diff options
| -rw-r--r-- | Documentation/config/advice.txt | 3 | ||||
| -rw-r--r-- | Documentation/config/submodule.txt | 37 | ||||
| -rw-r--r-- | Documentation/git-branch.txt | 19 | ||||
| -rw-r--r-- | advice.c | 1 | ||||
| -rw-r--r-- | advice.h | 1 | ||||
| -rw-r--r-- | branch.c | 277 | ||||
| -rw-r--r-- | branch.h | 60 | ||||
| -rw-r--r-- | builtin/branch.c | 70 | ||||
| -rw-r--r-- | builtin/checkout.c | 3 | ||||
| -rw-r--r-- | builtin/submodule--helper.c | 38 | ||||
| -rw-r--r-- | submodule-config.c | 61 | ||||
| -rw-r--r-- | submodule-config.h | 34 | ||||
| -rw-r--r-- | submodule.c | 11 | ||||
| -rw-r--r-- | submodule.h | 3 | ||||
| -rwxr-xr-x | t/t3200-branch.sh | 17 | ||||
| -rwxr-xr-x | t/t3207-branch-submodule.sh | 292 |
16 files changed, 846 insertions, 81 deletions
diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index 063eec2511..adee26fbbb 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -116,6 +116,9 @@ advice.*:: submoduleAlternateErrorStrategyDie:: Advice shown when a submodule.alternateErrorStrategy option configured to "die" causes a fatal error. + submodulesNotUpdated:: + Advice shown when a user runs a submodule command that fails + because `git submodule update --init` was not run. addIgnoredFile:: Advice shown if a user attempts to add an ignored file to the index. diff --git a/Documentation/config/submodule.txt b/Documentation/config/submodule.txt index ee454f8126..6490527b45 100644 --- a/Documentation/config/submodule.txt +++ b/Documentation/config/submodule.txt @@ -59,18 +59,33 @@ submodule.active:: submodule.recurse:: A boolean indicating if commands should enable the `--recurse-submodules` - option by default. - Applies to all commands that support this option - (`checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, `reset`, - `restore` and `switch`) except `clone` and `ls-files`. + option by default. Defaults to false. ++ +When set to true, it can be deactivated via the +`--no-recurse-submodules` option. Note that some Git commands +lacking this option may call some of the above commands affected by +`submodule.recurse`; for instance `git remote update` will call +`git fetch` but does not have a `--no-recurse-submodules` option. +For these commands a workaround is to temporarily change the +configuration value by using `git -c submodule.recurse=0`. ++ +The following list shows the commands that accept +`--recurse-submodules` and whether they are supported by this +setting. + +* `checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, +`reset`, `restore` and `switch` are always supported. +* `clone` and `ls-files` are not supported. +* `branch` is supported only if `submodule.propagateBranches` is +enabled + +submodule.propagateBranches:: + [EXPERIMENTAL] A boolean that enables branching support when + using `--recurse-submodules` or `submodule.recurse=true`. + Enabling this will allow certain commands to accept + `--recurse-submodules` and certain commands that already accept + `--recurse-submodules` will now consider branches. Defaults to false. - When set to true, it can be deactivated via the - `--no-recurse-submodules` option. Note that some Git commands - lacking this option may call some of the above commands affected by - `submodule.recurse`; for instance `git remote update` will call - `git fetch` but does not have a `--no-recurse-submodules` option. - For these commands a workaround is to temporarily change the - configuration value by using `git -c submodule.recurse=0`. submodule.fetchJobs:: Specifies how many submodules are fetched/cloned at the same time. diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 731e340cbc..c8b4f9ce3c 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -16,7 +16,8 @@ SYNOPSIS [--points-at <object>] [--format=<format>] [(-r | --remotes) | (-a | --all)] [--list] [<pattern>...] -'git branch' [--track[=(direct|inherit)] | --no-track] [-f] <branchname> [<start-point>] +'git branch' [--track[=(direct|inherit)] | --no-track] [-f] + [--recurse-submodules] <branchname> [<start-point>] 'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>] 'git branch' --unset-upstream [<branchname>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> @@ -235,6 +236,22 @@ how the `branch.<name>.remote` and `branch.<name>.merge` options are used. Do not set up "upstream" configuration, even if the branch.autoSetupMerge configuration variable is set. +--recurse-submodules:: + THIS OPTION IS EXPERIMENTAL! Causes the current command to + recurse into submodules if `submodule.propagateBranches` is + enabled. See `submodule.propagateBranches` in + linkgit:git-config[1]. Currently, only branch creation is + supported. ++ +When used in branch creation, a new branch <branchname> will be created +in the superproject and all of the submodules in the superproject's +<start-point>. In submodules, the branch will point to the submodule +commit in the superproject's <start-point> but the branch's tracking +information will be set up based on the submodule's branches and remotes +e.g. `git branch --recurse-submodules topic origin/main` will create the +submodule branch "topic" that points to the submodule commit in the +superproject's "origin/main", but tracks the submodule's "origin/main". + --set-upstream:: As this option had confusing syntax, it is no longer supported. Please use `--track` or `--set-upstream-to` instead. @@ -70,6 +70,7 @@ static struct { [ADVICE_STATUS_HINTS] = { "statusHints", 1 }, [ADVICE_STATUS_U_OPTION] = { "statusUoption", 1 }, [ADVICE_SUBMODULE_ALTERNATE_ERROR_STRATEGY_DIE] = { "submoduleAlternateErrorStrategyDie", 