diff options
| -rw-r--r-- | builtin/stash.c | 165 | ||||
| -rw-r--r-- | t/lib-submodule-update.sh | 16 | ||||
| -rwxr-xr-x | t/t7012-skip-worktree-writing.sh | 88 |
3 files changed, 212 insertions, 57 deletions
diff --git a/builtin/stash.c b/builtin/stash.c index e1f8235fdd..9bc85f91cd 100644 --- a/builtin/stash.c +++ b/builtin/stash.c @@ -325,35 +325,6 @@ static void add_diff_to_buf(struct diff_queue_struct *q, } } -static int get_newly_staged(struct strbuf *out, struct object_id *c_tree) -{ - struct child_process cp = CHILD_PROCESS_INIT; - const char *c_tree_hex = oid_to_hex(c_tree); - - /* - * diff-index is very similar to diff-tree above, and should be - * converted together with update_index. - */ - cp.git_cmd = 1; - strvec_pushl(&cp.args, "diff-index", "--cached", "--name-only", - "--diff-filter=A", NULL); - strvec_push(&cp.args, c_tree_hex); - return pipe_command(&cp, NULL, 0, out, 0, NULL, 0); -} - -static int update_index(struct strbuf *out) -{ - struct child_process cp = CHILD_PROCESS_INIT; - - /* - * Update-index is very complicated and may need to have a public - * function exposed in order to remove this forking. - */ - cp.git_cmd = 1; - strvec_pushl(&cp.args, "update-index", "--add", "--stdin", NULL); - return pipe_command(&cp, out->buf, out->len, NULL, 0, NULL, 0); -} - static int restore_untracked(struct object_id *u_tree) { int res; @@ -385,6 +356,121 @@ static int restore_untracked(struct object_id *u_tree) return res; } +static void unstage_changes_unless_new(struct object_id *orig_tree) +{ + /* + * When we enter this function, there has been a clean merge of + * relevant trees, and the merge logic always stages whatever merges + * cleanly. We want to unstage those changes, unless it corresponds + * to a file that didn't exist as of orig_tree. + * + * However, if any SKIP_WORKTREE path is modified relative to + * orig_tree, then we want to clear the SKIP_WORKTREE bit and write + * it to the worktree before unstaging. + */ + + struct checkout state = CHECKOUT_INIT; + struct diff_options diff_opts; + struct lock_file lock = LOCK_INIT; + int i; + + /* If any entries have skip_worktree set, we'll have to check 'em out */ + state.force = 1; + state.quiet = 1; + state.refresh_cache = 1; + state.istate = &the_index; + + /* + * Step 1: get a difference between orig_tree (which corresponding + * to the index before a merge was run) and the current index + * (reflecting the changes brought in by the merge). + */ + diff_setup(&diff_opts); + diff_opts.flags.recursive = 1; + diff_opts.detect_rename = 0; + diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT; + diff_setup_done(&diff_opts); + + do_diff_cache(orig_tree, &diff_opts); + diffcore_std(&diff_opts); + + /* Iterate over the paths that changed due to the merge... */ + for (i = 0; i < diff_queued_diff.nr; i++) { + struct diff_filepair *p; + struct cache_entry *ce; + int pos; + + /* Look up the path's position in the current index. */ + p = diff_queued_diff.queue[i]; + pos = index_name_pos(&the_index, p->two->path, + strlen(p->two->path)); + + /* + * Step 2: Place changes in the working tree + * + * Stash is about restoring changes *to the working tree*. + * So if the merge successfully got a new version of some + * path, but left it out of the working tree, then clear the + * SKIP_WORKTREE bit and write it to the working tree. + */ + if (pos >= 0 && ce_skip_worktree(active_cache[pos])) { + struct stat st; + + ce = active_cache[pos]; + if (!lstat(ce->name, &st)) { + /* Conflicting path present; relocate it */ + struct strbuf new_path = STRBUF_INIT; + int fd; + + strbuf_addf(&new_path, + "%s.stash.XXXXXX", ce->name); + fd = xmkstemp(new_path.buf); + close(fd); + printf(_("WARNING: Untracked file in way of " + "tracked file! Renaming\n " + " %s -> %s\n" + " to make room.\n"), + ce->name, new_path.buf); + if (rename(ce->name, new_path.buf)) + die("Failed to move %s to %s\n", + ce->name, new_path.buf); + strbuf_release(&new_path); + } + checkout_entry(ce, &state, NULL, NULL); + ce->ce_flags &= ~CE_SKIP_WORKTREE; + } + + /* + * Step 3: "unstage" changes, as long as they are still tracked + */ + if (p->one->oid_valid) { + /* + * Path existed in orig_tree; restore index entry + * from that tree in order to "unstage" the changes. + */ + int option = ADD_CACHE_OK_TO_REPLACE; + if (pos < 0) + option = ADD_CACHE_OK_TO_ADD; + + ce = make_cache_entry(&the_index, + p->one->mode, + &p->one->oid, + p->one->path, + 0, 0); + add_index_entry(&the_index, ce, option); + } + } + diff_flush(&diff_opts); + + /* + * Step 