diff options
124 files changed, 3013 insertions, 768 deletions
diff --git a/Documentation/RelNotes-1.7.1.1.txt b/Documentation/RelNotes-1.7.1.1.txt new file mode 100644 index 0000000000..e0386a43f0 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.1.txt @@ -0,0 +1,67 @@ +Git v1.7.1.1 Release Notes (draft) +================================== + +Fixes since v1.7.1 +------------------ + + * Authentication over http transport can now be made lazily, in that the + request can first go to a URL without username, get a 401 response and + then the client will ask for the username to use. + + * We used to mistakenly think "../work" is a subdirectory of the current + directory when we are in "../work-xyz". + + * The attribute mechanism now allows an entry that uses an attribute + macro that set/unset one attribute, immediately followed by an + overriding setting; this makes attribute macros much easier to use. + + * We didn't recognize timezone "Z" as a synonym for "UTC" (75b37e70). + + * "git am -3" did not show diagnosis when the patch in the message was corrupt. + + * After "git apply --whitespace=fix" removed trailing blank lines in an + patch in a patch series, it failed to apply later patches that depend + on the presense of such blank lines. + + * "git bundle --stdin" segfaulted. + + * "git checkout" and "git rebase" overwrote paths that are marked "assume + unchanged". + + * "git describe" did not tie-break tags that point at the same commit + correctly; newer ones are preferred by paying attention to the + tagger date now. + + * "git diff" used to tell underlying xdiff machinery to work very hard to + minimize the output, but this often was spending too many extra cycles + for very little gain. + + * "git diff --color" did not paint extended diff headers per line + (i.e. the coloring escape sequence didn't end at the end of line), + which confused "less -R". + + * "git fetch" over HTTP verifies the downloaded packfiles more robustly. + + * The memory usage by "git index-pack" (run during "git fetch" and "git + push") got leaner. + + * "GIT_DIR=foo.git git init --bare bar.git" created foo.git instead of bar.git. + + * "git log --abbrev=$num --format='%h' ignored --abbrev=$num. + + * "git pull" accepted "--dry-run", gave it to underlying "git fetch" but + ignored the option itself, resulting in a bogus attempt to merge + unrelated commit. + + * "git send-email" lacked a way to specify the domainname used in the + EHLO/HELO exchange, causing rejected connection from picky servers. + It learned --smtp-domain option to solve this issue. + + * "git stash" incorrectly lost paths in the working tree that were + previously removed from the index. + + * "git status" stopped refreshing the index by mistake in 1.7.1. + + * "git status" showed excess "hints" even when advice.statusHints is set to false. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.2.txt b/Documentation/RelNotes-1.7.2.txt index 37781b4f14..a1b5428df4 100644 --- a/Documentation/RelNotes-1.7.2.txt +++ b/Documentation/RelNotes-1.7.2.txt @@ -4,37 +4,112 @@ Git v1.7.2 Release Notes (draft) Updates since v1.7.1 -------------------- - * After "git apply --whitespace=fix" removed trailing blank lines in an - patch in a patch series, it failed to apply later patches that depend - on the presense of such blank lines. + * The whitespace rules used in "git apply --whitespace" and "git diff" + gained a new member in the family (tab-in-indent) to help projects with + policy to indent only with spaces. + + * When working from a subdirectory, by default, git does not look for its + metadirectory ".git" across filesystems, primarily to help people who + have invocations of git in their custom PS1 prompts, as being outside + of a git repository would look for ".git" all the way up to the root + directory, and NFS mounts are often slow. DISCOVERY_ACROSS_FILESYSTEM + environment variable can be used to tell git not to stop at a + filesystem boundary. + + * "git" wrapper learned "-c name=value" option to override configuration + variable from the command line. + + * The message from "git am -3" has been improved when conflict + resolution ended up making the patch a no-op. + + * "git checkout --orphan newbranch" is similar to "-b newbranch" but + prepares to create a root commit that is not connected to any existing + commit. + + * "git commit --amend" on a commit with an invalid author-name line that + lacks the display name didn't work (fb7749e4). + + * "git cvsserver" can be told to use pserver; its password file can be + stored outside the repository. * The output from the textconv filter used by "git diff" can be cached to speed up their reuse. - * "git send-email" learned --smtp-domain option to specify the domainname - used in the EHLO/HELO exchange. + * "git diff --word-diff=<mode>" extends the existing "--color-words" + option, making it more useful in color-challenged environments. + + * The regexp to detect function headers used by "git diff" for PHP has + been enhanced for visibility modifiers (public, protected, etc.) to + better support PHP5. + + * "diff.noprefix" configuration variable can be used to implicitly + ask for "diff --no-prefix" behaviour. + + * "git for-each-ref" learned "%(objectname:short)" that gives the object + name abbreviated. + + * Various options to "git grep" (e.g. --count, --name-only) work better + with binary files. + + * "git help -w" learned "chrome" and "chromium" browsers. + + * "git log --follow <path>" follows across copies (it used to only follow + renames). This may make the processing more expensive. + + * "git ls-files ../out/side/cwd" works now. + + * "git notes prune" learned "-n" (dry-run) and "-v" options, similar to + what "git prune" has. + + * "git patch-id" can be fed a mbox without getting confused by the + signature line in the format-patch output. + + * "git remote" learned "set-branches" subcommand. * "git revert" learned --strategy option to specify the merge strategy. - * The whitespace rules used in "git apply --whitespace" and "git diff" - gained a new member in the family (tab-in-indent) to help projects with - policy to indent only with spaces. + * "git status [-s] --ignored" can be used to list ignored paths. - * Authentication over http transport can now be made lazily, in that the - request can first go to a URL without username, get a 401 response and - then the client will ask for the username to use. + * "git status -s -b" shows the current branch in the output. + + * Various "gitweb" enhancements and clean-ups, including syntax + highlighting, "plackup" support for instaweb, etc. Fixes since v1.7.1 ------------------ - * In 1.7.1, "git status" stopped refreshing the index by mistake. - All of the fixes in v1.7.1.X maintenance series are included in this release, unless otherwise noted. + * We didn't URL decode "file:///path/to/repo" correctly when path/to/repo + had percent-encoded characters (638794c, 9d2e942). + + * "git clone/fetch/pull" issued an incorrect error message when a ref and + a symref that points to the ref were updated at the same time. This + obviously would update them to the same value, and should not result in + an error condition (7223dcaf). + + * "git clone" did not configure remote.origin.url correctly for bare + clones (df61c889). + + * "git diff --graph" works better with "--color-words" and other options + (81fa024..4297c0a). + + * "git diff" could show ambiguous abbreviation of blob object names on + its "index" line (3e5a188). + + * "git merge --log" used to replace the custom message given by "-m" with + the shortlog, instead of appending to it (tc/merge-m-log). + + * "git reset --hard" started from a wrong directory and a working tree in + a nonstandard location is in use got confused (560fb6a1). + + * "git show -C -C" and other corner cases lost diff metainfo output + in 1.7.0 (296c6bb). + -- exec >/var/tmp/1 -O=v1.7.1-77-gb751157 -echo O=$(git describe master) -git shortlog --no-merges master ^maint ^$O +O=v1.7.1-423-gae391ec +echo O=$(git describe HEAD) +git shortlog --no-merges HEAD ^maint ^$O diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 8db22efbaf..eb53e0636e 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -41,6 +41,7 @@ Checklist (and a short version for the impatient): maintainer (gitster@pobox.com) if (and only if) the patch is ready for inclusion. If you use git-send-email(1), please test it first by sending email to yourself. + - see below for instructions specific to your mailer Long version: @@ -546,9 +547,27 @@ Gmail GMail does not appear to have any way to turn off line wrapping in the web interface, so this will mangle any emails that you send. You can however -use any IMAP email client to connect to the google imap server, and forward +use "git send-email" and send your patches through the GMail SMTP server, or +use any IMAP email client to connect to the google IMAP server and forward the emails through that. +To use "git send-email" and send your patches through the GMail SMTP server, +edit ~/.gitconfig to specify your account settings: + +[sendemail] + smtpencryption = tls + smtpserver = smtp.gmail.com + smtpuser = user@gmail.com + smtppass = p4ssw0rd + smtpserverport = 587 + +Once your commits are ready to be sent to the mailing list, run the +following commands: + + $ git format-patch --cover-letter -M origin/master -o outgoing/ + $ edit outgoing/0000-* + $ git send-email outgoing/* + To submit using the IMAP interface, first, edit your ~/.gitconfig to specify your account settings: @@ -564,8 +583,7 @@ You might need to instead use: folder = "[Google Mail]/Drafts" if you get an err that the "Folder doesn't exist". Once your commits are ready to be sent to the mailing list, run the -following command to send the patch emails to your Gmail Drafts -folder. +following commands: $ git format-patch --cover-letter -M --stdout origin/master | git imap-send @@ -573,19 +591,3 @@ Just make sure to disable line wrapping in the email client (GMail web interface will line wrap no matter what, so you need to use a real IMAP client). -Alternatively, you can use "git send-email" and send your patches -through the GMail SMTP server. edit ~/.gitconfig to specify your -account settings: - -[sendemail] - smtpencryption = tls - smtpserver = smtp.gmail.com - smtpuser = user@gmail.com - smtppass = p4ssw0rd - smtpserverport = 587 - -Once your commits are ready to be sent to the mailing list, run the -following commands: - - $ git format-patch --cover-letter -M origin/master -o outgoing/ - $ git send-email outgoing/* diff --git a/Documentation/config.txt b/Documentation/config.txt index 87f397ed96..7afd0a333f 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -520,18 +520,12 @@ check that makes sure that existing object files will not get overwritten. core.notesRef:: When showing commit messages, also show notes which are stored in - the given ref. This ref is expected to contain files named - after the full SHA-1 of the commit they annotate. The ref - must be fully qualified. + the given ref. The ref must be fully qualified. If the given + ref does not exist, it is not an error but means that no + notes should be printed. + -If such a file exists in the given ref, the referenced blob is read, and -appended to the commit message, separated by a "Notes (<refname>):" -line (shortened to "Notes:" in the case of "refs/notes/commits"). If the -given ref itself does not exist, it is not an error, but means that no -notes should be printed. -+ -This setting defaults to "refs/notes/commits", and can be overridden by -the `GIT_NOTES_REF` environment variable. +This setting defaults to "refs/notes/commits", and it can be overridden by +the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in @@ -798,6 +792,8 @@ diff.mnemonicprefix:: standard "a/" and "b/" depending on what is being compared. When this configuration is in effect, reverse diff output also swaps the order of the prefixes: +diff.noprefix:: + If set, 'git diff' does not show any source or destination prefix. `git diff`;; compares the (i)ndex and the (w)ork tree; `git diff HEAD`;; @@ -1481,6 +1477,16 @@ pager.<cmd>:: it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. +pretty.<name>:: + Alias for a --pretty= format string, as specified in + linkgit:git-log[1]. Any aliases defined here can be used just + as the built-in pretty formats could. For example, + running `git config pretty.changelog "format:{asterisk} %H %s"` + would cause the invocation `git log --pretty=changelog` + to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + Note that an alias with the same name as a built-in format + will be silently ignored. + pull.octopus:: The default merge strategy to use when pulling multiple branches at once. @@ -1699,6 +1705,13 @@ If this variable is not specified, it defaults to 'normal'. This variable can be overridden with the -u|--untracked-files option of linkgit:git-status[1] and linkgit:git-commit[1]. +status.submodulesummary:: + Defaults to false. + If this is set to a non zero number or true (identical to -1 or an + unlimited number), the submodule summary will be enabled and a + summary of commits for modified submodules will be shown (see + --summary-limit option of linkgit:git-submodule[1]). + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 0d89aaaf2a..e745a3ccdc 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -210,7 +210,14 @@ endif::git-format-patch[] Break complete rewrite changes into pairs of delete and create. -M:: +ifndef::git-log[] Detect renames. +endif::git-log[] +ifdef::git-log[] + If generating diffs, detect and report renames for each commit. + For following files across renames while traversing history, see + `--follow`. +endif::git-log[] -C:: Detect copies as well as renames. See also `--find-copies-harder`. diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 51cbeb7032..74741a42f4 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -266,9 +266,9 @@ patch:: y - stage this hunk n - do not stage this hunk - q - quit, do not stage this hunk nor any of the remaining ones - a - stage this and all the remaining hunks in the file - d - do not stage this hunk nor any of the remaining hunks in the file + q - quit; do not stage this hunk nor any of the remaining ones + a - stage this hunk and all later hunks in the file + d - do not stage this hunk nor any of the later hunks in the file g - select a hunk to go to / - search for a hunk matching the given regex j - leave this hunk undecided, see next undecided hunk diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index b84ec26276..1548312b35 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -161,6 +161,10 @@ edits from your current working tree. As a special case, the `"@\{-N\}"` syntax for the N-th last branch checks out the branch (instead of detaching). You may also specify `-` which is synonymous with `"@\{-1\}"`. ++ +As a further special case, you may use `"A...B"` as a shortcut for the +merge base of `A` and `B` if there is exactly one merge base. You can +leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. <new_branch>:: Name for the new branch. diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 32c482f33f..c28603ecf5 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -95,10 +95,11 @@ OPTIONS read the message from the standard input. --author=<author>:: - Override the author name used in the commit. You can use the - standard `A U Thor <author@example.com>` format. Otherwise, - an existing commit that matches the given string and its author - name is used. + Override the commit author. Specify an explicit author using the + standard `A U Thor <author@example.com>` format. Otherwise <author> + is assumed to be a pattern and is used to search for an existing + commit by that author (i.e. rev-list --all -i --author=<author>); + the commit author is then copied from the first such commit found. --date=<date>:: Override the author date used in the commit. diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index dbb053ee17..c27ca4350e 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -72,9 +72,6 @@ plugin. Most functionality works fine with both of these clients. LIMITATIONS ----------- -Currently cvsserver works over SSH connections for read/write clients, and -over pserver for anonymous CVS access. - CVS clients cannot tag, branch or perform GIT merges. 'git-cvsserver' maps GIT branches to CVS modules. This is very different @@ -84,7 +81,7 @@ one or more directories. INSTALLATION ------------ -1. If you are going to offer anonymous CVS access via pserver, add a line in +1. If you are going to offer CVS access via pserver, add a line in /etc/inetd.conf like + -- @@ -101,6 +98,38 @@ looks like cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver ------ + +Only anonymous access is provided by pserve by default. To commit you +will have to create pserver accounts, simply add a gitcvs.authdb +setting in the config file of the repositories you want the cvsserver +to allow writes to, for example: + +------ + + [gitcvs] + authdb = /etc/cvsserver/passwd + +------ +The format of these files is username followed by the crypted password, +for example: + +------ + myuser:$1Oyx5r9mdGZ2 + myuser:$1$BA)@$vbnMJMDym7tA32AamXrm./ +------ +You can use the 'htpasswd' facility that comes with Apache to make these +files, but Apache's MD5 crypt method differs from the one used by most C +library's crypt() function, so don't use the -m option. + +Alternatively you can produce the password with perl's crypt() operator: +----- + perl -e 'my ($user, $pass) = @ARGV; printf "%s:%s\n", $user, crypt($user, $pass)' $USER password +----- + +Then provide your password via the pserver method, for example: +------ + cvs -d:pserver:someuser:somepassword <at> server/path/repo.git co <HEAD_name> +------ No special setup is needed for SSH access, other than having GIT tools in the PATH. If you have clients that do not accept the CVS_SERVER environment variable, you can rename 'git-cvsserver' to `cvs`. diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index a1f17df074..2c3c4d2994 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -29,7 +29,7 @@ OPTIONS The HTTP daemon command-line that will be executed. Command-line options may be specified here, and the configuration file will be added at the end of the command-line. - Currently apache2, lighttpd, mongoose and webrick are supported. + Currently apache2, lighttpd, mongoose, plackup and webrick are supported. (Default: lighttpd) -m:: diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index a2d55f9745..0e6ff31823 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -133,6 +133,48 @@ Discussion include::i18n.txt[] +Configuration +------------- + +See linkgit:git-config[1] for core variables and linkgit:git-diff[1] +for settings related to diff generation. + +format.pretty:: + Default for the `--format` option. (See "PRETTY FORMATS" above.) + Defaults to "medium". + +i18n.logOutputEncoding:: + Encoding to use when displaying logs. (See "Discussion", above.) + Defaults to the value of `i18n.commitEncoding` if set, UTF-8 + otherwise. + +log.date:: + Default format for human-readable dates. (Compare the + `--date` option.) Defaults to "default", which means to write + dates like `Sat May 8 19:35:34 2010 -0500`. + +log.showroot:: + If `false`, 'git log' and related commands will not treat the + initial commit as a big creation event. Any root commits in + `git log -p` output would be shown without a diff attached. + The default is `true`. + +mailmap.file:: + See linkgit:git-shortlog[1]. + +notes.displayRef:: + Which refs, in addition to the default set by `core.notesRef` + or 'GIT_NOTES_REF', to read notes from when showing commit + messages with the 'log' family of commands. See + linkgit:git-notes[1]. ++ +May be an unabbreviated ref name or a glob and may be specified +multiple times. A warning will be issued for refs that do not exist, +but a glob that does not match any refs is silently ignored. ++ +This setting can be disabled by the `--no-standard-notes` option, +overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, +and supplemented by the `--show-notes` option. Author ------ diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index e3d58cbac3..3ea5aad56c 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -40,16 +40,16 @@ OPTIONS -u:: The commit log message, author name and author email are taken from the e-mail, and after minimally decoding MIME - transfer encoding, re-coded in UTF-8 by transliterating + transfer encoding, re-coded in the charset specified by + i18n.commitencoding (defaulting to UTF-8) by transliterating them. This used to be optional but now it is the default. + Note that the patch is always used as-is without charset conversion, even with this flag. --encoding=<encoding>:: - Similar to -u but if the local convention is different - from what is specified by i18n.commitencoding, this flag - can be used to override it. + Similar to -u. But when re-coding, the charset specified here is + used instead of the one specified by i18n.commitencoding or UTF-8. -n:: Disable all charset re-coding of the metadata. diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index c2325ef90e..84043cc5b2 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -58,7 +58,12 @@ include::merge-options.txt[] -m <msg>:: Set the commit message to be used for the merge commit (in - case one is created). The 'git fmt-merge-msg' command can be + case one is created). + + If `--log` is specified, a shortlog of the commits being merged + will be appended to the specified message. + + The 'git fmt-merge-msg' command can be used to give a good default for automated 'git merge' invocations. diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 4e5113b837..5540af5d16 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -3,7 +3,7 @@ git-notes(1) NAME ---- -git-notes - Add/inspect object notes +git-notes - Add or inspect object notes SYNOPSIS -------- @@ -15,29 +15,31 @@ SYNOPSIS 'git notes' edit [<object>] 'git notes' show [<object>] 'git notes' remove [<object>] -'git notes' prune +'git notes' prune [-n | -v] DESCRIPTION ----------- -This command allows you to add/remove notes to/from objects, without -changing the objects themselves. +Adds, removes, or reads notes attached to objects, without touching +the objects themselves. -A typical use of notes is to extend a commit message without having -to change the commit itself. Such commit notes can be shown by `git log` -along with the original commit message. To discern these notes from the +By default, notes are saved to and read from `refs/notes/commits`, but +this default can be overridden. See the OPTIONS, CONFIGURATION, and +ENVIRONMENT sections below. If this ref does not exist, it will be +quietly created when it is first needed to store a note. + +A typical use of notes is to supplement a commit message without +changing the commit itself. Notes can be shown by 'git log' along with +the original commit message. To distinguish these notes from the message stored in the commit object, the notes are indented like the message, after an unindented line saying "Notes (<refname>):" (or -"Notes:" for the default setting). +"Notes:" for `refs/notes/commits`). -This command always manipulates the notes specified in "core.notesRef" -(see linkgit:git-config[1]), which can be overridden by GIT_NOTES_REF. -To change which notes are shown by 'git-log', see the -"notes.displayRef" configuration. +To change which notes are shown by 'git log', see the +"notes.displayRef" configuration in linkgit:git-log[1]. -See the description of "notes.rewrite.<command>" in -linkgit:git-config[1] for a way of carrying your notes across commands -that rewrite commits. +See the "notes.rewrite.<command>" configuration for a way to carry +notes across commands that rewrite commits. SUBCOMMANDS @@ -101,15 +103,20 @@ OPTIONS Use the given note message (instead of prompting). If multiple `-m` options are given, their values are concatenated as separate paragraphs. + Lines starting with `#` and empty lines other than a + single line between paragraphs will be stripped out. -F <file>:: --file=<file>:: Take the note message from the given file. Use '-' to read the note message from the standard input. + Lines starting with `#` and empty lines other than a + single line between paragraphs will be stripped out. -C <object>:: --reuse-message=<object>:: - Reuse the note message from the given note object. + Take the note message from the given blob object (for + example, another note). -c <object>:: --reedit-message=<object>:: @@ -117,22 +124,151 @@ OPTIONS the user can further edit the note message. --ref <ref>:: - Manipulate the notes tree in <ref>. This overrides both - GIT_NOTES_REF and the "core.notesRef" configuration. The ref + Manipulate the notes tree in <ref>. This overrides + 'GIT_NOTES_REF' and the "core.notesRef" configuration. The ref is taken to be in `refs/notes/` if it is not qualified. +-n:: + Do not remove anything; just report the object names whose notes + would be removed. + +-v:: + Report all object names whose notes are removed. + + +DISCUSSION +---------- -NOTES ------ +Commit notes are blobs containing extra information about an object +(usually information to supplement a commit's message). These blobs +are taken from notes refs. A notes ref is usually a branch which +contains "files" whose paths are the object names for the objects +they describe, with some directory separators included for performance +reasons footnote:[Permitted pathnames have the form +'ab'`/`'cd'`/`'ef'`/`'...'`/`'abcdef...': a sequence of directory +names of two hexadecimal digits each followed by a filename with the +rest of the object ID.]