1 }, + [ADVICE_SUBMODULES_NOT_UPDATED] = { "submodulesNotUpdated", 1 }, [ADVICE_UPDATE_SPARSE_PATH] = { "updateSparsePath", 1 }, [ADVICE_WAITING_FOR_EDITOR] = { "waitingForEditor", 1 }, }; @@ -44,6 +44,7 @@ struct string_list; ADVICE_STATUS_HINTS, ADVICE_STATUS_U_OPTION, ADVICE_SUBMODULE_ALTERNATE_ERROR_STRATEGY_DIE, + ADVICE_SUBMODULES_NOT_UPDATED, ADVICE_UPDATE_SPARSE_PATH, ADVICE_WAITING_FOR_EDITOR, ADVICE_SKIPPED_CHERRY_PICKS, @@ -8,6 +8,8 @@ #include "sequencer.h" #include "commit.h" #include "worktree.h" +#include "submodule-config.h" +#include "run-command.h" struct tracking { struct refspec_item spec; @@ -218,9 +220,11 @@ static int inherit_tracking(struct tracking *tracking, const char *orig_ref) } /* - * This is called when new_ref is branched off of orig_ref, and tries - * to infer the settings for branch.<new_ref>.{remote,merge} from the - * config. + * Used internally to set the branch.<new_ref>.{remote,merge} config + * settings so that branch 'new_ref' tracks 'orig_ref'. Unlike + * dwim_and_setup_tracking(), this does not do DWIM, i.e. "origin/main" + * will not be expanded to "refs/remotes/origin/main", so it is not safe + * for 'orig_ref' to be raw user input. */ static void setup_tracking(const char *new_ref, const char *orig_ref, enum branch_track track, int quiet) @@ -235,7 +239,7 @@ static void setup_tracking(const char *new_ref, const char *orig_ref, if (track != BRANCH_TRACK_INHERIT) for_each_remote(find_tracked_branch, &tracking); else if (inherit_tracking(&tracking, orig_ref)) - return; + goto cleanup; if (!tracking.matches) switch (track) { @@ -245,7 +249,7 @@ static void setup_tracking(const char *new_ref, const char *orig_ref, case BRANCH_TRACK_INHERIT: break; default: - return; + goto cleanup; } if (tracking.matches > 1) @@ -258,7 +262,8 @@ static void setup_tracking(const char *new_ref, const char *orig_ref, tracking.remote, tracking.srcs) < 0) exit(-1); - string_list_clear(tracking.srcs, 0); +cleanup: + string_list_clear(&tracking_srcs, 0); } int read_branch_desc(struct strbuf *buf, const char *branch_name) @@ -346,31 +351,37 @@ N_("\n" "will track its remote counterpart, you may want to use\n" "\"git push -u\" to set the upstream config as you push."); -void create_branch(struct repository *r, - const char *name, const char *start_name, - int force, int clobber_head_ok, int reflog, - int quiet, enum branch_track track) +/** + * DWIMs a user-provided ref to determine the starting point for a + * branch and validates it, where: + * + * - r is the repository to validate the branch for + * + * - start_name is the ref that we would like to test. This is + * expanded with DWIM and assigned to out_real_ref. + * + * - track is the tracking mode of the new branch. If tracking is + * explicitly requested, start_name must be a branch (because + * otherwise start_name cannot be tracked) + * + * - out_oid is an out parameter containing the object_id of start_name + * + * - out_real_ref is an out parameter containing the full, 'real' form + * of start_name e.g. refs/heads/main instead of main + * + */ +static void dwim_branch_start(struct repository *r, const char *start_name, + enum branch_track track, char **out_real_ref, + struct object_id *out_oid) { struct commit *commit; struct object_id oid; char *real_ref; - struct strbuf ref = STRBUF_INIT; - int forcing = 0; - int dont_change_ref = 0; int explicit_tracking = 0; if (track == BRANCH_TRACK_EXPLICIT || track == BRANCH_TRACK_OVERRIDE) explicit_tracking = 1; - if ((track == BRANCH_TRACK_OVERRIDE || clobber_head_ok) - ? validate_branchname(name, &ref) - : validate_new_branchname(name, &ref, force)) { - if (!force) - dont_change_ref = 1; - else - forcing = 1; - } - real_ref = NULL; if (get_oid_mb(start_name, &oid)) { if (explicit_tracking) { @@ -407,40 +418,218 @@ void create_branch(struct repository *r, if ((commit = lookup_commit_reference(r, &oid)) == NULL) die(_("not a valid branch point: '%s'"), start_name); - oidcpy(&oid, &commit->object.oid); + if (out_real_ref) { + *out_real_ref = real_ref; + real_ref = NULL; + } + if (out_oid) + oidcpy(out_oid, &commit->object.oid); + + FREE_AND_NULL(real_ref); +} + +void create_branch(struct repository *r, + const char *name, const char *start_name, + int force, int clobber_head_ok, int reflog, + int quiet, enum branch_track track, int dry_run) +{ + struct object_id oid; + char *real_ref; + struct strbuf ref = STRBUF_INIT; + int forcing = 0; + struct ref_transaction *transaction; + struct strbuf err = STRBUF_INIT; + char *msg; + + if (track == BRANCH_TRACK_OVERRIDE) + BUG("'track' cannot be BRANCH_TRACK_OVERRIDE. Did you mean to call dwim_and_setup_tracking()?"); + if (clobber_head_ok && !force) + BUG("'clobber_head_ok' can only be used with 'force'"); + + if (clobber_head_ok ? + validate_branchname(name, &ref) : + validate_new_branchname(name, &ref, force)) { + forcing = 1; + } + + dwim_branch_start(r, start_name, track, &real_ref, &oid); + if (dry_run) + goto cleanup; if (reflog) log_all_ref_updates = LOG_REFS_NORMAL; - if (!dont_change_ref) { - struct ref_transaction *transaction; - struct strbuf err = STRBUF_INIT; - char *msg; - - if (forcing) - msg = xstrfmt("branch: Reset to %s", start_name); - else - msg = xstrfmt("branch: Created from %s", start_name); - - transaction = ref_transaction_begin(&err); - if (!transaction || - ref_transaction_update(transaction, ref.buf, - &oid, forcing ? NULL : null_oid(), - 0, msg, &err) || - ref_transaction_commit(transaction, &err)) - die("%s", err.buf); - ref_transaction_free(transaction); - strbuf_release(&err); - free(msg); - } + if (forcing) + msg = xstrfmt("branch: Reset to %s", start_name); + else + msg = xstrfmt("branch: Created from %s", start_name); + transaction = ref_transaction_begin(&err); + if (!transaction || + ref_transaction_update(transaction, ref.buf, + &oid, forcing ? NULL : null_oid(), + 0, msg, &err) || + ref_transaction_commit(transaction, &err)) + die("%s", err.buf); + ref_transaction_free(transaction); + strbuf_release(&err); + free(msg); if (real_ref && track) setup_tracking(ref.buf + 11, real_ref, track, quiet); +cleanup: strbuf_release(&ref); free(real_ref); } +void dwim_and_setup_tracking(struct repository *r, const char *new_ref, + const char *orig_ref, enum branch_track track, + int quiet) +{ + char *real_orig_ref; + dwim_branch_start(r, orig_ref, track, &real_orig_ref, NULL); + setup_tracking(new_ref, real_orig_ref, track, quiet); +} + +/** + * Creates a branch in a submodule by calling + * create_branches_recursively() in a child process. The child process + * is necessary because install_branch_config_multiple_remotes() (which + * is called by setup_tracking()) does not support writing configs to + * submodules. + */ +static int submodule_create_branch(struct repository *r, + const struct submodule *submodule, + const char *name, const char *start_oid, + const char *tracking_name, int force, + int reflog, int quiet, + enum branch_track track, int dry_run) +{ + int ret = 0; + struct child_process child = CHILD_PROCESS_INIT; + struct strbuf child_err = STRBUF_INIT; + struct strbuf out_buf = STRBUF_INIT; + char *out_prefix = xstrfmt("submodule '%s': ", submodule->name); + child.git_cmd = 1; + child.err = -1; + child.stdout_to_stderr = 1; + + prepare_other_repo_env(&child.env_array, r->gitdir); + /* + * submodule_create_branch() is indirectly invoked by "git + * branch", but we cannot invoke "git branch" in the child + * process. "git branch" accepts a branch name and start point, + * where the start point is assumed to provide both the OID + * (start_oid) and the branch to use for tracking + * (tracking_name). But when recursing through submodules, + * start_oid and tracking name need to be specified separately + * (see create_branches_recursively()). + */ + strvec_pushl(&child.args, "submodule--helper", "create-branch", NULL); + if (dry_run) + strvec_push(&child.args, "--dry-run"); + if (force) + strvec_push(&child.args, "--force"); + if (quiet) + strvec_push(&child.args, "--quiet"); + if (reflog) + strvec_push(&child.args, "--create-reflog"); + if (track == BRANCH_TRACK_ALWAYS || track == BRANCH_TRACK_EXPLICIT) + strvec_push(&child.args, "--track"); + + strvec_pushl(&child.args, name, start_oid, tracking_name, NULL); + + if ((ret = start_command(&child))) + return ret; + ret = finish_command(&child); + strbuf_read(&child_err, child.err, 0); + strbuf_add_lines(&out_buf, out_prefix, child_err.buf, child_err.len); + + if (ret) + fprintf(stderr, "%s", out_buf.buf); + else + printf("%s", out_buf.buf); + + strbuf_release(&child_err); + strbuf_release(&out_buf); + return ret; +} + +void create_branches_recursively(struct repository *r, const char *name, + const char *start_commitish, + const char *tracking_name, int force, + int reflog, int quiet, enum branch_track track, + int dry_run) +{ + int i = 0; + char *branch_point = NULL; + struct object_id super_oid; + struct submodule_entry_list submodule_entry_list; + + /* Perform dwim on start_commitish to get super_oid and branch_point. */ + dwim_branch_start(r, start_commitish, BRANCH_TRACK_NEVER, + &branch_point, &super_oid); + + /* + * If we were not given an explicit name to track, then assume we are at + * the top level and, just like the non-recursive case, the tracking + * name is the branch point. + */ + if (!tracking_name) + tracking_name = branch_point; + + submodules_of_tree(r, &super_oid, &submodule_entry_list); + /* + * Before creating any branches, first check that the branch can + * be created in every submodule. + */ + for (i = 0; i < submodule_entry_list.entry_nr; i++) { + if (submodule_entry_list.entries[i].repo == NULL) { + if (advice_enabled(ADVICE_SUBMODULES_NOT_UPDATED)) + advise(_("You may try updating the submodules using 'git checkout %s && git submodule update --init'"), + start_commitish); + die(_("submodule '%s': unable to find submodule"), + submodule_entry_list.entries[i].submodule->name); + } + + if (submodule_create_branch( + submodule_entry_list.entries[i].repo, + submodule_entry_list.entries[i].submodule, name, + oid_to_hex(&submodule_entry_list.entries[i] + .name_entry->oid), + tracking_name, force, reflog, quiet, track, 1)) + die(_("submodule '%s': cannot create branch '%s'"), + submodule_entry_list.entries[i].submodule->name, + name); + } + + create_branch(the_repository, name, start_commitish, force, 0, reflog, quiet, + BRANCH_TRACK_NEVER, dry_run); + if (dry_run) + return; + /* + * NEEDSWORK If tracking was set up in the superproject but not the + * submodule, users might expect "git branch --recurse-submodules" to + * fail or give a warning, but this is not yet implemented because it is + * tedious to determine whether or not tracking was set up in the + * superproject. + */ + setup_tracking(name, tracking_name, track, quiet); + + for (i = 0; i < submodule_entry_list.entry_nr; i++) { + if (submodule_create_branch( + submodule_entry_list.entries[i].repo, + submodule_entry_list.entries[i].submodule, name, + oid_to_hex(&submodule_entry_list.entries[i] + .name_entry->oid), + tracking_name, force, reflog, quiet, track, 0)) + die(_("submodule '%s': cannot create branch '%s'"), + submodule_entry_list.entries[i].submodule->name, + name); + repo_clear(submodule_entry_list.entries[i].repo); + } +} + void remove_merge_branch_state(struct repository *r) { unlink(git_path_merge_head(r)); @@ -18,6 +18,28 @@ extern enum branch_track git_branch_track; /* Functions for acting on the information about branches. */ +/** + * Sets branch.