diff options
32 files changed, 407 insertions, 108 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index cf5916fe8b..267dfe135d 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -44,9 +44,10 @@ man5dir=$(mandir)/man5 man7dir=$(mandir)/man7 # DESTDIR= -ASCIIDOC=asciidoc +ASCIIDOC = asciidoc ASCIIDOC_EXTRA = MANPAGE_XSL = manpage-normal.xsl +XMLTO = xmlto XMLTO_EXTRA = INSTALL?=install RM ?= rm -f @@ -245,7 +246,7 @@ manpage-base-url.xsl: manpage-base-url.xsl.in %.1 %.5 %.7 : %.xml manpage-base-url.xsl $(QUIET_XMLTO)$(RM) $@ && \ - xmlto -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $< + $(XMLTO) -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $< %.xml : %.txt $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ diff --git a/Documentation/RelNotes/1.7.12.3.txt b/Documentation/RelNotes/1.7.12.3.txt index 8d4f879458..ecda427a35 100644 --- a/Documentation/RelNotes/1.7.12.3.txt +++ b/Documentation/RelNotes/1.7.12.3.txt @@ -4,6 +4,18 @@ Git 1.7.12.3 Release Notes Fixes since v1.7.12.2 --------------------- + * "git am" mishandled a patch attached as application/octet-stream + (e.g. not text/*); Content-Transfer-Encoding (e.g. base64) was not + honored correctly. + + * It was unclear in the documentation for "git blame" that it is + unnecessary for users to use the "--follow" option. + + * A repository created with "git clone --single" had its fetch + refspecs set up just like a clone without "--single", leading the + subsequent "git fetch" to slurp all the other branches, defeating + the whole point of specifying "only this branch". + * "git fetch" over http had an old workaround for an unlikely server misconfiguration; it turns out that this hurts debuggability of the configuration in general, and has been reverted. @@ -12,6 +24,10 @@ Fixes since v1.7.12.2 is much less common, and did not advertise the more common "gzip" on its Accept-Encoding header. + * "git receive-pack" (the counterpart to "git push") did not give + progress output while processing objects it received to the puser + when run over the smart-http protocol. + * "git status" honored the ignore=dirty settings in .gitmodules but "git commit" didn't. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 39d326abc6..b4d6476ac8 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -10,7 +10,8 @@ --depth=<depth>:: Deepen the history of a 'shallow' repository created by `git clone` with `--depth=<depth>` option (see linkgit:git-clone[1]) - by the specified number of commits. + to the specified number of commits from the tip of each remote + branch history. Tags for the deepened commits are not fetched. ifndef::git-pull[] --dry-run:: diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 9c1d395722..fd9e36b99f 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -155,7 +155,7 @@ Configuration The optional configuration variable `core.excludesfile` indicates a path to a file containing patterns of file names to exclude from git-add, similar to $GIT_DIR/info/exclude. Patterns in the exclude file are used in addition to -those in info/exclude. See linkgit:gitrepository-layout[5]. +those in info/exclude. See linkgit:gitignore[5]. EXAMPLES diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index 7ee923629e..e44173f66a 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -20,6 +20,12 @@ last modified the line. Optionally, start annotating from the given revision. The command can also limit the range of lines annotated. +The origin of lines is automatically followed across whole-file +renames (currently there is no option to turn the rename-following +off). To follow lines moved from one file to another, or to follow +lines that were copied and pasted from another file, etc., see the +`-C` and `-M` options. + The report does not tell you anything about lines which have been deleted or replaced; you need to use a tool such as 'git diff' or the "pickaxe" interface briefly mentioned in the following paragraph. diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 47235bea04..4f441311c2 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -129,11 +129,13 @@ This option is only applicable in non-verbose mode. use `git branch --list <pattern>` to list matching branches. -v:: +-vv:: --verbose:: When in list mode, show sha1 and commit subject line for each head, along with