diff options
147 files changed, 2029 insertions, 736 deletions
diff --git a/Documentation/RelNotes/1.7.3.2.txt b/Documentation/RelNotes/1.7.3.2.txt new file mode 100644 index 0000000000..5c93b85af4 --- /dev/null +++ b/Documentation/RelNotes/1.7.3.2.txt @@ -0,0 +1,5 @@ +Git v1.7.3.2 Release Notes +========================== + +This is primarily to push out many documentation fixes accumulated since +the 1.7.3.1 release. diff --git a/Documentation/config.txt b/Documentation/config.txt index ba9639c7bd..538ebb5e2e 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -1737,6 +1737,7 @@ sendemail.to:: sendemail.smtpdomain:: sendemail.smtpserver:: sendemail.smtpserverport:: +sendemail.smtpserveroption:: sendemail.smtpuser:: sendemail.thread:: sendemail.validate:: diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index f77a0f8749..f3e95389aa 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -48,9 +48,9 @@ endif::git-format-patch[] --patience:: Generate a diff using the "patience diff" algorithm. ---stat[=width[,name-width]]:: +--stat[=<width>[,<name-width>]]:: Generate a diffstat. You can override the default - output width for 80-column terminal by `--stat=width`. + output width for 80-column terminal by `--stat=<width>`. The width of the filename part can be controlled by giving another width to it separated by a comma. @@ -66,14 +66,14 @@ endif::git-format-patch[] number of modified files, as well as number of added and deleted lines. ---dirstat[=limit]:: +--dirstat[=<limit>]:: Output the distribution of relative amount of changes (number of lines added or removed) for each sub-directory. Directories with changes below a cut-off percent (3% by default) are not shown. The cut-off percent - can be set with `--dirstat=limit`. Changes in a child directory is not + can be set with `--dirstat=<limit>`. Changes in a child directory are not counted for the parent directory, unless `--cumulative` is used. ---dirstat-by-file[=limit]:: +--dirstat-by-file[=<limit>]:: Same as `--dirstat`, but counts changed files instead of lines. --summary:: @@ -207,6 +207,7 @@ endif::git-format-patch[] digits can be specified with `--abbrev=<n>`. -B[<n>][/<m>]:: +--break-rewrites[=[<n>][/<m>]]:: Break complete rewrite changes into pairs of delete and create. This serves two purposes: + @@ -229,6 +230,7 @@ eligible for being picked up as a possible source of a rename to another file. -M[<n>]:: +--detect-renames[=<n>]:: ifndef::git-log[] Detect renames. endif::git-log[] @@ -244,23 +246,10 @@ endif::git-log[] hasn't changed. -C[<n>]:: +--detect-copies[=<n>]:: Detect copies as well as renames. See also `--find-copies-harder`. If `n` is specified, it has the same meaning as for `-M<n>`. -ifndef::git-format-patch[] ---diff-filter=[ACDMRTUXB*]:: - Select only files that are Added (`A`), Copied (`C`), - Deleted (`D`), Modified (`M`), Renamed (`R`), have their - type (i.e. regular file, symlink, submodule, ...) changed (`T`), - are Unmerged (`U`), are - Unknown (`X`), or have had their pairing Broken (`B`). - Any combination of the filter characters may be used. - When `*` (All-or-none) is added to the combination, all - paths are selected if there is any file that matches - other criteria in the comparison; if there is no file - that matches other criteria, nothing is selected. -endif::git-format-patch[] - --find-copies-harder:: For performance reasons, by default, `-C` option finds copies only if the original file of the copy was modified in the same @@ -278,6 +267,18 @@ endif::git-format-patch[] number. ifndef::git-format-patch[] +--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: + Select only files that are Added (`A`), Copied (`C`), + Deleted (`D`), Modified (`M`), Renamed (`R`), have their + type (i.e. regular file, symlink, submodule, ...) changed (`T`), + are Unmerged (`U`), are + Unknown (`X`), or have had their pairing Broken (`B`). + Any combination of the filter characters (including none) can be used. + When `*` (All-or-none) is added to the combination, all + paths are selected if there is any file that matches + other criteria in the comparison; if there is no file + that matches other criteria, nothing is selected. + -S<string>:: Look for differences that introduce or remove an instance of <string>. Note that this is different than the string simply diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 9e62f8778f..51297d09ec 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -14,7 +14,7 @@ SYNOPSIS [--ignore-date] [--ignore-space-change | --ignore-whitespace] [--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>] [--reject] [-q | --quiet] [--scissors | --no-scissors] - [<mbox> | <Maildir>...] + [(<mbox> | <Maildir>)...] 'git am' (--continue | --skip | --abort) DESCRIPTION @@ -25,7 +25,7 @@ current branch. OPTIONS ------- -<mbox>|<Maildir>...:: +(<mbox>|<Maildir>)...:: The list of mailbox files to read patches from. If you do not supply this argument, the command reads from the standard input. If you supply directories, they will be treated as Maildirs. diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 4a74b23d40..881652f490 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -12,10 +12,10 @@ SYNOPSIS 'git apply' [--stat] [--numstat] [--summary] [--check] [--index] [--apply] [--no-add] [--build-fake-ancestor=<file>] [-R | --reverse] [--allow-binary-replacement | --binary] [--reject] [-z] - [-pNUM] [-CNUM] [--inaccurate-eof] [--recount] [--cached] + [-p<n>] [-C<n>] [--inaccurate-eof] [--recount] [--cached] [--ignore-space-change | --ignore-whitespace ] - [--whitespace=<nowarn|warn|fix|error|error-all>] - [--exclude=PATH] [--include=PATH] [--directory=<root>] + [--whitespace=(nowarn|warn|fix|error|error-all)] + [--exclude=<path>] [--include=<path>] [--directory=<root>] [--verbose] [<patch>...] DESCRIPTION diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index 8d3e66626f..4163a1bcb1 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git archive' [--format=<fmt>] [--list] [--prefix=<prefix>/] [<extra>] [-o | --output=<file>] [--worktree-attributes] [--remote=<repo> [--exec=<git-upload-archive>]] <tree-ish> - [path...] + [<path>...] DESCRIPTION ----------- @@ -73,7 +73,7 @@ OPTIONS <tree-ish>:: The tree or commit to produce an archive for. -path:: +<path>:: Without an optional path parameter, all files and subdirectories of the current working directory are included in the archive. If one or more paths are specified, only these are included. diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 38e59afb34..6266a3a602 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -11,8 +11,8 @@ SYNOPSIS [verse] 'git bundle' create <file> <git-rev-list-args> 'git bundle' verify <file> -'git bundle' list-heads <file> [refname...] -'git bundle' unbundle <file> [refname...] +'git bundle' list-heads <file> [<refname>...] +'git bundle' unbundle <file> [<refname>...] DESCRIPTION ----------- @@ -68,7 +68,7 @@ unbundle <file>:: packaged. -[refname...]:: +[<refname>...]:: A list of references used to limit the references reported as available. This is principally of use to 'git fetch', which expects to receive only those references asked for and not diff --git a/Documentation/git-checkout-index.txt b/Documentation/git-checkout-index.txt index 62f9ab24c9..0c0a9c14bc 100644 --- a/Documentation/git-checkout-index.txt +++ b/Documentation/git-checkout-index.txt @@ -13,7 +13,7 @@ SYNOPSIS [--stage=<number>|all] [--temp] [-z] [--stdin] - [--] [<file>]* + [--] [<file>...] DESCRIPTION ----------- diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 349366ee1e..5dcf4278fc 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -8,7 +8,7 @@ git-commit-tree - Create a new commit object SYNOPSIS -------- -'git commit-tree' <tree> [-p <parent commit>]* < changelog +'git commit-tree' <tree> [(-p <parent commit>)...] < changelog DESCRIPTION ----------- diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 01c9f8eb9e..5054f790a1 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -9,15 +9,15 @@ SYNOPSIS -------- [verse] 'git daemon' [--verbose] [--syslog] [--export-all] - [--timeout=n] [--init-timeout=n] [--max-connections=n] - [--strict-paths] [--base-path=path] [--base-path-relaxed] - [--user-path | --user-path=path] - [--interpolated-path=pathtemplate] - [--reuseaddr] [--detach] [--pid-file=file] - [--enable=service] [--disable=service] - [--allow-override=service] [--forbid-override=service] - [--inetd | [--listen=host_or_ipaddr] [--port=n] [--user=user [--group=group]] - [directory...] + [--timeout=<n>] [--init-timeout=<n>] [--max-connections=<n>] + [--strict-paths] [--base-path=<path>] [--base-path-relaxed] + [--user-path | --user-path=<path>] + [--interpolated-path=<pathtemplate>] + [--reuseaddr] [--detach] [--pid-file=<file>] + [--enable=<service>] [--disable=<service>] + [--allow-override=<service>] [--forbid-override=<service>] + [--inetd | [--listen=<host_or_ipaddr>] [--port=<n>] [--user=<user> [--group=<group>]] + [<directory>...] DESCRIPTION ----------- @@ -48,7 +48,7 @@ OPTIONS 'git daemon' will refuse to start when this option is enabled and no whitelist is specified. ---base-path=path:: +--base-path=<path>:: Remap all the path requests as relative to the given path. This is sort of "GIT root" - if you run 'git daemon' with '--base-path=/srv/git' on example.com, then if you later try to pull @@ -61,7 +61,7 @@ OPTIONS This is useful for switching to --base-path usage, while still allowing the old paths. ---interpolated-path=pathtemplate:: +--interpolated-path=<pathtemplate>:: To support virtual hosting, an interpolated path template can be used to dynamically construct alternate paths. The template supports %H for the target hostname as supplied by the client but @@ -80,27 +80,28 @@ OPTIONS Have the server run as an inetd service. Implies --syslog. Incompatible with --port, --listen, --user and --group options. ---listen=host_or_ipaddr:: +--listen=<host_or_ipaddr>:: Listen on a specific IP address or hostname. IP addresses can be either an IPv4 address or an IPv6 address if supported. If IPv6 is not supported, then --listen=hostname is also not supported and --listen must be given an IPv4 address. + Can be given more than once. Incompatible with '--inetd' option. ---port=n:: +--port=<n>:: Listen on an alternative port. Incompatible with '--inetd' option. ---init-timeout=n:: +--init-timeout=<n>:: Timeout between the moment the connection is established and the client request is received (typically a rather low value, since that should be basically immediate). ---timeout=n:: +--timeout=<n>:: Timeout for specific client sub-requests. This includes the time it takes for the server to process the sub-request and the time spent waiting for the next client's request. ---max-connections=n:: +--max-connections=<n>:: Maximum number of concurrent clients, defaults to 32. Set it to zero for no limit. @@ -109,7 +110,7 @@ OPTIONS --verbose, thus by default only error conditions will be logged. --user-path:: ---user-path=path:: +--user-path=<path>:: Allow {tilde}user notation to be used in requests. When specified with no parameter, requests to git://host/{tilde}alice/foo is taken as a request to access @@ -129,12 +130,12 @@ OPTIONS --detach:: Detach from the shell. Implies --syslog. ---pid-file=file:: +--pid-file=<file>:: Save the process id in 'file'. Ignored when the daemon is run under `--inetd`. ---user=user:: ---group=group:: +--user=<user>:: +--group=<group>:: Change daemon's uid and gid before entering the service loop. When only `--user` is given without `--group`, the primary group ID for the user is used. The values of @@ -145,16 +146,16 @@ Giving these options is an error when used with `--inetd`; use the facility of inet daemon to achieve the same before spawning 'git daemon' if needed. ---enable=service:: ---disable=service:: +--enable=<service>:: +--disable=<service>:: Enable/disable the service site-wide per default. Note that a service disabled site-wide can still be enabled per repository if it is marked overridable and the repository enables the service with a configuration item. ---allow-override=service:: ---forbid-override=service:: +--allow-override=<service>:: +--forbid-override=<service>:: Allow/forbid overriding the site-wide default with per repository configuration. By default, all the services are overridable. diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index fcad113276..e05b686b1e 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -96,7 +96,7 @@ marks the same across runs. in the commit (as opposed to just listing the files which are different from the commit's first parent). -[git-rev-list-args...]:: +[<git-rev-list-args>...]:: A list of arguments, acceptable to 'git rev-parse' and 'git rev-list', that specifies the specific objects and references to export. For example, `master{tilde}10..master` causes the diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index 400fe7f956..d159e88292 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git fetch' [<options>] <group> -'git fetch' --multiple [<options>] [<repository> | <group>]... +'git fetch' --multiple [<options>] [(<repository> | <group>)...] 'git fetch' --all [<options>] diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index f51860de26..796e7489ff 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -117,7 +117,7 @@ OPTIONS This is the filter for performing the commit. If this filter is specified, it will be called instead of the 'git commit-tree' command, with arguments of the form - "<TREE_ID> [-p <PARENT_COMMIT_ID>]..." and the log message on + "<TREE_ID> [(-p <PARENT_COMMIT_ID>)...]" and the log message on stdin. The commit id is expected on stdout. + As a special extension, the commit filter may emit multiple diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index d66fd9d231..fac1cf55e5 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git for-each-ref' [--count=<count>] [--shell|--perl|--python|--tcl] - [--sort=<key>]* [--format=<format>] [<pattern>...] + [(--sort=<key>)...] [--format=<format>] [<pattern>...] DESCRIPTION ----------- diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index f3ccc72f0d..c2bb81042c 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -59,10 +59,10 @@ OPTIONS the newly constructed pack and index before refs can be updated to use objects contained in the pack. ---keep='why':: +--keep=<msg>:: Like --keep create a .keep file before moving the index into its final destination, but rather than creating an empty file - place 'why' followed by an LF into the .keep file. The 'why' + place '<msg>' followed by an LF into the .keep file. The '<msg>' message can later be searched for within all .keep files to locate any which have outlived their usefulness. diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 246b07ebf9..00d4a124c9 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -31,7 +31,7 @@ current working directory. Specify the directory from which templates will be used. (See the "TEMPLATE DIRECTORY" section below.) ---shared[={false|true|umask|group|all|world|everybody|0xxx}]:: +--shared[=(false|true|umask|group|all|world|everybody|0xxx)]:: Specify that the git repository is to be shared amongst several users. This allows users belonging to the same group to push into that diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 347f447986..86abd13451 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -17,7 +17,7 @@ SYNOPSIS [--exclude-per-directory=<file>] [--exclude-standard] [--error-unmatch] [--with-tree=<tree-ish>] - [--full-name] [--abbrev] [--] [<file>]* + [--full-name] [--abbrev] [--] [<file>...] DESCRIPTION ----------- diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index 1f89d36800..76ed625e7b 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -10,8 +10,8 @@ SYNOPSIS -------- [verse] 'git ls-tree' [-d] [-r] [-t] [-l] [-z] - [--name-only] [--name-status] [--full-name] [--full-tree] [--abbrev=[<n>]] - <tree-ish> [paths...] + [--name-only] [--name-status] [--full-name] [--full-tree] [--abbrev[=<n>]] + <tree-ish> [<path>...] DESCRIPTION ----------- @@ -19,11 +19,11 @@ Lists the contents of a given tree object, like what "/bin/ls -a" does in the current working directory. Note that: - the behaviour is slightly different from that of "/bin/ls" in that the - 'paths' denote just a list of patterns to match, e.g. so specifying + '<path>' denotes just a list of patterns to match, e.g. so specifying directory name (without '-r') will behave differently, and order of the arguments does not matter. - - the behaviour is similar to that of "/bin/ls" in that the 'paths' is + - the behaviour is similar to that of "/bin/ls" in that the '<path>' is taken as relative to the current working directory. E.g. when you are in a directory 'sub' that has a directory 'dir', you can run 'git ls-tree -r HEAD dir' to list the contents of the tree (that is @@ -72,7 +72,7 @@ OPTIONS Do not limit the listing to the current working directory. Implies --full-name. -paths:: +[<path>...]:: When paths are given, show them (note that this isn't really raw pathnames, but rather a list of patterns to match). Otherwise implicitly uses the root level of the tree as the sole path argument. diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt index a634485281..71912a19a4 100644 --- a/Documentation/git-mailsplit.txt +++ b/Documentation/git-mailsplit.txt @@ -7,7 +7,7 @@ git-mailsplit - Simple UNIX mbox splitter program SYNOPSIS -------- -'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [<mbox>|<Maildir>...] +'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [(<mbox>|<Maildir>)...] DESCRIPTION ----------- diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 84043cc5b2..d43416d299 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -59,13 +59,13 @@ include::merge-options.txt[] -m <msg>:: Set the commit message to be used for the merge commit (in case one is created). - - If `--log` is specified, a shortlog of the commits being merged - will be appended to the specified message. - - The 'git fmt-merge-msg' command can be - used to give a good default for automated 'git merge' - invocations. ++ +If `--log` is specified, a shortlog of the commits being merged +will be appended to the specified message. ++ +The 'git fmt-merge-msg' command can be +used to give a good default for automated 'git merge' +invocations. --rerere-autoupdate:: --no-rerere-autoupdate:: diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index e4ed016146..1f75a848ba 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -7,7 +7,7 @@ git-mergetool - Run merge conflict resolution tools to resolve merge conflicts SYNOPSIS -------- -'git mergetool' [--tool=<tool>] [-y|--no-prompt|--prompt] [<file>]... +'git mergetool' [--tool=<tool>] [-y|--no-prompt|--prompt] [<file>...] DESCRIPTION ----------- diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 8ed09c0b3c..65eff66afe 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -11,8 +11,8 @@ SYNOPSIS [verse] 'git pack-objects' [-q | --progress | --all-progress] [--all-progress-implied] [--no-reuse-delta] [--delta-base-offset] [--non-empty] - [--local] [--incremental] [--window=N] [--depth=N] - [--revs [--unpacked | --all]*] [--stdout | base-name] + [--local] [--incremental] [--window=<n>] [--depth=<n>] + [--revs [--unpacked | --all]] [--stdout | base-name] [--keep-true-parents] < object-list @@ -82,8 +82,8 @@ base-name:: reference was included in the resulting packfile. This can be useful to send new tags to native git clients. ---window=[N]:: ---depth=[N]:: +--window=<n>:: +--depth=<n>:: These two options affect how the objects contained in the pack are stored using delta compression. The objects are first internally sorted by type, size and @@ -95,10 +95,10 @@ base-name:: times to get to the necessary object. The default value for --window is 10 and --depth is 50. ---window-memory=[N]:: +--window-memory=<n>:: This option provides an additional limit on top of `--window`; the window size will dynamically scale down so as to not take - up more than N bytes in memory. This is useful in + up more than '<n>' bytes in memory. This is useful in repositories with a mix of large and small objects to not run out of memory with a large window, but still be able to take advantage of the large window for the smaller objects. The @@ -106,7 +106,7 @@ base-name:: `--window-memory=0` makes memory usage unlimited, which is the default. ---max-pack-size=[N]:: +--max-pack-size=<n>:: Maximum size of each output pack file. The size can be suffixed with "k", "m", or "g". The minimum size allowed is limited to 1 MiB. If specified, multiple packfiles may be created. @@ -171,7 +171,7 @@ base-name:: wholesale enforcement of a different compression level on the packed data is desired. ---compression=[N]:: +--compression=<n>:: Specifies compression level for newly-compressed data in the generated pack. If not specified, pack compression level is determined first by pack.compression, then by core.compression, diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index c50f7dcb89..e1b0bd2868 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -92,12 +92,14 @@ include::merge-options.txt[] :git-pull: 1 --rebase:: - Instead of a merge, perform a rebase after fetching. If - there is a remote ref for the upstream branch, and this branch - was rebased since last fetched, the rebase uses that information - to avoid rebasing non-local changes. To make this the default - for branch `<name>`, set configuration `branch.<name>.rebase` - to `true`. + Rebase the current branch on top of the upstream branch after + fetching. If there is a remote-tracking branch corresponding to + the upstream branch and the upstream branch was rebased since last + fetched, the rebase uses that information to avoid rebasing + non-local changes. ++ +See `branch.