<new_ref>.{remote,merge} config settings such that + * new_ref tracks orig_ref according to the specified tracking mode. + * + * - new_ref is the name of the branch that we are setting tracking + * for. + * + * - orig_ref is the name of the ref that is 'upstream' of new_ref. + * orig_ref will be expanded with DWIM so that the config settings + * are in the correct format e.g. "refs/remotes/origin/main" instead + * of "origin/main". + * + * - track is the tracking mode e.g. BRANCH_TRACK_REMOTE causes + * new_ref to track orig_ref directly, whereas BRANCH_TRACK_INHERIT + * causes new_ref to track whatever orig_ref tracks. + * + * - quiet suppresses tracking information. + */ +void dwim_and_setup_tracking(struct repository *r, const char *new_ref, + const char *orig_ref, enum branch_track track, + int quiet); + /* * Creates a new branch, where: * @@ -30,8 +52,8 @@ extern enum branch_track git_branch_track; * * - force enables overwriting an existing (non-head) branch * - * - clobber_head_ok allows the currently checked out (hence existing) - * branch to be overwritten; without 'force', it has no effect. + * - clobber_head_ok, when enabled with 'force', allows the currently + * checked out (head) branch to be overwritten * * - reflog creates a reflog for the branch * @@ -40,13 +62,45 @@ extern enum branch_track git_branch_track; * - track causes the new branch to be configured to merge the remote branch * that start_name is a tracking branch for (if any). * + * - dry_run causes the branch to be validated but not created. + * */ void create_branch(struct repository *r, const char *name, const char *start_name, int force, int clobber_head_ok, - int reflog, int quiet, enum branch_track track); + int reflog, int quiet, enum branch_track track, + int dry_run); /* + * Creates a new branch in a repository and its submodules (and its + * submodules, recursively). The parameters are mostly analogous to + * those of create_branch() except for start_name, which is represented + * by two different parameters: + * + * - start_commitish is the commit-ish, in repository r, that determines + * which commits the branches will point to. The superproject branch + * will point to the commit of start_commitish and the submodule + * branches will point to the gitlink commit oids in start_commitish's + * tree. + * + * - tracking_name is the name of the ref, in repository r, that will be + * used to set up tracking information. This value is propagated to + * all submodules, which will evaluate the ref using their own ref + * stores. If NULL, this defaults to start_commitish. + * + * When this function is called on the superproject, start_commitish + * can be any user-provided ref and tracking_name can be NULL (similar + * to create_branches()). But when recursing through submodules, + * start_commitish is the plain gitlink commit oid. Since the oid cannot + * be used for tracking information, tracking_name is propagated and + * used for tracking instead. + */ +void create_branches_recursively(struct repository *r, const char *name, + const char *start_commitish, + const char *tracking_name, int force, + int reflog, int quiet, enum branch_track track, + int dry_run); +/* * Check if 'name' can be a valid name for a branch; die otherwise. * Return 1 if the named branch already exists; return 0 otherwise. * Fill ref with the full refname for the branch. diff --git a/builtin/branch.c b/builtin/branch.c index 4ce2a24754..5d00d0b8d3 100644 --- a/builtin/branch.c +++ b/builtin/branch.c @@ -27,7 +27,8 @@ static const char * const builtin_branch_usage[] = { N_("git branch [<options>] [-r | -a] [--merged] [--no-merged]"), - N_("git branch [<options>] [-l] [-f] <branch-name> [<start-point>]"), + N_("git branch [<options>] [-f] [--recurse-submodules] <branch-name> [<start-point>]"), + N_("git branch [<options>] [-l] [<pattern>...]"), N_("git branch [<options>] [-r] (-d | -D) <branch-name>..."), N_("git branch [<options>] (-m | -M) [<old-branch>] <new-branch>"), N_("git branch [<options>] (-c | -C) [<old-branch>] <new-branch>"), @@ -38,6 +39,8 @@ static const char * const builtin_branch_usage[] = { static const char *head; static struct object_id head_oid; +static int recurse_submodules = 0; +static int submodule_propagate_branches = 0; static int branch_use_color = -1; static char branch_colors[][COLOR_MAXLEN] = { @@ -99,6 +102,15 @@ static int git_branch_config(const char *var, const char *value, void *cb) return config_error_nonbool(var); return color_parse(value, branch_colors[slot]); } + if (!strcmp(var, "submodule.recurse")) { + recurse_submodules = git_config_bool(var, value); + return 0; + } + if (!strcasecmp(var, "submodule.propagateBranches")) { + submodule_propagate_branches = git_config_bool(var, value); + return 0; + } + return git_color_default_config(var, value, cb); } @@ -621,14 +633,16 @@ static int edit_branch_description(const char *branch_name) int cmd_branch(int argc, const char **argv, const char *prefix) { - int delete = 0, rename = 0, copy = 0, force = 0, list = 0; - int show_current = 0; - int reflog = 0, edit_description = 0; - int quiet = 0, unset_upstream = 0; + /* possible actions */ + int delete = 0, rename = 0, copy = 0, list = 