relationship to upstream branch (if any). If given twice, print - the name of the upstream branch, as well. + the name of the upstream branch, as well (see also `git remote + show <remote>`). -q:: --quiet:: diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 79fb984144..9f42c0d0e6 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -63,6 +63,10 @@ OPTIONS Remove only files ignored by git. This may be useful to rebuild everything from scratch, but keep manually created files. +SEE ALSO +-------- +linkgit:gitignore[5] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index c1ddd4c2cc..6d98ef3d2a 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -29,7 +29,8 @@ currently active branch. After the clone, a plain `git fetch` without arguments will update all the remote-tracking branches, and a `git pull` without arguments will in addition merge the remote master branch into the -current master branch, if any. +current master branch, if any (this is untrue when "--single-branch" +is given; see below). This default configuration is achieved by creating references to the remote branch heads under `refs/remotes/origin` and @@ -152,9 +153,10 @@ objects from the source repository into a pack in the cloned repository. -b <name>:: Instead of pointing the newly created HEAD to the branch pointed to by the cloned repository's HEAD, point to `<name>` branch - instead. `--branch` can also take tags and treat them like - detached HEAD. In a non-bare repository, this is the branch - that will be checked out. + instead. In a non-bare repository, this is the branch that will + be checked out. + `--branch` can also take tags and detaches the HEAD at that commit + in the resulting repository. --upload-pack <upload-pack>:: -u <upload-pack>:: @@ -193,6 +195,11 @@ objects from the source repository into a pack in the cloned repository. clone with the `--depth` option, this is the default, unless `--no-single-branch` is given to fetch the histories near the tips of all branches. + Further fetches into the resulting repository will only update the + remote tracking branch for the branch this option was used for the + initial cloning. If the HEAD at the remote did not point at any + branch when `--single-branch` clone was made, no remote tracking + branch is created. --recursive:: --recurse-submodules:: diff --git a/Documentation/git.txt b/Documentation/git.txt index 48bd04e22d..d1d227a32d 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,9 +43,10 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.12.2/git.html[documentation for release 1.7.12.2] +* link:v1.7.12.3/git.html[documentation for release 1.7.12.3] * release notes for + link:RelNotes/1.7.12.3.txt[1.7.12.3], link:RelNotes/1.7.12.2.txt[1.7.12.2], link:RelNotes/1.7.12.1.txt[1.7.12.1], link:RelNotes/1.7.12.txt[1.7.12]. diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index e16f3e175b..52ab93d2c2 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -66,6 +66,11 @@ is from the path in question, the lower its precedence). Finally global and system-wide files are considered (they have the lowest precedence). +When the `.gitattributes` file is missing from the work tree, the +path in the index is used as a fall-back. During checkout process, +`.gitattributes` in the index is used and then the file in the +working tree is used as a fall-back. + If you wish to affect only a single repository (i.e., to assign attributes to files that are particular to one user's workflow for that repository), then @@ -927,7 +932,7 @@ file at the toplevel (i.e. not in any subdirectory). The built-in macro attribute "binary" is equivalent to: ------------ -[attr]binary -diff -text +[attr]binary -diff -merge -text ------------ diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index f6ba90c2da..3bc1500eda 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -93,7 +93,7 @@ ENHANCED OPTION PARSER From the git 1.5.4 series and further, many git commands (not all of them at the time of the writing though) come with an enhanced option parser. -Here is an exhaustive list of the facilities provided by this option parser. +Here is a list of the facilities provided by this option parser. Magic Options @@ -137,6 +137,16 @@ options. This means that you can for example use `git rm -rf` or `git clean -fdx`. +Abbreviating long options +~~~~~~~~~~~~~~~~~~~~~~~~~ +Commands that support the enhanced option parser accepts unique +prefix of a long option as if it is fully spelled out, but use this +with a caution. For example, `git commit --amen` behaves as if you +typed `git commit --amend`, but that is true only until a later version +of Git introduces another option that shares the same prefix, +e.g `git commit --amenity" option. + + Separating argument from the option ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You can write the mandatory option parameter to an option as a separate diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index c1f692a71e..1b82fe1969 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -41,18 +41,24 @@ precedence, the last matching pattern decides the outcome): variable 'core.excludesfile'. Which file to place a pattern in depends on how the pattern is meant to -be used. Patterns which should be version-controlled and distributed to -other repositories via clone (i.e., files that all developers will want -to ignore) should go into a `.gitignore` file. Patterns which are -specific to a particular repository but which do not need to be shared -with other related repositories (e.g., auxiliary files that live inside -the repository but are specific to one user's workflow) should go into -the `$GIT_DIR/info/exclude` file. Patterns which a user wants git to -ignore in all situations (e.g., backup or temporary files generated by -the user's editor of choice) generally go into a file specified by -`core.excludesfile` in the user's `~/.gitconfig`. Its default value is -$XDG_CONFIG_HOME/git/ignore. If $XDG_CONFIG_HOME is either not set or empty, -$HOME/.config/git/ignore is used instead. +be used. + + * Patterns which should be version-controlled and distributed to + other repositories via clone (i.e., files that all developers will want + to ignore) should go into a `.gitignore` file. + + * Patterns which are + specific to a particular repository but which do not need to be shared + with other related repositories (e.g., auxiliary files that live inside + the repository but are specific to one user's workflow) should go into + the `$GIT_DIR/info/exclude` file. + + * Patterns which a user wants git to + ignore in all situations (e.g., backup or temporary files generated by + the user's editor of choice) generally go into a file specified by + `core.excludesfile` in the user's `~/.gitconfig`. Its default value is + $XDG_CONFIG_HOME/git/ignore. If $XDG_CONFIG_HOME is either not set or + empty, $HOME/.config/git/ignore is used instead. The underlying git plumbing tools, such as 'git ls-files' and 'git read-tree', read @@ -68,11 +74,15 @@ PATTERN FORMAT for readability. - A line starting with # serves as a comment. + Put a backslash ("`\`") in front of the first hash for patterns + that begin with a hash. - - An optional prefix '!' which negates the pattern; any + - An optional prefix "`!`" which negates the pattern; any matching file excluded by a previous pattern will become included again. If a negated pattern matches, this will override lower precedence patterns sources. + Put a backslash ("`\`") in front of the first "`!`" for patterns + that begin with a literal "`!`", for example, "`\!important!.txt`". - If the pattern ends with a slash, it is removed for the purpose of the following description, but it would only find diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 595a3cf1a7..66db80296f 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -32,13 +32,14 @@ ours;; This option forces conflicting hunks to be auto-resolved cleanly by favoring 'our' version. Changes from the other tree that do not conflict with our side are reflected to the merge result. + For a binary file, the entire contents are taken from our side. + This should not be confused with the 'ours' merge strategy, which does not even look at what the other tree contains at all. It discards everything the other tree did, declaring 'our' history contains all that happened in it. theirs;; - This is opposite of 'ours'. + This is the opposite of 'ours'. patience;; With this option, 'merge-recursive' spends a little extra time diff --git a/GIT-VERSION-GEN b/GIT-VERSION-GEN index d98481a10c..ecdbf905a3 100755 --- a/GIT-VERSION-GEN +++ b/GIT-VERSION-GEN @@ -1,7 +1,7 @@ #!