<name>.rebase` in linkgit:git-config[1] if you want to make +`git pull` always use `{litdd}rebase` instead of merging. + [NOTE] This is a potentially _dangerous_ mode of operation. diff --git a/Documentation/git-relink.txt b/Documentation/git-relink.txt index 8a5842bb93..8fc809f82b 100644 --- a/Documentation/git-relink.txt +++ b/Documentation/git-relink.txt @@ -7,7 +7,7 @@ git-relink - Hardlink common objects in local repositories SYNOPSIS -------- -'git relink' [--safe] <dir> [<dir>]* <master_dir> +'git relink' [--safe] <dir>... <master_dir> DESCRIPTION ----------- diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index aa021b0cb8..0d28febe1b 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -20,7 +20,7 @@ SYNOPSIS 'git remote set-url --delete' [--push] <name> <url> 'git remote' [-v | --verbose] 'show' [-n] <name> 'git remote prune' [-n | --dry-run] <name> -'git remote' [-v | --verbose] 'update' [-p | --prune] [group | remote]... +'git remote' [-v | --verbose] 'update' [-p | --prune] [(<group> | <remote>)...] DESCRIPTION ----------- diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 9566727f7a..27f7865b06 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -8,7 +8,7 @@ git-repack - Pack unpacked objects in a repository SYNOPSIS -------- -'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [--window=N] [--depth=N] +'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [--window=<n>] [--depth=<n>] DESCRIPTION ----------- @@ -80,8 +80,8 @@ other objects in that pack they already have locally. this repository (or a direct copy of it) over HTTP or FTP. See linkgit:git-update-server-info[1]. ---window=[N]:: ---depth=[N]:: +--window=<n>:: +--depth=<n>:: These two options affect how the objects contained in the pack are stored using delta compression. The objects are first internally sorted by type, size and optionally names and compared against the @@ -91,10 +91,10 @@ other objects in that pack they already have locally. to be applied that many times to get to the necessary object. The default value for --window is 10 and --depth is 50. ---window-memory=[N]:: +--window-memory=<n>:: This option provides an additional limit on top of `--window`; the window size will dynamically scale down so as to not take - up more than N bytes in memory. This is useful in + up more than '<n>' bytes in memory. This is useful in repositories with a mix of large and small objects to not run out of memory with a large window, but still be able to take advantage of the large window for the smaller objects. The @@ -102,7 +102,7 @@ other objects in that pack they already have locally. `--window-memory=0` makes memory usage unlimited, which is the default. ---max-pack-size=[N]:: +--max-pack-size=<n>:: Maximum size of each output pack file. The size can be suffixed with "k", "m", or "g". The minimum size allowed is limited to 1 MiB. If specified, multiple packfiles may be created. diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 173f3fc785..8e1e32908c 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -9,10 +9,10 @@ git-rev-list - Lists commit objects in reverse chronological order SYNOPSIS -------- [verse] -'git rev-list' [ \--max-count=number ] - [ \--skip=number ] - [ \--max-age=timestamp ] - [ \--min-age=timestamp ] +'git rev-list' [ \--max-count=<number> ] + [ \--skip=<number> ] + [ \--max-age=<timestamp> ] + [ \--min-age=<timestamp> ] [ \--sparse ] [ \--merges ] [ \--no-merges ] @@ -21,10 +21,10 @@ SYNOPSIS [ \--full-history ] [ \--not ] [ \--all ] - [ \--branches[=pattern] ] - [ \--tags[=pattern] ] - [ \--remotes[=pattern] ] - [ \--glob=glob-pattern ] + [ \--branches[=<pattern>] ] + [ \--tags[=<pattern>] ] + [ \--remotes[=<pattern>] ] + [ \--glob=<glob-pattern> ] [ \--stdin ] [ \--quiet ] [ \--topo-order ] @@ -37,7 +37,7 @@ SYNOPSIS [ \--regexp-ignore-case | -i ] [ \--extended-regexp | -E ] [ \--fixed-strings | -F ] - [ \--date={local|relative|default|iso|rfc|short} ] + [ \--date=(local|relative|default|iso|rfc|short) ] [ [\--objects | \--objects-edge] [ \--unpacked ] ] [ \--pretty | \--header ] [ \--bisect ] diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 341ca90c6e..4a27643c1e 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -95,7 +95,7 @@ OPTIONS unfortunately named tag "master"), and show them as full refnames (e.g. "refs/heads/master"). ---abbrev-ref[={strict|loose}]:: +--abbrev-ref[=(strict|loose)]:: A non-ambiguous short name of the objects name. The option core.warnAmbiguousRefs is used to select the strict abbreviation mode. diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index c283084272..05904e0e7f 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -97,7 +97,7 @@ See the CONFIGURATION section for 'sendemail.multiedit'. Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the value of the 'sendemail.to' configuration value; if that is unspecified, - this will be prompted for. + and --to-cmd is not specified, this will be prompted for. + The --to option must be repeated for each user you want on the to list. @@ -165,6 +165,15 @@ user is prompted for a password while the input is masked for privacy. are also accepted. The port can also be set with the 'sendemail.smtpserverport' configuration variable. +--smtp-server-option=<option>:: + If set, specifies the outgoing SMTP server option to use. + Default value can be specified by the 'sendemail.smtpserveroption' + configuration option. ++ +The --smtp-server-option option must be repeated for each option you want +to pass to the server. Likewise, different lines in the configuration files +must be used for each option. + --smtp-ssl:: Legacy alias for '--smtp-encryption ssl'. @@ -177,6 +186,12 @@ user is prompted for a password while the input is masked for privacy. Automating ~~~~~~~~~~ +--to-cmd=<command>:: + Specify a command to execute once per patch file which + should generate patch file specific "To:" entries. + Output of this command must be single email address per line. + Default is the value of 'sendemail.tocmd' configuration value. + --cc-cmd=<command>:: Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index bc1ac77495..5cc3baf48d 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -44,7 +44,7 @@ OPTIONS --email:: Show the email address of each author. ---format[='<format>']:: +--format[=<format>]:: Instead of the commit subject, use some other information to describe each commit. '<format>' can be any string accepted by the `--format` option of 'git log', such as '{asterisk} [%h] %s'. diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index 8dbcf1acd4..3b0c88271a 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -12,7 +12,7 @@ SYNOPSIS [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] - [<rev> | <glob>]... + [(<rev> | <glob>)...] 'git show-branch' (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>] diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index 2049c60f75..f0a8a1aff3 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -54,6 +54,10 @@ git show v1.0.0:: git show v1.0.0^\{tree\}:: Shows the tree pointed to by the tag `v1.0.0`. +git show -s --format=%s v1.0.0^\{commit\}:: + Shows the subject of the commit pointed to by the + tag `v1.0.0`. + git show next~10:Documentation/README:: Shows the contents of the file `Documentation/README` as they were current in the 10th last commit of the branch diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index be8a51fd06..139d314ba5 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -438,7 +438,7 @@ git rebase --onto remotes/git-svn A^ master OPTIONS ------- ---shared[={false|true|umask|group|all|world|everybody}]:: +--shared[=(false|true|umask|group|all|world|everybody)]:: --template=<template_directory>:: Only used with the 'init' command. These are passed directly to 'git init'. diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 26fd8d0df8..1ca56c85aa 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git update-index' [--add] [--remove | --force-remove] [--replace] [--refresh] [-q] [--unmerged] [--ignore-missing] - [--cacheinfo <mode> <object> <file>]* + [(--cacheinfo <mode> <object> <file>)...] [--chmod=(+|-)x] [--assume-unchanged | --no-assume-unchanged] [--skip-worktree | --no-skip-worktree] @@ -21,7 +21,7 @@ SYNOPSIS [--info-only] [--index-info] [-z] [--stdin] [--verbose] - [--] [<file>]* + [--] [<file>...] DESCRIPTION ----------- diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index e1586c78c3..51e8e0af1e 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -32,19 +32,19 @@ Custom commands may also be specified. OPTIONS ------- --b BROWSER:: ---browser=BROWSER:: - Use the specified BROWSER. It must be in the list of supported +-b <browser>:: +--browser=<browser>:: + Use the specified browser. It must be in the list of supported browsers. --t BROWSER:: ---tool=BROWSER:: +-t <browser>:: +--tool=<browser>:: Same as above. --c CONF.VAR:: ---config=CONF.VAR:: +-c <conf.var>:: +--config=<conf.var>:: CONF.VAR is looked up in the git config files. If it's set, - then its value specify the browser that should be used. + then its value specifies the browser that should be used. CONFIGURATION VARIABLES ----------------------- diff --git a/Documentation/git.txt b/Documentation/git.txt index b46c6f6d77..0c897df6a7 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -9,11 +9,11 @@ git - the stupid content tracker SYNOPSIS -------- [verse] -'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path] +'git' [--version] [--exec-path[=<path>]] [--html-path] [-p|--paginate|--no-pager] [--no-replace-objects] - [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE] - [-c name=value] - [--help] COMMAND [ARGS] + [--bare] [--git-dir=<path>] [--work-tree=<path>] + [-c <name>=<value>] + [--help] <command> [<args>] DESCRIPTION ----------- @@ -28,7 +28,7 @@ also want to read linkgit:gitcvs-migration[7]. See the link:user-manual.html[Git User's Manual] for a more in-depth introduction. -The COMMAND is either a name of a Git command (see below) or an alias +The '<command>' is either a name of a Git command (see below) or an alias as defined in the configuration file (see linkgit:git-config[1]). Formatted and hyperlinked version of the latest git @@ -44,9 +44,10 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.3.1/git.html[documentation for release 1.7.3.1] +* link:v1.7.3.2/git.html[documentation for release 1.7.3.2] * release notes for + link:RelNotes/1.7.3.2.txt[1.7.3.2], link:RelNotes/1.7.3.1.txt[1.7.3.1], link:RelNotes/1.7.3.txt[1.7.3]. @@ -252,7 +253,7 @@ help ...`. The <name> is expected in the same format as listed by 'git config' (subkeys separated by dots). ---exec-path:: +--exec-path[=<path>]:: Path to wherever your core git programs are installed. This can also be controlled by setting the GIT_EXEC_PATH environment variable. If no path is given, 'git' will print diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 049313d601..595a3cf1a7 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -40,6 +40,28 @@ the other tree did, declaring 'our' history contains all that happened in it. theirs;; This is opposite of 'ours'. +patience;; + With this option, 'merge-recursive' spends a little extra time + to avoid mismerges that sometimes occur due to unimportant + matching lines (e.g., braces from distinct functions). Use + this when the branches to be merged have diverged wildly. + See also linkgit:git-diff[1] `--patience`. + +ignore-space-change;; +ignore-all-space;; +ignore-space-at-eol;; + Treats lines with the indicated type of whitespace change as + unchanged for the sake of a three-way merge. Whitespace + changes mixed with other changes to a line are not ignored. + See also linkgit:git-diff[1] `-b`, `-w`, and + `--ignore-space-at-eol`. ++ +* If 'their' version only introduces whitespace changes to a line, + 'our' version is used; +* If 'our' version introduces whitespace changes but 'their' + version includes a substantial change, 'their' version is used; +* Otherwise, the merge proceeds in the usual way. + renormalize;; This runs a virtual check-out and check-in of all three stages of a file when resolving a three-way merge. This option is @@ -52,7 +74,11 @@ no-renormalize;; Disables the `renormalize` option. This overrides the `merge.renormalize` configuration variable. -subtree[=path];; +rename-threshold=<n>;; + Controls the similarity threshold used for rename detection. + See also linkgit:git-diff[1] `-M`. + +subtree[=<path>];; This option is a more advanced form of 'subtree' strategy, where the strategy makes a guess on how two trees must be shifted to match with each other when merging. Instead, the specified path diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 9b6f3899ec..50923e2ce9 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -1,5 +1,5 @@ ---pretty[='<format>']:: ---format='<format>':: +--pretty[=<format>]:: +--format=<format>:: Pretty-print the contents of the commit logs in a given format, where '<format>' can be one of 'oneline', 'short', 'medium', diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index ebc0108731..42ca059908 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -13,7 +13,7 @@ include::pretty-options.txt[] Synonym for `--date=relative`. ---date={relative,local,default,iso,rfc,short,raw}:: +--date=(relative|local|default|iso|rfc|short|raw):: Only takes effect for dates shown in human-readable format, such as when using "--pretty". `log.date` config variable sets a default @@ -95,6 +95,8 @@ you would get an output like this: to be printed in between commits, in order for the graph history to be drawn properly. + +This enables parent rewriting, see 'History Simplification' below. ++ This implies the '--topo-order' option by default, but the '--date-order' option may also be specified. @@ -146,6 +148,9 @@ options may be given. See linkgit:git-diff-files[1] for more options. -t:: Show the tree objects in the diff output. This implies '-r'. + +-s:: + Suppress diff output. endif::git-rev-list[] Commit Limiting @@ -246,29 +251,29 @@ endif::git-rev-list[] Pretend as if all the refs in `refs/` are listed on the command line as '<commit>'. ---branches[=pattern]:: +--branches[=<pattern>]:: Pretend as if all the refs in `refs/heads` are listed - on the command line as '<commit>'. If `pattern` is given, limit + on the command line as '<commit>'. If '<pattern>' is given, limit branches to ones matching given shell glob. If pattern lacks '?', '*', or '[', '/*' at the end is implied. ---tags[=pattern]:: +--tags[=<pattern>]:: Pretend as if all the refs in `refs/tags` are listed - on the command line as '<commit>'. If `pattern` is given, limit + on the command line as '<commit>'. If '<pattern>' is given, limit tags to ones matching given shell glob. If pattern lacks '?', '*', or '[', '/*' at the end is implied. ---remotes[=pattern]:: +--remotes[=<pattern>]:: Pretend as if all the refs in `refs/remotes` are listed - on the command line as '<commit>'. If `pattern`is given, limit + on the command line as '<commit>'. If '<pattern>' is given, limit remote tracking branches to ones matching given shell glob. If pattern lacks '?', '*', or '[', '/*' at the end is implied. ---glob=glob-pattern:: - Pretend as if all the refs matching shell glob `glob-pattern` +--glob=<glob-pattern>:: + Pretend as if all the refs matching shell glob '<glob-pattern>' are listed on the command line as '<commit>'. Leading 'refs/', is automatically prepended if missing. If pattern lacks '?', '*', or '[', '/*' at the end is implied. diff --git a/Documentation/technical/api-merge.txt b/Documentation/technical/api-merge.txt index a7e050bb7a..9dc1bed768 100644 --- a/Documentation/technical/api-merge.txt +++ b/Documentation/technical/api-merge.txt @@ -17,6 +17,40 @@ responsible for a few things. path-specific merge drivers (specified in `.gitattributes`) into account. +Data structures +--------------- + +* `mmbuffer_t`, `mmfile_t` + +These store data usable for use by the xdiff backend, for writing and +for reading, respectively. See `xdiff/xdiff.h` for the definitions +and `diff.c` for examples. + +* `struct ll_merge_options` + +This describes the set of options the calling program wants to affect +the operation of a low-level (single file) merge. Some options: + +`virtual_ancestor`:: + Behave as though this were part of a merge between common + ancestors in a recursive merge. + If a helper program is specified by the + `[merge "<driver>"] recursive` configuration, it will + be used (see linkgit:gitattributes[5]). + +`variant`:: + Resolve local conflicts automatically in favor + of one side or the other (as in 'git merge-file' + `--ours`/`--theirs`/`--union`). Can be `0`, + `XDL_MERGE_FAVOR_OURS`, `XDL_MERGE_FAVOR_THEIRS`, or + `XDL_MERGE_FAVOR_UNION`. + +`renormalize`:: + Resmudge and clean the "base", "theirs" and "ours" files + before merging. Use this when the merge is likely to have + overlapped with a change in smudge/clean or end-of-line + normalization rules. + Low-level (single file) merge ----------------------------- @@ -28,15 +62,24 @@ Low-level (single file) merge `.git/info/attributes` into account. Returns 0 for a clean merge. -The caller: +Calling sequence: -1. allocates an mmbuffer_t variable for the result; -2. allocates and fills variables with the file's original content - and two modified versions (using `read_mmfile`, for example); -3. calls ll_merge(); -4. reads the output from result_buf.ptr and result_buf.size; -5. releases buffers when finished (free(ancestor.ptr); free(ours.ptr); - free(theirs.ptr); free(result_buf.ptr);). +* Prepare a `struct ll_merge_options` to record options. + If you have no special requests, skip this and pass `NULL` + as the `opts` parameter to use the default options. + +* Allocate an mmbuffer_t variable for the result. + +* Allocate and fill variables with the file's original content + and two modified versions (using `read_mmfile`, for example). + +* Call `ll_merge()`. + +* Read the merged content from `result_buf.ptr` and `result_buf.size`. + +* Release buffers when finished. A simple + `free(ancestor.ptr); free(ours.ptr); free(theirs.ptr); + free(result_buf.ptr);` will do. If the modifications do not merge cleanly, `ll_merge` will return a nonzero value and `result_buf` will generally include a description of @@ -47,18 +90,6 @@ The `ancestor_label`, `our_label`, and `their_label` parameters are used to label the different sides of a conflict if the merge driver supports this. -The `flag` parameter is a bitfield: - - - The `LL_OPT_VIRTUAL_ANCESTOR` bit indicates whether this is an - internal merge to consolidate ancestors for a recursive merge. - - - The `LL_OPT_FAVOR_MASK` bits allow local conflicts to be automatically - resolved in favor of one side or the other (as in 'git merge-file' - `--ours`/`--theirs`/`--union`). - They can be populated by `create_ll_flag`, whose argument can be - `XDL_MERGE_FAVOR_OURS`, `XDL_MERGE_FAVOR_THEIRS`, or - `XDL_MERGE_FAVOR_UNION`. - Everything else --------------- diff --git a/Documentation/technical/api-sigchain.txt b/Documentation/technical/api-sigchain.txt new file mode 100644 index 0000000000..535cdff164 --- /dev/null +++ b/Documentation/technical/api-sigchain.txt @@ -0,0 +1,41 @@ +sigchain API +============ + +Code often wants to set a signal handler to clean up temporary files or +other work-in-progress when we die unexpectedly. For multiple pieces of +code to do this without conflicting, each piece of code must remember +the old value of the handler and restore it either when: + + 1. The work-in-progress is finished, and the handler is no longer + necessary. The handler should revert to the original behavior + (either another handler, SIG_DFL, or SIG_IGN). + + 2. The signal is received. We should then do our cleanup, then chain + to the next handler (or die if it is SIG_DFL). + +Sigchain is a tiny library for keeping a stack of handlers. Your handler +and installation code should look something like: + +------------------------------------------ + void clean_foo_on_signal(int sig) + { + clean_foo(); + sigchain_pop(sig); + raise(sig); + } + + void other_func() + { + sigchain_push_common(clean_foo_on_signal); + mess_up_foo(); + clean_foo(); + } +------------------------------------------ + +Handlers are given the typdef of sigchain_fun. This is the same type +that is given to signal() or sigaction(). It is perfectly reasonable to +push SIG_DFL or SIG_IGN onto the stack. + +You can sigchain_push and sigchain_pop individual signals. For +convenience, sigchain_push_common will push the handler onto the stack +for many common signals. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 77eb483b07..fc56da677c 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -3853,7 +3853,7 @@ You create a commit object by giving it the tree that describes the state at the time of the commit, and a list of parents: ------------------------------------------------- -$ git commit-tree <tree> -p <parent> [-p <parent2> ..] +$ git commit-tree <tree> -p <parent> [(-p <parent2>)...] ------------------------------------------------- and then giving the reason for the commit on stdin (either through @@ -67,10 +67,10 @@ Issues of note: - A POSIX-compliant shell is required to run many scripts needed for everyday use (e.g. "bisect", "pull"). - - "Perl" is needed to use some of the features (e.g. preparing a - partial commit using "git add -i/-p", interacting with svn - repositories with "git svn"). If you can live without these, use - NO_PERL. + - "Perl" version 5.8 or later is needed to use some of the + features (e.g. preparing a partial commit using "git add -i/-p", + interacting with svn repositories with "git svn"). If you can + live without these, use NO_PERL. - "openssl" library is used by git-imap-send to use IMAP over SSL. If you don't need it, use NO_OPENSSL. @@ -7,9 +7,9 @@ #include "unpack-trees.h" static char const * const archive_usage[] = { - "git archive [options] <tree-ish> [path...]", + "git archive [options] <tree-ish> [<path>...]", "git archive --list", - "git archive --remote <repo> [--exec <cmd>] [options] <tree-ish> [path...]", + "git archive --remote <repo> [--exec <cmd>] [options] <tree-ish> [<path>...]", "git archive --remote <repo> [--exec <cmd>] --list", NULL }; @@ -36,7 +36,7 @@ void finish_copy_notes_for_rewrite(struct notes_rewrite_cfg *c); extern int check_pager_config(const char *cmd); -extern int textconv_object(const char *path, const unsigned char *sha1, char **buf, unsigned long *buf_size); +extern int textconv_object(const char *path, unsigned mode, const unsigned char *sha1, char **buf, unsigned long *buf_size); extern int cmd_add(int argc, const char **argv, const char *prefix); extern int cmd_annotate(int argc, const char **argv, const char *prefix); diff --git a/builtin/apply.c b/builtin/apply.c index 23c18c573b..f051e66dcc 100644 --- a/builtin/apply.c +++ b/builtin/apply.c @@ -2645,6 +2645,12 @@ static int apply_binary_fragment(struct image *img, struct patch *patch) unsigned long len; void *dst; + if (!fragment) + return error("missing binary patch data for '%s'", + patch->new_name ? + patch->new_name : + patch->old_name); + /* Binary patch is irreversible without the optional second hunk */ if (apply_in_reverse) { if (!fragment->next) diff --git a/builtin/blame.c b/builtin/blame.c index 101535448f..f5fccc1f67 100644 --- a/builtin/blame.c +++ b/builtin/blame.c @@ -83,6 +83,7 @@ struct origin { struct commit *commit; mmfile_t file; unsigned char blob_sha1[20]; + unsigned mode; char path[FLEX_ARRAY]; }; @@ -92,6 +93,7 @@ struct origin { * Return 1 if the conversion succeeds, 0 otherwise. */ int textconv_object(const char *path, + unsigned mode, const unsigned char *sha1, char **buf, unsigned long *buf_size) @@ -100,7 +102,7 @@ int textconv_object(const char *path, struct userdiff_driver *textconv; df = alloc_filespec(path); - fill_filespec(df, sha1, S_IFREG | 0664); + fill_filespec(df, sha1, mode); textconv = get_textconv(df); if (!textconv) { free_filespec(df); @@ -125,7 +127,7 @@ static void fill_origin_blob(struct diff_options *opt, num_read_blob++; if (DIFF_OPT_TST(opt, ALLOW_TEXTCONV) && - textconv_object(o->path, o->blob_sha1, &file->ptr, &file_size)) + textconv_object(o->path, o->mode, o->blob_sha1, &file->ptr, &file_size)) ; else file->ptr = read_sha1_file(o->blob_sha1, &type, &file_size); @@ -313,21 +315,23 @@ static struct origin *get_origin(struct scoreboard *sb, * for an origin is also used to pass the blame for the entire file to * the parent to detect the case where a child's blob is identical to * that of its parent's. + * + * This also fills origin->mode for corresponding tree path. */ -static int fill_blob_sha1(struct origin *origin) +static int fill_blob_sha1_and_mode(struct origin *origin) { - unsigned mode; if (!is_null_sha1(origin->blob_sha1)) return 0; if (get_tree_entry(origin->commit->object.sha1, origin->path, - origin->blob_sha1, &mode)) + origin->blob_sha1, &origin->mode)) goto error_out; if (sha1_object_info(origin->blob_sha1, NULL) != OBJ_BLOB) goto error_out; return 0; error_out: hashclr(origin->blob_sha1); + origin->mode = S_IFINVALID; return -1; } @@ -360,12 +364,14 @@ static struct origin *find_origin(struct scoreboard *sb, /* * If the origin was newly created (i.e. get_origin * would call make_origin if none is found in the - * scoreboard), it does not know the blob_sha1, + * scoreboard), it does not know the blob_sha1/mode, * so copy it. Otherwise porigin was in the - * scoreboard and already knows blob_sha1. + * scoreboard and already knows blob_sha1/mode. */ - if (porigin->refcnt == 1) + if (porigin->refcnt == 1) { hashcpy(porigin->blob_sha1, cached->blob_sha1); + porigin->mode = cached->mode; + } return porigin; } /* otherwise it was not very useful; free it */ @@ -400,6 +406,7 @@ static struct origin *find_origin(struct scoreboard *sb, /* The path is the same as parent */ porigin = get_origin(sb, parent, origin->path); hashcpy(porigin->blob_sha1, origin->blob_sha1); + porigin->mode = origin->mode; } else { /* * Since origin->path is a pathspec, if the parent @@ -425,6 +432,7 @@ static struct origin *find_origin(struct scoreboard *sb, case 'M': porigin = get_origin(sb, parent, origin->path); hashcpy(porigin->blob_sha1, p->one->sha1); + porigin->mode = p->one->mode; break; case 'A': case 'T': @@ -444,6 +452,7 @@ static struct origin *find_origin(struct scoreboard *sb, cached = make_origin(porigin->commit, porigin->path); hashcpy(cached->blob_sha1, porigin->blob_sha1); + cached->mode = porigin->mode; parent->util = cached; } return porigin; @@ -486,6 +495,7 @@ static struct origin *find_rename(struct scoreboard *sb, !strcmp(p->two->path, origin->path)) { porigin = get_origin(sb, parent, p->one->path); hashcpy(porigin->blob_sha1, p->one->sha1); + porigin->mode = p->one->mode; break; } } @@ -1099,6 +1109,7 @@ static int find_copy_in_parent(struct scoreboard *sb, norigin = get_origin(sb, parent, p->one->path); hashcpy(norigin->blob_sha1, p->one->sha1); + norigin->mode = p->one->mode; fill_origin_blob(&sb->revs->diffopt, norigin, &file_p); if (!file_p.ptr) continue; @@ -2075,7 +2086,7 @@ static struct commit *fake_working_tree_commit(struct diff_options *opt, switch (st.st_mode & S_IFMT) { case S_IFREG: if (DIFF_OPT_TST(opt, ALLOW_TEXTCONV) && - textconv_object(read_from, null_sha1, &buf.buf, &buf_len)) + textconv_object(read_from, mode, null_sha1, &buf.buf, &buf_len)) buf.len = buf_len; else if (strbuf_read_file(&buf, read_from, st.st_size) != st.st_size) die_errno("cannot open or read '%s'", read_from); @@ -2455,11 +2466,11 @@ parse_done: } else { o = get_origin(&sb, sb.final, path); - if (fill_blob_sha1(o)) + if (fill_blob_sha1_and_mode(o)) die("no such path %s in %s", path, final_commit_name); if (DIFF_OPT_TST(&sb.revs->diffopt, ALLOW_TEXTCONV) && - textconv_object(path, o->blob_sha1, (char **) &sb.final_buf, + textconv_object(path, o->mode, o->blob_sha1, (char **) &sb.final_buf, &sb.final_buf_size)) ; else diff --git a/builtin/bundle.c b/builtin/bundle.c index 80649ba0b2..9b87fb9ac2 100644 --- a/builtin/bundle.c +++ b/builtin/bundle.c @@ -12,8 +12,8 @@ static const char builtin_bundle_usage[] = "git bundle create <file> <git-rev-list args>\n" " or: git bundle verify <file>\n" - " or: git bundle list-heads <file> [refname...]