0, + unset_upstream = 0, show_current = 0, edit_description = 0; const char *new_upstream = NULL; + int noncreate_actions = 0; + /* possible options */ + int reflog = 0, quiet = 0, icase = 0, force = 0, + recurse_submodules_explicit = 0; enum branch_track track; struct ref_filter filter; - int icase = 0; static struct ref_sorting *sorting; struct string_list sorting_options = STRING_LIST_INIT_DUP; struct ref_format format = REF_FORMAT_INIT; @@ -677,6 +691,7 @@ int cmd_branch(int argc, const char **argv, const char *prefix) OPT_CALLBACK(0, "points-at", &filter.points_at, N_("object"), N_("print only branches of the object"), parse_opt_object_name), OPT_BOOL('i', "ignore-case", &icase, N_("sorting and filtering are case insensitive")), + OPT_BOOL(0, "recurse-submodules", &recurse_submodules_explicit, N_("recurse through submodules")), OPT_STRING( 0 , "format", &format.format, N_("format"), N_("format to use for the output")), OPT_END(), }; @@ -713,10 +728,23 @@ int cmd_branch(int argc, const char **argv, const char *prefix) filter.reachable_from || filter.unreachable_from || filter.points_at.nr) list = 1; - if (!!delete + !!rename + !!copy + !!new_upstream + !!show_current + - list + edit_description + unset_upstream > 1) + noncreate_actions = !!delete + !!rename + !!copy + !!new_upstream + + !!show_current + !!list + !!edit_description + + !!unset_upstream; + if (noncreate_actions > 1) usage_with_options(builtin_branch_usage, options); + if (recurse_submodules_explicit) { + if (!submodule_propagate_branches) + die(_("branch with --recurse-submodules can only be used if submodule.propagateBranches is enabled")); + if (noncreate_actions) + die(_("--recurse-submodules can only be used to create branches")); + } + + recurse_submodules = + (recurse_submodules || recurse_submodules_explicit) && + submodule_propagate_branches; + if (filter.abbrev == -1) filter.abbrev = DEFAULT_ABBREV; filter.ignore_case = icase; @@ -828,12 +856,9 @@ int cmd_branch(int argc, const char **argv, const char *prefix) if (!ref_exists(branch->refname)) die(_("branch '%s' does not exist"), branch->name); - /* - * create_branch takes care of setting up the tracking - * info and making sure new_upstream is correct - */ - create_branch(the_repository, branch->name, new_upstream, - 0, 0, 0, quiet, BRANCH_TRACK_OVERRIDE); + dwim_and_setup_tracking(the_repository, branch->name, + new_upstream, BRANCH_TRACK_OVERRIDE, + quiet); } else if (unset_upstream) { struct branch *branch = branch_get(argv[0]); struct strbuf buf = STRBUF_INIT; @@ -857,7 +882,10 @@ int cmd_branch(int argc, const char **argv, const char *prefix) strbuf_addf(&buf, "branch.%s.merge", branch->name); git_config_set_multivar(buf.buf, NULL, NULL, CONFIG_FLAGS_MULTI_REPLACE); strbuf_release(&buf); - } else if (argc > 0 && argc <= 2) { + } else if (!noncreate_actions && argc > 0 && argc <= 2) { + const char *branch_name = argv[0]; + const char *start_name = argc == 2 ? argv[1] : head; + if (filter.kind != FILTER_REFS_BRANCHES) die(_("The -a, and -r, options to 'git branch' do not take a branch name.\n" "Did you mean to use: -a|-r --list <pattern>?")); @@ -865,10 +893,14 @@ int cmd_branch(int argc, const char **argv, const char *prefix) if (track == BRANCH_TRACK_OVERRIDE) die(_("the '--set-upstream' option is no longer supported. Please use '--track' or '--set-upstream-to' instead.")); - create_branch(the_repository, - argv[0], (argc == 2) ? argv[1] : head, - force, 0, reflog, quiet, track); - + if (recurse_submodules) { + create_branches_recursively(the_repository, branch_name, + start_name, NULL, force, + reflog, quiet, track, 0); + return 0; + } + create_branch(the_repository, branch_name, start_name, force, 0, + reflog, quiet, track, 0); } else usage_with_options(builtin_branch_usage, options); diff --git a/builtin/checkout.c b/builtin/checkout.c index f6e65fedfa..2b33960e21 100644 --- a/builtin/checkout.c +++ b/builtin/checkout.c @@ -909,7 +909,8 @@ static void update_refs_for_switch(const struct checkout_opts *opts, opts->new_branch_force ? 1 : 0, opts->new_branch_log, opts->quiet, - opts->track); + opts->track, + 0); free(new_branch_info->name); free(new_branch_info->refname); new_branch_info->name = xstrdup(opts->new_branch); diff --git a/builtin/submodule--helper.c b/builtin/submodule--helper.c index c5d3fc3817..33c82c3ab9 100644 --- a/builtin/submodule--helper.c +++ b/builtin/submodule--helper.c @@ -20,6 +20,7 @@ #include "diff.h" #include "object-store.h" #include "advice.h" +#include "branch.h" #define OPT_QUIET (1 << 0) #define OPT_CACHED (1 << 1) @@ -2984,6 +2985,42 @@ static int module_set_branch(int argc, const char **argv, const char *prefix) return !!ret; } +static int module_create_branch(int argc, const char **argv, const char *prefix) +{ + enum branch_track track; + int quiet = 0, force = 0, reflog = 0, dry_run = 0; + + struct option options[] = { + OPT__QUIET(&quiet, N_("print only error messages")), + OPT__FORCE(&force, N_("force creation"), 0), + OPT_BOOL(0, "create-reflog", &reflog, + N_("create the branch's reflog")), + OPT_SET_INT('t', "track", &track, + N_("set up tracking mode (see git-pull(1))"), + BRANCH_TRACK_EXPLICIT), + OPT__DRY_RUN(&dry_run, + N_("show whether the branch would be created")), + OPT_END() + }; + const char *const usage[] = { + N_("git submodule--helper create-branch [-f|--force] [--create-reflog] [-q|--quiet] [-t|--track] [-n|--dry-run] <name> <start_oid> <start_name>"), + NULL + }; + + git_config(git_default_config, NULL); + track = git_branch_track; + argc = parse_options(argc, argv, prefix, options, usage, 