. Every notes change creates a new commit at the specified notes ref. You can therefore inspect the history of the notes by invoking, e.g., -`git log -p notes/commits`. +`git log -p notes/commits`. Currently the commit message only records +which operation triggered the update, and the commit authorship is +determined according to the usual rules (see linkgit:git-commit[1]). +These details may change in the future. + +It is also permitted for a notes ref to point directly to a tree +object, in which case the history of the notes can be read with +`git log -p -g <refname>`. + + +EXAMPLES +-------- + +You can use notes to add annotations with information that was not +available at the time a commit was written. + +------------ +$ git notes add -m 'Tested-by: Johannes Sixt <j6t@kdbg.org>' 72a144e2 +$ git show -s 72a144e +[...] + Signed-off-by: Junio C Hamano <gitster@pobox.com> + +Notes: + Tested-by: Johannes Sixt <j6t@kdbg.org> +------------ + +In principle, a note is a regular Git blob, and any kind of +(non-)format is accepted. You can binary-safely create notes from +arbitrary files using 'git hash-object': + +------------ +$ cc *.c +$ blob=$(git hash-object -w a.out) +$ git notes --ref=built add -C "$blob" HEAD +------------ + +Of course, it doesn't make much sense to display non-text-format notes +with 'git log', so if you use such notes, you'll probably need to write +some special-purpose tools to do something useful with them. + + +CONFIGURATION +------------- -Currently the commit message only records which operation triggered -the update, and the commit authorship is determined according to the -usual rules (see linkgit:git-commit[1]). These details may change in -the future. +core.notesRef:: + Notes ref to read and manipulate instead of + `refs/notes/commits`. Must be an unabbreviated ref name. + This setting can be overridden through the environment and + command line. + +notes.displayRef:: + Which ref (or refs, if a glob or specified more than once), in + addition to the default set by `core.notesRef` or + 'GIT_NOTES_REF', to read notes from when showing commit + messages with the 'git log' family of commands. + This setting can be overridden on the command line or by the + 'GIT_NOTES_DISPLAY_REF' environment variable. + See linkgit:git-log[1]. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`), if this variable is `false`, git will not copy + notes from the original to the rewritten commit. Defaults to + `true`. See also "`notes.rewriteRef`" below. ++ +This setting can be overridden by the 'GIT_NOTES_REWRITE_REF' +environment variable. + +notes.rewriteMode:: + When copying notes during a rewrite, what to do if the target + commit already has a note. Must be one of `overwrite`, + `concatenate`, and `ignore`. Defaults to `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. May be a glob, + in which case notes in all matching refs will be copied. You + may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. ++ +Can be overridden with the 'GIT_NOTES_REWRITE_REF' environment variable. + + +ENVIRONMENT +----------- + +'GIT_NOTES_REF':: + Which ref to manipulate notes from, instead of `refs/notes/commits`. + This overrides the `core.notesRef` setting. + +'GIT_NOTES_DISPLAY_REF':: + Colon-delimited list of refs or globs indicating which refs, + in addition to the default from `core.notesRef` or + 'GIT_NOTES_REF', to read notes from when showing commit + messages. + This overrides the `notes.displayRef` setting. ++ +A warning will be issued for refs that do not exist, but a glob that +does not match any refs is silently ignored. + +'GIT_NOTES_REWRITE_MODE':: + When copying notes during a rewrite, what to do if the target + commit already has a note. + Must be one of `overwrite`, `concatenate`, and `ignore`. + This overrides the `core.rewriteMode` setting. + +'GIT_NOTES_REWRITE_REF':: + When rewriting commits, which notes to copy from the original + to the rewritten commit. Must be a colon-delimited list of + refs or globs. ++ +If not set in the environment, the list of notes to copy depends +on the `notes.rewrite.<command>` and `notes.rewriteRef` settings. Author diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 5863decdc9..50ba2e469f 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -206,6 +206,10 @@ OPTIONS --onto option is not specified, the starting point is <upstream>. May be any valid commit, and not just an existing branch name. ++ +As a special case, you may use "A...B" as a shortcut for the +merge base of A and B if there is exactly one merge base. You can +leave out at most one of A and B, in which case it defaults to HEAD. <upstream>:: Upstream branch to compare against. May be any valid commit, diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index ebaaadc178..aa021b0cb8 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -14,6 +14,7 @@ SYNOPSIS 'git remote rename' <old> <new> 'git remote rm' <name> 'git remote set-head' <name> (-a | -d | <branch>) +'git remote set-branches' <name> [--add] <branch>... 'git remote set-url' [--push] <name> <newurl> [<oldurl>] 'git remote set-url --add' [--push] <name> <newurl> 'git remote set-url --delete' [--push] <name> <url> @@ -110,6 +111,18 @@ remote set-head origin master" will set `$GIT_DIR/refs/remotes/origin/HEAD` to `refs/remotes/origin/master` already exists; if not it must be fetched first. + +'set-branches':: + +Changes the list of branches tracked by the named remote. +This can be used to track a subset of the available remote branches +after the initial setup for a remote. ++ +The named branches will be interpreted as if specified with the +`-t` option on the 'git remote add' command line. ++ +With `--add`, instead of replacing the list of currently tracked +branches, adds to that list. + 'set-url':: Changes URL remote points to. Sets first URL remote points to matching diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 2d4bbfcaf4..fd0fe7cb56 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -27,6 +27,10 @@ OPTIONS --short:: Give the output in the short-format. +-b:: +--branch:: + Show the branch and tracking info even in short-format. + --porcelain:: Give the output in a stable, easy-to-parse format for scripts. Currently this is identical to --short output, but is guaranteed @@ -120,6 +124,10 @@ Ignored files are not listed. ? ? untracked ------------------------------------------------- +If -b is used the short-format status is preceded by a line + +## branchname tracking info + There is an alternate -z format recommended for machine parsing. In that format, the status field is the same, but some other things change. First, the '->' is omitted from rename entries and the field @@ -128,7 +136,7 @@ order is reversed (e.g 'from -> to' becomes 'to from'). Second, a NUL and the terminating newline (but a space still separates the status field from the first filename). Third, filenames containing special characters are not specially formatted; no quoting or -backslash-escaping is performed. +backslash-escaping is performed. Fourth, there is no branch line. CONFIGURATION ------------- diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 2502531a3d..cdabfd29ad 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -145,10 +145,12 @@ summary:: foreach:: Evaluates an arbitrary shell command in each checked out submodule. - The command has access to the variables $name, $path and $sha1: + The command has access to the variables $name, $path, $sha1 and + $toplevel: $name is the name of the relevant submodule section in .gitmodules, $path is the name of the submodule directory relative to the - superproject, and $sha1 is the commit as recorded in the superproject. + superproject, $sha1 is the commit as recorded in the superproject, + and $toplevel is the absolute path to the top-level of the superproject. Any submodules defined in the superproject but not checked out are ignored by this command. Unless given --quiet, foreach prints the name of each submodule before evaluating the command. diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 68dc1879fe..765d4b312e 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -93,8 +93,6 @@ OPTIONS This option can be also used as a coarse file-level mechanism to ignore uncommitted changes in tracked files (akin to what `.gitignore` does for untracked files). -You should remember that an explicit 'git add' operation will -still cause the file to be refreshed from the working tree. Git will fail (gracefully) in case it needs to modify this file in the index e.g. when merging in a commit; thus, in case the assumed-untracked file is changed upstream, diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 98c459dc82..e10fa88b8c 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -83,16 +83,20 @@ Patterns have the following format: - If the pattern does not contain a slash '/', git treats it as a shell glob pattern and checks for a match against the - pathname without leading directories. + pathname relative to the location of the `.gitignore` file + (relative to the toplevel of the work tree if not from a + `.gitignore` file). - Otherwise, git treats the pattern as a shell glob suitable for consumption by fnmatch(3) with the FNM_PATHNAME flag: wildcards in the pattern will not match a / in the pathname. For example, "Documentation/\*.html" matches - "Documentation/git.html" but not - "Documentation/ppc/ppc.html". A leading slash matches the - beginning of the pathname; for example, "/*.c" matches - "cat-file.c" but not "mozilla-sha1/sha1.c". + "Documentation/git.html" but not "Documentation/ppc/ppc.html" + or "tools/perf/Documentation/perf.html". + + - A leading slash matches the beginning of the pathname. + For example, "/*.c" matches "cat-file.c" but not + "mozilla-sha1/sha1.c". An example: diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index bd760d3bd1..8c68ce94f9 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -11,7 +11,12 @@ have limited your view of history: for example, if you are only interested in changes related to a certain directory or file. -Here are some additional details for each format: +There are several built-in formats, and you can define +additional formats by setting a pretty.<name> +config option to either another format name, or a +'format:' string, as described below (see +linkgit:git-config[1]). Here are the details of the +built-in formats: * 'oneline' @@ -76,9 +81,9 @@ displayed in full, regardless of whether --abbrev or true parent commits, without taking grafts nor history simplification into account. -* 'format:' +* 'format:<string>' + -The 'format:' format allows you to specify which information +The 'format:<string>' format allows you to specify which information you want to show. It works a little bit like printf format, with the notable exception that you get a newline with '%n' instead of '\n'. diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index af6d2b995a..d78e121c76 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -3,8 +3,9 @@ Pretty-print the contents of the commit logs in a given format, where '<format>' can be one of 'oneline', 'short', 'medium', - 'full', 'fuller', 'email', 'raw' and 'format:<string>'. - When omitted, the format defaults to 'medium'. + 'full', 'fuller', 'email', 'raw' and 'format:<string>'. See + the "PRETTY FORMATS" section for some additional details for each + format. When omitted, the format defaults to 'medium'. + Note: you can specify the default pretty format in the repository configuration (see linkgit:git-config[1]). @@ -272,6 +272,7 @@ mandir = share/man infodir = share/info gitexecdir = libexec/git-core sharedir = $(prefix)/share +gitwebdir = $(sharedir)/gitweb template_dir = share/git-core/templates htmldir = share/doc/git-doc ifeq ($(prefix),/usr) @@ -627,6 +628,7 @@ LIB_OBJS += tree-diff.o LIB_OBJS += tree.o LIB_OBJS += tree-walk.o LIB_OBJS += unpack-trees.o +LIB_OBJS += url.o LIB_OBJS += usage.o LIB_OBJS += userdiff.o LIB_OBJS += utf8.o @@ -898,6 +900,7 @@ ifeq ($(uname_S),NetBSD) HAVE_PATHS_H = YesPlease endif ifeq ($(uname_S),AIX) + DEFAULT_PAGER = more NO_STRCASESTR=YesPlease NO_MEMMEM = YesPlease NO_MKDTEMP = YesPlease @@ -1039,7 +1042,6 @@ ifneq (,$(findstring MINGW,$(uname_S))) NO_STRTOUMAX = YesPlease NO_MKDTEMP = YesPlease NO_MKSTEMPS = YesPlease - SNPRINTF_RETURNS_BOGUS = YesPlease NO_SVN_TESTS = YesPlease NO_PERL_MAKEMAKER = YesPlease RUNTIME_PREFIX = YesPlease @@ -1076,6 +1078,7 @@ endif -include config.mak ifdef CHECK_HEADER_DEPENDENCIES +COMPUTE_HEADER_DEPENDENCIES = USE_COMPUTED_HEADER_DEPENDENCIES = endif @@ -1442,6 +1445,7 @@ gitexecdir_SQ = $(subst ','\'',$(gitexecdir)) template_dir_SQ = $(subst ','\'',$(template_dir)) htmldir_SQ = $(subst ','\'',$(htmldir)) prefix_SQ = $(subst ','\'',$(prefix)) +gitwebdir_SQ = $(subst ','\'',$(gitwebdir)) SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH)) @@ -1562,11 +1566,10 @@ $(patsubst %.perl,%,$(SCRIPT_PERL)): % : %.perl sed -e '1{' \ -e ' s|#!.*perl|#!$(PERL_PATH_SQ)|' \ -e ' h' \ - -e ' s=.*=use lib (split(/$(pathsep)/, $$ENV{GITPERLLIB} || "@@INSTLIBDIR@@"));=' \ + -e ' s=.*=use lib (split(/$(pathsep)/, $$ENV{GITPERLLIB} || "'"$$INSTLIBDIR"'"));=' \ -e ' H' \ -e ' x' \ -e '}' \ - -e 's|@@INSTLIBDIR@@|'"$$INSTLIBDIR"'|g' \ -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \ $@.perl >$@+ && \ chmod +x $@+ && \ @@ -1578,45 +1581,38 @@ gitweb: $(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) all ifdef JSMIN -GITWEB_PROGRAMS += gitweb/gitweb.min.js -GITWEB_JS = gitweb/gitweb.min.js +GITWEB_PROGRAMS += gitweb/static/gitweb.min.js +GITWEB_JS = gitweb/static/gitweb.min.js else -GITWEB_JS = gitweb/gitweb.js +GITWEB_JS = gitweb/static/gitweb.js endif ifdef CSSMIN -GITWEB_PROGRAMS += gitweb/gitweb.min.css -GITWEB_CSS = gitweb/gitweb.min.css +GITWEB_PROGRAMS += gitweb/static/gitweb.min.css +GITWEB_CSS = gitweb/static/gitweb.min.css else -GITWEB_CSS = gitweb/gitweb.css +GITWEB_CSS = gitweb/static/gitweb.css endif OTHER_PROGRAMS += gitweb/gitweb.cgi $(GITWEB_PROGRAMS) gitweb/gitweb.cgi: gitweb/gitweb.perl $(GITWEB_PROGRAMS) $(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@) ifdef JSMIN -gitweb/gitweb.min.js: gitweb/gitweb.js +gitweb/static/gitweb.min.js: gitweb/static/gitweb.js $(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@) endif # JSMIN ifdef CSSMIN -gitweb/gitweb.min.css: gitweb/gitweb.css +gitweb/static/gitweb.min.css: gitweb/static/gitweb.css $(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@) endif # CSSMIN -git-instaweb: git-instaweb.sh gitweb/gitweb.cgi gitweb/gitweb.css gitweb/gitweb.js +git-instaweb: git-instaweb.sh gitweb/gitweb.cgi gitweb/static/gitweb.css gitweb/static/gitweb.js $(QUIET_GEN)$(RM) $@ $@+ && \ sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \ -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \ -e 's/@@NO_CURL@@/$(NO_CURL)/g' \ - -e '/@@GITWEB_CGI@@/r gitweb/gitweb.cgi' \ - -e '/@@GITWEB_CGI@@/d' \ - -e '/@@GITWEB_CSS@@/r $(GITWEB_CSS)' \ - -e '/@@GITWEB_CSS@@/d' \ - -e '/@@GITWEB_JS@@/r $(GITWEB_JS)' \ - -e '/@@GITWEB_JS@@/d' \ + -e 's|@@GITWEBDIR@@|$(gitwebdir_SQ)|g' \ -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \ - -e 's|@@GITWEB_CSS_NAME@@|$(GITWEB_CSS)|' \ - -e 's|@@GITWEB_JS_NAME@@|$(GITWEB_JS)|' \ $@.sh > $@+ && \ chmod +x $@+ && \ mv $@+ $@ @@ -1668,7 +1664,10 @@ git.o git.spec \ TEST_OBJS := $(patsubst test-%$X,test-%.o,$(TEST_PROGRAMS)) GIT_OBJS := $(LIB_OBJS) $(BUILTIN_OBJS) $(PROGRAM_OBJS) $(TEST_OBJS) \ - git.o http.o http-walker.o remote-curl.o + git.o +ifndef NO_CURL + GIT_OBJS += http.o http-walker.o remote-curl.o +endif XDIFF_OBJS = xdiff/xdiffi.o xdiff/xprepare.o xdiff/xutils.o xdiff/xemit.o \ xdiff/xmerge.o xdiff/xpatience.o OBJECTS := $(GIT_OBJS) $(XDIFF_OBJS) @@ -1983,6 +1982,7 @@ install: all $(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install ifndef NO_PERL $(MAKE) -C perl prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install + $(MAKE) -C gitweb gitwebdir=$(gitwebdir_SQ) install endif ifndef NO_PYTHON $(MAKE) -C git_remote_helpers prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install @@ -2008,12 +2008,13 @@ endif ln -s "git$X" "$$execdir/$$p" 2>/dev/null || \ cp "$$execdir/git$X" "$$execdir/$$p" || exit; \ done; } && \ - { for p in $(REMOTE_CURL_ALIASES); do \ + { test x"$(REMOTE_CURL_ALIASES)" = x || \ + { for p in $(REMOTE_CURL_ALIASES); do \ $(RM) "$$execdir/$$p" && \ ln "$$execdir/git-remote-http$X" "$$execdir/$$p" 2>/dev/null || \ ln -s "git-remote-http$X" "$$execdir/$$p" 2>/dev/null || \ cp "$$execdir/git-remote-http$X" "$$execdir/$$p" || exit; \ - done; } && \ + done; } ; } && \ ./check_bindir "z$$bindir" "z$$execdir" "$$bindir/git-add$X" install-gitweb: @@ -16,6 +16,7 @@ extern const char *help_unknown_cmd(const char *cmd); extern void prune_packed_objects(int); extern int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out); +extern int fmt_merge_msg_shortlog(struct strbuf *in, struct strbuf *out); extern int commit_notes(struct notes_tree *t, const char *msg); struct notes_rewrite_cfg { diff --git a/builtin/blame.c b/builtin/blame.c index fc1586350f..8506286dd2 100644 --- a/builtin/blame.c +++ b/builtin/blame.c @@ -39,7 +39,7 @@ static int show_root; static int reverse; static int blank_boundary; static int incremental; -static int xdl_opts = XDF_NEED_MINIMAL; +static int xdl_opts; static enum date_mode blame_date_mode = DATE_ISO8601; static size_t blame_date_width; @@ -1589,7 +1589,7 @@ static void emit_porcelain(struct scoreboard *sb, struct blame_entry *ent) strcpy(hex, sha1_to_hex(suspect->commit->object.sha1)); printf("%s%c%d %d %d\n", hex, - ent->guilty ? ' ' : '*', // purely for debugging + ent->guilty ? ' ' : '*', /* purely for debugging */ ent->s_lno + 1, ent->lno + 1, ent->num_lines); diff --git a/builtin/clone.c b/builtin/clone.c index 4457922427..efb1e6faa5 100644 --- a/builtin/clone.c +++ b/builtin/clone.c @@ -464,7 +464,8 @@ int cmd_clone(int argc, const char **argv, const char *prefix) set_git_dir(make_absolute_path(git_dir)); if (0 <= option_verbosity) - printf("Cloning into %s...\n", get_git_dir()); + printf("Cloning into %s%s...\n", + option_bare ? "bare repository " : "", dir); init_db(option_template, INIT_DB_QUIET); /* diff --git a/builtin/commit.c b/builtin/commit.c index ddf77e48e1..a861686643 100644 --- a/builtin/commit.c +++ b/builtin/commit.c @@ -93,6 +93,7 @@ static enum { STATUS_FORMAT_SHORT, STATUS_FORMAT_PORCELAIN, } status_format = STATUS_FORMAT_LONG; +static int status_show_branch; static int opt_parse_m(const struct option *opt, const char *arg, int unset) { @@ -134,6 +135,7 @@ static struct option builtin_commit_options[] = { OPT_BOOLEAN(0, "dry-run", &dry_run, "show what would be committed"), OPT_SET_INT(0, "short", &status_format, "show status concisely", STATUS_FORMAT_SHORT), + OPT_BOOLEAN(0, "branch", &status_show_branch, "show branch information"), OPT_SET_INT(0, "porcelain", &status_format, "show porcelain output format", STATUS_FORMAT_PORCELAIN), OPT_BOOLEAN('z', "null", &null_termination, @@ -424,7 +426,7 @@ static int run_status(FILE *fp, const char *index_file, const char *prefix, int switch (status_format) { case STATUS_FORMAT_SHORT: - wt_shortstatus_print(s, null_termination); + wt_shortstatus_print(s, null_termination, status_show_branch); break; case STATUS_FORMAT_PORCELAIN: wt_porcelain_print(s, null_termination); @@ -462,15 +464,21 @@ static void determine_author_info(void) if (!a) die("invalid commit: %s", use_message); - lb = strstr(a + 8, " <"); - rb = strstr(a + 8, "> "); - eol = strchr(a + 8, '\n'); - if (!lb || !rb || !eol) + lb = strchrnul(a + strlen("\nauthor "), '<'); + rb = strchrnul(lb, '>'); + eol = strchrnul(rb, '\n'); + if (!*lb || !*rb || !*eol) die("invalid commit: %s", use_message); - name = xstrndup(a + 8, lb - (a + 8)); - email = xstrndup(lb + 2, rb - (lb + 2)); - date = xstrndup(rb + 2, eol - (rb + 2)); + if (lb == a + strlen("\nauthor ")) + /* \nauthor <foo@example.com> */ + name = xcalloc(1, 1); + else + name = xmemdupz(a + strlen("\nauthor "), + (lb - strlen(" ") - + (a + strlen("\nauthor ")))); + email = xmemdupz(lb + strlen("<"), rb - (lb + strlen("<"))); + date = xmemdupz(rb + strlen("> "), eol - (rb + strlen("> "))); } if (force_author) { @@ -1030,6 +1038,8 @@ int cmd_status(int argc, const char **argv, const char *prefix) OPT__VERBOSE(&verbose), OPT_SET_INT('s', "short", &status_format, "show status concisely", STATUS_FORMAT_SHORT), + OPT_BOOLEAN('b', "branch", &status_show_branch, + "show branch information"), OPT_SET_INT(0, "porcelain", &status_format, "show porcelain output format", STATUS_FORMAT_PORCELAIN), @@ -1082,7 +1092,7 @@ int cmd_status(int argc, const char **argv, const char *prefix) switch (status_format) { case STATUS_FORMAT_SHORT: - wt_shortstatus_print(&s, null_termination); + wt_shortstatus_print(&s, null_termination, status_show_branch); break; case STATUS_FORMAT_PORCELAIN: wt_porcelain_print(&s, null_termination); diff --git a/builtin/fmt-merge-msg.c b/builtin/fmt-merge-msg.c index 379a03131f..44204257c7 100644 --- a/builtin/fmt-merge-msg.c +++ b/builtin/fmt-merge-msg.c @@ -202,35 +202,10 @@ static void shortlog(const char *name, unsigned char *sha1, string_list_clear(&subjects, 0); } -int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { - int limit = 20, i = 0, pos = 0; +static void do_fmt_merge_msg_title(struct strbuf *out, + const char *current_branch) { + int i = 0; char *sep = ""; - unsigned char head_sha1[20]; - const char *current_branch; - - /* get current branch */ - current_branch = resolve_ref("HEAD", head_sha1, 1, NULL); - if (!current_branch) - die("No current branch"); - if (!prefixcmp(current_branch, "refs/heads/")) - current_branch += 11; - - /* get a line */ - while (pos < in->len) { - int len; - char *newline, *p = in->buf + pos; - - newline = strchr(p, '\n'); - len = newline ? newline - p : strlen(p); - pos += len + !!newline; - i++; - p[len] = 0; - if (handle_line(p)) - die ("Error in line %d: %.*s", i, len, p); - } - - if (!srcs.nr) - return 0; strbuf_addstr(out, "Merge "); for (i = 0; i < srcs.nr; i++) { @@ -278,6 +253,40 @@ int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { strbuf_addch(out, '\n'); else strbuf_addf(out, " into %s\n", current_branch); +} + +static int do_fmt_merge_msg(int merge_title, int merge_summary, + struct strbuf *in, struct strbuf *out) { + int limit = 20, i = 0, pos = 0; + unsigned char head_sha1[20]; + const char *current_branch; + + /* get current branch */ + current_branch = resolve_ref("HEAD", head_sha1, 1, NULL); + if (!current_branch) + die("No current branch"); + if (!prefixcmp(current_branch, "refs/heads/")) + current_branch += 11; + + /* get a line */ + while (pos < in->len) { + int len; + char *newline, *p = in->buf + pos; + + newline = strchr(p, '\n'); + len = newline ? newline - p : strlen(p); + pos += len + !!newline; + i++; + p[len] = 0; + if (handle_line(p)) + die ("Error in line %d: %.*s", i, len, p); + } + + if (!srcs.nr) + return 0; + + if (merge_title) + do_fmt_merge_msg_title(out, current_branch); if (merge_summary) { struct commit *head; @@ -289,6 +298,9 @@ int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { rev.ignore_merges = 1; rev.limited = 1; + if (suffixcmp(out->buf, "\n")) + strbuf_addch(out, '\n'); + for (i = 0; i < origins.nr; i++) shortlog(origins.items[i].string, origins.items[i].util, head, &rev, limit, out); @@ -296,6 +308,14 @@ int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { return 0; } +int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { + return do_fmt_merge_msg(1, merge_summary, in, out); +} + +int fmt_merge_msg_shortlog(struct strbuf *in, struct strbuf *out) { + return do_fmt_merge_msg(0, 1, in, out); +} + int cmd_fmt_merge_msg(int argc, const char **argv, const char *prefix) { const char *inpath = NULL; diff --git a/builtin/for-each-ref.c b/builtin/for-each-ref.c index 3a97953177..a2b28c6962 100644 --- a/builtin/for-each-ref.c +++ b/builtin/for-each-ref.c @@ -552,10 +552,10 @@ static void grab_values(struct atom_value *val, int deref, struct object *obj, v grab_person("committer", val, deref, obj, buf, sz); break; case OBJ_TREE: - // grab_tree_values(val, deref, obj, buf, sz); + /* grab_tree_values(val, deref, obj, buf, sz); */ break; case OBJ_BLOB: - // grab_blob_values(val, deref, obj, buf, sz); + /* grab_blob_values(val, deref, obj, buf, sz); */ break; default: die("Eh? Object of type %d?", obj->type); diff --git a/builtin/grep.c b/builtin/grep.c index b194ea3cea..d0a73da07a 100644 --- a/builtin/grep.c +++ b/builtin/grep.c @@ -724,11 +724,15 @@ static int file_callback(const struct option *opt, const char *arg, int unset) if (!patterns) die_errno("cannot open '%s'", arg); while (strbuf_getline(&sb, patterns, '\n') == 0) { + char *s; + size_t len; + /* ignore empty line like grep does */ if (sb.len == 0) continue; - append_grep_pattern(grep_opt, strbuf_detach(&sb, NULL), arg, - ++lno, GREP_PATTERN); + + s = strbuf_detach(&sb, &len); + append_grep_pat(grep_opt, s, len, arg, ++lno, GREP_PATTERN); } fclose(patterns); strbuf_release(&sb); diff --git a/builtin/ls-files.c b/builtin/ls-files.c index c0fbcdcf4f..0804047693 100644 --- a/builtin/ls-files.c +++ b/builtin/ls-files.c @@ -26,8 +26,9 @@ static int show_killed; static int show_valid_bit; static int line_terminator = '\n'; +static const char *prefix; +static int max_prefix_len; static int prefix_len; -static int prefix_offset; static const char **pathspec; static int error_unmatch; static char *ps_matched; @@ -43,10 +44,15 @@ static const char *tag_modified = ""; static const char *tag_skip_worktree = ""; static const char *tag_resolve_undo = ""; +static void write_name(const char* name, size_t len) +{ + write_name_quoted_relative(name, len, prefix, prefix_len, stdout, + line_terminator); +} + static void show_dir_entry(const char *tag, struct dir_entry *ent) { - int len = prefix_len; - int offset = prefix_offset; + int len = max_prefix_len; if (len >= ent->len) die("git ls-files: internal error - directory entry not superset of prefix"); @@ -55,7 +61,7 @@ static void show_dir_entry(const char *tag, struct dir_entry *ent) return; fputs(tag, stdout); - write_name_quoted(ent->name + offset, stdout, line_terminator); + write_name(ent->name, ent->len); } static void show_other_files(struct dir_struct *dir) @@ -121,8 +127,7 @@ static void show_killed_files(struct dir_struct *dir) static void show_ce_entry(const char *tag, struct cache_entry *ce) { - int len = prefix_len; - int offset = prefix_offset; + int len = max_prefix_len; if (len >= ce_namelen(ce)) die("git ls-files: internal error - cache entry not superset of prefix"); @@ -156,20 +161,19 @@ static void show_ce_entry(const char *tag, struct cache_entry *ce) find_unique_abbrev(ce->sha1,abbrev), ce_stage(ce)); } - write_name_quoted(ce->name + offset, stdout, line_terminator); + write_name(ce->name, ce_namelen(ce)); } static int show_one_ru(struct string_list_item *item, void *cbdata) { - int offset = prefix_offset; const char *path = item->string; struct