @@ exception is when the changed index entries are in the state that would result from the merge already.) If all named commits are already ancestors of `HEAD`, 'git merge' -will exit early with the message "Already up-to-date." +will exit early with the message "Already up to date." FAST-FORWARD MERGE ------------------ diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 4f6bed61a9..6805a74aec 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -334,7 +334,7 @@ which makes little sense. -f:: --force-rebase:: - Force a rebase even if the current branch is up-to-date and + Force a rebase even if the current branch is up to date and the command without `--force` would return without doing anything. + You may find this (or --no-ff with an interactive rebase) helpful after diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index 9ee083c415..031f31fa47 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -205,7 +205,7 @@ development on the topic branch: ------------ you could run `git rebase master topic`, to bring yourself -up-to-date before your topic is ready to be sent upstream. +up to date before your topic is ready to be sent upstream. This would result in falling back to a three-way merge, and it would conflict the same way as the test merge you resolved earlier. 'git rerere' will be run by 'git rebase' to help you resolve this diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 683e591330..b5c46223c4 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -146,7 +146,7 @@ the submodule's history. If it exists the submodule.<name> section in the linkgit:gitmodules[5] file will also be removed and that file will be staged (unless --cached or -n are used). -A submodule is considered up-to-date when the HEAD is the same as +A submodule is considered up to date when the HEAD is the same as recorded in the index, no tracked files are modified and no untracked files that aren't ignored are present in the submodules work tree. Ignored files are deemed expendable and won't stop a submodule's work diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index aa2aeabb60..636e09048e 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -424,7 +424,7 @@ Any other arguments are passed directly to 'git log' 'set-tree':: You should consider using 'dcommit' instead of this command. Commit specified commit or tree objects to SVN. This relies on - your imported fetch data being up-to-date. This makes + your imported fetch data being up to date. This makes absolutely no attempts to do patching when committing to SVN, it simply overwrites files with those specified in the tree or commit. All merging is assumed to have taken place diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 1579abf3c3..e19eba62cd 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -214,7 +214,7 @@ will remove the intended effect of the option. Using --refresh --------------- `--refresh` does not calculate a new sha1 file or bring the index -up-to-date for mode/content changes. But what it *does* do is to +up to date for mode/content changes. But what it *does* do is to "re-match" the stat information of a file with the index, so that you can refresh the index for a file that hasn't been changed but where the stat entry is out of date. diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 7577f27ec2..e29a9effcc 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -631,7 +631,7 @@ So after you do a `cp -a` to create a new copy, you'll want to do $ git update-index --refresh ---------------- + -in the new repository to make sure that the index file is up-to-date. +in the new repository to make sure that the index file is up to date. Note that the second point is true even across machines. You can duplicate a remote Git repository with *any* regular copy mechanism, be it @@ -701,7 +701,7 @@ $ git checkout-index -u -a ---------------- where the `-u` flag means that you want the checkout to keep the index -up-to-date (so that you don't have to refresh it afterward), and the +up to date (so that you don't have to refresh it afterward), and the `-a` flag means "check out all files" (if you have a stale copy or an older version of a checked out tree you may also need to add the `-f` flag first, to tell 'git checkout-index' to *force* overwriting of any old @@ -1283,7 +1283,7 @@ run a single command, 'git-receive-pack'. First, you need to create an empty repository on the remote machine that will house your public repository. This empty -repository will be populated and be kept up-to-date by pushing +repository will be populated and be kept up to date by pushing into it later. Obviously, this repository creation needs to be done only once. @@ -1450,7 +1450,7 @@ transport protocols (HTTP), you need to keep this repository would contain a call to 'git update-server-info' but you need to manually enable the hook with `mv post-update.sample post-update`. This makes sure -'git update-server-info' keeps the necessary files up-to-date. +'git update-server-info' keeps the necessary files up to date. 3. Push into the public repository from your primary repository. diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index b2514f4d44..99abfc73a7 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -369,7 +369,7 @@ them. When enabled, the default 'post-update' hook runs 'git update-server-info' to keep the information used by dumb -transports (e.g., HTTP) up-to-date. If you are publishing +transports (e.g., HTTP) up to date. If you are publishing a Git repository that is accessible via HTTP, you should probably enable this hook. diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index f51ed4e37c..adf9554ad2 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -71,7 +71,7 @@ objects/info/packs:: This file is to help dumb transports discover what packs are available in this object store. Whenever a pack is added or removed, `git update-server-info` should be run - to keep this file up-to-date if the repository is + to keep this file up to date if the repository is published for dumb transports. 