/bin/sh GVF=GIT-VERSION-FILE -DEF_VER=v1.7.12.2 +DEF_VER=v1.7.12.3 LF=' ' @@ -306,7 +306,7 @@ static void free_attr_elem(struct attr_stack *e) } static const char *builtin_attr[] = { - "[attr]binary -diff -text", + "[attr]binary -diff -merge -text", NULL, }; diff --git a/builtin/clone.c b/builtin/clone.c index e314b0b6d2..0d663e34f7 100644 --- a/builtin/clone.c +++ b/builtin/clone.c @@ -610,6 +610,54 @@ static void write_config(struct string_list *config) } } +static void write_refspec_config(const char* src_ref_prefix, + const struct ref* our_head_points_at, + const struct ref* remote_head_points_at, struct strbuf* branch_top) +{ + struct strbuf key = STRBUF_INIT; + struct strbuf value = STRBUF_INIT; + + if (option_mirror || !option_bare) { + if (option_single_branch && !option_mirror) { + if (option_branch) { + if (strstr(our_head_points_at->name, "refs/tags/")) + strbuf_addf(&value, "+%s:%s", our_head_points_at->name, + our_head_points_at->name); + else + strbuf_addf(&value, "+%s:%s%s", our_head_points_at->name, + branch_top->buf, option_branch); + } else if (remote_head_points_at) { + strbuf_addf(&value, "+%s:%s%s", remote_head_points_at->name, + branch_top->buf, + skip_prefix(remote_head_points_at->name, "refs/heads/")); + } + /* + * otherwise, the next "git fetch" will + * simply fetch from HEAD without updating + * any remote tracking branch, which is what + * we want. + */ + } else { + strbuf_addf(&value, "+%s*:%s*", src_ref_prefix, branch_top->buf); + } + /* Configure the remote */ + if (value.len) { + strbuf_addf(&key, "remote.%s.fetch", option_origin); + git_config_set_multivar(key.buf, value.buf, "^$", 0); + strbuf_reset(&key); + + if (option_mirror) { + strbuf_addf(&key, "remote.%s.mirror", option_origin); + git_config_set(key.buf, "true"); + strbuf_reset(&key); + } + } + } + + strbuf_release(&key); + strbuf_release(&value); +} + int cmd_clone(int argc, const char **argv, const char *prefix) { int is_bundle = 0, is_local; @@ -755,20 +803,6 @@ int cmd_clone(int argc, const char **argv, const char *prefix) } strbuf_addf(&value, "+%s*:%s*", src_ref_prefix, branch_top.buf); - - if (option_mirror || !option_bare) { - /* Configure the remote */ - strbuf_addf(&key, "remote.%s.fetch", option_origin); - git_config_set_multivar(key.buf, value.buf, "^$", 0); - strbuf_reset(&key); - - if (option_mirror) { - strbuf_addf(&key, "remote.%s.mirror", option_origin); - git_config_set(key.buf, "true"); - strbuf_reset(&key); - } - } - strbuf_addf(&key, "remote.%s.url", option_origin); git_config_set(key.buf, repo); strbuf_reset(&key); @@ -853,6 +887,9 @@ int cmd_clone(int argc, const char **argv, const char *prefix) "refs/heads/master"); } + write_refspec_config(src_ref_prefix, our_head_points_at, + remote_head_points_at, &branch_top); + if (is_local) clone_local(path, git_dir); else if (refs && complete_refs_before_fetch) diff --git a/builtin/commit.c b/builtin/commit.c index 62028e7b44..7a83cae6ff 100644 --- a/builtin/commit.c +++ b/builtin/commit.c @@ -1452,6 +1452,7 @@ int cmd_commit(int argc, const char **argv, const char *prefix) usage_with_options(builtin_commit_usage, builtin_commit_options); wt_status_prepare(&s); + gitmodules_config(); git_config(git_commit_config, &s); determine_whence(&s); s.colopts = 0; diff --git a/builtin/mailinfo.c b/builtin/mailinfo.c index 9973bd9099..fe128572f7 100644 --- a/builtin/mailinfo.c +++ b/builtin/mailinfo.c @@ -19,9 +19,6 @@ static struct strbuf email = STRBUF_INIT; static enum { TE_DONTCARE, TE_QP, TE_BASE64 } transfer_encoding; -static enum { - TYPE_TEXT, TYPE_OTHER -} message_type; static struct strbuf charset = STRBUF_INIT; static int patch_lines; @@ -184,8 +181,6 @@ static void handle_content_type(struct strbuf *line) struct strbuf *boundary = xmalloc(sizeof(struct strbuf)); strbuf_init(boundary, line->len); - if (!strcasestr(line->buf, "text/")) - message_type = TYPE_OTHER; if (slurp_attr(line->buf, "boundary=", boundary)) { strbuf_insert(boundary, 0, "--", 2); if (++content_top > &content[MAX_BOUNDARIES]) { @@ -681,7 +676,6 @@ again: /* set some defaults */ transfer_encoding = TE_DONTCARE; strbuf_reset(&charset); - message_type = TYPE_TEXT; /* slurp in this section's info */ while (read_one_header_line(&line, fin)) @@ -895,11 +889,6 @@ static void handle_body(void) strbuf_insert(&line, 0, prev.buf, prev.len); strbuf_reset(&prev); - /* binary