\n" - " or: git bundle unbundle <file> [refname...]"; + " or: git bundle list-heads <file> [<refname>...]\n" + " or: git bundle unbundle <file> [<refname>...]"; int cmd_bundle(int argc, const char **argv, const char *prefix) { diff --git a/builtin/cat-file.c b/builtin/cat-file.c index 76ec3fec92..94632dbdb4 100644 --- a/builtin/cat-file.c +++ b/builtin/cat-file.c @@ -143,7 +143,7 @@ static int cat_one_file(int opt, const char *exp_type, const char *obj_name) die("git cat-file --textconv %s: <object> must be <sha1:path>", obj_name); - if (!textconv_object(obj_context.path, sha1, &buf, &size)) + if (!textconv_object(obj_context.path, obj_context.mode, sha1, &buf, &size)) die("git cat-file --textconv: unable to run textconv on %s", obj_name); break; diff --git a/builtin/checkout-index.c b/builtin/checkout-index.c index a7a5ee10f3..65cbee0552 100644 --- a/builtin/checkout-index.c +++ b/builtin/checkout-index.c @@ -155,7 +155,7 @@ static void checkout_all(const char *prefix, int prefix_length) } static const char * const builtin_checkout_index_usage[] = { - "git checkout-index [options] [--] <file>...", + "git checkout-index [options] [--] [<file>...]", NULL }; diff --git a/builtin/checkout.c b/builtin/checkout.c index a54583b3a4..9240fafb2a 100644 --- a/builtin/checkout.c +++ b/builtin/checkout.c @@ -161,7 +161,7 @@ static int checkout_merged(int pos, struct checkout *state) * merge.renormalize set, too */ status = ll_merge(&result_buf, path, &ancestor, "base", - &ours, "ours", &theirs, "theirs", 0); + &ours, "ours", &theirs, "theirs", NULL); free(ancestor.ptr); free(ours.ptr); free(theirs.ptr); diff --git a/builtin/clean.c b/builtin/clean.c index c8798f549e..fb24030751 100644 --- a/builtin/clean.c +++ b/builtin/clean.c @@ -38,7 +38,7 @@ int cmd_clean(int argc, const char **argv, const char *prefix) { int i; int show_only = 0, remove_directories = 0, quiet = 0, ignored = 0; - int ignored_only = 0, baselen = 0, config_set = 0, errors = 0; + int ignored_only = 0, config_set = 0, errors = 0; int rm_flags = REMOVE_DIR_KEEP_NESTED_GIT; struct strbuf directory = STRBUF_INIT; struct dir_struct dir; @@ -138,7 +138,7 @@ int cmd_clean(int argc, const char **argv, const char *prefix) if (pathspec) { memset(seen, 0, argc > 0 ? argc : 1); matches = match_pathspec(pathspec, ent->name, len, - baselen, seen); + 0, seen); } if (S_ISDIR(st.st_mode)) { @@ -153,7 +153,7 @@ int cmd_clean(int argc, const char **argv, const char *prefix) printf("Removing %s\n", qname); if (remove_dir_recursively(&directory, rm_flags) != 0) { - warning("failed to remove '%s'", qname); + warning("failed to remove %s", qname); errors++; } } else if (show_only) { @@ -173,7 +173,7 @@ int cmd_clean(int argc, const char **argv, const char *prefix) printf("Removing %s\n", qname); } if (unlink(ent->name) != 0) { - warning("failed to remove '%s'", qname); + warning("failed to remove %s", qname); errors++; } } diff --git a/builtin/commit-tree.c b/builtin/commit-tree.c index 732f8952bb..d083795e26 100644 --- a/builtin/commit-tree.c +++ b/builtin/commit-tree.c @@ -9,7 +9,7 @@ #include "builtin.h" #include "utf8.h" -static const char commit_tree_usage[] = "git commit-tree <sha1> [-p <sha1>]* < changelog"; +static const char commit_tree_usage[] = "git commit-tree <sha1> [(-p <sha1>)...] < changelog"; static void new_parent(struct commit *parent, struct commit_list **parents_p) { diff --git a/builtin/fetch.c b/builtin/fetch.c index 6fc5047703..d35f000c03 100644 --- a/builtin/fetch.c +++ b/builtin/fetch.c @@ -16,7 +16,7 @@ static const char * const builtin_fetch_usage[] = { "git fetch [<options>] [<repository> [<refspec>...]]", "git fetch [<options>] <group>", - "git fetch --multiple [<options>] [<repository> | <group>]...", + "git fetch --multiple [<options>] [(<repository> | <group>)...]", "git fetch --all [<options>]", NULL }; diff --git a/builtin/grep.c b/builtin/grep.c index da32f3df34..3d5f6ace97 100644 --- a/builtin/grep.c +++ b/builtin/grep.c @@ -24,7 +24,7 @@ #endif static char const * const grep_usage[] = { - "git grep [options] [-e] <pattern> [<rev>...] [[--] path...]", + "git grep [options] [-e] <pattern> [<rev>...] [[--] <path>...]", NULL }; diff --git a/builtin/index-pack.c b/builtin/index-pack.c index e243d9d22e..8dc5c0b541 100644 --- a/builtin/index-pack.c +++ b/builtin/index-pack.c @@ -11,7 +11,7 @@ #include "exec_cmd.h" static const char index_pack_usage[] = -"git index-pack [-v] [-o <index-file>] [{ --keep | --keep=<msg> }] [--strict] { <pack-file> | --stdin [--fix-thin] [<pack-file>] }"; +"git index-pack [-v] [-o <index-file>] [ --keep | --keep=<msg> ] [--strict] (<pack-file> | --stdin [--fix-thin] [<pack-file>])"; struct object_entry { diff --git a/builtin/ls-files.c b/builtin/ls-files.c index bb4f612b3d..6a307ab784 100644 --- a/builtin/ls-files.c +++ b/builtin/ls-files.c @@ -424,7 +424,7 @@ int report_path_error(const char *ps_matched, const char **pathspec, int prefix_ } static const char * const ls_files_usage[] = { - "git ls-files [options] [<file>]*", + "git ls-files [options] [<file>...]", NULL }; diff --git a/builtin/ls-tree.c b/builtin/ls-tree.c index a8187568bf..f73e6bd962 100644 --- a/builtin/ls-tree.c +++ b/builtin/ls-tree.c @@ -24,7 +24,7 @@ static int chomp_prefix; static const char *ls_tree_prefix; static const char * const ls_tree_usage[] = { - "git ls-tree [<options>] <tree-ish> [path...]", + "git ls-tree [<options>] <tree-ish> [<path>...]", NULL }; diff --git a/builtin/mailsplit.c b/builtin/mailsplit.c index 99654d0222..2d4327801e 100644 --- a/builtin/mailsplit.c +++ b/builtin/mailsplit.c @@ -10,7 +10,7 @@ #include "strbuf.h" static const char git_mailsplit_usage[] = -"git mailsplit [-d<prec>] [-f<n>] [-b] [--keep-cr] -o<directory> [<mbox>|<Maildir>...]"; +"git mailsplit [-d<prec>] [-f<n>] [-b] [--keep-cr] -o<directory> [(<mbox>|<Maildir>)...]"; static int is_from_line(const char *line, int len) { diff --git a/builtin/merge-file.c b/builtin/merge-file.c index b6664d49be..6c4afb5a38 100644 --- a/builtin/merge-file.c +++ b/builtin/merge-file.c @@ -28,6 +28,7 @@ int cmd_merge_file(int argc, const char **argv, const char *prefix) xmparam_t xmp = {{0}}; int ret = 0, i = 0, to_stdout = 0; int quiet = 0; + int prefixlen = 0; struct option options[] = { OPT_BOOLEAN('p', "stdout", &to_stdout, "send results to standard output"), OPT_SET_INT(0, "diff3", &xmp.style, "use a diff3 based merge", XDL_MERGE_DIFF3), @@ -65,10 +66,14 @@ int cmd_merge_file(int argc, const char **argv, const char *prefix) "%s\n", strerror(errno)); } + if (prefix) + prefixlen = strlen(prefix); + for (i = 0; i < 3; i++) { + const char *fname = prefix_filename(prefix, prefixlen, argv[i]); if (!names[i]) names[i] = argv[i]; - if (read_mmfile(mmfs + i, argv[i])) + if (read_mmfile(mmfs + i, fname)) return -1; if (buffer_is_binary(mmfs[i].ptr, mmfs[i].size)) return error("Cannot merge binary files: %s\n", diff --git a/builtin/merge-recursive.c b/builtin/merge-recursive.c index 78b9db76a0..c33091b3ed 100644 --- a/builtin/merge-recursive.c +++ b/builtin/merge-recursive.c @@ -2,6 +2,7 @@ #include "commit.h" #include "tag.h" #include "merge-recursive.h" +#include "xdiff-interface.h" static const char builtin_merge_recursive_usage[] = "git %s <base>... -- <head> <remote> ..."; @@ -40,19 +41,7 @@ int cmd_merge_recursive(int argc, const char **argv, const char *prefix) if (!prefixcmp(arg, "--")) { if (!arg[2]) break; - if (!strcmp(arg+2, "ours")) - o.recursive_variant = MERGE_RECURSIVE_OURS; - else if (!strcmp(arg+2, "theirs")) - o.recursive_variant = MERGE_RECURSIVE_THEIRS; - else if (!strcmp(arg+2, "subtree")) - o.subtree_shift = ""; - else if (!prefixcmp(arg+2, "subtree=")) - o.subtree_shift = arg + 10; - else if (!strcmp(arg+2, "renormalize")) - o.renormalize = 1; - else if (!strcmp(arg+2, "no-renormalize")) - o.renormalize = 0; - else + if (parse_merge_opt(&o, arg + 2)) die("Unknown option %s", arg); continue; } diff --git a/builtin/merge.c b/builtin/merge.c index 2dba3b9901..10f091b519 100644 --- a/builtin/merge.c +++ b/builtin/merge.c @@ -639,25 +639,9 @@ static int try_merge_strategy(const char *strategy, struct commit_list *common, o.renormalize = option_renormalize; - /* - * NEEDSWORK: merge with table in builtin/merge-recursive - */ - for (x = 0; x < xopts_nr; x++) { - if (!strcmp(xopts[x], "ours")) - o.recursive_variant = MERGE_RECURSIVE_OURS; - else if (!strcmp(xopts[x], "theirs")) - o.recursive_variant = MERGE_RECURSIVE_THEIRS; - else if (!strcmp(xopts[x], "subtree")) - o.subtree_shift = ""; - else if (!prefixcmp(xopts[x], "subtree=")) - o.subtree_shift = xopts[x]+8; - else if (!strcmp(xopts[x], "renormalize")) - o.renormalize = 1; - else if (!strcmp(xopts[x], "no-renormalize")) - o.renormalize = 0; - else + for (x = 0; x < xopts_nr; x++) + if (parse_merge_opt(&o, xopts[x])) die("Unknown option for merge-recursive: -X%s", xopts[x]); - } o.branch1 = head_arg; o.branch2 = remoteheads->item->util; diff --git a/builtin/pack-objects.c b/builtin/pack-objects.c index d5a8db1bb6..f8eba53c82 100644 --- a/builtin/pack-objects.c +++ b/builtin/pack-objects.c @@ -23,15 +23,15 @@ #endif static const char pack_usage[] = - "git pack-objects [{ -q | --progress | --all-progress }]\n" + "git pack-objects [ -q | --progress | --all-progress ]\n" " [--all-progress-implied]\n" - " [--max-pack-size=N] [--local] [--incremental]\n" - " [--window=N] [--window-memory=N] [--depth=N]\n" + " [--max-pack-size=<n>] [--local] [--incremental]\n" + " [--window=<n>] [--window-memory=<n>] [--depth=<n>]\n" " [--no-reuse-delta] [--no-reuse-object] [--delta-base-offset]\n" - " [--threads=N] [--non-empty] [--revs [--unpacked | --all]*]\n" + " [--threads=<n>] [--non-empty] [--revs [--unpacked | --all]]\n" " [--reflog] [--stdout | base-name] [--include-tag]\n" " [--keep-unreachable | --unpack-unreachable]\n" - " [<ref-list | <object-list]"; + " [< ref-list | < object-list]"; struct object_entry { struct pack_idx_entry idx; diff --git a/builtin/remote.c b/builtin/remote.c index 48e0a6bf26..e9a6e09257 100644 --- a/builtin/remote.c +++ b/builtin/remote.c @@ -15,7 +15,7 @@ static const char * const builtin_remote_usage[] = { "git remote set-head <name> (-a | -d | <branch>)", "git remote [-v | --verbose] show [-n] <name>", "git remote prune [-n | --dry-run] <name>", - "git remote [-v | --verbose] update [-p | --prune] [group | remote]", + "git remote [-v | --verbose] update [-p | --prune] [(<group> | <remote>)...]", "git remote set-branches <name> [--add] <branch>...", "git remote set-url <name> <newurl> [<oldurl>]", "git remote set-url --add <name> <newurl>", diff --git a/builtin/rev-list.c b/builtin/rev-list.c index efe9360e2f..ba27d39f97 100644 --- a/builtin/rev-list.c +++ b/builtin/rev-list.c @@ -11,9 +11,9 @@ static const char rev_list_usage[] = "git rev-list [OPTION] <commit-id>... [ -- paths... ]\n" " limiting output:\n" -" --max-count=nr\n" -" --max-age=epoch\n" -" --min-age=epoch\n" +" --max-count=<n>\n" +" --max-age=<epoch>\n" +" --min-age=<epoch>\n" " --sparse\n" " --no-merges\n" " --remove-empty\n" @@ -33,7 +33,7 @@ static const char rev_list_usage[] = " --objects | --objects-edge\n" " --unpacked\n" " --header | --pretty\n" -" --abbrev=nr | --no-abbrev\n" +" --abbrev=<n> | --no-abbrev\n" " --abbrev-commit\n" " --left-right\n" " special purpose:\n" @@ -147,8 +147,10 @@ static void show_commit(struct commit *commit, void *data) } } else { if (revs->commit_format != CMIT_FMT_USERFORMAT || - buf.len) - printf("%s%c", buf.buf, info->hdr_termination); + buf.len) { + fwrite(buf.buf, 1, buf.len, stdout); + putchar(info->hdr_termination); + } } strbuf_release(&buf); } else { diff --git a/builtin/send-pack.c b/builtin/send-pack.c index 481602d8ae..2cd1c40b70 100644 --- a/builtin/send-pack.c +++ b/builtin/send-pack.c @@ -48,6 +48,7 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext NULL, NULL, NULL, + NULL, }; struct child_process po; int i; @@ -59,6 +60,8 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext argv[i++] = "--delta-base-offset"; if (args->quiet) argv[i++] = "-q"; + if (args->progress) + argv[i++] = "--progress"; memset(&po, 0, sizeof(po)); po.argv = argv; po.in = -1; @@ -101,7 +104,7 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext } if (finish_command(&po)) - return error("pack-objects died with strange error"); + return -1; return 0; } diff --git a/builtin/show-branch.c b/builtin/show-branch.c index e8719aa9e9..8663ccaa99 100644 --- a/builtin/show-branch.c +++ b/builtin/show-branch.c @@ -6,7 +6,7 @@ #include "parse-options.h" static const char* show_branch_usage[] = { - "git show-branch [-a|--all] [-r|--remotes] [--topo-order | --date-order] [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]...", + "git show-branch [-a|--all] [-r|--remotes] [--topo-order | --date-order] [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [(<rev> | <glob>)...]", "git show-branch (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>]", NULL }; diff --git a/builtin/update-index.c b/builtin/update-index.c index 3ab214d24e..62d9f3f0fa 100644 --- a/builtin/update-index.c +++ b/builtin/update-index.c @@ -398,7 +398,7 @@ static void read_index_info(int line_termination) } static const char update_index_usage[] = -"git update-index [-q] [--add] [--replace] [--remove] [--unmerged] [--refresh] [--really-refresh] [--cacheinfo] [--chmod=(+|-)x] [--assume-unchanged] [--skip-worktree|--no-skip-worktree] [--info-only] [--force-remove] [--stdin] [--index-info] [--unresolve] [--again | -g] [--ignore-missing] [-z] [--verbose] [--] <file>..."; +"git update-index [-q] [--add] [--replace] [--remove] [--unmerged] [--refresh] [--really-refresh] [--cacheinfo] [--chmod=(+|-)x] [--assume-unchanged] [--skip-worktree|--no-skip-worktree] [--info-only] [--force-remove] [--stdin] [--index-info] [--unresolve] [--again | -g] [--ignore-missing] [-z] [--verbose] [--] [<file>...]"; static unsigned char head_sha1[20]; static unsigned char merge_head_sha1[20]; diff --git a/contrib/ciabot/ciabot.py b/contrib/ciabot/ciabot.py index d0627e0852..9775dffb5d 100755 --- a/contrib/ciabot/ciabot.py +++ b/contrib/ciabot/ciabot.py @@ -122,7 +122,7 @@ def report(refname, merged): branch = os.path.basename(refname) # Compute a shortnane for the revision - rev = do("git describe ${merged} 2>/dev/null") or merged[:12] + rev = do("git describe '"+ merged +"' 2>/dev/null") or merged[:12] # Extract the neta-information for the commit rawcommit = do("git cat-file commit " + merged) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index f83f019ca9..f71046947f 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -21,6 +21,11 @@ # 2) Added the following line to your .bashrc: # source ~/.git-completion.sh # +# Or, add the following lines to your .zshrc: +# autoload bashcompinit +# bashcompinit +# source ~/.git-completion.sh +# # 3) Consider changing your PS1 to also show the current branch: # PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ ' # @@ -138,11 +143,12 @@ __git_ps1_show_upstream () # get the upstream from the "git-svn-id: ..." in a commit message # (git-svn uses essentially the same procedure internally) local svn_upstream=($(git log --first-parent -1 \ - --grep="^git-svn-id: \(${svn_url_pattern:2}\)" 2>/dev/null)) + --grep="^git-svn-id: \(${svn_url_pattern#??}\)" 2>/dev/null)) if [[ 0 -ne ${#svn_upstream[@]} ]]; then svn_upstream=${svn_upstream[ ${#svn_upstream[@]} - 2 ]} svn_upstream=${svn_upstream%@*} - for ((n=1; "$n" <= "${#svn_remote[@]}"; ++n)); do + local n_stop="${#svn_remote[@]}" + for ((n=1; n <= n_stop; ++n)); do svn_upstream=${svn_upstream#${svn_remote[$n]}} done @@ -380,16 +386,19 @@ __git_tags () done } -# __git_refs accepts 0 or 1 arguments (to pass to __gitdir) +# __git_refs accepts 0, 1 (to pass to __gitdir), or 2 arguments +# presence of 2nd argument means use the guess heuristic employed +# by checkout for tracking branches __git_refs () { - local i is_hash=y dir="$(__gitdir "${1-}")" + local i is_hash=y dir="$(__gitdir "${1-}")" track="${2-}" local cur="${COMP_WORDS[COMP_CWORD]}" format refs if [ -d "$dir" ]; then case "$cur" in refs|refs/*) format="refname" refs="${cur%/*}" + track="" ;; *) for i in HEAD FETCH_HEAD ORIG_HEAD MERGE_HEAD; do @@ -401,6 +410,21 @@ __git_refs () esac git --git-dir="$dir" for-each-ref --format="%($format)" \ $refs + if [ -n "$track" ]; then + # employ the heuristic used by git checkout + # Try to find a remote branch that matches the completion word + # but only output if the branch name is unique + local ref entry + git --git-dir="$dir" for-each-ref --shell --format="ref=%(refname:short)" \ + "refs/remotes/" | \ + while read entry; do + eval "$entry" + ref="${ref#*/}" + if [[ "$ref" == "$cur"* ]]; then + echo "$ref" + fi + done | uniq -u + fi return fi for i in $(git ls-remote "$dir" 2>/dev/null); do @@ -750,6 +774,19 @@ __git_compute_porcelain_commands () : ${__git_porcelain_commands:=$(__git_list_porcelain_commands)} } +__git_pretty_aliases () +{ + local i IFS=$'\n' + for i in $(git --git-dir="$(__gitdir)" config --get-regexp "pretty\..*" 2>/dev/null); do + case "$i" in + pretty.*) + i="${i#pretty.