resolve_undo_info *ui = item->util; int i, len; len = strlen(path); - if (len < prefix_len) + if (len < max_prefix_len) return 0; /* outside of the prefix */ - if (!match_pathspec(pathspec, path, len, prefix_len, ps_matched)) + if (!match_pathspec(pathspec, path, len, max_prefix_len, ps_matched)) return 0; /* uninterested */ for (i = 0; i < 3; i++) { if (!ui->mode[i]) @@ -177,19 +181,19 @@ static int show_one_ru(struct string_list_item *item, void *cbdata) printf("%s%06o %s %d\t", tag_resolve_undo, ui->mode[i], find_unique_abbrev(ui->sha1[i], abbrev), i + 1); - write_name_quoted(path + offset, stdout, line_terminator); + write_name(path, len); } return 0; } -static void show_ru_info(const char *prefix) +static void show_ru_info(void) { if (!the_index.resolve_undo) return; for_each_string_list(show_one_ru, the_index.resolve_undo, NULL); } -static void show_files(struct dir_struct *dir, const char *prefix) +static void show_files(struct dir_struct *dir) { int i; @@ -243,7 +247,7 @@ static void show_files(struct dir_struct *dir, const char *prefix) */ static void prune_cache(const char *prefix) { - int pos = cache_name_pos(prefix, prefix_len); + int pos = cache_name_pos(prefix, max_prefix_len); unsigned int first, last; if (pos < 0) @@ -256,7 +260,7 @@ static void prune_cache(const char *prefix) while (last > first) { int next = (last + first) >> 1; struct cache_entry *ce = active_cache[next]; - if (!strncmp(ce->name, prefix, prefix_len)) { + if (!strncmp(ce->name, prefix, max_prefix_len)) { first = next+1; continue; } @@ -265,11 +269,16 @@ static void prune_cache(const char *prefix) active_nr = last; } -static const char *verify_pathspec(const char *prefix) +static const char *pathspec_prefix(const char *prefix) { const char **p, *n, *prev; unsigned long max; + if (!pathspec) { + max_prefix_len = prefix ? strlen(prefix) : 0; + return prefix; + } + prev = NULL; max = PATH_MAX; for (p = pathspec; (n = *p) != NULL; p++) { @@ -291,10 +300,7 @@ static const char *verify_pathspec(const char *prefix) } } - if (prefix_offset > max || memcmp(prev, prefix, prefix_offset)) - die("git ls-files: cannot generate relative filenames containing '..'"); - - prefix_len = max; + max_prefix_len = max; return max ? xmemdupz(prev, max) : NULL; } @@ -374,7 +380,7 @@ void overlay_tree_on_cache(const char *tree_name, const char *prefix) } } -int report_path_error(const char *ps_matched, const char **pathspec, int prefix_offset) +int report_path_error(const char *ps_matched, const char **pathspec, int prefix_len) { /* * Make sure all pathspec matched; otherwise it is an error. @@ -404,7 +410,7 @@ int report_path_error(const char *ps_matched, const char **pathspec, int prefix_ continue; error("pathspec '%s' did not match any file(s) known to git.", - pathspec[num] + prefix_offset); + pathspec[num] + prefix_len); errors++; } return errors; @@ -456,9 +462,10 @@ static int option_parse_exclude_standard(const struct option *opt, return 0; } -int cmd_ls_files(int argc, const char **argv, const char *prefix) +int cmd_ls_files(int argc, const char **argv, const char *cmd_prefix) { int require_work_tree = 0, show_tag = 0; + const char *max_prefix; struct dir_struct dir; struct option builtin_ls_files_options[] = { { OPTION_CALLBACK, 'z', NULL, NULL, NULL, @@ -504,7 +511,7 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) { OPTION_CALLBACK, 0, "exclude-standard", &dir, NULL, "add the standard git exclusions", PARSE_OPT_NOARG, option_parse_exclude_standard }, - { OPTION_SET_INT, 0, "full-name", &prefix_offset, NULL, + { OPTION_SET_INT, 0, "full-name", &prefix_len, NULL, "make the output relative to the project top directory", PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL }, OPT_BOOLEAN(0, "error-unmatch", &error_unmatch, @@ -516,8 +523,9 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) }; memset(&dir, 0, sizeof(dir)); + prefix = cmd_prefix; if (prefix) - prefix_offset = strlen(prefix); + prefix_len = strlen(prefix); git_config(git_default_config, NULL); if (read_cache() < 0) @@ -555,9 +563,8 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) if (pathspec) strip_trailing_slash_from_submodules(); - /* Verify that the pathspec matches the prefix */ - if (pathspec) - prefix = verify_pathspec(prefix); + /* Find common prefix for all pathspec's */ + max_prefix = pathspec_prefix(prefix); /* Treat unmatching pathspec elements as errors */ if (pathspec && error_unmatch) { @@ -575,8 +582,8 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) show_killed | show_modified | show_resolve_undo)) show_cached = 1; - if (prefix) - prune_cache(prefix); + if (max_prefix) + prune_cache(max_prefix); if (with_tree) { /* * Basic sanity check; show-stages and show-unmerged @@ -584,15 +591,15 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) */ if (show_stage || show_unmerged) die("ls-files --with-tree is incompatible with -s or -u"); - overlay_tree_on_cache(with_tree, prefix); + overlay_tree_on_cache(with_tree, max_prefix); } - show_files(&dir, prefix); + show_files(&dir); if (show_resolve_undo) - show_ru_info(prefix); + show_ru_info(); if (ps_matched) { int bad; - bad = report_path_error(ps_matched, pathspec, prefix_offset); + bad = report_path_error(ps_matched, pathspec, prefix_len); if (bad) fprintf(stderr, "Did you forget to 'git add'?\n"); diff --git a/builtin/ls-remote.c b/builtin/ls-remote.c index 8ee91eb547..34480cfad6 100644 --- a/builtin/ls-remote.c +++ b/builtin/ls-remote.c @@ -5,7 +5,7 @@ static const char ls_remote_usage[] = "git ls-remote [--heads] [--tags] [-u <exec> | --upload-pack <exec>]\n" -" [<repository> [<refs>...]]"; +" [-q|--quiet] [<repository> [<refs>...]]"; /* * Is there one among the list of patterns that match the tail part @@ -34,6 +34,7 @@ int cmd_ls_remote(int argc, const char **argv, const char *prefix) const char *dest = NULL; int nongit; unsigned flags = 0; + int quiet = 0; const char *uploadpack = NULL; const char **pattern = NULL; @@ -67,6 +68,10 @@ int cmd_ls_remote(int argc, const char **argv, const char *prefix) flags |= REF_NORMAL; continue; } + if (!strcmp("--quiet", arg) || !strcmp("-q", arg)) { + quiet = 1; + continue; + } usage(ls_remote_usage); } dest = arg; @@ -99,6 +104,9 @@ int cmd_ls_remote(int argc, const char **argv, const char *prefix) ref = transport_get_remote_refs(transport); if (transport_disconnect(transport)) return 1; + + if (!dest && !quiet) + fprintf(stderr, "From %s\n", *remote->url); for ( ; ref; ref = ref->next) { if (!check_ref_type(ref, flags)) continue; diff --git a/builtin/merge-file.c b/builtin/merge-file.c index 610849a653..b8e9e5ba01 100644 --- a/builtin/merge-file.c +++ b/builtin/merge-file.c @@ -25,7 +25,7 @@ int cmd_merge_file(int argc, const char **argv, const char *prefix) const char *names[3] = { NULL, NULL, NULL }; mmfile_t mmfs[3]; mmbuffer_t result = {NULL, 0}; - xmparam_t xmp = {{XDF_NEED_MINIMAL}}; + xmparam_t xmp = {{0}}; int ret = 0, i = 0, to_stdout = 0; int quiet = 0; int nongit; diff --git a/builtin/merge-tree.c b/builtin/merge-tree.c index a4a4f2ce4c..fc00d794d6 100644 --- a/builtin/merge-tree.c +++ b/builtin/merge-tree.c @@ -106,7 +106,7 @@ static void show_diff(struct merge_list *entry) xdemitconf_t xecfg; xdemitcb_t ecb; - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 3; ecb.outf = show_outf; diff --git a/builtin/merge.c b/builtin/merge.c index 37d414b3ba..37ce4f589f 100644 --- a/builtin/merge.c +++ b/builtin/merge.c @@ -982,7 +982,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix) reset_hard(remote_head->sha1, 0); return 0; } else { - struct strbuf msg = STRBUF_INIT; + struct strbuf merge_names = STRBUF_INIT; /* We are invoked directly as the first-class UI. */ head_arg = "HEAD"; @@ -995,13 +995,17 @@ int cmd_merge(int argc, const char **argv, const char *prefix) * codepath so we discard the error in this * loop. */ - if (!have_message) { - for (i = 0; i < argc; i++) - merge_name(argv[i], &msg); - fmt_merge_msg(option_log, &msg, &merge_msg); - if (merge_msg.len) - strbuf_setlen(&merge_msg, merge_msg.len-1); - } + for (i = 0; i < argc; i++) + merge_name(argv[i], &merge_names); + + if (have_message && option_log) + fmt_merge_msg_shortlog(&merge_names, &merge_msg); + else if (!have_message) + fmt_merge_msg(option_log, &merge_names, &merge_msg); + + + if (!(have_message && !option_log) && merge_msg.len) + strbuf_setlen(&merge_msg, merge_msg.len-1); } if (head_invalid || !argc) diff --git a/builtin/notes.c b/builtin/notes.c index 52b72fca68..648033c27e 100644 --- a/builtin/notes.c +++ b/builtin/notes.c @@ -26,7 +26,7 @@ static const char * const git_notes_usage[] = { "git notes [--ref <notes_ref>] edit [<object>]", "git notes [--ref <notes_ref>] show [<object>]", "git notes [--ref <notes_ref>] remove [<object>]", - "git notes [--ref <notes_ref>] prune", + "git notes [--ref <notes_ref>] prune [-n | -v]", NULL }; @@ -67,7 +67,7 @@ static const char * const git_notes_remove_usage[] = { }; static const char * const git_notes_prune_usage[] = { - "git notes prune", + "git notes prune [<options>]", NULL }; @@ -416,7 +416,7 @@ int notes_copy_from_stdin(int force, const char *rewrite_cmd) { struct strbuf buf = STRBUF_INIT; struct notes_rewrite_cfg *c = NULL; - struct notes_tree *t; + struct notes_tree *t = NULL; int ret = 0; if (rewrite_cmd) { @@ -792,7 +792,10 @@ static int remove_cmd(int argc, const char **argv, const char *prefix) static int prune(int argc, const char **argv, const char *prefix) { struct notes_tree *t; + int show_only = 0, verbose = 0; struct option options[] = { + OPT_BOOLEAN('n', NULL, &show_only, "do not remove, show only"), + OPT_BOOLEAN('v', NULL, &verbose, "report pruned notes"), OPT_END() }; @@ -806,8 +809,10 @@ static int prune(int argc, const char **argv, const char *prefix) t = init_notes_check("prune"); - prune_notes(t); - commit_notes(t, "Notes removed by 'git notes prune'"); + prune_notes(t, (verbose ? NOTES_PRUNE_VERBOSE : 0) | + (show_only ? NOTES_PRUNE_VERBOSE|NOTES_PRUNE_DRYRUN : 0) ); + if (!show_only) + commit_notes(t, "Notes removed by 'git notes prune'"); free_notes(t); return 0; } diff --git a/builtin/pack-objects.c b/builtin/pack-objects.c index 214d7ef2b1..0e81673118 100644 --- a/builtin/pack-objects.c +++ b/builtin/pack-objects.c @@ -1529,6 +1529,8 @@ static void try_to_free_from_threads(size_t size) read_unlock(); } +try_to_free_t old_try_to_free_routine; + /* * The main thread waits on the condition that (at least) one of the workers * has stopped working (which is indicated in the .working member of @@ -1563,12 +1565,12 @@ static void init_threaded_search(void) pthread_mutex_init(&cache_mutex, NULL); pthread_mutex_init(&progress_mutex, NULL); pthread_cond_init(&progress_cond, NULL); - set_try_to_free_routine(try_to_free_from_threads); + old_try_to_free_routine = set_try_to_free_routine(try_to_free_from_threads); } static void cleanup_threaded_search(void) { - set_try_to_free_routine(NULL); + set_try_to_free_routine(old_try_to_free_routine); pthread_cond_destroy(&progress_cond); pthread_mutex_destroy(&read_mutex); pthread_mutex_destroy(&cache_mutex); diff --git a/builtin/remote.c b/builtin/remote.c index 0e99a9957d..4745957b96 100644 --- a/builtin/remote.c +++ b/builtin/remote.c @@ -16,6 +16,7 @@ static const char * const builtin_remote_usage[] = { "git remote [-v | --verbose] show [-n] <name>", "git remote prune [-n | --dry-run] <name>", "git remote [-v | --verbose] update [-p | --prune] [group | remote]", + "git remote set-branches <name> [--add] <branch>...", "git remote set-url <name> <newurl> [<oldurl>]", "git remote set-url --add <name> <newurl>", "git remote set-url --delete <name> <url>", @@ -42,6 +43,12 @@ static const char * const builtin_remote_sethead_usage[] = { NULL }; +static const char * const builtin_remote_setbranches_usage[] = { + "git remote set-branches <name> <branch>...", + "git remote set-branches --add <name> <branch>...", + NULL +}; + static const char * const builtin_remote_show_usage[] = { "git remote show [<options>] <name>", NULL @@ -110,6 +117,20 @@ enum { TAGS_SET = 2 }; +static int add_branch(const char *key, const char *branchname, + const char *remotename, int mirror, struct strbuf *tmp) +{ + strbuf_reset(tmp); + strbuf_addch(tmp, '+'); + if (mirror) + strbuf_addf(tmp, "refs/%s:refs/%s", + branchname, branchname); + else + strbuf_addf(tmp, "refs/heads/%s:refs/remotes/%s/%s", + branchname, remotename, branchname); + return git_config_set_multivar(key, tmp->buf, "^$", 0); +} + static int add(int argc, const char **argv) { int fetch = 0, mirror = 0, fetch_tags = TAGS_DEFAULT; @@ -162,17 +183,8 @@ static int add(int argc, const char **argv) if (track.nr == 0) string_list_append("*", &track); for (i = 0; i < track.nr; i++) { - struct string_list_item *item = track.items + i; - - strbuf_reset(&buf2); - strbuf_addch(&buf2, '+'); - if (mirror) - strbuf_addf(&buf2, "refs/%s:refs/%s", - item->string, item->string); - else - strbuf_addf(&buf2, "refs/heads/%s:refs/remotes/%s/%s", - item->string, name, item->string); - if (git_config_set_multivar(buf.buf, buf2.buf, "^$", 0)) + if (add_branch(buf.buf, track.items[i].string, + name, mirror, &buf2)) return 1; } @@ -1284,6 +1296,72 @@ static int update(int argc, const char **argv) return run_command_v_opt(fetch_argv, RUN_GIT_CMD); } +static int remove_all_fetch_refspecs(const char *remote, const char *key) +{ + return git_config_set_multivar(key, NULL, NULL, 1); +} + +static int add_branches(struct remote *remote, const char **branches, + const char *key) +{ + const char *remotename = remote->name; + int mirror = remote->mirror; + struct strbuf refspec = STRBUF_INIT; + + for (; *branches; branches++) + if (add_branch(key, *branches, remotename, mirror, &refspec)) { + strbuf_release(&refspec); + return 1; + } + + strbuf_release(&refspec); + return 0; +} + +static int set_remote_branches(const char *remotename, const char **branches, + int add_mode) +{ + struct strbuf key = STRBUF_INIT; + struct remote *remote; + + strbuf_addf(&key, "remote.%s.fetch", remotename); + + if (!remote_is_configured(remotename)) + die("No such remote '%s'", remotename); + remote = remote_get(remotename); + + if (!add_mode && remove_all_fetch_refspecs(remotename, key.buf)) { + strbuf_release(&key); + return 1; + } + if (add_branches(remote, branches, key.buf)) { + strbuf_release(&key); + return 1; + } + + strbuf_release(&key); + return 0; +} + +static int set_branches(int argc, const char **argv) +{ + int add_mode = 0; + struct option options[] = { + OPT_BOOLEAN('\0', "add", &add_mode, "add branch"), + OPT_END() + }; + + argc = parse_options(argc, argv, NULL, options, + builtin_remote_setbranches_usage, 0); + if (argc == 0) { + error("no remote specified"); + usage_with_options(builtin_remote_seturl_usage, options); + } + argv[argc] = NULL; + + return set_remote_branches(argv[0], argv + 1, add_mode); +} + static int set_url(int argc, const char **argv) { int i, push_mode = 0, add_mode = 0, delete_mode = 0; @@ -1449,6 +1527,8 @@ int cmd_remote(int argc, const char **argv, const char *prefix) result = rm(argc, argv); else if (!strcmp(argv[0], "set-head")) result = set_head(argc, argv); + else if (!strcmp(argv[0], "set-branches")) + result = set_branches(argc, argv); else if (!strcmp(argv[0], "set-url")) result = set_url(argc, argv); else if (!strcmp(argv[0], "show")) diff --git a/builtin/rerere.c b/builtin/rerere.c index 34f9acee91..0048f9ef7f 100644 --- a/builtin/rerere.c +++ b/builtin/rerere.c @@ -89,7 +89,7 @@ static int diff_two(const char *file1, const char *label1, printf("--- a/%s\n+++ b/%s\n", label1, label2); fflush(stdout); memset(&xpp, 0, sizeof(xpp)); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 3; ecb.outf = outf; diff --git a/builtin/show-branch.c b/builtin/show-branch.c index e20fcf3e93..e8719aa9e9 100644 --- a/builtin/show-branch.c +++ b/builtin/show-branch.c @@ -313,7 +313,8 @@ static void show_one_commit(struct commit *commit, int no_name) } else printf("[%s] ", - find_unique_abbrev(commit->object.sha1, 7)); + find_unique_abbrev(commit->object.sha1, + DEFAULT_ABBREV)); } puts(pretty_str); strbuf_release(&pretty); diff --git a/combine-diff.c b/combine-diff.c index 7557136c82..655fa89d8a 100644 --- a/combine-diff.c +++ b/combine-diff.c @@ -220,7 +220,7 @@ static void combine_diff(const unsigned char *parent, unsigned int mode, parent_file.ptr = grab_blob(parent, mode, &sz); parent_file.size = sz; memset(&xpp, 0, sizeof(xpp)); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); memset(&state, 0, sizeof(state)); state.nmask = nmask; diff --git a/compat/mingw.h b/compat/mingw.h index 0e3e743041..f465566b7a 100644 --- a/compat/mingw.h +++ b/compat/mingw.h @@ -80,7 +80,7 @@ static inline int fork(void) static inline unsigned int alarm(unsigned int seconds) { return 0; } static inline int fsync(int fd) -{ return 0; } +{ return _commit(fd); } static inline int getppid(void) { return 1; } static inline void sync(void) @@ -5,6 +5,7 @@ #include "refs.h" #include "run-command.h" #include "remote.h" +#include "url.h" static char *server_capabilities; @@ -450,7 +451,7 @@ static struct child_process no_fork; struct child_process *git_connect(int fd[2], const char *url_orig, const char *prog, int flags) { - char *url = xstrdup(url_orig); + char *url; char *host, *path; char *end; int c; @@ -466,6 +467,11 @@ struct child_process *git_connect(int fd[2], const char *url_orig, */ signal(SIGCHLD, SIG_DFL); + if (is_url(url_orig)) + url = url_decode(url_orig); + else + url = xstrdup(url_orig); + host = strstr(url, "://"); if (host) { *host = '\0'; diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index b70cca13fd..aebb0b6890 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -797,6 +797,7 @@ _git_branch () __gitcomp " --color --no-color --verbose --abbrev= --no-abbrev --track --no-track --contains --merged --no-merged + --set-upstream " ;; *) @@ -425,6 +425,8 @@ static int count_ident(const char *cp, unsigned long size) cnt++; break; } + if (ch == '\n') + break; } } return cnt; @@ -455,6 +457,11 @@ static int ident_to_git(const char *path, const char *src, size_t len, dollar = memchr(src + 3, '$', len - 3); if (!dollar) break; + if (memchr(src + 3, '\n', dollar - src - 3)) { + /* Line break before the next dollar. */ + continue; + } + memcpy(dst, "Id$", 3); dst += 3; len -= dollar + 1 - src; @@ -470,7 +477,7 @@ static int ident_to_worktree(const char *path, const char *src, size_t len, struct strbuf *buf, int ident) { unsigned char sha1[20]; - char *to_free = NULL, *dollar; + char *to_free = NULL, *dollar, *spc; int cnt; if (!ident) @@ -506,7 +513,10 @@ static int ident_to_worktree(const char *path, const char *src, size_t len, } else if (src[2] == ':') { /* * It's possible that an expanded Id has crept its way into the - * repository, we cope with that by stripping the expansion out + * repository, we cope with that by stripping the expansion out. + * This is probably not a good idea, since it will cause changes + * on checkout, which won't go away by stash, but let's keep it + * for git-style ids. */ dollar = memchr(src + 3, '$', len - 3); if (!dollar) { @@ -514,6 +524,20 @@ static int ident_to_worktree(const char *path, const char *src, size_t len, break; } + if (memchr(src + 3, '\n', dollar - src - 3)) { + /* Line break before the next dollar. */ + continue; + } + + spc = memchr(src + 4, ' ', dollar - src - 4); + if (spc && spc < dollar-1) { + /* There are spaces in unexpected places. + * This is probably an id from some other + * versioning system. Keep it for now. + */ + continue; + } + len -= dollar + 1 - src; src = dollar + 1; } else { @@ -229,6 +229,7 @@ static const struct { { "GMT", 0, 0, }, /* Greenwich Mean */ { "UTC", 0, 0, }, /* Universal (Coordinated) */ + { "Z", 0, 0, }, /* Zulu, alias for UTC */ { "WET", 0, 0, }, /* Western European */ { "BST", 0, 1, }, /* British Summer */ @@ -305,7 +306,7 @@ static int match_alpha(const char *date, struct tm *tm, int *offset) for (i = 0; i < ARRAY_SIZE(timezone_names); i++) { int match = match_string(date, timezone_names[i].name); - if (match >= 3) { + if (match >= 3 || match == strlen(timezone_names[i].name)) { int off = timezone_names[i].offset; /* This is bogus, but we like summer */ diff --git a/diff-no-index.c b/diff-no-index.c index aae8e7accc..4cd9dacbe8 100644 --- a/diff-no-index.c +++ b/diff-no-index.c @@ -150,16 +150,14 @@ static int queue_diff(struct diff_options *o, static int path_outside_repo(const char *path) { - /* - * We have already done setup_git_directory_gently() so we - * know we are inside a git work tree already. - */ const char *work_tree; size_t len; if (!is_absolute_path(path)) return 0; work_tree = get_git_work_tree(); + if (!work_tree) + return 1; len = strlen(work_tree); if (strncmp(path, work_tree, len) || (path[len] != '\0' && path[len] != '/')) @@ -30,6 +30,7 @@ static const char *diff_word_regex_cfg; static const char *external_diff_cmd_cfg; int diff_auto_refresh_index = 1; static int diff_mnemonic_prefix; +static int diff_no_prefix; static char diff_colors[][COLOR_MAXLEN] = { GIT_COLOR_RESET, @@ -101,6 +102,10 @@ int git_diff_ui_config(const char *var, const char *value, void *cb) diff_mnemonic_prefix = git_config_bool(var, value); return 0; } + if (!strcmp(var, "diff.noprefix")) { + diff_no_prefix = git_config_bool(var, value); + return 0; + } if (!strcmp(var, "diff.external")) return git_config_string(&external_diff_cmd_cfg, var, value); if (!strcmp(var, "diff.wordregex")) @@ -194,8 +199,8 @@ struct emit_callback { sane_truncate_fn truncate; const char **label_path; struct diff_words_data *diff_words; + struct diff_options *opt; int *found_changesp; - FILE *file; struct strbuf *header; }; @@ -282,11 +287,19 @@ static void check_blank_at_eof(mmfile_t *mf1, mmfile_t *mf2, ecbdata->blank_at_eof_in_postimage = (at - l2) + 1; } -static void emit_line_0(FILE *file, const char *set, const char *reset, +static void emit_line_0(struct diff_options *o, const char *set, const char *reset, int first, const char *line, int len) { int has_trailing_newline, has_trailing_carriage_return; int nofirst; + FILE *file = o->file; + + if (o->output_prefix) { + struct strbuf *msg = NULL; + msg = o->output_prefix(o, o->output_prefix_data); + assert(msg); + fwrite(msg->buf, msg->len, 1, file); + } if (len == 0) { has_trailing_newline = (first == '\n'); @@ -316,10 +329,10 @@ static void emit_line_0(FILE *file, const char *set, const char *reset, fputc('\n', file); } -static void emit_line(FILE *file, const char *set, const char *reset, +static void emit_line(struct diff_options *o, const char *set, const char *reset, const char *line, int len) { - emit_line_0(file, set, reset, line[0], line+1, len-1); + emit_line_0(o, set, reset, line[0], line+1, len-1); } static int new_blank_line_at_eof(struct emit_callback *ecbdata, const char *line, int len) @@ -341,15 +354,15 @@ static void emit_add_line(const char *reset, const char *set = diff_get_color(ecbdata->color_diff, DIFF_FILE_NEW); if (!*ws) - emit_line_0(ecbdata->file, set, reset, '+', line, len); + emit_line_0(ecbdata->opt, set, reset, '+', line, len); else if (new_blank_line_at_eof(ecbdata, line, len)) /* Blank line at EOF - paint '+' as well */ - emit_line_0(ecbdata->file, ws, reset, '+', line, len); + emit_line_0(ecbdata->opt, ws, reset, '+', line, len); else { /* Emit just the prefix, then the rest. */ - emit_line_0(ecbdata->file, set, reset, '+', "", 0); + emit_line_0(ecbdata->opt, set, reset, '+', "", 0); ws_check_emit(line, len, ecbdata->ws_rule, - ecbdata->file, set, reset, ws); + ecbdata->opt->file, set, reset, ws); } } @@ -362,6 +375,9 @@ static void emit_hunk_header(struct emit_callback *ecbdata, const char *reset = diff_get_color(ecbdata->color_diff, DIFF_RESET); static const char atat[2] = { '@', '@' }; const char *cp, *ep; + struct strbuf msgbuf = STRBUF_INIT; + int org_len = len; + int i = 1; /* * As a hunk header must begin with "@@ -<old>, +<new> @@", @@ -370,23 +386,42 @@ static void emit_hunk_header(struct emit_callback *ecbdata, if (len < 10 || memcmp(line, atat, 2) || !