data most likely doesn't have newlines */ - if (message_type != TYPE_TEXT) { - handle_filter(&line); - break; - } /* * This is a decoded line that may contain * multiple new lines. Pass only one chunk diff --git a/builtin/receive-pack.c b/builtin/receive-pack.c index 2cb854feb4..165a633204 100644 --- a/builtin/receive-pack.c +++ b/builtin/receive-pack.c @@ -701,7 +701,7 @@ static void execute_commands(struct command *commands, const char *unpacker_erro if (unpacker_error) { for (cmd = commands; cmd; cmd = cmd->next) - cmd->error_string = "n/a (unpacker error)"; + cmd->error_string = "unpacker error"; return; } @@ -801,7 +801,7 @@ static const char *parse_pack_header(struct pack_header *hdr) static const char *pack_lockfile; -static const char *unpack(void) +static const char *unpack(int err_fd) { struct pack_header hdr; const char *hdr_err; @@ -821,6 +821,7 @@ static const char *unpack(void) if (ntohl(hdr.hdr_entries) < unpack_limit) { int code, i = 0; + struct child_process child; const char *unpacker[5]; unpacker[i++] = "unpack-objects"; if (quiet) @@ -829,7 +830,12 @@ static const char *unpack(void) unpacker[i++] = "--strict"; unpacker[i++] = hdr_arg; unpacker[i++] = NULL; - code = run_command_v_opt(unpacker, RUN_GIT_CMD); + memset(&child, 0, sizeof(child)); + child.argv = unpacker; + child.no_stdout = 1; + child.err = err_fd; + child.git_cmd = 1; + code = run_command(&child); if (!code) return NULL; return "unpack-objects abnormal exit"; @@ -854,6 +860,7 @@ static const char *unpack(void) memset(&ip, 0, sizeof(ip)); ip.argv = keeper; ip.out = -1; + ip.err = err_fd; ip.git_cmd = 1; status = start_command(&ip); if (status) { @@ -870,6 +877,26 @@ static const char *unpack(void) } } +static const char *unpack_with_sideband(void) +{ + struct async muxer; + const char *ret; + + if (!use_sideband) + return unpack(0); + + memset(&muxer, 0, sizeof(muxer)); + muxer.proc = copy_to_sideband; + muxer.in = -1; + if (start_async(&muxer)) + return NULL; + + ret = unpack(muxer.in); + + finish_async(&muxer); + return ret; +} + static void report(struct command *commands, const char *unpack_status) { struct command *cmd; @@ -967,7 +994,7 @@ int cmd_receive_pack(int argc, const char **argv, const char *prefix) const char *unpack_status = NULL; if (!delete_only(commands)) - unpack_status = unpack(); + unpack_status = unpack_with_sideband(); execute_commands(commands, unpack_status); if (pack_lockfile) unlink_or_warn(pack_lockfile); diff --git a/contrib/hooks/post-receive-email b/contrib/hooks/post-receive-email index 01af9df15e..b2171a092e 100755 --- a/contrib/hooks/post-receive-email +++ b/contrib/hooks/post-receive-email @@ -403,7 +403,7 @@ generate_update_branch_email() echo " \\" echo " O -- O -- O ($oldrev)" echo "" - echo "The removed revisions are not necessarilly gone - if another reference" + echo "The removed revisions are not necessarily gone - if another reference" echo "still refers to them they will stay in the repository." rewind_only=1 else diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 7f8c1878d4..10ed9e51a5 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -8028,7 +8028,7 @@ sub git_feed { %latest_commit = %{$commitlist[0]}; my $latest_epoch = $latest_commit{'committer_epoch'}; exit_if_unmodified_since($latest_epoch); - %latest_date = parse_date($latest_epoch, $latest_commit{'comitter_tz'}); + %latest_date = parse_date($latest_epoch, $latest_commit{'committer_tz'}); } print $cgi->header( -type => $content_type, diff --git a/ll-merge.c b/ll-merge.c index f3f7692158..acea33bf1b 100644 --- a/ll-merge.c +++ b/ll-merge.c @@ -35,7 +35,7 @@ struct ll_merge_driver { */ static int ll_binary_merge(const struct ll_merge_driver *drv_unused, mmbuffer_t *result, - const char *path_unused, + const char *path, mmfile_t *orig, const char *orig_name, mmfile_t *src1, const char *name1, mmfile_t *src2, const char *name2, @@ -46,16 +46,34 @@ static int ll_binary_merge(const struct ll_merge_driver *drv_unused, assert(opts); /* - * The tentative merge result is "ours" for the final round, - * or common ancestor for an internal merge. Still return - * "conflicted merge" status. + * The tentative merge result is the or common ancestor for an internal merge. */ - stolen = opts->virtual_ancestor ? orig : src1; + if (opts->virtual_ancestor) { + stolen = orig; + } else { + switch (opts->variant) { + default: + warning("Cannot merge binary files: %s (%s vs. %s)", + path, name1, name2); + /* fallthru */ + case XDL_MERGE_FAVOR_OURS: + stolen = src1; + break; + case XDL_MERGE_FAVOR_THEIRS: + stolen = src2; + break; + } + } result->ptr = stolen->ptr; result->size = stolen->size; stolen->ptr = NULL; - return 1; + + /* + * With -Xtheirs or -Xours, we have cleanly merged; + * otherwise we got a conflict. + */ + return (opts->variant ? 