'git repack' does this by default. diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index 794b83393e..242de31cb6 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -109,7 +109,7 @@ summary of the situation with 'git status': $ git status On branch master Changes to be committed: -Your branch is up-to-date with 'origin/master'. +Your branch is up to date with 'origin/master'. (use "git reset HEAD <file>..." to unstage) modified: file1 diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 5b4a62e936..4e32304301 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -39,7 +39,7 @@ set to `no` at the beginning of them. --ff-only:: Refuse to merge and exit with a non-zero status unless the - current `HEAD` is already up-to-date or the merge can be + current `HEAD` is already up to date or the merge can be resolved as a fast-forward. --log[=<n>]:: diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index a34917153f..ed1eae8b83 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -199,7 +199,7 @@ After reference and capabilities discovery, the client can decide to terminate the connection by sending a flush-pkt, telling the server it can now gracefully terminate, and disconnect, when it does not need any pack data. This can happen with the ls-remote command, and also can happen when -the client already is up-to-date. +the client already is up to date. Otherwise, it enters the negotiation phase, where the client and server determine what the minimal packfile necessary for transport is, diff --git a/Documentation/technical/trivial-merge.txt b/Documentation/technical/trivial-merge.txt index c79d4a7c47..1f1c33d0da 100644 --- a/Documentation/technical/trivial-merge.txt +++ b/Documentation/technical/trivial-merge.txt @@ -32,7 +32,7 @@ or the result. If multiple cases apply, the one used is listed first. A result which changes the index is an error if the index is not empty -and not up-to-date. +and not up to date. Entries marked '+' have stat information. Spaces marked '*' don't affect the result. @@ -65,7 +65,7 @@ empty, no entry is left for that stage). Otherwise, the given entry is left in stage 0, and there are no other entries. A result of "no merge" is an error if the index is not empty and not -up-to-date. +up to date. *empty* means that the tree must not have a directory-file conflict with the entry. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index d3c53b5130..b4d88af133 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -2195,7 +2195,7 @@ $ cd work Linus's tree will be stored in the remote-tracking branch named origin/master, and can be updated using linkgit:git-fetch[1]; you can track other public trees using linkgit:git-remote[1] to set up a "remote" and -linkgit:git-fetch[1] to keep them up-to-date; see +linkgit:git-fetch[1] to keep them up to date; see <<repositories-and-branches>>. Now create the branches in which you are going to work; these start out diff --git a/builtin/merge.c b/builtin/merge.c index 900bafdb45..a0789c798f 100644 --- a/builtin/merge.c +++ b/builtin/merge.c @@ -1345,7 +1345,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix) * If head can reach all the merge then we are up to date. * but first the most common case of merging one remote. */ - finish_up_to_date(_("Already up-to-date.")); + finish_up_to_date(_("Already up to date.")); goto done; } else if (fast_forward != FF_NO && !remoteheads->next && !common->next && @@ -1428,7 +1428,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix) } } if (up_to_date) { - finish_up_to_date(_("Already up-to-date. Yeeah!")); + finish_up_to_date(_("Already up to date. Yeeah!")); goto done; } } diff --git a/contrib/examples/git-merge.sh b/contrib/examples/git-merge.sh index ee99f1a4ee..932e78dbfe 100755 --- a/contrib/examples/git-merge.sh +++ b/contrib/examples/git-merge.sh @@ -399,7 +399,7 @@ case "$allow_fast_forward,$#,$common,$no_commit" in ?,1,"$1",*) # If head can reach all the merge then we are up to date. # but first the most common case of merging one remote. - finish_up_to_date "Already up-to-date." + finish_up_to_date "Already up to date." exit 0 ;; t,1,"$head",*) @@ -459,7 +459,7 @@ t,1,"$head",*) done if test "$up_to_date" = t then - finish_up_to_date "Already up-to-date. Yeeah!" + finish_up_to_date "Already up to date. Yeeah!" exit 0 fi ;; diff --git a/contrib/examples/git-resolve.sh b/contrib/examples/git-resolve.sh index 70fdc27b72..3099dc851a 100755 --- a/contrib/examples/git-resolve.sh +++ b/contrib/examples/git-resolve.sh @@ -41,7 +41,7 @@ fi