(ep = memmem(line + 2, len - 2, atat, 2))) { - emit_line(ecbdata->file, plain, reset, line, len); + emit_line(ecbdata->opt, plain, reset, line, len); return; } ep += 2; /* skip over @@ */ /* The hunk header in fraginfo color */ - emit_line(ecbdata->file, frag, reset, line, ep - line); + strbuf_add(&msgbuf, frag, strlen(frag)); + strbuf_add(&msgbuf, line, ep - line); + strbuf_add(&msgbuf, reset, strlen(reset)); + + /* + * trailing "\r\n" + */ + for ( ; i < 3; i++) + if (line[len - i] == '\r' || line[len - i] == '\n') + len--; /* blank before the func header */ for (cp = ep; ep - line < len; ep++) if (*ep != ' ' && *ep != '\t') break; - if (ep != cp) - emit_line(ecbdata->file, plain, reset, cp, ep - cp); + if (ep != cp) { + strbuf_add(&msgbuf, plain, strlen(plain)); + strbuf_add(&msgbuf, cp, ep - cp); + strbuf_add(&msgbuf, reset, strlen(reset)); + } + + if (ep < line + len) { + strbuf_add(&msgbuf, func, strlen(func)); + strbuf_add(&msgbuf, ep, line + len - ep); + strbuf_add(&msgbuf, reset, strlen(reset)); + } - if (ep < line + len) - emit_line(ecbdata->file, func, reset, ep, line + len - ep); + strbuf_add(&msgbuf, line + len, org_len - len); + emit_line(ecbdata->opt, "", "", msgbuf.buf, msgbuf.len); + strbuf_release(&msgbuf); } static struct diff_tempfile *claim_diff_tempfile(void) { @@ -446,7 +481,7 @@ static void emit_rewrite_lines(struct emit_callback *ecb, len = endp ? (endp - data + 1) : size; if (prefix != '+') { ecb->lno_in_preimage++; - emit_line_0(ecb->file, old, reset, '-', + emit_line_0(ecb->opt, old, reset, '-', data, len); } else { ecb->lno_in_postimage++; @@ -458,7 +493,7 @@ static void emit_rewrite_lines(struct emit_callback *ecb, if (!endp) { const char *plain = diff_get_color(ecb->color_diff, DIFF_PLAIN); - emit_line_0(ecb->file, plain, reset, '\\', + emit_line_0(ecb->opt, plain, reset, '\\', nneof, strlen(nneof)); } } @@ -482,6 +517,13 @@ static void emit_rewrite_diff(const char *name_a, char *data_one, *data_two; size_t size_one, size_two; struct emit_callback ecbdata; + char *line_prefix = ""; + struct strbuf *msgbuf; + + if (o && o->output_prefix) { + msgbuf = o->output_prefix(o, o->output_prefix_data); + line_prefix = msgbuf->buf; + } if (diff_mnemonic_prefix && DIFF_OPT_TST(o, REVERSE_DIFF)) { a_prefix = o->b_prefix; @@ -508,7 +550,7 @@ static void emit_rewrite_diff(const char *name_a, ecbdata.color_diff = color_diff; ecbdata.found_changesp = &o->found_changes; ecbdata.ws_rule = whitespace_rule(name_b ? name_b : name_a); - ecbdata.file = o->file; + ecbdata.opt = o; if (ecbdata.ws_rule & WS_BLANK_AT_EOF) { mmfile_t mf1, mf2; mf1.ptr = (char *)data_one; @@ -523,9 +565,10 @@ static void emit_rewrite_diff(const char *name_a, lc_a = count_lines(data_one, size_one); lc_b = count_lines(data_two, size_two); fprintf(o->file, - "%s--- %s%s%s\n%s+++ %s%s%s\n%s@@ -", - metainfo, a_name.buf, name_a_tab, reset, - metainfo, b_name.buf, name_b_tab, reset, fraginfo); + "%s%s--- %s%s%s\n%s%s+++ %s%s%s\n%s%s@@ -", + line_prefix, metainfo, a_name.buf, name_a_tab, reset, + line_prefix, metainfo, b_name.buf, name_b_tab, reset, + line_prefix, fraginfo); print_line_count(o->file, lc_a); fprintf(o->file, " +"); print_line_count(o->file, lc_b); @@ -584,7 +627,8 @@ struct diff_words_style diff_words_styles[] = { struct diff_words_data { struct diff_words_buffer minus, plus; const char *current_plus; - FILE *file; + int last_minus; + struct diff_options *opt; regex_t *word_regex; enum diff_words_type type; struct diff_words_style *style; @@ -593,10 +637,15 @@ struct diff_words_data { static int fn_out_diff_words_write_helper(FILE *fp, struct diff_words_style_elem *st_el, const char *newline, - size_t count, const char *buf) + size_t count, const char *buf, + const char *line_prefix) { + int print = 0; + while (count) { char *p = memchr(buf, '\n', count); + if (print) + fputs(line_prefix, fp); if (p != buf) { if (st_el->color && fputs(st_el->color, fp) < 0) return -1; @@ -614,21 +663,74 @@ static int fn_out_diff_words_write_helper(FILE *fp, return -1; count -= p + 1 - buf; buf = p + 1; + print = 1; } return 0; } +/* + * '--color-words' algorithm can be described as: + * + * 1. collect a the minus/plus lines of a diff hunk, divided into + * minus-lines and plus-lines; + * + * 2. break both minus-lines and plus-lines into words and + * place them into two mmfile_t with one word for each line; + * + * 3. use xdiff to run diff on the two mmfile_t to get the words level diff; + * + * And for the common parts of the both file, we output the plus side text. + * diff_words->current_plus is used to trace the current position of the plus file + * which printed. diff_words->last_minus is used to trace the last minus word + * printed. + * + * For '--graph' to work with '--color-words', we need to output the graph prefix + * on each line of color words output. Generally, there are two conditions on + * which we should output the prefix. + * + * 1. diff_words->last_minus == 0 && + * diff_words->current_plus == diff_words->plus.text.ptr + * + * that is: the plus text must start as a new line, and if there is no minus + * word printed, a graph prefix must be printed. + * + * 2. diff_words->current_plus > diff_words->plus.text.ptr && + * *(diff_words->current_plus - 1) == '\n' + * + * that is: a graph prefix must be printed following a '\n' + */ +static int color_words_output_graph_prefix(struct diff_words_data *diff_words) +{ + if ((diff_words->last_minus == 0 && + diff_words->current_plus == diff_words->plus.text.ptr) || + (diff_words->current_plus > diff_words->plus.text.ptr && + *(diff_words->current_plus - 1) == '\n')) { + return 1; + } else { + return 0; + } +} + static void fn_out_diff_words_aux(void *priv, char *line, unsigned long len) { struct diff_words_data *diff_words = priv; struct diff_words_style *style = diff_words->style; int minus_first, minus_len, plus_first, plus_len; const char *minus_begin, *minus_end, *plus_begin, *plus_end; + struct diff_options *opt = diff_words->opt; + struct strbuf *msgbuf; + char *line_prefix = ""; if (line[0] != '@' || parse_hunk_header(line, len, &minus_first, &minus_len, &plus_first, &plus_len)) return; + assert(opt); + if (opt->output_prefix) { + msgbuf = opt->output_prefix(opt, opt->output_prefix_data); + line_prefix = msgbuf->buf; + } + /* POSIX requires that first be decremented by one if len == 0... */ if (minus_len) { minus_begin = diff_words->minus.orig[minus_first].begin; @@ -644,21 +746,32 @@ static void fn_out_diff_words_aux(void *priv, char *line, unsigned long len) } else plus_begin = plus_end = diff_words->plus.orig[plus_first].end; - if (diff_words->current_plus != plus_begin) - fn_out_diff_words_write_helper(diff_words->file, + if (color_words_output_graph_prefix(diff_words)) { + fputs(line_prefix, diff_words->opt->file); + } + if (diff_words->current_plus != plus_begin) { + fn_out_diff_words_write_helper(diff_words->opt->file, &style->ctx, style->newline, plus_begin - diff_words->current_plus, - diff_words->current_plus); - if (minus_begin != minus_end) - fn_out_diff_words_write_helper(diff_words->file, + diff_words->current_plus, line_prefix); + if (*(plus_begin - 1) == '\n') + fputs(line_prefix, diff_words->opt->file); + } + if (minus_begin != minus_end) { + fn_out_diff_words_write_helper(diff_words->opt->file, &style->old, style->newline, - minus_end - minus_begin, minus_begin); - if (plus_begin != plus_end) - fn_out_diff_words_write_helper(diff_words->file, + minus_end - minus_begin, minus_begin, + line_prefix); + } + if (plus_begin != plus_end) { + fn_out_diff_words_write_helper(diff_words->opt->file, &style->new, style->newline, - plus_end - plus_begin, plus_begin); + plus_end - plus_begin, plus_begin, + line_prefix); + } diff_words->current_plus = plus_end; + diff_words->last_minus = minus_first; } /* This function starts looking at *begin, and returns 0 iff a word was found. */ @@ -739,22 +852,35 @@ static void diff_words_show(struct diff_words_data *diff_words) mmfile_t minus, plus; struct diff_words_style *style = diff_words->style; + struct diff_options *opt = diff_words->opt; + struct strbuf *msgbuf; + char *line_prefix = ""; + + assert(opt); + if (opt->output_prefix) { + msgbuf = opt->output_prefix(opt, opt->output_prefix_data); + line_prefix = msgbuf->buf; + } + /* special case: only removal */ if (!diff_words->plus.text.size) { - fn_out_diff_words_write_helper(diff_words->file, + fputs(line_prefix, diff_words->opt->file); + fn_out_diff_words_write_helper(diff_words->opt->file, &style->old, style->newline, - diff_words->minus.text.size, diff_words->minus.text.ptr); + diff_words->minus.text.size, + diff_words->minus.text.ptr, line_prefix); diff_words->minus.text.size = 0; return; } diff_words->current_plus = diff_words->plus.text.ptr; + diff_words->last_minus = 0; memset(&xpp, 0, sizeof(xpp)); memset(&xecfg, 0, sizeof(xecfg)); diff_words_fill(&diff_words->minus, &minus, diff_words->word_regex); diff_words_fill(&diff_words->plus, &plus, diff_words->word_regex); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; /* as only the hunk header will be parsed, we need a 0-context */ xecfg.ctxlen = 0; xdi_diff_outf(&minus, &plus, fn_out_diff_words_aux, diff_words, @@ -762,11 +888,15 @@ static void diff_words_show(struct diff_words_data *diff_words) free(minus.ptr); free(plus.ptr); if (diff_words->current_plus != diff_words->plus.text.ptr + - diff_words->plus.text.size) - fn_out_diff_words_write_helper(diff_words->file, + diff_words->plus.text.size) { + if (color_words_output_graph_prefix(diff_words)) + fputs(line_prefix, diff_words->opt->file); + fn_out_diff_words_write_helper(diff_words->opt->file, &style->ctx, style->newline, diff_words->plus.text.ptr + diff_words->plus.text.size - - diff_words->current_plus, diff_words->current_plus); + - diff_words->current_plus, diff_words->current_plus, + line_prefix); + } diff_words->minus.text.size = diff_words->plus.text.size = 0; } @@ -838,9 +968,17 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) const char *meta = diff_get_color(ecbdata->color_diff, DIFF_METAINFO); const char *plain = diff_get_color(ecbdata->color_diff, DIFF_PLAIN); const char *reset = diff_get_color(ecbdata->color_diff, DIFF_RESET); + struct diff_options *o = ecbdata->opt; + char *line_prefix = ""; + struct strbuf *msgbuf; + + if (o && o->output_prefix) { + msgbuf = o->output_prefix(o, o->output_prefix_data); + line_prefix = msgbuf->buf; + } if (ecbdata->header) { - fprintf(ecbdata->file, "%s", ecbdata->header->buf); + fprintf(ecbdata->opt->file, "%s", ecbdata->header->buf); strbuf_reset(ecbdata->header); ecbdata->header = NULL; } @@ -852,10 +990,10 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) name_a_tab = strchr(ecbdata->label_path[0], ' ') ? "\t" : ""; name_b_tab = strchr(ecbdata->label_path[1], ' ') ? "\t" : ""; - fprintf(ecbdata->file, "%s--- %s%s%s\n", - meta, ecbdata->label_path[0], reset, name_a_tab); - fprintf(ecbdata->file, "%s+++ %s%s%s\n", - meta, ecbdata->label_path[1], reset, name_b_tab); + fprintf(ecbdata->opt->file, "%s%s--- %s%s%s\n", + line_prefix, meta, ecbdata->label_path[0], reset, name_a_tab); + fprintf(ecbdata->opt->file, "%s%s+++ %s%s%s\n", + line_prefix, meta, ecbdata->label_path[1], reset, name_b_tab); ecbdata->label_path[0] = ecbdata->label_path[1] = NULL; } @@ -872,15 +1010,15 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) find_lno(line, ecbdata); emit_hunk_header(ecbdata, line, len); if (line[len-1] != '\n') - putc('\n', ecbdata->file); + putc('\n', ecbdata->opt->file); return; } if (len < 1) { - emit_line(ecbdata->file, reset, reset, line, len); + emit_line(ecbdata->opt, reset, reset, line, len); if (ecbdata->diff_words && ecbdata->diff_words->type == DIFF_WORDS_PORCELAIN) - fputs("~\n", ecbdata->file); + fputs("~\n", ecbdata->opt->file); return; } @@ -896,11 +1034,11 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) } diff_words_flush(ecbdata); if (ecbdata->diff_words->type == DIFF_WORDS_PORCELAIN) { - emit_line(ecbdata->file, plain, reset, line, len); - fputs("~\n", ecbdata->file); + emit_line(ecbdata->opt, plain, reset, line, len); + fputs("~\n", ecbdata->opt->file); } else { /* don't print the prefix character */ - emit_line(ecbdata->file, plain, reset, line+1, len-1); + emit_line(ecbdata->opt, plain, reset, line+1, len-1); } return; } @@ -912,7 +1050,7 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) ecbdata->lno_in_preimage++; if (line[0] == ' ') ecbdata->lno_in_postimage++; - emit_line(ecbdata->file, color, reset, line, len); + emit_line(ecbdata->opt, color, reset, line, len); } else { ecbdata->lno_in_postimage++; emit_add_line(reset, ecbdata, line + 1, len - 1); @@ -1092,10 +1230,17 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) int total_files = data->nr; int width, name_width; const char *reset, *set, *add_c, *del_c; + const char *line_prefix = ""; + struct strbuf *msg = NULL; if (data->nr == 0) return; + if (options->output_prefix) { + msg = options->output_prefix(options, options->output_prefix_data); + line_prefix = msg->buf; + } + width = options->stat_width ? options->stat_width : 80; name_width = options->stat_name_width ? options->stat_name_width : 50; @@ -1165,6 +1310,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) } if (data->files[i]->is_binary) { + fprintf(options->file, "%s", line_prefix); show_name(options->file, prefix, name, len); fprintf(options->file, " Bin "); fprintf(options->file, "%s%"PRIuMAX"%s", @@ -1177,6 +1323,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) continue; } else if (data->files[i]->is_unmerged) { + fprintf(options->file, "%s", line_prefix); show_name(options->file, prefix, name, len); fprintf(options->file, " Unmerged\n"); continue; @@ -1199,6 +1346,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) add = scale_linear(add, width, max_change); del = scale_linear(del, width, max_change); } + fprintf(options->file, "%s", line_prefix); show_name(options->file, prefix, name, len); fprintf(options->file, "%5"PRIuMAX"%s", added + deleted, added + deleted ? " " : ""); @@ -1206,6 +1354,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) show_graph(options->file, '-', del, del_c, reset); fprintf(options->file, "\n"); } + fprintf(options->file, "%s", line_prefix); fprintf(options->file, " %d files changed, %d insertions(+), %d deletions(-)\n", total_files, adds, dels); @@ -1232,6 +1381,12 @@ static void show_shortstats(struct diffstat_t *data, struct diff_options *option } } } + if (options->output_prefix) { + struct strbuf *msg = NULL; + msg = options->output_prefix(options, + options->output_prefix_data); + fprintf(options->file, "%s", msg->buf); + } fprintf(options->file, " %d files changed, %d insertions(+), %d deletions(-)\n", total_files, adds, dels); } @@ -1246,6 +1401,13 @@ static void show_numstat(struct diffstat_t *data, struct diff_options *options) for (i = 0; i < data->nr; i++) { struct diffstat_file *file = data->files[i]; + if (options->output_prefix) { + struct strbuf *msg = NULL; + msg = options->output_prefix(options, + options->output_prefix_data); + fprintf(options->file, "%s", msg->buf); + } + if (file->is_binary) fprintf(options->file, "-\t-\t"); else @@ -1281,10 +1443,18 @@ struct dirstat_dir { int alloc, nr, percent, cumulative; }; -static long gather_dirstat(FILE *file, struct dirstat_dir *dir, unsigned long changed, const char *base, int baselen) +static long gather_dirstat(struct diff_options *opt, struct dirstat_dir *dir, + unsigned long changed, const char *base, int baselen) { unsigned long this_dir = 0; unsigned int sources = 0; + const char *line_prefix = ""; + struct strbuf *msg = NULL; + + if (opt->output_prefix) { + msg = opt->output_prefix(opt, opt->output_prefix_data); + line_prefix = msg->buf; + } while (dir->nr) { struct dirstat_file *f = dir->files; @@ -1299,7 +1469,7 @@ static long gather_dirstat(FILE *file, struct dirstat_dir *dir, unsigned long ch slash = strchr(f->name + baselen, '/'); if (slash) { int newbaselen = slash + 1 - f->name; - this = gather_dirstat(file, dir, changed, f->name, newbaselen); + this = gather_dirstat(opt, dir, changed, f->name, newbaselen); sources++; } else { this = f->changed; @@ -1321,7 +1491,8 @@ static long gather_dirstat(FILE *file, struct dirstat_dir *dir, unsigned long ch if (permille) { int percent = permille / 10; if (percent >= dir->percent) { - fprintf(file, "%4d.%01d%% %.*s\n", percent, permille % 10, baselen, base); + fprintf(opt->file, "%s%4d.%01d%% %.*s\n", line_prefix, + percent, permille % 10, baselen, base); if (!dir->cumulative) return 0; } @@ -1401,7 +1572,7 @@ static void show_dirstat(struct diff_options *options) /* Show all directories with more than x% of the changes */ qsort(dir.files, dir.nr, sizeof(dir.files[0]), dirstat_compare); - gather_dirstat(options->file, &dir, changed, "", 0); + gather_dirstat(options, &dir, changed, "", 0); } static void free_diffstat_info(struct diffstat_t *diffstat) @@ -1459,6 +1630,15 @@ static void checkdiff_consume(void *priv, char *line, unsigned long len) const char *reset = diff_get_color(color_diff, DIFF_RESET); const char *set = diff_get_color(color_diff, DIFF_FILE_NEW); char *err; + char *line_prefix = ""; + struct strbuf *msgbuf; + + assert(data->o); + if (data->o->output_prefix) { + msgbuf = data->o->output_prefix(data->o, + data->o->output_prefix_data); + line_prefix = msgbuf->buf; + } if (line[0] == '+') { unsigned bad; @@ -1466,18 +1646,18 @@ static void checkdiff_consume(void *priv, char *line, unsigned long len) if (is_conflict_marker(line + 1, marker_size, len - 1)) { data->status |= 1; fprintf(data->o->file, - "%s:%d: leftover conflict marker\n", - data->filename, data->lineno); + "%s%s:%d: leftover conflict marker\n", + line_prefix, data->filename, data->lineno); } bad = ws_check(line + 1, len - 1, data->ws_rule); if (!bad) return; data->status |= bad; err = whitespace_error_string(bad); - fprintf(data->o->file, "%s:%d: %s.\n", - data->filename, data->lineno, err); + fprintf(data->o->file, "%s%s:%d: %s.\n", + line_prefix, data->filename, data->lineno, err); free(err); - emit_line(data->o->file, set, reset, line, 1); + emit_line(data->o, set, reset, line, 1); ws_check_emit(line + 1, len - 1, data->ws_rule, data->o->file, set, reset, ws); } else if (line[0] == ' ') { @@ -1515,7 +1695,7 @@ static unsigned char *deflate_it(char *data, return deflated; } -static void emit_binary_diff_body(FILE *file, mmfile_t *one, mmfile_t *two) +static void emit_binary_diff_body(FILE *file, mmfile_t *one, mmfile_t *two, char *prefix) { void *cp; void *delta; @@ -1544,13 +1724,13 @@ static void emit_binary_diff_body(FILE *file, mmfile_t *one, mmfile_t *two) } if (delta && delta_size < deflate_size) { - fprintf(file, "delta %lu\n", orig_size); + fprintf(file, "%sdelta %lu\n", prefix, orig_size); free(deflated); data = delta; data_size = delta_size; } else { - fprintf(file, "literal %lu\n", two->size); + fprintf(file, "%sliteral %lu\n", prefix, two->size); free(delta); data = deflated; data_size = deflate_size; @@ -1568,18 +1748,19 @@ static void emit_binary_diff_body(FILE *file, mmfile_t *one, mmfile_t *two) line[0] = bytes - 26 + 'a' - 1; encode_85(line + 1, cp, bytes); cp = (char *) cp + bytes; + fprintf(file, "%s", prefix); fputs(line, file); fputc('\n', file); } - fprintf(file, "\n"); + fprintf(file, "%s\n", prefix); free(data); } -static void emit_binary_diff(FILE *file, mmfile_t *one, mmfile_t *two) +static void emit_binary_diff(FILE *file, mmfile_t *one, mmfile_t *two, char *prefix) { - fprintf(file, "GIT binary patch\n"); - emit_binary_diff_body(file, one, two); - emit_binary_diff_body(file, two, one); + fprintf(file, "%sGIT binary patch\n", prefix); + emit_binary_diff_body(file, one, two, prefix); + emit_binary_diff_body(file, two, one, prefix); } static void diff_filespec_load_driver(struct diff_filespec *one) @@ -1656,6 +1837,7 @@ static void builtin_diff(const char *name_a, struct diff_filespec *one, struct diff_filespec *two, const char *xfrm_msg, + int must_show_header, struct diff_options *o, int complete_rewrite) { @@ -1668,6 +1850,13 @@ static void builtin_diff(const char *name_a, struct userdiff_driver *textconv_one = NULL; struct userdiff_driver *textconv_two = NULL; struct strbuf header = STRBUF_INIT; + struct strbuf *msgbuf; + char *line_prefix = ""; + + if (o->output_prefix) { + msgbuf = o->output_prefix(o, o->output_prefix_data); + line_prefix = msgbuf->buf; + } if (DIFF_OPT_TST(o, SUBMODULE_LOG) && (!one->mode || S_ISGITLINK(one->mode)) && @@ -1702,25 +1891,28 @@ static void builtin_diff(const char *name_a, b_two = quote_two(b_prefix, name_b + (*name_b == '/')); lbl[0] = DIFF_FILE_VALID(one) ? a_one : "/dev/null"; lbl[1] = DIFF_FILE_VALID(two) ? b_two : "/dev/null"; - strbuf_addf(&header, "%sdiff --git %s %s%s\n", set, a_one, b_two, reset); + strbuf_addf(&header, "%s%sdiff --git %s %s%s\n", line_prefix, set, a_one, b_two, reset); if (lbl[0][0] == '/') { /* /dev/null */ - strbuf_addf(&header, "%snew file mode %06o%s\n", set, two->mode, reset); - if (xfrm_msg && xfrm_msg[0]) - strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset); + strbuf_addf(&header, "%s%snew file mode %06o%s\n", line_prefix, set, two->mode, reset); + if (xfrm_msg) + strbuf_addstr(&header, xfrm_msg); + must_show_header = 1; } else if (lbl[1][0] == '/') { - strbuf_addf(&header, "%sdeleted file mode %06o%s\n", set, one->mode, reset); - if (xfrm_msg && xfrm_msg[0]) - strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset); + strbuf_addf(&header, "%s%sdeleted file mode %06o%s\n", line_prefix, set, one->mode, reset); + if (xfrm_msg) + strbuf_addstr(&header, xfrm_msg); + must_show_header = 1; } else { if (one->mode != two->mode) { - strbuf_addf(&header, "%sold mode %06o%s\n", set, one->mode, reset); - strbuf_addf(&header, "%snew mode %06o%s\n", set, two->mode, reset); + strbuf_addf(&header, "%s%sold mode %06o%s\n", line_prefix, set, one->mode, reset); + strbuf_addf(&header, "%s%snew mode %06o%s\n", line_prefix, set, two->mode, reset); + must_show_header = 1; } - if (xfrm_msg && xfrm_msg[0]) - strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset); + if (xfrm_msg) + strbuf_addstr(&header, xfrm_msg); /* * we do not run diff between different kind @@ -1747,15 +1939,18 @@ static void builtin_diff(const char *name_a, die("unable to read files to diff"); /* Quite common confusing case */ if (mf1.size == mf2.size && - !memcmp(mf1.ptr, mf2.ptr, mf1.size)) + !memcmp(mf1.ptr, mf2.ptr, mf1.size)) { + if (must_show_header) + fprintf(o->file, "%s", header.buf); goto free_ab_and_return; + } fprintf(o->file, "%s", header.buf); strbuf_reset(&header); if (DIFF_OPT_TST(o, BINARY)) - emit_binary_diff(o->file, &mf1, &mf2); + emit_binary_diff(o->file, &mf1, &mf2, line_prefix); else - fprintf(o->file, "Binary files %s and %s differ\n", - lbl[0], lbl[1]); + fprintf(o->file, "%sBinary files %s and %s differ\n", + line_prefix, lbl[0], lbl[1]); o->found_changes = 1; } else { @@ -1766,7 +1961,7 @@ static void builtin_diff(const char *name_a, struct emit_callback ecbdata; const struct userdiff_funcname *pe; - if (!DIFF_XDL_TST(o, WHITESPACE_FLAGS)) { + if (!DIFF_XDL_TST(o, WHITESPACE_FLAGS) || must_show_header) { fprintf(o->file, "%s", header.buf); strbuf_reset(&header); } @@ -1787,9 +1982,9 @@ static void builtin_diff(const char *name_a, ecbdata.ws_rule = whitespace_rule(name_b ? name_b : name_a); if (ecbdata.ws_rule & WS_BLANK_AT_EOF) check_blank_at_eof(&mf1, &mf2, &ecbdata); - ecbdata.file = o->file; + ecbdata.opt = o; ecbdata.header = header.len ? &header : NULL; - xpp.flags = XDF_NEED_MINIMAL | o->xdl_opts; + xpp.flags = o->xdl_opts; xecfg.ctxlen = o->context; xecfg.interhunkctxlen = o->interhunkcontext; xecfg.flags = XDL_EMIT_FUNCNAMES; @@ -1806,8 +2001,8 @@ static void builtin_diff(const char *name_a, ecbdata.diff_words = xcalloc(1, sizeof(struct diff_words_data)); - ecbdata.diff_words->file = o->file; ecbdata.diff_words->type = o->word_diff; + ecbdata.diff_words->opt = o; if (!o->word_regex) o->word_regex = userdiff_word_regex(one); if (!o->word_regex) @@ -1894,7 +2089,7 @@ static void builtin_diffstat(const char *name_a, const char *name_b, memset(&xpp, 0, sizeof(xpp)); memset(&xecfg, 0, sizeof(xecfg)); - xpp.flags = XDF_NEED_MINIMAL | o->xdl_opts; + xpp.flags = o->xdl_opts; xdi_diff_outf(&mf1, &mf2, diffstat_consume, diffstat, &xpp, &xecfg); } @@ -1942,7 +2137,7 @@ static void builtin_checkdiff(const char *name_a, const char *name_b, memset(&xpp, 0, sizeof(xpp)); memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 1; /* at least one context line */ - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; xdi_diff_outf(&mf1, &mf2, checkdiff_consume, &data, &xpp, &xecfg); @@ -2379,36 +2574,54 @@ static void fill_metainfo(struct strbuf *msg, struct diff_filespec *one, struct diff_filespec *two, struct diff_options *o, - struct diff_filepair *p) + struct diff_filepair *p, + int *must_show_header, + int use_color) { + const char *set = diff_get_color(use_color, DIFF_METAINFO); + const char *reset = diff_get_color(use_color, DIFF_RESET); + struct strbuf *msgbuf; + char *line_prefix = ""; + + *must_show_header = 1; + if (o->output_prefix) { + msgbuf = o->output_prefix(o, o->output_prefix_data); + line_prefix = msgbuf->buf; + } strbuf_init(msg, PATH_MAX * 2 + 300); switch (p->status) { case DIFF_STATUS_COPIED: - strbuf_addf(msg, "similarity index %d%%", similarity_index(p)); - strbuf_addstr(msg, "\ncopy from "); + strbuf_addf(msg, "%s%ssimilarity index %d%%", + line_prefix, set, similarity_index(p)); + strbuf_addf(msg, "%s\n%s%scopy from ", + reset, line_prefix, set); quote_c_style(name, msg, NULL, 0); - strbuf_addstr(msg, "\ncopy to "); + strbuf_addf(msg, "%s\n%s%scopy to ", reset, line_prefix, set); quote_c_style(other, msg, NULL, 0); - strbuf_addch(msg, '\n'); + strbuf_addf(msg, "%s\n", reset); break; case DIFF_STATUS_RENAMED: - strbuf_addf(msg, "similarity index %d%%", similarity_index(p)); - strbuf_addstr(msg, "\nrename from "); + strbuf_addf(msg, "%s%ssimilarity index %d%%", + line_prefix, set, similarity_index(p)); + strbuf_addf(msg, "%s\n%s%srename from ", + reset, line_prefix, set); quote_c_style(name, msg, NULL, 0); - strbuf_addstr(msg, "\nrename to "); + strbuf_addf(msg, "%s\n%s%srename to ", + reset, line_prefix, set); quote_c_style(other, msg, NULL, 0); - strbuf_addch(msg, '\n'); + strbuf_addf(msg, "%s\n", reset); break; case DIFF_STATUS_MODIFIED: if (p->score) { - strbuf_addf(msg, "dissimilarity index %d%%\n", - similarity_index(p)); + strbuf_addf(msg, "%s%sdissimilarity index %d%%%s\n", + line_prefix, + set, similarity_index(p), reset); break; } /* fallthru */ default: /* nothing */ - ; + *must_show_header = 0; } if (one && two && hashcmp(one->sha1, two->sha1)) { int abbrev = DIFF_OPT_TST(o, FULL_INDEX) ? 40 : DEFAULT_ABBREV; @@ -2419,15 +2632,14 @@ static void fill_metainfo(struct strbuf *msg, (!fill_mmfile(&mf, two) && diff_filespec_is_binary(two))) abbrev = 40; } - strbuf_addf(msg, "index %.*s..%.*s", - abbrev, sha1_to_hex(one->sha1), - abbrev, sha1_to_hex(two->sha1)); + strbuf_addf(msg, "%s%sindex %s..", set, + line_prefix, + find_unique_abbrev(one->sha1, abbrev)); + strbuf_addstr(msg, find_unique_abbrev(two->sha1, abbrev)); if (one->mode == two->mode) strbuf_addf(msg, " %06o", one->mode); - strbuf_addch(msg, '\n'); + strbuf_addf(msg, "%s\n", reset); } - if (msg->len) - strbuf_setlen(msg, msg->len - 1); } static void run_diff_cmd(const char *pgm, @@ -2442,11 +2654,7 @@ static void run_diff_cmd(const char *pgm, { const char *xfrm_msg = NULL; int complete_rewrite = (p->status == DIFF_STATUS_MODIFIED) && p->score; - - if (msg) { - fill_metainfo(msg, name, other, one, two, o, p); - xfrm_msg = msg->len ? msg->buf : NULL; - } + int must_show_header = 0; if (!DIFF_OPT_TST(o, ALLOW_EXTERNAL)) pgm = NULL; @@ -2456,6 +2664,17 @@ static void run_diff_cmd(const char *pgm, pgm = drv->external; } + if (msg) { + /* + * don't use colors when the header is intended for an + * external diff driver + */ + fill_metainfo(msg, name, other, one, two, o, p, + &must_show_header, + DIFF_OPT_TST(o, COLOR_DIFF) && !pgm); + xfrm_msg = msg->len ? msg->buf : NULL; + } + if (pgm) { run_external_diff(pgm, name, other, one, two, xfrm_msg, complete_rewrite); @@ -2463,7 +2682,8 @@ static void run_diff_cmd(const char *pgm, } if (one && two) builtin_diff(name, other ? other : name, - one, two, xfrm_msg, o, complete_rewrite); + one, two, xfrm_msg, must_show_header, + o, complete_rewrite); else fprintf(o->file, "* Unmerged path %s\n", name); } @@ -2616,7 +2836,9 @@ void diff_setup(struct diff_options *options) DIFF_OPT_SET(options, COLOR_DIFF); options->detect_rename = diff_detect_rename_default; - if (!diff_mnemonic_prefix) { + if (diff_no_prefix) { + options->a_prefix = options->b_prefix = ""; + } else if (!diff_mnemonic_prefix) { options->a_prefix = "a/"; options->b_prefix = "b/"; } @@ -3124,6 +3346,11 @@ static void diff_flush_raw(struct diff_filepair *p, struct diff_options *opt) { int line_termination = opt->line_termination; int inter_name_termination = line_termination ? '\t' : '\0'; + if (opt->output_prefix) { + struct strbuf *msg = NULL; + msg = opt->output_prefix(opt, opt->output_prefix_data); + fprintf(opt->file, "%s", msg->buf); + } if (!