0); + + if (argc != 3) + usage_with_options(usage, options); + + if (!quiet && !dry_run) + printf_ln(_("creating branch '%s'"), argv[0]); + + create_branches_recursively(the_repository, argv[0], argv[1], argv[2], + force, reflog, quiet, track, dry_run); + return 0; +} struct add_data { const char *prefix; const char *branch; @@ -3390,6 +3427,7 @@ static struct cmd_struct commands[] = { {"config", module_config, 0}, {"set-url", module_set_url, 0}, {"set-branch", module_set_branch, 0}, + {"create-branch", module_create_branch, 0}, }; int cmd_submodule__helper(int argc, const char **argv, const char *prefix) diff --git a/submodule-config.c b/submodule-config.c index f95344028b..c9f54bc72d 100644 --- a/submodule-config.c +++ b/submodule-config.c @@ -7,6 +7,7 @@ #include "strbuf.h" #include "object-store.h" #include "parse-options.h" +#include "tree-walk.h" /* * submodule cache lookup structure @@ -726,6 +727,66 @@ const struct submodule *submodule_from_path(struct repository *r, return config_from(r->submodule_cache, treeish_name, path, lookup_path); } +/** + * Used internally by submodules_of_tree(). Recurses into 'treeish_name' + * and appends submodule entries to 'out'. The submodule_cache expects + * a root-level treeish_name and paths, so keep track of these values + * with 'root_tree' and 'prefix'. + */ +static void traverse_tree_submodules(struct repository *r, + const struct object_id *root_tree, + char *prefix, + const struct object_id *treeish_name, + struct submodule_entry_list *out) +{ + struct tree_desc tree; + struct submodule_tree_entry *st_entry; + struct name_entry *name_entry; + char *tree_path = NULL; + + name_entry = xmalloc(sizeof(*name_entry)); + + fill_tree_descriptor(r, &tree, treeish_name); + while (tree_entry(&tree, name_entry)) { + if (prefix) + tree_path = + mkpathdup("%s/%s", prefix, name_entry->path); + else + tree_path = xstrdup(name_entry->path); + + if (S_ISGITLINK(name_entry->mode) && + is_tree_submodule_active(r, root_tree, tree_path)) { + st_entry = xmalloc(sizeof(*st_entry)); + st_entry->name_entry = xmalloc(sizeof(*st_entry->name_entry)); + *st_entry->name_entry = *name_entry; + st_entry->submodule = + submodule_from_path(r, root_tree, tree_path); + st_entry->repo = xmalloc(sizeof(*st_entry->repo)); + if (repo_submodule_init(st_entry->repo, r, tree_path, + root_tree)) + FREE_AND_NULL(st_entry->repo); + + ALLOC_GROW(out->entries, out->entry_nr + 1, + out->entry_alloc); + out->entries[out->entry_nr++] = *st_entry; + } else if (S_ISDIR(name_entry->mode)) + traverse_tree_submodules(r, root_tree, tree_path, + &name_entry->oid, out); + free(tree_path); + } +} + +void submodules_of_tree(struct repository *r, + const struct object_id *treeish_name, + struct submodule_entry_list *out) +{ + CALLOC_ARRAY(out->entries, 0); + out->entry_nr = 0; + out->entry_alloc = 0; + + traverse_tree_submodules(r, treeish_name, NULL, treeish_name, out); +} + void submodule_free(struct repository *r) { if (r->submodule_cache) diff --git a/submodule-config.h b/submodule-config.h index 65875b94ea..fa229a8b97 100644 --- a/submodule-config.h +++ b/submodule-config.h @@ -6,6 +6,7 @@ #include "hashmap.h" #include "submodule.h" #include "strbuf.h" +#include "tree-walk.h" /** * The submodule config cache API allows to read submodule @@ -101,4 +102,37 @@ int check_submodule_name(const char *name); void fetch_config_from_gitmodules(int *max_children, int *recurse_submodules); void update_clone_config_from_gitmodules(int *max_jobs); +/* + * Submodule entry that contains relevant information about a + * submodule in a tree. + */ +struct submodule_tree_entry { + /* The submodule's tree entry. */ + struct name_entry *name_entry; + /* + * A struct repository corresponding to the submodule. May be + * NULL if the submodule has not been updated. + */ + struct repository *repo; + /* + * A struct submodule containing the submodule config in the + * tree's .gitmodules. + */ + const struct submodule *submodule; +}; + +struct submodule_entry_list { + struct submodule_tree_entry *entries; + int entry_nr; + int entry_alloc; +}; + +/** + * Given a treeish, return all submodules in the tree and its subtrees, + * but excluding nested submodules. Callers that require nested + * submodules are expected to recurse into the submodules themselves. + */ +void submodules_of_tree(struct repository *r, + const struct object_id *treeish_name, + struct submodule_entry_list *ret); #endif /* SUBMODULE_CONFIG_H */ diff --git a/submodule.c b/submodule.c index c689070524..5ace18a7d9 100644 --- a/submodule.c +++ b/submodule.c @@ -267,7 +267,9 @@ int option_parse_recurse_submodules_worktree_updater(const struct option *opt, * ie, the config looks like: "[submodule] active\n". * Since that is an invalid pathspec, we should inform the user. */ -int is_submodule_active(struct repository *repo, const char *path) +int is_tree_submodule_active(struct repository *repo, + const struct object_id *treeish_name, + const char *path) { int ret = 0; char *key = NULL; @@ -275,7 +277,7 @@ int is_submodule_active(struct repository *repo, const char *path) const struct string_list *sl; const struct submodule *module; - module = submodule_from_path(repo, null_oid(), path); + module = submodule_from_path(repo, treeish_name, path); /* early return if there isn't a path->module mapping */ if (!module) @@ -317,6 +319,11 @@ int is_submodule_active(struct repository *repo, const char *path) return ret; } +int is_submodule_active(struct repository *repo, const char *path) +{ + return is_tree_submodule_active(repo, null_oid(), path); +} + int