case "$common" in "$merge") - echo "Already up-to-date. Yeeah!" + echo "Already up to date. Yeeah!" dropheads exit 0 ;; diff --git a/contrib/subtree/t/t7900-subtree.sh b/contrib/subtree/t/t7900-subtree.sh index 3c87ebaf57..d05c613c97 100755 --- a/contrib/subtree/t/t7900-subtree.sh +++ b/contrib/subtree/t/t7900-subtree.sh @@ -253,7 +253,7 @@ test_expect_success 'merge the added subproj again, should do nothing' ' # this shouldn not actually do anything, since FETCH_HEAD # is already a parent result=$(git merge -s ours -m "merge -s -ours" FETCH_HEAD) && - check_equal "${result}" "Already up-to-date." + check_equal "${result}" "Already up to date." ) ' diff --git a/git-gui/po/README b/git-gui/po/README index 0f5837d48e..2514bc22ab 100644 --- a/git-gui/po/README +++ b/git-gui/po/README @@ -165,7 +165,7 @@ to contribute an update. This may be because you would want to improve the translation of existing messages, or because the git-gui software itself was updated and there are new messages that need translation. -In any case, make sure you are up-to-date before starting your work: +In any case, make sure you are up to date before starting your work: $ git checkout master $ git pull diff --git a/git-merge-octopus.sh b/git-merge-octopus.sh index bcf0d92ec2..5b2162c89d 100755 --- a/git-merge-octopus.sh +++ b/git-merge-octopus.sh @@ -74,7 +74,7 @@ do case "$LF$common$LF" in *"$LF$SHA1$LF"*) - eval_gettextln "Already up-to-date with \$pretty_name" + eval_gettextln "Already up to date with \$pretty_name" continue ;; esac @@ -3614,7 +3614,7 @@ class P4Rebase(Command): def rebase(self): if os.system("git update-index --refresh") != 0: - die("Some files in your working directory are modified and different than what is in your index. You can use git update-index <filename> to bring the index up-to-date or stash away all your changes with git stash."); + die("Some files in your working directory are modified and different than what is in your index. You can use git update-index <filename> to bring the index up to date or stash away all your changes with git stash."); if len(read_pipe("git diff-index HEAD --")) > 0: die("You have uncommitted changes. Please commit them before rebasing or stash them away with git stash."); diff --git a/merge-recursive.c b/merge-recursive.c index 1494ffdb82..182626c027 100644 --- a/merge-recursive.c +++ b/merge-recursive.c @@ -1927,7 +1927,7 @@ int merge_trees(struct merge_options *o, } if (oid_eq(&common->object.oid, &merge->object.oid)) { - output(o, 0, _("Already up-to-date!")); + output(o, 0, _("Already up to date!")); *result = head; return 1; } diff --git a/notes-merge.c b/notes-merge.c index 70e3fbeefb..a4cb76f0f5 100644 --- a/notes-merge.c +++ b/notes-merge.c @@ -625,7 +625,7 @@ int notes_merge(struct notes_merge_options *o, if (!oidcmp(&remote->object.oid, base_oid)) { /* Already merged; result == local commit */ if (o->verbosity >= 2) - printf("Already up-to-date!\n"); + printf("Already up to date!\n"); oidcpy(result_oid, &local->object.oid); goto found_result; } @@ -2080,7 +2080,7 @@ int format_tracking_info(struct branch *branch, struct strbuf *sb) _(" (use \"git branch --unset-upstream\" to fixup)\n")); } else if (!ours && !theirs) { strbuf_addf(sb, - _("Your branch is up-to-date with '%s'.\n"), + _("Your branch is up to date with '%s'.\n"), base); } else if (!theirs) { strbuf_addf(sb, diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 97a07655a0..16ca6081fa 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -100,7 +100,7 @@ test_expect_success 'checkout (up-to-date with upstream)' ' ( cd test && git checkout b6 ) >actual && - test_i18ngrep "Your branch is up-to-date with .origin/master" actual + test_i18ngrep "Your branch is up to date with .origin/master" actual ' test_expect_success 'status (diverged from upstream)' ' @@ -130,7 +130,7 @@ test_expect_success 'status (up-to-date with upstream)' ' # reports nothing to commit test_must_fail git commit --dry-run ) >actual && - test_i18ngrep "Your branch is up-to-date with .origin/master" actual + test_i18ngrep "Your branch is up to date with .origin/master" actual ' cat >expect <<\EOF diff --git a/templates/hooks--pre-rebase.sample b/templates/hooks--pre-rebase.sample index b7f81c198e..db5feab8a1 100755 --- a/templates/hooks--pre-rebase.sample +++ b/templates/hooks--pre-rebase.sample @@ -58,7 +58,7 @@ then not_in_topic=`git rev-list "^$topic" master` if test -z "$not_in_topic" then - echo >&2 "$topic is already up-to-date with master" + echo >&2 "$topic is already up to date with master" exit 1 ;# we could allow it, but there is no point. else exit 0 diff --git a/unpack-trees.c b/unpack-trees.c index dd535bc849..a2fe4e052d 100644 --- a/unpack-trees.c +++ b/unpack-trees.c @@ -162,7 +162,7 @@ void setup_unpack_trees_porcelain(struct unpack_trees_options *opts, msgs[ERROR_BIND_OVERLAP] = _("Entry '%s' overlaps with '%s'. Cannot bind."); msgs[ERROR_SPARSE_NOT_UPTODATE_FILE] = - _("Cannot update sparse checkout: the following entries are not up-to-date:\n%s"); + _("Cannot update sparse checkout: the following entries are not up to date:\n%s"); msgs[ERROR_WOULD_LOSE_ORPHANED_OVERWRITTEN] = _("The following working tree files would be overwritten by sparse checkout update:\n%s"); msgs[ERROR_WOULD_LOSE_ORPHANED_REMOVED] = |