(opt->output_format & DIFF_FORMAT_NAME_STATUS)) { fprintf(opt->file, ":%06o %06o %s ", p->one->mode, p->two->mode, @@ -3369,48 +3596,62 @@ static void show_file_mode_name(FILE *file, const char *newdelete, struct diff_f } -static void show_mode_change(FILE *file, struct diff_filepair *p, int show_name) +static void show_mode_change(FILE *file, struct diff_filepair *p, int show_name, + const char *line_prefix) { if (p->one->mode && p->two->mode && p->one->mode != p->two->mode) { - fprintf(file, " mode change %06o => %06o%c", p->one->mode, p->two->mode, - show_name ? ' ' : '\n'); + fprintf(file, "%s mode change %06o => %06o%c", line_prefix, p->one->mode, + p->two->mode, show_name ? ' ' : '\n'); if (show_name) { write_name_quoted(p->two->path, file, '\n'); } } } -static void show_rename_copy(FILE *file, const char *renamecopy, struct diff_filepair *p) +static void show_rename_copy(FILE *file, const char *renamecopy, struct diff_filepair *p, + const char *line_prefix) { char *names = pprint_rename(p->one->path, p->two->path); fprintf(file, " %s %s (%d%%)\n", renamecopy, names, similarity_index(p)); free(names); - show_mode_change(file, p, 0); + show_mode_change(file, p, 0, line_prefix); } -static void diff_summary(FILE *file, struct diff_filepair *p) +static void diff_summary(struct diff_options *opt, struct diff_filepair *p) { + FILE *file = opt->file; + char *line_prefix = ""; + + if (opt->output_prefix) { + struct strbuf *buf = opt->output_prefix(opt, opt->output_prefix_data); + line_prefix = buf->buf; + } + switch(p->status) { case DIFF_STATUS_DELETED: + fputs(line_prefix, file); show_file_mode_name(file, "delete", p->one); break; case DIFF_STATUS_ADDED: + fputs(line_prefix, file); show_file_mode_name(file, "create", p->two); break; case DIFF_STATUS_COPIED: - show_rename_copy(file, "copy", p); + fputs(line_prefix, file); + show_rename_copy(file, "copy", p, line_prefix); break; case DIFF_STATUS_RENAMED: - show_rename_copy(file, "rename", p); + fputs(line_prefix, file); + show_rename_copy(file, "rename", p, line_prefix); break; default: if (p->score) { - fputs(" rewrite ", file); + fprintf(file, "%s rewrite ", line_prefix); write_name_quoted(p->two->path, file, ' '); fprintf(file, "(%d%%)\n", similarity_index(p)); } - show_mode_change(file, p, !p->score); + show_mode_change(file, p, !p->score, line_prefix); break; } } @@ -3521,7 +3762,7 @@ static int diff_get_patch_id(struct diff_options *options, unsigned char *sha1) len2, p->two->path); git_SHA1_Update(&ctx, buffer, len1); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; xecfg.ctxlen = 3; xecfg.flags = XDL_EMIT_FUNCNAMES; xdi_diff_outf(&mf1, &mf2, patch_id_consume, &data, @@ -3619,8 +3860,9 @@ void diff_flush(struct diff_options *options) show_dirstat(options); if (output_format & DIFF_FORMAT_SUMMARY && !is_summary_empty(q)) { - for (i = 0; i < q->nr; i++) - diff_summary(options->file, q->queue[i]); + for (i = 0; i < q->nr; i++) { + diff_summary(options, q->queue[i]); + } separator++; } @@ -9,6 +9,7 @@ struct rev_info; struct diff_options; struct diff_queue_struct; +struct strbuf; typedef void (*change_fn_t)(struct diff_options *options, unsigned old_mode, unsigned new_mode, @@ -25,6 +26,8 @@ typedef void (*add_remove_fn_t)(struct diff_options *options, typedef void (*diff_format_fn_t)(struct diff_queue_struct *q, struct diff_options *options, void *data); +typedef struct strbuf *(*diff_prefix_fn_t)(struct diff_options *opt, void *data); + #define DIFF_FORMAT_RAW 0x0001 #define DIFF_FORMAT_DIFFSTAT 0x0002 #define DIFF_FORMAT_NUMSTAT 0x0004 @@ -130,6 +133,8 @@ struct diff_options { add_remove_fn_t add_remove; diff_format_fn_t format_callback; void *format_callback_data; + diff_prefix_fn_t output_prefix; + void *output_prefix_data; }; enum color_diff { @@ -958,9 +958,14 @@ char *get_relative_cwd(char *buffer, int size, const char *dir) } if (*dir) return NULL; - if (*cwd == '/') + switch (*cwd) { + case '\0': + return cwd; + case '/': return cwd + 1; - return cwd; + default: + return NULL; + } } int is_inside_dir(const char *dir) @@ -311,8 +311,6 @@ static int fsck_commit(struct commit *commit, fsck_error error_func) err = fsck_ident(&buffer, &commit->object, error_func); if (err) return err; - if (*buffer != '\n') - return error_func(&commit->object, FSCK_ERROR, "invalid format - expected blank line"); if (!commit->tree) return error_func(&commit->object, FSCK_ERROR, "could not load commit's tree %s", sha1_to_hex(tree_sha1)); diff --git a/git-add--interactive.perl b/git-add--interactive.perl index 21f1330a5b..27fc79347a 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -1111,9 +1111,9 @@ sub help_patch_cmd { print colored $help_color, <<EOF ; y - $verb this hunk$target n - do not $verb this hunk$target -q - quit, do not $verb this hunk nor any of the remaining ones -a - $verb this and all the remaining hunks in the file -d - do not $verb this hunk nor any of the remaining hunks in the file +q - quit; do not $verb this hunk nor any of the remaining ones +a - $verb this hunk and all later hunks in the file +d - do not $verb this hunk nor any of the later hunks in the file g - select a hunk to go to / - search for a hunk matching the given regex j - leave this hunk undecided, see next undecided hunk @@ -52,6 +52,16 @@ else HAS_HEAD= fi +cmdline="git am" +if test '' != "$interactive" +then + cmdline="$cmdline -i" +fi +if test '' != "$threeway" +then + cmdline="$cmdline -3" +fi + sq () { git rev-parse --sq-quote "$@" } @@ -66,15 +76,6 @@ stop_here_user_resolve () { printf '%s\n' "$resolvemsg" stop_here $1 fi - cmdline="git am" - if test '' != "$interactive" - then - cmdline="$cmdline -i" - fi - if test '' != "$threeway" - then - cmdline="$cmdline -3" - fi echo "When you have resolved this problem run \"$cmdline --resolved\"." echo "If you would prefer to skip this patch, instead run \"$cmdline --skip\"." echo "To restore the original branch and stop patching run \"$cmdline --abort\"." @@ -591,6 +592,8 @@ do test -s "$dotest/patch" || { echo "Patch is empty. Was it split wrong?" + echo "If you would prefer to skip this patch, instead run \"$cmdline --skip\"." + echo "To restore the original branch and stop patching run \"$cmdline --abort\"." stop_here $this } rm -f "$dotest/original-commit" @@ -690,7 +693,13 @@ do else action=yes fi - FIRSTLINE=$(sed 1q "$dotest/final-commit") + + if test -f "$dotest/final-commit" + then + FIRSTLINE=$(sed 1q "$dotest/final-commit") + else + FIRSTLINE="" + fi if test $action = skip then @@ -726,6 +735,8 @@ do resolved= git diff-index --quiet --cached HEAD -- && { echo "No changes - did you forget to use 'git add'?" + echo "If there is nothing left to stage, chances are that something else" + echo "already introduced the same changes; you might want to skip this patch." stop_here_user_resolve $this } unmerged=$(git ls-files -u) diff --git a/git-compat-util.h b/git-compat-util.h index edf352dee2..81ceb7f906 100644 --- a/git-compat-util.h +++ b/git-compat-util.h @@ -56,7 +56,7 @@ # define _XOPEN_SOURCE 500 # endif #elif !defined(__APPLE__) && !defined(__FreeBSD__) && !defined(__USLC__) && \ - !defined(_M_UNIX) && !defined(sgi) && !defined(__DragonFly__) + !defined(_M_UNIX) && !defined(__sgi) && !defined(__DragonFly__) #define _XOPEN_SOURCE 600 /* glibc2 and AIX 5.3L need 500, OpenBSD needs 600 for S_ISLNK() */ #define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */ #endif @@ -363,7 +363,8 @@ static inline void *gitmempcpy(void *dest, const void *src, size_t n) extern void release_pack_memory(size_t, int); -extern void set_try_to_free_routine(void (*routine)(size_t)); +typedef void (*try_to_free_t)(size_t); +extern try_to_free_t set_try_to_free_routine(try_to_free_t); extern char *xstrdup(const char *str); extern void *xmalloc(size_t size); diff --git a/git-cvsserver.perl b/git-cvsserver.perl index 13751db882..0f45c39509 100755 --- a/git-cvsserver.perl +++ b/git-cvsserver.perl @@ -183,12 +183,58 @@ if ($state->{method} eq 'pserver') { exit 1; } $line = <STDIN>; chomp $line; - unless ($line eq 'anonymous') { - print "E Only anonymous user allowed via pserver\n"; - print "I HATE YOU\n"; - exit 1; + my $user = $line; + $line = <STDIN>; chomp $line; + my $password = $line; + + if ($user eq 'anonymous') { + # "A" will be 1 byte, use length instead in case the + # encryption method ever changes (yeah, right!) + if (length($password) > 1 ) { + print "E Don't supply a password for the `anonymous' user\n"; + print "I HATE YOU\n"; + exit 1; + } + + # Fall through to LOVE + } else { + # Trying to authenticate a user + if (not exists $cfg->{gitcvs}->{authdb}) { + print "E the repo config file needs a [gitcvs] section with an 'authdb' parameter set to the filename of the authentication database\n"; + print "I HATE YOU\n"; + exit 1; + } + + my $authdb = $cfg->{gitcvs}->{authdb}; + + unless (-e $authdb) { + print "E The authentication database specified in [gitcvs.authdb] does not exist\n"; + print "I HATE YOU\n"; + exit 1; + } + + my $auth_ok; + open my $passwd, "<", $authdb or die $!; + while (<$passwd>) { + if (m{^\Q$user\E:(.*)}) { + if (crypt($user, descramble($password)) eq $1) { + $auth_ok = 1; + } + }; + } + close $passwd; + + unless ($auth_ok) { + print "I HATE YOU\n"; + exit 1; + } + + # Fall through to LOVE } - $line = <STDIN>; chomp $line; # validate the password? + + # For checking whether the user is anonymous on commit + $state->{user} = $user; + $line = <STDIN>; chomp $line; unless ($line eq "END $request REQUEST") { die "E Do not understand $line -- expecting END $request REQUEST\n"; @@ -1271,9 +1317,9 @@ sub req_ci $log->info("req_ci : " . ( defined($data) ? $data : "[NULL]" )); - if ( $state->{method} eq 'pserver') + if ( $state->{method} eq 'pserver' and $state->{user} eq 'anonymous' ) { - print "error 1 pserver access cannot commit\n"; + print "error 1 anonymous user cannot commit via pserver\n"; cleanupWorkTree(); exit; } @@ -2586,6 +2632,43 @@ sub cvs_author $author; } + +sub descramble +{ + # This table is from src/scramble.c in the CVS source + my @SHIFTS = ( + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 114,120, 53, 79, 96,109, 72,108, 70, 64, 76, 67,116, 74, 68, 87, + 111, 52, 75,119, 49, 34, 82, 81, 95, 65,112, 86,118,110,122,105, + 41, 57, 83, 43, 46,102, 40, 89, 38,103, 45, 50, 42,123, 91, 35, + 125, 55, 54, 66,124,126, 59, 47, 92, 71,115, 78, 88,107,106, 56, + 36,121,117,104,101,100, 69, 73, 99, 63, 94, 93, 39, 37, 61, 48, + 58,113, 32, 90, 44, 98, 60, 51, 33, 97, 62, 77, 84, 80, 85,223, + 225,216,187,166,229,189,222,188,141,249,148,200,184,136,248,190, + 199,170,181,204,138,232,218,183,255,234,220,247,213,203,226,193, + 174,172,228,252,217,201,131,230,197,211,145,238,161,179,160,212, + 207,221,254,173,202,146,224,151,140,196,205,130,135,133,143,246, + 192,159,244,239,185,168,215,144,139,165,180,157,147,186,214,176, + 227,231,219,169,175,156,206,198,129,164,150,210,154,177,134,127, + 182,128,158,208,162,132,167,209,149,241,153,251,237,236,171,195, + 243,233,253,240,194,250,191,155,142,137,245,235,163,242,178,152 + ); + my ($str) = @_; + + # This should never happen, the same password format (A) has been + # used by CVS since the beginning of time + { + my $fmt = substr($str, 0, 1); + die "invalid password format `$fmt'" unless $fmt eq 'A'; + } + + my @str = unpack "C*", substr($str, 1); + my $ret = join '', map { chr $SHIFTS[$_] } @str; + return $ret; +} + + package GITCVS::log; #### diff --git a/git-instaweb.sh b/git-instaweb.sh index f6080149c2..6635fbefdf 100755 --- a/git-instaweb.sh +++ b/git-instaweb.sh @@ -24,6 +24,7 @@ restart restart the web server fqgitdir="$GIT_DIR" local="$(git config --bool --get instaweb.local)" httpd="$(git config --get instaweb.httpd)" +root="$(git config --get instaweb.gitwebdir)" port=$(git config --get instaweb.port) module_path="$(git config --get instaweb.modulepath)" @@ -34,6 +35,9 @@ conf="$GIT_DIR/gitweb/httpd.conf" # if installed, it doesn't need further configuration (module_path) test -z "$httpd" && httpd='lighttpd -f' +# Default is @@GITWEBDIR@@ +test -z "$root" && root='@@GITWEBDIR@@' + # any untaken local port will do... test -z "$port" && port=1234 @@ -46,6 +50,12 @@ resolve_full_httpd () { httpd="$httpd -f" fi ;; + *plackup*) + # server is started by running via generated gitweb.psgi in $fqgitdir/gitweb + full_httpd="$fqgitdir/gitweb/gitweb.psgi" + httpd_only="${httpd%% *}" # cut on first space + return + ;; esac httpd_only="$(echo $httpd | cut -f1 -d' ')" @@ -57,7 +67,7 @@ resolve_full_httpd () { # these days and those are not in most users $PATHs # in addition, we may have generated a server script # in $fqgitdir/gitweb. - for i in /usr/local/sbin /usr/sbin "$fqgitdir/gitweb" + for i in /usr/local/sbin /usr/sbin "$root" "$fqgitdir/gitweb" do if test -x "$i/$httpd_only" then @@ -83,8 +93,8 @@ start_httpd () { # don't quote $full_httpd, there can be arguments to it (-f) case "$httpd" in - *mongoose*) - #The mongoose server doesn't have a daemon mode so we'll have to fork it + *mongoose*|*plackup*) + #These servers don't have a daemon mode so we'll have to fork it $full_httpd "$fqgitdir/gitweb/httpd.conf" & #Save the pid before doing anything else (we'll print it later) pid=$! @@ -110,6 +120,20 @@ EOF stop_httpd () { test -f "$fqgitdir/pid" && kill $(cat "$fqgitdir/pid") + rm -f "$fqgitdir/pid" +} + +httpd_is_ready () { + "$PERL" -MIO::Socket::INET -e " +local \$| = 1; # turn on autoflush +exit if (IO::Socket::INET->new('127.0.0.1:$port')); +print 'Waiting for \'$httpd\' to start ..'; +do { + print '.'; + sleep(1); +} until (IO::Socket::INET->new('127.0.0.1:$port')); +print qq! (done)\n!; +" } while test $# != 0 @@ -159,8 +183,8 @@ done mkdir -p "$GIT_DIR/gitweb/tmp" GIT_EXEC_PATH="$(git --exec-path)" GIT_DIR="$fqgitdir" -export GIT_EXEC_PATH GIT_DIR - +GITWEB_CONFIG="$fqgitdir/gitweb/gitweb_config.perl" +export GIT_EXEC_PATH GIT_DIR GITWEB_CONFIG webrick_conf () { # generate a standalone server script in $fqgitdir/gitweb. @@ -192,7 +216,7 @@ EOF cat >"$conf" <<EOF :Port: $port -:DocumentRoot: "$fqgitdir/gitweb" +:DocumentRoot: "$root" :DirectoryIndex: ["gitweb.cgi"] :PidFile: "$fqgitdir/pid" EOF @@ -201,18 +225,18 @@ EOF lighttpd_conf () { cat > "$conf" <<EOF -server.document-root = "$fqgitdir/gitweb" +server.document-root = "$root" server.port = $port server.modules = ( "mod_setenv", "mod_cgi" ) server.indexfiles = ( "gitweb.cgi" ) server.pid-file = "$fqgitdir/pid" -server.errorlog = "$fqgitdir/gitweb/error.log" +server.errorlog = "$fqgitdir/gitweb/$httpd_only/error.log" # to enable, add "mod_access", "mod_accesslog" to server.modules # variable above and uncomment this -#accesslog.filename = "$fqgitdir/gitweb/access.log" +#accesslog.filename = "$fqgitdir/gitweb/$httpd_only/access.log" -setenv.add-environment = ( "PATH" => env.PATH ) +setenv.add-environment = ( "PATH" => env.PATH, "GITWEB_CONFIG" => env.GITWEB_CONFIG ) cgi.assign = ( ".cgi" => "" ) @@ -277,14 +301,15 @@ EOF apache2_conf () { test -z "$module_path" && module_path=/usr/lib/apache2/modules - mkdir -p "$GIT_DIR/gitweb/logs" bind= test x"$local" = xtrue && bind='127.0.0.1:' echo 'text/css css' > "$fqgitdir/mime.types" cat > "$conf" <<EOF ServerName "git-instaweb" -ServerRoot "$fqgitdir/gitweb" -DocumentRoot "$fqgitdir/gitweb" +ServerRoot "$root" +DocumentRoot "$root" +ErrorLog "$fqgitdir/gitweb/$httpd_only/error.log" +CustomLog "$fqgitdir/gitweb/$httpd_only/access.log" combined PidFile "$fqgitdir/pid" Listen $bind$port EOF @@ -303,13 +328,14 @@ EOF # check to see if Dennis Stosberg's mod_perl compatibility patch # (<20060621130708.Gcbc6e5c@leonov.stosberg.net>) has been applied if test -f "$module_path/mod_perl.so" && - sane_grep 'MOD_PERL' "$GIT_DIR/gitweb/gitweb.cgi" >/dev/null + sane_grep 'MOD_PERL' "$root/gitweb.cgi" >/dev/null then # favor mod_perl if available cat >> "$conf" <<EOF LoadModule perl_module $module_path/mod_perl.so PerlPassEnv GIT_DIR PerlPassEnv GIT_EXEC_DIR +PerlPassEnv GITWEB_CONFIG <Location /gitweb.cgi> SetHandler perl-script PerlResponseHandler ModPerl::Registry @@ -353,15 +379,15 @@ mongoose_conf() { # For detailed description of every option, visit # http://code.google.com/p/mongoose/wiki/MongooseManual -root $fqgitdir/gitweb +root $root ports $port index_files gitweb.cgi #ssl_cert $fqgitdir/gitweb/ssl_cert.pem -error_log $fqgitdir/gitweb/error.log -access_log $fqgitdir/gitweb/access.log +error_log $fqgitdir/gitweb/$httpd_only/error.log +access_log $fqgitdir/gitweb/$httpd_only/access.log #cgi setup -cgi_env PATH=$PATH,GIT_DIR=$GIT_DIR,GIT_EXEC_PATH=$GIT_EXEC_PATH +cgi_env PATH=$PATH,GIT_DIR=$GIT_DIR,GIT_EXEC_PATH=$GIT_EXEC_PATH,GITWEB_CONFIG=$GITWEB_CONFIG cgi_interp $PERL cgi_ext cgi,pl @@ -370,41 +396,165 @@ mime_types .gz=application/x-gzip,.tar.gz=application/x-tgz,.tgz=application/x-t EOF } - -script=' -s#^(my|our) \$projectroot =.*#$1 \$projectroot = "'$(dirname "$fqgitdir")'";#; -s#(my|our) \$gitbin =.*#$1 \$gitbin = "'$GIT_EXEC_PATH'";#; -s#(my|our) \$projects_list =.*#$1 \$projects_list = \$projectroot;#; -s#(my|our) \$git_temp =.*#$1 \$git_temp = "'$fqgitdir/gitweb/tmp'";#;' - -gitweb_cgi () { - cat > "$1.tmp" <<\EOFGITWEB -@@GITWEB_CGI@@ -EOFGITWEB - # Use the configured full path to perl to match the generated - # scripts' 'hashpling' line - "$PERL" -p -e "$script" "$1.tmp" > "$1" - chmod +x "$1" - rm -f "$1.tmp" +plackup_conf () { + # generate a standalone 'plackup' server script in $fqgitdir/gitweb + # with embedded configuration; it does not use "$conf" file + cat > "$fqgitdir/gitweb/gitweb.psgi" <<EOF +#!$PERL + +# gitweb - simple web interface to track changes in git repositories +# PSGI wrapper and server starter (see http://plackperl.org) + +use strict; + +use IO::Handle; +use Plack::MIME; +use Plack::Builder; +use Plack::App::WrapCGI; +use CGI::Emulate::PSGI 0.07; # minimum version required to work with gitweb + +# mimetype mapping (from lighttpd_conf) +Plack::MIME->add_type( + ".pdf" => "application/pdf", + ".sig" => "application/pgp-signature", + ".spl" => "application/futuresplash", + ".class" => "application/octet-stream", + ".ps" => "application/postscript", + ".torrent" => "application/x-bittorrent", + ".dvi" => "application/x-dvi", + ".gz" => "application/x-gzip", + ".pac" => "application/x-ns-proxy-autoconfig", + ".swf" => "application/x-shockwave-flash", + ".tar.gz" => "application/x-tgz", + ".tgz" => "application/x-tgz", + ".tar" => "application/x-tar", + ".zip" => "application/zip", + ".mp3" => "audio/mpeg", + ".m3u" => "audio/x-mpegurl", + ".wma" => "audio/x-ms-wma", + ".wax" => "audio/x-ms-wax", + ".ogg" => "application/ogg", + ".wav" => "audio/x-wav", + ".gif" => "image/gif", + ".jpg" => "image/jpeg", + ".jpeg" => "image/jpeg", + ".png" => "image/png", + ".xbm" => "image/x-xbitmap", + ".xpm" => "image/x-xpixmap", + ".xwd" => "image/x-xwindowdump", + ".css" => "text/css", + ".html" => "text/html", + ".htm" => "text/html", + ".js" => "text/javascript", + ".asc" => "text/plain", + ".c" => "text/plain", + ".cpp" => "text/plain", + ".log" => "text/plain", + ".conf" => "text/plain", + ".text" => "text/plain", + ".txt" => "text/plain", + ".dtd" => "text/xml", + ".xml" => "text/xml", + ".mpeg" => "video/mpeg", + ".mpg" => "video/mpeg", + ".mov" => "video/quicktime", + ".qt" => "video/quicktime", + ".avi" => "video/x-msvideo", + ".asf" => "video/x-ms-asf", + ".asx" => "video/x-ms-asf", + ".wmv" => "video/x-ms-wmv", + ".bz2" => "application/x-bzip", + ".tbz" => "application/x-bzip-compressed-tar", + ".tar.bz2" => "application/x-bzip-compressed-tar", + "" => "text/plain" +); + +my \$app = builder { + # to be able to override \$SIG{__WARN__} to log build time warnings + use CGI::Carp; # it sets \$SIG{__WARN__} itself + + my \$logdir = "$fqgitdir/gitweb/$httpd_only"; + open my \$access_log_fh, '>>', "\$logdir/access.log" + or die "Couldn't open access log '\$logdir/access.log': \$!"; + open my \$error_log_fh, '>>', "\$logdir/error.log" + or die "Couldn't open error log '\$logdir/error.log': \$!"; + + \$access_log_fh->autoflush(1); + \$error_log_fh->autoflush(1); + + # redirect build time warnings to error.log + \$SIG{'__WARN__'} = sub { + my \$msg = shift; + # timestamp warning like in CGI::Carp::warn + my \$stamp = CGI::Carp::stamp(); + \$msg =~ s/^/\$stamp/gm; + print \$error_log_fh \$msg; + }; + + # write errors to error.log, access to access.log + enable 'AccessLog', + format => "combined", + logger => sub { print \$access_log_fh @_; }; + enable sub { + my \$app = shift; + sub { + my \$env = shift; + \$env->{'psgi.errors'} = \$error_log_fh; + \$app->(\$env); + } + }; + # gitweb currently doesn't work with $SIG{CHLD} set to 'IGNORE', + # because it uses 'close $fd or die...' on piped filehandle $fh + # (which causes the parent process to wait for child to finish). + enable_if { \$SIG{'CHLD'} eq 'IGNORE' } sub { + my \$app = shift; + sub { + my \$env = shift; + local \$SIG{'CHLD'} = 'DEFAULT'; + local \$SIG{'CLD'} = 'DEFAULT'; + \$app->(\$env); + } + }; + # serve static files, i.e. stylesheet, images, script + enable 'Static', + path => sub { m!\.(js|css|png)\$! && s!^/gitweb/!! }, + root => "$root/", + encoding => 'utf-8'; # encoding for 'text/plain' files + # convert CGI application to PSGI app + Plack::App::WrapCGI->new(script => "$root/gitweb.cgi")->to_app; +}; + +# make it runnable as standalone app, +# like it would be run via 'plackup' utility +if (__FILE__ eq \$0) { + require Plack::Runner; + + my \$runner = Plack::Runner->new(); + \$runner->parse_options(qw(--env deployment --port $port), + "$local" ? qw(--host 127.0.0.1) : ()); + \$runner->run(\$app); } +__END__ +EOF -gitweb_css () { - cat > "$1" <<\EOFGITWEB -@@GITWEB_CSS@@ - -EOFGITWEB + chmod a+x "$fqgitdir/gitweb/gitweb.psgi" + # configuration is embedded in server script file, gitweb.psgi + rm -f "$conf" } -gitweb_js () { - cat > "$1" <<\EOFGITWEB -@@GITWEB_JS@@ - -EOFGITWEB +gitweb_conf() { + cat > "$fqgitdir/gitweb/gitweb_config.perl" <<EOF +#!/usr/bin/perl +our \$projectroot = "$(dirname "$fqgitdir")"; +our \$git_temp = "$fqgitdir/gitweb/tmp"; +our \$projects_list = \$projectroot; +EOF } -gitweb_cgi "$GIT_DIR/gitweb/gitweb.cgi" -gitweb_css "$GIT_DIR/@@GITWEB_CSS_NAME@@" -gitweb_js "$GIT_DIR/@@GITWEB_JS_NAME@@" +gitweb_conf + +resolve_full_httpd +mkdir -p "$fqgitdir/gitweb/$httpd_only" case "$httpd" in *lighttpd*) @@ -419,6 +569,9 @@ webrick) *mongoose*) mongoose_conf ;; +*plackup*) + plackup_conf + ;; *) echo "Unknown httpd specified: $httpd" exit 1 @@ -429,7 +582,7 @@ start_httpd url=http://127.0.0.1:$port if test -n "$browser"; then - git web--browse -b "$browser" $url || echo $url + httpd_is_ready && git web--browse -b "$browser" $url || echo $url else - git web--browse -c "instaweb.browser" $url || echo $url + httpd_is_ready && git web--browse -c "instaweb.browser" $url || echo $url fi diff --git a/git-pull.sh b/git-pull.sh index 1a4729f7bb..a09a44ec4c 100755 --- a/git-pull.sh +++ b/git-pull.sh @@ -43,6 +43,7 @@ merge_args= curr_branch=$(git symbolic-ref -q HEAD) curr_branch_short="${curr_branch#refs/heads/}" rebase=$(git config --bool branch.$curr_branch_short.rebase) +dry_run= while : do case "$1" in @@ -104,6 +105,9 @@ do --no-r|--no-re|--no-reb|--no-reba|--no-rebas|--no-rebase) rebase=false ;; + --d|--dr|--dry|--dry-|--dry-r|--dry-ru|--dry-run) + dry_run=--dry-run + ;; -h|--h|--he|--hel|--help) usage ;; @@ -216,7 +220,8 @@ test true = "$rebase" && { done } orig_head=$(git rev-parse -q --verify HEAD) -git fetch $verbosity $progress --update-head-ok "$@" || exit 1 +git fetch $verbosity $progress $dry_run --update-head-ok "$@" || exit 1 +test -z "$dry_run" || exit 0 curr_head=$(git rev-parse -q --verify HEAD) if test -n "$orig_head" && test "$curr_head" != "$orig_head" diff --git a/git-rebase.sh b/git-rebase.sh index 44f5c65fdb..ab4afa7dee 100755 --- a/git-rebase.sh +++ b/git-rebase.sh @@ -3,7 +3,7 @@ # Copyright (c) 2005 Junio C Hamano. # -USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] [<upstream>|--root] [<branch>] [--quiet | -q]' +USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] (<upstream>|--root) [<branch>] [--quiet | -q]' LONG_USAGE='git-rebase replaces <branch> with a new branch of the same name. When the --onto option is provided the new branch starts out with a HEAD equal to <newbase>, otherwise it is equal to <upstream> @@ -198,14 +198,6 @@ test -f "$GIT_DIR"/rebase-apply/applying && is_interactive "$@" && exec git-rebase--interactive "$@" -if test $# -eq 0 -then - test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage - test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing && - die 'A rebase is in progress, try --continue, --skip or --abort.' - die "No arguments given and $GIT_DIR/rebase-apply already exists." -fi - while test $# != 0 do case "$1" in @@ -370,6 +362,13 @@ do done test $# -gt 2 && usage +if test $# -eq 0 && test -z "$rebase_root" +then + test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage + test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing && + die 'A rebase is in progress, try --continue, --skip or --abort.' +fi + # Make sure we do not have $GIT_DIR/rebase-apply if test -z "$do_merge" then diff --git a/git-submodule.sh b/git-submodule.sh index 8175cb279d..8c562a72e6 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -271,6 +271,8 @@ cmd_foreach() shift done + toplevel=$(pwd) + module_list | while read mode sha1 stage path do diff --git a/git-svn.perl b/git-svn.perl index b3b6964f95..19d6848d0e 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -963,6 +963,7 @@ sub cmd_multi_init { } do_git_init_db(); if (defined $_trunk) { + $_trunk =~ s#^/+##; my $trunk_ref = 'refs/remotes/' . $_prefix . 'trunk'; # try both old-style and new-style lookups: my $gs_trunk = eval { Git::SVN->new($trunk_ref) }; @@ -2054,6 +2055,9 @@ sub new { "\":$ref_id\$\" in config\n"; ($self->{path}, undef) = split(/\s*:\s*/, $fetch); } + $self->{path} =~ s{/+}{/}g; + $self->{path} =~ s{\A/}{}; + $self->{path} =~ s{/\z}{}; $self->{url} = command_oneline('config', '--get', "svn-remote.