4: write the new index to disk + */ + repo_hold_locked_index(the_repository, &lock, LOCK_DIE_ON_ERROR); + if (write_locked_index(&the_index, &lock, + COMMIT_LOCK | SKIP_IF_UNCHANGED)) + die(_("Unable to write index.")); +} + static int do_apply_stash(const char *prefix, struct stash_info *info, int index, int quiet) { @@ -467,26 +553,7 @@ static int do_apply_stash(const char *prefix, struct stash_info *info, if (reset_tree(&index_tree, 0, 0)) return -1; } else { - struct strbuf out = STRBUF_INIT; - - if (get_newly_staged(&out, &c_tree)) { - strbuf_release(&out); - return -1; - } - - if (reset_tree(&c_tree, 0, 1)) { - strbuf_release(&out); - return -1; - } - - ret = update_index(&out); - strbuf_release(&out); - if (ret) - return -1; - - /* read back the result of update_index() back from the disk */ - discard_cache(); - read_cache(); + unstage_changes_unless_new(&c_tree); } if (!quiet) { diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index bd3fa3c6da..4b714e9308 100644 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -316,14 +316,7 @@ test_submodule_switch_common () { command="$1" ######################### Appearing submodule ######################### # Switching to a commit letting a submodule appear creates empty dir ... - if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1 - then - # Restoring stash fails to restore submodule index entry - RESULT="failure" - else - RESULT="success" - fi - test_expect_$RESULT "$command: added submodule creates empty directory" ' + test_expect_success "$command: added submodule creates empty directory" ' prolog && reset_work_tree_to no_submodule && ( @@ -337,6 +330,13 @@ test_submodule_switch_common () { ) ' # ... and doesn't care if it already exists. + if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1 + then + # Restoring stash fails to restore submodule index entry + RESULT="failure" + else + RESULT="success" + fi test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" ' prolog && reset_work_tree_to no_submodule && diff --git a/t/t7012-skip-worktree-writing.sh b/t/t7012-skip-worktree-writing.sh index 7476781979..e5c6a038fb 100755 --- a/t/t7012-skip-worktree-writing.sh +++ b/t/t7012-skip-worktree-writing.sh @@ -149,6 +149,94 @@ test_expect_success '--ignore-skip-worktree-entries leaves worktree alone' ' --diff-filter=D -- keep-me.t ' +test_expect_success 'stash restore in sparse checkout' ' + test_create_repo stash-restore && + ( + cd stash-restore && + + mkdir subdir && + echo A >subdir/A && + echo untouched >untouched && + echo removeme >removeme && + echo modified >modified && + git add . && + git commit -m Initial && + + echo AA >>subdir/A && + echo addme >addme && + echo tweaked >>modified && + rm removeme && + git add addme && + + git stash push && + + git sparse-checkout set subdir && + + # Ensure after sparse-checkout we only have expected files + cat >expect <<-EOF && + S modified + S removeme + H subdir/A + S untouched + EOF + git ls-files -t >actual && + test_cmp expect actual && + + test_path_is_missing addme && + test_path_is_missing modified && + test_path_is_missing removeme && + test_path_is_file subdir/A && + test_path_is_missing untouched && + + # Put a file in the working directory in the way + echo in the way >modified && + git stash apply && + + # Ensure stash vivifies modifies paths... + cat >expect <<-EOF && + H addme + H modified + H removeme + H subdir/A + S untouched + EOF + git ls-files -t >actual && + test_cmp expect actual && + + # ...and that the paths show up in status as changed... + cat >expect <<-EOF && + A addme + M modified + D removeme + M subdir/A + ?? actual + ?? expect + ?? modified.stash.XXXXXX + EOF + git status --porcelain | \ + sed -e s/stash......./stash.XXXXXX/ >actual && + test_cmp expect actual && + + # ...and that working directory reflects the files correctly + test_path_is_file addme && + test_path_is_file modified && + test_path_is_missing removeme && + test_path_is_file subdir/A && + test_path_is_missing untouched && + + # ...including that we have the expected "modified" file... + cat >expect <<-EOF && + modified + tweaked + EOF + test_cmp expect modified && + + # ...and that the other "modified" file is still present... + echo in the way >expect && + test_cmp expect modified.stash.* + ) +' + #TODO test_expect_failure 'git-apply adds file' false #TODO test_expect_failure 'git-apply updates file' false #TODO test_expect_failure 'git-apply removes file' false |