0 : 1); } static int ll_xdl_merge(const struct ll_merge_driver *drv_unused, @@ -73,8 +91,6 @@ static int ll_xdl_merge(const struct ll_merge_driver *drv_unused, if (buffer_is_binary(orig->ptr, orig->size) || buffer_is_binary(src1->ptr, src1->size) || buffer_is_binary(src2->ptr, src2->size)) { - warning("Cannot merge binary files: %s (%s vs. %s)", - path, name1, name2); return ll_binary_merge(drv_unused, result, path, orig, orig_name, @@ -55,7 +55,7 @@ msgstr "Konnte '%s' nicht öffnen" #: bundle.c:140 msgid "Repository lacks these prerequisite commits:" -msgstr "Dem Projektarchiv fehlen folgende vorrausgesetzte Versionen:" +msgstr "Dem Projektarchiv fehlen folgende vorausgesetzte Versionen:" #: bundle.c:164 sequencer.c:550 sequencer.c:982 builtin/log.c:290 #: builtin/log.c:726 builtin/log.c:1316 builtin/log.c:1535 builtin/merge.c:347 @@ -1758,7 +1758,7 @@ msgstr "Anzahl" #: builtin/apply.c:4291 msgid "remove <num> leading slashes from traditional diff paths" msgstr "" -"entfernt <Anzahl> vorrangestellte Schrägstriche von herkömmlichen " +"entfernt <Anzahl> vorangestellte Schrägstriche von herkömmlichen " "Differenzpfaden" #: builtin/apply.c:4294 @@ -2065,7 +2065,7 @@ msgstr "Konnte einige Referenzen nicht lesen" #: builtin/branch.c:613 msgid "cannot rename the current branch while not on any." msgstr "" -"Kann aktuellen Zweig nicht umbennen, solange du dich auf keinem befindest." +"Kann aktuellen Zweig nicht umbenennen, solange du dich auf keinem befindest." #: builtin/branch.c:623 #, c-format @@ -2353,7 +2353,7 @@ msgid "" "git checkout: --ours/--theirs, --force and --merge are incompatible when\n" "checking out of the index." msgstr "" -"git checkout: --ours/--theirs, --force and --merge sind inkompatibel wenn\n" +"git checkout: --ours/--theirs, --force und --merge sind inkompatibel wenn\n" "du aus der Bereitstellung auscheckst." #: builtin/checkout.c:1093 @@ -3666,7 +3666,7 @@ msgstr "Konnte %s nicht nach %s verschieben" #: builtin/init-db.c:363 #, c-format msgid "Could not create git link %s" -msgstr "Konnte git-Verknüfung %s nicht erstellen" +msgstr "Konnte git-Verknüpfung %s nicht erstellen" #. #. * TRANSLATORS: The first '%s' is either "Reinitialized @@ -3778,11 +3778,11 @@ msgstr "unechte Einreicher-Informationen %s" #: builtin/log.c:1205 msgid "-n and -k are mutually exclusive." -msgstr "-n und -k schliessen sich gegenseitig aus" +msgstr "-n und -k schließen sich gegenseitig aus" #: builtin/log.c:1207 msgid "--subject-prefix and -k are mutually exclusive." -msgstr "--subject-prefix und -k schliessen sich gegenseitig aus" +msgstr "--subject-prefix und -k schließen sich gegenseitig aus" #: builtin/log.c:1215 msgid "--name-only does not make sense" diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index ccb5435b2a..741b6b6d16 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -18,16 +18,6 @@ swapping compression and hashing order, the person who is making the modification *should* take notice and update the test vectors here. ' -################################################################ -# It appears that people try to run tests without building... - -../git >/dev/null -if test $? != 1 -then - echo >&2 'You do not seem to have built git yet.' - exit 1 -fi - . ./test-lib.sh ################################################################ diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index bf7a2cd6fb..08aa24ca15 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -177,9 +177,7 @@ test_expect_success 'tag pointing to something else than its type' ' test_when_finished "remove_object $tag" && echo $tag >.git/refs/tags/wrong && test_when_finished "git update-ref -d refs/tags/wrong" && - test_must_fail git fsck --tags 2>out && - cat out && - grep "error in tag.