$repo_id.url") or die "Failed to read \"svn-remote.$repo_id.url\" in config\n"; @@ -2836,8 +2840,9 @@ sub mkemptydirs { foreach my $d (sort keys %empty_dirs) { $d = uri_decode($d); $d =~ s/$strip//; + next unless length($d); next if -d $d; - if (-e _) { + if (-e $d) { warn "$d exists but is not a directory\n"; } else { print "creating empty directory: $d\n"; diff --git a/git-web--browse.sh b/git-web--browse.sh index a578c3a732..dbded76aaf 100755 --- a/git-web--browse.sh +++ b/git-web--browse.sh @@ -31,7 +31,7 @@ valid_custom_tool() valid_tool() { case "$1" in - firefox | iceweasel | konqueror | w3m | links | lynx | dillo | open | start) + firefox | iceweasel | chrome | chromium | konqueror | w3m | links | lynx | dillo | open | start) ;; # happy *) valid_custom_tool "$1" || return 1 @@ -103,7 +103,7 @@ fi if test -z "$browser" ; then if test -n "$DISPLAY"; then - browser_candidates="firefox iceweasel konqueror w3m links lynx dillo" + browser_candidates="firefox iceweasel chrome chromium konqueror w3m links lynx dillo" if test "$KDE_FULL_SESSION" = "true"; then browser_candidates="konqueror $browser_candidates" fi @@ -146,6 +146,11 @@ case "$browser" in test "$vers" -lt 2 && NEWTAB='' "$browser_path" $NEWTAB "$@" & ;; + chrome|chromium) + # Actual command for chromium is chromium-browser. + # No need to specify newTab. It's default in chromium + eval "$browser_path" "$@" & + ;; konqueror) case "$(basename "$browser_path")" in konqueror) diff --git a/gitweb/INSTALL b/gitweb/INSTALL index d484d76b75..823053173c 100644 --- a/gitweb/INSTALL +++ b/gitweb/INSTALL @@ -2,9 +2,10 @@ GIT web Interface (gitweb) Installation ======================================= First you have to generate gitweb.cgi from gitweb.perl using -"make gitweb", then copy appropriate files (gitweb.cgi, gitweb.js, -gitweb.css, git-logo.png and git-favicon.png) to their destination. -For example if git was (or is) installed with /usr prefix, you can do +"make gitweb", then "make install-gitweb" appropriate files +(gitweb.cgi, gitweb.js, gitweb.css, git-logo.png and git-favicon.png) +to their destination. For example if git was (or is) installed with +/usr prefix and gitwebdir is /var/www/cgi-bin, you can do $ make prefix=/usr gitweb ;# as yourself # make gitwebdir=/var/www/cgi-bin install-gitweb ;# as root @@ -81,16 +82,14 @@ Build example minifiers, you can do make GITWEB_PROJECTROOT="/home/local/scm" \ - GITWEB_JS="/gitweb/gitweb.js" \ - GITWEB_CSS="/gitweb/gitweb.css" \ - GITWEB_LOGO="/gitweb/git-logo.png" \ - GITWEB_FAVICON="/gitweb/git-favicon.png" \ + GITWEB_JS="gitweb/static/gitweb.js" \ + GITWEB_CSS="gitweb/static/gitweb.css" \ + GITWEB_LOGO="gitweb/static/git-logo.png" \ + GITWEB_FAVICON="gitweb/static/git-favicon.png" \ bindir=/usr/local/bin \ gitweb - cp -fv gitweb/gitweb.{cgi,js,css} \ - gitweb/git-{favicon,logo}.png \ - /var/www/cgi-bin/gitweb/ + make gitwebdir=/var/www/cgi-bin/gitweb install-gitweb Gitweb config file diff --git a/gitweb/Makefile b/gitweb/Makefile index 935d2d2e07..2fb7c2d77b 100644 --- a/gitweb/Makefile +++ b/gitweb/Makefile @@ -4,10 +4,10 @@ all:: # Define V=1 to have a more verbose compile. # # Define JSMIN to point to JavaScript minifier that functions as -# a filter to have gitweb.js minified. +# a filter to have static/gitweb.js minified. # # Define CSSMIN to point to a CSS minifier in order to generate a minified -# version of gitweb.css +# version of static/gitweb.css # prefix ?= $(HOME) @@ -29,10 +29,10 @@ GITWEB_STRICT_EXPORT = GITWEB_BASE_URL = GITWEB_LIST = GITWEB_HOMETEXT = indextext.html -GITWEB_CSS = gitweb.css -GITWEB_LOGO = git-logo.png -GITWEB_FAVICON = git-favicon.png -GITWEB_JS = gitweb.js +GITWEB_CSS = static/gitweb.css +GITWEB_LOGO = static/git-logo.png +GITWEB_FAVICON = static/git-favicon.png +GITWEB_JS = static/gitweb.js GITWEB_SITE_HEADER = GITWEB_SITE_FOOTER = @@ -54,6 +54,7 @@ PERL_PATH ?= /usr/bin/perl # Shell quote; bindir_SQ = $(subst ','\'',$(bindir))#' gitwebdir_SQ = $(subst ','\'',$(gitwebdir))#' +gitwebstaticdir_SQ = $(subst ','\'',$(gitwebdir)/static)#' SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))#' PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))#' DESTDIR_SQ = $(subst ','\'',$(DESTDIR))#' @@ -88,26 +89,26 @@ all:: gitweb.cgi GITWEB_PROGRAMS = gitweb.cgi ifdef JSMIN -GITWEB_FILES += gitweb.min.js -GITWEB_JS = gitweb.min.js -all:: gitweb.min.js -gitweb.min.js: gitweb.js GITWEB-BUILD-OPTIONS +GITWEB_FILES += static/gitweb.min.js +GITWEB_JS = static/gitweb.min.js +all:: static/gitweb.min.js +static/gitweb.min.js: static/gitweb.js GITWEB-BUILD-OPTIONS $(QUIET_GEN)$(JSMIN) <$< >$@ else -GITWEB_FILES += gitweb.js +GITWEB_FILES += static/gitweb.js endif ifdef CSSMIN -GITWEB_FILES += gitweb.min.css -GITWEB_CSS = gitweb.min.css -all:: gitweb.min.css -gitweb.min.css: gitweb.css GITWEB-BUILD-OPTIONS - $(QUIET_GEN)$(CSSMIN) <$ >$@ +GITWEB_FILES += static/gitweb.min.css +GITWEB_CSS = static/gitweb.min.css +all:: static/gitweb.min.css +static/gitweb.min.css: static/gitweb.css GITWEB-BUILD-OPTIONS + $(QUIET_GEN)$(CSSMIN) <$< >$@ else -GITWEB_FILES += gitweb.css +GITWEB_FILES += static/gitweb.css endif -GITWEB_FILES += git-logo.png git-favicon.png +GITWEB_FILES += static/git-logo.png static/git-favicon.png GITWEB_REPLACE = \ -e 's|++GIT_VERSION++|$(GIT_VERSION)|g' \ @@ -147,12 +148,13 @@ gitweb.cgi: gitweb.perl GITWEB-BUILD-OPTIONS install: all $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitwebdir_SQ)' $(INSTALL) -m 755 $(GITWEB_PROGRAMS) '$(DESTDIR_SQ)$(gitwebdir_SQ)' - $(INSTALL) -m 644 $(GITWEB_FILES) '$(DESTDIR_SQ)$(gitwebdir_SQ)' + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitwebstaticdir_SQ)' + $(INSTALL) -m 644 $(GITWEB_FILES) '$(DESTDIR_SQ)$(gitwebstaticdir_SQ)' ### Cleaning rules clean: - $(RM) gitweb.cgi gitweb.min.js gitweb.min.css GITWEB-BUILD-OPTIONS + $(RM) gitweb.cgi static/gitweb.min.js static/gitweb.min.css GITWEB-BUILD-OPTIONS .PHONY: all clean install .FORCE-GIT-VERSION-FILE FORCE diff --git a/gitweb/README b/gitweb/README index 71742b335d..0e19be8d21 100644 --- a/gitweb/README +++ b/gitweb/README @@ -80,24 +80,26 @@ You can specify the following configuration variables when building GIT: Points to the location where you put gitweb.css on your web server (or to be more generic, the URI of gitweb stylesheet). Relative to the base URI of gitweb. Note that you can setup multiple stylesheets from - the gitweb config file. [Default: gitweb.css (or gitweb.min.css if the - CSSMIN variable is defined / CSS minifier is used)] + the gitweb config file. [Default: static/gitweb.css (or + static/gitweb.min.css if the CSSMIN variable is defined / CSS minifier + is used)] * GITWEB_LOGO Points to the location where you put git-logo.png on your web server (or to be more generic URI of logo, 72x27 size, displayed in top right corner of each gitweb page, and used as logo for Atom feed). Relative - to base URI of gitweb. [Default: git-logo.png] + to base URI of gitweb. [Default: static/git-logo.png] * GITWEB_FAVICON Points to the location where you put git-favicon.png on your web server (or to be more generic URI of favicon, assumed to be image/png type; web browsers that support favicons (website icons) may display them in the browser's URL bar and next to site name in bookmarks). Relative - to base URI of gitweb. [Default: git-favicon.png] + to base URI of gitweb. [Default: static/git-favicon.png] * GITWEB_JS Points to the localtion where you put gitweb.js on your web server (or to be more generic URI of JavaScript code used by gitweb). - Relative to base URI of gitweb. [Default: gitweb.js (or gitweb.min.js - if JSMIN build variable is defined / JavaScript minifier is used)] + Relative to base URI of gitweb. [Default: static/gitweb.js (or + static/gitweb.min.js if JSMIN build variable is defined / JavaScript + minifier is used)] * GITWEB_CONFIG This Perl file will be loaded using 'do' and can be used to override any of the options above as well as some other options -- see the "Runtime diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 934aacb614..2365311d94 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -445,6 +445,19 @@ our %feature = ( 'javascript-actions' => { 'override' => 0, 'default' => [0]}, + + # Syntax highlighting support. This is based on Daniel Svensson's + # and Sham Chukoury's work in gitweb-xmms2.git. + # It requires the 'highlight' program present in $PATH, + # and therefore is disabled by default. + + # To enable system wide have in $GITWEB_CONFIG + # $feature{'highlight'}{'default'} = [1]; + + 'highlight' => { + 'sub' => sub { feature_bool('highlight', @_) }, + 'override' => 0, + 'default' => [0]}, ); sub gitweb_get_feature { @@ -3179,6 +3192,61 @@ sub blob_contenttype { return $type; } +# guess file syntax for syntax highlighting; return undef if no highlighting +# the name of syntax can (in the future) depend on syntax highlighter used +sub guess_file_syntax { + my ($highlight, $mimetype, $file_name) = @_; + return undef unless ($highlight && defined $file_name); + + # configuration for 'highlight' (http://www.andre-simon.de/) + # match by basename + my %highlight_basename = ( + #'Program' => 'py', + #'Library' => 'py', + 'SConstruct' => 'py', # SCons equivalent of Makefile + 'Makefile' => 'make', + ); + # match by extension + my %highlight_ext = ( + # main extensions, defining name of syntax; + # see files in /usr/share/highlight/langDefs/ directory + map { $_ => $_ } + qw(py c cpp rb java css php sh pl js tex bib xml awk bat ini spec tcl), + # alternate extensions, see /etc/highlight/filetypes.conf + 'h' => 'c', + map { $_ => 'cpp' } qw(cxx c++ cc), + map { $_ => 'php' } qw(php3 php4), + map { $_ => 'pl' } qw(perl pm), # perhaps also 'cgi' + 'mak' => 'make', + map { $_ => 'xml' } qw(xhtml html htm), + ); + + my $basename = basename($file_name, '.in'); + return $highlight_basename{$basename} + if exists $highlight_basename{$basename}; + + $basename =~ /\.([^.]*)$/; + my $ext = $1 or return undef; + return $highlight_ext{$ext} + if exists $highlight_ext{$ext}; + + return undef; +} + +# run highlighter and return FD of its output, +# or return original FD if no highlighting +sub run_highlighter { + my ($fd, $highlight, $syntax) = @_; + return $fd unless ($highlight && defined $syntax); + + close $fd + or die_error(404, "Reading blob failed"); + open $fd, quote_command(git_cmd(), "cat-file", "blob", $hash)." | ". + "highlight --xhtml --fragment --syntax $syntax |" + or die_error(500, "Couldn't open file or run syntax highlighter"); + return $fd; +} + ## ====================================================================== ## functions printing HTML: header, footer, error page @@ -3220,7 +3288,7 @@ sub git_header_html { } print $cgi->header(-type=>$content_type, -charset => 'utf-8', -status=> $status, -expires => $expires) - unless ($opts{'-no_http_headers'}); + unless ($opts{'-no_http_header'}); my $mod_perl_version = $ENV{'MOD_PERL'} ? " $ENV{'MOD_PERL'}" : ''; print <<EOF; <?xml version="1.0" encoding="utf-8"?> @@ -5380,6 +5448,7 @@ sub git_blob { open my $fd, "-|", git_cmd(), "cat-file", "blob", $hash or die_error(500, "Couldn't cat $file_name, $hash"); my $mimetype = blob_mimetype($fd, $file_name); + # use 'blob_plain' (aka 'raw') view for files that cannot be displayed if ($mimetype !~ m!^(?:text/|image/(?:gif|png|jpeg)$)! && -B $fd) { close $fd; return git_blob_plain($mimetype); @@ -5387,6 +5456,11 @@ sub git_blob { # we can have blame only for text/* mimetype $have_blame &&= ($mimetype =~ m!^text/!); + my $highlight = gitweb_check_feature('highlight'); + my $syntax = guess_file_syntax($highlight, $mimetype, $file_name); + $fd = run_highlighter($fd, $highlight, $syntax) + if $syntax; + git_header_html(undef, $expires); my $formats_nav = ''; if (defined $hash_base && (my %co = parse_commit($hash_base))) { @@ -5436,9 +5510,8 @@ sub git_blob { chomp $line; $nr++; $line = untabify($line); - printf "<div class=\"pre\"><a id=\"l%i\" href=\"" . href(-replay => 1) - . "#l%i\" class=\"linenr\">%4i</a> %s</div>\n", - $nr, $nr, $nr, esc_html($line, -nbsp=>1); + printf qq!<div class="pre"><a id="l%i" href="%s#l%i" class="linenr">%4i</a> %s</div>\n!, + $nr, href(-replay => 1), $nr, $nr, $syntax ? $line : esc_html($line, -nbsp=>1); } } close $fd diff --git a/gitweb/git-favicon.png b/gitweb/static/git-favicon.png Binary files differindex aae35a70e7..aae35a70e7 100644 --- a/gitweb/git-favicon.png +++ b/gitweb/static/git-favicon.png diff --git a/gitweb/git-logo.png b/gitweb/static/git-logo.png Binary files differindex f4ede2e944..f4ede2e944 100644 --- a/gitweb/git-logo.png +++ b/gitweb/static/git-logo.png diff --git a/gitweb/gitweb.css b/gitweb/static/gitweb.css index 50067f2e0d..4132aabcdb 100644 --- a/gitweb/gitweb.css +++ b/gitweb/static/gitweb.css @@ -572,3 +572,21 @@ span.match { div.binary { font-style: italic; } + +/* Style definition generated by highlight 2.4.5, http://www.andre-simon.de/ */ + +/* Highlighting theme definition: */ + +.num { color:#2928ff; } +.esc { color:#ff00ff; } +.str { color:#ff0000; } +.dstr { color:#818100; } +.slc { color:#838183; font-style:italic; } +.com { color:#838183; font-style:italic; } +.dir { color:#008200; } +.sym { color:#000000; } +.line { color:#555555; } +.kwa { color:#000000; font-weight:bold; } +.kwb { color:#830000; } +.kwc { color:#000000; font-weight:bold; } +.kwd { color:#010181; } diff --git a/gitweb/gitweb.js b/gitweb/static/gitweb.js index 9c66928c4a..9c66928c4a 100644 --- a/gitweb/gitweb.js +++ b/gitweb/static/gitweb.js @@ -211,6 +211,18 @@ struct git_graph { unsigned short default_column_color; }; +static struct strbuf *diff_output_prefix_callback(struct diff_options *opt, void *data) +{ + struct git_graph *graph = data; + static struct strbuf msgbuf = STRBUF_INIT; + + assert(graph); + + strbuf_reset(&msgbuf); + graph_padding_line(graph, &msgbuf); + return &msgbuf; +} + struct git_graph *graph_init(struct rev_info *opt) { struct git_graph *graph = xmalloc(sizeof(struct git_graph)); @@ -244,6 +256,13 @@ struct git_graph *graph_init(struct rev_info *opt) graph->mapping = xmalloc(sizeof(int) * 2 * graph->column_capacity); graph->new_mapping = xmalloc(sizeof(int) * 2 * graph->column_capacity); + /* + * The diff output prefix callback, with this we can make + * all the diff output to align with the graph lines. + */ + opt->diffopt.output_prefix = diff_output_prefix_callback; + opt->diffopt.output_prefix_data = graph; + return graph; } @@ -7,6 +7,7 @@ void append_header_grep_pattern(struct grep_opt *opt, enum grep_header_field fie { struct grep_pat *p = xcalloc(1, sizeof(*p)); p->pattern = pat; + p->patternlen = strlen(pat); p->origin = "header"; p->no = 0; p->token = GREP_PATTERN_HEAD; @@ -19,8 +20,15 @@ void append_header_grep_pattern(struct grep_opt *opt, enum grep_header_field fie void append_grep_pattern(struct grep_opt *opt, const char *pat, const char *origin, int no, enum grep_pat_token t) { + append_grep_pat(opt, pat, strlen(pat), origin, no, t); +} + +void append_grep_pat(struct grep_opt *opt, const char *pat, size_t patlen, + const char *origin, int no, enum grep_pat_token t) +{ struct grep_pat *p = xcalloc(1, sizeof(*p)); p->pattern = pat; + p->patternlen = patlen; p->origin = origin; p->no = no; p->token = t; @@ -44,8 +52,8 @@ struct grep_opt *grep_opt_dup(const struct grep_opt *opt) append_header_grep_pattern(ret, pat->field, pat->pattern); else - append_grep_pattern(ret, pat->pattern, pat->origin, - pat->no, pat->token); + append_grep_pat(ret, pat->pattern, pat->patternlen, + pat->origin, pat->no, pat->token); } return ret; @@ -329,14 +337,21 @@ static void show_name(struct grep_opt *opt, const char *name) opt->output(opt, opt->null_following_name ? "\0" : "\n", 1); } - -static int fixmatch(const char *pattern, char *line, int ignore_case, regmatch_t *match) +static int fixmatch(struct grep_pat *p, char *line, char *eol, + regmatch_t *match) { char *hit; - if (ignore_case) - hit = strcasestr(line, pattern); - else - hit = strstr(line, pattern); + + if (p->ignore_case) { + char *s = line; + do { + hit = strcasestr(s, p->pattern); + if (hit) + break; + s += strlen(s) + 1; + } while (s < eol); + } else + hit = memmem(line, eol - line, p->pattern, p->patternlen); if (!hit) { match->rm_so = match->rm_eo = -1; @@ -344,11 +359,22 @@ static int fixmatch(const char *pattern, char *line, int ignore_case, regmatch_t } else { match->rm_so = hit - line; - match->rm_eo = match->rm_so + strlen(pattern); + match->rm_eo = match->rm_so + p->patternlen; return 0; } } +static int regmatch(const regex_t *preg, char *line, char *eol, + regmatch_t *match, int eflags) +{ +#ifdef REG_STARTEND + match->rm_so = 0; + match->rm_eo = eol - line; + eflags |= REG_STARTEND; +#endif + return regexec(preg, line, 1, match, eflags); +} + static int strip_timestamp(char *bol, char **eol_p) { char *eol = *eol_p; @@ -399,9 +425,9 @@ static int match_one_pattern(struct grep_pat *p, char *bol, char *eol, again: if (p->fixed) - hit = !fixmatch(p->pattern, bol, p->ignore_case, pmatch); + hit = !fixmatch(p, bol, eol, pmatch); else - hit = !regexec(&p->regexp, bol, 1, pmatch, eflags); + hit = !regmatch(&p->regexp, bol, eol, pmatch, eflags); if (hit && p->word_regexp) { if ((pmatch[0].rm_so < 0) || @@ -726,16 +752,9 @@ static int look_ahead(struct grep_opt *opt, regmatch_t m; if (p->fixed) - hit = !fixmatch(p->pattern, bol, p->ignore_case, &m); - else { -#ifdef REG_STARTEND - m.rm_so = 0; - m.rm_eo = *left_p; - hit = !regexec(&p->regexp, bol, 1, &m, REG_STARTEND); -#else - hit = !regexec(&p->regexp, bol, 1, &m, 0); -#endif - } + hit = !fixmatch(p, bol, bol + *left_p, &m); + else + hit = !regmatch(&p->regexp, bol, bol + *left_p, &m, 0); if (!hit || m.rm_so < 0 || m.rm_eo < 0) continue; if (earliest < 0 || m.rm_so < earliest) @@ -800,17 +819,19 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name, opt->show_hunk_mark = 1; opt->last_shown = 0; - if (buffer_is_binary(buf, size)) { - switch (opt->binary) { - case GREP_BINARY_DEFAULT: + switch (opt->binary) { + case GREP_BINARY_DEFAULT: + if (buffer_is_binary(buf, size)) binary_match_only = 1; - break; - case GREP_BINARY_NOMATCH: + break; + case GREP_BINARY_NOMATCH: + if (buffer_is_binary(buf, size)) return 0; /* Assume unmatch */ - break; - default: - break; - } + break; + case GREP_BINARY_TEXT: + break; + default: + die("bug: unknown binary handling mode"); } memset(&xecfg, 0, sizeof(xecfg)); @@ -871,6 +892,12 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name, count++; if (opt->status_only) return 1; + if (opt->name_only) { + show_name(opt, name); + return 1; + } + if (opt->count) + goto next_line; if (binary_match_only) { opt->output(opt, "Binary file ", 12); output_color(opt, name, strlen(name), @@ -878,22 +905,14 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name, opt->output(opt, " matches\n", 9); return 1; } - if (opt->name_only) { - show_name(opt, name); - return 1; - } /* Hit at this line. If we haven't shown the * pre-context lines, we would need to show them. - * When asked to do "count", this still show - * the context which is nonsense, but the user - * deserves to get that ;-). */ if (opt->pre_context) show_pre_context(opt, name, buf, bol, lno); else if (opt->funcname) show_funcname_line(opt, name, buf, bol, lno); - if (!opt->count) - show_line(opt, bol, eol, name, lno, ':'); + show_line(opt, bol, eol, name, lno, ':'); last_hit = lno; } else if (last_hit && @@ -937,6 +956,7 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name, output_sep(opt, ':'); snprintf(buf, sizeof(buf), "%u\n", count); opt->output(opt, buf, strlen(buf)); + return 1; } return !!last_hit; } @@ -29,6 +29,7 @@ struct grep_pat { int no; enum grep_pat_token token; const char *pattern; + size_t patternlen; enum grep_header_field field; regex_t regexp; unsigned fixed:1; @@ -104,6 +105,7 @@ struct grep_opt { void *output_priv; }; +extern void append_grep_pat(struct grep_opt *opt, const char *pat, size_t patlen, const char *origin, int no, enum grep_pat_token t); extern void append_grep_pattern(struct grep_opt *opt, const char *pat, const char *origin, int no, enum grep_pat_token t); extern void append_header_grep_pattern(struct grep_opt *, enum grep_header_field, const char *); extern void compile_grep_patterns(struct grep_opt *opt); diff --git a/http-backend.c b/http-backend.c index d1e83d0906..f0e787e37d 100644 --- a/http-backend.c +++ b/http-backend.c @@ -6,6 +6,7 @@ #include "exec_cmd.h" #include "run-command.h" #include "string-list.h" +#include "url.h" static const char content_type[] = "Content-Type"; static const char content_length[] = "Content-Length"; @@ -25,60 +26,6 @@ static struct rpc_service rpc_service[] = { { "receive-pack", "receivepack", -1 }, }; -static int decode_char(const char *q) -{ - int i; - unsigned char val = 0; - for (i = 0; i < 2; i++) { - unsigned char c = *q++; - val <<= 4; - if (c >= '0' && c <= '9') - val += c - '0'; - else if (c >= 'a' && c <= 'f') - val += c - 'a' + 10; - else if (c >= 'A' && c <= 'F') - val += c - 'A' + 10; - else - return -1; - } - return val; -} - -static char *decode_parameter(const char **query, int is_name) -{ - const char *q = *query; - struct strbuf out; - - strbuf_init(&out, 16); - do { - unsigned char c = *q; - - if (!c) - break; - if (c == '&' || (is_name && c == '=')) { - q++; - break; - } - - if (c == '%') { - int val = decode_char(q + 1); - if (0 <= val) { - strbuf_addch(&out, val); - q += 3; - continue; - } - } - - if (c == '+') - strbuf_addch(&out, ' '); - else - strbuf_addch(&out, c); - q++; - } while (1); - *query = q; - return strbuf_detach(&out, NULL); -} - static struct string_list *get_parameters(void) { if (!query_params) { @@ -86,8 +33,8 @@ static struct string_list *get_parameters(void) query_params = xcalloc(1, sizeof(*query_params)); while (query && *query) { - char *name = decode_parameter(&query, 1); - char *value = decode_parameter(&query, 0); + char *name = url_decode_parameter_name(&query); + char *value = url_decode_parameter_value(&query); struct string_list_item *i; i = string_list_lookup(name, query_params); diff --git a/log-tree.c b/log-tree.c index d3ae969f60..2e2be7c40f 100644 --- a/log-tree.c +++ b/log-tree.c @@ -469,6 +469,12 @@ int log_tree_diff_flush(struct rev_info *opt) int pch = DIFF_FORMAT_DIFFSTAT | DIFF_FORMAT_PATCH; if ((pch & opt->diffopt.output_format) == pch) printf("---"); + if (opt->diffopt.output_prefix) { + struct strbuf *msg = NULL; + msg = opt->diffopt.output_prefix(&opt->diffopt, + opt->diffopt.output_prefix_data); + fwrite(msg->buf, msg->len, 1, stdout); + } putchar('\n'); } } diff --git a/merge-file.c b/merge-file.c index c336c93c01..db4d0d50d3 100644 --- a/merge-file.c +++ b/merge-file.c @@ -66,7 +66,7 @@ static int generate_common_file(mmfile_t *res, mmfile_t *f1, mmfile_t *f2) xdemitcb_t ecb; memset(&xpp, 0, sizeof(xpp)); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 3; xecfg.flags = XDL_EMIT_COMMON; @@ -1083,7 +1083,7 @@ int write_notes_tree(struct notes_tree *t, unsigned char *result) return ret; } -void prune_notes(struct notes_tree *t) +void prune_notes(struct notes_tree *t, int flags) { struct note_delete_list *l = NULL; @@ -1094,7 +1094,10 @@ void prune_notes(struct notes_tree *t) for_each_note(t, 0, prune_notes_helper, &l); while (l) { - remove_note(t, l->sha1); + if (flags & NOTES_PRUNE_VERBOSE) + printf("%s\n", sha1_to_hex(l->sha1)); + if (!(flags & NOTES_PRUNE_DRYRUN)) + remove_note(t, l->sha1); l = l->next; } } @@ -171,6 +171,9 @@ int for_each_note(struct notes_tree *t, int flags, each_note_fn fn, */ int write_notes_tree(struct notes_tree *t, unsigned char *result); +/* Flags controlling the operation of prune */ +#define NOTES_PRUNE_VERBOSE 1 +#define NOTES_PRUNE_DRYRUN 2 /* * Remove all notes annotating non-existing objects from the given notes tree * @@ -181,7 +184,7 @@ int write_notes_tree(struct notes_tree *t, unsigned char *result); * structure are not persistent until a subsequent call to write_notes_tree() * returns zero. */ -void prune_notes(struct notes_tree *t); +void prune_notes(struct notes_tree *t, int flags); /* * Free (and de-initialize) the given notes_tree structure @@ -11,6 +11,17 @@ #include "reflog-walk.h" static char *user_format; +static struct cmt_fmt_map { + const char *name; + enum cmit_fmt format; + int is_tformat; + int is_alias; + const char *user_format; +} *commit_formats; +static size_t builtin_formats_len; +static size_t commit_formats_len; +static size_t commit_formats_alloc; +static struct cmt_fmt_map *find_commit_format(const char *sought); static void save_user_format(struct rev_info *rev, const char *cp, int is_tformat) { @@ -21,22 +32,118 @@ static void save_user_format(struct rev_info *rev, const char *cp, int is_tforma rev->commit_format = CMIT_FMT_USERFORMAT; } -void get_commit_format(const char *arg, struct rev_info *rev) +static int git_pretty_formats_config(const char *var, const char *value, void *cb) { + struct cmt_fmt_map *commit_format = NULL; + const char *name; + const char *fmt; int i; - static struct cmt_fmt_map { - const char *n; - size_t cmp_len; - enum cmit_fmt v; - } cmt_fmts[] = { - { "raw", 1, CMIT_FMT_RAW }, - { "medium", 1, CMIT_FMT_MEDIUM }, - { "short", 1, CMIT_FMT_SHORT }, - { "email", 1, CMIT_FMT_EMAIL }, - { "full", 5, CMIT_FMT_FULL }, - { "fuller", 5, CMIT_FMT_FULLER }, - { "oneline", 1, CMIT_FMT_ONELINE }, + + if (prefixcmp(var, "pretty.")) + return 0; + + name = var + strlen("pretty."); + for (i = 0; i < builtin_formats_len; i++) { + if (!strcmp(commit_formats[i].name, name)) + return 0; + } + + for (i = builtin_formats_len; i < commit_formats_len; i++) { + if (!strcmp(commit_formats[i].name, name)) { + commit_format = &commit_formats[i]; + break; + } + } + + if (!commit_format) { + ALLOC_GROW(commit_formats, commit_formats_len+1, + commit_formats_alloc); + commit_format = &commit_formats[commit_formats_len]; + memset(commit_format, 0, sizeof(*commit_format)); + commit_formats_len++; + } + + commit_format->name = xstrdup(name); + commit_format->format = CMIT_FMT_USERFORMAT; + git_config_string(&fmt, var, value); + if (!prefixcmp(fmt, "format:") || !prefixcmp(fmt, "tformat:")) { + commit_format->is_tformat = fmt[0] == 't'; + fmt = strchr(fmt, ':') + 1; + } else if (strchr(fmt, '%')) + commit_format->is_tformat = 1; + else + commit_format->is_alias = 1; + commit_format->user_format = fmt; + + return 0; +} + +static void setup_commit_formats(void) +{ + struct cmt_fmt_map builtin_formats[] = { + { "raw", CMIT_FMT_RAW, 0 }, + { "medium", CMIT_FMT_MEDIUM, 0 }, + { "short", CMIT_FMT_SHORT, 0 }, + { "email", CMIT_FMT_EMAIL, 0 }, + { "fuller", CMIT_FMT_FULLER, 0 }, + { "full", CMIT_FMT_FULL, 0 }, + { "oneline", CMIT_FMT_ONELINE, 1 } }; + commit_formats_len = ARRAY_SIZE(builtin_formats); + builtin_formats_len = commit_formats_len; + ALLOC_GROW(commit_formats, commit_formats_len, commit_formats_alloc); + memcpy(commit_formats, builtin_formats, + sizeof(*builtin_formats)*ARRAY_SIZE(builtin_formats)); + + git_config(git_pretty_formats_config, NULL); +} + +static struct cmt_fmt_map *find_commit_format_recursive(const char *sought, + const char *original, + int num_redirections) +{ + struct cmt_fmt_map *found = NULL; + size_t found_match_len = 0; + int i; + + if (num_redirections >= commit_formats_len) + die("invalid --pretty format: " + "'%s' references an alias which points to itself", + original); + + for (i = 0; i < commit_formats_len; i++) { + size_t match_len; + + if (prefixcmp(commit_formats[i].name, sought)) + continue; + + match_len = strlen(commit_formats[i].name); + if (found == NULL || found_match_len > match_len) { + found = &commit_formats[i]; + found_match_len = match_len; + } + } + + if (found && found->is_alias) { + found = find_commit_format_recursive(found->user_format, + original, + num_redirections+1); + } + + return found; +} + +static struct cmt_fmt_map *find_commit_format(const char *sought) +{ + if (!commit_formats) + setup_commit_formats(); + + return find_commit_format_recursive(sought, sought, 0); +} + +void get_commit_format(const char *arg, struct rev_info *rev) +{ + struct cmt_fmt_map *commit_format; rev->use_terminator = 0; if (!arg || !