}" + echo "${i/ */}" + ;; + esac + done +} + __git_aliases () { local i IFS=$'\n' @@ -907,12 +944,16 @@ _git_bisect () local subcommands="start bad good skip reset visualize replay log run" local subcommand="$(__git_find_on_cmdline "$subcommands")" if [ -z "$subcommand" ]; then - __gitcomp "$subcommands" + if [ -f "$(__gitdir)"/BISECT_START ]; then + __gitcomp "$subcommands" + else + __gitcomp "replay start" + fi return fi case "$subcommand" in - bad|good|reset|skip) + bad|good|reset|skip|start) __gitcomp "$(__git_refs)" ;; *) @@ -988,7 +1029,13 @@ _git_checkout () " ;; *) - __gitcomp "$(__git_refs)" + # check if --track, --no-track, or --no-guess was specified + # if so, disable DWIM mode + local flags="--track --no-track --no-guess" track=1 + if [ -n "$(__git_find_on_cmdline "$flags")" ]; then + track='' + fi + __gitcomp "$(__git_refs '' $track)" ;; esac } @@ -1368,12 +1415,12 @@ _git_log () fi case "$cur" in --pretty=*) - __gitcomp "$__git_log_pretty_formats + __gitcomp "$__git_log_pretty_formats $(__git_pretty_aliases) " "" "${cur##--pretty=}" return ;; --format=*) - __gitcomp "$__git_log_pretty_formats + __gitcomp "$__git_log_pretty_formats $(__git_pretty_aliases) " "" "${cur##--format=}" return ;; @@ -1468,18 +1515,50 @@ _git_name_rev () _git_notes () { - local subcommands="edit show" - if [ -z "$(__git_find_on_cmdline "$subcommands")" ]; then - __gitcomp "$subcommands" - return - fi + local subcommands='add append copy edit list prune remove show' + local subcommand="$(__git_find_on_cmdline "$subcommands")" + local cur="${COMP_WORDS[COMP_CWORD]}" - case "${COMP_WORDS[COMP_CWORD-1]}" in - -m|-F) - COMPREPLY=() + case "$subcommand,$cur" in + ,--*) + __gitcomp '--ref' + ;; + ,*) + case "${COMP_WORDS[COMP_CWORD-1]}" in + --ref) + __gitcomp "$(__git_refs)" + ;; + *) + __gitcomp "$subcommands --ref" + ;; + esac + ;; + add,--reuse-message=*|append,--reuse-message=*) + __gitcomp "$(__git_refs)" "" "${cur##--reuse-message=}" + ;; + add,--reedit-message=*|append,--reedit-message=*) + __gitcomp "$(__git_refs)" "" "${cur##--reedit-message=}" + ;; + add,--*|append,--*) + __gitcomp '--file= --message= --reedit-message= + --reuse-message=' + ;; + copy,--*) + __gitcomp '--stdin' + ;; + prune,--*) + __gitcomp '--dry-run --verbose' + ;; + prune,*) ;; *) - __gitcomp "$(__git_refs)" + case "${COMP_WORDS[COMP_CWORD-1]}" in + -m|-F) + ;; + *) + __gitcomp "$(__git_refs)" + ;; + esac ;; esac } @@ -2100,12 +2179,12 @@ _git_show () local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --pretty=*) - __gitcomp "$__git_log_pretty_formats + __gitcomp "$__git_log_pretty_formats $(__git_pretty_aliases) " "" "${cur##--pretty=}" return ;; --format=*) - __gitcomp "$__git_log_pretty_formats + __gitcomp "$__git_log_pretty_formats $(__git_pretty_aliases) " "" "${cur##--format=}" return ;; @@ -2339,6 +2418,11 @@ _git () { local i c=1 command __git_dir + if [[ -n ${ZSH_VERSION-} ]]; then + emulate -L bash + setopt KSH_TYPESET + fi + while [ $c -lt $COMP_CWORD ]; do i="${COMP_WORDS[c]}" case "$i" in @@ -2372,17 +2456,22 @@ _git () fi local completion_func="_git_${command//-/_}" - declare -F $completion_func >/dev/null && $completion_func && return + declare -f $completion_func >/dev/null && $completion_func && return local expansion=$(__git_aliased_command "$command") if [ -n "$expansion" ]; then completion_func="_git_${expansion//-/_}" - declare -F $completion_func >/dev/null && $completion_func + declare -f $completion_func >/dev/null && $completion_func fi } _gitk () { + if [[ -n ${ZSH_VERSION-} ]]; then + emulate -L bash + setopt KSH_TYPESET + fi + __git_has_doubledash && return local cur="${COMP_WORDS[COMP_CWORD]}" @@ -2417,3 +2506,29 @@ if [ Cygwin = "$(uname -o 2>/dev/null)" ]; then complete -o bashdefault -o default -o nospace -F _git git.exe 2>/dev/null \ || complete -o default -o nospace -F _git git.exe fi + +if [[ -n ${ZSH_VERSION-} ]]; then + shopt () { + local option + if [ $# -ne 2 ]; then + echo "USAGE: $0 (-q|-s|-u) <option>" >&2 + return 1 + fi + case "$2" in + nullglob) + option="$2" + ;; + *) + echo "$0: invalid option: $2" >&2 + return 1 + esac + case "$1" in + -q) setopt | grep -q "$option" ;; + -u) unsetopt "$option" ;; + -s) setopt "$option" ;; + *) + echo "$0: invalid flag: $1" >&2 + return 1 + esac + } +fi diff --git a/contrib/emacs/git-blame.el b/contrib/emacs/git-blame.el index 7f4c792978..d351cfb6e7 100644 --- a/contrib/emacs/git-blame.el +++ b/contrib/emacs/git-blame.el @@ -79,6 +79,7 @@ ;;; Code: (eval-when-compile (require 'cl)) ; to use `push', `pop' +(require 'format-spec) (defface git-blame-prefix-face '((((background dark)) (:foreground "gray" diff --git a/contrib/examples/git-svnimport.perl b/contrib/examples/git-svnimport.perl index 6c4cab3633..b09ff8f12f 100755 --- a/contrib/examples/git-svnimport.perl +++ b/contrib/examples/git-svnimport.perl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl # This tool is copyright (c) 2005, Matthias Urlichs. # It is released under the Gnu Public License, version 2. diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4 index c1ea643ace..04ce7e3b02 100755 --- a/contrib/fast-import/git-p4 +++ b/contrib/fast-import/git-p4 @@ -706,7 +706,9 @@ class P4Submit(Command): submitTemplate = self.prepareLogMessage(template, logMessage) if os.environ.has_key("P4DIFF"): del(os.environ["P4DIFF"]) - diff = p4_read_pipe("diff -du ...") + diff = "" + for editedFile in editedFiles: + diff += p4_read_pipe("diff -du %r" % editedFile) newdiff = "" for newFile in filesToAdd: diff --git a/contrib/fast-import/import-directories.perl b/contrib/fast-import/import-directories.perl index 3a5da4ab00..7f3afa5ac4 100755 --- a/contrib/fast-import/import-directories.perl +++ b/contrib/fast-import/import-directories.perl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl # # Copyright 2008-2009 Peter Krefting <peter@softwolves.pp.se> # @@ -140,6 +140,7 @@ by whitespace or other characters. # Globals use strict; +use warnings; use integer; my $crlfmode = 0; my @revs; diff --git a/contrib/hooks/post-receive-email b/contrib/hooks/post-receive-email index 0085086437..85724bfc08 100755 --- a/contrib/hooks/post-receive-email +++ b/contrib/hooks/post-receive-email @@ -71,19 +71,10 @@ # ---------------------------- Functions # -# Top level email generation function. This decides what type of update -# this is and calls the appropriate body-generation routine after outputting -# the common header +# Function to prepare for email generation. This decides what type +# of update this is and whether an email should even be generated. # -# Note this function doesn't actually generate any email output, that is -# taken care of by the functions it calls: -# - generate_email_header -# - generate_create_XXXX_email -# - generate_update_XXXX_email -# - generate_delete_XXXX_email -# - generate_email_footer -# -generate_email() +prep_for_email() { # --- Arguments oldrev=$(git rev-parse $1) @@ -159,7 +150,7 @@ generate_email() # Anything else (is there anything else?) echo >&2 "*** Unknown type of update to $refname ($rev_type)" echo >&2 "*** - no email generated" - exit 1 + return 0 ;; esac @@ -175,9 +166,32 @@ generate_email() esac echo >&2 "*** $config_name is not set so no email will be sent" echo >&2 "*** for $refname update $oldrev->$newrev" - exit 0 + return 0 fi + return 1 +} + +# +# Top level email generation function. This calls the appropriate +# body-generation routine after outputting the common header. +# +# Note this function doesn't actually generate any email output, that is +# taken care of by the functions it calls: +# - generate_email_header +# - generate_create_XXXX_email +# - generate_update_XXXX_email +# - generate_delete_XXXX_email +# - generate_email_footer +# +# Note also that this function cannot 'exit' from the script; when this +# function is running (in hook script mode), the send_mail() function +# is already executing in another process, connected via a pipe, and +# if this function exits without, whatever has been generated to that +# point will be sent as an email... even if nothing has been generated. +# +generate_email() +{ # Email parameters # The email subject will contain the best description of the ref # that we can build from the parameters @@ -717,10 +731,11 @@ if [ -n "$1" -a -n "$2" -a -n "$3" ]; then # Output to the terminal in command line mode - if someone wanted to # resend an email; they could redirect the output to sendmail # themselves - PAGER= generate_email $2 $3 $1 + prep_for_email $2 $3 $1 && PAGER= generate_email else while read oldrev newrev refname do - generate_email $oldrev $newrev $refname $maxlines | send_mail + prep_for_email $oldrev $newrev $refname || continue + generate_email $maxlines | send_mail done fi @@ -3,6 +3,7 @@ #include "exec_cmd.h" #include "run-command.h" #include "strbuf.h" +#include "string-list.h" #include <syslog.h> @@ -20,15 +21,15 @@ static int reuseaddr; static const char daemon_usage[] = "git daemon [--verbose] [--syslog] [--export-all]\n" -" [--timeout=n] [--init-timeout=n] [--max-connections=n]\n" -" [--strict-paths] [--base-path=path] [--base-path-relaxed]\n" -" [--user-path | --user-path=path]\n" -" [--interpolated-path=path]\n" -" [--reuseaddr] [--detach] [--pid-file=file]\n" -" [--[enable|disable|allow-override|forbid-override]=service]\n" -" [--inetd | [--listen=host_or_ipaddr] [--port=n]\n" -" [--user=user [--group=group]]\n" -" [directory...]"; +" [--timeout=<n>] [--init-timeout=<n>] [--max-connections=<n>]\n" +" [--strict-paths] [--base-path=<path>] [--base-path-relaxed]\n" +" [--user-path | --user-path=<path>]\n" +" [--interpolated-path=<path>]\n" +" [--reuseaddr] [--detach] [--pid-file=<file>]\n" +" [--(enable|disable|allow-override|forbid-override)=<service>]\n" +" [--inetd | [--listen=<host_or_ipaddr>] [--port=<n>]\n" +" [--user=<user> [--group=<group>]]\n" +" [<directory>...]"; /* List of acceptable pathname prefixes */ static char **ok_paths; @@ -734,11 +735,17 @@ static int set_reuse_addr(int sockfd) &on, sizeof(on)); } +struct socketlist { + int *list; + size_t nr; + size_t alloc; +}; + #ifndef NO_IPV6 -static int socksetup(char *listen_addr, int listen_port, int **socklist_p) +static int setup_named_sock(char *listen_addr, int listen_port, struct socketlist *socklist) { - int socknum = 0, *socklist = NULL; + int socknum = 0; int maxfd = -1; char pbuf[NI_MAXSERV]; struct addrinfo hints, *ai0, *ai; @@ -753,8 +760,10 @@ static int socksetup(char *listen_addr, int listen_port, int **socklist_p) hints.ai_flags = AI_PASSIVE; gai = getaddrinfo(listen_addr, pbuf, &hints, &ai0); - if (gai) - die("getaddrinfo() failed: %s", gai_strerror(gai)); + if (gai) { + logerror("getaddrinfo() for %s failed: %s", listen_addr, gai_strerror(gai)); + return 0; + } for (ai = ai0; ai; ai = ai->ai_next) { int sockfd; @@ -795,8 +804,9 @@ static int socksetup(char *listen_addr, int listen_port, int **socklist_p) if (flags >= 0) fcntl(sockfd, F_SETFD, flags | FD_CLOEXEC); - socklist = xrealloc(socklist, sizeof(int) * (socknum + 1)); - socklist[socknum++] = sockfd; + ALLOC_GROW(socklist->list, socklist->nr + 1, socklist->alloc); + socklist->list[socklist->nr++] = sockfd; + socknum++; if (maxfd < sockfd) maxfd = sockfd; @@ -804,13 +814,12 @@ static int socksetup(char *listen_addr, int listen_port, int **socklist_p) freeaddrinfo(ai0); - *socklist_p = socklist; return socknum; } #else /* NO_IPV6 */ -static int socksetup(char *listen_addr, int listen_port, int **socklist_p) +static int setup_named_sock(char *listen_addr, int listen_port, struct socketlist *socklist) { struct sockaddr_in sin; int sockfd; @@ -851,22 +860,39 @@ static int socksetup(char *listen_addr, int listen_port, int **socklist_p) if (flags >= 0) fcntl(sockfd, F_SETFD, flags | FD_CLOEXEC); - *socklist_p = xmalloc(sizeof(int)); - **socklist_p = sockfd; + ALLOC_GROW(socklist->list, socklist->nr + 1, socklist->alloc); + socklist->list[socklist->nr++] = sockfd; return 1; } #endif -static int service_loop(int socknum, int *socklist) +static void socksetup(struct string_list *listen_addr, int listen_port, struct socketlist *socklist) +{ + if (!listen_addr->nr) + setup_named_sock(NULL, listen_port, socklist); + else { + int i, socknum; + for (i = 0; i < listen_addr->nr; i++) { + socknum = setup_named_sock(listen_addr->items[i].string, + listen_port, socklist); + + if (socknum == 0) + logerror("unable to allocate any listen sockets for host %s on port %u", + listen_addr->items[i].string, listen_port); + } + } +} + +static int service_loop(struct socketlist *socklist) { struct pollfd *pfd; int i; - pfd = xcalloc(socknum, sizeof(struct pollfd)); + pfd = xcalloc(socklist->nr, sizeof(struct pollfd)); - for (i = 0; i < socknum; i++) { - pfd[i].fd = socklist[i]; + for (i = 0; i < socklist->nr; i++) { + pfd[i].fd = socklist->list[i]; pfd[i].events = POLLIN; } @@ -877,7 +903,7 @@ static int service_loop(int socknum, int *socklist) check_dead_children(); - if (poll(pfd, socknum, -1) < 0) { + if (poll(pfd, socklist->nr, -1) < 0) { if (errno != EINTR) { logerror("Poll failed, resuming: %s", strerror(errno)); @@ -886,7 +912,7 @@ static int service_loop(int socknum, int *socklist) continue; } - for (i = 0; i < socknum; i++) { + for (i = 0; i < socklist->nr; i++) { if (pfd[i].revents & POLLIN) { struct sockaddr_storage ss; unsigned int sslen = sizeof(ss); @@ -946,27 +972,27 @@ static void store_pid(const char *path) die_errno("failed to write pid file '%s'", path); } -static int serve(char *listen_addr, int listen_port, struct passwd *pass, gid_t gid) +static int serve(struct string_list *listen_addr, int listen_port, struct passwd *pass, gid_t gid) { - int socknum, *socklist; + struct socketlist socklist = { NULL, 0, 0 }; - socknum = socksetup(listen_addr, listen_port, &socklist); - if (socknum == 0) - die("unable to allocate any listen sockets on host %s port %u", - listen_addr, listen_port); + socksetup(listen_addr, listen_port, &socklist); + if (socklist.nr == 0) + die("unable to allocate any listen sockets on port %u", + listen_port); if (pass && gid && (initgroups(pass->pw_name, gid) || setgid (gid) || setuid(pass->pw_uid))) die("cannot drop privileges"); - return service_loop(socknum, socklist); + return service_loop(&socklist); } int main(int argc, char **argv) { int listen_port = 0; - char *listen_addr = NULL; + struct string_list listen_addr = STRING_LIST_INIT_NODUP; int inetd_mode = 0; const char *pid_file = NULL, *user_name = NULL, *group_name = NULL; int detach = 0; @@ -981,7 +1007,7 @@ int main(int argc, char **argv) char *arg = argv[i]; if (!prefixcmp(arg, "--listen=")) { - listen_addr = xstrdup_tolower(arg + 9); + string_list_append(&listen_addr, xstrdup_tolower(arg + 9)); continue; } if (!prefixcmp(arg, "--port=")) { @@ -1106,7 +1132,7 @@ int main(int argc, char **argv) if (inetd_mode && (group_name || user_name)) die("--user and --group are incompatible with --inetd"); - if (inetd_mode && (listen_port || listen_addr)) + if (inetd_mode && (listen_port || (listen_addr.nr > 0))) die("--listen= and --port= are incompatible with --inetd"); else if (listen_port == 0) listen_port = DEFAULT_GIT_PORT; @@ -1161,5 +1187,5 @@ int main(int argc, char **argv) if (pid_file) store_pid(pid_file); - return serve(listen_addr, listen_port, pass, gid); + return serve(&listen_addr, listen_port, pass, gid); } @@ -1771,8 +1771,14 @@ static void emit_binary_diff(FILE *file, mmfile_t *one, mmfile_t *two, char *pre static void diff_filespec_load_driver(struct diff_filespec *one) { - if (!one->driver) + /* Use already-loaded driver */ + if (one->driver) + return; + + if (S_ISREG(one->mode)) one->driver = userdiff_find_by_path(one->path); + + /* Fallback to default settings */ if (!one->driver) one->driver = userdiff_find_by_name("default"); } @@ -1820,8 +1826,7 @@ struct userdiff_driver *get_textconv(struct diff_filespec *one) { if (!DIFF_FILE_VALID(one)) return NULL; - if (!S_ISREG(one->mode)) - return NULL; + diff_filespec_load_driver(one); if (!one->driver->textconv) return NULL; @@ -3140,16 +3145,19 @@ int diff_opt_parse(struct diff_options *options, const char **av, int ac) return stat_opt(options, av); /* renames options */ - else if (!prefixcmp(arg, "-B")) { + else if (!prefixcmp(arg, "-B") || !prefixcmp(arg, "--break-rewrites=") || + !strcmp(arg, "--break-rewrites")) { if ((options->break_opt = diff_scoreopt_parse(arg)) == -1) return -1; } - else if (!prefixcmp(arg, "-M")) { + else if (!prefixcmp(arg, "-M") || !prefixcmp(arg, "--detect-renames=") || + !strcmp(arg, "--detect-renames")) { if ((options->rename_score = diff_scoreopt_parse(arg)) == -1) return -1; options->detect_rename = DIFF_DETECT_RENAME; } - else if (!prefixcmp(arg, "-C")) { + else if (!prefixcmp(arg, "-C") || !prefixcmp(arg, "--detect-copies=") || + !strcmp(arg, "--detect-copies")) { if (options->detect_rename == DIFF_DETECT_COPY) DIFF_OPT_SET(options, FIND_COPIES_HARDER); if ((options->rename_score = diff_scoreopt_parse(arg)) == -1) @@ -3323,7 +3331,7 @@ int diff_opt_parse(struct diff_options *options, const char **av, int ac) return 1; } -static int parse_num(const char **cp_p) +int parse_rename_score(const char **cp_p) { unsigned long num, scale; int ch, dot; @@ -3366,10 +3374,26 @@ static int diff_scoreopt_parse(const char *opt) if (*opt++ != '-') return -1; cmd = *opt++; + if (cmd == '-') { + /* convert the long-form arguments into short-form versions */ + if (!prefixcmp(opt, "break-rewrites")) { + opt += strlen("break-rewrites"); + if (*opt == 0 || *opt++ == '=') + cmd = 'B'; + } else if (!prefixcmp(opt, "detect-copies")) { + opt += strlen("detect-copies"); + if (*opt == 0 || *opt++ == '=') + cmd = 'C'; + } else if (!prefixcmp(opt, "detect-renames")) { + opt += strlen("detect-renames"); + if (*opt == 0 || *opt++ == '=') + cmd = 'M'; + } + } if (cmd != 'M' && cmd != 'C' && cmd != 'B') return -1; /* that is not a -M, -C nor -B option */ - opt1 = parse_num(&opt); + opt1 = parse_rename_score(&opt); if (cmd != 'B') opt2 = 0; else { @@ -3379,7 +3403,7 @@ static int diff_scoreopt_parse(const char *opt) return -1; /* we expect -B80/99 or -B80 */ else { opt++; - opt2 = parse_num(&opt); + opt2 = parse_rename_score(&opt); } } if (*opt != 0) @@ -3532,7 +3556,7 @@ static void diff_flush_stat(struct diff_filepair *p, struct diff_options *o, if ((DIFF_FILE_VALID(p->one) && S_ISDIR(p->one->mode)) || (DIFF_FILE_VALID(p->two) && S_ISDIR(p->two->mode))) - return; /* no tree diffs in patch format */ + return; /* no useful stat for tree diffs */ run_diffstat(p, o, diffstat); } @@ -3545,7 +3569,7 @@ static void diff_flush_checkdiff(struct diff_filepair *p, if ((DIFF_FILE_VALID(p->one) && S_ISDIR(p->one->mode)) || (DIFF_FILE_VALID(p->two) && S_ISDIR(p->two->mode))) - return; /* no tree diffs in patch format */ + return; /* nothing to check in tree diffs */ run_checkdiff(p, o); } @@ -3870,7 +3894,7 @@ static int diff_get_patch_id(struct diff_options *options, unsigned char *sha1) xpp.flags = 0; xecfg.ctxlen = 3; - xecfg.flags = XDL_EMIT_FUNCNAMES; + xecfg.flags = 0; xdi_diff_outf(&mf1, &mf2, patch_id_consume, &data, &xpp, &xecfg); } @@ -315,4 +315,6 @@ extern size_t fill_textconv(struct userdiff_driver *driver, extern struct userdiff_driver *get_textconv(struct diff_filespec *one); +extern int parse_rename_score(const char **cp_p); + #endif /* DIFF_H */ @@ -360,7 +360,8 @@ int excluded_from_list(const char *pathname, if (x->flags & EXC_FLAG_MUSTBEDIR) { if (!dtype) { - if (!prefixcmp(pathname, exclude)) + if (!prefixcmp(pathname, exclude) && + pathname[x->patternlen] == '/') return to_exclude; else continue; diff --git a/fast-import.c b/fast-import.c index 8f68a89234..77549ebd6f 100644 --- a/fast-import.c +++ b/fast-import.c @@ -2893,7 +2893,7 @@ static int git_pack_config(const char *k, const char *v, void *cb) } static const char fast_import_usage[] = -"git fast-import [--date-format=f] [--max-pack-size=n] [--big-file-threshold=n] [--depth=n] [--active-branches=n] [--export-marks=marks.file]"; +"git fast-import [--date-format=<f>] [--max-pack-size=<n>] [--big-file-threshold=<n>] [--depth=<n>] [--active-branches=<n>] [--export-marks=<marks.file>]"; static void parse_argv(void) { diff --git a/git-add--interactive.perl b/git-add--interactive.perl index 27fc79347a..77f60fa396 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -1,6 +1,8 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl +use 5.008; use strict; +use warnings; use Git; binmode(STDOUT, ":raw"); @@ -5,7 +5,7 @@ SUBDIRECTORY_OK=Yes OPTIONS_KEEPDASHDASH= OPTIONS_SPEC="\ -git am [options] [<mbox>|<Maildir>...] +git am [options] [(<mbox>|<Maildir>)...] git am [options] (--resolved | --skip | --abort) -- i,interactive run interactively diff --git a/git-archimport.perl b/git-archimport.perl index 98f3ede566..bc32f18d6d 100755 --- a/git-archimport.perl +++ b/git-archimport.perl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl # # This tool is copyright (c) 2005, Martin Langhoff. # It is released under the Gnu Public License, version 2. @@ -54,6 +54,7 @@ and can contain multiple, unrelated branches. =cut +use 5.008; use strict; use warnings; use Getopt::Std; diff --git a/git-bisect.sh b/git-bisect.sh index 6e2acb8ef2..c21e33c8d1 100755 --- a/git-bisect.sh +++ b/git-bisect.sh @@ -316,7 +316,12 @@ bisect_reset() { *) usage ;; esac - git checkout "$branch" -- && bisect_clean_state + if git checkout "$branch" -- ; then + bisect_clean_state + else + die "Could not check out original HEAD '$branch'." \ + "Try 'git bisect reset <commit>'." + fi } bisect_clean_state() { @@ -338,6 +343,7 @@ bisect_clean_state() { } bisect_replay () { + test "$#" -eq 1 || die "No logfile given" test -r "$1" || die "cannot read $1 for replaying" bisect_reset while read git bisect command rev @@ -412,6 +418,10 @@ bisect_run () { done } +bisect_log () { + test -s "$GIT_DIR/BISECT_LOG" || die "We are not bisecting." + cat "$GIT_DIR/BISECT_LOG" +} case "$#" in 0) @@ -438,7 +448,7 @@ case "$#" in replay) bisect_replay "$@" ;; log) - cat "$GIT_DIR/BISECT_LOG" ;; + bisect_log ;; run) bisect_run "$@" ;; *) diff --git a/git-cvsexportcommit.perl b/git-cvsexportcommit.perl index 59b672213b..39a426e067 100755 --- a/git-cvsexportcommit.perl +++ b/git-cvsexportcommit.perl @@ -1,6 +1,8 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl +use 5.008; use strict; +use warnings; use Getopt::Std; use File::Temp qw(tempdir); use Data::Dumper; diff --git a/git-cvsimport.perl b/git-cvsimport.perl index 7ab7bbc9ea..d27abfe7f3 100755 --- a/git-cvsimport.perl +++ b/git-cvsimport.perl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl # This tool is copyright (c) 2005, Matthias Urlichs. # It is released under the Gnu Public License, version 2. @@ -13,6 +13,7 @@ # The head revision is on branch "origin" by default. # You can change that with the '-o' option. +use 5.008; use strict; use warnings; use Getopt::Long; diff --git a/git-cvsserver.perl b/git-cvsserver.perl index bd19b85533..1b8bff2cac 100755 --- a/git-cvsserver.perl +++ b/git-cvsserver.perl @@ -15,6 +15,7 @@ #### #### +use 5.008; use strict; use warnings; use bytes; diff --git a/git-difftool.perl b/git-difftool.perl index adc42de875..e95e4ad973 100755 --- a/git-difftool.perl +++ b/git-difftool.perl @@ -10,6 +10,7 @@ # # Any arguments that are unknown to this script are forwarded to 'git diff'. +use 5.008; use strict; use warnings; use Cwd qw(abs_path); diff --git a/git-gui/git-gui.sh b/git-gui/git-gui.sh index 4617f29c26..d3acf0d213 100755 --- a/git-gui/git-gui.sh +++ b/git-gui/git-gui.sh @@ -83,6 +83,7 @@ if {![catch {set _verbose $env(GITGUI_VERBOSE)}]} { puts stderr "source $name" uplevel 1 real__source $name } + if {[tk windowingsystem] eq "win32"} { console show } } ###################################################################### @@ -444,6 +445,8 @@ proc _lappend_nice {cmd_var} { set _nice [_which nice] if {[catch {exec $_nice git version}]} { set _nice {} + } elseif {[is_Windows] && [file dirname $_nice] ne [file dirname $::_git]} { + set _nice {} } } if {$_nice ne {}} { @@ -673,6 +676,7 @@ bind . <Visibility> { if {[is_Windows]} { wm iconbitmap . -default $oguilib/git-gui.ico set ::tk::AlwaysShowSelection 1 + bind . <Control-F2> {console show} # Spoof an X11 display for SSH if {![info exists env(DISPLAY)]} { @@ -874,12 +878,19 @@ if {![regsub {^git version } $_git_version {} _git_version]} { exit 1 } +proc get_trimmed_version {s} { + set r {} + foreach x [split $s -._] { + if {[string is integer -strict $x]} { + lappend r $x + } else { + break + } + } + return [join $r .] +} set _real_git_version $_git_version -regsub -- {[\-\.]dirty$} $_git_version {} _git_version -regsub {\.[0-9]+\.g[0-9a-f]+$} $_git_version {} _git_version -regsub {\.[a-zA-Z]+\.?[0-9]+$} $_git_version {} _git_version -regsub {\.GIT$} $_git_version {} _git_version -regsub {\.[a-zA-Z]+\.?[0-9]+$} $_git_version {} _git_version +set _git_version [get_trimmed_version $_git_version] if {![regexp {^[1-9]+(\.[0-9]+)+$} $_git_version]} { catch {wm withdraw .