*broken links" out + test_must_fail git fsck --tags ' test_expect_success 'cleaned up' ' diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index 250c720c14..418f515ada 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -159,7 +159,7 @@ test_expect_success 'receive-pack runs auto-gc in remote repo' ' git commit -a -m "Second commit" && git repack ) && - cp -a parent child && + cp -R parent child && ( # Set the child to auto-pack if more than one pack exists cd child && diff --git a/t/t5504-fetch-receive-strict.sh b/t/t5504-fetch-receive-strict.sh index 35ec294d9a..69ee13c8be 100755 --- a/t/t5504-fetch-receive-strict.sh +++ b/t/t5504-fetch-receive-strict.sh @@ -89,7 +89,7 @@ test_expect_success 'push with !receive.fsckobjects' ' cat >exp <<EOF To dst -! refs/heads/master:refs/heads/test [remote rejected] (n/a (unpacker error)) +! refs/heads/master:refs/heads/test [remote rejected] (unpacker error) EOF test_expect_success 'push with receive.fsckobjects' ' diff --git a/t/t5550-http-fetch.sh b/t/t5550-http-fetch.sh index 16ef0419e9..80d20c876b 100755 --- a/t/t5550-http-fetch.sh +++ b/t/t5550-http-fetch.sh @@ -22,7 +22,7 @@ test_expect_success 'setup repository' ' ' test_expect_success 'create http-accessible bare repository with loose objects' ' - cp -a .git "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + cp -R .git "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && (cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && git config core.bare true && mkdir -p hooks && diff --git a/t/t5709-clone-refspec.sh b/t/t5709-clone-refspec.sh new file mode 100755 index 0000000000..6f1ea984d4 --- /dev/null +++ b/t/t5709-clone-refspec.sh @@ -0,0 +1,156 @@ +#!/bin/sh + +test_description='test refspec written by clone-command' +. ./test-lib.sh + +test_expect_success 'setup' ' + # Make two branches, "master" and "side" + echo one >file && + git add file && + git commit -m one && + echo two >file && + git commit -a -m two && + git tag two && + echo three >file && + git commit -a -m three && + git checkout -b side && + echo four >file && + git commit -a -m four && + git checkout master && + + # default clone + git clone . dir_all && + + # default --single that follows HEAD=master + git clone --single-branch . dir_master && + + # default --single that follows HEAD=side + git checkout side && + git clone --single-branch . dir_side && + + # explicit --single that follows side + git checkout master && + git clone --single-branch --branch side . dir_side2 && + + # default --single with --mirror + git clone --single-branch --mirror . dir_mirror && + + # default --single with --branch and --mirror + git clone --single-branch --mirror --branch side . dir_mirror_side && + + # --single that does not know what branch to follow + git checkout two^ && + git clone --single-branch . dir_detached && + + # explicit --single with tag + git clone --single-branch --branch two . dir_tag && + + # advance both "master" and "side" branches + git checkout side && + echo five >file && + git commit -a -m five && + git checkout master && + echo six >file && + git commit -a -m six && + + # update tag + git tag -d two && git tag two +' + +test_expect_success 'by default all branches will be kept updated' ' + ( + cd dir_all && git fetch && + git for-each-ref refs/remotes/origin | + sed -e "/HEAD$/d" \ + -e "s|/remotes/origin/|/heads/|" >../actual + ) && + # follow both master and side + git for-each-ref refs/heads >expect && + test_cmp expect actual +' + +test_expect_success 'by default no tags will be kept updated' ' + ( + cd dir_all && git fetch && + git for-each-ref refs/tags >../actual + ) && + git for-each-ref refs/tags >expect && + test_must_fail test_cmp expect actual +' + +test_expect_success '--single-branch while HEAD pointing at master' ' + ( + cd dir_master && git fetch && + git for-each-ref refs/remotes/origin | + sed -e "/HEAD$/d" \ + -e "s|/remotes/origin/|/heads/|" >../actual + ) && + # only follow master + git for-each-ref refs/heads/master >expect && + test_cmp expect actual +' + +test_expect_success '--single-branch while HEAD pointing at side' ' + ( + cd dir_side && git fetch && + git for-each-ref refs/remotes/origin | + sed -e "/HEAD$/d" \ + -e "s|/remotes/origin/|/heads/|" >../actual + ) && + # only follow side + git for-each-ref refs/heads/side >expect && + test_cmp expect actual +' + +test_expect_success '--single-branch with