*arg) { @@ -47,21 +154,22 @@ void get_commit_format(const char *arg, struct rev_info *rev) save_user_format(rev, strchr(arg, ':') + 1, arg[0] == 't'); return; } - for (i = 0; i < ARRAY_SIZE(cmt_fmts); i++) { - if (!strncmp(arg, cmt_fmts[i].n, cmt_fmts[i].cmp_len) && - !strncmp(arg, cmt_fmts[i].n, strlen(arg))) { - if (cmt_fmts[i].v == CMIT_FMT_ONELINE) - rev->use_terminator = 1; - rev->commit_format = cmt_fmts[i].v; - return; - } - } + if (strchr(arg, '%')) { save_user_format(rev, arg, 1); return; } - die("invalid --pretty format: %s", arg); + commit_format = find_commit_format(arg); + if (!commit_format) + die("invalid --pretty format: %s", arg); + + rev->commit_format = commit_format->format; + rev->use_terminator = commit_format->is_tformat; + if (commit_format->format == CMIT_FMT_USERFORMAT) { + save_user_format(rev, commit_format->user_format, + commit_format->is_tformat); + } } /* @@ -295,42 +295,75 @@ void write_name_quotedpfx(const char *pfx, size_t pfxlen, fputc(terminator, fp); } -/* quote path as relative to the given prefix */ -char *quote_path_relative(const char *in, int len, - struct strbuf *out, const char *prefix) +static const char *path_relative(const char *in, int len, + struct strbuf *sb, const char *prefix, + int prefix_len); + +void write_name_quoted_relative(const char *name, size_t len, + const char *prefix, size_t prefix_len, + FILE *fp, int terminator) { - int needquote; + struct strbuf sb = STRBUF_INIT; + + name = path_relative(name, len, &sb, prefix, prefix_len); + write_name_quoted(name, fp, terminator); + + strbuf_release(&sb); +} + +/* + * Give path as relative to prefix. + * + * The strbuf may or may not be used, so do not assume it contains the + * returned path. + */ +static const char *path_relative(const char *in, int len, + struct strbuf *sb, const char *prefix, + int prefix_len) +{ + int off, i; if (len < 0) len = strlen(in); + if (prefix && prefix_len < 0) + prefix_len = strlen(prefix); + + off = 0; + i = 0; + while (i < prefix_len && i < len && prefix[i] == in[i]) { + if (prefix[i] == '/') + off = i + 1; + i++; + } + in += off; + len -= off; + + if (i >= prefix_len) + return in; - /* "../" prefix itself does not need quoting, but "in" might. */ - needquote = next_quote_pos(in, len) < len; - strbuf_setlen(out, 0); - strbuf_grow(out, len); - - if (needquote) - strbuf_addch(out, '"'); - if (prefix) { - int off = 0; - while (prefix[off] && off < len && prefix[off] == in[off]) - if (prefix[off] == '/') { - prefix += off + 1; - in += off + 1; - len -= off + 1; - off = 0; - } else - off++; - - for (; *prefix; prefix++) - if (*prefix == '/') - strbuf_addstr(out, "../"); + strbuf_reset(sb); + strbuf_grow(sb, len); + + while (i < prefix_len) { + if (prefix[i] == '/') + strbuf_addstr(sb, "../"); + i++; } + strbuf_add(sb, in, len); + + return sb->buf; +} - quote_c_style_counted (in, len, out, NULL, 1); +/* quote path as relative to the given prefix */ +char *quote_path_relative(const char *in, int len, + struct strbuf *out, const char *prefix) +{ + struct strbuf sb = STRBUF_INIT; + const char *rel = path_relative(in, len, &sb, prefix, -1); + strbuf_reset(out); + quote_c_style_counted(rel, strlen(rel), out, NULL, 0); + strbuf_release(&sb); - if (needquote) - strbuf_addch(out, '"'); if (!out->len) strbuf_addstr(out, "./"); @@ -54,9 +54,12 @@ extern void quote_two_c_style(struct strbuf *, const char *, const char *, int); extern void write_name_quoted(const char *name, FILE *, int terminator); extern void write_name_quotedpfx(const char *pfx, size_t pfxlen, const char *name, FILE *, int terminator); +extern void write_name_quoted_relative(const char *name, size_t len, + const char *prefix, size_t prefix_len, + FILE *fp, int terminator); /* quote path as relative to the given prefix */ -char *quote_path_relative(const char *in, int len, +extern char *quote_path_relative(const char *in, int len, struct strbuf *out, const char *prefix); /* quoting as a string literal for other languages */ @@ -478,7 +478,7 @@ static void read_config(void) unsigned char sha1[20]; const char *head_ref; int flag; - if (default_remote_name) // did this already + if (default_remote_name) /* did this already */ return; default_remote_name = xstrdup("origin"); current_branch = NULL; @@ -546,6 +546,12 @@ int check_repository_format(void) return check_repository_format_gently(NULL); } +/* + * Returns the "prefix", a path to the current working directory + * relative to the work tree root, or NULL, if the current working + * directory is not a strict subdirectory of the work tree root. The + * prefix always ends with a '/' character. + */ const char *setup_git_directory(void) { const char *retval = setup_git_directory_gently(NULL); diff --git a/sha1_file.c b/sha1_file.c index d8e61a65d1..e42ef96d45 100644 --- a/sha1_file.c +++ b/sha1_file.c @@ -102,20 +102,22 @@ static void fill_sha1_path(char *pathbuf, const unsigned char *sha1) */ char *sha1_file_name(const unsigned char *sha1) { - static char *name, *base; + static char buf[PATH_MAX]; + const char *objdir; + int len; - if (!base) { - const char *sha1_file_directory = get_object_directory(); - int len = strlen(sha1_file_directory); - base = xmalloc(len + 60); - memcpy(base, sha1_file_directory, len); - memset(base+len, 0, 60); - base[len] = '/'; - base[len+3] = '/'; - name = base + len + 1; - } - fill_sha1_path(name, sha1); - return base; + objdir = get_object_directory(); + len = strlen(objdir); + + /* '/' + sha1(2) + '/' + sha1(38) + '\0' */ + if (len + 43 > PATH_MAX) + die("insanely long object directory %s", objdir); + memcpy(buf, objdir, len); + buf[len] = '/'; + buf[len+3] = '/'; + buf[len+42] = '\0'; + fill_sha1_path(buf + len + 1, sha1); + return buf; } static char *sha1_get_pack_name(const unsigned char *sha1, @@ -84,6 +84,12 @@ appropriately before running "make". implied by other options like --valgrind and GIT_TEST_INSTALLED. +--root=<directory>:: + Create "trash" directories used to store all temporary data during + testing under <directory>, instead of the t/ directory. + Using this option with a RAM-based filesystem (such as tmpfs) + can massively speed up the test suite. + You can also set the GIT_TEST_INSTALLED environment variable to the bindir of an existing git installation to test that installation. You still need to have built this git sandbox, from which various diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh index 5a734b1b7b..b70b891b62 100644 --- a/t/gitweb-lib.sh +++ b/t/gitweb-lib.sh @@ -19,9 +19,9 @@ our \$site_name = '[localhost]'; our \$site_header = ''; our \$site_footer = ''; our \$home_text = 'indextext.html'; -our @stylesheets = ('file:///$TEST_DIRECTORY/../gitweb/gitweb.css'); -our \$logo = 'file:///$TEST_DIRECTORY/../gitweb/git-logo.png'; -our \$favicon = 'file:///$TEST_DIRECTORY/../gitweb/git-favicon.png'; +our @stylesheets = ('file:///$TEST_DIRECTORY/../gitweb/static/gitweb.css'); +our \$logo = 'file:///$TEST_DIRECTORY/../gitweb/static/git-logo.png'; +our \$favicon = 'file:///$TEST_DIRECTORY/../gitweb/static/git-favicon.png'; our \$projects_list = ''; our \$export_ok = ''; our \$strict_export = ''; diff --git a/t/t6000lib.sh b/t/lib-t6000.sh index 985d517a1c..985d517a1c 100644 --- a/t/t6000lib.sh +++ b/t/lib-t6000.sh diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index 6cb8d60ea2..828e35baf7 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -65,17 +65,21 @@ test_expect_success expanded_in_repo ' echo "\$Id:NoSpaceAtFront \$" echo "\$Id:NoSpaceAtEitherEnd\$" echo "\$Id: NoTerminatingSymbol" + echo "\$Id: Foreign Commit With Spaces \$" + echo "\$Id: NoTerminatingSymbolAtEOF" } > expanded-keywords && { echo "File with expanded keywords" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" echo "\$Id: NoTerminatingSymbol" + echo "\$Id: Foreign Commit With Spaces \$" + echo "\$Id: NoTerminatingSymbolAtEOF" } > expected-output && git add expanded-keywords && diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 22a80c8268..759cf12e16 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -5,7 +5,9 @@ test_description='git fsck random collection of tests' . ./test-lib.sh test_expect_success setup ' + git config i18n.commitencoding ISO-8859-1 && test_commit A fileA one && + git config --unset i18n.commitencoding && git checkout HEAD^0 && test_commit B fileB two && git tag -d A B && @@ -28,6 +30,12 @@ test_expect_success 'loose objects borrowed from alternate are not missing' ' ) ' +test_expect_success 'valid objects appear valid' ' + { git fsck 2>out; true; } && + ! grep error out && + ! grep fatal out +' + # Corruption tests follow. Make sure to remove all traces of the # specific corruption you test afterwards, lest a later test trip over # it. diff --git a/t/t1501-worktree.sh b/t/t1501-worktree.sh index 9df301211c..bd8b60732b 100755 --- a/t/t1501-worktree.sh +++ b/t/t1501-worktree.sh @@ -30,6 +30,7 @@ test_rev_parse() { EMPTY_TREE=$(git write-tree) mkdir -p work/sub/dir || exit 1 +mkdir -p work2 || exit 1 mv .git repo.git || exit 1 say "core.worktree = relative path" @@ -54,7 +55,9 @@ GIT_DIR=$(pwd)/repo.git GIT_CONFIG=$GIT_DIR/config git config core.worktree "$(pwd)/work" test_rev_parse 'outside' false false false -cd work || exit 1 +cd work2 +test_rev_parse 'outside2' false false false +cd ../work || exit 1 test_rev_parse 'inside' false false true '' cd sub/dir || exit 1 test_rev_parse 'subdirectory' false false true sub/dir/ @@ -67,7 +70,9 @@ git config core.worktree non-existent GIT_WORK_TREE=work export GIT_WORK_TREE test_rev_parse 'outside' false false false -cd work || exit 1 +cd work2 +test_rev_parse 'outside' false false false +cd ../work || exit 1 GIT_WORK_TREE=. test_rev_parse 'inside' false false true '' cd sub/dir || exit 1 @@ -76,6 +81,7 @@ test_rev_parse 'subdirectory' false false true sub/dir/ cd ../../.. || exit 1 mv work repo.git/work +mv work2 repo.git/work2 say "GIT_WORK_TREE=absolute path, work tree below git dir" GIT_DIR=$(pwd)/repo.git @@ -86,6 +92,8 @@ cd repo.git || exit 1 test_rev_parse 'in repo.git' false true false cd objects || exit 1 test_rev_parse 'in repo.git/objects' false true false +cd ../work2 || exit 1 +test_rev_parse 'in repo.git/work2' false true false cd ../work || exit 1 test_rev_parse 'in repo.git/work' false true true '' cd sub/dir || exit 1 diff --git a/t/t2007-checkout-symlink.sh b/t/t2007-checkout-symlink.sh index 20f33436d0..27e2127afe 100755 --- a/t/t2007-checkout-symlink.sh +++ b/t/t2007-checkout-symlink.sh @@ -44,8 +44,10 @@ test_expect_success 'switch from symlink to dir' ' ' -rm -fr frotz xyzzy nitfol && -git checkout -f master || exit +test_expect_success 'Remove temporary directories & switch to master' ' + rm -fr frotz xyzzy nitfol && + git checkout -f master +' test_expect_success 'switch from dir to symlink' ' diff --git a/t/t2106-update-index-assume-unchanged.sh b/t/t2106-update-index-assume-unchanged.sh new file mode 100755 index 0000000000..99d858c6b7 --- /dev/null +++ b/t/t2106-update-index-assume-unchanged.sh @@ -0,0 +1,24 @@ +#!/bin/sh + +test_description='git update-index --assume-unchanged test. +' + +. ./test-lib.sh + +test_expect_success 'setup' \ + ': >file && + git add file && + git commit -m initial && + git branch other && + echo upstream >file && + git add file && + git commit -m upstream' + +test_expect_success 'do not switch branches with dirty file' \ + 'git reset --hard && + git checkout other && + echo dirt >file && + git update-index --assume-unchanged file && + test_must_fail git checkout master' + +test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index 9929f82021..d541544537 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -22,6 +22,7 @@ test_expect_success 'setup 1' ' git branch df-2 && git branch df-3 && git branch remove && + git branch submod && echo hello >>a && cp a d/e && @@ -236,6 +237,17 @@ test_expect_success 'setup 6' ' test_cmp expected actual ' +test_expect_success 'setup 7' ' + + git checkout submod && + git rm d/e && + test_tick && + git commit -m "remove d/e" && + git update-index --add --cacheinfo 160000 $c1 d && + test_tick && + git commit -m "make d/ a submodule" +' + test_expect_success 'merge-recursive simple' ' rm -fr [abcd] && @@ -551,4 +563,21 @@ test_expect_success 'merge removes empty directories' ' test_must_fail test -d d ' +test_expect_failure 'merge-recursive simple w/submodule' ' + + git checkout submod && + git merge remove +' + +test_expect_failure 'merge-recursive simple w/submodule result' ' + + git ls-files -s >actual && + ( + echo "100644 $o5 0 a" + echo "100644 $o0 0 c" + echo "160000 $c1 0 d" + ) >expected && + test_cmp expected actual +' + test_done diff --git a/t/t3306-notes-prune.sh b/t/t3306-notes-prune.sh index a0ed0353e6..b4554041b4 100755 --- a/t/t3306-notes-prune.sh +++ b/t/t3306-notes-prune.sh @@ -60,7 +60,7 @@ test_expect_success 'verify commits and notes' ' test_expect_success 'remove some commits' ' - git reset --hard HEAD~2 && + git reset --hard HEAD~1 && git reflog expire --expire=now HEAD && git gc --prune=now ' @@ -68,7 +68,7 @@ test_expect_success 'remove some commits' ' test_expect_success 'verify that commits are gone' ' ! git cat-file -p 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - ! git cat-file -p 08341ad9e94faa089d60fd3f523affb25c6da189 && + git cat-file -p 08341ad9e94faa089d60fd3f523affb25c6da189 && git cat-file -p ab5f302035f2e7aaf04265f08b42034c23256e1f ' @@ -79,6 +79,26 @@ test_expect_success 'verify that notes are still present' ' git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f ' +test_expect_success 'prune -n does not remove notes' ' + + git notes list > expect && + git notes prune -n && + git notes list > actual && + test_cmp expect actual +' + +cat > expect <<EOF +5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 +EOF + +test_expect_success 'prune -n lists prunable notes' ' + + + git notes prune -n > actual && + test_cmp expect actual +' + + test_expect_success 'prune notes' ' git notes prune @@ -87,6 +107,30 @@ test_expect_success 'prune notes' ' test_expect_success 'verify that notes are gone' ' ! git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && + git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && + git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f +' + +test_expect_success 'remove some commits' ' + + git reset --hard HEAD~1 && + git reflog expire --expire=now HEAD && + git gc --prune=now +' + +cat > expect <<EOF +08341ad9e94faa089d60fd3f523affb25c6da189 +EOF + +test_expect_success 'prune -v notes' ' + + git notes prune -v > actual && + test_cmp expect actual +' + +test_expect_success 'verify that notes are gone' ' + + ! git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && ! git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f ' diff --git a/t/t3307-notes-man.sh b/t/t3307-notes-man.sh new file mode 100755 index 0000000000..3269f2eebd --- /dev/null +++ b/t/t3307-notes-man.sh @@ -0,0 +1,38 @@ +#!/bin/sh + +test_description='Examples from the git-notes man page + +Make sure the manual is not full of lies.' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit A && + test_commit B && + test_commit C +' + +test_expect_success 'example 1: notes to add an Acked-by line' ' + cat <<-\EOF >expect && + B + + Notes: + Acked-by: A C Ker <acker@example.com> + EOF + git notes add -m "Acked-by: A C Ker <acker@example.com>" B && + git show -s B^{commit} >log && + tail -n 4 log >actual && + test_cmp expect actual +' + +test_expect_success 'example 2: binary notes' ' + cp "$TEST_DIRECTORY"/test4012.png . + git checkout B && + blob=$(git hash-object -w test4012.png) && + git notes --ref=logo add -C "$blob" && + git notes --ref=logo copy B C && + git notes --ref=logo show C >actual && + test_cmp test4012.png actual +' + +test_done diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index dbf7dfba9b..e5691bc5ed 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -126,9 +126,20 @@ test_expect_success 'Show verbose error when HEAD could not be detached' ' test_must_fail git rebase topic 2> output.err > output.out && grep "Untracked working tree file .B. would be overwritten" output.err ' +rm -f B + +test_expect_success 'dump usage when upstream arg is missing' ' + git checkout -b usage topic && + test_must_fail git rebase 2>error1 && + grep "[Uu]sage" error1 && + test_must_fail git rebase --abort 2>error2 && + grep "No rebase in progress" error2 && + test_must_fail git rebase --onto master 2>error3 && + grep "[Uu]sage" error3 && + ! grep "can.t shift" error3 +' test_expect_success 'rebase -q is quiet' ' - rm B && git checkout -b quiet topic && git rebase -q master > output.out 2>&1 && test ! -s output.out diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index e92eab09cb..935d101fe8 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -438,6 +438,43 @@ test_expect_success 'whitespace-only changes not reported' ' test_cmp expect actual ' +cat <<EOF >expect +diff --git a/x b/z +similarity index NUM% +rename from x +rename to z +index 380c32a..a97b785 100644 +EOF +test_expect_success 'whitespace-only changes reported across renames' ' + git reset --hard && + for i in 1 2 3 4 5 6 7 8 9; do echo "$i$i$i$i$i$i"; done >x && + git add x && + git commit -m "base" && + sed -e "5s/^/ /" x >z && + git rm x && + git add z && + git diff -w -M --cached | + sed -e "/^similarity index /s/[0-9][0-9]*/NUM/" >actual && + test_cmp expect actual +' + +cat >expected <<\EOF +diff --git a/empty b/void +similarity index 100% +rename from empty +rename to void +EOF + +test_expect_success 'rename empty' ' + git reset --hard && + >empty && + git add empty && + git commit -m empty && + git mv empty void && + git diff -w --cached -M >current && + test_cmp expected current +' + test_expect_success 'combined diff with autocrlf conversion' ' git reset --hard && diff --git a/t/t4043-diff-rename-binary.sh b/t/t4043-diff-rename-binary.sh new file mode 100755 index 0000000000..06012811a1 --- /dev/null +++ b/t/t4043-diff-rename-binary.sh @@ -0,0 +1,45 @@ +#!/bin/sh +# +# Copyright (c) 2010 Jakub Narebski, Christian Couder +# + +test_description='Move a binary file' + +. ./test-lib.sh + + +test_expect_success 'prepare repository' ' + git init && + echo foo > foo && + echo "barQ" | q_to_nul > bar && + git add . && + git commit -m "Initial commit" +' + +test_expect_success 'move the files into a "sub" directory' ' + mkdir sub && + git mv bar foo sub/ && + git commit -m "Moved to sub/" +' + +cat > expected <<\EOF + bar => sub/bar | Bin 5 -> 5 bytes + foo => sub/foo | 0 + 2 files changed, 0 insertions(+), 0 deletions(-) + +diff --git a/bar b/sub/bar +similarity index 100% +rename from bar +rename to sub/bar +diff --git a/foo b/sub/foo +similarity index 100% +rename from foo +rename to sub/foo +EOF + +test_expect_success 'git show -C -C report renames' ' + git show -C -C --raw --binary --stat | tail -n 12 > current && + test_cmp expected current +' + +test_done diff --git a/t/t4044-diff-index-unique-abbrev.sh b/t/t4044-diff-index-unique-abbrev.sh new file mode 100755 index 0000000000..d5ce72be63 --- /dev/null +++ b/t/t4044-diff-index-unique-abbrev.sh @@ -0,0 +1,35 @@ +#!/bin/sh + +test_description='test unique sha1 abbreviation on "index from..to" line' +. ./test-lib.sh + +cat >expect_initial <<EOF +100644 blob 51d2738463ea4ca66f8691c91e33ce64b7d41bb1 foo +EOF + +cat >expect_update <<EOF +100644 blob 51d2738efb4ad8a1e40bed839ab8e116f0a15e47 foo +EOF + +test_expect_success 'setup' ' + echo 4827 > foo && + git add foo && + git commit -m "initial" && + git cat-file -p HEAD: > actual && + test_cmp expect_initial actual && + echo 11742 > foo && + git commit -a -m "update" && + git cat-file -p HEAD: > actual && + test_cmp expect_update actual +' + +cat >expect <<EOF +index 51d27384..51d2738e 100644 +EOF + +test_expect_success 'diff does not produce ambiguous index line' ' + git diff HEAD^..HEAD | grep index > actual && + test_cmp expect actual +' + +test_done diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh new file mode 100755 index 0000000000..cb9f2bdd29 --- /dev/null +++ b/t/t4205-log-pretty-formats.sh @@ -0,0 +1,74 @@ +#!/bin/sh +# +# Copyright (c) 2010, Will Palmer +# + +test_description='Test pretty formats' +. ./test-lib.sh + +test_expect_success 'set up basic repos' ' + >foo && + >bar && + git add foo && + test_tick && + git commit -m initial && + git add bar && + test_tick && + git commit -m "add bar" +' + +test_expect_success 'alias builtin format' ' + git log --pretty=oneline >expected && + git config pretty.test-alias oneline && + git log --pretty=test-alias >actual && + test_cmp expected actual +' + +test_expect_success 'alias masking builtin format' ' + git log --pretty=oneline >expected && + git config pretty.oneline "%H" && + git log --pretty=oneline >actual && + test_cmp expected actual +' + +test_expect_success 'alias user-defined format' ' + git log --pretty="format:%h" >expected && + git config pretty.test-alias "format:%h" && + git log --pretty=test-alias >actual && + test_cmp expected actual +' + +test_expect_success 'alias user-defined tformat' ' + git log --pretty="tformat:%h" >expected && + git config pretty.test-alias "tformat:%h" && + git log --pretty=test-alias >actual && + test_cmp expected actual +' + +test_expect_success 'alias non-existant format' ' + git config pretty.test-alias format-that-will-never-exist && + test_must_fail git log --pretty=test-alias +' + +test_expect_success 'alias of an alias' ' + git log --pretty="tformat:%h" >expected && + git config pretty.test-foo "tformat:%h" && + git config pretty.test-bar test-foo && + git log --pretty=test-bar >actual && test_cmp expected actual +' + +test_expect_success 'alias masking an alias' ' + git log --pretty=format:"Two %H" >expected && + git config pretty.duplicate "format:One %H" && + git config --add pretty.duplicate "format:Two %H" && + git log --pretty=duplicate >actual && + test_cmp expected actual +' + +test_expect_success 'alias loop' ' + git config pretty.test-foo test-bar && + git config pretty.test-bar test-foo && + test_must_fail git log --pretty=test-foo +' + +test_done diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index 41f17e7693..4c498b1902 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -597,6 +597,94 @@ test_expect_success 'show empty remote' ' ) ' +test_expect_success 'remote set-branches requires a remote' ' + test_must_fail git remote set-branches && + test_must_fail git remote set-branches --add +' + +test_expect_success 'remote set-branches' ' + echo "+refs/heads/*:refs/remotes/scratch/*" >expect.initial && + sort <<-\EOF >expect.add && + +refs/heads/*:refs/remotes/scratch/* + +refs/heads/other:refs/remotes/scratch/other + EOF + sort <<-\EOF >expect.replace && + +refs/heads/maint:refs/remotes/scratch/maint + +refs/heads/master:refs/remotes/scratch/master + +refs/heads/next:refs/remotes/scratch/next + EOF + sort <<-\EOF >expect.add-two && + +refs/heads/maint:refs/remotes/scratch/maint + +refs/heads/master:refs/remotes/scratch/master + +refs/heads/next:refs/remotes/scratch/next + +refs/heads/pu:refs/remotes/scratch/pu + +refs/heads/t/topic:refs/remotes/scratch/t/topic + EOF + sort <<-\EOF >expect.setup-ffonly && + refs/heads/master:refs/remotes/scratch/master + +refs/heads/next:refs/remotes/scratch/next + EOF + sort <<-\EOF >expect.respect-ffonly && + refs/heads/master:refs/remotes/scratch/master + +refs/heads/next:refs/remotes/scratch/next + +refs/heads/pu:refs/remotes/scratch/pu + EOF + + git clone .git/ setbranches && + ( + cd setbranches && + git remote rename origin scratch && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.initial && + + git remote set-branches scratch --add other && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.add && + + git remote set-branches scratch maint master next && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.replace && + + git remote set-branches --add scratch pu t/topic && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.add-two && + + git config --unset-all remote.scratch.fetch && + git config remote.scratch.fetch \ + refs/heads/master:refs/remotes/scratch/master && + git config --add remote.scratch.fetch \ + +refs/heads/next:refs/remotes/scratch/next && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.setup-ffonly && + + git remote set-branches --add scratch pu && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.respect-ffonly + ) && + test_cmp expect.initial actual.initial && + test_cmp expect.add actual.add && + test_cmp expect.replace actual.replace && + test_cmp expect.add-two actual.add-two && + test_cmp expect.setup-ffonly actual.setup-ffonly && + test_cmp expect.respect-ffonly actual.respect-ffonly +' + +test_expect_success 'remote set-branches with --mirror' ' + echo "+refs/*:refs/*" >expect.initial && + echo "+refs/heads/master:refs/heads/master" >expect.replace && + git clone --mirror .git/ setbranches-mirror && + ( + cd setbranches-mirror && + git remote rename origin scratch && + git config --get-all remote.scratch.fetch >../actual.initial && + + git remote set-branches scratch heads/master && + git config --get-all remote.scratch.fetch >../actual.replace + ) && + test_cmp expect.initial actual.initial && + test_cmp expect.replace actual.replace +' + test_expect_success 'new remote' ' git remote add someremote foo && echo foo >expect && diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 3cf1b3da40..d1912351db 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -57,12 +57,24 @@ test_expect_success 'dies when no remote specified and no default remotes found' test_expect_success 'use "origin" when no remote specified' ' - git remote add origin "$(pwd)/.git" && - git ls-remote >actual && + URL="$(pwd)/.git" && + echo "From $URL" >exp_err && + + git remote add origin "$URL" && + git ls-remote 2>actual_err >actual && + + test_cmp exp_err actual_err && test_cmp expected.all actual ' +test_expect_success 'suppress "From <url>" with -q' ' + + git ls-remote -q 2>actual_err && + test_must_fail test_cmp exp_err actual_err + +' + test_expect_success 'use branch.