} @@ -1183,13 +1194,22 @@ if {![file isdirectory $_gitdir]} { # _gitdir exists, so try loading the config load_config 0 apply_config -# try to set work tree from environment, falling back to core.worktree -if {[catch { set _gitworktree $env(GIT_WORK_TREE) }]} { - set _gitworktree [get_config core.worktree] - if {$_gitworktree eq ""} { - set _gitworktree [file dirname [file normalize $_gitdir]] + +# v1.7.0 introduced --show-toplevel to return the canonical work-tree +if {[package vsatisfies $_git_version 1.7.0]} { + set _gitworktree [git rev-parse --show-toplevel] +} else { + # try to set work tree from environment, core.worktree or use + # cdup to obtain a relative path to the top of the worktree. If + # run from the top, the ./ prefix ensures normalize expands pwd. + if {[catch { set _gitworktree $env(GIT_WORK_TREE) }]} { + set _gitworktree [get_config core.worktree] + if {$_gitworktree eq ""} { + set _gitworktree [file normalize ./[git rev-parse --show-cdup]] + } } } + if {$_prefix ne {}} { if {$_gitworktree eq {}} { regsub -all {[^/]+/} $_prefix ../ cdup @@ -2861,7 +2881,8 @@ proc usage {} { set s "usage: $::argv0 $::subcommand $::subcommand_args" if {[tk windowingsystem] eq "win32"} { wm withdraw . - tk_messageBox -icon info -title "Usage" -message $s + tk_messageBox -icon info -message $s \ + -title [mc "Usage"] } else { puts stderr $s } @@ -2934,7 +2955,11 @@ blame { if {[catch { set head [git rev-parse --verify $head] } err]} { - puts stderr $err + if {[tk windowingsystem] eq "win32"} { + tk_messageBox -icon error -title [mc Error] -message $err + } else { + puts stderr $err + } exit 1 } } @@ -2973,18 +2998,19 @@ blame { citool - gui { if {[llength $argv] != 0} { - puts -nonewline stderr "usage: $argv0" - if {$subcommand ne {gui} - && [file tail $argv0] ne "git-$subcommand"} { - puts -nonewline stderr " $subcommand" - } - puts stderr {} - exit 1 + usage } # fall through to setup UI for commits } default { - puts stderr "usage: $argv0 \[{blame|browser|citool}\]" + set err "usage: $argv0 \[{blame|browser|citool}\]" + if {[tk windowingsystem] eq "win32"} { + wm withdraw . + tk_messageBox -icon error -message $err \ + -title [mc "Usage"] + } else { + puts stderr $err + } exit 1 } } @@ -3286,6 +3312,7 @@ text $ui_diff -background white -foreground black \ -xscrollcommand {.vpane.lower.diff.body.sbx set} \ -yscrollcommand {.vpane.lower.diff.body.sby set} \ -state disabled +catch {$ui_diff configure -tabstyle wordprocessor} ${NS}::scrollbar .vpane.lower.diff.body.sbx -orient horizontal \ -command [list $ui_diff xview] ${NS}::scrollbar .vpane.lower.diff.body.sby -orient vertical \ @@ -3296,8 +3323,16 @@ pack $ui_diff -side left -fill both -expand 1 pack .vpane.lower.diff.header -side top -fill x pack .vpane.lower.diff.body -side bottom -fill both -expand 1 +foreach {n c} {0 black 1 red4 2 green4 3 yellow4 4 blue4 5 magenta4 6 cyan4 7 grey60} { + $ui_diff tag configure clr4$n -background $c + $ui_diff tag configure clri4$n -foreground $c + $ui_diff tag configure clr3$n -foreground $c + $ui_diff tag configure clri3$n -background $c +} +$ui_diff tag configure clr1 -font font_diffbold + $ui_diff tag conf d_cr -elide true -$ui_diff tag conf d_@ -foreground blue -font font_diffbold +$ui_diff tag conf d_@ -font font_diffbold $ui_diff tag conf d_+ -foreground {#00a000} $ui_diff tag conf d_- -foreground red diff --git a/git-gui/lib/branch_rename.tcl b/git-gui/lib/branch_rename.tcl index 63988773ba..6e510ec2e3 100644 --- a/git-gui/lib/branch_rename.tcl +++ b/git-gui/lib/branch_rename.tcl @@ -53,7 +53,7 @@ constructor dialog {} { return 1 } - grid $w.rename.oldname_l $w.rename.oldname_m -sticky w -padx {0 5} + grid $w.rename.oldname_l $w.rename.oldname_m -sticky we -padx {0 5} grid $w.rename.newname_l $w.rename.newname_t -sticky we -padx {0 5} grid columnconfigure $w.rename 1 -weight 1 pack $w.rename -anchor nw -fill x -pady 5 -padx 5 diff --git a/git-gui/lib/diff.tcl b/git-gui/lib/diff.tcl index c628750276..dcf0711be0 100644 --- a/git-gui/lib/diff.tcl +++ b/git-gui/lib/diff.tcl @@ -294,7 +294,7 @@ proc start_show_diff {cont_info {add_opts {}}} { } lappend cmd -p - lappend cmd --no-color + lappend cmd --color if {$repo_config(gui.diffcontext) >= 1} { lappend cmd "-U$repo_config(gui.diffcontext)" } @@ -332,6 +332,23 @@ proc start_show_diff {cont_info {add_opts {}}} { fileevent $fd readable [list read_diff $fd $cont_info] } +proc parse_color_line {line} { + set start 0 + set result "" + set markup [list] + set regexp {\033\[((?:\d+;)*\d+)?m} + while {[regexp -indices -start $start $regexp $line match code]} { + foreach {begin end} $match break + append result [string range $line $start [expr {$begin - 1}]] + lappend markup [string length $result] \ + [eval [linsert $code 0 string range $line]] + set start [incr end] + } + append result [string range $line $start end] + if {[llength $markup] < 4} {set markup {}} + return [list $result $markup] +} + proc read_diff {fd cont_info} { global ui_diff diff_active is_submodule_diff global is_3way_diff is_conflict_diff current_diff_header @@ -340,6 +357,9 @@ proc read_diff {fd cont_info} { $ui_diff conf -state normal while {[gets $fd line] >= 0} { + foreach {line markup} [parse_color_line $line] break + set line [string map {\033 ^} $line] + # -- Cleanup uninteresting diff header lines. # if {$::current_diff_inheader} { @@ -434,11 +454,23 @@ proc read_diff {fd cont_info} { } } } + set mark [$ui_diff index "end - 1 line linestart"] $ui_diff insert end $line $tags if {[string index $line end] eq "\r"} { $ui_diff tag add d_cr {end - 2c} } $ui_diff insert end "\n" $tags + + foreach {posbegin colbegin posend colend} $markup { + set prefix clr + foreach style [split $colbegin ";"] { + if {$style eq "7"} {append prefix i; continue} + if {$style < 30 || $style > 47} {continue} + set a "$mark linestart + $posbegin chars" + set b "$mark linestart + $posend chars" + catch {$ui_diff tag add $prefix$style $a $b} + } + } } $ui_diff conf -state disabled diff --git a/git-mergetool--lib.sh b/git-mergetool--lib.sh index b5e1943b1d..77d4aee20e 100644 --- a/git-mergetool--lib.sh +++ b/git-mergetool--lib.sh @@ -10,10 +10,10 @@ merge_mode() { translate_merge_tool_path () { case "$1" in - vimdiff) + vimdiff|vimdiff2) echo vim ;; - gvimdiff) + gvimdiff|gvimdiff2) echo gvim ;; emerge) @@ -47,7 +47,8 @@ check_unchanged () { valid_tool () { case "$1" in kdiff3 | tkdiff | xxdiff | meld | opendiff | \ - emerge | vimdiff | gvimdiff | ecmerge | diffuse | araxis | p4merge) + vimdiff | gvimdiff | vimdiff2 | gvimdiff2 | \ + emerge | ecmerge | diffuse | araxis | p4merge) ;; # happy tortoisemerge) if ! merge_mode; then @@ -169,25 +170,30 @@ run_merge_tool () { "$merge_tool_path" "$LOCAL" "$REMOTE" | cat fi ;; - vimdiff) + vimdiff|gvimdiff) if merge_mode; then touch "$BACKUP" - "$merge_tool_path" -d -c "wincmd l" \ - "$LOCAL" "$MERGED" "$REMOTE" + if $base_present; then + "$merge_tool_path" -f -d -c "wincmd J" \ + "$MERGED" "$LOCAL" "$BASE" "$REMOTE" + else + "$merge_tool_path" -f -d -c "wincmd l" \ + "$LOCAL" "$MERGED" "$REMOTE" + fi check_unchanged else - "$merge_tool_path" -d -c "wincmd l" \ + "$merge_tool_path" -f -d -c "wincmd l" \ "$LOCAL" "$REMOTE" fi ;; - gvimdiff) + vimdiff2|gvimdiff2) if merge_mode; then touch "$BACKUP" - "$merge_tool_path" -d -c "wincmd l" -f \ + "$merge_tool_path" -f -d -c "wincmd l" \ "$LOCAL" "$MERGED" "$REMOTE" check_unchanged else - "$merge_tool_path" -d -c "wincmd l" -f \ + "$merge_tool_path" -f -d -c "wincmd l" \ "$LOCAL" "$REMOTE" fi ;; diff --git a/git-rebase.sh b/git-rebase.sh index e5df23bb83..10a238ae3c 100755 --- a/git-rebase.sh +++ b/git-rebase.sh @@ -311,10 +311,6 @@ do esac strategy_opts="$strategy_opts $(git rev-parse --sq-quote "--$newopt")" do_merge=t - if test -n "$strategy" - then - strategy=recursive - fi ;; -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\ --strateg=*|--strategy=*|\ diff --git a/git-relink.perl b/git-relink.perl index 937c69a748..e136732cea 100755 --- a/git-relink.perl +++ b/git-relink.perl @@ -6,7 +6,7 @@ # # Scan two git object-trees, and hardlink any common objects between them. -use 5.006; +use 5.008; use strict; use warnings; use Getopt::Long; @@ -163,7 +163,7 @@ sub link_two_files($$) { sub usage() { - print("Usage: git relink [--safe] <dir> [<dir> ...] <master_dir> \n"); + print("Usage: git relink [--safe] <dir>... <master_dir> \n"); print("All directories should contain a .git/objects/ subdirectory.\n"); print("Options\n"); print("\t--safe\t" . diff --git a/git-repack.sh b/git-repack.sh index 769baaf7e1..624feec26f 100755 --- a/git-repack.sh +++ b/git-repack.sh @@ -52,7 +52,7 @@ true) esac PACKDIR="$GIT_OBJECT_DIRECTORY/pack" -PACKTMP="$GIT_OBJECT_DIRECTORY/.tmp-$$-pack" +PACKTMP="$PACKDIR/.tmp-$$-pack" rm -f "$PACKTMP"-* trap 'rm -f "$PACKTMP"-*' 0 1 2 3 15 @@ -82,6 +82,8 @@ case ",$all_into_one," in ;; esac +mkdir -p "$PACKDIR" || exit + args="$args $local ${GIT_QUIET:+-q} $no_reuse$extra" names=$(git pack-objects --keep-true-parents --honor-pack-keep --non-empty --all --reflog $args </dev/null "$PACKTMP") || exit 1 @@ -90,7 +92,6 @@ if [ -z "$names" ]; then fi # Ok we have prepared all new packfiles. -mkdir -p "$PACKDIR" || exit # First see if there are packs of the same name and if so # if we can move them out of the way (this can happen if we diff --git a/git-send-email.perl b/git-send-email.perl index 8cc4161155..f68ed5a5d3 100755 --- a/git-send-email.perl +++ b/git-send-email.perl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl # # Copyright 2002,2005 Greg Kroah-Hartman <greg@kroah.com> # Copyright 2005 Ryan Anderson <ryan@michonline.com> @@ -16,6 +16,7 @@ # and second line is the subject of the message. # +use 5.008; use strict; use warnings; use Term::ReadLine; @@ -61,6 +62,7 @@ git send-email [options] <file | directory | rev-list options > --envelope-sender <str> * Email envelope sender. --smtp-server <str:int> * Outgoing SMTP server to use. The port is optional. Default 'localhost'. + --smtp-server-option <str> * Outgoing SMTP server option to use. --smtp-server-port <int> * Outgoing SMTP server port. --smtp-user <str> * Username for SMTP-AUTH. --smtp-pass <str> * Password for SMTP-AUTH; not necessary. @@ -71,6 +73,7 @@ git send-email [options] <file | directory | rev-list options > Automating: --identity <str> * Use the sendemail.<id> options. + --to-cmd <str> * Email To: via `<str> \$patch_path` --cc-cmd <str> * Email Cc: via `<str> \$patch_path` --suppress-cc <str> * author, self, sob, cc, cccmd, body, bodycc, all. --[no-]signed-off-by-cc * Send to Signed-off-by: addresses. Default on. @@ -136,11 +139,8 @@ my $have_mail_address = eval { require Mail::Address; 1 }; my $smtp; my $auth; -sub unique_email_list(@); -sub cleanup_compose_files(); - # Variables we fill in automatically, or via prompting: -my (@to,$no_to,@cc,$no_cc,@initial_cc,@bcclist,$no_bcc,@xh, +my (@to,$no_to,@initial_to,@cc,$no_cc,@initial_cc,@bcclist,$no_bcc,@xh, $initial_reply_to,$initial_subject,@files, $author,$sender,$smtp_authpass,$annotate,$compose,$time); @@ -190,9 +190,11 @@ sub do_edit { } # Variables with corresponding config settings -my ($thread, $chain_reply_to, $suppress_from, $signed_off_by_cc, $cc_cmd); -my ($smtp_server, $smtp_server_port, $smtp_authuser, $smtp_encryption); -my ($identity, $aliasfiletype, @alias_files, @smtp_host_parts, $smtp_domain); +my ($thread, $chain_reply_to, $suppress_from, $signed_off_by_cc); +my ($to_cmd, $cc_cmd); +my ($smtp_server, $smtp_server_port, @smtp_server_options); +my ($smtp_authuser, $smtp_encryption); +my ($identity, $aliasfiletype, @alias_files, $smtp_domain); my ($validate, $confirm); my (@suppress_cc); my ($auto_8bit_encoding); @@ -213,10 +215,12 @@ my %config_bool_settings = ( my %config_settings = ( "smtpserver" => \$smtp_server, "smtpserverport" => \$smtp_server_port, + "smtpserveroption" => \@smtp_server_options, "smtpuser" => \$smtp_authuser, "smtppass" => \$smtp_authpass, - "smtpdomain" => \$smtp_domain, - "to" => \@to, + "smtpdomain" => \$smtp_domain, + "to" => \@initial_to, + "tocmd" => \$to_cmd, "cc" => \@initial_cc, "cccmd" => \$cc_cmd, "aliasfiletype" => \$aliasfiletype, @@ -274,7 +278,8 @@ $SIG{INT} = \&signal_handler; my $rc = GetOptions("sender|from=s" => \$sender, "in-reply-to=s" => \$initial_reply_to, "subject=s" => \$initial_subject, - "to=s" => \@to, + "to=s" => \@initial_to, + "to-cmd=s" => \$to_cmd, "no-to" => \$no_to, "cc=s" => \@initial_cc, "no-cc" => \$no_cc, @@ -282,6 +287,7 @@ my $rc = GetOptions("sender|from=s" => \$sender, "no-bcc" => \$no_bcc, "chain-reply-to!" => \$chain_reply_to, "smtp-server=s" => \$smtp_server, + "smtp-server-option=s" => \@smtp_server_options, "smtp-server-port=s" => \$smtp_server_port, "smtp-user=s" => \$smtp_authuser, "smtp-pass:s" => \$smtp_authpass, @@ -368,7 +374,7 @@ my(%suppress_cc); if (@suppress_cc) { foreach my $entry (@suppress_cc) { die "Unknown --suppress-cc field: '$entry'\n" - unless $entry =~ /^(all|cccmd|cc|author|self|sob|body|bodycc)$/; + unless $entry =~ /^(?:all|cccmd|cc|author|self|sob|body|bodycc)$/; $suppress_cc{$entry} = 1; } } @@ -413,7 +419,7 @@ my ($repoauthor, $repocommitter); # Verify the user input -foreach my $entry (@to) { +foreach my $entry (@initial_to) { die "Comma in --to entry: $entry'\n" unless $entry !~ m/,/; } @@ -512,12 +518,12 @@ while (defined(my $f = shift @ARGV)) { push @rev_list_opts, "--", @ARGV; @ARGV = (); } elsif (-d $f and !check_file_rev_conflict($f)) { - opendir(DH,$f) + opendir my $dh, $f or die "Failed to opendir $f: $!"; push @files, grep { -f $_ } map { catfile($f, $_) } - sort readdir(DH); - closedir(DH); + sort readdir $dh; + closedir $dh; } elsif ((-f $f or -p $f) and !check_file_rev_conflict($f)) { push @files, $f; } else { @@ -549,7 +555,7 @@ if (@files) { usage(); } -sub get_patch_subject($) { +sub get_patch_subject { my $fn = shift; open (my $fh, '<', $fn); while (my $line = <$fh>) { @@ -567,7 +573,7 @@ if ($compose) { $compose_filename = ($repo ? tempfile(".gitsendemail.msg.XXXXXX", DIR => $repo->repo_path()) : tempfile(".gitsendemail.msg.XXXXXX", DIR => "."))[1]; - open(C,">",$compose_filename) + open my $c, ">", $compose_filename or die "Failed to open for writing $compose_filename: $!"; @@ -575,7 +581,7 @@ if ($compose) { my $tpl_subject = $initial_subject || ''; my $tpl_reply_to = $initial_reply_to || ''; - print C <<EOT; + print $c <<EOT; From $tpl_sender # This line is ignored. GIT: Lines beginning in "GIT:" will be removed. GIT: Consider including an overall diffstat or table of contents @@ -588,9 +594,9 @@ In-Reply-To: $tpl_reply_to EOT for my $f (@files) { - print C get_patch_subject($f); + print $c get_patch_subject($f); } - close(C); + close $c; if ($annotate) { do_edit($compose_filename, @files); @@ -598,23 +604,23 @@ EOT do_edit($compose_filename); } - open(C2,">",$compose_filename . ".final") + open my $c2, ">", $compose_filename . ".final" or die "Failed to open $compose_filename.final : " . $!; - open(C,"<",$compose_filename) + open $c, "<", $compose_filename or die "Failed to open $compose_filename : " . $!; my $need_8bit_cte = file_has_nonascii($compose_filename); my $in_body = 0; my $summary_empty = 1; - while(<C>) { + while(<$c>) { next if m/^GIT:/; if ($in_body) { $summary_empty = 0 unless (/^\n$/); } elsif (/^\n$/) { $in_body = 1; if ($need_8bit_cte) { - print C2 "MIME-Version: 1.0\n", + print $c2 "MIME-Version: 1.0\n", "Content-Type: text/plain; ", "charset=UTF-8\n", "Content-Transfer-Encoding: 8bit\n"; @@ -639,10 +645,10 @@ EOT print "To/Cc/Bcc fields are not interpreted yet, they have been ignored\n"; next; } - print C2 $_; + print $c2 $_; } - close(C); - close(C2); + close $c; + close $c2; if ($summary_empty) { print "Summary email is empty, skipping it\n"; @@ -679,7 +685,7 @@ sub ask { my %broken_encoding; -sub file_declares_8bit_cte($) { +sub file_declares_8bit_cte { my $fn = shift; open (my $fh, '<', $fn); while (my $line = <$fh>) { @@ -708,7 +714,7 @@ if (!defined $auto_8bit_encoding && scalar %broken_encoding) { if (!$force) { for my $f (@files) { - if (get_patch_subject($f) =~ /\*\*\* SUBJECT HERE \*\*\*/) { + if (get_patch_subject($f) =~ /\Q*** SUBJECT HERE ***\E/) { die "Refusing to send because the patch\n\t$f\n" . "has the template subject '*** SUBJECT HERE ***'. " . "Pass --force if you really want to send.\n"; @@ -725,9 +731,9 @@ if (!defined $sender) { $prompting++; } -if (!@to) { +if (!@initial_to && !defined $to_cmd) { my $to = ask("Who should the emails be sent to? "); - push @to, parse_address_line($to) if defined $to; # sanitized/validated later + push @initial_to, parse_address_line($to) if defined $to; # sanitized/validated later $prompting++; } @@ -745,8 +751,8 @@ sub expand_one_alias { return $aliases{$alias} ? expand_aliases(@{$aliases{$alias}}) : $alias; } -@to = expand_aliases(@to); -@to = (map { sanitize_address($_) } @to); +@initial_to = expand_aliases(@initial_to); +@initial_to = (map { sanitize_address($_) } @initial_to); @initial_cc = expand_aliases(@initial_cc); @bcclist = expand_aliases(@bcclist); @@ -780,8 +786,8 @@ our ($message_id, %mail, $subject, $reply_to, $references, $message, sub extract_valid_address { my $address = shift; - my $local_part_regexp = '[^<>"\s@]+'; - my $domain_regexp = '[^.<>"\s@]+(?:\.[^.<>"\s@]+)+'; + my $local_part_regexp = qr/[^<>"\s@]+/; + my $domain_regexp = qr/[^.<>"\s@]+(?:\.[^.<>"\s@]+)+/; # check for a local address: return $address if ($address =~ /^($local_part_regexp)$/); @@ -822,7 +828,7 @@ sub make_message_id { last if (defined $du_part and $du_part ne ''); } if (not defined $du_part or $du_part eq '') { - use Sys::Hostname qw(); + require Sys::Hostname; $du_part = 'user@' . Sys::Hostname::hostname(); } my $message_id_template = "<%s-git-send-email-%s>"; @@ -855,8 +861,8 @@ sub quote_rfc2047 { sub is_rfc2047_quoted { my $s = shift; - my $token = '[^][()<>@,;:"\/?.= \000-\037\177-\377]+'; - my $encoded_text = '[!->@-~]+'; + my $token = qr/[^][()<>@,;:"\/?.= \000-\037\177-\377]+/; + my $encoded_text = qr/[!->@-~]+/; length($s) <= 75 && $s =~ m/^(?:"[[:ascii:]]*"|=\?$token\?$token\?$encoded_text\?=)$/o; } @@ -867,7 +873,7 @@ sub sanitize_address { my ($recipient_name, $recipient_addr) = ($recipient =~ /^(.*?)\s*(<.*)/); if (not $recipient_name) { - return "$recipient"; + return $recipient; } # if recipient_name is already quoted, do nothing @@ -884,7 +890,7 @@ sub sanitize_address { # double quotes are needed if specials or CTLs are included elsif ($recipient_name =~ /[][()<>@,;:\\".\000-\037\177]/) { $recipient_name =~ s/(["\\\r])/\\$1/g; - $recipient_name = "\"$recipient_name\""; + $recipient_name = qq["$recipient_name"]; } return "$recipient_name $recipient_addr"; @@ -1029,6 +1035,8 @@ X-Mailer: git-send-email $gitversion } } + unshift (@sendmail_parameters, @smtp_server_options); + if ($dry_run) { # We don't want to send the email. } elsif ($smtp_server =~ m#^/#) { @@ -1038,7 +1046,7 @@ X-Mailer: git-send-email $gitversion exec($smtp_server, @sendmail_parameters) or die $!; } print $sm "$header\n$message"; - close $sm or die $?; + close $sm or die $!; } else { if (!defined $smtp_server) { @@ -1144,12 +1152,13 @@ $subject = $initial_subject; $message_num = 0; foreach my $t (@files) { - open(F,"<",$t) or die "can't open file $t"; + open my $fh, "<", $t or die "can't open file $t"; my $author = undef; my $author_encoding; my $has_content_type; my $body_encoding; + @to = (); @cc = (); @xh = (); my $input_format = undef; @@ -1157,7 +1166,7 @@ foreach my $t (@files) { $message = ""; $message_num++; # First unfold multiline header fields - while(<F>) { + while(<$fh>) { last if /^\s*$/; if (/^\s+\S/ and @header) { chomp($header[$#header]); @@ -1190,6 +1199,13 @@ foreach my $t (@files) { $1, $_) unless $quiet; push @cc, $1; } + elsif (/^To:\s+(.*)$/) { + foreach my $addr (parse_address_line($1)) { + printf("(mbox) Adding to: %s from line '%s'\n", + $addr, $_) unless $quiet; + push @to, sanitize_address($addr); + } + } elsif (/^Cc:\s+(.*)$/) { foreach my $addr (parse_address_line($1)) { if (unquote_rfc2047($addr) eq $sender) { @@ -1233,7 +1249,7 @@ foreach my $t (@files) { } } # Now parse the message body - while(<F>) { + while(<$fh>) { $message .= $_; if (/^(Signed-off-by|Cc): (.*)$/i) { chomp; @@ -1250,23 +1266,12 @@ foreach my $t (@files) { $c, $_) unless $quiet; } } - close F; - - if (defined $cc_cmd && !$suppress_cc{'cccmd'}) { - open(F, "$cc_cmd \Q$t\E |") - or die "(cc-cmd) Could not execute '$cc_cmd'"; - while(<F>) { - my $c = $_; - $c =~ s/^\s*//g; - $c =~ s/\n$//g; - next if ($c eq $sender and $suppress_from); - push @cc, $c; - printf("(cc-cmd) Adding cc: %s from: '%s'\n", - $c, $cc_cmd) unless $quiet; - } - close F - or die "(cc-cmd) failed to close pipe to '$cc_cmd'"; - } + close $fh; + + push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t) + if defined $to_cmd; + push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t) + if defined $cc_cmd && !$suppress_cc{'cccmd'}; if ($broken_encoding{$t} && !$has_content_type) { $has_content_type = 1; @@ -1307,6 +1312,7 @@ foreach my $t (@files) { ($confirm =~ /^(?:auto|compose)$/ && $compose && $message_num == 1)); $needs_confirm = "inform" if ($needs_confirm && $confirm_unconfigured && @cc); + @to = (@initial_to, @to); @cc = (@initial_cc, @cc); my $message_was_sent = send_message(); @@ -1324,15 +1330,38 @@ foreach my $t (@files) { $message_id = undef; } +# Execute a command (e.g. $to_cmd) to get a list of email addresses +# and return a results array +sub recipients_cmd { + my ($prefix, $what, $cmd, $file) = @_; + + my $sanitized_sender = sanitize_address($sender); + my @addresses = (); + open my $fh, "$cmd \Q$file\E |" + or die "($prefix) Could not execute '$cmd'"; + while (my $address = <$fh>) { + $address =~ s/^\s*//g; + $address =~ s/\s*$//g; + $address = sanitize_address($address); + next if ($address eq $sanitized_sender and $suppress_from); + push @addresses, $address; + printf("($prefix) Adding %s: %s from: '%s'\n", + $what, $address, $cmd) unless $quiet; + } + close $fh + or die "($prefix) failed to close pipe to '$cmd'"; + return @addresses; +} + cleanup_compose_files(); -sub cleanup_compose_files() { +sub cleanup_compose_files { unlink($compose_filename, $compose_filename . ".final") if $compose; } $smtp->quit if $smtp; -sub unique_email_list(@) { +sub unique_email_list { my %seen; my @emails; diff --git a/git-submodule.sh b/git-submodule.sh index 9ebbab798d..c291eed59c 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -836,11 +836,12 @@ cmd_sync() ;; esac + say "Synchronizing submodule url for '$name'" + git config submodule."$name".url "$url" + if test -e "$path"/.git then ( - say "Synchronizing submodule url for '$name'" - git config submodule."$name".url "$url" clear_local_git_env cd "$path" remote=$(get_default_remote) diff --git a/git-svn.perl b/git-svn.perl index 18cfb2466d..757de82161 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -1,6 +1,7 @@ #!