is_submodule_populated_gently(const char *path, int *return_error_code) { int ret = 0; diff --git a/submodule.h b/submodule.h index 6bd2c99fd9..784ceffc0e 100644 --- a/submodule.h +++ b/submodule.h @@ -54,6 +54,9 @@ int git_default_submodule_config(const char *var, const char *value, void *cb); struct option; int option_parse_recurse_submodules_worktree_updater(const struct option *opt, const char *arg, int unset); +int is_tree_submodule_active(struct repository *repo, + const struct object_id *treeish_name, + const char *path); int is_submodule_active(struct repository *repo, const char *path); /* * Determine if a submodule has been populated at a given 'path' by checking if diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 1bc3795847..7a0ff75ba8 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -42,6 +42,23 @@ test_expect_success 'git branch abc should create a branch' ' git branch abc && test_path_is_file .git/refs/heads/abc ' +test_expect_success 'git branch abc should fail when abc exists' ' + test_must_fail git branch abc +' + +test_expect_success 'git branch --force abc should fail when abc is checked out' ' + test_when_finished git switch main && + git switch abc && + test_must_fail git branch --force abc HEAD~1 +' + +test_expect_success 'git branch --force abc should succeed when abc exists' ' + git rev-parse HEAD~1 >expect && + git branch --force abc HEAD~1 && + git rev-parse abc >actual && + test_cmp expect actual +' + test_expect_success 'git branch a/b/c should create a branch' ' git branch a/b/c && test_path_is_file .git/refs/heads/a/b/c ' diff --git a/t/t3207-branch-submodule.sh b/t/t3207-branch-submodule.sh new file mode 100755 index 0000000000..0d93f7516c --- /dev/null +++ b/t/t3207-branch-submodule.sh @@ -0,0 +1,292 @@ +#!/bin/sh + +test_description='git branch submodule tests' + +GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main +export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +pwd=$(pwd) + +# Creates a clean test environment in "pwd" by copying the repo setup +# from test_dirs. +reset_test () { + rm -fr super && + rm -fr sub-sub-upstream && + rm -fr sub-upstream && + cp -r test_dirs/* . +} + +# Tests that the expected branch does not exist +test_no_branch () { + DIR=$1 && + BRANCH_NAME=$2 && + test_must_fail git -C "$DIR" rev-parse "$BRANCH_NAME" 2>err && + grep "ambiguous argument .$BRANCH_NAME." err +} + +test_expect_success 'setup superproject and submodule' ' + mkdir test_dirs && + ( + cd test_dirs && + git init super && + test_commit -C super foo && + git init sub-sub-upstream && + test_commit -C sub-sub-upstream foo && + git init sub-upstream && + # Submodule in a submodule + git -C sub-upstream submodule add "${pwd}/test_dirs/sub-sub-upstream" sub-sub && + git -C sub-upstream commit -m "add submodule" && + # Regular submodule + git -C super submodule add "${pwd}/test_dirs/sub-upstream" sub && + # Submodule in a subdirectory + git -C super submodule add "${pwd}/test_dirs/sub-sub-upstream" second/sub && + git -C super commit -m "add submodule" && + git -C super config submodule.propagateBranches true && + git -C super/sub submodule update --init + ) && + reset_test +' + +# Test the argument parsing +test_expect_success '--recurse-submodules should create branches' ' + test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a && + git rev-parse branch-a && + git -C sub rev-parse branch-a && + git -C sub/sub-sub rev-parse branch-a && + git -C second/sub rev-parse branch-a + ) +' + +test_expect_success '--recurse-submodules should die if submodule.propagateBranches is false' ' + test_when_finished "reset_test" && + ( + cd super && + echo "fatal: branch with --recurse-submodules can only be used if submodule.propagateBranches is enabled" >expected && + test_must_fail git -c submodule.propagateBranches=false branch --recurse-submodules branch-a 2>actual && + test_cmp expected actual + ) +' + +test_expect_success '--recurse-submodules should fail when not creating branches' ' + test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a && + echo "fatal: --recurse-submodules can only be used to create branches" >expected && + test_must_fail git branch --recurse-submodules -D branch-a 2>actual && + test_cmp expected actual && + # Assert that the branches were not deleted + git rev-parse branch-a && + git -C sub rev-parse branch-a + ) +' + +test_expect_success 'should respect submodule.recurse when creating branches' ' + test_when_finished "reset_test" && + ( + cd super && + git -c submodule.recurse=true branch branch-a && + git rev-parse branch-a && + git -C sub rev-parse branch-a + ) +' + +test_expect_success 'should ignore submodule.recurse when not creating branches' ' + test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a && + git -c submodule.recurse=true branch -D branch-a && + test_no_branch . branch-a && + git -C sub rev-parse branch-a + ) +' + +# Test branch creation behavior +test_expect_success 'should create branches based off commit id in superproject' ' + test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a && + git checkout --recurse-submodules branch-a && + git -C sub rev-parse HEAD >expected && + # Move the tip of sub:branch-a so that it no longer matches the commit in super:branch-a + git -C sub checkout branch-a && + test_commit -C sub bar && + # Create a new branch-b branch with start-point=branch-a + git branch --recurse-submodules branch-b branch-a && + git rev-parse branch-b && + git -C sub rev-parse branch-b >actual && + # Assert that the commit id of sub:second-branch matches super:branch-a and