<name>.remote if possible' ' # @@ -78,10 +90,14 @@ test_expect_success 'use branch.<name>.remote if possible' ' git show-ref | sed -e "s/ / /" ) >exp && - git remote add other other.git && + URL="other.git" && + echo "From $URL" >exp_err && + + git remote add other $URL && git config branch.master.remote other && - git ls-remote >actual && + git ls-remote 2>actual_err >actual && + test_cmp exp_err actual_err && test_cmp exp actual ' diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 678cee502d..8abb71afcd 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -176,4 +176,16 @@ test_expect_success 'clone respects global branch.autosetuprebase' ' ) ' +test_expect_success 'respect url-encoding of file://' ' + git init x+y && + test_must_fail git clone "file://$PWD/x+y" xy-url && + git clone "file://$PWD/x%2By" xy-url +' + +test_expect_success 'do not respect url-encoding of non-url path' ' + git init x+y && + test_must_fail git clone x%2By xy-regular && + git clone x+y xy-regular +' + test_done diff --git a/t/t6002-rev-list-bisect.sh b/t/t6002-rev-list-bisect.sh index b4e8fbaa5e..fb07536a0f 100755 --- a/t/t6002-rev-list-bisect.sh +++ b/t/t6002-rev-list-bisect.sh @@ -5,7 +5,7 @@ test_description='Tests git rev-list --bisect functionality' . ./test-lib.sh -. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions +. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions # usage: test_bisection max-diff bisect-option head ^prune... # diff --git a/t/t6003-rev-list-topo-order.sh b/t/t6003-rev-list-topo-order.sh index 2c73f2da7b..e4c52b0214 100755 --- a/t/t6003-rev-list-topo-order.sh +++ b/t/t6003-rev-list-topo-order.sh @@ -6,7 +6,7 @@ test_description='Tests git rev-list --topo-order functionality' . ./test-lib.sh -. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions +. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions list_duplicates() { diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh index f105fab98e..e673c25e94 100755 --- a/t/t6101-rev-parse-parents.sh +++ b/t/t6101-rev-parse-parents.sh @@ -6,7 +6,7 @@ test_description='Test git rev-parse with different parent options' . ./test-lib.sh -. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions +. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions date >path0 git update-index --add path0 diff --git a/t/t7008-grep-binary.sh b/t/t7008-grep-binary.sh new file mode 100755 index 0000000000..eb8ca88cce --- /dev/null +++ b/t/t7008-grep-binary.sh @@ -0,0 +1,102 @@ +#!/bin/sh + +test_description='git grep in binary files' + +. ./test-lib.sh + +test_expect_success 'setup' " + printf 'binary\000file\n' >a && + git add a && + git commit -m. +" + +test_expect_success 'git grep ina a' ' + echo Binary file a matches >expect && + git grep ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -ah ina a' ' + git grep -ah ina a >actual && + test_cmp a actual +' + +test_expect_success 'git grep -I ina a' ' + : >expect && + test_must_fail git grep -I ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -c ina a' ' + echo a:1 >expect && + git grep -c ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -l ina a' ' + echo a >expect && + git grep -l ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -L bar a' ' + echo a >expect && + git grep -L bar a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -q ina a' ' + : >expect && + git grep -q ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -F ile a' ' + git grep -F ile a +' + +test_expect_success 'git grep -Fi iLE a' ' + git grep -Fi iLE a +' + +# This test actually passes on platforms where regexec() supports the +# flag REG_STARTEND. +test_expect_failure 'git grep ile a' ' + git grep ile a +' + +test_expect_failure 'git grep .fi a' ' + git grep .fi a +' + +test_expect_success 'git grep -F y<NUL>f a' " + printf 'y\000f' >f && + git grep -f f -F a +" + +test_expect_success 'git grep -F y<NUL>x a' " + printf 'y\000x' >f && + test_must_fail git grep -f f -F a +" + +test_expect_success 'git grep -Fi Y<NUL>f a' " + printf 'Y\000f' >f && + git grep -f f -Fi a +" + +test_expect_failure 'git grep -Fi Y<NUL>x a' " + printf 'Y\000x' >f && + test_must_fail git grep -f f -Fi a +" + +test_expect_success 'git grep y<NUL>f a' " + printf 'y\000f' >f && + git grep -f f a +" + +test_expect_failure 'git grep y<NUL>x a' " + printf 'y\000x' >f && + test_must_fail git grep -f f a +" + +test_done diff --git a/t/t7010-setup.sh b/t/t7010-setup.sh index d8a7c79852..0335a9a158 100755 --- a/t/t7010-setup.sh +++ b/t/t7010-setup.sh @@ -103,14 +103,10 @@ test_expect_success 'git ls-files (relative #3)' ' git add a && ( cd a/b && - if git ls-files "../e/f" - then - echo Gaah, should have failed - exit 1 - else - : happy - fi - ) + git ls-files "../e/f" + ) >current && + echo ../e/f >expect && + test_cmp expect current ' diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 2a527750ce..db9365b645 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -59,11 +59,13 @@ test_expect_success 'setup a submodule tree' ' sub1sha1=$(cd super/sub1 && git rev-parse HEAD) sub3sha1=$(cd super/sub3 && git rev-parse HEAD) +pwd=$(pwd) + cat > expect <<EOF Entering 'sub1' -foo1-sub1-$sub1sha1 +$pwd/clone-foo1-sub1-$sub1sha1 Entering 'sub3' -foo3-sub3-$sub3sha1 +$pwd/clone-foo3-sub3-$sub3sha1 EOF test_expect_success 'test basic "submodule foreach" usage' ' @@ -71,7 +73,9 @@ test_expect_success 'test basic "submodule foreach" usage' ' ( cd clone && git submodule update --init -- sub1 sub3 && - git submodule foreach "echo \$name-\$path-\$sha1" > ../actual + git submodule foreach "echo \$toplevel-\$name-\$path-\$sha1" > ../actual && + git config foo.bar zar && + git submodule foreach "git config --file \"\$toplevel/.git/config\" foo.bar" ) && test_cmp expect actual ' diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 844fb43c6d..95044668ee 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -35,7 +35,7 @@ test_expect_success 'partial' ' ' -test_expect_success 'partial modification in a subdirecotry' ' +test_expect_success 'partial modification in a subdirectory' ' test_tick && git commit -m "partial commit to subdirectory" not && diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 008d5711b8..9e081073fb 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -107,13 +107,32 @@ A dir2/added ?? untracked EOF -test_expect_success 'status -s (2)' ' +test_expect_success 'status -s' ' git status -s >output && test_cmp expect output ' +cat >expect <<\EOF +## master + M dir1/modified +A dir2/added +?? dir1/untracked +?? dir2/modified +?? dir2/untracked +?? expect +?? output +?? untracked +EOF + +test_expect_success 'status -s -b' ' + + git status -s -b >output && + test_cmp expect output + +' + cat >expect <<EOF # On branch master # Changes to be committed: @@ -437,6 +456,25 @@ test_expect_success 'status -s with color.status' ' ' cat >expect <<\EOF +## <GREEN>master<RESET> + <RED>M<RESET> dir1/modified +<GREEN>A<RESET> dir2/added +<BLUE>??<RESET> dir1/untracked +<BLUE>??<RESET> dir2/modified +<BLUE>??<RESET> dir2/untracked +<BLUE>??<RESET> expect +<BLUE>??<RESET> output +<BLUE>??<RESET> untracked +EOF + +test_expect_success 'status -s -b with color.status' ' + + git status -s -b | test_decode_color >output && + test_cmp expect output + +' + +cat >expect <<\EOF M dir1/modified A dir2/added ?? dir1/untracked @@ -469,6 +507,13 @@ test_expect_success 'status --porcelain ignores color.status' ' git config --unset color.status git config --unset color.ui +test_expect_success 'status --porcelain ignores -b' ' + + git status --porcelain -b >output && + test_cmp expect output + +' + cat >expect <<\EOF # On branch master # Changes to be committed: diff --git a/t/t7509-commit.sh b/t/t7509-commit.sh index d52c060b06..3ea33db6c7 100755 --- a/t/t7509-commit.sh +++ b/t/t7509-commit.sh @@ -83,6 +83,52 @@ test_expect_success '--amend option copies authorship' ' test_cmp expect actual ' +sha1_file() { + echo "$*" | sed "s#..#.git/objects/&/#" +} +remove_object() { + rm -f $(sha1_file "$*") +} +no_reflog() { + cp .git/config .git/config.saved && + echo "[core] logallrefupdates = false" >>.git/config && + test_when_finished "mv -f .git/config.saved .git/config" && + + if test -e .git/logs + then + mv .git/logs . && + test_when_finished "mv logs .git/" + fi +} + +test_expect_success '--amend option with empty author' ' + git cat-file commit Initial >tmp && + sed "s/author [^<]* </author </" tmp >empty-author && + no_reflog && + sha=$(git hash-object -t commit -w empty-author) && + test_when_finished "remove_object $sha" && + git checkout $sha && + test_when_finished "git checkout Initial" && + echo "Empty author test" >>foo && + test_tick && + ! git commit -a -m "empty author" --amend 2>err && + grep "empty ident" err +' + +test_expect_success '--amend option with missing author' ' + git cat-file commit Initial >tmp && + sed "s/author [^<]* </author </" tmp >malformed && + no_reflog && + sha=$(git hash-object -t commit -w malformed) && + test_when_finished "remove_object $sha" && + git checkout $sha && + test_when_finished "git checkout Initial" && + echo "Missing author test" >>foo && + test_tick && + ! git commit -a -m "malformed author" --amend 2>err && + grep "empty ident" err +' + test_expect_success '--reset-author makes the commit ours even with --amend option' ' git checkout Initial && echo "Test 6" >>foo && diff --git a/t/t7604-merge-custom-message.sh b/t/t7604-merge-custom-message.sh index 269cfdf267..9114785ef7 100755 --- a/t/t7604-merge-custom-message.sh +++ b/t/t7604-merge-custom-message.sh @@ -6,6 +6,15 @@ Testing merge when using a custom message for the merge commit.' . ./test-lib.sh +create_merge_msgs() { + echo >exp.subject "custom message" + + cp exp.subject exp.log && + echo >>exp.log "" && + echo >>exp.log "* commit 'c2':" && + echo >>exp.log " c2" +} + test_expect_success 'setup' ' echo c0 > c0.c && git add c0.c && @@ -19,16 +28,23 @@ test_expect_success 'setup' ' echo c2 > c2.c && git add c2.c && git commit -m c2 && - git tag c2 + git tag c2 && + create_merge_msgs ' test_expect_success 'merge c2 with a custom message' ' git reset --hard c1 && - echo >expected "custom message" && - git merge -m "custom message" c2 && + git merge -m "$(cat exp.subject)" c2 && + git cat-file commit HEAD | sed -e "1,/^$/d" >actual && + test_cmp exp.subject actual +' + +test_expect_success 'merge --log appends to custom message' ' + git reset --hard c1 && + git merge --log -m "$(cat exp.subject)" c2 && git cat-file commit HEAD | sed -e "1,/^$/d" >actual && - test_cmp expected actual + test_cmp exp.log actual ' test_done diff --git a/t/t9129-git-svn-i18n-commitencoding.sh b/t/t9129-git-svn-i18n-commitencoding.sh index b9224bdb20..1e9a2eb12b 100755 --- a/t/t9129-git-svn-i18n-commitencoding.sh +++ b/t/t9129-git-svn-i18n-commitencoding.sh @@ -14,10 +14,22 @@ compare_git_head_with () { test_cmp current "$1" } +a_utf8_locale=$(locale -a | sed -n '/\.[uU][tT][fF]-*8$/{ + p + q +}') + +if test -n "$a_utf8_locale" +then + test_set_prereq UTF8 +else + say "UTF-8 locale not available, some tests are skipped" +fi + compare_svn_head_with () { # extract just the log message and strip out committer info. # don't use --limit here since svn 1.1.x doesn't have it, - LC_ALL=en_US.UTF-8 svn log `git svn info --url` | perl -w -e ' + LC_ALL="$a_utf8_locale" svn log `git svn info --url` | perl -w -e ' use bytes; $/ = ("-"x72) . "\n"; my @x = <STDIN>; @@ -69,12 +81,6 @@ do ' done -if locale -a |grep -q en_US.utf8; then - test_set_prereq UTF8 -else - say "UTF-8 locale not available, test skipped" -fi - test_expect_success UTF8 'ISO-8859-1 should match UTF-8 in svn' ' ( cd ISO8859-1 && diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh index daef2d6c23..437e9b8112 100755 --- a/t/t9400-git-cvsserver-server.sh +++ b/t/t9400-git-cvsserver-server.sh @@ -48,7 +48,9 @@ test_expect_success 'setup' ' git pull secondroot master && git clone -q --bare "$WORKDIR/.git" "$SERVERDIR" >/dev/null 2>&1 && GIT_DIR="$SERVERDIR" git config --bool gitcvs.enabled true && - GIT_DIR="$SERVERDIR" git config gitcvs.logfile "$SERVERDIR/gitcvs.log" + GIT_DIR="$SERVERDIR" git config gitcvs.logfile "$SERVERDIR/gitcvs.log" && + GIT_DIR="$SERVERDIR" git config gitcvs.authdb "$SERVERDIR/auth.db" && + echo cvsuser:cvGVEarMLnhlA > "$SERVERDIR/auth.db" ' # note that cvs doesn't accept absolute pathnames @@ -94,6 +96,14 @@ git END VERIFICATION REQUEST EOF +cat >login-git-ok <<EOF +BEGIN VERIFICATION REQUEST +$SERVERDIR +cvsuser +Ah<Z:yZZ30 e +END VERIFICATION REQUEST +EOF + test_expect_success 'pserver authentication' \ 'cat request-anonymous | git-cvsserver pserver >log 2>&1 && sed -ne \$p log | grep "^I LOVE YOU\$"' @@ -107,6 +117,10 @@ test_expect_success 'pserver authentication failure (non-anonymous user)' \ fi && sed -ne \$p log | grep "^I HATE YOU\$"' +test_expect_success 'pserver authentication success (non-anonymous user with password)' \ + 'cat login-git-ok | git-cvsserver pserver >log 2>&1 && + sed -ne \$p log | grep "^I LOVE YOU\$"' + test_expect_success 'pserver authentication (login)' \ 'cat login-anonymous | git-cvsserver pserver >log 2>&1 && sed -ne \$p log | grep "^I LOVE YOU\$"' diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index 63b6b060e6..4f2b9b062b 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -647,4 +647,33 @@ test_expect_success \ gitweb_run "p=.git;a=summary"' test_debug 'cat gitweb.log' +# ---------------------------------------------------------------------- +# syntax highlighting + +cat >>gitweb_config.perl <<\EOF +$feature{'highlight'}{'override'} = 1; +EOF + +highlight --version >/dev/null 2>&1 +if [ $? -eq 127 ]; then + say "Skipping syntax highlighting test, because 'highlight' was not found" +else + test_set_prereq HIGHLIGHT +fi + +test_expect_success HIGHLIGHT \ + 'syntax highlighting (no highlight)' \ + 'git config gitweb.highlight yes && + gitweb_run "p=.git;a=blob;f=file"' +test_debug 'cat gitweb.log' + +test_expect_success HIGHLIGHT \ + 'syntax highlighting (highlighted)' \ + 'git config gitweb.highlight yes && + echo "#!/usr/bin/sh" > test.sh && + git add test.sh && + git commit -m "Add test.sh" && + gitweb_run "p=.git;a=blob;f=test.sh"' +test_debug 'cat gitweb.log' + test_done @@ -25,6 +25,10 @@ #include "cache.h" #include "quote.h" +void do_nothing(size_t unused) +{ +} + /* Get a trace file descriptor from GIT_TRACE env variable. */ static int get_trace_fd(int *need_close) { @@ -72,6 +76,7 @@ void trace_printf(const char *fmt, ...) if (!fd) return; + set_try_to_free_routine(do_nothing); /* is never reset */ strbuf_init(&buf, 64); va_start(ap, fmt); len = vsnprintf(buf.buf, strbuf_avail(&buf), fmt, ap); @@ -103,6 +108,7 @@ void trace_argv_printf(const char **argv, const char *fmt, ...) if (!fd) return; + set_try_to_free_routine(do_nothing); /* is never reset */ strbuf_init(&buf, 64); va_start(ap, fmt); len = vsnprintf(buf.buf, strbuf_avail(&buf), fmt, ap); diff --git a/transport.c b/transport.c index 8ce39364a1..4dba6f8815 100644 --- a/transport.c +++ b/transport.c @@ -9,6 +9,7 @@ #include "dir.h" #include "refs.h" #include "branch.h" +#include "url.h" /* rsync support */ @@ -871,54 +872,6 @@ static int is_file(const char *url) return S_ISREG(buf.st_mode); } -static int isurlschemechar(int first_flag, int ch) -{ - /* - * The set of valid URL schemes, as per STD66 (RFC3986) is - * '[A-Za-z][A-Za-z0-9+.-]*'. But use sightly looser check - * of '[A-Za-z0-9][A-Za-z0-9+.-]*' because earlier version - * of check used '[A-Za-z0-9]+' so not to break any remote - * helpers. - */ - int alphanumeric, special; - alphanumeric = ch > 0 && isalnum(ch); - special = ch == '+' || ch == '-' || ch == '.'; - return alphanumeric || (!first_flag && special); -} - -static int is_url(const char *url) -{ - const char *url2, *first_slash; - - if (!url) - return 0; - url2 = url; - first_slash = strchr(url, '/'); - - /* Input with no slash at all or slash first can't be URL. */ - if (!first_slash || first_slash == url) - return 0; - /* Character before must be : and next must be /. */ - if (first_slash[-1] != ':' || first_slash[1] != '/') - return 0; - /* There must be something before the :// */ - if (first_slash == url + 1) - return 0; - /* - * Check all characters up to first slash - 1. Only alphanum - * is allowed. - */ - url2 = url; - while (url2 < first_slash - 1) { - if (!isurlschemechar(url2 == url, (unsigned char)*url2)) - return 0; - url2++; - } - - /* Valid enough. */ - return 1; -} - static int external_specification_len(const char *url) { return strchr(url, ':') - url; @@ -946,7 +899,7 @@ struct transport *transport_get(struct remote *remote, const char *url) if (url) { const char *p = url; - while (isurlschemechar(p == url, *p)) + while (is_urlschemechar(p == url, *p)) p++; if (!prefixcmp(p, "::")) helper = xstrndup(url, p - url); diff --git a/unpack-trees.c b/unpack-trees.c index c29a9e067f..490cd5f6f4 100644 --- a/unpack-trees.c +++ b/unpack-trees.c @@ -854,7 +854,7 @@ static int verify_uptodate_1(struct cache_entry *ce, { struct stat st; - if (o->index_only || (!ce_skip_worktree(ce) && (o->reset || ce_uptodate(ce)))) + if (o->index_only || (!((ce->ce_flags & CE_VALID) || ce_skip_worktree(ce)) && (o->reset || ce_uptodate(ce)))) return 0; if (!lstat(ce->name, &st)) { @@ -0,0 +1,118 @@ +#include "cache.h" + +int is_urlschemechar(int first_flag, int ch) +{ + /* + * The set of valid URL schemes, as per STD66 (RFC3986) is + * '[A-Za-z][A-Za-z0-9+.-]*'. But use sightly looser check + * of '[A-Za-z0-9][A-Za-z0-9+.-]*' because earlier version + * of check used '[A-Za-z0-9]+' so not to break any remote + * helpers. + */ + int alphanumeric, special; + alphanumeric = ch > 0 && isalnum(ch); + special = ch == '+' || ch == '-' || ch == '.'; + return alphanumeric || (!first_flag && special); +} + +int is_url(const char *url) +{ + const char *url2, *first_slash; + + if (!url) + return 0; + url2 = url; + first_slash = strchr(url, '/'); + + /* Input with no slash at all or slash first can't be URL. */ + if (!first_slash || first_slash == url) + return 0; + /* Character before must be : and next must be /. */ + if (first_slash[-1] != ':' || first_slash[1] != '/') + return 0; + /* There must be something before the :// */ + if (first_slash == url + 1) + return 0; + /* + * Check all characters up to first slash - 1. Only alphanum + * is allowed. + */ + url2 = url; + while (url2 < first_slash - 1) { + if (!is_urlschemechar(url2 == url, (unsigned char)*url2)) + return 0; + url2++; + } + + /* Valid enough. */ + return 1; +} + +static int url_decode_char(const char *q) +{ + int i; + unsigned char val = 0; + for (i = 0; i < 2; i++) { + unsigned char c = *q++; + val <<= 4; + if (c >= '0' && c <= '9') + val += c - '0'; + else if (c >= 'a' && c <= 'f') + val += c - 'a' + 10; + else if (c >= 'A' && c <= 'F') + val += c - 'A' + 10; + else + return -1; + } + return val; +} + +static char *url_decode_internal(const char **query, const char *stop_at) +{ + const char *q = *query; + struct strbuf out; + + strbuf_init(&out, 16); + do { + unsigned char c = *q; + + if (!c) + break; + if (stop_at && strchr(stop_at, c)) { + q++; + break; + } + + if (c == '%') { + int val = url_decode_char(q + 1); + if (0 <= val) { + strbuf_addch(&out, val); + q += 3; + continue; + } + } + + if (c == '+') + strbuf_addch(&out, ' '); + else + strbuf_addch(&out, c); + q++; + } while (1); + *query = q; + return strbuf_detach(&out, NULL); +} + +char *url_decode(const char *url) +{ + return url_decode_internal(&url, NULL); +} + +char *url_decode_parameter_name(const char **query) +{ + return url_decode_internal(query, "&="); +} + +char *url_decode_parameter_value(const char **query) +{ + return url_decode_internal(query, "&"); +} @@ -0,0 +1,10 @@ +#ifndef URL_H +#define URL_H + +extern int is_url(const char *url); +extern int is_urlschemechar(int first_flag, int ch); +extern char *url_decode(const char *url); +extern char *url_decode_parameter_name(const char **query); +extern char *url_decode_parameter_value(const char **query); + +#endif /* URL_H */ diff --git a/userdiff.c b/userdiff.c index 67003fbb23..c49cc1b67e 100644 --- a/userdiff.c +++ b/userdiff.c @@ -45,7 +45,9 @@ PATTERNS("pascal", "|[-+0-9.e]+|0[xXbB]?[0-9a-fA-F]+" "|<>|<=|>=|:=|\\.\\." "|[^[:space:]]|[\x80-\xff]+"), -PATTERNS("php", "^[\t ]*((function|class).*)", +PATTERNS("php", + "^[\t ]*(((public|protected|private|static)[\t ]+)*function.*)$\n" + "^[\t ]*(class.*)$", /* -- */ "[a-zA-Z_][a-zA-Z0-9_]*" "|[-+0-9.e]+|0[xXbB]?[0-9a-fA-F]+" @@ -10,9 +10,11 @@ static void try_to_free_builtin(size_t size) static void (*try_to_free_routine)(size_t size) = try_to_free_builtin; -void set_try_to_free_routine(void (*routine)(size_t)) +try_to_free_t set_try_to_free_routine(try_to_free_t routine) { - try_to_free_routine = (routine) ? routine : try_to_free_builtin; + try_to_free_t old = try_to_free_routine; + try_to_free_routine = routine; + return old; } char *xstrdup(const char *str) diff --git a/wt-status.c b/wt-status.c index 14e0acce8c..636ecdd896 100644 --- a/wt-status.c +++ b/wt-status.c @@ -9,6 +9,7 @@ #include "quote.h" #include "run-command.h" #include "remote.h" +#include "refs.h" static char default_wt_status_colors[][COLOR_MAXLEN] = { GIT_COLOR_NORMAL, /* WT_STATUS_HEADER */ @@ -17,6 +18,8 @@ static char default_wt_status_colors[][COLOR_MAXLEN] = { GIT_COLOR_RED, /* WT_STATUS_UNTRACKED */ GIT_COLOR_RED, /* WT_STATUS_NOBRANCH */ GIT_COLOR_RED, /* WT_STATUS_UNMERGED */ + GIT_COLOR_GREEN, /* WT_STATUS_LOCAL_BRANCH */ + GIT_COLOR_RED, /* WT_STATUS_REMOTE_BRANCH */ }; static const char *color(int slot, struct wt_status *s) @@ -756,9 +759,69 @@ static void wt_shortstatus_other(int null_termination, struct string_list_item * } } -void wt_shortstatus_print(struct wt_status *s, int null_termination) +static void wt_shortstatus_print_tracking(struct wt_status *s) +{ + struct branch *branch; + const char *header_color = color(WT_STATUS_HEADER, s); + const char *branch_color_local = color(WT_STATUS_LOCAL_BRANCH, s); + const char *branch_color_remote = color(WT_STATUS_REMOTE_BRANCH, s); + + const char *base; + const char *branch_name; + int num_ours, num_theirs; + + color_fprintf(s->fp, color(WT_STATUS_HEADER, s), "## "); + + if (!s->branch) + return; + branch_name = s->branch; + + if (!prefixcmp(branch_name, "refs/heads/")) + branch_name += 11; + else if (!strcmp(branch_name, "HEAD")) { + branch_name = "HEAD (no branch)"; + branch_color_local = color(WT_STATUS_NOBRANCH, s); + } + + branch = branch_get(s->branch + 11); + if (s->is_initial) + color_fprintf(s->fp, header_color, "Initial commit on "); + if (!stat_tracking_info(branch, &num_ours, &num_theirs)) { + color_fprintf_ln(s->fp, branch_color_local, + "%s", branch_name); + return; + } + + base = branch->merge[0]->dst; + base = shorten_unambiguous_ref(base, 0); + color_fprintf(s->fp, branch_color_local, "%s", branch_name); + color_fprintf(s->fp, header_color, "..."); + color_fprintf(s->fp, branch_color_remote, "%s", base); + + color_fprintf(s->fp, header_color, " ["); + if (!num_ours) { + color_fprintf(s->fp, header_color, "behind "); + color_fprintf(s->fp, branch_color_remote, "%d", num_theirs); + } else if (!num_theirs) { + color_fprintf(s->fp, header_color, "ahead "); + color_fprintf(s->fp, branch_color_local, "%d", num_ours); + } else { + color_fprintf(s->fp, header_color, "ahead "); + color_fprintf(s->fp, branch_color_local, "%d", num_ours); + color_fprintf(s->fp, header_color, ", behind "); + color_fprintf(s->fp, branch_color_remote, "%d", num_theirs); + } + + color_fprintf_ln(s->fp, header_color, "]"); +} + +void wt_shortstatus_print(struct wt_status *s, int null_termination, int show_branch) { int i; + + if (show_branch) + wt_shortstatus_print_tracking(s); + for (i = 0; i < s->change.nr; i++) { struct wt_status_change_data *d; struct string_list_item *it; @@ -789,5 +852,5 @@ void wt_porcelain_print(struct wt_status *s, int null_termination) s->use_color = 0; s->relative_paths = 0; s->prefix = NULL; - wt_shortstatus_print(s, null_termination); + wt_shortstatus_print(s, null_termination, 0); } diff --git a/wt-status.h b/wt-status.h index 1093e65ae0..4f190454e5 100644 --- a/wt-status.h +++ b/wt-status.h @@ -12,6 +12,8 @@ enum color_wt_status { WT_STATUS_UNTRACKED, WT_STATUS_NOBRANCH, WT_STATUS_UNMERGED, + WT_STATUS_LOCAL_BRANCH, + WT_STATUS_REMOTE_BRANCH, }; enum untracked_status_type { @@ -43,7 +45,7 @@ struct wt_status { int submodule_summary; int show_ignored_files; enum untracked_status_type show_untracked_files; - char color_palette[WT_STATUS_UNMERGED+1][COLOR_MAXLEN]; + char color_palette[WT_STATUS_REMOTE_BRANCH+1][COLOR_MAXLEN]; /* These are computed during processing of the individual sections */ int commitable; @@ -60,7 +62,7 @@ void wt_status_prepare(struct wt_status *s); void wt_status_print(struct wt_status *s); void wt_status_collect(struct wt_status *s); -void wt_shortstatus_print(struct wt_status *s, int null_termination); +void wt_shortstatus_print(struct wt_status *s, int null_termination, int show_branch); void wt_porcelain_print(struct wt_status *s, int null_termination); #endif /* STATUS_H */ |