/usr/bin/env perl # Copyright (C) 2006, Eric Wong <normalperson@yhbt.net> # License: GPL v2 or later +use 5.008; use warnings; use strict; use vars qw/ $AUTHOR $VERSION @@ -6,14 +6,14 @@ #include "run-command.h" const char git_usage_string[] = - "git [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path]\n" + "git [--version] [--exec-path[=<path>]] [--html-path]\n" " [-p|--paginate|--no-pager] [--no-replace-objects]\n" - " [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE]\n" + " [--bare] [--git-dir=<path>] [--work-tree=<path>]\n" " [-c name=value] [--help]\n" - " COMMAND [ARGS]"; + " <command> [<args>]"; const char git_more_info_string[] = - "See 'git help COMMAND' for more information on a specific command."; + "See 'git help <command>' for more information on a specific command."; static struct startup_info git_startup_info; static int use_pager = -1; diff --git a/git_remote_helpers/setup.cfg b/git_remote_helpers/setup.cfg new file mode 100644 index 0000000000..4bff8878d1 --- /dev/null +++ b/git_remote_helpers/setup.cfg @@ -0,0 +1,3 @@ +[build] +build_purelib = build/lib +build_platlib = build/lib diff --git a/gitweb/Makefile b/gitweb/Makefile index e32ee76309..0a6ac00631 100644 --- a/gitweb/Makefile +++ b/gitweb/Makefile @@ -40,6 +40,7 @@ HIGHLIGHT_BIN = highlight # include user config -include ../config.mak.autogen -include ../config.mak +-include config.mak # determine version ../GIT-VERSION-FILE: .FORCE-GIT-VERSION-FILE @@ -145,6 +146,15 @@ gitweb.cgi: gitweb.perl GITWEB-BUILD-OPTIONS chmod +x $@+ && \ mv $@+ $@ +### Testing rules + +test: + $(MAKE) -C ../t gitweb-test + +test-installed: + GITWEB_TEST_INSTALLED='$(DESTDIR_SQ)$(gitwebdir_SQ)' \ + $(MAKE) -C ../t gitweb-test + ### Installation rules install: all @@ -158,5 +168,5 @@ install: all clean: $(RM) gitweb.cgi static/gitweb.min.js static/gitweb.min.css GITWEB-BUILD-OPTIONS -.PHONY: all clean install .FORCE-GIT-VERSION-FILE FORCE +.PHONY: all clean install test test-installed .FORCE-GIT-VERSION-FILE FORCE diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 8d7e4c5e49..679f2da3ee 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -7,6 +7,7 @@ # # This program is licensed under the GPLv2 +use 5.008; use strict; use warnings; use CGI qw(:standard :escapeHTML -nosticky); @@ -1074,6 +1075,7 @@ sub run_request { evaluate_uri(); evaluate_gitweb_config(); + evaluate_git_version(); check_loadavg(); # $projectroot and $projects_list might be set in gitweb config file @@ -1126,7 +1128,6 @@ sub evaluate_argv { sub run { evaluate_argv(); - evaluate_git_version(); $pre_listen_hook->() if $pre_listen_hook; diff --git a/ll-merge.c b/ll-merge.c index 6bb3095c3a..007dd3e4d3 100644 --- a/ll-merge.c +++ b/ll-merge.c @@ -18,7 +18,7 @@ typedef int (*ll_merge_fn)(const struct ll_merge_driver *, mmfile_t *orig, const char *orig_name, mmfile_t *src1, const char *name1, mmfile_t *src2, const char *name2, - int flag, + const struct ll_merge_options *opts, int marker_size); struct ll_merge_driver { @@ -39,14 +39,18 @@ static int ll_binary_merge(const struct ll_merge_driver *drv_unused, mmfile_t *orig, const char *orig_name, mmfile_t *src1, const char *name1, mmfile_t *src2, const char *name2, - int flag, int marker_size) + const struct ll_merge_options *opts, + int marker_size) { + mmfile_t *stolen; + assert(opts); + /* * The tentative merge result is "ours" for the final round, * or common ancestor for an internal merge. Still return * "conflicted merge" status. */ - mmfile_t *stolen = (flag & LL_OPT_VIRTUAL_ANCESTOR) ? orig : src1; + stolen = opts->virtual_ancestor ? orig : src1; result->ptr = stolen->ptr; result->size = stolen->size; @@ -60,9 +64,11 @@ static int ll_xdl_merge(const struct ll_merge_driver *drv_unused, mmfile_t *orig, const char *orig_name, mmfile_t *src1, const char *name1, mmfile_t *src2, const char *name2, - int flag, int marker_size) + const struct ll_merge_options *opts, + int marker_size) { xmparam_t xmp; + assert(opts); if (buffer_is_binary(orig->ptr, orig->size) || buffer_is_binary(src1->ptr, src1->size) || @@ -74,12 +80,13 @@ static int ll_xdl_merge(const struct ll_merge_driver *drv_unused, orig, orig_name, src1, name1, src2, name2, - flag, marker_size); + opts, marker_size); } memset(&xmp, 0, sizeof(xmp)); xmp.level = XDL_MERGE_ZEALOUS; - xmp.favor = ll_opt_favor(flag); + xmp.favor = opts->variant; + xmp.xpp.flags = opts->xdl_opts; if (git_xmerge_style >= 0) xmp.style = git_xmerge_style; if (marker_size > 0) @@ -96,15 +103,17 @@ static int ll_union_merge(const struct ll_merge_driver *drv_unused, mmfile_t *orig, const char *orig_name, mmfile_t *src1, const char *name1, mmfile_t *src2, const char *name2, - int flag, int marker_size) + const struct ll_merge_options *opts, + int marker_size) { /* Use union favor */ - flag &= ~LL_OPT_FAVOR_MASK; - flag |= create_ll_flag(XDL_MERGE_FAVOR_UNION); + struct ll_merge_options o; + assert(opts); + o = *opts; + o.variant = XDL_MERGE_FAVOR_UNION; return ll_xdl_merge(drv_unused, result, path_unused, orig, NULL, src1, NULL, src2, NULL, - flag, marker_size); - return 0; + &o, marker_size); } #define LL_BINARY_MERGE 0 @@ -136,7 +145,8 @@ static int ll_ext_merge(const struct ll_merge_driver *fn, mmfile_t *orig, const char *orig_name, mmfile_t *src1, const char *name1, mmfile_t *src2, const char *name2, - int flag, int marker_size) + const struct ll_merge_options *opts, + int marker_size) { char temp[4][50]; struct strbuf cmd = STRBUF_INIT; @@ -144,6 +154,7 @@ static int ll_ext_merge(const struct ll_merge_driver *fn, const char *args[] = { NULL, NULL }; int status, fd, i; struct stat st; + assert(opts); dict[0].placeholder = "O"; dict[0].value = temp[0]; dict[1].placeholder = "A"; dict[1].value = temp[1]; @@ -337,15 +348,21 @@ int ll_merge(mmbuffer_t *result_buf, mmfile_t *ancestor, const char *ancestor_label, mmfile_t *ours, const char *our_label, mmfile_t *theirs, const char *their_label, - int flag) + const struct ll_merge_options *opts) { static struct git_attr_check check[2]; const char *ll_driver_name = NULL; int marker_size = DEFAULT_CONFLICT_MARKER_SIZE; const struct ll_merge_driver *driver; - int virtual_ancestor = flag & LL_OPT_VIRTUAL_ANCESTOR; - if (flag & LL_OPT_RENORMALIZE) { + if (!opts) { + struct ll_merge_options default_opts = {0}; + return ll_merge(result_buf, path, ancestor, ancestor_label, + ours, our_label, theirs, their_label, + &default_opts); + } + + if (opts->renormalize) { normalize_file(ancestor, path); normalize_file(ours, path); normalize_file(theirs, path); @@ -359,11 +376,11 @@ int ll_merge(mmbuffer_t *result_buf, } } driver = find_ll_merge_driver(ll_driver_name); - if (virtual_ancestor && driver->recursive) + if (opts->virtual_ancestor && driver->recursive) driver = find_ll_merge_driver(driver->recursive); return driver->fn(driver, result_buf, path, ancestor, ancestor_label, ours, our_label, theirs, their_label, - flag, marker_size); + opts, marker_size); } int ll_merge_marker_size(const char *path) diff --git a/ll-merge.h b/ll-merge.h index ff7ca87bfa..244a31f55a 100644 --- a/ll-merge.h +++ b/ll-merge.h @@ -5,27 +5,19 @@ #ifndef LL_MERGE_H #define LL_MERGE_H -#define LL_OPT_VIRTUAL_ANCESTOR (1 << 0) -#define LL_OPT_FAVOR_MASK ((1 << 1) | (1 << 2)) -#define LL_OPT_FAVOR_SHIFT 1 -#define LL_OPT_RENORMALIZE (1 << 3) - -static inline int ll_opt_favor(int flag) -{ - return (flag & LL_OPT_FAVOR_MASK) >> LL_OPT_FAVOR_SHIFT; -} - -static inline int create_ll_flag(int favor) -{ - return ((favor << LL_OPT_FAVOR_SHIFT) & LL_OPT_FAVOR_MASK); -} +struct ll_merge_options { + unsigned virtual_ancestor : 1; + unsigned variant : 2; /* favor ours, favor theirs, or union merge */ + unsigned renormalize : 1; + long xdl_opts; +}; int ll_merge(mmbuffer_t *result_buf, const char *path, mmfile_t *ancestor, const char *ancestor_label, mmfile_t *ours, const char *our_label, mmfile_t *theirs, const char *their_label, - int flag); + const struct ll_merge_options *opts); int ll_merge_marker_size(const char *path); @@ -79,12 +79,14 @@ static void add_mapping(struct string_list *map, if (old_name == NULL) { debug_mm("mailmap: adding (simple) entry for %s at index %d\n", old_email, index); /* Replace current name and new email for simple entry */ - free(me->name); - free(me->email); - if (new_name) + if (new_name) { + free(me->name); me->name = xstrdup(new_name); - if (new_email) + } + if (new_email) { + free(me->email); me->email = xstrdup(new_email); + } } else { struct mailmap_info *mi = xmalloc(sizeof(struct mailmap_info)); debug_mm("mailmap: adding (complex) entry for %s at index %d\n", old_email, index); diff --git a/merge-file.c b/merge-file.c index db4d0d50d3..f7f4533926 100644 --- a/merge-file.c +++ b/merge-file.c @@ -37,7 +37,7 @@ static void *three_way_filemerge(const char *path, mmfile_t *base, mmfile_t *our * common ancestor. */ merge_status = ll_merge(&res, path, base, NULL, - our, ".our", their, ".their", 0); + our, ".our", their, ".their", NULL); if (merge_status < 0) return NULL; diff --git a/merge-recursive.c b/merge-recursive.c index c574698819..875859f68e 100644 --- a/merge-recursive.c +++ b/merge-recursive.c @@ -334,6 +334,7 @@ static struct string_list *get_renames(struct merge_options *o, opts.rename_limit = o->merge_rename_limit >= 0 ? o->merge_rename_limit : o->diff_rename_limit >= 0 ? o->diff_rename_limit : 500; + opts.rename_score = o->rename_score; opts.warn_on_too_large_rename = 1; opts.output_format = DIFF_FORMAT_NO_OUTPUT; if (diff_setup_done(&opts) < 0) @@ -605,22 +606,26 @@ static int merge_3way(struct merge_options *o, const char *branch2) { mmfile_t orig, src1, src2; + struct ll_merge_options ll_opts = {0}; char *base_name, *name1, *name2; int merge_status; - int favor; - if (o->call_depth) - favor = 0; - else { + ll_opts.renormalize = o->renormalize; + ll_opts.xdl_opts = o->xdl_opts; + + if (o->call_depth) { + ll_opts.virtual_ancestor = 1; + ll_opts.variant = 0; + } else { switch (o->recursive_variant) { case MERGE_RECURSIVE_OURS: - favor = XDL_MERGE_FAVOR_OURS; + ll_opts.variant = XDL_MERGE_FAVOR_OURS; break; case MERGE_RECURSIVE_THEIRS: - favor = XDL_MERGE_FAVOR_THEIRS; + ll_opts.variant = XDL_MERGE_FAVOR_THEIRS; break; default: - favor = 0; + ll_opts.variant = 0; break; } } @@ -643,10 +648,7 @@ static int merge_3way(struct merge_options *o, read_mmblob(&src2, b->sha1); merge_status = ll_merge(result_buf, a->path, &orig, base_name, - &src1, name1, &src2, name2, - ((o->call_depth ? LL_OPT_VIRTUAL_ANCESTOR : 0) | - (o->renormalize ? LL_OPT_RENORMALIZE : 0) | - create_ll_flag(favor))); + &src1, name1, &src2, name2, &ll_opts); free(name1); free(name2); @@ -1550,3 +1552,37 @@ void init_merge_options(struct merge_options *o) memset(&o->current_directory_set, 0, sizeof(struct string_list)); o->current_directory_set.strdup_strings = 1; } + +int parse_merge_opt(struct merge_options *o, const char *s) +{ + if (!s || !*s) + return -1; + if (!strcmp(s, "ours")) + o->recursive_variant = MERGE_RECURSIVE_OURS; + else if (!strcmp(s, "theirs")) + o->recursive_variant = MERGE_RECURSIVE_THEIRS; + else if (!strcmp(s, "subtree")) + o->subtree_shift = ""; + else if (!prefixcmp(s, "subtree=")) + o->subtree_shift = s + strlen("subtree="); + else if (!strcmp(s, "patience")) + o->xdl_opts |= XDF_PATIENCE_DIFF; + else if (!strcmp(s, "ignore-space-change")) + o->xdl_opts |= XDF_IGNORE_WHITESPACE_CHANGE; + else if (!strcmp(s, "ignore-all-space")) + o->xdl_opts |= XDF_IGNORE_WHITESPACE; + else if (!strcmp(s, "ignore-space-at-eol")) + o->xdl_opts |= XDF_IGNORE_WHITESPACE_AT_EOL; + else if (!strcmp(s, "renormalize")) + o->renormalize = 1; + else if (!strcmp(s, "no-renormalize")) + o->renormalize = 0; + else if (!prefixcmp(s, "rename-threshold=")) { + const char *score = s + strlen("rename-threshold="); + if ((o->rename_score = parse_rename_score(&score)) == -1 || *score != 0) + return -1; + } + else + return -1; + return 0; +} diff --git a/merge-recursive.h b/merge-recursive.h index 34492dbd6e..c8135b0ec7 100644 --- a/merge-recursive.h +++ b/merge-recursive.h @@ -15,9 +15,11 @@ struct merge_options { const char *subtree_shift; unsigned buffer_output : 1; unsigned renormalize : 1; + long xdl_opts; int verbosity; int diff_rename_limit; int merge_rename_limit; + int rename_score; int call_depth; struct strbuf obuf; struct string_list current_file_set; @@ -52,6 +54,8 @@ int merge_recursive_generic(struct merge_options *o, void init_merge_options(struct merge_options *o); struct tree *write_tree_from_memory(struct merge_options *o); +int parse_merge_opt(struct merge_options *out, const char *s); + /* builtin/merge.c */ int try_merge_command(const char *strategy, struct commit_list *common, const char *head_arg, struct commit_list *remotes); diff --git a/perl/Git.pm b/perl/Git.pm index 6cb0dd1934..205e48aa3a 100644 --- a/perl/Git.pm +++ b/perl/Git.pm @@ -7,6 +7,7 @@ Git - Perl interface to the Git version control system package Git; +use 5.008; use strict; @@ -325,7 +325,7 @@ static int handle_cache(const char *path, unsigned char *sha1, const char *outpu */ ll_merge(&result, path, &mmfile[0], NULL, &mmfile[1], "ours", - &mmfile[2], "theirs", 0); + &mmfile[2], "theirs", NULL); for (i = 0; i < 3; i++) free(mmfile[i].ptr); diff --git a/send-pack.h b/send-pack.h index 60b4ba66eb..05d7ab118b 100644 --- a/send-pack.h +++ b/send-pack.h @@ -5,6 +5,7 @@ struct send_pack_args { unsigned verbose:1, quiet:1, porcelain:1, + progress:1, send_mirror:1, force_update:1, use_thin_pack:1, @@ -46,7 +46,7 @@ const char *prefix_filename(const char *pfx, int pfx_len, const char *arg) { static char path[PATH_MAX]; #ifndef WIN32 - if (!pfx || !*pfx || is_absolute_path(arg)) + if (!pfx_len || is_absolute_path(arg)) return arg; memcpy(path, pfx, pfx_len); strcpy(path + pfx_len, arg); @@ -55,7 +55,7 @@ const char *prefix_filename(const char *pfx, int pfx_len, const char *arg) /* don't add prefix to absolute paths, but still replace '\' by '/' */ if (is_absolute_path(arg)) pfx_len = 0; - else + else if (pfx_len) memcpy(path, pfx, pfx_len); strcpy(path + pfx_len, arg); for (p = path + pfx_len; *p; p++) diff --git a/sha1_name.c b/sha1_name.c index 484081de82..3e856b8036 100644 --- a/sha1_name.c +++ b/sha1_name.c @@ -1069,6 +1069,7 @@ int get_sha1_with_context_1(const char *name, unsigned char *sha1, struct cache_entry *ce; int pos; if (namelen > 2 && name[1] == '/') + /* don't need mode for commit */ return get_sha1_oneline(name + 2, sha1); if (namelen < 3 || name[2] != ':' || @@ -1096,6 +1097,7 @@ int get_sha1_with_context_1(const char *name, unsigned char *sha1, break; if (ce_stage(ce) == stage) { hashcpy(sha1, ce->sha1); + oc->mode = ce->ce_mode; return 0; } pos++; diff --git a/t/Makefile b/t/Makefile index c7baefb7ea..73c6ec473d 100644 --- a/t/Makefile +++ b/t/Makefile @@ -11,16 +11,25 @@ SHELL_PATH ?= $(SHELL) PERL_PATH ?= /usr/bin/perl TAR ?= $(TAR) RM ?= rm -f +PROVE ?= prove +DEFAULT_TEST_TARGET ?= test # Shell quote; SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) T = $(wildcard t[0-9][0-9][0-9][0-9]-*.sh) TSVN = $(wildcard t91[0-9][0-9]-*.sh) +TGITWEB = $(wildcard t95[0-9][0-9]-*.sh) -all: pre-clean +all: $(DEFAULT_TEST_TARGET) + +test: pre-clean $(MAKE) aggregate-results-and-cleanup +prove: pre-clean + @echo "*** prove ***"; GIT_CONFIG=.git/config $(PROVE) --exec '$(SHELL_PATH_SQ)' $(GIT_PROVE_OPTS) $(T) :: $(GIT_TEST_OPTS) + $(MAKE) clean + $(T): @echo "*** $@ ***"; GIT_CONFIG=.git/config '$(SHELL_PATH_SQ)' $@ $(GIT_TEST_OPTS) @@ -46,6 +55,9 @@ full-svn-test: $(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=1 LC_ALL=C $(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=0 LC_ALL=en_US.UTF-8 +gitweb-test: + $(MAKE) $(TGITWEB) + valgrind: GIT_TEST_OPTS=--valgrind $(MAKE) @@ -50,6 +50,12 @@ prove and other harnesses come with a lot of useful options. The # Repeat until no more failures $ prove -j 15 --state=failed,save ./t[0-9]*.sh +You can give DEFAULT_TEST_TARGET=prove on the make command (or define it +in config.mak) to cause "make test" to run tests under prove. +GIT_PROVE_OPTS can be used to pass additional options, e.g. + + $ make DEFAULT_TEST_TARGET=prove GIT_PROVE_OPTS='--timer --jobs 16' test + You can also run each test individually from command line, like this: $ sh ./t3010-ls-files-killed-modified.sh diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh index 8c490c8707..b9bb95feaa 100644 --- a/t/gitweb-lib.sh +++ b/t/gitweb-lib.sh @@ -32,17 +32,34 @@ EOF cat >.git/description <<EOF $0 test repository EOF + + # You can set the GITWEB_TEST_INSTALLED environment variable to + # the gitwebdir (the directory where gitweb is installed / deployed to) + # of an existing gitweb instalation to test that installation, + # or simply to pathname of installed gitweb script. + if test -n "$GITWEB_TEST_INSTALLED" ; then + if test -d $GITWEB_TEST_INSTALLED; then + SCRIPT_NAME="$GITWEB_TEST_INSTALLED/gitweb.cgi" + else + SCRIPT_NAME="$GITWEB_TEST_INSTALLED" + fi + test -f "$SCRIPT_NAME" || + error "Cannot find gitweb at $GITWEB_TEST_INSTALLED." + say "# Testing $SCRIPT_NAME" + else # normal case, use source version of gitweb + SCRIPT_NAME="$GIT_BUILD_DIR/gitweb/gitweb.perl" + fi + export SCRIPT_NAME } gitweb_run () { GATEWAY_INTERFACE='CGI/1.1' HTTP_ACCEPT='*/*' REQUEST_METHOD='GET' - SCRIPT_NAME="$GIT_BUILD_DIR/gitweb/gitweb.perl" QUERY_STRING=""$1"" PATH_INFO=""$2"" export GATEWAY_INTERFACE HTTP_ACCEPT REQUEST_METHOD \ - SCRIPT_NAME QUERY_STRING PATH_INFO + QUERY_STRING PATH_INFO GITWEB_CONFIG=$(pwd)/gitweb_config.perl export GITWEB_CONFIG @@ -80,7 +97,7 @@ if ! test_have_prereq PERL; then test_done fi -perl -MEncode -e 'decode_utf8("", Encode::FB_CROAK)' >/dev/null 2>&1 || { +perl -MEncode -e '$e="";decode_utf8($e, Encode::FB_CROAK)' >/dev/null 2>&1 || { skip_all='skipping gitweb tests, perl version is too old' test_done } diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh new file mode 100644 index 0000000000..c383b57ed9 --- /dev/null +++ b/t/lib-terminal.sh @@ -0,0 +1,19 @@ +#!/bin/sh + +test_expect_success 'set up terminal for tests' ' + if + test_have_prereq PERL && + "$PERL_PATH" "$TEST_DIRECTORY"/test-terminal.perl \ + sh -c "test -t 1 && test -t 2" + then + test_set_prereq TTY && + test_terminal () { + if ! test_declared_prereq TTY + then + echo >&4 "test_terminal: need to declare TTY prerequisite" + return 127 + fi + "$PERL_PATH" "$TEST_DIRECTORY"/test-terminal.perl "$@" + } + fi +' diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh index 25205ac0ee..e75153bdea 100755 --- a/t/t0003-attributes.sh +++ b/t/t0003-attributes.sh @@ -38,7 +38,7 @@ test_expect_success 'setup' ' ) >a/b/.gitattributes ( echo "global test=global" - ) >$HOME/global-gitattributes + ) >"$HOME"/global-gitattributes ' diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh index 9a07de1a5b..8008fa2d89 100755 --- a/t/t1011-read-tree-sparse-checkout.sh +++ b/t/t1011-read-tree-sparse-checkout.sh @@ -17,17 +17,19 @@ test_expect_success 'setup' ' cat >expected <<-\EOF && 100644 77f0ba1734ed79d12881f81b36ee134de6a3327b 0 init.t 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 sub/added + 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 subsub/added EOF cat >expected.swt <<-\EOF && H init.t H sub/added + H subsub/added EOF test_commit init && echo modified >>init.t && - mkdir sub && - touch sub/added && - git add init.t sub/added && + mkdir sub subsub && + touch sub/added subsub/added && + git add init.t sub/added subsub/added && git commit -m "modified and added" && git tag top && git rm sub/added && @@ -81,6 +83,7 @@ test_expect_success 'match directories with trailing slash' ' cat >expected.swt-noinit <<-\EOF && S init.t H sub/added + S subsub/added EOF echo sub/ > .git/info/sparse-checkout && @@ -105,6 +108,7 @@ test_expect_success 'checkout area changes' ' cat >expected.swt-nosub <<-\EOF && H init.t S sub/added + S subsub/added EOF echo init.t >.git/info/sparse-checkout && diff --git a/t/t3032-merge-recursive-options.sh b/t/t3032-merge-recursive-options.sh new file mode 100755 index 0000000000..2293797553 --- /dev/null +++ b/t/t3032-merge-recursive-options.sh @@ -0,0 +1,186 @@ +#!/bin/sh + +test_description='merge-recursive options + +* [master] Clarify + ! [remote] Remove cruft +-- + + [remote] Remove cruft +* [master] Clarify +*+ [remote^] Initial revision +* ok 1: setup +' + +. ./test-lib.sh + +test_expect_success 'setup' ' + conflict_hunks () { + sed -n -e " + /^<<<</ b inconflict + b + : inconflict + p + /^>>>>/ b + n + b inconflict + " "$@" + } && + + cat <<-\EOF >text.txt && + Hope, he says, cherishes the soul of him who lives in + justice and holiness and is the nurse of his age and the + companion of his journey;--hope which is mightiest to sway + the restless soul of man. + + How admirable are his words! And the great blessing of riches, I do + not say to every man, but to a good man, is, that he has had no + occasion to deceive or to defraud others, either intentionally or + unintentionally; and when he departs to the world below he is not in + any apprehension about offerings due to the gods or debts which he owes + to men. Now to this peace of mind the possession of wealth greatly + contributes; and therefore I say, that, setting one thing against + another, of the many advantages which wealth has to give, to a man of + sense this is in my opinion the greatest. + + Well said, Cephalus, I replied; but as concerning justice, what is + it?--to speak the truth and to pay your debts--no more than this? And + even to this are there not exceptions? Suppose that a friend when in + his right mind has deposited arms with me and he asks for them when he + is not in his right mind, ought I to give them back to him? No one + would say that I ought or that I should be right in doing so, any more + than they would say that I ought always to speak the truth to one who + is in his condition. + + You are quite right, he replied. + + But then, I said, speaking the truth and paying your debts is not a + correct definition of justice. + + CEPHALUS - SOCRATES - POLEMARCHUS + + Quite correct, Socrates, if Simonides is to be believed, said + Polemarchus interposing. + + I fear, said Cephalus, that I must go now, for I have to look after the + sacrifices, and I hand over the argument to Polemarchus and the company. + EOF + git add text.txt && + test_tick && + git commit -m "Initial revision" && + + git checkout -b remote && + sed -e " + s/\. /\. /g + s/[?] /? /g + s/ / /g + s/--/---/g + s/but as concerning/but as con cerning/ + /CEPHALUS - SOCRATES - POLEMARCHUS/ d + " text.txt >text.txt+ && + mv text.txt+ text.txt && + git commit -a -m "Remove cruft" && + + git checkout master && + sed -e " + s/\(not in his right mind\),\(.*\)/\1;\2Q/ + s/Quite correct\(.*\)/It is too correct\1Q/ + s/unintentionally/un intentionally/ + /un intentionally/ s/$/Q/ + s/Polemarchus interposing./Polemarchus, interposing.Q/ + /justice and holiness/ s/$/Q/ + /pay your debts/ s/$/Q/ + " text.txt | q_to_cr >text.txt+ && + mv text.txt+ text.txt && + git commit -a -m "Clarify" && + git show-branch --all +' + +test_expect_success 'naive merge fails' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive HEAD^ -- HEAD remote && + test_must_fail git update-index --refresh && + grep "<<<<<<" text.txt +' + +test_expect_success '--ignore-space-change makes merge succeed' ' + git read-tree --reset -u HEAD && + git merge-recursive --ignore-space-change HEAD^ -- HEAD remote +' + +test_expect_success '--ignore-space-change: our w/s-only change wins' ' + q_to_cr <<-\EOF >expected && + justice and holiness and is the nurse of his age and theQ + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-space-change HEAD^ -- HEAD remote && + grep "justice and holiness" text.txt >actual && + test_cmp expected actual +' + +test_expect_success '--ignore-space-change: their real change wins over w/s' ' + cat <<-\EOF >expected && + it?---to speak the truth and to pay your debts---no more than this? And + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-space-change HEAD^ -- HEAD remote && + grep "pay your debts" text.txt >actual && + test_cmp expected actual +' + +test_expect_success '--ignore-space-change: does not ignore new spaces' ' + cat <<-\EOF >expected1 && + Well said, Cephalus, I replied; but as con cerning justice, what is + EOF + q_to_cr <<-\EOF >expected2 && + un intentionally; and when he departs to the world below he is not inQ + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-space-change HEAD^ -- HEAD remote && + grep "Well said" text.txt >actual1 && + grep "when he departs" text.txt >actual2 && + test_cmp expected1 actual1 && + test_cmp expected2 actual2 +' + +test_expect_success '--ignore-all-space drops their new spaces' ' + cat <<-\EOF >expected && + Well said, Cephalus, I replied; but as concerning justice, what is + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-all-space HEAD^ -- HEAD remote && + grep "Well said" text.txt >actual && + test_cmp expected actual +' + +test_expect_success '--ignore-all-space keeps our new spaces' ' + q_to_cr <<-\EOF >expected && + un intentionally; and when he departs to the world below he is not inQ + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-all-space HEAD^ -- HEAD remote && + grep "when he departs" text.txt >actual && + test_cmp expected actual +' + +test_expect_success '--ignore-space-at-eol' ' + q_to_cr <<-\EOF >expected && + <<<<<<< HEAD + is not in his right mind; ought I to give them back to him? No oneQ + ======= + is not in his right mind, ought I to give them back to him? No one + >>>>>>> remote + EOF + + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --ignore-space-at-eol \ + HEAD^ -- HEAD remote && + conflict_hunks text.txt >actual && + test_cmp expected actual +' + +test_done diff --git a/t/t3402-rebase-merge.sh b/t/t3402-rebase-merge.sh index 2bea65634a..be8c1d5ef9 100755 --- a/t/t3402-rebase-merge.sh +++ b/t/t3402-rebase-merge.sh @@ -117,4 +117,25 @@ test_expect_success 'picking rebase' ' esac ' +test_expect_success 'rebase -s funny -Xopt' ' + test_when_finished "rm -fr test-bin funny.was.run" && + mkdir test-bin && + cat >test-bin/git-merge-funny <<-EOF && + #!