explicit --branch side' ' + ( + cd dir_side2 && git fetch && + git for-each-ref refs/remotes/origin | + sed -e "/HEAD$/d" \ + -e "s|/remotes/origin/|/heads/|" >../actual + ) && + # only follow side + git for-each-ref refs/heads/side >expect && + test_cmp expect actual +' + +test_expect_success '--single-branch with explicit --branch with tag fetches updated tag' ' + ( + cd dir_tag && git fetch && + git for-each-ref refs/tags >../actual + ) && + git for-each-ref refs/tags >expect && + test_cmp expect actual +' + +test_expect_success '--single-branch with --mirror' ' + ( + cd dir_mirror && git fetch && + git for-each-ref refs > ../actual + ) && + git for-each-ref refs >expect && + test_cmp expect actual +' + +test_expect_success '--single-branch with explicit --branch and --mirror' ' + ( + cd dir_mirror_side && git fetch && + git for-each-ref refs > ../actual + ) && + git for-each-ref refs >expect && + test_cmp expect actual +' + +test_expect_success '--single-branch with detached' ' + ( + cd dir_detached && git fetch && + git for-each-ref refs/remotes/origin | + sed -e "/HEAD$/d" \ + -e "s|/remotes/origin/|/heads/|" >../actual + ) + # nothing + >expect && + test_cmp expect actual +' + +test_done diff --git a/t/t5800-remote-helpers.sh b/t/t5800-remote-helpers.sh index 5702334510..e7dc668cef 100755 --- a/t/t5800-remote-helpers.sh +++ b/t/t5800-remote-helpers.sh @@ -76,7 +76,7 @@ test_expect_success 'pushing to local repo' ' # git-remote-testgit, but is too slow to leave in for general use. : test_expect_success 'racily pushing to local repo' ' test_when_finished "rm -rf server2 localclone2" && - cp -a server server2 && + cp -R server server2 && git clone "testgit::${PWD}/server2" localclone2 && (cd localclone2 && echo content >>file && diff --git a/t/t6037-merge-ours-theirs.sh b/t/t6037-merge-ours-theirs.sh index 2cf42c73f1..3889eca4ae 100755 --- a/t/t6037-merge-ours-theirs.sh +++ b/t/t6037-merge-ours-theirs.sh @@ -53,7 +53,19 @@ test_expect_success 'recursive favouring ours' ' ! grep 1 file ' -test_expect_success 'pull with -X' ' +test_expect_success 'binary file with -Xours/-Xtheirs' ' + echo file binary >.gitattributes && + + git reset --hard master && + git merge -s recursive -X theirs side && + git diff --exit-code side HEAD -- file && + + git reset --hard master && + git merge -s recursive -X ours side && + git diff --exit-code master HEAD -- file +' + +test_expect_success 'pull passes -X to underlying merge' ' git reset --hard master && git pull -s recursive -Xours . side && git reset --hard master && git pull -s recursive -X ours . side && git reset --hard master && git pull -s recursive -Xtheirs . side && diff --git a/t/test-lib.sh b/t/test-lib.sh index 78c428619e..b8ee3486b1 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -15,22 +15,6 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see http://www.gnu.org/licenses/ . -# if --tee was passed, write the output not only to the terminal, but -# additionally to the file test-results/$BASENAME.out, too. -case "$GIT_TEST_TEE_STARTED, $* " in -done,*) - # do not redirect again - ;; -*' --tee '*|*' --va'*) - mkdir -p test-results - BASE=test-results/$(basename "$0" .sh) - (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1; - echo $? > $BASE.exit) | tee $BASE.out - test "$(cat $BASE.exit)" = 0 - exit - ;; -esac - # Keep the original TERM for say_color ORIGINAL_TERM=$TERM @@ -51,9 +35,34 @@ then fi GIT_BUILD_DIR="$TEST_DIRECTORY"/.. +################################################################ +# It appears that people try to run tests without building... +"$GIT_BUILD_DIR/git" >/dev/null +if test $? != 1 +then + echo >&2 'error: you do not seem to have built git yet.' + exit 1 +fi + . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS export PERL_PATH SHELL_PATH +# if --tee was passed, write the output not only to the terminal, but +# additionally to the file test-results/$BASENAME.out, too. +case "$GIT_TEST_TEE_STARTED, $* " in +done,*) + # do not redirect again + ;; +*' --tee '*|*' --va'*) + mkdir -p test-results + BASE=test-results/$(basename "$0" .sh) + (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1; + echo $? > $BASE.exit) | tee $BASE.out + test "$(cat $BASE.exit)" = 0 + exit + ;; +esac + # For repeatability, reset the environment to known value. LANG=C LC_ALL=C |