not sub:branch-a + test_cmp expected actual + ) +' + +test_expect_success 'should not create any branches if branch is not valid for all repos' ' + test_when_finished "reset_test" && + ( + cd super && + git -C sub branch branch-a && + test_must_fail git branch --recurse-submodules branch-a 2>actual && + test_no_branch . branch-a && + grep "submodule .sub.: fatal: a branch named .branch-a. already exists" actual + ) +' + +test_expect_success 'should create branches if branch exists and --force is given' ' + test_when_finished "reset_test" && + ( + cd super && + git -C sub rev-parse HEAD >expected && + test_commit -C sub baz && + # branch-a in sub now points to a newer commit. + git -C sub branch branch-a HEAD && + git -C sub rev-parse branch-a >actual-old-branch-a && + git branch --recurse-submodules --force branch-a && + git rev-parse branch-a && + git -C sub rev-parse branch-a >actual-new-branch-a && + test_cmp expected actual-new-branch-a && + # assert that branch --force actually moved the sub + # branch + ! test_cmp expected actual-old-branch-a + ) +' + +test_expect_success 'should create branch when submodule is not in HEAD:.gitmodules' ' + test_when_finished "reset_test" && + ( + cd super && + git branch branch-a && + git checkout -b branch-b && + git submodule add ../sub-upstream sub2 && + git -C sub2 submodule update --init && + # branch-b now has a committed submodule not in branch-a + git commit -m "add second submodule" && + git checkout branch-a && + git branch --recurse-submodules branch-c branch-b && + git checkout --recurse-submodules branch-c && + git -C sub2 rev-parse branch-c && + git -C sub2/sub-sub rev-parse branch-c + ) +' + +test_expect_success 'should not create branches in inactive submodules' ' + test_when_finished "reset_test" && + test_config -C super submodule.sub.active false && + ( + cd super && + git branch --recurse-submodules branch-a && + git rev-parse branch-a && + test_no_branch sub branch-a + ) +' + +test_expect_success 'should set up tracking of local branches with track=always' ' + test_when_finished "reset_test" && + ( + cd super && + git -c branch.autoSetupMerge=always branch --recurse-submodules branch-a main && + git -C sub rev-parse main && + test_cmp_config -C sub . branch.branch-a.remote && + test_cmp_config -C sub refs/heads/main branch.branch-a.merge + ) +' + +test_expect_success 'should set up tracking of local branches with explicit track' ' + test_when_finished "reset_test" && + ( + cd super && + git branch --track --recurse-submodules branch-a main && + git -C sub rev-parse main && + test_cmp_config -C sub . branch.branch-a.remote && + test_cmp_config -C sub refs/heads/main branch.branch-a.merge + ) +' + +test_expect_success 'should not set up unnecessary tracking of local branches' ' + test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a main && + git -C sub rev-parse main && + test_cmp_config -C sub "" --default "" branch.branch-a.remote && + test_cmp_config -C sub "" --default "" branch.branch-a.merge + ) +' + +reset_remote_test () { + rm -fr super-clone && + reset_test +} + +test_expect_success 'setup tests with remotes' ' + ( + cd test_dirs && + ( + cd super && + git branch branch-a && + git checkout -b branch-b && + git submodule add ../sub-upstream sub2 && + # branch-b now has a committed submodule not in branch-a + git commit -m "add second submodule" + ) && + git clone --branch main --recurse-submodules super super-clone && + git -C super-clone config submodule.propagateBranches true + ) && + reset_remote_test +' + +test_expect_success 'should get fatal error upon branch creation when submodule is not in .git/modules' ' + test_when_finished "reset_remote_test" && + ( + cd super-clone && + # This should succeed because super-clone has sub in .git/modules + git branch --recurse-submodules branch-a origin/branch-a && + # This should fail because super-clone does not have sub2 .git/modules + test_must_fail git branch --recurse-submodules branch-b origin/branch-b 2>actual && + grep "fatal: submodule .sub2.: unable to find submodule" actual && + test_no_branch . branch-b && + test_no_branch sub branch-b && + # User can fix themselves by initializing the submodule + git checkout origin/branch-b && + git submodule update --init --recursive && + git branch --recurse-submodules branch-b origin/branch-b + ) +' + +test_expect_success 'should set up tracking of remote-tracking branches' ' + test_when_finished "reset_remote_test" && + ( + cd super-clone && + git branch --recurse-submodules branch-a origin/branch-a && + test_cmp_config origin branch.branch-a.remote && + test_cmp_config refs/heads/branch-a branch.branch-a.merge && + # "origin/branch-a" does not exist for "sub", but it matches the refspec + # so tracking should be set up + test_cmp_config -C sub origin branch.branch-a.remote && + test_cmp_config -C sub refs/heads/branch-a branch.branch-a.merge && + test_cmp_config -C sub/sub-sub origin branch.branch-a.remote && + test_cmp_config -C sub/sub-sub refs/heads/branch-a branch.branch-a.merge + ) +' + +test_expect_success 'should not fail when unable to set up tracking in submodule' ' + test_when_finished "reset_remote_test" && + ( + cd super-clone && + git remote rename origin ex-origin && + git branch --recurse-submodules branch-a ex-origin/branch-a && + test_cmp_config ex-origin branch.branch-a.remote && + test_cmp_config refs/heads/branch-a branch.branch-a.merge && + test_cmp_config -C sub "" --default "" branch.branch-a.remote && + test_cmp_config -C sub "" --default "" branch.branch-a.merge + ) +' + +test_done |