$SHELL_PATH + case "\$1" in --opt) ;; *) exit 2 ;; esac + shift && + >funny.was.run && + exec git merge-recursive "\$@" + EOF + chmod +x test-bin/git-merge-funny && + git reset --hard && + git checkout -b test-funny master^ && + test_commit funny && + ( + PATH=./test-bin:$PATH + git rebase -s funny -Xopt master + ) && + test -f funny.was.run +' + test_done diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh new file mode 100755 index 0000000000..1aee483510 --- /dev/null +++ b/t/t3419-rebase-patch-id.sh @@ -0,0 +1,109 @@ +#!/bin/bash + +test_description='git rebase - test patch id computation' + +. ./test-lib.sh + +test_set_prereq NOT_EXPENSIVE +test -n "$GIT_PATCHID_TIMING_TESTS" && test_set_prereq EXPENSIVE +test -x /usr/bin/time && test_set_prereq USR_BIN_TIME + +count() +{ + i=0 + while test $i -lt $1 + do + echo "$i" + i=$(($i+1)) + done +} + +scramble() +{ + i=0 + while read x + do + if test $i -ne 0 + then + echo "$x" + fi + i=$(((i+1) % 10)) + done < "$1" > "$1.new" + mv -f "$1.new" "$1" +} + +run() +{ + echo \$ "$@" + /usr/bin/time "$@" >/dev/null +} + +test_expect_success 'setup' ' + git commit --allow-empty -m initial + git tag root +' + +do_tests() +{ + pr=$1 + nlines=$2 + + test_expect_success $pr "setup: $nlines lines" " + rm -f .gitattributes && + git checkout -q -f master && + git reset --hard root && + count $nlines >file && + git add file && + git commit -q -m initial && + git branch -f other && + + scramble file && + git add file && + git commit -q -m 'change big file' && + + git checkout -q other && + : >newfile && + git add newfile && + git commit -q -m 'add small file' && + + git cherry-pick master >/dev/null 2>&1 + " + + test_debug " + run git diff master^\! + " + + test_expect_success $pr 'setup attributes' " + echo 'file binary' >.gitattributes + " + + test_debug " + run git format-patch --stdout master && + run git format-patch --stdout --ignore-if-in-upstream master + " + + test_expect_success $pr 'detect upstream patch' " + git checkout -q master && + scramble file && + git add file && + git commit -q -m 'change big file again' && + git checkout -q other^{} && + git rebase master && + test_must_fail test -n \"\$(git rev-list master...HEAD~)\" + " + + test_expect_success $pr 'do not drop patch' " + git branch -f squashed master && + git checkout -q -f squashed && + git reset -q --soft HEAD~2 && + git commit -q -m squashed && + git checkout -q other^{} && + test_must_fail git rebase squashed && + rm -rf .git/rebase-apply + " +} + +do_tests NOT_EXPENSIVE 500 +do_tests EXPENSIVE 50000 + +test_done diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 6f6948925f..408a19c4c2 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -88,4 +88,30 @@ test_expect_success SYMLINKS \ test_must_fail git diff --no-index pinky brain > output 2> output.err && grep narf output && ! grep error output.err' + +test_expect_success SYMLINKS 'setup symlinks with attributes' ' + echo "*.bin diff=bin" >>.gitattributes && + echo content >file.bin && + ln -s file.bin link.bin && + git add -N file.bin link.bin +' + +cat >expect <<'EOF' +diff --git a/file.bin b/file.bin +index e69de29..d95f3ad 100644 +Binary files a/file.bin and b/file.bin differ +diff --git a/link.bin b/link.bin +index e69de29..dce41ec 120000 +--- a/link.bin ++++ b/link.bin +@@ -0,0 +1 @@ ++file.bin +\ No newline at end of file +EOF +test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' + git config diff.bin.binary true && + git diff file.bin link.bin >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index bc46563afc..05ec062832 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -77,10 +77,6 @@ test_expect_success 'apply binary patch' \ tree1=`git write-tree` && test "$tree1" = "$tree0"' -nul_to_q() { - perl -pe 'y/\000/Q/' -} - test_expect_success 'diff --no-index with binary creation' ' echo Q | q_to_nul >binary && (: hide error code from diff, which just indicates differences diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 935d101fe8..a8736f7cbe 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -491,4 +491,41 @@ test_expect_success 'combined diff with autocrlf conversion' ' ' +# Start testing the colored format for whitespace checks + +test_expect_success 'setup diff colors' ' + git config color.diff always && + git config color.diff.plain normal && + git config color.diff.meta bold && + git config color.diff.frag cyan && + git config color.diff.func normal && + git config color.diff.old red && + git config color.diff.new green && + git config color.diff.commit yellow && + git config color.diff.whitespace "normal red" && + + git config core.autocrlf false +' +cat >expected <<\EOF +<BOLD>diff --git a/x b/x<RESET> +<BOLD>index 9daeafb..2874b91 100644<RESET> +<BOLD>--- a/x<RESET> +<BOLD>+++ b/x<RESET> +<CYAN>@@ -1 +1,4 @@<RESET> + test<RESET> +<GREEN>+<RESET><GREEN>{<RESET> +<GREEN>+<RESET><BRED> <RESET> +<GREEN>+<RESET><GREEN>}<RESET> +EOF + +test_expect_success 'diff that introduces a line with only tabs' ' + git config core.whitespace blank-at-eol && + git reset --hard && + echo "test" > x && + git commit -m "initial" x && + echo "{NTN}" | tr "NT" "\n\t" >> x && + git -c color.diff=always diff | test_decode_color >current && + test_cmp expected current +' + test_done diff --git a/t/t4034-diff-words.sh b/t/t4034-diff-words.sh index 6f7548c3a1..3f3c7577ca 100755 --- a/t/t4034-diff-words.sh +++ b/t/t4034-diff-words.sh @@ -35,10 +35,10 @@ aeff = aeff * ( aaa ) EOF cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> <RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> @@ -122,10 +122,10 @@ test_expect_success '--word-diff=plain --no-color' ' ' cat > expect <<EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> <RED>[-h(4)-]<RESET><GREEN>{+h(4),hh[44]+}<RESET> @@ -143,10 +143,10 @@ test_expect_success '--word-diff=plain --color' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> <RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> <CYAN>@@ -3,0 +4,4 @@<RESET> <RESET><MAGENTA>a = b + c<RESET> @@ -163,10 +163,10 @@ test_expect_success 'word diff without context' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>hh<RESET>[44] @@ -199,10 +199,10 @@ test_expect_success 'option overrides .gitattributes' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4)<GREEN>,hh[44]<RESET> @@ -231,10 +231,10 @@ test_expect_success 'command-line overrides config' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>{+hh+}<RESET>[44] @@ -260,10 +260,10 @@ test_expect_success 'remove diff driver regex' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>hh[44<RESET>] @@ -282,10 +282,10 @@ echo 'aaa (aaa)' > pre echo 'aaa (aaa) aaa' > post cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index c29453b..be22f37 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index c29453b..be22f37 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> aaa (aaa) <GREEN>aaa<RESET> EOF @@ -301,10 +301,10 @@ echo '(:' > pre echo '(' > post cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 289cb9d..2d06f37 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 289cb9d..2d06f37 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> (<RED>:<RESET> EOF diff --git a/t/t4041-diff-submodule-option.sh b/t/t4041-diff-submodule-option.sh index 995bdfafec..bf9a7526bd 100755 --- a/t/t4041-diff-submodule-option.sh +++ b/t/t4041-diff-submodule-option.sh @@ -37,9 +37,10 @@ head1=$(add_file sm1 foo1 foo2) test_expect_success 'added submodule' " git add sm1 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 0000000...$head1 (new submodule) EOF + test_cmp expected actual " commit_file sm1 && @@ -47,33 +48,36 @@ head2=$(add_file sm1 foo3) test_expect_success 'modified submodule(forward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward)' " git diff --submodule=log >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward) --submodule' " git diff --submodule >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " fullhead1=$(cd sm1; git rev-list --max-count=1 $head1) fullhead2=$(cd sm1; git rev-list --max-count=1 $head2) test_expect_success 'modified submodule(forward) --submodule=short' " git diff --submodule=short >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 index $head1..$head2 160000 --- a/sm1 @@ -82,6 +86,7 @@ index $head1..$head2 160000 -Subproject commit $fullhead1 +Subproject commit $fullhead2 EOF + test_cmp expected actual " commit_file sm1 && @@ -93,24 +98,26 @@ head3=$( test_expect_success 'modified submodule(backward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head2..$head3 (rewind): < Add foo3 < Add foo2 EOF + test_cmp expected actual " head4=$(add_file sm1 foo4 foo5) && head4_full=$(GIT_DIR=sm1/.git git rev-parse --verify HEAD) test_expect_success 'modified submodule(backward and forward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head2...$head4: > Add foo5 > Add foo4 < Add foo3 < Add foo2 EOF + test_cmp expected actual " commit_file sm1 && @@ -123,7 +130,7 @@ mv sm1-bak sm1 test_expect_success 'typechanged submodule(submodule->blob), --cached' " git diff --submodule=log --cached >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 41fbea9...0000000 (submodule deleted) diff --git a/sm1 b/sm1 new file mode 100644 @@ -133,11 +140,12 @@ index 0000000..9da5fb8 @@ -0,0 +1 @@ +sm1 EOF + test_cmp expected actual " test_expect_success 'typechanged submodule(submodule->blob)' " git diff --submodule=log >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 100644 index 9da5fb8..0000000 @@ -147,13 +155,14 @@ index 9da5fb8..0000000 -sm1 Submodule sm1 0000000...$head4 (new submodule) EOF + test_cmp expected actual " rm -rf sm1 && git checkout-index sm1 test_expect_success 'typechanged submodule(submodule->blob)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head4...0000000 (submodule deleted) diff --git a/sm1 b/sm1 new file mode 100644 @@ -163,6 +172,7 @@ index 0000000..$head5 @@ -0,0 +1 @@ +sm1 EOF + test_cmp expected actual " rm -f sm1 && @@ -171,15 +181,16 @@ head6=$(add_file sm1 foo6 foo7) fullhead6=$(cd sm1; git rev-list --max-count=1 $head6) test_expect_success 'nonexistent commit' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head4...$head6 (commits not present) EOF + test_cmp expected actual " commit_file test_expect_success 'typechanged submodule(blob->submodule)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 100644 index $head5..0000000 @@ -189,21 +200,24 @@ index $head5..0000000 -sm1 Submodule sm1 0000000...$head6 (new submodule) EOF + test_cmp expected actual " commit_file sm1 && test_expect_success 'submodule is up to date' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked content' " echo new > sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked content (untracked ignored)' " @@ -224,18 +238,20 @@ test_expect_success 'submodule contains untracked content (all ignored)' " test_expect_success 'submodule contains untracked and modifed content' " echo new > sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 contains modified content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked and modifed content (untracked ignored)' " echo new > sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked and modifed content (dirty ignored)' " @@ -253,45 +269,50 @@ test_expect_success 'submodule contains untracked and modifed content (all ignor test_expect_success 'submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content EOF + test_cmp expected actual " (cd sm1; git commit -mchange foo6 >/dev/null) && head8=$(cd sm1; git rev-parse --verify HEAD | cut -c1-7) && test_expect_success 'submodule is modified' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content' " echo new > sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (untracked ignored)' " git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (dirty ignored)' " git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (all ignored)' " @@ -302,31 +323,34 @@ test_expect_success 'modified submodule contains untracked content (all ignored) test_expect_success 'modified submodule contains untracked and modifed content' " echo modification >> sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (untracked ignored)' " echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (dirty ignored)' " echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (all ignored)' " @@ -338,19 +362,21 @@ test_expect_success 'modified submodule contains untracked and modifed content ( test_expect_success 'modified submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " rm -rf sm1 test_expect_success 'deleted submodule' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) EOF + test_cmp expected actual " test_create_repo sm2 && @@ -359,41 +385,45 @@ git add sm2 test_expect_success 'multiple submodules' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " test_expect_success 'path filter' " git diff-index -p --submodule=log HEAD sm2 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " commit_file sm2 test_expect_success 'given commit' " git diff-index -p --submodule=log HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " test_expect_success 'given commit --submodule' " git diff-index -p --submodule HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " fullhead7=$(cd sm2; git rev-list --max-count=1 $head7) test_expect_success 'given commit --submodule=short' " git diff-index -p --submodule=short HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 160000 index $head6..0000000 @@ -409,6 +439,7 @@ index 0000000..$head7 @@ -0,0 +1 @@ +Subproject commit $fullhead7 EOF + test_cmp expected actual " test_expect_success 'setup .git file for sm2' ' @@ -420,10 +451,11 @@ test_expect_success 'setup .git file for sm2' ' test_expect_success 'diff --submodule with .git file' ' git diff --submodule HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual ' test_done diff --git a/t/t4103-apply-binary.sh b/t/t4103-apply-binary.sh index 9692f16f35..08ad6d8b9e 100755 --- a/t/t4103-apply-binary.sh +++ b/t/t4103-apply-binary.sh @@ -37,7 +37,16 @@ test_expect_success 'setup' " git diff-tree -p -C master binary >C.diff && git diff-tree -p --binary master binary >BF.diff && - git diff-tree -p --binary -C master binary >CF.diff + git diff-tree -p --binary -C master binary >CF.diff && + + git diff-tree -p --full-index master binary >B-index.diff && + git diff-tree -p -C --full-index master binary >C-index.diff && + + git init other-repo && + (cd other-repo && + git fetch .. master && + git reset --hard FETCH_HEAD + ) " test_expect_success 'stat binary diff -- should not fail.' \ @@ -100,6 +109,22 @@ test_expect_success 'apply binary diff (copy) -- should fail.' \ 'do_reset && test_must_fail git apply --index C.diff' +test_expect_success 'apply binary diff with full-index' ' + do_reset && + git apply B-index.diff +' + +test_expect_success 'apply binary diff with full-index (copy)' ' + do_reset && + git apply C-index.diff +' + +test_expect_success 'apply full-index binary diff in new repo' ' + (cd other-repo && + do_reset && + test_must_fail git apply ../B-index.diff) +' + test_expect_success 'apply binary diff without replacement.' \ 'do_reset && git apply BF.diff' diff --git a/t/t4203-mailmap.sh b/t/t4203-mailmap.sh index 9a7d1b4466..e818de6ddd 100755 --- a/t/t4203-mailmap.sh +++ b/t/t4203-mailmap.sh @@ -4,6 +4,14 @@ test_description='.mailmap configurations' . ./test-lib.sh +fuzz_blame () { + sed " + s/$_x05[0-9a-f][0-9a-f][0-9a-f]/OBJID/g + s/$_x05[0-9a-f][0-9a-f]/OBJI/g + s/[-0-9]\{10\} [:0-9]\{8\} [-+][0-9]\{4\}/DATE/g + " "$@" +} + test_expect_success setup ' echo one >one && git add one && @@ -11,6 +19,7 @@ test_expect_success setup ' git commit -m initial && echo two >>one && git add one && + test_tick && git commit --author "nick1 <bugs@company.xx>" -m second ' @@ -54,7 +63,7 @@ Repo Guy (1): EOF test_expect_success 'mailmap.file set' ' - mkdir internal_mailmap && + mkdir -p internal_mailmap && echo "Internal Guy <bugs@company.xx>" > internal_mailmap/.mailmap && git config mailmap.file internal_mailmap/.mailmap && git shortlog HEAD >actual && @@ -93,6 +102,40 @@ test_expect_success 'mailmap.file non-existant' ' ' cat >expect <<\EOF +Internal Guy (1): + second + +Repo Guy (1): + initial + +EOF + +test_expect_success 'name entry after email entry' ' + mkdir -p internal_mailmap && + echo "<bugs@company.xy> <bugs@company.xx>" >internal_mailmap/.mailmap && + echo "Internal Guy <bugs@company.xx>" >>internal_mailmap/.mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF +Internal Guy (1): + second + +Repo Guy (1): + initial + +EOF + +test_expect_success 'name entry after email entry, case-insensitive' ' + mkdir -p internal_mailmap && + echo "<bugs@company.xy> <bugs@company.xx>" >internal_mailmap/.mailmap && + echo "Internal Guy <BUGS@Company.xx>" >>internal_mailmap/.mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF A U Thor (1): initial @@ -101,7 +144,7 @@ nick1 (1): EOF test_expect_success 'No mailmap files, but configured' ' - rm .mailmap && + rm -f .mailmap internal_mailmap/.mailmap && git shortlog HEAD >actual && test_cmp expect actual ' @@ -153,7 +196,7 @@ test_expect_success 'Shortlog output (complex mapping)' ' test_tick && git commit --author "CTO <cto@coompany.xx>" -m seventh && - mkdir internal_mailmap && + mkdir -p internal_mailmap && echo "Committed <committer@example.com>" > internal_mailmap/.mailmap && echo "<cto@company.xx> <cto@coompany.xx>" >> internal_mailmap/.mailmap && echo "Some Dude <some@dude.xx> nick1 <bugs@company.xx>" >> internal_mailmap/.mailmap && @@ -198,18 +241,18 @@ test_expect_success 'Log output (complex mapping)' ' # git blame cat >expect <<\EOF -^3a2fdcb (A U Thor 2005-04-07 15:13:13 -0700 1) one -7de6f99b (Some Dude 2005-04-07 15:13:13 -0700 2) two -5815879d (Other Author 2005-04-07 15:14:13 -0700 3) three -ff859d96 (Other Author 2005-04-07 15:15:13 -0700 4) four -5ab6d4fa (Santa Claus 2005-04-07 15:16:13 -0700 5) five -38a42d8b (Santa Claus 2005-04-07 15:17:13 -0700 6) six -8ddc0386 (CTO 2005-04-07 15:18:13 -0700 7) seven +^OBJI (A U Thor DATE 1) one +OBJID (Some Dude DATE 2) two +OBJID (Other Author DATE 3) three +OBJID (Other Author DATE 4) four +OBJID (Santa Claus DATE 5) five +OBJID (Santa Claus DATE 6) six +OBJID (CTO DATE 7) seven EOF - test_expect_success 'Blame output (complex mapping)' ' git blame one >actual && - test_cmp expect actual + fuzz_blame actual >actual.fuzz && + test_cmp expect actual.fuzz ' test_done diff --git a/t/t5523-push-upstream.sh b/t/t5523-push-upstream.sh index 00da70763b..c229fe68f1 100755 --- a/t/t5523-push-upstream.sh +++ b/t/t5523-push-upstream.sh @@ -2,9 +2,14 @@ test_description='push with --set-upstream' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-terminal.sh + +ensure_fresh_upstream() { + rm -rf parent && git init --bare parent +} test_expect_success 'setup bare parent' ' - git init --bare parent && + ensure_fresh_upstream && git remote add upstream parent ' @@ -66,4 +71,41 @@ test_expect_success 'push -u HEAD' ' check_config headbranch upstream refs/heads/headbranch ' +test_expect_success TTY 'progress messages go to tty' ' + ensure_fresh_upstream && + + test_terminal git push -u upstream master >out 2>err && + grep "Writing objects" err +' + +test_expect_success 'progress messages do not go to non-tty' ' + ensure_fresh_upstream && + + # skip progress messages, since stderr is non-tty + git push -u upstream master >out 2>err && + ! grep "Writing objects" err +' + +test_expect_success 'progress messages go to non-tty (forced)' ' + ensure_fresh_upstream && + + # force progress messages to stderr, even though it is non-tty + git push -u --progress upstream master >out 2>err && + grep "Writing objects" err +' + +test_expect_success TTY 'push -q suppresses progress' ' + ensure_fresh_upstream && + + test_terminal git push -u -q upstream master >out 2>err && + ! grep "Writing objects" err +' + +test_expect_failure TTY 'push --no-progress suppresses progress' ' + ensure_fresh_upstream && + + test_terminal git push -u --no-progress upstream master >out 2>err && + ! grep "Writing objects" err +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index cccacd4add..d918cc02d0 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -162,6 +162,14 @@ commit 131a310eb913d107dd3c09a65d1651175898735d commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873 EOF +test_expect_success '%x00 shows NUL' ' + echo >expect commit f58db70b055c5718631e5c61528b28b12090cdea && + echo >>expect fooQbar && + git rev-list -1 --format=foo%x00bar HEAD >actual.nul && + nul_to_q <actual.nul >actual && + test_cmp expect actual +' + test_expect_success '%ad respects --date=' ' echo 2005-04-07 >expect.ad-short && git log -1 --date=short --pretty=tformat:%ad >output.ad-short master && diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index d486d73994..d9f343942c 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -64,6 +64,14 @@ cp new1.txt test.txt test_expect_success "merge without conflict" \ "git merge-file test.txt orig.txt new2.txt" +test_expect_success 'works in subdirectory' ' + mkdir dir && + cp new1.txt dir/a.txt && + cp orig.txt dir/o.txt && + cp new2.txt dir/b.txt && + ( cd dir && git merge-file a.txt o.txt b.txt ) +' + cp new1.txt test.txt test_expect_success "merge without conflict (--quiet)" \ "git merge-file --quiet test.txt orig.txt new2.txt" diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index ac943f5eee..700b556fe8 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1051,13 +1051,23 @@ test_expect_success \ test_expect_success \ 'message in editor has initial comment' ' - GIT_EDITOR=cat git tag -a initial-comment > actual + ! (GIT_EDITOR=cat git tag -a initial-comment > actual) +' + +test_expect_success \ + 'message in editor has initial comment: first line' ' # check the first line --- should be empty - first=$(sed -e 1q <actual) && - test -z "$first" && + echo >first.expect && + sed -e 1q <actual >first.actual && + test_cmp first.expect first.actual +' + +test_expect_success \ + 'message in editor has initial comment: remainder' ' # remove commented lines from the remainder -- should be empty - rest=$(sed -e 1d -e '/^#/d' <actual) && - test -z "$rest" + >rest.expect + sed -e 1d -e '/^#/d' <actual >rest.actual && + test_cmp rest.expect rest.actual ' get_tag_header reuse $commit commit $time >expect diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index fb744e3c4a..5641b59559 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -4,42 +4,13 @@ test_description='Test automatic use of a pager.' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pager.sh +. "$TEST_DIRECTORY"/lib-terminal.sh cleanup_fail() { echo >&2 cleanup failed (exit 1) } -test_expect_success 'set up terminal for tests' ' - rm -f stdout_is_tty || - cleanup_fail && - - if test -t 1 - then - >stdout_is_tty - elif - test_have_prereq PERL && - "$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl \ - sh -c "test -t 1" - then - >test_terminal_works - fi -' - -if test -e stdout_is_tty -then - test_terminal() { "$@"; } - test_set_prereq TTY -elif test -e test_terminal_works -then - test_terminal() { - "$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl "$@" - } - test_set_prereq TTY -else - say "# no usable terminal, so skipping some tests" -fi - test_expect_success 'setup' ' unset GIT_PAGER GIT_PAGER_IN_USE; test_might_fail git config --unset core.pager && @@ -213,11 +184,6 @@ test_expect_success 'color when writing to a file intended for a pager' ' colorful colorful.log ' -if test_have_prereq SIMPLEPAGER && test_have_prereq TTY -then - test_set_prereq SIMPLEPAGERTTY -fi - # Use this helper to make it easy for the caller of your # terminal-using function to specify whether it should fail. # If you write @@ -253,7 +219,7 @@ parse_args() { test_default_pager() { parse_args "$@" - $test_expectation SIMPLEPAGERTTY "$cmd - default pager is used by default" " + $test_expectation SIMPLEPAGER,TTY "$cmd - default pager is used by default" " unset PAGER GIT_PAGER; test_might_fail git config --unset core.pager && rm -f default_pager_used || diff --git a/t/t7401-submodule-summary.sh b/t/t7401-submodule-summary.sh index 294584452b..7d7fde057b 100755 --- a/t/t7401-submodule-summary.sh +++ b/t/t7401-submodule-summary.sh @@ -37,11 +37,12 @@ head1=$(add_file sm1 foo1 foo2) test_expect_success 'added submodule' " git add sm1 && git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 0000000...$head1 (2): > Add foo2 EOF + test_cmp expected actual " commit_file sm1 && @@ -49,20 +50,22 @@ head2=$(add_file sm1 foo3) test_expect_success 'modified submodule(forward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head1...$head2 (1): > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward), --files' " git submodule summary --files >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head1...$head2 (1): > Add foo3 EOF + test_cmp expected actual " commit_file sm1 && @@ -74,19 +77,20 @@ head3=$( test_expect_success 'modified submodule(backward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head3 (2): < Add foo3 < Add foo2 EOF + test_cmp expected actual " head4=$(add_file sm1 foo4 foo5) && head4_full=$(GIT_DIR=sm1/.git git rev-parse --verify HEAD) test_expect_success 'modified submodule(backward and forward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head4 (4): > Add foo5 > Add foo4 @@ -94,17 +98,19 @@ test_expect_success 'modified submodule(backward and forward)' " < Add foo2 EOF + test_cmp expected actual " test_expect_success '--summary-limit' " git submodule summary -n 3 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head4 (4): > Add foo5 > Add foo4 < Add foo3 EOF + test_cmp expected actual " commit_file sm1 && @@ -117,30 +123,33 @@ mv sm1-bak sm1 test_expect_success 'typechanged submodule(submodule->blob), --cached' " git submodule summary --cached >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4(submodule)->$head5(blob) (3): < Add foo5 EOF + test_cmp actual expected " test_expect_success 'typechanged submodule(submodule->blob), --files' " git submodule summary --files >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head5(blob)->$head4(submodule) (3): > Add foo5 EOF + test_cmp actual expected " rm -rf sm1 && git checkout-index sm1 test_expect_success 'typechanged submodule(submodule->blob)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4(submodule)->$head5(blob): EOF + test_cmp actual expected " rm -f sm1 && @@ -148,31 +157,34 @@ test_create_repo sm1 && head6=$(add_file sm1 foo6 foo7) test_expect_success 'nonexistent commit' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4...$head6: Warn: sm1 doesn't contain commit $head4_full EOF + test_cmp actual expected " commit_file test_expect_success 'typechanged submodule(blob->submodule)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head5(blob)->$head6(submodule) (2): > Add foo7 EOF + test_cmp expected actual " commit_file sm1 && rm -rf sm1 test_expect_success 'deleted submodule' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: EOF + test_cmp expected actual " test_create_repo sm2 && @@ -181,34 +193,37 @@ git add sm2 test_expect_success 'multiple submodules' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " test_expect_success 'path filter' " git submodule summary sm2 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " commit_file sm2 test_expect_success 'given commit' " git submodule summary HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " test_expect_success '--for-status' " diff --git a/t/t7403-submodule-sync.sh b/t/t7403-submodule-sync.sh index 02522f9627..e5b19538b0 100755 --- a/t/t7403-submodule-sync.sh +++ b/t/t7403-submodule-sync.sh @@ -23,7 +23,9 @@ test_expect_success setup ' git commit -m "submodule" ) && git clone super super-clone && - (cd super-clone && git submodule update --init) + (cd super-clone && git submodule update --init) && + git clone super empty-clone && + (cd empty-clone && git submodule init) ' test_expect_success 'change submodule' ' @@ -64,4 +66,12 @@ test_expect_success '"git submodule sync" should update submodule URLs' ' ) ' +test_expect_success '"git submodule sync" should update submodule URLs if not yet cloned' ' + (cd empty-clone && + git pull && + git submodule sync && + test -d "$(git config submodule.submodule.url)" + ) +' + test_done diff --git a/t/t8006-blame-textconv.sh b/t/t8006-blame-textconv.sh index 9ad96d4d32..dbf623bce5 100755 --- a/t/t8006-blame-textconv.sh +++ b/t/t8006-blame-textconv.sh @@ -9,22 +9,29 @@ find_blame() { cat >helper <<'EOF' #!/bin/sh -sed 's/^/converted: /' "$@" +grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; } +sed 's/^bin: /converted: /' "$1" EOF chmod +x helper test_expect_success 'setup ' ' - echo test 1 >one.bin && - echo test number 2 >two.bin && + echo "bin: test 1" >one.bin && + echo "bin: test number 2" >two.bin && + if test_have_prereq SYMLINKS; then + ln -s one.bin symlink.bin + fi && git add . && GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" && - echo test 1 version 2 >one.bin && - echo test number 2 version 2 >>two.bin && + echo "bin: test 1 version 2" >one.bin && + echo "bin: test number 2 version 2" >>two.bin && + if test_have_prereq SYMLINKS; then + ln -sf two.bin symlink.bin + fi && GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" ' cat >expected <<EOF -(Number2 2010-01-01 20:00:00 +0000 1) test 1 version 2 +(Number2 2010-01-01 20:00:00 +0000 1) bin: test 1 version 2 EOF test_expect_success 'no filter specified' ' @@ -67,7 +74,7 @@ test_expect_success 'blame --textconv going through revisions' ' ' test_expect_success 'make a new commit' ' - echo "test number 2 version 3" >>two.bin && + echo "bin: test number 2 version 3" >>two.bin && GIT_AUTHOR_NAME=Number3 git commit -a -m Third --date="2010-01-01 22:00:00" ' @@ -77,4 +84,45 @@ test_expect_success 'blame from previous revision' ' test_cmp expected result ' +cat >expected <<EOF +(Number2 2010-01-01 20:00:00 +0000 1) two.bin +EOF + +test_expect_success SYMLINKS 'blame with --no-textconv (on symlink)' ' + git blame --no-textconv symlink.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +test_expect_success SYMLINKS 'blame --textconv (on symlink)' ' + git blame --textconv symlink.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +# cp two.bin three.bin and make small tweak +# (this will direct blame -C -C three.bin to consider two.bin and symlink.bin) +test_expect_success SYMLINKS 'make another new commit' ' + cat >three.bin <<\EOF && +bin: test number 2 +bin: test number 2 version 2 +bin: test number 2 version 3 +bin: test number 3 +EOF + git add three.bin && + GIT_AUTHOR_NAME=Number4 git commit -a -m Fourth --date="2010-01-01 23:00:00" +' + +test_expect_success SYMLINKS 'blame on last commit (-C -C, symlink)' ' + git blame -C -C three.bin >blame && + find_blame <blame >result && + cat >expected <<\EOF && +(Number1 2010-01-01 18:00:00 +0000 1) converted: test number 2 +(Number2 2010-01-01 20:00:00 +0000 2) converted: test number 2 version 2 +(Number3 2010-01-01 22:00:00 +0000 3) converted: test number 2 version 3 +(Number4 2010-01-01 23:00:00 +0000 4) converted: test number 3 +EOF + test_cmp expected result +' + test_done diff --git a/t/t8007-cat-file-textconv.sh b/t/t8007-cat-file-textconv.sh index 38ac05e4a0..78a0085e64 100755 --- a/t/t8007-cat-file-textconv.sh +++ b/t/t8007-cat-file-textconv.sh @@ -5,15 +5,19 @@ test_description='git cat-file textconv support' cat >helper <<'EOF' #!/bin/sh -sed 's/^/converted: /' "$@" +grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; } +sed 's/^bin: /converted: /' "$1" EOF chmod +x helper test_expect_success 'setup ' ' - echo test >one.bin && + echo "bin: test" >one.bin && + if test_have_prereq SYMLINKS; then + ln -s one.bin symlink.bin + fi && git add . && GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" && - echo test version 2 >one.bin && + echo "bin: test version 2" >one.bin && GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" ' @@ -33,7 +37,7 @@ test_expect_success 'setup textconv filters' ' ' cat >expected <<EOF -test version 2 +bin: test version 2 EOF test_expect_success 'cat-file without --textconv' ' @@ -42,7 +46,7 @@ test_expect_success 'cat-file without --textconv' ' ' cat >expected <<EOF -test +bin: test EOF test_expect_success 'cat-file without --textconv on previous commit' ' @@ -67,4 +71,28 @@ test_expect_success 'cat-file --textconv on previous commit' ' git cat-file --textconv HEAD^:one.bin >result && test_cmp expected result ' + +test_expect_success SYMLINKS 'cat-file without --textconv (symlink)' ' + git cat-file blob :symlink.bin >result && + printf "%s" "one.bin" >expected + test_cmp expected result +' + + +test_expect_success SYMLINKS 'cat-file --textconv on index (symlink)' ' + ! git cat-file --textconv :symlink.bin 2>result && + cat >expected <<\EOF && +fatal: git cat-file --textconv: unable to run textconv on :symlink.bin +EOF + test_cmp expected result +' + +test_expect_success SYMLINKS 'cat-file --textconv on HEAD (symlink)' ' + ! git cat-file --textconv HEAD:symlink.bin 2>result && + cat >expected <<EOF && +fatal: git cat-file --textconv: unable to run textconv on HEAD:symlink.bin +EOF + test_cmp expected result +' + test_done diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index a298eb0437..d1ba25205b 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -201,10 +201,28 @@ test_expect_success $PREREQ 'Prompting works' ' grep "^To: to@example.com\$" msgtxt1 ' +test_expect_success $PREREQ 'tocmd works' ' + clean_fake_sendmail && + cp $patches tocmd.patch && + echo tocmd--tocmd@example.com >>tocmd.patch && + { + echo "#!$SHELL_PATH" + echo sed -n -e s/^tocmd--//p \"\$1\" + } > tocmd-sed && + chmod +x tocmd-sed && + git send-email \ + --from="Example <nobody@example.com>" \ + --to-cmd=./tocmd-sed \ + --smtp-server="$(pwd)/fake.sendmail" \ + tocmd.patch \ + && + grep "^To: tocmd@example.com" msgtxt1 +' + test_expect_success $PREREQ 'cccmd works' ' clean_fake_sendmail && cp $patches cccmd.patch && - echo cccmd--cccmd@example.com >>cccmd.patch && + echo "cccmd-- cccmd@example.com" >>cccmd.patch && { echo "#!$SHELL_PATH" echo sed -n -e s/^cccmd--//p \"\$1\" @@ -947,6 +965,45 @@ test_expect_success $PREREQ '--no-bcc overrides sendemail.bcc' ' ! grep "RCPT TO:<other@ex.com>" stdout ' +test_expect_success $PREREQ 'patches To headers are used by default' ' + patch=`git format-patch -1 --to="bodies@example.com"` && + test_when_finished "rm $patch" && + git send-email \ + --dry-run \ + --from="Example <nobody@example.com>" \ + --smtp-server relay.example.com \ + $patch >stdout && + grep "RCPT TO:<bodies@example.com>" stdout +' + +test_expect_success $PREREQ 'patches To headers are appended to' ' + patch=`git format-patch -1 --to="bodies@example.com"` && + test_when_finished "rm $patch" && + git send-email \ + --dry-run \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server relay.example.com \ + $patch >stdout && + grep "RCPT TO:<bodies@example.com>" stdout && + grep "RCPT TO:<nobody@example.com>" stdout +' + +test_expect_success $PREREQ 'To headers from files reset each patch' ' + patch1=`git format-patch -1 --to="bodies@example.com"` && + patch2=`git format-patch -1 --to="other@example.com" HEAD~` && + test_when_finished "rm $patch1 && rm $patch2" && + git send-email \ + --dry-run \ + --from="Example <nobody@example.com>" \ + --to="nobody@example.com" \ + --smtp-server relay.example.com \ + $patch1 $patch2 >stdout && + test $(grep -c "RCPT TO:<bodies@example.com>" stdout) = 1 && + test $(grep -c "RCPT TO:<nobody@example.com>" stdout) = 2 && + test $(grep -c "RCPT TO:<other@example.com>" stdout) = 1 +' + test_expect_success $PREREQ 'setup expect' ' cat >email-using-8bit <<EOF From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 diff --git a/t/t9700/test.pl b/t/t9700/test.pl index 671f38db2b..c15ca2d647 100755 --- a/t/t9700/test.pl +++ b/t/t9700/test.pl @@ -1,7 +1,7 @@ #!/usr/bin/perl use lib (split(/:/, $ENV{GITPERLLIB})); -use 5.006002; +use 5.008; use warnings; use strict; diff --git a/t/test-lib.sh b/t/test-lib.sh index 2af8f10c83..38e5a59ff7 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -238,14 +238,51 @@ test_set_editor () { } test_decode_color () { - sed -e 's/.\[1m/<WHITE>/g' \ - -e 's/.\[31m/<RED>/g' \ - -e 's/.\[32m/<GREEN>/g' \ - -e 's/.\[33m/<YELLOW>/g' \ - -e 's/.\[34m/<BLUE>/g' \ - -e 's/.\[35m/<MAGENTA>/g' \ - -e 's/.\[36m/<CYAN>/g' \ - -e 's/.\[m/<RESET>/g' + awk ' + function name(n) { + if (n == 0) return "RESET"; + if (n == 1) return "BOLD"; + if (n == 30) return "BLACK"; + if (n == 31) return "RED"; + if (n == 32) return "GREEN"; + if (n == 33) return "YELLOW"; + if (n == 34) return "BLUE"; + if (n == 35) return "MAGENTA"; + if (n == 36) return "CYAN"; + if (n == 37) return "WHITE"; + if (n == 40) return "BLACK"; + if (n == 41) return "BRED"; + if (n == 42) return "BGREEN"; + if (n == 43) return "BYELLOW"; + if (n == 44) return "BBLUE"; + if (n == 45) return "BMAGENTA"; + if (n == 46) return "BCYAN"; + if (n == 47) return "BWHITE"; + } + { + while (match($0, /\x1b\[[0-9;]*m/) != 0) { + printf "%s<", substr($0, 1, RSTART-1); + codes = substr($0, RSTART+2, RLENGTH-3); + if (length(codes) == 0) + printf "%s", name(0) + else { + n = split(codes, ary, ";"); + sep = ""; + for (i = 1; i <= n; i++) { + printf "%s%s", sep, name(ary[i]); + sep = ";" + } + } + printf ">"; + $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1); + } + print + } + ' +} + +nul_to_q () { + perl -pe 'y/\000/Q/' } q_to_nul () { @@ -362,6 +399,15 @@ test_have_prereq () { test $total_prereq = $ok_prereq } +test_declared_prereq () { + case ",$test_prereq," in + *,$1,*) + return 0 + ;; + esac + return 1 +} + # You are not expected to call test_ok_ and test_failure_ directly, use # the text_expect_* functions instead. @@ -414,17 +460,17 @@ test_skip () { break esac done - if test -z "$to_skip" && test -n "$prereq" && - ! test_have_prereq "$prereq" + if test -z "$to_skip" && test -n "$test_prereq" && + ! test_have_prereq "$test_prereq" then to_skip=t fi case "$to_skip" in t) of_prereq= - if test "$missing_prereq" != "$prereq" + if test "$missing_prereq" != "$test_prereq" then - of_prereq=" of $prereq" + of_prereq=" of $test_prereq" fi say_color skip >&3 "skipping test: $@" @@ -438,9 +484,10 @@ test_skip () { } test_expect_failure () { - test "$#" = 3 && { prereq=$1; shift; } || prereq= + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-failure" + export test_prereq if ! test_skip "$@" then say >&3 "checking known breakage: $2" @@ -456,9 +503,10 @@ test_expect_failure () { } test_expect_success () { - test "$#" = 3 && { prereq=$1; shift; } || prereq= + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-success" + export test_prereq if ! test_skip "$@" then say >&3 "expecting success: $2" @@ -500,11 +548,12 @@ test_expect_code () { # Usage: test_external description command arguments... # Example: test_external 'Perl API' perl ../path/to/test.pl test_external () { - test "$#" = 4 && { prereq=$1; shift; } || prereq= + test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 3 || error >&5 "bug in the test script: not 3 or 4 parameters to test_external" descr="$1" shift + export test_prereq if ! test_skip "$descr" "$@" then # Announce the script to reduce confusion about the diff --git a/t/t7006/test-terminal.perl b/t/test-terminal.perl index 73ff809371..ee01eb957e 100755 --- a/t/t7006/test-terminal.perl +++ b/t/test-terminal.perl @@ -1,17 +1,19 @@ #!/usr/bin/perl +use 5.008; use strict; use warnings; use IO::Pty; use File::Copy; -# Run @$argv in the background with stdout redirected to $out. +# Run @$argv in the background with stdio redirected to $out and $err. sub start_child { - my ($argv, $out) = @_; + my ($argv, $out, $err) = @_; my $pid = fork; if (not defined $pid) { die "fork failed: $!" } elsif ($pid == 0) { open STDOUT, ">&", $out; + open STDERR, ">&", $err; close $out; exec(@$argv) or die "cannot exec '$argv->[0]': $!" } @@ -47,12 +49,28 @@ sub xsendfile { copy($in, $out, 4096) or $!{EIO} or die "cannot copy from child: $!"; } +sub copy_stdio { + my ($out, $err) = @_; + my $pid = fork; + defined $pid or die "fork failed: $!"; + if (!$pid) { + close($out); + xsendfile(\*STDERR, $err); + exit 0; + } + close($err); + xsendfile(\*STDOUT, $out); + finish_child($pid) == 0 + or exit 1; +} + if ($#ARGV < 1) { die "usage: test-terminal program args"; } -my $master = new IO::Pty; -my $slave = $master->slave; -my $pid = start_child(\@ARGV, $slave); -close $slave; -xsendfile(\*STDOUT, $master); +my $master_out = new IO::Pty; +my $master_err = new IO::Pty; +my $pid = start_child(\@ARGV, $master_out->slave, $master_err->slave); +close $master_out->slave; +close $master_err->slave; +copy_stdio($master_out, $master_err); exit(finish_child($pid)); diff --git a/transport.c b/transport.c index 4dba6f8815..0078660611 100644 --- a/transport.c +++ b/transport.c @@ -789,6 +789,7 @@ static int git_transport_push(struct transport *transport, struct ref *remote_re args.use_thin_pack = data->options.thin; args.verbose = (transport->verbose > 0); args.quiet = (transport->verbose < 0); + args.progress = transport->progress; args.dry_run = !!(flags & TRANSPORT_PUSH_DRY_RUN); args.porcelain = !!(flags & TRANSPORT_PUSH_PORCELAIN); diff --git a/tree-diff.c b/tree-diff.c index cd659c6fe4..12c9a88884 100644 --- a/tree-diff.c +++ b/tree-diff.c @@ -85,6 +85,8 @@ static int compare_tree_entry(struct tree_desc *t1, struct tree_desc *t2, const /* * Is a tree entry interesting given the pathspec we have? * + * Pre-condition: baselen == 0 || base[baselen-1] == '/' + * * Return: * - 2 for "yes, and all subsequent entries will be" * - 1 for yes @@ -101,7 +103,7 @@ static int tree_entry_interesting(struct tree_desc *desc, const char *base, int int never_interesting = -1; if (!opt->nr_paths) - return 1; + return 2; sha1 = tree_entry_extract(desc, &path, &mode); @@ -257,19 +259,12 @@ static void show_entry(struct diff_options *opt, const char *prefix, struct tree } } -static void skip_uninteresting(struct tree_desc *t, const char *base, int baselen, struct diff_options *opt) +static void skip_uninteresting(struct tree_desc *t, const char *base, int baselen, struct diff_options *opt, int *all_interesting) { - int all_interesting = 0; while (t->size) { - int show; - - if (all_interesting) - show = 1; - else { - show = tree_entry_interesting(t, base, baselen, opt); - if (show == 2) - all_interesting = 1; - } + int show = tree_entry_interesting(t, base, baselen, opt); + if (show == 2) + *all_interesting = 1; if (!show) { update_tree_entry(t); continue; @@ -284,14 +279,20 @@ static void skip_uninteresting(struct tree_desc *t, const char *base, int basele int diff_tree(struct tree_desc *t1, struct tree_desc *t2, const char *base, struct diff_options *opt) { int baselen = strlen(base); + int all_t1_interesting = 0; + int all_t2_interesting = 0; for (;;) { if (DIFF_OPT_TST(opt, QUICK) && DIFF_OPT_TST(opt, HAS_CHANGES)) break; if (opt->nr_paths) { - skip_uninteresting(t1, base, baselen, opt); - skip_uninteresting(t2, base, baselen, opt); + if (!all_t1_interesting) + skip_uninteresting(t1, base, baselen, opt, + &all_t1_interesting); + if (!all_t2_interesting) + skip_uninteresting(t2, base, baselen, opt, + &all_t2_interesting); } if (!t1->size) { if (!t2->size) diff --git a/upload-pack.c b/upload-pack.c index 92f9530c65..f05e4229d0 100644 --- a/upload-pack.c +++ b/upload-pack.c @@ -11,7 +11,7 @@ #include "list-objects.h" #include "run-command.h" -static const char upload_pack_usage[] = "git upload-pack [--strict] [--timeout=nn] <dir>"; +static const char upload_pack_usage[] = "git upload-pack [--strict] [--timeout=<n>] <dir>"; /* bits #0..7 in revision.h, #8..10 in commit.c */ #define THEY_HAVE (1u << 11) @@ -174,8 +174,11 @@ static unsigned ws_check_emit_1(const char *line, int len, unsigned ws_rule, } } + if (trailing_whitespace == -1) + trailing_whitespace = len; + /* Check indentation */ - for (i = 0; i < len; i++) { + for (i = 0; i < trailing_whitespace; i++) { if (line[i] == ' ') continue; if (line[i] != '\t') @@ -218,8 +221,6 @@ static unsigned ws_check_emit_1(const char *line, int len, unsigned ws_rule, * Now the rest of the line starts at "written". * The non-highlighted part ends at "trailing_whitespace". */ - if (trailing_whitespace == -1) - trailing_whitespace = len; /* Emit non-highlighted (middle) segment. */ if (trailing_whitespace - written > 0) { diff --git a/xdiff/xemit.c b/xdiff/xemit.c index c4bedf0d1c..277e2eec5b 100644 --- a/xdiff/xemit.c +++ b/xdiff/xemit.c @@ -85,27 +85,6 @@ static long def_ff(const char *rec, long len, char *buf, long sz, void *priv) return -1; } -static void xdl_find_func(xdfile_t *xf, long i, char *buf, long sz, long *ll, - find_func_t ff, void *ff_priv) { - - /* - * Be quite stupid about this for now. Find a line in the old file - * before the start of the hunk (and context) which starts with a - * plausible character. - */ - - const char *rec; - long len; - - while (i-- > 0) { - len = xdl_get_rec(xf, i, &rec); - if ((*ll = ff(rec, len, buf, sz, ff_priv)) >= 0) - return; - } - *ll = 0; -} - - static int xdl_emit_common(xdfenv_t *xe, xdchange_t *xscr, xdemitcb_t *ecb, xdemitconf_t const *xecfg) { xdfile_t *xdf = &xe->xdf1; @@ -127,6 +106,7 @@ int xdl_emit_diff(xdfenv_t *xe, xdchange_t *xscr, xdemitcb_t *ecb, xdchange_t *xch, *xche; char funcbuf[80]; long funclen = 0; + long funclineprev = -1; find_func_t ff = xecfg->find_func ? xecfg->find_func : def_ff; if (xecfg->flags & XDL_EMIT_COMMON) @@ -150,9 +130,19 @@ int xdl_emit_diff(xdfenv_t *xe, xdchange_t *xscr, xdemitcb_t *ecb, */ if (xecfg->flags & XDL_EMIT_FUNCNAMES) { - xdl_find_func(&xe->xdf1, s1, funcbuf, - sizeof(funcbuf), &funclen, - ff, xecfg->find_func_priv); + long l; + for (l = s1 - 1; l >= 0 && l > funclineprev; l--) { + const char *rec; + long reclen = xdl_get_rec(&xe->xdf1, l, &rec); + long newfunclen = ff(rec, reclen, funcbuf, + sizeof(funcbuf), + xecfg->find_func_priv); + if (newfunclen >= 0) { + funclen = newfunclen; + break; + } + } + funclineprev = s1 - 1; } if (xdl_emit_hunk_hdr(s1 + 1, e1 - s1, s2 + 1, e2 - s2, funcbuf, funclen, ecb) < 0) |